When of_overlay_fdt_apply() fails, the changeset may be partially
applied, and the caller is still expected to call of_overlay_remove() to
clean up this partial state.
However, of_overlay_apply() calls of_resolve_phandles() before
init_overlay_changeset(). Hence if the overlay fails to apply due to an
unresolved symbol, the overlay_changeset.cset.entries list is still
uninitialized, and cleanup will crash with a NULL-pointer dereference in
overlay_removal_is_ok().
Fix this by moving the call to of_changeset_init() from
init_overlay_changeset() to of_overlay_fdt_apply(), where all other
early initialization is done.
Fixes: f948d6d8b7 ("of: overlay: avoid race condition between applying multiple overlays")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/4f1d6d74b61cba2599026adb6d1948ae559ce91f.1690533838.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
Enhance the changeset unittest to ensure after a revert, the tree matches
the original tree before the changeset was applied. Specifically, check an
added node is removed, a removed property is added back, and an updated
property has its original value.
Signed-off-by: Rob Herring <robh@kernel.org>
pci_dt_testdrv is bound to QEMU PCI Test Device. It reads
overlay_pci_node fdt fragment and apply it to Test Device. Then it
calls of_platform_default_populate() to populate the platform
devices.
Tested-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/1692120000-46900-6-git-send-email-lizhi.hou@amd.com
Signed-off-by: Rob Herring <robh@kernel.org>
Currently, in an overlay fdt fragment, it needs to specify the exact
location in base DT. In another word, when the fdt fragment is generated,
the base DT location for the fragment is already known.
There is new use case that the base DT location is unknown when fdt
fragment is generated. For example, the add-on device provide a fdt
overlay with its firmware to describe its downstream devices. Because it
is add-on device which can be plugged to different systems, its firmware
will not be able to know the overlay location in base DT. Instead, the
device driver will load the overlay fdt and apply it to base DT at runtime.
In this case, of_overlay_fdt_apply() needs to be extended to specify
the target node for device driver to apply overlay fdt.
int overlay_fdt_apply(..., struct device_node *base);
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/1692120000-46900-5-git-send-email-lizhi.hou@amd.com
Signed-off-by: Rob Herring <robh@kernel.org>
of_changeset_create_node() creates device node dynamically and attaches
the newly created node to a changeset.
Expand of_changeset APIs to handle specific types of properties.
of_changeset_add_prop_string()
of_changeset_add_prop_string_array()
of_changeset_add_prop_u32_array()
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/1692120000-46900-2-git-send-email-lizhi.hou@amd.com
Signed-off-by: Rob Herring <robh@kernel.org>
All callers of __of_{add,remove,update}_property() and
__of_{attach,detach}_node() wrap the call with the devtree_lock
spinlock. Let's move the spinlock into the functions. This allows moving
the sysfs update functions into those functions as well.
Link: https://lore.kernel.org/r/20230801-dt-changeset-fixes-v3-6-5f0410e007dd@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The changeset code checks for a property in the deadprops list when
adding/updating a property, but of_add_property() and
of_update_property() do not. As the users of these functions are pretty
simple, they have not hit this scenario or else the property lists
would get corrupted.
With this there are 3 cases of removing a property from either deadprops
or properties lists, so add a helper to find and remove a matching
property.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230801-dt-changeset-fixes-v3-5-5f0410e007dd@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
__of_update_property() returns the existing property if there is one, but
that value is never added to the changeset. Updates work because the
existing property was also retrieved before in of_changeset_action(),
but that is racy as of_changeset_action() doesn't hold any locks. The
property could be changed before the changeset is applied.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230801-dt-changeset-fixes-v3-4-5f0410e007dd@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Several places print the changeset action with node and property
details. Refactor these into a common printing helper. The complicating
factor is some prints are debug and some are errors. Solve this with a
bit of preprocessor magic.
Some cases printed the 'cset' which was the changeset entry pointer
rather than the whole changeset itself. The changeset entry is not all that
interesting and gets obfuscated by default anyways. So just drop it.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230801-dt-changeset-fixes-v3-3-5f0410e007dd@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
commit 0f8e565109
("of/platform: Propagate firmware node by calling device_set_node()")
use of_fwnode_handle to replace of_node_get, which introduces a side
effect that the refcount is not increased. Then the out of tree
jailhouse hypervisor enable/disable test will trigger kernel dump in
of_overlay_remove, with the following sequence
"
of_changeset_revert(&overlay_changeset);
of_changeset_destroy(&overlay_changeset);
of_overlay_remove(&overlay_id);
"
So increase the refcount to avoid issues.
This patch also release the refcount when releasing amba device to avoid
refcount leakage.
