mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-27 06:04:23 +08:00
a7e74510e0
3875 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Linus Torvalds
|
3efc57369a |
x86:
* KVM currently invalidates the entirety of the page tables, not just those for the memslot being touched, when a memslot is moved or deleted. The former does not have particularly noticeable overhead, but Intel's TDX will require the guest to re-accept private pages if they are dropped from the secure EPT, which is a non starter. Actually, the only reason why this is not already being done is a bug which was never fully investigated and caused VM instability with assigned GeForce GPUs, so allow userspace to opt into the new behavior. * Advertise AVX10.1 to userspace (effectively prep work for the "real" AVX10 functionality that is on the horizon). * Rework common MSR handling code to suppress errors on userspace accesses to unsupported-but-advertised MSRs. This will allow removing (almost?) all of KVM's exemptions for userspace access to MSRs that shouldn't exist based on the vCPU model (the actual cleanup is non-trivial future work). * Rework KVM's handling of x2APIC ICR, again, because AMD (x2AVIC) splits the 64-bit value into the legacy ICR and ICR2 storage, whereas Intel (APICv) stores the entire 64-bit value at the ICR offset. * Fix a bug where KVM would fail to exit to userspace if one was triggered by a fastpath exit handler. * Add fastpath handling of HLT VM-Exit to expedite re-entering the guest when there's already a pending wake event at the time of the exit. * Fix a WARN caused by RSM entering a nested guest from SMM with invalid guest state, by forcing the vCPU out of guest mode prior to signalling SHUTDOWN (the SHUTDOWN hits the VM altogether, not the nested guest) * Overhaul the "unprotect and retry" logic to more precisely identify cases where retrying is actually helpful, and to harden all retry paths against putting the guest into an infinite retry loop. * Add support for yielding, e.g. to honor NEED_RESCHED, when zapping rmaps in the shadow MMU. * Refactor pieces of the shadow MMU related to aging SPTEs in prepartion for adding multi generation LRU support in KVM. * Don't stuff the RSB after VM-Exit when RETPOLINE=y and AutoIBRS is enabled, i.e. when the CPU has already flushed the RSB. * Trace the per-CPU host save area as a VMCB pointer to improve readability and cleanup the retrieval of the SEV-ES host save area. * Remove unnecessary accounting of temporary nested VMCB related allocations. * Set FINAL/PAGE in the page fault error code for EPT violations if and only if the GVA is valid. If the GVA is NOT valid, there is no guest-side page table walk and so stuffing paging related metadata is nonsensical. * Fix a bug where KVM would incorrectly synthesize a nested VM-Exit instead of emulating posted interrupt delivery to L2. * Add a lockdep assertion to detect unsafe accesses of vmcs12 structures. * Harden eVMCS loading against an impossible NULL pointer deref (really truly should be impossible). * Minor SGX fix and a cleanup. * Misc cleanups Generic: * Register KVM's cpuhp and syscore callbacks when enabling virtualization in hardware, as the sole purpose of said callbacks is to disable and re-enable virtualization as needed. * Enable virtualization when KVM is loaded, not right before the first VM is created. Together with the previous change, this simplifies a lot the logic of the callbacks, because their very existence implies virtualization is enabled. * Fix a bug that results in KVM prematurely exiting to userspace for coalesced MMIO/PIO in many cases, clean up the related code, and add a testcase. * Fix a bug in kvm_clear_guest() where it would trigger a buffer overflow _if_ the gpa+len crosses a page boundary, which thankfully is guaranteed to not happen in the current code base. Add WARNs in more helpers that read/write guest memory to detect similar bugs. Selftests: * Fix a goof that caused some Hyper-V tests to be skipped when run on bare metal, i.e. NOT in a VM. * Add a regression test for KVM's handling of SHUTDOWN for an SEV-ES guest. * Explicitly include one-off assets in .gitignore. Past Sean was completely wrong about not being able to detect missing .gitignore entries. * Verify userspace single-stepping works when KVM happens to handle a VM-Exit in its fastpath. * Misc cleanups -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmb201AUHHBib256aW5p QHJlZGhhdC5jb20ACgkQv/vSX3jHroOM1gf+Ij7dpCh0KwoNYlHfW2aCHAv3PqQd cKMDSGxoCernbJEyPO/3qXNUK+p4zKedk3d92snW3mKa+cwxMdfthJ3i9d7uoNiw 7hAgcfKNHDZGqAQXhx8QcVF3wgp+diXSyirR+h1IKrGtCCmjMdNC8ftSYe6voEkw VTVbLL+tER5H0Xo5UKaXbnXKDbQvWLXkdIqM8dtLGFGLQ2PnF/DdMP0p6HYrKf1w B7LBu0rvqYDL8/pS82mtR3brHJXxAr9m72fOezRLEUbfUdzkTUi/b1vEe6nDCl0Q i/PuFlARDLWuetlR0VVWKNbop/C/l4EmwCcKzFHa+gfNH3L9361Oz+NzBw== =Q7kz -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull x86 kvm updates from Paolo Bonzini: "x86: - KVM currently invalidates the entirety of the page tables, not just those for the memslot being touched, when a memslot is moved or deleted. This does not traditionally have particularly noticeable overhead, but Intel's TDX will require the guest to re-accept private pages if they are dropped from the secure EPT, which is a non starter. Actually, the only reason why this is not already being done is a bug which was never fully investigated and caused VM instability with assigned GeForce GPUs, so allow userspace to opt into the new behavior. - Advertise AVX10.1 to userspace (effectively prep work for the "real" AVX10 functionality that is on the horizon) - Rework common MSR handling code to suppress errors on userspace accesses to unsupported-but-advertised MSRs This will allow removing (almost?) all of KVM's exemptions for userspace access to MSRs that shouldn't exist based on the vCPU model (the actual cleanup is non-trivial future work) - Rework KVM's handling of x2APIC ICR, again, because AMD (x2AVIC) splits the 64-bit value into the legacy ICR and ICR2 storage, whereas Intel (APICv) stores the entire 64-bit value at the ICR offset - Fix a bug where KVM would fail to exit to userspace if one was triggered by a fastpath exit handler - Add fastpath handling of HLT VM-Exit to expedite re-entering the guest when there's already a pending wake event at the time of the exit - Fix a WARN caused by RSM entering a nested guest from SMM with invalid guest state, by forcing the vCPU out of guest mode prior to signalling SHUTDOWN (the SHUTDOWN hits the VM altogether, not the nested guest) - Overhaul the "unprotect and retry" logic to more precisely identify cases where retrying is actually helpful, and to harden all retry paths against putting the guest into an infinite retry loop - Add support for yielding, e.g. to honor NEED_RESCHED, when zapping rmaps in the shadow MMU - Refactor pieces of the shadow MMU related to aging SPTEs in prepartion for adding multi generation LRU support in KVM - Don't stuff the RSB after VM-Exit when RETPOLINE=y and AutoIBRS is enabled, i.e. when the CPU has already flushed the RSB - Trace the per-CPU host save area as a VMCB pointer to improve readability and cleanup the retrieval of the SEV-ES host save area - Remove unnecessary accounting of temporary nested VMCB related allocations - Set FINAL/PAGE in the page fault error code for EPT violations if and only if the GVA is valid. If the GVA is NOT valid, there is no guest-side page table walk and so stuffing paging related metadata is nonsensical - Fix a bug where KVM would incorrectly synthesize a nested VM-Exit instead of emulating posted interrupt delivery to L2 - Add a lockdep assertion to detect unsafe accesses of vmcs12 structures - Harden eVMCS loading against an impossible NULL pointer deref (really truly should be impossible) - Minor SGX fix and a cleanup - Misc cleanups Generic: - Register KVM's cpuhp and syscore callbacks when enabling virtualization in hardware, as the sole purpose of said callbacks is to disable and re-enable virtualization as needed - Enable virtualization when KVM is loaded, not right before the first VM is created Together with the previous change, this simplifies a lot the logic of the callbacks, because their very existence implies virtualization is enabled - Fix a bug that results in KVM prematurely exiting to userspace for coalesced MMIO/PIO in many cases, clean up the related code, and add a testcase - Fix a bug in kvm_clear_guest() where it would trigger a buffer overflow _if_ the gpa+len crosses a page boundary, which thankfully is guaranteed to not happen in the current code base. Add WARNs in more helpers that read/write guest memory to detect similar bugs Selftests: - Fix a goof that caused some Hyper-V tests to be skipped when run on bare metal, i.e. NOT in a VM - Add a regression test for KVM's handling of SHUTDOWN for an SEV-ES guest - Explicitly include one-off assets in .gitignore. Past Sean was completely wrong about not being able to detect missing .gitignore entries - Verify userspace single-stepping works when KVM happens to handle a VM-Exit in its fastpath - Misc cleanups" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (127 commits) Documentation: KVM: fix warning in "make htmldocs" s390: Enable KVM_S390_UCONTROL config in debug_defconfig selftests: kvm: s390: Add VM run test case KVM: SVM: let alternatives handle the cases when RSB filling is required KVM: VMX: Set PFERR_GUEST_{FINAL,PAGE}_MASK if and only if the GVA is valid KVM: x86/mmu: Use KVM_PAGES_PER_HPAGE() instead of an open coded equivalent KVM: x86/mmu: Add KVM_RMAP_MANY to replace open coded '1' and '1ul' literals KVM: x86/mmu: Fold mmu_spte_age() into kvm_rmap_age_gfn_range() KVM: x86/mmu: Morph kvm_handle_gfn_range() into an aging specific helper KVM: x86/mmu: Honor NEED_RESCHED when zapping rmaps and blocking is allowed KVM: x86/mmu: Add a helper to walk and zap rmaps for a memslot KVM: x86/mmu: Plumb a @can_yield parameter into __walk_slot_rmaps() KVM: x86/mmu: Move walk_slot_rmaps() up near for_each_slot_rmap_range() KVM: x86/mmu: WARN on MMIO cache hit when emulating write-protected gfn KVM: x86/mmu: Detect if unprotect will do anything based on invalid_list KVM: x86/mmu: Subsume kvm_mmu_unprotect_page() into the and_retry() version KVM: x86: Rename reexecute_instruction()=>kvm_unprotect_and_retry_on_failure() KVM: x86: Update retry protection fields when forcing retry on emulation failure KVM: x86: Apply retry protection to "unprotect on failure" path KVM: x86: Check EMULTYPE_WRITE_PF_TO_SP before unprotecting gfn ... |
||
Linus Torvalds
|
5701725692 |
Rust changes for v6.12
Toolchain and infrastructure: - Support 'MITIGATION_{RETHUNK,RETPOLINE,SLS}' (which cleans up objtool warnings), teach objtool about 'noreturn' Rust symbols and mimic '___ADDRESSABLE()' for 'module_{init,exit}'. With that, we should be objtool-warning-free, so enable it to run for all Rust object files. - KASAN (no 'SW_TAGS'), KCFI and shadow call sanitizer support. - Support 'RUSTC_VERSION', including re-config and re-build on change. - Split helpers file into several files in a folder, to avoid conflicts in it. Eventually those files will be moved to the right places with the new build system. In addition, remove the need to manually export the symbols defined there, reusing existing machinery for that. - Relax restriction on configurations with Rust + GCC plugins to just the RANDSTRUCT plugin. 'kernel' crate: - New 'list' module: doubly-linked linked list for use with reference counted values, which is heavily used by the upcoming Rust Binder. This includes 'ListArc' (a wrapper around 'Arc' that is guaranteed unique for the given ID), 'AtomicTracker' (tracks whether a 'ListArc' exists using an atomic), 'ListLinks' (the prev/next pointers for an item in a linked list), 'List' (the linked list itself), 'Iter' (an iterator over a 'List'), 'Cursor' (a cursor into a 'List' that allows to remove elements), 'ListArcField' (a field exclusively owned by a 'ListArc'), as well as support for heterogeneous lists. - New 'rbtree' module: red-black tree abstractions used by the upcoming Rust Binder. This includes 'RBTree' (the red-black tree itself), 'RBTreeNode' (a node), 'RBTreeNodeReservation' (a memory reservation for a node), 'Iter' and 'IterMut' (immutable and mutable iterators), 'Cursor' (bidirectional cursor that allows to remove elements), as well as an entry API similar to the Rust standard library one. - 'init' module: add 'write_[pin_]init' methods and the 'InPlaceWrite' trait. Add the 'assert_pinned!' macro. - 'sync' module: implement the 'InPlaceInit' trait for 'Arc' by introducing an associated type in the trait. - 'alloc' module: add 'drop_contents' method to 'BoxExt'. - 'types' module: implement the 'ForeignOwnable' trait for 'Pin<Box<T>>' and improve the trait's documentation. In addition, add the 'into_raw' method to the 'ARef' type. - 'error' module: in preparation for the upcoming Rust support for 32-bit architectures, like arm, locally allow Clippy lint for those. Documentation: - https://rust.docs.kernel.org has been announced, so link to it. - Enable rustdoc's "jump to definition" feature, making its output a bit closer to the experience in a cross-referencer. - Debian Testing now also provides recent Rust releases (outside of the freeze period), so add it to the list. MAINTAINERS: - Trevor is joining as reviewer of the "RUST" entry. And a few other small bits. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPjU5OPd5QIZ9jqqOGXyLc2htIW0FAmbzNz4ACgkQGXyLc2ht IW3muA/9HcPL0QqVB5+SqSRqcatmrFU/wq8Oaa6Z/No0JaynqyikK+R1WNokUd/5 WpQi4PC1OYV+ekyAuWdkooKmaSqagH5r53XlezNw+cM5zo8y7p0otVlbepQ0t3Ky pVEmfDRIeSFXsKrg91BJUKyJf70TQlgSggDVCExlanfOjPz88C1+s3EcJ/XWYGKQ cRk/XDdbF5eNaldp2MriVF0fw7XktgIrmVzxt/z0lb4PE7RaCAnO6gSQI+90Vb2d zvyOYKS4AkqE3suFvDIIUlPUv+8XbACj0c4wvBZHH5uZGTbgWUffqygJ45GqChEt c4fS/+E8VaM1z0EvxNczC0nQkfLwkTc1mgbP+sG3VZJMPVCJ2zQan1/ond7GqCpw pt6uQaGvDsAvllm7sbiAIVaAY81icqyYWKfNBXLLEL7DhY5je5Wq+E83XQ8d5u5F EuapnZhW3y12d6UCsSe9bD8W45NFoWHPXky1TzT+whTxnX1yH9YsPXbJceGSbbgd Lw3GmUtZx2bVAMToVjNFD2lPA3OmPY1e2lk0jwzTuQrEXfnZYuzbjqs3YUijb7xR AlsWfIb0IHBwHWpB7da24ezqWP2VD4eaDdD8/+LmDSj6XLngxMNWRLKmXT000eTW vIFP9GJrvag2R3YFPhrurgGpRsp8HUTLtvcZROxp2JVQGQ7Z4Ww= =52BN -----END PGP SIGNATURE----- Merge tag 'rust-6.12' of https://github.com/Rust-for-Linux/linux Pull Rust updates from Miguel Ojeda: "Toolchain and infrastructure: - Support 'MITIGATION_{RETHUNK,RETPOLINE,SLS}' (which cleans up objtool warnings), teach objtool about 'noreturn' Rust symbols and mimic '___ADDRESSABLE()' for 'module_{init,exit}'. With that, we should be objtool-warning-free, so enable it to run for all Rust object files. - KASAN (no 'SW_TAGS'), KCFI and shadow call sanitizer support. - Support 'RUSTC_VERSION', including re-config and re-build on change. - Split helpers file into several files in a folder, to avoid conflicts in it. Eventually those files will be moved to the right places with the new build system. In addition, remove the need to manually export the symbols defined there, reusing existing machinery for that. - Relax restriction on configurations with Rust + GCC plugins to just the RANDSTRUCT plugin. 'kernel' crate: - New 'list' module: doubly-linked linked list for use with reference counted values, which is heavily used by the upcoming Rust Binder. This includes 'ListArc' (a wrapper around 'Arc' that is guaranteed unique for the given ID), 'AtomicTracker' (tracks whether a 'ListArc' exists using an atomic), 'ListLinks' (the prev/next pointers for an item in a linked list), 'List' (the linked list itself), 'Iter' (an iterator over a 'List'), 'Cursor' (a cursor into a 'List' that allows to remove elements), 'ListArcField' (a field exclusively owned by a 'ListArc'), as well as support for heterogeneous lists. - New 'rbtree' module: red-black tree abstractions used by the upcoming Rust Binder. This includes 'RBTree' (the red-black tree itself), 'RBTreeNode' (a node), 'RBTreeNodeReservation' (a memory reservation for a node), 'Iter' and 'IterMut' (immutable and mutable iterators), 'Cursor' (bidirectional cursor that allows to remove elements), as well as an entry API similar to the Rust standard library one. - 'init' module: add 'write_[pin_]init' methods and the 'InPlaceWrite' trait. Add the 'assert_pinned!' macro. - 'sync' module: implement the 'InPlaceInit' trait for 'Arc' by introducing an associated type in the trait. - 'alloc' module: add 'drop_contents' method to 'BoxExt'. - 'types' module: implement the 'ForeignOwnable' trait for 'Pin<Box<T>>' and improve the trait's documentation. In addition, add the 'into_raw' method to the 'ARef' type. - 'error' module: in preparation for the upcoming Rust support for 32-bit architectures, like arm, locally allow Clippy lint for those. Documentation: - https://rust.docs.kernel.org has been announced, so link to it. - Enable rustdoc's "jump to definition" feature, making its output a bit closer to the experience in a cross-referencer. - Debian Testing now also provides recent Rust releases (outside of the freeze period), so add it to the list. MAINTAINERS: - Trevor is joining as reviewer of the "RUST" entry. And a few other small bits" * tag 'rust-6.12' of https://github.com/Rust-for-Linux/linux: (54 commits) kasan: rust: Add KASAN smoke test via UAF kbuild: rust: Enable KASAN support rust: kasan: Rust does not support KHWASAN kbuild: rust: Define probing macros for rustc kasan: simplify and clarify Makefile rust: cfi: add support for CFI_CLANG with Rust cfi: add CONFIG_CFI_ICALL_NORMALIZE_INTEGERS rust: support for shadow call stack sanitizer docs: rust: include other expressions in conditional compilation section kbuild: rust: replace proc macros dependency on `core.o` with the version text kbuild: rust: rebuild if the version text changes kbuild: rust: re-run Kconfig if the version text changes kbuild: rust: add `CONFIG_RUSTC_VERSION` rust: avoid `box_uninit_write` feature MAINTAINERS: add Trevor Gross as Rust reviewer rust: rbtree: add `RBTree::entry` rust: rbtree: add cursor rust: rbtree: add mutable iterator rust: rbtree: add iterator rust: rbtree: add red-black tree implementation backed by the C version ... |
||
Linus Torvalds
|
97d8894b6f |
RISC-V Patches for the 6.12 Merge Window, Part 1
* Support for using Zkr to seed KASLR. * Support for IPI-triggered CPU backtracing. * Support for generic CPU vulnerabilities reporting to userspace. * A few cleanups for missing licenses. * The size limit on the XIP kernel has been removed. * Support for tracing userspace stacks. * Support for the Svvptc extension. * Various cleanups and fixes throughout the tree. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmbykZITHHBhbG1lckBk YWJiZWx0LmNvbQAKCRAuExnzX7sYiTDLEACABTPlMX+Ke1lMYWj6MLBTXMSlQJ6w TKLVk3slp4POPsd+ViWy4J6EJDpCkNp6iK30Bv4AGainA3RJnbS7neKYy+MTw0ZV pJWTn73sxHeF+APnZ+geFYcmyteL/SZplgHgwLipFaojs7i/+tOvLFRRD3LueCz6 Q6Muvke9R5uN6LL3tUrmIhJeyZjOwJtKEYoRz6Fo5Tq3RRK0VHYZkdpqRQ86rr9U yNbRNlBLlANstq8xjtiwm22ImPGIsvvhs0AvFft0H72zhf3Tfy0VcTLlDJYwkdKN Bz59v4N4jg1ajXuAsj4/BQdj5uRkzJNZ3Yq1yvMmGI+2UV1tInHEMeZi63+4gs8F 0FYCziA+j6/08u8v8CrwdDOpJ9Iq/NMV6359bt5ySu3rM6QnPRGnHGkv4Ptk9Oyh sSPiuHS8YxpRBOB8xXNp5xFipTZ4+65VqCz253pAsbbp5aZ/o9Jw/bbBFFWcSsRZ tV2xhELVzPiC7dowfYkQhcNZOLlCaJ/Mvo2nMOtjbUwzaXkcjIRcYEy7+dTlfXyr 3h5sStjWAKEmtLEvCYSI+lAT544tbV1x+lCMJGuvztapsTMtAP4GpQKblXl5qqnV L+VWIPJV1elI26H/p/Max9Z1s48NtfwoJSRL7Rnaya6uJ3iWG/BtajHlFbvgOkJf ObPZ//Yr9e91gg== =zDwL -----END PGP SIGNATURE----- Merge tag 'riscv-for-linus-6.12-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: - Support using Zkr to seed KASLR - Support IPI-triggered CPU backtracing - Support for generic CPU vulnerabilities reporting to userspace - A few cleanups for missing licenses - The size limit on the XIP kernel has been removed - Support for tracing userspace stacks - Support for the Svvptc extension - Various cleanups and fixes throughout the tree * tag 'riscv-for-linus-6.12-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (47 commits) crash: Fix riscv64 crash memory reserve dead loop perf/riscv-sbi: Add platform specific firmware event handling tools: Optimize ring buffer for riscv tools: Add riscv barrier implementation RISC-V: Don't have MAX_PHYSMEM_BITS exceed phys_addr_t ACPI: NUMA: initialize all values of acpi_early_node_map to NUMA_NO_NODE riscv: Enable bitops instrumentation riscv: Omit optimized string routines when using KASAN ACPI: RISCV: Make acpi_numa_get_nid() to be static riscv: Randomize lower bits of stack address selftests: riscv: Allow mmap test to compile on 32-bit riscv: Make riscv_isa_vendor_ext_andes array static riscv: Use LIST_HEAD() to simplify code riscv: defconfig: Disable RZ/Five peripheral support RISC-V: Implement kgdb_roundup_cpus() to enable future NMI Roundup riscv: avoid Imbalance in RAS riscv: cacheinfo: Add back init_cache_level() function riscv: Remove unused _TIF_WORK_MASK drivers/perf: riscv: Remove redundant macro check riscv: define ILLEGAL_POINTER_VALUE for 64bit ... |
||
Linus Torvalds
|
4e2c9cd7dc |
i2c-for-6.12-rc1
I2C core ======== After 15 years of deprecation, the I2C_COMPAT symbol has finally been removed. Also client addresses are now locked during initialization to prevent race conditions between different kinds of instantiation. Scoped foreach OF child loops are now used. And the testunit has received some cleanups and documentation improvements as well as two new tests, one for repeated start and one for triggering SMBusAlert interrupts. I2C host drivers ================ The DesignWare and the Renesas I2C drivers have received most of the changes in this pull request. The first has has undergone through a series of cleanups that have been sent to the mailing list a year ago for the first time and finally get merged in this pull request. They are many, from typos (e.g. i2/i2c), to cosmetics, to refactoring (e.g. move inline functions to librarieas) and many others. Besides that, all the DesignWare Kconfig options have been grouped under the I2C_DESIGNWARE_CORE and this required some adaptation in many of the kernel configuration files for different arm and mips boards. Follows the list of the rest of the changes grouped by type of change. Cleanups -------- The Qualcomm Geni platform improves the exit path in the runtime resume function. The Intel LJCA driver loses "target_addr" parameter in ljca_i2c_stop() because it was unused. The MediaTek controller intializes the restart_flag in the transfer function using the ternary conditional operator ("? :") instead of initializing it in different parts. Constified a few global data structures in the virtio driver. The Renesas driver simplifies the bus speed handling in the init function making it more readable. Improved an if/else statement in probe function of the Renesas R-Car driver. The iMX/MXC driver switches to using the RUNTIME_PM_OPS() instead of SET_RUNTIME_PM_OPS(). Still in the iMX/MXC driver a comma ',' has been replaced by a semicolon ';', while in different drivers the ',' has been removed from the '{ }' delimiters. Finally three devm_clk_get_enabled() have been used to simplify the devm_clk_get/clk_prepare_enable tuple in the Renesas EMEV2, Ingenic and MPC drivers. Refactors --------- The Nuvoton fixes a potential out of boundary array access. This is not a bug fix because the issue could never occur due to hardware not having the properties listed in the array. The change makes the driver more future proof and, at the same time, silences code analyzers. Improvements ------------ The Renesas I2C (riic) driver undergoes several patches improving the runtime power management handling. The Intel i801 driver uses a more descriptive adapter's name to show the presence of the IDF feature. In the Intel Denverton (ismt) adapter the pending transactions are killed when irq's can't complete their handling, triggering a timeout. This could have been considered as a bug fix, but because, standing to Vasily, it's very sporadic, I preferred considering the patch rather as an improvement. New Feature ----------- The Renesas I2C (riic) driver now supports the fast mode plus. New support ----------- Added support for: - Renesas R9A08G045 - Rockchip RK3576 - KEBA I2C - Theobroma Systems Mule Multiplexer. The Keba comes with a new driver, i2c-keba.c. The Mule is an i2c multiplexer and it also comes with a new driver, mux/i2c-mux-mule.c. Core patch ---------- This pull request includes also a patch in the I2C framework, in i2c-core-base.c where the runtime PM functions have been replaced in order to allow to be accessed during the device add. Devicetree ---------- Some cleanups in the devicetree, as well. nVidia and Qualcomm bindings improve their "if:then:" blocks. While the aspeed binding loses the "multi-master" property because it was redundant. The i2c-sprd binding has been converted to YAML. AT24 updates ============ - document a new model from giantec in DT bindings -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEOZGx6rniZ1Gk92RdFA3kzBSgKbYFAmbxGRsACgkQFA3kzBSg KbY2IhAApRRZHNmxxcMRmxbDnbNweJdRGbtADEdkLMDui8oeK9SJHgScD0bR308p pkHEvyOg7UiW0N4wkaDK0YpORIrGSHys2DqIC05/OLPLONz2Ry/qKuNkisZBxo6l oP9uVKDMuCHgZq7xsxqupmpefMJ0m8XBGoMKPLbyBMu7ga4vB8o4uEQZfQLKs3YP mFm4plZvECCVPgJ5/bp43cFFmhfPLTd088k9/XzFwB730uXPO6VsBuaYzQ7tMOR3 NQCmh/8sFJmVlJvkTnQ5QRNTo2zn+hNmjV1avFJwo5lqz35TmfpVR/+TjYPwi9v6 7H5KjHrIxQHmeaLwm94wOuJSriFzQ3DUQkxvH7vRxXDef+6nTRdD6xC+zxePKLXo R4dYslP+5yXvtPYHonJUTXXZkfug58iO7W6Isc/5ody1y4FD22daTG5HXuWRlaAP 7O0kiyQmrwy5IZCqpwVPBJ7f+dpZzpCVP0OyXeHVXyK61rZT4zG9FvEiLQYjmYOn