Declarations local to arch/*/kernel/*.c are better off *not* in a public
header - arch/arc/kernel/unaligned.h is just fine for those
bits.
Unlike the parisc case, here we have an extra twist - asm/mmu.h
has an implicit dependency on struct pt_regs, and in some users
that used to be satisfied by include of asm/ptrace.h from
asm/unaligned.h (note that asm/mmu.h itself did _not_ pull asm/unaligned.h
- it relied upon the users having pulled asm/unaligned.h before asm/mmu.h
got there).
Seeing that asm/mmu.h only wants struct pt_regs * arguments in
an extern, just pre-declare it there - less brittle that way.
With that done _all_ asm/unaligned.h instances are reduced to include
of asm-generic/unaligned.h and can be removed - unaligned.h is in
mandatory-y in include/asm-generic/Kbuild.
What's more, we can move asm-generic/unaligned.h to linux/unaligned.h
and switch includes of <asm/unaligned.h> to <linux/unaligned.h>; that's
better off as an auto-generated commit, though, to be done by Linus
at -rc1 time next cycle.
Acked-by: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
step_after_suspend_test fails with device busy error while
writing to /sys/power/state to start suspend. The test believes
it failed to enter suspend state with
$ sudo ./step_after_suspend_test
TAP version 13
Bail out! Failed to enter Suspend state
However, in the kernel message, I indeed see the system get
suspended and then wake up later.
[611172.033108] PM: suspend entry (s2idle)
[611172.044940] Filesystems sync: 0.006 seconds
[611172.052254] Freezing user space processes
[611172.059319] Freezing user space processes completed (elapsed 0.001 seconds)
[611172.067920] OOM killer disabled.
[611172.072465] Freezing remaining freezable tasks
[611172.080332] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[611172.089724] printk: Suspending console(s) (use no_console_suspend to debug)
[611172.117126] serial 00:03: disabled
some other hardware get reconnected
[611203.136277] OOM killer enabled.
[611203.140637] Restarting tasks ...
[611203.141135] usb 1-8.1: USB disconnect, device number 7
[611203.141755] done.
[611203.155268] random: crng reseeded on system resumption
[611203.162059] PM: suspend exit
After investigation, I noticed that for the code block
if (write(power_state_fd, "mem", strlen("mem")) != strlen("mem"))
ksft_exit_fail_msg("Failed to enter Suspend state\n");
The write will return -1 and errno is set to 16 (device busy).
It should be caused by the write function is not successfully returned
before the system suspend and the return value get messed when waking up.
As a result, It may be better to check the time passed of those few
instructions to determine whether the suspend is executed correctly for
it is pretty hard to execute those few lines for 5 seconds.
The timer to wake up the system is set to expire after 5 seconds and
no re-arm. If the timer remaining time is 0 second and 0 nano secomd,
it means the timer expired and wake the system up. Otherwise, the system
could be considered to enter the suspend state failed if there is any
remaining time.
After appling this patch, the test would not fail for it believes the
system does not go to suspend by mistake. It now could continue to the
rest part of the test after suspend.
Fixes: bfd092b8c2 ("selftests: breakpoint: add step_after_suspend_test")
Reported-by: Sinadin Shan <sinadin.shan@oracle.com>
Signed-off-by: Yifei Liu <yifei.l.liu@oracle.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Insert raw strings to prevent Python3 from interpreting string literals
as Unicode strings and "\d" as invalid escaped sequence.
Fix the warnings:
tools/testing/selftests/devices/probe/test_discoverable_devices.py:48:
SyntaxWarning: invalid escape sequence '\d' usb_controller_sysfs_dir =
"usb[\d]+"
tools/testing/selftests/devices/probe/test_discoverable_devices.py: 94:
SyntaxWarning: invalid escape sequence '\d' re_usb_version =
re.compile("PRODUCT=.*/(\d)/.*")
Fixes: dacf1d7a78 ("kselftest: Add test to verify probe of devices from discoverable buses")
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Alessandro Zanni <alessandro.zanni87@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=8cfY
-----END PGP SIGNATURE-----
Merge tag 'hid-for-linus-2024090201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fix from Benjamin Tissoires:
- A small fix from the new HID-BPF code.