Fixes: 0f8e565109 ("of/platform: Propagate firmware node by calling device_set_node()")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230821023928.3324283-2-peng.fan@oss.nxp.com
Signed-off-by: Rob Herring <robh@kernel.org>
While originally it was fine to format strings using "%pOF" while
holding devtree_lock, this now causes a deadlock. Lockdep reports:
of_get_parent from of_fwnode_get_parent+0x18/0x24
^^^^^^^^^^^^^
of_fwnode_get_parent from fwnode_count_parents+0xc/0x28
fwnode_count_parents from fwnode_full_name_string+0x18/0xac
fwnode_full_name_string from device_node_string+0x1a0/0x404
device_node_string from pointer+0x3c0/0x534
pointer from vsnprintf+0x248/0x36c
vsnprintf from vprintk_store+0x130/0x3b4
Fix this by moving the printing in __of_changeset_entry_apply() outside
the lock. As the only difference in the multiple prints is the action
name, use the existing "action_names" to refactor the prints into a
single print.
Fixes: a92eb7621b ("lib/vsprintf: Make use of fwnode API to obtain node names and separators")
Cc: stable@vger.kernel.org
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230801-dt-changeset-fixes-v3-2-5f0410e007dd@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The code calling ima_free_kexec_buffer runs long after the memblock
allocator has already been torn down, potentially resulting in a use
after free in memblock_isolate_range.
With KASAN or KFENCE, this use after free will result in a BUG
from the idle task, and a subsequent kernel panic.
Switch ima_free_kexec_buffer over to memblock_free_late to avoid
that issue.
Fixes: fee3ff99bc ("powerpc: Move arch independent ima kexec functions to drivers/of/kexec.c")
Cc: stable@kernel.org
Signed-off-by: Rik van Riel <riel@surriel.com>
Suggested-by: Mike Rappoport <rppt@kernel.org>
Link: https://lore.kernel.org/r/20230817135759.0888e5ef@imladris.surriel.com
Signed-off-by: Rob Herring <robh@kernel.org>
The declarations for of_device_{add,register,unregister} were moved into
of_platform.h, so the implementations should be moved to platform.c as
well.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230717143718.1715773-2-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
There's no reason the generic platform bus code needs to call
of_platform_register_reconfig_notifier(). The notifier can be setup
before the platform bus is. Let's move it into of_core_init() which is
called just before platform_bus_init() instead to keep more of the DT
bits in the DT code.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230717143718.1715773-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
when kmalloc() fail to allocate memory in kasprintf(), name
or full_name will be NULL, strcmp() will cause
null pointer dereference.
Fixes: 0d638a07d3 ("of: Convert to using %pOF instead of full_name")
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230727080246.519539-1-ruanjinjie@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
Since commit 241d2fb56a ("of: Make OF framebuffer device names unique"),
as spotted by Frédéric Bonnard, the historical "of-display" device is
gone: the updated logic creates "of-display.0" instead, then as many
"of-display.N" as required.
This means that offb no longer finds the expected device, which prevents
the Debian Installer from setting up its interface, at least on ppc64el.
Fix this by keeping "of-display" for the first device and "of-display.N"
for subsequent devices.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217328
Link: https://bugs.debian.org/1033058
Fixes: 241d2fb56a ("of: Make OF framebuffer device names unique")
Cc: stable@vger.kernel.org
Cc: Cyril Brulebois <cyril@debamax.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Michal Suchánek <msuchanek@suse.de>
Link: https://lore.kernel.org/r/20230710174007.2291013-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
On s390 systems (aka mainframes), it has classic channel devices for
networking and permanent storage that are currently even more common
than PCI devices. Hence it could have a fully functional s390 kernel
with CONFIG_PCI=n, then the relevant iomem mapping functions
[including ioremap(), devm_ioremap(), etc.] are not available.
In LKP error report at below on s390:
------
ld: kernel/dma/coherent.o: in function `dma_init_coherent_memory':
coherent.c:(.text+0x102): undefined reference to `memremap'
ld: coherent.c:(.text+0x226): undefined reference to `memunmap'
ld: kernel/dma/coherent.o: in function `dma_declare_coherent_memory':
coherent.c:(.text+0x8b8): undefined reference to `memunmap'
ld: kernel/dma/coherent.o: in function `dma_release_coherent_memory':
coherent.c:(.text+0x9aa): undefined reference to `memunmap'
------
In the config file, several Kconfig options are:
------
'# CONFIG_PCI is not set'
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_DMA_DECLARE_COHERENT=y
------
So, enabling OF_EARLY_FLATTREE will select DMA_DECLARE_COHERENT
and cause above building errors even though they are not needed
because CONFIG_PCI is disabled.
