mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-19 17:14:40 +08:00
a804a47658
29240 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Krzysztof Kozlowski
|
a804a47658 |
dt-bindings: usb: ci-hdrc-usb2: allow multiple PHYs
Qualcomm MSM8974 comes with USB HS phy in two variants, although final DTS chooses only one. Allow such combination in the ChipIdea USB2 bindings and also disallow any other properties in the ulpi node. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230420065051.22994-1-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Chunfeng Yun
|
d10cb206ac |
dt-bindings: usb: mtu3: add two optional clocks
Add optional clock 'xhci_ck' and 'frmcnt_ck'; Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20230417025203.18097-6-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Fabrice Gasnier
|
28f75a39d8 |
dt-bindings: usb: dwc2: add utmi optional clock
utmi clock is typically provided by PHY output. Add this optional clock, as the core could use other clocks depending on the SoC where it's used. This is needed on stm32mp15, when using the integrated full-speed PHY. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20230414084137.1050487-3-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Chunfeng Yun
|
4076c4f37b |
dt-bindings: usb: mtk-xhci: add an optional frame count clock
Add optional clock 'frmcnt_ck' used on 4nm or advanced process SoC Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20230407062406.12575-1-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Greg Kroah-Hartman
|
8e86652e3e |
Merge 6.3-rc6 into usb-next
We need the USB fixes in here for testing, and this resolves two merge conflicts, one pointed out by linux-next: drivers/usb/dwc3/dwc3-pci.c drivers/usb/host/xhci-pci.c Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Linus Torvalds
|
aa46fe36bb |
TTY/Serial driver fixes for 6.3-rc6
Here are some small tty and serial driver fixes for some reported problems: - fsl_uart driver bugfixes - sh-sci serial driver bugfixes - renesas serial driver DT binding bugfixes - 8250 DMA bugfix All of these have been in linux-next for a while with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iGwEABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZDFTtg8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynImACXZSsiSzuMqAoEisjLfcb7bPovvQCfd5FntU3K h6JE0Y44gi6WS9iWYHU= =jDa+ -----END PGP SIGNATURE----- Merge tag 'tty-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are some small tty and serial driver fixes for some reported problems: - fsl_uart driver bugfixes - sh-sci serial driver bugfixes - renesas serial driver DT binding bugfixes - 8250 DMA bugfix All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: serial: sh-sci: Fix Rx on RZ/G2L SCI tty: serial: fsl_lpuart: fix crash in lpuart_uport_is_active tty: serial: fsl_lpuart: avoid checking for transfer complete when UARTCTRL_SBK is asserted in lpuart32_tx_empty serial: 8250: Prevent starting up DMA Rx on THRI interrupt dt-bindings: serial: renesas,scif: Fix 4th IRQ for 4-IRQ SCIFs tty: serial: sh-sci: Fix transmit end interrupt handler |
||
|
Krzysztof Kozlowski
|
0246b15bbb |
dt-bindings: usb: ti,keystone-dwc3: drop assigned-clocks
The meta schema from DT schema already defines assigned-clocks, so there is no need for device schema to mention it at all. There are also no benefits of having it here. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230403191850.374839-3-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Krzysztof Kozlowski
|
d024ebb274 |
dt-bindings: usb: ti,j721e-usb: drop assigned-clocks
The meta schema from DT schema already defines assigned-clocks, so there is no need for device schema to mention it at all. There are also no benefits of having it here. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230403191850.374839-2-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Krzysztof Kozlowski
|
72958d3378 |
dt-bindings: usb: mediatek,mtk-xhci: drop assigned-clocks
The meta schema from DT schema already defines assigned-clocks, so there is no need for device schema to mention it at all. There are also no benefits of having it here. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230403191850.374839-1-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Roger Quadros
|
03f009a9d4 |
dt-bindings: usb: tps6598x: make interrupts optional
The driver can poll for interrupt status so interrupts can be optional. It is still recommended to use the interrupt line. Polling should only be used for debug and prototyping. Signed-off-by: Roger Quadros <rogerq@kernel.org> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230324133741.43408-1-rogerq@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Peng Fan
|
be15c65ad0 |
dt-bindings: usb: typec-tcpci: convert to DT schema format
Convert the binding to DT schema format, and rename it to nxp,ptn5110.yaml Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230330091736.1873121-1-peng.fan@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Linus Torvalds
|
93e2b01740 |
Pin control fixes for the v6.3 kernel cycle:
- Fix up the Kconfig options for MediaTek MT7981. - Fix the irq domain name in the AT91-PIO4 driver. - Fix some alternative muxing modes in the Ocelot driver. - Allocate the GPIO numbers dynamically in the STM32 driver. - Disable and mask interrupts on resume in the AMD driver. - Fix a typo in the Qualcomm SM8550 pin control device tree bindings. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmQoWq8ACgkQQRCzN7AZ XXOwVA/+NQmVnGB7otNkfmqk+ZB/Wyksapv5z8+skEqLMatWuDZ77AaaX/f1d+Cm M3yTSk5A/qhzC0iJCtjujz+flgc6zARWFnnzyYnp+zHk/CECGQuqcw6rWw/9Ci9n UN9+8QhT8HkT+/4iRrBlSyFCkQmuKEFFSdCMrQIJoKEyCSlW0ihwoSzTeaBhNIIP JJkk1Nc/iPaqS4KmuGYbDZl8YfHgIjlh8im1WHQIAPNZG7Mw45iqkcv3W4yr5thf y6MflFdQa1EuPML2yYApmlI6DyWDgYpIGcwGo7svnRNQiKQ0+f3Weqzf/0943Jd/ sj94RKN2ejeKdl3cdZ5pmbO72rzeM1YQrpQFsSM3WJoV50Y3Xse1gR+xupOKngjU DeimMMsKFgUhoyoqVKlsdy3SiT1/ilS0zW5srcqOHkr4tseHENaJhEjl0s9LBn0m uwEwbGqjEMb9Sov0F7WpIBRnIFmuq/lndls7u+xbbJromQ2C26EEht2ABomcGP4G bmFuESoMdcDvuifMdmsiInS239Wb15tCKWz14D1l5mL0xm0VUCnGVgq0DLOHGvQO XvqjL+FwHFm3fY8ML2CtTWnAmvFIK/tUZevG8t0HrSwkVb555PKso86bV9xU73Ay kZaV9VD6fQFZWtIVsz4ejtIe82yB2egxkoJBaSNTT/SP5qrhgeg= =/F9m -----END PGP SIGNATURE----- Merge tag 'pinctrl-v6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Some pin control fixes for the v6.3 series. The most notable and urgent one is probably the AMD fix which affects AMD laptops, found by the Chromium people. Summary: - Fix up the Kconfig options for MediaTek MT7981 - Fix the irq domain name in the AT91-PIO4 driver - Fix some alternative muxing modes in the Ocelot driver - Allocate the GPIO numbers dynamically in the STM32 driver - Disable and mask interrupts on resume in the AMD driver - Fix a typo in the Qualcomm SM8550 pin control device tree bindings" * tag 'pinctrl-v6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: dt-bindings: pinctrl: qcom,sm8550-lpass-lpi: allow input-enabled and bias-bus-hold pinctrl: amd: Disable and mask interrupts on resume pinctrl: stm32: use dynamic allocation of GPIO base pinctrl: ocelot: Fix alt mode for ocelot pinctrl: at91-pio4: fix domain name assignment pinctrl: mediatek: fix naming inconsistency pinctrl: mediatek: add missing options to PINCTRL_MT7981 |
||
Geert Uytterhoeven
|
7b21f329ae |
dt-bindings: serial: renesas,scif: Fix 4th IRQ for 4-IRQ SCIFs
The fourth interrupt on SCIF variants with four interrupts (RZ/A1) is
the Break interrupt, not the Transmit End interrupt (like on SCI(g)).
Update the description and interrupt name to fix this.
Fixes:
|
||
|
Krzysztof Kozlowski
|
e4056e38ec |
dt-bindings: pinctrl: qcom,sm8550-lpass-lpi: allow input-enabled and bias-bus-hold
Add missing common pin configuration properties: input-enabled and
bias-bus-hold.
Fixes:
|
||
|
Peng Fan
|
64de129680 |
dt-bindings: usb: usb-nop-xceiv: add power-domains property
Add power-domains optional property Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20230322052504.2629429-4-peng.fan@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Peng Fan
|
4c8375d35f |
dt-bindings: usb: ci-hdrc-usb2: convert to DT schema format
Convert the binding to DT schema format. To fix the dtbs_check error, some properties were also added, such as nvidia,phy, reset-names ulpi; missing compatibles are added. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230322052504.2629429-3-peng.fan@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Peng Fan
|
580f4ea2cd |
dt-bindings: usb: usbmisc-imx: convert to DT schema
Convert usbmisc-imx to DT schema format, add missing compatibles Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20230322052504.2629429-2-peng.fan@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Neil Armstrong
|
a33113f736 |
dt-bindings: usb: snps,dwc3: document HS & SS OF graph ports
Document the optional ports subnode to describe the High-Speed and Super-Speed connections as separate OF graph links. The ports property is an alternative to the already documented single port subnode property. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230130-topic-sm8450-upstream-pmic-glink-v5-5-552f3b721f9e@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Peng Fan
|
092a2a78e6 |
dt-bindings: usb: snps,dwc3: correct i.MX8MQ support
The previous i.MX8MQ support breaks rockchip,dwc3 support,
so use select to restrict i.MX8MQ support and avoid break others.
Fixes:
|
||
|
Geert Uytterhoeven
|
a56cde4134 |
dt-bindings: mtd: jedec,spi-nor: Document CPOL/CPHA support
SPI EEPROMs typically support both SPI Mode 0 (CPOL=CPHA=0) and Mode 3
(CPOL=CPHA=1). However, using the latter is currently flagged as an
error by "make dtbs_check", e.g.:
arch/arm/boot/dts/r8a7791-koelsch.dtb: flash@0: Unevaluated properties are not allowed ('spi-cpha', 'spi-cpol' were unexpected)
From schema: Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
Fix this by documenting support for CPOL=CPHA=1.
