The first UART controller in the "Everything-Else" power domain is
called uart_A. Unlike all other UARTs (which use a 64 byte fifo-size in
hardware) uart_A has a fifo-size of 128 bytes. This UART controller is
typically used for Bluetooth HCI.
The fifo-size of 128 bytes is valid from all SoCs from Meson6 (or
possibly even earlier) all the way up to the latest 64-bit ones.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210604170844.2201229-1-martin.blumenstingl@googlemail.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmDGe+4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG/IUH/iyHVulAtAhL9bnR
qL4M1kWfcG1sKS2TzGRZzo6YiUABf89vFP90r4sKxG3AKrb8YkTwmJr8B/sWwcsv
PpKkXXTobbDfpSrsXGEapBkQOE7h2w739XeXyBLRPkoCR4UrEFn68TV2rLjMLBPS
/EIZkonXLWzzWalgKDP4wSJ7GaQxi3LMx3dGAvbFArEGZ1mPHNlgWy2VokFY/yBf
qh1EZ5rugysc78JCpTqfTf3fUPK2idQW5gtHSMbyESrWwJ/3XXL9o1ET3JWURYf1
b0FgVztzddwgULoIGWLxDH5WWts3l54sjBLj0yrLUlnGKA5FjrZb12g9PdhdywuY
/8KfjeE=
=JfJm
-----END PGP SIGNATURE-----
Merge tag 'v5.13-rc6' into usb-next
We want the usb fixes in here as well, and this resolves some merge
issues with:
drivers/usb/dwc3/debugfs.c
drivers/usb/dwc3/gadget.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmDGe+4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG/IUH/iyHVulAtAhL9bnR
qL4M1kWfcG1sKS2TzGRZzo6YiUABf89vFP90r4sKxG3AKrb8YkTwmJr8B/sWwcsv
PpKkXXTobbDfpSrsXGEapBkQOE7h2w739XeXyBLRPkoCR4UrEFn68TV2rLjMLBPS
/EIZkonXLWzzWalgKDP4wSJ7GaQxi3LMx3dGAvbFArEGZ1mPHNlgWy2VokFY/yBf
qh1EZ5rugysc78JCpTqfTf3fUPK2idQW5gtHSMbyESrWwJ/3XXL9o1ET3JWURYf1
b0FgVztzddwgULoIGWLxDH5WWts3l54sjBLj0yrLUlnGKA5FjrZb12g9PdhdywuY
/8KfjeE=
=JfJm
-----END PGP SIGNATURE-----
Merge tag 'v5.13-rc6' into tty-next
We want the tty fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All users of arm_pm_restart() have been converted to use the kernel
restart handler.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
By making use of the kernel restart handler, board specific restart
handlers can be prioritized amongst available mechanisms for a particular
board or system.
Select the default priority of 128 to indicate that the restart callback
in the machine description is the default restart mechanism.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Register with kernel restart handler instead of setting arm_pm_restart
directly.
Select a high priority of 192 to ensure that default restart handlers
are replaced if Xen is running.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
This reverts commit e220ba6022.
The VERIFY_PERMISSION_FAULT is introduced since 2009 but no
one use it, just revert it and clean unused comment.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Using our knowledge of where the physical kernel sections start
and end we can split mapping of lowmem and kernel apart.
This is helpful when you want to place the kernel independently
from lowmem and not be limited to putting it into lowmem only,
but also into places such as the VMALLOC area.
We extensively rewrite the lowmem mapping code to account for
all cases where the kernel image overlaps with the lowmem in
different ways. This is helpful to handle situations which
occur when the kernel is loaded in different places and makes
it possible to place the kernel in a more random manner
which is done with e.g. KASLR.
We sprinkle some comments with illustrations and pr_debug()
over it so it is also very evident to readers what is happening.
We now use the kernel_sec_start and kernel_sec_end instead
of relying on __pa() (phys_to_virt) to provide this. This
is helpful if we want to resolve physical-to-virtual and
virtual-to-physical mappings at runtime rather than
compiletime, especially if we are not using patch phys to
virt.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
When we are mapping the initial sections in head.S we
know very well where the start and end of the kernel image
in physical memory is placed. Later on it gets hard
to determine this.
Save the information into two variables named
kernel_sec_start and kernel_sec_end for convenience
for later work involving the physical start and end
of the kernel. These variables are section-aligned
corresponding to the early section mappings set up
in head.S.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
We want to be able to compile the kernel into an address different
from PAGE_OFFSET (start of lowmem) + TEXT_OFFSET, so start to pry
apart the address of where the kernel is located from the address
where the lowmem is located by defining and using KERNEL_OFFSET in
a few key places.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Add the power controller node and the correspondending qos nodes for
RK322x.
Also add the power-domain property to the nodes that are already
present.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20210527154455.358869-10-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the power controller node and the correspondending qos nodes for
RK3036.
Also add the power-domain property to the nodes that are already
present.
Note: Since the regiser offsets of the axi interconnect QoS are missing
in the TRM (RK3036 TRM V1.0), they have been taken from vendor kernel.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20210527154455.358869-9-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
While the kernel doesn't care so much right now, boot loaders like
u-boot need to refine the node on their side, so to make life easier
for everyone add the labels to the timer nodes on rk3066a.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210612184733.2331-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The SL3516 SoC has a crypto offloader IP.
This patch adds it on the gemini SoC Device-tree.
Link: https://lore.kernel.org/r/20210611220501.684997-1-linus.walleij@linaro.org
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
mainly:
- I2S Support for the V3
- Audio Codec Support for the V3s
- DMA support for the V3s
- PWM support for the V3s
- Support for Bluetooth Audio on the pinephone
- Add A10-like timers to the A64 and R40
- New boards: Forlinx OKA40i-C, Forlinx OKA40i-C, NanoPi R1S H5
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYMN5hwAKCRDj7w1vZxhR
xa2sAP0Y4UY9ncxWmuTUMgi4osqscowxGUsCHdfxP+Yk9/IJ8wEAqKA5tfior25d
guy+cgXft/CixRtgv6Go3W55tJpZ6wQ=
=A9Cb
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-5.14-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Our usual bunch of patches to improve the Allwinner SoCs support,
mainly:
- I2S Support for the V3
- Audio Codec Support for the V3s
- DMA support for the V3s
- PWM support for the V3s
- Support for Bluetooth Audio on the pinephone
- Add A10-like timers to the A64 and R40
- New boards: Forlinx OKA40i-C, Forlinx OKA40i-C, NanoPi R1S H5
* tag 'sunxi-dt-for-5.14-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (29 commits)
ARM: dts: sun8i: v3s: enable emac for zero Dock
arm64: dts: allwinner: pinephone: Set audio card name
ARM: dts: sun8i: r40: Add timer node
ARM: dts: sun8i: V3: add I2S interface to V3 dts
dt-bindings: sound: sun4i-i2s: add Allwinner V3 I2S compatible
ARM: dts: sun8i: V3: add codec analog frontend to V3 dts
ASoC: dt-bindings: sun8i-a23-codec-analog: add compatible for Allwinner V3
ARM: dts: sun8i: v3s: add analog codec and frontend to v3s dts
ARM: dts: sun8i: v3s: add DMA properties to peripherals supporting DMA
ARM: dts: sun8i: v3s: add DMA controller to v3s dts
ARM: dts: sun8i: v3s: add pwm controller to v3s dts
dt-bindings: pwm: allwinner: add v3s pwm compatible
arm64: dts: allwinner: h5: Add NanoPi R1S H5 support
dt-bindings: arm: Add NanoPi R1S H5
arm64: dts: allwinner: pinephone: Add support for Bluetooth audio
arm64: dts: allwinner: a64: Allow multiple DAI links
arm64: dts: allwinner: a64: Add pinmux nodes for AIF2/AIF3
arm64: dts: allwinner: a64: Allow using multiple codec DAIs
ARM: dts: sun8i-a33: Allow using multiple codec DAIs
ASoC: dt-bindings: sun8i-codec: Increase #sound-dai-cells
...