Here let OF_EARLY_FLATTREE depend on HAS_IOMEM so that it won't
be built to cause compiling error if PCI is unset.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306211329.ticOJCSv-lkp@intel.com/
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20230707135852.24292-9-bhe@redhat.com
Signed-off-by: Rob Herring <robh@kernel.org>
Bindings:
- Add some missing type definitions to properties
- Drop unneeded quotes and use absolute paths in bindings
- Remove redundant "binding" or "schema" in binding titles
- Add bindings for Ralink SoCs interrupt controller, QCA2066 Bluetooth,
infineon,irps5401, new NXP i.MX GPT variants, shineworld lh133k MIPI
SPI panel, Socionext Synquacer platforms, RK3588 PCIe, ST M95640
EEPROM, and FSL DCP crypto variants, and Arm Cortex-R52
DT core:
- Improve the reserved-memory range allocation to maximize contiguous
space
- Use device_set_node() helper in place of open coding
-----BEGIN PGP SIGNATURE-----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=onek
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- Add some missing type definitions to properties
- Drop unneeded quotes and use absolute paths in bindings
- Remove redundant "binding" or "schema" in binding titles
- Add bindings for Ralink SoCs interrupt controller, QCA2066
Bluetooth, infineon,irps5401, new NXP i.MX GPT variants, shineworld
lh133k MIPI SPI panel, Socionext Synquacer platforms, RK3588 PCIe,
ST M95640 EEPROM, and FSL DCP crypto variants, and Arm Cortex-R52
DT core:
- Improve the reserved-memory range allocation to maximize contiguous
space
- Use device_set_node() helper in place of open coding"
* tag 'devicetree-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (40 commits)
dt-bindings: interrupt-controller: add Ralink SoCs interrupt controller
dt-bindings: PCI: dwc: rockchip: Update for RK3588
dt-bindings: auxdisplay: holtek: Add missing type for "linux,no-autorepeat"
dt-bindings: input: mediatek,pmic-keys: Fix typo in "linux,keycodes" property name
dt-bindings: pwm: drop unneeded quotes
dt-bindings: crypto: drop unneeded quotes
dt-bindings: arm: socionext: add Synquacer platforms
dt-bindings: connector: usb: allow a single HS port
dt-bindings: bus: ti-sysc: fix typo
of: reserved_mem: Use stable allocation order
of: reserved_mem: Try to keep range allocations contiguous
dt-bindings: arm: drop unneeded quotes and use absolute /schemas path
dt-bindings: firmware: arm,scmi: drop unneeded quotes and use absolute /schemas path
dt-bindings: dvfs: drop unneeded quotes
dt-bindings: gpu: drop unneeded quotes
dt-bindings: i3c: silvaco,i3c-master: drop unneeded quotes
dt-bindings: rockchip: grf: drop unneeded quotes
dt-bindings: spmi: mtk,spmi-mtk-pmif: drop unneeded quotes
dt-bindings: Remove last usage of "binding" or "schema" in titles
dt-bindings: display: panel: mipi-dbi-spi: add spi-3wire property
...
Core GPIO library:
- remove unused symbols
- don't spam the kernel log with messages about hogs
- remove old sysfs API cruft
- improve handling of GPIO masks
New drivers
- add a driver for the BlueField-3 GPIO controller
- add GPIO support for the TPS65219 PMIC
Driver improvements:
- extend the gpio-aggregator driver to support ramp-up/ramp-down delay
- remove unnecessary CONFIG_OF guards from gpio-aggregator
- readability improvements in gpio-tangier
- switch i2c drivers back to using probe() now that it's been converted in
the i2c subsystem to not taking the id parameter
- remove unused inclusions of of_gpio.h in several drivers
- make pm ops static in gpio-davinci and fix a comment
- use more devres in drivers to shrink and simplify the code
- add missing include in gpio-sa1100
- add HAS_IOPORT KConfig dependency where needed
- add permissions checks before accessing pins in gpio-tegra186
- convert the gpio-zynq driver to using immutable irqchips
- preserve output settings set by the bootloader in gpio-mpc8xxx
Selftests:
- tweak the variable naming in script tests
Device tree updates:
- convert gpio-mmio and gpio-stmpe to YAML
- add parsing of GPIO hogs to gpio-vf610
- add bindings for the Cirrus EP93xx GPIO controller
- add gpio-line-names property to the gpio-pca9570 bindings
- extend the binding for x-powers,axp209 with another block
-----BEGIN PGP SIGNATURE-----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=3KNJ
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have two new drivers, some improvements to the core code, lots of
different updates to existing GPIO drivers and some dt-bindings on
top.
