The function does not follow the pattern where the underscores would be
justified, so rename it.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function does not follow the pattern where the underscores would be
justified, so rename it.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Previous patch freed the function name btrfs_submit_bio() so we can use
it for a helper that submits struct bio.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function name is a bit misleading as it submits the btrfs_bio
(bbio), rename it so we can use btrfs_submit_bio() when an actual bio is
submitted.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The member btrfs_fs_info::subpage_info stores the cached bitmap start
position inside the merged bitmap.
However in reality there is only one thing depending on the sectorsize,
bitmap_nr_bits, which records the number of sectors that fit inside a
page.
The sequence of sub-bitmaps have fixed order, thus it's just a quick
multiplication to calculate the start position of each sub-bitmaps.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The parameter @nr_ret is used to tell the caller how many sectors have
been submitted for IO.
Then callers check @nr_ret value to determine if we need to manually
clear the PAGECACHE_TAG_DIRTY, as if we submitted no sector (e.g. all
sectors are beyond i_size) there is no folio_start_writeback() called thus
PAGECACHE_TAG_DIRTY tag will not be cleared.
Remove this parameter by:
- Moving the btrfs_folio_clear_writeback() call into
__extent_writepage_io()
So that if we didn't submit any IO, then manually call
btrfs_folio_set_writeback() to clear PAGECACHE_TAG_DIRTY when
the page is no longer dirty.
- Use a bool to record if we have submitted any sector
Instead of an int.
- Use subpage compatible helpers to end folio writeback.
This brings no change to the behavior, just for the sake of consistency.
As for the call site inside __extent_writepage(), we're always called
for the whole page, so the existing full page helper
folio_(start|end)_writeback() is totally fine.
For the call site inside extent_write_locked_range(), although we can
have subpage range, folio_start_writeback() will only clear
PAGECACHE_TAG_DIRTY if the page is no longer dirty, and the full folio
will still be dirty if there is any subpage dirty range.
Only when the last dirty subpage sector is cleared, the
folio_start_writeback() will clear PAGECACHE_TAG_DIRTY.
So no matter if we call the full page or subpage helper, the result
is still the same, then just use the subpage helpers for consistency.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix a few obvious grammar mistakes: a -> an, then -> than.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use xarray to track dirty extents to reduce the size of the struct
btrfs_qgroup_extent_record from 64 bytes to 40 bytes. The xarray is
more cache line friendly, it also reduces the complexity of insertion
and search code compared to rb tree.
Another change introduced is about error handling. Before this patch,
the result of btrfs_qgroup_trace_extent_nolock() is always a success. In
this patch, because of this function calls the function xa_store() which
has the possibility to fail, so mark qgroup as inconsistent if error
happened and then free preallocated memory. Also we preallocate memory
before spin_lock(), if memory preallcation failed, error handling is the
same the existing code.
Suggested-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Junchao Sun <sunjunchao2870@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Clean up resources using goto to get rid of repeated code.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Junchao Sun <sunjunchao2870@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Unlike the bitmap usage inside raid56, for __extent_writepage_io() we
handle the subpage submission not sector-by-sector, but for each dirty
range we found.
This is not a big deal normally, as the subpage complex code is already
mostly optimized out by the compiler for x86_64.
However for the sake of consistency and for the future of subpage
sector-perfect compression support, this patch does:
- Extract the sector submission code into submit_one_sector()
- Add the needed code to extract the dirty bitmap for subpage case
There is a small pitfall for non-subpage case, as we cleared page
dirty before starting writeback, so we have to manually set
the default dirty_bitmap to 1 for such case.
- Use bitmap_and() to calculate the target sectors we need to submit
This is done for both subpage and non-subpage cases, and will later
be expanded to skip inline/compression ranges.
For x86_64, the dirty bitmap will be fixed to 1, with the length of 1,
so we're still doing the same workload per sector.
For larger page sizes, the overhead will be a little larger, as previous
we only need to do one extent_map lookup per-dirty-range, but now it
will be one extent_map lookup per-sector.
But that is the same frequency as x86_64, so we're just aligning the
behavior to x86_64.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In commit 75258f20fb ("btrfs: subpage: dump extra subpage bitmaps for
debug") an internal macro GET_SUBPAGE_BITMAP() is introduced to grab the
bitmap of each attribute.
But that commit is using bitmap_cut() which will do the left shift of
the larger bitmap, causing incorrect values.
Thankfully this bitmap_cut() is only called for debug usage, and so far
it's not yet causing problem.
Fix it to use bitmap_read() to only grab the desired sub-bitmap.
Fixes: 75258f20fb ("btrfs: subpage: dump extra subpage bitmaps for debug")
CC: stable@vger.kernel.org # 6.6+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we're calling btrfs_num_copies() before btrfs_get_chunk_map() in
btrfs_map_block(). But btrfs_num_copies() itself does a chunk map lookup
to be able to calculate the number of copies.
So split out the code getting the number of copies from btrfs_num_copies()
into a helper called btrfs_chunk_map_num_copies() and directly call it
from btrfs_map_block() and btrfs_num_copies().
This saves us one rbtree lookup per btrfs_map_block() invocation.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The BTRFS_IOC_SYNC ioctl wants to wake up the cleaner kthread so that it
does any pending work (subvolume deletion, delayed iputs, etc), however
it is waking up the transaction kthread, which in turn wakes up the
cleaner. Since we don't have any transaction to commit, as any ongoing
transaction was already committed when it called btrfs_sync_fs() and
the goal is just to wake up the cleaner thread, directly wake up the
cleaner instead of the transaction kthread.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Btrfs only supports sectorsize 4K, 8K, 16K, 32K, 64K for now, thus for
systems with 4K page size, there is no way the fs is subpage (sectorsize
< PAGE_SIZE).
