Remove the requirement of a VDEC_SYS reg iospace for both MT8173 and
MT8183. To achieve that, rely on a vdecsys syscon to be passed through
the DT, and use it to directly read the VDEC_HW_ACTIVE bit during IRQ
handling to check whether the HW is active. Also update the VP8 stateful
decoder to use the syscon, if present, for writes to VDEC_SYS.
The old behavior is still present when reg-names aren't supplied, as
to keep backward compatibility.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: added vdecsys_regmap kerneldoc line provided by Nicolas]
The VDEC_HW_ACTIVE bit is located at offset 0, bit 4 of the VDECSYS
iospace. Only the mask was previously defined, with the address being
implicit. Explicitly define the address, and append a '_MASK' suffix to
the mask, to make accesses to this bit clearer.
This commit brings no functional change.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The binding expects the first register space to be VDEC_SYS. However
this register space is already assigned to a different node on both
MT8173 and MT8183: a clock-controller node called 'vdecsys' which is
also a syscon.
In order to resolve the overlapping address ranges, remove the VDEC_SYS
register space from the video decoder, and add a new property to hold
the phandle to the syscon, so that iospace can still be handled.
Also add reg-names to be able to tell that this new register schema is
used, so the driver can keep backward compatibility.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
On MT8183 it's not necessary to configure the parent for the clocks.
Remove the assigned-clocks and assigned-clock-parents from the required
list.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
MT8173 and MT8183 have different clocks, and consequently clock-names.
Relax the number of clocks and set clock-names based on compatible.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This is intended to print the error code but there is a typo so it
prints IS_ERR() instead of PTR_ERR().
Fixes: 77f3b023f452 ("media: mediatek: vcodec: Add debugfs interface to get debug information")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The list iterator "dbgfs_inst" is always non-NULL. This means that the
test for NULL inside the loop is unnecessary and it also means that the
test for NULL outside the loop will not work. If we do not find the item
on the list with the correct the ctx_id then it will free invalid memory
leading to a crash.
Fixes: cd403a6a0419 ("media: mediatek: vcodec: Add a debugfs file to get different useful information")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
the supported_instance_count determine the instance index range,
it shouldn't exceed the bits number of instance_mask,
otherwise the bitops of instance_mask may cross boundaries
Fixes: 9f599f351e ("media: amphion: add vpu core driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
assign value '-EINVAL' to ret, but the stored value is overwritten
before it can be used
Fixes: 9f599f351e ("media: amphion: add vpu core driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
using uninitialized value may introduce risk
Fixes: 9f599f351e ("media: amphion: add vpu core driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
null-checking of a pointor is suggested before dereferencing it
Fixes: 9f599f351e ("media: amphion: add vpu core driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
After testing it is possible for the hardware to decode H264
bistream with a height up to 2560.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Fixes: cd33c83044 ("media: rkvdec: Add the rkvdec driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
the firmware only support low latency mode for h264,
but firmware will notify an event to driver
when one frame is decoded,
if V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY_ENABLE is enabled,
and V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY is set to 0,
driver can display the decoded frame immediately.
Fixes: ffa331d9bf ("media: amphion: decoder implement display delay enable")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In mtk_jpeg_probe, &jpeg->job_timeout_work is bound with
mtk_jpeg_job_timeout_work. Then mtk_jpeg_dec_device_run
and mtk_jpeg_enc_device_run may be called to start the
work.
If we remove the module which will call mtk_jpeg_remove
to make cleanup, there may be a unfinished work. The
possible sequence is as follows, which will cause a
typical UAF bug.
Fix it by canceling the work before cleanup in the mtk_jpeg_remove
CPU0 CPU1
|mtk_jpeg_job_timeout_work
mtk_jpeg_remove |
v4l2_m2m_release |
kfree(m2m_dev); |
|
| v4l2_m2m_get_curr_priv
| m2m_dev->curr_ctx //use
Fixes: b2f0d2724b ("[media] vcodec: mediatek: Add Mediatek JPEG Decoder Driver")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Commit f100ce3bbd ("media: verisilicon: Fix crash when probing
encoder") removed vpu_fmt from hantro_try_fmt(), since it was
initialized from vpu_dst_fmt, which may not be initialized, when TRY_FMT
is called. It was replaced by fmt, which is found using the pixelformat.
