Make similar OF and ID table to extend support for ID match using
i2c_match_data(). Currently it works only for OF match tables as the
driver_data is wrong for ID match.
While at it, drop blank lines before MODULE_DEVICE_TABLE* and remove
trailing comma in the terminator entry for OF/ID table.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230903154257.70800-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make similar OF and ID table to extend support for ID match using
i2c_match_data(). Currently it works only for OF match tables as the
driver_data is wrong for ID match.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230826173841.91807-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert enum->pointer for data in the match tables, so that the hw
differences can be stored in pointer and there by simpily the code.
Add struct ltc3589_info for hw differences between the devices and replace
ltc3589_variant->ltc3589_info for data in the match table. Simplify the
probe() by replacing of_device_get_match_data() and ID lookup for
retrieving data by i2c_get_match_data(). Drop enum ltc3589_variant and
variant from struct ltc3589_info as there are no users.
While at it, dropped trailing comma in the terminator entries for ID
table.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230828162830.97881-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make similar OF and ID table to extend support for ID match using
i2c_match_data(). Currently it works only for OF match tables as the
driver_data is wrong for ID match.
While at it, drop trailing comma in the terminator entry from ID
table.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230828165447.106058-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify probe() by replacing of_device_get_match_data() and ID lookup for
retrieving match data by i2c_get_match_data().
While at it, use dev_fwnode() API instead of 'client->dev.of_node'.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230828164746.102992-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace pv88080_types->pv88080_compatible_regmap in OF/ID tables and
simplify the probe() by replacing of_match_node() and ID lookup for
retrieving match data by i2c_get_match_data(). After this there is
no user of enum pv88080_types. So drop it.
While at it, move OF table near to the user.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230903164832.83077-3-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Drop of_match_ptr() from pv88080_regulator_driver and get rid of ugly
CONFIG_OF ifdeffery. This slightly increases the size of pv88080_dt_ids
on non-OF system and shouldn't be an issue.
Add mod_devicetable.h include.
While at it, remove trailing comma in the terminator entry for OF/ID
table.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230903164832.83077-2-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A couple of fixes that came in during the merge window, both driver
specific - one for a bug that came up in testing, one for a bug due to a
misreading of the datasheet.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmT5wtcACgkQJNaLcl1U
h9D42Qf+LB9UYFJKAXPyLkpQYGHKbSaqz6hIMFWjmpsVjvuahI63wVRv/GoPZDIU
B1Zy8mrC4t37BK/CmjlwvxVFPuY+DaYTTBjjnSEnfrDsQZ+PgfIRmfqzxp/q6TYr
cpDOg/HrLkvfzNoTVtnUDz4Kn1l66OAMWXlwZ/AZEW8uD/JY172H7tBfjqDdzDvc
NCxKW0FO/pX07kc1IFaPl6UvZRqJLQUkYl7dKFl7PrG6Lzh1+FKQSUmtZY33Ndgd
LqFux/mc3jsV5E6Y0F899Lf1890VxzYHpbwT1QrHdaXhbqoACrQoaFfLfvd5YQLY
K9ncwzj8hNM87t0LYLH09lSsH5L2Xw==
=UyE6
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.6-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of fixes that came in during the merge window, both driver
specific - one for a bug that came up in testing, one for a bug due
to a misreading of the datasheet"
* tag 'regulator-fix-v6.6-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: tps6594-regulator: Fix random kernel crash
regulator: tps6287x: Fix n_voltages
Random kernel crash detected in TI CICD when regulator driver is added.
This is root caused to irq index increment being done twice causing
irq_data being allocated outside of the range.
- Rework tps6594_request_reg_irqs with correct index increment
- Adjust irq_data kmalloc size to the exact size needed for the device
This has been reported on TI mainline. No public bug report associated.
Reported-by: Udit Kumar <u-kumar1@ti.com>
Fixes: f17ccc5deb ("regulator: tps6594-regulator: Add driver for TI TPS6594 regulators")
Signed-off-by: Jerome Neanne <jneanne@baylibre.com>
Link: https://lore.kernel.org/r/20230828-tps6594_random_boot_crash_fix-v1-1-f29cbf9ddb37@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are 256 possible voltage settings for each range, not 256 possible
voltage settings in total.
Fixes: 15a1cd245d ("regulator: tps6287x: Fix missing .n_voltages setting")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com
Link: https://lore.kernel.org/r/20230829-tps-voltages-v1-1-7ba4f958a194@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org
Other tha new device support and some minor fixes this has been a really
quiet release, the only notable things are the new drivers. There's a
couple of MFDs among the new devices so the generic parts are pulled in:
- Support for Analog Devices MAX77831/57/59, Awinc AW37503, Qualcom
PMX75 and RFGEN, RealTek RT5733, RichTek RTQ2208 and Texas
Instruments TPS65086.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmTp6U4ACgkQJNaLcl1U
h9Cu4gf/RZZirDVcISmKrIYn95Dc838pHFe3tIK9Ehbwms/pzBWBzT0Eiy36g4Vd
1pUB6YJKJZIKLOfFAjmudGtT9C3Yrui+3cR3dPtxN793ixfCkT2RVdeaNJDCJ6xo
cPpAekMroDpMSczDvsTaqJzCXb4y+rjsAQ201w+WhegkSLk/yMsW7Y+a6wpaMjwt
qGD/+EDk/54aogPhrGvKq7uLwCgDo2A6HrU2rIIMHYnZuPaSjsPGcd0fZahlP7Mk
1b6/SSJ+KvN0XSAgBz4yFixECb0OG9p5ukpV17hwDAPBbNqLRp+O/o3LFLq+nsoY
yG3RpJQM6r3Bw3KqdxWF/e5sUNkEsQ==
=ZB93
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"Other than new device support and some minor fixes this has been a
really quiet release, the only notable things are the new drivers.
There's a couple of MFDs among the new devices so the generic parts
are pulled in:
- Support for Analog Devices MAX77831/57/59, Awinc AW37503, Qualcom
PMX75 and RFGEN, RealTek RT5733, RichTek RTQ2208 and Texas
Instruments TPS65086"
* tag 'regulator-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (68 commits)
regulator: userspace-consumer: Drop event support for this cycle
regulator: aw37503: Switch back to use struct i2c_driver's .probe()
dt-bindings: regulator: qcom,rpmh-regulator: allow i, j, l, m & n as RPMh resource name suffix
regulator: dt-bindings: Add Awinic AW37503
regulator: aw37503: add regulator driver for Awinic AW37503
regulator: tps65086: Select dedicated regulator config for chip variant
mfd: tps65086: Read DEVICE ID register 1 from device
regulator: raa215300: Update help description
regulator: raa215300: Add missing blank space
regulator: raa215300: Change rate from 32000->32768
regulator: db8500-prcmu: Remove unused declaration power_state_active_is_enabled()
regulator: raa215300: Add const definition
regulator: raa215300: Fix resource leak in case of error
regulator: rtq2208: Switch back to use struct i2c_driver's .probe()
regulator: lp872x: Fix Wvoid-pointer-to-enum-cast warning
regulator: max77857: Fix Wvoid-pointer-to-enum-cast warning
regulator: ltc3589: Fix Wvoid-pointer-to-enum-cast warning
regulator: qcom_rpm-regulator: Use devm_kmemdup to replace devm_kmalloc + memcpy
regulator: tps6286x-regulator: Remove redundant of_match_ptr() macros
regulator: pfuze100-regulator: Remove redundant of_match_ptr() macro
...
Drop commit 22475bcc20 ("regulator: userspace-consumer: Add regulator
event support") since Zev Weiss points out that it leaks the constants
we use for notifications out as ABI which isn't ideal, we should have
something more abstracted there. There's a definite need for this
feature but it needs some more work on the interface.
Signed-off-by: Mark Brown <broonie@kernel.org
Link: https://lore.kernel.org/r/20230824-regulator-remove-status-sysfs-v1-1-554956e8c1ca@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org
struct i2c_driver::probe_new is about to go away. Switch the driver to
use the probe callback with the same prototype.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de
Link: https://lore.kernel.org/r/20230824195617.8888-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org
Merge series from like@awinic.com:
Add regulator driver for the device Awinic AW37503 which is
single inductor - dual output power supply device. AW37503
device is designed to support general positive/negative
driven applications like TFT display panels.
Add regulator driver for the device Awinic AW37503 which is single
inductor - dual output power supply device. AW37503 device is
designed to support general positive/negative driven applications
like TFT display panels.
AW37503 regulator driver supports to enable/disable and set voltage
on its output.
Signed-off-by: Alec Li <like@awinic.com>
Link: https://lore.kernel.org/r/20230821035355.1269976-2-like@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some configurations differ between chip variants, e,g. the register
to control the on of state of LDOA1 and SWB2. Thus, it is necessary
to choose the correct configuration for a dedicated device.
If the wrong configuration was used, the LDOA1 output that was
disabled by the bootloader was enabled in Kernel again.
Each chip variant gets its dedicated configuration selected by
the chip ID previously collected from MFD probe function.
The VTT enum value (tps65086_regulators) is shifted because not all
chip variants have a separate SWB2 switch. Sometimes they are merged.
So the configuration possibilities differ, thus the regulator
configuration arrays have a different length.
Signed-off-by: Andre Werner <andre.werner@systec-electronic.com>
Link: https://lore.kernel.org/r/20230818083721.29790-5-andre.werner@systec-electronic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add const definition to the initialized local variable name to avoid
overriding. Also the second parameter in strscpy is const char * instead of
char *.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230816135550.146657-3-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The clk_register_clkdev() allocates memory by calling vclkdev_alloc() and
this memory is not freed in the error path. Similarly, resources allocated
by clk_register_fixed_rate() are not freed in the error path.
Fix these issues by using devm_clk_hw_register_fixed_rate() and
devm_clk_hw_register_clkdev().
After this, the static variable clk is not needed. Replace it with
local variable hw in probe() and drop calling clk_unregister_fixed_rate()
from raa215300_rtc_unregister_device().
