Merge x86-specific ACPI updates, ACPI resources management updates,
one ACPI device enumeration update and miscellaneous ACPI updates for
5.16-rc1:
- Avoid flushing caches before entering C3 type of idle states on
AMD processors (Deepak Sharma).
- Avoid enumerating CPUs that are not present and not online-capable
according to the platform firmware (Mario Limonciello).
- Add DMI-based mechanism to quirk IRQ overrides and use it for two
platforms (Hui Wang).
- Change the configuration of unused ACPI device objects to reflect
the D3cold power state after enumerating devices (Rafael Wysocki).
- Update MAINTAINERS information regarding ACPI (Rafael Wysocki).
- Fix typo in ACPI Kconfig (Masanari Iid).
- Use sysfs_emit() instead of snprintf() in some places (Qing Wang).
* acpi-x86:
x86: ACPI: cstate: Optimize C3 entry on AMD CPUs
x86/ACPI: Don't add CPUs that are not online capable
ACPICA: Add support for MADT online enabled bit
* acpi-resources:
ACPI: resources: Add one more Medion model in IRQ override quirk
ACPI: resources: Add DMI-based legacy IRQ override quirk
* acpi-scan:
ACPI: scan: Release PM resources blocked by unused objects
* acpi-misc:
ACPI: replace snprintf() in "show" functions with sysfs_emit()
ACPI: Update information in MAINTAINERS
ACPI: Kconfig: Fix a typo in Kconfig
ACPICA commit 94abe858583de24a425b37cb8e62d56c65c4f3cf
Note: support for Vendor-defined microphone arrays and SNR extensions
are not supported at this time -- mostly due to a lack of example tables.
Actual compiler support for NHLT is forthcoming.
Link: https://github.com/acpica/acpica/commit/94abe858
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The online enabled bit on newer ACPI implmentations will indicate
whether the CPU is hotpluggable.
Link: http://github.com/acpica/acpica/pull/708/
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Includes support in the table compiler and the disassembler.
ACPICA commit e75074d84d1207339a048486c2d06ecb935d0092
Link: https://github.com/acpica/acpica/commit/e75074d8
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit bd46cb07e614fd85ea69e54c1f6f0ae0a5fb20ab
This structure is used in to parse PRMT in other Operating Systems
that relies on using subtable headers in order to parse ACPI tables.
Although the PRMT doesn't have "subtables" it has a list of module
information structures that act as subtables.
Link: https://github.com/acpica/acpica/commit/bd46cb07
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit f70e7593e37c9e29f19be8ad3ef93f3f34799368
Link: https://github.com/acpica/acpica/commit/f70e7593
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 81eb9c383e6dee0f1b6620e91e5c3dbb48234831
Includes: Table compiler, disassembler, and template generator.
Link: https://github.com/acpica/acpica/commit/81eb9c38
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 6949e1dd2d92788a994ce657857fe8809159e71e
Includes compiler, disassembler, and template generator.
Link: https://github.com/acpica/acpica/commit/6949e1dd
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Includes the table compiler, the disassembler and the template
generator.
ACPICA commit 27a434379e3ecafea5340c0c384789ea2062c4fb
Link: https://github.com/acpica/acpica/commit/27a43437
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
1) Add compiler support for IVRS.
2) Update disassembler support for IVRS.
3) Add a new utility, ut_is_id_integer to determine if a HID/CID is
an integer or a string.
ACPICA commit 7eb0b770cb0efcf089cb217b5f8bafc0c6395a3d
Link: https://github.com/acpica/acpica/commit/7eb0b770
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit b5e6bcf69dbb9877481992d5ce86008cfb94f5b8
SVKL (Storage Volume Key Location Table) is used by BIOS/Firmware
to share storage volume encryption key's with OS. It will be used
by userspace to decrypt and mount encrypted drives.
So add SVKL table signature and add it to known signatures array
support SVKL.
You can find details about the SVKL table in TDX specfication
titled "Guest-Host-Communication Interface (GHCI) for Intel
Trust Domain Extensions (Intel® TDX)", sec 4.4 and in ACPI
specification r6.4, sec 5.2.6.
Link: https://software.intel.com/content/dam/develop/external/us/en/documents/intel-tdx-guest-hypervisor-communication-interface.pdf
Link: https://github.com/acpica/acpica/commit/b5e6bcf6
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit f1ee04207a212f6c519441e7e25397649ebc4cea
Add Multiprocessor Wakeup Mailbox Structure definition. It is useful
in parsing MADT Wake table.
Link: https://github.com/acpica/acpica/commit/f1ee0420
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 8710a708faed728ea2672b8da842b2e9af1cf5bd
IORT revision E.b (ARM DEN 0049E.b) contains a few additions like,
-Added an identifier field in the node descriptors to aid table
cross-referencing.
-Introduced the Reserved Memory Range(RMR) node. This is used
to describe memory ranges that are used by endpoints and require
a unity mapping in SMMU.
-Introduced a flag in the RC node to express support for PRI.
-Added a flag in the RC node to declare support for PASID forward
information.
Please note that IORT Rev E and E.a have known issues and are not
supported.
Link: https://github.com/acpica/acpica/commit/8710a708
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit de805b6a355c01f3aff4044a4ba60e9845b7668c
This table displays health information about the platform firmware. For
full definition, see the ACPI specification.
Link: https://github.com/acpica/acpica/commit/de805b6a
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 036290735ad8020f762c4d94bcbc0e84b2e307b6
Link: https://github.com/acpica/acpica/commit/03629073
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 44ca5f4f9be24bf64524cdb1de46322509319056
This entails adding an optional subtable indicating secure access
components as well as two different types of secure access components
(ID-based or Memory). For definitons and uses, consult the ACPI
specification.
Link: https://github.com/acpica/acpica/commit/44ca5f4f
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Also, update struct size to reflect these changes in nfit core driver.
ACPICA commit af60199a9a1de9e6844929fd4cc22334522ed195
Link: https://github.com/acpica/acpica/commit/af60199a
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This commit squashes the following:
ACPICA commit 475c5e89f8f701ccdfee6ca567e33c854ecd6c9e
ACPICA commit 82cf78ac175a4b7d8842c5b786be24031c817cfd
This new subtable is only valid for PPTT version 3.
Elyes fixed a misspelled identifier in this commit.
Link: https://github.com/acpica/acpica/commit/475c5e89
Link: https://github.com/acpica/acpica/commit/82cf78ac
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 208d7e27ebc473feb4182cc8e58f3789c4efaca6
Link: https://github.com/acpica/acpica/commit/208d7e27
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit b9eb6f3a19b816824d6f47a6bc86fd8ce690e04b
Link: https://github.com/acpica/acpica/commit/b9eb6f3a
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit eefb865355514048380d921de5efcf30027d6b02
IVHD type 40h uses the same field layout as type 11h, but adds support
for a new device entry type F0h (ACPI HID device entry). The new device
entry type has variable length: after fixed-length fields occupying 22
bytes, there's a field of length up to 255 (as given by the preceding
field).
Link: https://github.com/acpica/acpica/commit/eefb8653
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This affects all ACPICA source code modules.
ACPICA commit c570953c914437e621dd5f160f26ddf352e0d2f4
Link: https://github.com/acpica/acpica/commit/c570953c
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 2c39dcccda4dc250a44379ae086b8b1a3fdad115
This table is no longer in use, and is not officially defined
in the ACPI specification.
Link: https://github.com/acpica/acpica/commit/2c39dccc
Signed-off-by: Al Stone <ahs3@ahs3.net>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 422166b656565d180bb3aac712009bdce5e70cdd
NHLT (Non-HDAudio Link Table) provides configuration of audio
endpoints for Intel SST (Smart Sound Technology) DSP products.
Similarly to other ACPI tables, data provided by BIOS may not
describe it correctly, thus overriding is required.
ACPI override mechanism checks for unknown signature before
proceeding. Update known signatures array to support NHLT.
Link: https://github.com/acpica/acpica/commit/422166b6
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 87a1ab2b2a63e28776261c48bdbae345f790d05d
According to AMD IOMMU Specification Revision 3.05 the reserved field
should be IOMMU Feature Reporting. Change the name of the field to the
correct one.
Link: https://github.com/acpica/acpica/commit/87a1ab2b
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 6ddc19419896e4149ced1b5f35f0dc12516c0399
The AMD IVRS table parsing supported only IVHD type 10h structures.
Parsing an IVHD type 11h caused the iasl to report unknown subtable type.
Add necessary structure definition for IVHD type 11h and apply correct
parsing method based on subtable type.
Link: https://github.com/acpica/acpica/commit/6ddc1941
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 8b9c69d0984067051ffbe8526f871448ead6a26b
Link: https://github.com/acpica/acpica/commit/8b9c69d0
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit c736ea34add19a3a07e0e398711847cd6b95affd
Link: https://github.com/acpica/acpica/commit/c736ea34
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 31b184052a986dc8d80c878edeca574d4ffa1cf5
Link: https://github.com/acpica/acpica/commit/31b18405
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit b11446d8b47805c2637a2286aca34b717ec6b5be
Link: https://github.com/acpica/acpica/commit/b11446d8
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 62f4f98e941d86e41969bf2ab5a93b8dc94dc49e
The update includes userspace tool signons.
Link: https://github.com/acpica/acpica/commit/62f4f98e
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
PMCG nodes were added by IORT revision C, with the unfortunate oversight
that it only defined a single base address, and thus was incapable of
properly describing PMCG implementations with PMCG_CFGR.RELOC_CTRS = 1,
where the counters are in a separate page from the control registers.
Revision D corrects this by clarifying the existing field as the page 0
base address and adding a second field to describe the page 1 address
when implemented. With the spec now fit for purpose, let's support it.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
IORT revision D contains a few additions and fixes to
currently-supported tables:
- SMMUv3 proximity domain field is enlarged to 4 bytes for consistency
with SRAT
- Root complex nodes gain an address size limit field equivalent to that
of named components
- Named component nodes gain a way to describe PASID (substream_ID)
support, encoded in their flags
Additionally, we fix a couple of outstanding points in passing:
- Add the stall support flag for named components defined in revision C
- Fix SMMUv3 HTTU override mask, which should always have been 2 bits
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
including tool signons.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 5c371879e035122c5807752f42247fd091d107d6
SMMUv3 device ID mapping index is used for SMMUv3
MSI which is introduced in IORT spec revision c,
add its support for iasl.
Tested with iasl -t IORT then get the right SMMUv3
node in iort.asl.
Link: https://github.com/acpica/acpica/commit/5c371879
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 028d331522f239fa615148273f6d10e9deadb1b3
Full support for PDTT and SDEV
Partial support for TPM2 due to odd layout of the optional
fields of the table.
Link: https://github.com/acpica/acpica/commit/028d3315
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 5ad4f0b7bf9e7ba175bd320cf7950f3b38799ff3
ACPI 6.2 adds support for the Software Delegated Exception Interface,
which is described by "Software Delegated Exception Interface (SDEI)"
ARM DEN0054A.
Add the necessary types in the ACPICA header files and support for
compiling/decompiling the table.
Link: https://github.com/acpica/acpica/commit/5ad4f0b7
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 8cadc4fb500e2aa52241e367c87a0f95d9760c58
ARM IORT specification has provision to define Proximity domain
in SMMUv3 IORT table. Adding required changes to decode
Proximity domain of SMMUv3 IORT table.
Link: https://github.com/acpica/acpica/commit/8cadc4fb
Signed-off-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit d00a4eb86e64bb4fa70f57ab5e5ca0a4ca2ad8ef
IORT revision C has been published with a number of new SMMU
implementation identifiers; define them.
Link: https://github.com/acpica/acpica/commit/d00a4eb8
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit b922ecaf9053dae3b8933664e951ed1ee8f86f07
Update to new version of the TCG/ACPI spec.
Does not include table compiler or disassembler support.
Link: https://github.com/acpica/acpica/commit/b922ecaf
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Update the ACPICA code in the kernel to upstream revision
20170303 which includes:
* Minor fixes and improvements in the core code (Bob Moore,
Seunghun Han).
* Debugger fixes (Colin Ian King, Lv Zheng).
* Compiler/disassembler improvements (Bob Moore, David Box,
Lv Zheng).
* Build-related update (Lv Zheng).
- Add new device IDs and platform-related information to the
ACPI drivers for Intel (LPSS) and AMD (APD) SoCs (Hanjun Guo,
Hans de Goede).
- Make it possible to quirk ACPI-enumerated devices as "always
present" on platforms where they are incorrectly reported as not
present by the AML and add the INT0002 device ID to the list of
"always present" devices (Hans de Goede).
- Fix the register information in the xpower PMIC driver and add
comments to map the registers to symbols used by AML to it
(Hans de Goede).
- Move the code turning off unused ACPI power resources during
system resume to a point after all devices have been resumed
to avoid issues with power resources that do not behave as
expected (Hans de Goede).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Ytsi
-----END PGP SIGNATURE-----
Merge tag 'acpi-extra-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to upstream revision
20170303 which adds a few minor fixes and improvements, update ACPI
SoC drivers with new device IDs, platform-related information and
similar, fix the register information in the xpower PMIC driver,
introduce a concept of "always present" devices to the ACPI device
enumeration code and use it to fix a problem with one platform, and
fix a system resume issue related to power resources.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20170303
which includes:
* Minor fixes and improvements in the core code (Bob Moore,
Seunghun Han).