Link: https://lore.kernel.org/r/96cc77ec-139d-4685-8a66-a60964cf39fd.lettre@localhost
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add the use of tickless and HR times to ARM9 defconfig
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ5TRCVIBiyi/S+BG4fOrpwrNPNDAUCYMNdFwAKCRAfOrpwrNPN
DAAVAQD7rFjVG40z+r1Xil7a8Han/1t+xoSf+NDgrNGYCHswUwD/Z7YyRnsGwuR8
DR64Sw6XjT5sIh9Q24Txda1C/NnQ2Qk=
=OMYy
-----END PGP SIGNATURE-----
Merge tag 'at91-defconfig-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfig
AT91 defconfig for 5.14:
- Add the use of tickless and HR times to ARM9 defconfig
* tag 'at91-defconfig-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: configs: at91_dt_defconfig: configs for sam9x60
Link: https://lore.kernel.org/r/20210611125659.25590-1-nicolas.ferre@microchip.com
Signed-off-by: Olof Johansson <olof@lixom.net>
- A fix for sama5d4 gpio mux
- A trivial fix for DT documentation
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ5TRCVIBiyi/S+BG4fOrpwrNPNDAUCYMNX7gAKCRAfOrpwrNPN
DJa1AQCeS3dhkLRYeDZ56/QLM5fEOc8Udqml4JS2iGX16wJ9hQD9FdBKiXbRUvUV
mq2JQ0C1smb6Ro5KPpHqlpJTtIfxNAE=
=HggT
-----END PGP SIGNATURE-----
Merge tag 'at91-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 dt for 5.14:
- A fix for sama5d4 gpio mux
- A trivial fix for DT documentation
* tag 'at91-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
dt-bindings: i2c: at91: fix example for scl-gpios
ARM: dts: at91: sama5d4: fix pinctrl muxing
Link: https://lore.kernel.org/r/20210611123446.20510-1-nicolas.ferre@microchip.com
Signed-off-by: Olof Johansson <olof@lixom.net>
- Fix interrupt cells, GPIO controller node names in accordance
with new YAML schemas.
- Add proper compatible strings for Broadcomm Wifi and BT.
- Fix upp and add some mount matrices for accelerometers so
e.g. UI:s work as they should.
- Drop the DRDY pin assignment for a non-existing pin on a
magnetometer.
-----BEGIN PGP SIGNATURE-----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=Yyrj
-----END PGP SIGNATURE-----
Merge tag 'ux500-dts-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt
Some Ux500 DTS updates for v5.14:
- Fix interrupt cells, GPIO controller node names in accordance
with new YAML schemas.
- Add proper compatible strings for Broadcomm Wifi and BT.
- Fix upp and add some mount matrices for accelerometers so
e.g. UI:s work as they should.
- Drop the DRDY pin assignment for a non-existing pin on a
magnetometer.
* tag 'ux500-dts-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: ux500: Fix orientation of Janice accelerometer
ARM: dts: href: Mount matrices for TVK R2
ARM: dts: ux500: Fix some compatible strings
ARM: dts: ux500: Drop drdy pin assignment from magnetometer
ARM: dts: ux500: Fix orientation of accelerometer
ARM: dts: ux500: Rename gpio-controller node
ARM: dts: ux500: Fix interrupt cells
Link: https://lore.kernel.org/r/CACRpkdYh9kZJU6PAxghPRGBco_61wRZgUnTZr_3qvySPCo5rBw@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
for 5.14, please pull the following:
- Rafal updates the BCM5301x, HR2, BCM63xx, BCM5301x, NSP and Cygnus DTS
files to resolve a number of DT binding check warnings pertaining to
NAND, pinmux, clocks, SPI
- Stefan provides a fix for an increase in the DWC2 controller's RX FIFO
causing regressions on the Raspberry Pi 4B
- Mateusz adds a BCM2711 specific VEC compatible string to allow keying
off that variant properly
- Stefan adds support for the Raspberry Pi 400 by doing some DTS/DTSI
re-organization work and finally adding the DTS file proper
-----BEGIN PGP SIGNATURE-----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=ZmMv
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.14/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.14, please pull the following:
- Rafal updates the BCM5301x, HR2, BCM63xx, BCM5301x, NSP and Cygnus DTS
files to resolve a number of DT binding check warnings pertaining to
NAND, pinmux, clocks, SPI
- Stefan provides a fix for an increase in the DWC2 controller's RX FIFO
causing regressions on the Raspberry Pi 4B
- Mateusz adds a BCM2711 specific VEC compatible string to allow keying
off that variant properly
- Stefan adds support for the Raspberry Pi 400 by doing some DTS/DTSI
re-organization work and finally adding the DTS file proper
* tag 'arm-soc/for-5.14/devicetree' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: Add reference to RPi 400
ARM: dts: Add Raspberry Pi 400 support
ARM: dts: bcm283x: Fix up GPIO LED node names
dt-bindings: arm: bcm2835: Add Raspberry Pi 400 to DT schema
ARM: dts: Move BCM2711 RPi specific into separate dtsi
ARM: dts: bcm283x: Fix up MMC node names
ARM: boot: dts: bcm2711: Add BCM2711 VEC compatible
Revert "ARM: dts: bcm283x: increase dwc2's RX FIFO size"
ARM: dts: BCM5301X: Fixup SPI binding
dt-bindings: clock: brcm, iproc-clocks: convert to the json-schema
ARM: dts: BCM5301X: Fix pinmux subnodes names
ARM: dts: Hurricane 2: Fix NAND nodes names
ARM: dts: BCM63xx: Fix NAND nodes names
ARM: NSP: dts: fix NAND nodes names
ARM: Cygnus: dts: fix NAND nodes names
ARM: brcmstb: dts: fix NAND nodes names
ARM: dts: BCM5301X: Fix NAND nodes names
Link: https://lore.kernel.org/r/20210610194836.309869-1-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Highlights:
-----------
MCU part:
- Fixes for Yaml verifications
MPU part:
- Configure qspi's mdma transfer to block for stm32mp151
- ST boards:
- Fixes for yaml verifications
- DH boards:
- Fixes for yaml verifications
- Rework of LAN8710i on DHCOM SoM to fit with requested reset sequence.
- Odyssey boards:
- fix Sd card detectection (gpio line updated)
- fix eMMC VQMMC suuply (use vdd instead of v3v3)
-----BEGIN PGP SIGNATURE-----
iQJRBAABCgA7FiEEctl9+nxzUSUqdELdf5rJavIecIUFAmDCMKAdHGFsZXhhbmRy
ZS50b3JndWVAZm9zcy5zdC5jb20ACgkQf5rJavIecIUdZA//XsO0pAZ3njAtMmUG
+nFc6a84dS1GJVpaaMVUlvlEe2AEeeqNbrUJem5b2AaxOPH8nS1/9iIvr55mJS38
kp6YP2oRAShwbtjcBZUVDKli9yYWVptvwgySPyYDA55TnbgTwVd8uTtJ2B4UqSME
2AWaUjsUWsooJN/+p558w+FNBbSNTcDJg3CdKYNUt07wFRSPARI4Kx7EDzqsbGSS
452RSTN5lUVJslpJUzu7FEEzUGIX4TmYz2aXwlx2BKPUWfAk5iCZGTb6hk7yNZDK
fJHFxTyz+7LJ+L1jKxYLEyrYIx7UpXQIqePKRGSUOC5W7DRc7zBr+aMtpEVkIAlN
dIWbGZaaAJMysCHz/7IQO6SO3P61OPSjAPLkXNp4xN7YJ/t39i3h67GRAy1CdWz/
qJ7lhlfWJAKsXEwI0jIxIy/w7EV0WgqGD+BGGN7UcxwfBDF/mDPuWvv5WgKO9cQW
mCbXn0Ifs0tI0pyWX60o1B/GigXaR/aYBdFvuel4T69NgIZZwlKQiAzvBPv5KE43
vRh2ZoShILPyezpuvkyqtfEYzdv5iPoEyH4YcpqmK7NcCchqBUSfTGTBT/8BFG6d
zzm5mBDOQiNnayFClAZ+pf1z1IVpfV9q5FAKLicWL6mEjWX9Wm3NnexDloJgZTb3
y+q2pEKpBnzc2kXwTc2jIyZdcO0=
=RUQs
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT updates for v5.14, round 1
Highlights:
-----------
MCU part:
- Fixes for Yaml verifications
MPU part:
- Configure qspi's mdma transfer to block for stm32mp151
- ST boards:
- Fixes for yaml verifications
- DH boards:
- Fixes for yaml verifications
- Rework of LAN8710i on DHCOM SoM to fit with requested reset sequence.
- Odyssey boards:
- fix Sd card detectection (gpio line updated)
- fix eMMC VQMMC suuply (use vdd instead of v3v3)
* tag 'stm32-dt-for-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: fix stpmic node for stm32mp1 boards
ARM: dts: stm32: Rename spi-flash/mx66l51235l@N to flash@N on DHCOM SoM
ARM: dts: stm32: Rename eth@N to ethernet@N on DHCOM SoM
ARM: dts: stm32: Drop unused linux,wakeup from touchscreen node on DHCOM SoM
ARM: dts: stm32: fix the Odyssey SoM eMMC VQMMC supply
ARM: dts: stm32: add a new DCMI pins group on stm32mp15
ARM: dts: stm32: fix ltdc pinctrl on microdev2.0-of7
dt-bindings: net: document ptp_ref clk in dwmac
ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15
ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings
ARM: dts: stm32: update pinctrl node name on STM32 MCU to prevent warnings
ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings
ARM: dts: stm32: fix RCC node name on stm32f429 MCU
ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards
ARM: dts: stm32: fix stm32mp157c-odyssey card detect pin
ARM: dts: stm32: Configure qspi's mdma transfer to block for stm32mp151
ARM: dts: stm32: Fix touchscreen node on dhcom-pdk2
ARM: dts: stm32: Remove extra size-cells on dhcom-pdk2
ARM: dts: stm32: Rework LAN8710Ai PHY reset on DHCOM SoM
Link: https://lore.kernel.org/r/e4bfb255-63fb-74a8-d591-eb09821c93ee@foss.st.com
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Fix: add missing of_node_put.
