I.MX MU supports generating IRQs by writing to a register.
Describe its use as a MSI controller so that other blocks (such as a PCI EP)
can use it directly.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[maz: commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220922161246.20586-5-Frank.Li@nxp.com
As a user recently noted, the qcom,bam-dma binding document
describes the msm8974 BAM DMA node in the 'example section'
incorrectly. Fix the same by making it consistent with the node
present inside 'qcom-msm8974' dts file, namely the 'reg' and
'interrupt' values which are incorrect in the 'example section'.
While at it also make two additioanal minor cleanups:
- mention Bjorn's new email ID in the document, and
- add SDM845 in the comment line for the SoCs on which
qcom,bam-v1.7.0 version is supported.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220926112200.1948080-1-bhupesh.sharma@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
remove the double word to.
Signed-off-by: Deming Wang <wangdeming@inspur.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20220920020721.2190-1-wangdeming@inspur.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This is same scheme as fixed-regulator.
Without that property used, the parent regulator can be shut down (if not an always on).
Thus leading to inappropriate behavior:
On am62-SP-SK this fix is required to avoid tps65219 ldo1 (SDMMC rail) to be shut down after boot completion.
Signed-off-by: Jerome Neanne <jneanne@baylibre.com>
Link: https://lore.kernel.org/r/20220929132526.29427-3-jneanne@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the following warning in dtbs_check
interrupt-controller@a00000: Unevaluated properties are not allowed ('reg' was unexpected)
Add the reg property in the schema.
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220819190729.32358-4-a-nandan@ti.com
ti,sci-inta nodes, or else we will have following warning when building
device tree files with W=2 warning level.
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi:147.51-156.5: Warning (interrupt_provider): /bus@100000/main-navss/interrupt-controller@33d00000: Missing #interrupt-cells in interrupt provider
And further, #interrupt-cells is required to be in yaml bindings as well
to prevent following schema warnings:
k3-j721e-common-proc-board.dtb: interrupt-controller@33d00000: Unevaluated properties are not allowed ('#interrupt-cells' was unexpected)
>From schema: linux/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml
Add #interrupt-cells property in ti,sci-inta.yaml
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220819190729.32358-2-a-nandan@ti.com
Document support for the Direct Memory Access Controllers (DMAC) in the
Renesas R-Car V4H (R8A779G0) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/0a4d40092a51345003742725aea512a815d27e89.1664204526.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The Snapdragon 670 uses the QUSB driver for USB 2.0. Document the
compatible used in the device tree.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220922024656.178529-2-mailingradian@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Improvements in Synopsys DesignWare Universal Multi-Protocol Memory
Controller Devicetree bindings. The bindings are being split into
one related to Synopsys core and into quite different derivative Zynq
A05 DDR Memory Controller. Extend the Synopsys bindings with additional
properties to match upcoming new device support (Baikal-T1 support).
-----BEGIN PGP SIGNATURE-----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=SQZl
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=1MoR
-----END PGP SIGNATURE-----
Merge tag 'memory-controller-drv-6.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers
Memory controller drivers for v6.1, part 2
Improvements in Synopsys DesignWare Universal Multi-Protocol Memory
Controller Devicetree bindings. The bindings are being split into
one related to Synopsys core and into quite different derivative Zynq
A05 DDR Memory Controller. Extend the Synopsys bindings with additional
properties to match upcoming new device support (Baikal-T1 support).
* tag 'memory-controller-drv-6.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
dt-bindings: memory: snps,dw-umctl2-ddrc: Extend schema with IRQs/resets/clocks props
dt-bindings: memory: snps,dw-umctl2-ddrc: Replace opencoded numbers with macros
dt-bindings: memory: snps,dw-umctl2-ddrc: Use more descriptive device name
dt-bindings: memory: synopsys,ddrc-ecc: Detach Zynq DDRC controller support
Link: https://lore.kernel.org/r/20220926105023.119781-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
DSI support for rk356x, display-gamma-control for rk3399, display
output for quartz64-b and rk3566-roc-pc, hdmi supplies for rk3399-roc-pc,
some pinctrl improvements for the px30-evb and a number of changes to
bring rk3399 rock4 and rock-pi4 structure closer to names used in schematics.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmMvDVkQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgdM7B/0XJOFHfOczgScJ/U0lGKOSdyunaBKxjzJ5
Hdz9Zy7SaW0NztHJA8F5TY+Llw6VKR0jULhcJ/HFxQlAlVKlLyQBpL0K71+9evo/
3EKugxgwWTXVUeCycVRIBcHTCB0F2lrITCTudTyA3C+sJWOOX9NJyccQXnwFtf/D
ScQpIEXGB6/iiU9mTup/JY48HiojnXeJLQsXGos+4D+nY9Pm+KwKhpGlBLvNjf/D
wvmGJTgcuDkoXoPHQ15vvUjUbYrqIIehV7s3zKJSTVjZ7upOcDXsnN/CZBtrYiac
HghziTm5Bn66aNY2Q5/iQ8u3a5Vgxx7+li1SR3+iwCr1YERIDjEA
=nNLu
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmM0re0ACgkQmmx57+YA
GNk5pw/9EShdi6HdhH60llnYSH3tAwnLFNUCKkQ0ZrDyINRcGLCyiEgxayy1pVyU
zc6yTlpH1Irjc3nv5pNPme8mOItw5V78Jb04rA1g/Oie/hQ/hLA6JOP86fzdiDEN
Rbt24llOSExStEBePBFwV87Adt60K6HCIE5MNfX+qW97YMpacyiTSbbee19AcliN
mhYskbZPmuMSO3yMYkHYbJa9yzYqxq+ccipz8AcJFLXvlTIrM/MfgYSp+zCHnaRW
/6r0ApfA7FvUXMkBKXNeAL4yh5jKmfFB+wQuYY9z0AvB53oBxGKmDubMrY3IdT2Q
LBaoiIQG/5oz3DBWRZe9RxWusIyacgyInaNBcAYiPMnInb2dL9XCgMlOemPRTQLO
NavC1cA+TXXAMmgISTnGFeVCYcIY8F8KkfWWAobpjnzKrdic6axncl8eiAK80JOT
yM6yS7lDnWtIWCUq4zgkJxCnFD4PtUHOwusz0wurrwiSz5TveESKDyOnQ6evSqry
ka6UdN2DtX8Dd7c6vTtu0labY8o2Qdz6r2N+ooRAhaujhh9tYA59Yxrp9pV8cwJe
ysHvbJBJLpE/lEbHYNPWqz2lOyPJ+JWj9s3aPn7jDv+gOxmP8z1NdbTVpcSRJj0B
T4c6cMoQ6PyF5P11vUg7nKJ0JNH8/dUYUgPur/qL60O6JIbiFXE=
=oYll
-----END PGP SIGNATURE-----
Merge tag 'v6.1-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
RK3399-Nanopi-R4S-enterprise as variant board, Gru-Scarlet SKU variants,
DSI support for rk356x, display-gamma-control for rk3399, display
output for quartz64-b and rk3566-roc-pc, hdmi supplies for rk3399-roc-pc,
some pinctrl improvements for the px30-evb and a number of changes to
bring rk3399 rock4 and rock-pi4 structure closer to names used in schematics.
* tag 'v6.1-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: use pin constant for reset-gpios on px30-evb
arm64: dts: rockchip: add pinctrl for mipi-pdn pin on px30-evb
arm64: dts: rockchip: set max drive-strength for cif_clkout_m0 on px30-evb
arm64: dts: rockchip: add avdd-0v9-supply and avdd-1v8-supply on rk3399 rock 4c and pi4
arm64: dts: rockchip: sort nodes/properties on rk3399-rock-4
arm64: dts: rockchip: fix regulator name on rk3399-rock-4
arm64: dts: rockchip: sort nodes/properties on rk3399-rock-4c-plus
arm64: dts: rockchip: fix regulator structure on rk3399-rock-4c-plus
arm64: dts: rockchip: connect vcca_1v8 to APIO5_VDD on rk3399-rock-4c-plus
arm64: dts: rockchip: Add DSI and DSI-DPHY nodes to rk356x
arm64: dts: rockchip: Enable HDMI and GPU on quartz64-b
arm64: dts: rockchip: Add RK3399 NanoPi R4S Enterprise Edition
dt-bindings: Add doc for FriendlyARM NanoPi R4S Enterprise Edition
arm64: dts: rockchip: add i2s0 I2S/PDM/TDM 8ch controller to px30
arm64: dts: rockchip: Add HDMI supplies on rk3399-roc-pc
arm64: dts: rockchip: Support gru-scarlet sku{2,4} variants
dt-bindings: arm: rockchip: Add gru-scarlet sku{2,4} variants
arm64: dts: rockchip: enable gamma control on RK3399
arm64: dts: rockchip: Enable video output on rk3566-roc-pc
Link: https://lore.kernel.org/r/38114097.10thIPus4b@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fix the indentation in the binding example. There're two redudant space
charactors need to be removed.
Fixes: 76f52f815f1a ("dt-bindings: mfd: Add MediaTek MT6370")
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/1663295929-9024-1-git-send-email-u0084500@gmail.com
Commit 7677ed11e9 ("dt-bindings: mfd: qcom,tcsr: Convert to dtschema")
converted bindings to DT schema literally - including the
qcom,tcsr-ipq6018 expecting syscon and simple-mfd. Such configuration
is not used in DTS and there is no actual need of it. The TCSR block is
purely configuration block and should not have children. Any child
device should be simply moved outside of TCSR syscon block.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220909091056.128949-1-krzysztof.kozlowski@linaro.org
Commit 5621d3977e29 ("dt-bindings: mfd: Add missing (unevaluated|
additional)Properties on child nodes") exposed a flaw in the original
binding, where "merged" versions of some regulators were missing,
leading to warnings on the HiFive Unmatched Devicetree.
Add the missing patterns (and merge some of the trivial ones).
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220916190009.2292223-1-conor@kernel.org
Add bindings for Unisoc system global register which provide register map
for clocks.
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220909152421.278662-2-gengcixi@gmail.com
Document rk3588 compatible for QoS registers.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220906143825.199089-5-sebastian.reichel@collabora.com
Document the compatible for pm7250b that is used with e.g. sm6350.
Also while we're at it, sort the compatibles alphabetically.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220902111055.106814-1-luca.weiss@fairphone.com
In order to ensure only documented properties are present, node schemas
must have unevaluatedProperties or additionalProperties set to false
(typically).
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220823145649.3118479-4-robh@kernel.org
Create dt-binding documentation to document rk817 battery and charger
usage. New device-tree properties have been added.
- rockchip,resistor-sense-micro-ohms: The value in microohms of the
sample resistor.
- rockchip,sleep-enter-current-microamp: The value in microamps of the
sleep enter current.
- rockchip,sleep-filter-current: The value in microamps of the sleep
filter current.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220827021623.23829-2-macroalpha82@gmail.com
Document existing (MSM8996, SC7280) and new compatibles for TCSR syscon
registers (QCS404, SC7180, SDM630, SDM845, SM8150, MSM8998).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220819083209.50844-2-krzysztof.kozlowski@linaro.org
There are two bindings for Qualcomm SPMI PMIC Thermal Monitoring ADC:
one for ADC HC and one for ADC TM5 and TM7. PM8998 uses the former one,
so fix matching of child schema:
qcom/msm8998-asus-novago-tp370ql.dtb: pmic@0: adc-tm@3400:compatible:0: 'qcom,spmi-adc-tm-hc' is not one of ['qcom,spmi-adc-tm5', 'qcom,spmi-adc-tm5-gen2', 'qcom,adc-tm7']
Fixes: 3f5117be95 ("dt-bindings: mfd: convert to yaml Qualcomm SPMI PMIC")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220828084341.112146-15-krzysztof.kozlowski@linaro.org
The regulators node of Qualcomm SPMI PMIC represents sub-device, so it
has its own compatible, multiple regulators and uses dedicated bindings.
Fixes: 3f5117be95 ("dt-bindings: mfd: convert to yaml Qualcomm SPMI PMIC")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220828084341.112146-14-krzysztof.kozlowski@linaro.org
Add a more complete example with PM6150 to provide better validation of
the bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220828130113.5845-1-krzysztof.kozlowski@linaro.org
The syscon bindings require a device specific compatible, beside the
"syscon". However schema counts "simple-mfd" as such, which allows
simple-mfd+syscon to sneak in.
Adjust the match to be sure simple-mfd also comes with a device specific
compatible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220817142246.828762-5-krzysztof.kozlowski@linaro.org
Conversion from TXT to DT schema lost several compatibles.
Fixes: 3f5117be95 ("dt-bindings: mfd: convert to yaml Qualcomm SPMI PMIC")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: David Heidelberg <david@ixit.cz>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220828065123.39734-1-krzysztof.kozlowski@linaro.org
The System Control Processor System (SCPSYS) has several power
management related tasks in the system. Add the bindings for it.
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220811025813.21492-7-tinghan.shen@mediatek.com
Convert the aspeed,ast2[456]00-scu binding to DT schema format.
The original binding was missing '#address-cells', '#size-cells',
'ranges', and child nodes, so add them.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220810161635.73936-3-robh@kernel.org
AXP228 is a PMIC used on boards such as the Clockwork ClockworkPi and
DevTerm. Its register map appears to be identical to the AXP221 variant.
The only known difference is in the default values for regulator on/off
states and voltages.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220810013430.27061-1-samuel@sholland.org
The interrupt router has 32 inputs, and up to 15 outputs connected to
the MIPS CPU's interrupts. The way these are mapped to each other is
runtime configurable. This controller can also mask individual interrupt
sources, and has a status register to indicate pending interrupts. This
means the controller is not transparent, and the use of "interrupt-map"
inappropriate. Instead, a list of parent interrupts should be specified.
Two-part compatibles are introduced to be able to require "interrupts"
for new devicetrees. For backward compatibility "interrupt-map" is still
allowed on these new compatibles, but deprecated. The old compatible,
with required "interrupt-map" and "#address-cells", is also deprecated.
The relevant descriptions are added or extended to more clearly describe
the functionality of this controller.
To prevent spurious changes to the binding when more SoCs are added,
"allOf" is used with one "if", and the compatible enum only has one
item.
The example is updated to provide a correct example for RTL8380 SoCs.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/ba3ae8e521ef82dd94f18a602ef53078f4a0d8d5.1663617425.git.sander@svanheule.net
These bindings describe the POWER processor On Chip Controller accessed
from a service processor or baseboard management controller (BMC).
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20220809200701.218059-2-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
pipegmux and SuperSpeed are the proper spelling for those terms.
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220921153155.279182-1-ahalaney@redhat.com
Add device tree bindings for global clock controller for SM6375 SoCs.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220921001303.56151-2-konrad.dybcio@somainline.org
Document AMD DaytonaX board compatible.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220921210950.10568-2-aladyshev22@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
msm-next for v6.1
DPU:
- simplified VBIF configuration
- cleaned up CTL interfaces to accept indices rather than flush masks
DSI:
- removed unused msm_display_dsc_config struct
- switch regulator calls to new bulk API
- switched to use PANEL_BRIDGE for directly attached panels
DSI PHY:
- converted drivers to use parent_hws instead of parent_names
DP:
- cleaned up pixel_rate handling
HDMI PHY:
- turned hdmi-phy-8996 into OF clk provider
core:
- misc dt-bindings fixes
- choose eDP as primary display if it's available
- support getting interconnects from either the mdss or the mdp5/dpu
device nodes
gpu+gem:
- Shrinker + LRU re-work:
- adds a shared GEM LRU+shrinker helper and moves msm over to that
- reduces lock contention between retire and submit by avoiding the
need to acquire obj lock in retire path (and instead using resv
seeing obj's busyness in the shrinker
- fix reclaim vs submit issues
- GEM fault injection for triggering userspace error paths
- Map/unmap optimization
- Improved robustness for a6xx GPU recovery
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsrfrr9v1oR9S4oYfOs9jm=jbKQiwPBTrCRHrjYerJJFA@mail.gmail.com
BlueField customers have to use the BlueField firmware with
UEFI ACPI tables so there is no need to have device tree
support in the i2c-mlxbf.c driver. Remove the device tree
binding documentation as well.
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The icicle kit reference design's v2022.09 release made some changes
to the memory map - including adding the ability to read the fabric
clock controllers via the system controller bus & making the PCI
controller work with upstream Linux.
While the PCI was not working in the v2022.03 design, so nothing is
broken there in terms of backwards compatibility, the fabric clocks
used in the v2022.03 design were chosen by the individual run of the
synthesis tool. In the v2022.09 reference design, the clocks are fixed
to use the "north west" fabric Clock Conditioning Circuitry.
In the v2022.10 release, the memory map on the DDR side is also
changing, so to avoid making a breaking change here twice, jump over the
v2022.09 release and straight to the v2022.10 one.
Make use of a new compatible to denote that v2022.{09,10} reference
design releases are not backwards compatible.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
The Snapdragon 670 uses the RPMh mailbox for some clocks. Document its
support.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220920223734.151135-2-mailingradian@gmail.com
Add a make target, dt_compatible_check, to extract compatible strings
from kernel sources and check if they are documented by a schema.
At least version v2022.08 of dtschema with dt-check-compatible is
required.
This check can also be run manually on specific files or directories:
scripts/dtc/dt-extract-compatibles drivers/clk/ | \
xargs dt-check-compatible -v -s Documentation/devicetree/bindings/processed-schema.json
Currently, there are about 3800 undocumented compatible strings. Most of
these are cases where the binding is not yet converted (given there
are 1900 .txt binding files remaining).
Link: https://lore.kernel.org/all/20220916012510.2718170-1-robh@kernel.org/
Signed-off-by: Rob Herring <robh@kernel.org>
The Snapdragon 670 supports eMMC with an SDHCI controller. Add the
appropriate compatible to the documentation.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220923014322.33620-2-mailingradian@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
SoC MT7621 SPI bindings used text format, so migrate them to YAML.
There are some additions to the binding that were not in the original
file. This binding is used in MT7621 and MT7628a Ralink SoCs. To
properly match both dts nodes in tree we need to add to the schema
'clocks', 'clock-names' and 'reset-names'. Both 'clock-names' and
'reset-names' use 'spi' as string so maintain that as const in
the schema.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20220927031929.807070-1-sergio.paracuellos@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is expected that the SAI subnodes would contain audio OF graph port
with endpoint to link it with the other side of audio link. Document
the port: property.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://lore.kernel.org/r/20220927002004.685108-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
ath.git patches for v6.1. Major changes:
ath11k
* cold boot calibration support on WCN6750
* Target Wake Time (TWT) debugfs support for STA interface
* support to connect to a non-transmit MBSSID AP profile
* enable remain-on-channel support on WCN6750
* implement SRAM dump debugfs interface
* enable threaded NAPI on all hardware
* WoW support for WCN6750
* support to provide transmit power from firmware via nl80211
* support to get power save duration for each client
* spectral scan support for 160 MHz
wcn36xx
* add SNR from a received frame as a source of system entropy
Emails to codeaurora.org bounce ("Recipient address rejected:
undeliverable address: No such user here.").
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220924081329.15141-1-krzysztof.kozlowski@linaro.org
Add device tree bindings for display clock controller for
Qualcomm Technology Inc's SM6115 SoC.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
[bjorn: Minor fix of binding description]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220911164635.182973-2-a39.skl@gmail.com
MIPS CPU interrupt controller bindings used text format, so migrate them
to YAML.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220921072405.610739-1-sergio.paracuellos@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
SoC MT7621 I2C bindings used text format, so migrate them to YAML.
There are some additions to the binding that were not in the original
txt file. This binding is used in MT7621 and MT7628a Ralink SoCs. To
properly match both dts nodes in tree we need to add to the schema
'clocks', 'clock-names' and 'reset-names'. Both 'clock-names' and
'reset-names' use 'i2c' as string so maintain that as const in
the schema. Also, Properly update MAINTAINERS file to align the
changes.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220920052050.582321-1-sergio.paracuellos@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
i.MX8MQ has pgc 'power-domain@a', so correct patternProperties
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220923075427.985504-1-peng.fan@oss.nxp.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the binding that describes the virtio-pci based IOMMU to DT
schema. Change the compatible string to "pci<vendor>,<device>", which is
defined by the PCI Bus Binding, but keep "virtio,pci-iommu" as an option
for backward compatibility.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220923074435.420531-1-jean-philippe@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Since the Armv7 and Armv8 architected timers are compatible, it is valid
to expose a devicetree node with compatible string "arm,armv8-timer"
followed by "arm,armv7-timer". For example a 32-bit guest running on a
64-bit machine may look for the v7 string even though the hardware is v8.
