Increasing the virtual timeout time to account for scenarios
that may require more time, like DisplayPort Multi-Stream Transport
(DP MST), where the disconnect time can be extended longer than
usual.
The recommended timeout range is 5-10 seconds, of which
we will take the lower bound.
Signed-off-by: Casey Bowman <casey.g.bowman@intel.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210210192041.17022-1-casey.g.bowman@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The raw message frame length is unaligned and explicitly marked as
little endian. It should not be accessed without the appropriate
accessor functions. Fix this.
Note that payload.len already contains the correct length after parsing
via sshp_parse_frame(), so we can simply use that instead.
Reported-by: kernel-test-robot <lkp@intel.com>
Fixes: c167b9c7e3 ("platform/surface: Add Surface Aggregator subsystem")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Mark Gross <mgross@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210211124149.2439007-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add a new command to get and set TRL (Turbo Ratio Limits). This will
help users to get/set TRL, when the direct MSR access is removed.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Add a new command "turbo-mode", which allows to enable/disable
turbo mode globally. This uses base-frequency as the max frequency
when turbo-mode is disabled. This allows soft disable turbo mode
without depending on kernel or BIOS.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
The only usage of it is to assign its address to the ops field in the
regulator_desc struct, which is a pointer to const struct regulator_ops.
Make it const to allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210206232152.58046-1-rikard.falkeborn@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Some Surface Book 2 and 3 models have a discrete GPU (dGPU) that is
hot-pluggable. On those devices, the dGPU is contained in the base,
which can be separated from the tablet part (containing CPU and
touchscreen) while the device is running.
It (in general) is presented as/behaves like a standard PCIe hot-plug
capable device, however, this device can also be put into D3cold. In
D3cold, the device itself is turned off and can thus not submit any
standard PCIe hot-plug events. To properly detect hot-(un)plugging while
the dGPU is in D3cold, out-of-band signaling is required. Without this,
the device state will only get updated during the next bus-check, eg.
via a manually issued lspci call.
This commit adds a driver to handle out-of-band PCIe hot-(un)plug events
on Microsoft Surface devices. On those devices, said events can be
detected via GPIO interrupts, which are then forwarded to the
corresponding ACPI DSM calls by this driver. The DSM then takes care of
issuing the appropriate bus-/device-check, causing the PCI core to
properly pick up the device change.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210205012657.1951753-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Neither original structure nor platform_data is declared with const.
Drop mistakenly added const when assing platform_data.
Fixes: a507e5d90f ("platform/x86: intel_scu_wdt: Get rid of custom x86 model comparison")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210204150508.62659-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
LED class support is needed by the ideapad-laptop module to compile after
the referenced commit. Add missing NEW_LEDS and LEDS_CLASS to Kconfig.
Fixes: 503325f84b ("platform/x86: ideapad-laptop: add keyboard backlight control support")
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210204142010.356675-1-pobrn@protonmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
ACPI_EXCEPTION is only intended for internal use by the ACPICA code.
ACPI_EXCEPTION was being used here to change the apci_status code into
something human-readable, use acpi_format_exception() for this instead,
which is the proper way to do this outside of ACPICA.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210204140205.268344-1-hdegoede@redhat.com
With the #if IS_ENABLED(CONFIG_ACPI_PLATFORM_PROFILE), we get the following
errors when thinkpad_acpi is builtin while CONFIG_ACPI_PLATFORM_PROFILE=m :
drivers/platform/x86/thinkpad_acpi.c:10186: undefined reference to `platform_profile_notify'
drivers/platform/x86/thinkpad_acpi.c:10226: undefined reference to `platform_profile_register'
drivers/platform/x86/thinkpad_acpi.c:10246: undefined reference to `platform_profile_remove'
This could be fixed by changing the IS_ENABLED to IS_REACHABLE, but
I believe that it is better to just switch to using depends on.
Using depends on ensures that platform-profile support is always
available when thinkpad_acpi is build, hopefully leading to less
confusing bug-reports about it sometimes not working.
Cc: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210204140158.268289-2-hdegoede@redhat.com
Some of the new dytc handling functions are not marked static, even though
they are only used internally.