There's nothing controversial in here and almost everything has been
in next for more than a week (95% a lot longer than this). The only
thing that has spent less time in next is a new driver so no risk of
regressions.
The single merge pulls in changes that remove all usage of global GPIO
numbers from arch/arm/mach-omap.
Core GPIO library:
- remove unused symbols
- don't spam the kernel log with messages about hogs
- remove old sysfs API cruft
- improve handling of GPIO masks
New drivers:
- add a driver for the BlueField-3 GPIO controller
- add GPIO support for the TPS65219 PMIC
Driver improvements:
- extend the gpio-aggregator driver to support ramp-up/ramp-down
delay
- remove unnecessary CONFIG_OF guards from gpio-aggregator
- readability improvements in gpio-tangier
- switch i2c drivers back to using probe() now that it's been
converted in the i2c subsystem to not taking the id parameter
- remove unused inclusions of of_gpio.h in several drivers
- make pm ops static in gpio-davinci and fix a comment
- use more devres in drivers to shrink and simplify the code
- add missing include in gpio-sa1100
- add HAS_IOPORT KConfig dependency where needed
- add permissions checks before accessing pins in gpio-tegra186
- convert the gpio-zynq driver to using immutable irqchips
- preserve output settings set by the bootloader in gpio-mpc8xxx
Selftests:
- tweak the variable naming in script tests
Device tree updates:
- convert gpio-mmio and gpio-stmpe to YAML
- add parsing of GPIO hogs to gpio-vf610
- add bindings for the Cirrus EP93xx GPIO controller
- add gpio-line-names property to the gpio-pca9570 bindings
- extend the binding for x-powers,axp209 with another block"
* tag 'gpio-updates-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (58 commits)
of: unittest: drop assertions for GPIO hog messages
gpiolib: Drop unused domain_ops memeber of GPIO IRQ chip
gpio: synq: remove unused zynq_gpio_irq_reqres/zynq_gpio_irq_relres
dt-bindings: gpio: gpio-vf610: Add parsing of hogs
gpio: lpc18xx: Remove unused of_gpio.h inclusion
gpio: xra1403: Remove unused of_gpio.h inclusion
gpio: mpc8xxx: Remove unused of_gpio.h inclusion
dt-bindings: gpio: Add Cirrus EP93xx
gpio: mpc8xxx: latch GPIOs state on module load when configured as output
selftests: gpio: gpio-sim: Use same variable name for sysfs pathname
gpio: mlxbf3: Add gpio driver support
gpio: delay: Remove duplicative functionality
gpio: aggregator: Set up a parser of delay line parameters
gpio: aggregator: Support delay for setting up individual GPIOs
gpio: aggregator: Remove CONFIG_OF and of_match_ptr() protections
dt-bindings: gpio: pca9570: add gpio-line-names property
gpiolib: remove unused gpio_cansleep()
gpio: tps65219: add GPIO support for TPS65219 PMIC
gpio: zynq: fix zynqmp_gpio not an immutable chip warning
gpio: davinci: make davinci_gpio_dev_pm_ops static
...
These have now been demoted to debug and are normally hidden. Drop the
assertions entirely.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org>
sort() in Linux is based on heapsort which is not a stable sort
algorithm - equal elements are being reordered. For reserved memory in
the device tree this happens mainly for dynamic allocations: They do not
have an address to sort with, so they are reordered somewhat randomly
when adding/removing other unrelated reserved memory nodes.
Functionally this is not a big problem, but it's confusing during
development when all the addresses change after adding unrelated
reserved memory nodes.
Make the order stable by sorting dynamic allocations according to
the node order in the device tree. Static allocations are not affected
by this because they are still sorted by their (fixed) address.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230510-dt-resv-bottom-up-v2-2-aeb2afc8ac25@gerhold.net
Signed-off-by: Rob Herring <robh@kernel.org>
Right now dynamic reserved memory regions are allocated either
bottom-up or top-down, depending on the memblock setting of the
architecture. This is fine when the address is arbitrary. However,
when using "alloc-ranges" the regions are often placed somewhere
in the middle of (free) RAM, even if the range starts or ends next
to another (static) reservation.
Try to detect this situation, and choose explicitly between bottom-up
or top-down to allocate the memory close to the other reservations:
1. If the "alloc-range" starts at the end or inside an existing
reservation, use bottom-up.
2. If the "alloc-range" ends at the start or inside an existing
reservation, use top-down.
3. If both or none is the case, keep the current
(architecture-specific) behavior.