The HID-BPF CI started failing completely because the BPF tree is now
stricter, exposing a problem in the hid_bpf_ops.
* tag 'hid-for-linus-2024090201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: bpf: fix cfi stubs for hid_bpf_ops
A bunch of fixes here that came in during the merge window and the first
week of release, plus some new quirks and device IDs. There's nothing
major here, it's a bit bigger than it might've been due to there being
no fixes sent during the merge window due to your vacation.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmb9kbIACgkQJNaLcl1U
h9DoEAf/YFyHf5UchliSj11taVVDxzIZznDVfJdhxw6Iktj7b7SinUNRvGfixXyV
ELbRDP291/Cx0AuoRTbj+wZpO687uLVdTAUfX9OEXIOku0kRCA0XZOyAe+tgtKgr
rCIaj9sCn6CxYWBw4VBDcP4tgvh2igcYKeO2bUvvukHdTJBYTiUxrcJCkVDBQr4t
bzvdlalukcop3yMPZbf41CGf7T0tfh8KkJaNbdnhQLoKD3rekYsShZYmH1wRmCQc
fnwWuOgoREIilPLbae7fhdFmH1EscIt4iZcq8j+tl1Kvj1zKabU0We4Rx2rfWZ/Y
pd+YwxRnrXNI2+hUG6nXAVtYjPRa/A==
=KM7g
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.12
A bunch of fixes here that came in during the merge window and the first
week of release, plus some new quirks and device IDs. There's nothing
major here, it's a bit bigger than it might've been due to there being
no fixes sent during the merge window due to your vacation.
- a couple fixups for adp5589-keys driver
- recently added driver for PixArt PS/2 touchpads is dropped temporarily
because its detection routine is too greedy and mis-identifies devices
from other vendors as PixArt devices.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZv0LRAAKCRBAj56VGEWX
nM7OAP495t23Ay4H7qBnVEv4KHrOkNLwebKudwcokjWQAdnOPgEAu0GfslScWdrO
yYofhsjrph1V2dQOWqoLnd1C4iiHVgA=
=HQCS
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a couple fixups for adp5589-keys driver
- recently added driver for PixArt PS/2 touchpads is dropped
temporarily because its detection routine is too greedy and
mis-identifies devices from other vendors as PixArt devices
* tag 'input-for-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: adp5589-keys - fix adp5589_gpio_get_value()
Input: adp5589-keys - fix NULL pointer dereference
Revert "Input: Add driver for PixArt PS/2 touchpad"
- add new options that enable restart or panic on I/O errors
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRnH8MwLyZDhyYfesYTAyx9YGnhbQUCZv1YFxQcbXBhdG9ja2FA
cmVkaGF0LmNvbQAKCRATAyx9YGnhbTXKAQD29bvBnFN69zYYvrX3X7fHy6o/eOxU
oZJbFpvA2G+NigD+McEsLzOvOE1ZC/okkB/UUfju/ChEvACIgsNXGkPK2Ag=
=ygvr
-----END PGP SIGNATURE-----
Merge tag 'for-6.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mikulas Patocka:
"Revert the patch that made dm-verity restart or panic on I/O errors,
and instead add new explicit options for people who want that
behavior"
* tag 'for-6.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-verity: introduce the options restart_on_error and panic_on_error
Revert: "dm-verity: restart or panic on an I/O error"
- Add support for the FS_IOC_GETFSSYSFSPATH ioctl.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZvu6SQAKCRDdoc3SxdoY
dk/OAQD0wLQqxdrRFe3sbcgVnqKrGxBa59Pj2jQwy70bM9kN4QEAowFKia7PxiFH
JZ20Z1a6om/ksjYouKuYc3QR+yRFkgE=
=vZIR
-----END PGP SIGNATURE-----
Merge tag 'zonefs-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs update from Damien Le Moal:
- Add support for the FS_IOC_GETFSSYSFSPATH ioctl
* tag 'zonefs-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: add support for FS_IOC_GETFSSYSFSPATH
When a battery hook returns an error when adding a new battery, then
the battery hook is automatically unregistered.
However the battery hook provider cannot know that, so it will later
call battery_hook_unregister() on the already unregistered battery
hook, resulting in a crash.
