- Move the arch-specific code into arch/arm64/kvm
- Start the post-32bit cleanup
- Cherry-pick a few non-invasive pre-NV patches
x86:
- Rework of TLB flushing
- Rework of event injection, especially with respect to nested virtualization
- Nested AMD event injection facelift, building on the rework of generic code
and fixing a lot of corner cases
- Nested AMD live migration support
- Optimization for TSC deadline MSR writes and IPIs
- Various cleanups
- Asynchronous page fault cleanups (from tglx, common topic branch with tip tree)
- Interrupt-based delivery of asynchronous "page ready" events (host side)
- Hyper-V MSRs and hypercalls for guest debugging
- VMX preemption timer fixes
s390:
- Cleanups
Generic:
- switch vCPU thread wakeup from swait to rcuwait
The other architectures, and the guest side of the asynchronous page fault
work, will come next week.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl7VJcYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPf6QgAq4wU5wdd1lTGz/i3DIhNVJNJgJlp
ozLzRdMaJbdbn5RpAK6PEBd9+pt3+UlojpFB3gpJh2Nazv2OzV4yLQgXXXyyMEx1
5Hg7b4UCJYDrbkCiegNRv7f/4FWDkQ9dx++RZITIbxeskBBCEI+I7GnmZhGWzuC4
7kj4ytuKAySF2OEJu0VQF6u0CvrNYfYbQIRKBXjtOwuRK4Q6L63FGMJpYo159MBQ
asg3B1jB5TcuGZ9zrjL5LkuzaP4qZZHIRs+4kZsH9I6MODHGUxKonrkablfKxyKy
CFK+iaHCuEXXty5K0VmWM3nrTfvpEjVjbMc7e1QGBQ5oXsDM0pqn84syRg==
=v7Wn
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Move the arch-specific code into arch/arm64/kvm
- Start the post-32bit cleanup
- Cherry-pick a few non-invasive pre-NV patches
x86:
- Rework of TLB flushing
- Rework of event injection, especially with respect to nested
virtualization
- Nested AMD event injection facelift, building on the rework of
generic code and fixing a lot of corner cases
- Nested AMD live migration support
- Optimization for TSC deadline MSR writes and IPIs
- Various cleanups
- Asynchronous page fault cleanups (from tglx, common topic branch
with tip tree)
- Interrupt-based delivery of asynchronous "page ready" events (host
side)
- Hyper-V MSRs and hypercalls for guest debugging
- VMX preemption timer fixes
s390:
- Cleanups
Generic:
- switch vCPU thread wakeup from swait to rcuwait
The other architectures, and the guest side of the asynchronous page
fault work, will come next week"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (256 commits)
KVM: selftests: fix rdtsc() for vmx_tsc_adjust_test
KVM: check userspace_addr for all memslots
KVM: selftests: update hyperv_cpuid with SynDBG tests
x86/kvm/hyper-v: Add support for synthetic debugger via hypercalls
x86/kvm/hyper-v: enable hypercalls regardless of hypercall page
x86/kvm/hyper-v: Add support for synthetic debugger interface
x86/hyper-v: Add synthetic debugger definitions
KVM: selftests: VMX preemption timer migration test
KVM: nVMX: Fix VMX preemption timer migration
x86/kvm/hyper-v: Explicitly align hcall param for kvm_hyperv_exit
KVM: x86/pmu: Support full width counting
KVM: x86/pmu: Tweak kvm_pmu_get_msr to pass 'struct msr_data' in
KVM: x86: announce KVM_FEATURE_ASYNC_PF_INT
KVM: x86: acknowledgment mechanism for async pf page ready notifications
KVM: x86: interrupt based APF 'page ready' event delivery
KVM: introduce kvm_read_guest_offset_cached()
KVM: rename kvm_arch_can_inject_async_page_present() to kvm_arch_can_dequeue_async_page_present()
KVM: x86: extend struct kvm_vcpu_pv_apf_data with token info
Revert "KVM: async_pf: Fix #DF due to inject "Page not Present" and "Page Ready" exceptions simultaneously"
KVM: VMX: Replace zero-length array with flexible-array
...
- added support for MIPSr5 and P5600 cores
- converted Loongson PCI driver into a PCI host driver using the generic
PCI framework
- added emulation of CPUCFG command for Loogonson64 cpus
- removed of LASAT, PMC MSP71xx and NEC MARKEINS/EMMA
- ioremap cleanup
- fix for a race between two threads faulting the same page
- various cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=eAtN
-----END PGP SIGNATURE-----
Merge tag 'mips_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- added support for MIPSr5 and P5600 cores
- converted Loongson PCI driver into a PCI host driver using the
generic PCI framework
- added emulation of CPUCFG command for Loogonson64 cpus
- removed of LASAT, PMC MSP71xx and NEC MARKEINS/EMMA
- ioremap cleanup
- fix for a race between two threads faulting the same page
- various cleanups and fixes
* tag 'mips_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (143 commits)
MIPS: ralink: drop ralink_clk_init for mt7621
MIPS: ralink: bootrom: mark a function as __init to save some memory
MIPS: Loongson64: Reorder CPUCFG model match arms
MIPS: Expose Loongson CPUCFG availability via HWCAP
MIPS: Loongson64: Guard against future cores without CPUCFG
MIPS: Fix build warning about "PTR_STR" redefinition
MIPS: Loongson64: Remove not used pci.c
MIPS: Loongson64: Define PCI_IOBASE
MIPS: CPU_LOONGSON2EF need software to maintain cache consistency
MIPS: DTS: Fix build errors used with various configs
MIPS: Loongson64: select NO_EXCEPT_FILL
MIPS: Fix IRQ tracing when call handle_fpe() and handle_msa_fpe()
MIPS: mm: add page valid judgement in function pte_modify
mm/memory.c: Add memory read privilege on page fault handling
mm/memory.c: Update local TLB if PTE entry exists
MIPS: Do not flush tlb page when updating PTE entry
MIPS: ingenic: Default to a generic board
MIPS: ingenic: Add support for GCW Zero prototype
MIPS: ingenic: DTS: Add memory info of GCW Zero
MIPS: Loongson64: Switch to generic PCI driver
...
