Commit Graph

426 Commits

Author SHA1 Message Date
Gustavo A. R. Silva
df561f6688 treewide: Use fallthrough pseudo-keyword
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-23 17:36:59 -05:00
Sergey Senozhatsky
7b4b45555c media: videobuf2: add queue memory consistency parameter
Preparations for future V4L2_FLAG_MEMORY_NON_CONSISTENT support.

Extend vb2_core_reqbufs() parameters list to accept requests'
->flags, which will be used for memory consistency configuration.

An attempt to allocate a buffer with consistency requirements
which don't match queue's consistency model will fail.

Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-06-23 13:31:12 +02:00
Brad Love
9f984cacf4 media: dvbdev: Fix tuner->demod media controller link
Fixes bug exposed by:

[a3fbc2e6bb: media: mc-entity.c: use WARN_ON, validate link pads]

The dvbdev incorrectly requests a tuner sink pad to connect to a demux
sink pad. The media controller failure percolates back and the dvb device
creation fails. Fix this by requesting a tuner source pad. Instead of
forcing that pad to be index zero, check if a negative integer error
is returned. A note is added that first source pad found is chosen.

Affected bridges cx231xx and em28xx printed the below warning[s]
when a variety of media controller dvb enabled devices were connected.
The warning returns an error causing all affected devices to fail DVB
device creation.

[  253.138332] ------------[ cut here ]------------
[  253.138339] WARNING: CPU: 0 PID: 1550 at drivers/media/mc/mc-entity.c:669 media_create_pad_link+0x1e0/0x200 [mc]
[  253.138339] Modules linked in: si2168 em28xx_dvb(+) em28xx si2157 lgdt3306a cx231xx_dvb dvb_core cx231xx_alsa cx25840 cx231xx tveeprom cx2341x i2c_mux videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc ir_rc5_decoder rc_hauppauge mceusb rc_core eda
c_mce_amd kvm nls_iso8859_1 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper efi_pstore wmi_bmof k10temp asix usbnet mii nouveau snd_hda_codec_realtek snd_hda_codec_generic input_leds ledtrig_audio snd_hda_codec_hdmi mxm_wmi snd_hda_in
tel video snd_intel_dspcfg ttm snd_hda_codec drm_kms_helper snd_hda_core drm snd_hwdep snd_seq_midi snd_seq_midi_event i2c_algo_bit snd_pcm snd_rawmidi fb_sys_fops snd_seq syscopyarea sysfillrect snd_seq_device sysimgblt snd_timer snd soundcore ccp mac_hid sch_fq_codel parport_p
c ppdev lp parport ip_tables x_tables autofs4 vfio_pci irqbypass vfio_virqfd vfio_iommu_type1 vfio hid_generic usbhid hid i2c_piix4 ahci libahci wmi gpio_amdpt
[  253.138370]  gpio_generic
[  253.138372] CPU: 0 PID: 1550 Comm: modprobe Tainted: G        W         5.7.0-rc2+ #181
[  253.138373] Hardware name: MSI MS-7A39/B350M GAMING PRO (MS-7A39), BIOS 2.G0 04/27/2018
[  253.138376] RIP: 0010:media_create_pad_link+0x1e0/0x200 [mc]
[  253.138378] Code: 26 fd ff ff 44 8b 4d d0 eb d9 0f 0b 41 b9 ea ff ff ff 44 89 c8 c3 0f 0b 41 b9 ea ff ff ff eb f2 0f 0b 41 b9 ea ff ff ff eb e8 <0f> 0b 41 b9 ea ff ff ff eb af 0f 0b 41 b9 ea ff ff ff eb a5 66 90
[  253.138379] RSP: 0018:ffffb9ecc0ee7a78 EFLAGS: 00010246
[  253.138380] RAX: ffff943f706c99d8 RBX: 0000000000000000 RCX: 0000000000000000
[  253.138381] RDX: ffff943f613e0180 RSI: 0000000000000000 RDI: ffff943f706c9958
[  253.138381] RBP: ffffb9ecc0ee7ab0 R08: 0000000000000001 R09: ffff943f613e0180
[  253.138382] R10: ffff943f613e0180 R11: ffff943f706c9400 R12: 0000000000000000
[  253.138383] R13: 0000000000000001 R14: ffff943f706c9958 R15: 0000000000000001
[  253.138384] FS:  00007f3cd29ba540(0000) GS:ffff943f8ec00000(0000) knlGS:0000000000000000
[  253.138385] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  253.138385] CR2: 000055f7de0ca830 CR3: 00000003dd208000 CR4: 00000000003406f0
[  253.138386] Call Trace:
[  253.138392]  media_create_pad_links+0x104/0x1b0 [mc]
[  253.138397]  dvb_create_media_graph+0x350/0x5f0 [dvb_core]
[  253.138402]  em28xx_dvb_init+0x5ea/0x2600 [em28xx_dvb]
[  253.138408]  em28xx_register_extension+0x63/0xc0 [em28xx]
[  253.138410]  ? 0xffffffffc039c000
[  253.138412]  em28xx_dvb_register+0x15/0x1000 [em28xx_dvb]
[  253.138416]  do_one_initcall+0x71/0x250
[  253.138418]  ? do_init_module+0x27/0x22e
[  253.138421]  ? _cond_resched+0x1a/0x50
[  253.138423]  ? kmem_cache_alloc_trace+0x1ec/0x270
[  253.138425]  ? __vunmap+0x1e3/0x240
[  253.138427]  do_init_module+0x5f/0x22e
[  253.138430]  load_module+0x2525/0x2d40
[  253.138436]  __do_sys_finit_module+0xe5/0x120
[  253.138438]  ? __do_sys_finit_module+0xe5/0x120
[  253.138442]  __x64_sys_finit_module+0x1a/0x20
[  253.138443]  do_syscall_64+0x57/0x1b0
[  253.138445]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  253.138446] RIP: 0033:0x7f3cd24dc839
[  253.138448] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48
[  253.138449] RSP: 002b:00007ffe4fc514d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[  253.138450] RAX: ffffffffffffffda RBX: 000055a9237f63f0 RCX: 00007f3cd24dc839
[  253.138451] RDX: 0000000000000000 RSI: 000055a922c3ad2e RDI: 0000000000000000
[  253.138451] RBP: 000055a922c3ad2e R08: 0000000000000000 R09: 0000000000000000
[  253.138452] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[  253.138453] R13: 000055a9237f5550 R14: 0000000000040000 R15: 000055a9237f63f0
[  253.138456] ---[ end trace a60f19c54aa96ec4 ]---