Fix this by using the list head to mark already unregistered battery
hooks as already being unregistered so that they can be ignored by
battery_hook_unregister().
Fixes: fa93854f7a ("battery: Add the battery hooking API")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20241001212835.341788-3-W_Armin@gmx.de
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Move the conditional locking from __battery_hook_unregister()
into battery_hook_unregister() and rename the low-level function
to simplify the locking during battery hook removal.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20241001212835.341788-2-W_Armin@gmx.de
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge series from Alexey Klimov <alexey.klimov@linaro.org>:
This series still keeps "qcom,qrb4210-rb2-sndcard" for sm8250 soundcard. As per
off the list discussion with Srini it was suggested to have it since in future it
may be required to add clocks, workarounds, quirks, model-specific things based on
this compatible. The same as for RB5 compatible in sm8250 snd driver.
This focuses on HDMI audio playback only hence there are no soundwire and dmic pins,
for instance. The work to enable playback via wcd+wsa8815 amplifier is in progress (it works)
and one of the routes is to merge such two patchsets together.
Link to prev series:
https://lore.kernel.org/linux-sound/20240628010715.438471-1-alexey.klimov@linaro.org/
This reverts commit 478689b599.
The fix seems leading to regressions for other systems.
Also, the way to check the presence of IOMMU via get_dma_ops() isn't
reliable and it's no longer applicable for 6.12. After all, it's no
right fix, so let's revert it at first.
To be noted, the PCM buffer allocation has been changed to try the
continuous pages at first since 6.12, so the problem could be already
addressed without this hackish workaround.
Reported-by: Salvatore Bonaccorso <carnil@debian.org>
Closes: https://lore.kernel.org/ZvgCdYfKgwHpJXGE@eldamar.lan
Link: https://patch.msgid.link/20241002155948.4859-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After dividing up a proposed write into subrequests, netfslib sets
NETFS_RREQ_ALL_QUEUED to indicate to the collector that it can move on to
the final cleanup once it has emptied the subrequest queues.
Now, whilst the collector will normally end up running at least once after
this bit is set just because it takes a while to process all the write
subrequests before the collector runs out of subrequests, there exists the
possibility that the issuing thread will be forced to sleep and the
collector thread will clean up all the subrequests before ALL_QUEUED gets
set.
In such a case, the collector thread will not get triggered again and will
never clear NETFS_RREQ_IN_PROGRESS thus leaving a request uncompleted and
causing a potential futute hang.
Fix this by scheduling the write collector if all the subrequest queues are
empty (and thus no writes pending issuance).
Note that we'd do this ideally before queuing the subrequest, but in the
case of buffered writeback, at least, we can't find out that we've run out
of folios until after we've called writeback_iter() and it has returned
NULL - at which point we might not actually have any subrequests still
under construction.
Fixes: 288ace2f57 ("netfs: New writeback implementation")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/3317784.1727880350@warthog.procyon.org.uk
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Guenter Roeck reports that the new slub kunit tests added by commit
4e1c44b3db ("kunit, slub: add test_kfree_rcu() and
test_leak_destroy()") cause a lockup on boot on several architectures
when the kunit tests are configured to be built-in and not modules.
The test_kfree_rcu test invokes kfree_rcu() and boot sequence inspection
showed the runner for built-in kunit tests kunit_run_all_tests() is
called before setting system_state to SYSTEM_RUNNING and calling
rcu_end_inkernel_boot(), so this seems like a likely cause. So while I
was unable to reproduce the problem myself, skipping the test when the
slub_kunit module is built-in should avoid the issue.
An alternative fix that was moving the call to kunit_run_all_tests() a
bit later in the boot was tried, but has broken tests with functions
marked as __init due to free_initmem() already being done.
Fixes: 4e1c44b3db ("kunit, slub: add test_kfree_rcu() and test_leak_destroy()")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/all/6fcb1252-7990-4f0d-8027-5e83f0fb9409@roeck-us.net/
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: rcu@vger.kernel.org
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: David Gow <davidgow@google.com>
Cc: Rae Moar <rmoar@google.com>
Cc: linux-kselftest@vger.kernel.org
Cc: kunit-dev@googlegroups.com
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
The test_leak_destroy kunit test intends to test the detection of stray
objects in kmem_cache_destroy(), which normally produces a warning. The
other slab kunit tests suppress the warnings in the kunit test context,
so suppress warnings and related printk output in this test as well.