2. Extend Samsung maintainers entry to cover Samsung PWM driver files,
because they do not have a dedicated entry.
3. Minor cleanups.
-----BEGIN PGP SIGNATURE-----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=PXfC
-----END PGP SIGNATURE-----
Merge tag 'samsung-soc-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc
Samsung mach/soc changes for v5.14
1. Fix: add missing of_node_put.
2. Extend Samsung maintainers entry to cover Samsung PWM driver files,
because they do not have a dedicated entry.
3. Minor cleanups.
* tag 'samsung-soc-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
MAINTAINERS: Include Samsung PWM in Samsung SoC entry
soc: samsung: pmu: drop EXYNOS_CENTRAL_SEQ_OPTION defines
ARM: exynos: add missing of_node_put for loop iteration
ARM: s3c: Remove unnecessary break in RX1950
Link: https://lore.kernel.org/r/20210610074055.12474-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Several cleanups and alignment with dtschema. This includes removal
of unused properties and fixing LED brightness property.
2. Enable PMIC RTC interrupt as a wakeup source (intended to wakeup for
example from Suspend to RAM where the PMIC RTC's power is still
supplied).
3. Disable unused/not implemented camera on GT-I9100.
-----BEGIN PGP SIGNATURE-----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=8yS0
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.14
1. Several cleanups and alignment with dtschema. This includes removal
of unused properties and fixing LED brightness property.
2. Enable PMIC RTC interrupt as a wakeup source (intended to wakeup for
example from Suspend to RAM where the PMIC RTC's power is still
supplied).
3. Disable unused/not implemented camera on GT-I9100.
* tag 'samsung-dt-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Disable unused camera input for I9100
ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid XU3/XU4 family
ARM: dts: exynos: enable PMIC wakeup from suspend on SMDK5420
ARM: dts: exynos: enable PMIC wakeup from suspend on Arndale Octa
ARM: dts: exynos: enable PMIC wakeup from suspend on P4 Note
ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid X/U3
ARM: dts: exynos: enable PMIC wakeup from suspend on Midas
ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid XU
ARM: dts: exynos: enable PMIC wakeup from suspend on Arndale
ARM: dts: exynos: enable PMIC wakeup from suspend on Origen4412
ARM: dts: exynos: enable PMIC wakeup from suspend on Itop Core
ARM: dts: s5pv210: remove unused Atmel touchscreen properties in Goni
ARM: dts: exynos: fix PWM LED max brightness on Odroid XU4
ARM: dts: exynos: fix PWM LED max brightness on Odroid HC1
ARM: dts: exynos: fix PWM LED max brightness on Odroid XU/XU3
ARM: dts: exynos: replace legacy MMS114 touchscreen x/y properties in GT-N7100
ARM: dts: exynos: align Broadcom WiFi with dtschema
Link: https://lore.kernel.org/r/20210610074055.12474-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Olof Johansson <olof@lixom.net>
- IBM Rainier and Everest LED descriptions. These systems have a large
number of LEDs attached via expanders.
- Ampere Mt Jade updates, as OpenBMC bringup continues for this
machine.
- Updated 64MB flash layout for systems using OpenBMC on NOR root file
systems.
- Support for HS200 MMC on AST2600 EVB. This is only supported from A2,
so a new device tree is added to support A0 and A1.
- Update all command lines for early serial output.
-----BEGIN PGP SIGNATURE-----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=UxVn
-----END PGP SIGNATURE-----
Merge tag 'aspeed-5.14-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt
ASPEED device tree updates for 5.14
- IBM Rainier and Everest LED descriptions. These systems have a large
number of LEDs attached via expanders.
- Ampere Mt Jade updates, as OpenBMC bringup continues for this
machine.
- Updated 64MB flash layout for systems using OpenBMC on NOR root file
systems.
- Support for HS200 MMC on AST2600 EVB. This is only supported from A2,
so a new device tree is added to support A0 and A1.
- Update all command lines for early serial output.
* tag 'aspeed-5.14-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: aspeed: everest: Add pcie cable card indicator leds
ARM: dts: aspeed: everest: Add vrm and other indicator leds
ARM: dts: aspeed: everest: Add dimm indicator leds
ARM: dts: aspeed: everest: Add pcie slot indicator leds
ARM: dts: aspeed: everest: Add nvme and fan indicator leds
ARM: dts: aspeed: everest: Add system level indicator leds
ARM: dts: aspeed-g5: Add SCU phandle to GFX node
ARM: dts: aspeed: Everest: Add directly controlled LEDs
ARM: dts: aspeed: Rainier 4U: Remove fan updates
ARM: dts: aspeed: Everest: Fix cable card PCA chips
ARM: dts: aspeed: Grow u-boot partition 64MiB OpenBMC flash layout
ARM: dts: aspeed: mtjade: switch to 64MB flash layout
ARM: dts: aspeed: mtjade: Add PSU support
ARM: dts: aspeed: mtjade: Enable OCP card support via NC-SI
ARM: dts: aspeed: Set earlycon boot argument
ARM: dts: aspeed-g6: Add pinctrl settings
ARM: dts: aspeed: ast2600evb: Add dts file for A1 and A0
ARM: dts: aspeed: ast2600evb: Add phase correction for emmc controller.
ARM: dts: aspeed: ast2600evb: Add sdhci node and gpio regulator for A2 evb.
Link: https://lore.kernel.org/r/CACPK8XduV9F=piu1qh56g+YNOZOBYTW7b2Y=XVYafpYDwWmDYA@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Mostly just clean-up for device tree binding checks with
few other clean-up patches:
- Drop ov5640 sensor for dra76-evm, it's just one of the
optional additional sensors and makes hard to use any of
the other options, TI is using the devicetree overlay
snippets for these
- Group the phandles in osd3358-sm-red to make the files
more readable
- A series of gpio clean-up patches to follow the binding
documentation
- Move ti,no-reset related properties to the target module
level, the ti-sysc driver handles them also in the child
but they really belong to the target module
- Drop the unnecessary uart compatible entries to make the
binding check to work
- Mailbox related updates to make the binding check to
work
-----BEGIN PGP SIGNATURE-----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=5lho
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.14/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Devicetree changes for omaps for v5.14 merge window
Mostly just clean-up for device tree binding checks with
few other clean-up patches:
- Drop ov5640 sensor for dra76-evm, it's just one of the
optional additional sensors and makes hard to use any of
the other options, TI is using the devicetree overlay
snippets for these
- Group the phandles in osd3358-sm-red to make the files
more readable
- A series of gpio clean-up patches to follow the binding
documentation
- Move ti,no-reset related properties to the target module
level, the ti-sysc driver handles them also in the child
but they really belong to the target module
- Drop the unnecessary uart compatible entries to make the
binding check to work
- Mailbox related updates to make the binding check to
work
* tag 'omap-for-v5.14/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: OMAP2+: Replace underscores in sub-mailbox node names
ARM: dts: AM33xx/AM43xx: Rename wkup_m3 sub-mailbox node
ARM: dts: OMAP2/OMAP3: Rename processor sub-mailbox nodes
ARM: dts: OMAP2420: Drop interrupt-names from mailbox node
ARM: dts: am437x-l4: Drop ti,omap2-uart entry from UART nodes
ARM: dts: dra7-l4: Drop ti,omap4-uart entry from UART nodes
ARM: dts: am335x: fix ti,no-reset-on-init flag for gpios
ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpios
ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios
ARM: dts: dra7x-evm: Align GPIO hog names with dt-schema
ARM: dts: omap5-board-common: align gpio hog names with dt-schema
ARM: dts: omap3: align gpio hog names with dt-schema
ARM: dts: am437x: align gpio hog names with dt-schema
ARM: dts: am335x: align GPIO hog names with dt-schema
ARM: dts: osd3358-sm-red: group in the same phandle all its properties
ARM: dts: dra76-evm: remove ov5640
Link: https://lore.kernel.org/r/pull-1622618286-677305@atomide.com-3
Signed-off-by: Olof Johansson <olof@lixom.net>
Defconfig changes for omap2plus_defconfig to add WL1251
and LP5523 as loadable modules for n900.
