Commit Graph

6 Commits

Author SHA1 Message Date
Linus Torvalds
6ad63dec9c ARM: SoC device tree updates for 5.1
This is a smaller update than the past few times, but with just over
 500 non-merge changesets still dwarfes the rest of the SoC tree.
 
 Three new SoC platforms get added, each one a follow-up to an existing
 product, and added here in combination with a reference platform:
 
  - Renesas RZ/A2M (R7S9210) 32-bit Cortex-A9 Real-time imaging processor
    https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rza/rza2m.html
 
  - Renesas RZ/G2E (r8a774c0) 64-bit Cortex-A53 SoC "for
    Rich Graphics Applications".
    https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rzg/rzg2e.html
 
  - NXP i.MX8QuadXPlus 64-bit Cortex-A35 SoC
    https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/i.mx-applications-processors/i.mx-8-processors/i.mx-8x-family-arm-cortex-a35-3d-graphics-4k-video-dsp-error-correcting-code-on-ddr:i.MX8X
 
 These are actual commercial products we now support with an in-kernel
 device tree source file:
 
  - Bosch Guardian is a product made by Bosch Power
    Tools GmbH, based on the Texas Instruments AM335x chip
 
  - Winterland IceBoard is a Texas Instruments AM3874 based
    machine used in telescopes at the south pole and elsewhere, see commit
    d031773169 for some pointers:
 
  - Inspur on5263m5 is an x86 server platform with an Aspeed
    ast2500 baseboard management controller. This is for running on
    the BMC.
 
  - Zodiac Digital Tapping Unit, apparently a kind of ethernet
    switch used in airplanes.
 
  - Phicomm K3 is a WiFi router based on Broadcom bcm47094
 
  - Methode Electronics uDPU FTTdp distribution point unit
 
  - X96 Max, a generic TV box based on Amlogic G12a (S905X2)
 
  - NVIDIA Shield TV (Darcy) based on Tegra210
 
 And then there are several new SBC, evaluation, development or modular
 systems that we add:
 
  - Three new Rockchips rk3399 based boards:
     - FriendlyElec NanoPC-T4 and NanoPi M4
     - Radxa ROCK Pi 4
 
  - Five new i.MX6 family SoM modules and boards for industrial
    products:
     - Logic PD i.MX6QD SoM and evaluation baseboad
     - Y Soft IOTA Draco/Hydra/Ursa family boards based on i.MX6DL
     - Phytec phyCORE i.MX6 UltraLite SoM and evaluation module
 
  - MYIR Tech MYD-LPC4357 development based on the NXP lpc4357
    microcontroller
 
  - Chameleon96, an Intel/Altera Cyclone5 based FPGA development
    system in 96boards form factor
 
  - Arm Fixed Virtual Platforms(FVP) Base RevC, a purely
    virtual platform for corresponding to the latest "fast model"
 
  - Another Raspberry Pi variant: Model 3 A+, supported both
    in 32-bit and 64-bit mode.
 
  - Oxalis Evalkit V100 based on NXP Layerscape LS1012a,
    in 96Boards enterprise form factor
 
  - Elgin RV1108 R1 development board based on 32-bit Rockchips RV1108
 
 For already supported boards and SoCs, we often add support for new
 devices after merging the drivers. This time, the largest changes include
 updates for
 