-----BEGIN PGP SIGNATURE-----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=H+/Z
-----END PGP SIGNATURE-----
Merge tag 'for-5.8/drivers-2020-06-01' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"On top of the core changes, here are the block driver changes for this
merge window:
- NVMe changes:
- NVMe over Fibre Channel protocol updates, which also reach
over to drivers/scsi/lpfc (James Smart)
- namespace revalidation support on the target (Anthony
Iliopoulos)
- gcc zero length array fix (Arnd Bergmann)
- nvmet cleanups (Chaitanya Kulkarni)
- misc cleanups and fixes (me, Keith Busch, Sagi Grimberg)
- use a SRQ per completion vector (Max Gurtovoy)
- fix handling of runtime changes to the queue count (Weiping
Zhang)
- t10 protection information support for nvme-rdma and
nvmet-rdma (Israel Rukshin and Max Gurtovoy)
- target side AEN improvements (Chaitanya Kulkarni)
- various fixes and minor improvements all over, icluding the
nvme part of the lpfc driver"
- Floppy code cleanup series (Willy, Denis)
- Floppy contention fix (Jiri)
- Loop CONFIGURE support (Martijn)
- bcache fixes/improvements (Coly, Joe, Colin)
- q->queuedata cleanups (Christoph)
- Get rid of ioctl_by_bdev (Christoph, Stefan)
- md/raid5 allocation fixes (Coly)
- zero length array fixes (Gustavo)
- swim3 task state fix (Xu)"
* tag 'for-5.8/drivers-2020-06-01' of git://git.kernel.dk/linux-block: (166 commits)
bcache: configure the asynchronous registertion to be experimental
bcache: asynchronous devices registration
bcache: fix refcount underflow in bcache_device_free()
bcache: Convert pr_<level> uses to a more typical style
bcache: remove redundant variables i and n
lpfc: Fix return value in __lpfc_nvme_ls_abort
lpfc: fix axchg pointer reference after free and double frees
lpfc: Fix pointer checks and comments in LS receive refactoring
nvme: set dma alignment to qword
nvmet: cleanups the loop in nvmet_async_events_process
nvmet: fix memory leak when removing namespaces and controllers concurrently
nvmet-rdma: add metadata/T10-PI support
nvmet: add metadata support for block devices
nvmet: add metadata/T10-PI support
nvme: add Metadata Capabilities enumerations
nvmet: rename nvmet_check_data_len to nvmet_check_transfer_len
nvmet: rename nvmet_rw_len to nvmet_rw_data_len
nvmet: add metadata characteristics for a namespace
nvme-rdma: add metadata/T10-PI support
nvme-rdma: introduce nvme_rdma_sgl structure
...
Pull vfs updates from Al Viro:
"Assorted patches from Miklos.
An interesting part here is /proc/mounts stuff..."
The "/proc/mounts stuff" is using a cursor for keeeping the location
data while traversing the mount listing.
Also probably worth noting is the addition of faccessat2(), which takes
an additional set of flags to specify how the lookup is done
(AT_EACCESS, AT_SYMLINK_NOFOLLOW, AT_EMPTY_PATH).
* 'from-miklos' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: add faccessat2 syscall
vfs: don't parse "silent" option
vfs: don't parse "posixacl" option
vfs: don't parse forbidden flags
statx: add mount_root
statx: add mount ID
statx: don't clear STATX_ATIME on SB_RDONLY
uapi: deprecate STATX_ALL
utimensat: AT_EMPTY_PATH support
vfs: split out access_override_creds()
proc/mounts: add cursor
aio: fix async fsync creds
vfs: allow unprivileged whiteout creation
Pull crypto updates from Herbert Xu:
"API:
- Introduce crypto_shash_tfm_digest() and use it wherever possible.
- Fix use-after-free and race in crypto_spawn_alg.
- Add support for parallel and batch requests to crypto_engine.
Algorithms:
- Update jitter RNG for SP800-90B compliance.
- Always use jitter RNG as seed in drbg.
Drivers:
- Add Arm CryptoCell driver cctrng.
- Add support for SEV-ES to the PSP driver in ccp"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (114 commits)
crypto: hisilicon - fix driver compatibility issue with different versions of devices
crypto: engine - do not requeue in case of fatal error
crypto: cavium/nitrox - Fix a typo in a comment
crypto: hisilicon/qm - change debugfs file name from qm_regs to regs
crypto: hisilicon/qm - add DebugFS for xQC and xQE dump
crypto: hisilicon/zip - add debugfs for Hisilicon ZIP
crypto: hisilicon/hpre - add debugfs for Hisilicon HPRE
crypto: hisilicon/sec2 - add debugfs for Hisilicon SEC
crypto: hisilicon/qm - add debugfs to the QM state machine
crypto: hisilicon/qm - add debugfs for QM
crypto: stm32/crc32 - protect from concurrent accesses
crypto: stm32/crc32 - don't sleep in runtime pm
crypto: stm32/crc32 - fix multi-instance
crypto: stm32/crc32 - fix run-time self test issue.
crypto: stm32/crc32 - fix ext4 chksum BUG_ON()
crypto: hisilicon/zip - Use temporary sqe when doing work
crypto: hisilicon - add device error report through abnormal irq
crypto: hisilicon - remove codes of directly report device errors through MSI
crypto: hisilicon - QM memory management optimization
crypto: hisilicon - unify initial value assignment into QM
...
ralink_clk_init is only called in arch/mips/ralink/clk.c which isn't
compiled for mt7621. And it doesn't export a proper cpu clock.
Drop this unused function.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
'bootrom_setup()' is only called via 'postcore_initcall'.
It can be marked as __init to save a few bytes of memory.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Originally the match arms are ordered by model release date, however
the LOONGSON_64R cores are even more reduced capability-wise. So put
them at top of the switch block.
Suggested-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The point is to allow userspace to probe for CPUCFG without possibly
triggering invalid instructions. In addition to that, future Loongson
feature bits could all be stuffed into CPUCFG bit fields (or "leaves"
in x86-speak) if Loongson does not make mistakes, so ELF HWCAP bits are
conserved.
Userspace can determine native CPUCFG availability by checking the LCSRP
(Loongson CSR Present) bit in CPUCFG output after seeing CPUCFG bit in
HWCAP. Native CPUCFG always sets the LCSRP bit, as CPUCFG is part of the
Loongson CSR ASE, while the emulation intentionally leaves this bit
clear.
The other existing Loongson-specific HWCAP bits are, to my best
knowledge, unused, as
(1) they are fairly recent additions,
(2) Loongson never back-ported the patch into their kernel fork, and
(3) Loongson's existing installed base rarely upgrade, if ever;
However, they are still considered userspace ABI, hence unfortunately
unremovable. But hopefully at least we could stop adding new Loongson
HWCAP bits in the future.
Cc: Paul Burton <paulburton@kernel.org>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Huacai Chen <chenhc@lemote.com>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Previously it was thought that all future Loongson cores would come with
native CPUCFG. From new information shared by Huacai this is definitely
not true (maybe some future 2K cores, for example), so collisions at
PRID_REV level are inevitable. The CPU model matching needs to take
PRID_IMP into consideration.
The emulation logic needs to be disabled for those future cores as well,
as we cannot possibly encode their non-discoverable features right now.
Reported-by: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
PTR_STR is redefined when CONFIG_TEST_PRINTF is set. This causes the
following build warning:
CC lib/test_printf.o
lib/test_printf.c:214:0: warning: "PTR_STR" redefined
#define PTR_STR "ffff0123456789ab"
^
In file included from ./arch/mips/include/asm/dsemul.h:11:0,
from ./arch/mips/include/asm/processor.h:22,
from ./arch/mips/include/asm/thread_info.h:16,
from ./include/linux/thread_info.h:38,
from ./include/asm-generic/preempt.h:5,
from ./arch/mips/include/generated/asm/preempt.h:1,
from ./include/linux/preempt.h:78,
from ./include/linux/spinlock.h:51,
from ./include/linux/seqlock.h:36,
from ./include/linux/time.h:6,
from ./include/linux/stat.h:19,
from ./include/linux/module.h:13,
from lib/test_printf.c:10:
./arch/mips/include/asm/inst.h:20:0: note: this is the location of the previous definition
#define PTR_STR ".dword"
^
Instead of renaming PTR_STR we move the unaligned macros to a new file,
which is only included inside MIPS code. This way we can safely include
asm.h and can use STR(PTR) again.
