When mounting with smb2/smb3 (e.g. vers=2.1) and cifsacl mount option,
it was trying to get the mode by querying the acl over the cifs
rather than smb2 protocol. This patch makes that protocol
independent and makes cifsacl smb2 mounts return a more intuitive
operation not supported error (until we add a worker function
for smb2_get_acl).
Note that a previous patch fixed getxattr/setxattr for the CIFSACL xattr
which would unconditionally call cifs_get_acl and cifs_set_acl (even when
mounted smb2). I made those protocol independent last week (new protocol
version operations "get_acl" and "set_acl" but did not add an
smb2_get_acl and smb2_set_acl yet so those now simply return EOPNOTSUPP
which at least is better than sending cifs requests on smb2 mount)
The previous patches did not fix the one remaining case though ie
mounting with "cifsacl" when getting mode from acl would unconditionally
end up calling "cifs_get_acl_from_fid" even for smb2 - so made that protocol
independent but to make that protocol independent had to make sure that the callers
were passing the protocol independent handle structure (cifs_fid) instead
of cifs specific _u16 network file handle (ie cifs_fid instead of cifs_fid->fid)
Now mount with smb2 and cifsacl mount options will return EOPNOTSUP (instead
of timing out) and a future patch will add smb2 operations (e.g. get_smb2_acl)
to enable this.
Signed-off-by: Steve French <smfrench@gmail.com>
In the event that a send fails in an uncached write, or we end up
needing to reissue it (-EAGAIN case), we'll kfree the wdata but
the pages currently leak.
Fix this by adding a new kref release routine for uncached writedata
that releases the pages, and have the uncached codepaths use that.
[original patch by Jeff modified to fix minor formatting problems]
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
Rename CIFSSMBOpen to CIFS_open and make it take
cifs_open_parms structure as a parm.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
Remove indentation, fix comment style, rename camel case
variables in preparation to make it work with cifs_open_parms
structure as a parm.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
Add a new protocol ops function create_mf_symlink and have
create_mf_symlink() use it.
This patchset moves the MFSymlink operations completely to the
ops structure so that we only use the right protocol versions when
querying or creating MFSymlinks.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Clean up camel case in functionnames.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Rename open_query_close_cifs_symlink to cifs_query_mf_symlink() to make
the name more consistent with other protocol version specific functions.
We also pass tcon as an argument to the function. This is already
available in the calling functions and we can avoid having to make an
unnecessary lookup.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
When we obtain tcon from cifs_sb, we use cifs_sb_tlink() to first obtain
tlink which also grabs a reference to it. We do not drop this reference
to tlink once we are done with the call.
The patch fixes this issue by instead passing tcon as a parameter and
avoids having to obtain a reference to the tlink. A lookup for the tcon
is already made in the calling functions and this way we avoid having to
re-run the lookup. This is also consistent with the argument list for
other similar calls for M-F symlinks.
We should also return an ENOSYS when we do not find a protocol specific
function to lookup the MF Symlink data.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
CC: Stable <stable@kernel.org>
Signed-off-by: Steve French <smfrench@gmail.com>
An earlier patch allowed setting the per-file compression flag
"chattr +c filename"
on an smb2 or smb3 mount, and also allowed lsattr to return
whether a file on a cifs, or smb2/smb3 mount was compressed.
This patch extends the ability to set the per-file
compression flag to the cifs protocol, which uses a somewhat
different IOCTL mechanism than SMB2, although the payload
(the flags stored in the compression_state) are the same.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Switch smb2 code to use per session session key and smb3 code to
use per session signing key instead of per connection key to
generate signatures.
For that, we need to find a session to fetch the session key to
generate signature to match for every request and response packet.
We also forgo checking signature for a session setup response
from the server.
Acked-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
by using a query reparse ioctl request.
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
When use of symlinks is enabled (mounting with mfsymlinks option) to
non-Samba servers, we always tried to use cifs, even when we
were mounted with SMB2 or SMB3, which causes the server to drop the
network connection.
