mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-18 16:44:27 +08:00
a530bbc538
1306625 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Huang Ying
|
a530bbc538 |
memory tiers: use default_dram_perf_ref_source in log message
Commit |
||
Guenter Roeck
|
c509f67df3 |
Revert "list: test: fix tests for list_cut_position()"
This reverts commit |
||
Muhammad Usama Anjum
|
f30beffd97 |
kselftests: mm: fix wrong __NR_userfaultfd value
grep -rnIF "#define __NR_userfaultfd"
tools/include/uapi/asm-generic/unistd.h:681:#define __NR_userfaultfd 282
arch/x86/include/generated/uapi/asm/unistd_32.h:374:#define
__NR_userfaultfd 374
arch/x86/include/generated/uapi/asm/unistd_64.h:327:#define
__NR_userfaultfd 323
arch/x86/include/generated/uapi/asm/unistd_x32.h:282:#define
__NR_userfaultfd (__X32_SYSCALL_BIT + 323)
arch/arm/include/generated/uapi/asm/unistd-eabi.h:347:#define
__NR_userfaultfd (__NR_SYSCALL_BASE + 388)
arch/arm/include/generated/uapi/asm/unistd-oabi.h:359:#define
__NR_userfaultfd (__NR_SYSCALL_BASE + 388)
include/uapi/asm-generic/unistd.h:681:#define __NR_userfaultfd 282
The number is dependent on the architecture. The above data shows that:
x86 374
x86_64 323
The value of __NR_userfaultfd was changed to 282 when asm-generic/unistd.h
was included. It makes the test to fail every time as the correct number
of this syscall on x86_64 is 323. Fix the header to asm/unistd.h.
Link: https://lkml.kernel.org/r/20240923053836.3270393-1-usama.anjum@collabora.com
Fixes:
|
||
Tiezhu Yang
|
c5b1184dec |
compiler.h: specify correct attribute for .rodata..c_jump_table
Currently, there is an assembler message when generating kernel/bpf/core.o
under CONFIG_OBJTOOL with LoongArch compiler toolchain:
Warning: setting incorrect section attributes for .rodata..c_jump_table
This is because the section ".rodata..c_jump_table" should be readonly,
but there is a "W" (writable) part of the flags:
$ readelf -S kernel/bpf/core.o | grep -A 1 "rodata..c"
[34] .rodata..c_j[...] PROGBITS 0000000000000000 0000d2e0
0000000000000800 0000000000000000 WA 0 0 8
There is no above issue on x86 due to the generated section flag is only
"A" (allocatable). In order to silence the warning on LoongArch, specify
the attribute like ".rodata..c_jump_table,\"a\",@progbits #" explicitly,
then the section attribute of ".rodata..c_jump_table" must be readonly
in the kernel/bpf/core.o file.
Before:
$ objdump -h kernel/bpf/core.o | grep -A 1 "rodata..c"
21 .rodata..c_jump_table 00000800 0000000000000000 0000000000000000 0000d2e0 2**3
CONTENTS, ALLOC, LOAD, RELOC, DATA
After:
$ objdump -h kernel/bpf/core.o | grep -A 1 "rodata..c"
21 .rodata..c_jump_table 00000800 0000000000000000 0000000000000000 0000d2e0 2**3
CONTENTS, ALLOC, LOAD, RELOC, READONLY, DATA
By the way, AFAICT, maybe the root cause is related with the different
compiler behavior of various archs, so to some extent this change is a
workaround for LoongArch, and also there is no effect for x86 which is the
only port supported by objtool before LoongArch with this patch.
Link: https://lkml.kernel.org/r/20240924062710.1243-1-yangtiezhu@loongson.cn
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org> [6.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
Diederik de Haas
|
6901cf55de |
mm/damon/Kconfig: update DAMON doc URL
The old URL doesn't really work anymore and as the documentation has been integrated in the main kernel documentation site, change the URL to point to that. Link: https://lkml.kernel.org/r/20240924082331.11499-1-didi.debian@cknow.org Signed-off-by: Diederik de Haas <didi.debian@cknow.org> Reviewed-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
qiwu.chen
|
ff7f5ad7bc |
mm: kfence: fix elapsed time for allocated/freed track
Fix elapsed time for the allocated/freed track introduced by commit |
||
Mohammed Anees
|
7bf1823e01 |
ocfs2: fix deadlock in ocfs2_get_system_file_inode
syzbot has found a possible deadlock in ocfs2_get_system_file_inode [1].
The scenario is depicted here,
CPU0 CPU1
lock(&ocfs2_file_ip_alloc_sem_key);
lock(&osb->system_file_mutex);
lock(&ocfs2_file_ip_alloc_sem_key);
lock(&osb->system_file_mutex);
The function calls which could lead to this are:
CPU0
ocfs2_mknod - lock(&ocfs2_file_ip_alloc_sem_key);
.
.
.
ocfs2_get_system_file_inode - lock(&osb->system_file_mutex);
CPU1 -
ocfs2_fill_super - lock(&osb->system_file_mutex);
.
.
.
ocfs2_read_virt_blocks - lock(&ocfs2_file_ip_alloc_sem_key);
This issue can be resolved by making the down_read -> down_read_try
in the ocfs2_read_virt_blocks.
[1] https://syzkaller.appspot.com/bug?extid=e0055ea09f1f5e6fabdd
Link: https://lkml.kernel.org/r/20240924093257.7181-1-pvmohammedanees2003@gmail.com
Signed-off-by: Mohammed Anees <pvmohammedanees2003@gmail.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reported-by: <syzbot+e0055ea09f1f5e6fabdd@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=e0055ea09f1f5e6fabdd
Tested-by: syzbot+e0055ea09f1f5e6fabdd@syzkaller.appspotmail.com
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
Gautham Ananthakrishna
|
5ca60b86f5 |
ocfs2: reserve space for inline xattr before attaching reflink tree
One of our customers reported a crash and a corrupted ocfs2 filesystem.
The crash was due to the detection of corruption. Upon troubleshooting,
the fsck -fn output showed the below corruption
[EXTENT_LIST_FREE] Extent list in owner 33080590 claims 230 as the next free chain record,
but fsck believes the largest valid value is 227. Clamp the next record value? n
The stat output from the debugfs.ocfs2 showed the following corruption
where the "Next Free Rec:" had overshot the "Count:" in the root metadata
block.
Inode: 33080590 Mode: 0640 Generation: 2619713622 (0x9c25a856)
FS Generation: 904309833 (0x35e6ac49)
CRC32: 00000000 ECC: 0000
Type: Regular Attr: 0x0 Flags: Valid
Dynamic Features: (0x16) HasXattr InlineXattr Refcounted
Extended Attributes Block: 0 Extended Attributes Inline Size: 256
User: 0 (root) Group: 0 (root) Size: 281320357888
Links: 1 Clusters: 141738
ctime: 0x66911b56 0x316edcb8 -- Fri Jul 12 06:02:30.829349048 2024
atime: 0x66911d6b 0x7f7a28d -- Fri Jul 12 06:11:23.133669517 2024
mtime: 0x66911b56 0x12ed75d7 -- Fri Jul 12 06:02:30.317552087 2024
dtime: 0x0 -- Wed Dec 31 17:00:00 1969
Refcount Block: 2777346
Last Extblk: 2886943 Orphan Slot: 0
Sub Alloc Slot: 0 Sub Alloc Bit: 14
Tree Depth: 1 Count: 227 Next Free Rec: 230
## Offset Clusters Block#
0 0 2310 2776351
1 2310 2139 2777375
2 4449 1221 2778399
3 5670 731 2779423
4 6401 566 2780447
....... .... .......
....... .... .......
The issue was in the reflink workfow while reserving space for inline
xattr. The problematic function is ocfs2_reflink_xattr_inline(). By the
time this function is called the reflink tree is already recreated at the
destination inode from the source inode. At this point, this function
reserves space for inline xattrs at the destination inode without even
checking if there is space at the root metadata block. It simply reduces
the l_count from 243 to 227 thereby making space of 256 bytes for inline
xattr whereas the inode already has extents beyond this index (in this
case up to 230), thereby causing corruption.
The fix for this is to reserve space for inline metadata at the destination
inode before the reflink tree gets recreated. The customer has verified the
fix.
Link: https://lkml.kernel.org/r/20240918063844.1830332-1-gautham.ananthakrishna@oracle.com
Fixes:
|
||
Jeongjun Park
|
8001070cfb |
mm: migrate: annotate data-race in migrate_folio_unmap()
I found a report from syzbot [1]
This report shows that the value can be changed, but in reality, the
value of __folio_set_movable() cannot be changed because it holds the
folio refcount.
Therefore, it is appropriate to add an annotate to make KCSAN
ignore that data-race.
[1]
==================================================================
BUG: KCSAN: data-race in __filemap_remove_folio / migrate_pages_batch
write to 0xffffea0004b81dd8 of 8 bytes by task 6348 on cpu 0:
page_cache_delete mm/filemap.c:153 [inline]
__filemap_remove_folio+0x1ac/0x2c0 mm/filemap.c:233
filemap_remove_folio+0x6b/0x1f0 mm/filemap.c:265
truncate_inode_folio+0x42/0x50 mm/truncate.c:178
shmem_undo_range+0x25b/0xa70 mm/shmem.c:1028
shmem_truncate_range mm/shmem.c:1144 [inline]
shmem_evict_inode+0x14d/0x530 mm/shmem.c:1272
evict+0x2f0/0x580 fs/inode.c:731
iput_final fs/inode.c:1883 [inline]
iput+0x42a/0x5b0 fs/inode.c:1909
dentry_unlink_inode+0x24f/0x260 fs/dcache.c:412
__dentry_kill+0x18b/0x4c0 fs/dcache.c:615
dput+0x5c/0xd0 fs/dcache.c:857
__fput+0x3fb/0x6d0 fs/file_table.c:439
____fput+0x1c/0x30 fs/file_table.c:459
task_work_run+0x13a/0x1a0 kernel/task_work.c:228
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop kernel/entry/common.c:114 [inline]
exit_to_user_mode_prepare include/linux/entry-common.h:328 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
syscall_exit_to_user_mode+0xbe/0x130 kernel/entry/common.c:218
do_syscall_64+0xd6/0x1c0 arch/x86/entry/common.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
read to 0xffffea0004b81dd8 of 8 bytes by task 6342 on cpu 1:
__folio_test_movable include/linux/page-flags.h:699 [inline]
migrate_folio_unmap mm/migrate.c:1199 [inline]
migrate_pages_batch+0x24c/0x1940 mm/migrate.c:1797
migrate_pages_sync mm/migrate.c:1963 [inline]
migrate_pages+0xff1/0x1820 mm/migrate.c:2072
do_mbind mm/mempolicy.c:1390 [inline]
kernel_mbind mm/mempolicy.c:1533 [inline]
__do_sys_mbind mm/mempolicy.c:1607 [inline]
__se_sys_mbind+0xf76/0x1160 mm/mempolicy.c:1603
__x64_sys_mbind+0x78/0x90 mm/mempolicy.c:1603
x64_sys_call+0x2b4d/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:238
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xc9/0x1c0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
value changed: 0xffff888127601078 -> 0x0000000000000000
Link: https://lkml.kernel.org/r/20240924130053.107490-1-aha310510@gmail.com
Fixes:
|
||
Steve Sistare
|
dc677b5f37 |
mm/hugetlb: simplify refs in memfd_alloc_folio
The folio_try_get in memfd_alloc_folio is not necessary. Delete it, and
delete the matching folio_put in memfd_pin_folios. This also avoids
leaking a ref if the memfd_alloc_folio call to hugetlb_add_to_page_cache
fails. That error path is also broken in a second way -- when its
folio_put causes the ref to become 0, it will implicitly call
free_huge_folio, but then the path *explicitly* calls free_huge_folio.
Delete the latter.
This is a continuation of the fix
"mm/hugetlb: fix memfd_pin_folios free_huge_pages leak"
[steven.sistare@oracle.com: remove explicit call to free_huge_folio(), per Matthew]
Link: https://lkml.kernel.org/r/Zti-7nPVMcGgpcbi@casper.infradead.org
Link: https://lkml.kernel.org/r/1725481920-82506-1-git-send-email-steven.sistare@oracle.com
Link: https://lkml.kernel.org/r/1725478868-61732-1-git-send-email-steven.sistare@oracle.com
Fixes:
|
||
|
Steve Sistare
|
ce645b9fdc |
mm/gup: fix memfd_pin_folios alloc race panic
If memfd_pin_folios tries to create a hugetlb page, but someone else
already did, then folio gets the value -EEXIST here:
folio = memfd_alloc_folio(memfd, start_idx);
if (IS_ERR(folio)) {
ret = PTR_ERR(folio);
if (ret != -EEXIST)
goto err;
then on the next trip through the "while start_idx" loop we panic here:
if (folio) {
folio_put(folio);
To fix, set the folio to NULL on error.
Link: https://lkml.kernel.org/r/1725373521-451395-6-git-send-email-steven.sistare@oracle.com
Fixes:
|
||
|
Steve Sistare
|
9289f020da |
mm/gup: fix memfd_pin_folios hugetlb page allocation
When memfd_pin_folios -> memfd_alloc_folio creates a hugetlb page, the
index is wrong. The subsequent call to filemap_get_folios_contig thus
cannot find it, and fails, and memfd_pin_folios loops forever. To fix,
adjust the index for the huge_page_order.
memfd_alloc_folio also forgets to unlock the folio, so the next touch of
the page calls hugetlb_fault which blocks forever trying to take the lock.
Unlock it.