There are plenty of edge cases where only a more complex algorithm
would help, but even this simple approach helps in many cases to keep
the reserved memory (and therefore also the free memory) contiguous.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230510-dt-resv-bottom-up-v2-1-aeb2afc8ac25@gerhold.net
Signed-off-by: Rob Herring <robh@kernel.org>
Insulate of_device_alloc() and of_amba_device_create() from possible
changes to fwnode_handle implementation by using device_set_node()
instead of open-coding dev->dev.fwnode assignments.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230615145243.37095-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Rob Herring <robh@kernel.org>
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230525204812.733642-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Rob Herring <robh@kernel.org>
In init_overlay_changeset(), the variable "node" is from
of_get_child_by_name(), and the "node" should be discarded in error case.
Fixes: d1651b03c2 ("of: overlay: add overlay symbols to live device tree")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20230602020502.11693-1-hayashi.kunihiko@socionext.com
Signed-off-by: Rob Herring <robh@kernel.org>
Drivers should be silent when they work correctly. There's no reason to
emit info messages when GPIO lines are hogged. Demote the message to
debug.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Suggested-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- Add Conor Dooley as a DT binding maintainer
- Swap the order of parsing /memreserve/ and /reserved-memory nodes so
that the /reserved-memory nodes which have more information are
handled first
- Fix some property dependencies in riscv,pmu binding
- Update maintainers entries on a couple of bindings
-----BEGIN PGP SIGNATURE-----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=/lCA
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Add Conor Dooley as a DT binding maintainer
- Swap the order of parsing /memreserve/ and /reserved-memory nodes so
that the /reserved-memory nodes which have more information are
handled first
- Fix some property dependencies in riscv,pmu binding
- Update maintainers entries on a couple of bindings
* tag 'devicetree-fixes-for-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
MAINTAINERS: add Conor as a dt-bindings maintainer
dt-bindings: perf: riscv,pmu: fix property dependencies
dt-bindings: xilinx: Remove Naga from memory and mtd bindings
of: fdt: Scan /memreserve/ last
dt-bindings: clock: r9a06g032-sysctrl: Change maintainer to Fabrizio Castro
dt-bindings: pinctrl: renesas,rzv2m: Change maintainer to Fabrizio Castro
dt-bindings: pinctrl: renesas,rzn1: Change maintainer to Fabrizio Castro
dt-bindings: i2c: renesas,rzv2m: Change maintainer to Fabrizio Castro
- fix a PageHighMem check in dma-coherent initialization (Doug Berger)
- clean up the coherency defaul initialiation (Jiaxun Yang)
- add cacheline to user/kernel dma-debug space dump messages
(Desnes Nunes, Geert Uytterhoeve)
- swiotlb statistics improvements (Michael Kelley)
- misc cleanups (Petr Tesarik)
-----BEGIN PGP SIGNATURE-----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=vAit
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.4-2023-04-28' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- fix a PageHighMem check in dma-coherent initialization (Doug Berger)
- clean up the coherency defaul initialiation (Jiaxun Yang)
- add cacheline to user/kernel dma-debug space dump messages (Desnes
Nunes, Geert Uytterhoeve)
- swiotlb statistics improvements (Michael Kelley)
- misc cleanups (Petr Tesarik)
* tag 'dma-mapping-6.4-2023-04-28' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: Omit total_used and used_hiwater if !CONFIG_DEBUG_FS
swiotlb: track and report io_tlb_used high water marks in debugfs
swiotlb: fix debugfs reporting of reserved memory pools
swiotlb: relocate PageHighMem test away from rmem_swiotlb_setup
of: address: always use dma_default_coherent for default coherency
dma-mapping: provide CONFIG_ARCH_DMA_DEFAULT_COHERENT
dma-mapping: provide a fallback dma_default_coherent
dma-debug: Use %pa to format phys_addr_t
dma-debug: add cacheline to user/kernel space dump messages
dma-debug: small dma_debug_entry's comment and variable name updates
dma-direct: cleanup parameters to dma_direct_optimal_gfp_mask
* Support for runtime detection of the Svnapot extension.
* Support for Zicboz when clearing pages.
* We've moved to GENERIC_ENTRY.
* Support for !MMU on rv32 systems.
* The linear region is now mapped via huge pages.
* Support for building relocatable kernels.
* Support for the hwprobe interface.
* Various fixes and cleanups throughout the tree.