Fixes: 7bce166308 ("regulator: Add Renesas PMIC RAA215300 driver")
Cc: stable@kernel.org
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230816135550.146657-2-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
struct i2c_driver::probe_new is about to go away. Switch the driver to
use the probe callback with the same prototype.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230814210759.26395-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
'id' is an enum, thus cast of pointer on 64-bit compile test with W=1
causes:
lp872x.c:867:5: error: cast to smaller integer type 'enum lp872x_regulator_id' from 'void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230810111914.204847-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
'id' is an enum, thus cast of pointer on 64-bit compile test with W=1
causes:
max77857-regulator.c:56:24: error: cast to smaller integer type 'enum max77857_id' from 'void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230810111914.204847-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
'variant' is an enum, thus cast of pointer on 64-bit compile test with
W=1 causes:
ltc3589.c:394:22: error: cast to smaller integer type 'enum ltc3589_variant' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230810111914.204847-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the helper function devm_kmemdup() rather than duplicating its
implementation, which helps to enhance code readability.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Link: https://lore.kernel.org/r/20230810114858.2103928-1-lizetao1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the driver tps6286x-regulator depends on CONFIG_OF,
it makes no difference to wrap of_match_ptr() here.
Remove of_match_ptr() macros to clean it up.
Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com>
Link: https://lore.kernel.org/r/20230809100428.2669817-8-chenjiahao16@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the driver pfuze100-regulator depends on CONFIG_OF,
it makes no difference to wrap of_match_ptr() here.
Remove the of_match_ptr() macro to clean it up.
Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com>
Link: https://lore.kernel.org/r/20230809100428.2669817-7-chenjiahao16@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the driver mpq7920 depends on CONFIG_OF,
it makes no difference to wrap of_match_ptr() here.
Remove the of_match_ptr() macro to clean it up.
Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com>
Link: https://lore.kernel.org/r/20230809100428.2669817-6-chenjiahao16@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the driver mcp16502 depends on CONFIG_OF,
it makes no difference to wrap of_match_ptr() here.
Remove of_match_ptr() macros to clean it up.
Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com>
Link: https://lore.kernel.org/r/20230809100428.2669817-5-chenjiahao16@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the driver hi6421-regulator depends on CONFIG_OF,
it makes no difference to wrap of_match_ptr() here.
Remove of_match_ptr() macros to clean it up.
Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com>
Link: https://lore.kernel.org/r/20230809100428.2669817-4-chenjiahao16@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the driver lp87565-regulator depends on CONFIG_OF,
it makes no difference to wrap of_match_ptr() here.
Remove of_match_ptr() macros to clean it up.
Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com>
Link: https://lore.kernel.org/r/20230809100428.2669817-3-chenjiahao16@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the driver da9121-regulator depends on CONFIG_OF,
it makes no difference to wrap of_match_ptr() here.
Remove of_match_ptr() macros to clean it up.
Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com>
Link: https://lore.kernel.org/r/20230809100428.2669817-2-chenjiahao16@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The bd71815 regulator driver includes the legacy header
<linux/gpio.h> for no reason, it is already using the proper
<linux/gpio/consumer.h> include. Drop the include.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230808-descriptors-regulator-v1-11-939b5e84dd18@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The bd71828 includes the legacy header <linux/gpio.h> for no
reason, drop the include. The documentation mentions GPIO but there
is no usage of the GPIO namespace.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230808-descriptors-regulator-v1-10-939b5e84dd18@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The max20086 regulator driver includes the legacy header
<linux/gpio.h> for no reason, it is already using the proper
<linux/gpio/consumer.h> include. Drop the include.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230808-descriptors-regulator-v1-8-939b5e84dd18@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The mcp16502 regulator driver includes the legacy header
<linux/gpio.h> for no reason, it is already using the proper
<linux/gpio/consumer.h> include. Drop the include.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230808-descriptors-regulator-v1-7-939b5e84dd18@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The RPI panel regulator driver includes the legacy header
<linux/gpio.h> for no reason, this is a driver and <linux/gpio/driver.h>
is already included. Drop the include.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230808-descriptors-regulator-v1-3-939b5e84dd18@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver depends on CONFIG_OF, so it is not necessary to use
of_match_ptr() here, and __maybe_unused can also be removed.
Even for drivers that do not depend on CONFIG_OF, it's almost always
better to leave out the of_match_ptr(), since the only thing it can
possibly do is to save a few bytes of .text if a driver can be used both
with and without it.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230807134127.2380390-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Alina Yu <alina_yu@richtek.com>:
This patch series adds support for RTQ2208 SubPMIC regulators.
The RTQ2208 is a multi-phase, programmable power management IC that
integrate with dual multi-configurable, synchronous buck converters
and two ldos. The bucks features wide output voltage range from 0.4V to 2.05V
and the capability to configure the corresponding power stages.
The LDO 12 is NLDO 515 low voltage type, so fix accordingly.
Fixes: e6e3776d68 ("regulator: qcom-rpmh: Add support for PM8550 regulators")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230801095702.2891127-1-abel.vesa@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The previous version of this driver included wildcards in file names and
descriptions. This patch renames the driver to only support MAX5970 and
MAX5978, which are the only chips that the driver actually supports.
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Link: https://lore.kernel.org/r/20230801102453.1798292-1-Naresh.Solanki@9elements.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Two versions of the original patch were sent but V1 was merged instead
of V2 due to a mistake.
So update to V2.
The advantage of V2 is that it completely avoids dereferencing the pointer,
even just to take the address, which may fix problems with some compilers.
Both versions work on my gcc 9.4 but use the safer one.
Fixes: 98e2dd5f7a ("regulator: da9063: fix null pointer deref with partial DT config")
Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Tested-by: Benjamin Bara <benjamin.bara@skidata.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230804083514.1887124-1-martin.fuzzey@flowbird.group
Signed-off-by: Mark Brown <broonie@kernel.org>
When using low verion gcc(7.5) to build the max77857-regulator driver,
got the following error:
drivers/regulator/max77857-regulator.c:312:16: error: initializer element is not constant
.ramp_delay = max77857_ramp_table[0][0],
To fix this by introducing a macro RAMAP_DELAY_INIT_VAL to define the
value of max77857_ramp_table[0[0].
Fixes: af71cccade ("regulator: max77857: Add ADI MAX77857/59/MAX77831 Regulator Support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230803113654.818640-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
max77857_regmap_config and max77857_driver are only used
in max77857-regulator.c now, change them to static.
Fixes: af71cccade ("regulator: max77857: Add ADI MAX77857/59/MAX77831 Regulator Support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230801130354.552243-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Qualcomm MMIO-mapped reference voltage regulator is only present on
Qualcomm SoCs. Hence add a dependency on ARCH_QCOM, to prevent asking
the user about this driver when configuring a kernel without Qualcomm
SoC support.
Fixes: 7cbfbe2379 ("regulator: Introduce Qualcomm REFGEN regulator driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/60938ed138c9331ba3d2891fbd3b3d6644d3fbdc.1690300012.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Right now the regulator helpers expect raw register values for the range
selectors. This is different from the voltage selectors, which are
normalized as bitfield values. This leads to a bit of confusion. Also,
raw values are harder to copy from datasheets or match up with them,
as datasheets will typically have bitfield values.
Make the helpers expect bitfield values, and convert existing users. The
field in regulator_desc is renamed to |linear_range_selectors_bitfield|.
This is intended to cause drivers added in the same merge window and
out-of-tree drivers using the incorrect variable and values to break,
preventing incorrect values being used on actual hardware and potentially
producing magic smoke.
Also include bitops.h explicitly for ffs(), and reorder the header include
statements. While at it, also replace module.h with export.h, since the
only use is EXPORT_SYMBOL_GPL.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230714081408.274567-1-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
After syncing the enable status of VCN33_WIFI to VCN33_BT, the driver
will disable VCN33_WIFI. If it fails it will error out with a message.
However the error message incorrectly refers to VCN33_BT.
Fix the error message so that it correctly refers to VCN33_WIFI.
Suggested-by: Fei Shao <fshao@chromium.org>
Fixes: 65bae54e08 ("regulator: mt6358: Merge VCN33_* regulators")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230721082903.2038975-4-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Syncing VCN33_* enable status should be done after checking the PMIC's
ID, to avoid setting random bits on other PMICs.
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fixes: 65bae54e08 ("regulator: mt6358: Merge VCN33_* regulators")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230721082903.2038975-3-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver was introduced when .probe_new was the right probe callback
to use for i2c drivers. Today .probe is the right one (again) and the
driver was already switched in commit 964e186547 ("regulator: Switch
i2c drivers back to use .probe()") but the name continued to include
"_new". To prevent code readers wondering about what might be new here,
drop that part of the name.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230721073303.112597-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
A few functions in the new driver are global but only used in this file:
drivers/regulator/max77857-regulator.c:209:5: error: no previous prototype for 'max77859_get_voltage_sel' [-Werror=missing-prototypes]
drivers/regulator/max77857-regulator.c:221:5: error: no previous prototype for 'max77859_set_current_limit' [-Werror=missing-prototypes]
drivers/regulator/max77857-regulator.c:235:5: error: no previous prototype for 'max77859_get_current_limit' [-Werror=missing-prototypes]
Mark them static, which produces potentially better code and avoids the warning.
Fixes: af71cccade ("regulator: max77857: Add ADI MAX77857/59/MAX77831 Regulator Support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230718193938.3593118-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
commit 03c835f498 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230718201453.3953602-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Regulator driver for MAX77857/59 and MAX77831.
The MAX77857 is a high-efficiency, high-performance
buck-boost converter targeted for systems requiring
a wide input voltage range (2.5V to 16V).
The MAX77859 is high-Efficiency Buck-Boost Converter
for USB-PD/PPS Applications. It has wide input range
(2.5V to 22V)
The MAX77831 is a high-efficiency, high-performance
buck-boost converter targeted for systems requiring
wide input voltage range (2.5V to 16V).
Signed-off-by: Okan Sahin <okan.sahin@analog.com>
Link: https://lore.kernel.org/r/20230717050736.10075-3-okan.sahin@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When some of the da9063 regulators do not have corresponding DT nodes
a null pointer dereference occurs on boot because such regulators have
no init_data causing the pointers calculated in
da9063_check_xvp_constraints() to be invalid.
