Currently, in the window between the check for the accessed bit, and actually
dropping the spte, a vcpu can access the page through the spte and set the bit,
which will be ignored by the mmu.
Fix by using an exchange operation to atmoically fetch the spte and drop it.
Signed-off-by: Avi Kivity <avi@redhat.com>
When we call rmap_remove(), we (almost) always immediately follow it by
an __set_spte() to a nonpresent pte. Since we need to perform the two
operations atomically, to avoid losing the dirty and accessed bits, introduce
a helper drop_spte() and convert all call sites.
The operation is still nonatomic at this point.
Signed-off-by: Avi Kivity <avi@redhat.com>
Commit 341d9b535b6c simplify reload logic while entry guest mode, it
can avoid unnecessary sync-root if KVM_REQ_MMU_RELOAD and
KVM_REQ_MMU_SYNC both set.
But, it cause a issue that when we handle 'KVM_REQ_TLB_FLUSH', the
root is invalid, it is triggered during my test:
Kernel BUG at ffffffffa00212b8 [verbose debug info unavailable]
......
Fixed by directly return if the root is not ready.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch converts unnecessary divide and modulo operations
in the KVM large page related code into logical operations.
This allows to convert gfn_t to u64 while not breaking 32
bit builds.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Cleanup this function that we are already get the direct sp's access
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
If the mapping is writable but the dirty flag is not set, we will find
the read-only direct sp and setup the mapping, then if the write #PF
occur, we will mark this mapping writable in the read-only direct sp,
now, other real read-only mapping will happily write it without #PF.
It may hurt guest's COW
Fixed by re-install the mapping when write #PF occur.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
In no-direct mapping, we mark sp is 'direct' when we mapping the
guest's larger page, but its access is encoded form upper page-struct
entire not include the last mapping, it will cause access conflict.
For example, have this mapping:
[W]
/ PDE1 -> |---|
P[W] | | LPA
\ PDE2 -> |---|
[R]
P have two children, PDE1 and PDE2, both PDE1 and PDE2 mapping the
same lage page(LPA). The P's access is WR, PDE1's access is WR,
PDE2's access is RO(just consider read-write permissions here)
When guest access PDE1, we will create a direct sp for LPA, the sp's
access is from P, is W, then we will mark the ptes is W in this sp.
Then, guest access PDE2, we will find LPA's shadow page, is the same as
PDE's, and mark the ptes is RO.
So, if guest access PDE1, the incorrect #PF is occured.
Fixed by encode the last mapping access into direct shadow page
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
While we sync many unsync sp at one time(in mmu_sync_children()),
we may mapping the spte writable, it's dangerous, if one unsync
sp's mapping gfn is another unsync page's gfn.
For example:
SP1.pte[0] = P
SP2.gfn's pfn = P
[SP1.pte[0] = SP2.gfn's pfn]
First, we write protected SP1 and SP2, but SP1 and SP2 are still the
unsync sp.
Then, sync SP1 first, it will detect SP1.pte[0].gfn only has one unsync-sp,
that is SP2, so it will mapping it writable, but we plan to sync SP2 soon,
at this point, the SP2->unsync is not reliable since later we sync SP2 but
SP2->gfn is already writable.
So the final result is: SP2 is the sync page but SP2.gfn is writable.
This bug will corrupt guest's page table, fixed by mark read-only mapping
if the mapped gfn has shadow pages.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Some guest device driver may leverage the "Non-Snoop" I/O, and explicitly
WBINVD or CLFLUSH to a RAM space. Since migration may occur before WBINVD or
CLFLUSH, we need to maintain data consistency either by:
1: flushing cache (wbinvd) when the guest is scheduled out if there is no
wbinvd exit, or
2: execute wbinvd on all dirty physical CPUs when guest wbinvd exits.
Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
No need to reload the mmu in between two different vcpu->requests checks.
kvm_mmu_reload() may trigger KVM_REQ_TRIPLE_FAULT, but that will be caught
during atomic guest entry later.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Older versions of 32-bit linux have a "Checking 'hlt' instruction"
test where they repeatedly call the 'hlt' instruction, and then
expect a timer interrupt to kick the CPU out of halt. This happens
before any LAPIC or IOAPIC setup happens, which means that all of
the APIC's are in virtual wire mode at this point. Unfortunately,
the current implementation of virtual wire mode is hardcoded to
only kick the BSP, so if a crash+kexec occurs on a different
vcpu, it will never get kicked.
This patch makes pic_unlock() do the equivalent of
kvm_irq_delivery_to_apic() for the IOAPIC code. That is, it runs
through all of the vcpus looking for one that is in virtual wire
mode. In the normal case where LAPICs and IOAPICs are configured,
this won't be used at all. In the bootstrap phase of a modern
OS, before the LAPICs and IOAPICs are configured, this will have
exactly the same behavior as today; VCPU0 is always looked at
first, so it will always get out of the loop after the first
iteration. This will only go through the loop more than once
during a kexec/kdump, in which case it will only do it a few times
until the kexec'ed kernel programs the LAPIC and IOAPIC.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Enable Intel(R) Advanced Vector Extension(AVX) for guest.