MOSbddFm5yQRu+OB8GVmYKlVlCG0S+Y11fFMCO/yJZQJqLXZm2AbonwB8sz0OqZu 4zDgXg+z3Xy/Go6/FFfjltoWq/9dYzzFzUi0oB6rm0U/pFawtCtAYhfCodzJDZI4 QvzALJuFWwQZjGNmqDVfYABcX8wFxE8zAteQy+htu0Fn7qSV7GU= =DTNY -----END PGP SIGNATURE----- Merge tag 'i2c-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "I2C core: - finally remove the I2C_COMPAT symbol after 15 years of deprecation - lock client addresses during initialization to prevent race conditions between different kinds of instantiation - use scoped foreach OF child loops - testunit cleanups and documentation improvements, as well as two new tests, one for repeated start and one for triggering SMBusAlert interrupts I2C host drivers: - DesignWare and Renesas I2C driver updates. The first has has undergone through a series of cleanups that have been sent to the mailing list a year ago for the first time and finally get merged in this pull request. They are many, from typos (e.g. i2/i2c), to cosmetics, to refactoring (e.g. move inline functions to librarieas) and many others. - all the DesignWare Kconfig options have been grouped under the I2C_DESIGNWARE_CORE and this required some adaptation in many of the kernel configuration files for different arm and mips boards Cleanups: - improve the exit path in the runtime resume function for the Qualcomm Geni platform - get rid of the unused "target_addr" parameter in the Intel LJCA driver - intialize the restart_flag in the MediaTek controller in one single place - constify a few global data structures in the virtio driver - simplify the bus speed handling in the Renesas driver init function making it more readable - improved probe function of the Renesas R-Car driver - switch the iMX/MXC driver to use RUNTIME_PM_OPS() instead of SET_RUNTIME_PM_OPS() - iMX/MXC driver cleanups - use devm_clk_get_enabled() to simplify the Renesas EMEV2, Ingenic and MPC drivers Refactoring: - Fix a potential out of boundary array access in the Nuvoton driver. This is not a bug fix because the issue could never occur due to hardware not having the properties listed in the array. The change makes the driver more future proof and, at the same time, silences code analyzers. Improvements: - several patches improving the runtime power management handling of the Renesas I2C (riic) driver - use a more descriptive adapter name in the Intel i801 driver to show the presence of the IDF feature - kill pending transactions when irq's can't complete their handling in the Intel Denverton (ismt) driver, triggering a timeout New Feature: - support fast mode plus in the Renesas I2C (riic) driver New support: - Added support for: - Renesas R9A08G045 - Rockchip RK3576 - KEBA I2C - Theobroma Systems Mule Multiplexer. - new i2c-keba.c driver - new driver for The Mule i2c multiplexer Core I2C framework: - move runtime PM functions in order to allow them to be accessed during device add Devicetree: - nVidia and Qualcomm binding improvements - get rid of redundant "multi-master" property in the aspeed binding - convert i2c-sprd binding to YAML AT24 updates: - document a new model from giantec in DT bindings" * tag 'i2c-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (69 commits) i2c: designware: Use pci_get_drvdata() i2c: designware: Propagate firmware node i2c: designware: Uninline i2c_dw_probe() i2c: ljca: Remove unused "target_addr" parameter i2c: keba: Add KEBA I2C controller support i2c: i801: Use a different adapter-name for IDF adapters i2c: core: Setup i2c_adapter runtime-pm before calling device_add() dt-bindings: i2c: i2c-sprd: convert to YAML i2c: ismt: kill transaction in hardware on timeout i2c: designware: Group all DesignWare drivers under a single option net: txgbe: Fix I2C Kconfig dependencies RISC-V: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM mips: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM arm64: defconfig: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM ARM: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM ARC: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM i2c: virtio: Constify struct i2c_algorithm and struct virtio_device_id i2c: rcar: tidyup priv->devtype handling on rcar_i2c_probe() i2c: imx: Convert comma to semicolon i2c: jz4780: Use devm_clk_get_enabled() helpers ... |
||
Linus Torvalds
|
7856a56541 |
Many singleton patches - please see the various changelogs for details.
Quite a lot of nilfs2 work this time around. Notable patch series in this pull request are: "mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64() to provide (much) more accurate results. The current implementation was causing Uwe some issues in the PWM drivers. "xz: Updates to license, filters, and compression options" from Lasse Collin. Miscellaneous maintenance and kinor feature work to the xz decompressor. "Fix some GDB command error and add some GDB commands" from Kuan-Ying Lee. Fixes and enhancements to the gdb scripts. "treewide: add missing MODULE_DESCRIPTION() macros" from Jeff Johnson. Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of warnings about this. "nilfs2: add support for some common ioctls" from Ryusuke Konishi. Adds various commonly-available ioctls to nilfs2. "This series fixes a number of formatting issues in kernel doc comments" from Ryusuke Konishi does that. "nilfs2: prevent unexpected ENOENT propagation" from Ryusuke Konishi. Fix issues where -ENOENT was being unintentionally and inappropriately returned to userspace. "nilfs2: assorted cleanups" from Huang Xiaojia. "nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke Konishi fixes some issues which can occur on corrupted nilfs2 filesystems. "scripts/decode_stacktrace.sh: improve error reporting and usability" from Luca Ceresoli does those things. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZu7dpAAKCRDdBJ7gKXxA jsPqAPwMDEZyKlfSw7QioEHNHDkmkbP7VYCYR0CbUnppbztwpAD8D37aVbWQ+UzM 3nnOq3W2Pc2o/20zqi8Upf1mnvUrygQ= =/NWE -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: "Many singleton patches - please see the various changelogs for details. Quite a lot of nilfs2 work this time around. Notable patch series in this pull request are: - "mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64() to provide (much) more accurate results. The current implementation was causing Uwe some issues in the PWM drivers. - "xz: Updates to license, filters, and compression options" from Lasse Collin. Miscellaneous maintenance and kinor feature work to the xz decompressor. - "Fix some GDB command error and add some GDB commands" from Kuan-Ying Lee. Fixes and enhancements to the gdb scripts. - "treewide: add missing MODULE_DESCRIPTION() macros" from Jeff Johnson. Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of warnings about this. - "nilfs2: add support for some common ioctls" from Ryusuke Konishi. Adds various commonly-available ioctls to nilfs2. - "This series fixes a number of formatting issues in kernel doc comments" from Ryusuke Konishi does that. - "nilfs2: prevent unexpected ENOENT propagation" from Ryusuke Konishi. Fix issues where -ENOENT was being unintentionally and inappropriately returned to userspace. - "nilfs2: assorted cleanups" from Huang Xiaojia. - "nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke Konishi fixes some issues which can occur on corrupted nilfs2 filesystems. - "scripts/decode_stacktrace.sh: improve error reporting and usability" from Luca Ceresoli does those things" * tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (103 commits) list: test: increase coverage of list_test_list_replace*() list: test: fix tests for list_cut_position() proc: use __auto_type more treewide: correct the typo 'retun' ocfs2: cleanup return value and mlog in ocfs2_global_read_info() nilfs2: remove duplicate 'unlikely()' usage nilfs2: fix potential oob read in nilfs_btree_check_delete() nilfs2: determine empty node blocks as corrupted nilfs2: fix potential null-ptr-deref in nilfs_btree_insert() user_namespace: use kmemdup_array() instead of kmemdup() for multiple allocation tools/mm: rm thp_swap_allocator_test when make clean squashfs: fix percpu address space issues in decompressor_multi_percpu.c lib: glob.c: added null check for character class nilfs2: refactor nilfs_segctor_thread() nilfs2: use kthread_create and kthread_stop for the log writer thread nilfs2: remove sc_timer_task nilfs2: do not repair reserved inode bitmap in nilfs_new_inode() nilfs2: eliminate the shared counter and spinlock for i_generation nilfs2: separate inode type information from i_state field nilfs2: use the BITS_PER_LONG macro ... |
||
Linus Torvalds
|
617a814f14 |
ALong with the usual shower of singleton patches, notable patch series in
this pull request are: "Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds consistency to the APIs and behaviour of these two core allocation functions. This also simplifies/enables Rustification. "Some cleanups for shmem" from Baolin Wang. No functional changes - mode code reuse, better function naming, logic simplifications. "mm: some small page fault cleanups" from Josef Bacik. No functional changes - code cleanups only. "Various memory tiering fixes" from Zi Yan. A small fix and a little cleanup. "mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and simplifications and .text shrinkage. "Kernel stack usage histogram" from Pasha Tatashin and Shakeel Butt. This is a feature, it adds new feilds to /proc/vmstat such as $ grep kstack /proc/vmstat kstack_1k 3 kstack_2k 188 kstack_4k 11391 kstack_8k 243 kstack_16k 0 which tells us that 11391 processes used 4k of stack while none at all used 16k. Useful for some system tuning things, but partivularly useful for "the dynamic kernel stack project". "kmemleak: support for percpu memory leak detect" from Pavel Tikhomirov. Teaches kmemleak to detect leaksage of percpu memory. "mm: memcg: page counters optimizations" from Roman Gushchin. "3 independent small optimizations of page counters". "mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from David Hildenbrand. Improves PTE/PMD splitlock detection, makes powerpc/8xx work correctly by design rather than by accident. "mm: remove arch_make_page_accessible()" from David Hildenbrand. Some folio conversions which make arch_make_page_accessible() unneeded. "mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David Finkel. Cleans up and fixes our handling of the resetting of the cgroup/process peak-memory-use detector. "Make core VMA operations internal and testable" from Lorenzo Stoakes. Rationalizaion and encapsulation of the VMA manipulation APIs. With a view to better enable testing of the VMA functions, even from a userspace-only harness. "mm: zswap: fixes for global shrinker" from Takero Funaki. Fix issues in the zswap global shrinker, resulting in improved performance. "mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill in some missing info in /proc/zoneinfo. "mm: replace follow_page() by folio_walk" from David Hildenbrand. Code cleanups and rationalizations (conversion to folio_walk()) resulting in the removal of follow_page(). "improving dynamic zswap shrinker protection scheme" from Nhat Pham. Some tuning to improve zswap's dynamic shrinker. Significant reductions in swapin and improvements in performance are shown. "mm: Fix several issues with unaccepted memory" from Kirill Shutemov. Improvements to the new unaccepted memory feature, "mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on DAX PUDs. This was missing, although nobody seems to have notied yet. "Introduce a store type enum for the Maple tree" from Sidhartha Kumar. Cleanups and modest performance improvements for the maple tree library code. "memcg: further decouple v1 code from v2" from Shakeel Butt. Move more cgroup v1 remnants away from the v2 memcg code. "memcg: initiate deprecation of v1 features" from Shakeel Butt. Adds various warnings telling users that memcg v1 features are deprecated. "mm: swap: mTHP swap allocator base on swap cluster order" from Chris Li. Greatly improves the success rate of the mTHP swap allocation. "mm: introduce numa_memblks" from Mike Rapoport. Moves various disparate per-arch implementations of numa_memblk code into generic code. "mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly improves the performance of munmap() of swap-filled ptes. "support large folio swap-out and swap-in for shmem" from Baolin Wang. With this series we no longer split shmem large folios into simgle-page folios when swapping out shmem. "mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice performance improvements and code reductions for gigantic folios. "support shmem mTHP collapse" from Baolin Wang. Adds support for khugepaged's collapsing of shmem mTHP folios. "mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect() performance regression