Fixes: e701656ec4 ("MIPS: inst.h: Stop including asm.h to avoid various build failures")
Cc: Maciej W. Rozycki" <macro@linux-mips.org>
Reported-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Co-developed-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
After commit 6423e59a64 ("MIPS: Loongson64: Switch to generic PCI
driver"), arch/mips/loongson64/pci.c is not used any more, remove it.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
PCI_IOBASE is used to create VM maps for PCI I/O ports, it is
required by generic PCI drivers to make memory mapped I/O range
work.
To deal with legacy drivers that have fixed I/O ports range we
reserved 0x10000 in PCI_IOBASE, should be enough for i8259 i8042
stuff.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
CPU_LOONGSON2EF need software to maintain cache consistency,
so modify the 'cpu_needs_post_dma_flush' function to return true
when the cpu type is CPU_LOONGSON2EF.
Cc: stable@vger.kernel.org
Signed-off-by: Lichao Liu <liulichao@loongson.cn>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
If CONFIG_MIPS_MALTA is not set but CONFIG_LEGACY_BOARD_SEAD3 is set,
the subdir arch/mips/boot/dts/mti will not be built, so the sead3.dts
which depends on CONFIG_LEGACY_BOARD_SEAD3 in this subdir is also not
built, and then there exists the following build error, fix it.
LD .tmp_vmlinux.kallsyms1
arch/mips/generic/board-sead3.o:(.mips.machines.init+0x4): undefined reference to `__dtb_sead3_begin'
Makefile:1106: recipe for target 'vmlinux' failed
make: *** [vmlinux] Error 1
Additionally, add CONFIG_FIT_IMAGE_FDT_BOSTON check for subdir img to
fix the following build error when CONFIG_MACH_PISTACHIO is not set but
CONFIG_FIT_IMAGE_FDT_BOSTON is set.
FATAL ERROR: Couldn't open "boot/dts/img/boston.dtb": No such file or directory
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 41528ba6af ("MIPS: DTS: Only build subdir of current platform")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Loongson64 load kernel at 0x82000000 and allocate exception vectors
by ebase. So we don't need to reserve space for exception vectors
at head of kernel.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Register "a1" is unsaved in this function,
when CONFIG_TRACE_IRQFLAGS is enabled,
the TRACE_IRQS_OFF macro will call trace_hardirqs_off(),
and this may change register "a1".
The changed register "a1" as argument will be send
to do_fpe() and do_msa_fpe().
Signed-off-by: YuanJunQing <yuanjunqing66@163.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
If original PTE has _PAGE_ACCESSED bit set, and new pte has no
_PAGE_NO_READ bit set, we can add _PAGE_SILENT_READ bit to enable
page valid bit.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Here add pte_sw_mkyoung function to make page readable on MIPS
platform during page fault handling. This patch improves page
fault latency about 10% on my MIPS machine with lmbench
lat_pagefault case.
It is noop function on other arches, there is no negative
influence on those architectures.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
If two threads concurrently fault at the same page, the thread that
won the race updates the PTE and its local TLB. For now, the other
thread gives up, simply does nothing, and continues.
It could happen that this second thread triggers another fault, whereby
it only updates its local TLB while handling the fault. Instead of
triggering another fault, let's directly update the local TLB of the
second thread. Function update_mmu_tlb is used here to update local
TLB on the second thread, and it is defined as empty on other arches.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
It is not necessary to flush tlb page on all CPUs if suitable PTE
entry exists already during page fault handling, just updating
TLB is fine.
Here redefine flush_tlb_fix_spurious_fault as empty on MIPS system.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Having a generic board option makes it possible to create a kernel that
will run on various Ingenic SoCs, as long as the right devicetree is
provided.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add support for the GCW Zero prototype. The only (?) difference is that
it only has 256 MiB of RAM, compared to the 512 MiB of RAM of the retail
device.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add memory info of the GCW Zero in its devicetree. The bootloader
generally provides this information, but since it is fixed to 512 MiB,
it doesn't hurt to have it in devicetree. It allows the kernel to boot
without any parameter passed as argument.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
We can now enable generic PCI driver in Kconfig, and remove legacy
PCI driver code.
Radeon vbios quirk is moved to the platform folder to fit the
new structure.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add PCI Host controller node for Loongson64 with RS780E PCH dts.
Note that PCI interrupts are probed via legacy way, as different
machine have different interrupt arrangement, we can't cover all
of them in dt.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The BCM6358 SoC has only 38 available GPIOs. Fix it.
Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
There is a file descriptor resource leak in elf-entry.c, fix this
by adding fclose() before return and die.
Signed-off-by: Kaige Li <likaige@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Fix the ordering of the macros in arch/mips/mach-ip30/war.h to match
those in arch/mips/mach-ip27/war.h.
Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
CPUCFG is the instruction for querying processor characteristics on
newer Loongson processors, much like CPUID of x86. Since the instruction
is supposedly designed to provide a unified way to do feature detection
(without having to, for example, parse /proc/cpuinfo which is too
heavyweight), it is important to provide compatibility for older cores
without native support. Fortunately, most of the fields can be
synthesized without changes to semantics. Performance is not really big
a concern, because feature detection logic is not expected to be
invoked very often in typical userland applications.
The instruction can't be emulated on LOONGSON_2EF cores, according to
FlyGoat's experiments. Because the LWC2 opcode is assigned to other
valid instructions on 2E and 2F, no RI exception is raised for us to
intercept. So compatibility is only extended back furthest to
Loongson-3A1000. Loongson-2K is covered too, as it is basically a remix
of various blocks from the 3A/3B models from a kernel perspective.
This is lightly based on Loongson's work on their Linux 3.10 fork, for
being the authority on the right feature flags to fill in, where things
aren't otherwise discoverable.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
CP0.Config6 is a Vendor-defined register whose bits definitions are
different from one to another. Recently, Xuerui's Loongson-3 patch and
Serge's P5600 patch make the definitions inconsistency and unclear.
To make life easy, this patch tidy the definition up:
1, Add a _MTI_ infix for proAptiv/P5600 feature bits;
2, Add a _LOONGSON_ infix for Loongson-3 feature bits;
3, Add bit6/bit7 definition for Loongson-3 which will be used later.
All existing users of these macros are updated.
Cc: WANG Xuerui <git@xen0n.name>
Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add config check in Makefile to only build the subdir of current platform.