[  234.915628] ------------[ cut here ]------------
[  234.915640] WARNING: CPU: 0 PID: 1502 at drivers/media/mc/mc-entity.c:669 media_create_pad_link+0x1e0/0x200 [mc]
[  234.915641] Modules linked in: si2157 lgdt3306a cx231xx_dvb(+) dvb_core cx231xx_alsa cx25840 cx231xx tveeprom cx2341x i2c_mux videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc ir_rc5_decoder rc_hauppauge mceusb rc_core edac_mce_amd kvm nls_iso8859
_1 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper efi_pstore wmi_bmof k10temp asix usbnet mii nouveau snd_hda_codec_realtek snd_hda_codec_generic input_leds ledtrig_audio snd_hda_codec_hdmi mxm_wmi snd_hda_intel video snd_intel_dspcf
g ttm snd_hda_codec drm_kms_helper snd_hda_core drm snd_hwdep snd_seq_midi snd_seq_midi_event i2c_algo_bit snd_pcm snd_rawmidi fb_sys_fops snd_seq syscopyarea sysfillrect snd_seq_device sysimgblt snd_timer snd soundcore ccp mac_hid sch_fq_codel parport_pc ppdev lp parport ip_tab
les x_tables autofs4 vfio_pci irqbypass vfio_virqfd vfio_iommu_type1 vfio hid_generic usbhid hid i2c_piix4 ahci libahci wmi gpio_amdpt gpio_generic
[  234.915700] CPU: 0 PID: 1502 Comm: modprobe Not tainted 5.7.0-rc2+ #181
[  234.915702] Hardware name: MSI MS-7A39/B350M GAMING PRO (MS-7A39), BIOS 2.G0 04/27/2018
[  234.915709] RIP: 0010:media_create_pad_link+0x1e0/0x200 [mc]
[  234.915712] Code: 26 fd ff ff 44 8b 4d d0 eb d9 0f 0b 41 b9 ea ff ff ff 44 89 c8 c3 0f 0b 41 b9 ea ff ff ff eb f2 0f 0b 41 b9 ea ff ff ff eb e8 <0f> 0b 41 b9 ea ff ff ff eb af 0f 0b 41 b9 ea ff ff ff eb a5 66 90
[  234.915714] RSP: 0018:ffffb9ecc1b6fa50 EFLAGS: 00010246
[  234.915717] RAX: ffff943f8c94a9d8 RBX: 0000000000000000 RCX: 0000000000000000
[  234.915719] RDX: ffff943f613e0900 RSI: 0000000000000000 RDI: ffff943f8c94a958
[  234.915721] RBP: ffffb9ecc1b6fa88 R08: 0000000000000001 R09: ffff943f613e0900
[  234.915723] R10: ffff943f613e0900 R11: ffff943f6b590c00 R12: 0000000000000000
[  234.915724] R13: 0000000000000001 R14: ffff943f8c94a958 R15: 0000000000000001
[  234.915727] FS:  00007f4ca3646540(0000) GS:ffff943f8ec00000(0000) knlGS:0000000000000000
[  234.915729] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  234.915731] CR2: 00007fff7a53ba18 CR3: 00000003da614000 CR4: 00000000003406f0
[  234.915733] Call Trace:
[  234.915745]  media_create_pad_links+0x104/0x1b0 [mc]
[  234.915756]  dvb_create_media_graph+0x350/0x5f0 [dvb_core]
[  234.915766]  dvb_init.part.4+0x691/0x1360 [cx231xx_dvb]
[  234.915780]  dvb_init+0x1a/0x20 [cx231xx_dvb]
[  234.915787]  cx231xx_register_extension+0x71/0xa0 [cx231xx]
[  234.915791]  ? 0xffffffffc042f000
[  234.915796]  cx231xx_dvb_register+0x15/0x1000 [cx231xx_dvb]
[  234.915802]  do_one_initcall+0x71/0x250
[  234.915807]  ? do_init_module+0x27/0x22e
[  234.915811]  ? _cond_resched+0x1a/0x50
[  234.915816]  ? kmem_cache_alloc_trace+0x1ec/0x270
[  234.915820]  ? __vunmap+0x1e3/0x240
[  234.915826]  do_init_module+0x5f/0x22e
[  234.915831]  load_module+0x2525/0x2d40
[  234.915848]  __do_sys_finit_module+0xe5/0x120
[  234.915850]  ? __do_sys_finit_module+0xe5/0x120
[  234.915862]  __x64_sys_finit_module+0x1a/0x20
[  234.915865]  do_syscall_64+0x57/0x1b0
[  234.915870]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  234.915872] RIP: 0033:0x7f4ca3168839
[  234.915876] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48
[  234.915878] RSP: 002b:00007ffcea3db3b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[  234.915881] RAX: ffffffffffffffda RBX: 000055af22c29340 RCX: 00007f4ca3168839
[  234.915882] RDX: 0000000000000000 RSI: 000055af22c38390 RDI: 0000000000000001
[  234.915884] RBP: 000055af22c38390 R08: 0000000000000000 R09: 0000000000000000
[  234.915885] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000000
[  234.915887] R13: 000055af22c29060 R14: 0000000000040000 R15: 0000000000000000
[  234.915896] ---[ end trace a60f19c54aa96ec3 ]---

