Pull networking fixes from David Miller:
1) Encap offset calculation is incorrect in esp6, from Sabrina Dubroca.
2) Better parameter validation in pfkey_dump(), from Mark Salyzyn.
3) Fix several clang issues on powerpc in selftests, from Tanner Love.
4) cmsghdr_from_user_compat_to_kern() uses the wrong length, from Al
Viro.
5) Out of bounds access in mlx5e driver, from Raed Salem.
6) Fix transfer buffer memleak in lan78xx, from Johan Havold.
7) RCU fixups in rhashtable, from Herbert Xu.
8) Fix ipv6 nexthop refcnt leak, from Xiyu Yang.
9) vxlan FDB dump must be done under RCU, from Ido Schimmel.
10) Fix use after free in mlxsw, from Ido Schimmel.
11) Fix map leak in HASH_OF_MAPS bpf code, from Andrii Nakryiko.
12) Fix bug in mac80211 Tx ack status reporting, from Vasanthakumar
Thiagarajan.
13) Fix memory leaks in IPV6_ADDRFORM code, from Cong Wang.
14) Fix bpf program reference count leaks in mlx5 during
mlx5e_alloc_rq(), from Xin Xiong.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (86 commits)
vxlan: fix memleak of fdb
rds: Prevent kernel-infoleak in rds_notify_queue_get()
net/sched: The error lable position is corrected in ct_init_module
net/mlx5e: fix bpf_prog reference count leaks in mlx5e_alloc_rq
net/mlx5e: E-Switch, Specify flow_source for rule with no in_port
net/mlx5e: E-Switch, Add misc bit when misc fields changed for mirroring
net/mlx5e: CT: Support restore ipv6 tunnel
net: gemini: Fix missing clk_disable_unprepare() in error path of gemini_ethernet_port_probe()
ionic: unlock queue mutex in error path
atm: fix atm_dev refcnt leaks in atmtcp_remove_persistent
net: ethernet: mtk_eth_soc: fix MTU warnings
net: nixge: fix potential memory leak in nixge_probe()
devlink: ignore -EOPNOTSUPP errors on dumpit
rxrpc: Fix race between recvmsg and sendmsg on immediate call failure
MAINTAINERS: Replace Thor Thayer as Altera Triple Speed Ethernet maintainer
selftests/bpf: fix netdevsim trap_flow_action_cookie read
ipv6: fix memory leaks on IPV6_ADDRFORM path
net/bpfilter: Initialize pos in __bpfilter_process_sockopt
igb: reinit_locked() should be called with rtnl_lock
e1000e: continue to init PHY even when failed to disable ULP
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXyXDTQAKCRCRxhvAZXjc
olxlAQDCiyWstd8pmtyX4vuaoyDZ6re6P/TCr3mzr6tQyux/zgD/chlfAvJdyzk8
2Tw44odp3gF5EfzF+5wx2whZZPfVrQY=
=Hv2c
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2020-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull thread fix from Christian Brauner:
"A simple spelling fix for dequeue_synchronous_signal()"
* tag 'for-linus-2020-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
signal: fix typo in dequeue_synchronous_signal()
Daniel Borkmann says:
====================
pull-request: bpf 2020-07-31
The following pull-request contains BPF updates for your *net* tree.
We've added 5 non-merge commits during the last 21 day(s) which contain
a total of 5 files changed, 126 insertions(+), 18 deletions(-).
The main changes are:
1) Fix a map element leak in HASH_OF_MAPS map type, from Andrii Nakryiko.
2) Fix a NULL pointer dereference in __btf_resolve_helper_id() when no
btf_vmlinux is available, from Peilin Ye.
3) Init pos variable in __bpfilter_process_sockopt(), from Christoph Hellwig.
4) Fix a cgroup sockopt verifier test by specifying expected attach type,
from Jean-Philippe Brucker.
Note that when net gets merged into net-next later on, there is a small
merge conflict in kernel/bpf/btf.c between commit 5b801dfb7f ("bpf: Fix
NULL pointer dereference in __btf_resolve_helper_id()") from the bpf tree
and commit 138b9a0511 ("bpf: Remove btf_id helpers resolving") from the
net-next tree.
Resolve as follows: remove the old hunk with the __btf_resolve_helper_id()
function. Change the btf_resolve_helper_id() so it actually tests for a
NULL btf_vmlinux and bails out:
int btf_resolve_helper_id(struct bpf_verifier_log *log,
const struct bpf_func_proto *fn, int arg)
{
int id;
if (fn->arg_type[arg] != ARG_PTR_TO_BTF_ID || !btf_vmlinux)
return -EINVAL;
id = fn->btf_id[arg];
if (!id || id > btf_vmlinux->nr_types)
return -EINVAL;
return id;
}
Let me know if you run into any others issues (CC'ing Jiri Olsa so he's in
the loop with regards to merge conflict resolution).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix HASH_OF_MAPS bug of not putting inner map pointer on bpf_map_elem_update()
operation. This is due to per-cpu extra_elems optimization, which bypassed
free_htab_elem() logic doing proper clean ups. Make sure that inner map is put
properly in optimized case as well.
Fixes: 8c290e60fa ("bpf: fix hashmap extra_elems logic")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200729040913.2815687-1-andriin@fb.com
-----BEGIN PGP SIGNATURE-----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=zLU9
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20200729' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit fixes from Paul Moore:
"One small audit fix that you can hopefully merge before v5.8 is
released. Unfortunately it is a revert of a patch that went in during
the v5.7 window and we just recently started to see some bug reports
relating to that commit.
We are working on a proper fix, but I'm not yet clear on when that
will be ready and we need to fix the v5.7 kernels anyway, so in the
interest of time a revert seemed like the best solution right now"
* tag 'audit-pr-20200729' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
revert: 1320a4052e ("audit: trigger accompanying records when no rules present")
This modifies the first 32 bits out of the 128 bits of a random CPU's
net_rand_state on interrupt or CPU activity to complicate remote
observations that could lead to guessing the network RNG's internal
state.