E.g. without this patch:
AR arch/mips/built-in.a
AR arch/mips/boot/dts/brcm/built-in.a
AR arch/mips/boot/dts/cavium-octeon/built-in.a
AR arch/mips/boot/dts/img/built-in.a
AR arch/mips/boot/dts/ingenic/built-in.a
AR arch/mips/boot/dts/lantiq/built-in.a
DTC arch/mips/boot/dts/loongson/loongson3_4core_rs780e.dtb
DTB arch/mips/boot/dts/loongson/loongson3_4core_rs780e.dtb.S
AS arch/mips/boot/dts/loongson/loongson3_4core_rs780e.dtb.o
DTC arch/mips/boot/dts/loongson/loongson3_8core_rs780e.dtb
DTB arch/mips/boot/dts/loongson/loongson3_8core_rs780e.dtb.S
AS arch/mips/boot/dts/loongson/loongson3_8core_rs780e.dtb.o
AR arch/mips/boot/dts/loongson/built-in.a
AR arch/mips/boot/dts/mscc/built-in.a
AR arch/mips/boot/dts/mti/built-in.a
AR arch/mips/boot/dts/netlogic/built-in.a
AR arch/mips/boot/dts/ni/built-in.a
AR arch/mips/boot/dts/pic32/built-in.a
AR arch/mips/boot/dts/qca/built-in.a
AR arch/mips/boot/dts/ralink/built-in.a
AR arch/mips/boot/dts/xilfpga/built-in.a
AR arch/mips/boot/dts/built-in.a
With this patch:
AR arch/mips/built-in.a
DTC arch/mips/boot/dts/loongson/loongson3_4core_rs780e.dtb
DTB arch/mips/boot/dts/loongson/loongson3_4core_rs780e.dtb.S
AS arch/mips/boot/dts/loongson/loongson3_4core_rs780e.dtb.o
DTC arch/mips/boot/dts/loongson/loongson3_8core_rs780e.dtb
DTB arch/mips/boot/dts/loongson/loongson3_8core_rs780e.dtb.S
AS arch/mips/boot/dts/loongson/loongson3_8core_rs780e.dtb.o
AR arch/mips/boot/dts/loongson/built-in.a
AR arch/mips/boot/dts/built-in.a
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The exception handler subroutines are declared as a single char, but
when copied to the required addresses the copy length is 0x80.
When range checks are enabled for memcpy() this results in a build
failure, with error messages such as:
In file included from arch/mips/mti-malta/malta-init.c:15:
In function 'memcpy',
inlined from 'mips_nmi_setup' at arch/mips/mti-malta/malta-init.c:98:2:
include/linux/string.h:376:4: error: call to '__read_overflow2' declared with attribute error: detected read beyond size of object passed as 2nd parameter
376 | __read_overflow2();
| ^~~~~~~~~~~~~~~~~~
Change the declarations to use type char[].
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: YunQiang Su <syq@debian.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Due to being embedded into the CPU cores MIPS count/compare timer
frequency is changed together with the CPU clocks alteration.
In case if frequency really changes the kernel clockevent framework
must be notified, otherwise the kernel timers won't work correctly.
Fix this by calling clockevents_update_freq() for each r4k clockevent
handlers registered per available CPUs.
Traditionally MIPS r4k-clock are clocked with CPU frequency divided by 2.
But this isn't true for some of the platforms. Due to this we have to save
the basic CPU frequency, so then use it to scale the initial timer
frequency (mips_hpt_frequency) and pass the updated value further to the
clockevent framework.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Commit 07d69579e7 ("MIPS: Don't register r4k sched clock when CPUFREQ
enabled") disabled the r4k-clock usage for scheduler ticks counting due
to the scheduler being non-tolerant for unstable clocks sources. For the
same reason the clock should be used in the system clocksource framework
with care. As soon as CPU frequency changes the clocksource framework
should be notified about this by marking the R4K timer being unstable
(which it really is, since the ticks rate has been changed synchronously
with the CPU frequency).
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Loops-per-jiffies is a special number which represents a number of
noop-loop cycles per CPU-scheduler quantum - jiffies. As you
understand aside from CPU-specific implementation it depends on
the CPU frequency. So when a platform has the CPU frequency fixed,
we have no problem and the current udelay interface will work
just fine. But as soon as CPU-freq driver is enabled and the cores
frequency changes, we'll end up with distorted udelay's. In order
to fix this we have to accordinly adjust the per-CPU udelay_val
(the same as the global loops_per_jiffy) number. This can be done
in the CPU-freq transition event handler. We subscribe to that event
in the MIPS arch time-inititalization method.
Co-developed-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
On some platforms IO-memory might require to use a proper load/store
instructions (like Baikal-T1 IO-memory). To fix the cps-vec UART debug
printout let's add the CONFIG_CPS_NS16550_WIDTH config to determine which
instructions lb/sb, lh/sh or lw/sw are required for MMIO operations.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
There are bit fields which persist in the MIPS CONFIG and CONFIG6
registers, but haven't been described in the generic mipsregs.h
header so far. In particular, the generic CONFIG bitfields are
BE - endian mode, BM - burst mode, SB - SimpleBE, OCP interface mode
indicator, UDI - user-defined "CorExtend" instructions, DSP - data
scratch pad RAM present, ISP - instruction scratch pad RAM present,
etc. The core-specific CONFIG6 bitfields are JRCD - jump register
cache prediction disable, R6 - MIPSr6 extensions enable, IFUPerfCtl -
IFU performance control, SPCD - sleep state performance counter, DLSB -
disable load/store bonding. A new exception code reported in the
ExcCode field of the Cause register: 30 - Parity/ECC error exception
happened on either fetch, load or cache refill. Lets add them to the
mipsregs.h header to be used in future platform code, which have them
utilized.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
CP0 config register may indicate whether write-through merging
is allowed. Currently there are two types of the merging available:
SysAD Valid and Full modes. Whether each of them are supported by
the core is implementation dependent. Moreover whether the ability
to change the mode also depends on the chip family instance. Taking
into account all of this we created a dedicated mm_config() method
to detect and enable merging if it's supported. It is called for
MIPS-type processors at CPU-probe stage and attempts to detect whether
the write merging is available. If it's known to be supported and
switchable, then switch on the full mode. Otherwise just perform the
CP0.Config.MM field analysis.
In addition there are platforms like InterAptiv/ProAptiv, which do have
the MM bit field set by default, but having write-through cacheing
unsupported makes write-merging also unsupported. In this case we just
ignore the MM field value.
Co-developed-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Commit 1aeba347b3 ("MIPS: Hardcode cpu_has_mips* where target ISA
allows") updated the cpu_has_mips* macro to be replaced with a constant
expression where it's possible. By mistake it wasn't done correctly
for cpu_has_mips64r1/cpu_has_mips64r2 macro. They are defined to
be replaced with conditional expression __isa_range_or_flag(), which
means either ISA revision being within the range or the corresponding
CPU options flag was set at the probe stage or both being true at the
same time. But the ISA level value doesn't indicate whether the ISA is
MIPS32 or MIPS64. Due to this if we select MIPS32r1 - MIPS32r5
architectures the __isa_range() macro will activate the
cpu_has_mips64rX flags, which is incorrect. In order to fix the
problem we make sure the 64bits CPU support is enabled by means of
checking the flag cpu_has_64bits aside with proper ISA range and specific
Revision flag being set.
Fixes: 1aeba347b3 ("MIPS: Hardcode cpu_has_mips* where target ISA allows")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This is a MIPS32 Release 5 based IP core with XPA, EVA, dual/quad issue
exec pipes, MMU with two-levels TLB, UCA, MSA, MDU core level features
and system level features like up to six P5600 calculation cores, CM2
with L2 cache, IOCU/IOMMU (though might be unused depending on the
system-specific IP core configuration), GIC, CPC, virtualisation module,
eJTAG and PDtrace.