Fixes:
|
||
Rob Herring
|
653b131a89 |
dt-bindings: usb: Drop unneeded quotes
Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230320233904.2920197-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Konrad Dybcio
|
55b7fa634d |
dt-bindings: usb: dwc3: Add QCM2290 compatible
Document the QCM2290 DWC3 controller. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230314-topic-2290_compats-v1-5-47e26c3c0365@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Emanuele Ghidoli
|
1239e81247 |
dt-bindings: usb: smsc,usb3503: Add usb3803
Add support for usb3803, compared to usb3503 it uses a regular USB connection to upstream instead of HSIC, it has an additional low power mode (bypass) and an additional control signal (BYPASS_N). In bypass mode the downstream port 3 is connected to the upstream port with low switch resistance R_on. Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230313165039.255579-2-francesco@dolcini.it Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Peng Fan
|
3754c41c76 |
dt-bindings: usb: snps,dwc3: support i.MX8MQ
i.MX8MQ use Synopsys DesignWare USB3 Controller IP, so add the compatible. Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230203014526.1461386-1-peng.fan@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Piyush Mehta
|
487e6f420b |
dt-bindings: usb: dwc3: Add snps,ulpi-ext-vbus-drv quirk
Some ULPI USB PHYs do not support an internal vBus supply, to drive the CPEN pin properly, it requires configuration of the ULPI DRVVBUSEXTERNAL bit of the USB ULPI PHY OTG_CTRL register. Added 'snps,ulpi-ext-vbus-drv' DT property to configure the USB2 PHY to drives VBUS with an external supply. When the ULPIEXTVBUSDRV bit is set to '1' in the Global USB2 PHY Configuration registers, PHY drive vBus with an external 5V supply source. Signed-off-by: Piyush Mehta <piyush.mehta@amd.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230215093146.5812-2-piyush.mehta@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Rafał Miłecki
|
aa78a736a9 |
dt-bindings: usb: allow evaluated properties in OHCI controllers
This binding uses usb-hcd.yaml so replace additionalProperties with unevaluatedProperties to allow generic USB HCD properties. It's how EHCI and XHCI bindings work too. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230228152105.25358-1-zajec5@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Rafał Miłecki
|
f81a8591db |
dt-bindings: usb: usb-device: make "compatible" optional
This binding was originally meant to describe hard-wired USB devices but
in some situations we need to describe USB ports. That is needed e.g. if
USB port is meant to be used as a trigger source but it can have any
device plugged. It's a common case for home routers which have USB ports
(with no hard-wired devices) and USB LEDs to indicate ports state.
There is no point (and no easy way) to add separate binding covering
just USB ports. Adjust existing devices binding to allow describing
ports.
This fixes:
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb@21000: port@1: 'compatible' is a required property
From schema: Documentation/devicetree/bindings/usb/generic-ehci.yaml
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb@21000: port@2: 'compatible' is a required property
From schema: Documentation/devicetree/bindings/usb/generic-ehci.yaml
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb@21000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'port@1', 'port@2' were unexpected)
From schema: Documentation/devicetree/bindings/usb/generic-ehci.yaml
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb@22000: port@1: 'compatible' is a required property
From schema: Documentation/devicetree/bindings/usb/generic-ohci.yaml
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb@22000: port@2: 'compatible' is a required property
From schema: Documentation/devicetree/bindings/usb/generic-ohci.yaml
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb@22000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'port@1', 'port@2' were unexpected)
From schema: Documentation/devicetree/bindings/usb/generic-ohci.yaml
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb@23000: port@1: 'compatible' is a required property
From schema: Documentation/devicetree/bindings/usb/generic-xhci.yaml
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb@23000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'phy-names', 'phys', 'port@1' were unexpected)
From schema: Documentation/devicetree/bindings/usb/generic-xhci.yaml
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230228182909.1011-1-zajec5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Krzysztof Kozlowski
|
2da1b848e3 |
dt-bindings: usb: snps,dwc3: document extcon property
The DWC3 USB Linux driver and several DTS use extcon property, so
document it, even though it is deprecated, to fix warnings like:
sm6125-sony-xperia-seine-pdx201.dtb: usb@4ef8800: usb@4e00000: Unevaluated properties are not allowed ('extcon' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230304130302.51497-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Linus Torvalds
|
d172859ebf |
sound fixes for 6.3-rc1
A collection of various small fixes that have been gathered since the last PR. The majority of changes are for ASoC, and there is a small change in ASoC PCM core, but the rest are all for driver- specific fixes / quirks / updates. -----BEGIN PGP SIGNATURE----- iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmQCxUwOHHRpd2FpQHN1 c2UuZGUACgkQLtJE4w1nLE+ILQ/+JvzrQO16D2VzGogiVH0uZAtcmjRSB732yDvY TlYoT65bQAWKn5rGltMc6hfLNGHIrqG+0S/p0Wgwk9pJBL42BLDfWlLkDIQJvnil xx1f1ktLJ+NfQ/76FoJg4EpD2x3baiTB2JwhVAsnYAkSI2EyW6iVWfkWTFl1EErU baw2JKVzae6bFKwATms4QhkWK6u3boYd1HViuB58xE0qhBDvZjjnAr8uRmsljub4 43lKSkXbP9sLpyqWi6LApo4tqTV0DqEliSqG5rygLc1sbgqKhAFKgmB5Za5OqByn U2yhOqbKZACWO8QRqx286jfw/+YxY5wW2mECSkF301vLK8VPTRRLxbv7tDjRtfFm j3sCGMt3idvJaaTIZcLkuBJJyhLV8MUqSr86JosYVK5Pem9R4991f/++xvi8qLYz ypAitcyTD2wmDtX7fFKS3MMCfQAc7L3iiLIKfO4bmQtnKQa3J2+jluC8fYLq5Jiw Jh7lxpq/sorXXGXSph9SMy41Z0iBedlBABeTY0F5XeS4vkhrqRtX1XQYHdpQaAGx /7pd8sE1fTfsWbLotFi7gpyyEJ3WM9uz7QDrwa6KrxQYlbHhQhQ/Y0bV3O0SK+FA fs4QbQOWy/q1qs0vsyNCLyA8C34lNqallvzoSYEdK/qLcS/km56P8MJE1vd9BqNB lhzZjvo= =88Cc -----END PGP SIGNATURE----- Merge tag 'sound-fix-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of various small fixes that have been gathered since the last PR. The majority of changes are for ASoC, and there is a small change in ASoC PCM core, but the rest are all for driver- specific fixes / quirks / updates" * tag 'sound-fix-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (32 commits) ALSA: ice1712: Delete unreachable code in aureon_add_controls() ALSA: ice1712: Do not left ice->gpio_mutex locked in aureon_add_controls() ALSA: hda/realtek: Add quirk for HP EliteDesk 800 G6 Tower PC ALSA: hda/realtek: Improve support for Dell Precision 3260 ASoC: mediatek: mt8195: add missing initialization ASoC: mediatek: mt8188: add missing initialization ASoC: amd: yc: Add DMI entries to support HP OMEN 16-n0xxx (8A43) ASoC: zl38060 add gpiolib dependency ASoC: sam9g20ek: Disable capture unless building with microphone input ASoC: mt8192: Fix range for sidetone positive gain ASoC: mt8192: Report an error if when an invalid sidetone gain is written ASoC: mt8192: Fix event generation for controls ASoC: mt8192: Remove spammy log messages ASoC: mchp-pdmc: fix poc noise at capture startup ASoC: dt-bindings: sama7g5-pdmc: add microchip,startup-delay-us binding ASoC: soc-pcm: add option to start DMA after DAI ASoC: mt8183: Fix event generation for I2S DAI operations ASoC: mt8183: Remove spammy logging from I2S DAI driver ASoC: mt6358: Remove undefined HPx Mux enumeration values ASoC: mt6358: Validate Wake on Voice 2 writes ... |
||
|
Linus Torvalds
|
0988a0ea79 |
power supply changes for the v6.3 series (part 2)
- Fix DT binding for Richtek RT9467 - Fix a NULL pointer check in the power-supply core - Document meaning of absent "present" property -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAmQCjCEACgkQ2O7X88g7 +pq+WA/+MQe1ft5IUsQEtgnvf3SGiNZa3NMeSiD07wLWAilVKzD4nvNJB824Q85u f/2J35ri93Sb1NxApHspCKXGHwaDJ6LMrxBuBkyHPT5PFv8wwAXZzXAJpSw5phKm zbto72CLvG4CyFMtkV1OR10p/OtldQsy6RC6HF1tuecD44VCgU9KO00wlw5ckSzH 8GRKVFr6f12ehS9CYvM5HBZJ75M32L2FfJZ+cj4RjOYe/RFI7QNz46Q9HxXm2YMW p5R4NoyO31I1d0uSII7GtzhRvrb2Ryct7YmgeCwURMEhZZLqFU/P93+E/FD1rNmd CNJjoB2iYTBTAHTeLzy1QcCHn5JNuk2YIfCrSHVvbeYbuEkRVKBwMKzl6248fkRW B393r1n52V9eDGh9ZNawcx6CRbGEQNgAg9mg7W8MAl9qtlm3cgeRZm4NL6MMMMdB /PRokeYeW1tutdN0CSv/vNS0UC0fS7QYZNP3rLsmh14VrmkJSc5RN1m3Ryq2A+Vd VU7KZEp/48R4fqpAs/MfQdn6Hr+ovZNav+Ud8mM5VcAycpVUrCkiZ3w7g/8E4kVt OoCEO0u5kpqxSCtxKlvXrvQeQgmdakJWTyvWDQP8g6ajtH4QQVZ4vGFguMW744lR 3CZO5OuNM2XPjw0tM/bs4NlfEoZHMkVlCprW+fGtU4pL9vy4EeA= =2K3C -----END PGP SIGNATURE----- Merge tag 'for-v6.3-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull more power supply updates from Sebastian Reichel: - Fix DT binding for Richtek RT9467 - Fix a NULL pointer check in the power-supply core - Document meaning of absent "present" property * tag 'for-v6.3-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: dt-bindings: power: supply: Revise Richtek RT9467 compatible name ABI: testing: sysfs-class-power: Document absence of "present" property power: supply: fix null pointer check order in __power_supply_register |
||
|
Linus Torvalds
|
271d89394e |
RTC for 6.3