* Debugger fixes (Colin Ian King, Lv Zheng).
* Compiler/disassembler improvements (Bob Moore, David Box, Lv
Zheng).
* Build-related update (Lv Zheng).
- Add new device IDs and platform-related information to the ACPI
drivers for Intel (LPSS) and AMD (APD) SoCs (Hanjun Guo, Hans de
Goede).
- Make it possible to quirk ACPI-enumerated devices as "always
present" on platforms where they are incorrectly reported as not
present by the AML and add the INT0002 device ID to the list of
"always present" devices (Hans de Goede).
- Fix the register information in the xpower PMIC driver and add
comments to map the registers to symbols used by AML to it (Hans de
Goede).
- Move the code turning off unused ACPI power resources during system
resume to a point after all devices have been resumed to avoid
issues with power resources that do not behave as expected (Hans de
Goede)"
* tag 'acpi-extra-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (22 commits)
ACPI / power: Delay turning off unused power resources after suspend
ACPI / PMIC: xpower: Fix power_table addresses
ACPI / LPSS: Call pwm_add_table() for Bay Trail PWM device
ACPICA: Update version to 20170303
ACPICA: iasl: add ASL conversion tool
ACPICA: Local cache support: Allow small cache objects
ACPICA: Disassembler: Do not unconditionally remove temporary names
ACPICA: iasl: Fix IORT SMMU GSI disassembling
ACPICA: Cleanup AML opcode definitions, no functional change
ACPICA: Debugger: Add interpreter blocking mark for single-step mode
ACPICA: debugger: fix memory leak on Pathname
ACPICA: Update for automatic repair code for objects returned by evaluate_object
ACPICA: Namespace: fix operand cache leak
ACPICA: Fix several incorrect invocations of ACPICA return macro
ACPICA: Fix a module for excessive debug output
ACPICA: Update some function headers, no funtional change
ACPICA: Disassembler: Enhance resource descriptor detection
i2c: designware: Add ACPI HID for Hisilicon Hip07/08 I2C controller
ACPI / APD: Add clock frequency for Hisilicon Hip07/08 I2C controller
ACPI / bus: Add INT0002 to list of always-present devices
...
ACPICA commit c04d310039d3e0ed1cb62876fe7e596fbc75ab01
ACPICA commit a65c1df7e6b4bad8e37df822018c40c6c446add9
The key feature of this utility is that the original comments within
the input ASL files are preserved during the conversion process, and
included within the converted ASL+ file -- thus creating a transparent
conversion of existing ASL files to ASL+ (ASL 2.0)
This patch is an automatic generation of the ASL converter commit,
Linux kernel isn't affected by the functionality provided in this
commit, but requires the linuxized changes to support future ACPICA
release automation.
Link: https://github.com/acpica/acpica/commit/c04d3100
Link: https://github.com/acpica/acpica/commit/a65c1df7
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Jung-uk Kim <jkim@FreeBSD.org>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 637b88de24a78c20478728d9d66632b06fcaa5bf
If the IORT template is compiled and then iort.aml binary disassembled to
iort.dsl, SMMUv1 node lists incorrect offset for SMMU_Nsg_cfg_irpt Interrupt:
[0ECh 0236 8] SMMU_Nsg_irpt Interrupt : 0000000000000000
[0ECh 0236 8] SMMU_Nsg_cfg_irpt Interrupt : 0000000000000000
This is because iasl hasn't implemented SMMU GSI decoding yet.
This patch fixes this issue by preparing structures for decoding IORT SMMU
GSI. ACPICA BZ 1340, reported by Alexei Fedorov, fixed by Lv Zheng.
Link: https://github.com/acpica/acpica/commit/637b88de
Link: https://bugs.acpica.org/show_bug.cgi?id=1340
Reported-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Remove a useless constant that slipped through me when I did the code
review. This commit fixes the issue.
Cc: Jiandi An <anjiandi@codeaurora.org>
Fixes: 69c558de63c7 ("tpm/tpm_crb: Enable TPM CRB interface for ARM64")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
TCG ACPI Specification Family "1.2" and "2.0" Version 1.2
Revision 8 introduces new start method for ARM SMC.
- Add new start method (type 11) for ARM SMC
- Add start method specific parameters offset for ARM SMC start method
Signed-off-by: Jiandi An <anjiandi@codeaurora.org>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> (on x86/PTT)
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
ACPICA commit 16577e5265923f4999b4d2c0addb2343b18135e1
Affects all files.
Link: https://github.com/acpica/acpica/commit/16577e52
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