Signed-off-by: Brad Love <brad@nextdimension.cc>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-05-25 09:09:05 +02:00
Mauro Carvalho Chehab
10713a9420 media: Kconfig: move DVB-specific options to dvb-core/Kconfig
In order to cleanup the main media Kconfig, move the DVB-core
specific options to dvb-core/Kconfig.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-04-14 10:29:05 +02:00
Mauro Carvalho Chehab
e58be01614 media: dvb-core: Kconfig: default to use dynamic minors
All modern Linux distributions nowadays use udev or some
alternative (like systemd). So, it makes sense to change
the default to use dynamic minors.

Please notice that this default doesn't enable any code.
It just changes the dvb-core behavior.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-04-14 10:29:05 +02:00
Wolfram Sang
d928440cf4 media: dvb-core: dvbdev: convert to use i2c_new_client_device()
Use the newer API returning an ERRPTR and use the new helper to bail
out.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-01-09 15:57:46 +01:00
Johann Friedrichs
000e675182 media: dvb-core: Fix receiving invalid EIT-sections
Resetting buf without resetting pusi_seen at a channel-switch can lead
to copying the rest of a section to the start of buf, but treating it as
a complete section, when the next pusi arrives.
EIT-sections starting without valid header were randomly received during
an EIT-scan on a transponder.

Signed-off-by: Johann Friedrichs <johann.friedrichs@web.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-01-08 11:46:34 +01:00
Wenwen Wang
fcd5ce4b39 media: dvb-core: fix a memory leak bug
In dvb_create_media_entity(), 'dvbdev->entity' is allocated through
kzalloc(). Then, 'dvbdev->pads' is allocated through kcalloc(). However, if
kcalloc() fails, the allocated 'dvbdev->entity' is not deallocated, leading
to a memory leak bug. To fix this issue, free 'dvbdev->entity' before
returning -ENOMEM.

Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-21 18:39:54 -03:00
Fuqian Huang
f6af820ef1 media: media/dvb: Use kmemdup rather than duplicating its implementation
kmemdup is introduced to duplicate a region of memory in a neat way.
Rather than kmalloc/kzalloc + memcpy, which the programmer needs to
write the size twice (sometimes lead to mistakes), kmemdup improves
readability, leads to smaller code and also reduce the chances of mistakes.
Suggestion to use kmemdup rather than using kmalloc/kzalloc + memcpy.

Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-14 05:03:30 -03:00
Arnd Bergmann
14e3cdbb00 media: don't drop front-end reference count for ->detach
A bugfix introduce a link failure in configurations without CONFIG_MODULES:

In file included from drivers/media/usb/dvb-usb/pctv452e.c:20:0:
drivers/media/usb/dvb-usb/pctv452e.c: In function 'pctv452e_frontend_attach':
drivers/media/dvb-frontends/stb0899_drv.h:151:36: error: weak declaration of 'stb0899_attach' being applied to a already existing, static definition

The problem is that the !IS_REACHABLE() declaration of stb0899_attach()
is a 'static inline' definition that clashes with the weak definition.

I further observed that the bugfix was only done for one of the five users
of stb0899_attach(), the other four still have the problem.  This reverts
the bugfix and instead addresses the problem by not dropping the reference
count when calling '->detach()', instead we call this function directly
in dvb_frontend_put() before dropping the kref on the front-end.

I first submitted this in early 2018, and after some discussion it
was apparently discarded.  While there is a long-term plan in place,
that plan is obviously not nearing completion yet, and the current
kernel is still broken unless this patch is applied.

Link: https://patchwork.kernel.org/patch/10140175/
Link: https://patchwork.linuxtv.org/patch/54831/

Cc: Max Kellermann <max.kellermann@gmail.com>
Cc: Wolfgang Rohdewald <wolfgang@rohdewald.de>
Cc: stable@vger.kernel.org
Fixes: f686c14364 ("[media] stb0899: move code to "detach" callback")
Fixes: 6cdeaed3b1 ("media: dvb_usb_pctv452e: module refcount changes were unbalanced")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-04 06:33:11 -03:00
Arnd Bergmann
15a98fb2fc media: dvb_frontend: split dvb_frontend_handle_ioctl function
Over time, dvb_frontend_handle_ioctl() has grown to the point where
we now get a warning from the compiler about excessive stack usage:

drivers/media/dvb-core/dvb_frontend.c: In function 'dvb_frontend_handle_ioctl':
drivers/media/dvb-core/dvb_frontend.c:2692:1: error: the frame size of 1048 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]

Almost all of this is used by the dtv_frontend_properties structure
in the FE_GET_PROPERTY and FE_GET_FRONTEND commands. Splitting those
into separate function reduces the stack usage of the main function
to just 136 bytes, the others are under 500 each.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-27 07:24:12 -04:00
Mauro Carvalho Chehab
882f261874 Linux 5.2-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl0Gj1MeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGctkH/0At3+SQPY2JJSy8
 i6+TDeytFx9OggeGLPHChRfehkAlvMb/kd34QHnuEvDqUuCAMU6HZQJFKoK9mvFI
 sDJVayPGDSqpm+iv8qLpMBPShiCXYVnGZeVfOdv36jUswL0k6wHV1pz4avFkDeZa
 1F4pmI6O2XRkNTYQawbUaFkAngWUCBG9ECLnHJnuIY6ohShBvjI4+E2JUaht+8gO
 M2h2b9ieddWmjxV3LTKgsK1v+347RljxdZTWnJ62SCDSEVZvsgSA9W2wnebVhBkJ
 drSmrFLxNiM+W45mkbUFmQixRSmjv++oRR096fxAnodBxMw0TDxE1RiMQWE6rVvG
 N6MC6xA=
 =+B0P
 -----END PGP SIGNATURE-----

Merge tag 'v5.2-rc5' into patchwork

Linux 5.2-rc5

There are some media fixes on -rc5, so merge from it at media
devel tree.