Subsystem: - allow rtc_read_alarm without read_alarm callback New driver: - NXP BBNSM module RTC Drivers: - use IRQ flags from fwnode when available - abx80x: nvmem support - brcmstb-waketimer: add non-wake alarm support - ingenic: provide CLK32K clock - isl12022: cleanups - moxart: switch to using gpiod API - pcf85363: allow setting quartz load - pm8xxx: cleanups and support for setting time - rv3028, rv3032: add ACPI support -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEBqsFVZXh8s/0O5JiY6TcMGxwOjIFAmQBNu0ACgkQY6TcMGxw OjLXoA//S8YQQLqAOHPdmEmiVHEoYQv+VYwYrnK8of3QTDOJizboDRgRSSMgNNBj ViqDCLUUDnmPd/91BiTVgKdfmjY2gqR3coyu5XcEKDNRoLCeLjrKENtrmrjwOvKW gdbvs3oXsUtWC6JY0vuEABCn0DNxg7I7pvT57Ykaun2mhASo6LeTwGU5Jwo27GtY /MEY7Av+VMOvNWXsjRi9qaIms9DtX8LbXSDgkYoVy8QH97iW9iTVZu2tCgFAR9Fl HrLzVslnOg+ae8sBJ7rAY57xD+ZRT/P8ZnVlgUs/oQ9DxJ15rmjifzJA6SurcVea HmNrVzdyiNmTY4Vk9/M/pAADwwz0L5sxXMnbemLcl97MHIZulhAz/4zWMEwZixCi Of+ROqt1tahk69d3QRry4zlWp5dGfn07+DDD9aVFV2YqmAmBSlUkru65tse10gem QWVcrmURMQoBjrgXkWki3+6NjvqlBTrJa7qY8KAB3iGpDF/yAUwYm8rBVYxGAiUz NaoiFKgwbVxE67SSP6OFURTWi+lGyS+kmaTVbzfTfWDI8Tf++U4xbMkDzhyvL4A2 HZD3HbTghdnbVfysTI9Fxtk1mFbO3EDuMRK5YpLcx7gZAn+S7vUNRU0oFPxAR/aX BhZAWSQvZJWewPuTBSfoSSPFCEEiCSqOVupHmMr5J4H1lgtZAXo= =aZkd -----END PGP SIGNATURE----- Merge tag 'rtc-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "A few drivers got some nice cleanups and a new driver are making the bulk of the changes. Subsystem: - allow rtc_read_alarm without read_alarm callback New driver: - NXP BBNSM module RTC Drivers: - use IRQ flags from fwnode when available - abx80x: nvmem support - brcmstb-waketimer: add non-wake alarm support - ingenic: provide CLK32K clock - isl12022: cleanups - moxart: switch to using gpiod API - pcf85363: allow setting quartz load - pm8xxx: cleanups and support for setting time - rv3028, rv3032: add ACPI support" * tag 'rtc-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (64 commits) rtc: pm8xxx: add support for nvmem offset dt-bindings: rtc: qcom-pm8xxx: add nvmem-cell offset rtc: abx80x: Add nvmem support rtc: rx6110: Remove unused of_gpio,h rtc: efi: Avoid spamming the log on RTC read failure rtc: isl12022: sort header inclusion alphabetically rtc: isl12022: Join string literals back rtc: isl12022: Drop unneeded OF guards and of_match_ptr() rtc: isl12022: Explicitly use __le16 type for ISL12022_REG_TEMP_L rtc: isl12022: Get rid of unneeded private struct isl12022 rtc: pcf85363: add support for the quartz-load-femtofarads property dt-bindings: rtc: nxp,pcf8563: move pcf85263/pcf85363 to a dedicated binding rtc: allow rtc_read_alarm without read_alarm callback rtc: rv3032: add ACPI support rtc: rv3028: add ACPI support rtc: bbnsm: Add the bbnsm rtc support rtc: jz4740: Register clock provider for the CLK32K pin rtc: jz4740: Use dev_err_probe() rtc: jz4740: Use readl_poll_timeout dt-bindings: rtc: Add #clock-cells property ... |
||
Takashi Iwai
|
fb2e5fc8c8 |
ASoC: Fixes for v6.3
Almost all of this is driver specific fixes and new IDs that have come in during the merge window. A good chunk of them are simple ones from me which came about due to a bunch of Mediatek Chromebooks being enabled in KernelCI, there's more where that came from. We do have one small feature added to the PCM core by Claudiu Beznea in order to allow the sequencing required to resolve a noise issue with the Microchip PDMC driver. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmP/tTkACgkQJNaLcl1U h9CmiQf/cNpe4ZCxFQYXW4eucJfHT+qsT9fQongqe2Ash/IL4svBbbvPn4H1oW7i ce3r8u3RelNfa+H0g9cKD1anADlKresKr95HNl/INTG9g34IuqKA9dZVrXtBMlEz YCKQbxcR7PiyfI6bImoESGBBe/tm+WEE+mTEndxbtTsFbIsC/a2OORKulU4gzHKF ZEQBwgfbX/eH0a4xXyFMFxQHehlq/7fB2oEMo3ZCrYrus/NbQMsLFTp1RaPlXFh4 6bVR3DABG9MOzDiQoK86gb4HzADTirkw6cnsLkYRgCZSCLR5qR2xrBnd5ykqsRdg CZnV9C3sVkRcaTXoZoSbXMSzkbgB2Q== =IM/h -----END PGP SIGNATURE----- Merge tag 'asoc-fix-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.3 Almost all of this is driver specific fixes and new IDs that have come in during the merge window. A good chunk of them are simple ones from me which came about due to a bunch of Mediatek Chromebooks being enabled in KernelCI, there's more where that came from. We do have one small feature added to the PCM core by Claudiu Beznea in order to allow the sequencing required to resolve a noise issue with the Microchip PDMC driver. |
||
|
Linus Torvalds
|
a9a01e1238 |
linux-watchdog 6.3-rc1 tag
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (GNU/Linux) iEYEABECAAYFAmQAOqgACgkQ+iyteGJfRsp8pACgiXMppnKQzfIW2Shx/KqzyIcj eGsAoIB75OZuzqCvOGfjMG5+NJZHqcYl =RZVA -----END PGP SIGNATURE----- Merge tag 'linux-watchdog-6.3-rc1' of git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - qcom-wdt dt-bindings improvements and additions (like MSM8994 and MDM9615) - mtk_wdt: Add reset_by_toprgu support - devm_clk_get_enabled() helper changes - Fix kmemleak in watchdog_cdev_register - watchdog sysfs improvements - Other fixes and small improvements * tag 'linux-watchdog-6.3-rc1' of git://www.linux-watchdog.org/linux-watchdog: (52 commits) watchdog: at91rm9200: Only warn once about problems in .remove() watchdog: mt7621-wdt: avoid ralink architecture dependent code watchdog: mt7621-wdt: avoid static global declarations dt-bindings: watchdog: mt7621-wdt: add phandle to access system controller registers watchdog: sbsa_wdog: Make sure the timeout programming is within the limits dt-bindings: watchdog: qcom-wdt: add qcom,apss-wdt-sa8775p compatible watchdog: report options in sysfs watchdog: report fw_version in sysfs dt-bindings: watchdog: fsl-imx: document suspend in wait mode watchdog: imx2_wdg: suspend watchdog in WAIT mode watchdog: pcwd_usb: Fix attempting to access uninitialized memory dt-bindings: watchdog: qcom-wdt: merge MSM timer dt-bindings: watchdog: qcom-wdt: allow interrupts dt-bindings: watchdog: qcom-wdt: add qcom,kpss-wdt-mdm9615 dt-bindings: watchdog: qcom-wdt: fix list of MSM timer compatibles dt-bindings: watchdog: qcom-wdt: do not allow fallback alone dt-bindings: watchdog: qcom-wdt: require fallback for IPQ4019 watchdog: Fix kmemleak in watchdog_cdev_register watchdog: Include <linux/kstrtox.h> when appropriate watchdog: at91sam9_wdt: use devm_request_irq to avoid missing free_irq() in error path ... |
||
Sergio Paracuellos
|
ff75e4eb71 |
dt-bindings: watchdog: mt7621-wdt: add phandle to access system controller registers
MT7621 SoC provides a system controller node for accessing to some registers. Add a phandle in this node to avoid using MIPS related arch operations and includes in watchdog driver code. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230214103936.1061078-2-sergio.paracuellos@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> |
||
|
Linus Torvalds
|
e492250d52 |
pwm: Changes for v6.3-rc1
This rather small set of changes includes some minor fixes and improvements. The AB8500 driver gained support for reading the initial hardware state and the Synopsys DesignWare driver received some work to prepare for device tree and platform support. -----BEGIN PGP SIGNATURE----- iQJNBAABCAA3FiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmP+DlQZHHRoaWVycnku cmVkaW5nQGdtYWlsLmNvbQAKCRDdI6zXfz6zoaNvD/46MIgjveZf/+SltL1MF5Th RcudsTk4U5k2MHwVp7UV6UAKq45uu6b88CRWkfKCoN0V9c+JaItMurSI1VPRJf5L 9rW9axRd3EUSfPqu8WuqpcTocjhILuWIHFr2feGdlRGeEbUmBc1Jsj89MTePmp3n BNMIU9QU3or31VAE99GRb0ALrPkTW4fnHqH7dHEUxfrQ2Aaa7CAy5TuWSsS9nWDt NaP1MQHHkSr4viUjmDVzcD6trK4C3nDXhtU9GjzHRGuA8FVk0PvsE8JuSpiNmCUj 1oibqZNwBeVn+BWPabbGQmkWHmBp5GkKtXohcFiibqivIUOx469dgjzHwIA71i8w wA3AnIm9Mga9sCDON0d6XzR3yjl6/ZC4igHtUxY6PTy4Gh3sKcXxlu6GSj7SZA4N xOCykGxOaGYoiPFtVNWwTfkTApYezp+gi5xLzxk+InGCHFtJpaMwRu+PsBwL311K GTxrr4NR49W/4ogE8/epeunh8flmzBSA8cWQJiKRD0q/Xtl0AnrVPDCN1wZHTqqm LFivsq13vn0yDNnfwc12whhA1DaG08Mesec4QSemhAMlErs1Oqud77wdBIa9oK5w iPe3ienzvvow7Y8Ek4fqBFYY8ACHoyoMt5aINe8ZV7DYXE79HInY/q9RKSvYT+0x X4V5ihcowNXt6Kl67PsNBA== =PQhV -----END PGP SIGNATURE----- Merge tag 'pwm/for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This rather small set of changes includes some minor fixes and improvements. The AB8500 driver gained support for reading the initial hardware state and the Synopsys DesignWare driver received some work to prepare for device tree and platform support" * tag 'pwm/for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: dwc: Use devm_pwmchip_add() pwm: dwc: Move memory allocation to own function pwm: dwc: Change &pci->dev to dev in probe dt-bindings: pwm: Document Synopsys DesignWare snps,pwm-dw-apb-timers-pwm2 pwm: iqs620a: Replace one remaining instance of regmap_update_bits() pwm: ab8500: Implement .get_state() pwm: ab8500: Fix calculation of duty and period pwm: lp3943: Drop unused i2c include dt-bindings: pwm: mediatek: Convert pwm-mediatek to DT schema pwm: stm32-lp: fix the check on arr and cmp registers update pwm: Move pwm_capture() dummy to restore order pwm: sifive: Always let the first pwm_apply_state succeed |
||
Claudiu Beznea
|
143a2f011c
|
ASoC: dt-bindings: sama7g5-pdmc: add microchip,startup-delay-us binding
PDMC can work with different types of microphones, thus different boards could have different microphones. Depending on microphone type the PDMC would need to wait longer or shorter period (at startup) than the default chosen one to filter unwanted noise. Thus add microchip,startup-delay-us binding to let PDMC users to specify startup delay. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230228110145.3770525-3-claudiu.beznea@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Linus Torvalds
|
11c7052998 |
ARM: SoC drivers for 6.3
As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmPtSN8ACgkQmmx57+YA
GNkOSw/+JS5tElm/ZP7c3uWYp6uwvcb0jUlKW/U3aCtPiPEcYDLEqIEXwcNdaDMh
m4rW3GYlW0IRL3FsyuYkSLx+EIIUIfs40wldYXJOqRDj0XasndiloIwltOQJGfd9
C/UVM0FpJdxMJrcBMFgwLLQCIbAVnhHP34i6ppDRgxW/MfTeiCaaG6fnS70iv6mC
oh2N7FoZSKDtTrFtlR5TqFiK5v/W1CgNJVuglkFB0ceFpjyBpp/8AT0FGS887xCz
IYSTqm4Q/79vaZXI1Y2oog257cgdwsVqgPrnK5CuSFhTnAcJMCekiFelHq8Yhyuk
Rw7j/B3KO3AOaxmR75c6SZdeZ+VHgUMRC/RKe3fay0sm3Zea2kAIPXA6Zn+r/cxb
8M94V59qBz+f8XmpXRTK1UR3s3EbwFIuNyuDIkeorMtpSKtvqJXmZxGDwNIfXr2F
/voo++MKjzdtdxdW/D/5Tc9DC0Pyb4HLi0EYj2QCzA03njmfLDF1w73NfzMec+GD
R1zAd3FEbiJQx8Hin0PSPjYXpfMnkjkGAEcE9N9Ralg4ewNWAxfOFsAhHKTZNssL
pitTAvHR/+dXtvkX7FUi2l/6fqn8nJUrg/xRazPPp3scRbpuk8m6P4MNr3/lsaHk
HTQ/hYwDdecWLvKXjw5y9yIr3yhLmPPcloTVIIFFjsM0t8b+d9E=
=p6Xp
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv"
* tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
power: supply: Introduce Qualcomm PMIC GLINK power supply
soc: apple: rtkit: Do not copy the reg state structure to the stack
soc: sunxi: SUN20I_PPU should depend on PM
memory: renesas-rpc-if: Remove redundant division of dummy
soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
MAINTAINERS: Update qcom CPR maintainer entry
dt-bindings: firmware: document Qualcomm SM8550 SCM
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
soc: qcom: socinfo: Add support for new field in revision 17
soc: qcom: smd-rpm: Add IPQ9574 compatible
soc: qcom: pmic_glink: remove redundant calculation of svid
soc: qcom: stats: Populate all subsystem debugfs files
dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
soc: qcom: pmic_glink: Introduce altmode support
...