The detection of AVX feature includes OSXSAVE bit testing. When OSXSAVE bit is
not set, even if AVX is supported, the AVX instruction would result in UD as
well. So we're safe to expose AVX bits to guest directly.
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If a process with a memory slot is COWed, the page will change its address
(despite having an elevated reference count). This breaks internal memory
slots which have their physical addresses loaded into vmcs registers (see
the APIC access memory slot).
Signed-off-by: Avi Kivity <avi@redhat.com>
Part of the i8259 code pretends it isn't part of kvm, but we know better.
Reduce excessive abstraction, eliminating callbacks and void pointers.
Signed-off-by: Avi Kivity <avi@redhat.com>
As advertised in feature-removal-schedule.txt. Equivalent support is provided
by overlapping memory regions.
Signed-off-by: Avi Kivity <avi@redhat.com>
Instead of three temporary variables and three free calls, have one temporary
variable (with four names) and one free call.
Signed-off-by: Avi Kivity <avi@redhat.com>
Group 3 instruction with ModRM reg field as 001 is
defined as test instruction under AMD arch, and
emulate_grp3() is ready for emulate it, so fix the
decoding.
static inline int emulate_grp3(...)
{
...
switch (c->modrm_reg) {
case 0 ... 1: /* test */
emulate_2op_SrcV("test", c->src, c->dst, ctxt->eflags);
...
}
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If the guest wants to accept timer interrupts on a CPU other
than the BSP, we need to remove this gate.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
We really want to "kvm_set_irq" during the hrtimer callback,
but that is risky because that is during interrupt context.
Instead, offload the work to a workqueue, which is a bit safer
and should provide most of the same functionality.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
emulate pusha instruction only writeback the last
EDI register, but the other registers which need
to be writeback is ignored. This patch fixed it.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Fix a slight error with assertion in local APIC code.
Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
While we mark the parent's unsync_child_bitmap, if the parent is already
unsynced, it no need walk it's parent, it can reduce some unnecessary
workload
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
In current code, some page's unsync_child_bitmap is not cleared completely
in mmu_sync_children(), for example, if two PDPEs shard one PDT, one of
PDPE's unsync_child_bitmap is not cleared.
Currently, it not harm anything just little overload, but it's the prepare
work for the later patch
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
If the sync-sp just sync transient, don't mark its pte notrap
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The sync page is already write protected in mmu_sync_children(), don't
write protected it again
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Rename 'page' and 'shadow_page' to 'sp' to better fit the context
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
On Intel, we call skip_emulated_instruction() even if we injected a #GP,
resulting in the #GP pointing at the wrong address.
Fix by injecting the exception and skipping the instruction at the same place,
so we can do just one or the other.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
On Intel, we call skip_emulated_instruction() even if we injected a #GP,
resulting in the #GP pointing at the wrong address.
Fix by injecting the exception and skipping the instruction at the same place,
so we can do just one or the other.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
On Intel, we call skip_emulated_instruction() even if we injected a #GP,
resulting in the #GP pointing at the wrong address.
Fix by injecting the exception and skipping the instruction at the same place,
so we can do just one or the other.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch enable guest to use XSAVE/XRSTOR instructions.
We assume that host_xcr0 would use all possible bits that OS supported.
And we loaded xcr0 in the same way we handled fpu - do it as late as we can.
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
delay local tlb flush until enter guest moden, it can reduce vpid flush
frequency and reduce remote tlb flush IPI(if KVM_REQ_TLB_FLUSH bit is
already set, IPI is not sent)
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Use kvm_mmu_flush_tlb() function instead of calling
kvm_x86_ops->tlb_flush(vcpu) directly.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This remote tlb flush is no necessary since we have synced while
sp is zapped
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The name "pid_sync_vcpu_all" isn't appropriate since it just affect
a single vpid, so rename it to vpid_sync_vcpu_single().
Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Using kvm_mmu_prepare_zap_page() and kvm_mmu_zap_page() instead of
kvm_mmu_zap_page() that can reduce remote tlb flush IPI
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
In the later patch, we will modify sp's zapping way like below:
kvm_mmu_prepare_zap_page A
kvm_mmu_prepare_zap_page B
kvm_mmu_prepare_zap_page C
....
kvm_mmu_commit_zap_page
[ zaped multiple sps only need to call kvm_mmu_commit_zap_page once ]
In __kvm_mmu_free_some_pages() function, the free page number is
getted form 'vcpu->kvm->arch.n_free_mmu_pages' in loop, it will
hinders us to apply kvm_mmu_prepare_zap_page() and kvm_mmu_commit_zap_page()
since kvm_mmu_prepare_zap_page() not free sp.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