-----BEGIN PGP SIGNATURE-----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=bKhk
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.14/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/defconfig
Defconfig changes for omaps for v5.14 merge window
Defconfig changes for omap2plus_defconfig to add WL1251
and LP5523 as loadable modules for n900.
* tag 'omap-for-v5.14/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Add LP5523 LED driver
ARM: omap2plus_defconfig: Add WL1251 and WEXT modules
Link: https://lore.kernel.org/r/pull-1622618286-677305@atomide.com-2
Signed-off-by: Olof Johansson <olof@lixom.net>
With the recent changes to drop legacy platform data for
am3/4, omap4/5, and dra7, we can drop the related unused
code. There is also a patch to remove leading spaces from
the Kconfig file.
-----BEGIN PGP SIGNATURE-----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=8/VK
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.14/cleanup-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc
Clean up changes for omaps for v5.14 merge window
With the recent changes to drop legacy platform data for
am3/4, omap4/5, and dra7, we can drop the related unused
code. There is also a patch to remove leading spaces from
the Kconfig file.
* tag 'omap-for-v5.14/cleanup-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: remove omap2_set_globals_control()
ARM: OMAP2+: CM: remove omap2_set_globals_cm()
ARM: OMAP1: Remove leading spaces in Kconfig
MAINTAINERS: remove obsolete OMAP HWMOD DATA FOR OMAP4-BASED DEVICES
Link: https://lore.kernel.org/r/pull-1622618286-677305@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
- GPIO extender support for the Falcon development board,
- Switches support for the ALT development board,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYLCiTgAKCRCKwlD9ZEnx
cNB6AP40CBtMLlW/h/DGCvm3iW8bRwHrBiuXeYrcHeJh1DoXFQEA3foLN4s5FZIQ
ZXFFOAgGVMHQft1o0qL0nO0ytw7zhg8=
=YIvB
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-dt-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.14
- GPIO extender support for the Falcon development board,
- Switches support for the ALT development board,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: dts: alt: Add SW2 as GPIO keys
ARM: dts: renesas: Move enable-method to CPU nodes
arm64: dts: renesas: beacon: Fix USB ref clock references
arm64: dts: renesas: beacon: Fix USB extal reference
ARM: dts: rcar-gen1: Correct internal delay for i2c[123]
arm64: dts: renesas: eagle: Add x1 clock
ARM: dts: koelsch: Rename sw2 to keyboard
ARM: dts: r8a7779, marzen: Fix DU clock names
arm64: dts: renesas: v3msk: Fix memory size
arm64: dts: renesas: condor: Switch eMMC bus to 1V8
arm64: dts: renesas: falcon-csi-dsi: Add GPIO extenders
arm64: dts: renesas: beacon kit: Setup AVB refclk
arm64: dts: renesas: Add fck to etheravb-rcar-gen3 clock-names list
ARM: dts: renesas: Add fck to etheravb-rcar-gen2 clock-names list
Link: https://lore.kernel.org/r/cover.1622188835.git.geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
- Refresh shmobile_defconfig for v5.13-rc1
- Enable R-Car USB2 clock selector support
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYLChcAAKCRCKwlD9ZEnx
cH0xAQDKjUogB7W9c/K9I5+zNyqAtWvf3aqfrlBV0wnOvPk4jgD/Siph1MbVJacv
VQFV8LS4Ip7+RKJ1cPexHvVIW5DAxwg=
=+ks9
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.14
- Refresh shmobile_defconfig for v5.13-rc1
- Enable R-Car USB2 clock selector support
* tag 'renesas-arm-defconfig-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable usb2_clksel for R-Car Gen3 and RZ/G2
ARM: shmobile: defconfig: Refresh for v5.13-rc1
Link: https://lore.kernel.org/r/cover.1622188834.git.geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
- MAINTAINERS fix for the DTS files
- Drop a duplicate ethernet node on the RUT1xx DTS
- Add device_type to the PCI node
- Fix up some DTS syntax so it agrees with the schemas merged
for the v5.14 merge window
-----BEGIN PGP SIGNATURE-----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=/Twf
-----END PGP SIGNATURE-----
Merge tag 'gemini-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt
Gemini device tree updates for the v5.14 kernel:
- MAINTAINERS fix for the DTS files
- Drop a duplicate ethernet node on the RUT1xx DTS
- Add device_type to the PCI node
- Fix up some DTS syntax so it agrees with the schemas merged
for the v5.14 merge window
* tag 'gemini-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: gemini: remove xxx-cells from display
ARM: dts: gemini-dlink-dir-685: Remove address from display port
ARM: dts: gemini-dlink-dir-685: rename gpio-i2c to i2c
ARM: dts: gemini-dlink-dns-313: rename gpio-i2c to i2c
ARM: dts: gemini: convert obsolete SPI properties
ARM: dts: gemini: use the right rtc compatible
ARM: dts: gemini: add device_type on pci
ARM: dts: gemini-rut1xx: remove duplicate ethernet node
ARM: dts: gemini: rename mdio to the right name
MAINTAINERS: gemini: add missing dts pattern
Link: https://lore.kernel.org/r/CACRpkdZWpLAcAStq8dEyGL_d9Bvp-WNPu-2EuJw1eTL4kyvgig@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add ethernet to the boards
- Add PCI hosts to the boards
- Create an expansion bus around the flash memory
- Add the beeper to NSLU2 completing the NSLU2 DTS
-----BEGIN PGP SIGNATURE-----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=W/eR
-----END PGP SIGNATURE-----
Merge tag 'ixp4xx-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt
IXP4xx DTS updates for the v5.14 kernel:
- Add ethernet to the boards
- Add PCI hosts to the boards
- Create an expansion bus around the flash memory
- Add the beeper to NSLU2 completing the NSLU2 DTS
* tag 'ixp4xx-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: Fix up the IXP4xx ethernet nodes
ARM: dts: ixp4xx: Add beeper to the NSLU2
ARM: dts: ixp4xx: Create a proper expansion bus
ARM: dts: ixp4xx: Add PCI hosts
ARM: dts: ixp4xx: Add ethernet
Link: https://lore.kernel.org/r/CACRpkdbmRjGW7vpr7hG+jiRTqNMZAyKZNhtvzj=SqhZmb1+F6A@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Select the ath10k sdio driver so that Wifi can work by default on
boards like imx6dl-pico-pi with a QCA9377 chip.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds device tree files for the General Electric Healthcare
(GEHC) B1x5v2 series. All models make use of Congatec's QMX6
system on module, which is described in its own device tree include,
so that it can also be used by other boards.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add VIO regulator that supplies multiple ethernet magnetics and
currently there is no upstream support for that in the networking,
so just keep the regulator enabled always to emulate what other
boards, which have this hard-wired, do. Until there is support.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The i2c bus can freeze at the end of transaction so the bus can no longer work.
This scenario is improved by adding scl/sda gpios definitions to implement the
i2c bus recovery mechanism.
Fixes: 52c7a088ba ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2")
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
To make the ethernet cable plugin detection reliable the
power detection of the smsc phy has been disabled.
Fixes: 52c7a088ba ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2")
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fix ethernet reset time properties as described in
Documentation/devicetree/bindings/net/ethernet-phy.yaml
Fixes: 52c7a088ba ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2")
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add SMP support for i.MX7D, including CPU hotplug support, for
systems where TFA is not present.
The motivation for bringing up the second i.MX7D core inside the kernel
is that legacy vendor bootloaders usually do not implement PSCI support.
This is a significant blocker for systems in the field that are running old
bootloader versions to upgrade to a modern mainline kernel version, as only
one CPU of the i.MX7D would be brought up.
Bring up the second i.MX7D core inside the kernel to make the migration
path to mainline kernel easier for the existing iMX7D users.
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Arulpandiyan Vadivel <arulpandiyan_vadivel@mentor.com> # Fix merge conflicts
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Marek Vasut <marex@denx.de> # heavy cleanup
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Dropping the machine_init specific of_platform_default_populate() can be
done safely due to the following two facts:
1)
Since commit 44a7185c2a ("of/platform: Add common method to populate
default bus") we have a common method to populate the devices.
2)
The machine_init code don't need bounded devices<>drivers since the code
uses syscon_regmap_lookup_by_compatible() which register a syscon
device on demand.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Commit f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB")
changed the Kconfig dependencies, so COFNIG_FB is no longer selected in
defconfigs. Restore support for it in exynos_defconfig, because most
Exynos platforms had graphical console running on framebuffer device
emulated on the Exynos DRM drivers.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20210611100204.6240-1-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
If the PM related modules are not loaded and PM firmware not configured,
the system suspend fails to resume. Let's fix this by adding initial
platform_suspend_ops to block suspend and warn about missing modules.