As being MIPS32 Release 5 based core it provides all the features
available by the CPU_MIPS32_R5 config, while adding a few more like
UCA attribute support, availability of CPU-freq (by means of L2/CM
clock ratio setting), EI/VI GIC modes detection at runtime.
In addition to this if P5600 architecture is enabled modern GNU GCC
provides a specific tuning for P5600 processors with respect to the
classic MIPS32 Release 5. First of all branch-likely avoidance is
activated only when the code is compiled with the speed optimization
(avoidance is always enabled for the pure MIPS32 Release 5
architecture). Secondly the madd/msub avoidance is enabled since
madd/msub utilization isn't profitable due to overhead of getting the
result out of the HI/LO registers. Multiply-accumulate instructions are
activated and utilized together with the necessary code reorder when
multiply-add/multiply-subtract statements are met. Finally load/store
bonding is activated by default. All of these optimizations may make
the code relatively faster than if just MIP32 release 5 architecture
was requested.
Co-developed-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
There are five MIPS32/64 architecture releases currently available:
from 1 to 6 except fourth one, which was intentionally skipped.
Three of them can be called as major: 1st, 2nd and 6th, that not only
have some system level alterations, but also introduced significant
core/ISA level updates. The rest of the MIPS architecture releases are
minor.
Even though they don't have as much ISA/system/core level changes
as the major ones with respect to the previous releases, they still
provide a set of updates (I'd say they were intended to be the
intermediate releases before a major one) that might be useful for the
kernel and user-level code, when activated by the kernel or compiler.
In particular the following features were introduced or ended up being
available at/after MIPS32/64 Release 5 architecture:
+ the last release of the misaligned memory access instructions,
+ virtualisation - VZ ASE - is optional component of the arch,
+ SIMD - MSA ASE - is optional component of the arch,
+ DSP ASE is optional component of the arch,
+ CP0.Status.FR=1 for CP1.FIR.F64=1 (pure 64-bit FPU general registers)
must be available if FPU is implemented,
+ CP1.FIR.Has2008 support is required so CP1.FCSR.{ABS2008,NAN2008} bits
are available.
+ UFR/UNFR aliases to access CP0.Status.FR from user-space by means of
ctc1/cfc1 instructions (enabled by CP0.Config5.UFR),
+ CP0.COnfig5.LLB=1 and eretnc instruction are implemented to without
accidentally clearing LL-bit when returning from an interrupt,
exception, or error trap,
+ XPA feature together with extended versions of CPx registers is
introduced, which needs to have mfhc0/mthc0 instructions available.
So due to these changes GNU GCC provides an extended instructions set
support for MIPS32/64 Release 5 by default like eretnc/mfhc0/mthc0. Even
though the architecture alteration isn't that big, it still worth to be
taken into account by the kernel software. Finally we can't deny that
some optimization/limitations might be found in future and implemented
on some level in kernel or compiler. In this case having even
intermediate MIPS architecture releases support would be more than
useful.
So the most of the changes provided by this commit can be split into
either compile- or runtime configs related. The compile-time related
changes are caused by adding the new CONFIG_CPU_MIPS32_R5/CONFIG_CPU_MIPSR5
configs and concern the code activating MIPSR2 or MIPSR6 already
implemented features (like eretnc/LLbit, mthc0/mfhc0). In addition
CPU_HAS_MSA can be now freely enabled for MIPS32/64 release 5 based
platforms as this is done for CPU_MIPS32_R6 CPUs. The runtime changes
concerns the features which are handled with respect to the MIPS ISA
revision detected at run-time by means of CP0.Config.{AT,AR} bits. Alas
these fields can be used to detect either r1 or r2 or r6 releases.
But since we know which CPUs in fact support the R5 arch, we can manually
set MIPS_CPU_ISA_M32R5/MIPS_CPU_ISA_M64R5 bit of c->isa_level and then
use cpu_has_mips32r5/cpu_has_mips64r5 where it's appropriate.
Since XPA/EVA provide too complex alterationss and to have them used with
MIPS32 Release 2 charged kernels (for compatibility with current platform
configs) they are left to be setup as a separate kernel configs.
Co-developed-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Indeed according to the MIPS32 Privileged Resource Architecgture the MAAR
pair register address field either takes [12:31] bits for non-XPA systems
and [12:55] otherwise. In any case the current address mask is just
wrong for 64-bit and 32-bits XPA chips. So lets extend it to 59-bits
of physical address value. This shall cover the 64-bits architecture and
systems with XPA enabled, and won't cause any problem for non-XPA 32-bit
systems, since address values exceeding the architecture specific MAAR
mask will be just truncated with setting zeros in the unsupported upper
bits.
Co-developed-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
After commit f5ff0a2802 ("[MIPS] Use generic NTP code for all MIPS
platforms"), TICK_SIZE is not used in ip27-timer.c for many years,
remove it.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add missing include which adds the prototype to plat_time_init().
Fixes: f932449c11 ("MIPS: ingenic: Drop obsolete code, merge the rest in setup.c")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
After commit 0ce5ebd24d ("mfd: ioc3: Add driver for SGI IOC3 chip"),
the related includes and comment about ioc3 are not used any more in
ip27-timer.c, remove them.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When XPA mode is enabled the normally 32-bits MAAR pair registers
are extended to be of 64-bits width as in pure 64-bits MIPS
architecture. In this case the MAAR registers can enable the
speculative loads/stores for addresses of up to 39-bits width.
But in this case the process of the MAAR initialization changes a bit.
The upper 32-bits of the registers are supposed to be accessed by mean
of the dedicated instructions mfhc0/mthc0 and there is a CP0.MAAR.VH
bit which should be set together with CP0.MAAR.VL as indication
of the boundary validity. All of these peculiarities were taken into
account in this commit so the speculative loads/stores would work
when XPA mode is enabled.
Co-developed-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-pm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The parameter "cmdline_p" is useless in bootcmdline_init()，remove it.
Signed-off-by: Zhi Li <lizhi01@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
After commit 9d0aaf98dc ("MIPS: SGI-IP27: Move all shared IP27
declarations to ip27-common.h"), ip27-common.h is included more
than once in ip27-timer.c, remove it.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Remove an old macro that no longer exists anywhere else in the tree
that snuck in when IP30 support was added
Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
After commit 87fcfa7b7f ("MIPS: Loongson64: Add generic dts"),
there already exists the node and property of Loongson CPU UART0
in loongson3-package.dtsi:
cpu_uart0: serial@1fe001e0 {
compatible = "ns16550a";
reg = <0 0x1fe001e0 0x8>;
clock-frequency = <33000000>;
interrupt-parent = <&liointc>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
no-loopback-test;
};
In order to support for serial console on the Loongson platform,
add CONFIG_SERIAL_OF_PLATFORM=y to loongson3_defconfig.