Mark these static, fixing the following compiler warnings:
drivers/platform/x86/thinkpad_acpi.c:10081:5: warning: no previous prototype for 'dytc_profile_get' [-Wmissing-prototypes]
drivers/platform/x86/thinkpad_acpi.c:10095:5: warning: no previous prototype for 'dytc_cql_command' [-Wmissing-prototypes]
drivers/platform/x86/thinkpad_acpi.c:10133:5: warning: no previous prototype for 'dytc_profile_set' [-Wmissing-prototypes]
Cc: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210204140158.268289-1-hdegoede@redhat.com
Explicitly check the status rather then relying on output.pointer staying
NULL on an error. This silences the following compiler warning:
drivers/platform/surface/surface3-wmi.c:60:14: warning: variable 'status' set but not used [-Wunused-but-set-variable]
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210204113848.105994-1-hdegoede@redhat.com
A user without a Dell system doesn't need to pick any of these
drivers.
Users with a Dell system can enable this submenu and all drivers
behind it will be enabled.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Link: https://lore.kernel.org/r/20210203195832.2950605-1-mario.limonciello@dell.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Document the conservation_mode attributes provided by the ideapad-laptop module.
Fixes: ade5029618 ("platform/x86: ideapad-laptop: Expose conservation mode switch")
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-30-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The documentation referred to non-existent device
attributes under a non-existent platform device.
Update it with the current location of the attributes.
Fixes: b5c37b798f ("ideapad_laptop: convert ideapad device/driver to platform bus")
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-29-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Certain models have a so-called "always on USB charging" feature,
which enables USB charging even when the computer is turned off
or suspended, and which may be controlled/queried using the
SALS/HALS ACPI methods. Expose this functionality via a new device
attribute (usb_charging). Tested on: Lenovo YOGA 520-14IKB 80X8
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-28-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On certain models it is possible to control/query the
keyboard backlight via the SALS/HALS ACPI methods. Add
support for that, and register an LED class device to expose
this functionality. Tested on: Lenovo YOGA 520-14IKB 80X8
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-27-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Consumers can determine if the value of an attribute changed much more
easily if changes are broadcast using sysfs_notify(), so utilize it.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-26-pobrn@protonmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fix all checkpatch warnings. Reorder variable definitions from
longest to shortest. Add more whitespaces for better readability.
Rename variables named `ret` to `err` where appropriate. Reorder
sysfs attributes show/store callbacks and the `ideapad_attributes`
array in lexicographic order. And other minor formatting changes.
No significant functional changes are intended.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-25-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The touchpad can be enabled/disabled via this attribute on a Lenovo
Yoga 520-14IKB. Allow writing as it provides legitimate functionality.
This reverts commit 7f36314599.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-24-pobrn@protonmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Minor formatting changes. Use seq_puts() where possible.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-23-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Remove conservation mode reporting since it is already reported via
the appropriate device attribute, and its state can be deduced from
the value of GBMD. Add the return value of the GBMD and HALS ACPI
methods to the output. Use seq_puts() where possible.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-22-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Bit 30 of _CFG is set if the device has a touchpad, check that
in is_visible() for the touchpad attribute. Show 'touchpad', if
supported, in the list of capabilities in the 'cfg' debugfs file.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-21-pobrn@protonmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Bit 9 in the return value of the HALS ACPI method is set if
Fn-lock is supported. Change ideapad_check_features() to check it.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-20-pobrn@protonmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Store the supported features in the driver private
data, and modify the is_visible() callback to use it,
and create ideapad_check_features() to populate it.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-19-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Create dedicated helper functions for accessing the main ACPI methods:
GBMD, SMBC, HALS, SALS; and utilize them. Use `unsigned long` consistently
in every ACPI helper wherever possible. Change names to better express
purpose. Do not assign values to output parameters in case of failure.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-18-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Group and rename constants depending on which ACPI interface
they pertain to, and rename CFG_X constants to CFG_CAP_X.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-17-pobrn@protonmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Do not handle zero length buffer separately. Use kstrtouint() instead
of sscanf(). Use kstrtobool() in store_ideapad_cam(). These
introduce minor ABI changes, but it is expected that no users rely
on the previous behavior. Thus the change is deemed justifed.