Link: https://lkml.kernel.org/r/1725373521-451395-5-git-send-email-steven.sistare@oracle.com
Fixes:
|
||
|
Steve Sistare
|
26a8ea8092 |
mm/hugetlb: fix memfd_pin_folios resv_huge_pages leak
memfd_pin_folios followed by unpin_folios leaves resv_huge_pages elevated
if the pages were not already faulted in. During a normal page fault,
resv_huge_pages is consumed here:
hugetlb_fault()
alloc_hugetlb_folio()
dequeue_hugetlb_folio_vma()
dequeue_hugetlb_folio_nodemask()
dequeue_hugetlb_folio_node_exact()
free_huge_pages--
resv_huge_pages--
During memfd_pin_folios, the page is created by calling
alloc_hugetlb_folio_nodemask instead of alloc_hugetlb_folio, and
resv_huge_pages is not modified:
memfd_alloc_folio()
alloc_hugetlb_folio_nodemask()
dequeue_hugetlb_folio_nodemask()
dequeue_hugetlb_folio_node_exact()
free_huge_pages--
alloc_hugetlb_folio_nodemask has other callers that must not modify
resv_huge_pages. Therefore, to fix, define an alternate version of
alloc_hugetlb_folio_nodemask for this call site that adjusts
resv_huge_pages.
Link: https://lkml.kernel.org/r/1725373521-451395-4-git-send-email-steven.sistare@oracle.com
Fixes:
|
||
|
Steve Sistare
|
c56b6f3d80 |
mm/hugetlb: fix memfd_pin_folios free_huge_pages leak
memfd_pin_folios followed by unpin_folios fails to restore free_huge_pages
if the pages were not already faulted in, because the folio refcount for
pages created by memfd_alloc_folio never goes to 0. memfd_pin_folios
needs another folio_put to undo the folio_try_get below:
memfd_alloc_folio()
alloc_hugetlb_folio_nodemask()
dequeue_hugetlb_folio_nodemask()
dequeue_hugetlb_folio_node_exact()
folio_ref_unfreeze(folio, 1); ; adds 1 refcount
folio_try_get() ; adds 1 refcount
hugetlb_add_to_page_cache() ; adds 512 refcount (on x86)
With the fix, after memfd_pin_folios + unpin_folios, the refcount for the
(unfaulted) page is 512, which is correct, as the refcount for a faulted
unpinned page is 513.
Link: https://lkml.kernel.org/r/1725373521-451395-3-git-send-email-steven.sistare@oracle.com
Fixes:
|
||
|
Steve Sistare
|
c225c4f605 |
mm/filemap: fix filemap_get_folios_contig THP panic
Patch series "memfd-pin huge page fixes".
Fix multiple bugs that occur when using memfd_pin_folios with hugetlb
pages and THP. The hugetlb bugs only bite when the page is not yet
faulted in when memfd_pin_folios is called. The THP bug bites when the
starting offset passed to memfd_pin_folios is not huge page aligned. See
the commit messages for details.
This patch (of 5):
memfd_pin_folios on memory backed by THP panics if the requested start
offset is not huge page aligned:
BUG: kernel NULL pointer dereference, address: 0000000000000036
RIP: 0010:filemap_get_folios_contig+0xdf/0x290
RSP: 0018:ffffc9002092fbe8 EFLAGS: 00010202
RAX: 0000000000000002 RBX: 0000000000000002 RCX: 0000000000000002
The fault occurs here, because xas_load returns a folio with value 2:
filemap_get_folios_contig()
for (folio = xas_load(&xas); folio && xas.xa_index <= end;
folio = xas_next(&xas)) {
...
if (!folio_try_get(folio)) <-- BOOM
"2" is an xarray sibling entry. We get it because memfd_pin_folios does
not round the indices passed to filemap_get_folios_contig to huge page
boundaries for THP, so we load from the middle of a huge page range see a
sibling. (It does round for hugetlbfs, at the is_file_hugepages test).
To fix, if the folio is a sibling, then return the next index as the
starting point for the next call to filemap_get_folios_contig.
Link: https://lkml.kernel.org/r/1725373521-451395-1-git-send-email-steven.sistare@oracle.com
Link: https://lkml.kernel.org/r/1725373521-451395-2-git-send-email-steven.sistare@oracle.com
Fixes:
|
||
|
Guenter Roeck
|
a334407810 |
mm: make SPLIT_PTE_PTLOCKS depend on SMP
SPLIT_PTE_PTLOCKS depends on "NR_CPUS >= 4". Unfortunately, that
evaluates to true if there is no NR_CPUS configuration option. This
results in CONFIG_SPLIT_PTE_PTLOCKS=y for mac_defconfig. This in turn
causes the m68k "q800" and "virt" machines to crash in qemu if debugging
options are enabled.
Making CONFIG_SPLIT_PTE_PTLOCKS dependent on the existence of NR_CPUS does
not work since a dependency on the existence of a numeric Kconfig entry
always evaluates to false. Example:
config HAVE_NO_NR_CPUS
def_bool y
depends on !NR_CPUS
After adding this to a Kconfig file, "make defconfig" includes:
$ grep NR_CPUS .config
CONFIG_NR_CPUS=64
CONFIG_HAVE_NO_NR_CPUS=y
Defining NR_CPUS for m68k does not help either since many architectures
define NR_CPUS only for SMP configurations.
Make SPLIT_PTE_PTLOCKS depend on SMP instead to solve the problem.
Link: https://lkml.kernel.org/r/20240924154205.1491376-1-linux@roeck-us.net
Fixes:
|
||
Lorenzo Stoakes
|
c234c65340 |
tools: fix shared radix-tree build
The shared radix-tree build is not correctly recompiling when
lib/maple_tree.c and lib/test_maple_tree.c are modified - fix this by
adding these core components to the SHARED_DEPS list.
Additionally, add missing header guards to shared header files.
Link: https://lkml.kernel.org/r/20240924180724.112169-1-lorenzo.stoakes@oracle.com
Fixes:
|
||
Linus Torvalds
|
abf2050f51 |
media updates for v6.12-rc1
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmbxByQACgkQCF8+vY7k 4RUWeg//QHB1sjjYsRs0IF6wBdzxWwpjqudxLjUTDEMKHVHUuCPRzMayZrokfTha /NOt+SSKpZqRtCjKuyLz7lup81b+oFXQ4CKChXJvLVJ+wuFFd/B9fbs3yw5fCWFk odHjVUpLOqdDSOHcqisKwim0ENzvJ4/rvFiiWUPqPJbjWYEyXX4eW3F8JlAXkdkI OGX9ixPsdAG2vdXpIsp3T3/KKTo7qwM6j/ckQ4SxkrTHMMdvJrkl3HutibaqOmOq FcR4Y9XSkBsNlrJ9CvG/uOSz5aQrY7A7s21OiH59FFyeOWsvKGFkLmAox/+M6vg8 G/cjZjK3AiDll2fmAWo33MuyQG9HOTEFjWNN3cusr1gTcFowqH+cIjV3SKa1dH/1 G+4KoOzJdkFrt1Y21zg+tWejoOjdPpklTiSAhgYRSblqsMbr3XF0cOqnSs5JOKo3 ZgMko/JEI0CKltYc7kcTy8w6fg3g8B9RJ7nATgsKEQsln1hEy/Bii482tk6vbb9g 7YLAzrExWnLjxOxco/LzHcBkQMov6/HA5ntEMieaybRcMPsXE8WNA2ElNOFOREgP MSWqoQD+7CuqYRnmfpQw2SPA0nRy2BT4ltITsA/ksfBWLvoK8UX99eiznkpWSm7p 191mGPalKV07RUVXgXRTynTvfma6oTKIaebvPLoVaKg11cC5hq0= =TPMV -----END PGP SIGNATURE----- Merge tag 'media/v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - New CEC driver: Extron DA HD 4K Plus - Lots of driver fixes, cleanups and improvements * tag 'media/v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (179 commits) media: atomisp: Use clamp() in ia_css_eed1_8_vmem_encode() media: atomisp: Fix eed1_8 code assigning signed values to an unsigned variable media: atomisp: set lock before calling vb2_queue_init() media: atomisp: Improve binary finding debug logging media: atomisp: Drop dev_dbg() calls from hmm_[alloc|free]() media: atomisp: csi2-bridge: Add DMI quirk for t4ka3 on Xiaomi Mipad2 media: atomisp: add missing wait_prepare/finish ops media: atomisp: Remove unused declaration media: atomisp: use clamp() in compute_coring() media: atomisp: use clamp() in ia_css_eed1_8_encode() media: atomisp: Simplify ia_css_pipe_create_cas_scaler_desc_single_output() media: atomisp: Replace rarely used macro from math_support.h media: atomisp: Remove duplicated leftover, i.e. sh_css_dvs_info.h media: atomisp: bnr: fix trailing statement media: atomisp: move trailing */ to separate lines media: atomisp: move trailing statement to next line. media: atomisp: Fix trailing statement in ia_css_de.host.c media: atomisp: Fix spelling mistakes in atomisp.h media: atomisp: Fix spelling mistakes in atomisp_platform.h media: atomisp: Fix spelling mistake in csi_rx_public.h ... |
||
|
Linus Torvalds
|
9ab27b0186 |
The core clk framework is left largely untouched this time around except for
support for the newly ratified DT property 'assigned-clock-rates-u64'. I'm much
more excited about the support for loading DT overlays from KUnit tests so that
we can test how the clk framework parses DT nodes during clk registration. The
clk framework has some places that are highly DeviceTree dependent so this
charts the path to extend the KUnit tests to cover even more framework code in
the future. I've got some more tests on the list that use the DT overlay
support, but they uncovered issues with clk unregistration that I'm still
working on fixing.
Outside the core, the clk driver update pile is dominated by Qualcomm and
Renesas SoCs, making it fairly usual. Looking closer, there are fixes for
things all over the place, like adding missing clk frequencies or moving
defines for the number of clks out of DT binding headers into the drivers.
There are even conversions of DT bindings to YAML and migration away from
strings to describe clk topology. Overall it doesn't look unusual so I expect
the new drivers to be where we'll have fixes in the coming weeks.
Core:
- KUnit tests for clk registration and fixed rate basic clk type
- A couple more devm helpers, one consumer and one provider
- Support for assigned-clock-rates-u64
New Drivers:
- Camera, display and GPU clocks on Qualcomm SM4450
- Camera clocks on Qualcomm SM8150
- Rockchip rk3576 clks
- Microchip SAM9X7 clks
- Renesas RZ/V2H(P) (R9A09G057) clks
Updates:
- Mark a bunch of struct freq_tbl const to reduce .data usage
- Add Qualcomm MSM8226 A7PLL and Regera PLL support
- Fix the Qualcomm Lucid 5LPE PLL configuration sequence to not reuse
Trion, as they do differ
- A number of fixes to the Qualcomm SM8550 display clock driver
- Fold Qualcomm SM8650 display clock driver into SM8550 one
- Add missing clocks and GDSCs needed for audio on Qualcomm MSM8998
- Add missing USB MP resets, GPLL9, and QUPv3 DFS to Qualcomm SC8180X
- Fix sdcc clk frequency tables on Qualcomm SC8180X
- Drop the Qualcomm SM8150 gcc_cpuss_ahb_clk_src
- Mark Qualcomm PCIe GDSCs as RET_ON on sm8250 and sm8540 to avoid them
turning off during suspend
- Use the HW_CTRL mechanism on Qualcomm SM8550 video clock controller
GDSCs
- Get rid of CLK_NR_CLKS defines in Rockchip DT binding headers
- Some fixes for Rockchip rk3228 and rk3588
- Exynos850: Add clock for Thermal Management Unit
- Exynos7885: Fix duplicated ID in the header, add missing TOP PLLs and
add clocks for USB block in the FSYS clock controller
- ExynosAutov9: Add DPUM clock controller
- ExynosAutov920: Add new (first) clock controllers: TOP and PERIC0
(and a bit more complete bindings)
- Use clk_hw pointer instead of fw_name for acm_aud_clk[0-1]_sel clocks
on i.MX8Q as parents in ACM provider
- Add i.MX95 NETCMIX support to the block control provider
- Fix parents for ENETx_REF_SEL clocks on i.MX6UL
- Add USB clocks, resets and power domains on Renesas RZ/G3S
- Add Generic Timer (GTM), I2C Bus Interface (RIIC), SD/MMC Host
Interface (SDHI) and Watchdog Timer (WDT) clocks and resets on
Renesas RZ/V2H
- Add PCIe, PWM, and CAN-FD clocks on Renesas R-Car V4M
- Add LCD controller clocks and resets on Renesas RZ/G2UL
- Add DMA clocks and resets on Renesas RZ/G3S
- Add fractional multiplication PLL support on Renesas R-Car Gen4
- Document support for the Renesas RZ/G2M v3.0 (r8a774a3) SoC
- Support for the Microchip SAM9X7 SoC as follows:
- Updates for the Microchip PLL drivers
- DT binding documentation updates (for the new clock driver and for
the slow clock controller that SAM9X7 is using)
- A fix for the Microchip SAMA7G5 clock driver to avoid allocating more
memory than necessary
- Constify some Amlogic structs
- Add SM1 eARC clocks for Amlogic
- Introduce a symbol namespace for Amlogic clock specific symbols
- Add reset controller support to audiomix block control on i.MX
- Add CLK_SET_RATE_PARENT flag to all audiomix clocks and to
i.MX7D lcdif_pixel_src clock
- Fix parent clocks for earc_phy and audpll on i.MX8MP
- Fix default parents for enet[12]_ref_sel on i.MX6UL
- Add ops in composite 8M and 93 that allow no-op on disable
- Add check for PCC present bit on composite 7ULP register
- Fix fractional part for fracn-gppll on prepare in i.MX
- Fix clock tree update for TF-A managed clocks on i.MX8M
- Drop CLK_SET_PARENT_GATE for DRAM mux on i.MX7D
- Add the SAI7 IPG clock for i.MX8MN
- Mark the 'nand_usdhc_bus' clock as non-critical on i.MX8MM
- Add LVDS bypass clocks on i.MX8QXP
- Add muxes for MIPI and PHY ref clocks on i.MX
- Reorder dc0_bypass0_clk, lcd_pxl and dc1_disp clocks on i.MX8QXP
- Add 1039.5MHz and 800MHz rates to fracn-gppll table on i.MX
- Add CLK_SET_RATE_PARENT for media_disp pixel clocks on i.MX8QXP
- Add some module descriptions to the i.MX generic and the
i.MXRT1050 driver
- Fix return value for bypass for composite i.MX7ULP
- Move Mediatek clk bindings to clock/
- Convert some more clk bindings to dt schema
-----BEGIN PGP SIGNATURE-----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=XmiQ
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The core clk framework is left largely untouched this time around
except for support for the newly ratified DT property
'assigned-clock-rates-u64'.