|
||
|
Linus Torvalds
|
da15efe1a8 |
MMC core:
- Extend slot-gpio to be used for host specific card detect interrupts - Align to common busy polling behaviour for mmc ioctls - Suggest the BFQ I/O scheduler to be built along with MMC/SD support - Add devm_mmc_alloc_host() to enable further cleanups in host drivers MMC host: - atmel-mci: Fix race condition when stopping/starting a command - dw_mmc-starfive: Add new driver to support the StarFive JH7110 variant - dw_mmc-rockchip: Add support for the RK3588 variant - jz4740: Add support for the vqmmc power supply - meson-gx: Convert the DT bindings to the dt-schema - meson-gx: Enable the platform interrupt to be used for card detect - moxart: Set the supported maximum request/block/segment sizes - renesas,sdhi: Add support for the RZ/V2M variants - sdhci: Rework code to drop SDHCI_QUIRK_MISSING_CAPS - sdhci-esdhc-imx: Improve tuning logic support - sdhci-msm: Add support for the IPQ5332 and the IPQ9574 variants - sdhci-of-dwcmshc: Add the missing device table IDs for acpi - sdhci-of-dwcmshc: Improve clock support for the Rockchip variant - sdhci-of-dwcmshc: Enable support of V4 host for the BlueField-3 variant - sdhci-pxav2: Add support for the PXA168 V1 variant - sdhci-pxav2: Add support for SDIO IRQs for the PXA168 V1 variant - uniphier-sd: Add support for SD UHS-I speed modes -----BEGIN PGP SIGNATURE----- iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmP8wf8XHHVsZi5oYW5z c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCmcwQ//cx6R8Faf71W2a/ta1rqkCK5y AmZT47sT3DkXI5exQLyR1k+9Fed7CjayaGp/j4Vy6ylYFBJmxwT9IwKytOr/pRD7 EmuI1uxMePg/XqcrByMYSxDKccWapLbdiRyIyZrEn/BVoL38KuJq87SVyhLHWiQ2 Hubb5lbS5pgnpUjD+10ZlFeTbYbVYkoYiRHUAiJU1mSTId6yxqdVpGpIR4zwgt8C oEhfdWvKrbemBJW2vFzvplHC4aTzipxxiwiTlkPKXPvJwIsblD4lUFn2TeO7SjkJ hnsjF6J1hLcZTgHyChQ2PY/eldmsKDe8EAUVohj/3j5eDVCj4buebxWAiuUJAO1x ulNLl5wjYRqpWXFSIJZyu32VtRH2UDUzQSDoSDxkx/9Txu7OEd7HIr0juxD9D7lw gMO8QLXALth+W++pTpb0sIVBc9FyvdN0ZDqf4wpi3KRvyJwWziyAsqWxrQFTnw3+ mISJ/AZTaLljtEhrOVdYHFvFV3lQ6jm4dXLx3ZhMf5wQpKgokDB5zIwTO5bglVq5 mBz6CIbTLzi99089i++yYB9GO6mxZPWNc4bBMvwPuFxQI86hi8gWM2PF4dU+xGQu 4LjWlqbnoY2ZnWK3D4DGaVRvr+5A3Slf1AsAJd2BR8oivdBt+Owim+CvlVvALa5d xaDqiP7WUAeAFWLFOx0= =CF/8 -----END PGP SIGNATURE----- Merge tag 'mmc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC updates from Ulf Hansson: "MMC core: - Extend slot-gpio to be used for host specific card detect interrupts - Align to common busy polling behaviour for mmc ioctls - Suggest the BFQ I/O scheduler to be built along with MMC/SD support - Add devm_mmc_alloc_host() to enable further cleanups in host drivers MMC host: - atmel-mci: Fix race condition when stopping/starting a command - dw_mmc-starfive: Add new driver to support the StarFive JH7110 variant - dw_mmc-rockchip: Add support for the RK3588 variant - jz4740: Add support for the vqmmc power supply - meson-gx: Convert the DT bindings to the dt-schema - meson-gx: Enable the platform interrupt to be used for card detect - moxart: Set the supported maximum request/block/segment sizes - renesas,sdhi: Add support for the RZ/V2M variants - sdhci: Rework code to drop SDHCI_QUIRK_MISSING_CAPS - sdhci-esdhc-imx: Improve tuning logic support - sdhci-msm: Add support for the IPQ5332 and the IPQ9574 variants - sdhci-of-dwcmshc: Add the missing device table IDs for acpi - sdhci-of-dwcmshc: Improve clock support for the Rockchip variant - sdhci-of-dwcmshc: Enable support of V4 host for the BlueField-3 variant - sdhci-pxav2: Add support for the PXA168 V1 variant - sdhci-pxav2: Add support for SDIO IRQs for the PXA168 V1 variant - uniphier-sd: Add support for SD UHS-I speed modes" * tag 'mmc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits) mmc: meson-gx: Use devm_platform_get_and_ioremap_resource() mmc: meson-gx: constify member data of struct meson_host mmc: meson-gx: use devm_clk_get_enabled() for core clock mmc: core: fix return value check in devm_mmc_alloc_host() dt-bindings: mmc: meson-gx: fix interrupt binding mmc: meson-gx: support platform interrupt as card detect interrupt dt-bindings: mmc: meson-gx: support specifying cd interrupt mmc: core: support setting card detect interrupt from drivers mmc: starfive: Add sdio/emmc driver support dt-bindings: mmc: Add StarFive MMC module dt-bindings: mmc: sdhci-msm: Allow 1 icc path dt-bindings: mmc: rockchip-dw-mshc: Add RK3588 compatible string mmc: core: Align to common busy polling behaviour for mmc ioctls dt-bindings: mmc: Add resets property to cadence SDHCI binding mmc: meson-gx: remove meson_mmc_get_cd mmc: moxart: set maximum request/block/segment sizes mmc: sdhci-brcmstb: Use devm_platform_get_and_ioremap_resource() mmc: sdhci-of-dwcmshc: add the missing device table IDs for acpi mmc: sdhci-of-dwcmshc: Update DLL and pre-change delay for rockchip platform mmc: jz4740: Add support for vqmmc power supply ... |
||
|
Linus Torvalds
|
f3a2439f20 |
remoteproc updates for v6.3
Support for PRU clients to acquire a control reference to the PRU instances is introduced, and the PRU now allows specifying firmware-name in Devicetree. sysfs is requested to be read-only when the remoteproc instance is consumed by another kernel driver. Support for the C7xv DSP on AM62A SoC is introduced. The Devicetree binding for the Qualcomm PAS devices are split up in multiple files, to better account for the differences in resources between them. A number of missing Devicetree bindings are added, and the Qualcomm WCNSS binding is converted to YAML. A few cleanups are introduced for the Mediatek SCP driver. And a sanity check of the firmware image is introduced in the Mediatek driver. For Qualcomm SC7280 ADSP support is added, MSM8953 gains ADSP and modem support, SM6115 and SM8550 gains ADSP, CDSP and modem support, and support for pronto v3 support (used on e.g. MSM8953) is added. The Qualcomm modem remoteproc driver is modified to use a no-map reserved-memory region for it's authentication metadata, in order to avoid fatal security violations caused by accesses from Linux during the authentication process. Support for separate loading of a Devicetree blob is added to the PAS driver, and support for the PAS driver to carve out DSM memory for the modem is added as well. The Qualcomm ADSP remoteproc driver gains support for mapping memory into specific range using the IOMMU. The sysmon driver is transitioned to strlcpy() -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmP7kusVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3Fe1gP/3uTJ/2f5rLgaW4qrN+b93PNONF3 TWqGcEltAOfc2bLhS9aUk57FT8gRLJ+y5im4JXxJO9Vbnj0/pBrsBKitbVvqWbTB qztROqQN7KtooD+qc9Ndf2caL9Oca2R8SH3C0bO5JbdM+7BSv3rO8xu7K0X6SLsI kpf4C3cq+IP2vk7TErmYYYnEkr46Y3xT8HdUC7eCgiZQl+UnV2Cv4QNsbANkuvDp aLnmKpeTqgBb8plJ3XSU6mOEK+Cf2nwFg3oYj4JJEMLVxXwepGpDC5mDppqUyaA8 XO8j7XP+2kstlq/8ERbZmPJjKnDBIjRXDq0I7ixg9fUee/CMGmxQQnMkaD1OBR95 jUGn7VtwEMwMzAycRWsi6SqRFyhsKI6rYHRTVSeePcbn/T6er4XHcOYhKdndKEK/ /2Uqw45gOFRZS7l0BqRTXJ1WYzl85Va07DQGQ0MaesxRHmiJcdbmhocr9vU7d5pw L1brGoQ5vPJdCZGY1jRN0UclapqE9CVVwFgR4gi/Kh+4DwmI58q2cp5PHCHs592Y MBViWL6//XHhf9GiqrfQZZEoV4PhyuqjSye6At9mwLif2n4RynLMI0iipzP0ydBf 2R+0YLrdXg757r/+IUl+T8IINCd3JgirOkzUBs8vN9zwRJYi6veHieDjYqUS9nXs 3Wjm5kbmxukSfaps =clXY -----END PGP SIGNATURE----- Merge tag 'rproc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull remoteproc updates from Bjorn Andersson: - Support for PRU clients to acquire a control reference to the PRU instances is introduced, and the PRU now allows specifying firmware-name in Devicetree. sysfs is requested to be read-only when the remoteproc instance is consumed by another kernel driver - Support for the C7xv DSP on AM62A SoC is introduced - The Devicetree binding for the Qualcomm PAS devices are split up in multiple files, to better account for the differences in resources between them. A number of missing Devicetree bindings are added, and the Qualcomm WCNSS binding is converted to YAML - A few cleanups are introduced for the Mediatek SCP driver. And a sanity check of the firmware image is introduced in the Mediatek driver - For Qualcomm SC7280 ADSP support is added, MSM8953 gains ADSP and modem support, SM6115 and SM8550 gains ADSP, CDSP and modem support, and support for pronto v3 support (used on e.g. MSM8953) is added - The Qualcomm modem remoteproc driver is modified to use a no-map reserved-memory region for it's authentication metadata, in order to avoid fatal security violations caused by accesses from Linux during the authentication process - Support for separate loading of a Devicetree blob is added to the PAS driver, and support for the PAS driver to carve out DSM memory for the modem is added as well - The Qualcomm ADSP remoteproc driver gains support for mapping memory into specific range using the IOMMU. The sysmon driver is transitioned to strlcpy() * tag 'rproc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (69 commits) dt-bindings: mailbox: qcom,apcs-kpss-global: drop mbox-names from example dt-bindings: remoteproc: qcom,glink-edge: correct label description dt-bindings: remoteproc: qcom,glink-rpm-edge: convert to DT schema dt-bindings: remoteproc: qcom,sm8550-pas: correct power domains remoteproc: qcom_q6v5_pas: enable sm8550 adsp & cdsp autoboot dt-bindings: remoteproc: qcom: Add sm6115 pas yaml file remoteproc: qcom: pas: Add sm6115 remoteprocs remoteproc: qcom: pas: Adjust the phys addr wrt the mem region remoteproc: qcom: fix sparse warnings remoteproc: qcom: replace kstrdup with kstrndup remoteproc: mediatek: Check the SCP image format remoteproc: qcom_q6v5_mss: Use a carveout to authenticate modem headers Revert "remoteproc: qcom_q6v5_mss: map/unmap metadata region before/after use" dt-bindings: remoteproc: qcom,sc7280-mss-pil: Update memory-region dt-bindings: remoteproc: qcom,sc7180-mss-pil: Update memory-region dt-bindings: remoteproc: qcom,msm8996-mss-pil: Update memory region dt-bindings: remoteproc: qcom,q6v5: Move MSM8996 to schema remoteproc: qcom_q6v5_pas: add sm8550 adsp, cdsp & mpss compatible & data remoteproc: qcom_q6v5_pas: add support for assigning memory to firmware remoteproc: qcom_q6v5_pas: add support for dtb co-firmware loading ... |