* tag 'v5.2-rc5': (210 commits)
  Linux 5.2-rc5
  x86/microcode, cpuhotplug: Add a microcode loader CPU hotplug callback
  Smack: Restore the smackfsdef mount option and add missing prefixes
  ftrace: Fix NULL pointer dereference in free_ftrace_func_mapper()
  module: Fix livepatch/ftrace module text permissions race
  tracing/uprobe: Fix obsolete comment on trace_uprobe_create()
  tracing/uprobe: Fix NULL pointer dereference in trace_uprobe_create()
  tracing: Make two symbols static
  tracing: avoid build warning with HAVE_NOP_MCOUNT
  tracing: Fix out-of-range read in trace_stack_print()
  gfs2: Fix rounding error in gfs2_iomap_page_prepare
  x86/kasan: Fix boot with 5-level paging and KASAN
  timekeeping: Repair ktime_get_coarse*() granularity
  Revert "ALSA: hda/realtek - Improve the headset mic for Acer Aspire laptops"
  mm/devm_memremap_pages: fix final page put race
  PCI/P2PDMA: track pgmap references per resource, not globally
  lib/genalloc: introduce chunk owners
  PCI/P2PDMA: fix the gen_pool_add_virt() failure path
  mm/devm_memremap_pages: introduce devm_memunmap_pages
  drivers/base/devres: introduce devm_release_action()
  ...
2019-06-21 16:09:25 -04:00
Linus Torvalds
35110e38e6 media updates for v5.2-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAl0BHk0ACgkQCF8+vY7k
 4RVWGhAAgiIE//uW0cTeQrxwA9BRwFgdOle6gsV9vaTNtBKHhvCdI0uhkqmx357y
 rdkTESoXpYruMMHZvfg0dntifKCI+OI8lpooaoqCEjjbiW77ylqdnqovnKUfcDdi
 Da7EDXFA6YXkWx1g1kssK7vnSO4yAl3zavAr8Mw+sKS2jr0WTB3CuIZgF362P9qa
 6rZnpiJEhFxNJDkandc31m3+EuxdHcSaJIiJfMXQk7ZmLK0+QyYI22M4Xvgz+YAG
 Oe7khrs8s1j6Rb8waxCK5ip0JMboFxRqnrM5dDVPTpW+t8iuLPoutzW/GJ3/hHNV
 9o0I6hbLP8jc1m3hk37jY+sileT/IPXfLVEFaG/9Dw78rxC3g8iu2WKa9tIN6/Ng
 epd7YRRm/cfq0fy/+noLUP9PgHIdBF+/uLo+QIN/dWv35n9GSgu+ozvDu+WDDGKT
 DG5Gvo2BTgAl3rtHt5jPx5OTmUXRO4UH3b64xV5+7SWf46Hi7jRfqgDol93t4IsW
 7lKq15yKXBoeY7wxfDJ2+CKeQpsL2UlfA2PO2Ar5028RMbYAOJRU8cdr/6ijOJn0
 /SfPpU1cdIiLZkjwJs/DFRy2k5Np53OXgLSMgResfJPiB3vO7hN7kXRsLeHFEzfk
 DItmf4L+I7aJj7N+Bhyg5tCAaNZ2Tl8Azw6SUxkUAfNh3IgGPj4=
 =UXan
 -----END PGP SIGNATURE-----

Merge tag 'media/v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:

 - a debug warning for satellite tuning at dvb core was producing too
   much noise

 - a regression at hfi_parser on Venus driver

* tag 'media/v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: venus: hfi_parser: fix a regression in parser
  media: dvb: warning about dvb frequency limits produces too much noise
2019-06-12 05:57:05 -10:00
Mauro Carvalho Chehab
1e0566fd4a Linux 5.2-rc2
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlzrJgUeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1XAIAJajJpeKc9MVQipi
 zWiI+WgHDg8gG/HnLKzP2Zp4MUjTCz30t0rnBbdo6AyK6LnPBL53yxg9q64XN7vI
 p/h2ys+/DvqhIYSPWX6C++HYQT4Cb5ghxJABEIsztd3G4nfB9L2vgq9zKSNFusTD
 UtfUxufciZPX515TuE4IqWMwS4Ut5daH7V3jjZunhPiayTFv64e1KbpKLLzHR0NR
 DfFbrPcdp7VyCT/A5AKrqfqeB6O9dm/Fe4CsdsaKuzASCXJ6GUc/A7iZDndv/KA4
 f5Xh7SGlQ2TfT1ud/aMfdw3AcMjqB8zgMJenovJ7UuHDfULBWNeAmMh/cTDwY9eY
 Xgyvfm0=
 =S8p9
 -----END PGP SIGNATURE-----

Merge tag 'v5.2-rc2' into patchwork

Merge back from upstream into media tree, as there are some
patches merged upstream that has pontential of causing
conflicts (one actually rised a conflict already).

