When exporting static_call_key; with EXPORT_STATIC_CALL*(), the module
can use static_call_update() to change the function called. This is
not desirable in general.
Not exporting static_call_key however also disallows usage of
static_call(), since objtool needs the key to construct the
static_call_site.
Solve this by allowing objtool to create the static_call_site using
the trampoline address when it builds a module and cannot find the
static_call_key symbol. The module loader will then try and map the
trampole back to a key before it constructs the normal sites list.
Doing this requires a trampoline -> key associsation, so add another
magic section that keeps those.
Originally-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20210127231837.ifddpn7rhwdaepiu@treble
I've always been bothered by the endless (fragile) boilerplate for
rbtree, and I recently wrote some rbtree helpers for objtool and
figured I should lift them into the kernel and use them more widely.
Provide:
partial-order; less() based:
- rb_add(): add a new entry to the rbtree
- rb_add_cached(): like rb_add(), but for a rb_root_cached
total-order; cmp() based:
- rb_find(): find an entry in an rbtree
- rb_find_add(): find an entry, and add if not found
- rb_find_first(): find the first (leftmost) matching entry
- rb_next_match(): continue from rb_find_first()
- rb_for_each(): iterate a sub-tree using the previous two
Inlining and constant propagation should see the compiler inline the
whole thing, including the various compare functions.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Michel Lespinasse <walken@google.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Thanks to a recent binutils change which doesn't generate unused
symbols, it's now possible for thunk_64.o be completely empty without
CONFIG_PREEMPTION: no text, no data, no symbols.
We could edit the Makefile to only build that file when
CONFIG_PREEMPTION is enabled, but that will likely create confusion
if/when the thunks end up getting used by some other code again.
Just ignore it and move on.
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1254
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
This is basically a revert of commit 644592d328 ("objtool: Fail the
kernel build on fatal errors").
That change turned out to be more trouble than it's worth. Failing the
build is an extreme measure which sometimes gets too much attention and
blocks CI build testing.
These fatal-type warnings aren't yet as rare as we'd hope, due to the
ever-increasing matrix of supported toolchains/plugins and their
fast-changing nature as of late.
Also, there are more people (and bots) looking for objtool warnings than
ever before, so even non-fatal warnings aren't likely to be ignored for
long.
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Building with the Clang assembler shows the following warning:
arch/x86/kernel/ftrace_64.o: warning: objtool: missing symbol for insn at offset 0x16
The Clang assembler strips section symbols. That ends up giving
objtool's find_func_containing() much more test coverage than normal.
Turns out, find_func_containing() doesn't work so well for overlapping
symbols:
2: 000000000000000e 0 NOTYPE LOCAL DEFAULT 2 fgraph_trace
3: 000000000000000f 0 NOTYPE LOCAL DEFAULT 2 trace
4: 0000000000000000 165 FUNC GLOBAL DEFAULT 2 __fentry__
5: 000000000000000e 0 NOTYPE GLOBAL DEFAULT 2 ftrace_stub
The zero-length NOTYPE symbols are inside __fentry__(), confusing the
rbtree search for any __fentry__() offset coming after a NOTYPE.
Try to avoid this problem by not adding zero-length symbols to the
rbtree. They're rare and aren't needed in the rbtree anyway.
One caveat, this actually might not end up being the right fix.
Non-empty overlapping symbols, if they exist, could have the same
problem. But that would need bigger changes, let's see if we can get
away with the easy fix for now.
Reported-by: Arnd Bergmann <arnd@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xfnP
-----END PGP SIGNATURE-----
Merge tag 'objtool-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Ingo Molnar:
"Fix a segfault that occurs when built with Clang"
* tag 'objtool-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix seg fault with Clang non-section symbols
The Clang assembler likes to strip section symbols, which means objtool
can't reference some text code by its section. This confuses objtool
greatly, causing it to seg fault.
The fix is similar to what was done before, for ORC reloc generation:
e81e072443 ("objtool: Support Clang non-section symbols in ORC generation")
Factor out that code into a common helper and use it for static call
reloc generation as well.