due to the addition of mseal(). "Increase the number of bits available in page_type" from Matthew Wilcox. Increases the number of bits available in page_type! "Simplify the page flags a little" from Matthew Wilcox. Many legacy page flags are now folio flags, so the page-based flags and their accessors/mutators can be removed. "mm: store zero pages to be swapped out in a bitmap" from Usama Arif. An optimization which permits us to avoid writing/reading zero-filled zswap pages to backing store. "Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race window which occurs when a MAP_FIXED operqtion is occurring during an unrelated vma tree walk. "mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of the vma_merge() functionality, making ot cleaner, more testable and better tested. "misc fixups for DAMON {self,kunit} tests" from SeongJae Park. Minor fixups of DAMON selftests and kunit tests. "mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang. Code cleanups and folio conversions. "Shmem mTHP controls and stats improvements" from Ryan Roberts. Cleanups for shmem controls and stats. "mm: count the number of anonymous THPs per size" from Barry Song. Expose additional anon THP stats to userspace for improved tuning. "mm: finish isolate/putback_lru_page()" from Kefeng Wang: more folio conversions and removal of now-unused page-based APIs. "replace per-quota region priorities histogram buffer with per-context one" from SeongJae Park. DAMON histogram rationalization. "Docs/damon: update GitHub repo URLs and maintainer-profile" from SeongJae Park. DAMON documentation updates. "mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and improve related doc and warn" from Jason Wang: fixes usage of page allocator __GFP_NOFAIL and GFP_ATOMIC flags. "mm: split underused THPs" from Yu Zhao. Improve THP=always policy - this was overprovisioning THPs in sparsely accessed memory areas. "zram: introduce custom comp backends API" frm Sergey Senozhatsky. Add support for zram run-time compression algorithm tuning. "mm: Care about shadow stack guard gap when getting an unmapped area" from Mark Brown. Fix up the various arch_get_unmapped_area() implementations to better respect guard areas. "Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability of mem_cgroup_iter() and various code cleanups. "mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge pfnmap support. "resource: Fix region_intersects() vs add_memory_driver_managed()" from Huang Ying. Fix a bug in region_intersects() for systems with CXL memory. "mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches a couple more code paths to correctly recover from the encountering of poisoned memry. "mm: enable large folios swap-in support" from Barry Song. Support the swapin of mTHP memory into appropriately-sized folios, rather than into single-page folios. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZu1BBwAKCRDdBJ7gKXxA jlWNAQDYlqQLun7bgsAN4sSvi27VUuWv1q70jlMXTfmjJAvQqwD/fBFVR6IOOiw7 AkDbKWP2k0hWPiNJBGwoqxdHHx09Xgo= =s0T+ -----END PGP SIGNATURE----- Merge tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: "Along with the usual shower of singleton patches, notable patch series in this pull request are: - "Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds consistency to the APIs and behaviour of these two core allocation functions. This also simplifies/enables Rustification. - "Some cleanups for shmem" from Baolin Wang. No functional changes - mode code reuse, better function naming, logic simplifications. - "mm: some small page fault cleanups" from Josef Bacik. No functional changes - code cleanups only. - "Various memory tiering fixes" from Zi Yan. A small fix and a little cleanup. - "mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and simplifications and .text shrinkage. - "Kernel stack usage histogram" from Pasha Tatashin and Shakeel Butt. This is a feature, it adds new feilds to /proc/vmstat such as $ grep kstack /proc/vmstat kstack_1k 3 kstack_2k 188 kstack_4k 11391 kstack_8k 243 kstack_16k 0 which tells us that 11391 processes used 4k of stack while none at all used 16k. Useful for some system tuning things, but partivularly useful for "the dynamic kernel stack project". - "kmemleak: support for percpu memory leak detect" from Pavel Tikhomirov. Teaches kmemleak to detect leaksage of percpu memory. - "mm: memcg: page counters optimizations" from Roman Gushchin. "3 independent small optimizations of page counters". - "mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from David Hildenbrand. Improves PTE/PMD splitlock detection, makes powerpc/8xx work correctly by design rather than by accident. - "mm: remove arch_make_page_accessible()" from David Hildenbrand. Some folio conversions which make arch_make_page_accessible() unneeded. - "mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David Finkel. Cleans up and fixes our handling of the resetting of the cgroup/process peak-memory-use detector. - "Make core VMA operations internal and testable" from Lorenzo Stoakes. Rationalizaion and encapsulation of the VMA manipulation APIs. With a view to better enable testing of the VMA functions, even from a userspace-only harness. - "mm: zswap: fixes for global shrinker" from Takero Funaki. Fix issues in the zswap global shrinker, resulting in improved performance. - "mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill in some missing info in /proc/zoneinfo. - "mm: replace follow_page() by folio_walk" from David Hildenbrand. Code cleanups and rationalizations (conversion to folio_walk()) resulting in the removal of follow_page(). - "improving dynamic zswap shrinker protection scheme" from Nhat Pham. Some tuning to improve zswap's dynamic shrinker. Significant reductions in swapin and improvements in performance are shown. - "mm: Fix several issues with unaccepted memory" from Kirill Shutemov. Improvements to the new unaccepted memory feature, - "mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on DAX PUDs. This was missing, although nobody seems to have notied yet. - "Introduce a store type enum for the Maple tree" from Sidhartha Kumar. Cleanups and modest performance improvements for the maple tree library code. - "memcg: further decouple v1 code from v2" from Shakeel Butt. Move more cgroup v1 remnants away from the v2 memcg code. - "memcg: initiate deprecation of v1 features" from Shakeel Butt. Adds various warnings telling users that memcg v1 features are deprecated. - "mm: swap: mTHP swap allocator base on swap cluster order" from Chris Li. Greatly improves the success rate of the mTHP swap allocation. - "mm: introduce numa_memblks" from Mike Rapoport. Moves various disparate per-arch implementations of numa_memblk code into generic code. - "mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly improves the performance of munmap() of swap-filled ptes. - "support large folio swap-out and swap-in for shmem" from Baolin Wang. With this series we no longer split shmem large folios into simgle-page folios when swapping out shmem. - "mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice performance improvements and code reductions for gigantic folios. - "support shmem mTHP collapse" from Baolin Wang. Adds support for khugepaged's collapsing of shmem mTHP folios. - "mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect() performance regression due to the addition of mseal(). - "Increase the number of bits available in page_type" from Matthew Wilcox. Increases the number of bits available in page_type! - "Simplify the page flags a little" from Matthew Wilcox. Many legacy page flags are now folio flags, so the page-based flags and their accessors/mutators can be removed. - "mm: store zero pages to be swapped out in a bitmap" from Usama Arif. An optimization which permits us to avoid writing/reading zero-filled zswap pages to backing store. - "Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race window which occurs when a MAP_FIXED operqtion is occurring during an unrelated vma tree walk. - "mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of the vma_merge() functionality, making ot cleaner, more testable and better tested. - "misc fixups for DAMON {self,kunit} tests" from SeongJae Park. Minor fixups of DAMON selftests and kunit tests. - "mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang. Code cleanups and folio conversions. - "Shmem mTHP controls and stats improvements" from Ryan Roberts. Cleanups for shmem controls and stats. - "mm: count the number of anonymous THPs per size" from Barry Song. Expose additional anon THP stats to userspace for improved tuning. - "mm: finish isolate/putback_lru_page()" from Kefeng Wang: more folio conversions and removal of now-unused page-based APIs. - "replace per-quota region priorities histogram buffer with per-context one" from SeongJae Park. DAMON histogram rationalization. - "Docs/damon: update GitHub repo URLs and maintainer-profile" from SeongJae Park. DAMON documentation updates. - "mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and improve related doc and warn" from Jason Wang: fixes usage of page allocator __GFP_NOFAIL and GFP_ATOMIC flags. - "mm: split underused THPs" from Yu Zhao. Improve THP=always policy. This was overprovisioning THPs in sparsely accessed memory areas. - "zram: introduce custom comp backends API" frm Sergey Senozhatsky. Add support for zram run-time compression algorithm tuning. - "mm: Care about shadow stack guard gap when getting an unmapped area" from Mark Brown. Fix up the various arch_get_unmapped_area() implementations to better respect guard areas. - "Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability of mem_cgroup_iter() and various code cleanups. - "mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge pfnmap support. - "resource: Fix region_intersects() vs add_memory_driver_managed()" from Huang Ying. Fix a bug in region_intersects() for systems with CXL memory. - "mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches a couple more code paths to correctly recover from the encountering of poisoned memry. - "mm: enable large folios swap-in support" from Barry Song. Support the swapin of mTHP memory into appropriately-sized folios, rather than into single-page folios" * tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (416 commits) zram: free secondary algorithms names uprobes: turn xol_area->pages[2] into xol_area->page uprobes: introduce the global struct vm_special_mapping xol_mapping Revert "uprobes: use vm_special_mapping close() functionality" mm: support large folios swap-in for sync io devices mm: add nr argument in mem_cgroup_swapin_uncharge_swap() helper to support large folios mm: fix swap_read_folio_zeromap() for large folios with partial zeromap mm/debug_vm_pgtable: Use pxdp_get() for accessing page table entries set_memory: add __must_check to generic stubs mm/vma: return the exact errno in vms_gather_munmap_vmas() memcg: cleanup with !CONFIG_MEMCG_V1 mm/show_mem.c: report alloc tags in human readable units mm: support poison recovery from copy_present_page() mm: support poison recovery from do_cow_fault() resource, kunit: add test case for region_intersects() resource: make alloc_free_mem_region() works for iomem_resource mm: z3fold: deprecate CONFIG_Z3FOLD vfio/pci: implement huge_fault support mm/arm64: support large pfn mappings mm/x86: support large pfn mappings ... |
||
Mayuresh Chitale
|
f0c9363db2
|
perf/riscv-sbi: Add platform specific firmware event handling
The SBI v2.0 specification pointed to by the link below reserves the event code 0xffff for platform specific firmware events. Update the driver to be able to parse and program such events. The platform specific firmware events must now be specified in the perf command as below: perf stat -e rCxxx ... where bits[63:62] = 0x3 of the event config indicate a platform specific firmware event and xxx indicate the actual event code which is passed as the event data. Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com> Link: https://github.com/riscv-non-isa/riscv-sbi-doc/releases/download/v2.0/riscv-sbi.pdf Link: https://lore.kernel.org/r/20240812051109.6496-1-mchitale@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Palmer Dabbelt
|
ad380f6a0a
|
RISC-V: Don't have MAX_PHYSMEM_BITS exceed phys_addr_t
