Commit Graph

1322 Commits

Author SHA1 Message Date
Francisco Jerez
a5027ccd3c drm/nouveau: Use the software object for fencing.
This should avoid a race condition on nv0x, if we're doing it with
actual PGRAPH objects and a there's a fence within the FIFO DMA fetch
area when a context switch kicks in.

In that case we get an ILLEGAL_MTHD interrupt as expected, but the
values in PGRAPH_TRAPPED_ADDR aren't calculated correctly and they're
almost useless (e.g. you can see ILLEGAL_MTHDs for the now inactive
channel, with a wrong offset/data pair).

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11 14:41:12 +10:00
Francisco Jerez
ca4362adb4 drm/nouveau: Allocate a per-channel instance of NV_SW.
It will be useful for various synchronization purposes, mostly stolen
from "[PATCH] drm/nv50: synchronize user channel after buffer object
move on kernel channel" by Maarten Maathuis.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11 14:41:11 +10:00
Maarten Maathuis
0a2d090f99 drm/nv50: make the blocksize depend on vram size
- This should be better than what we have now.
- I'm less sure about the non power of two path.

Signed-off-by: Maarten Maathuis <madman2003@gmail.com>
2010-01-11 14:41:10 +10:00
Maarten Maathuis
c2b82924bd drm/nouveau: better alignment of bo sizes and use roundup instead of ALIGN
- Aligning to block size should ensure that the extra size is enough.
- Using roundup, because not all sizes are powers of two.

Signed-off-by: Maarten Maathuis <madman2003@gmail.com>
2010-01-11 14:41:10 +10:00
Francisco Jerez
8f71c29e44 drm/nouveau: Don't skip card take down on nv0x.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11 14:41:09 +10:00
Francisco Jerez
b7f7e41b89 drm/nouveau: Implement nv42-nv43 TV load detection.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11 14:41:08 +10:00
Francisco Jerez
02076da97a drm/nouveau: Clean up the nv17-nv4x load detection code a bit.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11 14:41:08 +10:00
Marcin Slusarz
e55ca7e68e drm/nv50: fix fillrect color
struct fb_fillrect->color is not a color, but index into pseudo_palette
array

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-11 14:41:07 +10:00
Ben Skeggs
fbe36a7a06 drm/nv50: ignore vbios table's claim to the contrary if EDID says >8bpc
Should fix dim panel issues reported on Dell M6400/M6500.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-11 14:41:07 +10:00
Francisco Jerez
aeca15e596 drm/nouveau: Drop redundant placement initialization.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11 14:41:06 +10:00
Francisco Jerez
69a18c328b drm/nouveau: No need to force evict=true when swapping evicted BOs back in.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11 14:41:05 +10:00
Francisco Jerez
c6af6053be drm/nouveau: Fix "general protection fault" in the flipd/flips eviction path.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11 14:41:05 +10:00
Francisco Jerez
73cb9276fd drm/i2c/ch7006: Drop build time dependency to nouveau.
This partially reverts e4b41066, as this driver is intended to be
useful with any KMS driver for suitable hardware. The missing build
dependency that commit workarounded was DRM_KMS_HELPER.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11 14:41:04 +10:00
Francisco Jerez
287c153214 drm/nouveau: Make the MM aware of pre-G80 tiling.
This commit has also the following 3 bugfix commits squashed into it from
the nouveau git tree:

drm/nouveau: Fix up the tiling alignment restrictions for nv1x.
drm/nouveau: Fix up the nv2x tiling alignment restrictions.
drm/nv50: fix align typo for g9x

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11 14:41:03 +10:00
Francisco Jerez
0d87c10031 drm/nouveau: Pre-G80 tiling support.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11 14:41:03 +10:00
Francisco Jerez
617e234b01 drm/nouveau: Add cache_flush/pull fifo engine functions.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11 14:41:02 +10:00
Dave Airlie
94fd163d86 drm: reduce WARN_ON to a printk.
Lots of ppl keep thinking this is an oops, it was just a warning for
me to see, just make it a printk now.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-11 14:36:09 +10:00
Dave Airlie
509c7d83c3 drm/kms/fb: check for depth changes from userspace for resizing.
If userspace (plymouth in this case) asks for a deeper depth,
refuse it as well due to lack of resizing.

This fixes an issue since < 32MB cards went to 8bpp and plymouth
crashes on startup.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-11 14:36:09 +10:00
David John
89347bb8ef drm: Keep disabled outputs disabled after suspend / resume
With the current DRM code, an output that has been powered off
from userspace will automatically power back on when resuming
from suspend. This patch fixes this behaviour.

Tested only with the Intel i915 driver on an Intel GM45 Express
chipset.