With this patch, we can see the following boot messages:
[ 1.877745] printk: console [ttyS0] disabled
[ 1.881979] 1fe001e0.serial: ttyS0 at MMIO 0x1fe001e0 (irq = 16, base_baud = 2062500) is a 16550A
[ 1.890838] printk: console [ttyS0] enabled
And also, we can login normally from the serial console.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
User space checkpoint and restart tool (CRIU) needs the page's change
to be soft tracked. This allows to do a pre checkpoint and then dump
only touched pages.
Signed-off-by: Guoyun Sun <sunguoyun@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
These are exposed to userland alternatively via the new CPUCFG
instruction on Loongson-3A R4 and above. Add definitions for readback
on older cores.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add the constants for easier and maintainable composition of CPUCFG
values.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Fix some symbol names to align with Loongson's User Manual wording. Also
correct the comment in csr_readq() suggesting the wrong instruction in
use.
Fixes: 6a6f9b7daf ("MIPS: Loongson: Add CFUCFG&CSR support")
Signed-off-by: WANG Xuerui <git@xen0n.name>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When CONFIG_HAVE_STD_PC_SERIAL_PORT is set, there exists build errors
of 8250-platform.c due to linux/module.h is not included.
CONFIG_HAVE_STD_PC_SERIAL_PORT is not used in arch/mips for many years,
8250-platform.c is also not built and used, so it is not necessary to
fix the build errors, just remove the not used file 8250-platform.c and
the related code in Kconfig and Makefile.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When ATI Radeon GPU driver has been compiled directly into the kernel
instead of as a module, we should make sure the firmware for the model
(check available ones in /lib/firmware/radeon) is built-in to the kernel
as well, otherwise there exists the following fatal error during GPU init,
change CONFIG_DRM_RADEON=y to CONFIG_DRM_RADEON=m to fix it.
[ 1.900997] [drm] Loading RS780 Microcode
[ 1.905077] radeon 0000:01:05.0: Direct firmware load for radeon/RS780_pfp.bin failed with error -2
[ 1.914140] r600_cp: Failed to load firmware "radeon/RS780_pfp.bin"
[ 1.920405] [drm:r600_init] *ERROR* Failed to load firmware!
[ 1.926069] radeon 0000:01:05.0: Fatal error during GPU init
[ 1.931729] [drm] radeon: finishing device.
Fixes: 024e6a8b5b ("MIPS: Loongson: Add a Loongson-3 default config file")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Two new stats for exposing halt-polling cpu usage:
halt_poll_success_ns
halt_poll_fail_ns
Thus sum of these 2 stats is the total cpu time spent polling. "success"
means the VCPU polled until a virtual interrupt was delivered. "fail"
means the VCPU had to schedule out (either because the maximum poll time
was reached or it needed to yield the CPU).
To avoid touching every arch's kvm_vcpu_stat struct, only update and
export halt-polling cpu usage stats if we're on x86.
Exporting cpu usage as a u64 and in nanoseconds means we will overflow at
~500 years, which seems reasonably large.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Jon Cargille <jcargill@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20200508182240.68440-1-jcargill@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With earlier commits, the API no longer discards the const-ness of the
sysrq_key_op. As such we can add the notation.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: linux-kernel@vger.kernel.org
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://lore.kernel.org/r/20200513214351.2138580-5-emil.l.velikov@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
schema violation was detected by the dtbs_check
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Fit led nodes to the latest naming schema.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The attached patch wraps several of the macros in IP27's spaces.h
header file with the _AC() macro. This matches most of the other
spaces.h files in the MIPS tree.
Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
With the change of platform file inclusion object were included via
platform-y and core-y. Remove the core-y part to fix it.
Fixes: 26bff9eb49 ("MIPS: Only include the platformfile needed")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Changing inclusion of Platform files, broke VR41xx platforms. Add Makefile
to vr41xx directory and traverse subdirs from it.
Fixes: 26bff9eb49 ("MIPS: Only include the platformfile needed")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
POSIX defines faccessat() as having a fourth "flags" argument, while the
linux syscall doesn't have it. Glibc tries to emulate AT_EACCESS and
AT_SYMLINK_NOFOLLOW, but AT_EACCESS emulation is broken.
Add a new faccessat(2) syscall with the added flags argument and implement
both flags.
The value of AT_EACCESS is defined in glibc headers to be the same as
AT_REMOVEDIR. Use this value for the kernel interface as well, together
with the explanatory comment.
Also add AT_EMPTY_PATH support, which is not documented by POSIX, but can
be useful and is trivial to implement.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fix the following coccicheck warning:
arch/mips/kvm/tlb.c:472:2-3: Unneeded semicolon
arch/mips/kvm/tlb.c:489:2-3: Unneeded semicolon
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Fix the following coccicheck warning:
arch/mips/kvm/mips.c:82:1-28: WARNING: Assignment of 0/1 to bool
variable
arch/mips/kvm/mips.c:88:1-28: WARNING: Assignment of 0/1 to bool
variable
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This is an add-on patch to the main SoC Sparx5 series
(Message-ID: <20200513125532.24585-1-lars.povlsen@microchip.com>).
This changes the miim pinctrl function name from "miim1" to "miim" due
to refactoring in the driver, obsoleting the instance number.
The change in the driver was to better fit new platforms, as the
instance number is redundant information. Specifically, support for
the Microchip Sparx5 SoC is being submitted, where this change became
necessary.
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The use of any sort of waitqueue (simple or regular) for
wait/waking vcpus has always been an overkill and semantically
wrong. Because this is per-vcpu (which is blocked) there is
only ever a single waiting vcpu, thus no need for any sort of
queue.
As such, make use of the rcuwait primitive, with the following
considerations:
- rcuwait already provides the proper barriers that serialize
concurrent waiter and waker.
- Task wakeup is done in rcu read critical region, with a
stable task pointer.
- Because there is no concurrency among waiters, we need
not worry about rcuwait_wait_event() calls corrupting
the wait->task. As a consequence, this saves the locking
done in swait when modifying the queue. This also applies
to per-vcore wait for powerpc kvm-hv.
The x86 tscdeadline_latency test mentioned in 8577370fb0
("KVM: Use simple waitqueue for vcpu->wq") shows that, on avg,
latency is reduced by around 15-20% with this change.
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: kvmarm@lists.cs.columbia.edu
Cc: linux-mips@vger.kernel.org
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Message-Id: <20200424054837.5138-6-dave@stgolabs.net>
[Avoid extra logic changes. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 26bff9eb49 ("MIPS: Only include the platformfile needed")
moves platform-(CONFIG_XYZ) from arch/mips/xyz/Platform to arch/mips/
Kbuild.platforms. This change causes an error when "make clean":
./scripts/Makefile.clean:15: arch/mips/vr41xx/Makefile: No such file or directory
make[3]: *** No rule to make target `arch/mips/vr41xx/Makefile'. Stop.
make[2]: *** [arch/mips/vr41xx] Error 2
make[1]: *** [_clean_arch/mips] Error 2
make: *** [sub-make] Error 2
Clean-files are defined in arch/mips/Kbuild:
obj- := $(platform-)
Due to the movement of platform-(CONFIG_XYZ), "make clean" will enter
arch/mips/vr41xx/ whether CONFIG_MACH_VR41XX is defined or not. Because
there is no Makefile in arch/mips/vr41xx/, "make clean" fails. I don't
know what is the best way to fix it, but it seems like we can avoid this
error by changing the obj- definition:
obj- := $(platform-y)
Fixes: 26bff9eb49 ("MIPS: Only include the platformfile needed")
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Commit 26bff9eb49 ("MIPS: Only include the platform file needed")
misspelled "txx9" to "tx99", so fix it.