I recently ended up with a warning on some compilers along the lines of CC kernel/resource.o In file included from include/linux/ioport.h:16, from kernel/resource.c:15: kernel/resource.c: In function 'gfr_start': include/linux/minmax.h:49:37: error: conversion from 'long long unsigned int' to 'resource_size_t' {aka 'unsigned int'} changes value from '17179869183' to '4294967295' [-Werror=overflow] 49 | ({ type ux = (x); type uy = (y); __cmp(op, ux, uy); }) | ^ include/linux/minmax.h:52:9: note: in expansion of macro '__cmp_once_unique' 52 | __cmp_once_unique(op, type, x, y, __UNIQUE_ID(x_), __UNIQUE_ID(y_)) | ^~~~~~~~~~~~~~~~~ include/linux/minmax.h:161:27: note: in expansion of macro '__cmp_once' 161 | #define min_t(type, x, y) __cmp_once(min, type, x, y) | ^~~~~~~~~~ kernel/resource.c:1829:23: note: in expansion of macro 'min_t' 1829 | end = min_t(resource_size_t, base->end, | ^~~~~ kernel/resource.c: In function 'gfr_continue': include/linux/minmax.h:49:37: error: conversion from 'long long unsigned int' to 'resource_size_t' {aka 'unsigned int'} changes value from '17179869183' to '4294967295' [-Werror=overflow] 49 | ({ type ux = (x); type uy = (y); __cmp(op, ux, uy); }) | ^ include/linux/minmax.h:52:9: note: in expansion of macro '__cmp_once_unique' 52 | __cmp_once_unique(op, type, x, y, __UNIQUE_ID(x_), __UNIQUE_ID(y_)) | ^~~~~~~~~~~~~~~~~ include/linux/minmax.h:161:27: note: in expansion of macro '__cmp_once' 161 | #define min_t(type, x, y) __cmp_once(min, type, x, y) | ^~~~~~~~~~ kernel/resource.c:1847:24: note: in expansion of macro 'min_t' 1847 | addr <= min_t(resource_size_t, base->end, | ^~~~~ cc1: all warnings being treated as errors which looks like a real problem: our phys_addr_t is only 32 bits now, so having 34-bit masks is just going to result in overflows. Reviewed-by: Charlie Jenkins <charlie@rivosinc.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20240731162159.9235-2-palmer@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Haibo Xu
|
732b177663
|
ACPI: NUMA: initialize all values of acpi_early_node_map to NUMA_NO_NODE
Currently, only acpi_early_node_map[0] was initialized to NUMA_NO_NODE. To ensure all the values were properly initialized, switch to initialize all of them to NUMA_NO_NODE. Suggested-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Haibo Xu <haibo1.xu@intel.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> (arm64 platform) Reviewed-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Link: https://lore.kernel.org/r/20240729035958.1957185-1-haibo1.xu@intel.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Linus Torvalds
|
baeb9a7d8b |
Enable PREEMPT_RT on supported architectures:
After twenty years of development we finally reached the point to enable PREEMPT_RT support in the mainline kernel. All prerequisites are merged, so enable it on the supported architectures ARM64, RISCV and X86(32/64-bit). -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmbpR28THHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoZXyD/972yR+oUuGNu8mb02H4kEcOCrsMOuM gMAneOjJY7+m4P2ois1gPoK6aPCT6AUlQj6DxOwjOhlmpWV6TaznymiVkKVZMhiT hRm5mWGxjXFtak/cnNixzAy/FsVGzBkQ/urPRfjb8MOGN9+9AOwmenXWsKUziaq9 b/XrovT1nkr5DA7fTbKa8Mw4+9PpZC5HacAfZwtbtPhKX7CbbCQugjMcrzN3h17/ g2EOPBLORfaEdWtnce6ZW+LZJ7y9dLdodoE6S2vZg/PfobsHqKhw7Kkw/Wr/iB1/ dHWps2b55X+3Oo410vm7Q4sEHY2Z4n0a51mHR7N2pqsEZLke+70SQuQ9MU7JRAKv ospsscPKCnbG4T4XYk8k3g56bbuu1xHnfGYFA6vhE48IrHMB/601lkH5Z5Xl2a3W x7wrXRuAwkPuLxiTRSp3MH3asq8cwBZKXMVelC7ctr6QqQbF3DSJFbyWezIvP+kz IyI7L3CcRYtExW8wY5ocXvMmwCDzz7XaQL9cqegLtkyxPd3CifzcDc9T8vWd6Zec PLMHBOFEaBWy+AsiOevvpSmy1kE8Ncm29xqafP06MyECAPQRzaexwVVBA5zalXIG zHyd0KdrVE1vix82JKGPn7ngDxdZPR6AEXc1NE1135fBCzSYM15T3JYrGXTzhFR1 c+Qo+hqOoKztbQ== =+vJ6 -----END PGP SIGNATURE----- Merge tag 'sched-rt-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RT enablement from Thomas Gleixner: "Enable PREEMPT_RT on supported architectures: After twenty years of development we finally reached the point to enable PREEMPT_RT support in the mainline kernel. All prerequisites are merged, so enable it on the supported architectures ARM64, RISCV and X86(32/64-bit)" * tag 'sched-rt-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: riscv: Allow to enable PREEMPT_RT. arm64: Allow to enable PREEMPT_RT. x86: Allow to enable PREEMPT_RT. |
||
Palmer Dabbelt
|
5835437609
|
Merge patch series "riscv: Improve KASAN coverage to fix unit tests"
Samuel Holland <samuel.holland@sifive.com> says: This series fixes two areas where uninstrumented assembly routines caused gaps in KASAN coverage on RISC-V, which were caught by KUnit tests. The KASAN KUnit test suite passes after applying this series. This series fixes the following test failures: # kasan_strings: EXPECTATION FAILED at mm/kasan/kasan_test.c:1520 KASAN failure expected in "kasan_int_result = strcmp(ptr, "2")", but none occurred # kasan_strings: EXPECTATION FAILED at mm/kasan/kasan_test.c:1524 KASAN failure expected in "kasan_int_result = strlen(ptr)", but none occurred not ok 60 kasan_strings # kasan_bitops_generic: EXPECTATION FAILED at mm/kasan/kasan_test.c:1531 KASAN failure expected in "set_bit(nr, addr)", but none occurred # kasan_bitops_generic: EXPECTATION FAILED at mm/kasan/kasan_test.c:1533 KASAN failure expected in "clear_bit(nr, addr)", but none occurred # kasan_bitops_generic: EXPECTATION FAILED at mm/kasan/kasan_test.c:1535 KASAN failure expected in "clear_bit_unlock(nr, addr)", but none occurred # kasan_bitops_generic: EXPECTATION FAILED at mm/kasan/kasan_test.c:1536 KASAN failure expected in "__clear_bit_unlock(nr, addr)", but none occurred # kasan_bitops_generic: EXPECTATION FAILED at mm/kasan/kasan_test.c:1537 KASAN failure expected in "change_bit(nr, addr)", but none occurred # kasan_bitops_generic: EXPECTATION FAILED at mm/kasan/kasan_test.c:1543 KASAN failure expected in "test_and_set_bit(nr, addr)", but none occurred # kasan_bitops_generic: EXPECTATION FAILED at mm/kasan/kasan_test.c:1545 KASAN failure expected in "test_and_set_bit_lock(nr, addr)", but none occurred # kasan_bitops_generic: EXPECTATION FAILED at mm/kasan/kasan_test.c:1546 KASAN failure expected in "test_and_clear_bit(nr, addr)", but none occurred # kasan_bitops_generic: EXPECTATION FAILED at mm/kasan/kasan_test.c:1548 KASAN failure expected in "test_and_change_bit(nr, addr)", but none occurred not ok 61 kasan_bitops_generic Samuel Holland (2): riscv: Omit optimized string routines when using KASAN riscv: Enable bitops instrumentation arch/riscv/include/asm/bitops.h | 43 ++++++++++++++++++--------------- arch/riscv/include/asm/string.h | 2 ++ arch/riscv/kernel/riscv_ksyms.c | 3 --- arch/riscv/lib/Makefile | 2 ++ arch/riscv/lib/strcmp.S | 1 + arch/riscv/lib/strlen.S | 1 + arch/riscv/lib/strncmp.S | 1 + arch/riscv/purgatory/Makefile | 2 ++ 8 files changed, 32 insertions(+), 23 deletions(-) * b4-shazam-merge: riscv: Enable bitops instrumentation riscv: Omit optimized string routines when using KASAN Link: https://lore.kernel.org/r/20240801033725.28816-1-samuel.holland@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Samuel Holland
|
77514915b7
|
riscv: Enable bitops instrumentation
Instead of implementing the bitops functions directly in assembly, provide the arch_-prefixed versions and use the wrappers from asm-generic to add instrumentation. This improves KASAN coverage and fixes the kasan_bitops_generic() unit test. Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20240801033725.28816-3-samuel.holland@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Samuel Holland
|
58ff537109
|
riscv: Omit optimized string routines when using KASAN
The optimized string routines are implemented in assembly, so they are not instrumented for use with KASAN. Fall back to the C version of the routines in order to improve KASAN coverage. This fixes the kasan_strings() unit test. Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20240801033725.28816-2-samuel.holland@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Hanjun Guo
|
21d98d658f
|
ACPI: RISCV: Make acpi_numa_get_nid() to be static
acpi_numa_get_nid() is only called in acpi_numa.c for riscv, no need to add it in head file, so make it static and remove related functions in the asm/acpi.h. Spotted by doing some cleanup for arm64 ACPI. Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-by: Haibo Xu <haibo1.xu@intel.com> Link: https://lore.kernel.org/r/20240811031804.3347298-1-guohanjun@huawei.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Paolo Bonzini
|
c09dd2bb57 |
Merge branch 'kvm-redo-enable-virt' into HEAD
Register KVM's cpuhp and syscore callbacks when enabling virtualization in hardware, as the sole purpose of said callbacks is to disable and re-enable virtualization as needed. The primary motivation for this series is to simplify dealing with enabling virtualization for Intel's TDX, which needs to enable virtualization when kvm-intel.ko is loaded, i.e. long before the first VM is created. That said, this is a nice cleanup on its own. By registering the callbacks on-demand, the callbacks themselves don't need to check kvm_usage_count, because their very existence implies a non-zero count. Patch 1 (re)adds a dedicated lock for kvm_usage_count. This avoids a lock ordering issue between cpus_read_lock() and kvm_lock. The lock ordering issue still exist in very rare cases, and will be fixed for good by switching vm_list to an (S)RCU-protected list. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
Yunhui Cui
|
048e2906d4
|
riscv: Randomize lower bits of stack address
Implement arch_align_stack() to randomize the lower bits of the stack address. Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com> Link: https://lore.kernel.org/r/20240625030502.68988-1-cuiyunhui@bytedance.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Charlie Jenkins
|
594ffcf4ef
|
riscv: Make riscv_isa_vendor_ext_andes array static
Since this array is only used in this file, it should be static. Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202407241530.ej5SVgX1-lkp@intel.com/ Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20240807-make_andes_static-v1-1-b64bf4c3d941@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Jinjie Ruan
|
3cc754c237
|
riscv: Use LIST_HEAD() to simplify code
list_head can be initialized automatically with LIST_HEAD() instead of calling INIT_LIST_HEAD(). Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Tested-by: Charlie Jenkins <charlie@rivosinc.com> Reviewed-by: Charlie Jenkins <charlie@rivosinc.com> Link: https://lore.kernel.org/r/20240904013344.2026738-1-ruanjinjie@huawei.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Geert Uytterhoeven
|
e36ddf3226
|
riscv: defconfig: Disable RZ/Five peripheral support
There is not much point in keeping support for RZ/Five peripherals enabled, as the RZ/Five platform option (ARCH_R9A07G043) is gated behind NONPORTABLE. Hence drop all config options that enable built-in or modular support for peripherals found on RZ/Five SoCs. Disable USB_XHCI_RCAR explicitly, as its value defaults to the value of ARCH_RENESAS, which is still enabled. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/89ad70c7d6e8078208fecfd41dc03f6028531729.1722353710.git.geert+renesas@glider.be Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Jinjie Ruan
|
983f121499
|
RISC-V: Implement kgdb_roundup_cpus() to enable future NMI Roundup
Until now, the generic weak kgdb_roundup_cpus() has been used for kgdb on RISCV. A custom one allows to debug CPUs that are stuck with interrupts disabled with NMI support in the future. And using an IPI is better than the generic one since it avoids the potential situation described in the generic kgdb_call_nmi_hook(). As Andrew pointed out, once there is NMI support, we can easily extend this and the CPU backtrace support to use NMIs. After this patch, the kgdb test show that: # echo g > /proc/sysrq-trigger [2]kdb> btc btc: cpu status: Currently on cpu 2 Available cpus: 0-1(-), 2, 3(-) Stack traceback for pid 0 0xffffffff81c13a40 0 0 1 0 - 0xffffffff81c14510 swapper/0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.10.0-g3120273055b6-dirty #51 Hardware name: riscv-virtio,qemu (DT) Call Trace: [<ffffffff80006c48>] dump_backtrace+0x28/0x30 [<ffffffff80fceb38>] show_stack+0x38/0x44 [<ffffffff80fe6a04>] dump_stack_lvl+0x58/0x7a [<ffffffff80fe6a3e>] dump_stack+0x18/0x20 [<ffffffff801143fa>] kgdb_cpu_enter+0x682/0x6b2 [<ffffffff801144ca>] kgdb_nmicallback+0xa0/0xac [<ffffffff8000a392>] handle_IPI+0x9c/0x120 [<ffffffff800a2baa>] handle_percpu_devid_irq+0xa4/0x1e4 [<ffffffff8009cca8>] generic_handle_domain_irq+0x28/0x36 [<ffffffff800a9e5c>] ipi_mux_process+0xe8/0x110 [<ffffffff806e1e30>] imsic_handle_irq+0xf8/0x13a [<ffffffff8009cca8>] generic_handle_domain_irq+0x28/0x36 [<ffffffff806dff12>] riscv_intc_aia_irq+0x2e/0x40 [<ffffffff80fe6ab0>] handle_riscv_irq+0x54/0x86 [<ffffffff80ff2e4a>] call_on_irq_stack+0x32/0x40 Rebased on Ryo Takakura's "RISC-V: Enable IPI CPU Backtrace" patch. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Link: https://lore.kernel.org/r/20240727063438.886155-1-ruanjinjie@huawei.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Sebastian Andrzej Siewior
|
2638e4e6b1 |
riscv: Allow to enable PREEMPT_RT.