When pm33xx and wkup_m3_ipc have been loaded and m3 coprocessor booted
with it's firmware, pm33xx sets up working platform_suspend_ops. Note
that we need to configure at least PM_SUSPEND_STANDBY to have
suspend_set_ops().
Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
ti,pindir-d0-out-d1-in property is expected to be of type boolean.
Therefore, fix the property accordingly.
Fixes: b0b0395154 ("ARM: dts: am43x-epos-evm: set data pin directions for spi0 and spi1")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
ti,pindir-d0-out-d1-in property is expected to be of type boolean.
Therefore, fix the property accordingly.
Fixes: 444d66fafa ("ARM: dts: add spi wifi support to cm-t335")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The TI part is equivalent to the NXP part and its compatible value is
not documented in the DT bindings. All other users of similar I2C GPIO
expanders just use the compatible values of the original NXP parts.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Interrupts were never supported by ecap driver and the bindings
were never documented.Therefore drop the entries in preparation
to moving bindings to YAML schema.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
dtbs_check produces the following warning for ecap node name:
ecap@100: $nodename:0: 'ecap@100' does not match '^pwm(@.*|-[0-9a-f])*$'
Fix this by replacing ecap with pwm in node name
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
ti,am33xx-ecap is used to represent device nodes using ti,hwmod data.
Now that hwmod entries are entirely removed, drop usage of
ti,am33xx-ecap compatible from all DT nodes.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Commit 229110c1aa ("ARM: dts: am437x/am33xx/da850: Add new ECAP and
EPWM bindings") added ti,am3352-ehrpwm compatible which is similar to
ti,am33xx-ehrpwm but without out t,hwmod properties. But with commit
58bfbea5b1 ("ARM: dts: am437x/am33xx: Remove hwmod entries for ECAP
and EPWM nodes") dropped support for all ti,hwmod for ehrpwm, but
missed deprecating ti,am33xx-ehrpwm compatible. So drop ti,am33xx-ehrpwm
from DT as it is no longer needed.
ti-ehrpwn driver still support ti,am33xx-ehrpwm in order to maintain
backward compatibility.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
DMA was never supported by i2c-omap driver and the bindings were never
documented. Therefore drop the entries in preparation to moving
bindings to YAML schema.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
With [1] USB4 target-module node got defined in dra74x.dtsi file.
However, the earlier definition in [2] was not removed, and this
duplication of the target module is causing boot failure on dra74
variant boards - dra7-evm, dra76-evm.
USB4 is only present in DRA74x variants, so keeping the entry in
dra74x.dtsi and removing it from the top level interconnect hierarchy
dra7-l4.dtsi file. This change makes the USB4 target module no longer
visible to AM5718, DRA71x and DRA72x so removing references to it in
their respective dts files.
[1]: commit c7b72abca6 ("ARM: OMAP2+: Drop legacy platform data for
dra7 dwc3")
[2]: commit 549fce068a ("ARM: dts: dra7: Add l4 interconnect
hierarchy and ti-sysc data")
Fixes: c7b72abca6 ("ARM: OMAP2+: Drop legacy platform data for dra7 dwc3")
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
On some STM32 MP15 boards, stpmic node is not correct which generates
warnings running "make dtbs_check W=1" command. Issues are:
-"regulator-active-discharge" is not a boolean but an uint32.
-"regulator-over-current-protection" is not a valid entry for vref_ddr.
-LDO4 has a fixed voltage (3v3) so min/max entries are not allowed.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Fix the following dtbs_check warning:
spi-flash@0: $nodename:0: 'spi-flash@0' does not match '^flash(@.*)?$'
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: kernel@dh-electronics.com
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Fix the following dtbs_check warning:
eth@1,0: $nodename:0: 'eth@1,0' does not match '^ethernet(@.*)?$'
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: kernel@dh-electronics.com
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Fix the following dtbs_check warning:
touchscreen@38: 'linux,wakeup' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: kernel@dh-electronics.com
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The Seeed SoM-STM32MP157C device tree had the eMMC’s (SDMMC2) VQMMC
supply set to v3v3 (buck4), the same as the VMMC supply. That was
incorrect, as on the SoM, the VQMMC supply is provided from vdd (buck3)
instead.
Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The Seeed Odyssey-STM32MP157C board has a 20-pin DVP camera output.
stm32mp15-pinctrl.dtsi contained one pin state definition for the DCMI
interface, dcmi-0, AKA phandle dcmi_pins_a. This definition was
incompatible with the pins used on the Odyssey board, where:
- there are 8 data pins instead of 12,
- DCMI_HSYNC is available at PA4 instead of PH8,
- DCMI_D0 is at PC6 instead of PH9,
- DCMI_D3 is at PE1 instead of PH12,
- DCMI_D4 is at PE11 instead of PH14,
- DCMI_D5 is at PD3 instead of PI4,
- DCMI_D6 is at PE13 instead of PB8,
- DCMI_D7 is at PB9 instead of PE6.
Add the DCMI pins used on the Odyssey board as a new DCMI pin state
definition, dcmi-1, AKA phandle dcmi_pins_b.
Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
It prevents the following warning:
pin-controller@50002000: 'ltdc' does not match any of the regexes:
'-[0-9]*$', '^gpio@[0-9a-f]*$', 'pinctrl-[0-9]+'
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
It fixes the following warning seen running "make dtbs_check W=1"
Warning (simple_bus_reg): /soc/stmmac-axi-config: missing or empty
reg/ranges property
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Update node name to avoid a DT schema validation issue seen with
"make dtbs_check W=1". It also cleans picntrl dtsi files for f429/f469 MCU.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Despite the name, handle_domain_irq() deals with non-irqdomain
handling for the sake of a handful of legacy ARM platforms.
Move such handling into ARM's handle_IRQ(), allowing for better
code generation for everyone else. This allows us get rid of
some complexity, and to rearrange the guards on the various helpers
in a more logical way.
Signed-off-by: Marc Zyngier <maz@kernel.org>
A test with rockchip-io-domain.yaml gives notifications
for supply properties in io-domains nodes.
Fix them all into ".*-supply$" format.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210606181632.13371-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Registers for adjusting the spread spectrum clocking (SSC) have been
added. As reported by the TI spruhl7x RM, SSC is supported only for LCD
and MPU PLLs, but the PRCM_CM_SSC_DELTAMSTEP_DPLL_XXX and
PRCM_CM_SSC_MODFREQDIV_DPLL_XXX registers, as well as the enable field
in the PRCM_CM_CLKMODE_DPLL_XXX registers are mapped for all PLLs (CORE,
MPU, DDR, PER, DISP, EXTDEV).
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Acked-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210606202253.31649-5-dariobin@libero.it
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Registers for adjusting the spread spectrum clocking (SSC) have been
added. As reported by the TI spruh73x RM, SSC is supported only for LCD
and MPU PLLs, but the CM_SSC_DELTAMSTEP_DPLL_XXX and
CM_SSC_MODFREQDIV_DPLL_XXX registers, as well as the enable field in the
CM_CLKMODE_DPLL_XXX registers are mapped for all PLLs (CORE, MPU, DDR,
PER, DISP).
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Acked-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210606202253.31649-4-dariobin@libero.it
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The Raspberry Pi 400 is like a Pi 4 B designed into a keyboard. But there
are some minor differences:
- higher CPU clock rate (1.8 GHz)
- different Wifi chip (BCM43456)
- power off is now handled via GPIO
- no ACT LED
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1622981777-5023-7-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
- Avoid orphan section in ARM cpuidle (Arnd Bergmann)
- Avoid orphan section with !SMP (Nathan Chancellor)
-----BEGIN PGP SIGNATURE-----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=ZvIL
-----END PGP SIGNATURE-----
Merge tag 'orphans-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull orphan section fixes from Kees Cook:
"These two corner case fixes have been in -next for about a week:
- Avoid orphan section in ARM cpuidle (Arnd Bergmann)
- Avoid orphan section with !SMP (Nathan Chancellor)"
* tag 'orphans-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
vmlinux.lds.h: Avoid orphan section with !SMP
ARM: cpuidle: Avoid orphan section warning
This option is now synonymous with CONFIG_HAVE_CLK, so use
the latter globally. Any out-of-tree platform ports that
still use a private clk_get()/clk_put() implementation should
move to CONFIG_COMMON_CLK.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The 'fsl,ssi' documentation doesn't say anything about specifying this.
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to Documentation/devicetree/bindings/sound/fsl,ssi.txt
'fsl,mode' should be specified for AC97 mode only.
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
interrupt-counter is mainline now, so we can add missing counter nodes.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable Video Processing Unit to make accelerated video decoding work.
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Remove touchscreen-size-* properties. This values are not correct, event if it
works with ts_test tool, it fails to work properly with weston.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
At some point PWM cell count was changed, but it didn't triggered any
error, since this DT was overwriting "#pwm-cells".