This patch separates out the protocol specific operations for cifs from
the code which recognizes symlinks, and fixes the problem where
with SMB2 mounts we attempt cifs operations to open and read
symlinks. The next patch will add support for SMB2 for opening
and reading symlinks. Additional followon patches will address
the similar problem creating symlinks.
Signed-off-by: Steve French <smfrench@gmail.com>
Updated patch to try to prevent allocation of cifs, smb2 or smb3 crypto
secmech structures unless needed. Currently cifs allocates all crypto
mechanisms when the first session is established (4 functions and
4 contexts), rather than only allocating these when needed (smb3 needs
two, the rest of the dialects only need one).
Acked-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Fix build warning in Shirish's recent SMB3 signing patch
which occurs when SMB2 support is disabled in Kconfig.
fs/built-in.o: In function `cifs_setup_session':
>> (.text+0xa1767): undefined reference to `generate_smb3signingkey'
Pointed out by: automated 0-DAY kernel build testing backend
Intel Open Source Technology Center
CC: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
SMB3 uses a much faster method of signing (which is also better in other ways),
AES-CMAC. With the kernel now supporting AES-CMAC since last release, we
are overdue to allow SMB3 signing (today only CIFS and SMB2 and SMB2.1,
but not SMB3 and SMB3.1 can sign) - and we need this also for checking
secure negotation and also per-share encryption (two other new SMB3 features
which we need to implement).
This patch needs some work in a few areas - for example we need to
move signing for SMB2/SMB3 from per-socket to per-user (we may be able to
use the "nosharesock" mount option in the interim for the multiuser case),
and Shirish found a bug in the earlier authentication overhaul
(setting signing flags properly) - but those can be done in followon
patches.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Now that we track what sort of NEGOTIATE response was received, stop
mandating that every session on a socket use the same type of auth.
Push that decision out into the session setup code, and make the sectype
a per-session property. This should allow us to mix multiple sectypes on
a socket as long as they are compatible with the NEGOTIATE response.
With this too, we can now eliminate the ses->secFlg field since that
info is redundant and harder to work with than a securityEnum.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
Currently, we determine this according to flags in the sec_mode, flags
in the global_secflags and via other methods. That makes the semantics
very hard to follow and there are corner cases where we don't handle
this correctly.
Add a new bool to the TCP_Server_Info that acts as a simple flag to tell
us whether signing is enabled on this connection or not, and fix up the
places that need to determine this to use that flag.
This is a bit weird for the SMB2 case, where signing is per-session.
SMB2 needs work in this area already though. The existing SMB2 code has
similar logic to what we're using here, so there should be no real
change in behavior. These changes should make it easier to implement
per-session signing in the future though.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
Move the sanity checks for signed connections into a separate function.
SMB2's was a cut-and-paste job from CIFS code, so we can make them use
the same function.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
It's not obvious from reading the macro names that these macros
are for debugging. Convert the names to a single more typical
kernel style cifs_dbg macro.
cERROR(1, ...) -> cifs_dbg(VFS, ...)
cFYI(1, ...) -> cifs_dbg(FYI, ...)
cFYI(DBG2, ...) -> cifs_dbg(NOISY, ...)
Move the terminating format newline from the macro to the call site.
Add CONFIG_CIFS_DEBUG function cifs_vfs_err to emit the
"CIFS VFS: " prefix for VFS messages.
Size is reduced ~ 1% when CONFIG_CIFS_DEBUG is set (default y)
$ size fs/cifs/cifs.ko*
text data bss dec hex filename
265245 2525 132 267902 4167e fs/cifs/cifs.ko.new
268359 2525 132 271016 422a8 fs/cifs/cifs.ko.old
Other miscellaneous changes around these conversions:
o Miscellaneous typo fixes
o Add terminating \n's to almost all formats and remove them
from the macros to be more kernel style like. A few formats
previously had defective \n's
o Remove unnecessary OOM messages as kmalloc() calls dump_stack
o Coalesce formats to make grep easier,
added missing spaces when coalescing formats
o Use %s, __func__ instead of embedded function name
o Removed unnecessary "cifs: " prefixes
o Convert kzalloc with multiply to kcalloc
o Remove unused cifswarn macro
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Use INVALID_UID and INVALID_GID instead of NO_CHANGE_64 to indicate
the value should not be changed.