Fixes: 26bff9eb49 ("MIPS: Only include the platform file needed")
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This include isn't used by this file, so just remove it.
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Paul Burton <paulburton@kernel.org>
Cc: <linux-mips@vger.kernel.org>
Cc: <chenhc@lemote.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20200409064416.83340-10-sboyd@kernel.org
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Instead of including all Platform files, we simply include the
needed one and avoid clashes with makefile variables.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Currently we have architecture-specific fd_inb() and fd_outb() functions
or macros, taking just a port which is in fact made of a base address and
a register. The base address is FDC-specific and derived from the local or
global "fdc" variable through the FD_IOPORT macro used in the base address
calculation.
This change splits this by explicitly passing the FDC's base address and
the register separately to fd_outb() and fd_inb(). It affects the
following archs:
- x86, alpha, mips, powerpc, parisc, arm, m68k:
simple remap of port -> base+reg
- sparc32: use of reg only, since the base address was already masked
out and the FDC controller is known from a static struct.
- sparc64: like x86 for PCI, like sparc32 for 82077
Some archs use inline functions and others macros. This was not
unified in order to minimize the number of changes to review. For the
same reason checkpatch still spews a few warnings about things that
were already there before.
The parisc still uses hard-coded register values and could be cleaned up
by taking the register definitions.
The sparc per-controller inb/outb functions could further be refined
to explicitly take an FDC register instead of a port in argument but it
was not needed yet and may be cleaned later.
Link: https://lore.kernel.org/r/20200331094054.24441-2-w@1wt.eu
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Ian Molton <spyro@f2s.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Helge Deller <deller@gmx.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: x86@kernel.org
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Currently, when linking with ld.lld, this warning pops up:
arch/mips/vdso/Makefile:70: MIPS VDSO requires binutils >= 2.25
CONFIG_LD_VERSION is set with scripts/ld-version.sh, which is specific
to GNU ld. It returns 0 for ld.lld so CONFIG_MIPS_LD_CAN_LINK_VDSO does
not set.
ld.lld has a completely different versioning scheme (as it follows
LLVM's versioning) and it does not have the issue mentioned in the
comment block so it should be allowed to link the VDSO.
With this patch, the VDSO successfully links and shows P_MIPS_PC32 in
vgettimeofday.o.
$ llvm-objdump -Dr arch/mips/vdso/vgettimeofday.o | grep R_MIPS_PC32
00000024: R_MIPS_PC32 _start
000000b0: R_MIPS_PC32 _start
000002bc: R_MIPS_PC32 _start
0000036c: R_MIPS_PC32 _start
00000468: R_MIPS_PC32 _start
Reported-by: Dmitry Golovin <dima@golovin.in>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/785
Link: e364e2e9ce
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Currently, the VDSO is being linked through $(CC). This does not match
how the rest of the kernel links objects, which is through the $(LD)
variable.
When clang is built in a default configuration, it first attempts to use
the target triple's default linker then the system's default linker,
unless told otherwise through -fuse-ld=... We do not use -fuse-ld=
because it can be brittle and we have support for invoking $(LD)
directly. See commit fe00e50b2d ("ARM: 8858/1: vdso: use $(LD)
instead of $(CC) to link VDSO") and commit 691efbedc6 ("arm64: vdso:
use $(LD) instead of $(CC) to link VDSO") for examples of doing this in
the VDSO.
Do the same thing here. Replace the custom linking logic with $(cmd_ld)
and ldflags-y so that $(LD) is respected. We need to explicitly add two
flags to the linker that were implicitly passed by the compiler:
-G 0 (which comes from ccflags-vdso) and --eh-frame-hdr.
Before this patch (generated by adding '-v' to VDSO_LDFLAGS):
<gcc_prefix>/libexec/gcc/mips64-linux/9.3.0/collect2 \
-plugin <gcc_prefix>/libexec/gcc/mips64-linux/9.3.0/liblto_plugin.so \
-plugin-opt=<gcc_prefix>/libexec/gcc/mips64-linux/9.3.0/lto-wrapper \
-plugin-opt=-fresolution=/tmp/ccGEi5Ka.res \
--eh-frame-hdr \
-G 0 \
-EB \
-mips64r2 \
-shared \
-melf64btsmip \
-o arch/mips/vdso/vdso.so.dbg.raw \
-L<gcc_prefix>/lib/gcc/mips64-linux/9.3.0/64 \
-L<gcc_prefix>/lib/gcc/mips64-linux/9.3.0 \
-L<gcc_prefix>/lib/gcc/mips64-linux/9.3.0/../../../../mips64-linux/lib \
-Bsymbolic \
--no-undefined \
-soname=linux-vdso.so.1 \
-EB \
--hash-style=sysv \
--build-id \
-T arch/mips/vdso/vdso.lds \
arch/mips/vdso/elf.o \
arch/mips/vdso/vgettimeofday.o \
arch/mips/vdso/sigreturn.o
After this patch:
<gcc_prefix>/bin/mips64-linux-ld \
-m elf64btsmip \
-Bsymbolic \
--no-undefined \
-soname=linux-vdso.so.1 \
-EB \
-nostdlib \
-shared \
-G 0 \
--eh-frame-hdr \
--hash-style=sysv \
--build-id \
-T arch/mips/vdso/vdso.lds \
arch/mips/vdso/elf.o \
arch/mips/vdso/vgettimeofday.o
arch/mips/vdso/sigreturn.o \
-o arch/mips/vdso/vdso.so.dbg.raw
Note that we leave behind -mips64r2. Turns out that ld ignores it (see
get_emulation in ld/ldmain.c). This is true of current trunk and 2.23,
which is the minimum supported version for the kernel:
https://sourceware.org/git/?p=binutils-gdb.git;a=blob;f=ld/ldmain.c;hb=aa4209e7b679afd74a3860ce25659e71cc4847d5#l593https://sourceware.org/git/?p=binutils-gdb.git;a=blob;f=ld/ldmain.c;hb=a55e30b51bc6227d8d41f707654d0a5620978dcf#l641
Before this patch, LD=ld.lld did nothing:
$ llvm-readelf -p.comment arch/mips/vdso/vdso.so.dbg | sed 's/(.*//'
String dump of section '.comment':
[ 0] ClangBuiltLinux clang version 11.0.0
After this patch, it does:
$ llvm-readelf -p.comment arch/mips/vdso/vdso.so.dbg | sed 's/(.*//'
String dump of section '.comment':
[ 0] Linker: LLD 11.0.0
[ 62] ClangBuiltLinux clang version 11.0.0
Link: https://github.com/ClangBuiltLinux/linux/issues/785
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This was all done to work around a GCC bug that has been fixed after
4.2. The kernel requires GCC 4.6 or newer so remove all of these hacks
and just use the traditional flags.