||
|
Linus Torvalds
|
cc38a46de7 |
rpmsg updates for v6.3
rpmsg ctrl and char driver locking is ensure ordering in cases where the communication link is being torn down in parallel with calls to open(2) or poll(2). The glink driver is refactored, to move rpm/smem-specifics out of the common logic and better suite further improvements, such as transports without a mailbox controller. The handling of remoteproc shutdown is improved, to fail clients immediately instead of having them to wait for timeouts. A driver_override memory leak is corrected and a few spelling improvements are introduced. glink_ssr is transitioned off strlcpy() and "gpr" is added as a valid child node of the glink-edge DT binding. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmP7jLkVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FKy4P/RBK8WFS9FJHgP3KZrN8XawruWco W/23uiW5tKmtzXO4RB6ZMnHR6iURgqzN6cQnguH9neq4ze1rBbLUkSeKtYK8FwJg XApzFMDCxtnjZwCAMdtT14C6R0mDt21DyeGCwRRaQg4eqiaPpuQBNX9ijgh3bons GKK0UJuZ1o/E+/pf18+vls1PRKXDqmFr8OUpIPEdM0EA8Mr+bFGbA9TbBkHWr7uq 5xo7GSZU8u+mA53HGNctIVWAFEM0v9xHLgbjSXcHSiuS0xAC99CHw6TlA26SY6WS gh/ovF31m7tC7lz4nFSZfeLHbKb02dRmjIDxsCMFp5pLq/jbMgbkoJ97qtQlSQhW VjQemUzGvaENgwZr5ZcHEJ75SoGNtudHnfnwZeybRGjfiMLocVDcTZ81qIvxr8y7 jZkrQw2uUpGu8qrV9URuIHb5xfo5ixdZ8llgKWq6/PT8pcYWcwBybby55jJ/vhG0 7Fbv37VeEyq9xxpNfwuMELA2RztT5zrbPZVSfN348PIgMW3nbGzryw//r6HxmUUr +FoSvuSBwrnEHlsdgg3ydzIhzgY1+k3jQcS7xW+nZ3PG7eHBhIVBPyNZ9xydtfaL TBtjsCRigoLMxp8Fpdz0xANF5PICXcGfqX4591yZ9Q7fAYYQr/WKtiWS+cNd5t6A nXDMGwVYjEA46n/1 =0w8J -----END PGP SIGNATURE----- Merge tag 'rpmsg-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull rpmsg updates from Bjorn Andersson: - rpmsg ctrl and char driver locking is ensure ordering in cases where the communication link is being torn down in parallel with calls to open(2) or poll(2) - The glink driver is refactored, to move rpm/smem-specifics out of the common logic and better suite further improvements, such as transports without a mailbox controller. The handling of remoteproc shutdown is improved, to fail clients immediately instead of having them to wait for timeouts. A driver_override memory leak is corrected and a few spelling improvements are introduced - glink_ssr is transitioned off strlcpy() and "gpr" is added as a valid child node of the glink-edge DT binding * tag 'rpmsg-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: rpmsg: glink: Release driver_override rpmsg: glink: Avoid infinite loop on intent for missing channel rpmsg: glink: Fix GLINK command prefix rpmsg: glink: Fix spelling of peek rpmsg: glink: Cancel pending intent requests at removal rpmsg: glink: Fail qcom_glink_tx() once remove has been initiated rpmsg: glink: Move irq and mbox handling to transports rpmsg: glink: rpm: Wrap driver context rpmsg: glink: smem: Wrap driver context rpmsg: glink: Extract tx kick operation rpmsg: glink: Include types in qcom_glink_native.h rpmsg: ctrl: Add lock to rpmsg_ctrldev_remove rpmsg: char: Add lock to avoid race when rpmsg device is released rpmsg: move from strlcpy with unused retval to strscpy dt-bindings: remoteproc: qcom,glink-edge: add GPR node |
||
|
Linus Torvalds
|
9b0b0dd857 |
hwspinlock changes for v6.3
This updates the sun6i DT binding, to allow (and require) #hwlock-cells, and it makes use of device_match_of_node() to slightly clean up the condition in of_hwspin_lock_get_id(). -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmP7ihsVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FoJcQAMfD/H7wvS5eKnDVnsmNE9czbJxm mMuU3P5YRApS39i3ysYUrwRb/BOYVPIMDCz7delVzZJbCGjM8oJwWnY9nFp4+dyb T1GUorEGbrz8dmOzO8Rf41JT5TByuOceJq2RsWMefwXuzM/WV4jyfkz9ZoVYaIAR YCzwGbBM0n6MVnJDNeympUfzPueONPChQGasw0LwXsdVBjNPUelE1BgEU69QM/iw a/Qq914KzMwwIGzShmaRjG2NVrKW9VnKQeCLoPglKVPJKqsYGjA3w4BUunbLwcc9 L+Ci38g/aVx6Zcd3GoJlh+dQubz4W6cCPZRBONvhTsZUH5pAzrTh2skhXUAAQ8ic K30JGYP7a28Ls5KiSAhzZqD1Kz45u2J4vJ2SddRyhKfR3/QNHtPk1Qqp0A7QZFyV cBcACfUE7dHk3DMdndC4iJ+RNmfd6kWMXQCqpvD46KunVw0rkyTl4WaWJA3FgDhb P03HG+fRIamICN/J5JU3jOGrgUG0K/RnEIAQB4f3ubjzoWdLf18QAG75D8st8wGU nlQ9ABdTvna1lYXbh70+lzqBh+UO2ZB8M/ySubzdHny6TXg4NFTpjhNxgmVD3m0p hgAoewR13uoRkytThXzK1kwkV2z5yjB8uUj0Jmn1uiv0RwLhvA+PzWd8e6EXqbgx yR52u8z8z/YgWDRz =kzef -----END PGP SIGNATURE----- Merge tag 'hwlock-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull hwspinlock updates from Bjorn Andersson: "This updates the sun6i DT binding to allow (and require) #hwlock-cells and makes use of device_match_of_node() to slight clean up the condition in of_hwspin_lock_get_id()" * tag 'hwlock-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: dt-bindings: hwlock: sun6i: Add #hwlock-cells to example dt-bindings: hwlock: sun6i: Add missing #hwlock-cells hwspinlock: Use device_match_of_node() |
||
|
Linus Torvalds
|
4b8c673b76 |
media updates for v6.3-rc1
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmP7M9AACgkQCF8+vY7k 4RVpxRAAjarn420frUo/YiMWuYiYtDCFmXj+toHgqsa9fcUOjxml9V+S5L0uY6tF D6d9KCgqKf1AO2MDzB3aR1qQmPfelMoSomQjsTm6cWaMPDobxpzL2IlcspMDBxz0 PyCz4R9cCK5kwuBiQlz3dE605/t/7JXOAFEopo5tvYWNfRt9YXFbPJ/Hdttc4cqw d6js3TN7oxHoa+t5Ox9Fq+i6MSxsMEku5RvfHVI6yUs//eWcf9H2zFfZ83vZ7+vY L8PlRzMXlvovsFwXivtiZdSkuwFloWrqIs8btHb1/psClOUxFQhpk2B4hkUixCAn wk9EN7eHWNdbaZha5//uPRmxUjjhIn4XAIXnfslsB7iiRn7uJtYryUnt+b+kD3Lt dtF2i1W7nNfUd5e7YRjipTjgjtazLpeyDGvH0TqfpwK8Wn10Acj+Az1v4bjf+cc0 GC1EVUtGeJhexYzLsHSQMQZB1IgFxUw5LNKdqsrboled3yvxfgK69Yp9FQLon9vZ R7KEDHuzt+e4Kihxq8dTp6wMV47dNrq0wpJKMjfylKhq/MPqa9uiygl1s2KlMg6n HDJQlYbQGlzrgHDDQRhYUAgxs3JeyxAmup2eLR6dWrAqBW+ULT9S2DiggOk9xxKg UkaCkodr3ZOhZti+oLRRAY2cRsGYgan7rKhscd0t7opO+CrfHxo= =0XIw -----END PGP SIGNATURE----- Merge tag 'media/v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Removal of several VB1-only deprecated drivers: cpia2, fsl-viu, meye, stkwebcam, tm6000, vpfe_capture and zr364xx - saa7146 recovered from staging/deprecated. We opted to give ti a chance, and, instead of deprecating it, the intention is to write patches migrating it from VB1 to VB2. - av7110 returned from staging/deprecated/ to staging/ as we're not planning on dropping it any time soon - media controller API has gained experimental support for G_ROUTING and streams API. No drivers use it right now. We're planning to add one after -rc1, giving some time to experience the API and eventually have changes during the next development cycle - New sensor drivers: imx296, imx415, ov8858 - Atomisp had lots of changes, specially on its sensor's interface, making atomisp sensor drivers closer to normal sensor drivers - media controller kAPI has gained some helpers to traverse pipelines - uvcvideo now better support power line control - lots of bug fixes, cleanups and driver improvements * tag 'media/v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (296 commits) media: imx-mipi-csis: Check csis_fmt validity before use media: v4l2-subdev.c: clear stream field media: v4l2-ctrls-api.c: move ctrl->is_new = 1 to the correct line media: Revert "media: saa7146: deprecate hexium_gemini/orion, mxb and ttpci" media: Revert "media: av7110: move to staging/media/deprecated/saa7146" media: imx-pxp: convert to regmap media: imx-pxp: Use non-threaded IRQ media: imx-pxp: Introduce pxp_read() and pxp_write() wrappers media: imx-pxp: Implement frame size enumeration media: imx-pxp: Pass pixel format value to find_format() media: imx-pxp: Add media controller support media: imx-pxp: Don't set bus_info manually in .querycap() media: imx-pxp: Sort headers alphabetically media: imx-pxp: add support for i.MX7D media: imx-pxp: make data_path_ctrl0 platform dependent media: imx-pxp: disable LUT block media: imx-pxp: explicitly disable unused blocks media: imx-pxp: extract helper function to setup data path media: imx-pxp: detect PXP version media: dt-bindings: media: fsl-pxp: convert to yaml ... |
||
|
Linus Torvalds
|
1ec35eadc3 |
We have one small patch to the clk core this time around. It fixes a corner
case with the CLK_OPS_PARENT_ENABLE flag combined with clk_core_is_enabled()
where it hangs the system. We'll simply assume the clk is disabled if the
parent is disabled and the flag is set. Trying to turn on the parent to check
the enable state of the clk runs into system hangs at boot. We let this bake in
-next for a couple weeks to make sure there aren't any more issues because the
last attempt to fix this ran into hangs and had to be reverted.