Reported-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://github.com/ClangBuiltLinux/linux/issues/1207
Link: https://lkml.kernel.org/r/ba6b6c0f0dd5acbba66e403955a967d9fdd1726a.1607983452.git.jpoimboe@redhat.com
Several Makefiles in tools/ need to define the host toolchain variables.
Move their definition to tools/scripts/Makefile.include
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/bpf/20201110164310.2600671-2-jean-philippe@linaro.org
- Most of the changes are cleanups and reorganization to make the objtool code
more arch-agnostic. This is in preparation for non-x86 support.
Fixes:
- KASAN fixes.
- Handle unreachable trap after call to noreturn functions better.
- Ignore unreachable fake jumps.
- Misc smaller fixes & cleanups.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KX5o
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2020-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
"Most of the changes are cleanups and reorganization to make the
objtool code more arch-agnostic. This is in preparation for non-x86
support.
Other changes:
- KASAN fixes
- Handle unreachable trap after call to noreturn functions better
- Ignore unreachable fake jumps
- Misc smaller fixes & cleanups"
* tag 'objtool-core-2020-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
perf build: Allow nested externs to enable BUILD_BUG() usage
objtool: Allow nested externs to enable BUILD_BUG()
objtool: Permit __kasan_check_{read,write} under UACCESS
objtool: Ignore unreachable trap after call to noreturn functions
objtool: Handle calling non-function symbols in other sections
objtool: Ignore unreachable fake jumps
objtool: Remove useless tests before save_reg()
objtool: Decode unwind hint register depending on architecture
objtool: Make unwind hint definitions available to other architectures
objtool: Only include valid definitions depending on source file type
objtool: Rename frame.h -> objtool.h
objtool: Refactor jump table code to support other architectures
objtool: Make relocation in alternative handling arch dependent
objtool: Abstract alternative special case handling
objtool: Move macros describing structures to arch-dependent code
objtool: Make sync-check consider the target architecture
objtool: Group headers to check in a single list
objtool: Define 'struct orc_entry' only when needed
objtool: Skip ORC entry creation for non-text sections
objtool: Move ORC logic out of check()
...
applied to indirect function calls. Remove a data load (indirection) by
modifying the text.
They give the flexibility of function pointers, but with better
performance. (This is especially important for cases where
retpolines would otherwise be used, as retpolines can be pretty
slow.)
API overview:
DECLARE_STATIC_CALL(name, func);
DEFINE_STATIC_CALL(name, func);
DEFINE_STATIC_CALL_NULL(name, typename);
static_call(name)(args...);
static_call_cond(name)(args...);
static_call_update(name, func);
x86 is supported via text patching, otherwise basic indirect calls are used,
with function pointers.
There's a second variant using inline code patching, inspired by jump-labels,
implemented on x86 as well.
The new APIs are utilized in the x86 perf code, a heavy user of function pointers,
where static calls speed up the PMU handler by 4.2% (!).
The generic implementation is not really excercised on other architectures,
outside of the trivial test_static_call_init() self-test.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=JvpF
-----END PGP SIGNATURE-----
Merge tag 'core-static_call-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull static call support from Ingo Molnar:
"This introduces static_call(), which is the idea of static_branch()
applied to indirect function calls. Remove a data load (indirection)
by modifying the text.
They give the flexibility of function pointers, but with better
performance. (This is especially important for cases where retpolines
would otherwise be used, as retpolines can be pretty slow.)
API overview:
DECLARE_STATIC_CALL(name, func);
DEFINE_STATIC_CALL(name, func);
DEFINE_STATIC_CALL_NULL(name, typename);
static_call(name)(args...);
static_call_cond(name)(args...);
static_call_update(name, func);
x86 is supported via text patching, otherwise basic indirect calls are
used, with function pointers.
There's a second variant using inline code patching, inspired by
jump-labels, implemented on x86 as well.
