A simple DRM/KMS driver for the TI LCD Controller found in various
smaller TI parts (AM33xx, OMAPL138, etc). This driver uses the
CMA helpers. Currently only the TFP410 DVI encoder is supported
(tested with beaglebone + DVI cape). There are also various LCD
displays, for which support can be added (as I get hw to test on),
and an external i2c HDMI encoder found on some boards.
The display controller supports a single CRTC. And the encoder+
connector are split out into sub-devices. Depending on which LCD
or external encoder is actually present, the appropriate output
module(s) will be loaded.
v1: original
v2: fix fb refcnting and few other cleanups
v3: get +/- vsync/hsync from timings rather than panel-info, add
option DT max-bandwidth field so driver doesn't attempt to
pick a display mode with too high memory bandwidth, and other
small cleanups
v4: remove some unneeded stuff from panel-info struct, properly
set high bits for hfp/hsw/hbp for rev 2, add DT bindings docs
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Koen Kooi <koen@dominion.thruhere.net>
We need to clear the local variable to get the refcounting right
(since the reference drm_mode_setplane holds is transferred to the
plane->fb pointer). But should be done _after_ we update the pointer.
Breakage introduced in
commit 6c2a75325c
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Tue Dec 11 00:59:24 2012 +0100
drm: refcounting for sprite framebuffers
Reported-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Rob Clark <rob@ti.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
If bit 0 of the features byte (0x18) is set to 0, then, according to
the EDID spec, "the display is non-continuous frequency (multi-mode)
and is only specified to accept the video timing formats that are
listed in Base EDID and certain Extension Blocks".
For more information, please see the EDID spec, check the notes of the
table that explains the "Feature Support" byte (18h) and also the
notes on the tables of the section that explains "Display Range Limits
& Additional Timing Description Definition (tag #FDh)".
Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45729
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
/me grabs a few brown paper bags
So it looks like I've broken compilation in
commit 6aed8ec3f7
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Sun Jan 20 17:32:21 2013 +0100
drm: review locking for drm_fb_helper_restore_fbdev_mode
Fix it up again.
v2: Only deref fbdev_cma once we're sure it's non-NULL, noticed by
Thierry Reding.
Reported-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
* 'omapdrm-next' of git://people.freedesktop.org/~robclark/linux:
drm/omap: remove fbdev debug enter/leave hooks
omapdrm: simplify locking in the fb debugfs file
omapdrm: only take crtc->mutex in crtc callbacks
drm/omap: move out of staging
staging/omapdrm: Use kmemdup rather than duplicating its implementation
staging: omapdrm/omap_gem_dmabuf.c: fix memory leakage
drm/omap: Add OMAP5 support
drm/omap: Add PM capabilities
Simplify life for drivers using an encoder-slave, so that they can make
their drm_encoder_helper_funcs const, rather than needing to dynamically
allocate and populate them.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Add helper to display fb's which can be used directly in drm_info_list:
static struct drm_info_list foo_debugfs_list[] = {
...
{ "fb", drm_fb_cma_debugfs_show, 0 },
};
to display information about CMA fb objects, as well as a
drm_gem_cma_describe() which can be used if the driver bothers to keep
a list of CMA GEM objects.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Initialize e->pipe.. some drivers set this themselves, others do not.
Setting it in drm_send_vblank_event() should help ensure more consistent
behavior with the different drivers.
Signed-off-by: Rob Clark <robdclark@gmail.com>
We need to clear the local variable to get the refcounting right
(since the reference drm_mode_setplane holds is transferred to the
plane->fb pointer). But should be done _after_ we update the pointer.
Breakage introduced in
commit 6c2a75325c
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Tue Dec 11 00:59:24 2012 +0100
drm: refcounting for sprite framebuffers
Reported-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
/me grabs a few brown paper bags
So it looks like I've broken compilation in
commit 6aed8ec3f7
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Sun Jan 20 17:32:21 2013 +0100
drm: review locking for drm_fb_helper_restore_fbdev_mode
Fix it up again.
Reported-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This will result in badness for drivers that do not implement
mode_set_base_atomic(). So don't pretend like we can support this.
Signed-off-by: Rob Clark <robdclark@gmail.com>
We don't need to hold onto mode_config.mutex any more to keep the fb
objects around. And locking dev->struct_mutex is also not required,
since omap_gem_describe only reads data anyway. And for a debug
interface it's better to grab fewer locks in case the driver is
deadlocked already ...
The only thing we need is to hold onto mode_config.fb_lock to ensure
the user-created fbs don't disappear. The fbcon fb doesn't need any
protection, since it lives as long as the driver (and so the debugfs
files) itself. And if the teardown/setup isn't following the right
sequence grabbing locks won't prevent a NULL deref on priv->fbdev if
the fb is not yet (or no longer) there.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Omapdrm doesn't do anything nefarious with crtc load detection or has
any shared resources, so this is enough. We also need to adjust the
WARN_ON.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Now that the omapdss interface has been reworked so that omapdrm can use
dispc directly, we have been able to fix the remaining functional kms
issues with omapdrm. And in the mean time the PM sequencing and many
other of that open issues have been solved. So I think it makes sense
to finally move omapdrm out of staging.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Found with coccicheck.
The semantic patch that makes this change is available
in scripts/coccinelle/api/memdup.cocci.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a memory leakage in variable sg if it goes to error.
Signed-off-by: Cong Ding <dinggnu@gmail.com>
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for OMAP5 processor. The main differences are that the OMAP5
has 2 containers, one for 1D and one for 2D. Each container is 128MiB in
size.
Signed-off-by: Andy Gross <andy.gross@ti.com>
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added power management capabilities into the omapdrm and DMM drivers.
During suspend, we don't need to do anything to maintain the state of
the LUT. We have all the necessary information to recreate the mappings
of the GEM object list maintained by the omapdrm driver.
On resume, the DMM resume handler will first reprogram the LUT to point
to the dummy page. The subsequent resume handler in the omapdrm will call
into the DMM and reprogram each of the buffer objects. This will ensure
that all of the necessary objects will be pinned into the DMM properly.
Order of suspend/resume handlers is done by device creation. We create
the DMM device before the omapdrm, so the correct order is maintained.
Signed-off-by: Andy Gross <andy.gross@ti.com>
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's not that the assertion is incorrect, but rather that we can call
do_destroy early in loading, and we will falsely BUG().
Since contexts have been in for a while now, and in the internal APIs
are pretty stable, it should be fairly safe to remove this.
v2: Remove unused dev_priv, and dev
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The ring initialization will differ a bit in upcoming generations, and
this split will prepare the code for what's needed.
This patch also fixes a bug introduced in:
commit 9943393195
Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Date: Tue Jan 22 14:12:17 2013 +0200
drm/i915: use gem_set_seqno() on hardware init
After doing the extraction, the bad error handling became obvious. I
acknowledge that this should be two patches, but it's a pretty
small/trivial patch. If requested, I can certainly do the fix as a
distinct patch.
v2: Should be cleanup blt, not init blt on failure (Chris)
v3: Forgot to git add on v2
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When I refactored the code initially, I forgot that gen2 uses a
different bar for the CPU mappable aperture. The agp-less code knows
nothing of generations less than 5, so we have to expand the gtt_probe
function to include the mappable base and end.
It was originally broken by me:
commit baa09f5fd8
Author: Ben Widawsky <ben@bwidawsk.net>
Date: Thu Jan 24 13:49:57 2013 -0800
drm/i915: Add probe and remove to the gtt ops
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
So we can remove duplicated code. Note that this function is used not
only on IBX, but also CPT and LPT.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Also bikeshed s/ironlake_enable_pch_hotplug/ibx_enable_hotplug
to keep consistent with our ibx for pch naming scheme.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We have more than one sprite, so a boolean simply won't cut it.
Turn sprite_scaling_enabled into a bitmask and track the state
of sprite scaler for each sprite independently.
Also don't re-enable LP watermarks until the sprite registers
have actually been written, and thus sprite scaling has really
been disabled.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
They're physically the same pins and also the same bits, duplicating
only confuses the reader. This also makes it a bit obvious that we
have quite some code duplication going on here. Squashing that is for
a larger rework in our hpd handling though.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This was a rebase error from when the patches originally landed. Since
the context size is unsigned, there is also no use in checking if it's
less than 0.