Signed-off-by: David John <davidjon@xenontk.org>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-11 14:36:08 +10:00
Dave Airlie
a81406b414 Merge remote branch 'korg/drm-radeon-next' into drm-linus
* korg/drm-radeon-next:
  drm/radeon/kms: rs600: use correct mask for SW interrupt
  gpu/drm/radeon/radeon_irq.c: move a dereference below a NULL test
  drm/radeon/radeon_device.c: move a dereference below a NULL test
  drm/radeon/radeon_fence.c: move a dereference below the NULL test
  drm/radeon/radeon_connectors.c: add a NULL test before dereference
  drm/radeon/kms: fix memory leak
  drm/radeon/kms: add missing breaks in i2c and ss lookups
  drm/radeon/kms: add primary dac adj values table
  drm/radeon/kms: fallback to default connector table
2010-01-07 14:00:29 +10:00
Luca Tettamanti
43b19f161c drm/radeon/kms: rs600: use correct mask for SW interrupt
The mask happens to be the same, but the IH is reading the status, not the
not the control register.

Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-07 13:57:16 +10:00
Darren Jenkins
65aa2f4e8d gpu/drm/radeon/radeon_irq.c: move a dereference below a NULL test
If a NULL value is possible, the dereference should only occur after the
NULL test.

Coverity CID: 13338

Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-07 13:56:32 +10:00
Darren Jenkins
875c186620 drm/radeon/radeon_device.c: move a dereference below a NULL test
If a NULL value is possible, the dereference should only occur after the
NULL test.

Coverity CID: 13335

Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-07 13:56:06 +10:00
Darren Jenkins
3655d54af8 drm/radeon/radeon_fence.c: move a dereference below the NULL test
If a NULL value is possible, the dereference should only occur after the
NULL test.

Coverity CID: 13334

Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-07 13:54:39 +10:00
Darren Jenkins
d8a7f79246 drm/radeon/radeon_connectors.c: add a NULL test before dereference
The encoder variable can be NULL in this function so I believe it should
be checked before dereference.

Coverity CID: 13253

[airlied: extremely unlikely to happen]

Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-07 13:48:25 +10:00
Jiri Slaby
5eb226132f drm/radeon/kms: fix memory leak
Stanse found a memory leak in radeon_master_create. master_priv is not
freed/assigned on all paths. Fix that.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-07 13:38:59 +10:00
Dave Airlie
90520b78a4 Merge branch 'drm-core-next' into drm-linus
* drm-core-next:
  drm/kms: Fix &&/|| confusion in drm_fb_helper_connector_parse_command_line()
  drm/edid: Fix CVT width/height decode
  drm/edid: Skip empty CVT codepoints
  drm: remove address mask param for drm_pci_alloc()
2010-01-07 13:36:00 +10:00
Roel Kluin
e89a8c901c drm/kms: Fix &&/|| confusion in drm_fb_helper_connector_parse_command_line()
This always evaluates to true.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-07 13:19:03 +10:00
Adam Jackson
8e10ee9a0d drm/edid: Fix CVT width/height decode
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-07 13:18:04 +10:00
Adam Jackson
69da301589 drm/edid: Skip empty CVT codepoints
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-07 13:17:48 +10:00
Zhenyu Wang
e6be8d9d17 drm: remove address mask param for drm_pci_alloc()
drm_pci_alloc() has input of address mask for setting pci dma
mask on the device, which should be properly setup by drm driver.
And leave it as a param for drm_pci_alloc() would cause confusion
or mistake would corrupt the correct dma mask setting, as seen on
intel hw which set wrong dma mask for hw status page. So remove
it from drm_pci_alloc() function.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-07 13:15:50 +10:00
Alex Deucher
1d3d51b6d2 drm/radeon/kms: add missing breaks in i2c and ss lookups
Should fix fdo bug 25741

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-06 11:31:56 +10:00
Alex Deucher
246263ccc3 drm/radeon/kms: add primary dac adj values table
Look up primary dac adj values from the table if
there is no bios or bios dac table to reference.

The lookup table may need to be adjusted for certain
families.

Should fix kernel bug 14945.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-06 11:31:55 +10:00
Alex Deucher
b9597a1c6f drm/radeon/kms: fallback to default connector table
if necessary for combios

Some early combios radeon cards don't have a connector
table or dac table in the bios, if they do not, fallback
to the default tables.

Should fix kernel bug 14963.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-06 11:31:53 +10:00
Dave Airlie
d94a5108f7 Merge remote branch 'korg/drm-radeon-next' into drm-linus
* korg/drm-radeon-next:
  drm/radeon/kms: add definitions for v4 power tables
  drm/radeon/kms: never combine LVDS with another encoder
  drm/radeon/kms: Check module arguments to be valid V2
  drm/radeon/kms: Avoid crash when trying to cleanup uninitialized structure
  drm/radeon/kms: add cvt mode if we only have lvds w/h and no edid (v4)
  drm/radeon/kms: add 3DC compression support
  drm/radeon/kms: allow rendering while no colorbuffer is set on r300
  drm/radeon/kms: enable memory clock reading on legacy (V2)
  drm/radeon/kms: prevent parallel AtomBIOS calls
  drm/radeon/kms: set proper default tv standard
  drm/radeon/kms: fix legacy rmx
  drm/radeon/kms/atom: fill in proper defines for digital setup
2009-12-23 11:18:33 +10:00
Alex Deucher
0786201d8c drm/radeon/kms: add definitions for v4 power tables
[airlied: just adding this for completeness to avoid drift between
public atombios.h files]
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23 11:14:05 +10:00
Alex Deucher
f56cd64f5f drm/radeon/kms: never combine LVDS with another encoder
When linking multiple encoders to a connector, make sure
to not link LVDS with another connector.  Some bioses
have the same i2c line for LVDS and VGA.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23 11:14:05 +10:00
Jerome Glisse
3642133816 drm/radeon/kms: Check module arguments to be valid V2
This patch add a function which check module argument to be
valid. On invalid argument it prints a warning and setback
the default value.