I'm much more excited about the support for loading DT overlays from
KUnit tests so that we can test how the clk framework parses DT nodes
during clk registration. The clk framework has some places that are
highly DeviceTree dependent so this charts the path to extend the
KUnit tests to cover even more framework code in the future. I've got
some more tests on the list that use the DT overlay support, but they
uncovered issues with clk unregistration that I'm still working on
fixing.
Outside the core, the clk driver update pile is dominated by Qualcomm
and Renesas SoCs, making it fairly usual. Looking closer, there are
fixes for things all over the place, like adding missing clk
frequencies or moving defines for the number of clks out of DT binding
headers into the drivers. There are even conversions of DT bindings to
YAML and migration away from strings to describe clk topology. Overall
it doesn't look unusual so I expect the new drivers to be where we'll
have fixes in the coming weeks.
Core:
- KUnit tests for clk registration and fixed rate basic clk type
- A couple more devm helpers, one consumer and one provider
- Support for assigned-clock-rates-u64
New Drivers:
- Camera, display and GPU clocks on Qualcomm SM4450
- Camera clocks on Qualcomm SM8150
- Rockchip rk3576 clks
- Microchip SAM9X7 clks
- Renesas RZ/V2H(P) (R9A09G057) clks
Updates:
- Mark a bunch of struct freq_tbl const to reduce .data usage
- Add Qualcomm MSM8226 A7PLL and Regera PLL support
- Fix the Qualcomm Lucid 5LPE PLL configuration sequence to not reuse
Trion, as they do differ
- A number of fixes to the Qualcomm SM8550 display clock driver
- Fold Qualcomm SM8650 display clock driver into SM8550 one
- Add missing clocks and GDSCs needed for audio on Qualcomm MSM8998
- Add missing USB MP resets, GPLL9, and QUPv3 DFS to Qualcomm SC8180X
- Fix sdcc clk frequency tables on Qualcomm SC8180X
- Drop the Qualcomm SM8150 gcc_cpuss_ahb_clk_src
- Mark Qualcomm PCIe GDSCs as RET_ON on sm8250 and sm8540 to avoid
them turning off during suspend
- Use the HW_CTRL mechanism on Qualcomm SM8550 video clock controller
GDSCs
- Get rid of CLK_NR_CLKS defines in Rockchip DT binding headers
- Some fixes for Rockchip rk3228 and rk3588
- Exynos850: Add clock for Thermal Management Unit
- Exynos7885: Fix duplicated ID in the header, add missing TOP PLLs
and add clocks for USB block in the FSYS clock controller
- ExynosAutov9: Add DPUM clock controller
- ExynosAutov920: Add new (first) clock controllers: TOP and PERIC0
(and a bit more complete bindings)
- Use clk_hw pointer instead of fw_name for acm_aud_clk[0-1]_sel
clocks on i.MX8Q as parents in ACM provider
- Add i.MX95 NETCMIX support to the block control provider
- Fix parents for ENETx_REF_SEL clocks on i.MX6UL
- Add USB clocks, resets and power domains on Renesas RZ/G3S
- Add Generic Timer (GTM), I2C Bus Interface (RIIC), SD/MMC Host
Interface (SDHI) and Watchdog Timer (WDT) clocks and resets on
Renesas RZ/V2H
- Add PCIe, PWM, and CAN-FD clocks on Renesas R-Car V4M
- Add LCD controller clocks and resets on Renesas RZ/G2UL
- Add DMA clocks and resets on Renesas RZ/G3S
- Add fractional multiplication PLL support on Renesas R-Car Gen4
- Document support for the Renesas RZ/G2M v3.0 (r8a774a3) SoC
- Support for the Microchip SAM9X7 SoC as follows:
- Updates for the Microchip PLL drivers
- DT binding documentation updates (for the new clock driver and for
the slow clock controller that SAM9X7 is using)
- A fix for the Microchip SAMA7G5 clock driver to avoid allocating
more memory than necessary
- Constify some Amlogic structs
- Add SM1 eARC clocks for Amlogic
- Introduce a symbol namespace for Amlogic clock specific symbols
- Add reset controller support to audiomix block control on i.MX
- Add CLK_SET_RATE_PARENT flag to all audiomix clocks and to i.MX7D
lcdif_pixel_src clock
- Fix parent clocks for earc_phy and audpll on i.MX8MP
- Fix default parents for enet[12]_ref_sel on i.MX6UL
- Add ops in composite 8M and 93 that allow no-op on disable
- Add check for PCC present bit on composite 7ULP register
- Fix fractional part for fracn-gppll on prepare in i.MX
- Fix clock tree update for TF-A managed clocks on i.MX8M
- Drop CLK_SET_PARENT_GATE for DRAM mux on i.MX7D
- Add the SAI7 IPG clock for i.MX8MN
- Mark the 'nand_usdhc_bus' clock as non-critical on i.MX8MM
- Add LVDS bypass clocks on i.MX8QXP
- Add muxes for MIPI and PHY ref clocks on i.MX
- Reorder dc0_bypass0_clk, lcd_pxl and dc1_disp clocks on i.MX8QXP
- Add 1039.5MHz and 800MHz rates to fracn-gppll table on i.MX
- Add CLK_SET_RATE_PARENT for media_disp pixel clocks on i.MX8QXP
- Add some module descriptions to the i.MX generic and the i.MXRT1050
driver
- Fix return value for bypass for composite i.MX7ULP
- Move Mediatek clk bindings to clock/
- Convert some more clk bindings to dt schema"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (180 commits)
clk: Switch back to struct platform_driver::remove()
dt-bindings: clock, reset: fix top-comment indentation rk3576 headers
clk: rockchip: remove unused mclk_pdm0_p/pdm0_p definitions
clk: provide devm_clk_get_optional_enabled_with_rate()
clk: fixed-rate: add devm_clk_hw_register_fixed_rate_parent_data()
clk: imx6ul: fix clock parent for IMX6UL_CLK_ENETx_REF_SEL
clk: renesas: r9a09g057: Add clock and reset entries for GTM/RIIC/SDHI/WDT
clk: renesas: rzv2h: Add support for dynamic switching divider clocks
clk: renesas: r9a08g045: Add clocks, resets and power domains for USB
clk: rockchip: fix error for unknown clocks
clk: rockchip: rk3588: drop unused code
clk: rockchip: Add clock controller for the RK3576
clk: rockchip: Add new pll type pll_rk3588_ddr
dt-bindings: clock, reset: Add support for rk3576
dt-bindings: clock: rockchip,rk3588-cru: drop unneeded assigned-clocks
clk: rockchip: rk3588: Fix 32k clock name for pmu_24m_32k_100m_src_p
clk: imx95: enable the clock of NETCMIX block control
dt-bindings: clock: add RMII clock selection
dt-bindings: clock: add i.MX95 NETCMIX block control
clk: imx: imx8: Use clk_hw pointer for self registered clock in clk_parent_data
...
|
||
|
Linus Torvalds
|
4e2c9cd7dc |
i2c-for-6.12-rc1
I2C core
========
After 15 years of deprecation, the I2C_COMPAT symbol has finally been
removed. Also client addresses are now locked during initialization to
prevent race conditions between different kinds of instantiation. Scoped
foreach OF child loops are now used. And the testunit has received some
cleanups and documentation improvements as well as two new tests, one
for repeated start and one for triggering SMBusAlert interrupts.
I2C host drivers
================
The DesignWare and the Renesas I2C drivers have received most of
the changes in this pull request.
The first has has undergone through a series of cleanups that
have been sent to the mailing list a year ago for the first time
and finally get merged in this pull request. They are many, from
typos (e.g. i2/i2c), to cosmetics, to refactoring (e.g. move
inline functions to librarieas) and many others.
Besides that, all the DesignWare Kconfig options have been
grouped under the I2C_DESIGNWARE_CORE and this required some
adaptation in many of the kernel configuration files for
different arm and mips boards.
Follows the list of the rest of the changes grouped by type of
change.
Cleanups
--------
The Qualcomm Geni platform improves the exit path in the runtime
resume function.
The Intel LJCA driver loses "target_addr" parameter in
ljca_i2c_stop() because it was unused.
The MediaTek controller intializes the restart_flag in the
transfer function using the ternary conditional operator ("? :")
instead of initializing it in different parts.
Constified a few global data structures in the virtio driver.
The Renesas driver simplifies the bus speed handling in the init
function making it more readable.
Improved an if/else statement in probe function of the Renesas
R-Car driver.
The iMX/MXC driver switches to using the RUNTIME_PM_OPS() instead
of SET_RUNTIME_PM_OPS().
Still in the iMX/MXC driver a comma ',' has been replaced by a
semicolon ';', while in different drivers the ',' has been
removed from the '{ }' delimiters.
Finally three devm_clk_get_enabled() have been used to simplify
the devm_clk_get/clk_prepare_enable tuple in the Renesas EMEV2,
Ingenic and MPC drivers.
Refactors
---------
The Nuvoton fixes a potential out of boundary array access. This
is not a bug fix because the issue could never occur due to
hardware not having the properties listed in the array. The
change makes the driver more future proof and, at the same time,
silences code analyzers.
Improvements
------------
The Renesas I2C (riic) driver undergoes several patches improving
the runtime power management handling.
The Intel i801 driver uses a more descriptive adapter's name to
show the presence of the IDF feature.
In the Intel Denverton (ismt) adapter the pending transactions
are killed when irq's can't complete their handling, triggering a
timeout. This could have been considered as a bug fix, but
because, standing to Vasily, it's very sporadic, I preferred
considering the patch rather as an improvement.
New Feature
-----------
The Renesas I2C (riic) driver now supports the fast mode plus.
New support
-----------
Added support for:
- Renesas R9A08G045
- Rockchip RK3576
- KEBA I2C
- Theobroma Systems Mule Multiplexer.
The Keba comes with a new driver, i2c-keba.c.
The Mule is an i2c multiplexer and it also comes with a new
driver, mux/i2c-mux-mule.c.
Core patch
----------
This pull request includes also a patch in the I2C framework, in
i2c-core-base.c where the runtime PM functions have been replaced
in order to allow to be accessed during the device add.
Devicetree
----------
Some cleanups in the devicetree, as well. nVidia and Qualcomm
bindings improve their "if:then:" blocks. While the aspeed
binding loses the "multi-master" property because it was
redundant.
The i2c-sprd binding has been converted to YAML.
AT24 updates
============
- document a new model from giantec in DT bindings
-----BEGIN PGP SIGNATURE-----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=DTNY
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"I2C core:
- finally remove the I2C_COMPAT symbol after 15 years of deprecation
- lock client addresses during initialization to prevent race
conditions between different kinds of instantiation
- use scoped foreach OF child loops
- testunit cleanups and documentation improvements, as well as two
new tests, one for repeated start and one for triggering SMBusAlert
interrupts
I2C host drivers:
- DesignWare and Renesas I2C driver updates.
The first has has undergone through a series of cleanups that have
been sent to the mailing list a year ago for the first time and
finally get merged in this pull request. They are many, from typos
(e.g. i2/i2c), to cosmetics, to refactoring (e.g. move inline
functions to librarieas) and many others.
- all the DesignWare Kconfig options have been grouped under the
I2C_DESIGNWARE_CORE and this required some adaptation in many of
the kernel configuration files for different arm and mips boards
Cleanups:
- improve the exit path in the runtime resume function for the
Qualcomm Geni platform
- get rid of the unused "target_addr" parameter in the Intel LJCA
driver
- intialize the restart_flag in the MediaTek controller in one single
place
- constify a few global data structures in the virtio driver
- simplify the bus speed handling in the Renesas driver init function
making it more readable
- improved probe function of the Renesas R-Car driver
- switch the iMX/MXC driver to use RUNTIME_PM_OPS() instead of
SET_RUNTIME_PM_OPS()
- iMX/MXC driver cleanups
- use devm_clk_get_enabled() to simplify the Renesas EMEV2, Ingenic
and MPC drivers
Refactoring:
- Fix a potential out of boundary array access in the Nuvoton driver.
This is not a bug fix because the issue could never occur due to
hardware not having the properties listed in the array. The change
makes the driver more future proof and, at the same time, silences
code analyzers.
Improvements:
- several patches improving the runtime power management handling of
the Renesas I2C (riic) driver
- use a more descriptive adapter name in the Intel i801 driver to
show the presence of the IDF feature
- kill pending transactions when irq's can't complete their handling
in the Intel Denverton (ismt) driver, triggering a timeout
New Feature:
- support fast mode plus in the Renesas I2C (riic) driver
New support:
- Added support for:
- Renesas R9A08G045
- Rockchip RK3576
- KEBA I2C
- Theobroma Systems Mule Multiplexer.