The existing code is not really wrong, but it's not simple as it should
be.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
770c12312a is the first bad commit
commit 770c12312a
Author: Takashi Iwai <tiwai@suse.de>
Date: Sat Aug 11 08:56:42 2012 +0200
drm/i915: Fix blank panel at reopening lid
changed the register write sequence for restoring the backlight, which
helped prevent non-working backlights on some machines. Turns out that
the original sequence was the right thing to do for a different set of
machines. Worse, setting the backlight level _after_ enabling it seems
to reset it somehow. So we need to make that one conditional upon the
backlight having been reset to zero, and add the old one back.
Cargo-culting at it's best, but it seems to work.
Cc: stable@vger.kernel.org
Cc: Takashi Iwai <tiwai@suse.de>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47941
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is the drm fb helper cleanup, mostly motivated by strange things I've
seen in my locking rework and the i915 modeset revamp. Compared to the
original submission I've reinstated the setup flexibility you'd like to
retain, kerneldoc has been reviewed by Laurent Pinchart and Rob Clark
reviewed the code changes.
Quick overview of the changes:
- Cleaned-up library interface for drivers using the fb helper, also
simplified the fb allocation callback since no driver supported
reallocating the fb on-the-fly. And the fbdev/fbcon code keeps pointers
to the old mapping around anyway, so reallocating backing storage will
be much more work.
- No longer call the crtc helper "disable everything" function at init
time, but allow drivers to do so. Motivated by i915's fastboot effort
and allows us to drop a bunch of noop dummy functions just to avoid
calling NULL function pointers from i915.ko.
- Properly clear old state when doing modeset calls, the fb helper left
some old modes in there and unconditionally set an fb (even when
disabling a crtc). The crtc helpers didn't care, but i915 modeset code
can now drop a few special cases.
- Full kerneldoc for the fb helper. Yay!
- My version of the "don't sleep in panic ->unblank calls". The patch is
already in -mm, I guess Andrew can drop it as soon as this pull lands in
drm-next.
* 'drm-fb-helper' of git://people.freedesktop.org/~danvet/drm:
drm/fb-helper: remove unused members of struct drm_fb_helper
drm/fb-helper: don't sleep for screen unblank when an oopps is in progress
drm/fb-helper: improve kerneldoc
drm/<drivers>: simplify ->fb_probe callback
drm/fb-helper: streamline drm_fb_helper_single_fb_probe
drm/fb-helper: directly call set_par from the hotplug handler
drm/fb-helper: fixup set_config semantics
drm/i915: rip out helper->disable noop functions
drm/fb-helper: don't disable everything in initial_config
drm/tegra: don't set up initial fbcon config twice
drm/fb-helper: unexport drm_fb_helper_single_fb_probe
drm/fb-helper: unexport drm_fb_helper_panic
drm/fb-helper: kill drm_fb_helper_restore
drm: review locking for drm_fb_helper_restore_fbdev_mode
My cheapo monitor has an invalid block 1, resulting in a lot of dmesg spam every few seconds.
I get it the first time that the entire block is all 0xff..
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: stable@vger.kernel.org [v3.7]
Signed-off-by: Dave Airlie <airlied@redhat.com>
On tile architecture (with "make allyesconfig") including
<linux/swiotlb.h> is required to call swiotlb_nr_tbl().
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Move drm_pcie_get_speed_cap_mask() under #ifdef CONFIG_PCI because it
it used only for PCI devices (evergreen, r600, r770), and it uses
PCI interfaces that only exist when CONFIG_PCI=y.
Previously, we tried to compile drm_pcie_get_speed_cap_mask() even when
CONFIG_PCI=n, which fails.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
i915 driver needs to do modeset when
1. system resumes from sleep
2. lid is opened
In PM_SUSPEND_MEM state, all the GPEs are cleared when system resumes,
thus it is the i915_resume code does the modeset rather than intel_lid_notify().
But in PM_SUSPEND_FREEZE state, this will be broken because
system is still responsive to the lid events.
1. When we close the lid in Freeze state, intel_lid_notify() sets modeset_on_lid.
2. When we reopen the lid, intel_lid_notify() will do a modeset,
before the system is resumed.
here is the error log,
[92146.548074] WARNING: at drivers/gpu/drm/i915/intel_display.c:1028 intel_wait_for_pipe_off+0x184/0x190 [i915]()
[92146.548076] Hardware name: VGN-Z540N
[92146.548078] pipe_off wait timed out
[92146.548167] Modules linked in: hid_generic usbhid hid snd_hda_codec_realtek snd_hda_intel snd_hda_codec parport_pc snd_hwdep ppdev snd_pcm_oss i915 snd_mixer_oss snd_pcm arc4 iwldvm snd_seq_dummy mac80211 snd_seq_oss snd_seq_midi fbcon tileblit font bitblit softcursor drm_kms_helper snd_rawmidi snd_seq_midi_event coretemp drm snd_seq kvm btusb bluetooth snd_timer iwlwifi pcmcia tpm_infineon i2c_algo_bit joydev snd_seq_device intel_agp cfg80211 snd intel_gtt yenta_socket pcmcia_rsrc sony_laptop agpgart microcode psmouse tpm_tis serio_raw mxm_wmi soundcore snd_page_alloc tpm acpi_cpufreq lpc_ich pcmcia_core tpm_bios mperf processor lp parport firewire_ohci firewire_core crc_itu_t sdhci_pci sdhci thermal e1000e
[92146.548173] Pid: 4304, comm: kworker/0:0 Tainted: G W 3.8.0-rc3-s0i3-v3-test+ #9
[92146.548175] Call Trace:
[92146.548189] [<c10378e2>] warn_slowpath_common+0x72/0xa0
[92146.548227] [<f86398b4>] ? intel_wait_for_pipe_off+0x184/0x190 [i915]
[92146.548263] [<f86398b4>] ? intel_wait_for_pipe_off+0x184/0x190 [i915]
[92146.548270] [<c10379b3>] warn_slowpath_fmt+0x33/0x40
[92146.548307] [<f86398b4>] intel_wait_for_pipe_off+0x184/0x190 [i915]
[92146.548344] [<f86399c2>] intel_disable_pipe+0x102/0x190 [i915]
[92146.548380] [<f8639ea4>] ? intel_disable_plane+0x64/0x80 [i915]
[92146.548417] [<f8639f7c>] i9xx_crtc_disable+0xbc/0x150 [i915]
[92146.548456] [<f863ebee>] intel_crtc_update_dpms+0x5e/0x90 [i915]
[92146.548493] [<f86437cf>] intel_modeset_setup_hw_state+0x42f/0x8f0 [i915]
[92146.548535] [<f8645b0b>] intel_lid_notify+0x9b/0xc0 [i915]
[92146.548543] [<c15610d3>] notifier_call_chain+0x43/0x60
[92146.548550] [<c105d1e1>] __blocking_notifier_call_chain+0x41/0x80
[92146.548556] [<c105d23f>] blocking_notifier_call_chain+0x1f/0x30
[92146.548563] [<c131a684>] acpi_lid_send_state+0x78/0xa4
[92146.548569] [<c131aa9e>] acpi_button_notify+0x3b/0xf1
[92146.548577] [<c12df56a>] ? acpi_os_execute+0x17/0x19
[92146.548582] [<c12e591a>] ? acpi_ec_sync_query+0xa5/0xbc
[92146.548589] [<c12e2b82>] acpi_device_notify+0x16/0x18
[92146.548595] [<c12f4904>] acpi_ev_notify_dispatch+0x38/0x4f
[92146.548600] [<c12df0e8>] acpi_os_execute_deferred+0x20/0x2b
[92146.548607] [<c1051208>] process_one_work+0x128/0x3f0
[92146.548613] [<c1564f73>] ? common_interrupt+0x33/0x38
[92146.548618] [<c104f8c0>] ? wake_up_worker+0x30/0x30
[92146.548624] [<c12df0c8>] ? acpi_os_wait_events_complete+0x1e/0x1e
[92146.548629] [<c10524f9>] worker_thread+0x119/0x3b0
[92146.548634] [<c10523e0>] ? manage_workers+0x240/0x240
[92146.548640] [<c1056e84>] kthread+0x94/0xa0
[92146.548647] [<c1060000>] ? ftrace_raw_output_sched_stat_runtime+0x70/0xf0
[92146.548652] [<c15649b7>] ret_from_kernel_thread+0x1b/0x28
[92146.548658] [<c1056df0>] ? kthread_create_on_node+0xc0/0xc0
three different modeset flags are introduced in this patch
MODESET_ON_LID_OPEN: do modeset on next lid open event
MODESET_DONE: modeset already done
MODESET_SUSPENDED: suspended, only do modeset when system is resumed
In this way,
1. when lid is closed, MODESET_ON_LID_OPEN is set so that
we'll do modeset on next lid open event.
2. when lid is opened, MODESET_DONE is set
so that duplicate lid open events will be ignored.
3. when system suspends, MODESET_SUSPENDED is set.
In this case, we will not do modeset on any lid events.
Plus, locking mechanism is also introduced to avoid racing.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The RC6 VIDS has a linear ramp starting at 250mv, which means any values
below 250 are invalid. The old buggy macros tried to adjust for this to
be more flexible, but there is no need. As Dan pointed out the ENCODE
only ever has one value. The only invalid value for decode is an input
of 0 which means something is really wonky, and the cases where DECODE
are used either don't matter (debug values), or would be implicitly
correct (the check for less than 450).
This patch makes simpler, easier to read macros which are actually
correct. Maybe this patch can actually fix some bugs now.
Thanks to Dan for catching this. /me hides
Cc: stable@kernel.org
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Otherwise the system will burn even brighter and worse, leave the user
wondering what's going on exactly.
Since we already have a panic handler which will (try) to restore the
entire fbdev console mode, we can just bail out. Inspired by a patch
from Konstantin Khlebnikov. The callchain leading to this, cut&pasted
from Konstantin's original patch:
callstack:
panic()
bust_spinlocks(1)
unblank_screen()
vc->vc_sw->con_blank()
fbcon_blank()
fb_blank()
info->fbops->fb_blank()
drm_fb_helper_blank()
drm_fb_helper_dpms()
drm_modeset_lock_all()
mutex_lock(&dev->mode_config.mutex)
Note that the entire locking in the fb helper around panic/sysrq and
kdbg is ... non-existant. So we have a decent change of blowing up
everything. But since reworking this ties in with funny concepts like
the fbdev notifier chain or the impressive things which happen around
console_lock while oopsing, I'll leave that as an exercise for braver
souls than me.
v2: Drop the -EBUSY return value I've copied, we don't need it since
the we'll take care of things ourselves anyway.
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
References: https://patchwork.kernel.org/patch/1878181/
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that the fbdev helper interface for drivers is trimmed down,
update the kerneldoc for all the remaining exported functions.
I've tried to beat the DocBook a bit by reordering the function
references a bit into a more sensible ordering. But that didn't work
out at all. Hence just extend the in-code DOC: section a bit.
Also remove the LOCKING: sections - especially for the setup functions
they're totally bogus. But that's not a documentation problem, but
simply an artifact of the current rather hazardous locking around drm
init and even more so around fbdev setup ...
v2: Some further improvements:
- Also add documentation for drm_fb_helper_single_add_all_connectors,
Dave Airlie didn't want me to kill this one from the fb helper
interface.
- Update docs for drm_fb_helper_fill_var/fix - they should be used
from the driver's ->fb_probe callback to setup the fbdev info
structure.
- Clarify what the ->fb_probe callback should all do - it needs to
setup both the fbdev info and allocate the drm framebuffer used as
backing storage.
- Add basic documentaation for the drm_fb_helper_funcs driver callback
vfunc.
v3: Implement clarifications Laurent Pinchart suggested in his review.
v4: Fix another mispelling Laurent spotted.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The fb helper lost its support for reallocating an fb completely, so
no need to return special success values any more.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
No need to check whether we've allocated a new fb since we're not
always doing that. Also, we always need to register the fbdev and add
it to the panic notifier.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The idea behind calling down into the driver's ->fb_probe function on each
hotplug seems to be able to reallocate the backing storage (if e.g. a screen
with higher resolution gets added). But that requires quite a bit of work in the
fb helper itself, since currently we limit new screens to the currently
allocated fb. An no kms driver supports fbdev fb resizing.
So don't bother and start to simplify the code by calling drm_fb_helper_set_par
directly from the fbdev hotplug function, since that's the only thing left in
drm_fb_helper_single_fb_probe which does not concern itself with fb allocation
and initial setup. Follow-on patches will streamline the initial setup
code.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
While doing the modeset rework for drm/i915 I've noticed that the fb
helper is very liberal with the semantics of the ->set_config
interface:
- It doesn't bother clearing stale modes (e.g. when unplugging a
screen).
- It unconditionally sets the fb, even if no mode will be set on a
given crtc.
- The initial setup is a bit fun since we need to pick crtcs to decide
the desired fb size, but also should set the modeset->fb pointer.
Explain what's going on in the fixup code after the fb is allocated.
The crtc helper didn't really care, but the new i915 modeset
infrastructure did, so I've had to add a bunch of special-cases to
catch this.
Fix this all up and enforce the interface by converting the checks in
drm/i915/intel_display.c to BUG_ONs.
v2: Fix commit message spell fail spotted by Rob Clark.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that the driver is in control of whether it needs to disable
everything at take-over or not, we can rip this all out.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This should be done in the drivers for two reasons:
- it gets in the way of fastboot efforts
- it links the fb helpers with the crtc helpers instead of going
through the real interface vfuncs, forcing i915 to fake all the
->disable callbacks used by the crtc helper to avoid ugly Oopsen
v2: Resolve conflicts since drivers still call
drm_fb_helper_single_add_all_connectors.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm_fbdev_cma_init does the inital fbcon setup by calling down into
drm_fb_helper_initial_config, so no need at all to restore the just
set up configuration right away ...
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Not called by anyone, and really, shouldn't be. Drivers are supposed
either drm_fb_helper_initial_config or drm_fb_helper_hotplug_event.
Originally this was done differently, but is now consolidated in the
helper functions and no longer done by drivers directly.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It doesn't even show up in any header files and only used iternally.
Originally it was (ab)used to restore the fbcon on lastclose, but that
died with
commit e8e7a2b8cc
Author: Dave Airlie <airlied@redhat.com>
Date: Thu Apr 21 22:18:32 2011 +0100
drm/i915: restore only the mode of this driver on lastclose (v2)
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It's only used internally for the sysrq and panic handlers provided by
the drm fb helper implementation. Hence just inline it, kill the
export and remove the confusing kerneldoc. Driver's are supposed to
call drm_fb_helper_restore_fbdev_mode on lastclose.
Note that locking is totally fubar - the sysrq case doesn't take any
locks at all. The panic handler probably shouldn't take any locks
since it'll only make things worse. Otoh it's probably better to
switch things over to the atomic modeset callbacks (and disable the
panic handler for those drivers which don't implement it).
But that's both better done in separate patches.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
... it's required. Fix up exynos and the cma helper, and add a
corresponding WARN_ON to drm_fb_helper_restore_fbdev_mode.
Note that tegra calls the fbdev cma helper restore function also from
it's driver-load callback. Which is a bit against current practice,
since usually the call is only from ->lastclose, and initial setup is
done by drm_fb_helper_initial_config.
Also add the relevant drm DocBook entry.
v2: Add promised WARN to restore_fbdev_mode.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This reverts commit 6f33814bd4.
The quirk cause a regression, and it looks like the original bug was
simply a lack of FIFO bandwidth on the i915G of the reporter. Which
should eventually be fixed as soon as we get around to implemented
DSPARB FIFO reassignment on gen 3.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52281
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
TTM reservations changes, preparing for new reservation mutex system.
* 'for-airlied' of git://people.freedesktop.org/~mlankhorst/linux:
drm/ttm: unexport ttm_bo_wait_unreserved
drm/nouveau: use ttm_bo_reserve_slowpath in validate_init, v2
drm/ttm: use ttm_bo_reserve_slowpath_nolru in ttm_eu_reserve_buffers, v2
drm/ttm: add ttm_bo_reserve_slowpath
drm/ttm: cleanup ttm_eu_reserve_buffers handling
drm/ttm: remove lru_lock around ttm_bo_reserve
drm/nouveau: increase reservation sequence every retry
drm/vmwgfx: always use ttm_bo_is_reserved