To make sure, we are in sync with the kernel driver, remove this
property and fix the pwm consumer.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The backlight power is controlled through the reg_bl_12v0 regulator.
Co-Developed-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add touchscreen support to the Protonic VT7 board.
Co-Developed-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There is a lot of Raspberry Pi specific stuff (neither SoC or board
specific) for the BCM2711 which is currently in the RPi 4 B dts. In order
to avoid copy & paste for every new BCM2711 based Raspberry Pi, move it
into a separate dtsi.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1622981777-5023-4-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
The BCM2711 has a slightly different VEC than the one found in the older
SoCs. Now that we support the new variant, add its compatible to the
device tree.
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210520150344.273900-5-maxime@cerno.tech
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
This reverts commit 278407a53c.
The original change breaks USB config on Raspberry Pi Zero and Pi 4 B,
because it exceeds the total fifo size of 4080. A naive attempt to reduce
g-tx-fifo-size doesn't help on Raspberry Pi Zero. So better go back.
Fixes: 278407a53c ("ARM: dts: bcm283x: increase dwc2's RX FIFO size")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/1622293371-5997-1-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
There's a few instructions that GAS infers operands but Clang doesn't;
from what I can tell the Arm ARM doesn't say these are optional.
F5.1.257 TBB, TBH T1 Halfword variant
F5.1.238 STREXD T1 variant
F5.1.84 LDREXD T1 variant
Link: https://github.com/ClangBuiltLinux/linux/issues/1309
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Jian Cai <jiancai@google.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Use pattern rules to unify similar build rules between OABI and EABI.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
You do not need to pass the abi parameter to syscallnr.sh because it
parses all the lines of syscall.tbl except comments anyway.
Simplify the code. Also, remove unneeded single-quoting.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The directory of mach-types.h is created a couple of lines above:
_dummy := $(shell [ -d '$(kapi)' ] || mkdir -p '$(kapi)') \
The 'mkdir -p' command is redundant.
scripts/Kbuild.include defines real-prereqs as a shorthand for
$(filter-out $(PHONY),$^). Let's use it to simplify the code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
In some configurations when building with gcc-11, prepare_page_table
does not get inline, which causes a build time warning for a section
mismatch:
WARNING: modpost: vmlinux.o(.text.unlikely+0xce8): Section mismatch in reference from the function prepare_page_table() to the (unknown reference) .init.data:(unknown)
The function prepare_page_table() references
the (unknown reference) __initdata (unknown).
This is often because prepare_page_table lacks a __initdata
annotation or the annotation of (unknown) is wrong.
Mark the function as __init to avoid the warning regardless of the
inlining, and remove the 'inline' keyword. The compiler is
free to ignore the 'inline' here and it doesn't result in better
object code or more readable source.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Teach ftrace_make_call() and ftrace_make_nop() about PLTs.
Teach PLT code about FTRACE and all its callbacks.
Otherwise the following might happen:
------------[ cut here ]------------
WARNING: CPU: 14 PID: 2265 at .../arch/arm/kernel/insn.c:14 __arm_gen_branch+0x83/0x8c()
...
Hardware name: LSI Axxia AXM55XX
[<c0314a49>] (unwind_backtrace) from [<c03115e9>] (show_stack+0x11/0x14)
[<c03115e9>] (show_stack) from [<c0519f51>] (dump_stack+0x81/0xa8)
[<c0519f51>] (dump_stack) from [<c032185d>] (warn_slowpath_common+0x69/0x90)
[<c032185d>] (warn_slowpath_common) from [<c03218f3>] (warn_slowpath_null+0x17/0x1c)
[<c03218f3>] (warn_slowpath_null) from [<c03143cf>] (__arm_gen_branch+0x83/0x8c)
[<c03143cf>] (__arm_gen_branch) from [<c0314337>] (ftrace_make_nop+0xf/0x24)
[<c0314337>] (ftrace_make_nop) from [<c038ebcb>] (ftrace_process_locs+0x27b/0x3e8)
[<c038ebcb>] (ftrace_process_locs) from [<c0378d79>] (load_module+0x11e9/0x1a44)
[<c0378d79>] (load_module) from [<c037974d>] (SyS_finit_module+0x59/0x84)
[<c037974d>] (SyS_finit_module) from [<c030e981>] (ret_fast_syscall+0x1/0x18)
---[ end trace e1b64ced7a89adcc ]---
------------[ cut here ]------------
WARNING: CPU: 14 PID: 2265 at .../kernel/trace/ftrace.c:1979 ftrace_bug+0x1b1/0x234()
...
Hardware name: LSI Axxia AXM55XX
[<c0314a49>] (unwind_backtrace) from [<c03115e9>] (show_stack+0x11/0x14)
[<c03115e9>] (show_stack) from [<c0519f51>] (dump_stack+0x81/0xa8)
[<c0519f51>] (dump_stack) from [<c032185d>] (warn_slowpath_common+0x69/0x90)
[<c032185d>] (warn_slowpath_common) from [<c03218f3>] (warn_slowpath_null+0x17/0x1c)
[<c03218f3>] (warn_slowpath_null) from [<c038e87d>] (ftrace_bug+0x1b1/0x234)
[<c038e87d>] (ftrace_bug) from [<c038ebd5>] (ftrace_process_locs+0x285/0x3e8)
[<c038ebd5>] (ftrace_process_locs) from [<c0378d79>] (load_module+0x11e9/0x1a44)
[<c0378d79>] (load_module) from [<c037974d>] (SyS_finit_module+0x59/0x84)
[<c037974d>] (SyS_finit_module) from [<c030e981>] (ret_fast_syscall+0x1/0x18)
---[ end trace e1b64ced7a89adcd ]---
ftrace failed to modify [<e9ef7006>] 0xe9ef7006
actual: 02:f0:3b:fa
ftrace record flags: 0
(0) expected tramp: c0314265
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Will be used in the following patch. No functional change.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
No functional change, later it will be re-used in several files.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Kbuild cleans up files listed in 'targets'.
'piggy_data' is already added to 'targets' a few lines above.
Adding it to 'clean-files' is redundant.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
When linking aspeed_g5_defconfig with ld.lld 10.0.1, the following error
occurs:
ld.lld: error: .tmp_vmlinux.kallsyms1:(.ARM.exidx+0x34D98): relocation
R_ARM_PREL31 out of range: 2135538592 is not in [-1073741824,
1073741823]
This was resolved in ld.lld 11.0.0 but the minimum supported version of
ld.lld for the kernel is 10.0.1. Prevent CONFIG_UNWINDER_ARM from being
selected in this case so that the problematic sections cannot be
created.
Link: https://github.com/ClangBuiltLinux/linux/issues/732
Link: 48aebfc908
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Rather than using "m" (which is the unit of metres, or milli), and
"MB" in the printk statements, use MiB to make it clear that we are
talking about the power-of-2 megabytes, aka mebibytes.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Yanfei Xu <yanfei.xu@windriver.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Make the default vmalloc size clearer by using a more natural
multiplication by SZ_1M rather than a shift left by 20 bits.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Yanfei Xu <yanfei.xu@windriver.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Rather than storing the start of vmalloc space, store the size, and
move the calculation into adjust_lowmem_limit(). We now have one single
place where this calculation takes place.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Yanfei Xu <yanfei.xu@windriver.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Change the current vmalloc_min, which is supposed to be the lowest
address of vmalloc space including the VMALLOC_OFFSET, to vmalloc_start
which does not include VMALLOC_OFFSET.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Yanfei Xu <yanfei.xu@windriver.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
We calculate the maximum size of the vmalloc space twice in
early_vmalloc(). Use a temporary variable to hold this value.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Yanfei Xu <yanfei.xu@windriver.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
vmalloc_min is currently a void pointer, but everywhere its used
contains a cast - either to a void pointer when setting or back to
an integer type when being used. Eliminate these casts by changing
its type to unsigned long.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Yanfei Xu <yanfei.xu@windriver.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Swap entries use a faulting PTE which have the least two significant
bits as zero. Due to this, the use of PTE_TYPE_FAULT was overlooked,
but really should have been included in __swp_entry_to_pte().
Convert this macro to use PTE_TYPE_FAULT to properly document what is
going on here, and use __pte() to convert the swp_entry_t to a pte_t.
This results in no change to the resulting kernel image.
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Enable CONFIG_NO_HZ_IDLE and CONFIG_HIGH_RES_TIMERS=y to be used
in conjunction with PIT64B present on SAM9X60.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210406141152.10706-1-claudiu.beznea@microchip.com
These are leds on the IBM proprietary PCIE cards called cable cards.
Cable cards have 2 ports on them and each port has an indicator led.
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210607031259.475020-7-joel@jms.id.au
This commit adds indicator leds for vrms, processors, opencapi
connectors, tpm, planar, power distribution card and dasd
backplane and are driven by PIC16F882.