The new APIs are utilized in the x86 perf code, a heavy user of
function pointers, where static calls speed up the PMU handler by
4.2% (!).
The generic implementation is not really excercised on other
architectures, outside of the trivial test_static_call_init()
self-test"
* tag 'core-static_call-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
static_call: Fix return type of static_call_init
tracepoint: Fix out of sync data passing by static caller
tracepoint: Fix overly long tracepoint names
x86/perf, static_call: Optimize x86_pmu methods
tracepoint: Optimize using static_call()
static_call: Allow early init
static_call: Add some validation
static_call: Handle tail-calls
static_call: Add static_call_cond()
x86/alternatives: Teach text_poke_bp() to emulate RET
static_call: Add simple self-test for static calls
x86/static_call: Add inline static call implementation for x86-64
x86/static_call: Add out-of-line static call implementation
static_call: Avoid kprobes on inline static_call()s
static_call: Add inline static call infrastructure
static_call: Add basic static call infrastructure
compiler.h: Make __ADDRESSABLE() symbol truly unique
jump_label,module: Fix module lifetime for __jump_label_mod_text_reserved()
module: Properly propagate MODULE_STATE_COMING failure
module: Fix up module_notifier return values
...
- Add deadlock detection for recursive read-locks. The rationale is outlined
in:
224ec489d3: ("lockdep/Documention: Recursive read lock detection reasoning")
The main deadlock pattern we want to detect is:
TASK A: TASK B:
read_lock(X);
write_lock(X);
read_lock_2(X);
- Add "latch sequence counters" (seqcount_latch_t):
A sequence counter variant where the counter even/odd value is used to
switch between two copies of protected data. This allows the read path,
typically NMIs, to safely interrupt the write side critical section.
We utilize this new variant for sched-clock, and to make x86 TSC handling safer.
- Other seqlock cleanups, fixes and enhancements
- KCSAN updates
- LKMM updates
- Misc updates, cleanups and fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Iq51
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"These are the locking updates for v5.10:
- Add deadlock detection for recursive read-locks.
The rationale is outlined in commit 224ec489d3 ("lockdep/
Documention: Recursive read lock detection reasoning")
The main deadlock pattern we want to detect is:
TASK A: TASK B:
read_lock(X);
write_lock(X);
read_lock_2(X);
- Add "latch sequence counters" (seqcount_latch_t):
A sequence counter variant where the counter even/odd value is used
to switch between two copies of protected data. This allows the
read path, typically NMIs, to safely interrupt the write side
critical section.
We utilize this new variant for sched-clock, and to make x86 TSC
handling safer.
- Other seqlock cleanups, fixes and enhancements
- KCSAN updates
- LKMM updates
- Misc updates, cleanups and fixes"
* tag 'locking-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits)
lockdep: Revert "lockdep: Use raw_cpu_*() for per-cpu variables"
lockdep: Fix lockdep recursion
lockdep: Fix usage_traceoverflow
locking/atomics: Check atomic-arch-fallback.h too
locking/seqlock: Tweak DEFINE_SEQLOCK() kernel doc
lockdep: Optimize the memory usage of circular queue
seqlock: Unbreak lockdep
seqlock: PREEMPT_RT: Do not starve seqlock_t writers
seqlock: seqcount_LOCKNAME_t: Introduce PREEMPT_RT support
seqlock: seqcount_t: Implement all read APIs as statement expressions
seqlock: Use unique prefix for seqcount_t property accessors
seqlock: seqcount_LOCKNAME_t: Standardize naming convention
seqlock: seqcount latch APIs: Only allow seqcount_latch_t
rbtree_latch: Use seqcount_latch_t
x86/tsc: Use seqcount_latch_t
timekeeping: Use seqcount_latch_t
time/sched_clock: Use seqcount_latch_t
seqlock: Introduce seqcount_latch_t
mm/swap: Do not abuse the seqcount_t latching API
time/sched_clock: Use raw_read_seqcount_latch() during suspend
...
encounter an MCE in kernel space but while copying from user memory by
sending them a SIGBUS on return to user space and umapping the faulty
memory, by Tony Luck and Youquan Song.