-----BEGIN PGP SIGNATURE-----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=oxQd
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.4-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for runtime detection of the Svnapot extension
- Support for Zicboz when clearing pages
- We've moved to GENERIC_ENTRY
- Support for !MMU on rv32 systems
- The linear region is now mapped via huge pages
- Support for building relocatable kernels
- Support for the hwprobe interface
- Various fixes and cleanups throughout the tree
* tag 'riscv-for-linus-6.4-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (57 commits)
RISC-V: hwprobe: Explicity check for -1 in vdso init
RISC-V: hwprobe: There can only be one first
riscv: Allow to downgrade paging mode from the command line
dt-bindings: riscv: add sv57 mmu-type
RISC-V: hwprobe: Remove __init on probe_vendor_features()
riscv: Use --emit-relocs in order to move .rela.dyn in init
riscv: Check relocations at compile time
powerpc: Move script to check relocations at compile time in scripts/
riscv: Introduce CONFIG_RELOCATABLE
riscv: Move .rela.dyn outside of init to avoid empty relocations
riscv: Prepare EFI header for relocatable kernels
riscv: Unconditionnally select KASAN_VMALLOC if KASAN
riscv: Fix ptdump when KASAN is enabled
riscv: Fix EFI stub usage of KASAN instrumented strcmp function
riscv: Move DTB_EARLY_BASE_VA to the kernel address space
riscv: Rework kasan population functions
riscv: Split early and final KASAN population functions
riscv: Use PUD/P4D/PGD pages for the linear mapping
riscv: Move the linear mapping creation in its own function
riscv: Get rid of riscv_pfn_base variable
...
Change the scanning /memreserve/ and /reserved-memory node order to fix
Kernel panic on Khadas Vim3 Board.
If /memreserve/ goes first, the memory is reserved, but nomap can't be
applied to the region. So the memory won't be used by Linux, but it is
still present in the linear map as normal memory, which allows
speculation. Legitimate access to adjacent pages will cause the CPU
to end up prefetching into them leading to Kernel panic.
So /reserved-memory node should go first, as it has a more updated
description of the memory regions and can apply flags, like nomap.
Link: https://lore.kernel.org/all/CAJX_Q+1Tjc+-TjZ6JW9X0NxEdFe=82a9626yL63j7uVD4LpxEA@mail.gmail.com/
Signed-off-by: Lucas Tanure <tanure@linux.com>
Link: https://lore.kernel.org/r/20230424113846.46382-1-tanure@linux.com
Signed-off-by: Rob Herring <robh@kernel.org>
Here is the "big" set of char/misc and other driver subsystems for
6.4-rc1.
It's pretty big, but due to the removal of pcmcia drivers, almost breaks
even for number of lines added vs. removed, a nice change.
Included in here are:
- removal of unused PCMCIA drivers (finally!)
- Interconnect driver updates and additions
- Lots of IIO driver updates and additions
- MHI driver updates
- Coresight driver updates
- NVMEM driver updates, which required some OF updates
- W1 driver updates and a new maintainer to manage the subsystem
- FPGA driver updates
- New driver subsystem, CDX, for AMD systems
- lots of other small driver updates and additions
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp5Eg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynSXgCg0kSw3vUYwpsnhAsQkoPw1QVA23sAn2edRCMa
GEkPWjrROueCom7xbLMu
=eR+P
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc drivers updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystems for
6.4-rc1.
It's pretty big, but due to the removal of pcmcia drivers, almost
breaks even for number of lines added vs. removed, a nice change.
Included in here are:
- removal of unused PCMCIA drivers (finally!)
- Interconnect driver updates and additions
- Lots of IIO driver updates and additions
- MHI driver updates
- Coresight driver updates
- NVMEM driver updates, which required some OF updates
- W1 driver updates and a new maintainer to manage the subsystem
- FPGA driver updates
- New driver subsystem, CDX, for AMD systems
- lots of other small driver updates and additions
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (196 commits)
mcb-lpc: Reallocate memory region to avoid memory overlapping
mcb-pci: Reallocate memory region to avoid memory overlapping
mcb: Return actual parsed size when reading chameleon table
kernel/configs: Drop Android config fragments
virt: acrn: Replace obsolete memalign() with posix_memalign()
spmi: Add a check for remove callback when removing a SPMI driver
spmi: fix W=1 kernel-doc warnings
spmi: mtk-pmif: Drop of_match_ptr for ID table
spmi: pmic-arb: Convert to platform remove callback returning void
spmi: mtk-pmif: Convert to platform remove callback returning void
spmi: hisi-spmi-controller: Convert to platform remove callback returning void
w1: gpio: remove unnecessary ENOMEM messages
w1: omap-hdq: remove unnecessary ENOMEM messages
w1: omap-hdq: add SPDX tag
w1: omap-hdq: allow compile testing
w1: matrox: remove unnecessary ENOMEM messages
w1: matrox: use inline over __inline__
w1: matrox: switch from asm to linux header
w1: ds2482: do not use assignment in if condition
w1: ds2482: drop unnecessary header
...
- First part of DT header detangling dropping cpu.h from of_device.h
and replacing some includes with forward declarations. A handful of
drivers needed some adjustment to their includes as a result.
- Refactor of_device.h to be used by bus drivers rather than various
device drivers. This moves non-bus related functions out of
of_device.h. The end goal is for of_platform.h and of_device.h to stop
including each other.
- Refactor open coded parsing of "ranges" in some bus drivers to use DT
address parsing functions
- Add some new address parsing functions of_property_read_reg(),
of_range_count(), and of_range_to_resource() in preparation to convert
more open coded parsing of DT addresses to use them.
- Treewide clean-ups to use of_property_read_bool() and
of_property_present() as appropriate. The ones here are the ones
that didn't get picked up elsewhere.
-----BEGIN PGP SIGNATURE-----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=89Zj
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
- First part of DT header detangling dropping cpu.h from of_device.h
and replacing some includes with forward declarations. A handful of
drivers needed some adjustment to their includes as a result.
- Refactor of_device.h to be used by bus drivers rather than various
device drivers. This moves non-bus related functions out of
of_device.h. The end goal is for of_platform.h and of_device.h to
stop including each other.
- Refactor open coded parsing of "ranges" in some bus drivers to use DT
address parsing functions
- Add some new address parsing functions of_property_read_reg(),
of_range_count(), and of_range_to_resource() in preparation to
convert more open coded parsing of DT addresses to use them.
- Treewide clean-ups to use of_property_read_bool() and
of_property_present() as appropriate. The ones here are the ones that
didn't get picked up elsewhere.
* tag 'devicetree-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (34 commits)
bus: tegra-gmi: Replace of_platform.h with explicit includes
hte: Use of_property_present() for testing DT property presence
w1: w1-gpio: Use of_property_read_bool() for boolean properties
virt: fsl: Use of_property_present() for testing DT property presence
soc: fsl: Use of_property_present() for testing DT property presence
sbus: display7seg: Use of_property_read_bool() for boolean properties
sparc: Use of_property_read_bool() for boolean properties
sparc: Use of_property_present() for testing DT property presence
bus: mvebu-mbus: Remove open coded "ranges" parsing
of/address: Add of_property_read_reg() helper
of/address: Add of_range_count() helper
of/address: Add support for 3 address cell bus
of/address: Add of_range_to_resource() helper
of: unittest: Add bus address range parsing tests
of: Drop cpu.h include from of_device.h
OPP: Adjust includes to remove of_device.h
irqchip: loongson-eiointc: Add explicit include for cpuhotplug.h
cpuidle: Adjust includes to remove of_device.h
cpufreq: sun50i: Add explicit include for cpu.h
cpufreq: Adjust includes to remove of_device.h
...
During the early page table creation, we used to set the mapping for
PAGE_OFFSET to the kernel load address: but the kernel load address is
always offseted by PMD_SIZE which makes it impossible to use PUD/P4D/PGD
pages as this physical address is not aligned on PUD/P4D/PGD size (whereas
PAGE_OFFSET is).
But actually we don't have to establish this mapping (ie set va_pa_offset)
that early in the boot process because:
- first, setup_vm installs a temporary kernel mapping and among other
things, discovers the system memory,
- then, setup_vm_final creates the final kernel mapping and takes
advantage of the discovered system memory to create the linear
mapping.
During the first phase, we don't know the start of the system memory and
then until the second phase is finished, we can't use the linear mapping at
all and phys_to_virt/virt_to_phys translations must not be used because it
would result in a different translation from the 'real' one once the final
mapping is installed.
So here we simply delay the initialization of va_pa_offset to after the
system memory discovery. But to make sure noone uses the linear mapping
before, we add some guard in the DEBUG_VIRTUAL config.
Finally we can use PUD/P4D/PGD hugepages when possible, which will result
in a better TLB utilization.
Note that:
- this does not apply to rv32 as the kernel mapping lies in the linear
mapping.
- we rely on the firmware to protect itself using PMP.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Acked-by: Rob Herring <robh@kernel.org> # DT bits
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20230324155421.271544-4-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add a helper, of_property_read_reg(), to read "reg" entries untranslated
address and size. This function is intended mainly for cases with an
untranslatable "reg" address (i.e. not MMIO). There's also a few
translatable cases such as address cells containing a bus chip-select
number.
Link: https://lore.kernel.org/r/20230328-dt-address-helpers-v1-5-e2456c3e77ab@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Some users need a count of the number of ranges entries before
iterating over the entries. Typically this is for allocating some data
structure based on the size. Add a helper, of_range_count(), to get the
count. The helper must be called with an struct of_range_parser
initialized by of_range_parser_init().