In cifs_fill_unix_set_info convert from kuids and kgids into uids and
gids that will fit in FILE_UNIX_BASIC_INFO.
Cc: Steve French <smfrench@gmail.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Update id_mode_to_cifs_acl to take a kuid_t and a kgid_t.
Replace NO_CHANGE_32 with INVALID_UID and INVALID_GID, and tests for
NO_CHANGE_32 with uid_valid and gid_valid.
Carefully unpack the value returned from request_key. memcpy the
value into the expected type. The convert the uid/gid into a
kuid/kgid. And then only if the result is a valid kuid or kgid update
fuid/fgid.
Cc: Steve French <smfrench@gmail.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The cifs.idmap handling code currently causes the kernel to cache the
data from userspace twice. It first looks in a rbtree to see if there is
a matching entry for the given id. If there isn't then it calls
request_key which then checks its cache and then calls out to userland
if it doesn't have one. If the userland program establishes a mapping
and downcalls with that info, it then gets cached in the keyring and in
this rbtree.
Aside from the double memory usage and the performance penalty in doing
all of these extra copies, there are some nasty bugs in here too. The
code declares four rbtrees and spinlocks to protect them, but only seems
to use two of them. The upshot is that the same tree is used to hold
(eg) uid:sid and sid:uid mappings. The comparitors aren't equipped to
deal with that.
I think we'd be best off to remove a layer of caching in this code. If
this was originally done for performance reasons, then that really seems
like a premature optimization.
This patch does that -- it removes the rbtrees and the locks that
protect them and simply has the code do a request_key call on each call
into sid_to_id and id_to_sid. This greatly simplifies this code and
should roughly halve the memory utilization from using the idmapping
code.
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
We don't need to permit a write to the area locked with a read lock
by any process including the process that issues the write.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
Passing this around as a string is contorted and painful. Instead, just
convert these to a sockaddr as soon as possible, since that's how we're
going to work with it later anyway.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
because the is no difference here. This also adds support of prefixpath
mount option for SMB2.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Rebased and resending the patch.
Path based queries can fail for lack of access, especially during lookup
during open.
open itself would actually succeed becasue of back up intent bit
but queries (either path or file handle based) do not have a means to
specifiy backup intent bit.
So query the file info during lookup using
trans2 / findfirst / file_id_full_dir_info
to obtain file info as well as file_id/inode value.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Acked-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Now we walk though cifsFileInfo's list for every incoming lease
break and look for an equivalent there. That approach misses lease
breaks that come just after an open response - we don't have time
to populate new cifsFileInfo structure to the list. Fix this by
adding new list of pending opens and look for a lease there if we
didn't find it in the list of cifsFileInfo structures.
Signed-off-by: Pavel Shilovsky <pshilovsky@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Currently CIFS code accept read/write ops on mandatory locked area
when two processes use the same file descriptor - it's wrong.
Fix this by serializing io and brlock operations on the inode.
Signed-off-by: Pavel Shilovsky <pshilovsky@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
For now, none of the callers populate rq_pages. That will be done for
writes in a later patch. While we're at it, change the prototype of
setup_async_request not to need a return pointer argument. Just
return the pointer to the mid_q_entry or an ERR_PTR.
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Use the smb_send_rqst helper function to kmap each page in the array
and update the hash for that chunk.
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
We need a way to represent a call to be sent on the wire that does not
require having all of the page data kmapped. Behold the smb_rqst struct.
This new struct represents an array of kvecs immediately followed by an
array of pages.
Convert the signing routines to use these structs under the hood and
turn the existing functions for this into wrappers around that. For now,
we're just changing these functions to take different args. Later, we'll
teach them how to deal with arrays of pages.
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Use hmac-sha256 and rather than hmac-md5 that is used for CIFS/SMB.
Signature field in SMB2 header is 16 bytes instead of 8 bytes.
Automatically enable signing by client when requested by the server
when signing ability is available to the client.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
and make cifs_get_file_info(_unix) calls static.
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