- new i2c-keba.c driver
- new driver for The Mule i2c multiplexer
Core I2C framework:
- move runtime PM functions in order to allow them to be accessed
during device add
Devicetree:
- nVidia and Qualcomm binding improvements
- get rid of redundant "multi-master" property in the aspeed binding
- convert i2c-sprd binding to YAML
AT24 updates:
- document a new model from giantec in DT bindings"
* tag 'i2c-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (69 commits)
i2c: designware: Use pci_get_drvdata()
i2c: designware: Propagate firmware node
i2c: designware: Uninline i2c_dw_probe()
i2c: ljca: Remove unused "target_addr" parameter
i2c: keba: Add KEBA I2C controller support
i2c: i801: Use a different adapter-name for IDF adapters
i2c: core: Setup i2c_adapter runtime-pm before calling device_add()
dt-bindings: i2c: i2c-sprd: convert to YAML
i2c: ismt: kill transaction in hardware on timeout
i2c: designware: Group all DesignWare drivers under a single option
net: txgbe: Fix I2C Kconfig dependencies
RISC-V: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
mips: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
arm64: defconfig: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
ARM: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
ARC: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
i2c: virtio: Constify struct i2c_algorithm and struct virtio_device_id
i2c: rcar: tidyup priv->devtype handling on rcar_i2c_probe()
i2c: imx: Convert comma to semicolon
i2c: jz4780: Use devm_clk_get_enabled() helpers
...
|
||
|
Linus Torvalds
|
00b43f85f2 |
libnvdimm for 6.12
* Use Open Firmware helper routines * Fix memory leak when nvdimm labels are incorrect * remove some dead code -----BEGIN PGP SIGNATURE----- iIkEABYKADIWIQSgX9xt+GwmrJEQ+euebuN7TNx1MQUCZvCawRQcaXJhLndlaW55 QGludGVsLmNvbQAKCRCebuN7TNx1Mee0APdJJHx2GJtfKYyLCufjqbLkFvd6FXBQ h+KzGJuyXjIPAP9wlDdMA1uReR0jQ25zbTh1UKNIeaXH/rf5B/S2BTT3Cw== =7wOJ -----END PGP SIGNATURE----- Merge tag 'libnvdimm-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Ira Weiny: - use Open Firmware helper routines - fix memory leak when nvdimm labels are incorrect - remove some dead code * tag 'libnvdimm-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nvdimm: Remove dead code for ENODEV checking in scan_labels() nvdimm: Fix devs leaks in scan_labels() nvdimm: Use of_property_present() and of_property_read_bool() |
||
|
Linus Torvalds
|
20d9ba738b |
- Added a check for the return value of spi_setup() in the l4f00242t03 driver to catch errors.
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmbxjT8ACgkQUa+KL4f8 d2G9/g/+PkSH2AAcArhenm9KaCK0spyGrZ7Pdai7cF0nhUcTibh6T5MaOqBecPLd nPNZ27CLcLoKnBAPWmbE0FLNAX8OFudCAr114KpBkZe3eP7FhJ0uO/qEi+4Nbfhv t5Uef15sf7wnkLJq+rJFNqg1tMj9EqsAIQj85Z9G3e5m9BveCDlq675rFWmbByED pVwFtqF2kgI/F4Zdv8RSaExcRTz+q3k7jRTamFKS2V0SmhsWuy64Wz0O+fk3SWE5 jgopT/lGrN7K/cqnJfr++5kK012CwgOOqbgmbDEUfidbZkqsHOxKyjp5NdLykV2V vdHTAnmIVCanVd3yy7HSNafgCJkmonn2n9RMDEpIzhB6IfDN+kylqKFuhQ1/MwbS yfPQI4f+iHkSeVd85pEbCEeZuWMriwOBdiydqELs0FPhyZ9ezv4De+B9BKndlpuC JTzSgYvO4HqxsYGyTRIPmrd9zWSwfrxUFKLN4zYP3oCVQdLUVWh3JHWOQlWmds4e GyWnTfjpCK3FpjEVJZ8siS4Qbv5UzIQj+BsaoS5kkxkDL3GNOG4x+V6dm2FH6jbq po6K9cK3Zlxc5mfgGxvEsJ2DlIXpzQmrb2dsW5vR0UHjQAUapExIXlwlSYtgEybg sh8PHsTnbNa/5Uj6G/Cr9GTv3YZifS3EFrF06bMYjBcygnQJ1Uk= =9M/C -----END PGP SIGNATURE----- Merge tag 'backlight-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight update from Lee Jones: - Added a check for the return value of spi_setup() in the l4f00242t03 driver to catch errors * tag 'backlight-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: l4f00242t03: Add check for spi_setup |
||
|
Linus Torvalds
|
f2debe057f |
- Limited LED current based on thermal conditions in the QCOM flash LED driver.
- Fixed device child node usage in the BD2606MVV and PCA995x drivers. - Used device_for_each_child_node_scoped() to access child nodes in the IS31FL319X driver. - Reset the LED controller during the probe in the LM3601X driver. - Used device_for_each_child_node() to access device child nodes in the PCA995X driver. - Fixed CONFIG_LEDS_CLASS_MULTICOLOR dependency in the BlinkM driver. - Replaced msleep() with usleep_range() in the SUN50I-A100 driver. - Used scoped device node handling to simplify error paths in the AAT1290, KTD2692, and MC13783 drivers. - Added missing of_node_get for probe duration in the MAX77693 driver. - Simplified using for_each_available_child_of_node_scoped() loops when iterating over device nodes. - Used devm_clk_get_enabled() helpers in the LP55XX driver. - Converted DT bindings from TXT to YAML format for various drivers, including LM3692x and SC2731-BLTC. - Set num_leds after allocation in the GPIO driver. - Removed irrelevant blink configuration error message in the PCA9532 driver. - Fixed module autoloading with MODULE_DEVICE_TABLE() in the Turris Omnia driver. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmbxjRMACgkQUa+KL4f8 d2Ey+Q//WsNhqFE6YQmWIuqd9PznAb64o98JeWWymgM/W4DJkQPpVlK1+ceTWVCW OsE8017oiuqD1psK6dkAF+NGB85YUoCSHp1ymPrjN3BYFJfu95xLaHCt7qvKvsCu HR29dvscgubxwns5imxtbelwjSbQRxP+qfggyhwgpj6lQ0s5W2mSmKAU45zvnInI x4Hn/3cfqCkiJateqGj/tz49C/P2P1y3MXC9V3FBTQEWSsZt/BzMQvV/lxl0Ommn +5WAnBRmGN5/PhTpaIl/nD5XgSM3cnTA8rqz4EORQmr4X2nstAvsTj0KEXf8zs7g k/VcKmYnlraRJTIkC1kb8FalO7FsF+ubHxkMltEmvsNWEa2b5nhLEpH3RdA+U7B3 0PpSnO814ii8QuTvbALgwIre5N4kOn0oVS7FMIfDcNy2K4y/RP18xO5Qxc1f5Ssl eM/nOBoNISvuLzAnb3AZnMzJiHqiQlH7VW8bUnjb7FcIZqNaKllF5PXhSuSopSvi 9M9TrHjd7rZ9l7iBlj2Td7ZVNZ092TkwQcaPRyybIAONqWZ101UNlLL/Bxa0UNJ+ agExjqIQgGDHJCVQrXQAklGVFTgOwjx8qDcuY5r7CTwBEDKBwUQqbIdVa05e1eqq Y8mRc0Fao1sZh6ZG1GNFeaFh3aLLcrFMRIa/qqovciKXa/VoNXQ= =a/t6 -----END PGP SIGNATURE----- Merge tag 'leds-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds Pull LED updates from Lee Jones: - Limited LED current based on thermal conditions in the QCOM flash LED driver - Fixed device child node usage in the BD2606MVV and PCA995x drivers - Used device_for_each_child_node_scoped() to access child nodes in the IS31FL319X driver - Reset the LED controller during the probe in the LM3601X driver - Used device_for_each_child_node() to access device child nodes in the PCA995X driver - Fixed CONFIG_LEDS_CLASS_MULTICOLOR dependency in the BlinkM driver - Replaced msleep() with usleep_range() in the SUN50I-A100 driver - Used scoped device node handling to simplify error paths in the AAT1290, KTD2692, and MC13783 drivers - Added missing of_node_get for probe duration in the MAX77693 driver - Simplified using for_each_available_child_of_node_scoped() loops when iterating over device nodes - Used devm_clk_get_enabled() helpers in the LP55XX driver - Converted DT bindings from TXT to YAML format for various drivers, including LM3692x and SC2731-BLTC - Set num_leds after allocation in the GPIO driver - Removed irrelevant blink configuration error message in the PCA9532 driver - Fixed module autoloading with MODULE_DEVICE_TABLE() in the Turris Omnia driver * tag 'leds-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (38 commits) leds: turris-omnia: Fix module autoloading with MODULE_DEVICE_TABLE() leds: pca9532: Remove irrelevant blink configuration error message leds: gpio: Set num_leds after allocation dt-bindings: leds: Convert leds-lm3692x to YAML format leds: lp55xx: Use devm_clk_get_enabled() helpers leds: as3645a: Use device_* to iterate over device child nodes leds: qcom-lpg: Simplify with scoped for each OF child loop leds: turris-omnia: Simplify with scoped for each OF child loop leds: sc27xx: Simplify with scoped for each OF child loop leds: pca9532: Simplify with scoped for each OF child loop leds: netxbig: Simplify with scoped for each OF child loop leds: mt6323: Simplify with scoped for each OF child loop leds: mc13783: Use scoped device node handling to simplify error paths leds: lp55xx: Simplify with scoped for each OF child loop leds: is31fl32xx: Simplify with scoped for each OF child loop leds: bcm6358: Simplify with scoped for each OF child loop leds: bcm6328: Simplify with scoped for each OF child loop leds: aw2013: Simplify with scoped for each OF child loop leds: 88pm860x: Simplify with scoped for each OF child loop leds: max77693: Simplify with scoped for each OF child loop ... |
||
|
Linus Torvalds
|
b0a53b4f3f |
- Added support for the Analog Devices ADP5585 GPIO and PWM functions.
- Added parsing of GPIO hogs for the ADP5585. - Fixed module autoloading in the MAX14577 driver. - Simplified and cleaned up the CROS_EC driver. - Made the Lenovo Yoga Tab 3 X90F DMI match less strict in the INTEL_SOC_PMIC_CHTWC driver. - Added support for the RK806 PMIC on the I2C bus. - Removed the remaining header file for the DS1WM driver. - Added compatible strings for various devices in the device tree bindings. - Fixed a comma-related issue in the 88PM860X_CORE driver. - Constified read-only regmap structs in various drivers. - Used scoped variables with memory allocators to simplify error paths in the MT6360 and SYSCON drivers. - Added Intel Arrow Lake-H and Panther Lake LPSS PCI IDs. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmbxjKgACgkQUa+KL4f8 d2HO3A//Vj7h1R6noTl9Zc3fDzFvoTCnsPsIuH52AQHnk7E2ReCFbRwQeXW/aOTa QtvY+0LxYnhd/wUzS9ER4zQo5AP+mAk5OAb7oVnR6nL/RJdbWh+0tFu89YYn2oWi YeKxPA/SoD6wRnHFf7x2NXc12nbvNVJ7Yc5C8PALB+K41d2o6hs5dgn9DBe2kExY pn1FH/EMv2czg5B5PEDteOXcTEV+Q//hhNfBpeRbmF/qEIAIA/ZTDeKaFe2LOfEq z144v8m8TcJBwxXSg1KQhEyYdTcz+DtbIJ6YWr7ehllhXq/QPrlLIj0XBtgmPclm PaeOQFT007C/oFERSPA4+szwJFnOjkapE/ui5BwQ8BuXfvtp7IxwU8tHJHqO01bb ut/sVNtQcTZ9KplVa1m1JTKPKeoTWlfpo4B/2SMsnvDLKrvPQXtuFAKYSzusZWX0 oJtXGuSEJMQ/27jyxn209VDhdtAPIgLnFFxnoXoIOW7n2sTfeP4AjTFHUIzD2x/u ufxUQCM9hNvAz3nYEtdxSh2EVf0bY+Lzu318ce3Hpa/LgFRLH8lqL1IsO1C9ljF7 uPauDrDQCGmGEPD9x8bR4zRaEUj5qFTfeJHmbwh7xqjqzH9JKMiV6OMbAw2lHP9B D0KmsDEcQiU76uuBwRuqXonOfFqGmPGeYvluXXNbeM8st8H8Y34= =WuEO -----END PGP SIGNATURE----- Merge tag 'mfd-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: - Added support for the Analog Devices ADP5585 GPIO and PWM functions - Added parsing of GPIO hogs for the ADP5585 - Fixed module autoloading in the MAX14577 driver - Simplified and cleaned up the CROS_EC driver - Made the Lenovo Yoga Tab 3 X90F DMI match less strict in the INTEL_SOC_PMIC_CHTWC driver - Added support for the RK806 PMIC on the I2C bus - Removed the remaining header file for the DS1WM driver - Added compatible strings for various devices in the device tree bindings - Fixed a comma-related issue in the 88PM860X_CORE driver - Constified read-only regmap structs in various drivers - Used scoped variables with memory allocators to simplify error paths in the MT6360 and SYSCON drivers - Added Intel Arrow Lake-H and Panther Lake LPSS PCI IDs * tag 'mfd-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (44 commits) mfd: atc260x: Convert a bunch of commas to semicolons dt-bindings: mfd: qcom,tcsr: Add compatible for sa8775p mfd: intel-lpss: Add Intel Panther Lake LPSS PCI IDs mfd: intel-lpss: Add Intel Arrow Lake-H LPSS PCI IDs dt-bindings: mfd: syscon: Add rk3576 QoS register compatible dt-bindings: mfd: adp5585: Add parsing of hogs mfd: tc3589x: Drop vendorless compatible string from match table mfd: qcom-spmi-pmic: Use for_each_child_of_node_scoped() mfd: max77620: Use for_each_child_of_node_scoped() mfd: intel_soc_pmic_chtwc: Make Lenovo Yoga Tab 3 X90F DMI match less strict mfd: cros_ec: Update module description mfd: cros_ec: Simplify and clean-up cros_ec_dev_init() mfd: max14577: Provide MODULE_DEVICE_TABLE() to fix module autoloading mfd: rk8xx: Add support for rk806 on i2c bus dt-bindings: mfd: syscon: Add ti,j784s4-acspcie-proxy-ctrl compatible mfd: ds1wm: Remove remaining header file MAINTAINERS: Repair file entry in MARVELL 88PM886 PMIC DRIVER mfd: 88pm860x-core: Convert comma to semicolon mfd: syscon: Use scoped variables with memory allocators to simplify error paths mfd: mt6360: Use scoped variables with memory allocators to simplify error paths ... |