Additionally, use `!!` to convert to `int` and use the "%d" format
specifier in sysfs_emit() for boolean-like attributes.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-16-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Consumers can differentiate an error from a successful read much more
easily if the read() call fails with an appropriate errno instead of
returning a magic string like "-1". This introduces an ABI change, but
not many users are expected to be relying on the previous behavior,
and this change makes this module conforming to the standard behavior
that sysfs attribute show/store callbacks return an appropriate
errno in case of failure. Thus the ABI breakage is deemed justified.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-15-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
ACPI helpers returned -1 in case of failure. Convert these
functions to return appropriate error codes, and convert
their users to propagate these error codes accordingly.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-14-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Having the device name in the log message makes it easier to determine
in the context of which device the message was printed, so utilize the
appropriate variants of dev_{err,warn,...} when printing log messages.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-12-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The current code used a hand-crafted formula to convert milliseconds to
jiffies, replace it with the msecs_to_jiffies() function. Furthermore,
use a while loop instead of for loop for shorter lines and simplicity.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-11-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The current code used the combination of a for loop + test_bit,
which can be simplified using for_each_set_bit(), so utilize that.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-10-pobrn@protonmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Use kobj_to_dev() instead of open-coding the container_of() macro.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-9-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Use device_{add,remove}_group instead of sysfs_{add,remove}_group.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-8-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
sysfs_emit() has been introduced to make it less ambiguous
which function is preferred when writing to the output
buffer in a device attribute's show() callback. Convert the
ideapad-laptop module to utilize this new helper function.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-7-pobrn@protonmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
ideapad_dytc_profile_exit() is not called in ideapad_acpi_add()
in the error path. Add the missing call.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-6-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Managing includes is easier when they are
sorted, so sort them lexicographically.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-5-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Use a variable with type `acpi_status` to store the return value of
ACPI methods instead of a plain `int`. And use ACPI_{SUCCESS,FAILURE}
macros where possible instead of direct comparison.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-4-pobrn@protonmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The checks that are removed test pointers which should not
be NULL. If they are NULL, that indicates a bug in
a different part of the kernel. Instead of silently
bailing out, let it fail loudly.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-3-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The driver core already sets the driver specific data on
bind failure or removal. Thus the call is unnecessary.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-2-pobrn@protonmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Sapphire Rapids uncore frequency control is the same as Skylake and
Ice Lake. Add the Sapphire Rapids CPU model number to the match array.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20210203114320.1398801-1-dedekind1@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
All devices that expose Intel Platform Monitoring Technology (PMT)
crashlog are currently owned by the intel_pmt MFD driver. Therefore make
the crashlog driver depend on the MFD driver for build.
Fixes: 5ef9998c96 ("platform/x86: Intel PMT Crashlog capability driver")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20210126205508.30907-3-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
All devices that expose Intel Platform Monitoring Technology (PMT)
telemetry are currently owned by the intel_pmt MFD driver. Therefore make
the telemetry driver depend on the MFD driver for build.
Fixes: 68fe8e6e2c ("platform/x86: Intel PMT Telemetry capability driver")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20210126205508.30907-2-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fix error in Kconfig that exposed INTEL_PMT_CLASS as a user selectable
option. It is already selected by INTEL_PMT_TELEMETRY and
INTEL_PMT_CRASHLOG which are user selectable.
Fixes: e2729113ce ("platform/x86: Intel PMT class driver")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20210126205508.30907-1-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The braces of the unlikely() macro inside the if condition only cover
the subtraction part, not the whole statement. This causes the result of
the subtraction to be converted to zero or one. While that still works
in this context, it causes static analysis tools to complain (and is
just plain wrong).
Fix the bracket placement and, while at it, simplify the if-condition.
Also add a comment to the if-condition explaining what we expect the
result to be and what happens on the failure path, as it seems to have
caused a bit of confusion.
This commit should not cause any difference in behavior or generated
code.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: c167b9c7e3 ("platform/surface: Add Surface Aggregator subsystem")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210126172202.1428367-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