It is really time. riscv has all the required architecture related changes, that have been identified over time, in order to enable PREEMPT_RT. With the recent printk changes, the last known road block has been addressed. Allow to enable PREEMPT_RT on riscv. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Nam Cao <namcao@linutronix.de> # Visionfive 2 Link: https://lore.kernel.org/all/20240906111841.562402-4-bigeasy@linutronix.de |
||
Linus Torvalds
|
38ea77ab07 |
soc: defconfig updates for 6.12
The updates to the defconfig files are fairly small, enabling drivers for eight of the arm and riscv based platforms. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmboHkgACgkQYKtH/8kJ Uiedsw//ee8uHQj003iuqawzMn0oBKcjBO0MpDSanv3qL0Lm5yLZ4s1Nw2jNlsEd uiQytgkduiYwQ9hM4u19cAPi3xab1ruoj9wAp3kcx1dmEbjNP5QTwPkNiNwZIcMu f6Mz7SOTWwp1YWxAXqVU6usR6H3N7VR3P5XdNP/TBSS7MNW6bRPqiO6kAc4AT1H2 RNik3m1kCQIPpX1pdYK2bnCFRIl+TIr2jrHV9B9zYKc1f/il4MuIjVP2U1WDQ10U r5xKCb8MrIQtju+aCfmYwYqUYQ95ptjSas1MwV0xURzxDL/x9B8wL+NDeNsomwJq vlk6vr3HtIsJduXylIxqQ5KY6q/uxJ9whmtU943mPdEZgp3nZeXbK+EHXT5KZbB3 GAGaf//Pt/0+3jQA/qThD9+GF2OMxKUiyi4ZIezI4pj9VoB6uhittmHQlmPc0KvP 8UpkaHiyztgO9R08XGvmQ03A6B0UdJMPFAy1onYZkyL+MhRF2a04D16nkLBGa2jU DvNo9ojqUfSEKiLpQtCwVFc0lQkAdnoVsywcrAp4+KXqzNC51I1Rj59SvaebvCcg eTat1cSVQRvHnSbG/TOiWBtVZ9GqisLf9vAIwYV05b7jT5fWff69olXDXTcQma1P 8aYIGtUIeeDmr+qE6U31aToj/BXpOuI6MvY0tkBfdyqRYuq6lN8= =A/M4 -----END PGP SIGNATURE----- Merge tag 'soc-defconfig-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC defconfig updates from Arnd Bergmann: "The updates to the defconfig files are fairly small, enabling drivers for eight of the arm and riscv based platforms" * tag 'soc-defconfig-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: arm64: defconfig: enable mt8365 sound riscv: defconfig: Enable pinctrl support for CV18XX Series SoC arm64: defconfig: Enable ADP5585 GPIO and PWM drivers arm64: defconfig: Enable Tegra194 PCIe Endpoint arm64: defconfig: Enable E5010 JPEG Encoder riscv: defconfig: sophgo: enable clks for sg2042 arm64: defconfig: build CONFIG_REGULATOR_QCOM_REFGEN as module ARM: configs: at91: enable config flags for sam9x7 SoC family arm64: defconfig: Enable R-Car Ethernet-TSN support ARM: shmobile: defconfig: Enable slab hardening and kmalloc buckets arm64: defconfig: Enable AK4619 codec support |
||
Linus Torvalds
|
7b17f5ebd5 |
soc: devicetree updates for 6.12
New SoC support for Broadcom bcm2712 (Raspberry Pi 5) and Renesas R9A09G057 (RZ/V2H(P)) and Qualcomm Snapdragon 414 (MSM8929), all three of these are variants of already supported chips, in particular the last one is almost identical to MSM8939. Lots of updates to Mediatek, ASpeed, Rockchips, Amlogic, Qualcomm, STM32, NXP i.MX, Sophgo, TI K3, Renesas, Microchip at91, NVIDIA Tegra, and T-HEAD. The added Qualcomm platform support once again dominates the changes, with seven phones and three laptops getting added in addition to many new features on existing machines. The Snapdragon X1E support specifically keeps improving. The other new machines are: - eight new machines using various 64-bit Rockchips SoCs, both on the consumer/gaming side and developer boards - three industrial boards with 64-bit i.MX, which is a very low number for them. - four more servers using a 32-bit Speed BMC - three boards using STM32MP1 SoCs - one new machine each using allwinner, amlogic, broadcom and renesas chips. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmboLzkACgkQYKtH/8kJ Uid+1g/+J8rQQxIjLxxbx+TkhECt5X1u5mQZTZBIeCZmJQz2rNvmo3bm89ZAR32Z FnjSN0fXw7eZqnxImwNAIU7g7RBhj5zs1gKXsB2lb0vv7722KyQ1xz2Fh1NQWQ09 OMCVjI1+19zBZYCB0C1Y2WTsFRUl5ISE3H3Wx8MJT1GWDDao/D2ULkEda0uTSu3i CBYBNwCtBJU7TsGe5a04P7rGKvOlDdVj+2VvMKaX6bFa+MDxoMtlABWLZRJCwOy8 04+Oz9AO0r6HpsrAKOgxxNod7Jkw13UUG22PoTS4+B2Bc7/9oXTcJM8e+44BEe4J nyJButDCAf7IsqOuB0S/4J0YxtcDGnzJXNQrUg11owwVXC+uzVvkUExOneRBXqUc 179OlY5tCXaaRtmoeUTOH9C4rk5x6o5jHCLs2DJNf9TsOwD2VjzUvUWp5WBhDDG4 qxIUvflGm2pXhF9OeK+7fPllTc1pUmA2/LZ9LXc/13Zn3eZKGn/Kql1SNFC0CIi0 8kQnIcV0dOh7E+zPcYENR+NGuTUU2GH3iQM9frHIaPc+KcaXPRVJDqREe/RNYRqN qDY7yIGkeqmH9mKhdV+WQGBjJ6z3ElOMYVST6Kq3JBDiF12UaCPEhG2t8inmvEsA t7nL84iWpeC1Gh+AT8UJBlRSFzQoafIrVav26pqwCvOrK7UHMZk= =r07W -----END PGP SIGNATURE----- Merge tag 'soc-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC devicetree updates from Arnd Bergmann: "New SoC support for Broadcom bcm2712 (Raspberry Pi 5) and Renesas R9A09G057 (RZ/V2H(P)) and Qualcomm Snapdragon 414 (MSM8929), all three of these are variants of already supported chips, in particular the last one is almost identical to MSM8939. Lots of updates to Mediatek, ASpeed, Rockchips, Amlogic, Qualcomm, STM32, NXP i.MX, Sophgo, TI K3, Renesas, Microchip at91, NVIDIA Tegra, and T-HEAD. The added Qualcomm platform support once again dominates the changes, with seven phones and three laptops getting added in addition to many new features on existing machines. The Snapdragon X1E support specifically keeps improving. The other new machines are: - eight new machines using various 64-bit Rockchips SoCs, both on the consumer/gaming side and developer boards - three industrial boards with 64-bit i.MX, which is a very low number for them. - four more servers using a 32-bit Speed BMC - three boards using STM32MP1 SoCs - one new machine each using allwinner, amlogic, broadcom and renesas chips" * tag 'soc-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (672 commits) arm64: dts: allwinner: h5: NanoPi NEO Plus2: Use regulators for pio arm64: dts: mediatek: add audio support for mt8365-evk arm64: dts: mediatek: add afe support for mt8365 SoC arm64: dts: mediatek: mt8186-corsola: Disable DPI display interface arm64: dts: mediatek: mt8186: Add svs node arm64: dts: mediatek: mt8186: Add power domain for DPI arm64: dts: mediatek: mt8195: Correct clock order for dp_intf* arm64: dts: mt8183: add dpi node to mt8183 arm64: dts: allwinner: h5: NanoPi Neo Plus2: Fix regulators arm64: dts: rockchip: add CAN0 and CAN1 interfaces to mecsbc board arm64: dts: rockchip: add CAN-FD controller nodes to rk3568 arm64: dts: nuvoton: ma35d1: Add uart pinctrl settings arm64: dts: nuvoton: ma35d1: Add pinctrl and gpio nodes arm64: dts: nuvoton: Add syscon to the system-management node ARM: dts: Fix undocumented LM75 compatible nodes arm64: dts: toshiba: Fix pl011 and pl022 clocks ARM: dts: stm32: Use SAI to generate bit and frame clock on STM32MP15xx DHCOM PDK2 ARM: dts: stm32: Switch bitclock/frame-master to flag on STM32MP15xx DHCOM PDK2 ARM: dts: stm32: Sort properties in audio endpoints on STM32MP15xx DHCOM PDK2 ARM: dts: stm32: Add MECIO1 and MECT1S board variants ... |
||
Linus Torvalds
|
11b3125073 |
ACPI updates for 6.12-rc1
- Check return value in acpi_db_convert_to_package() (Pei Xiao). - Detect FACS and allow setting the waking vector on reduced-hardware ACPI platforms (Jiaqing Zhao). - Allow ACPICA to represent semaphores as integers (Adrien Destugues). - Complete CXL 3.0 CXIMS structures support in ACPICA (Zhang Rui). - Make ACPICA support SPCR version 4 and add RISC-V SBI Subtype to DBG2 (Sia Jee Heng). - Implement the Dword_PCC Resource Descriptor Macro in ACPICA (Jose Marinho). - Correct the typo in struct acpi_mpam_msc_node member (Punit Agrawal). - Implement ACPI_WARNING_ONCE() and ACPI_ERROR_ONCE() and use them to prevent a Stall() violation warning from being printed every time this takes place (Vasily Khoruzhick). - Allow PCC Data Type in MCTP resource (Adam Young). - Fix memory leaks on acpi_ps_get_next_namepath() and acpi_ps_get_next_field() failures (Armin Wolf). - Add support for supressing leading zeros in hex strings when converting them to integers and update integer-to-hex-string conversions in ACPICA (Armin Wolf). - Add support for Windows 11 22H2 _OSI string (Armin Wolf). - Avoid warning for Dump Functions in ACPICA (Adam Lackorzynski). - Add extended linear address mode to HMAT MSCIS in ACPICA (Dave Jiang). - Handle empty connection_node in iasl (Aleksandrs Vinarskis). - Allow for more flexibility in _DSM args (Saket Dumbre). - Setup for ACPICA release 20240827 (Saket Dumbre). - Add ACPI device enumeration support for interrupt controller probing including taking dependencies into account (Sunil V L). - Implement ACPI-based interrupt controller probing on RISC-V (Sunil V L). - Add ACPI support for AIA in riscv-intc and add ACPI support to riscv-imsic, riscv-aplic, and sifive-plic (Sunil V L). - Do not release locks during operation region accesses in the ACPI EC driver (Rafael Wysocki). - Fix up the _STR handling in the ACPI device object sysfs interface, make it represent the device object attributes as an attribute group and make it rely on driver core functionality for sysfs attrubute management (Thomas Weißschuh). - Extend error messages printed to the kernel log when acpi_evaluate_dsm() fails to include revision and function number (David Wang). - Add a new AMDI0015 platform device ID to the ACPi APD driver for AMD SoCs (Shyam Sundar S K). - Use the driver core for the async probing management in the ACPI battery driver (Thomas Weißschuh). - Remove redundant initalizations of a local variable to NULL from the ACPI battery driver (Ilpo Järvinen). - Remove unneeded check in tps68470_pmic_opregion_probe() (Aleksandr Mishin). - Add support for setting the EPP register through the ACPI CPPC sysfs interface if it is in FFH (Mario Limonciello). - Fix MASK_VAL() usage in the ACPI CPPC library (Clément Léger). - Reduce the log level of a per-CPU message about idle states in the ACPI processor driver (Li RongQing). - Fix crash in exit_round_robin() in the ACPI processor aggregator device (PAD) driver (Seiji Nishikawa). - Add force_vendor quirk for Panasonic Toughbook CF-18 in the ACPI backlight driver (Hans de Goede). - Make the DMI checks related to backlight handling on Lenovo Yoga Tab 3 X90F less strict (Hans de Goede). - Enforce native backlight handling on Apple MacbookPro9,2 (Esther Shimanovich). - Add IRQ override quirks for Asus Vivobook Go E1404GAB and MECHREV GM7XG0M, and refine the TongFang GMxXGxx quirk (Li Chen, Tamim Khan, Werner Sembach). - Quirk ASUS ROG M16 to default to S3 sleep (Luke D. Jones). - Define and use symbols for device and class name lengths in the ACPI bus type code and make the code use strscpy() instead of strcpy() in several places (Muhammad Qasim Abdul Majeed). -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmbjJ9kSHHJqd0Byand5 c29ja2kubmV0AAoJEILEb/54YlRxhfMP/3i4Nrkmf2HpiSJ/zFMSISNbAEmLSqQQ gSo0Mmj1OHN9W9rBiIVDgJjeakyLg2IHB1sFZ9ABtU1JvO9mMchU7OlDKIt8Q8sf VJa+q0tcA4kny5BZa47fPjZaaM6f9boVTm5WRn9T7KSLA+EGBAxE+UXQ2ibxiPCc ZWX8obeYe78Zv2i5U8LiO4mQlB2viGEgO/5vKywmNKYVpurOMAv4zGjvDfRxK3ZQ GXIZLUCh0inu8VomrbI5B1bpqNTxUrLoEAExKpyAyIiRYay+nyv8Vm2sSw9roe3a C9pux4pojT0zfkmCVJmXET0982GcMSDaB0Rb1ypwbC2EdTtEoauC/HTyTixNBxBa MnHntDe/l6Z9gLhbj8dcfB0ZVUkahqFzndWA9EBwroor2S7woZNtA3jL9VNHbM1J kKNPQ2YCQi1ObQcftZDC9UYYx62KVvWNZCTS1+ZjnpKNH8hcEEBwMlnmE1VTYeHf TN0vbB6QJSDu26qOyiWMCgLAR45TW/YzA3CrJi7/zGMSUyEQvHQAe5wh5H3ygbAR GbDau0AVSvCO7lTRpqkzS6aeTLIbp1oqGwnnSXQDy30biI2FeQyg76Nq8Rgj5Lun 8+GvmkuVSjbjTXYbLqjt/gW97O/HUdygfL7hhjS10TB+3C34mQm/pwFxNYxJdFyO mhMeKq4DdOJ+ =XHaD -----END PGP SIGNATURE----- Merge tag 'acpi-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These update the ACPICA code in the kernel to upstream version 20240827, add support for ACPI-based enumeration of interrupt controllers on RISC-V along with some related irqchip updates, clean up the ACPI device object sysfs interface, add some quirks for backlight handling and IRQ overrides, fix assorted issues and clean up code. Specifics: - Check return value in acpi_db_convert_to_package() (Pei Xiao) - Detect FACS and allow setting the waking vector on reduced-hardware ACPI platforms (Jiaqing Zhao) - Allow ACPICA to represent semaphores as integers (Adrien Destugues) - Complete CXL 3.0 CXIMS structures support in ACPICA (Zhang Rui) - Make ACPICA support SPCR version 4 and add RISC-V SBI Subtype to DBG2 (Sia Jee Heng) - Implement the Dword_PCC Resource Descriptor Macro in ACPICA (Jose Marinho) - Correct the typo in struct acpi_mpam_msc_node member (Punit Agrawal) - Implement ACPI_WARNING_ONCE() and ACPI_ERROR_ONCE() and use them to prevent a Stall() violation warning from being printed every time this takes place (Vasily Khoruzhick) - Allow PCC Data Type in MCTP resource (Adam Young) - Fix memory leaks on acpi_ps_get_next_namepath() and acpi_ps_get_next_field() failures (Armin Wolf) - Add support for supressing leading zeros in hex strings when converting them to integers and update integer-to-hex-string conversions in ACPICA (Armin Wolf) - Add support for Windows 11 22H2 _OSI string (Armin Wolf) - Avoid warning for Dump Functions in ACPICA (Adam Lackorzynski) - Add extended linear address mode to HMAT MSCIS in ACPICA (Dave Jiang) - Handle empty connection_node in iasl (Aleksandrs Vinarskis) - Allow for more flexibility in _DSM args (Saket Dumbre) - Setup for ACPICA release 20240827 (Saket Dumbre) - Add ACPI device enumeration support for interrupt controller probing including taking dependencies into account (Sunil V L) - Implement ACPI-based interrupt controller probing on RISC-V (Sunil V L) - Add ACPI support for AIA in riscv-intc and add ACPI support to riscv-imsic, riscv-aplic, and sifive-plic (Sunil V L) - Do not release locks during operation region accesses in the ACPI EC driver (Rafael Wysocki) - Fix up the _STR handling in the ACPI device object sysfs interface, make it represent the device object attributes as an attribute group and make it rely on driver core functionality for sysfs attrubute management (Thomas Weißschuh) - Extend error messages printed to the kernel log when acpi_evaluate_dsm() fails to include revision and function number (David Wang) - Add a new AMDI0015 platform device ID to the ACPi APD driver for AMD SoCs (Shyam Sundar S K) - Use the driver core for the async probing management in the ACPI battery driver (Thomas Weißschuh) - Remove redundant initalizations of a local variable to NULL from the ACPI battery driver (Ilpo Järvinen) - Remove unneeded check in tps68470_pmic_opregion_probe() (Aleksandr Mishin) - Add support for setting the EPP register through the ACPI CPPC sysfs interface if it is in FFH (Mario Limonciello) - Fix MASK_VAL() usage in the ACPI CPPC library (Clément Léger) - Reduce the log level of a per-CPU message about idle states in the ACPI processor driver (Li RongQing) - Fix crash in exit_round_robin() in the ACPI processor aggregator device (PAD) driver (Seiji Nishikawa) - Add force_vendor quirk for Panasonic Toughbook CF-18 in the ACPI backlight driver (Hans de Goede) - Make the DMI checks related to backlight handling on Lenovo Yoga Tab 3 X90F less strict (Hans de Goede) - Enforce native backlight handling on Apple MacbookPro9,2 (Esther Shimanovich) - Add IRQ override quirks for Asus Vivobook Go E1404GAB and MECHREV GM7XG0M, and refine the TongFang GMxXGxx quirk (Li Chen, Tamim Khan, Werner Sembach) - Quirk ASUS ROG M16 to default to S3 sleep (Luke D. Jones) - Define and use symbols for device and class name lengths in the ACPI bus type code and make the code use strscpy() instead of strcpy() in several places (Muhammad Qasim Abdul Majeed)" * tag 'acpi-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (70 commits) ACPI: resource: Add another DMI match for the TongFang GMxXGxx ACPI: CPPC: Add support for setting EPP register in FFH ACPI: PM: Quirk ASUS ROG M16 to default to S3 sleep ACPI: video: Add force_vendor quirk for Panasonic Toughbook CF-18 ACPI: battery: use driver core managed async probing ACPI: button: Use strscpy() instead of strcpy() ACPI: resource: Skip IRQ override on Asus Vivobook Go E1404GAB ACPI: CPPC: Fix MASK_VAL() usage irqchip/sifive-plic: Add ACPI support ACPICA: Setup for ACPICA release 20240827 ACPICA: Allow for more flexibility in _DSM args ACPICA: iasl: handle empty connection_node ACPICA: HMAT: Add extended linear address mode to MSCIS ACPICA: Avoid warning for Dump Functions ACPICA: Add support for Windows 11 22H2 _OSI string ACPICA: Update integer-to-hex-string conversions ACPICA: Add support for supressing leading zeros in hex strings ACPICA: Allow for supressing leading zeros when using acpi_ex_convert_to_ascii() ACPICA: Fix memory leak if acpi_ps_get_next_field() fails ACPICA: Fix memory leak if acpi_ps_get_next_namepath() fails ... |