||
|
Linus Torvalds
|
8874d92b57 |
dmaengine updates for v6.12
New support: - Support for AMD Versal Gen 2 DMA IP - Rcar RZ/G3S SoC dma controller - Support for Intel Diamond Rapids and Granite Rapids-D dma controllers - Support for Freescale ls1021a-qdma controller - New driver for Loongson-1 APB DMA - New driver for AMD QDMA - Pl08x in LPC32XX router dma driver Updates: - Support for dpdma cyclic dma mode - XML conversion for marvell xor dma bindings - Dma clocks documentation for imx dma -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmbv/CAACgkQfBQHDyUj g0cEnRAAsv/rEDi47ku1dkbyOOfbhySj3/TyhOWs0eXPlJLrlMEC4b1i5QIP+Ldd ldzYIdlMLVbmFD+VfTOgqGY2qPgBTdahoCSaTH/GoiCV9OnKt2ImjoZ7KSWQjd90 Qtl8IQnuNBFMl3+DchU/EtGWA4+5dGM3y0p+TdIHxtf7z8Quos9XCp5QaTw8+4wg TMeQQKaoGjjm9aOBNwk9B9f3yqYB39ZmmqWfhII2395wrWulQYFsji6DnQhVcHrs EZ4w2lRIyqELszHSZ/8VPFfzyolsaDjTwC+1zZwVg8gFna2KOpZgRx1a16B+KZ7n w6BnMERLCTgkle9FQdhnzCeG8pZpk2YJT1OYLZHSH2XSHau9O7d9PSQ8mEwecDEz Iq3x0HfcZ5Cz2sansCwGTJQQpSvLqw74hybhhiFk6BQhEh3Bjq+7AjJvTQRGK2X8 w+v4e2hx7SpPCMIlXtdSf/1YhHil9897JS/nbAdYW2PflZhPSbDbH2c0hklab08K BdbriaAoT5XkQB0LKSDNHDcl+NxX0gph/geHpg2QD+JuJOydHR1El6nI2/d8Styj w07QKVCa/O46Bxz4AwQNIFOVL8JnygNTBjaJKof+6DX2/v4TikMcJYnVMj3i1fWB t/NsBzim1zliiGaZNiFoo3obzuzlYs2/yZ++dYZYY8oyLRGjJjM= =beF+ -----END PGP SIGNATURE----- Merge tag 'dmaengine-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "Unusually, more new driver and device support than updates. Couple of new device support, AMD, Rcar, Intel and New drivers in Freescale, Loonsoon, AMD and LPC32XX with DT conversion and mode updates etc. New support: - Support for AMD Versal Gen 2 DMA IP - Rcar RZ/G3S SoC dma controller - Support for Intel Diamond Rapids and Granite Rapids-D dma controllers - Support for Freescale ls1021a-qdma controller - New driver for Loongson-1 APB DMA - New driver for AMD QDMA - Pl08x in LPC32XX router dma driver Updates: - Support for dpdma cyclic dma mode - XML conversion for marvell xor dma bindings - Dma clocks documentation for imx dma" * tag 'dmaengine-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (24 commits) dmaengine: loongson1-apb-dma: Fix the build warning caused by the size of pdev_irqname dmaengine: Fix spelling mistakes dmaengine: Add dma router for pl08x in LPC32XX SoC dmaengine: fsl-edma: add edma src ID check at request channel dmaengine: fsl-edma: change to guard(mutex) within fsl_edma3_xlate() dmaengine: avoid non-constant format string dmaengine: imx-dma: Remove i.MX21 support dt-bindings: dma: fsl,imx-dma: Document the DMA clocks dmaengine: Loongson1: Add Loongson-1 APB DMA driver dt-bindings: dma: Add Loongson-1 APB DMA dmaengine: zynqmp_dma: Add support for AMD Versal Gen 2 DMA IP dt-bindings: dmaengine: zynqmp_dma: Add a new compatible string dmaengine: idxd: Add new DSA and IAA device IDs for Diamond Rapids platform dmaengine: idxd: Add a new DSA device ID for Granite Rapids-D platform dmaengine: ti: k3-udma: Remove unused declarations dmaengine: amd: qdma: Add AMD QDMA driver dmaengine: xilinx: dpdma: Add support for cyclic dma mode dma: ipu: Remove include/linux/dma/ipu-dma.h dt-bindings: dma: fsl-mxs-dma: Add compatible string "fsl,imx8qxp-dma-apbh" dt-bindings: fsl-qdma: allow compatible string fallback to fsl,ls1021a-qdma ... |
||
|
Linus Torvalds
|
fbb86b0d5f |
phy-for-6.12
- New Support
- Rcar usb2 support for RZ/G3S SoC
- Nuvoton MA35 SoC USB 2.0 PHY driver
- Removal
- obsolete qcom,usb-8x16-phy bindings
- Updates
- 4 lane PCIe support for Qualcomm X1E80100
- Constify structure in subsystem update
- Subsystem simplification with scoped for each OF child loop update
- Yaml conversion for Qualcomm sata phy, Hiilicon hi3798cv200-combphy
bindings
-----BEGIN PGP SIGNATURE-----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=XJmz
-----END PGP SIGNATURE-----
Merge tag 'phy-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"New hw support:
- Rcar usb2 support for RZ/G3S SoC
- Nuvoton MA35 SoC USB 2.0 PHY driver
Removed:
- obsolete qcom,usb-8x16-phy bindings
Updates:
- 4 lane PCIe support for Qualcomm X1E80100
- Constify structure in subsystem update
- Subsystem simplification with scoped for each OF child loop update
- Yaml conversion for Qualcomm sata phy, Hiilicon hi3798cv200-combphy
bindings"
* tag 'phy-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (40 commits)
phy: renesas: rcar-gen3-usb2: Add support for the RZ/G3S SoC
dt-bindings: phy: renesas,usb2-phy: Document RZ/G3S phy bindings
phy: renesas: rcar-gen3-usb2: Add support to initialize the bus
phy: ti: j721e-wiz: Simplify with scoped for each OF child loop
phy: ti: j721e-wiz: Drop OF node reference earlier for simpler code
phy: ti: gmii-sel: Simplify with dev_err_probe()
phy: ti: am654-serdes: Use scoped device node handling to simplify error paths
phy: qcom: qmp-pcie-msm8996: Simplify with scoped for each OF child loop
phy: mediatek: xsphy: Simplify with scoped for each OF child loop
phy: mediatek: tphy: Simplify with scoped for each OF child loop
phy: hisilicon: usb2: Simplify with scoped for each OF child loop
phy: cadence: sierra: Simplify with scoped for each OF child loop
phy: broadcom: brcm-sata: Simplify with scoped for each OF child loop
phy: broadcom: bcm-cygnus-pcie: Simplify with scoped for each OF child loop
phy: nuvoton: add new driver for the Nuvoton MA35 SoC USB 2.0 PHY
dt-bindings: phy: nuvoton,ma35-usb2-phy: add new bindings
phy: qcom: qmp-pcie: Configure all tables on port B PHY
phy: airoha: adjust initialization delay in airoha_pcie_phy_init()
dt-bindings: phy: socionext,uniphier: add top-level constraints
phy: qcom: qmp-pcie: Add Gen4 4-lanes mode for X1E80100
...
|
||
|
Linus Torvalds
|
7116747a68 |
soundwire updates for 6.12
- bus cleanup for warnings and probe deferral errors suppression - cadence recheck for status with a delayed work - intel interrupt rework on reset exit -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmbv9W8ACgkQfBQHDyUj g0cZqxAAjsXmwjky3zGs8vuC8hFfTJ4nI9NGW0pPKcYlTLDCGfN49/caL0X+BYvE 12x+tHyKa3H29as5CDkS/NkmtBGI27V3wcdOTQEv9OXvv1G/Kc8sfB5wJZS2deec 41EvSu/If1qqQaNXoooI3s63S23SE22vxE6RtN7UNRKlgXs/5qjIVPhdYSUcXiCl gl7wG/NgyfMwH17LCY2W1l2/BSP7XKRBny+cT8dzNR1muaZn8Noi3RiIzI+eEWVv ldHHkc5yTrCYVsi/xW9oDmUJJ4IKZU1TBGAbtOe/EtaJuMyjOCVClfTG96WQrpFl 0gDS7qlGjD0tf8RVn4QLVV68ZVXI6EYPUrv2+Z9f8swf21RLKEjx5aflxktzEwPY SDPvRhpXa5FjmHt7yhVMLXV1u4CyNWepeEcbmZgsll8zrAXwIcltH8NDicURdzqK UHzQFG3LPHrlnC5zBsFpRXFoC8VDa//1kr6vEsXvnY1ehMRUa6+Hvy+1+7q5Syyj ffmhzlw1dJcjnQC1l5xYejPzXi0kw/eAsr0eQ+aumVjDm/2BV/UJbnQ4Pj+l4lAU b9+K6R+ZxC+XZYE4CZtlT/Jtx2Q8Ncp41XA3ErZSUpEJgFzpWCd+C1u/gYzghoUx X0JaX4XzrUtlCvBw8px/NirG8jy36NqvKnoNLkFS/PUMQ74dcmg= =Xwb2 -----END PGP SIGNATURE----- Merge tag 'soundwire-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire Pull soundwire updates from Vinod Koul: - bus cleanup for warnings and probe deferral errors suppression - cadence recheck for status with a delayed work - intel interrupt rework on reset exit * tag 'soundwire-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: intel_bus_common: enable interrupts before exiting reset soundwire: cadence: re-check Peripheral status with delayed_work soundwire: bus: clean up probe warnings soundwire: bus: drop unused driver name field soundwire: bus: suppress probe deferral errors |
||
|
Linus Torvalds
|
f34c512521 |
linux-watchdog 6.12-rc1 tag
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (GNU/Linux) iEYEABECAAYFAmbv6AcACgkQ+iyteGJfRsqKdgCgr3VyhlkM+ryZtxnYl02midaC Yp4An2baWN7fzdJWgj11coglnM/mpGvG =J3w7 -----END PGP SIGNATURE----- Merge tag 'linux-watchdog-6.12-rc1' of git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - Add Watchdog Timer driver for RZ/V2H(P) - Add Cirrus EP93x - Some small fixes and improvements * tag 'linux-watchdog-6.12-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: Convert comma to semicolon watchdog: rzv2h_wdt: Add missing MODULE_LICENSE tag to fix modpost error dt-bindings: watchdog: Add Cirrus EP93x dt-bindings: watchdog: stm32-iwdg: Document interrupt and wakeup properties drivers: watchdog: marvell_gti: Convert comma to semicolon watchdog: iTCO_wdt: Convert comma to semicolon watchdog: Add Watchdog Timer driver for RZ/V2H(P) dt-bindings: watchdog: renesas,wdt: Document RZ/V2H(P) SoC watchdog: imx_sc_wdt: detect if already running watchdog: imx2_wdt: Remove __maybe_unused notations watchdog: imx_sc_wdt: Don't disable WDT in suspend watchdog: imx7ulp_wdt: move post_rcs_wait into struct imx_wdt_hw_feature |
||
|
Linus Torvalds
|
962ad08780 |
This is the bulk of pin control changes for the v6.12 kernel cycle:
Core changes:
- Add support for "input-schmitt-microvolt" property, as used in the
Sophgo SoC.
New drivers:
- Mobileye EyeQ5 pin controller, I think this is an automotive SoC.
- Rockchip rk3576 pin control support.
- Sophgo CV1800 series pin controllers: CV1800B, CV1812H and SG2000.
Improvements:
- Gradual improvements to Renesas, Samsung, Qualcomm, Nuvoton
and a few other drivers.
-----BEGIN PGP SIGNATURE-----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=7uZC
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Core changes:
- Add support for "input-schmitt-microvolt" property, as used in the
Sophgo SoC
New drivers:
- Mobileye EyeQ5 pin controller, I think this is an automotive SoC
- Rockchip rk3576 pin control support
- Sophgo CV1800 series pin controllers: CV1800B, CV1812H and SG2000
Improvements:
- Gradual improvements to Renesas, Samsung, Qualcomm, Nuvoton and a
few other drivers"
* tag 'pinctrl-v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (67 commits)
pinctrl: intel: Constify struct intel_pinctrl parameter
pinctrl: Remove redundant null pointer checks in pinctrl_remove_device_debugfs()
pinctrl: baytrail: Drop duplicate return statement
pinctrl: intel: Inline intel_gpio_community_irq_handler()
dt-bindings: pinctrl: qcom: add missing type to GPIO hogs
pinctrl: madera: Simplify with dev_err_probe()
pinctrl: k210: Use devm_clk_get_enabled() helpers
pinctrl: Join split messages and remove double whitespace
pinctrl: renesas: rzg2l: Move pinconf_to_config_argument() call outside of switch cases
pinctrl: renesas: rzg2l: Introduce single macro for digital noise filter configuration
pinctrl: renesas: rzg2l: Replace of_node_to_fwnode() with more suitable API
pinctrl: mvebu: Fix devinit_dove_pinctrl_probe function
pinctrl: sunxi: Use devm_clk_get_enabled() helpers
pinctrl: sophgo: cv18xx: fix missed __iomem type identifier
pinctrl: stmfx: Use string_choices API instead of ternary operator
pinctrl: nomadik: Use kmemdup_array instead of kmemdup for multiple allocation
pinctrl: intel: Introduce for_each_intel_gpio_group() helper et al.
pinctrl: intel: Constify intel_get_community() returned object
pinctrl: intel: Implement high impedance support
pinctrl: intel: Add __intel_gpio_get_direction() helper
...