VMMs such as QEMU and kvmtool have been using this compatible string for
some time. Clean up the compatible list a little and add the dual
option.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220922161149.371565-1-jean-philippe@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Add compatible string for RV1126 gmac, and constrain it to
be compatible with Synopsys dwmac 4.20a.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Signed-off-by: Anand Moon <anand@edgeble.ai>
Link: https://lore.kernel.org/r/20220920140944.2535-1-anand@edgeble.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The clocks currently listed in clocks and clock-names are the ones
supplied by this clock controller, not the ones it consumes. Replace
them with the only clock it consumes - the on-board oscillator (XO),
and make the properties required.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220621160621.24415-6-y.oudjana@protonmail.com
Kryo240 is found in SM4250, the slower sibling of the SM6115.
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220919180618.1840194-3-iskren.chernev@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
The QEMU devicetree uses a different order for SMMUv3 interrupt names,
and there isn't a good reason for enforcing a specific order. Since all
interrupt lines are optional, operating systems should not expect a
fixed interrupt array layout; they should instead match each interrupt
to its name individually. Besides, as a result of commit e4783856a2
("dt-bindings: iommu: arm,smmu-v3: make PRI IRQ optional"), "cmdq-sync"
and "priq" are already permutable. Relax the interrupt-names array
entirely by allowing any permutation, incidentally making the schema
more readable.
Note that dt-validate won't allow duplicate names here so we don't need
to specify maxItems or add additional checks, it's quite neat.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220916133145.1910549-1-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
We need the USB fixes in here for other follow-on changes to be able to
be applied successfully.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Document the MediaTek Helio X10 (MT6795) bindings for the apmixedsys,
infracfg, topckgen, pericfg and mmsys system controllers.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220921091455.41327-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Normal mixed bag of new device support with continuing trend that most new
devices are supported by extending existing drivers - a positive sign perhaps
that device manufacturers have somewhat stabilized their interfaces across
product generations. The BNO055 driver was however a substantial addition
including several additions to the IIO core.
There are a number of significant patch sets under review, so if the 6.0
cycle runs long I may send a 3rd pull request.
New device support
* adi,adxl313
- Support for the ADXL312 and ADXL314 accelerometers.
* bosch,bmp280
- Support for the BMP380 family of pressures sensors.
Included considerable refactoring and modernization of the bmp280
driver.
* bosch,bno055
- New driver for this i2c/serial attached complex IMU.
* lltc,ltc2497
- Support for the LTC2499 16 channel, 24bit ADC.
* st,pressure
- Support for the LPS22DF pressure sensor
* st,lsm6dsx
- Support for the LSM6DSTX (Mainly adding the ID and WAI)
Features
* core - to support the bosch,bno055 requirements
- Support for linear acceleration channel type (effect of gravity removed)
- Pitch, yaw and roll modifiers for angle channels.
- Standard serialnumber attribute documentation.
- Binary attributes - to allow for calibration save and restore.
* adi,ad7923
- Support extended range (wider supported input voltage range).
* bosch,bmp280
- Add filter controls for some supported parts.
* microchip,mcp3911
- Buffered capture support for this ADC.
- Data ready interrupt support, including hiz control for line.
- Oversampling ratio support.
* st,stm32-adc
- Support ID registers on parts where they are present, providing
discoverability of some features.
Fixes - late breaking fixes that I judged could wait for the merge window.
* adi,ad5593r
- Add a missing STOP condition between address write and data read.
- Check for related i2c functionality.
* adi,ad7923
- Fix shift reporting for some variants supported by the driver.
* infinion,dps310
- Work around a hardware issue where a chip can hang by adding a
timeout and reset path.
Cleanups
* Continuing work to switch to new pm macros.
* MAINTAINERS
- Drop duplication of wild card covered entry in ADI block and
add missing entries to cover ltc294x binding files.
* bosch,bma400
- Fix trivial smatch warning.
* bosch,bmp280
- Fix broken links to datasheets
* lltc,ltc2497
- Fix missing entry for ltc2499
* mexelis,mlx90614
- Switch to get_avail() callback for _available attributes.
* microchip,mcp3911
- Move to devm_ resource management for all elements of probe()
-----BEGIN PGP SIGNATURE-----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=q/TD
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.1b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
Second set of IIO new device support, features and cleanup for the 6.1 cycle.
Normal mixed bag of new device support with continuing trend that most new
devices are supported by extending existing drivers - a positive sign perhaps
that device manufacturers have somewhat stabilized their interfaces across
product generations. The BNO055 driver was however a substantial addition
including several additions to the IIO core.
There are a number of significant patch sets under review, so if the 6.0
cycle runs long I may send a 3rd pull request.
New device support
* adi,adxl313
- Support for the ADXL312 and ADXL314 accelerometers.
* bosch,bmp280
- Support for the BMP380 family of pressures sensors.
Included considerable refactoring and modernization of the bmp280
driver.
* bosch,bno055
- New driver for this i2c/serial attached complex IMU.
* lltc,ltc2497
- Support for the LTC2499 16 channel, 24bit ADC.
* st,pressure
- Support for the LPS22DF pressure sensor
* st,lsm6dsx
- Support for the LSM6DSTX (Mainly adding the ID and WAI)
Features
* core - to support the bosch,bno055 requirements
- Support for linear acceleration channel type (effect of gravity removed)
- Pitch, yaw and roll modifiers for angle channels.
- Standard serialnumber attribute documentation.
- Binary attributes - to allow for calibration save and restore.
* adi,ad7923
- Support extended range (wider supported input voltage range).
* bosch,bmp280
- Add filter controls for some supported parts.
* microchip,mcp3911
- Buffered capture support for this ADC.
- Data ready interrupt support, including hiz control for line.
- Oversampling ratio support.
* st,stm32-adc
- Support ID registers on parts where they are present, providing
discoverability of some features.
Fixes - late breaking fixes that I judged could wait for the merge window.
* adi,ad5593r
- Add a missing STOP condition between address write and data read.
- Check for related i2c functionality.
* adi,ad7923
- Fix shift reporting for some variants supported by the driver.
* infinion,dps310
- Work around a hardware issue where a chip can hang by adding a
timeout and reset path.
Cleanups
* Continuing work to switch to new pm macros.
* MAINTAINERS
- Drop duplication of wild card covered entry in ADI block and
add missing entries to cover ltc294x binding files.
* bosch,bma400
- Fix trivial smatch warning.
* bosch,bmp280
- Fix broken links to datasheets
* lltc,ltc2497
- Fix missing entry for ltc2499
* mexelis,mlx90614
- Switch to get_avail() callback for _available attributes.
* microchip,mcp3911
- Move to devm_ resource management for all elements of probe()
* tag 'iio-for-6.1b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (57 commits)
iio: adc: mcp3911: add support for oversampling ratio
dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry
iio: adc: mcp3911: add support for interrupts
iio: adc: mcp3911: add support for buffers
iio: adc: mcp3911: use resource-managed version of iio_device_register
iio: accel: bma400: Fix smatch warning based on use of unintialized value.
iio: light: st_uvis25: Use EXPORT_NS_SIMPLE_DEV_PM_OPS()
iio: accel: bmi088: Use EXPORT_NS_GPL_RUNTIME_DEV_PM_OPS() and pm_ptr()
iio: proximity: srf04: Use pm_ptr() to remove unused struct dev_pm_ops
iio: proximity: sx9360: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
iio: proximity: sx9324: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
iio: proximity: sx9310: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
docs: iio: add documentation for BNO055 driver
iio: imu: add BNO055 I2C driver
iio: imu: add BNO055 serdev driver
dt-bindings: iio/imu: Add Bosch BNO055
iio: document "serialnumber" sysfs attribute
iio: document bno055 private sysfs attributes
iio: imu: add Bosch Sensortec BNO055 core driver
iio: add support for binary attributes
...
Document compatibles for QFPROM used on IPQ8064 and SDM630. They are
compatible with generic QFPROM fallback.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220916122100.170016-7-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert the Samsung Exynos SoC G-Scaler bindings to DT schema.
Changes done during conversion:
1. A typical (already used) properties like clocks, iommus and
power-domains.
2. Require clocks, because they are essential for the block to operate.
3. Describe the differences in clocks between the Exynos5250/5420 and
the Exynos5433 G-Scalers. This includes the fifth Exynos5433 clock
"gsd" (GSCL Smart Deck) which was added to the DTS, but not to the
bindings and Linux driver. Similarly to Exynos5433 DECON change [1],
the clock should be used.
[1] https://lore.kernel.org/all/6270db2d-667d-8d6f-9289-be92da486c25@samsung.com/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Convert Dongwoon Anatech DW9714 camera voice coil lens driver to DT
schema and extend the bindings with vcc-supply (already used by driver)
and powerdown-gpios (based on datasheet, not used by the driver).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Change SPDX-License-Identifier to (GPL-2.0+ OR MIT)
for Rockchip clock bindings.
Cc: Heiko Stübner <heiko@sntech.de>
Cc: Elaine Zhang <zhangqing@rock-chips.com>
Cc: Xing Zheng <zhengxing@rock-chips.com>
Cc: Jeffy Chen <jeffy.chen@rock-chips.com>
Cc: Finley Xiao <finley.xiao@rock-chips.com>
Cc: Andy Yan <andy.yan@rock-chips.com>
Cc: Shawn Lin <shawn.lin@rock-chips.com>
Cc: Eric Engestrom <eric@engestrom.ch>
Cc: Mylène Josserand <mylene.josserand@collabora.com>
Cc: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Eric Engestrom <eric@engestrom.ch>
Acked-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20c6a502-2ff5-bdb1-fb4f-0741f3a2c19c@gmail.com
[Rockchip Ack/request for dual licensing dt-bindings at
https://lore.kernel.org/all/510d1180-bc8e-7820-c772-ed7f35447087@rock-chips.com/]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This adds a new compatible string for Elan eth3915n touchscreen controller,
which is compatible with ekth3500.
Signed-off-by: Yunlong Jia <ecs.beijing2022@gmail.com>
Suggested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20220923083657.v5.2.Ic4e8f03868f88b8027a81bc3d414bae68978e6b7@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The icc-bwmon driver is expected to support measuring LLCC/DDR bandwidth
on SDM845 and SC7280.
The LLCC driver is extended to provide per-platform register mappings to
the LLCC EDAC driver. The QMI encoder/decoder is updated to allow the
passed qmi_elem_info to be const.