Do not dereference them in this case.
Fixes: b8717a80e6 ("regulator: da9063: implement setter for voltage monitoring")
Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Link: https://lore.kernel.org/r/20230616143736.2946173-1-martin.fuzzey@flowbird.group
Signed-off-by: Mark Brown <broonie@kernel.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230714174930.4063320-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch makes the use of IRQ optional to make the DA9061/62 usable
for designs that don't have the IRQ pin connected, because the regulator
is usable without IRQ.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Reviewed-by: Adam Ward <DLG-Adam.Ward.opensource@dm.renesas.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20230713090328.3879-1-cniedermaier@dh-electronics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Konrad Dybcio <konrad.dybcio@linaro.org>:
Recent Qualcomm SoCs have a REFGEN (reference voltage generator) regulator
responsible for providing a reference voltage to some on-SoC IPs (like DSI
or PHYs). It can be turned off when unused to save power.
This series introduces the driver for it.
Add compatible and use DID to check rt5733.
The only difference bwtween rt5733 and rt5739 is the output range and
voltage step. These two chips can be distinguished from the DIE id.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1688048996-25606-3-git-send-email-cy_huang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Modern Qualcomm SoCs have a REFGEN (reference voltage generator)
regulator, providing reference voltage to on-chip IP, like PHYs.
Add a driver to support toggling that regulator.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230628-topic-refgen-v3-2-9fbf0e605d23@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
A simple dependency fix for a newly added driver.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmSmuY0ACgkQJNaLcl1U
h9Crtgf/dei7wq5KQApf9Brk/keBWmll1hE5rHs5d9dEqVBuo7h59/BaR1KFK9C8
CP4/zI6EH1Hb1Vdog/WM7ByKxejEJmVx/VmngoEzWIm2ki1NWfxupZ8fTcG1AC/w
ET8p2ZomylOOlqATHmyN5GGvDeb6W5FFJAM2QuAx1cf6zfoHqLkTHkeIi31tKSia
qGFSB5VBMLyWGETe8gN2KVgsIw1jU/lknPryDgFSWbx6jgLiy4o6z6ZMPtlImx0y
sZJ/iIXZrYLt6qlojieazVay+46ej7pKKSKWHKdtFgUBmTiCoq/6T75pRzLTghTP
9I2mBk9Vz/Fj7Y87NnauBHKFuXN2gQ==
=T2SS
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.5-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"A simple dependency fix for a newly added driver"
* tag 'regulator-fix-v6.5-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: raa215300: Add build dependency with COMMON_CLK
- Add support for TI TPS6594/TPS6593/LP8764 PMICs
- Add support for Samsung RT5033 Battery Charger
- Add support for Analog Devices MAX77540 and MAX77541 PMICs
- New Device Support
- Add support for SPI to Rockchip RK808 (and friends)
- Add support for AXP192 PMIC to X-Powers AXP20X
- Add support for AXP313a PMIC to X-Powers AXP20X
- Add support for RK806 to Rockchip RK8XX
- Removed Device Support
- Removed MFD support for Richtek RT5033 Battery
- Fix-ups
- Remove superfluous code
- Switch I2C drivers from .probe_new() to .probe()
- Convert over to managed resources (devm_*(), etc)
- Use dev_err_probe() for returning errors from .probe()
- Add lots of Device Tree bindings / support
- Improve cache efficiency by switching to Maple
- Use own exported namespaces (NS)
- Include missing and remove superfluous headers
- Start using / convert to the new shutdown sys-off API
- Trivial: variable / define renaming
- Make use of of_property_read_reg() when requesting DT 'reg's
- Bug Fixes
- Fix chip revision readout due to incorrect data masking
- Amend incorrect register and mask values used for charger state
- Hide unused functionality at compile time
- Fix resource leaks following error handling routines
- Return correct error values and fix error handling in general
- Repair incorrect device names - used for device matching
- Remedy broken module auto-loading
-----BEGIN PGP SIGNATURE-----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=EmOj
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for TI TPS6594/TPS6593/LP8764 PMICs
- Add support for Samsung RT5033 Battery Charger
- Add support for Analog Devices MAX77540 and MAX77541 PMICs
New Device Support:
- Add support for SPI to Rockchip RK808 (and friends)
- Add support for AXP192 PMIC to X-Powers AXP20X
- Add support for AXP313a PMIC to X-Powers AXP20X
- Add support for RK806 to Rockchip RK8XX
Removed Device Support:
- Removed MFD support for Richtek RT5033 Battery
Fix-ups:
- Remove superfluous code
- Switch I2C drivers from .probe_new() to .probe()
- Convert over to managed resources (devm_*(), etc)
- Use dev_err_probe() for returning errors from .probe()
- Add lots of Device Tree bindings / support
- Improve cache efficiency by switching to Maple
- Use own exported namespaces (NS)
- Include missing and remove superfluous headers
- Start using / convert to the new shutdown sys-off API
- Trivial: variable / define renaming
- Make use of of_property_read_reg() when requesting DT 'reg's
Bug Fixes:
- Fix chip revision readout due to incorrect data masking
- Amend incorrect register and mask values used for charger state
- Hide unused functionality at compile time
- Fix resource leaks following error handling routines
- Return correct error values and fix error handling in general
- Repair incorrect device names - used for device matching
- Remedy broken module auto-loading"
* tag 'mfd-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (51 commits)
dt-bindings: mfd: max77541: Add ADI MAX77541/MAX77540
iio: adc: max77541: Add ADI MAX77541 ADC Support
regulator: max77541: Add ADI MAX77541/MAX77540 Regulator Support
dt-bindings: regulator: max77541: Add ADI MAX77541/MAX77540 Regulator
mfd: Switch two more drivers back to use struct i2c_driver::probe
dt-bindings: mfd: samsung,s5m8767: Simplify excluding properties
mfd: stmpe: Only disable the regulators if they are enabled
mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
dt-bindings: mfd: gateworks-gsc: Remove unnecessary fan-controller nodes
mfd: core: Use of_property_read_reg() to parse "reg"
mfd: stmfx: Nullify stmfx->vdd in case of error
mfd: stmfx: Fix error path in stmfx_chip_init
mfd: intel-lpss: Add missing check for platform_get_resource
mfd: stpmic1: Add PMIC poweroff via sys-off handler
mfd: stpmic1: Fixup main control register and bits naming
dt-bindings: mfd: qcom,tcsr: Add the compatible for IPQ8074
mfd: tps65219: Add support for soft shutdown via sys-off API
mfd: pm8008: Drop bogus i2c module alias
mfd: pm8008: Fix module autoloading
mfd: tps65219: Add GPIO cell instance
...
The COMMON_CLK config is not enabled in some of the architectures.
This causes build issues. Fix these issues by adding build dependency.
ERROR: modpost: "clk_unregister_fixed_rate" [drivers/regulator/raa215300.ko] undefined!
ERROR: modpost: "clk_register_fixed_rate" [drivers/regulator/raa215300.ko] undefined!
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306282012.sPQAuAN7-lkp@intel.com/
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230628174004.63984-1-biju.das.jz@bp.renesas.com
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
Regulator driver for both MAX77541 and MAX77540.
The MAX77541 is a high-efficiency step-down converter
with two 3A switching phases for single-cell Li+ battery
and 5VDC systems.
The MAX77540 is a high-efficiency step-down converter
with two 3A switching phases.
Signed-off-by: Okan Sahin <okan.sahin@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230412111256.40013-3-okan.sahin@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
Merge series from Biju Das <biju.das.jz@bp.renesas.com>:
This patch series aims to add support for Renesas PMIC RAA215300 and
built-in RTC found on this PMIC device.
The details of PMIC can be found here[1].
Renesas PMIC RAA215300 exposes two separate i2c devices, one for the main
device and another for rtc device.
The RAA215300 is a 9-channel PMIC that consists of
* Internally compensated regulators
* built-in Real Time Clock (RTC)
* 32kHz crystal oscillator
* coin cell battery charger
The RTC on RAA215300 is similar to the IP found in the ISL1208.
The existing driver for the ISL1208 works for this PMIC too,
however the RAA215300 exposes two devices via I2C, one for the RTC
IP, and one for everything else. The RTC IP has to be enabled
by the other I2C device, therefore this driver is necessary to get
the RTC to work.
The external oscillator bit is inverted on PMIC version 0x11.
Add PMIC RAA215300 driver for enabling RTC block and instantiating
RTC device based on PMIC version.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/Message-Id: <20230623140948.384762-3-biju.das.jz@bp.renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The ltc3676 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-regulator-ltc-maple-v1-2-08c15181f8b2@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The ltc3589 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-regulator-ltc-maple-v1-1-08c15181f8b2@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
With W=1:
drivers/regulator/helpers.c:947: warning: Function parameter or member 'ramp_delay' not described in 'regulator_set_ramp_delay_regmap'
Fix it by documenting the parameter.
Fixes: fb8fee9efd ("regulator: Add regmap helper for ramp-delay setting")
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1686881298-28333-1-git-send-email-cy_huang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some of the regulators on the MT6358/MT6366 PMICs have just one linear
voltage range. These are the bulk regulators and VSRAM_* LDOs. Currently
they are modeled with one linear range, but also have their minimum,
maximum, and step voltage described.
Convert them to the linear voltage helpers. These helpers are a bit
simpler, and we can also drop the linear range definitions. Also reflow
the touched lines now that they are shorter.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230609083009.2822259-7-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In the MT6358 regulator driver, each regulator is described by a
|struct regulator_desc| wrapped by a |struct mt6358_regulator_info|.
The latter was tied to the regulator device using the config's
driver_data field, which meant that the variables could not be constant.
Since each regulator device has a pointer to its regulator_desc, and
mt6358_regulator_info wraps that, the driver could use container_of()
to retrieve it instead.
Switch to using container_of(), drop tha driver_data setting, and
const-ify all the regulator descriptions.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230609083009.2822259-6-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The *_SSHUB regulators are actually alternate configuration interfaces
for their non *_SSHUB counterparts. They are not separate regulator
outputs. These registers are intended for the companion processor to
use to configure the power rails while the main processor is sleeping.