  - STMicroelectronics stm32mp1, which was now formally
    launched last week
 
  - Qualcomm Snapdragon 845, a high-end phone and low-end laptop chip
 
  - Action Semi S700
 
  - TI AM654x, their recently merged 64-bit SoC from the OMAP family
 
  - Various Amlogic Meson SoCs
 
  - Mediatek MT2712
 
  - NVIDIA Tegra186 and Tegra210
 
  - The ancient NXP lpc32xx family
 
  - Samsung s5pv210, used in some older mobile phones
 
 Many other chips see smaller updates and bugfixes beyond that.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJcf9c1AAoJEGCrR//JCVInvl8QAIgmK09QZr3VAD5WnKSoWwiX
 GP1+qgmr/cbIF9X+Kt/0Y2E+oIi9uxu7v5iwpYf0inzV4QOKwy9LvpeInd7s07bf
 hSPMN0wZ9bV5Ylk0YtlvGvOQTqys9oweeSEkHfjQ8Jm7aFkaRXQ1dt23d8KLILoB
 8GKk9A4ncn1AB1vu6xBqeqBiaQiqhMjb9paWkmjYrjhP22hHlVyGlMd8cwfG+A5a
 5Ft4lWkzvgrXPMwZgrCGU233OV5UHrn2A8ohiIUN5J6aSWxu8eMEryU+MF0poidl
 malJ+AHl2mK83YN3wYemxy/lEJzAW4PrjCVgY2bRDqwlOnI3+d+z7rVSfuMCzSKs
 TDTbv9VqPJhsZFr/GIkvB3iwnYfvP/mXrzM7gbw7rQqthEKOy+3HtZwmHAKF4QNK
 TT4wyngC/CwiyULEwtPCjbxZ/7yal6sygllioCo+M2OHeattIQEnqi/Yvc0vx/th
 th9Pepf26jUp/ZJNlxk0XDyBMPhUf6sHUvh7a+y6l6ZxZ6avbFdGPeJrQe5HF2Sp
 KM7BH3w/CpoNRSKs37mR7JpNdYNDSonItgaIm5xVJZk+Wr/BWgtcr6BbGD/vlT7N
 kIDDinyhczhvhpTmWs6QZdZNQmf6bASzTVeFv2+ES+kXt/AKhv0O5N4Pw/oU+VBv
 pD5+7YjjA0fMKcYae3gs
 =1goV
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC device tree updates from Arnd Bergmann:
 "This is a smaller update than the past few times, but with just over
  500 non-merge changesets still dwarfes the rest of the SoC tree.

  Three new SoC platforms get added, each one a follow-up to an existing
  product, and added here in combination with a reference platform:

   - Renesas RZ/A2M (R7S9210) 32-bit Cortex-A9 Real-time imaging
     processor:

       https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rza/rza2m.html

   - Renesas RZ/G2E (r8a774c0) 64-bit Cortex-A53 SoC "for Rich Graphics
     Applications":

       https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rzg/rzg2e.html

   - NXP i.MX8QuadXPlus 64-bit Cortex-A35 SoC:

       https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/i.mx-applications-processors/i.mx-8-processors/i.mx-8x-family-arm-cortex-a35-3d-graphics-4k-video-dsp-error-correcting-code-on-ddr:i.MX8X

  These are actual commercial products we now support with an in-kernel
  device tree source file:

   - Bosch Guardian is a product made by Bosch Power Tools GmbH, based
     on the Texas Instruments AM335x chip

   - Winterland IceBoard is a Texas Instruments AM3874 based machine
     used in telescopes at the south pole and elsewhere, see commit
     d031773169 for some pointers:

   - Inspur on5263m5 is an x86 server platform with an Aspeed ast2500
     baseboard management controller. This is for running on the BMC.

   - Zodiac Digital Tapping Unit, apparently a kind of ethernet switch
     used in airplanes.

   - Phicomm K3 is a WiFi router based on Broadcom bcm47094

   - Methode Electronics uDPU FTTdp distribution point unit

   - X96 Max, a generic TV box based on Amlogic G12a (S905X2)

   - NVIDIA Shield TV (Darcy) based on Tegra210

  And then there are several new SBC, evaluation, development or modular
  systems that we add:

   - Three new Rockchips rk3399 based boards:
       - FriendlyElec NanoPC-T4 and NanoPi M4
       - Radxa ROCK Pi 4

   - Five new i.MX6 family SoM modules and boards for industrial
     products:
       - Logic PD i.MX6QD SoM and evaluation baseboad
       - Y Soft IOTA Draco/Hydra/Ursa family boards based on i.MX6DL
       - Phytec phyCORE i.MX6 UltraLite SoM and evaluation module

   - MYIR Tech MYD-LPC4357 development based on the NXP lpc4357
     microcontroller

   - Chameleon96, an Intel/Altera Cyclone5 based FPGA development system
     in 96boards form factor

   - Arm Fixed Virtual Platforms(FVP) Base RevC, a purely virtual
     platform for corresponding to the latest "fast model"

   - Another Raspberry Pi variant: Model 3 A+, supported both in 32-bit
     and 64-bit mode.