||
Linus Torvalds
|
64dd3b6a79 |
ARM:
* New Stage-2 page table dumper, reusing the main ptdump infrastructure * FP8 support * Nested virtualization now supports the address translation (FEAT_ATS1A) family of instructions * Add selftest checks for a bunch of timer emulation corner cases * Fix multiple cases where KVM/arm64 doesn't correctly handle the guest trying to use a GICv3 that wasn't advertised * Remove REG_HIDDEN_USER from the sysreg infrastructure, making things little simpler * Prevent MTE tags being restored by userspace if we are actively logging writes, as that's a recipe for disaster * Correct the refcount on a page that is not considered for MTE tag copying (such as a device) * When walking a page table to split block mappings, synchronize only at the end the walk rather than on every store * Fix boundary check when transfering memory using FFA * Fix pKVM TLB invalidation, only affecting currently out of tree code but worth addressing for peace of mind LoongArch: * Revert qspinlock to test-and-set simple lock on VM. * Add Loongson Binary Translation extension support. * Add PMU support for guest. * Enable paravirt feature control from VMM. * Implement function kvm_para_has_feature(). RISC-V: * Fix sbiret init before forwarding to userspace * Don't zero-out PMU snapshot area before freeing data * Allow legacy PMU access from guest * Fix to allow hpmcounter31 from the guest -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmbmghAUHHBib256aW5p QHJlZGhhdC5jb20ACgkQv/vSX3jHroPFQgf+Ijeqlx90BGy96pyzo/NkYKPeEc8G gKhlm8PdtdZYaRdJ53MVRLLpzbLuzqbwrn0ZX2tvoDRLzuAqTt2GTFoT6e2HtY5B Sf7KQMFwHWGtGklC1EmZ1fXsCocswpuAcexCLKLRBoWUcKABlgwV3N3vJo5gx/Ag 8XXhYpcLTh+p7bjMdJShQy019pTwEDE68pPVnL2NPzla1G6Qox7ZJIdOEMZXuyJA MJ4jbFWE/T8vLFUf/8MGQ/+bo+4140kzB8N9wkazNcBRoodY6Hx+Lm1LiZjNudO1 ilIdB4P3Ht+D8UuBv2DO5XTakfJz9T9YsoRcPlwrOWi/8xBRbt236gFB3Q== =sHTI -----END PGP SIGNATURE----- Merge tag 'for-linus-non-x86' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm updates from Paolo Bonzini: "These are the non-x86 changes (mostly ARM, as is usually the case). The generic and x86 changes will come later" ARM: - New Stage-2 page table dumper, reusing the main ptdump infrastructure - FP8 support - Nested virtualization now supports the address translation (FEAT_ATS1A) family of instructions - Add selftest checks for a bunch of timer emulation corner cases - Fix multiple cases where KVM/arm64 doesn't correctly handle the guest trying to use a GICv3 that wasn't advertised - Remove REG_HIDDEN_USER from the sysreg infrastructure, making things little simpler - Prevent MTE tags being restored by userspace if we are actively logging writes, as that's a recipe for disaster - Correct the refcount on a page that is not considered for MTE tag copying (such as a device) - When walking a page table to split block mappings, synchronize only at the end the walk rather than on every store - Fix boundary check when transfering memory using FFA - Fix pKVM TLB invalidation, only affecting currently out of tree code but worth addressing for peace of mind LoongArch: - Revert qspinlock to test-and-set simple lock on VM. - Add Loongson Binary Translation extension support. - Add PMU support for guest. - Enable paravirt feature control from VMM. - Implement function kvm_para_has_feature(). RISC-V: - Fix sbiret init before forwarding to userspace - Don't zero-out PMU snapshot area before freeing data - Allow legacy PMU access from guest - Fix to allow hpmcounter31 from the guest" * tag 'for-linus-non-x86' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (64 commits) LoongArch: KVM: Implement function kvm_para_has_feature() LoongArch: KVM: Enable paravirt feature control from VMM LoongArch: KVM: Add PMU support for guest KVM: arm64: Get rid of REG_HIDDEN_USER visibility qualifier KVM: arm64: Simplify visibility handling of AArch32 SPSR_* KVM: arm64: Simplify handling of CNTKCTL_EL12 LoongArch: KVM: Add vm migration support for LBT registers LoongArch: KVM: Add Binary Translation extension support LoongArch: KVM: Add VM feature detection function LoongArch: Revert qspinlock to test-and-set simple lock on VM KVM: arm64: Register ptdump with debugfs on guest creation arm64: ptdump: Don't override the level when operating on the stage-2 tables arm64: ptdump: Use the ptdump description from a local context arm64: ptdump: Expose the attribute parsing functionality KVM: arm64: Add memory length checks and remove inline in do_ffa_mem_xfer KVM: arm64: Move pagetable definitions to common header KVM: arm64: nv: Add support for FEAT_ATS1A KVM: arm64: nv: Plumb handling of AT S1* traps from EL2 KVM: arm64: nv: Make AT+PAN instructions aware of FEAT_PAN3 KVM: arm64: nv: Sanitise SCTLR_EL1.EPAN according to VM configuration ... |
||
Jisheng Zhang
|
8f1534e744
|
riscv: avoid Imbalance in RAS
Inspired by[1], modify the code to remove the code of modifying ra to avoid imbalance RAS (return address stack) which may lead to incorret predictions on return. Link: https://lore.kernel.org/linux-riscv/20240607061335.2197383-1-cyrilbur@tenstorrent.com/ [1] Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Cyril Bur <cyrilbur@tenstorrent.com> Link: https://lore.kernel.org/r/20240720170659.1522-1-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Palmer Dabbelt
|
7e340f4fad
|
Merge patch series "Svvptc extension to remove preventive sfence.vma"
Alexandre Ghiti <alexghiti@rivosinc.com> says: In RISC-V, after a new mapping is established, a sfence.vma needs to be emitted for different reasons: - if the uarch caches invalid entries, we need to invalidate it otherwise we would trap on this invalid entry, - if the uarch does not cache invalid entries, a reordered access could fail to see the new mapping and then trap (sfence.vma acts as a fence). We can actually avoid emitting those (mostly) useless and costly sfence.vma by handling the traps instead: - for new kernel mappings: only vmalloc mappings need to be taken care of, other new mapping are rare and already emit the required sfence.vma if needed. That must be achieved very early in the exception path as explained in patch 3, and this also fixes our fragile way of dealing with vmalloc faults. - for new user mappings: Svvptc makes update_mmu_cache() a no-op but we can take some gratuitous page faults (which are very unlikely though). Patch 1 and 2 introduce Svvptc extension probing. On our uarch that does not cache invalid entries and a 6.5 kernel, the gains are measurable: * Kernel boot: 6% * ltp - mmapstress01: 8% * lmbench - lat_pagefault: 20% * lmbench - lat_mmap: 5% Here are the corresponding numbers of sfence.vma emitted: * Ubuntu boot to login: Before: ~630k sfence.vma After: ~200k sfence.vma * ltp - mmapstress01 Before: ~45k After: ~6.3k * lmbench - lat_pagefault Before: ~665k After: 832 (!) * lmbench - lat_mmap Before: ~546k After: 718 (!) Thanks to Ved and Matt Evans for triggering the discussion that led to this patchset! * b4-shazam-merge: riscv: Stop emitting preventive sfence.vma for new userspace mappings with Svvptc riscv: Stop emitting preventive sfence.vma for new vmalloc mappings dt-bindings: riscv: Add Svvptc ISA extension description riscv: Add ISA extension parsing for Svvptc Link: https://lore.kernel.org/r/20240717060125.139416-1-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Steffen Persvold
|
1845d381f2
|
riscv: cacheinfo: Add back init_cache_level() function
commit
|
||
Jinjie Ruan
|
cea9d27705
|
riscv: Remove unused _TIF_WORK_MASK
Since commit |
||
Palmer Dabbelt
|
9b2863e2cc
|
Merge patch series "riscv: select ARCH_USE_SYM_ANNOTATIONS"
Jisheng Zhang <jszhang@kernel.org> says:
commit
|
||
Palmer Dabbelt
|
f25170a053
|
Merge patch series "riscv: stacktrace: Add USER_STACKTRACE support"
Jinjie Ruan <ruanjinjie@huawei.com> says: Add RISC-V USER_STACKTRACE support, and fix the fp alignment bug in perf_callchain_user() by the way as Björn pointed out. * b4-shazam-merge: riscv: stacktrace: Add USER_STACKTRACE support riscv: Fix fp alignment bug in perf_callchain_user() Link: https://lore.kernel.org/r/20240708032847.2998158-1-ruanjinjie@huawei.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Jisheng Zhang
|
5c178472af
|
riscv: define ILLEGAL_POINTER_VALUE for 64bit
This is used in poison.h for poison pointer offset. Based on current
SV39, SV48 and SV57 vm layout, 0xdead000000000000 is a proper value
that is not mappable, this can avoid potentially turning an oops to
an expolit.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Fixes:
|
||
Alexandre Ghiti
|
7a21b2e370
|
riscv: Stop emitting preventive sfence.vma for new userspace mappings with Svvptc
The preventive sfence.vma were emitted because new mappings must be made visible to the page table walker but Svvptc guarantees that it will happen within a bounded timeframe, so no need to sfence.vma for the uarchs that implement this extension, we will then take gratuitous (but very unlikely) page faults, similarly to x86 and arm64. This allows to drastically reduce the number of sfence.vma emitted: * Ubuntu boot to login: Before: ~630k sfence.vma After: ~200k sfence.vma * ltp - mmapstress01 Before: ~45k After: ~6.3k * lmbench - lat_pagefault Before: ~665k After: 832 (!) * lmbench - lat_mmap Before: ~546k After: 718 (!) Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20240717060125.139416-5-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Alexandre Ghiti
|
503638e0ba
|
riscv: Stop emitting preventive sfence.vma for new vmalloc mappings
In 6.5, we removed the vmalloc fault path because that can't work (see [1] [2]). Then in order to make sure that new page table entries were seen by the page table walker, we had to preventively emit a sfence.vma on all harts [3] but this solution is very costly since it relies on IPI. And even there, we could end up in a loop of vmalloc faults if a vmalloc allocation is done in the IPI path (for example if it is traced, see [4]), which could result in a kernel stack overflow. Those preventive sfence.vma needed to be emitted because: - if the uarch caches invalid entries, the new mapping may not be observed by the page table walker and an invalidation may be needed. - if the uarch does not cache invalid entries, a reordered access could "miss" the new mapping and traps: in that case, we would actually only need to retry the access, no sfence.vma is required. So this patch removes those preventive sfence.vma and actually handles the possible (and unlikely) exceptions. And since the kernel stacks mappings lie in the vmalloc area, this handling must be done very early when the trap is taken, at the very beginning of handle_exception: this also rules out the vmalloc allocations in the fault path. Link: https://lore.kernel.org/linux-riscv/20230531093817.665799-1-bjorn@kernel.org/ [1] Link: https://lore.kernel.org/linux-riscv/20230801090927.2018653-1-dylan@andestech.com [2] Link: https://lore.kernel.org/linux-riscv/20230725132246.817726-1-alexghiti@rivosinc.com/ [3] Link: https://lore.kernel.org/lkml/20200508144043.13893-1-joro@8bytes.org/ [4] Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Yunhui Cui <cuiyunhui@bytedance.com> Link: https://lore.kernel.org/r/20240717060125.139416-4-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Alexandre Ghiti
|
a6efe33cc5
|
riscv: Add ISA extension parsing for Svvptc
Add support to parse the Svvptc string in the riscv,isa string. Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240717060125.139416-2-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Jisheng Zhang
|
7c9d980e46
|
riscv: select ARCH_USE_SYM_ANNOTATIONS
Now, riscv has been converted to the new style SYM_ assembler annotations. So select ARCH_USE_SYM_ANNOTATIONS to ensure the deprecated macros such as ENTRY(), END(), WEAK() and so on are not available and we don't regress. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-By: Clément Léger <cleger@rivosinc.com> Link: https://lore.kernel.org/r/20240709160536.3690-3-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Jisheng Zhang
|
6868d12e02
|
riscv: errata: sifive: Use SYM_*() assembly macros
ENTRY()/END() macros are deprecated and we should make use of the new SYM_*() macros [1] for better annotation of symbols. Replace the deprecated ones with the new ones. [1] https://docs.kernel.org/core-api/asm-annotations.html Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-By: Clément Léger <cleger@rivosinc.com> Link: https://lore.kernel.org/r/20240709160536.3690-2-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Jinjie Ruan
|
1a74833182
|
riscv: stacktrace: Add USER_STACKTRACE support
Currently, userstacktrace is unsupported for riscv. So use the perf_callchain_user() code as blueprint to implement the arch_stack_walk_user() which add userstacktrace support on riscv. Meanwhile, we can use arch_stack_walk_user() to simplify the implementation of perf_callchain_user(). A ftrace test case is shown as below: # cd /sys/kernel/debug/tracing # echo 1 > options/userstacktrace # echo 1 > options/sym-userobj # echo 1 > events/sched/sched_process_fork/enable # cat trace ...... bash-178 [000] ...1. 97.968395: sched_process_fork: comm=bash pid=178 child_comm=bash child_pid=231 bash-178 [000] ...1. 97.970075: <user stack trace> => /lib/libc.so.6[+0xb5090] Also a simple perf test is ok as below: # perf record -e cpu-clock --call-graph fp top # perf report --call-graph ..... [[31m 66.54%[[m 0.00% top [kernel.kallsyms] [k] ret_from_exception | ---ret_from_exception | |--[[31m58.97%[[m--do_trap_ecall_u | | | |--[[31m17.34%[[m--__riscv_sys_read | | ksys_read | | | | | --[[31m16.88%[[m--vfs_read | | | | | |--[[31m10.90%[[m--seq_read Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Tested-by: Jinjie Ruan <ruanjinjie@huawei.com> Cc: Björn Töpel <bjorn@kernel.org> Link: https://lore.kernel.org/r/20240708032847.2998158-3-ruanjinjie@huawei.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Jinjie Ruan
|
22ab08955e
|
riscv: Fix fp alignment bug in perf_callchain_user()
The standard RISC-V calling convention said:
"The stack grows downward and the stack pointer is always
kept 16-byte aligned".