They are not intended for the main operating system to use.
Since they are not real outputs they shouldn't be modeled separately.
Remove them. Luckily no device tree actually uses them.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20230609083009.2822259-5-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The VCN33_BT and VCN33_WIFI regulators are actually the same regulator,
having the same voltage setting and output pin. There are simply two
enable bits that are ORed together to enable the regulator.
Having two regulators representing the same output pin is misleading
from a design matching standpoint, and also error-prone in driver
implementations. If consumers try to set different voltages on either
regulator, the one set later would override the one set before. There
are ways around this, such as chaining them together and having the
downstream one act as a switch. But given there's only one output pin,
such a workaround doesn't match reality.
Remove the VCN33_WIFI regulator. During the probe phase, have the driver
sync the enable status of VCN33_WIFI to VCN33_BT. Also drop the suffix
so that the regulator name matches the pin name in the datasheet.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230609083009.2822259-4-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The previous conversion back to .probe done in commit 964e186547
("regulator: Switch i2c drivers back to use .probe()") was done based on
v6.3. Since then two more drivers were added which need to be convert
back in the same way before eventually .probe_new() can be dropped from
struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230611203559.827168-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The PM8550 uses only NLDOs 515 and the LDO 6 through 8 are low voltage
type, so fix accordingly.
Fixes: e6e3776d68 ("regulator: qcom-rpmh: Add support for PM8550 regulators")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230605115607.921308-1-abel.vesa@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Esteban Blanc <eblanc@baylibre.com>:
TPS6594 is a Power Management IC which provides regulators and others
features like GPIOs, RTC, watchdog, ESMs (Error Signal Monitor), and
PFSM (Pre-configurable Finite State Machine). The SoC and the PMIC can
communicate through the I2C or SPI interfaces.
TPS6594 is the super-set device while TPS6593 and LP8764 are derivatives.
This series adds support to TI TPS6594 PMIC and its derivatives.
This patch adds support for TPS6594 regulators (bucks and LDOs).
The output voltages are configurable and are meant to supply power
to the main processor and other components.
Bucks can be used in single or multiphase mode, depending on PMIC
part number.
Signed-off-by: Jerome Neanne <jneanne@baylibre.com>
Signed-off-by: Esteban Blanc <eblanc@baylibre.com>
Link: https://lore.kernel.org/r/20230522163115.2592883-4-eblanc@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Andre Przywara <andre.przywara@arm.com>:
This patch series adds support for the X-Powers AXP15060 and AXP313a
PMIC, which are general purpose PMICs as seen on different boards with
different SOCs, mostly from Allwinner.
This is mostly a repost of the previous patches, combining both the
AXP313a and AXP15060 series, rebased on top of v6.4-rc3, and omitting
the patches that already got merged.
The first two patches are the successors of the AXP313a v10 post,
the third patch is based on Shengyu's AXP15060 v3 post.
There were no code changes, just some tiny context differences due to
the rebase, plus I added the newly gained tags.
As the DT bindings and the AXP15060 MFD part are already in the tree,
this is just completing support with the MFD part for the AXP313a, and
the regulator support for both PMICs.
The AXP15060 is a typical I2C-controlled PMIC, seen on multiple boards
with different default register value. Current driver is tested on
Starfive Visionfive 2.
The RTCLDO is fixed, and cannot even be turned on or off. On top of
that, its voltage is customisable (either 1.8V or 3.3V). We pretend it's
a fixed 1.8V regulator since other AXP driver also do like this. Also,
BSP code ignores this regulator and it's not used according to VF2
schematic.
Describe the AXP15060's voltage settings and switch registers, how the
voltages are encoded, and connect this to the MFD device via its
regulator ID.
Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Shengyu Qu <wiagn233@outlook.com>
Link: https://lore.kernel.org/r/20230524000012.15028-4-andre.przywara@arm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The AXP313a is your typical I2C controlled PMIC, although in a lighter
fashion compared to the other X-Powers PMICs: it has only three DCDC
rails, three LDOs, and no battery charging support.
The AXP313a datasheet does not describe a register to change the DCDC
switching frequency, and talks of it being fixed at 3 MHz. Check that
the property allowing to change that frequency is absent from the DT,
and bail out otherwise.
The third LDO, RTCLDO, is fixed, and cannot even be turned on or off,
programmatically. On top of that, its voltage is customisable (either
1.8V or 3.3V), which we cannot describe easily using the existing
regulator wrapper functions. This should be fixed properly, using
regulator-{min,max}-microvolt in the DT, but this requires more changes
to the code. As some other PMICs (AXP2xx, AXP803) seem to paper over the
same problem as well, we follow suit here and pretend it's a fixed 1.8V
regulator. A proper fix can follow later. The BSP code seems to ignore
this regulator altogether.
Describe the AXP313A's voltage settings and switch registers, how the
voltages are encoded, and connect this to the MFD device via its
regulator ID.
Signed-off-by: Martin Botka <martin.botka@somainline.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Shengyu Qu <wiagn233@outlook.com>
Link: https://lore.kernel.org/r/20230524000012.15028-3-andre.przywara@arm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Geert Uytterhoeven <geert+renesas@glider.be>:
This patch series corrects an error check, fixes error messages when
debugfs is not enabled, and improves debugfs error handling in the
regulator core.
The following shows up in the kernel log on systems using the STM32MP15xx USBPHYC:
"
regulator regulator.19: regulator disable timed out!
reg18: failed to disable: -ETIMEDOUT
"
This 'regulator.19' is 'pwr@50001000' 'reg18' in stm32mp151.dts DT, or
"Power control (PWR)" register "PWR_CR3" bits "REG18" on STM32MP15xx
reference manual.
The reason for the timeout seems to be the poll which this patch changes.
When turning this regulator OFF, PWR_CR3 reads 0xf0000000 , then REG18_EN
bit is cleared, and then this poll waits until REG18_RDY bit is cleared as
well, but that never happens, the PWR_CR3 keeps reading 0xe0000000 .
I am not sure whether this should happen, I suspect the 1V8 supply is
always READY when the 1V8 input is present, and the regulator can only
ever be enabled/disabled using the REG18_EN bit, but the REG18_READY
bit is never cleared again.
This patch adjusts the poll to check whether REG18_EN has been cleared
on regulator disable, but retains the check for REG18_READY in regulator
enable as there it makes sense to verify the regulator is really READY.
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20230518023946.530381-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
If CONFIG_DEBUG_FS is not set:
regulator: Failed to create debugfs directory
...
regulator-dummy: Failed to create debugfs directory
As per the comments for debugfs_create_dir(), errors returned by this
function should be expected, and ignored:
* If debugfs is not enabled in the kernel, the value -%ENODEV will be
* returned.
*
* NOTE: it's expected that most callers should _ignore_ the errors returned
* by this function. Other debugfs functions handle the fact that the "dentry"
* passed to them could be an error and they don't crash in that case.
* Drivers should generally work fine even if debugfs fails to init anyway.
Adhere to the debugfs spirit, and streamline all operations by:
1. Demoting the importance of the printed error messages to debug
level, like is already done in create_regulator(),
2. Further ignoring any returned errors, as by design, all debugfs
functions are no-ops when passed an error pointer.
Fixes: 2bf1c45be3 ("regulator: Fix error checking for debugfs_create_dir")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/2f8bb6e113359ddfab7b59e4d4274bd4c06d6d0a.1685013051.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
In case of failure, debugfs_create_dir() does not return NULL, but an
error pointer. Most incorrect error checks were fixed, but the one in
create_regulator() was forgotten.
Fix the remaining error check.
Fixes: 2bf1c45be3 ("regulator: Fix error checking for debugfs_create_dir")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/ee980a108b5854dd8ce3630f8f673e784e057d17.1685013051.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Sebastian Reichel <sebastian.reichel@collabora.com>:
All existing boards using RK3588/RK3588s use RK806 PMICs. This series is now
the main blocker for full upstream support of those boards and it would be good
to have it merged for 6.5 :) The patches have been tested on multiple different
platforms and are mainly missing an Ack from Mark or Liam for the rk808-regulator
changes.
Merging must happen through a single tree, since the pinctrl and regulator
drivers rely on the register definitions from the include file added by the MFD
patch. My suggested merge strategy is that Lee creates an immutable branch for
the regulator/pinctrl tree once all Acks have been collected.
Add rk806 support to the existing rk808 regulator
driver.
This has been implemented using shengfei Xu's rk806
specific driver from the vendor tree as reference.
Co-developed-by: shengfei Xu <xsf@rock-chips.com>
Signed-off-by: shengfei Xu <xsf@rock-chips.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230504173618.142075-15-sebastian.reichel@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The rk808 driver registers a bunch of regulator devices in a loop.
If one of the later regulators fails to register (usually because
its input supply is not yet available) everything will be unrolled
(i.e. previously registered regulators will be unregistered). With
asynchronous registration there might already be consumers, though.
We do not have the necessary infrastructure to properly unregister
the consumer device, so this scenario should be avoided.
First checking all input supplies or disallowing usage of the regulators
until all are registered does not work, since there can be
self-references (e.g. DCDC channels providing the supply of LDOs).
The only sensible solution I found is registering the regulator devices
asynchronously, so that we do not have to unroll. Since this is a major
rework let's revert back to synchronous probing for now to fix the issue
at hand.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230504173618.142075-14-sebastian.reichel@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
By overridering the device's of_node a bit earlier we can
get the GPIOs and any other DT properties from our own
device instead of relying on the parent device.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230504173618.142075-13-sebastian.reichel@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the probe routine fails with -EPROBE_DEFER after taking over the
OF node from its parent driver, reprobing triggers pinctrl_bind_pins()
and that will fail. Fix this by setting of_node_reused, so that the
device does not try to setup pin muxing.
For me this always happens once the driver is marked to prefer async
probing and never happens without that flag.
Fixes: 259b93b21a ("regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in 4.14")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230504173618.142075-12-sebastian.reichel@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Expose and document the table lookup logic used by
regulator_set_ramp_delay_regmap, so that it can be
reused for devices that cannot be configured via
regulator_set_ramp_delay_regmap.
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230504173618.142075-11-sebastian.reichel@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add hardware version read check for PMIC MT6359
Signed-off-by: Sen Chu <sen.chu@mediatek.com
Fixes: 4cfc965475 ("regulator: mt6359: Add support for MT6359P regulator")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com
Link: https://lore.kernel.org/r/20230518040646.8730-1-sen.chu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org
This patch fixes the error checking in core.c in debugfs_create_dir.
The correct way to check if an error occurred is 'IS_ERR' inline function.
Signed-off-by: Osama Muhammad <osmtendev@gmail.com
Suggested-by: Ivan Orlov <ivan.orlov0322@gmail.com
Link: https://lore.kernel.org/r/20230515172938.13338-1-osmtendev@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org
Split rk808 into a core and an i2c part in preparation for
SPI support.
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> # for RTC
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230504173618.142075-6-sebastian.reichel@collabora.com
Signed-off-by: Lee Jones <lee@kernel.org>
This fixes a copy & paste error.
No functional change intended, BUCK1_ENMODE_MASK equals BUCK2_ENMODE_MASK.
Fixes: 0935ff5f1f ("regulator: pca9450: add pca9450 pmic driver")
Originally-from: Robin Gong <yibin.gong@nxp.com
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de
Link: https://lore.kernel.org/r/20230512081935.2396180-1-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org
Merge series from Mårten Lindahl <marten.lindahl@axis.com>:
This series adds basic support for TI's TPS62870/TPS62871/TPS62872/
TPS62873 high-frequency single-channel step-down converters with an
I2C interface.
The devices can operate in power save mode for maximum efficiency, or
forced-PWM mode for best transient performance and lowest output
voltage ripple. All chip variants have four output voltage ranges and
the driver changes active range depending on the requested voltage
setting.
There are differences in the electrical characteristics and packaging
between the variants, but the register interfaces are identical.
The driver's probe() first registers regulators in a loop and then in a
second loop passes them as irq data to the interrupt handlers. However
the function to get the regulator for given name
tps65219_get_rdev_by_name() was a no-op due to argument passed by value,
not pointer, thus the second loop assigned always same value - from
previous loop. The interrupts, when fired, where executed with wrong
data. Compiler also noticed it:
drivers/regulator/tps65219-regulator.c: In function ‘tps65219_get_rdev_by_name’:
drivers/regulator/tps65219-regulator.c:292:60: error: parameter ‘dev’ set but not used [-Werror=unused-but-set-parameter]
Fixes: c12ac5fc3e ("regulator: drivers: Add TI TPS65219 PMIC regulators support")
Cc: <stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com
Link: https://lore.kernel.org/r/20230507144656.192800-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
Add support for Texas Instruments TPS6287x, single-channel
synchronous step-down converters with four output voltage ranges.
Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com
Link: https://lore.kernel.org/r/20230502-tps6287x-driver-v3-2-e25140a023f5@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de
Link: https://lore.kernel.org/r/20230505220218.1239542-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org
The summary of the changes for this pull requests is:
* Song Liu's new struct module_memory replacement
* Nick Alcock's MODULE_LICENSE() removal for non-modules
* My cleanups and enhancements to reduce the areas where we vmalloc
module memory for duplicates, and the respective debug code which
proves the remaining vmalloc pressure comes from userspace.
Most of the changes have been in linux-next for quite some time except
the minor fixes I made to check if a module was already loaded
prior to allocating the final module memory with vmalloc and the
respective debug code it introduces to help clarify the issue. Although
the functional change is small it is rather safe as it can only *help*
reduce vmalloc space for duplicates and is confirmed to fix a bootup
issue with over 400 CPUs with KASAN enabled. I don't expect stable
kernels to pick up that fix as the cleanups would have also had to have
been picked up. Folks on larger CPU systems with modules will want to
just upgrade if vmalloc space has been an issue on bootup.
Given the size of this request, here's some more elaborate details
on this pull request.
The functional change change in this pull request is the very first
patch from Song Liu which replaces the struct module_layout with a new
struct module memory. The old data structure tried to put together all
types of supported module memory types in one data structure, the new
one abstracts the differences in memory types in a module to allow each
one to provide their own set of details. This paves the way in the
future so we can deal with them in a cleaner way. If you look at changes
they also provide a nice cleanup of how we handle these different memory
areas in a module. This change has been in linux-next since before the
merge window opened for v6.3 so to provide more than a full kernel cycle
of testing. It's a good thing as quite a bit of fixes have been found
for it.
Jason Baron then made dynamic debug a first class citizen module user by
using module notifier callbacks to allocate / remove module specific
dynamic debug information.
Nick Alcock has done quite a bit of work cross-tree to remove module
license tags from things which cannot possibly be module at my request
so to:
a) help him with his longer term tooling goals which require a
deterministic evaluation if a piece a symbol code could ever be
part of a module or not. But quite recently it is has been made
clear that tooling is not the only one that would benefit.
Disambiguating symbols also helps efforts such as live patching,
kprobes and BPF, but for other reasons and R&D on this area
is active with no clear solution in sight.
b) help us inch closer to the now generally accepted long term goal
of automating all the MODULE_LICENSE() tags from SPDX license tags
In so far as a) is concerned, although module license tags are a no-op
for non-modules, tools which would want create a mapping of possible
modules can only rely on the module license tag after the commit
8b41fc4454 ("kbuild: create modules.builtin without Makefile.modbuiltin
or tristate.conf"). Nick has been working on this *for years* and
AFAICT I was the only one to suggest two alternatives to this approach
for tooling. The complexity in one of my suggested approaches lies in
that we'd need a possible-obj-m and a could-be-module which would check
if the object being built is part of any kconfig build which could ever
lead to it being part of a module, and if so define a new define
-DPOSSIBLE_MODULE [0]. A more obvious yet theoretical approach I've
suggested would be to have a tristate in kconfig imply the same new
-DPOSSIBLE_MODULE as well but that means getting kconfig symbol names
mapping to modules always, and I don't think that's the case today. I am
not aware of Nick or anyone exploring either of these options. Quite
recently Josh Poimboeuf has pointed out that live patching, kprobes and
BPF would benefit from resolving some part of the disambiguation as
well but for other reasons. The function granularity KASLR (fgkaslr)
patches were mentioned but Joe Lawrence has clarified this effort has
been dropped with no clear solution in sight [1].
In the meantime removing module license tags from code which could never
be modules is welcomed for both objectives mentioned above. Some
developers have also welcomed these changes as it has helped clarify
when a module was never possible and they forgot to clean this up,
and so you'll see quite a bit of Nick's patches in other pull
requests for this merge window. I just picked up the stragglers after
rc3. LWN has good coverage on the motivation behind this work [2] and
the typical cross-tree issues he ran into along the way. The only
concrete blocker issue he ran into was that we should not remove the
MODULE_LICENSE() tags from files which have no SPDX tags yet, even if
they can never be modules. Nick ended up giving up on his efforts due
to having to do this vetting and backlash he ran into from folks who
really did *not understand* the core of the issue nor were providing
any alternative / guidance. I've gone through his changes and dropped
the patches which dropped the module license tags where an SPDX
license tag was missing, it only consisted of 11 drivers. To see
if a pull request deals with a file which lacks SPDX tags you
can just use:
./scripts/spdxcheck.py -f \
$(git diff --name-only commid-id | xargs echo)
You'll see a core module file in this pull request for the above,
but that's not related to his changes. WE just need to add the SPDX
license tag for the kernel/module/kmod.c file in the future but
it demonstrates the effectiveness of the script.
Most of Nick's changes were spread out through different trees,
and I just picked up the slack after rc3 for the last kernel was out.
Those changes have been in linux-next for over two weeks.
The cleanups, debug code I added and final fix I added for modules
were motivated by David Hildenbrand's report of boot failing on
a systems with over 400 CPUs when KASAN was enabled due to running
out of virtual memory space. Although the functional change only
consists of 3 lines in the patch "module: avoid allocation if module is
already present and ready", proving that this was the best we can
do on the modules side took quite a bit of effort and new debug code.
The initial cleanups I did on the modules side of things has been
in linux-next since around rc3 of the last kernel, the actual final
fix for and debug code however have only been in linux-next for about a
week or so but I think it is worth getting that code in for this merge
window as it does help fix / prove / evaluate the issues reported
with larger number of CPUs. Userspace is not yet fixed as it is taking
a bit of time for folks to understand the crux of the issue and find a
proper resolution. Worst come to worst, I have a kludge-of-concept [3]
of how to make kernel_read*() calls for modules unique / converge them,
but I'm currently inclined to just see if userspace can fix this
instead.
[0] https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/
[1] https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com
[2] https://lwn.net/Articles/927569/
[3] https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org
-----BEGIN PGP SIGNATURE-----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=56WK
-----END PGP SIGNATURE-----
Merge tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module updates from Luis Chamberlain:
"The summary of the changes for this pull requests is:
- Song Liu's new struct module_memory replacement
- Nick Alcock's MODULE_LICENSE() removal for non-modules
- My cleanups and enhancements to reduce the areas where we vmalloc
module memory for duplicates, and the respective debug code which
proves the remaining vmalloc pressure comes from userspace.
Most of the changes have been in linux-next for quite some time except
the minor fixes I made to check if a module was already loaded prior
to allocating the final module memory with vmalloc and the respective
debug code it introduces to help clarify the issue. Although the
functional change is small it is rather safe as it can only *help*
reduce vmalloc space for duplicates and is confirmed to fix a bootup
issue with over 400 CPUs with KASAN enabled. I don't expect stable
kernels to pick up that fix as the cleanups would have also had to
have been picked up. Folks on larger CPU systems with modules will
want to just upgrade if vmalloc space has been an issue on bootup.
Given the size of this request, here's some more elaborate details:
The functional change change in this pull request is the very first
patch from Song Liu which replaces the 'struct module_layout' with a
new 'struct module_memory'. The old data structure tried to put
together all types of supported module memory types in one data
structure, the new one abstracts the differences in memory types in a
module to allow each one to provide their own set of details. This
paves the way in the future so we can deal with them in a cleaner way.
If you look at changes they also provide a nice cleanup of how we
handle these different memory areas in a module. This change has been
in linux-next since before the merge window opened for v6.3 so to
provide more than a full kernel cycle of testing. It's a good thing as
quite a bit of fixes have been found for it.
Jason Baron then made dynamic debug a first class citizen module user
by using module notifier callbacks to allocate / remove module
specific dynamic debug information.
Nick Alcock has done quite a bit of work cross-tree to remove module
license tags from things which cannot possibly be module at my request
so to:
a) help him with his longer term tooling goals which require a
deterministic evaluation if a piece a symbol code could ever be
part of a module or not. But quite recently it is has been made
clear that tooling is not the only one that would benefit.
Disambiguating symbols also helps efforts such as live patching,
kprobes and BPF, but for other reasons and R&D on this area is
active with no clear solution in sight.
b) help us inch closer to the now generally accepted long term goal
of automating all the MODULE_LICENSE() tags from SPDX license tags
In so far as a) is concerned, although module license tags are a no-op
for non-modules, tools which would want create a mapping of possible
modules can only rely on the module license tag after the commit
8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf").
Nick has been working on this *for years* and AFAICT I was the only
one to suggest two alternatives to this approach for tooling. The
complexity in one of my suggested approaches lies in that we'd need a
possible-obj-m and a could-be-module which would check if the object
being built is part of any kconfig build which could ever lead to it
being part of a module, and if so define a new define
-DPOSSIBLE_MODULE [0].
A more obvious yet theoretical approach I've suggested would be to
have a tristate in kconfig imply the same new -DPOSSIBLE_MODULE as
well but that means getting kconfig symbol names mapping to modules
always, and I don't think that's the case today. I am not aware of
Nick or anyone exploring either of these options. Quite recently Josh
Poimboeuf has pointed out that live patching, kprobes and BPF would
benefit from resolving some part of the disambiguation as well but for
other reasons. The function granularity KASLR (fgkaslr) patches were
mentioned but Joe Lawrence has clarified this effort has been dropped
with no clear solution in sight [1].
In the meantime removing module license tags from code which could
never be modules is welcomed for both objectives mentioned above. Some
developers have also welcomed these changes as it has helped clarify
when a module was never possible and they forgot to clean this up, and
so you'll see quite a bit of Nick's patches in other pull requests for
this merge window. I just picked up the stragglers after rc3. LWN has
good coverage on the motivation behind this work [2] and the typical
cross-tree issues he ran into along the way. The only concrete blocker
issue he ran into was that we should not remove the MODULE_LICENSE()
tags from files which have no SPDX tags yet, even if they can never be
modules. Nick ended up giving up on his efforts due to having to do
this vetting and backlash he ran into from folks who really did *not
understand* the core of the issue nor were providing any alternative /
guidance. I've gone through his changes and dropped the patches which
dropped the module license tags where an SPDX license tag was missing,
it only consisted of 11 drivers. To see if a pull request deals with a
file which lacks SPDX tags you can just use:
./scripts/spdxcheck.py -f \
$(git diff --name-only commid-id | xargs echo)
You'll see a core module file in this pull request for the above, but
that's not related to his changes. WE just need to add the SPDX
license tag for the kernel/module/kmod.c file in the future but it
demonstrates the effectiveness of the script.
Most of Nick's changes were spread out through different trees, and I
just picked up the slack after rc3 for the last kernel was out. Those
changes have been in linux-next for over two weeks.
The cleanups, debug code I added and final fix I added for modules
were motivated by David Hildenbrand's report of boot failing on a
systems with over 400 CPUs when KASAN was enabled due to running out
of virtual memory space. Although the functional change only consists
of 3 lines in the patch "module: avoid allocation if module is already
present and ready", proving that this was the best we can do on the
modules side took quite a bit of effort and new debug code.
The initial cleanups I did on the modules side of things has been in
linux-next since around rc3 of the last kernel, the actual final fix
for and debug code however have only been in linux-next for about a
week or so but I think it is worth getting that code in for this merge
window as it does help fix / prove / evaluate the issues reported with
larger number of CPUs. Userspace is not yet fixed as it is taking a
bit of time for folks to understand the crux of the issue and find a
proper resolution. Worst come to worst, I have a kludge-of-concept [3]
of how to make kernel_read*() calls for modules unique / converge
them, but I'm currently inclined to just see if userspace can fix this
instead"
Link: https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/ [0]
Link: https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com [1]
Link: https://lwn.net/Articles/927569/ [2]
Link: https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org [3]
* tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (121 commits)
module: add debugging auto-load duplicate module support
module: stats: fix invalid_mod_bytes typo
module: remove use of uninitialized variable len
module: fix building stats for 32-bit targets
module: stats: include uapi/linux/module.h
module: avoid allocation if module is already present and ready
module: add debug stats to help identify memory pressure
module: extract patient module check into helper
modules/kmod: replace implementation with a semaphore
Change DEFINE_SEMAPHORE() to take a number argument
module: fix kmemleak annotations for non init ELF sections
module: Ignore L0 and rename is_arm_mapping_symbol()
module: Move is_arm_mapping_symbol() to module_symbol.h
module: Sync code of is_arm_mapping_symbol()
scripts/gdb: use mem instead of core_layout to get the module address
interconnect: remove module-related code
interconnect: remove MODULE_LICENSE in non-modules
zswap: remove MODULE_LICENSE in non-modules
zpool: remove MODULE_LICENSE in non-modules
x86/mm/dump_pagetables: remove MODULE_LICENSE in non-modules
...
- Add a thermal zone 'devdata' accessor and modify several drivers to
use it (Daniel Lezcano).
- Prevent drivers from using the 'device' internal thermal zone
structure field directly (Daniel Lezcano).
- Clean up the hwmon thermal driver (Daniel Lezcano).
- Add thermal zone id accessor and thermal zone type accessor
and prevent drivers from using thermal zone fields directly (Daniel
Lezcano).
- Clean up the acerhdf and tegra thermal drivers (Daniel Lezcano).
- Add lower bound check for sysfs input to the x86_pkg_temp_thermal
Intel thermal driver (Zhang Rui).
- Add more thermal zone device encapsulation: prevent setting structure
field directly, access the sensor device instead the thermal zone's
device for trace, relocate the traces in drivers/thermal (Daniel
Lezcano).
- Use the generic trip point for the i.MX and remove the get_trip_temp
ops (Daniel Lezcano).
- Use the devm_platform_ioremap_resource() in the Hisilicon driver
(Yang Li).
- Remove R-Car H3 ES1.* handling as public has only access to the ES2
version and the upstream support for the ES1 has been shutdown (Wolfram
Sang).
- Add a delay after initializing the bank in order to let the time to
the hardware to initialze itself before reading the temperature
(Amjad Ouled-Ameur).
- Add MT8365 support (Amjad Ouled-Ameur).
- Preparational cleanup and DT bindings for RK3588 support (Sebastian
Reichel).
- Add driver support for RK3588 (Finley Xiao).
- Use devm_reset_control_array_get_exclusive() for the Rockchip driver
(Ye Xingchen).
- Detect power gated thermal zones and return -EAGAIN when reading the
temperature (Mikko Perttunen).
- Remove thermal_bind_params structure as it is unused (Zhang Rui)
- Drop unneeded quotes in DT bindings allowing to run yamllint (Rob
Herring).
- Update the power allocator documentation according to the thermal
trace relocation (Lukas Bulwahn).
- Fix sensor 1 interrupt status bitmask for the Mediatek LVTS sensor
(Chen-Yu Tsai).
- Use the dev_err_probe() helper in the Amlogic driver (Ye Xingchen).
- Add AP domain support to LVTS thermal controllers for mt8195
(Balsam CHIHI).
- Remove buggy call to thermal_of_zone_unregister() (Daniel Lezcano).
- Make thermal_of_zone_[un]register() private to the thermal OF code
(Daniel Lezcano).
- Create a private copy of the thermal zone device parameters
structure when registering a thermal zone (Daniel Lezcano).
- Fix a kernel NULL pointer dereference in thermal_hwmon (Zhang Rui).
- Revert recent message adjustment in thermal_hwmon (Rafael Wysocki).
- Use of_property_present() for testing DT property presence in
thermal control code (Rob Herring).
- Clean up thermal_list_lock locking in the thermal core (Rafael
Wysocki).
- Add DLVR support for RFIM control in the int340x Intel thermal
driver (Srinivas Pandruvada).
-----BEGIN PGP SIGNATURE-----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=XNJE
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These mostly continue to prepare the thermal control subsystem for
using unified representation of trip points, which includes cleanups,
code refactoring and similar and update several drivers (for other
reasons), which includes new hardware support.