|
||
|
Linus Torvalds
|
5f153b6330 |
Bug fixes for intel ntb driver debugfs, use after free in switchtec
driver, ntb transport rx ring buffers. Also, cleanups in printks, kernel-docs, and idt driver comment. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEoE9b9c3U2JxX98mqbmZLrHqL0iMFAmbtj00ACgkQbmZLrHqL 0iNH6A/+JzxP8uH8FK4yUM6EFtT03gFZvuhYZ80JnjHWk19mu/zxzdm3uwZ5DZ5h utOz7lHn2mljkq2y+rLTDyZqcpkRQgS1jsGSOdv/NnR6kZ6+siGl01sjYXUbv2+9 eUyyLcq1CksLCqjCEc5WYARo84JIxugDxkEpAS0JZRZSU7DvrvGz0bmuEyLnaFY/ HVi4bwmCS+/m13tJeh2f+OpNZkw8yt/pE8miYsmyJM/YUhFVr7hflOGo0ObtuG15 csvyIx7sPVuRr7ecA6kfcAR6cRf5lMuaW7twuGywU2bnJ5UvQtn2lolB4qR6yg04 L3QYnx/PMUpUe7RhuEmEylib4TistsIRH0+N+YLBnCaeqVF/UM372fo8g6U4iytV AnqAo+YfKNb92i1I+XdlqfT/u/HD+o6bXpbj1H+dxgKHrwqiqLT05TFn9kYCQdz+ sNsE2S8JivqL3MmLlnk57v93CVW3/b5kewsjRwF/NsW2Eb75WCuEbmGi3aDRU20F DRBUxYDR2o15f4aK1jDYA6R7hDO7b6233VNWssNudypKPTCP6L8GRaMiwyiLaz8m 7g2I0f2lmcYPR0FGoLaM+DA3z9a7fM8I5ynkWkbrmOsyZM1aaXMVEj/uvmSkeSHa bpZYQYNrL4g4mwofGH+dGeGtQNkCyLZL1lGhVWDjsoiWl+qWClk= =lFRT -----END PGP SIGNATURE----- Merge tag 'ntb-6.12' of https://github.com/jonmason/ntb Pull PCIe non-transparent bridge updates from Jon Mason: "Bug fixes for intel ntb driver debugfs, use after free in switchtec driver, ntb transport rx ring buffers. Also, cleanups in printks, kernel-docs, and idt driver comment" * tag 'ntb-6.12' of https://github.com/jonmason/ntb: ntb: Force physically contiguous allocation of rx ring buffers ntb: ntb_hw_switchtec: Fix use after free vulnerability in switchtec_ntb_remove due to race condition ntb: idt: Fix the cacography in ntb_hw_idt.c NTB: epf: don't misuse kernel-doc marker NTB: ntb_transport: fix all kernel-doc warnings ntb: Constify struct bus_type ntb_perf: Fix printk format ntb: intel: Fix the NULL vs IS_ERR() bug for debugfs_create_dir() |
||
|
Linus Torvalds
|
d7dfb07d4d |
firewire updates for v6.12
The batch of changes includes the followwing:
- Replacing tasklet with usual workqueue for isochronous context
- Replacing IDR with XArray
- Utilizing guard macro where possible
- Printing deprecation warning when enabling debug parameter of
firewire-ohci module
Additionally, it includes a single patch for sound subsystem which the
subsystem maintainer acked:
- Switching to nonatomic PCM operation
In FireWire subsystem, tasklet has been used as the bottom half of 1394
OHCi hardIRQ so long. In the recent kernel updates, BH workqueue has
been available, and some developers have proposed replacing tasklet with
BH workqueue. While it is fortunate that developers are still considering
the legacy subsystem, a simple replacement is not necessarily suitable.
As a first step towards dropping tasklet, I've investigated the
feasibility for 1394 OHCI isochronous context, and concluded that usual
workqueue is available. In the context, the batch of packets is processed
in the specific queue, thus the timing jitter caused by task scheduling is
not so critical. Additionally, DMA transmission can be scheduled
per-packet basis, therefore the context can be sleep between the operation
of transmissions. Furthermore, in-kernel protocol implementation involves
some CPU-bound tasks, which can sometimes consumes CPU time so long. These
characteristics suggest that usual workqueue is suitable, through BH
workqueues are not.
The replacement with usual workqueue allows unit drivers to process the
content of packets in non-atomic context. It brings some reliefs to some
drivers in sound subsystem that spin-lock is not mandatory anymore during
isochronous packet processing.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCZu41yQAKCRCsLtaWM8Lw
E4Y1AP43vZatH202NNMnbkLSW9axmHe6VHWEwDSsJT80vTbBNAD/WYV62EoQzlk1
1lzdts11SSqYPhj6tJDuRgqULlNAows=
=7VMx
-----END PGP SIGNATURE-----
Merge tag 'firewire-updates-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire updates from Takashi Sakamoto:
"In the FireWire subsystem, tasklets have been used as the bottom half
of 1394 OHCi hardIRQ. In recent kernel updates, BH workqueues have
become available, and some developers have proposed replacing the
tasklet with a BH workqueue.
As a first step towards dropping tasklet use, the 1394 OHCI
isochronous context can use regular workqueues. In this context, the
batch of packets is processed in the specific queue, thus the timing
jitter caused by task scheduling is not so critical.
Additionally, DMA transmission can be scheduled per-packet basis,
therefore the context can be sleep between the operation of
transmissions. Furthermore, in-kernel protocol implementation involves
some CPU-bound tasks, which can sometimes consumes CPU time so long.
These characteristics suggest that normal workqueues are suitable,
through BH workqueues are not.
The replacement with a workqueue allows unit drivers to process the
content of packets in non-atomic context. It brings some reliefs to
some drivers in sound subsystem that spin-lock is not mandatory
anymore during isochronous packet processing.
Summary:
- Replace tasklet with workqueue for isochronous context
- Replace IDR with XArray
- Utilize guard macro where possible
- Print deprecation warning when enabling debug parameter of
firewire-ohci module
- Switch to nonatomic PCM operation"
* tag 'firewire-updates-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: (55 commits)
firewire: core: rename cause flag of tracepoints event
firewire: core: update documentation of kernel APIs for flushing completions
firewire: core: add helper function to retire descriptors
Revert "firewire: core: move workqueue handler from 1394 OHCI driver to core function"
Revert "firewire: core: use mutex to coordinate concurrent calls to flush completions"
firewire: core: use mutex to coordinate concurrent calls to flush completions
firewire: core: move workqueue handler from 1394 OHCI driver to core function
firewire: core: fulfill documentation of fw_iso_context_flush_completions()
firewire: core: expose kernel API to schedule work item to process isochronous context
firewire: core: use WARN_ON_ONCE() to avoid superfluous dumps
ALSA: firewire: use nonatomic PCM operation
firewire: core: non-atomic memory allocation for isochronous event to user client
firewire: ohci: operate IT/IR events in sleepable work process instead of tasklet softIRQ
firewire: core: add local API to queue work item to workqueue specific to isochronous contexts
firewire: core: allocate workqueue to handle isochronous contexts in card
firewire: ohci: obsolete direct usage of printk_ratelimit()
firewire: ohci: deprecate debug parameter
firewire: core: update fw_device outside of device_find_child()
firewire: ohci: fix error path to detect initiated reset in TI TSB41BA3D phy
firewire: core/ohci: minor refactoring for computation of configuration ROM size
...
|
||
|
Linus Torvalds
|
3a37872316 |
pci-v6.12-changes
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmbseugUHGJoZWxnYWFz
QGdvb2dsZS5jb20ACgkQWYigwDrT+vxdwxAAvdvDyTuiPo2R8pQtvKg4YL2IUnK5
UR28mBxZDK5DFhLtD/QzmVVG/eaLY6bJHthHgJgTApzekkqU0h9dcRI0eegXrvcz
I3HRsZK2yatUky9l8O148OLzF897r7vXL3QtGe6qjKU+9D83IEeooLKgBca+GoBC
bRLvG/fYRzdjOe8UHFqCoeMIg3IOY7CNifvFOihAGpJpxfZQktj6hSKu6q7BL1Rx
NRgYlxh0eLcb7vAJqz6RZpQ8PRCwhAjlDuu0BOkES8/6EwisD1xUh3qdDxfVgNA6
FpcAb/53yr46cs4tM9ZTwluka86AskuXj3jwSKf7nE3zqr4nM9OD3sGOSYzK8UdE
EDBKj+9iEpYRC6rJMk5gNH2AZkR1OEpNUisR6+kEn81A9yNNoTmkHdHUOWo8TuxD
btc0sTM+eWApvTiZwgL4VjMZulQllV51K8tcfvODRhlMkbOPNWGWdmpWqEbUS2HU
i7+zzQC3DC5iPlAKgRSeYB0aad6la6brqPW16sGhGovNhgwbzakDLCUJJGn/LNuO
wd0UNpJTnHlfChbvNh2bBxiMOo0cab1tJ5Jp97STQYhLg2nW93s/dAfdpSAsYO4S
5YzjSADWeyeuDsHE1RdUdDvYAPMb1VZBUd2OSHis5zw7kmh25c9KYXEkDJ25q/ju
sVXK4oMNW/Gnd5M=
=L3s9
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Wait for device readiness after reset by polling Vendor ID and
looking for Configuration RRS instead of polling the Command
register and looking for non-error completions, to avoid hardware
retries done for RRS on non-Vendor ID reads (Bjorn Helgaas)
- Rename CRS Completion Status to RRS ('Request Retry Status') to
match PCIe r6.0 spec usage (Bjorn Helgaas)
- Clear LBMS bit after a manual link retrain so we don't try to
retrain a link when there's no downstream device anymore (Maciej W.
Rozycki)
- Revert to the original link speed after retraining fails instead of
leaving it restricted to 2.5GT/s, so a future device has a chance
to use higher speeds (Maciej W. Rozycki)
- Wait for each level of downstream bus, not just the first, to
become accessible before restoring devices on that bus (Ilpo
Järvinen)
- Add ARCH_PCI_DEV_GROUPS so s390 can add its own attribute_groups
without having to stomp on the core's pdev->dev.groups (Lukas
Wunner)
Driver binding:
- Export pcim_request_region(), a managed counterpart of
pci_request_region(), for use by drivers (Philipp Stanner)
- Export pcim_iomap_region() and deprecate pcim_iomap_regions()
(Philipp Stanner)
- Request the PCI BAR used by xboxvideo (Philipp Stanner)
- Request and map drm/ast BARs with pcim_iomap_region() (Philipp
Stanner)
MSI:
- Add MSI_FLAG_NO_AFFINITY flag for devices that mux MSIs onto a
single IRQ line and cannot set the affinity of each MSI to a
specific CPU core (Marek Vasut)
- Use MSI_FLAG_NO_AFFINITY and remove unnecessary .irq_set_affinity()
implementations in aardvark, altera, brcmstb, dwc, mediatek-gen3,
mediatek, mobiveil, plda, rcar, tegra, vmd, xilinx-nwl,
xilinx-xdma, and xilinx drivers to avoid 'IRQ: set affinity failed'
warnings (Marek Vasut)
Power management:
- Add pwrctl support for ATH11K inside the WCN6855 package (Konrad
Dybcio)
PCI device hotplug:
- Remove unnecessary hpc_ops struct from shpchp (ngn)
- Check for PCI_POSSIBLE_ERROR(), not 0xffffffff, in cpqphp
(weiyufeng)
Virtualization:
- Mark Creative Labs EMU20k2 INTx masking as broken (Alex Williamson)
- Add an ACS quirk for Qualcomm SA8775P, which doesn't advertise ACS
but does provide ACS-like features (Subramanian Ananthanarayanan)
IOMMU:
- Add function 0 DMA alias quirk for Glenfly Arise audio function,
which uses the function 0 Requester ID (WangYuli)
NPEM:
- Add Native PCIe Enclosure Management (NPEM) support for sysfs
control of NVMe RAID storage indicators (ok/fail/locate/
rebuild/etc) (Mariusz Tkaczyk)
- Add support for the ACPI _DSM PCIe SSD status LED management, which
is functionally similar to NPEM but mediated by platform firmware
(Mariusz Tkaczyk)
Device trees:
- Drop minItems and maxItems from ranges in PCI generic host binding
since host bridges may have several MMIO and I/O port apertures
(Frank Li)
- Add kirin, rcar-gen2, uniphier DT binding top-level constraints for
clocks (Krzysztof Kozlowski)
Altera PCIe controller driver:
- Convert altera DT bindings from text to YAML (Matthew Gerlach)
- Replace TLP_REQ_ID() with macro PCI_DEVID(), which does the same
thing and is what other drivers use (Jinjie Ruan)
Broadcom STB PCIe controller driver:
- Add DT binding maxItems for reset controllers (Jim Quinlan)
- Use the 'bridge' reset method if described in the DT (Jim Quinlan)
- Use the 'swinit' reset method if described in the DT (Jim Quinlan)
- Add 'has_phy' so the existence of a 'rescal' reset controller
doesn't imply software control of it (Jim Quinlan)
- Add support for many inbound DMA windows (Jim Quinlan)
- Rename SoC 'type' to 'soc_base' express the fact that SoCs come in
families of multiple similar devices (Jim Quinlan)
- Add Broadcom 7712 DT description and driver support (Jim Quinlan)
- Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings for
maintainability (Bjorn Helgaas)
Freescale i.MX6 PCIe controller driver:
- Add imx6q-pcie 'dbi2' and 'atu' reg-names for i.MX8M Endpoints
(Richard Zhu)
- Fix a code restructuring error that caused i.MX8MM and i.MX8MP
Endpoints to fail to establish link (Richard Zhu)
- Fix i.MX8MP Endpoint occasional failure to trigger MSI by enforcing
outbound alignment requirement (Richard Zhu)
- Call phy_power_off() in the .probe() error path (Frank Li)
- Rename internal names from imx6_* to imx_* since i.MX7/8/9 are also
supported (Frank Li)
- Manage Refclk by using SoC-specific callbacks instead of switch
statements (Frank Li)
- Manage core reset by using SoC-specific callbacks instead of switch
statements (Frank Li)
- Expand comments for erratum ERR010728 workaround (Frank Li)
- Use generic PHY APIs to configure mode, speed, and submode, which
is harmless for devices that implement their own internal PHY