Note: There were some more patches to the core framework around sync_state and
disabling unused clks, but I asked for that to be reverted from the qcom PR
because it isn't ready and we're still discussing the best solution on the
list.
Outside of the core clk framework, we have the usual collection of clk driver
updates and support for new SoCs (which seems to never stop). The dirstat is
dominated by Qualcomm because they added support for quite a few SoCs this time
around and also migrated quite a few of their drivers to clk_parent_data. The
other big diff is in the Mediatek clk drivers that saw a significant rework
this cycle to similarly modernize the code, and we'll see that work continue in
the next cycle as well. Nothing really jumps out as scary here, except that the
significant churn in parent data descriptions can have typos that go unnoticed.
More details below.
Core:
- Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()
New Drivers:
- Add a new clk-gpr-mux clock type and use it on i.MX6Q to add ENET ref
clocks
- Support for Mediatek MT7891 SoC clks
- Support for many Qualcomm clk controllers:
- QDU1000/QRU1000 global clock controller
- SA8775P global clock controller
- SM8550 TCSR and display clock controller
- SM6350 clock controller
- MSM8996 CBF and APCS clock controllers
Updates:
- Various cleanups and improvements to Mediatek clk drivers to reduce
code size and modernize the drivers
- Support for Versa 5P49V60 clks
- Disable R-Car H3 ES1.*, as it was only available to an internal
development group and needed a lot of quirks and workarounds
- Add PWM, Compare-Match Timer (TIM), USB, SDHI, and eMMC clocks and
resets on Renesas RZ/V2M
- Add display clocks on Renesas R-Car V4H
- Add Camera Receiving Unit (CRU) clocks and resets on Renesas RZ/G2L
- Free the imx_uart_clocks even if imx_register_uart_clocks returns early
- Get the stdout clocks count from device tree on i.MX
- Drop the clock count argument from imx_register_uart_clocks()
- Keep the uart clocks on i.MX93 for when earlycon is used
- Fix SPDX comment in i.MX6SLL clocks bindings header
- Drop some unnecessary spaces from i.MX8ULP clocks bindings header
- Add imx_obtain_fixed_of_clock() for allowing to add a clock that is
not configured via devicetree
- Fix the ENET1 gate configuration for i.MX6UL according to the
reference manual
- Add ENET refclock mux support for i.MX6UL
- Add support for USB host/device configuration on Renesas RZ/N1
- Add PLL2 programming support, and CAN-FD clocks on Renesas R-Car V4H
- Add D1 CAN bus gates and resets for Allwinner
- Mark D1 CPUX clock as critical on Allwinner
- Reuse D1 driver for Allwinner R528/T113
- Cleanup sunxi-ng Kconfig
- Fix sunxi-ng kernel-doc issues
- Model Allwinner H3/H5 DRAM clock as fixed clock
- Use .determine_rate() instead of .round_rate() for the dualdiv, mpll,
sclk-div and cpu-dyn-div amlogic clock drivers
- DDR clocks were marked as critical in the proper clock driver for each
AT91 SoC such that drivers/memory/atmel-sdramc.c to be deleted
in the next releases as it only does clock enablement
- Patch to avoid compiling dt-compat.o for all AT91 SoCs as only some of
them may use it
- Support synchronous power_off requests in the qcom GDSC driver for proper
GPU power collapse
- Drop test clocks from various Qualcomm clk drivers
- Update parent references to use clk_parent_data/clk_hw in various Qualcomm clk drivers
- Fixes for the Qualcomm MSM8996 CPU clock controller
- Transition Qualcomm MSM8974 GCC off the externally defined sleep_clk
- Add GDSCs in the global clock controller for Qualcomm QCS404
- The SDCC core clocks on Qualcomm SM6115 are moved to floor_ops
- Programming of clk_dis_wait for GPU CX GDSC on Qualcomm SC7180 and SDM845 are
moved to use the recently introduced properties in the GDSC struct
- Qualcomm's RPMh clock driver gains SM8550 and SA8775P clocks, and the IPA clock
is added on a variety of platforms
- De-duplicate identical clks in Qualcomm SMD RPM clk driver
- Add a few missing clocks across msm8998, msm8992, msm8916, qcs404 to
Qualcomm SDM RPM clk driver
- Various Qualcomm clk drivers use devm_pm_runtime_enable() to simplify
-----BEGIN PGP SIGNATURE-----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=Fle/
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"We have one small patch to the clk core this time around. It fixes a
corner case with the CLK_OPS_PARENT_ENABLE flag combined with
clk_core_is_enabled() where it hangs the system. We'll simply assume
the clk is disabled if the parent is disabled and the flag is set.
Trying to turn on the parent to check the enable state of the clk runs
into system hangs at boot. We let this bake in -next for a couple
weeks to make sure there aren't any more issues because the last
attempt to fix this ran into hangs and had to be reverted.
Note: There were some more patches to the core framework around
sync_state and disabling unused clks, but I asked for that to be
reverted from the qcom PR because it isn't ready and we're still
discussing the best solution on the list.
Outside of the core clk framework, we have the usual collection of clk
driver updates and support for new SoCs (which seems to never stop).
The dirstat is dominated by Qualcomm because they added support for
quite a few SoCs this time around and also migrated quite a few of
their drivers to clk_parent_data. The other big diff is in the
Mediatek clk drivers that saw a significant rework this cycle to
similarly modernize the code, and we'll see that work continue in the
next cycle as well. Nothing really jumps out as scary here, except
that the significant churn in parent data descriptions can have typos
that go unnoticed. More details below.