Support for SDM845 is added to the sleep stats driver. Power-domains for
the SM6375 platform is added to RPMPD and the platform is added to
socinfo, together with the PM6125 pmic id.
A couple of of_node reference issues are corrected in the smem state and
smsm drivers.
The Qualcomm SCM driver binding is converted to YAML.
-----BEGIN PGP SIGNATURE-----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=R/5I
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=GSE8
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for 6.1
The icc-bwmon driver is expected to support measuring LLCC/DDR bandwidth
on SDM845 and SC7280.
The LLCC driver is extended to provide per-platform register mappings to
the LLCC EDAC driver. The QMI encoder/decoder is updated to allow the
passed qmi_elem_info to be const.
Support for SDM845 is added to the sleep stats driver. Power-domains for
the SM6375 platform is added to RPMPD and the platform is added to
socinfo, together with the PM6125 pmic id.
A couple of of_node reference issues are corrected in the smem state and
smsm drivers.
The Qualcomm SCM driver binding is converted to YAML.
* tag 'qcom-drivers-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (29 commits)
soc: qcom: rpmpd: Add SM6375 support
dt-bindings: power: rpmpd: Add SM6375 power domains
firmware: qcom: scm: remove unused __qcom_scm_init declaration
dt-bindings: power: qcom,rpmpd: drop non-working codeaurora.org emails
soc: qcom: icc-bwmon: force clear counter/irq registers
soc: qcom: icc-bwmon: add support for sc7280 LLCC BWMON
dt-bindings: interconnect: qcom,msm8998-bwmon: Add support for sc7280 BWMONs
soc: qcom: llcc: Pass LLCC version based register offsets to EDAC driver
soc: qcom: llcc: Rename reg_offset structs to reflect LLCC version
soc: qcom: qmi: use const for struct qmi_elem_info
soc: qcom: icc-bwmon: remove redundant ret variable
dt-bindings: soc: qcom: stats: Document SDM845 compatible
soc: qcom: stats: Add SDM845 stats config and compatible
dt-bindings: firmware: document Qualcomm SM6115 SCM
soc: qcom: Make QCOM_RPMPD depend on OF
dt-bindings: firmware: convert Qualcomm SCM binding to the yaml
soc: qcom: socinfo: Add PM6125 ID
soc: qcom: socinfo: Add an ID for SM6375
soc: qcom: smem_state: Add refcounting for the 'state->of_node'
soc: qcom: smsm: Fix refcount leak bugs in qcom_smsm_probe()
...
Link: https://lore.kernel.org/r/20220921155753.1316308-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- add support for mt8188
SVS:
- several driver cleanups
power-domain:
- several cleanups of the dt-bindings and driver
mutex:
- add support to mt6795 disp mutex
- add support for mt8186 mdp3 mutex
-----BEGIN PGP SIGNATURE-----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=VKXT
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=64Bh
-----END PGP SIGNATURE-----
Merge tag 'v6.0-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers
pmic-wrapper:
- add support for mt8188
SVS:
- several driver cleanups
power-domain:
- several cleanups of the dt-bindings and driver
mutex:
- add support to mt6795 disp mutex
- add support for mt8186 mdp3 mutex
* tag 'v6.0-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
soc: mediatek: Add mmsys func to adapt to dpi output for MT8186
soc: mediatek: mutex: Add support for MT6795 Helio X10 display mutex
dt-bindings: soc: mediatek: Add display mutex support for MT6795
soc: mediatek: mutex: Add mt8186 mutex mod settings for mdp3
dt-bindings: soc: mediatek: Add mdp3 mutex support for mt8186
soc: mediatek: pm-domains: Simplify some error message
soc: mediatek: mtk-svs: Explicitly include bitfield header
soc: mediatek: mtk-svs: Use bitfield access macros where possible
soc: mediatek: mtk-svs: Commonize t-calibration-data fuse array read
dt-bindings: power: mediatek: Update maintainer list
dt-bindings: power: mediatek: Support naming power controller node with unit address
dt-bindings: power: mediatek: Refine multiple level power domain nodes
soc: mediatek: mtk-svs: Use devm variant for dev_pm_opp_of_add_table()
soc: mediatek: mtk-svs: Drop of_match_ptr() for of_match_table
soc: mediatek: mtk-svs: Remove hardcoded irqflags
soc: mediatek: mtk-svs: Switch to platform_get_irq()
dt-bindings: soc: mediatek: pwrap: add compatible for mt8188
soc: mediatek: Let PMIC Wrapper and SCPSYS depend on OF
Link: https://lore.kernel.org/r/498fe3e5-a237-121a-d500-fbb0994906cb@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Support for Samsung Galaxy E5, E7 and Grand Max is added, with support
for both 32-bit and 64-bit variants. The Samsung Galaxy S4 Mini Value
Edition gains magnetometer support.
MSM8996-based Xiaomi devices gains descriptions of the LPG-based LEDs.
On SA8295P ADP problems arising from regulators being switched into
low-power mode is worked around by removing this ability, for now.
The onboard USB Hub on SC7180 Trogdor is finally described and a few ADC
related updates are introduced.
On SC7280 support for the CPU and LLC bwmon instances are introduced.
Soundwire, audio codecs and sound introduced for a variety of boards.
Using required-opps the USB controllers votes for a minimum corner on
VDD_CX.
The onboard USB Hub Herobrine is described. A new board, the Google
Evoker is added, as is another revision of Herobrine Villager.
On SC8280XP the USB controllers are marked as wakeup-sources, to keep
them powered during suspend. The CRD has HID devices marked as
wakeup-sources to enable resuming the system. In addition to these
changes the alternative touchpad is introduced on the Lenovo ThinkPad
X13s.
SDM845 gains RPMh stats support and the LLCC BWMON is added. For SM6350
interconnect providers and GPI DMA is introduced. A description of the
PM7280b PMIC is added to Fairphone FP4 on SM7225.
With the multi-MSI support added in the PCIe controller, SM8250 gets all
its MSI interrupts added.
UFS ICE and the second SDHCI controller is introduced on SM8450. Support
for the Sony Xperia 1 IV is introduced.
Throughout a variety of platforms the TCSR mutex syscon is replaced with
the MMIO-based binding. TCSR nodes gained proper compatibles and halt
syscon nodes are split out from the mutex ranges.
A range of fixes to align with DT bindings are introduced. Among these
are the changes to the follow the TLMM binding and suffix pinctrl states
with -state and subnodes thereof with -pins, another is a number of
changes transitioning to use -gpios and introduction of proper parent
clock references in various clock providers.
-----BEGIN PGP SIGNATURE-----
iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmMrosIVHGFuZGVyc3Nv
bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FCkkP/iuTNOUwcpz03IijhJJILfUF1aSS
o7UAadfYj4dKqvc9BGdq+A9OSDqaMmceXwbPWYZQONpHrSNVMIUxUevtrUAxOxYj
fEf4VLRk2AJ2GqtRasqQL7WOESPS1bD7rRyNg5nFD3urTTqXjkgC9XoYQk9uufPx
hLdFeEB672pi0HWiQIgk5iL36O6OEEeK6rl0/PF1y8N8GkYVln1XD7SKNs2tsDcM
0unclymdckPbhxq1tuuRWXhCUZlOWRUP8+89L14M+HT3RrtudnJ8v2jtgygtziPS
TZ+wJa2CMcIZCgQ7kBcORSiMquIHV4bGcq5UNAX0juU2CFIFIQu+VzStT80+6SsU
ATkJSl4GKw/HuJS4W0JLk73mLIhtEhqIfR7qFfiDjhGphbgRkTEdMtqG5WIKzf7D
3ourD0qs3IC+XmtkjnTykJZam9BYNFt99QBHdsjZq37rMvll7BKtEPdrKIKmzzzY
hqOv27Bt4cp2xgZ6Hoot/oSfCOSQffcHPuDzkrfsinM0ZEeDLpMW7ynIQDvw08Fs
2OMbhbP3c/onhoaEuLp9eLt+ghV58PkNvKPcWBma5oNCDvi84CRDU8HOGLbnmeDv
4haXe/Ib3OoT4+raCLYrY5fI3lf2CG9cLQVHs02apilKUQ7HiMLeH3L6vNpH9v0g
BXpu2rG+gbAgJzgH
=XT9N
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=ZHbe
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 DTS updates for 6.1
Support for Samsung Galaxy E5, E7 and Grand Max is added, with support
for both 32-bit and 64-bit variants. The Samsung Galaxy S4 Mini Value
Edition gains magnetometer support.
MSM8996-based Xiaomi devices gains descriptions of the LPG-based LEDs.
On SA8295P ADP problems arising from regulators being switched into
low-power mode is worked around by removing this ability, for now.
The onboard USB Hub on SC7180 Trogdor is finally described and a few ADC
related updates are introduced.
On SC7280 support for the CPU and LLC bwmon instances are introduced.
Soundwire, audio codecs and sound introduced for a variety of boards.
Using required-opps the USB controllers votes for a minimum corner on
VDD_CX.
The onboard USB Hub Herobrine is described. A new board, the Google
Evoker is added, as is another revision of Herobrine Villager.
On SC8280XP the USB controllers are marked as wakeup-sources, to keep
them powered during suspend. The CRD has HID devices marked as
wakeup-sources to enable resuming the system. In addition to these
changes the alternative touchpad is introduced on the Lenovo ThinkPad
X13s.
SDM845 gains RPMh stats support and the LLCC BWMON is added. For SM6350
interconnect providers and GPI DMA is introduced. A description of the
PM7280b PMIC is added to Fairphone FP4 on SM7225.
With the multi-MSI support added in the PCIe controller, SM8250 gets all
its MSI interrupts added.
UFS ICE and the second SDHCI controller is introduced on SM8450. Support
for the Sony Xperia 1 IV is introduced.
Throughout a variety of platforms the TCSR mutex syscon is replaced with
the MMIO-based binding. TCSR nodes gained proper compatibles and halt
syscon nodes are split out from the mutex ranges.
A range of fixes to align with DT bindings are introduced. Among these
are the changes to the follow the TLMM binding and suffix pinctrl states
with -state and subnodes thereof with -pins, another is a number of
changes transitioning to use -gpios and introduction of proper parent
clock references in various clock providers.
* tag 'qcom-arm64-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (136 commits)
arm64: dts: qcom: sc7280: Add required-opps for USB
arm64: dts: qcom: sm8450: fix UFS PHY serdes size
arm64: dts: qcom: ipq8074: fix PCIe PHY serdes size
arm64: dts: qcom: sa8295p-adp: add missing gpio-ranges in PMIC GPIOs
arm64: dts: qcom: sa8295p-adp: add fallback compatible to PMIC GPIOs
arm64: dts: qcom: msm8996-xiaomi: align PMIC GPIO pin configuration with DT schema
arm64: dts: qcom: msm8994-msft-lumia-octagon: align resin node name with bindings
arm64: dts: qcom: pmi8994: add missing MPP compatible fallback
dt-bindings: pci: QCOM Add missing sc7280 aggre0, aggre1 clocks
arm64: dts: qcom: sc7280: Add missing aggre0, aggre1 clocks
arm64: dts: qcom: sc7280-villager: Adjust LTE SKUs
dt-bindings: arm: qcom: Adjust LTE SKUs for sc7280-villager
arm64: dts: qcom: sc7280-herobrine: Add nodes for onboard USB hub
arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub
arm64: dts: qcom: align SDHCI reg-names with DT schema
arm64: dts: qcom: sm8250: provide additional MSI interrupts
arm64: dts: qcom: msm8996: add #clock-cells and XO clock to the HDMI PHY node
arm64: dts: qcom: Use WCD9335 DT bindings
arm64: dts: qcom: msm8994: switch TCSR mutex to MMIO
arm64: dts: qcom: ipq6018: switch TCSR mutex to MMIO
...
Link: https://lore.kernel.org/r/20220921234854.1343238-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Adds device tree bindings for the MGBE found on Tegra234 SoCs, as well
as stream IDs for the shared host1x context devices.
-----BEGIN PGP SIGNATURE-----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=fXO9
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=PY4Y
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.1-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
dt-bindings: Changes for v6.1-rc1
Adds device tree bindings for the MGBE found on Tegra234 SoCs, as well
as stream IDs for the shared host1x context devices.
* tag 'tegra-for-6.1-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: Add Host1x context stream IDs on Tegra234
dt-bindings: net: Add Tegra234 MGBE
Link: https://lore.kernel.org/r/20220916101957.1635854-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The SDM670 uses RPMh for managing the PM660 and PM660L. Document RPMh
support for the PMIC.
Link: 58064f13c0%5E%21/#F0
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220920223331.150635-2-mailingradian@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds SM8450 and SC8280XP compatible entry for LPASS TX, RX, WSA
and VA codec macros.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220906170112.1984-8-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The syscon string was introduced because the mt7621 clock driver needs to
read some registers creating a regmap from the syscon. The bindings were
added before the clock driver was properly mainlined and at first the clock
driver was using ralink architecture dependent operations rt_memc_* defined
in 'arch/mips/include/asm/mach-ralink/ralink_regs.h'.
This string is already there on the memory controller node on mt7621.dtsi.
Add syscon as a constant string on the compatible property, now that memc
became a syscon. Update the example accordingly.
Fixes: 5278e4a181 ("dt-bindings: memory: add binding for Mediatek's MT7621 SDRAM memory controller")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Expand the description of the gpio-controller property to include the
controllable pins of the MT7530 switch.
The gpio-controller property is only used for the MT7530 switch. Therefore,
invalidate it for the MT7531 switch.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the case of muxing phy0 of the MT7530 switch, the switch and the phy
will have the same address on the mdio bus, 0. This causes the ethernet
driver to fail since devices on the mdio bus cannot share an address.
Any address can be used for the switch, therefore, change the switch
address to 0x1f.
Suggested-by: Sungbo Eo <mans0n@gorani.run>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove these old mediatek bindings which are not used.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Another set of fixes for fixes for the soc tree:
- A fix for the interrupt number on at91/lan966 ethernet PHYs
- A second round of fixes for NXP i.MX series, including a couple
of build issues, and board specific DT corrections on
TQMa8MPQL, imx8mp-venice-gw74xx and imx8mm-verdin for reliability
and partially broken functionality.
- Several fixes for Rockchip SoCs, addressing a USB issue on BPI-R2-Pro,
wakeup on Gru-Bob and reliability of high-speed SD cards, among
other minor issues.
- A fix for a long-running naming mistake that prevented the moxart mmc
driver from working at all.
- Multiple Arm SCMI firmware fixes for hardening some corner cases.
-----BEGIN PGP SIGNATURE-----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=fI2K
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Another set of fixes for fixes for the soc tree:
- A fix for the interrupt number on at91/lan966 ethernet PHYs
- A second round of fixes for NXP i.MX series, including a couple of
build issues, and board specific DT corrections on TQMa8MPQL,
imx8mp-venice-gw74xx and imx8mm-verdin for reliability and
partially broken functionality
- Several fixes for Rockchip SoCs, addressing a USB issue on
BPI-R2-Pro, wakeup on Gru-Bob and reliability of high-speed SD
cards, among other minor issues
- A fix for a long-running naming mistake that prevented the moxart
mmc driver from working at all
- Multiple Arm SCMI firmware fixes for hardening some corner cases"
* tag 'soc-fixes-6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits)
arm64: dts: imx8mp-venice-gw74xx: fix port/phy validation
ARM: dts: lan966x: Fix the interrupt number for internal PHYs
arm64: dts: imx8mp-venice-gw74xx: fix ksz9477 cpu port
arm64: dts: imx8mp-venice-gw74xx: fix CAN STBY polarity
dt-bindings: memory-controllers: fsl,imx8m-ddrc: drop Leonard Crestez
arm64: dts: tqma8mqml: Include phy-imx8-pcie.h header
arm64: defconfig: enable ARCH_NXP
arm64: dts: imx8mp-tqma8mpql-mba8mpxl: add missing pinctrl for RTC alarm
ARM: dts: fix Moxa SDIO 'compatible', remove 'sdhci' misnomer
arm64: dts: imx8mm-verdin: extend pmic voltages
arm64: dts: rockchip: Remove 'enable-active-low' from rk3566-quartz64-a
arm64: dts: rockchip: Remove 'enable-active-low' from rk3399-puma
arm64: dts: rockchip: fix property for usb2 phy supply on rk3568-evb1-v10
arm64: dts: rockchip: fix property for usb2 phy supply on rock-3a
arm64: dts: imx8ulp: add #reset-cells for pcc
arm64: dts: tqma8mpxl-ba8mpxl: Fix button GPIOs
arm64: dts: imx8mn: remove GPU power domain reset
arm64: dts: rockchip: Set RK3399-Gru PCLK_EDP to 24 MHz
arm64: dts: imx8mm: Reverse CPLD_Dn GPIO label mapping on MX8Menlo
arm64: dts: rockchip: fix upper usb port on BPI-R2-Pro
...
The Devicetree nodes for FLEXCOM's USART can also have an alternative
clock source for the baudrate generator (other than the peripheral
clock), namely the Generick Clock. Thus make the binding aware of
this clock that someone may place in the clock related
properties of the USART node.
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220922113347.144383-6-sergiu.moga@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Require SAM9260 fallback compatible for SAM9X60, because SAM9X60 is
fully compatible with SAM9260 and Linux driver requires the latter.
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220922113347.144383-4-sergiu.moga@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert at91 USART DT Binding for Atmel/Microchip SoCs to
json-schema format. Furthermore, move this binding to the
serial directory, since binding directories match hardware,
unlike the driver subsystems which match Linux convention.
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220922113347.144383-3-sergiu.moga@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a new 'snps,resume-hs-terminations' DT quirk to dwc3 core to resolved
issue of CRC failed error.
On the resume path, U3/U2 exit controller fails to send proper CRC checksum
in CRC5 field. As result Transaction Error is generated. Enabling bit 10 of
GUCTL1 will correct this problem.
When this bit is set to '1', the UTMI/ULPI opmode will be changed to
"normal" along with HS terminations and term/xcvr select signals after EOR.
This option is to support certain legacy UTMI/ULPI PHYs.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Piyush Mehta <piyush.mehta@amd.com>
Link: https://lore.kernel.org/r/20220920052235.194272-2-piyush.mehta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This selects SOF/ITP to be running on ref_clk.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20220915062855.751881-2-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Snapdragon 670 has DWC3 USB support. Add a compatible to reflect
that.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Link: https://lore.kernel.org/r/20220922024656.178529-3-mailingradian@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Snapdragon 670 uses the QUSB driver for USB 2.0. Document the
compatible used in the device tree.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Link: https://lore.kernel.org/r/20220922024656.178529-2-mailingradian@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Document the binding for the Wireless Ethernet Dispatch core on the
MT7986 ethernet driver
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The Data Ready Output Pin is either hard wired to work as high
impedance or push-pull. Make it configurable.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220815061625.35568-8-marcus.folkesson@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
First of all the DW uMCTL2 DDRC IP-core supports the individual IRQ lines
for each standard event: ECC Corrected Error, ECC Uncorrected Error, ECC
Address Protection, Scrubber-Done signal, DFI Parity/CRC Error. It's
possible that the platform engineers merge them up in the IRQ controller
level. So let's add both configuration support to the DT-schema.
Secondly the DW uMCTL2 DDRC IP-core can have clock sources like APB
reference clock, AXI-ports clock, main DDRC core reference clock and
Scrubber low-power clock. In addition to that each clock domain can have a
dedicated reset signal. Let's add the properties for at least the denoted
clock sources and the corresponding reset controls.
Note the IRQs and the phandles order is deliberately not fixed since some
of the sources may be absent depending on the IP-core synthesize
parameters and the particular platform setups.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220910195659.11843-3-Sergey.Semin@baikalelectronics.ru
Xilinx ZynqMP DDRC-based example contains the opencoded numerical literals
in the IRQ lines definition. It doesn't seem justified since the
corresponding platform has well defined ARM GIC interface. Let's replace
the numbers with the corresponding macros then.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220910195659.11843-2-Sergey.Semin@baikalelectronics.ru
The DT-schema name and the corresponding generic compatible string look
inappropriate in the current DW uMCTL2 DDRC DT-bindings:
1. DT-schema name contains undefined vendor-prefix. It's supposed to be
"snps", not "synopsys".
2. DT-schema name has "ecc" suffix. That is a device property, and has
nothing to do with the controller actual name.
3. The controller name is different. It's DW uMCTL2 DDRC. Just DDRC
doesn't identify the IP-core in subject.
4. There is no much point in using the IP-core version in the device name
since it can be retrieved from the corresponding device CSR. Moreover the
DW uMCTL2 DDRC driver doesn't differentiate the IP-core version at the
current state.
In order to fix all the inconsistencies described above we suggest to
rename the DT-schema to "snps,dw-umctl2-ddrc.yaml", deprecate the
compatible string "snps,ddrc-3.80a" and define a new generic device
name as "snps,dw-umctl2-ddrc".
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220910194237.10142-16-Sergey.Semin@baikalelectronics.ru
The Zynq A05 DDRC controller has nothing in common with DW uMCTL2 DDRC:
the CSRs layout is absolutely different and it doesn't support IRQs unlike
DW uMCTL2 DDR controller of all versions (v1.x, v2.x and v3.x). Thus there
is no any reason to have these controllers described in the same bindings.
Let's split the DT-schema up.
Note since the synopsys,ddrc-ecc.yaml schema describes the Synopsys DW
uMCTL2 DDR controller only, we need to accordingly fix the device
descriptions.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220910194237.10142-15-Sergey.Semin@baikalelectronics.ru
Introduce new documentation file for the Bosch BNO055 IMU.
Signed-off-by: Andrea Merello <andrea.merello@iit.it>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220907132205.28021-12-andrea.merello@iit.it
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Document the new property to enable doubling the analog input range.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220912081223.173584-4-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Update the bindings documentation for ltc2497 to include the ltc2499.
Signed-off-by: Ciprian Regus <ciprian.regus@analog.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220916140922.2506248-3-ciprian.regus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add bosch,bmp380 compatible string for the new family of sensors.
This family includes the BMP380, BMP384 and BMP388. The register map
in this family changes substantially and introduces new features
but core concepts and operations carryover from the previous iterations
Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/67224da4ae308bb752fc8fdecc54345cedab6c21.1663025017.git.ang.iglesiasg@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Extend the adi,adxl313.yaml file with information regrding the
ADXL312 and ADXL314 devices.
Signed-off-by: George Mois <george.mois@analog.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220905132018.364900-1-george.mois@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for the ST LPS22DF, an I2C/SPI pressure sensor.
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220909161611.780720-1-martyn.welch@collabora.co.uk
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Coresight trace subsystem updates for v6.1 includes:
- Support for HiSilicon PTT trace
- Coresight cleanup of sysfs accessor functions, reduced
code size.
- Expose coresight timestamp source for ETMv4+
- DT binding updates to include missing properties
- Minor documentation, Kconfig text fixes.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
-----BEGIN PGP SIGNATURE-----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=rg+8
-----END PGP SIGNATURE-----
Merge tag 'coresight-next-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Suzuki writes:
"coresight: Changes for v6.1
Coresight trace subsystem updates for v6.1 includes:
- Support for HiSilicon PTT trace
- Coresight cleanup of sysfs accessor functions, reduced
code size.
- Expose coresight timestamp source for ETMv4+
- DT binding updates to include missing properties
- Minor documentation, Kconfig text fixes.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>"
* tag 'coresight-next-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux:
hwtracing: hisi_ptt: Fix up for "iommu/dma: Make header private"
MAINTAINERS: Add maintainer for HiSilicon PTT driver
docs: trace: Add HiSilicon PTT device driver documentation
hwtracing: hisi_ptt: Add tune function support for HiSilicon PCIe Tune and Trace device
hwtracing: hisi_ptt: Add trace function support for HiSilicon PCIe Tune and Trace device
iommu/arm-smmu-v3: Make default domain type of HiSilicon PTT device to identity
coresight: cti-sysfs: Mark coresight_cti_reg_store() as __maybe_unused
coresight: Make new csdev_access offsets unsigned
coresight: cti-sysfs: Re-use same functions for similar sysfs register accessors
coresight: Re-use same function for similar sysfs register accessors
coresight: Simplify sysfs accessors by using csdev_access abstraction
coresight: Remove unused function parameter
coresight: etm4x: docs: Add documentation for 'ts_source' sysfs interface
coresight: etm4x: Expose default timestamp source in sysfs
dt-bindings: arm: coresight-tmc: Add 'iommu' property
dt-bindings: arm: coresight: Add 'power-domains' property
coresight: docs: Fix a broken reference
coresight: trbe: fix Kconfig "its" grammar
This includes Nuno Sa's work to move the IIO core over to generic firmware
properties rather than having DT specific code paths. Combined with Andy
Shevchenko's long term work on drivers, this leaves IIO in a good state for
handling other firmware types.
New device support
- liteon,ltrf216a
* New driver and dt bindings to support this Light sensor.
- maxim,max11205
* New driver for this 16bit single channel ADC.
- memsensing,msa311
* New driver for this accelerometer. Includes a string helper for read/write.
- richtek,rtq6056
* New driver and dt binding to support this current monitor used to measure
power usage.
- yamaha,yas530
* Support the YAS537 variant (series includes several fixes for other parts
and new driver features).
Staging graduation
- adi,ad7746 CDC. Cleanup conducted against set of roadtest tests using
the posted RFC of that framework.
Features
- core
* Large rework to make all the core IIO code use generic firmware properties.
Includes switching some drivers over as well using newly provided
generic interfaces and allowing removal of DT specific ones.
* Support for gesture event types for single and double tap. Used in
bosch,bma400.
- atmel,at91-sama5d2
* Add support for temperature sensor which uses two muxed inputs to estimate
the temperature.
* Handle trackx bits of EMR register to improve temp sampling accuracy.
* Runtime PM support.
- liteon,ltrf216a
* Add a _raw channel output to allow working around an issue with
differing conversions equations that breaks some user space controls.
- mexelis,mlx90632
* Support regulator control.
- ti,tsc2046
* External reference voltage support.
Clean up and minor fixes
- Tree-wide
* devm_clk_get_enabled() replacements of opencoded equivalent.
* Remaining IIO_DMA_MINALIGN conversions (the staging/iio drivers).
* Various minor warning and similar cleanup such as missing static
markings.
* strlcpy() to strscpy() for cases where return value not checked.
* provide units.h entries for more HZ units and use them in drivers.
- dt-bindings cleanup
* Drop maintainers listss where the email address is bouncing.
* Switch spi devices over to using spi-peripheral.yaml
* Add some missing unevaluatedProperties / additionalProperties: false
entries.
- ABI docs
* Add some missing channel type specific sampling frequency entries.
* Add parameter names for callback parameters.
- MAINTAINERS
* Fix wrong ADI forum links.
- core
* lockdep class per device, to avoid an issue with nest when one IIO
device is the consumer of another.
* White space tweaks.
- asc,dlhl60d
* Use get_unaligned_be24 to avoid some unusual data manipulation and masking.
- atmel,at91-sama5d2
* Fix wrong max value.
* Improve error handling when measuring pressure and touch.
* Add locks to remove races on updating oversampling / sampling freq.
* Add missing calls in suspend and resume path to ensure state is correctly
brought up if buffered capture was in use when suspend happened.
* Error out of write_raw() callback if buffered capture enabled to avoid
unpredictable behavior.
* Handle different versions having different oversampling ratio support and
drop excess error checking.
* Cleanup magic value defines where the name is just the value and hence
hurts readability.
* Use read_avail() callback to provide info on possible oversampling ratios.
* Correctly handle variable bit depth when doing oversampling on different
supported parts. Also handle higher oversampling ratios.
- fsl,imx8qxp
* Don't ignore errors from regulator_get_voltage() so as to avoid some
very surprising scaling.
- invensense,icp10100
* Switch from UNIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS. UNIVERSAL rarely made
sense and is now deprecated. In this driver we just avoid double disabling
in some paths.
- maxim,max1363
* Drop consumer channel map provision by platform data. There have been
better ways of doing this for years and there are no in tree users.
- microchip,mcp3911
* Update status to maintained.
- qcom,spmi-adc5
* Support measurement of LDO output voltage.
- qcom,spmi-adc
* Add missing channel available on SM6125 SoC.
- st,stmpe
* Drop requirement on node name in binding now that driver correctly
doesn't enforce it.
- stx104
* Move to more appropriate addac directory
- ti,am335x
* Document ti,am654-adc compatible already in use in tree.
- ti,hmc5843
* Move dev_pm_ops out of header and use new pm macros to handle export.
- yamaha,yas530
* Minor cleanups.
-----BEGIN PGP SIGNATURE-----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=fUm6
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.1a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO new device support, features and cleanup for 6.1
This includes Nuno Sa's work to move the IIO core over to generic firmware
properties rather than having DT specific code paths. Combined with Andy
Shevchenko's long term work on drivers, this leaves IIO in a good state for
handling other firmware types.
New device support
- liteon,ltrf216a
* New driver and dt bindings to support this Light sensor.
- maxim,max11205
* New driver for this 16bit single channel ADC.
- memsensing,msa311
* New driver for this accelerometer. Includes a string helper for read/write.
- richtek,rtq6056
* New driver and dt binding to support this current monitor used to measure
power usage.
- yamaha,yas530
* Support the YAS537 variant (series includes several fixes for other parts
and new driver features).
Staging graduation
- adi,ad7746 CDC. Cleanup conducted against set of roadtest tests using
the posted RFC of that framework.
Features
- core
* Large rework to make all the core IIO code use generic firmware properties.
Includes switching some drivers over as well using newly provided
generic interfaces and allowing removal of DT specific ones.
* Support for gesture event types for single and double tap. Used in
bosch,bma400.
- atmel,at91-sama5d2
* Add support for temperature sensor which uses two muxed inputs to estimate
the temperature.
* Handle trackx bits of EMR register to improve temp sampling accuracy.
* Runtime PM support.
- liteon,ltrf216a
* Add a _raw channel output to allow working around an issue with
differing conversions equations that breaks some user space controls.
- mexelis,mlx90632
* Support regulator control.
- ti,tsc2046
* External reference voltage support.
Clean up and minor fixes
- Tree-wide
* devm_clk_get_enabled() replacements of opencoded equivalent.
* Remaining IIO_DMA_MINALIGN conversions (the staging/iio drivers).
* Various minor warning and similar cleanup such as missing static
markings.
* strlcpy() to strscpy() for cases where return value not checked.
* provide units.h entries for more HZ units and use them in drivers.
- dt-bindings cleanup
* Drop maintainers listss where the email address is bouncing.
* Switch spi devices over to using spi-peripheral.yaml
* Add some missing unevaluatedProperties / additionalProperties: false
entries.