* memcpy_mcsafe() rework by splitting the functionality into
copy_mc_to_user() and copy_mc_to_kernel(). This, as a result, enables
support for new hardware which can recover from a machine check
encountered during a fast string copy and makes that the default and
lets the older hardware which does not support that advance recovery,
opt in to use the old, fragile, slow variant, by Dan Williams.
* New AMD hw enablement, by Yazen Ghannam and Akshay Gupta.
* Do not use MSR-tracing accessors in #MC context and flag any fault
while accessing MCA architectural MSRs as an architectural violation
with the hope that such hw/fw misdesigns are caught early during the hw
eval phase and they don't make it into production.
* Misc fixes, improvements and cleanups, as always.
-----BEGIN PGP SIGNATURE-----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=u1Wg
-----END PGP SIGNATURE-----
Merge tag 'ras_updates_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
- Extend the recovery from MCE in kernel space also to processes which
encounter an MCE in kernel space but while copying from user memory
by sending them a SIGBUS on return to user space and umapping the
faulty memory, by Tony Luck and Youquan Song.
- memcpy_mcsafe() rework by splitting the functionality into
copy_mc_to_user() and copy_mc_to_kernel(). This, as a result, enables
support for new hardware which can recover from a machine check
encountered during a fast string copy and makes that the default and
lets the older hardware which does not support that advance recovery,
opt in to use the old, fragile, slow variant, by Dan Williams.
- New AMD hw enablement, by Yazen Ghannam and Akshay Gupta.
- Do not use MSR-tracing accessors in #MC context and flag any fault
while accessing MCA architectural MSRs as an architectural violation
with the hope that such hw/fw misdesigns are caught early during the
hw eval phase and they don't make it into production.
- Misc fixes, improvements and cleanups, as always.
* tag 'ras_updates_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Allow for copy_mc_fragile symbol checksum to be generated
x86/mce: Decode a kernel instruction to determine if it is copying from user
x86/mce: Recover from poison found while copying from user space
x86/mce: Avoid tail copy when machine check terminated a copy from user
x86/mce: Add _ASM_EXTABLE_CPY for copy user access
x86/mce: Provide method to find out the type of an exception handler
x86/mce: Pass pointer to saved pt_regs to severity calculation routines
x86/copy_mc: Introduce copy_mc_enhanced_fast_string()
x86, powerpc: Rename memcpy_mcsafe() to copy_mc_to_{user, kernel}()
x86/mce: Drop AMD-specific "DEFERRED" case from Intel severity rule list
x86/mce: Add Skylake quirk for patrol scrub reported errors
RAS/CEC: Convert to DEFINE_SHOW_ATTRIBUTE()
x86/mce: Annotate mce_rd/wrmsrl() with noinstr
x86/mce/dev-mcelog: Do not update kflags on AMD systems
x86/mce: Stop mce_reign() from re-computing severity for every CPU
x86/mce: Make mce_rdmsrl() panic on an inaccessible MSR
x86/mce: Increase maximum number of banks to 64
x86/mce: Delay clearing IA32_MCG_STATUS to the end of do_machine_check()
x86/MCE/AMD, EDAC/mce_amd: Remove struct smca_hwid.xec_bitmap
RAS/CEC: Fix cec_init() prototype
Pull KCSAN updates for v5.10 from Paul E. McKenney:
- Improve kernel messages.
- Be more permissive with bitops races under KCSAN_ASSUME_PLAIN_WRITES_ATOMIC=y.
- Optimize debugfs stat counters.
- Introduce the instrument_*read_write() annotations, to provide a
finer description of certain ops - using KCSAN's compound instrumentation.
Use them for atomic RNW and bitops, where appropriate.
Doing this might find new races.
(Depends on the compiler having tsan-compound-read-before-write=1 support.)
- Support atomic built-ins, which will help certain architectures, such as s390.