Core:
- Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()
New Drivers:
- Add a new clk-gpr-mux clock type and use it on i.MX6Q to add ENET
ref clocks
- Support for Mediatek MT7891 SoC clks
- Support for many Qualcomm clk controllers:
- QDU1000/QRU1000 global clock controller
- SA8775P global clock controller
- SM8550 TCSR and display clock controller
- SM6350 clock controller
- MSM8996 CBF and APCS clock controllers
Updates:
- Various cleanups and improvements to Mediatek clk drivers to reduce
code size and modernize the drivers
- Support for Versa 5P49V60 clks
- Disable R-Car H3 ES1.*, as it was only available to an internal
development group and needed a lot of quirks and workarounds
- Add PWM, Compare-Match Timer (TIM), USB, SDHI, and eMMC clocks and
resets on Renesas RZ/V2M
- Add display clocks on Renesas R-Car V4H
- Add Camera Receiving Unit (CRU) clocks and resets on Renesas RZ/G2L
- Free the imx_uart_clocks even if imx_register_uart_clocks returns
early
- Get the stdout clocks count from device tree on i.MX
- Drop the clock count argument from imx_register_uart_clocks()
- Keep the uart clocks on i.MX93 for when earlycon is used
- Fix SPDX comment in i.MX6SLL clocks bindings header
- Drop some unnecessary spaces from i.MX8ULP clocks bindings header
- Add imx_obtain_fixed_of_clock() for allowing to add a clock that is
not configured via devicetree
- Fix the ENET1 gate configuration for i.MX6UL according to the
reference manual
- Add ENET refclock mux support for i.MX6UL
- Add support for USB host/device configuration on Renesas RZ/N1
- Add PLL2 programming support, and CAN-FD clocks on Renesas R-Car
V4H
- Add D1 CAN bus gates and resets for Allwinner
- Mark D1 CPUX clock as critical on Allwinner
- Reuse D1 driver for Allwinner R528/T113
- Cleanup sunxi-ng Kconfig
- Fix sunxi-ng kernel-doc issues
- Model Allwinner H3/H5 DRAM clock as fixed clock
- Use .determine_rate() instead of .round_rate() for the dualdiv,
mpll, sclk-div and cpu-dyn-div amlogic clock drivers
- DDR clocks were marked as critical in the proper clock driver for
each AT91 SoC such that drivers/memory/atmel-sdramc.c to be deleted
in the next releases as it only does clock enablement
- Patch to avoid compiling dt-compat.o for all AT91 SoCs as only some
of them may use it
- Support synchronous power_off requests in the qcom GDSC driver for
proper GPU power collapse
- Drop test clocks from various Qualcomm clk drivers
- Update parent references to use clk_parent_data/clk_hw in various
Qualcomm clk drivers
- Fixes for the Qualcomm MSM8996 CPU clock controller
- Transition Qualcomm MSM8974 GCC off the externally defined
sleep_clk
- Add GDSCs in the global clock controller for Qualcomm QCS404
- The SDCC core clocks on Qualcomm SM6115 are moved to floor_ops
- Programming of clk_dis_wait for GPU CX GDSC on Qualcomm SC7180 and
SDM845 are moved to use the recently introduced properties in the
GDSC struct
- Qualcomm's RPMh clock driver gains SM8550 and SA8775P clocks, and
the IPA clock is added on a variety of platforms
- De-duplicate identical clks in Qualcomm SMD RPM clk driver
- Add a few missing clocks across msm8998, msm8992, msm8916, qcs404
to Qualcomm SDM RPM clk driver
- Various Qualcomm clk drivers use devm_pm_runtime_enable() to
simplify"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (228 commits)
clk: qcom: apcs-msm8986: Include bitfield.h for FIELD_PREP
clk: qcom: Revert sync_state based clk_disable_unused
clk: imx: pll14xx: fix recalc_rate for negative kdiv
clk: rs9: Drop unused pin_xin field
MAINTAINERS: clk: imx: Add Peng Fan as reviewer
clk: sprd: Add dependency for SPRD_UMS512_CLK
clk: ralink: fix 'mt7621_gate_is_enabled()' function
clk: mediatek: clk-mtk: Remove unneeded semicolon
dt-bindings: clock: remove stih416 bindings
dt-bindings: clock: add loongson-2 clock
dt-bindings: clock: add loongson-2 clock include file
clk: imx: fix compile testing imxrt1050
clk: Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()
clk: imx: set imx_clk_gpr_mux_ops storage-class-specifier to static
clk: renesas: rcar-gen3: Disable R-Car H3 ES1.*
dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml
clk: qcom: gpucc-sdm845: fix clk_dis_wait being programmed for CX GDSC
clk: qcom: gpucc-sc7180: fix clk_dis_wait being programmed for CX GDSC
dt-bindings: clock: qcom,sa8775p-gcc: add the power-domains property
clk: qcom: cpu-8996: add missing cputype include
...
|
||
|
Linus Torvalds
|
562ed38ded |
- qcom: misc changes to bindings for sa8775p, QDU1000/QRU1000,
IPQ5332, SDX55, msm8976, glink-rpm-edge - sti: convert to DT schema - zynq: switch to flexible array to simplify code -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE6EwehDt/SOnwFyTyf9lkf8eYP5UFAmP31HcACgkQf9lkf8eY P5VLvw//RKuLIf2ZE47OgSTzsm6uK0+aYOkhGernTEcvoLtLaGr8pYmc+iOMxEod 9QN+iLVK15jOG2yPIDQcgekDrV9OZs2Cp8MlUw6CykzrVhHv3ZnP7AVRQMrhqSWv pU6Cs6N1OvdKHVKNrXyT64h2Fj732x0kXUnVR/NKHTs2nqiSZwsLYsZypBRsfMsS ClMNKM3wWQC3GQWhvFAa9annvpBLt1PasCagPCG2asxSeyDxKHVcEedMmol0LW// fRqe0FGWVYLjRDHeFKnhI61o1pQHlrD/VwijKOqFBvbltrriE2RqK36nTLmu7j29 V+b0dBJ0vuNbCy7ZdVCn0GkiCLcIHM5qF06NqSkiX1ljr9BJ1JaSTbwS9sq0NfmJ 6loodEwix2YGirfziFDhh/kgui3LyiOjj18171GtRxPIo9v/GmofqDVu9D63S+SZ WzuY6etFxDGtwPSVJ9mjWJ/T79abaDBLsRwnTm43z5RPD2mdXbwGC3sYuJ8piop9 XyVarJZRshWtEsWtoTfky5EImwI3zNGWsZa8kDTSM2jWdBMBJcNPMTgO1oPRUmMx i1pp96obJD/yTBBPtwDl/l4mqQRasJ/2ZScILHtIncUxNwQH0kwK8eYph3+vWwIh ubHSFe/93neXhOCmph8Jkr7ugXga+ANeeFf/WAgzafKJ0EhLQSs= =gJmh -----END PGP SIGNATURE----- Merge tag 'mailbox-v6.3' of git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - qcom: misc changes to bindings for sa8775p, QDU1000/QRU1000, IPQ5332, SDX55, msm8976, glink-rpm-edge - sti: convert to DT schema - zynq: switch to flexible array to simplify code * tag 'mailbox-v6.3' of git://git.linaro.org/landing-teams/working/fujitsu/integration: dt-bindings: mailbox: qcom-ipcc: Add compatible for QDU1000/QRU1000 mailbox: qcom-apcs-ipc: add IPQ5332 APSS clock support dt-bindings: mailbox: qcom: add compatible for the IPQ5332 SoC dt-bindings: remoteproc: qcom,glink-rpm-edge: convert to DT schema mailbox: qcom-apcs-ipc: enable APCS clock device for MSM8996 dt-bindings: mailbox: qcom: add #clock-cells to msm8996 example dt-bindings: mailbox: qcom: add missing platforms to conditional clauses dt-bindings: mailbox: qcom: correct the list of platforms using clocks dt-bindings: mailbox: qcom: enable syscon compatible for msm8976 dt-bindings: mailbox: qcom: add SDX55 compatible dt-bindings: mailbox: qcom-ipcc: document the sa8775p platform dt-bindings: mailbox: sti-mailbox: convert to DT schema mailbox: zynq: Switch to flexible array to simplify code |
||
|
Linus Torvalds
|
2e3036a264 |
MTD changes:
* parsers: ofpart: add workaround for #size-cells 0
* dt-bindings: partitions: Fix partition node name pattern
* dataflash: remove duplicate SPI ID table
Raw NAND core changes:
* Check the data only read pattern only once
* Prepare the late addition of supported operation checks
* Support for sequential cache reads
* Fix nand_chip kdoc
Raw NAND driver changes:
* Fsl_elbc: Propagate HW ECC settings to HW
* Marvell: Add missing layouts
* Pasemi: Don't use static data to track per-device state
* Sunxi:
- Fix the size of the last OOB region
- Remove an unnecessary check
- Remove an unnecessary check
- Clean up chips after failed init
- Precompute the ECC_CTL register value
- Embed sunxi_nand_hw_ecc by value
- Update OOB layout to match hardware
* tmio_nand: Remove driver
* vf610_nfc: Use regular comments for functions
SPI-NAND driver changes:
* Add support for AllianceMemory AS5F34G04SND
* Macronix: use scratch buffer for DMA operation
NAND ECC changes:
* Mediatek:
- Add ECC support fot MT7986 IC
- Add compatible for MT7986
- dt-bindings: Split ECC engine with rawnand controller
SPI NOR changes:
* Misc core fixes
SPI NOR driver changes:
* Spansion: Minor fixes
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmP3MqwACgkQJWrqGEe9
VoTnsQf/bfzBqf0LbMBU7c+2VUjnE2dgLRssf0WqJB2INvDIAHQ8HKE2rqF6j1G0
wBnJOMf9fRpH6M3k45siNL37HPnacUq8QFZE3B3A3pUewWNtx5ldFrzT1awlsTu8
zIG37pnd2rJ+W3wfDDnNjTqQUfm3sLI7k/B3S8aqJA8i63DFLqih7ju0mgPVT7TX
C1X0VAx8gNMHQ6WqTX53SRZ4Ef9dJAcVwcFhkjHY09Q9VEW56ZlQ7uxyhwYqXjiJ
zDDGfPFhAsfwcykdFI3DtvNRT2bVbJl7N4GvTD8N4Rf+GIuMhVJnUjp5yTkAeEHx
HjXqBSI3ykHimsW7BRtE3HLR4775bA==
=FLt2
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD changes:
- parsers: ofpart: add workaround for #size-cells 0
- dt-bindings: partitions: Fix partition node name pattern
- dataflash: remove duplicate SPI ID table
Raw NAND core changes:
- Check the data only read pattern only once
- Prepare the late addition of supported operation checks
- Support for sequential cache reads
- Fix nand_chip kdoc
Raw NAND driver changes:
- Fsl_elbc: Propagate HW ECC settings to HW
- Marvell: Add missing layouts
- Pasemi: Don't use static data to track per-device state
- Sunxi:
- Fix the size of the last OOB region
- Remove an unnecessary check
- Remove an unnecessary check
- Clean up chips after failed init
- Precompute the ECC_CTL register value
- Embed sunxi_nand_hw_ecc by value
- Update OOB layout to match hardware
- tmio_nand: Remove driver
- vf610_nfc: Use regular comments for functions
SPI-NAND driver changes:
- Add support for AllianceMemory AS5F34G04SND
- Macronix: use scratch buffer for DMA operation
NAND ECC changes:
- Mediatek:
- Add ECC support fot MT7986 IC
- Add compatible for MT7986
- dt-bindings: Split ECC engine with rawnand controller
SPI NOR changes:
- Misc core fixes
SPI NOR driver changes:
- Spansion: Minor fixes"
* tag 'mtd/for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (33 commits)
mtd: parsers: ofpart: add workaround for #size-cells 0
mtd: rawnand: sunxi: Precompute the ECC_CTL register value
mtd: rawnand: sunxi: Embed sunxi_nand_hw_ecc by value
mtd: rawnand: sunxi: Update OOB layout to match hardware
mtd: spi-nor: Sort headers alphabetically
mtd: spi-nor: Fix shift-out-of-bounds in spi_nor_set_erase_type
mtd: nand: ecc-mtk: Add ECC support fot MT7986 IC
dt-bindings: mtd: mediatek,nand-ecc-engine: Add compatible for MT7986
dt-bindings: mtd: Split ECC engine with rawnand controller
mtd: rawnand: fsl_elbc: Propagate HW ECC settings to HW
mtd: spinand: Add support for AllianceMemory AS5F34G04SND
dt-bindings: mtd: partitions: Fix partition node name pattern
mtd: spi-nor: Create macros to define chip IDs and geometries
mtd: spi-nor: spansion: Make CFRx reg fields generic
mtd: spi-nor: spansion: Consider reserved bits in CFR5 register
mtd: spi-nor: core: fix implicit declaration warning
mtd: spinand: macronix: use scratch buffer for DMA operation
mtd: rawnand: Fix nand_chip kdoc
mtd: rawnand: vf610_nfc: use regular comments for functions
mtd: rawnand: Support for sequential cache reads
...