Automated test running environments then don't need to learn to filter
the warnings.
Also rename the test's kmem_cache, the name was wrongly copy-pasted from
test_kfree_rcu.
Fixes: 4e1c44b3db ("kunit, slub: add test_kfree_rcu() and test_leak_destroy()")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202408251723.42f3d902-oliver.sang@intel.com
Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Closes: https://lore.kernel.org/all/CAB=+i9RHHbfSkmUuLshXGY_ifEZg9vCZi3fqr99+kmmnpDus7Q@mail.gmail.com/
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/all/6fcb1252-7990-4f0d-8027-5e83f0fb9409@roeck-us.net/
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
This patch introduces the options restart_on_error and panic_on_error on
dm-verity.
Previously, restarting on error was handled by the patch
e6a3531dd5, but Google engineers wanted to
have a special option for it.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Suggested-by: Sami Tolvanen <samitolvanen@google.com>
Suggested-by: Will Drewry <wad@chromium.org>
This reverts commit e6a3531dd5.
The problem that the commit e6a3531dd5
fixes was reported as a security bug, but Google engineers working on
Android and ChromeOS didn't want to change the default behavior, they
want to get -EIO rather than restarting the system, so I am reverting
that commit.
Note also that calling machine_restart from the I/O handling code is
potentially unsafe (the reboot notifiers may wait for the bio that
triggered the restart), but Android uses the reboot notifiers to store
the reboot reason into the PMU microcontroller, so machine_restart must
be used.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Fixes: e6a3531dd5 ("dm-verity: restart or panic on an I/O error")
Suggested-by: Sami Tolvanen <samitolvanen@google.com>
Suggested-by: Will Drewry <wad@chromium.org>
Commit 2fae6bb7be ("xen/privcmd: Add new syscall to get gsi from dev")
adds a weak reverse dependency to the config XEN_PRIVCMD definition,
referring to CONFIG_XEN_PCIDEV_BACKEND. In Kconfig files, one refers to
config options without the CONFIG prefix, though. So in its current form,
this does not create the reverse dependency as intended, but is an
attribute with no effect.
Refer to the intended config option XEN_PCIDEV_BACKEND in the XEN_PRIVCMD
definition.
Fixes: 2fae6bb7be ("xen/privcmd: Add new syscall to get gsi from dev")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <20240930090650.429813-1-lukas.bulwahn@redhat.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
For fixing CVE-2023-6270, f98364e926 ("aoe: fix the potential
use-after-free problem in aoecmd_cfg_pkts") makes tx() calling dev_put()
instead of doing in aoecmd_cfg_pkts(). It avoids that the tx() runs
into use-after-free.
Then Nicolai Stange found more places in aoe have potential use-after-free
problem with tx(). e.g. revalidate(), aoecmd_ata_rw(), resend(), probe()
and aoecmd_cfg_rsp(). Those functions also use aoenet_xmit() to push
packet to tx queue. So they should also use dev_hold() to increase the
refcnt of skb->dev.
On the other hand, moving dev_put() to tx() causes that the refcnt of
skb->dev be reduced to a negative value, because corresponding
dev_hold() are not called in revalidate(), aoecmd_ata_rw(), resend(),
probe(), and aoecmd_cfg_rsp(). This patch fixed this issue.
Cc: stable@vger.kernel.org
Link: https://nvd.nist.gov/vuln/detail/CVE-2023-6270
Fixes: f98364e926 ("aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts")
Reported-by: Nicolai Stange <nstange@suse.com>
Signed-off-by: Chun-Yi Lee <jlee@suse.com>
Link: https://lore.kernel.org/stable/20240624064418.27043-1-jlee%40suse.com
Link: https://lore.kernel.org/r/20241002035458.24401-1-jlee@suse.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
These are called from blkcg_print_blkgs() which already disables IRQs so
disabling it again is wrong. It means that IRQs will be enabled slightly
earlier than intended, however, so far as I can see, this bug is harmless.