So perf_callchain_user() should check whether 16-byte aligned for fp.
Link: https://riscv.org/wp-content/uploads/2015/01/riscv-calling.pdf
Fixes:
|
||
Paolo Bonzini
|
0cdcc99eea |
Merge tag 'kvm-riscv-6.12-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv changes for 6.12 - Fix sbiret init before forwarding to userspace - Don't zero-out PMU snapshot area before freeing data - Allow legacy PMU access from guest - Fix to allow hpmcounter31 from the guest |
||
Stuart Menefy
|
d6a1928134
|
riscv: Remove redundant restriction on memory size
The original reason for reserving the top 4GiB of the direct map (space for modules/BPF/kernel) hasn't applied since the address map was reworked for KASAN. Signed-off-by: Stuart Menefy <stuart.menefy@codasip.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20240624121723.2186279-1-stuart.menefy@codasip.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Changbin Du
|
7587a3602b
|
riscv: vdso: do not strip debugging info for vdso.so.dbg
The vdso.so.dbg is a debug version of vdso and could be used for debugging purpose. For example, perf-annotate requires debugging info to show source lines. So let's keep its debugging info. Signed-off-by: Changbin Du <changbin.du@huawei.com> Reviewed-by: Cyril Bur <cyrilbur@tenstorrent.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20240611040947.3024710-1-changbin.du@huawei.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Alice Ryhl
|
d077242d68 |
rust: support for shadow call stack sanitizer
Add all of the flags that are needed to support the shadow call stack (SCS) sanitizer with Rust, and updates Kconfig to allow only configurations that work. The -Zfixed-x18 flag is required to use SCS on arm64, and requires rustc version 1.80.0 or greater. This restriction is reflected in Kconfig. When CONFIG_DYNAMIC_SCS is enabled, the build will be configured to include unwind tables in the build artifacts. Dynamic SCS uses the unwind tables at boot to find all places that need to be patched. The -Cforce-unwind-tables=y flag ensures that unwind tables are available for Rust code. In non-dynamic mode, the -Zsanitizer=shadow-call-stack flag is what enables the SCS sanitizer. Using this flag requires rustc version 1.82.0 or greater on the targets used by Rust in the kernel. This restriction is reflected in Kconfig. It is possible to avoid the requirement of rustc 1.80.0 by using -Ctarget-feature=+reserve-x18 instead of -Zfixed-x18. However, this flag emits a warning during the build, so this patch does not add support for using it and instead requires 1.80.0 or greater. The dependency is placed on `select HAVE_RUST` to avoid a situation where enabling Rust silently turns off the sanitizer. Instead, turning on the sanitizer results in Rust being disabled. We generally do not want changes to CONFIG_RUST to result in any mitigations being changed or turned off. At the time of writing, rustc 1.82.0 only exists via the nightly release channel. There is a chance that the -Zsanitizer=shadow-call-stack flag will end up needing 1.83.0 instead, but I think it is small. Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Kees Cook <kees@kernel.org> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20240829-shadow-call-stack-v7-1-2f62a4432abf@google.com [ Fixed indentation using spaces. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
Linus Torvalds
|
8581ae1ea0 |
RISC-V Fixes for 6.11-rc8
* Two fixes for smp_processor_id() calls in preemptible sections: one if the perf driver, and one in the fence.i prctl. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmbjDTkTHHBhbG1lckBk YWJiZWx0LmNvbQAKCRAuExnzX7sYiRsKD/428yAcDT6JKjG+jzYnMARDxl+OS0hJ KKwfeglvpPXWqZoZlyhPgJMJ/fNalrH/dVwl01a3Aobjy8/JV6W6L2Cc/lwRBNXv O+nfCzzJoZs+v7D0MR2Ad101vfToafDaiZ9Q6jH4/9yi/m5zAaIHdEnjYQQW5rLc FMnfGDHXo40WkrnjEjefeh7n88d5dtyD3szwS8khSnJulGFRHHWW0XL54wVeY3wE NvLKdD5PDR7kzOE6BvofPQ1tIJxpWnE+jqSgHmS1eYKlwwzb1kvtGXiktUl/gcwb /+jFgK49gqWMpx1ji+utw4R357uIZY0DPIiMvY7K5PjeY+TXtltTBgfyvjklpLWm YrZ1snpMiMl/VTxFYVFMCvowK/DvylvSQ737zwMaxTq/DGwvr8GPuRO1Pnwc/3QZ wCLy3rsK56LE46+9IrYeauYNiOl1bd6znuASzrPhr8Ecexm2DW+JZqRRZCMl3UTK p9hrr3CxUT4hi0bksjkSOBks7cLNp3Rqa/fEBtM6YKKzSU6NlEoNpuiH7sjh7ETE Zk4qUjRPiRcje0XL2NTKfpKSGuxK/xP4188aYA5jZ1QxO/zditk8BrS5WRfgEoPr gjNapO25nrnJbgi9PaClMdeYNV//Fi/0vjpDjw6pYfJaZSE0sWMqp5/bWt5Bsy2A e/OyJ+U4TPY4vQ== =pEDD -----END PGP SIGNATURE----- Merge tag 'riscv-for-linus-6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - Two fixes for smp_processor_id() calls in preemptible sections: one if the perf driver, and one in the fence.i prctl. * tag 'riscv-for-linus-6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Disable preemption while handling PR_RISCV_CTX_SW_FENCEI_OFF drivers: perf: Fix smp_processor_id() use in preemptible code |
||
Palmer Dabbelt
|
9ea7b92b77
|
Merge patch series "remove size limit on XIP kernel"
Nam Cao <namcao@linutronix.de> says: Hi, For XIP kernel, the writable data section is always at offset specified in XIP_OFFSET, which is hard-coded to 32MB. Unfortunately, this means the read-only section (placed before the writable section) is restricted in size. This causes build failure if the kernel gets too large. This series remove the use of XIP_OFFSET one by one, then remove this macro entirely at the end, with the goal of lifting this size restriction. Also some cleanup and documentation along the way. * b4-shazam-merge riscv: remove limit on the size of read-only section for XIP kernel riscv: drop the use of XIP_OFFSET in create_kernel_page_table() riscv: drop the use of XIP_OFFSET in kernel_mapping_va_to_pa() riscv: drop the use of XIP_OFFSET in XIP_FIXUP_FLASH_OFFSET riscv: drop the use of XIP_OFFSET in XIP_FIXUP_OFFSET riscv: replace misleading va_kernel_pa_offset on XIP kernel riscv: don't export va_kernel_pa_offset in vmcoreinfo for XIP kernel riscv: cleanup XIP_FIXUP macro riscv: change XIP's kernel_map.size to be size of the entire kernel ... Link: https://lore.kernel.org/r/cover.1717789719.git.namcao@linutronix.de Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Nam Cao
|
b635a84bde
|
riscv: remove limit on the size of read-only section for XIP kernel
XIP_OFFSET is the hard-coded offset of writable data section within the kernel. By hard-coding this value, the read-only section of the kernel (which is placed before the writable data section) is restricted in size. This causes build failures if the kernel gets too big [1]. Remove this limit. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202404211031.J6l2AfJk-lkp@intel.com [1] Signed-off-by: Nam Cao <namcao@linutronix.de> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/3bf3a77be10ebb0d8086c028500baa16e7a8e648.1717789719.git.namcao@linutronix.de Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Nam Cao
|
a7cfb99943
|
riscv: drop the use of XIP_OFFSET in create_kernel_page_table()
XIP_OFFSET is the hard-coded offset of writable data section within the kernel. By hard-coding this value, the read-only section of the kernel (which is placed before the writable data section) is restricted in size. As a preparation to remove this hard-coded value entirely, stop using XIP_OFFSET in create_kernel_page_table(). Instead use _sdata and _start to do the same thing. Signed-off-by: Nam Cao <namcao@linutronix.de> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/4ea3f222a7eb9f91c04b155ff2e4d3ef19158acc.1717789719.git.namcao@linutronix.de Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Nam Cao
|
75fdf791df
|
riscv: drop the use of XIP_OFFSET in kernel_mapping_va_to_pa()
XIP_OFFSET is the hard-coded offset of writable data section within the kernel. By hard-coding this value, the read-only section of the kernel (which is placed before the writable data section) is restricted in size. As a preparation to remove this hard-coded macro XIP_OFFSET entirely, remove the use of XIP_OFFSET in kernel_mapping_va_to_pa(). The macro XIP_OFFSET is used in this case to check if the virtual address is mapped to Flash or to RAM. The same check can be done with kernel_map.xiprom_sz. Signed-off-by: Nam Cao <namcao@linutronix.de> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/644c13d9467525a06f5d63d157875a35b2edb4bc.1717789719.git.namcao@linutronix.de Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Nam Cao
|
23311f57ee
|
riscv: drop the use of XIP_OFFSET in XIP_FIXUP_FLASH_OFFSET
XIP_OFFSET is the hard-coded offset of writable data section within the kernel. By hard-coding this value, the read-only section of the kernel (which is placed before the writable data section) is restricted in size. As a preparation to remove this hard-coded macro XIP_OFFSET entirely, stop using XIP_OFFSET in XIP_FIXUP_FLASH_OFFSET. Instead, use __data_loc and _sdata to do the same thing. While at it, also add a description for XIP_FIXUP_FLASH_OFFSET. Signed-off-by: Nam Cao <namcao@linutronix.de> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/7b3319657edd1822f3457e7e7c07aaa326cc2f87.1717789719.git.namcao@linutronix.de Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Nam Cao
|
e4eac34fed
|
riscv: drop the use of XIP_OFFSET in XIP_FIXUP_OFFSET
XIP_OFFSET is the hard-coded offset of writable data section within the kernel. By hard-coding this value, the read-only section of the kernel (which is placed before the writable data section) is restricted in size. As a preparation to remove this hard-coded macro XIP_OFFSET entirely, stop using XIP_OFFSET in XIP_FIXUP_OFFSET. Instead, use CONFIG_PHYS_RAM_BASE and _sdata to do the same thing. While at it, also add a description for XIP_FIXUP_OFFSET. Signed-off-by: Nam Cao <namcao@linutronix.de> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/dba0409518b14ee83b346e099b1f7f934daf7b74.1717789719.git.namcao@linutronix.de Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |