When using .set_coalesce interface to set all queue coalescing
parameters, we need to update both per-queue and global save values.
Fixes: 394bd87764 ("virtio_net: support per queue interrupt coalesce command")
Cc: Gavin Li <gavinl@nvidia.com>
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since virtio-net allows switching napi_tx for per txq, we have to
get the specific txq's result now.
Fixes: 394bd87764 ("virtio_net: support per queue interrupt coalesce command")
Cc: Gavin Li <gavinl@nvidia.com>
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Background:
1. Commit 0c465be183 ("virtio_net: ethtool tx napi configuration") uses
tx-frames to toggle napi_tx (0 off and 1 on) if notification coalescing
is not supported.
2. Commit 31c03aef9b ("virtio_net: enable napi_tx by default") enables
napi_tx for all txqs by default.
Status:
When virtio-net supports notification coalescing, after initialization,
tx-frames is 0 and napi_tx is true.
Problem:
When the user only wants to set rx coalescing params using
ethtool -C eth0 rx-usecs 10, or
ethtool -Q eth0 queue_mask 0x1 -C rx-usecs 10,
these cmds will carry tx-frames as 0, causing the napi_tx switching condition
is satisfied. Then the user gets:
netlink error: Device or resource busy.
The same happens when trying to set rx-frames, adaptive_rx, adaptive_tx...
How to fix:
When notification coalescing feature is negotiated, initially make the
value of tx-frames to be consistent with napi_tx.
For compatibility with the past, it is still supported to use tx-frames
to toggle napi_tx.
Reported-by: Xiaoming Zhao <zxm377917@alibaba-inc.com>
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZSXLzwAKCRDbK58LschI
g1wuAQDTT1mrUmRqrpPob/U3HCcTg64hgdRwyF+6IU39/+neGwEAoP0FKZoy3DDf
C8FOdVChBjapPsp9zTeYPv0nlZMITAE=
=1Shl
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-10-11
We've added 14 non-merge commits during the last 5 day(s) which contain
a total of 12 files changed, 398 insertions(+), 104 deletions(-).
The main changes are:
1) Fix s390 JIT backchain issues in the trampoline code generation which
previously clobbered the caller's backchain, from Ilya Leoshkevich.
2) Fix zero-size allocation warning in xsk sockets when the configured
ring size was close to SIZE_MAX, from Andrew Kanner.
3) Fixes for bpf_mprog API that were found when implementing support
in the ebpf-go library along with selftests, from Daniel Borkmann
and Lorenz Bauer.
4) Fix riscv JIT to properly sign-extend the return register in programs.
This fixes various test_progs selftests on riscv, from Björn Töpel.
5) Fix verifier log for async callback return values where the allowed
range was displayed incorrectly, from David Vernet.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
s390/bpf: Fix unwinding past the trampoline
s390/bpf: Fix clobbering the caller's backchain in the trampoline
selftests/bpf: Add testcase for async callback return value failure
bpf: Fix verifier log for async callback return values
xdp: Fix zero-size allocation warning in xskq_create()
riscv, bpf: Track both a0 (RISC-V ABI) and a5 (BPF) return values
riscv, bpf: Sign-extend return values
selftests/bpf: Make seen_tc* variable tests more robust
selftests/bpf: Test query on empty mprog and pass revision into attach
selftests/bpf: Adapt assert_mprog_count to always expect 0 count
selftests/bpf: Test bpf_mprog query API via libbpf and raw syscall
bpf: Refuse unused attributes in bpf_prog_{attach,detach}
bpf: Handle bpf_mprog_query with NULL entry
bpf: Fix BPF_PROG_QUERY last field check
====================
Link: https://lore.kernel.org/r/20231010223610.3984-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A bitset without mask in a _SET request means we want exactly the bits in
the bitset to be set. This works correctly for compact format but when
verbose format is parsed, ethnl_update_bitset32_verbose() only sets the
bits present in the request bitset but does not clear the rest. The commit
6699170376 fixes this issue by clearing the whole target bitmap before we
start iterating. The solution proposed brought an issue with the behavior
of the mod variable. As the bitset is always cleared the old val will
always differ to the new val.
Fix it by adding a new temporary variable which save the state of the old
bitmap.
Fixes: 6699170376 ("ethtool: fix application of verbose no_mask bitset")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231009133645.44503-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEDs2BvajyNKlf9TJQvlAcSiqKBOgFAmUjqCwTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRC+UBxKKooE6HJUB/sGBLojDlbGAqMFwhCmZ6ZNLg3xQcrB
SNgIxA87jsMfSCGX9vkhkaXfNLOgDE2zYe4i2QB4M1iMatVY4MSY2vtJbw8oL6dr
X6zT9STwFPBVlH/CIqfCq9eQNhKrIQ65khmYg2DtFJCBuZniBrhfZLwVROUj3FXr
FUIAMNjn9Xtj2R5JwtOtn5hvdzO8z3dCQMtzqFVm9pSm5LJVkTGaDe85t/mkLdS2
stwlbGPVz+WElHueBDEjfbxiWnPgpEVSbuThTRxS0M5+a96uVHa4F+SFGgkSdYlI
2MQUGiJ797qZTy2MvkGaqa/1/uqcmNOWNm8NqzLfg4LQMvnFW8/qAaV8
=9CD6
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-6.6-20231009' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2023-10-09
Lukas Magel's patch for the CAN ISO-TP protocol fixes the TX state
detection and wait behavior.
John Watts contributes a patch to only show the sun4i_can Kconfig
option on ARCH_SUNXI.
A patch by Miquel Raynal fixes the soft-reset workaround for Renesas
SoCs in the sja1000 driver.
Markus Schneider-Pargmann's patch for the tcan4x5x m_can glue driver
fixes the id2 register for the tcan4553.
2 patches by Haibo Chen fix the flexcan stop mode for the imx93 SoC.
* tag 'linux-can-fixes-for-6.6-20231009' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: tcan4x5x: Fix id2_register for tcan4553
can: flexcan: remove the auto stop mode for IMX93
can: sja1000: Always restart the Tx queue after an overrun
arm64: dts: imx93: add the Flex-CAN stop mode by GPR
can: sun4i_can: Only show Kconfig if ARCH_SUNXI is set
can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior
====================
Link: https://lore.kernel.org/r/20231009085256.693378-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sili Luo reported a race in nfc_llcp_sock_get(), leading to UAF.
Getting a reference on the socket found in a lookup while
holding a lock should happen before releasing the lock.
nfc_llcp_sock_get_sn() has a similar problem.
Finally nfc_llcp_recv_snl() needs to make sure the socket
found by nfc_llcp_sock_from_sn() does not disappear.
Fixes: 8f50020ed9 ("NFC: LLCP late binding")
Reported-by: Sili Luo <rootlab@huawei.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231009123110.3735515-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Our current route lookups (mctp_route_lookup and mctp_route_lookup_null)
traverse the net's route list without the RCU read lock held. This means
the route lookup is subject to preemption, resulting in an potential
grace period expiry, and so an eventual kfree() while we still have the
route pointer.
Add the proper read-side critical section locks around the route
lookups, preventing premption and a possible parallel kfree.
The remaining net->mctp.routes accesses are already under a
rcu_read_lock, or protected by the RTNL for updates.
Based on an analysis from Sili Luo <rootlab@huawei.com>, where
introducing a delay in the route lookup could cause a UAF on
simultaneous sendmsg() and route deletion.
Reported-by: Sili Luo <rootlab@huawei.com>
Fixes: 889b7da23a ("mctp: Add initial routing framework")
Cc: stable@vger.kernel.org
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/29c4b0e67dc1bf3571df3982de87df90cae9b631.1696837310.git.jk@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When functions called by the trampoline panic, the backtrace that is
printed stops at the trampoline, because the trampoline does not store
its caller's frame address (backchain) on stack; it also stores the
return address at a wrong location.
Store both the same way as is already done for the regular eBPF programs.
Fixes: 528eb2cb87 ("s390/bpf: Implement arch_prepare_bpf_trampoline()")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20231010203512.385819-3-iii@linux.ibm.com
One of the first things that s390x kernel functions do is storing the
the caller's frame address (backchain) on stack. This makes unwinding
possible. The backchain is always stored at frame offset 152, which is
inside the 160-byte stack area, that the functions allocate for their
callees. The callees must preserve the backchain; the remaining 152
bytes they may use as they please.
Currently the trampoline uses all 160 bytes, clobbering the backchain.
This causes kernel panics when using __builtin_return_address() in
functions called by the trampoline.
Fix by reducing the usage of the caller-reserved stack area by 8 bytes
in the trampoline.
Fixes: 528eb2cb87 ("s390/bpf: Implement arch_prepare_bpf_trampoline()")
Reported-by: Song Liu <song@kernel.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20231010203512.385819-2-iii@linux.ibm.com
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCZSOs8wAKCRCAXGG7T9hj
vhGgAPkBL1D9vYQiI6TDB5U1Ss7LYaJEvZmLgzVvG15+nUwo5AD8CwZY2ADkCB9K
87m9r1wUh8KXZK+AQNpCv+1rl8/x1gY=
=9q+d
-----END PGP SIGNATURE-----
Merge tag 'xsa441-6.6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A fix for the xen events driver:
Closing of an event channel in the Linux kernel can result in a
deadlock. This happens when the close is being performed in parallel
to an unrelated Xen console action and the handling of a Xen console
interrupt in an unprivileged guest.
The closing of an event channel is e.g. triggered by removal of a
paravirtual device on the other side. As this action will cause
console messages to be issued on the other side quite often, the
chance of triggering the deadlock is not negligible"
* tag 'xsa441-6.6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/events: replace evtchn_rwlock with RCU
Static calls invocations aren't well supported from module __init and
__exit functions. Especially the static call from cleanup_trusted() led
to a crash on x86 kernel with CONFIG_DEBUG_VIRTUAL=y.
However, the usage of static call invocations for trusted_key_init()
and trusted_key_exit() don't add any value from either a performance or
security perspective. Hence switch to use indirect function calls instead.
Note here that although it will fix the current crash report, ultimately
the static call infrastructure should be fixed to either support its
future usage from module __init and __exit functions or not.
Reported-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Link: https://lore.kernel.org/lkml/ZRhKq6e5nF%2F4ZIV1@fedora/#t
Fixes: 5d0682be31 ("KEYS: trusted: Add generic trusted keys framework")
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Fix the fail of the Qualcomm PDC driver on v3.2 hardware which is
caused by a control bit being moved to a different location
- Update the SM8150 device tree PDC resource so the version register can
be read
- Make the Renesas RZG2L driver correct for interrupts which are outside
of the LSB in the TSSR register by using the proper macro for
calculating the mask
- Document the Renesas RZ2GL device tree binding correctly and update
them for a few devices which faul to boot otherwise
- Use the proper accessor in the RZ2GL driver instead of blindly
dereferencing an unchecked pointer
- Make GICv3 handle the dma-non-coherent attribute correctly
- Ensure that all interrupt controller nodes on RISCV are marked as
initialized correctly
Maintainer changes:
- Add a new entry for GIC interrupt controllers and assign Marc Zyngier
as the maintainer
- Remove Marc Zyngier from the core and driver maintainer entries as he
is burried in work and short of time to handle that.
Thanks to Marc for all the great work he has done in the past couple of
years!
-----BEGIN PGP SIGNATURE-----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=ybNS
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2023-10-10-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of updates for interrupt chip drivers:
- Fix the fail of the Qualcomm PDC driver on v3.2 hardware which is
caused by a control bit being moved to a different location
- Update the SM8150 device tree PDC resource so the version register
can be read
- Make the Renesas RZG2L driver correct for interrupts which are
outside of the LSB in the TSSR register by using the proper macro
for calculating the mask
- Document the Renesas RZ2GL device tree binding correctly and update
them for a few devices which faul to boot otherwise
- Use the proper accessor in the RZ2GL driver instead of blindly
dereferencing an unchecked pointer
- Make GICv3 handle the dma-non-coherent attribute correctly
- Ensure that all interrupt controller nodes on RISCV are marked as
initialized correctly
Maintainer changes:
- Add a new entry for GIC interrupt controllers and assign Marc
Zyngier as the maintainer
- Remove Marc Zyngier from the core and driver maintainer entries as
he is burried in work and short of time to handle that.
Thanks to Marc for all the great work he has done in the past couple
of years!
Also note that commit 5873d380f4 ("irqchip/qcom-pdc: Add support for
v3.2 HW") has a incorrect SOB chain.
The real author is Neil. His patch was posted by Dmitry once and Neil
picked it up from the list and reposted it with the bogus SOB chain.
Not a big deal, but worth to mention. I wanted to fix that up, but
then got distracted and Marc piled more changes on top. So I decided
to leave it as is instead of rebasing world"
* tag 'irq-urgent-2023-10-10-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Remove myself from the general IRQ subsystem maintenance
MAINTAINERS: Add myself as the ARM GIC maintainer
irqchip/renesas-rzg2l: Convert to irq_data_get_irq_chip_data()
irqchip/stm32-exti: add missing DT IRQ flag translation
irqchip/riscv-intc: Mark all INTC nodes as initialized
irqchip/gic-v3: Enable non-coherent redistributors/ITSes DT probing
irqchip/gic-v3-its: Split allocation from initialisation of its_node
dt-bindings: interrupt-controller: arm,gic-v3: Add dma-noncoherent property
dt-bindings: interrupt-controller: renesas,irqc: Add r8a779f0 support
dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/G2UL SoC
irqchip: renesas-rzg2l: Fix logic to clear TINT interrupt source
dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Update description for '#interrupt-cells' property
arm64: dts: qcom: sm8150: extend the size of the PDC resource
irqchip/qcom-pdc: Add support for v3.2 HW
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmUk4fcTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXhhqCACWsBYTB0EJ3oMJnzfnHeuN418ZDx/O
AL0k0O5MT6roEFmvGUhzJ/jsoxL+W+Wj3aFwzReyOSQpgjTTF/Ja26LPvxRzDxKi
sZPojnR2ykW31l7y+eh1p9qSM/aYvTMDP5zO7L1fBnWMAGMv8w8RezpCJ7bh4BgA
FTMZZrvKYVT9hCGkYqKUZGBtDTPZ56WE+MCiRxTWQvF+4QKaIff0tpno8V7203bE
D/b4+Ouh19RXFTC5dUq/0JtAdV2AadrPHnScUupc8Hk/MMFiU5CzvH4bAqiwXBcU
YqqlD3kZbIqqbKE93+03jvyrRDvDGlq+rpA3KMk5MBAfrkM4DytpWvMs
=SVq1
-----END PGP SIGNATURE-----
Merge tag 'hyperv-fixes-signed-20231009' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- fixes for Hyper-V VTL code (Saurabh Sengar and Olaf Hering)
- fix hv_kvp_daemon to support keyfile based connection profile
(Shradha Gupta)
* tag 'hyperv-fixes-signed-20231009' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
hv/hv_kvp_daemon:Support for keyfile based connection profile
hyperv: reduce size of ms_hyperv_info
x86/hyperv: Add common print prefix "Hyper-V" in hv_init
x86/hyperv: Remove hv_vtl_early_init initcall
x86/hyperv: Restrict get_vtl to only VTL platforms
Here is the collection of pending fixes since a couple of weeks ago,
which became slightly bigger than usual due to my vacation.
Most of changes are about ASoC device-specific fixes while USB- and
HD-audio received quirks as usual. All fixes, including two ASoC core
changes, are reasonably small and safe to apply.
-----BEGIN PGP SIGNATURE-----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=2SOT
-----END PGP SIGNATURE-----
Merge tag 'sound-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of pending fixes since a couple of weeks ago, which
became slightly bigger than usual due to my vacation.
Most of changes are about ASoC device-specific fixes while USB- and
HD-audio received quirks as usual. All fixes, including two ASoC core
changes, are reasonably small and safe to apply"
* tag 'sound-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ALSA: usb-audio: Fix microphone sound on Nexigo webcam.
ALSA: hda/realtek: Change model for Intel RVP board
ALSA: usb-audio: Fix microphone sound on Opencomm2 Headset
ALSA: hda: cs35l41: Cleanup and fix double free in firmware request
ASoC: dt-bindings: fsl,micfil: Document #sound-dai-cells
ASoC: amd: yc: Fix non-functional mic on Lenovo 82YM
ASoC: tlv320adc3xxx: BUG: Correct micbias setting
ASoC: rt5682: Fix regulator enable/disable sequence
ASoC: hdmi-codec: Fix broken channel map reporting
ASoC: core: Do not call link_exit() on uninitialized rtd objects
ASoC: core: Print component name when printing log
ASoC: SOF: amd: fix for firmware reload failure after playback
ASoC: fsl-asoc-card: use integer type for fll_id and pll_id
ASoC: fsl_sai: Don't disable bitclock for i.MX8MP
dt-bindings: ASoC: rockchip: Add compatible for RK3128 spdif
ASoC: soc-generic-dmaengine-pcm: Fix function name in comment
ALSA: hda/realtek - ALC287 merge RTK codec with CS CS35L41 AMP
ASoC: simple-card: fixup asoc_simple_probe() error handling
ASoC: simple-card-utils: fixup simple_util_startup() error handling
ASoC: Intel: sof_sdw: add support for SKU 0B14
...
Add comments for nlpid, family, udlen and udata in struct nft_table, and
afinfo is no longer a member of struct nft_table, so remove the comment
for it.
Signed-off-by: George Guo <guodongtai@kylinos.cn>
Signed-off-by: Florian Westphal <fw@strlen.de>
pr_debug doesn't provide any information other than that a packet
did not match existing state but also was found to not create a new
connection.
Replaces this with tcp_error_log, which will also dump packets'
content so one can see if this is a stray FIN or RST.
Signed-off-by: Florian Westphal <fw@strlen.de>
nf_conntrack_alter_reply doesn't do helper reassignment anymore.
Remove the comments that make this claim.
Furthermore, remove dead code from the function and place ot
in nf_conntrack.h.
Signed-off-by: Florian Westphal <fw@strlen.de>
Since struct netlink_callback::args is not used by rule dumpers anymore,
use it to hold nft_rule_dump_ctx. Add a build-time check to make sure it
won't ever exceed the available space.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
In order to move the context into struct netlink_callback's scratch
area, the latter must be unused first.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
This relieves the dump callback from having to check nlmsg_type upon
each call and instead performs the check once in .start callback.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
None of the dump callbacks uses netlink_callback::args beyond the first
element, no need to zero the data.
Fixes: 96518518cc ("netfilter: add nftables")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
It will move into struct netlink_callback's scratch area later, just put
nf_tables_dump_rules_start in shape to reduce churn later.
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
This reverts commit 5f521494cc.
The patch breaks mounts with security mount options like
$ mount -o context=system_u:object_r:root_t:s0 /dev/sdX /mn
mount: /mnt: wrong fs type, bad option, bad superblock on /dev/sdX, missing codepage or helper program, ...
We cannot reject all unknown options in btrfs_parse_subvol_options() as
intended, the security options can be present at this point and it's not
possible to enumerate them in a future proof way. This means unknown
mount options are silently accepted like before when the filesystem is
mounted with either -o subvol=/path or as followup mounts of the same
device.
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 1e66220948 ("net/mlx5e: Update rx ring hw mtu upon each rx-fcs
flag change") seems to have accidentally inverted the logic added in
commit 0bc73ad46a ("net/mlx5e: Mutually exclude RX-FCS and
RX-port-timestamp").
The impact of this is a little unclear since it seems the FCS scattered
with RX-FCS is (usually?) correct regardless.
Fixes: 1e66220948 ("net/mlx5e: Update rx ring hw mtu upon each rx-fcs flag change")
Tested-by: Charlotte Tan <charlotte@extrahop.com>
Reviewed-by: Charlotte Tan <charlotte@extrahop.com>
Cc: Adham Faris <afaris@nvidia.com>
Cc: Aya Levin <ayal@nvidia.com>
Cc: Tariq Toukan <tariqt@nvidia.com>
Cc: Moshe Shemesh <moshe@nvidia.com>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Will Mortensen <will@extrahop.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20231006053706.514618-1-will@extrahop.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It is not necessary to call of_match_device() in probe. If we made it to
probe, then we've already successfully matched.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231006214421.339445-1-robh@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Petr Machata says:
====================
mlxsw: Fix -Wformat-truncation warnings
Ido Schimmel writes:
Commit 6d4ab2e97d ("extrawarn: enable format and stringop overflow
warnings in W=1") enabled format warnings as part of W=1 builds,
resulting in two new warnings in mlxsw. Fix both and target at net-next
as the warnings are not indicative of actual bugs.
====================
Link: https://lore.kernel.org/r/cover.1696600763.git.petrm@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ethtool stats strings cannot be longer than 32 characters
('ETH_GSTRING_LEN'), including the terminating null byte. The format
string '%.29s_%.1d' can exceed this limitation if the per-TC counter
name exceeds 28 characters. Together with the underscore, the two digits
of the TC (bounded at 16) and the terminating null byte, more than 32
characters will be used.
Fix this by bounding the counter name at 28 characters which suppresses
the following build warning [1]. This does not affect ethtool output
since the longest counter name does not exceed this limitation.
[1]
drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c: In function ‘mlxsw_sp_port_get_strings’:
drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c:622:58: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
622 | snprintf(*p, ETH_GSTRING_LEN, "%.29s_%.1d",
| ^
In function ‘mlxsw_sp_port_get_tc_strings’,
inlined from ‘mlxsw_sp_port_get_strings’ at drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c:677:4:
drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c:622:17: note: ‘snprintf’ output between 3 and 33 bytes into a destination of size 32
622 | snprintf(*p, ETH_GSTRING_LEN, "%.29s_%.1d",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
623 | mlxsw_sp_port_hw_tc_stats[i].str, tc);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c: In function ‘mlxsw_sp_port_get_strings’:
drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c:622:58: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
622 | snprintf(*p, ETH_GSTRING_LEN, "%.29s_%.1d",
| ^
In function ‘mlxsw_sp_port_get_tc_strings’,
inlined from ‘mlxsw_sp_port_get_strings’ at drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c:677:4:
drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c:622:17: note: ‘snprintf’ output between 3 and 33 bytes into a destination of size 32
622 | snprintf(*p, ETH_GSTRING_LEN, "%.29s_%.1d",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
623 | mlxsw_sp_port_hw_tc_stats[i].str, tc);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The name of a thermal zone device cannot be longer than 19 characters
('THERMAL_NAME_LENGTH - 1'). The format string 'mlxsw-lc%d-gearbox%d'
can exceed this limitation if the maximum number of line cards and the
maximum number of gearboxes on each line card cannot be represented
using a single digit.
This is not the case with current systems nor future ones. Therefore,
increase the size of the result buffer beyond 'THERMAL_NAME_LENGTH' and
suppress the following build warning [1].
If this limitation is ever exceeded, we will know about it since the
thermal core validates the thermal device's name during registration.
[1]
drivers/net/ethernet/mellanox/mlxsw/core_thermal.c: In function ‘mlxsw_thermal_gearboxes_init.constprop’:
drivers/net/ethernet/mellanox/mlxsw/core_thermal.c:543:71: error: ‘%d’ directive output may be truncated writing between 1 and 3 bytes into a region of size between 1 and 3
[-Werror=format-truncation=]
543 | snprintf(tz_name, sizeof(tz_name), "mlxsw-lc%d-gearbox%d",
| ^~
In function ‘mlxsw_thermal_gearbox_tz_init’,
inlined from ‘mlxsw_thermal_gearboxes_init.constprop’ at drivers/net/ethernet/mellanox/mlxsw/core_thermal.c:611:9:
drivers/net/ethernet/mellanox/mlxsw/core_thermal.c:543:52: note: directive argument in the range [1, 255]
543 | snprintf(tz_name, sizeof(tz_name), "mlxsw-lc%d-gearbox%d",
| ^~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/mellanox/mlxsw/core_thermal.c:543:17: note: ‘snprintf’ output between 19 and 23 bytes into a destination of size 20
543 | snprintf(tz_name, sizeof(tz_name), "mlxsw-lc%d-gearbox%d",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
544 | gearbox_tz->slot_index, gearbox_tz->module + 1);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When the SMC protocol is built into the kernel proper while ISM is
configured to be built as module, linking the kernel fails due to
unresolved dependencies out of net/smc/smc_ism.o to
ism_get_smcd_ops, ism_register_client, and ism_unregister_client
as reported via the linux-next test automation (see link).
This however is a bug introduced a while ago.
Correct the dependency list in ISM's and SMC's Kconfig to reflect the
dependencies that are actually inverted. With this you cannot build a
kernel with CONFIG_SMC=y and CONFIG_ISM=m. Either ISM needs to be 'y',
too - or a 'n'. That way, SMC can still be configured on non-s390
architectures that do not have (nor need) an ISM driver.
Fixes: 89e7d2ba61 ("net/ism: Add new API for client registration")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/linux-next/d53b5b50-d894-4df8-8969-fd39e63440ae@infradead.org/
Co-developed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20231006125847.1517840-1-gbayer@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The adapter->vf_mvs.l list needs to be initialized even if the list is
empty. Otherwise it will lead to crashes.
Fixes: a1cbb15c13 ("ixgbe: Add macvlan support for VF")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Link: https://lore.kernel.org/r/ZSADNdIw8zFx1xw2@kadam
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Address an issue in ksz9477_acl_move_entries() where, in the scenario
(src_idx == dst_idx), ksz9477_validate_and_get_src_count() returns 0,
leading to usage of uninitialized src_count and dst_count variables,
which causes undesired behavior as it attempts to move ACL entries
around.
Fixes: 002841be13 ("net: dsa: microchip: Add partial ACL support for ksz9477 switches")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231006115822.144152-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When updating the SA, use the new update_pn flags instead of comparing the
new PN with the initial one.
Comparing the initial PN value with the new value will allow the user
to update the SA using the initial PN value as a parameter like this:
$ ip macsec add macsec0 tx sa 0 pn 1 on key 00 \
ead3664f508eb06c40ac7104cdae4ce5
$ ip macsec set macsec0 tx sa 0 pn 1 off
Fixes: 8ff0ac5be1 ("net/mlx5: Add MACsec offload Tx command support")
Fixes: aae3454e4d ("net/mlx5e: Add MACsec offload Rx command support")
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Updating the PN is not supported.
Return -EINVAL if update_pn is true.
The following command succeeded, but it should fail because the driver
does not update the PN:
ip macsec set macsec0 tx sa 0 pn 232 on
Fixes: 28c5107aa9 ("net: phy: mscc: macsec support")
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When updating SA, update the PN only when the update_pn flag is true.
Otherwise, the PN will be reset to its previous value using the
following command and this should not happen:
$ ip macsec set macsec0 tx sa 0 on
Fixes: c54ffc7360 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Indicate next PN update using update_pn flag in macsec_context.
Offloaded MACsec implementations does not know whether or not the
MACSEC_SA_ATTR_PN attribute was passed for an SA update and assume
that next PN should always updated, but this is not always true.
The PN can be reset to its initial value using the following command:
$ ip macsec set macsec0 tx sa 0 off #octeontx2-pf case
Or, the update PN command will succeed even if the driver does not support
PN updates.
$ ip macsec set macsec0 tx sa 0 pn 1 on #mscc phy driver case
Comparing the initial PN with the new PN value is not a solution. When
the user updates the PN using its initial value the command will
succeed, even if the driver does not support it. Like this:
$ ip macsec add macsec0 tx sa 0 pn 1 on key 00 \
ead3664f508eb06c40ac7104cdae4ce5
$ ip macsec set macsec0 tx sa 0 pn 1 on #mlx5 case
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
David Morley says:
====================
tcp: save flowlabel and use for receiver repathing
This patch series stores the last received ipv6 flowlabel. This last
received flowlabel is then used to help decide whether a packet is
likely an RTO retransmit or the result of a TLP. This new information
is used to better inform the flowlabel change decision for data
receivers.
====================
Link: https://lore.kernel.org/r/20231006011841.3558307-1-morleyd.kernel@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This commit changes the data receiver repath behavior to occur after
receiving a single duplicate. This can help recover ACK connectivity
quicker if a TLP was sent along a nonworking path.
For instance, consider the case where we have an initially nonworking
forward path and reverse path and subsequently switch to only working
forward paths. Before this patch we would have the following behavior.
+---------+--------+--------+----------+----------+----------+
| Event | For FL | Rev FL | FP Works | RP Works | Data Del |
+---------+--------+--------+----------+----------+----------+
| Initial | A | 1 | N | N | 0 |
+---------+--------+--------+----------+----------+----------+
| TLP | A | 1 | N | N | 0 |
+---------+--------+--------+----------+----------+----------+
| RTO 1 | B | 1 | Y | N | 1 |
+---------+--------+--------+----------+----------+----------+
| RTO 2 | C | 1 | Y | N | 2 |
+---------+--------+--------+----------+----------+----------+
| RTO 3 | D | 2 | Y | Y | 3 |
+---------+--------+--------+----------+----------+----------+
This patch gets rid of at least RTO 3, avoiding additional unnecessary
repaths of a working forward path to a (potentially) nonworking one.
In addition, this commit changes the behavior to avoid repathing upon
rx of duplicate data if the local endpoint is in CA_Loss (in which
case the RTOs will already be changing the outgoing flowlabel).
Signed-off-by: David Morley <morleyd@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Tested-by: David Morley <morleyd@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In order to better estimate whether a data packet has been
retransmitted or is the result of a TLP, we save the last received
ipv6 flowlabel.
To make space for this field we resize the "ato" field in
inet_connection_sock as the current value of TCP_DELACK_MAX can be
fully contained in 8 bits and add a compile_time_assert ensuring this
field is the required size.
v2: addressed kernel bot feedback about dccp_delack_timer()
v3: addressed build error introduced by commit bbf80d713f ("tcp:
derive delack_max from rto_min")
Signed-off-by: David Morley <morleyd@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Tested-by: David Morley <morleyd@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit ff48b37802 ("scsi: Do not attempt to rescan suspended devices")
modified scsi_rescan_device() to avoid attempting rescanning a suspended
device. However, the modification added a check to verify that a SCSI
device is in the running state without checking if the device request
queue (in the case of block device) is also running, thus allowing the
exectuion of internal requests. Without checking the device request
queue, commit ff48b37802 fix is incomplete and deadlocks on resume can
still happen. Use blk_queue_pm_only() to check if the device request
queue allows executing commands in addition to checking the SCSI device
state.
Reported-by: Petr Tesarik <petr@tesarici.cz>
Fixes: ff48b37802 ("scsi: Do not attempt to rescan suspended devices")
Cc: stable@vger.kernel.org
Tested-by: Petr Tesarik <petr@tesarici.cz>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
fit3 protocol driver does not support accessing IDE control registers
(device control/altstatus). The DOS driver does not use these registers
either (as observed from DOSEMU trace). But the HW seems to be capable
of accessing these registers - I simply tried bit 3 and it works!
The control register is required to properly reset ATAPI devices or
they will be detected only once (after a power cycle).
Tested with EXP Computer CD-865 with MC-1285B EPP cable and
TransDisk 3000.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Some parallel adapters (e.g. EXP Computer MC-1285B EPP Cable) return
bogus values when there's no master device present. This can cause
reset to fail, preventing the lone slave device (such as EXP Computer
CD-865) from working.
Add custom version of wait_after_reset that ignores master failure when
a slave device is present. The custom version is also needed because
the generic ata_sff_wait_after_reset uses direct port I/O for slave
device detection.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