Linux 5.2-rc2

* tag 'v5.2-rc2': (377 commits)
  Linux 5.2-rc2
  random: fix soft lockup when trying to read from an uninitialized blocking pool
  tracing: Silence GCC 9 array bounds warning
  ext4: fix dcache lookup of !casefolded directories
  locking/lock_events: Use this_cpu_add() when necessary
  KVM: x86: fix return value for reserved EFER
  tools/kvm_stat: fix fields filter for child events
  KVM: selftests: Wrap vcpu_nested_state_get/set functions with x86 guard
  kvm: selftests: aarch64: compile with warnings on
  kvm: selftests: aarch64: fix default vm mode
  kvm: selftests: aarch64: dirty_log_test: fix unaligned memslot size
  KVM: s390: fix memory slot handling for KVM_SET_USER_MEMORY_REGION
  KVM: x86/pmu: do not mask the value that is written to fixed PMUs
  KVM: x86/pmu: mask the result of rdpmc according to the width of the counters
  x86/kvm/pmu: Set AMD's virt PMU version to 1
  KVM: x86: do not spam dmesg with VMCS/VMCB dumps
  kvm: Check irqchip mode before assign irqfd
  kvm: svm/avic: fix off-by-one in checking host APIC ID
  KVM: selftests: do not blindly clobber registers in guest asm
  KVM: selftests: Remove duplicated TEST_ASSERT in hyperv_cpuid.c
  ...
2019-05-28 11:21:51 -04:00
Thomas Gleixner
a0c7056fda treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 113
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details to
  obtain the license point your browser to http www gnu org copyleft
  gpl html

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 26 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190523091650.572604764@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24 17:39:01 +02:00
Bartlomiej Zolnierkiewicz
2f39cce963 media: remove redundant 'default n' from Kconfig-s
'default n' is the default value for any bool or tristate Kconfig
setting so there is no need to write it explicitly.

Also since commit f467c5640c ("kconfig: only write '# CONFIG_FOO
is not set' for visible symbols") the Kconfig behavior is the same
regardless of 'default n' being present or not:

    ...
    One side effect of (and the main motivation for) this change is making
    the following two definitions behave exactly the same:

        config FOO
                bool

        config FOO
                bool
                default n

    With this change, neither of these will generate a
    '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied).
    That might make it clearer to people that a bare 'default n' is
    redundant.
    ...

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-24 08:36:45 -04:00
Sean Young
eb96e57b91 media: dvb: warning about dvb frequency limits produces too much noise
This can be a debug message. Favour dev_dbg() over dprintk() as this is
already used much more than dprintk().

dvb_frontend: dvb_frontend_get_frequency_limits: frequency interval: tuner: 45000000...860000000, frontend: 44250000...867250000

Fixes: 00ecd6bc71 ("media: dvb_frontend: add debug message for frequency intervals")

Cc: <stable@vger.kernel.org> # 5.0
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-22 15:32:08 -04:00
Thomas Gleixner
ec8f24b7fa treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:46 +02:00
Mauro Carvalho Chehab
122d0e8dd0 media: dvbdev: remove double-unlock
As warned by smatch:
	drivers/media/dvb-core/dvbdev.c: drivers/media/dvb-core/dvbdev.c:529 dvb_register_device() error: double unlock 'sem:&minor_rwsem'

Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-03-28 14:36:14 -04:00
Mauro Carvalho Chehab
7808239d8e media: dvb-core: fix several typos
Use codespell to fix lots of typos over frontends.

Manually verified to avoid false-positives.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-03-01 09:28:08 -05:00
Hans Verkuil
c6f5c7c237 media: dvb-core: fix epoll() by calling poll_wait first
The epoll function expects that whenever the poll file op is
called, the poll_wait function is also called. That didn't
always happen in dvb_demux_poll(), dvb_dvr_poll() and
dvb_ca_en50221_io_poll(). Fix this, otherwise epoll()
can timeout when it shouldn't.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18 14:48:37 -05:00
Mauro Carvalho Chehab
00ecd6bc71 media: dvb_frontend: add debug message for frequency intervals
As we did an internal change inside the subsystem to always
represent min/max frequencies in Hz, add a debug message, as this
would help to discover bugs on drivers, if any.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23 11:59:45 -05:00
Mauro Carvalho Chehab
807b8675a6 media: dvb_frontend: don't print function names twice
The dvb_frontend dprintk() macro already prints __func__. So,
we don't need to add it again at the printed message.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23 11:59:22 -05:00
Linus Torvalds
b3491d8430 media updates for v4.20-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJb2F9AAAoJEAhfPr2O5OEVm5YP/Ak53aAEI1oJNequwdTYKc+/
 2xWRpYWREa1g+x4MlqWO+szlPWbGXCUVwye8ii2N/xihLapsKVrLCr/dDd5khsvw
 bDux33BzpU3Ug/ncQKD6ZZv4vVRzG8DMPcpkOwSs0OoboJns6AkHVGCugR32qZsH
 3SH/r1aJce0oK1rrzgbYYZHTvaPshvY2IOLPKrtFmO+73iCVRhpSdWjFsY+q2Alp
 +3Ho/06iQYB2i+enXrwoIKHAYoXArXYbxS2dhaNz+NURrOAytmgfMisvvt67heHx
 IEilE0AcSjjlN/eyOxp+WCZrg9JLXVzZLX6ZnqqM2OEu1AS/XBultJBsGaN0hOiV
 dir2enoHNNOStI40hNSdbumg9I0Txmag2jtpaGyaBnnGmGRJ/JIYegCPRVMLygAf
 HHFHjR4fnRnqZrlh9OGAHaqc9RNlUgFVdlyqFtdyIah+aNeuij3o69mWM35QMLhw
 /0dTXBUXw9aD1dEg1cZ6PdzLWJgDd7n1gIdfzzzzLnzmBwmmhqxW8+evu9qSAXsP
 rnEZuE77HYKVfiacWMwpZK6+lT51STAE8ouo3N8fmaC+4RQmpq0dYXtR8RnlcSUD
 hKpJ6UsIIb5A6xKX7ed8x6FxV14TEEaa042A4eclxsAFiqqkNfWSozqV0vfW5vCD
 2lrsuN3knpfh7XDBSr0y
 =V4X4
 -----END PGP SIGNATURE-----

Merge tag 'media/v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull new experimental media request API from Mauro Carvalho Chehab:
 "A new media request API

  This API is needed to support device drivers that can dynamically
  change their parameters for each new frame. The latest versions of
  Google camera and codec HAL depends on such feature.