Specifics:
- Add a thermal zone 'devdata' accessor and modify several drivers to
use it (Daniel Lezcano)
- Prevent drivers from using the 'device' internal thermal zone
structure field directly (Daniel Lezcano)
- Clean up the hwmon thermal driver (Daniel Lezcano)
- Add thermal zone id accessor and thermal zone type accessor and
prevent drivers from using thermal zone fields directly (Daniel
Lezcano)
- Clean up the acerhdf and tegra thermal drivers (Daniel Lezcano)
- Add lower bound check for sysfs input to the x86_pkg_temp_thermal
Intel thermal driver (Zhang Rui)
- Add more thermal zone device encapsulation: prevent setting
structure field directly, access the sensor device instead the
thermal zone's device for trace, relocate the traces in
drivers/thermal (Daniel Lezcano)
- Use the generic trip point for the i.MX and remove the
get_trip_temp ops (Daniel Lezcano)
- Use the devm_platform_ioremap_resource() in the Hisilicon driver
(Yang Li)
- Remove R-Car H3 ES1.* handling as public has only access to the ES2
version and the upstream support for the ES1 has been shutdown
(Wolfram Sang)
- Add a delay after initializing the bank in order to let the time to
the hardware to initialze itself before reading the temperature
(Amjad Ouled-Ameur)
- Add MT8365 support (Amjad Ouled-Ameur)
- Preparational cleanup and DT bindings for RK3588 support (Sebastian
Reichel)
- Add driver support for RK3588 (Finley Xiao)
- Use devm_reset_control_array_get_exclusive() for the Rockchip
driver (Ye Xingchen)
- Detect power gated thermal zones and return -EAGAIN when reading
the temperature (Mikko Perttunen)
- Remove thermal_bind_params structure as it is unused (Zhang Rui)
- Drop unneeded quotes in DT bindings allowing to run yamllint (Rob
Herring)
- Update the power allocator documentation according to the thermal
trace relocation (Lukas Bulwahn)
- Fix sensor 1 interrupt status bitmask for the Mediatek LVTS sensor
(Chen-Yu Tsai)
- Use the dev_err_probe() helper in the Amlogic driver (Ye Xingchen)
- Add AP domain support to LVTS thermal controllers for mt8195
(Balsam CHIHI)
- Remove buggy call to thermal_of_zone_unregister() (Daniel Lezcano)
- Make thermal_of_zone_[un]register() private to the thermal OF code
(Daniel Lezcano)
- Create a private copy of the thermal zone device parameters
structure when registering a thermal zone (Daniel Lezcano)
- Fix a kernel NULL pointer dereference in thermal_hwmon (Zhang Rui)
- Revert recent message adjustment in thermal_hwmon (Rafael Wysocki)
- Use of_property_present() for testing DT property presence in
thermal control code (Rob Herring)
- Clean up thermal_list_lock locking in the thermal core (Rafael
Wysocki)
- Add DLVR support for RFIM control in the int340x Intel thermal
driver (Srinivas Pandruvada)"
* tag 'thermal-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (55 commits)
thermal: intel: int340x: Add DLVR support for RFIM control
thermal/core: Alloc-copy-free the thermal zone parameters structure
thermal/of: Unexport unused OF functions
thermal/drivers/bcm2835: Remove buggy call to thermal_of_zone_unregister
thermal/drivers/mediatek/lvts_thermal: Add AP domain for mt8195
dt-bindings: thermal: mediatek: Add AP domain to LVTS thermal controllers for mt8195
thermal: amlogic: Use dev_err_probe()
thermal/drivers/mediatek/lvts_thermal: Fix sensor 1 interrupt status bitmask
MAINTAINERS: adjust entry in THERMAL/POWER_ALLOCATOR after header movement
dt-bindings: thermal: Drop unneeded quotes
thermal/core: Remove thermal_bind_params structure
thermal/drivers/tegra-bpmp: Handle offline zones
thermal/drivers/rockchip: use devm_reset_control_array_get_exclusive()
dt-bindings: rockchip-thermal: Support the RK3588 SoC compatible
thermal/drivers/rockchip: Support RK3588 SoC in the thermal driver
thermal/drivers/rockchip: Support dynamic sized sensor array
thermal/drivers/rockchip: Simplify channel id logic
thermal/drivers/rockchip: Use dev_err_probe
thermal/drivers/rockchip: Simplify clock logic
thermal/drivers/rockchip: Simplify getting match data
...
A fairly quiet release, there were some cleanup and a couple of new
devices but the biggest change was converting most of the drivers to use
asynchronous probe. This allows us to ramp up multiple regulators in
parallel during boot which can have a noticable impact on modern
systems.
- Update of drivers to PROBE_PREFER_ASYNCHRONOUS to mitigate issues
with ramp times slowing down boots.
- Convert to void remove callbacks.
- Support for voltage monitoring on DA9063
- Support for Qualcomm PMC8180 and PMM8654au, Richtek RT4803 and
RT5739, Rockchip RK860x,
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmRGfzcACgkQJNaLcl1U
h9B5oAgAgNkRTmrHDzuyFZD0JUt6Wy0jewxNH7Ie5ucYEPNPaWGfPDvJkpjDZ/iB
UTPrhFAvNfVX2Z2E3Pdx4jhvbq3chlavpDaMWEqnimdfIqqqHLPEiRtVG2DiXAub
2AKS8piy136EDtWf4/HCoKiLf5Osr4i6bpOUoaHoNIqTtjhu2p7FXC9rjuRsmQgC
8kiA/fsLRcdzyhQb86myl4QktYiWTCrHzP7jpKlHAHRf5OBozapGgPR2Ih/cNoTR
0lbdvst1arkUr1wMGqvYAg1UjlAmA9TA/1kkm6j98G6ruuUzeay9bGN9tCk4SMjf
kAXks6ohTS9VvqN5ykrjm/2WF/Y9yA==
=AJNv
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"A fairly quiet release, there were some cleanup and a couple of new
devices but the biggest change was converting most of the drivers to
use asynchronous probe. This allows us to ramp up multiple regulators
in parallel during boot which can have a noticable impact on modern
systems.
Summary:
- Update of drivers to PROBE_PREFER_ASYNCHRONOUS to mitigate issues
with ramp times slowing down boots.
- Convert to void remove callbacks.
- Support for voltage monitoring on DA9063
- Support for Qualcomm PMC8180 and PMM8654au, Richtek RT4803 and
RT5739, Rockchip RK860x"
* tag 'regulator-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (46 commits)
regulator: dt-bindings: qcom,rpmh: Combine PM6150L and PM8150L if-then
regulator: core: Make regulator_lock_two() logic easier to follow
regulator: dt-bindings: qcom,rpmh: Correct PM8550 family supplies
regulator: stm32-pwr: fix of_iomap leak
dt-bindings: mfd: dlg,da9063: document voltage monitoring
regulator: da9063: implement setter for voltage monitoring
regulator: da9063: add voltage monitoring registers
regulator: fan53555: Add support for RK860X
regulator: fan53555: Use dev_err_probe
regulator: fan53555: Improve vsel_mask computation
regulator: fan53555: Make use of the bit macros
regulator: fan53555: Remove unused *_SLEW_SHIFT definitions
regulator: dt-bindings: fcs,fan53555: Add support for RK860X
regulator: qcom_smd: Add MP5496 S1 regulator
regulator: qcom_smd: Add s1 sub-node to mp5496 regulator
regulator: qcom,rpmh: add compatible for pmm8654au RPMH
regulator: qcom-rpmh: add support for pmm8654au regulators
regulator: core: Avoid lockdep reports when resolving supplies
regulator: core: Consistently set mutex_owner when using ww_mutex_lock_slow()
regulator: dt-bindings: qcom,rpmh: Add compatible for PMC8180
...
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Merge series from Benjamin Bara <bbara93@gmail.com>:
Follow-up for my initial patch regarding the disabling of unused
voltage monitors. We use the PWR_OK functionality, which asserts GP_FB2
if every monitored voltage is in range. This patch should provide the
possibility to deactivate a voltage monitor from the DT if the regulator
might be disabled during run time. For this purpose, the regulator
notification support is used:
https://lore.kernel.org/all/cover.1622628333.git.matti.vaittinen@fi.rohmeurope.com/
Smatch reports:
drivers/regulator/stm32-pwr.c:166 stm32_pwr_regulator_probe() warn:
'base' from of_iomap() not released on lines: 151,166.
In stm32_pwr_regulator_probe(), base is not released
when devm_kzalloc() fails to allocate memory or
devm_regulator_register() fails to register a new regulator device,
which may cause a leak.
To fix this issue, replace of_iomap() with
devm_platform_ioremap_resource(). devm_platform_ioremap_resource()
is a specialized function for platform devices.
It allows 'base' to be automatically released whether the probe
function succeeds or fails.
Besides, use IS_ERR(base) instead of !base
as the return value of devm_platform_ioremap_resource()
can either be a pointer to the remapped memory or
an ERR_PTR() encoded error code if the operation fails.
Fixes: dc62f951a6 ("regulator: stm32-pwr: Fix return value check in stm32_pwr_regulator_probe()")
Signed-off-by: YAN SHI <m202071378@hust.edu.cn>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202304111750.o2643eJN-lkp@intel.com/
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://lore.kernel.org/r/20230412033529.18890-1-m202071378@hust.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Allow to en- and disable voltage monitoring from the device tree.
Consider that the da9063 only monitors under- *and* over-voltage
together, so both must be set to the same severity and value.
Reviewed-by: Adam Ward <DLG-Adam.Ward.opensource@dm.renesas.com>
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Link: https://lore.kernel.org/r/20230403-da9063-disable-unused-v3-2-cc4dc698864c@skidata.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the definitions for the registers responsible for voltage
monitoring. Add a voltage monitor enable bitfield per regulator.
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Adam Ward <DLG-Adam.Ward.opensource@dm.renesas.com>
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Link: https://lore.kernel.org/r/20230403-da9063-disable-unused-v3-1-cc4dc698864c@skidata.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Cristian Ciocaltea <cristian.ciocaltea@collabora.com>:
This patch series introduces support for the Rockchip RK860X regulators,
while also providing a few fixes and improvements to the existing fan53555
driver.
RK8600/RK8601 are quite similar to the FAN53555 regulators.
RK8602/RK8603 are a bit different, having a wider output voltage
selection range, from 0.5 V to 1.5 V in 6.25 mV steps. They are used
in the Rock 5B board to power the ARM Cortex-A76 cores and the NPU.
Extend the existing fan53555 driver to support the Rockchip RK860X
regulators.
RK8600/RK8601 are pretty similar to the FAN53555 regulators.
RK8602/RK8603 are a bit different, having a wider output voltage
selection range, from 0.5 V to 1.5 V in 6.25 mV steps. They also use
additional VSEL0/VSEL1 registers for the voltage selector, but the
enable and mode bits are still located in the original FAN53555 specific
VSEL0/VSEL1 registers.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230406194158.963352-9-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use dev_err_probe() instead of dev_err() in the probe function, which
ensures the error code is always printed and, additionally, simplifies
the code a bit.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230406194158.963352-8-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation for introducing support for additional regulators which
do not use the maximum number of voltage selectors available for a given
mask, improve the mask computation formula by using fls().
Note fls() requires the bitops header, hence include it explicitly and
drop bits.h which is already pulled by bitops.h.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230406194158.963352-7-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For consistency and improved clarity, use BIT() and GENMASK() macros for
defining the bitfields inside the registers. No functional changes
intended.