- ABI docs
* Add some missing channel type specific sampling frequency entries.
* Add parameter names for callback parameters.
- MAINTAINERS
* Fix wrong ADI forum links.
- core
* lockdep class per device, to avoid an issue with nest when one IIO
device is the consumer of another.
* White space tweaks.
- asc,dlhl60d
* Use get_unaligned_be24 to avoid some unusual data manipulation and masking.
- atmel,at91-sama5d2
* Fix wrong max value.
* Improve error handling when measuring pressure and touch.
* Add locks to remove races on updating oversampling / sampling freq.
* Add missing calls in suspend and resume path to ensure state is correctly
brought up if buffered capture was in use when suspend happened.
* Error out of write_raw() callback if buffered capture enabled to avoid
unpredictable behavior.
* Handle different versions having different oversampling ratio support and
drop excess error checking.
* Cleanup magic value defines where the name is just the value and hence
hurts readability.
* Use read_avail() callback to provide info on possible oversampling ratios.
* Correctly handle variable bit depth when doing oversampling on different
supported parts. Also handle higher oversampling ratios.
- fsl,imx8qxp
* Don't ignore errors from regulator_get_voltage() so as to avoid some
very surprising scaling.
- invensense,icp10100
* Switch from UNIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS. UNIVERSAL rarely made
sense and is now deprecated. In this driver we just avoid double disabling
in some paths.
- maxim,max1363
* Drop consumer channel map provision by platform data. There have been
better ways of doing this for years and there are no in tree users.
- microchip,mcp3911
* Update status to maintained.
- qcom,spmi-adc5
* Support measurement of LDO output voltage.
- qcom,spmi-adc
* Add missing channel available on SM6125 SoC.
- st,stmpe
* Drop requirement on node name in binding now that driver correctly
doesn't enforce it.
- stx104
* Move to more appropriate addac directory
- ti,am335x
* Document ti,am654-adc compatible already in use in tree.
- ti,hmc5843
* Move dev_pm_ops out of header and use new pm macros to handle export.
- yamaha,yas530
* Minor cleanups.
* tag 'iio-for-6.1a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (142 commits)
iio: pressure: icp10100: Switch from UNIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS().
iio: adc: max1363: Drop provision to provide an IIO channel map via platform data
iio: accel: bma400: Add support for single and double tap events
iio: Add new event type gesture and use direction for single and double tap
iio: Use per-device lockdep class for mlock
iio: adc: add max11205 adc driver
dt-bindings: iio: adc: Add max11205 documentation file
iio: magnetometer: yamaha-yas530: Use dev_err_probe()
iio: magnetometer: yamaha-yas530: Make strings const in chip info
iio: magnetometer: yamaha-yas530: Use pointers as driver data
iio: adc: tsc2046: silent spi_device_id warning
iio: adc: tsc2046: add vref support
dt-bindings: iio: adc: ti,tsc2046: add vref-supply property
iio: light: ltrf216a: Add raw attribute
dt-bindings: iio: Add missing (unevaluated|additional)Properties on child nodes
MAINTAINERS: fix Analog Devices forum links
iio/accel: fix repeated words in comments
dt-bindings: iio: accel: add dt-binding schema for msa311 accel driver
iio: add MEMSensing MSA311 3-axis accelerometer driver
dt-bindings: vendor-prefixes: add MEMSensing Microsystems Co., Ltd.
...
DFL
- Matthew's change adds new device IDs supported by DFL.
- Dan's change uses array_size() for memory allocation to prevent
potential overflow
Microchip
- Conor's change adds MODULE_AUTHOR entry for microchip-spi driver
- Krzysztof's change refines dt-bindings
Intel m10 bmc secure update
- Russ's change adds new device ID supported by the driver
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
-----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQSgSJpClIeaArXyudb8twOBpKCM2gUCYyf//BMceWlsdW4ueHVA
aW50ZWwuY29tAAoJEPy3A4GkoIzahUABAPiC/YuHOzae2dvHJMegEBVDbvEKartV
MTqZ8a1LRUH3AQCcfJMyfm6Rb+W/URlM2K777ox6JOUbXQTNSROSpH99BA==
=C97Q
-----END PGP SIGNATURE-----
Merge tag 'fpga-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-next
Xu writes:
FPGA Manager changes for 6.1-rc1
DFL
- Matthew's change adds new device IDs supported by DFL.
- Dan's change uses array_size() for memory allocation to prevent
potential overflow
Microchip
- Conor's change adds MODULE_AUTHOR entry for microchip-spi driver
- Krzysztof's change refines dt-bindings
Intel m10 bmc secure update
- Russ's change adds new device ID supported by the driver
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
* tag 'fpga-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
fpga: m10bmc-sec: d5005 bmc secure update driver
fpga: prevent integer overflow in dfl_feature_ioctl_set_irq()
dt-bindings: fpga: microchip,mpf-spi-fpga-mgr: use spi-peripheral-props.yaml
fpga: microchip-spi: add missing module author entry
fpga: dfl-pci: Add IDs for Intel N6000, N6001 and C6100 cards
The mmc subsystem supports triggering leds on card activity, document
the trigger value here. The value is a pattern in this case.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
To: linux-leds@vger.kernel.org
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Rob Herring <robh@kernel.org>
Add devicetree parameters to control the insertion, release and press
debounce times.
Signed-off-by: Astrid Rost <astrid.rost@axis.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220921081834.22009-3-astrid.rost@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
EMMC and NAND have the same clock control register named 'SD_EMMC_CLOCK'
which is defined in EMMC port internally. bit0~5 of 'SD_EMMC_CLOCK' is
the divider and bit6~7 is the mux for fix pll and xtal. At the beginning,
a common MMC and NAND sub-clock was discussed and planed to be implemented
as NFC clock provider, but now this series of patches of a common MMC and
NAND sub-clock are never being accepted and the current binding was never
valid. the reasons for giving up are:
1. EMMC and NAND, which are mutually exclusive anyway
2. coupling the EMMC and NAND.
3. it seems that a common MMC and NAND sub-clock is over engineered.
and let us see the link fot more information:
https://lore.kernel.org/all/20220121074508.42168-5-liang.yang@amlogic.com
so The meson nfc can't work now, let us rework the clock.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Liang Yang <liang.yang@amlogic.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220907080405.28240-2-liang.yang@amlogic.com
Replace the free-form description of device tree bindings for VSC9959
and VSC9953 with a YAML formatted dt-schema description. This contains
more or less the same information, but reworded to be a bit more
succint.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220913125806.524314-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add bindings for the ADIN1110/2111 MAC-PHY/SWITCH.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Merge series from Martin Povišer <povik+lin@cutebit.org>:
there's a CS42L83 headphone jack codec found in Apple computers (in the
recent 'Apple Silicon' ones as well as in earlier models, one example
[1]). The part isn't publicly documented, but it appears almost
identical to CS42L42, for which we have a driver in kernel. This series
adapts the CS42L42 driver to the new part, and makes one change in
anticipation of a machine driver for the Apple computers.
Patch 1 adds new compatible to the cs42l42 schema.
Patches 2 to 7 are taken from Richard's recent series [2] adding
soundwire support to cs42l42. They are useful refactorings to build on
in the later patches, and also this way our work doesn't diverge.
(I fixed missing free_irq path in cs42l42_init, did
s/Soundwire/SoundWire/ in changelogs, rebased.)
Patch 8 exports some regmap-related symbols from cs42l42.c so they can
be used to create cs42l83 regmap in cs42l83-i2c.c later.
Patch 9 is the cs42l83 support proper.
Patch 10 implements 'set_bclk_ratio' on the cs42l42 core. This will be
called by the upcoming ASoC machine driver for 'Apple Silicon' Macs.
(We have touched on this change to be made in earlier discussion, see
[3] and replies.)
Patch 11 brings cs42l42-i2c.c in sync with cs42l83-i2c.c on
dev_err_probe() usage.
The base clock input to system counter is internally divided by 3 in
previous design, but there is change that no divider now. So add
a property to indicate that.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220902111207.2902493-2-peng.fan@oss.nxp.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The ARTPEC-8 has an MCT with 4 global and 8 local timer interrupts.
The SoC has a quad-core Cortex-A53 and a single-core Cortex-A5 which
share one MCT with one global and eight local timers. The Cortex-A53
and Cortex-A5 do not have cache-coherency between them, and therefore
run two separate kernels.
The Cortex-A53 boots first and starts the global free-running counter
and also registers a clock events device using the global timer. (This
global timer clock events is usually replaced by arch timer clock events
for each of the cores.)
When the A5 boots (via the A53), it should not use the global timer
interrupts or write to the global timer registers. This is because even
if there are four global comparators, the control bits for all four are
in the same registers, and we would need to synchronize between the
cpus. Instead, the global timer FRC (already started by the A53) should
be used as the clock source, and one of the local timers which are not
used by the A53 can be used for clock events on the A5.
To support this hardware, add a compatible for the MCT as well as two
new properties to describe the hardware-mandated sharing of the FRC and
dedicating local timers to specific processors.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20220609112738.359385-2-vincent.whitchurch@axis.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The Intel LGM NAND IP only supports two chip selects: There's only two
CS and ADDR_SEL register sets. Fix the maximum allowed chip select value
according to the dt-bindings.
Fixes: 2f9cea8eae ("dt-bindings: mtd: Add Nand Flash Controller support for Intel LGM SoC")
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220702231227.1579176-3-martin.blumenstingl@googlemail.com
The driver which was added at the same time as the dt-bindings uses the
compatible string "intel,lgm-ebunand". Use the same compatible string
also in the dt-bindings and rename the bindings file accordingly.
Fixes: 2f9cea8eae ("dt-bindings: mtd: Add Nand Flash Controller support for Intel LGM SoC")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220702231227.1579176-2-martin.blumenstingl@googlemail.com
Add a property to set usb2 phy's pre-emphasis, which used to widen eye
opening and boost eye swing.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220914060746.10004-2-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support ethernet SGMII, forgot to update type supported.
Fixes: c01608b3b4 ("dt-bindings: phy: mediatek: tphy: support type switch by pericfg")
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220914060746.10004-1-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Convert the Renesas R-Car Gen2 USB PHY Device Tree binding documentation
to json-schema.
Add missing properties.
Rename the device node from "usb-phy" to "usb-phy-controller", as it
does not represent a USB PHY itself, and thus does not have a
"#phy-cells" property.
Rename the child nodes from "usb-channel" to "usb-phy", as these do
represent USB PHYs.
Drop the second example, as it doesn't add any value.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/dbdcffd009302734fe2fb895ce04b72fa1ea4355.1663165000.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add a compatible string for the rk3568 dsi-dphy.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220919164616.12492-2-macroalpha82@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This is not used by the DSA dt-binding, so remove it from all examples.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The common dsa-port.yaml does this (and more) since commit 2ec2fb8331
("dt-bindings: net: dsa: make phylink bindings required for CPU/DSA
ports").
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The fact that some DSA device trees use 'label = "cpu"' for the CPU port
is nothing but blind cargo cult copying. The 'label' property was never
part of the DSA DT bindings for anything except the user ports, where it
provided a hint as to what name the created netdevs should use.
DSA does use the "cpu" port label to identify a CPU port in dsa_port_parse(),
but this is only for non-OF code paths (platform data).
The proper way to identify a CPU port is to look at whether the
'ethernet' phandle is present.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Document support for the Renesas Ethernet AVB (EtherAVB-IF) block in the
Renesas R-Car V4H (R8A779G0) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Despite the name, R-Car V3U is the first member of the R-Car Gen4
family. Hence move its compatible value to the R-Car Gen4 section.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add fsl,s32v234-fec to compatible property to support s32v234 platform.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=HdIo
-----END PGP SIGNATURE-----
Merge tag 'ib-mfd-net-pinctrl-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Lee Jones says:
====================
Immutable branch between MFD, Net and Pinctrl due for the v6.0 merge window
* tag 'ib-mfd-net-pinctrl-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: ocelot: Add support for the vsc7512 chip via spi
dt-bindings: mfd: ocelot: Add bindings for VSC7512
resource: add define macro for register address resources
pinctrl: microchip-sgpio: add ability to be used in a non-mmio configuration
pinctrl: microchip-sgpio: allow sgpio driver to be used as a module
pinctrl: ocelot: add ability to be used in a non-mmio configuration
net: mdio: mscc-miim: add ability to be used in a non-mmio configuration
mfd: ocelot: Add helper to get regmap from a resource
====================
Link: https://lore.kernel.org/r/YxrjyHcceLOFlT/c@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
CS42L83 is a publicly undocumented part found in Apple machines, similar
(almost identical) to CS42L42. Share the binding schema of CS42L42 for it.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220915094444.11434-2-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Right now there is no (known) real reason for a custom binding for
standard U-Boot partitions. Broadcom's U-Boot however requires extra
handling - looking for environment variables subblocks. This commit adds
Broadcom specific binding.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220711153041.6036-1-zajec5@gmail.com
Add compatibles for sm8450 and sm8250xp based soundcards.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220916132427.1845-4-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add optional temperature coefficient properties:
*) moortec,ts-coeff-g
*) moortec,ts-coeff-h
*) moortec,ts-coeff-cal5
*) moortec,ts-coeff-j
If defined they shall be used instead of defaults.
The coefficients were added to device tree on top of the series property
(which can be used to select between series 5 and series 6), because
coefficients can vary between product and product, and code defaults might
not be accurate enough.
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220908152449.35457-19-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add optional "moortec,ts-series" property to define the temperature
equation and coefficients that shall be used to convert the digital
output to value in milli-Celsius.
Supported series: 5 (default) and 6.
Series 5:
T = G + H * (n / cal5 - 0.5) + J * F
Where: G = 60, H = 200, cal5 = 4094, J = -0.1, F = frequency clock in MHz
Series 6:
T = G + H * (n / cal5 - 0.5)
Where: G = 57.4, H = 249.4, cal5 = 4096
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220908152449.35457-17-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for mr76006 pre-scaler which provides divide-by-2 scaling of
the input voltage, so that it can be presented to the VM for measurement
within its range (the VM input range is limited to -0.1V to 1V).
The new "moortec,vm-pre-scaler-x2" property lists the channels that use
the mr76006 pre-scaler.
The driver will use this list to multiply the voltage result by 2, to
present to the user with the actual voltage input source.
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220908152449.35457-14-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add optional "moortec,vm-active-channels" property to define the number
of active channels per VM.
This shall be useful to avoid exposing sysfs for reading inputs that are
not connected to any voltage source.
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220908152449.35457-12-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Change "resets" property to be optional instead of required, for SOCs
that don't support a reset controller.
Signed-off-by: Eliav Farber <farbere@amazon.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220908152449.35457-9-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This changes adds a detailed description for the mr75203 controller and
for some of the analog IPs controlled by it.
Signed-off-by: Eliav Farber <farbere@amazon.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220908152449.35457-8-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add required bindings to support WoW (Wake on Wireless) on
WCN6750 which is based on ath11k driver.
Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220902112520.24804-2-quic_mpubbise@quicinc.com
Update the Qualcomm Technologies, Inc. PMIC GPIO binding documentation
to include compatible strings for PM7250B and PM8450 PMICs.
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220912210624.4527-5-quic_amelende@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This binding is currently used for SDIO devices, but these chips are
also used as PCIe devices on DT platforms and may be represented in the
DT. Re-use the existing binding and add chip compatibles used by Apple
T2 and M1 platforms (the T2 ones are not known to be used in DT
platforms, but we might as well document them).
Then, add properties required for firmware selection and calibration on
M1 machines.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/E1oZDnO-0077Zy-18@rmk-PC.armlinux.org.uk
D1 needs to export a register for managing some LDO regulators, so it
needs a unique compatible.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220815041248.53268-3-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Use enumerations where appropriate to combine "const" choices and
deduplicate fallback compatible strings.
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20220815041248.53268-2-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
As the QMP HDMI PHY is a clock provider, add constant #clock-cells
property. For the compatibility with older DTs the property is not
marked as required. Also add the XO clock to the list of the clocks used
by the driver.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/492316/
Link: https://lore.kernel.org/r/20220704161148.814510-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The #sound-dai-cells property should be used only for DP controllers. It
doesn't make sense for eDP, there is no support for audio output. The
aux-bus should not be used for DP controllers. Also p1 MMIO region
should be used only for DP controllers.
Take care of these differences.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/498751/
Link: https://lore.kernel.org/r/20220822184900.307160-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The commit 85936d4f38 ("phy: qcom-qmp: add regulator_set_load to dp
phy") moved setting regulator load to the DP PHY driver (QMP). Then, the
commit 7516351beb ("drm/msm/dp: delete vdda regulator related
functions from eDP/DP controller") removed support for VDDA supplies
from the DP controller driver.
Mark these properties as deprecated and drop them from the example.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/498748/
Link: https://lore.kernel.org/r/20220822184900.307160-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The 'display-controller' child (DPU) of Display SubSystem (MDSS) uses
opp-table, so reference it which allows restricting DPU schema to fixed
list of properties.
Fixes: 3d7a0dd8f3 ("dt-bindings: msm: disp: add yaml schemas for DPU bindings")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/499212/
Link: https://lore.kernel.org/r/20220817062059.18640-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The 'display-controller' child (DPU) of Display SubSystem (MDSS) uses
opp-table, so reference it which allows restricting DPU schema to fixed
list of properties.
Fixes: 57fd4f34dd ("dt-bindings: msm: add DT bindings for sc7280")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/497898/
Link: https://lore.kernel.org/r/20220817062059.18640-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The 'display-controller' child (DPU) of Display SubSystem (MDSS) uses
opp-table, so reference it which allows restricting DPU schema to fixed
list of properties.
Fixes: 3d7a0dd8f3 ("dt-bindings: msm: disp: add yaml schemas for DPU bindings")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/497894/
Link: https://lore.kernel.org/r/20220817062059.18640-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The 'display-controller' child (DPU) of Display SubSystem (MDSS) uses
opp-table, so reference it which allows restricting DPU schema to fixed
list of properties.
Fixes: 164f69d9d4 ("dt-bindings: msm: disp: add yaml schemas for QCM2290 DPU bindings")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/497893/
Link: https://lore.kernel.org/r/20220817062059.18640-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The 'display-controller' child (DPU) of Display SubSystem (MDSS) uses
opp-table, so reference it which allows restricting DPU schema to fixed
list of properties.
Fixes: 6e986a8f1c ("dt-bindings: display: msm: Add binding for msm8998 dpu")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/497896/
Link: https://lore.kernel.org/r/20220817062059.18640-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
APQ8064, the only supported mdp4 platform, uses 4 IOMMUs for the MDP4
device. Update schema accordingly. When we have other MDP4 platforms,
this spec can be updated accordingly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/492541/
Link: https://lore.kernel.org/r/20220706145222.1565238-5-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Different platforms require different amounts of IOMMUs. The APQ8064
uses 64 IOMMU instances for GPU, adjust the schema accordingly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/492536/
Link: https://lore.kernel.org/r/20220706145222.1565238-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
It contains:
- new SAMA5D3 based board, namely SAMA5D3-EDS
- adjustments to pass the DT binding validations
- disable AES on some LAN966 based boards as they are reserverd by
secure OS
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCYyQybAAKCRCejrg/N2X7
/R+wAQCDcL8RVW4opVAOjDkMOCnVxq8M+pjx+jVOnIPIRsGnNwEAxZ9sX5gP8HM3
ygUF/qoc3bUxXAN/YH6HfWIpYszV8wY=
=9Ge/
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=49Pi
-----END PGP SIGNATURE-----
Merge tag 'at91-dt-6.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 DT for v6.1 #2
It contains:
- new SAMA5D3 based board, namely SAMA5D3-EDS
- adjustments to pass the DT binding validations
- disable AES on some LAN966 based boards as they are reserverd by
secure OS
* tag 'at91-dt-6.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
spi: dt-bindings: atmel,at91rm9200-spi: Add DMA related properties
ARM: dts: at91: Add `atmel,usart-mode` required property to serial nodes
ARM: dts: at91: sam9x60ek: Add DBGU compatibles to uart1
ARM: dts: at91: sama7g5: Swap rx and tx for spi11
dts: arm: at91: Add SAMA5D3-EDS Board
dt-bindings: arm: at91: Add info on SAMA5D3-EDS
ARM: dts: lan966x: disable aes
Link: https://lore.kernel.org/r/20220916105407.1287452-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX8DXL is a device targeting the automotive and industrial market
segments. The chip is designed to achieve both high performance and
low power consumption. It has a dual (2x) Cortex-A35 processor.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add DT compatible string for i.MX8M Mini based Gateworks GW7904 board.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