$ mips64-linux-gcc --version | head -n1
mips64-linux-gcc (GCC) 4.6.3
$ mips64-linux-gcc -EB -dM -E -C -x c /dev/null | grep MIPSE
#define MIPSEB 1
#define __MIPSEB__ 1
#define _MIPSEB 1
#define __MIPSEB 1
$ mips64-linux-gcc -EL -dM -E -C -x c /dev/null | grep MIPSE
#define __MIPSEL__ 1
#define MIPSEL 1
#define _MIPSEL 1
#define __MIPSEL 1
This is necessary when converting the MIPS VDSO to use $(LD) instead of
$(CC) to link because the OUTPUT_FORMAT is defaulted to little endian
and only flips to big endian when '-EB' is set on the command line.
There is no issue currently because the compiler explicitly passes
'-EB' or '-EL' to the linker regardless of whether or not it was
provided by the user. Passing '-v' to VDSO_LDFLAGS shows:
<gcc_prefix>/libexec/gcc/mips64-linux/9.3.0/collect2 ... -EB ...
even though '-EB' is nowhere to be found in KBUILD_CFLAGS. The VDSO
Makefile already supports getting '-EB' or '-EL' from KBUILD_CFLAGS
through a filter directive but '-EB' or '-EL' is not always present.
If we do not do this, we will see the following error when compiling
for big endian:
$ make -j$(nproc) ARCH=mips CROSS_COMPILE=mips64-linux- \
64r2el_defconfig arch/mips/vdso/
...
mips64-linux-ld: arch/mips/vdso/elf.o: compiled for a big endian system
and target is little endian
mips64-linux-ld: arch/mips/vdso/elf.o: endianness incompatible with that
of the selected emulation
mips64-linux-ld: failed to merge target specific data of file
arch/mips/vdso/elf.o
...
Remove this legacy hack and just use '-EB' and '-EL' unconditionally.
Reported-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
After commit 9553d16fa6 ("init/kconfig: Add LD_VERSION Kconfig"), we
have access to GNU ld's version at configuration time. As a result, we
can make it clearer under what configuration circumstances the MIPS VDSO
needs to be disabled.
This is a prerequisite for getting rid of the MIPS VDSO binutils
warning and linking the VDSO when LD is ld.lld. Wrapping the call to
ld-ifversion with CONFIG_LD_IS_LLD does not work because the config
values are wiped away during 'make clean'.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
__flush_icache_user_range is not used in modular code, so unexport it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
In the current market, the most used bridge chip on the Loongson platform
are RS780E and LS7A, the RS780E bridge chip is already supported by the
mainline kernel.
If use the default implementation of __phys_to_dma() and __dma_to_phys()
in dma-direct.h when CONFIG_ARCH_HAS_PHYS_TO_DMA is not set, it works
well used with LS7A on the Loongson single-way and multi-way platform,
and also works well used with RS780E on the Loongson single-way platform,
but the DMA address will be wrong on the non-node0 used with RS780E on
the Loongson multi-way platform.
Just as the description in the code comment, the devices get node id from
40 bit of HyperTransport bus, so we extract 2 bit node id (bit 44~45) from
48 bit address space of Loongson CPU and embed it into HyperTransport bus
(bit 37-38), this operation can be done only at the software level used
with RS780E on the Loongson multi-way platform, because it has no hardware
function to translate address of node id, this is a hardware compatibility
problem.
Device
|
| DMA address
|
Host Bridge
|
| HT bus address (40 bit)
|
CPU
|
| physical address (48 bit)
|
RAM
The LS7A has dma_node_id_offset field in the DMA route config register,
the hardware can use the dma_node_id_offset to translate address of
node id automatically, so we can get correct address when just use the
dma_pfn_offset field in struct device.
For the above reasons, in order to maintain downward compatibility
to support the RS780E bridge chip, it is better to use the platform
dependent implementation of __phys_to_dma() and __dma_to_phys().
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Commit d339cd02b8 ("MIPS: Move unaligned load/store helpers to
inst.h") causes a lot of build failures because macros in asm.h conflict
with various subsystems. Some of these conflictions has been fixed (such
as LONG, PANIC and PRINT) by adjusting asm.h, but some of them is nearly
impossible to fix (such as PTR and END). The only reason of including
asm.h in inst.h is that we need the PTR macro which is used by unaligned
load/store helpers. So in this patch we define a new PTR_STR macro and
use it to replace STR(PTR), then we can stop including asm.h to avoid
various build failures.
Fixes: d339cd02b8 ("MIPS: Move unaligned load/store helpers to inst.h")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
<linux/cryptohash.h> sounds very generic and important, like it's the
header to include if you're doing cryptographic hashing in the kernel.
But actually it only includes the library implementation of the SHA-1
compression function (not even the full SHA-1). This should basically
never be used anymore; SHA-1 is no longer considered secure, and there
are much better ways to do cryptographic hashing in the kernel.
Most files that include this header don't actually need it. So in
preparation for removing it, remove all these unneeded includes of it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use ASM_ prefix to rename some macros (PANIC and PRINT), in order to
avoid build errors (all users are updated as well):
1, PANIC conflicts with drivers/scsi/smartpqi/smartpqi_init.c
2, PRINT conflicts with net/netfilter/nf_conntrack_h323_asn1.c and net/
mac80211/debugfs_sta.c
Fixes: d339cd02b8 ("MIPS: Move unaligned load/store helpers to inst.h")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
According to the MIPS32 InterAptiv software manual error codes 24 - 26
of CM2 indicate L2 ECC/parity error with switching to a corresponding
errors info fields. This patch provides these errors parsing code,
which handles the read/write uncorrectable and correctable ECC/parity
errors, and prints instruction causing the fault, RAM array type, cache
way/dword and syndrome associated with the faulty data.
Co-developed-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-pm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Commit 3885c2b463 ("MIPS: CM: Add support for reporting CM cache
errors") adds cm2_causes[] array with map of error type ID and
pointers to the short description string. There is a mistake in
the table, since according to MIPS32 manual CM2_ERROR_TYPE = {17,18}
correspond to INTVN_WR_ERR and INTVN_RD_ERR, while the table
claims they have {0x17,0x18} codes. This is obviously hex-dec
copy-paste bug. Moreover codes {0x18 - 0x1a} indicate L2 ECC errors.
Fixes: 3885c2b463 ("MIPS: CM: Add support for reporting CM cache errors")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-pm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The JZ4740 setup code is not a clock provider, and just needs to call
of_clk_init().
Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>.
Fixes: f932449c11 ("MIPS: ingenic: Drop obsolete code, merge the rest in setup.c")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
LLD failed to link vmlinux with 64bit load address for 32bit ELF
while bfd will strip 64bit address into 32bit silently.
To fix LLD build, we should truncate load address provided by platform
into 32bit for 32bit kernel.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/786
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=25784
Reviewed-by: Fangrui Song <maskray@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This code has been marked dead for more than 10 years. Seems no need to
keep it now.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This code has been marked dead since the beginning of the git history.
Seems no need to keep it now.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This code has been marked dead for more than 10 years. Seems no need to
keep it now.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