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210607031259.475020-6-joel@jms.id.au
These are the indicator leds for nvme slots and fans and are
driven by PCA9552.
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210607031259.475020-3-joel@jms.id.au
These are the system level indicator leds that are driven by
PCA9551 connected to the Operator Panel.
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210607031259.475020-2-joel@jms.id.au
While chasing system suspend related regressions, I noticed few other
issues related to PM would be good to have fixed:
- UART idling does not always work for hardware autoidle features
- am335x resume works only the first time unless musb module is loaded
Then there are three patches for omap1 related warnings caused by the gpio
changes, and one build warning fix for legacy mmc platform code when mmc
is built as a loadable module.
These can all be merged whenever suitable naturally. I've sent the more
urgent SATA regression fix separately although it appears in this pull
request too because of the branches merged.
-----BEGIN PGP SIGNATURE-----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=/LY8
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.13/fixes-pm' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
PM and build warning fixes for omaps
While chasing system suspend related regressions, I noticed few other
issues related to PM would be good to have fixed:
- UART idling does not always work for hardware autoidle features
- am335x resume works only the first time unless musb module is loaded
Then there are three patches for omap1 related warnings caused by the gpio
changes, and one build warning fix for legacy mmc platform code when mmc
is built as a loadable module.
These can all be merged whenever suitable naturally. I've sent the more
urgent SATA regression fix separately although it appears in this pull
request too because of the branches merged.
* tag 'omap-for-v5.13/fixes-pm' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP1: ams-delta: remove unused function ams_delta_camera_power
bus: ti-sysc: Fix flakey idling of uarts and stop using swsup_sidle_act
bus: ti-sysc: Fix am335x resume hang for usb otg module
ARM: OMAP2+: Fix build warning when mmc_omap is not built
ARM: OMAP1: isp1301-omap: Add missing gpiod_add_lookup_table function
ARM: OMAP1: Fix use of possibly uninitialized irq variable
Link: https://lore.kernel.org/r/pull-1622614772-543196@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
- Fix missing-prototypes warning of 'imx27_pm_init' in i.MX27 platform
pm code.
- A couple of patches from Fabio Estevam to fix 'tuning-step' property
in imx7d-meerkat96 and imx7d-pico DT.
- Fix '#gpio-cells' of nxp,pca8574 device in imx6qdl-emcon-avari DT.
- A couple of patches from Lucas Stach to fix regulator and voltage for
imx8mq-zii-ultra board.
- Add missing regulators for imx6q-dhcom to avoid possible instability
issues.
- Fix memory-controller settings for fsl-ls1028a DT.
- Fix RGMII clock and voltage for a couple of fsl-ls1028a-kontron-sl28
boards.
- Fix RGMII connection to QCA8334 switch for imx6dl-yapp4 board.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmCu8p4UHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7k+Qf9Ek/atJBjaaVzhbGFQ8HRnDOk4U5J
dR0GbXKSN1zXjDLSBOBRyNcVn2T6lp4LwwYoleC2qG6MNoe6+y7fk1oRdvjkGjRO
ZYfZT/JJl187IN6JsxR8VhRmmcI5/C3bihMbpKoLdHcPGbwC4relfSy99Io94Xfk
CVn3PTxBA4KfoDq/+EiA9HkQ/HwQh/y7KD5yVd6OtLkt9awT1hYW1ttVefp95nAK
5+zTm0Z14U8aGm+wo8jywvSyeXiuMeWDUrweo05XcaHWfcv3T0Wni7tgS2pluxqa
lCMsNQBsZDTk6fUWxqPjjAEl6ks8N1H9L7YIGpq1dOCSYFUqI3jCmkhrFQ==
=5vQk
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.13:
- Fix missing-prototypes warning of 'imx27_pm_init' in i.MX27 platform
pm code.
- A couple of patches from Fabio Estevam to fix 'tuning-step' property
in imx7d-meerkat96 and imx7d-pico DT.
- Fix '#gpio-cells' of nxp,pca8574 device in imx6qdl-emcon-avari DT.
- A couple of patches from Lucas Stach to fix regulator and voltage for
imx8mq-zii-ultra board.
- Add missing regulators for imx6q-dhcom to avoid possible instability
issues.
- Fix memory-controller settings for fsl-ls1028a DT.
- Fix RGMII clock and voltage for a couple of fsl-ls1028a-kontron-sl28
boards.
- Fix RGMII connection to QCA8334 switch for imx6dl-yapp4 board.
* tag 'imx-fixes-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx: emcon-avari: Fix nxp,pca8574 #gpio-cells
ARM: dts: imx7d-pico: Fix the 'tuning-step' property
ARM: dts: imx7d-meerkat96: Fix the 'tuning-step' property
arm64: dts: freescale: sl28: var1: fix RGMII clock and voltage
arm64: dts: freescale: sl28: var4: fix RGMII clock and voltage
ARM: imx: pm-imx27: Include "common.h"
arm64: dts: zii-ultra: fix 12V_MAIN voltage
arm64: dts: zii-ultra: remove second GEN_3V3 regulator instance
arm64: dts: ls1028a: fix memory node
ARM: dts: imx6q-dhcom: Add PU,VDD1P1,VDD2P5 regulators
ARM: dts: imx6dl-yapp4: Fix RGMII connection to QCA8334 switch
Link: https://lore.kernel.org/r/20210527011758.GD8194@dragon
Signed-off-by: Olof Johansson <olof@lixom.net>
Setting assigned clock with a dependency on itself for k2g_clks
creates a circular dependency. Instead, Lets model the audio clock
as a assigned-clock configuration for mcasp and set it up as the
first clock assigned-clock to be satisfied. Following the standard
convention, we use null entries to indicate entries that doesn't need
to be programmed.
Reviewed-by: Tero Kristo <kristo@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
We currently use clocks as the node name for the node representing
TI-SCI clock nodes. This is better renamed to being clock-controller
as that is a better representative of the system controller function
as a clock controller for the SoC.
Reviewed-by: Tero Kristo <kristo@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Lets rename the node name of TI-SCI node to be system-controller as it
is a better standardized name for the function that TI-SCI plays in
the SoC.
Reviewed-by: Tero Kristo <kristo@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Rename message-manager instance node name to be better aligned with
current style of device tree nodes for mailboxes.
Reviewed-by: Tero Kristo <kristo@kernel.org>
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
1. Reorder interrupts
2. Fix typo: s/spi_lr_overhead/spi_lr_overread/
3. Rename node: s/spi-nor@0/flash@0/
This fixes:
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dt.yaml: spi@18029200: interrupt-names: 'oneOf' conditional failed, one must be fixed:
['spi_lr_fullness_reached', 'spi_lr_session_aborted', 'spi_lr_impatient', 'spi_lr_session_done', 'spi_lr_overhead', 'mspi_done', 'mspi_halted'] is too long
Additional items are not allowed ('spi_lr_session_aborted', 'spi_lr_impatient', 'spi_lr_session_done', 'spi_lr_overhead', 'mspi_done', 'mspi_halted' were unexpected)
'mspi_done' was expected
'spi_l1_intr' was expected
'mspi_halted' was expected
'spi_lr_fullness_reached' was expected
'spi_lr_session_aborted' was expected
'spi_lr_impatient' was expected
'spi_lr_session_done' was expected
'spi_lr_overread' was expected
From schema: Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dt.yaml: spi-nor@0: $nodename:0: 'spi-nor@0' does not match '^flash(@.*)?$'
From schema: Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
GEHC CS ONE (codename is PPD), has multiple microcontrollers connected
via UART controlling. UART2 is connected to an on-board microcontroller
at 19200 baud, which constantly pushes critical data (so aging character
detect interrupt will never trigger). This data must be processed at
50-200 Hz, so UART should return data in less than 5-20ms. With 1024
byte DMA buffer (and a constant data stream) the read operation instead
needs 1024 byte / 19200 baud = 53.333ms, which is way too long (note:
Worst case would be remote processor sending data with short pauses <=
7 characters, which would further increase this number). The current
downstream kernel instead configures 24 bytes resulting in 1.25ms, but
that is obviously not sensible for normal UART use cases and cannot be
used as new default.
The same device also has another microcontroller with a 4M baud connected
to UART5 exchanging lots of data. For this the same mechanism can be used
to increase the buffer size (downstream uses 4K instead of the default 1K)
with potentially slightly reduced buffer count. At this baud rate latency
is not an issue (4096 byte / 4M baud = 0.977 ms). Before increasing the
default buffer count from 4 to 16 in 76c38d30fe, this was required to
avoid data loss. With the changed default it's a performance optimization.