management and don't set the generic imx_pcie->phy (Frank Li)
- Add i.MX8Q (i.MX8QM, i.MX8QXP, and i.MX8DXL) DT binding and driver
Root Complex support (Richard Zhu)
Freescale Layerscape PCIe controller driver:
- Replace layerscape-pcie DT binding compatible fsl,lx2160a-pcie with
fsl,lx2160ar2-pcie (Frank Li)
- Add layerscape-pcie DT binding deprecated 'num-viewport' property
to address a DT checker warning (Frank Li)
- Change layerscape-pcie DT binding 'fsl,pcie-scfg' to phandle-array
(Frank Li)
Loongson PCIe controller driver:
- Increase max PCI hosts to 8 for Loongson-3C6000 and newer chipsets
(Huacai Chen)
Marvell Aardvark PCIe controller driver:
- Fix issue with emulating Configuration RRS for two-byte reads of
Vendor ID; previously it only worked for four-byte reads (Bjorn
Helgaas)
MediaTek PCIe Gen3 controller driver:
- Add per-SoC struct mtk_gen3_pcie_pdata to support multiple SoC
types (Lorenzo Bianconi)
- Use reset_bulk APIs to manage PHY reset lines (Lorenzo Bianconi)
- Add DT and driver support for Airoha EN7581 PCIe controller
(Lorenzo Bianconi)
Qualcomm PCIe controller driver:
- Update qcom,pcie-sc7280 DT binding with eight interrupts (Rayyan
Ansari)
- Add back DT 'vddpe-3v3-supply', which was incorrectly removed
earlier (Johan Hovold)
- Drop endpoint redundant masking of global IRQ events (Manivannan
Sadhasivam)
- Clarify unknown global IRQ message and only log it once to avoid a
flood (Manivannan Sadhasivam)
- Add 'linux,pci-domain' property to endpoint DT binding (Manivannan
Sadhasivam)
- Assign PCI domain number for endpoint controllers (Manivannan
Sadhasivam)
- Add 'qcom_pcie_ep' and the PCI domain number to IRQ names for
endpoint controller (Manivannan Sadhasivam)
- Add global SPI interrupt for PCIe link events to DT binding
(Manivannan Sadhasivam)
- Add global RC interrupt handler to handle 'Link up' events and
automatically enumerate hot-added devices (Manivannan Sadhasivam)
- Avoid mirroring of DBI and iATU register space so it doesn't
overlap BAR MMIO space (Prudhvi Yarlagadda)
- Enable controller resources like PHY only after PERST# is
deasserted to partially avoid the problem that the endpoint SoC
crashes when accessing things when Refclk is absent (Manivannan
Sadhasivam)
- Add 16.0 GT/s equalization and RX lane margining settings (Shashank
Babu Chinta Venkata)
- Pass domain number to pci_bus_release_domain_nr() explicitly to
avoid a NULL pointer dereference (Manivannan Sadhasivam)
Renesas R-Car PCIe controller driver:
- Make the read-only const array 'check_addr' static (Colin Ian King)
- Add R-Car V4M (R8A779H0) PCIe host and endpoint to DT binding
(Yoshihiro Shimoda)
TI DRA7xx PCIe controller driver:
- Request IRQF_ONESHOT for 'dra7xx-pcie-main' IRQ since the primary
handler is NULL (Siddharth Vadapalli)
- Handle IRQ request errors during root port and endpoint probe
(Siddharth Vadapalli)
TI J721E PCIe driver:
- Add DT 'ti,syscon-acspcie-proxy-ctrl' and driver support to enable
the ACSPCIE module to drive Refclk for the Endpoint (Siddharth
Vadapalli)
- Extract the cadence link setup from cdns_pcie_host_setup() so link
setup can be done separately during resume (Thomas Richard)
- Add T_PERST_CLK_US definition for the mandatory delay between
Refclk becoming stable and PERST# being deasserted (Thomas Richard)
- Add j721e suspend and resume support (Théo Lebrun)
TI Keystone PCIe controller driver:
- Fix NULL pointer checking when applying MRRS limitation quirk for
AM65x SR 1.0 Errata #i2037 (Dan Carpenter)
Xilinx NWL PCIe controller driver:
- Fix off-by-one error in INTx IRQ handler that caused INTx
interrupts to be lost or delivered as the wrong interrupt (Sean
Anderson)
- Rate-limit misc interrupt messages (Sean Anderson)
- Turn off the clock on probe failure and device removal (Sean
Anderson)
- Add DT binding and driver support for enabling/disabling PHYs (Sean
Anderson)
- Add PCIe phy bindings for the ZCU102 (Sean Anderson)
Xilinx XDMA PCIe controller driver:
- Add support for Xilinx QDMA Soft IP PCIe Root Port Bridge to DT
binding and xilinx-dma-pl driver (Thippeswamy Havalige)
Miscellaneous:
- Fix buffer overflow in kirin_pcie_parse_port() (Alexandra Diupina)
- Fix minor kerneldoc issues and typos (Bjorn Helgaas)
- Use PCI_DEVID() macro in aer_inject() instead of open-coding it
(Jinjie Ruan)
- Check pcie_find_root_port() return in x86 fixups to avoid NULL
pointer dereferences (Samasth Norway Ananda)
- Make pci_bus_type constant (Kunwu Chan)
- Remove unused declarations of __pci_pme_wakeup() and
pci_vpd_release() (Yue Haibing)
- Remove any leftover .*.cmd files with make clean (zhang jiao)
- Remove unused BILLION macro (zhang jiao)"
* tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (132 commits)
PCI: Fix typos
dt-bindings: PCI: qcom: Allow 'vddpe-3v3-supply' again
tools: PCI: Remove unused BILLION macro
tools: PCI: Remove .*.cmd files with make clean
PCI: Pass domain number to pci_bus_release_domain_nr() explicitly
PCI: dra7xx: Fix error handling when IRQ request fails in probe
PCI: dra7xx: Fix threaded IRQ request for "dra7xx-pcie-main" IRQ
PCI: qcom: Add RX lane margining settings for 16.0 GT/s
PCI: qcom: Add equalization settings for 16.0 GT/s
PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed
PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed'
PCI: qcom-ep: Enable controller resources like PHY only after refclk is available
PCI: Mark Creative Labs EMU20k2 INTx masking as broken
dt-bindings: PCI: imx6q-pcie: Add reg-name "dbi2" and "atu" for i.MX8M PCIe Endpoint
dt-bindings: PCI: altera: msi: Convert to YAML
PCI: imx6: Add i.MX8Q PCIe Root Complex (RC) support
PCI: Rename CRS Completion Status to RRS
PCI: aardvark: Correct Configuration RRS checking
PCI: Wait for device readiness with Configuration RRS
PCI: brcmstb: Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings
...
|
||
|
Linus Torvalds
|
18ba603446 |
NFSD 6.12 Release Notes
Notable features of this release include:
- Pre-requisites for automatically determining the RPC server thread
count
- Clean-up and preparation for supporting LOCALIO, which will be
merged via the NFS client tree
- Enhancements and fixes to NFSv4.2 COPY offload
- A new Python-based tool for generating kernel SunRPC XDR encoding
and decoding functions, added as an aid for prototyping features
in protocols based on the Linux kernel's SunRPC implementation.
As always I am grateful to the NFSD contributors, reviewers,
testers, and bug reporters who participated during this cycle.
-----BEGIN PGP SIGNATURE-----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=Ybsc
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"Notable features of this release include:
- Pre-requisites for automatically determining the RPC server thread
count
- Clean-up and preparation for supporting LOCALIO, which will be
merged via the NFS client tree
- Enhancements and fixes to NFSv4.2 COPY offload
- A new Python-based tool for generating kernel SunRPC XDR encoding
and decoding functions, added as an aid for prototyping features in
protocols based on the Linux kernel's SunRPC implementation
As always I am grateful to the NFSD contributors, reviewers, testers,
and bug reporters who participated during this cycle"
* tag 'nfsd-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (57 commits)
xdrgen: Prevent reordering of encoder and decoder functions
xdrgen: typedefs should use the built-in string and opaque functions
xdrgen: Fix return code checking in built-in XDR decoders
tools: Add xdrgen
nfsd: fix delegation_blocked() to block correctly for at least 30 seconds
nfsd: fix initial getattr on write delegation
nfsd: untangle code in nfsd4_deleg_getattr_conflict()
nfsd: enforce upper limit for namelen in __cld_pipe_inprogress_downcall()
nfsd: return -EINVAL when namelen is 0
NFSD: Wrap async copy operations with trace points
NFSD: Clean up extra whitespace in trace_nfsd_copy_done
NFSD: Record the callback stateid in copy tracepoints
NFSD: Display copy stateids with conventional print formatting
NFSD: Limit the number of concurrent async COPY operations
NFSD: Async COPY result needs to return a write verifier
nfsd: avoid races with wake_up_var()
nfsd: use clear_and_wake_up_bit()
sunrpc: xprtrdma: Use ERR_CAST() to return
NFSD: Annotate struct pnfs_block_deviceaddr with __counted_by()
nfsd: call cache_put if xdr_reserve_space returns NULL
...
|
||
|
Linus Torvalds
|
721068dec4 |
gfs2 changes
- Eliminate the writepage address space operation (by Matthew Wilcox). - A syzkaller fix (by Julian Sun) and a minor cleanup (by Andreas Gruenbacher). -----BEGIN PGP SIGNATURE----- iQJIBAABCAAyFiEEJZs3krPW0xkhLMTc1b+f6wMTZToFAmbwIfMUHGFncnVlbmJh QHJlZGhhdC5jb20ACgkQ1b+f6wMTZTqj/RAApBJf8Da7U9Qn3rMtCdV3HU8p9VSF Fwzr1qVgthNNfFGSaNhTQcTglSL0OLMg8rLaAFN8G0RJrOyJw9Q0GclhLR+wGy5F KpvpVczkYh+UphYJ7LhygUE9/cP2GZCSI5EbI+cIifnioY8rztt+e8QqteFpAoFA 3asfynVWeAnYYh6qIjZBSvi77KWzaxk9Kyv8WScJ//FTNHYYXLMKUhZEXuh0gCdv r9VwCnRNTm8X9YtbeaRduC7mSRcVwtV+KCCJ0Lxw292a795g5oWvdwnx4DQg5120 XvdcGkZOV/sjQE19vhfkJot6kLPhP9PofTWBIbwqMwV/lkxEKlQAPJ5+mnjg56eU JekZjibxEewSDkG4riWibBP2WgIfqHkryl8o9a4dZSIjeNfzJYbvhyL2NwPYfFOY 43VeC6AB6K49gwUtD0gRTOKV/EKEFswRh1Cstvt+hPrpnF7Y/ZUjCptaEk/ZicyK qWG/6YVtjXz9HvOo/eojTTlZuwlmh2l63aWwW9s8/aMCei6V5Hs/S3gtuZSg7bKL AtfUmwlNLfNSh4VavO6W3SxuCp12OVwPYe0WQPccMshA6fVbsH1QV8LSUS5WKaE7 TGsevEWEanAm85zlbar2BvIk1PaxRNvNJ7BgZ1LYUwdHvm9/h+JPMZUYqBUDYbZC Fz5wF5zjbmeR91k= =cuQP -----END PGP SIGNATURE----- Merge tag 'gfs2-v6.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 update from Andreas Gruenbacher: - Convert the writepage address space operation to writepages (Matthew Wilcox) - A syzkaller fix (by Julian Sun) and a minor cleanup (Andreas Gruenbacher) * tag 'gfs2-v6.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Remove gfs2_aspace_writepage() gfs2: Remove gfs2_jdata_writepage() gfs2: Remove __gfs2_writepage() gfs2: Add gfs2_aspace_writepages() gfs2: fix double destroy_workqueue error gfs2: Minor gfs2_glock_cb cleanup |
||
|
Linus Torvalds
|
a1fb2fcbb6 |
for-6.12-tag
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAmbxUdkACgkQxWXV+ddt WDtAVQ//SCg5XtExxtol1emzZ+AGQjwRnRfUPo/x32h9SmaynaHa/sLsG2EwePKs 1lrkW8gEx3NF1bfeCubhoVX2eAo/1rwGqtPEbweE7XaYtmSnxT8jXeH2fQcMwQMc PkYfnCMIOdJzwoVS8wS3kLmuDep+9DJrbeI9oN5tUgugkTTbW7g576uv/SXjp46D Dl4b1uvVOCowBbY2Bz1pg0fQpBzJcLzvynGElSi85uoQ520JuA8PP/3Pszg8BTxm 6MO99kF0MhVSBnKSvmlIgxmlnGhlW/AlZakxywRYYKsiSM/eCWHpyUV0p4mMcpWW QM8yeJcAhugTDIV3VdRpGx4NcJSo1PPaXxRrMr/vnnuOPF4VQ2gSw+S4p44YCsML VpyNJIjeXNO86A6feQybxwczMzdpkc5UzdfJ+l3CDSxcGiQGRU3WWPIHjte90e38 ZNjXknc96EwOmxsx8ojGlfi7Lh9yHklMGslxI64488PTa+2RRGITUSziAla29nrd E4U6bh+bLeh2a11u+OjvSqIjdDfoJZD40Abnqe6DVA9pboPaLvf8vAVZa1FOJxsI oVJgkdhEBGbn26KqlghlnbkYBdjuGxtBoyuCvUAI8ybOTVnp423d+JYXkZOnSq9A EdL3UGII4LWQ71p+QxF3tm5nuKfbulyibfoBNj57zk0hM2OVNdg= =wGXc -----END PGP SIGNATURE----- Merge tag 'for-6.12-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - fix dangling pointer to rb-tree of defragmented inodes after cleanup - a followup fix to handle concurrent lseek on the same fd that could leak memory under some conditions - fix wrong root id reported in tree checker when verifying dref * tag 'for-6.12-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix use-after-free on rbtree that tracks inodes for auto defrag btrfs: tree-checker: fix the wrong output of data backref objectid btrfs: fix race setting file private on concurrent lseek using same fd |
||
|
Linus Torvalds
|
d0359e4ca0 |
\n
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmbxQcMACgkQnJ2qBz9k QNm7vwf7BF/8EXviJq58Nkifay1miMcZmaJk9LCWY3zB6Ce5ZzmqdtJbs0/RmCAq q67lqsDibu5tMaIh+WOQ9RLPOQi1UFlmKzOCIdbrGzMFkHHW758+KUMdbo6CR3Bi T4TAsRRLwOkZW+cTGhtF43EY3sSKiNPgGeeDcCBKXGYi259Wmq22SZLoy9EmOVKe bNlK+zbKCaVJtgmvaN2MGmc+vamOgSBTZ+vXDrokDOmmyLr66ozrrvvSa3SOKeDA 9alTE0jjRdhjMOjpYH7yy1x3LtLez5qAA0rK/WPiuQSx0wGvXsmyLyLtf1NRHUsX 7wIWV0Gz5RookxnVCGZdZMCWihRhSg== =sDCT -----END PGP SIGNATURE----- Merge tag 'fs_for_v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull quota and isofs updates from Jan Kara: "A few small cleanups in quota and isofs" * tag 'fs_for_v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: isofs: Annotate struct SL_component with __counted_by() quota: remove unnecessary error code translation in dquot_quota_enable quota: remove redundant return at end of void function quota: remove unneeded return value of register_quota_format quota: avoid missing put_quota_format when DQUOT_SUSPENDED is passed |