Fixes: 35198e3230 ("blk-iocost: read params inside lock in sysfs apis")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/Zv0kudA9xyGdaA4g@stanley.mountain
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix the documentation to match the new function signature.
Fixes: 76c313f658 ("blk-integrity: improved sg segment mapping")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240922141800.3622319-1-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[Syzbot reported]
WARNING: possible circular locking dependency detected
6.11.0-rc4-syzkaller-00019-gb311c1b497e5 #0 Not tainted
------------------------------------------------------
kswapd0/78 is trying to acquire lock:
ffff88801b8d8930 (&group->mark_mutex){+.+.}-{3:3}, at: fsnotify_group_lock include/linux/fsnotify_backend.h:270 [inline]
ffff88801b8d8930 (&group->mark_mutex){+.+.}-{3:3}, at: fsnotify_destroy_mark+0x38/0x3c0 fs/notify/mark.c:578
but task is already holding lock:
ffffffff8ea2fd60 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat mm/vmscan.c:6841 [inline]
ffffffff8ea2fd60 (fs_reclaim){+.+.}-{0:0}, at: kswapd+0xbb4/0x35a0 mm/vmscan.c:7223
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (fs_reclaim){+.+.}-{0:0}:
...
kmem_cache_alloc_noprof+0x3d/0x2a0 mm/slub.c:4044
inotify_new_watch fs/notify/inotify/inotify_user.c:599 [inline]
inotify_update_watch fs/notify/inotify/inotify_user.c:647 [inline]
__do_sys_inotify_add_watch fs/notify/inotify/inotify_user.c:786 [inline]
__se_sys_inotify_add_watch+0x72e/0x1070 fs/notify/inotify/inotify_user.c:729
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
-> #0 (&group->mark_mutex){+.+.}-{3:3}:
...
__mutex_lock+0x136/0xd70 kernel/locking/mutex.c:752
fsnotify_group_lock include/linux/fsnotify_backend.h:270 [inline]
fsnotify_destroy_mark+0x38/0x3c0 fs/notify/mark.c:578
fsnotify_destroy_marks+0x14a/0x660 fs/notify/mark.c:934
fsnotify_inoderemove include/linux/fsnotify.h:264 [inline]
dentry_unlink_inode+0x2e0/0x430 fs/dcache.c:403
__dentry_kill+0x20d/0x630 fs/dcache.c:610
shrink_kill+0xa9/0x2c0 fs/dcache.c:1055
shrink_dentry_list+0x2c0/0x5b0 fs/dcache.c:1082
prune_dcache_sb+0x10f/0x180 fs/dcache.c:1163
super_cache_scan+0x34f/0x4b0 fs/super.c:221
do_shrink_slab+0x701/0x1160 mm/shrinker.c:435
shrink_slab+0x1093/0x14d0 mm/shrinker.c:662
shrink_one+0x43b/0x850 mm/vmscan.c:4815
shrink_many mm/vmscan.c:4876 [inline]
lru_gen_shrink_node mm/vmscan.c:4954 [inline]
shrink_node+0x3799/0x3de0 mm/vmscan.c:5934
kswapd_shrink_node mm/vmscan.c:6762 [inline]
balance_pgdat mm/vmscan.c:6954 [inline]
kswapd+0x1bcd/0x35a0 mm/vmscan.c:7223
[Analysis]
The problem is that inotify_new_watch() is using GFP_KERNEL to allocate
new watches under group->mark_mutex, however if dentry reclaim races
with unlinking of an inode, it can end up dropping the last dentry reference
for an unlinked inode resulting in removal of fsnotify mark from reclaim
context which wants to acquire group->mark_mutex as well.
This scenario shows that all notification groups are in principle prone
to this kind of a deadlock (previously, we considered only fanotify and
dnotify to be problematic for other reasons) so make sure all
allocations under group->mark_mutex happen with GFP_NOFS.
Reported-and-tested-by: syzbot+c679f13773f295d2da53@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c679f13773f295d2da53
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240927143642.2369508-1-lizhi.xu@windriver.com
devm_kasprintf() can return a NULL pointer on failure but this
returned value is not checked.