   - Oxalis Evalkit V100 based on NXP Layerscape LS1012a, in 96Boards
     enterprise form factor

   - Elgin RV1108 R1 development board based on 32-bit Rockchips RV1108

  For already supported boards and SoCs, we often add support for new
  devices after merging the drivers. This time, the largest changes
  include updates for

   - STMicroelectronics stm32mp1, which was now formally launched last
     week

   - Qualcomm Snapdragon 845, a high-end phone and low-end laptop chip

   - Action Semi S700

   - TI AM654x, their recently merged 64-bit SoC from the OMAP family

   - Various Amlogic Meson SoCs

   - Mediatek MT2712

   - NVIDIA Tegra186 and Tegra210

   - The ancient NXP lpc32xx family

   - Samsung s5pv210, used in some older mobile phones

  Many other chips see smaller updates and bugfixes beyond that"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (506 commits)
  ARM: dts: exynos: Fix max voltage for buck8 regulator on Odroid XU3/XU4
  dt-bindings: net: ti: deprecate cpsw-phy-sel bindings
  ARM: dts: am335x: switch to use phy-gmii-sel
  ARM: dts: am4372: switch to use phy-gmii-sel
  ARM: dts: dm814x: switch to use phy-gmii-sel
  ARM: dts: dra7: switch to use phy-gmii-sel
  arch: arm: dts: kirkwood-rd88f6281: Remove disabled marvell,dsa reference
  ARM: dts: exynos: Add support for secondary DAI to Odroid XU4
  ARM: dts: exynos: Add support for secondary DAI to Odroid XU3
  ARM: dts: exynos: Disable ARM PMU on Odroid XU3-lite
  ARM: dts: exynos: Add stdout path property to Arndale board
  ARM: dts: exynos: Add minimal clkout parameters to Exynos3250 PMU
  ARM: dts: exynos: Enable ADC on Odroid HC1
  arm64: dts: sprd: Remove wildcard compatible string
  arm64: dts: sprd: Add SC27XX fuel gauge device
  arm64: dts: sprd: Add SC2731 charger device
  arm64: dts: sprd: Add ADC calibration support
  arm64: dts: sprd: Remove PMIC INTC irq trigger type
  arm64: dts: rockchip: Enable tsadc device on rock960
  ARM: dts: rockchip: add chosen node on veyron devices
  ...
2019-03-06 09:36:37 -08:00
Arnd Bergmann
f815bb4e97 ARM: dts: Amlogic updates for v5.1
- more features for Endless EC100 board
 - chip temperature sensor support
 - fix ethernet pins
 - add Mali-450 GPU
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAlxh4LQACgkQWTcYmtP7
 xmWu3w//bOc1aqMh325KmhP+WXUJEp0Z+7/r8TcqYYW2UMdjqGKvYNREaL+cDKu3
 6DOaWvTKrRHOJr1L4uSdg1NBEhH6Nzmb7r9bRLkj2xT5vT66pZIiMa4OETfvdvP2
 TQ86MPUY69M6IJ2JzeYA34stItYanExDhosbaHmPSJqwvDdh0V932eBg4OY/IpEn
 j4Hygf9HYSA5cSx7J2Ah1gUXzI66FcPlRBWrl+jeTS7qqU9GxYo8/8Hrgn6hyCTQ
 dpQHvgsCdeHvsf8fRpulxH/aUo5u2nuX1/R8UrOWUmCPd2r3RBu0U27Ja7FJiAeb
 s6OwLveAVeMS7Urrh3ylaFstbjg3CMtGvh1hnbWozF08yNzd6ihD5vsUED7vpxNr
 hT8m8oC8hujP1CiIxFqbkPZsz/hWoagPOG2AtRNMehs+gVxOfD+CTkw3Y+x3+NrA
 DwU9YzrKqFn4StSHJ6ccBE857gSH5QgOq0rLYiH1AlktHvXKh/hL/H82pFDJHZcW
 OFZ2nAI9VCPDlx8tCbuH16BIqD03piT5ew0wWozG5uc/JP26stmMXHQlQVDxRju4
 NsJiqGzAtgIK+jf2COVZJeYtOO9IYjPwrC0wJe2vWW7MTUBv0LSQDuBV2pTT/N87
 pSqeusg80DuPC3WZLGU3whitwO6yg3NiWeGB6cweu3gWeQsMSig=
 =PNC5
 -----END PGP SIGNATURE-----

