Commit Graph

14 Commits

Author SHA1 Message Date
Dmitry Torokhov
aef01aad89 Input: matrix-keypad - switch to using generic device properties
Instead of being OF-specific, let's switch to using generic device
properties, which will make this code usable on ACPI, device tree and
legacy boards that use property sets.

As part of the change let's rename matrix_keypad_parse_of_params() to
matrix_keypad_parse_properties().

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-31 11:31:48 -08:00
Dmitry Torokhov
6d32af019a Merge branch 'next' into for-linus
Second round of input updates for 3.19.
2014-12-18 10:02:39 -08:00
Linus Walleij
7c12a5b19e Input: stmpe - bias keypad columns properly
All keypad column pins used as inputs should be pulled up on the STMPE24xx,
but this is not done by the current driver.  Add some logic that will do
this properly. The STMPE1601 also has a keypad controller, but explicitly
does *NOT* require you to set up any pull-ups.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-15 22:25:38 -08:00
Linus Walleij
a4164863e1 Input: stmpe - enforce device tree only mode
The STMPE keypad controller is only used with device tree configured
systems, so force the configuration to come from device tree only, and now
actually get the rows and cols from the device tree too.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-15 21:46:12 -08:00
Linus Walleij
2175b0f739 Input: stmpe-keypad - fix valid key line bitmask
The bitmask comment says it will enable GPIO 8-14 and 16-20 for keypad use,
but it actually enables GPIO 8-11 and 13-20 due to a bit error.

Instead of masking of the "hole" at GPIO 12 (which is used for keypad
output 4) mask of the proper "hole" at GPIO 15.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-24 14:54:45 -07:00
Paul Gortmaker
bf9a9f8e51 Input: delete non-required instances of include <linux/init.h>
None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>.  Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-01-06 23:23:57 -08:00
Dmitry Torokhov
6ea32387a0 Input: stmpe-keypad - add support for Device Tree bindings
This patch allows the STMPE driver to be successfully probed and
initialised when Device Tree support is enabled. Besides the usual
platform data changes, we also separate the process of filling in
the 'in use' pin bitmap, as we have to extract the information from
Device Tree in the DT boot case.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24 00:21:49 -08:00
Bill Pemberton
e2619cf78e Input: remove use of __devexit
CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24 00:05:38 -08:00
Bill Pemberton
5298cc4cc7 Input: remove use of __devinit
CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24 00:05:19 -08:00
Bill Pemberton
1cb0aa8817 Input: remove use of __devexit_p
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24 00:03:48 -08:00
Viresh Kumar
aaa4f2a7f6 Input: stmpe-keyboard - switch to using managed resources
This patch frees stmpe-keyboard driver from burden of freeing resources :)
devm_* derivatives of multiple routines are used while allocating resources,
which would be freed automatically by kernel.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-10 00:30:33 -08:00
Dmitry Torokhov
1932811f42 Input: matrix-keymap - uninline and prepare for device tree support
Change matrix-keymap helper to be out-of-line, like sparse keymap,
allow the helper perform basic keymap validation and return errors,
and prepare for device tree support.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10 22:38:47 -07:00
JJ Ding
5146c84f87 Input: keyboard - use macro module_platform_driver()
Commit 940ab88962 introduced a new macro to
save some platform_driver boilerplate code. Use it.

Signed-off-by: JJ Ding <dgdunix@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-30 23:41:41 -08:00
Rabin Vincent
76f1084531 input: Add STMPE keypad driver
Add an input driver for the keypad on STMPE I/O expanders.  This driver
uses the common support provided by the STMPE MFD driver.

Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12 11:27:56 +02:00