Fixes: b359760d95 ("ASoC: intel: sof_sdw: Add simple DAI link creation helper")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Link: https://patch.msgid.link/20240925080030.11262-1-hanchunchao@inspur.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In most Linux distribution kernels, the SND is set to m, in such a
case, when booting the kernel on i.MX8MP EVK board, there is a
warning calltrace like below:
Call trace:
snd_card_init+0x484/0x4cc [snd]
snd_card_new+0x70/0xa8 [snd]
snd_soc_bind_card+0x310/0xbd0 [snd_soc_core]
snd_soc_register_card+0xf0/0x108 [snd_soc_core]
devm_snd_soc_register_card+0x4c/0xa4 [snd_soc_core]
That is because the card.owner is not set, a warning calltrace is
raised in the snd_card_init() due to it.
Fixes: aa736700f4 ("ASoC: imx-card: Add imx-card machine driver")
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://patch.msgid.link/20241002025659.723544-1-hui.wang@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
My understanding of the interrupts property is that it can either be:
1/ - TX
2/ - TX
- RX
3/ - Common/combined.
There are very little chances that either:
- TX
- Common/combined
or even
- TX
- RX
- Common/combined
could be a thing.
Looking at the interrupt-names definition (which uses oneOf instead of
anyOf), it makes indeed little sense to use anyOf in the interrupts
definition. I believe this is just a mistake, hence let's fix it.
Fixes: 8be90641a0 ("ASoC: dt-bindings: davinci-mcasp: convert McASP bindings to yaml schema")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241001204749.390054-1-miquel.raynal@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add adsp-backed soundcard compatible for QRB4210 RB2 platform,
which as of now looks fully compatible with SM8250.
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241002022015.867031-2-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Since udf_current_aext() has error handling, udf_next_aext() should have
error handling too. Besides, when too many indirect extents found in one
inode, return -EFSCORRUPTED; when reading block failed, return -EIO.
Signed-off-by: Zhao Mengmeng <zhaomengmeng@kylinos.cn>
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20241001115425.266556-3-zhaomzhao@126.com
When the trigger_tstamp_latched flag is set, the PCM core code assumes that
the low-level driver handles the trigger timestamping itself. Ensure that
runtime->trigger_tstamp is always updated.
Buglink: https://github.com/alsa-project/alsa-lib/issues/387
Reported-by: Zeno Endemann <zeno.endemann@mailbox.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20241002081306.1788405-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As Jan suggested in links below, refactor udf_current_aext() to
differentiate between error, hit EOF and success, it now takes pointer to
etype to store the extent type, return 1 when getting etype success,
return 0 when hitting EOF and return -errno when err.
Link: https://lore.kernel.org/all/20240912111235.6nr3wuqvktecy3vh@quack3/
Signed-off-by: Zhao Mengmeng <zhaomengmeng@kylinos.cn>
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20241001115425.266556-2-zhaomzhao@126.com
Since commit d29e741cad ("gpio: davinci: drop platform data support"),
irqchip is no longer being registered on platforms what don't use
unbanked gpios. Fix this.
Reported-by: Sabeeh Khan <sabeeh-khan@ti.com>
Fixes: d29e741cad ("gpio: davinci: drop platform data support")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20241002071901.2752757-1-vigneshr@ti.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
If you enable "Option -> Show Debug Info" and click a link, the program
terminates with the following error:
*** buffer overflow detected ***: terminated
The buffer overflow is caused by the following line:
strcat(data, "$");
The buffer needs one more byte to accommodate the additional character.
Fixes: c4f7398bee ("kconfig: qconf: make debug links work again")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Now we evaluate directly with preferred_dacs table, the flag is no
longer used and merely a placeholder.
Let's drop the definition and its users.
Link: https://patch.msgid.link/20241001121439.26060-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some time ago, we introduced the obey_preferred_dacs flag for choosing
the DAC/pin pairs specified by the driver instead of parsing the
paths. This works as expected, per se, but there have been a few
cases where we forgot to set this flag while preferred_dacs table is
already set up. It ended up with incorrect wiring and made us
wondering why it doesn't work.
Basically, when the preferred_dacs table is provided, it means that
the driver really wants to wire up to follow that. That is, the
presence of the preferred_dacs table itself is already a "do-it"
flag.