Merge tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

ARM: dts: Amlogic updates for v5.1
- more features for Endless EC100 board
- chip temperature sensor support
- fix ethernet pins
- add Mali-450 GPU

* tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: dts: meson8b: ec100: add the GPIO line names
  ARM: dts: meson8b: ec100: improve the description of the regulators
  ARM: dts: meson8b: ec100: enable the Ethernet PHY interrupt
  ARM: dts: meson8m2: mxiii-plus: add iio-hwmon for the chip temperature
  ARM: dts: meson8b: odroidc1: add iio-hwmon for the chip temperature
  ARM: dts: meson8b: ec100: add iio-hwmon for the chip temperature
  ARM: dts: meson8b: add the temperature calibration data for the SAR ADC
  ARM: dts: meson8: add the temperature calibration data for the SAR ADC
  ARM: dts: meson8m2: use the Meson8m2 specific SAR ADC compatible
  ARM: dts: meson: switch the clock controller to the HHI register area
  ARM: dts: meson8b: fix the Ethernet data line signals in eth_rgmii_pins
  ARM: dts: meson8b: add the Mali-450 MP2 GPU
  ARM: dts: meson8: add the Mali-450 MP6 GPU
  dt-bindings: gpu: mali-utgard: add Amlogic Meson8 and Meson8b compatible
  ARM: dts: meson8b: add the APB bus
  ARM: dts: meson8: add the APB bus
  ARM: dts: meson6: add the APB2 bus

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-15 16:05:07 +01:00
Martin Blumenstingl
e7e871b50f ARM: dts: meson8m2: mxiii-plus: add iio-hwmon for the chip temperature
SAR ADC enabled channel 8 can be used to measure the chip temperature.
This can be made available to the hwmon subsystem by using iio-hwmon.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-02-11 12:52:26 -08:00
Rob Herring
abe60a3a7a ARM: dts: Kill off skeleton{64}.dtsi
Remove the usage of skeleton.dtsi in the remaining dts files. It was
deprecated since commit 9c0da3cc61 ("ARM: dts: explicitly mark
skeleton.dtsi as deprecated"). This will make adding a unit-address to
memory nodes easier.

The main tricky part to removing skeleton.dtsi is we could end up with
no /memory node at all when a bootloader depends on one being present. I
hacked up dtc to check for this condition.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-30 17:30:31 +01:00
Martin Blumenstingl
8615f55963 ARM: dts: meson8m2: mxiii-plus: mark the SD card detection GPIO active-low
After commit 89a5e15bcb ("gpio/mmc/of: Respect polarity in the device
tree") SD cards are not detected anymore.

The CD GPIO is "active low" on the MXIII-Plus. The MMC dt-bindings
specify: "[...] using the "cd-inverted" property means, that the CD line
is active high, i.e. it is high, when a card is inserted".

Fix the description of the SD card by marking it as GPIO_ACTIVE_LOW and
drop the "cd-inverted" property. This makes the definition consistent
with the existing dt-bindings and fixes the check whether an SD card is
inserted.

Fixes: 35ee52bea6 ("ARM: dts: meson8m2: add support for the Tronsmart MXIII Plus")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-01-10 17:17:14 -08:00
Oleg Ivanov
35ee52bea6 ARM: dts: meson8m2: add support for the Tronsmart MXIII Plus
The Tronsmart MXIII Plus is an Android TV box which uses the Amlogic
S812 (Meson8m2) SoC. It uses a Realtek RTL8211F RGMII Ethernet PHY as
well as a Ricoh RN5T618 system power controller. It also comes with an
Ampak AP6330 SDIO wifi/Bluetooth combo chip (support for wifi and
Bluetooth is currently not added because the Linux drivers currently
only support one MMC controller and that is used for the SD card).

Signed-off-by: Oleg Ivanov <balbes-150@yandex.ru>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-05-10 17:03:28 -07:00