So here we define btrfs_is_subpage() different according to the
PAGE_SIZE:
- PAGE_SIZE > 4K
We may hit real subpage cases, define btrfs_is_subpage() as a regular
function and do the usual checks.
- PAGE_SIZE == 4K (no smaller PAGE_SIZE support AFAIK)
There is no way the fs is subpage, so just define btrfs_is_subpage()
as an inline function which always return false.
This saves about 7K bytes for x86_64 debug builds:
text data bss dec hex filename
Before: 1484452 168693 25776 1678921 199e49 fs/btrfs/btrfs.ko
After: 1476605 168445 25776 1670826 197eaa fs/btrfs/btrfs.ko
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that RAID stripe-tree lookup failures are not treated as a fatal issue
any more, change the RAID stripe-tree lookup error message to debug level.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Set rst_search_commit_root in the btrfs_io_stripe we're passing to
btrfs_map_block() in case we're doing data relocation.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Rename 'btrfs_io_stripe::is_scrub' to 'rst_search_commit_root'. While
'is_scrub' describes the state of the io_stripe (it is a stripe submitted
by scrub) it does not describe the purpose, namely looking at the commit
root when searching RAID stripe-tree entries.
Renaming the stripe to rst_search_commit_root describes this purpose.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This just creates unnecessary noise and doesn't provide any insights into
debugging RAID stripe-tree related issues.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a comment to document the complicated locked_page unlock logic in
cow_file_range_inline. The specifically tricky part is that a caller
just up the stack converts ret == 0 to ret == 1 and then another
caller far up the callstack handles ret == 1 as a success, AND returns
without cleanup in that case, both of which "feel" unnatural and led to
the original bug.
Try to document that somewhat specific callstack logic here to explain
the weird un-setting of locked_folio on success.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
When iterating the chunk maps when a device replace finishes we are doing
a full rbtree search for each chunk map, which is not the most efficient
thing to do, wasting CPU time. As we are holding a write lock on the tree
during the whole iteration, we can simply start from the first node in the
tree and then move to the next chunk map by doing a rb_next() call - the
only exception is when we need to reschedule, in which case we have to do
a full rbtree search since we dropped the write lock and the tree may have
changed (chunk maps may have been removed and the tree got rebalanced).
So just do that.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At the end of a device replace we must go over all the chunk maps and
update their stripes to point to the target device instead of the source
device. We iterate over the chunk maps while holding a write lock and
we never reschedule, which can result in monopolizing a CPU for too long
and blocking readers for too long (it's a rw lock, non-blocking).
So improve on this by rescheduling if necessary. This is safe because at
this point we are holding the chunk mutex, which means no new chunks can
be allocated and therefore we don't risk missing a new chunk map that
covers a range behind the last one we processed before rescheduling.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of getting a page and using that to clear dirty for io, use the
folio helper and use the appropriate folio functions.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We only use a page to copy in the data for the inline extent. Use a
folio for this instead.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We already use a lot of functions here that use folios, update the
function to use __filemap_get_folio instead of find_get_page and then
use the folio directly.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently this already uses a folio for most things, update it to take a
folio and update all the page usage with the corresponding folio usage.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We already use a folio some in this function, replace all page usage
with the folio and update the function to take the folio as an argument.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that btrfs_get_extent takes a folio, update __get_extent_map to
take a folio as well.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We only pass this into read_inline_extent, change it to take a folio and
update the callers.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of using a page, use a folio instead, take a folio as an
argument, and update the callers appropriately.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Update uncompress_inline to take a folio and update it's usage
accordingly.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now the fixup creator and consumer use folios, change this to use a
folio as well.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of a page, use a folio for btrfs_writepage_cow_fixup. We
already have a folio at the only caller, and the fixup worker uses
folios.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function heavily messes with pages, instead update it to use a
folio.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This mostly uses folios already, update it to take a folio and update
the rest of the function to use the folio instead of the page.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of passing in the page for ->locked_page, make it hold a
locked_folio and then update the users of async_chunk to act
accordingly.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that every function that btrfs_run_delalloc_range calls takes a
folio, update it to take a folio and update the callers.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This just passes the page into the compressed machinery to keep track of
the locked page. Update this to take a folio and convert it to a page
where appropriate.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that btrfs_cleanup_ordered_extents is operating mostly with folios,
update it to use a folio instead of a page, and the update the function
and the callers as appropriate.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We walk through pages in this function and clear ordered, and the
function for this uses folios. Update the function to use a folio for
this whole operation.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now all of the functions that use locked_page in run_delalloc_nocow take
a folio, update it to take a folio and update the caller.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With this we can pass the folio directly into cow_file_range().
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Convert this to take a folio and pass it into all of the various cleanup
functions. Update the callers to pass in a folio instead.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we want the folio in this function, convert it to take a folio
directly and use that.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We pass the folio into extent_write_locked_range, go ahead and take a
folio to pass along, and update the callers to pass in a folio.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This mostly uses folios, convert it to take a folio instead and update
the callers to pass in the folio.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of taking the locked page, take the locked folio so we can pass
that into __process_folios_contig.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that this mostly uses folios, update it to take folios, use the
folios that are passed in, and rename from process_one_page =>
process_one_folio.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This operates mostly on folios, update it to take a folio for the locked
folio instead of the page, rename from __process_pages_contig =>
__process_folios_contig.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All of the callers have a folio at this point, update
__unlock_for_delalloc to take a folio so that it's consistent with its
callers.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