||
|
Linus Torvalds
|
b3f391fddf |
bcachefs changes for 6.12-rc1
rcu_pending, btree key cache rework: this solves lock contenting in the key cache, eliminating the biggest source of the srcu lock hold time warnings, and drastically improving performance on some metadata heavy workloads - on multithreaded creates we're now 3-4x faster than xfs. We're now using an rhashtable instead of the system inode hash table; this is another significant performance improvement on multithreaded metadata workloads, eliminating more lock contention. for_each_btree_key_in_subvolume_upto(): new helper for iterating over keys within a specific subvolume, eliminating a lot of open coded "subvolume_get_snapshot()" and also fixing another source of srcu lock time warnings, by running each loop iteration in its own transaction (as the existing for_each_btree_key() does). More work on btree_trans locking asserts; we now assert that we don't hold btree node locks when trans->locked is false, which is important because we don't use lockdep for tracking individual btree node locks. Some cleanups and improvements in the bset.c btree node lookup code, from Alan. Rework of btree node pinning, which we use in backpointers fsck. The old hacky implementation, where the shrinker just skipped over nodes in the pinned range, was causing OOMs; instead we now use another shrinker with a much higher seeks number for pinned nodes. Rebalance now uses BCH_WRITE_ONLY_SPECIFIED_DEVS; this fixes an issue where rebalance would sometimes fall back to allocating from the full filesystem, which is not what we want when it's trying to move data to a specific target. Use __GFP_ACCOUNT, GFP_RECLAIMABLE for btree node, key cache allocations. Idmap mounts are now supported - Hongbo. Rename whiteouts are now supported - Hongbo. Erasure coding can now handle devices being marked as failed, or forcibly removed. We still need the evacuate path for erasure coding, but it's getting very close to ready for people to start using. Status, and when will we be taking off experimental: ---------------------------------------------------- Going by critical, user facing bugs getting found and fixed, we're nearly there. There are a couple key items that need to be finished before we can take off the experimental label: - The end-user experience is still pretty painful when the root filesystem needs a fsck; we need some form of limited self healing so that necessary repair gets run automatically. Errors (by type) are recorded in the superblock, so what we need to do next is convert remaining inconsistent() errors to fsck() errors (so that all runtime inconsistencies are logged in the superblock), and we need to go through the list of fsck errors and classify them by which fsck passes are needed to repair them. - We need comprehensive torture testing for all our repair paths, to shake out remaining bugs there. Thomas has been working on the tooling for this, so this is coming soonish. Slightly less critical items: - We need to improve the end-user experience for degraded mounts: right now, a degraded root filesystem means dropping to an initramfs shell or somehow inputting mount options manually (we don't want to allow degraded mounts without some form of user input, except on unattended servers) - we need the mount helper to prompt the user to allow mounting degraded, and make sure this works with systemd. - Scalabiity: we have users running 100TB+ filesystems, and that's effectively the limit right now due to fsck times. We have some reworks in the pipeline to address this, we're aiming to make petabyte sized filesystems practical. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEKnAFLkS8Qha+jvQrE6szbY3KbnYFAmbvHQoACgkQE6szbY3K bnYfAw/+IXQ43/O+Jzs0MLD7pKZnrlbHiX9FqYLazD40vWvkyRTQOwgTn8pVNhq3 4YWmtuZyqh036YC+bGqYFOhz20YetS5UdgbClpwmc99JJ6xsY+Z1mdpYfz5oq1Dw /pBX5iYb3rAt8UbQoZ8lcWM+GpT3GKJVgJuiLB2gRp9gATFesuh+0qU42oIVVVU5 4y3VhDBUmRk4XqEnk8hr7EIDMW0wWP3aptxYMZzeUPW0x1cEQ+FWrJo5D6lXv2KK dKv3MogvA0FFNi/eNexclPiu2pXtI7vrxT7umsxAICHLt41rWpV5ttE6io3bC4ZN qvwF9w2CpmKPKchFru9PO+QrWHVR7e6bphwf3TzyoKZ7tTn42f1RQlub7gBzI3bz ai5ZwGRIvpUoPVBj+CO+Ipog81uUb23Ma+gXg1akEFBOAb+o7I3KOOSBh5l+0cHj 3Ov1n0TLcsoO2cqoqfsV2QubW9YcWEZ76g5mKwQnUn8Cs6Fp0wWaIyK9aNkIAxcr tNDPGtH1gKitxUvju5i/LyI7y1UoeFvqJFee0VsU6QnixHn1ySzhePsJt6UEnIJT Ia3C96Igqu2mV9FxhfGHj/qi7TGjqqkZHa8+B610cDpgf15cx7Ps2DYjkuQMFCqZ Q3Q1o5De9roRq5xF2hLiYJCbzJKqd5ichFsBtLQuX572ICxbICg= =oVCy -----END PGP SIGNATURE----- Merge tag 'bcachefs-2024-09-21' of git://evilpiepirate.org/bcachefs Pull bcachefs updates from Kent Overstreet: - rcu_pending, btree key cache rework: this solves lock contenting in the key cache, eliminating the biggest source of the srcu lock hold time warnings, and drastically improving performance on some metadata heavy workloads - on multithreaded creates we're now 3-4x faster than xfs. - We're now using an rhashtable instead of the system inode hash table; this is another significant performance improvement on multithreaded metadata workloads, eliminating more lock contention. - for_each_btree_key_in_subvolume_upto(): new helper for iterating over keys within a specific subvolume, eliminating a lot of open coded "subvolume_get_snapshot()" and also fixing another source of srcu lock time warnings, by running each loop iteration in its own transaction (as the existing for_each_btree_key() does). - More work on btree_trans locking asserts; we now assert that we don't hold btree node locks when trans->locked is false, which is important because we don't use lockdep for tracking individual btree node locks. - Some cleanups and improvements in the bset.c btree node lookup code, from Alan. - Rework of btree node pinning, which we use in backpointers fsck. The old hacky implementation, where the shrinker just skipped over nodes in the pinned range, was causing OOMs; instead we now use another shrinker with a much higher seeks number for pinned nodes. - Rebalance now uses BCH_WRITE_ONLY_SPECIFIED_DEVS; this fixes an issue where rebalance would sometimes fall back to allocating from the full filesystem, which is not what we want when it's trying to move data to a specific target. - Use __GFP_ACCOUNT, GFP_RECLAIMABLE for btree node, key cache allocations. - Idmap mounts are now supported (Hongbo Li) - Rename whiteouts are now supported (Hongbo Li) - Erasure coding can now handle devices being marked as failed, or forcibly removed. We still need the evacuate path for erasure coding, but it's getting very close to ready for people to start using. * tag 'bcachefs-2024-09-21' of git://evilpiepirate.org/bcachefs: (99 commits) bcachefs: return err ptr instead of null in read sb clean bcachefs: Remove duplicated include in backpointers.c bcachefs: Don't drop devices with stripe pointers bcachefs: bch2_ec_stripe_head_get() now checks for change in rw devices bcachefs: bch_fs.rw_devs_change_count bcachefs: bch2_dev_remove_stripes() bcachefs: bch2_trigger_ptr() calculates sectors even when no device bcachefs: improve error messages in bch2_ec_read_extent() bcachefs: improve error message on too few devices for ec bcachefs: improve bch2_new_stripe_to_text() bcachefs: ec_stripe_head.nr_created bcachefs: bch_stripe.disk_label bcachefs: stripe_to_mem() bcachefs: EIO errcode cleanup bcachefs: Rework btree node pinning bcachefs: split up btree cache counters for live, freeable bcachefs: btree cache counters should be size_t bcachefs: Don't count "skipped access bit" as touched in btree cache scan bcachefs: Failed devices no longer require mounting in degraded mode bcachefs: bch2_dev_rcu_noerror() ... |
||
|
Linus Torvalds
|
f8ffbc365f |
struct fd layout change (and conversion to accessor helpers)
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZvDNmgAKCRBZ7Krx/gZQ 63zrAP9vI0rf55v27twiabe9LnI7aSx5ckoqXxFIFxyT3dOYpQD/bPmoApnWDD3d 592+iDgLsema/H/0/CqfqlaNtDNY8Q0= =HUl5 -----END PGP SIGNATURE----- Merge tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull 'struct fd' updates from Al Viro: "Just the 'struct fd' layout change, with conversion to accessor helpers" * tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: add struct fd constructors, get rid of __to_fd() struct fd: representation change introduce fd_file(), convert all accessors to it. |
||
|
Linus Torvalds
|
f8eb5bd9a8 |
mm: fix build on 32-bit targets without MAX_PHYSMEM_BITS
The merge resolution to deal with the conflict between commits |
||
Chen Ni
|
91dba615c3 |
mfd: atc260x: Convert a bunch of commas to semicolons
Replace a comma between expression statements by a semicolon. Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Link: https://lore.kernel.org/r/20240902085019.4111445-1-nichen@iscas.ac.cn Signed-off-by: Lee Jones <lee@kernel.org> |
||
Mukesh Ojha
|
abd4107a1d |
dt-bindings: mfd: qcom,tcsr: Add compatible for sa8775p
Document the compatible for sa8775p SoC. Reviewed-by: Elliot Berman <quic_eberman@quicinc.com> Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20240830133908.2246139-1-quic_mojha@quicinc.com Signed-off-by: Lee Jones <lee@kernel.org> |
||
Ilpo Järvinen
|
db6a186505 |
mfd: intel-lpss: Add Intel Panther Lake LPSS PCI IDs
Add Intel Panther Lake-H/P PCI IDs. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240829095719.1557-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Ilpo Järvinen
|
6112597f5b |
mfd: intel-lpss: Add Intel Arrow Lake-H LPSS PCI IDs
Add Intel Arrow Lake-H PCI IDs. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240829095719.1557-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Lee Jones <lee@kernel.org> |
||
Detlev Casanova
|
33d05f2abf |
dt-bindings: mfd: syscon: Add rk3576 QoS register compatible
Document rk3576 compatible for QoS registers. Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/01020191998a2fd4-4d7b091c-9c4c-4067-b8d9-fe7482074d6d-000000@eu-west-1.amazonses.com Signed-off-by: Lee Jones <lee@kernel.org> |
||
Haibo Chen
|
9ca84b355d |
dt-bindings: mfd: adp5585: Add parsing of hogs
Allow parsing GPIO controller children nodes with GPIO hogs. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240828030405.2851611-1-haibo.chen@nxp.com Signed-off-by: Lee Jones <lee@kernel.org> |
||
Rob Herring (Arm)
|
04bb1800e6 |
mfd: tc3589x: Drop vendorless compatible string from match table
There's no need to list "tc3589x" in the DT match table. The I2C core
will strip any vendor prefix and match against the i2c_device_id table
which has an "tc3589x" entry.
Probably "tc3589x" and TC3589X_UNKNOWN could be removed altogether.
Use of that compatible was only on some STE platforms and was dropped
in 2013. There were ABI breaks in 2014 claiming no DTs in the wild. See
commit
|
||
Jinjie Ruan
|
015d188002 |
mfd: qcom-spmi-pmic: Use for_each_child_of_node_scoped()
Avoids the need for manual cleanup of_node_put() in early exits from the loop. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Link: https://lore.kernel.org/r/20240826092734.2899562-3-ruanjinjie@huawei.com Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Jinjie Ruan
|
0db28e963a |
mfd: max77620: Use for_each_child_of_node_scoped()
Avoids the need for manual cleanup of_node_put() in early exits from the loop. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Link: https://lore.kernel.org/r/20240826092734.2899562-2-ruanjinjie@huawei.com Signed-off-by: Lee Jones <lee@kernel.org> |
||
Hans de Goede
|
ae7eee56cd |
mfd: intel_soc_pmic_chtwc: Make Lenovo Yoga Tab 3 X90F DMI match less strict
There are 2G and 4G RAM versions of the Lenovo Yoga Tab 3 X90F and it turns out that the 2G version has a DMI product name of "CHERRYVIEW D1 PLATFORM" where as the 4G version has "CHERRYVIEW C0 PLATFORM". The sys-vendor + product-version check are unique enough that the product-name check is not necessary. Drop the product-name check so that the existing DMI match for the 4G RAM version also matches the 2G RAM version. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Link: https://lore.kernel.org/r/20240825132617.8809-1-hdegoede@redhat.com Signed-off-by: Lee Jones <lee@kernel.org> |
||
Tzung-Bi Shih
|
fd0fec405d |
mfd: cros_ec: Update module description
The module description can be backtracked to commit |