V2: Allow 0 for vram limit & agp mode which are the default
value

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23 11:14:05 +10:00
Jerome Glisse
0a0c7596c6 drm/radeon/kms: Avoid crash when trying to cleanup uninitialized structure
Add boolean to record if some part of the driver are initialized or
not this allow to avoid a crash when trying to cleanup uninitialized
structure members.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23 11:14:04 +10:00
Alex Deucher
d2efdf6d6f drm/radeon/kms: add cvt mode if we only have lvds w/h and no edid (v4)
This fixes LVDS on some mac laptops without a panel edid.

v2 - Set proper mode type flags
v3 - Note that this is not neceesarily the exact panel mode,
but an approximation based on the cvt formula.  For these
systems we should ideally read the mode info out of the
registers or add a mode table, but this works and is much
simpler.
v4 - Update comments and debug message.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23 11:14:04 +10:00
Marek Olšák
512889f450 drm/radeon/kms: add 3DC compression support
There are 2 formats:
ATI1N: 64 bits per 4x4 block, one-channel format
ATI2N: 128 bits per 4x4 block, two-channel format

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23 11:14:04 +10:00
Marek Olšák
46c64d4bfa drm/radeon/kms: allow rendering while no colorbuffer is set on r300
Because hardware cannot disable all colorbuffers directly to do depth-only
rendering, a user should:
- disable reading from a colorbuffer in blending
- disable fastfill
- set the color channel mask to 0 to prevent writing to a colorbuffer

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23 11:14:04 +10:00
Rafał Miłecki
5ea597f376 drm/radeon/kms: enable memory clock reading on legacy (V2)
V2: detect IGP cards (which don't have own memory)

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23 11:14:04 +10:00
Rafał Miłecki
c31ad97f18 drm/radeon/kms: prevent parallel AtomBIOS calls
This just adds a mutex around the atombios table execution
so we don't call it from two contexts at once.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23 11:14:03 +10:00
Alex Deucher
d79766fab9 drm/radeon/kms: set proper default tv standard
we were just using 1 before.

reported on irc by soreau

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23 11:14:03 +10:00
Alex Deucher
310a82c8c5 drm/radeon/kms: fix legacy rmx
This makes 640x480 on my R100 work again, both
in aspect and centered mode.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Tested-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23 11:14:03 +10:00
Alex Deucher
edc664e314 drm/radeon/kms/atom: fill in proper defines for digital setup
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23 11:14:03 +10:00
Dave Airlie
44f9e6c6bc Merge remote branch 'nouveau/for-airlied' into drm-linus
* nouveau/for-airlied:
  drm/nouveau: fix bug causing pinned buffers to lose their NO_EVICT flag
  drm/nv50: fix suspend/resume delays without firmware present
  drm/nouveau: prevent all channel creation if accel not available
  drm/nv50: fix two potential suspend/resume oopses
  drm/nv40: implement ctxprog/state generation
  drm/nv10: Add the initial graph context and soft methods needed for LMA.
  drm/nouveau: Fix up buffer eviction, and evict them to GART, if possible.
  drm/nouveau: Add proper error handling to nouveau_card_init
  drm/nv04: Fix NV04 set_operation software method.
  drm/nouveau: Kill global state in BIOS script interpreter
  drm/nouveau: Kill global state in NvShadowBIOS
  drm/nouveau: use drm debug levels
  drm/i2c/ch7006: Fix load detection false positives right after system init.
  drm/nv04-nv40: Fix "conflicting memory types" when saving/restoring VGA fonts.
2009-12-23 10:28:24 +10:00
Marin Mitov
29ebdf925c drm/kms: silencing a false positive warning.
warning: 'width' may be used uninitialized in this function
drivers/gpu/drm/drm_edid.c

Signed-off-by: Marin Mitov <mitov@issp.bas.bg>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23 10:09:09 +10:00
Bob Gleitsmann
e2108eb1f6 drm/mm: fix logic for selection of best fit block
This is from bug 25728.

[airlied: I'm just forwarding the patch for review, Thomas, ickle?]

Acked-by: Jerome Glisse <jglisse@redhat.com>
Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23 10:08:08 +10:00