In this patch, we simply replace the evaluation of obey_preferred_dacs
flag with the presence of preferred_dacs table for fixing the
misbehavior. Another patch to drop of the obsoleted flag will
follow.
Fixes: 242d990c15 ("ALSA: hda/generic: Add option to enforce preferred_dacs pairs")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1219803
Link: https://patch.msgid.link/20241001121439.26060-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
new_dir does *NOT* point into dir_folio - it's an inode, not a pointer
to ufs directory entry.
Fixes: 516b97cf03 "ufs: Convert directory handling to kmap_local"
Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Declarations local to arch/*/kernel/*.c are better off *not* in a public
header - arch/parisc/kernel/unaligned.h is just fine for those
bits.
With that done parisc asm/unaligned.h is reduced to include
of asm-generic/unaligned.h and can be removed - unaligned.h is in
mandatory-y in include/asm-generic/Kbuild.
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Due to server permission control, the client does not have access to
the shared root directory, but can access subdirectories normally, so
users usually mount the shared subdirectories directly. In this case,
queryfs should use the actual path instead of the root directory to
avoid the call returning an error (EACCES).
Signed-off-by: wangrong <wangrong@uniontech.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
[Why]
Connected with a Thunderbolt monitor and do the suspend and the system
may hang while resume.
The TBT monitor HPD will be triggered during the resume procedure
and call the drm_client_modeset_probe() while
struct drm_connector connector->dev->master is NULL.
It will mess up the pipe topology after resume.
[How]
Skip the TBT monitor HPD during the resume procedure because we
currently will probe the connectors after resume by default.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 453f86a269)
Cc: stable@vger.kernel.org
[Why]
There are more IPS modes other than DMUB_IPS_ENABLE that enables IPS. We
need to enable the hotplug detect idle workqueue for those modes as
well.
[How]
Modify the if condition to initialize the workqueue in all IPS modes
except for DMUB_IPS_DISABLE_ALL.
Fixes: 65444581a4 ("drm/amd/display: Determine IPS mode by ASIC and PMFW versions")
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 181db30bcf)
Cc: stable@vger.kernel.org
[WHY & HOW]
Some eDP panels suffer from flicking when HDR is enabled in KDE. This
quirk works around it by skipping VSC that is incompatible with eDP
panels.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3151
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4d4257280d)
Cc: stable@vger.kernel.org
[why]
set dispclk to 0 cause stability issue.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1c6b16ebf5)
Cc: stable@vger.kernel.org
Existing last step of dsc policy is to restore pbn value under minimum compression
when try to greedily disable dsc for a stream failed to fit in MST bw.
Optimized dsc params result from optimization step is not necessarily the minimum compression,
therefore it is not correct to restore the pbn under minimum compression rate.
Restore the pbn under minimum compression instead of the value from optimized pbn could result
in the dsc params not correct at the modeset where atomic_check failed due to not
enough bw. One or more monitors connected could not light up in such case.
Restore the optimized pbn value, instead of using the pbn value under minimum
compression.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 352c3165d2)
Cc: stable@vger.kernel.org
[WHY & HOW]
Mismatch in DCN35 DML2 cause bw validation failed to acquire unexpected DPP pipe to cause
grey screen and system hang. Remove EnhancedPrefetchScheduleAccelerationFinal value override
to match HW spec.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9dad21f910)
Cc: stable@vger.kernel.org
Starting with upstream Rust commit a5e3a3f9b6bd ("move
`manual_c_str_literals` to complexity"), to be released in Rust 1.83.0
[1], Clippy now warns on `manual_c_str_literals` by default, e.g.:
error: manually constructing a nul-terminated string
--> rust/kernel/kunit.rs:21:13
|
21 | b"\x013%pA\0".as_ptr() as _,
| ^^^^^^^^^^^^^ help: use a `c""` literal: `c"\x013%pA"`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#manual_c_str_literals
= note: `-D clippy::manual-c-str-literals` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::manual_c_str_literals)]`
Apply the suggestion to clean up the warnings.
Link: https://github.com/rust-lang/rust-clippy/pull/13263 [1]
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240927164414.560906-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