- Misc enhancements and smaller fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently BUILD_BUG() macro is expanded to smth like the following:
do {
extern void __compiletime_assert_0(void)
__attribute__((error("BUILD_BUG failed")));
if (!(!(1)))
__compiletime_assert_0();
} while (0);
If used in a function body this obviously would produce build errors
with -Wnested-externs and -Werror.
Build objtool with -Wno-nested-externs to enable BUILD_BUG() usage.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
The motivations to go rework memcpy_mcsafe() are that the benefit of
doing slow and careful copies is obviated on newer CPUs, and that the
current opt-in list of CPUs to instrument recovery is broken relative to
those CPUs. There is no need to keep an opt-in list up to date on an
ongoing basis if pmem/dax operations are instrumented for recovery by
default. With recovery enabled by default the old "mcsafe_key" opt-in to
careful copying can be made a "fragile" opt-out. Where the "fragile"
list takes steps to not consume poison across cachelines.
The discussion with Linus made clear that the current "_mcsafe" suffix
was imprecise to a fault. The operations that are needed by pmem/dax are
to copy from a source address that might throw #MC to a destination that
may write-fault, if it is a user page.
So copy_to_user_mcsafe() becomes copy_mc_to_user() to indicate
the separate precautions taken on source and destination.
copy_mc_to_kernel() is introduced as a non-SMAP version that does not
expect write-faults on the destination, but is still prepared to abort
with an error code upon taking #MC.
The original copy_mc_fragile() implementation had negative performance
implications since it did not use the fast-string instruction sequence
to perform copies. For this reason copy_mc_to_kernel() fell back to
plain memcpy() to preserve performance on platforms that did not indicate
the capability to recover from machine check exceptions. However, that
capability detection was not architectural and now that some platforms
can recover from fast-string consumption of memory errors the memcpy()
fallback now causes these more capable platforms to fail.
Introduce copy_mc_enhanced_fast_string() as the fast default
implementation of copy_mc_to_kernel() and finalize the transition of
copy_mc_fragile() to be a platform quirk to indicate 'copy-carefully'.
With this in place, copy_mc_to_kernel() is fast and recovery-ready by
default regardless of hardware capability.
Thanks to Vivek for identifying that copy_user_generic() is not suitable
as the copy_mc_to_user() backend since the #MC handler explicitly checks
ex_has_fault_handler(). Thanks to the 0day robot for catching a
performance bug in the x86/copy_mc_to_user implementation.
[ bp: Add the "why" for this change from the 0/2th message, massage. ]
Fixes: 92b0729c34 ("x86/mm, x86/mce: Add memcpy_mcsafe()")
Reported-by: Erwin Tsaur <erwin.tsaur@intel.com>
Reported-by: 0day robot <lkp@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Tested-by: Erwin Tsaur <erwin.tsaur@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/160195562556.2163339.18063423034951948973.stgit@dwillia2-desk3.amr.corp.intel.com
In reaction to a proposal to introduce a memcpy_mcsafe_fast()
implementation Linus points out that memcpy_mcsafe() is poorly named
relative to communicating the scope of the interface. Specifically what
addresses are valid to pass as source, destination, and what faults /
exceptions are handled.
Of particular concern is that even though x86 might be able to handle
the semantics of copy_mc_to_user() with its common copy_user_generic()
implementation other archs likely need / want an explicit path for this
case:
On Fri, May 1, 2020 at 11:28 AM Linus Torvalds <torvalds@linux-foundation.org> wrote:
>
> On Thu, Apr 30, 2020 at 6:21 PM Dan Williams <dan.j.williams@intel.com> wrote:
> >
> > However now I see that copy_user_generic() works for the wrong reason.
> > It works because the exception on the source address due to poison
> > looks no different than a write fault on the user address to the
> > caller, it's still just a short copy. So it makes copy_to_user() work
> > for the wrong reason relative to the name.
>
> Right.
>
> And it won't work that way on other architectures. On x86, we have a
> generic function that can take faults on either side, and we use it
> for both cases (and for the "in_user" case too), but that's an
> artifact of the architecture oddity.
>
> In fact, it's probably wrong even on x86 - because it can hide bugs -
> but writing those things is painful enough that everybody prefers
> having just one function.
Replace a single top-level memcpy_mcsafe() with either
copy_mc_to_user(), or copy_mc_to_kernel().
Introduce an x86 copy_mc_fragile() name as the rename for the
low-level x86 implementation formerly named memcpy_mcsafe(). It is used
as the slow / careful backend that is supplanted by a fast
copy_mc_generic() in a follow-on patch.
One side-effect of this reorganization is that separating copy_mc_64.S
to its own file means that perf no longer needs to track dependencies
for its memcpy_64.S benchmarks.
[ bp: Massage a bit. ]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: <stable@vger.kernel.org>
Link: http://lore.kernel.org/r/CAHk-=wjSqtXAqfUJxFtWNwmguFASTgB0dz1dT3V-78Quiezqbg@mail.gmail.com
Link: https://lkml.kernel.org/r/160195561680.2163339.11574962055305783722.stgit@dwillia2-desk3.amr.corp.intel.com
With CONFIG_UBSAN_TRAP enabled, the compiler may insert a trap
instruction after a call to a noreturn function. In this case, objtool
warns that the UD2 instruction is unreachable.
This is a behavior seen with Clang, from the oldest version capable of
building the mainline x64_64 kernel (9.0), to the latest experimental
version (12.0).
Objtool silences similar warnings (trap after dead end instructions), so
so expand that check to include dead end functions.
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Rong Chen <rong.a.chen@intel.com>
Cc: Marco Elver <elver@google.com>
Cc: Philip Li <philip.li@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: kasan-dev@googlegroups.com
Cc: x86@kernel.org
Cc: clang-built-linux@googlegroups.com
BugLink: https://github.com/ClangBuiltLinux/linux/issues/1148
Link: https://lore.kernel.org/lkml/CAKwvOdmptEpi8fiOyWUo=AiZJiX+Z+VHJOM2buLPrWsMTwLnyw@mail.gmail.com
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Ilie Halip <ilie.halip@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Relocation for a call destination could point to a symbol that has
type STT_NOTYPE.
Lookup such a symbol when no function is available.
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
When a function is annotated with STACK_FRAME_NON_STANDARD, objtool
doesn't validate its code paths. It also skips sibling call detection
within the function.
But sibling call detection is actually needed for the case where the
ignored function doesn't have any return instructions. Otherwise
objtool naively marks the function as implicit static noreturn, which
affects the reachability of its callers, resulting in "unreachable
instruction" warnings.
Fix it by just enabling sibling call detection for ignored functions.
The 'insn->ignore' check in add_jump_destinations() is no longer needed
after
e6da956795 ("objtool: Don't use ignore flag for fake jumps").
Fixes the following warning:
arch/x86/kvm/vmx/vmx.o: warning: objtool: vmx_handle_exit_irqoff()+0x142: unreachable instruction
which triggers on an allmodconfig with CONFIG_GCOV_KERNEL unset.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lkml.kernel.org/r/5b1e2536cdbaa5246b60d7791b76130a74082c62.1599751464.git.jpoimboe@redhat.com
It is possible for alternative code to unconditionally jump out of the
alternative region. In such a case, if a fake jump is added at the end
of the alternative instructions, the fake jump will never be reached.
Since the fake jump is just a mean to make sure code validation does not
go beyond the set of alternatives, reaching it is not a requirement.
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
save_reg already checks that the register being saved does not already
have a saved state.
Remove redundant checks before processing a register storing operation.
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
The set of registers that can be included in an unwind hint and their
encoding will depend on the architecture. Have arch specific code to
decode that register.
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Unwind hints are useful to provide objtool with information about stack
states in non-standard functions/code.
While the type of information being provided might be very arch
specific, the mechanism to provide the information can be useful for
other architectures.
Move the relevant unwint hint definitions for all architectures to
see.
[ jpoimboe: REGS_IRET -> REGS_PARTIAL ]
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
The way to identify jump tables and retrieve all the data necessary to
handle the different execution branches is not the same on all
architectures. In order to be able to add other architecture support,
define an arch-dependent function to process jump-tables.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Raphael Gault <raphael.gault@arm.com>
[J.T.: Move arm64 bits out of this patch,
Have only one function to find the start of the jump table,
for now assume that the jump table format will be the same as
x86]
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
As pointed out by the comment in handle_group_alt(), support of
relocation for instructions in an alternative group depends on whether
arch specific kernel code handles it.
So, let objtool arch specific code decide whether a relocation for
the alternative section should be accepted.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Some alternatives associated with a specific feature need to be treated
in a special way. Since the features and how to treat them vary from one
architecture to another, move the special case handling to arch specific
code.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Some macros are defined to describe the size and layout of structures
exception_table_entry, jump_entry and alt_instr. These values can vary
from one architecture to another.
Have the values be defined by arch specific code.
Suggested-by: Raphael Gault <raphael.gault@arm.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Do not take into account outdated headers unrelated to the build of the
current architecture.
[ jpoimboe: use $SRCARCH directly ]
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
In order to support multiple architectures and potentially different
sets of headers to compare against their kernel equivalent, it is
simpler to have all headers to check in a single list.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Implementation of ORC requires some definitions that are currently
provided by the target architecture headers. Do not depend on these
definitions when the orc subcommand is not implemented.
This avoid requiring arches with no orc implementation to provide dummy
orc definitions.
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Orc generation is only done for text sections, but some instructions
can be found in non-text sections (e.g. .discard.text sections).
Skip setting their orc sections since their whole sections will be
skipped for orc generation.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Now that the objtool_file can be obtained outside of the check function,
orc generation builtin no longer requires check to explicitly call its
orc related functions.
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Structure objtool_file can be used by different subcommands. In fact
it already is, by check and orc.
Provide a function that allows to initialize objtool_file, that builtin
can call, without relying on check to do the correct setup for them and
explicitly hand the objtool_file to them.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
GCC can turn our static_call(name)(args...) into a tail call, in which
case we get a JMP.d32 into the trampoline (which then does a further
tail-call).
Teach objtool to recognise and mark these in .static_call_sites and
adjust the code patching to deal with this.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20200818135805.101186767@infradead.org
Add the inline static call implementation for x86-64. The generated code
is identical to the out-of-line case, except we move the trampoline into
it's own section.
Objtool uses the trampoline naming convention to detect all the call
sites. It then annotates those call sites in the .static_call_sites
section.
During boot (and module init), the call sites are patched to call
directly into the destination function. The temporary trampoline is
then no longer used.
[peterz: merged trampolines, put trampoline in section]
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20200818135804.864271425@infradead.org
Adds the new __tsan_read_write compound instrumentation to objtool's
uaccess whitelist.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Adds the new TSAN functions that may be emitted for atomic builtins to
objtool's uaccess whitelist.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
- Add support for non-rela relocations, in preparation to merge 'recordmcount'
functionality into objtool.
- Fix assumption that broke under --ffunction-sections (LTO) builds.
- Misc cleanups.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=/CbB
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Add support for non-rela relocations, in preparation to merge
'recordmcount' functionality into objtool
- Fix assumption that broke under --ffunction-sections (LTO) builds
- Misc cleanups
* tag 'objtool-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Add support for relocations without addends
objtool: Rename rela to reloc
objtool: Use sh_info to find the base for .rela sections
objtool: Do not assume order of parent/child functions
Address KCOV vs noinstr. There is no function attribute to selectively
suppress KCOV instrumentation, instead teach objtool to NOP out the
calls in noinstr functions.
This cures a bunch of KCOV crashes (as used by syzcaller).
-----BEGIN PGP SIGNATURE-----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=0Wd6
-----END PGP SIGNATURE-----
Merge tag 'objtool_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
"Three fixes from Peter Zijlstra suppressing KCOV instrumentation in
noinstr sections.
Peter Zijlstra says:
"Address KCOV vs noinstr. There is no function attribute to
selectively suppress KCOV instrumentation, instead teach objtool
to NOP out the calls in noinstr functions"
This cures a bunch of KCOV crashes (as used by syzcaller)"
* tag 'objtool_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix noinstr vs KCOV
objtool: Provide elf_write_{insn,reloc}()
objtool: Clean up elf_write() condition
Since many compilers cannot disable KCOV with a function attribute,
help it to NOP out any __sanitizer_cov_*() calls injected in noinstr
code.
This turns:
12: e8 00 00 00 00 callq 17 <lockdep_hardirqs_on+0x17>
13: R_X86_64_PLT32 __sanitizer_cov_trace_pc-0x4
into:
12: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1)
13: R_X86_64_NONE __sanitizer_cov_trace_pc-0x4
Just like recordmcount does.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
This provides infrastructure to rewrite instructions; this is
immediately useful for helping out with KCOV-vs-noinstr, but will
also come in handy for a bunch of variable sized jump-label patches
that are still on ice.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
With there being multiple ways to change the ELF data, let's more
concisely track modification.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
The UBSAN instrumentation only inserts external CALLs when things go
'BAD', much like WARN(). So treat them similar to WARN()s for noinstr,
that is: allow them, at the risk of taking the machine down, to get
their message out.
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Marco Elver <elver@google.com>
Merge the state of the locking kcsan branch before the read/write_once()
and the atomics modifications got merged.
Squash the fallout of the rebase on top of the read/write once and atomic
fallback work into the merge. The history of the original branch is
preserved in tag locking-kcsan-2020-06-02.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Currently objtool only collects information about relocations with
addends. In recordmcount, which we are about to merge into objtool,
some supported architectures do not use rela relocations.
Signed-off-by: Matt Helsley <mhelsley@vmware.com>
Reviewed-by: Julien Thierry <jthierry@redhat.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Before supporting additional relocation types rename the relevant
types and functions from "rela" to "reloc". This work be done with
the following regex:
sed -e 's/struct rela/struct reloc/g' \
-e 's/\([_\*]\)rela\(s\{0,1\}\)/\1reloc\2/g' \
-e 's/tmprela\(s\{0,1\}\)/tmpreloc\1/g' \
-e 's/relasec/relocsec/g' \
-e 's/rela_list/reloc_list/g' \
-e 's/rela_hash/reloc_hash/g' \
-e 's/add_rela/add_reloc/g' \
-e 's/rela->/reloc->/g' \
-e '/rela[,\.]/{ s/\([^\.>]\)rela\([\.,]\)/\1reloc\2/g ; }' \
-e 's/rela =/reloc =/g' \
-e 's/relas =/relocs =/g' \
-e 's/relas\[/relocs[/g' \
-e 's/relaname =/relocname =/g' \
-e 's/= rela\;/= reloc\;/g' \
-e 's/= relas\;/= relocs\;/g' \
-e 's/= relaname\;/= relocname\;/g' \
-e 's/, rela)/, reloc)/g' \
-e 's/\([ @]\)rela\([ "]\)/\1reloc\2/g' \
-e 's/ rela$/ reloc/g' \
-e 's/, relaname/, relocname/g' \
-e 's/sec->rela/sec->reloc/g' \
-e 's/(\(!\{0,1\}\)rela/(\1reloc/g' \
-i \
arch.h \
arch/x86/decode.c \
check.c \
check.h \
elf.c \
elf.h \
orc_gen.c \
special.c
Notable exceptions which complicate the regex include gelf_*
library calls and standard/expected section names which still use
"rela" because they encode the type of relocation expected. Also, keep
"rela" in the struct because it encodes a specific type of relocation
we currently expect.
It will eventually turn into a member of an anonymous union when a
susequent patch adds implicit addend, or "rel", relocation support.
Signed-off-by: Matt Helsley <mhelsley@vmware.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