  At this stage, it supports only stateless codecs.

  It has been discussed for a long time (at least over the last 3-4
  years), and we finally reached to something that seem to work.

  This series contain both the API and core changes required to support
  it and a new m2m decoder driver (cedrus).

  As the current API is still experimental, the only real driver using
  it (cedrus) was added at staging[1]. We intend to keep it there for a
  while, in order to test the API. Only when we're sure that this API
  works for other cases (like encoders), we'll move this driver out of
  staging and set the API into a stone.

  [1] We added support for the vivid virtual driver (used only for
  testing) to it too, as it makes easier to test the API for the ones
  that don't have the cedrus hardware"

* tag 'media/v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (53 commits)
  media: dt-bindings: Document the Rockchip VPU bindings
  media: platform: Add Cedrus VPU decoder driver
  media: dt-bindings: media: Document bindings for the Cedrus VPU driver
  media: v4l: Add definition for the Sunxi tiled NV12 format
  media: v4l: Add definitions for MPEG-2 slice format and metadata
  media: videobuf2-core: Rework and rename helper for request buffer count
  media: v4l2-ctrls.c: initialize an error return code with zero
  media: v4l2-compat-ioctl32.c: add missing documentation for a field
  media: media-request: update documentation
  media: media-request: EPERM -> EACCES/EBUSY
  media: v4l2-ctrls: improve media_request_(un)lock_for_update
  media: v4l2-ctrls: use media_request_(un)lock_for_access
  media: media-request: add media_request_(un)lock_for_access
  media: vb2: set reqbufs/create_bufs capabilities
  media: videodev2.h: add new capabilities for buffer types
  media: buffer.rst: only set V4L2_BUF_FLAG_REQUEST_FD for QBUF
  media: v4l2-ctrls: return -EACCES if request wasn't completed
  media: media-request: return -EINVAL for invalid request_fds
  media: vivid: add request support
  media: vivid: add mc
  ...
2018-10-31 10:53:29 -07:00
Mauro Carvalho Chehab
f3efe15a2f media: dvb: use signal types to discover pads
On tuner pads, multiple signals are present. Be sure to get
the right PAD by using them.

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-17 13:16:19 -04:00
Arnd Bergmann
b5d3206112 media: dvb: dmxdev: move compat_ioctl handling to dmxdev.c
All dmx ioctls are compatible, and they are only implemented
in one file, so we can replace the list of commands in
fs/compat_ioctl.c with a single line in dmxdev.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-12 11:00:51 -04:00
Mauro Carvalho Chehab
cc1e6315e8 media: replace strcpy() by strscpy()
The strcpy() function is being deprecated upstream. Replace
it by the safer strscpy().

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11 13:32:17 -04:00
Mauro Carvalho Chehab
c0decac19d media: use strscpy() instead of strlcpy()
The implementation of strscpy() is more robust and safer.

That's now the recommended way to copy NUL terminated strings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11 13:32:17 -04:00
Hans Verkuil
fd89e0bb6e media: videobuf2-core: integrate with media requests
Buffers can now be prepared or queued for a request.

A buffer is unbound from the request at vb2_buffer_done time or
when the queue is cancelled.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31 11:18:35 -04:00
Hans Verkuil
db6e8d57e2 media: vb2: store userspace data in vb2_v4l2_buffer
The userspace-provided plane data needs to be stored in
vb2_v4l2_buffer. Currently this information is applied by
__fill_vb2_buffer() which is called by the core prepare_buf
and qbuf functions, but when using requests these functions
aren't called yet since the buffer won't be prepared until
the media request is actually queued.

In the meantime this information has to be stored somewhere
and vb2_v4l2_buffer is a good place for it.

The __fill_vb2_buffer callback now just copies the relevant
information from vb2_v4l2_buffer into the planes array.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31 11:14:44 -04:00
Mauro Carvalho Chehab
6a2a1ca34c media: dvb_frontend: ensure that the step is ok for both FE and tuner
The frequency step should take into account the tuner step,
as, if tuner step is bigger than frontend step, the zigzag
algorithm won't be doing the right thing, as it will be
tuning multiple times at the same frequency.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02 18:11:46 -04:00
Mauro Carvalho Chehab
f1b1eabff0 media: dvb: represent min/max/step/tolerance freqs in Hz
Right now, satellite frontend drivers specify frequencies in kHz,
while terrestrial/cable ones specify in Hz. That's confusing
for developers.

However, the main problem is that universal frontends capable
of handling both satellite and non-satelite delivery systems
are appearing. We end by needing to hack the drivers in
order to support such hybrid frontends.

So, convert everything to specify frontend frequencies in Hz.

Tested-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02 18:10:48 -04:00
Mauro Carvalho Chehab
a3f90c75b8 media: dvb: convert tuner_info frequencies to Hz
Right now, satellite tuner drivers specify frequencies in kHz,
while terrestrial/cable ones specify in Hz. That's confusing
for developers.

However, the main problem is that universal tuners capable
of handling both satellite and non-satelite delivery systems
are appearing. We end by needing to hack the drivers in
order to support such hybrid tuners.

So, convert everything to specify tuner frequencies in Hz.

Plese notice that a similar patch is also needed for frontends.

Tested-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Acked-by: Michael Büsch <m@bues.ch>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02 16:14:50 -04:00
Dan Carpenter
6706fe55af media: dvb_ca_en50221: off by one in dvb_ca_en50221_io_do_ioctl()
The > should be >= so we don't read one element beyond the end of the
ca->slot_info[] array.  The array is allocated in dvb_ca_en50221_init().

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jasmin Jessich <jasmin@anw.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02 14:21:39 -04:00
Hans Verkuil
4d1e4545a6 media: mark entity-intf links as IMMUTABLE
Currently links between entities and an interface are just marked as
ENABLED. But (at least today) these links cannot be disabled by userspace
or the driver, so they should also be marked as IMMUTABLE.

It might become possible that drivers can disable such links (if for some
reason the device node cannot be used), so we might need to add a new link
flag at some point to mark interface links that can be changed by the driver
but not by userspace.

Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-04 08:40:49 -04:00
Mauro Carvalho Chehab
5fb94e9ca3 docs: Fix some broken references
As we move stuff around, some doc references are broken. Fix some of
them via this script:
	./scripts/documentation-file-ref-check --fix

Manually checked if the produced result is valid, removing a few
false-positives.

Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
2018-06-15 18:10:01 -03:00
Kees Cook
42bc47b353 treewide: Use array_size() in vmalloc()
The vmalloc() function has no 2-factor argument form, so multiplication
factors need to be wrapped in array_size(). This patch replaces cases of:

        vmalloc(a * b)

with:
        vmalloc(array_size(a, b))

as well as handling cases of:

        vmalloc(a * b * c)

with:

        vmalloc(array3_size(a, b, c))

This does, however, attempt to ignore constant size factors like:

        vmalloc(4 * 1024)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  vmalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  vmalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  vmalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  vmalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  vmalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  vmalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  vmalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  vmalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  vmalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  vmalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
  vmalloc(
-	sizeof(TYPE) * (COUNT_ID)
+	array_size(COUNT_ID, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(TYPE) * COUNT_ID
+	array_size(COUNT_ID, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(TYPE) * (COUNT_CONST)
+	array_size(COUNT_CONST, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(TYPE) * COUNT_CONST
+	array_size(COUNT_CONST, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(THING) * (COUNT_ID)
+	array_size(COUNT_ID, sizeof(THING))
  , ...)
|
  vmalloc(
-	sizeof(THING) * COUNT_ID
+	array_size(COUNT_ID, sizeof(THING))
  , ...)
|
  vmalloc(
-	sizeof(THING) * (COUNT_CONST)
+	array_size(COUNT_CONST, sizeof(THING))
  , ...)
|
  vmalloc(
-	sizeof(THING) * COUNT_CONST
+	array_size(COUNT_CONST, sizeof(THING))
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

  vmalloc(
-	SIZE * COUNT
+	array_size(COUNT, SIZE)
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  vmalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  vmalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  vmalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  vmalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  vmalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  vmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  vmalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  vmalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  vmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  vmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  vmalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vmalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vmalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vmalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vmalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vmalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vmalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vmalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  vmalloc(C1 * C2 * C3, ...)
|
  vmalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants.
@@
expression E1, E2;
constant C1, C2;
@@

(
  vmalloc(C1 * C2, ...)
|
  vmalloc(
-	E1 * E2
+	array_size(E1, E2)
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 16:19:22 -07:00
Mauro Carvalho Chehab
4f5ab5d7a5 media: dvb_ca_en50221: prevent using slot_info for Spectre attacs
slot can be controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability,
as warned by smatch:
	drivers/media/dvb-core/dvb_ca_en50221.c:1479 dvb_ca_en50221_io_write() warn: potential spectre issue 'ca->slot_info' (local cap)

Acked-by: "Jasmin J." <jasmin@anw.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-16 10:17:22 -04:00
Mauro Carvalho Chehab
09c2cc98cd media: dvb_frontend: cleanup some coding style errors
This is a core media file... it shoudn't have so many coding
style issues! The last patch ended by being submitted with
an error like that, very likely due to some cut and paste
issue.

Maybe it is time to clean it up. Do it with the auto
fix logic:

 ./scripts/checkpatch.pl -f drivers/media/dvb-core/dvb_frontend.c --strict --fix-inplace

Then manually fix the errors introduced by it.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-11 12:37:03 -04:00
Max Kellermann
f17c403af9 media: dvbdev: add a mutex protecting the "mdev" pointer
During destruction, a race condition in
dvb_media_controller_disable_source() can cause a kernel crash,
because the "mdev" pointer has been read successfully while another
task executes dvb_usb_media_device_unregister(), which destroys the
object.  Example for such a crash:

    general protection fault: 0000 [#1] SMP
    CPU: 1 PID: 301 Comm: vdr Not tainted 4.8.1-nuc+ #102
    [142B blob data]
    task: ffff8802301f2040 task.stack: ffff880233728000
    RIP: 0010:[<ffffffff816c296b>]  [<ffffffff816c296b>] dvb_frontend_release+0xcb/0x120
    RSP: 0018:ffff88023372bdd8  EFLAGS: 00010202
    RAX: 001fd55c000000da RBX: ffff880236bad810 RCX: 0000000000000000
    RDX: ffff880235bd81f0 RSI: 0000000000000246 RDI: ffff880235bd81e8
    RBP: ffff88023372be00 R08: 0000000000000000 R09: 0000000000000000
    R10: 0000000000000000 R11: ffff88022f009910 R12: 0000000000000000
    R13: ffff880235a21a80 R14: ffff880235bd8000 R15: ffff880235bb8a78
    FS:  0000000000000000(0000) GS:ffff88023fd00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 00007f96edd69818 CR3: 0000000002406000 CR4: 00000000001006e0
    Stack:
     ffff88022f009900 0000000000000008 ffff880235bb8a78 ffff8802344fbb20
     ffff880236437b40 ffff88023372be48 ffffffff8117a81e ffff880235bb8a78
     ffff88022f009910 ffff8802335a7400 ffff8802301f2040 ffff88022f009900
    Call Trace:
     [<ffffffff8117a81e>] __fput+0xde/0x1d0
     [<ffffffff8117a949>] ____fput+0x9/0x10
     [<ffffffff810a9fce>] task_work_run+0x7e/0xa0
     [<ffffffff81094bab>] do_exit+0x27b/0xa50
     [<ffffffff810407e3>] ? __do_page_fault+0x1c3/0x430
     [<ffffffff81095402>] do_group_exit+0x42/0xb0
     [<ffffffff8109547f>] SyS_exit_group+0xf/0x10
     [<ffffffff8108bedb>] entry_SYSCALL_64_fastpath+0x13/0x8f
    Code: 31 c9 49 8d be e8 01 00 00 ba 01 00 00 00 be 03 00 00 00 e8 68 2d a0 ff 48 8b 83 10 03 00 00 48 8b 80 88 00 00 00 48 85 c0 74 12 <48> 8b 80 88 02 00 00 48 85 c0 74 06 49 8b 7d
    RIP  [<ffffffff816c296b>] dvb_frontend_release+0xcb/0x120

[mchehab+samsung@kernel.org: fix a Coding Style issue]
Signed-off-by: Max Kellermann <max.kellermann@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-11 12:09:59 -04:00
Jasmin Jessich
dde67d50ef media: Revert cleanup ktime_set() usage
This reverts 8b0e195314, because media-tree drivers should use the
API functions to initialize variables of type ktime_t.

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jasmin Jessich <jasmin@anw.at>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-09 16:31:06 -04:00
Luc Van Oostenryck
245c189dc9 media: dvb_net: fix dvb_net_tx()'s return type
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, but the implementation in this
driver returns an 'int'.

Fix this by returning 'netdev_tx_t' in this driver too.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-05 10:21:40 -04:00
Akihiro Tsukada
a28a63b2b2 media: dvb-core/dvb_frontend: set better default for ISDB-T
DTV_ISDBT_LAYER_ENABLED parameter should be set to "All" by default,
instead of "None", as described in the API document.

Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 14:44:04 -04:00
Mauro Carvalho Chehab
76d81243a4 media: dvb_frontend: fix locking issues at dvb_frontend_get_event()
As warned by smatch:
	drivers/media/dvb-core/dvb_frontend.c:314 dvb_frontend_get_event() warn: inconsistent returns 'sem:&fepriv->sem'.
	  Locked on:   line 288
	               line 295
	               line 306
	               line 314
	  Unlocked on: line 303

The lock implementation for get event is wrong, as, if an
interrupt occurs, down_interruptible() will fail, and the
routine will call up() twice when userspace calls the ioctl
again.

The bad code is there since when Linux migrated to git, in
2005.

Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-17 05:49:58 -04:00
Katsuhiro Suzuki
5c6c9c4830 media: dvb_frontend: fix wrong cast in compat_ioctl
FE_GET_PROPERTY has always failed as following situations:
  - Use compatible ioctl
  - The array of 'struct dtv_property' has 2 or more items

This patch fixes wrong cast to a pointer 'struct dtv_property' from a
pointer of 2nd or after item of 'struct compat_dtv_property' array.

Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-04 06:27:28 -04:00
Mauro Carvalho Chehab
f44d6107f8 media: dvb_frontend: add proper __user annotations
Solves those warnings:
	drivers/media/dvb-core/dvb_frontend.c:2297:39: warning: incorrect type in argument 1 (different address spaces)
	drivers/media/dvb-core/dvb_frontend.c:2297:39:    expected void const [noderef] <asn:1>*<noident>
	drivers/media/dvb-core/dvb_frontend.c:2297:39:    got struct dtv_property *props
	drivers/media/dvb-core/dvb_frontend.c:2331:39: warning: incorrect type in argument 1 (different address spaces)
	drivers/media/dvb-core/dvb_frontend.c:2331:39:    expected void const [noderef] <asn:1>*<noident>
	drivers/media/dvb-core/dvb_frontend.c:2331:39:    got struct dtv_property *props

No functional changes.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-22 11:40:15 -04:00
Mauro Carvalho Chehab
39adb4e739 media: dvbdev: handle ENOMEM error at dvb_module_probe()
If allocation of struct board_info fails, return NULL from
dvb_module_probe().

Fix this warning:
	drivers/media/dvb-core/dvbdev.c:958 dvb_module_probe() error: potential null dereference 'board_info'.  (kzalloc returns null)

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-22 09:01:33 -04:00
Mauro Carvalho Chehab
1980bfa67f media: dvbdev: fix building on ia64
Not sure why, but, on ia64, with Linaro's gcc 7.3 compiler,
using #ifdef (CONFIG_I2C) is not OK.

So, replace it by IS_ENABLED(CONFIG_I2C), in order to fix the
builds there.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-07 04:11:50 -05:00
Daniel Scheller
1aebed3289 media: dvb_ca_en50221: fix severity of successful CAM init log message
A successful CA module initialisation isn't an error. Change the
log print to info severity accordingly.

Cc: Jasmin Jessich <jasmin@anw.at>
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 10:46:41 -05:00
Mauro Carvalho Chehab
8f569c0b4e media: dvb-core: add helper functions for I2C binding
The dvb_attach()/dvb_detach() methods are ugly hacks designed
to keep using the I2C low-level API. The proper way is to
do I2C bus bindings instead.

Several modules were already converted to use it. Yet,
it is painful to use it, as lots of code need to be
duplicated.

Make it easier by providing two new helper functions:
	- dvb_module_probe()
	- dvb_module_release()

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 05:00:31 -05:00