Note that depending on some network devices' interrupt rate moderation
or binding, this re-seeding might happen on every packet or even almost
never.
In addition, with NOHZ some CPUs might not even get timer interrupts,
leaving their local state rarely updated, while they are running
networked processes making use of the random state. For this reason, we
also perform this update in update_process_times() in order to at least
update the state when there is user or system activity, since it's the
only case we care about.
Reported-by: Amit Klein <aksecurity@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Unfortunately the commit listed in the subject line above failed
to ensure that the task's audit_context was properly initialized/set
before enabling the "accompanying records". Depending on the
situation, the resulting audit_context could have invalid values in
some of it's fields which could cause a kernel panic/oops when the
task/syscall exists and the audit records are generated.
We will revisit the original patch, with the necessary fixes, in a
future kernel but right now we just want to fix the kernel panic
with the least amount of added risk.
Cc: stable@vger.kernel.org
Fixes: 1320a4052e ("audit: trigger accompanying records when no rules present")
Reported-by: j2468h@googlemail.com
Signed-off-by: Paul Moore <paul@paul-moore.com>
If a tracee is uprobed and it hits int3 inserted by debugger, handle_swbp()
does send_sig(SIGTRAP, current, 0) which means si_code == SI_USER. This used
to work when this code was written, but then GDB started to validate si_code
and now it simply can't use breakpoints if the tracee has an active uprobe:
# cat test.c
void unused_func(void)
{
}
int main(void)
{
return 0;
}
# gcc -g test.c -o test
# perf probe -x ./test -a unused_func
# perf record -e probe_test:unused_func gdb ./test -ex run
GNU gdb (GDB) 10.0.50.20200714-git
...
Program received signal SIGTRAP, Trace/breakpoint trap.
0x00007ffff7ddf909 in dl_main () from /lib64/ld-linux-x86-64.so.2
(gdb)
The tracee hits the internal breakpoint inserted by GDB to monitor shared
library events but GDB misinterprets this SIGTRAP and reports a signal.
Change handle_swbp() to use force_sig(SIGTRAP), this matches do_int3_user()
and fixes the problem.
This is the minimal fix for -stable, arch/x86/kernel/uprobes.c is equally
wrong; it should use send_sigtrap(TRAP_TRACE) instead of send_sig(SIGTRAP),
but this doesn't confuse GDB and needs another x86-specific patch.
Reported-by: Aaron Merey <amerey@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200723154420.GA32043@redhat.com
Since the default_wake_function() passes its flags onto
try_to_wake_up(), warn if those flags collide with internal values.
Given that the supplied flags are garbage, no repair can be done but at
least alert the user to the damage they are causing.
In the belief that these errors should be picked up during testing, the
warning is only compiled in under CONFIG_SCHED_DEBUG.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20200723201042.18861-1-chris@chris-wilson.co.uk
There is apparently one site that violates the rule that only current
and ttwu() will modify task->state, namely ptrace_{,un}freeze_traced()
will change task->state for a remote task.
Oleg explains:
"TASK_TRACED/TASK_STOPPED was always protected by siglock. In
particular, ttwu(__TASK_TRACED) must be always called with siglock
held. That is why ptrace_freeze_traced() assumes it can safely do
s/TASK_TRACED/__TASK_TRACED/ under spin_lock(siglock)."
This breaks the ordering scheme introduced by commit:
dbfb089d36 ("sched: Fix loadavg accounting race")
Specifically, the reload not matching no longer implies we don't have
to block.
Simply things by noting that what we need is a LOAD->STORE ordering
and this can be provided by a control dependency.
So replace:
prev_state = prev->state;
raw_spin_lock(&rq->lock);
smp_mb__after_spinlock(); /* SMP-MB */
if (... && prev_state && prev_state == prev->state)
deactivate_task();
with:
prev_state = prev->state;
if (... && prev_state) /* CTRL-DEP */
deactivate_task();
Since that already implies the 'prev->state' load must be complete
before allowing the 'prev->on_rq = 0' store to become visible.
Fixes: dbfb089d36 ("sched: Fix loadavg accounting race")
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Tested-by: Christian Brauner <christian.brauner@ubuntu.com>
- A timer which is already expired at enqueue time can set the
base->next_expiry value backwards. As a consequence base->clk can be set
back as well. This can lead to timers expiring early. Add a sanity check
to prevent this.
- When a timer is queued with an expiry time beyond the wheel capacity
then it should be queued in the bucket of the last wheel level which is
expiring last. The code adjusts expiry time to the maximum wheel
capacity, which is only correct when the wheel clock is 0. Aside of that
the check whether the delta is larger than wheel capacity does not check
the delta, it checks the expiry value itself. As a result timers can
expire at random.
Fix this by checking the right variable and adjust expiry time so it
becomes base->clock plus capacity which places it into the outmost
bucket in the last wheel level.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl8URRQTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoQVMD/0VMkT36A8SKbPudMLZ5REp63E629wQ
yuGJz9IJPE1NYB25PXL0TmVAQpseXKDKh3eSP2ac6Ao1FTUk/He/CwF2tsGvu+tm
kxpuPQgeUF8BeF7WzE21k4NeAmTv8eaIxirQPRQBRJldHuNG9u0l1u8dr0rT2mQG
N0djinQvM4bRUVa10l4dz6gE2F0Egjv5sIZohv3E6ORwisJxJoZUUFMlqfuS+2Xt
lOebR8juJahIDRM3ihhZfXJI2tCPD/FnrcMWbk1z3NbsE6C2MiG4ncrjxR2MY81Q
zRr3CrN6TgjTUkvSMOP1SuFePEKLc/2rl5dg9EcGEFNOyggPEezSB/sL1HavRsV9
2s/hmLB6VR5GQwhMnhbLTq3jAI9M9P1S4VEoKHlDs8LoCxtQ+g+2IKmSVqKWXFuO
6AscBbNQkEbrkTx+OkbHWYc7+RLQE87ryCNODeETzSwE0H3NLk/GRQirq6LO9ESq
AjVg5085YZXEIzistsSON0aTdY0eIIVsmaYmFOI0qNPnSUCOPlHIXwD+ju1WEW4h
QtM6BW6xggydgSLgOWQQzKpgBfLW3j7F4r7cFsNCjaQ7UtDQMPMMm+ATBpoT8vdA
EHR/FC4U8ABiXpnleh87B1WCpQr6p6qo95eIbe5UxY3yPdPb32s1/+ycFngW9XPj
B4353TQp7aNRUw==
=aCiv
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull timer fixes from Thomas Gleixner:
"Two fixes for the timer wheel:
- A timer which is already expired at enqueue time can set the
base->next_expiry value backwards. As a consequence base->clk can
be set back as well. This can lead to timers expiring early. Add a
sanity check to prevent this.
- When a timer is queued with an expiry time beyond the wheel
capacity then it should be queued in the bucket of the last wheel
level which is expiring last.
The code adjusted the expiry time to the maximum wheel capacity,
which is only correct when the wheel clock is 0. Aside of that the
check whether the delta is larger than wheel capacity does not
check the delta, it checks the expiry value itself. As a result
timers can expire at random.
Fix this by checking the right variable and adjust expiry time so
it becomes base->clock plus capacity which places it into the
outmost bucket in the last wheel level"
* tag 'timers-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timer: Fix wheel index calculation on last level
timer: Prevent base->clk from moving backward
- Plug a load average accounting race which was introduced with a recent
optimization casing load average to show bogus numbers.
- Fix the rseq CPU id initialization for new tasks. sched_fork() does not
update the rseq CPU id so the id is the stale id of the parent task,
which can cause user space data corruption.
- Handle a 0 return value of task_h_load() correctly in the load balancer,
which does not decrease imbalance and therefore pulls until the maximum
number of loops is reached, which might be all tasks just created by a
fork bomb.
-----BEGIN PGP SIGNATURE-----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=bCPw
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull scheduler fixes from Thomas Gleixner:
"A set of scheduler fixes:
- Plug a load average accounting race which was introduced with a
recent optimization casing load average to show bogus numbers.
- Fix the rseq CPU id initialization for new tasks. sched_fork() does
not update the rseq CPU id so the id is the stale id of the parent
task, which can cause user space data corruption.
- Handle a 0 return value of task_h_load() correctly in the load
balancer, which does not decrease imbalance and therefore pulls
until the maximum number of loops is reached, which might be all
tasks just created by a fork bomb"
* tag 'sched-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: handle case of task_h_load() returning 0
sched: Fix unreliable rseq cpu_id for new tasks
sched: Fix loadavg accounting race
- Make the handling of the firmware node consistent and do not free the
node after the domain has been created successfully. The core code
stores a pointer to it which can lead to a use after free or double
free.
This used to "work" because the pointer was not stored when the initial
code was written, but at some point later it was required to store
it. Of course nobody noticed that the existing users break that way.
- Handle affinity setting on inactive interrupts correctly when
hierarchical irq domains are enabled. When interrupts are inactive with
the modern hierarchical irqdomain design, the interrupt chips are not
necessarily in a state where affinity changes can be handled. The legacy
irq chip design allowed this because interrupts are immediately fully
initialized at allocation time. X86 has a hacky workaround for this, but
other implementations do not. This cased malfunction on GIC-V3. Instead
of playing whack a mole to find all affected drivers, change the core
code to store the requested affinity setting and then establish it when
the interrupt is allocated, which makes the X86 hack go away.
-----BEGIN PGP SIGNATURE-----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=elM3
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull irq fixes from Thomas Gleixner:
"Two fixes for the interrupt subsystem:
- Make the handling of the firmware node consistent and do not free
the node after the domain has been created successfully. The core
code stores a pointer to it which can lead to a use after free or
double free.
This used to "work" because the pointer was not stored when the
initial code was written, but at some point later it was required
to store it. Of course nobody noticed that the existing users break
that way.
- Handle affinity setting on inactive interrupts correctly when
hierarchical irq domains are enabled.
When interrupts are inactive with the modern hierarchical irqdomain
design, the interrupt chips are not necessarily in a state where
affinity changes can be handled. The legacy irq chip design allowed
this because interrupts are immediately fully initialized at
allocation time. X86 has a hacky workaround for this, but other
implementations do not.
This cased malfunction on GIC-V3. Instead of playing whack a mole
to find all affected drivers, change the core code to store the
requested affinity setting and then establish it when the interrupt
is allocated, which makes the X86 hack go away"
* tag 'irq-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/affinity: Handle affinity setting on inactive interrupts correctly
irqdomain/treewide: Keep firmware node unconditionally allocated
Setting interrupt affinity on inactive interrupts is inconsistent when
hierarchical irq domains are enabled. The core code should just store the
affinity and not call into the irq chip driver for inactive interrupts
because the chip drivers may not be in a state to handle such requests.
X86 has a hacky workaround for that but all other irq chips have not which
causes problems e.g. on GIC V3 ITS.
Instead of adding more ugly hacks all over the place, solve the problem in
the core code. If the affinity is set on an inactive interrupt then:
- Store it in the irq descriptors affinity mask
- Update the effective affinity to reflect that so user space has
a consistent view
- Don't call into the irq chip driver
This is the core equivalent of the X86 workaround and works correctly
because the affinity setting is established in the irq chip when the
interrupt is activated later on.
Note, that this is only effective when hierarchical irq domains are enabled
by the architecture. Doing it unconditionally would break legacy irq chip
implementations.
For hierarchial irq domains this works correctly as none of the drivers can
have a dependency on affinity setting in inactive state by design.
Remove the X86 workaround as it is not longer required.
Fixes: 02edee152d ("x86/apic/vector: Ignore set_affinity call for inactive interrupts")
Reported-by: Ali Saidi <alisaidi@amazon.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Ali Saidi <alisaidi@amazon.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200529015501.15771-1-alisaidi@amazon.com
Link: https://lkml.kernel.org/r/877dv2rv25.fsf@nanos.tec.linutronix.de
When an expiration delta falls into the last level of the wheel, that delta
has be compared against the maximum possible delay and reduced to fit in if
necessary.
However instead of comparing the delta against the maximum, the code
compares the actual expiry against the maximum. Then instead of fixing the
delta to fit in, it sets the maximum delta as the expiry value.
This can result in various undesired outcomes, the worst possible one
being a timer expiring 15 days ahead to fire immediately.
Fixes: 500462a9de ("timers: Switch to a non-cascading wheel")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200717140551.29076-2-frederic@kernel.org
task_h_load() can return 0 in some situations like running stress-ng
mmapfork, which forks thousands of threads, in a sched group on a 224 cores
system. The load balance doesn't handle this correctly because
env->imbalance never decreases and it will stop pulling tasks only after
reaching loop_max, which can be equal to the number of running tasks of
the cfs. Make sure that imbalance will be decreased by at least 1.
misfit task is the other feature that doesn't handle correctly such
situation although it's probably more difficult to face the problem
because of the smaller number of CPUs and running tasks on heterogenous
system.
We can't simply ensure that task_h_load() returns at least one because it
would imply to handle underflow in other places.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: <stable@vger.kernel.org> # v4.4+
Link: https://lkml.kernel.org/r/20200710152426.16981-1-vincent.guittot@linaro.org
There is no guarantee to CMA's placement, so allocating a zone specific
atomic pool from CMA might return memory from a completely different
memory zone. So stop using it.
Fixes: c84dc6e68a ("dma-pool: add additional coherent pools to map to gfp mask")
Reported-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When allocating DMA memory from a pool, the core can only guess which
atomic pool will fit a device's constraints. If it doesn't, get a safer
atomic pool and try again.
Fixes: c84dc6e68a ("dma-pool: add additional coherent pools to map to gfp mask")
Reported-by: Jeremy Linton <jeremy.linton@arm.com>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
dma-pool's dev_to_pool() creates the false impression that there is a
way to grantee a mapping between a device's DMA constraints and an
atomic pool. It tuns out it's just a guess, and the device might need to
use an atomic pool containing memory from a 'safer' (or lower) memory
zone.
To help mitigate this, introduce dma_guess_pool() which can be fed a
device's DMA constraints and atomic pools already known to be faulty, in
order for it to provide an better guess on which pool to use.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The function is only used once and can be simplified to a one-liner.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
dma_coherent_ok() checks if a physical memory area fits a device's DMA
constraints.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
I have a few KGDB-related fixes that I'd like to target for 5.8-rc5. They're
mostly fixes for build warnings, but there's also:
* Support for the qSupported and qXfer packets, which are necessary to pass
around GDB XML information which we need for the RISC-V GDB port to fully
function.
* Users can now select STRICT_KERNEL_RWX instead of forcing it on.
I know it's a bit late for rc5, as these are not critical it's not a big deal
if they don't make it in.
-----BEGIN PGP SIGNATURE-----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=kyQD
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"I have a few KGDB-related fixes. They're mostly fixes for build
warnings, but there's also:
- Support for the qSupported and qXfer packets, which are necessary
to pass around GDB XML information which we need for the RISC-V GDB
port to fully function.
- Users can now select STRICT_KERNEL_RWX instead of forcing it on"
* tag 'riscv-for-linus-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Avoid kgdb.h including gdb_xml.h to solve unused-const-variable warning
kgdb: Move the extern declaration kgdb_has_hit_break() to generic kgdb.h
riscv: Fix "no previous prototype" compile warning in kgdb.c file
riscv: enable the Kconfig prompt of STRICT_KERNEL_RWX
kgdb: enable arch to support XML packet.
Pull networking fixes from David Miller:
1) Restore previous behavior of CAP_SYS_ADMIN wrt loading networking
BPF programs, from Maciej Żenczykowski.
2) Fix dropped broadcasts in mac80211 code, from Seevalamuthu
Mariappan.
3) Slay memory leak in nl80211 bss color attribute parsing code, from
Luca Coelho.
4) Get route from skb properly in ip_route_use_hint(), from Miaohe Lin.
5) Don't allow anything other than ARPHRD_ETHER in llc code, from Eric
Dumazet.
6) xsk code dips too deeply into DMA mapping implementation internals.
Add dma_need_sync and use it. From Christoph Hellwig
7) Enforce power-of-2 for BPF ringbuf sizes. From Andrii Nakryiko.
8) Check for disallowed attributes when loading flow dissector BPF
programs. From Lorenz Bauer.
9) Correct packet injection to L3 tunnel devices via AF_PACKET, from
Jason A. Donenfeld.
10) Don't advertise checksum offload on ipa devices that don't support
it. From Alex Elder.
11) Resolve several issues in TCP MD5 signature support. Missing memory
barriers, bogus options emitted when using syncookies, and failure
to allow md5 key changes in established states. All from Eric
Dumazet.
12) Fix interface leak in hsr code, from Taehee Yoo.
13) VF reset fixes in hns3 driver, from Huazhong Tan.
14) Make loopback work again with ipv6 anycast, from David Ahern.
15) Fix TX starvation under high load in fec driver, from Tobias
Waldekranz.
16) MLD2 payload lengths not checked properly in bridge multicast code,
from Linus Lüssing.
17) Packet scheduler code that wants to find the inner protocol
currently only works for one level of VLAN encapsulation. Allow
Q-in-Q situations to work properly here, from Toke
Høiland-Jørgensen.
18) Fix route leak in l2tp, from Xin Long.
19) Resolve conflict between the sk->sk_user_data usage of bpf reuseport
support and various protocols. From Martin KaFai Lau.
20) Fix socket cgroup v2 reference counting in some situations, from
Cong Wang.
21) Cure memory leak in mlx5 connection tracking offload support, from
Eli Britstein.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits)
mlxsw: pci: Fix use-after-free in case of failed devlink reload
mlxsw: spectrum_router: Remove inappropriate usage of WARN_ON()
net: macb: fix call to pm_runtime in the suspend/resume functions
net: macb: fix macb_suspend() by removing call to netif_carrier_off()
net: macb: fix macb_get/set_wol() when moving to phylink
net: macb: mark device wake capable when "magic-packet" property present
net: macb: fix wakeup test in runtime suspend/resume routines
bnxt_en: fix NULL dereference in case SR-IOV configuration fails
libbpf: Fix libbpf hashmap on (I)LP32 architectures
net/mlx5e: CT: Fix memory leak in cleanup
net/mlx5e: Fix port buffers cell size value
net/mlx5e: Fix 50G per lane indication
net/mlx5e: Fix CPU mapping after function reload to avoid aRFS RX crash
net/mlx5e: Fix VXLAN configuration restore after function reload
net/mlx5e: Fix usage of rcu-protected pointer
net/mxl5e: Verify that rpriv is not NULL
net/mlx5: E-Switch, Fix vlan or qos setting in legacy mode
net/mlx5: Fix eeprom support for SFP module
cgroup: Fix sock_cgroup_data on big-endian.
selftests: bpf: Fix detach from sockmap tests
...
- add a warning when the atomic pool is depleted (David Rientjes)
- protect the parameters of the new scatterlist helper macros
(Marek Szyprowski )
-----BEGIN PGP SIGNATURE-----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=KI5i
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.8-5' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- add a warning when the atomic pool is depleted (David Rientjes)
- protect the parameters of the new scatterlist helper macros (Marek
Szyprowski )
* tag 'dma-mapping-5.8-5' of git://git.infradead.org/users/hch/dma-mapping:
scatterlist: protect parameters of the sg_table related macros
dma-mapping: warn when coherent pool is depleted
The XML packet could be supported by required architecture if the
architecture defines CONFIG_HAVE_ARCH_KGDB_QXFER_PKT and implement its own
kgdb_arch_handle_qxfer_pkt(). Except for the kgdb_arch_handle_qxfer_pkt(),
the architecture also needs to record the feature supported by gdb stub
into the kgdb_arch_gdb_stub_feature, and these features will be reported
to host gdb when gdb stub receives the qSupported packet.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Several users of kallsyms_show_value() were performing checks not
during "open". Refactor everything needed to gain proper checks against
file->f_cred for modules, kprobes, and bpf.
-----BEGIN PGP SIGNATURE-----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=ib5Q
-----END PGP SIGNATURE-----
Merge tag 'kallsyms_show_value-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kallsyms fix from Kees Cook:
"Refactor kallsyms_show_value() users for correct cred.
I'm not delighted by the timing of getting these changes to you, but
it does fix a handful of kernel address exposures, and no one has
screamed yet at the patches.
Several users of kallsyms_show_value() were performing checks not
during "open". Refactor everything needed to gain proper checks
against file->f_cred for modules, kprobes, and bpf"
* tag 'kallsyms_show_value-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests: kmod: Add module address visibility test
bpf: Check correct cred for CAP_SYSLOG in bpf_dump_raw_ok()
kprobes: Do not expose probe addresses to non-CAP_SYSLOG
module: Do not expose section addresses to non-CAP_SYSLOG
module: Refactor section attr into bin attribute
kallsyms: Refactor kallsyms_show_value() to take cred
bpf_sk_reuseport_detach is currently called when sk->sk_user_data
is not NULL. It is incorrect because sk->sk_user_data may not be
managed by the bpf's reuseport_array. It has been reported in [1] that,
the bpf_sk_reuseport_detach() which is called from udp_lib_unhash() has
corrupted the sk_user_data managed by l2tp.
This patch solves it by using another bit (defined as SK_USER_DATA_BPF)
of the sk_user_data pointer value. It marks that a sk_user_data is
managed/owned by BPF.
The patch depends on a PTRMASK introduced in
commit f1ff5ce2cd ("net, sk_msg: Clear sk_user_data pointer on clone if tagged").
[ Note: sk->sk_user_data is used by bpf's reuseport_array only when a sk is
added to the bpf's reuseport_array.
i.e. doing setsockopt(SO_REUSEPORT) and having "sk->sk_reuseport == 1"
alone will not stop sk->sk_user_data being used by other means. ]
[1]: https://lore.kernel.org/netdev/20200706121259.GA20199@katalix.com/
Fixes: 5dc4c4b7d4 ("bpf: Introduce BPF_MAP_TYPE_REUSEPORT_SOCKARRAY")
Reported-by: James Chapman <jchapman@katalix.com>
Reported-by: syzbot+9f092552ba9a5efca5df@syzkaller.appspotmail.com
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: James Chapman <jchapman@katalix.com>
Acked-by: James Chapman <jchapman@katalix.com>
Link: https://lore.kernel.org/bpf/20200709061110.4019316-1-kafai@fb.com
It makes little sense for copying sk_user_data of reuseport_array during
sk_clone_lock(). This patch reuses the SK_USER_DATA_NOCOPY bit introduced in
commit f1ff5ce2cd ("net, sk_msg: Clear sk_user_data pointer on clone if tagged").
It is used to mark the sk_user_data is not supposed to be copied to its clone.
Although the cloned sk's sk_user_data will not be used/freed in
bpf_sk_reuseport_detach(), this change can still allow the cloned
sk's sk_user_data to be used by some other means.
Freeing the reuseport_array's sk_user_data does not require a rcu grace
period. Thus, the existing rcu_assign_sk_user_data_nocopy() is not
used.
Fixes: 5dc4c4b7d4 ("bpf: Introduce BPF_MAP_TYPE_REUSEPORT_SOCKARRAY")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20200709061104.4018798-1-kafai@fb.com
When a timer is enqueued with a negative delta (ie: expiry is below
base->clk), it gets added to the wheel as expiring now (base->clk).
Yet the value that gets stored in base->next_expiry, while calling
trigger_dyntick_cpu(), is the initial timer->expires value. The
resulting state becomes:
base->next_expiry < base->clk
On the next timer enqueue, forward_timer_base() may accidentally
rewind base->clk. As a possible outcome, timers may expire way too
early, the worst case being that the highest wheel levels get spuriously
processed again.
To prevent from that, make sure that base->next_expiry doesn't get below
base->clk.
Fixes: a683f390b9 ("timers: Forward the wheel clock whenever possible")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200703010657.2302-1-frederic@kernel.org
When evaluating access control over kallsyms visibility, credentials at
open() time need to be used, not the "current" creds (though in BPF's
case, this has likely always been the same). Plumb access to associated
file->f_cred down through bpf_dump_raw_ok() and its callers now that
kallsysm_show_value() has been refactored to take struct cred.
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: bpf@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 7105e828c0 ("bpf: allow for correlation of maps and helpers in dump")
Signed-off-by: Kees Cook <keescook@chromium.org>
The kprobe show() functions were using "current"'s creds instead
of the file opener's creds for kallsyms visibility. Fix to use
seq_file->file->f_cred.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 81365a947d ("kprobes: Show address of kprobes if kallsyms does")
Fixes: ffb9bd68eb ("kprobes: Show blacklist addresses as same as kallsyms does")
Signed-off-by: Kees Cook <keescook@chromium.org>
In order to gain access to the open file's f_cred for kallsym visibility
permission checks, refactor the module section attributes to use the
bin_attribute instead of attribute interface. Additionally removes the
redundant "name" struct member.
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
In order to perform future tests against the cred saved during open(),
switch kallsyms_show_value() to operate on a cred, and have all current
callers pass current_cred(). This makes it very obvious where callers
are checking the wrong credential in their "read" contexts. These will
be fixed in the coming patches.
Additionally switch return value to bool, since it is always used as a
direct permission check, not a 0-on-success, negative-on-error style
function return.
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
While integrating rseq into glibc and replacing glibc's sched_getcpu
implementation with rseq, glibc's tests discovered an issue with
incorrect __rseq_abi.cpu_id field value right after the first time
a newly created process issues sched_setaffinity.
For the records, it triggers after building glibc and running tests, and
then issuing:
for x in {1..2000} ; do posix/tst-affinity-static & done
and shows up as:
error: Unexpected CPU 2, expected 0
error: Unexpected CPU 2, expected 0
error: Unexpected CPU 2, expected 0
error: Unexpected CPU 2, expected 0
error: Unexpected CPU 138, expected 0
error: Unexpected CPU 138, expected 0
error: Unexpected CPU 138, expected 0
error: Unexpected CPU 138, expected 0
This is caused by the scheduler invoking __set_task_cpu() directly from
sched_fork() and wake_up_new_task(), thus bypassing rseq_migrate() which
is done by set_task_cpu().
Add the missing rseq_migrate() to both functions. The only other direct
use of __set_task_cpu() is done by init_idle(), which does not involve a
user-space task.
Based on my testing with the glibc test-case, just adding rseq_migrate()
to wake_up_new_task() is sufficient to fix the observed issue. Also add
it to sched_fork() to keep things consistent.
The reason why this never triggered so far with the rseq/basic_test
selftest is unclear.
The current use of sched_getcpu(3) does not typically require it to be
always accurate. However, use of the __rseq_abi.cpu_id field within rseq
critical sections requires it to be accurate. If it is not accurate, it
can cause corruption in the per-cpu data targeted by rseq critical
sections in user-space.
Reported-By: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-By: Florian Weimer <fweimer@redhat.com>
Cc: stable@vger.kernel.org # v4.18+
Link: https://lkml.kernel.org/r/20200707201505.2632-1-mathieu.desnoyers@efficios.com
The recent commit:
c6e7bd7afa ("sched/core: Optimize ttwu() spinning on p->on_cpu")
moved these lines in ttwu():
p->sched_contributes_to_load = !!task_contributes_to_load(p);
p->state = TASK_WAKING;
up before:
smp_cond_load_acquire(&p->on_cpu, !VAL);
into the 'p->on_rq == 0' block, with the thinking that once we hit
schedule() the current task cannot change it's ->state anymore. And
while this is true, it is both incorrect and flawed.
It is incorrect in that we need at least an ACQUIRE on 'p->on_rq == 0'
to avoid weak hardware from re-ordering things for us. This can fairly
easily be achieved by relying on the control-dependency already in
place.
The second problem, which makes the flaw in the original argument, is
that while schedule() will not change prev->state, it will read it a
number of times (arguably too many times since it's marked volatile).
The previous condition 'p->on_cpu == 0' was sufficient because that
indicates schedule() has completed, and will no longer read
prev->state. So now the trick is to make this same true for the (much)
earlier 'prev->on_rq == 0' case.
Furthermore, in order to make the ordering stick, the 'prev->on_rq = 0'
assignment needs to he a RELEASE, but adding additional ordering to
schedule() is an unwelcome proposition at the best of times, doubly so
for mere accounting.
Luckily we can push the prev->state load up before rq->lock, with the
only caveat that we then have to re-read the state after. However, we
know that if it changed, we no longer have to worry about the blocking
path. This gives us the required ordering, if we block, we did the
prev->state load before an (effective) smp_mb() and the p->on_rq store
needs not change.
With this we end up with the effective ordering:
LOAD p->state LOAD-ACQUIRE p->on_rq == 0
MB
STORE p->on_rq, 0 STORE p->state, TASK_WAKING
which ensures the TASK_WAKING store happens after the prev->state
load, and all is well again.
Fixes: c6e7bd7afa ("sched/core: Optimize ttwu() spinning on p->on_cpu")
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Dave Jones <davej@codemonkey.org.uk>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Link: https://lkml.kernel.org/r/20200707102957.GN117543@hirez.programming.kicks-ass.net
When we clone a socket in sk_clone_lock(), its sk_cgrp_data is
copied, so the cgroup refcnt must be taken too. And, unlike the
sk_alloc() path, sock_update_netprioidx() is not called here.
Therefore, it is safe and necessary to grab the cgroup refcnt
even when cgroup_sk_alloc is disabled.
sk_clone_lock() is in BH context anyway, the in_interrupt()
would terminate this function if called there. And for sk_alloc()
skcd->val is always zero. So it's safe to factor out the code
to make it more readable.
The global variable 'cgroup_sk_alloc_disabled' is used to determine
whether to take these reference counts. It is impossible to make
the reference counting correct unless we save this bit of information
in skcd->val. So, add a new bit there to record whether the socket
has already taken the reference counts. This obviously relies on
kmalloc() to align cgroup pointers to at least 4 bytes,
ARCH_KMALLOC_MINALIGN is certainly larger than that.
This bug seems to be introduced since the beginning, commit
d979a39d72 ("cgroup: duplicate cgroup reference when cloning sockets")
tried to fix it but not compeletely. It seems not easy to trigger until
the recent commit 090e28b229
("netprio_cgroup: Fix unlimited memory leak of v2 cgroups") was merged.
Fixes: bd1060a1d6 ("sock, cgroup: add sock->sk_cgroup")
Reported-by: Cameron Berkenpas <cam@neo-zeon.de>
Reported-by: Peter Geis <pgwipeout@gmail.com>
Reported-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reported-by: Daniël Sonck <dsonck92@gmail.com>
Reported-by: Zhang Qiang <qiang.zhang@windriver.com>
Tested-by: Cameron Berkenpas <cam@neo-zeon.de>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Zefan Li <lizefan@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=p6ry
-----END PGP SIGNATURE-----
Merge tag 'core-urgent-2020-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull rcu fixlet from Thomas Gleixner:
"A single fix for a printk format warning in RCU"
* tag 'core-urgent-2020-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rcuperf: Fix printk format warning
Fix the recently added new __vmalloc_node_range callers to pass the
correct values as the owner for display in /proc/vmallocinfo.
Fixes: 800e26b813 ("x86/hyperv: allocate the hypercall page with only read and execute bits")
Fixes: 10d5e97c1b ("arm64: use PAGE_KERNEL_ROX directly in alloc_insn_page")
Fixes: 7a0e27b2a0 ("mm: remove vmalloc_exec")
Reported-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200627075649.2455097-1-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXv20ggAKCRCRxhvAZXjc
osYAAQD4Lp5ORPJv5jtYScxRM1RiUh8hp2MBle+4iYCAQX/UowD/QtMPtiLWaMIw
6bMMBAj1gVBmlIOmu7DhBs8hVtKugQY=
=kNpi
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2020-07-02' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull data race annotation from Christian Brauner:
"This contains an annotation patch for a data race in copy_process()
reported by KCSAN when reading and writing nr_threads.
The data race is intentional and benign. This is obvious from the
comment above the relevant code and based on general consensus when
discussing this issue. So simply using data_race() to annotate this as
an intentional race seems the best option"
* tag 'for-linus-2020-07-02' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
fork: annotate data race in copy_process()
-----BEGIN PGP SIGNATURE-----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=4lvI
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.8-2020-07-01' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"One fix in here, for a regression in 5.7 where a task is waiting in
the kernel for a condition, but that condition won't become true until
task_work is run. And the task_work can't be run exactly because the
task is waiting in the kernel, so we'll never make any progress.
One example of that is registering an eventfd and queueing io_uring
work, and then the task goes and waits in eventfd read with the
expectation that it'll get woken (and read an event) when the io_uring
request completes. The io_uring request is finished through task_work,
which won't get run while the task is looping in eventfd read"
* tag 'io_uring-5.8-2020-07-01' of git://git.kernel.dk/linux-block:
io_uring: use signal based task_work running
task_work: teach task_work_add() to do signal_wake_up()
Daniel Borkmann says:
====================
pull-request: bpf 2020-06-30
The following pull-request contains BPF updates for your *net* tree.
We've added 28 non-merge commits during the last 9 day(s) which contain
a total of 35 files changed, 486 insertions(+), 232 deletions(-).
The main changes are:
1) Fix an incorrect verifier branch elimination for PTR_TO_BTF_ID pointer
types, from Yonghong Song.
2) Fix UAPI for sockmap and flow_dissector progs that were ignoring various
arguments passed to BPF_PROG_{ATTACH,DETACH}, from Lorenz Bauer & Jakub Sitnicki.
3) Fix broken AF_XDP DMA hacks that are poking into dma-direct and swiotlb
internals and integrate it properly into DMA core, from Christoph Hellwig.
4) Fix RCU splat from recent changes to avoid skipping ingress policy when
kTLS is enabled, from John Fastabend.
5) Fix BPF ringbuf map to enforce size to be the power of 2 in order for its
position masking to work, from Andrii Nakryiko.
6) Fix regression from CAP_BPF work to re-allow CAP_SYS_ADMIN for loading
of network programs, from Maciej Żenczykowski.
7) Fix libbpf section name prefix for devmap progs, from Jesper Dangaard Brouer.
8) Fix formatting in UAPI documentation for BPF helpers, from Quentin Monnet.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Wenbo reported an issue in [1] where a checking of null
pointer is evaluated as always false. In this particular
case, the program type is tp_btf and the pointer to
compare is a PTR_TO_BTF_ID.
The current verifier considers PTR_TO_BTF_ID always
reprents a non-null pointer, hence all PTR_TO_BTF_ID compares
to 0 will be evaluated as always not-equal, which resulted
in the branch elimination.
For example,
struct bpf_fentry_test_t {
struct bpf_fentry_test_t *a;
};
int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
{
if (arg == 0)
test7_result = 1;
return 0;
}
int BPF_PROG(test8, struct bpf_fentry_test_t *arg)
{
if (arg->a == 0)
test8_result = 1;
return 0;
}
In above bpf programs, both branch arg == 0 and arg->a == 0
are removed. This may not be what developer expected.
The bug is introduced by Commit cac616db39 ("bpf: Verifier
track null pointer branch_taken with JNE and JEQ"),
where PTR_TO_BTF_ID is considered to be non-null when evaluting
pointer vs. scalar comparison. This may be added
considering we have PTR_TO_BTF_ID_OR_NULL in the verifier
as well.
PTR_TO_BTF_ID_OR_NULL is added to explicitly requires
a non-NULL testing in selective cases. The current generic
pointer tracing framework in verifier always
assigns PTR_TO_BTF_ID so users does not need to
check NULL pointer at every pointer level like a->b->c->d.
We may not want to assign every PTR_TO_BTF_ID as
PTR_TO_BTF_ID_OR_NULL as this will require a null test
before pointer dereference which may cause inconvenience
for developers. But we could avoid branch elimination
to preserve original code intention.
This patch simply removed PTR_TO_BTD_ID from reg_type_not_null()
in verifier, which prevented the above branches from being eliminated.
[1]: https://lore.kernel.org/bpf/79dbb7c0-449d-83eb-5f4f-7af0cc269168@fb.com/T/
Fixes: cac616db39 ("bpf: Verifier track null pointer branch_taken with JNE and JEQ")
Reported-by: Wenbo Zhang <ethercflow@gmail.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200630171240.2523722-1-yhs@fb.com
So that the target task will exit the wait_event_interruptible-like
loop and call task_work_run() asap.
The patch turns "bool notify" into 0,TWA_RESUME,TWA_SIGNAL enum, the
new TWA_SIGNAL flag implies signal_wake_up(). However, it needs to
avoid the race with recalc_sigpending(), so the patch also adds the
new JOBCTL_TASK_WORK bit included in JOBCTL_PENDING_MASK.
TODO: once this patch is merged we need to change all current users
of task_work_add(notify = true) to use TWA_RESUME.
Cc: stable@vger.kernel.org # v5.7
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Iterating over BPF links attached to network namespace in pre_exit hook is
not safe, even if there is just one. Once link gets auto-detached, that is
its back-pointer to net object is set to NULL, the link can be released and
freed without waiting on netns_bpf_mutex, effectively causing the list
element we are operating on to be freed.
This leads to use-after-free when trying to access the next element on the
list, as reported by KASAN. Bug can be triggered by destroying a network
namespace, while also releasing a link attached to this network namespace.
| ==================================================================
| BUG: KASAN: use-after-free in netns_bpf_pernet_pre_exit+0xd9/0x130
| Read of size 8 at addr ffff888119e0d778 by task kworker/u8:2/177
|
| CPU: 3 PID: 177 Comm: kworker/u8:2 Not tainted 5.8.0-rc1-00197-ga0c04c9d1008-dirty #776
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014
| Workqueue: netns cleanup_net
| Call Trace:
| dump_stack+0x9e/0xe0
| print_address_description.constprop.0+0x3a/0x60
| ? netns_bpf_pernet_pre_exit+0xd9/0x130
| kasan_report.cold+0x1f/0x40
| ? netns_bpf_pernet_pre_exit+0xd9/0x130
| netns_bpf_pernet_pre_exit+0xd9/0x130
| cleanup_net+0x30b/0x5b0
| ? unregister_pernet_device+0x50/0x50
| ? rcu_read_lock_bh_held+0xb0/0xb0
| ? _raw_spin_unlock_irq+0x24/0x50
| process_one_work+0x4d1/0xa10
| ? lock_release+0x3e0/0x3e0
| ? pwq_dec_nr_in_flight+0x110/0x110
| ? rwlock_bug.part.0+0x60/0x60
| worker_thread+0x7a/0x5c0
| ? process_one_work+0xa10/0xa10
| kthread+0x1e3/0x240
| ? kthread_create_on_node+0xd0/0xd0
| ret_from_fork+0x1f/0x30
|
| Allocated by task 280:
| save_stack+0x1b/0x40
| __kasan_kmalloc.constprop.0+0xc2/0xd0
| netns_bpf_link_create+0xfe/0x650
| __do_sys_bpf+0x153a/0x2a50
| do_syscall_64+0x59/0x300
| entry_SYSCALL_64_after_hwframe+0x44/0xa9
|
| Freed by task 198:
| save_stack+0x1b/0x40
| __kasan_slab_free+0x12f/0x180
| kfree+0xed/0x350
| process_one_work+0x4d1/0xa10
| worker_thread+0x7a/0x5c0
| kthread+0x1e3/0x240
| ret_from_fork+0x1f/0x30
|
| The buggy address belongs to the object at ffff888119e0d700
| which belongs to the cache kmalloc-192 of size 192
| The buggy address is located 120 bytes inside of
| 192-byte region [ffff888119e0d700, ffff888119e0d7c0)
| The buggy address belongs to the page:
| page:ffffea0004678340 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0
| flags: 0x2fffe0000000200(slab)
| raw: 02fffe0000000200 ffffea00045ba8c0 0000000600000006 ffff88811a80ea80
| raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
| page dumped because: kasan: bad access detected
|
| Memory state around the buggy address:
| ffff888119e0d600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
| ffff888119e0d680: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
| >ffff888119e0d700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
| ^
| ffff888119e0d780: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
| ffff888119e0d800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
| ==================================================================
Remove the "fast-path" for releasing a link that got auto-detached by a
dying network namespace to fix it. This way as long as link is on the list
and netns_bpf mutex is held, we have a guarantee that link memory can be
accessed.
An alternative way to fix this issue would be to safely iterate over the
list of links and ensure there is no access to link object after detaching
it. But, at the moment, optimizing synchronization overhead on link release
without a workload in mind seems like an overkill.
Fixes: ab53cad90e ("bpf, netns: Keep a list of attached bpf_link's")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200630164541.1329993-1-jakub@cloudflare.com
The sockmap code currently ignores the value of attach_bpf_fd when
detaching a program. This is contrary to the usual behaviour of
checking that attach_bpf_fd represents the currently attached
program.
Ensure that attach_bpf_fd is indeed the currently attached
program. It turns out that all sockmap selftests already do this,
which indicates that this is unlikely to cause breakage.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200629095630.7933-5-lmb@cloudflare.com
Using BPF_PROG_DETACH on a flow dissector program supports neither
attach_flags nor attach_bpf_fd. Yet no value is enforced for them.
Enforce that attach_flags are zero, and require the current program
to be passed via attach_bpf_fd. This allows us to remove the check
for CAP_SYS_ADMIN, since userspace can now no longer remove
arbitrary flow dissector programs.
Fixes: b27f7bb590 ("flow_dissector: Move out netns_bpf prog callbacks")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200629095630.7933-3-lmb@cloudflare.com