|
||
|
Linus Torvalds
|
60e2bf7d10 |
Input updates for 6.3 merge window:
- a set of tweaks to iqs269a touch controller driver - a fix for ads7846 driver to properly handle 7845 chip - cap11xx driver will support cap1203, cap1293 and cap1298 models - xpad driver will support 8BitDo Pro 2 Wired Controller - input drivers have been switched to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() - other miscellaneous fixes and tweaks -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCY/hawQAKCRBAj56VGEWX nJQwAP91B7gi9zPBmnRCYB/tsfUQy8x8yQmfIolpfRZJL0o3CQD+OBeSioXufJ2l 06KCnNY/DVf6ky+mJGdPC2KaU6AHyAA= =94qv -----END PGP SIGNATURE----- Merge tag 'input-for-v6.3-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a set of tweaks to iqs269a touch controller driver - a fix for ads7846 driver to properly handle 7845 chip - cap11xx driver will support cap1203, cap1293 and cap1298 models - xpad driver will support 8BitDo Pro 2 Wired Controller - input drivers have been switched to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() - other miscellaneous fixes and tweaks * tag 'input-for-v6.3-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (113 commits) dt-bindings: input: iqs626a: Redefine trackpad property types Input: iqs626a - drop unused device node references dt-bindings: input: touchscreen: st,stmfts: convert to dtschema Input: cyttsp5 - fix bitmask for touch buttons Input: exc3000 - properly stop timer on shutdown Input: synaptics-rmi4 - fix SPI device ID Input: cap11xx - add support for cap1203, cap1293 and cap1298 dt-bindings: input: microchip,cap11xx: add cap1203, cap1293 and cap1298 Input: pmic8xxx-keypad - fix a Kconfig spelling mistake & hyphenation Input: edt-ft5x06 - fix typo in a comment Input: tegra-kbc - use devm_platform_get_and_ioremap_resource() Input: st-keyscan - use devm_platform_get_and_ioremap_resource() Input: spear-keyboard - use devm_platform_get_and_ioremap_resource() Input: olpc_apsp - use devm_platform_get_and_ioremap_resource() Input: arc_ps2 - use devm_platform_get_and_ioremap_resource() Input: apbps2 - use devm_platform_get_and_ioremap_resource() Input: altera_ps2 - use devm_platform_get_and_ioremap_resource() Input: ads7846 - don't check penirq immediately for 7845 Input: ads7846 - always set last command to PWRDOWN Input: ads7846 - don't report pressure for ads7845 ... |
||
Johan Hovold
|
430aa33a30 |
dt-bindings: rtc: qcom-pm8xxx: add nvmem-cell offset
On many Qualcomm platforms the PMIC RTC control and time registers are read-only so that the RTC time can not be updated. Instead an offset needs be stored in some machine-specific non-volatile memory, which a driver can take into account. Add an 'offset' nvmem cell which can be used to store a 32-bit offset from the Unix epoch so that the RTC time can be updated on such platforms. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: David Collins <quic_collinsd@quicinc.com> Link: https://lore.kernel.org/r/20230202155448.6715-17-johan+linaro@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> |
||
Alexandre Belloni
|
c978414bf5 |
RTC fixes for 6.2
Drivers: - efi: make WAKEUP services optional - sunplus: fix format string warning -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEBqsFVZXh8s/0O5JiY6TcMGxwOjIFAmPezxQACgkQY6TcMGxw OjK2hA/+IYuaQlorI5YEZcSDF/X3uU3vO0suNe3FQLxX6AB4obVw3goKIduqJG57 rE2QCvbR3xknsCu2a3X/MyKbZNyrPf5z18N7atLc3LIUHmoKu+6hlwFWQ2vkfZ+w j5HxzYNq5WU4xP88EyDy9yqr5AwFja5dGe/3NJaHXef8ZcL5CyIdWHybyb/QuikQ QrYqf48EwjfvqyNfAkTZQOtmRmgz3eI5GwV7ApREJO4SNb8oDlFUxCh2HQs1KDn6 9K8P0JcV1DzzxvnmeOnwDtdYPhesSzYjxn1Q45Q820hLkAOecPKxhmwEPkXzjLLP P/ZXpmH4caBlXJHJF8fn3vLbnuVIGYRKsFJ5UfhEAub3Yf0NP+BNvSvJLi6DuVhW alO/fCCxQlTBhobwteTWaFFDPEhcJCYH764WSWQEqnmQhU5LhEh1EaBCP24ziSjw HHakwLQFHQSSPddBpoOOHTc+2HyBw//AHZJzm14ofeB3QCoiDUzMcJjFUmTAtAl5 jPs+hE5OIkjLDiwBiFwaTW9O8wNXi4ruU94hv5XGhv8/bimvMrPFPTxux8nAs1kZ KUIfJWKc/hNdfmv36XQ9RFnVfl6dCbItr5HO/kyjVp9LvnrxqjVx56DFR7RoW1+g 4UCsYB9usW2nXVOnSg7yXcYVDKbI0mZkV6+3HDjy6pz0BzeUR7E= =w48A -----END PGP SIGNATURE----- Merge tag 'rtc-6.2-fixes' into rtc-next |
||
|
Linus Torvalds
|
01687e7c93 |
RISC-V Patches for the 6.3 Merge Window, Part 1
There's a bunch of fixes/cleanups throughout the tree as usual, but we
also have a handful of new features.
* Various improvements to the extension detection and alternative
patching infrastructure.
* Zbb-optimized string routines.
* Support for cpu-capacity in the RISC-V DT bindings.
* Zicbom no longer depends on toolchain support.
* Some performance and code size improvements to ftrace.
* Support for ARCH_WANT_LD_ORPHAN_WARN.
* Oops now contain the faulting instruction.
-----BEGIN PGP SIGNATURE-----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=XgYl
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.3-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
"There's a bunch of fixes/cleanups throughout the tree as usual, but we
also have a handful of new features:
- Various improvements to the extension detection and alternative
patching infrastructure
- Zbb-optimized string routines
- Support for cpu-capacity in the RISC-V DT bindings
- Zicbom no longer depends on toolchain support
- Some performance and code size improvements to ftrace
- Support for ARCH_WANT_LD_ORPHAN_WARN
- Oops now contain the faulting instruction"
* tag 'riscv-for-linus-6.3-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (67 commits)
RISC-V: add a spin_shadow_stack declaration
riscv: mm: hugetlb: Enable ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP
riscv: Add header include guards to insn.h
riscv: alternative: proceed one more instruction for auipc/jalr pair
riscv: Avoid enabling interrupts in die()
riscv, mm: Perform BPF exhandler fixup on page fault
RISC-V: take text_mutex during alternative patching
riscv: hwcap: Don't alphabetize ISA extension IDs
RISC-V: fix ordering of Zbb extension
riscv: jump_label: Fixup unaligned arch_static_branch function
RISC-V: Only provide the single-letter extensions in HWCAP
riscv: mm: fix regression due to update_mmu_cache change
scripts/decodecode: Add support for RISC-V
riscv: Add instruction dump to RISC-V splats
riscv: select ARCH_WANT_LD_ORPHAN_WARN for !XIP_KERNEL
riscv: vmlinux.lds.S: explicitly catch .init.bss sections from EFI stub
riscv: vmlinux.lds.S: explicitly catch .riscv.attributes sections
riscv: vmlinux.lds.S: explicitly catch .rela.dyn symbols
riscv: lds: define RUNTIME_DISCARD_EXIT
RISC-V: move some stray __RISCV_INSN_FUNCS definitions from kprobes
...
|
||
|
Linus Torvalds
|
8ff99ad04c |
phy-for-6.3
- Core support
- New devm_of_phy_optional_get() API with users and conversion
- New support:
- Mediatek MT7986 tphy support
- Qualcomm SM8550 UFS, PCIe, combo phy support, SM6115 / SM4250
USB3 phy support, SM6350 combo phy support, SM6125 UFS PHY
support amd SM8350 & SM8450 combo phy support
- Qualcomm SNPS eUSB2 eUSB2 repeater drivers
- Allwinner F1C100s USB PHY support
- Tegra xusb support for Tegra234
- Updates:
- Yaml conversion for Qualcomm pcie2 phy and usb-hsic-phy
- G4 mode support in Qualcomm UFS phy and support for various SoCs
- Yaml conversion for Meson usb2 phy
- TI Type C support for usb phy for j721
- Yaml conversion for Tegra xusb binding
-----BEGIN PGP SIGNATURE-----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=2g27
-----END PGP SIGNATURE-----
Merge tag 'phy-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"This features a bunch of new device support, a couple of new drivers,
yaml conversion and updates of a few drivers.
Core support:
- New devm_of_phy_optional_get() API with users and conversion
New hardware support:
- Mediatek MT7986 phy support
- Qualcomm SM8550 UFS, PCIe, combo phy support, SM6115 / SM4250 USB3
phy support, SM6350 combo phy support, SM6125 UFS PHY support amd
SM8350 & SM8450 combo phy support
- Qualcomm SNPS eUSB2 eUSB2 repeater drivers
- Allwinner F1C100s USB PHY support
- Tegra xusb support for Tegra234
Updates:
- Yaml conversion for Qualcomm pcie2 phy and usb-hsic-phy
- G4 mode support in Qualcomm UFS phy and support for various SoCs
- Yaml conversion for Meson usb2 phy
- TI Type C support for usb phy for j721
- Yaml conversion for Tegra xusb binding"
* tag 'phy-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (106 commits)
phy: qcom: phy-qcom-snps-eusb2: Add support for eUSB2 repeater
phy: qcom: Add QCOM SNPS eUSB2 repeater driver
dt-bindings: phy: qcom,snps-eusb2-phy: Add phys property for the repeater
dt-bindings: phy: Add qcom,snps-eusb2-repeater schema file
dt-bindings: phy: amlogic,g12a-usb3-pcie-phy: add missing optional phy-supply property
phy: rockchip-typec: Fix unsigned comparison with less than zero
phy: rockchip-typec: fix tcphy_get_mode error case
phy: qcom: snps-eusb2: Add missing headers
phy: qcom-qmp-combo: Add support for SM8550
phy: qcom-qmp: Add v6 DP register offsets
phy: qcom-qmp: pcs-usb: Add v6 register offsets
dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Document SM8550 compatible
phy: qcom: Add QCOM SNPS eUSB2 driver
dt-bindings: phy: Add qcom,snps-eusb2-phy schema file
phy: qcom-qmp-pcie: Add support for SM8550 g3x2 and g4x2 PCIEs
phy: qcom-qmp: qserdes-lane-shared: Add v6 register offsets
phy: qcom-qmp: qserdes-txrx: Add v6.20 register offsets
phy: qcom-qmp: pcs-pcie: Add v6.20 register offsets
phy: qcom-qmp: pcs-pcie: Add v6 register offsets
phy: qcom-qmp: pcs: Add v6.20 register offsets
...
|