While here, also fix DIE_{ID,REV} inconsistent indentation.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230406194158.963352-6-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit b61ac767db ("regulator: fan53555: Convert to use
regulator_set_ramp_delay_regmap") removed the slew_shift member from
struct fan53555_device_info, hence the {CTL,TCS}_SLEW_SHIFT definitions
remained unused. Drop them.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230406194158.963352-5-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding support for MP5496 S1 regulator on IPQ9574 SoC.
Co-developed-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230407155727.20615-3-quic_devipriy@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The support for TCS4525 regulator has been introduced with a wrong
ramp-rate mask, which has been defined as a logical expression instead
of a bit shift operation.
For clarity, fix it using GENMASK() macro.
Fixes: 914df8faa7 ("regulator: fan53555: Add TCS4525 DCDC support")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230406171806.948290-4-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since commit f2a9eb975a ("regulator: fan53555: Add support for
FAN53526") the driver makes use of the BIT() macro, but relies on the
bits header being implicitly included.
Explicitly pull the header in to avoid potential build failures in some
configurations.
While here, reorder include directives alphabetically.
Fixes: f2a9eb975a ("regulator: fan53555: Add support for FAN53526")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230406171806.948290-3-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the RPMH regulators exposed by the PMM8654au PMIC and its variants.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230406192811.460888-3-brgl@bgdev.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
An automated bot told me that there was a potential lockdep problem
with regulators. This was on the chromeos-5.15 kernel, but I see
nothing that would be different downstream compared to upstream. The
bot said:
============================================
WARNING: possible recursive locking detected
5.15.104-lockdep-17461-gc1e499ed6604 #1 Not tainted
--------------------------------------------
kworker/u16:4/115 is trying to acquire lock:
ffffff8083110170 (regulator_ww_class_mutex){+.+.}-{3:3}, at: create_regulator+0x398/0x7ec
but task is already holding lock:
ffffff808378e170 (regulator_ww_class_mutex){+.+.}-{3:3}, at: ww_mutex_trylock+0x3c/0x7b8
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(regulator_ww_class_mutex);
lock(regulator_ww_class_mutex);
*** DEADLOCK ***
May be due to missing lock nesting notation
4 locks held by kworker/u16:4/115:
#0: ffffff808006a948 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x520/0x1348
#1: ffffffc00e0a7cc0 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x55c/0x1348
#2: ffffff80828a2260 (&dev->mutex){....}-{3:3}, at: __device_attach_async_helper+0xd0/0x2a4
#3: ffffff808378e170 (regulator_ww_class_mutex){+.+.}-{3:3}, at: ww_mutex_trylock+0x3c/0x7b8
stack backtrace:
CPU: 2 PID: 115 Comm: kworker/u16:4 Not tainted 5.15.104-lockdep-17461-gc1e499ed6604 #1 9292e52fa83c0e23762b2b3aa1bacf5787a4d5da
Hardware name: Google Quackingstick (rev0+) (DT)
Workqueue: events_unbound async_run_entry_fn
Call trace:
dump_backtrace+0x0/0x4ec
show_stack+0x34/0x50
dump_stack_lvl+0xdc/0x11c
dump_stack+0x1c/0x48
__lock_acquire+0x16d4/0x6c74
lock_acquire+0x208/0x750
__mutex_lock_common+0x11c/0x11f8
ww_mutex_lock+0xc0/0x440
create_regulator+0x398/0x7ec
regulator_resolve_supply+0x654/0x7c4
regulator_register_resolve_supply+0x30/0x120
class_for_each_device+0x1b8/0x230
regulator_register+0x17a4/0x1f40
devm_regulator_register+0x60/0xd0
reg_fixed_voltage_probe+0x728/0xaec
platform_probe+0x150/0x1c8
really_probe+0x274/0xa20
__driver_probe_device+0x1dc/0x3f4
driver_probe_device+0x78/0x1c0
__device_attach_driver+0x1ac/0x2c8
bus_for_each_drv+0x11c/0x190
__device_attach_async_helper+0x1e4/0x2a4
async_run_entry_fn+0xa0/0x3ac
process_one_work+0x638/0x1348
worker_thread+0x4a8/0x9c4
kthread+0x2e4/0x3a0
ret_from_fork+0x10/0x20
The problem was first reported soon after we made many of the
regulators probe asynchronously, though nothing I've seen implies that
the problems couldn't have also happened even without that.
I haven't personally been able to reproduce the lockdep issue, but the
issue does look somewhat legitimate. Specifically, it looks like in
regulator_resolve_supply() we are holding a "rdev" lock while calling
set_supply() -> create_regulator() which grabs the lock of a
_different_ "rdev" (the one for our supply). This is not necessarily
safe from a lockdep perspective since there is no documented ordering
between these two locks.
In reality, we should always be locking a regulator before the
supplying regulator, so I don't expect there to be any real deadlocks
in practice. However, the regulator framework in general doesn't
express this to lockdep.
Let's fix the issue by simply grabbing the two locks involved in the
same way we grab multiple locks elsewhere in the regulator framework:
using the "wound/wait" mechanisms.
Fixes: eaa7995c52 ("regulator: core: avoid regulator_resolve_supply() race condition")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230329143317.RFC.v2.2.I30d8e1ca10cfbe5403884cdd192253a2e063eb9e@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
When a codepath locks a rdev using ww_mutex_lock_slow() directly then
that codepath is responsible for incrementing the "ref_cnt" and also
setting the "mutex_owner" to "current".
The regulator core consistently got that right for "ref_cnt" but
didn't always get it right for "mutex_owner". Let's fix this.
It's unlikely that this truly matters because the "mutex_owner" is
only needed if we're going to do subsequent locking of the same
rdev. However, even though it's not truly needed it seems less
surprising if we consistently set "mutex_owner" properly.
Fixes: f8702f9e4a ("regulator: core: Use ww_mutex for regulators locking")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230329143317.RFC.v2.1.I4e9d433ea26360c06dd1381d091c82bb1a4ce843@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
RT4803 is a boost converter that integrates an internal bypass FET. It
will automatically transform the operation mode between bypass and boost
based on the voltage difference of the input and output voltage.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1680050606-461-2-git-send-email-cy_huang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
devm_clk_get() can return -EPROBE_DEFER. So it is better to return the
error code from devm_clk_get(), instead of a hard coded -ENOENT.
This gives more opportunities to successfully probe the driver.
Fixes: 8959e53244 ("regulator: fixed: add possibility to enable by clock")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/18459fae3d017a66313699c7c8456b28158b2dd0.1679819354.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit 58973046c1 ("regulator: qcom-rpmh: Use
PROBE_FORCE_SYNCHRONOUS"). Further digging into the problems that
prompted the us to switch to synchronous probe showed that the root
cause was a missing "rootwait" in the kernel command line
arguments. Let's reinstate asynchronous probe.
Fixes: 58973046c1 ("regulator: qcom-rpmh: Use PROBE_FORCE_SYNCHRONOUS")
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230324063357.1.Ifdf3625a3c5c9467bd87bfcdf726c884ad220a35@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Restore synchronous probing for 'qcom,pm8150-rpmh-regulators' because
otherwise the UFSHC device is not properly initialized on QRB5165-RB5
board.
Fixes: ed6962cc3e ("regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers between 4.14 and 4.19")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20230323220518.3247530-1-m.szyprowski@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Restore synchronous probing for Arizona regulators as the main MFD
relies on the ordering of the devices probing.
As these regulators are built into the CODEC and typically have no DT
representation the regulator framework is unaware of their existence
until the driver probes. These means the probing of the driver needs to
be synchronous to ensure the regulators are not substitued for the dummy
later when the users request them.
Fixes: 259b93b21a ("regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in 4.14")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230323132047.833737-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Restore synchronous probing for Arizona regulators because otherwise
the main MFD driver will not find its core supplies.
As these regulators are built into the CODEC and typically have no DT
representation the regulator framework is unaware of their existence
until the driver probes. These means the probing of the driver needs to
be synchronous to ensure the regulators are not substitued for the dummy
later when the users request them.
Fixes: 259b93b21a ("regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in 4.14")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230323132047.833737-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Restore synchronous probing for wm8994 regulators because otherwise the
sound device is never initialized on Exynos5250-based Arndale board.
Fixes: 259b93b21a ("regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in 4.14")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230323083312.199189-1-m.szyprowski@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This follows on the change ("regulator: Set PROBE_PREFER_ASYNCHRONOUS
for drivers that existed in 4.14") but changes regulators didn't exist
in Linux 5.15 but did exist in Linux 6.1.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230316125351.6.Ibc8a86ddd5055ebbbe487a529199db7b36ccad1a@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
This follows on the change ("regulator: Set PROBE_PREFER_ASYNCHRONOUS
for drivers that existed in 4.14") but changes regulators didn't exist
in Linux 5.10 but did exist in Linux 5.15.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230316125351.5.Ia0e6d859bdfe42ea5c187fb1eb4705c1b5ea23a1@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
This follows on the change ("regulator: Set PROBE_PREFER_ASYNCHRONOUS
for drivers that existed in 4.14") but changes regulators didn't exist
in Linux 5.4 but did exist in Linux 5.10.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230316125351.4.I01f21c98901641a009890590ddc1354c0f294e5e@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
This follows on the change ("regulator: Set PROBE_PREFER_ASYNCHRONOUS
for drivers that existed in 4.14") but changes regulators didn't exist
in Linux 4.19 but did exist in Linux 5.4.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230316125351.3.I45bf925ca9537da5f647e2acb0ad207c0c98af81@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
This follows on the change ("regulator: Set PROBE_PREFER_ASYNCHRONOUS
for drivers that existed in 4.14") but changes regulators didn't exist
in Linux 4.14 but did exist in Linux 4.19.
NOTE: from a quick "git cherry-pick" it looks as if
"bd718x7-regulator.c" didn't actually exist in v4.19. In 4.19 it was
named "bd71837-regulator.c". See commit 2ece646c90 ("regulator:
bd718xx: rename bd71837 to 718xx")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230316125351.2.Iad1f25517bb46a6c7fca8d8c80ed4fc258a79ed9@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