For the encoder, this changed the fmt to contain the raw format instead
of the coded format. The format constraints as of fmt->frmsize are only
valid for the coded format and are 0 for the raw formats. Therefore, the
size of a encoder OUTPUT device is constrained to 0 and the
v4l2-compliance tests for G_FMT, TRY_FMT, and SET_FMT fail.
Bring back vpu_fmt to use the coded format on an encoder OUTPUT device,
but initialize it using the currently set pixelformat on dst_fmt, which
is the coded format on an encoder.
Fixes: f100ce3bbd ("media: verisilicon: Fix crash when probing encoder")
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Adhere to Linux kernel coding style. Removed redundant blank line.
Issue found by checkpatch.
Signed-off-by: Emma Christy <emma.t.christy@gmail.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The meson-vdec module loads firmware so add MODULE_FIRMWARE macros to
provide that information via modinfo.
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
convert numbers into meaningful names,
then it can improve the log readability
Fixes: 9f599f351e ("media: amphion: add vpu core driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
according to v4l2 stateful decoder document 4.5.1.3. State Machine,
the state should change from seek to initialization
if call VIDIOC_REQBUFS(OUTPUT, 0).
so reinit the vpu decoder if reqbufs output 0
Fixes: 6de8d628df ("media: amphion: add v4l2 m2m vpu decoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
It was completely unnecessary to use BUG in saa7164_s_frequency,
just return an error instead. This also solves a smatch error:
drivers/media/pci/saa7164/saa7164-encoder.c:388 saa7164_s_frequency() error: potentially dereferencing uninitialized 'tsport'.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
It was completely unnecessary to use BUG in buffer_prepare().
Just replace it with an error return. This also fixes a smatch warning:
drivers/media/pci/cx23885/cx23885-video.c:422 buffer_prepare() error: uninitialized symbol 'ret'.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This tells sparse that tegra_vip_driver is actually used,
and so avoids this warning:
drivers/staging/media/tegra-video/vip.c:280:31: warning: 'tegra_vip_driver' defined but not used [-Wunused-variable]
280 | static struct platform_driver tegra_vip_driver = {
| ^~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not make any sense.
This also fixes this !CONFIG_OF error:
drivers/staging/media/sunxi/sun6i-isp/sun6i_isp.c:529:34: warning: 'sun6i_isp_of_match' defined but not used [-Wunused-const-variable=]
529 | static const struct of_device_id sun6i_isp_of_match[] = {
| ^~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
BUG_ON is unnecessary here, and in addition it confuses smatch.
Replacing this with an error return help resolve this smatch
warning:
drivers/media/tuners/qt1010.c:350 qt1010_init() error: buffer overflow 'i2c_data' 34 <= 34
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Shijie has not been actively working on the driver,
his e-mail address is bouncing for quite awhile now.
remove him from the maintainer list here.
I do want to thank him for his work on the driver.
Signed-off-by: Zhou Peng <eagle.zhou@nxp.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The kernel already has a helper to print a hexdump of a small
buffer via pointer extension. Use that instead of open coded
variant.
In long term it helps to kill pr_cont() or at least narrow down
its use.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fix the following warning:
drivers/media/i2c/ds90ub913.c:488:9: warning: 'v' may be used uninitialized [-Wmaybe-uninitialized]
488 | ub913_write(priv, UB913_REG_GENERAL_CFG,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
489 | v | UB913_REG_GENERAL_CFG_CRC_ERR_RESET);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/media/i2c/ds90ub913.c:477:12: note: 'v' was declared here
477 | u8 v, v1, v2;
| ^
Fix the warning by initializing the variable to 0. Proper error handling
here would be somewhat pointless, as we are just printing register
values, and the user will see an error about the failed i2c transaction.
Fixes: c158d0d4ff ("media: i2c: add DS90UB913 driver")
Reported-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Closes: https://lore.kernel.org/all/a0180488-f7f5-8538-a8bb-52ae52912835@xs4all.nl/
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The flag FBINFO_FLAG_DEFAULT is 0 and has no effect, as struct
fbinfo.flags has been allocated to zero by kzalloc(). So do not
set it.
Flags should signal differences from the default values. After cleaning
up all occurrences of FBINFO_DEFAULT, the token will be removed.
v2:
* fix commit message (Miguel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Andy Walls <awalls@md.metrocast.net>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
CAL uses get_frame_desc to get the VC and DT for the incoming CSI-2
stream, but does it in a bit hacky way. Clean this up by implementing
.get_frame_desc to camera-rx, and calling that from cal.c.
No functional change intended.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Change TI CAL driver to use subdev state. No functional changes
(intended).
This allows us to get rid of the 'formats' field, as the formats are
kept in the state, and also the 'mutex' as we already have state locking.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
We don't do a proper job at freeing resources in cal_camerarx_create's
error paths.
Fix these, and also switch the phy allcation from kzalloc to
devm_kzalloc to simplify the code further.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Clean up the CAL drivers uses of mbus formats:
- Switch all YUV formats from 2X8 formats to 1X16, as those are what
should be used for CSI-2 bus.
- Drop 24 and 32 bit formats, as the driver doesn't support them (see
cal_ctx_pix_proc_config()).
- Switch RGB565_2X8_LE to RGB565_1X16 (for the same reason as for the
YUV formats) and drop RGB565_2X8_BE as it cannot be supported with
CSI-2.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The imx8mq-mipi-csi2 MIPI CSI-2 receiver driver is used and maintained.
There is no reason to keep it in staging. The accompanying CSI bridge
driver that uses it is in drivers/media/platform/nxp as well.
One TODO is to get rid of csi_state's "state" and "lock" variables.
Especially make sure suspend/resume is working without them. That can
very well be worked on from the new location.
Also add a MAINTAINERS section for the imx8mq-mipi-csi2 mipi receiver
driver.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This patch fixes the following checkpatch.pl warning:
WARNING: Avoid multiple line dereference
in file ipu3-css.c
Signed-off-by: Nikolay Kyx <knv418@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
struct i2c_driver::probe_new is about to go away. Switch the driver to
use the probe callback with the same prototype.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
When capturing 1600x900, system could crash when system memory usage is
tight.
The way to reproduce this issue:
1. Use 1600x900 to display on host
2. Mount ISO through 'Virtual media' on OpenBMC's web
3. Run script as below on host to do sha continuously
#!/bin/bash
while [ [1] ];
do
find /media -type f -printf '"%h/%f"\n' | xargs sha256sum
done
4. Open KVM on OpenBMC's web
The size of macro block captured is 8x8. Therefore, we should make sure
the height of src-buf is 8 aligned to fix this issue.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
struct i2c_driver::probe_new() is about to go away. Since I converted
all drivers below drivers/media use struct i2c_driver::probe, three more
drivers were added in the following commits that use .probe_new():
commit 6363db1c9d ("media: i2c: add DS90UB953 driver")
commit c158d0d4ff ("media: i2c: add DS90UB913 driver")
commit afe267f2d3 ("media: i2c: add DS90UB960 driver")
Switch these driver to use the probe callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: use proper commit description style]
Smatch warns:
drivers/media/i2c/ds90ub960.c:1671 ub960_rxport_add_serializer():
err: 'rxport->ser.client' dereferencing possible ERR_PTR()
i2c_new_client_device() returns error pointers on failure and in
dev_dbg statement we are dereferencing error pointer which is a bug.
Fix this by using IS_ERR() which checks for error pointers.
Fixes: afe267f2d3 ("media: i2c: add DS90UB960 driver")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Remove .owner field if calls are used which set it automatically.
to silence the warning:
./drivers/media/i2c/ds90ub953.c:1390:3-8: No need to set .owner here. The core will do it.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5902
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In gl861_i2c_master_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach gl861_i2c_master_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.
Similar commit:
commit 0ed554fd76
("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
If opera1_xilinx_rw fails, the mac address is not initialized.
And opera1_read_mac_address does not handle this failure, which leads to
the uninit-value in dvb_usb_adapter_dvb_init.
Fix this by handling the failure of opera1_xilinx_rw.
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In az6007_i2c_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach az6007_i2c_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.
Similar commit:
commit 0ed554fd76
("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In anysee_master_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach anysee_master_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.
Similar commit:
commit 0ed554fd76
("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: add spaces around +]
In af9005_i2c_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach af9005_i2c_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.
Similar commit:
commit 0ed554fd76
("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In dw2102_i2c_transfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach dw2102_i2c_transfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.
Similar commit:
commit 950e252cb4
("[media] dw2102: limit messages to buffer size")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: retained the line wrap]