Link: https://lore.kernel.org/r/20230328-dt-address-helpers-v1-4-e2456c3e77ab@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
There's a few custom bus bindings (e.g. fsl,qoriq-mc) which use a
3 cell format with custom flags in the high cell. We can match these
buses as a fallback if we didn't match on PCI bus which is the only
standard bus binding with 3 address cells.
Link: https://lore.kernel.org/r/20230328-dt-address-helpers-v1-3-e2456c3e77ab@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
A few users need to convert a specific "ranges" entry into a struct
resource. Add a helper to similar to of_address_to_resource(). The
existing of_pci_range_to_resource() helper isn't really PCI specific,
so it can be used with the CONFIG_PCI check dropped.
Link: https://lore.kernel.org/r/20230328-dt-address-helpers-v1-2-e2456c3e77ab@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
While there are tests for "dma-ranges" helpers, "ranges" is missing any
tests. It's the same underlying code, but for completeness add a test
for "ranges" parsing iterators. This is in preparation to add some
additional "ranges" helpers.
Link: https://lore.kernel.org/r/20230328-dt-address-helpers-v1-1-e2456c3e77ab@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
drivers/of/base.c is quite long and we've accumulated a number of CPU
node functions. Let's move them to a new file, cpu.c, along with the
lone of_cpu_device_node_get() in of_device.h. Moving the declaration has
no effect yet as of.h is included by of_device.h. This serves as
preparation to disentangle the includes in of_device.h and
of_platform.h.
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20230329-dt-cpu-header-cleanups-v1-4-581e2605fe47@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
- Fix interaction between fw_devlink and DT overlays causing
devices to not be probed
- Fix the compatible string for loongson,cpu-interrupt-controller
-----BEGIN PGP SIGNATURE-----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=x2A8
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix interaction between fw_devlink and DT overlays causing devices to
not be probed
- Fix the compatible string for loongson,cpu-interrupt-controller
* tag 'devicetree-fixes-for-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
treewide: Fix probing of devices in DT overlays
dt-bindings: interrupt-controller: loongarch: Fix mismatched compatible
When loading a DT overlay that creates a device, the device is not
probed, unless the DT overlay is unloaded and reloaded again.
After the recent refactoring to improve fw_devlink, it no longer depends
on the "compatible" property to identify which device tree nodes will
become struct devices. fw_devlink now picks up dangling consumers
(consumers pointing to descendent device tree nodes of a device that
aren't converted to child devices) when a device is successfully bound
to a driver. See __fw_devlink_pickup_dangling_consumers().
However, during DT overlay, a device's device tree node can have
sub-nodes added/removed without unbinding/rebinding the driver. This
difference in behavior between the normal device instantiation and
probing flow vs. the DT overlay flow has a bunch of implications that
are pointed out elsewhere[1]. One of them is that the fw_devlink logic
to pick up dangling consumers is never exercised.
This patch solves the fw_devlink issue by marking all DT nodes added by
DT overlays with FWNODE_FLAG_NOT_DEVICE (fwnode that won't become
device), and by clearing the flag when a struct device is actually
created for the DT node. This way, fw_devlink knows not to have
consumers waiting on these newly added DT nodes, and to propagate the
dependency to an ancestor DT node that has the corresponding struct
device.
Based on a patch by Saravana Kannan, which covered only platform and spi
devices.
[1] https://lore.kernel.org/r/CAGETcx_bkuFaLCiPrAWCPQz+w79ccDp6=9e881qmK=vx3hBMyg@mail.gmail.com
Fixes: 4a032827da ("of: property: Simplify of_link_to_phandle()")
Link: https://lore.kernel.org/r/CAGETcx_+rhHvaC_HJXGrr5_WAd2+k5f=rWYnkCZ6z5bGX-wj4w@mail.gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Saravana Kannan <saravanak@google.com>
Tested-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Link: https://lore.kernel.org/r/e1fa546682ea4c8474ff997ab6244c5e11b6f8bc.1680182615.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
Sparc is the only place devtree_lock is used outside of drivers/of/.
Move the devtree_lock declaration into of_private.h and Sparc's prom.h
so pulling in spinlock.h to of.h can be avoided for everything besides
Sparc.
Link: https://lore.kernel.org/r/20230329-dt-cpu-header-cleanups-v1-1-581e2605fe47@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
As for now all arches have dma_default_coherent reflecting default
DMA coherency for of devices, so there is no need to have a standalone
config option.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Christoph Hellwig <hch@lst.de>
A new helper has been introduced, of_request_module(). Users have been
converted, this helper can now be deleted.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230404172148.82422-13-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