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
[replace commit message]
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20210430175038.103226-3-sebastian.reichel@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These LEDs are directly connected to the BMC's GPIO bank
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
The 4U fans do not need a different "tach-pulses" property than the 2U
machine. In addition, the "maxim,fan-dual-tach" property does not exist
upstream yet, so it should also be removed.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Correct two PCA chips which were placed on the wrong I2C bus and
address.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Santosh Puranik <santosh.puranik@in.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Kprobes has a counter 'nmissed', that is used to count the number of
times a probe handler was not called. This generally happens when we hit
a kprobe while handling another kprobe.
However, if one of the probe handlers causes a fault, we are currently
incrementing 'nmissed'. The comment in fault handler indicates that this
can be used to account faults taken by the probe handlers. But, this has
never been the intention as is evident from the comment above 'nmissed'
in 'struct kprobe':
/*count the number of times this probe was temporarily disarmed */
unsigned long nmissed;
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lkml.kernel.org/r/20210601120150.672652-1-naveen.n.rao@linux.vnet.ibm.com
The ixp4xx_crypto driver traditionally registers a bare platform
device without attaching it to a driver, and detects the hardware
at module init time by reading an SoC specific hardware register.
Change this to the conventional method of registering the platform
device from the platform code itself when the device is present,
turning the module_init/module_exit functions into probe/release
driver callbacks.
This enables compile-testing as well as potentially having ixp4xx
coexist with other ARMv5 platforms in the same kernel in the future.
Cc: Corentin Labbe <clabbe@baylibre.com>
Tested-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When building the kernel wtih gcc-10 or higher using the
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y flag, the compiler picks a slightly
different set of registers for the inline assembly in cpu_init() that
subsequently results in a corrupt kernel stack as well as remaining in
FIQ mode. If a banked register is used for the last argument, the wrong
version of that register gets loaded into CPSR_c. When building in Arm
mode, the arguments are passed as immediate values and the bug cannot
happen.
This got introduced when Daniel reworked the FIQ handling and was
technically always broken, but happened to work with both clang and gcc
before gcc-10 as long as they picked one of the lower registers.
This is probably an indication that still very few people build the
kernel in Thumb2 mode.
Marek pointed out the problem on IRC, Arnd narrowed it down to this
inline assembly and Russell pinpointed the exact bug.
Change the constraints to force the final mode switch to use a non-banked
register for the argument to ensure that the correct constant gets loaded.
Another alternative would be to always use registers for the constant
arguments to avoid the #ifdef that has now become more complex.
Cc: <stable@vger.kernel.org> # v3.18+
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Reported-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Fixes: c0e7f7ee71 ("ARM: 8150/3: fiq: Replace default FIQ handler")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The pattern: "^(|usb-|usb2-|usb3-|pci-|pcie-|sata-)phy(@[0-9a-f,]+)*$"
in phy-provider.yaml has required "#phy-cells" for phy nodes.
The "phy-cells" in rockchip-inno-usb2 nodes are located in subnodes.
Rename the nodename to pattern "usb2phy@[0-9a-f]+$" to prevent
notifications.
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210601164800.7670-4-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
As the 32MB flash layout will soon be exhausted, switch to 64MB layout.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Phong Vo <phong@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20210517040036.13667-4-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable PSU support on Ampere's Mt. Jade BMC.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Phong Vo <phong@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20210517040036.13667-3-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable OCP card support on Ampere's Mt. Jade BMC.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Phong Vo <phong@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20210517040036.13667-2-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Most of the aspeed boards have copied the 'earlyprink' string in
the bootargs. However, there's no earlyprink driver configured in the
defconfigs, so this does nothing.
A combination of setting stdout in the chosen node and adding earlycon
to bootargs causes early serial output to appear early. This changes all
boards to use this option.
The console=ttyS4,115200 option is still required, as this is used by
the run time uart driver.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Alexander Filippov <a.filippov@yadro.com>
Link: https://lore.kernel.org/r/20210526051220.136432-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
AST2600 supports 2 SGPIO master interfaces and 2 SGPIO slave interfaces.
Currently, only SGPIO master 1 and SGPIO slve 1 in the pinctrl dtsi.
SGPIO master 2 and slave 2 should be added in pinctrl dtsi as well.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210525055308.31069-3-steven_lee@aspeedtech.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Since commit 83109d5d5f ("x86/build: Warn on orphan section placement"),
we get a warning for objects in orphan sections. The cpuidle implementation
for OMAP causes this when CONFIG_CPU_IDLE is disabled:
arm-linux-gnueabi-ld: warning: orphan section `__cpuidle_method_of_table' from `arch/arm/mach-omap2/pm33xx-core.o' being placed in section `__cpuidle_method_of_table'
arm-linux-gnueabi-ld: warning: orphan section `__cpuidle_method_of_table' from `arch/arm/mach-omap2/pm33xx-core.o' being placed in section `__cpuidle_method_of_table'
arm-linux-gnueabi-ld: warning: orphan section `__cpuidle_method_of_table' from `arch/arm/mach-omap2/pm33xx-core.o' being placed in section `__cpuidle_method_of_table'
Change the definition of CPUIDLE_METHOD_OF_DECLARE() to silently
drop the table and all code referenced from it when CONFIG_CPU_IDLE
is disabled.
Fixes: 06ee7a950b ("ARM: OMAP2+: pm33xx-core: Add cpuidle_ops for am335x/am437x")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201230155506.1085689-1-arnd@kernel.org
Fix pinctrl muxing, PD28, PD29 and PD31 can be muxed to peripheral A. It
allows to use SCK0, SCK1 and SPI0_NPCS2 signals.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Fixes: 679f8d92bb ("ARM: at91/dt: sama5d4: add pioD pin mux mask and enable pioD")
Cc: stable@vger.kernel.org # v4.4+
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20191025084210.14726-1-ludovic.desroches@microchip.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmC0CoEeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG8qYH/0bJOUUsj4fsBHY+
1fSTcbEZYxrdO6nYOzk34UZBeC7rGdhpFFVCU0fh/il8ec3K8pU9ypZykhvpFwGD
cY0zrfaNiEcsIinYZh/tMyfPK3JMqGrcOkKqYli5kSfW9BR0YzHBeiETcHMyZfMu
a8uI9nNYIZda0hwrXMbMNaFMH4Nif3kXwDxNNrx1THaTYifVZK+IwlM8TpcSPIK/
eNbU+5G/VBiQ9YE4PZyXVbsWMZcJ9NDRanx6aKMYTlwSDytxmd5HlURKJcfOiXnQ
AQq9VYbkkuw6FhBPnWvkYVJj1UwkySXjXyZkTiIH8iIMpJ406rWrQgIaQPI3o/98
iVDfH9k=
=t88B
-----END PGP SIGNATURE-----
Merge tag 'v5.13-rc4' into media_tree
Linux 5.13-rc4
* tag 'v5.13-rc4': (976 commits)
Linux 5.13-rc4
seccomp: Refactor notification handler to prepare for new semantics
selftests: kvm: fix overlapping addresses in memslot_perf_test
KVM: X86: Kill off ctxt->ud
KVM: X86: Fix warning caused by stale emulation context
KVM: X86: Use kvm_get_linear_rip() in single-step and #DB/#BP interception
Documentation: seccomp: Fix user notification documentation
MAINTAINERS: adjust to removing i2c designware platform data
perf vendor events powerpc: Fix eventcode of power10 JSON events
Revert "serial: 8250: 8250_omap: Fix possible interrupt storm"
i2c: s3c2410: fix possible NULL pointer deref on read message after write
i2c: mediatek: Disable i2c start_en and clear intr_stat brfore reset
perf stat: Fix error check for bpf_program__attach
cifs: change format of CIFS_FULL_KEY_DUMP ioctl
i2c: i801: Don't generate an interrupt on bus reset
i2c: mpc: implement erratum A-004447 workaround
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers
dt-bindings: i2c: mpc: Add fsl,i2c-erratum-a004447 flag
i2c: busses: i2c-stm32f4: Remove incorrectly placed ' ' from function name
...
The reason for kprobe::fault_handler(), as given by their comment:
* We come here because instructions in the pre/post
* handler caused the page_fault, this could happen
* if handler tries to access user space by
* copy_from_user(), get_user() etc. Let the
* user-specified handler try to fix it first.
Is just plain bad. Those other handlers are ran from non-preemptible
context and had better use _nofault() functions. Also, there is no
upstream usage of this.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20210525073213.561116662@infradead.org
Fix following warning observed with "make dtbs_check W=1" command.
It concerns f429 eval and disco boards, f769 disco board.
Warning (unit_address_vs_reg): /gpio_keys/button@0: node has a unit name,
but no reg or ranges property
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The microSD card detect pin is physically connected to the MPU pin PI3.
The Device Tree configuration of the card detect pin was wrong—it was
set to pin PB7 instead. If such configuration was used, the kernel would
hang on “Waiting for root device” when booting from a microSD card.
Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
