Kabylake A0 is based on Skylake H0.
v2: Don't assume revid+7 and only load the one we are sure about.
v3: Rebase on top of latest changes.
v4: Accept cleaner solution from Jani with kbl_stepping_info
starting on H0 instead of put a hack on revid.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449676319-6959-1-git-send-email-rodrigo.vivi@intel.com
We were not checking the return value of drm_encoder_init() which can
fail. And if it fails then we will be working with an uninitialized
encoder.
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1444312681-10149-2-git-send-email-sudipm.mukherjee@gmail.com
Userspace can pass in an offset that it presumes the object is located
at. The kernel will then do its utmost to fit the object into that
location. The assumption is that userspace is handling its own object
locations (for example along with full-ppgtt) and that the kernel will
rarely have to make space for the user's requests.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
v2: Fixed incorrect eviction found by Michal Winiarski - fix suggested by Chris
Wilson. Fixed incorrect error paths causing crash found by Michal Winiarski.
(Not published externally)
v3: Rebased because of trivial conflict in object_bind_to_vm. Fixed eviction
to allow eviction of soft-pinned objects when another soft-pinned object used
by a subsequent execbuffer overlaps reported by Michal Winiarski.
(Not published externally)
v4: Moved soft-pinned objects to the front of ordered_vmas so that they are
pinned first after an address conflict happens to avoid repeated conflicts in
rare cases (Suggested by Chris Wilson). Expanded comment on
drm_i915_gem_exec_object2.offset to cover this new API.
v5: Added I915_PARAM_HAS_EXEC_SOFTPIN parameter for detecting this capability
(Kristian). Added check for multiple pinnings on eviction (Akash). Made sure
buffers are not considered misplaced without the user specifying
EXEC_OBJECT_SUPPORTS_48B_ADDRESS. User must assume responsibility for any
addressing workarounds. Updated object2.offset field comment again to clarify
NO_RELOC case (Chris). checkpatch cleanup.
v6: Trivial rebase on latest drm-intel-nightly
v7: Catch attempts to pin above the max virtual address size and return
EINVAL (Tvrtko). Decouple EXEC_OBJECT_SUPPORTS_48B_ADDRESS and
EXEC_OBJECT_PINNED flags, user must pass both flags in any attempt to pin
something at an offset above 4GB (Chris, Daniel Vetter).
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Akash Goel <akash.goel@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Zou Nanhai <nanhai.zou@intel.com>
Cc: Kristian Høgsberg <hoegsberg@gmail.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Acked-by: PDT
Signed-off-by: Thomas Daniel <thomas.daniel@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449575707-20933-1-git-send-email-thomas.daniel@intel.com
Let's introduce ULT and ULX Kabylake definitions and start
using it for a propper DDI buffer translation.
v2: Remove extra white space. (Paulo)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
As described in the code comment, I couldn't set the minimum RPS
frequency on my BYT-M B0 to the minimum allowed as reported by Punit.
Fix this by clamping the minimum value to the first one that was
accepted on my machine.
Atm this issue doesn't cause any test failures, since in igt/pm_rps we
only check the cached version of the current frequency which is the same
what has been set. In the future we'll add checks for the actual
frequency too, and for that to pass this fix is necessary.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1417711175-13271-1-git-send-email-imre.deak@intel.com
Currently we disable some parts of FDI setup after a failed link
training. But despite that we continue with the modeset as if everything
is fine. This results in tons of noise from the state checker, and
it means we're not following the proper modeset sequence for the rest of
crtc enabling, nor for crtc disabling.
Ideally we should abort the modeset and follow the proper disable
sequence to shut off everything we enabled so far, but that would
require a big rework of the modeset code. So instead just leave FDI
up and running in its untrained state, and log an error. This is
what we do on older platforms too.
v2: Fix a typo in the commit message
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449260570-14670-1-git-send-email-ville.syrjala@linux.intel.com
Extract the LPT-H VGA dotclock disable to a separate function in
anticipation of further use.
While at it move the sb_lock locking inwards when enabling the VGA
dotclock, as it's only needed to protect the sideband accesses.
v2: Keep the PIXCLK_GATE_GATE name for 0 (Paulo)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449260494-14449-1-git-send-email-ville.syrjala@linux.intel.com
Bspec modeset sequence tells us to disable the PCH transcoder and
FDI after the CRT port on LPT-H, so let's do that. And the CRT port
should be disabled after the pipe, as we do on other PCH platforms
too since
commit 1ea56e269e ("drm/i915: Disable CRT port after pipe on PCH platforms")
commit 00490c22b1 ("drm/i915: Consider SPLL as another shared pll, v2.")
moved the SPLL disable from the .post_disable() hook to some upper
level code, so we can just move the CRT port disabling into the
.post_disable() hook. If we still had the non-shared SPLL, it would have
needed to be moved into the .post_pll_disable() hook.
v2: Actually move the CRT port disable to the .post_disable() hook,
and amend the commit message with more details (Paulo)
v3: Fix typos in commit message (Paulo)
Cc: Paulo Zanoni <przanoni@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449583548-11896-1-git-send-email-ville.syrjala@linux.intel.com
When we want to use SPLL for FDI we want SSC, which means we have to
disable clock bending for the PCH SSC reference (bend and spread are
mutually exclusive). So let's turn off bending when we want spread.
In case the BIOS enabled clock bending for some reason we'll just turn
it off and enable the spread mode instead.
Not sure what happens if the BIOS is actually using the bend source for
HDMI at this time, but I suppose it should be no worse than what already
happens when we simply turn on the spread.
We don't currently use the bend source for anything, and only use the
PCH SSC reference for the SPLL to drive FDI (always with spread).
v2: Fix the %5 vs %10 fumble for SSCDITHPHASE (Paulo)
Add 'WARN_ON(steps % 5 != 0)' sanity check (Paulo)
Fix typos in commit message (Paulo)
Cc: Paulo Zanoni <przanoni@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449260379-14093-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
There is conflicting info between E0 and F0 steppings
for this workarounds. Trust more authoritative source and
be conservative and extend also for F0.
This prevents numerous (>50) gpu hangs with SKL GT4e
during piglit run.
References: HSD: gen9lp/2134184
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449505785-20812-1-git-send-email-mika.kuoppala@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
'commit 97173eaf5 ("drm/i915: PSR: Increase idle_frames")' was a mistake.
The special case it tried to cover was already being covered by
the DP_PSR_NO_TRAIN_ON_EXIT. So this ended up duplicated.
So, instead of reverting that let's take this opportunity and unify
the idle_frame definition in a single place so we standardize the access
and avoid room for that same mistake again.
Few changes with this patch:
1. Instead of just respecting the VBT we set a
global minumum with max(). So we are sure that we will avoid corner cases
in case VBT is doing something we don't understand.
2. Instead of minimum 5 we use 6. When introducing the idle_frames += 4 case
we considered that minimum was 2. All because the off-by-one issue.
v2: Unified idle_frame definition.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449528320-27655-1-git-send-email-rodrigo.vivi@intel.com
This removes pre/post_wm_update from intel_crtc->atomic, and
creates atomic state for it in intel_crtc.
Changes since v1:
- Rebase on top of wm changes.
Changes since v2:
- Split disable_cxsr into a separate patch.
Changes since v3:
- Move some of the changes to intel_wm_need_update.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/56603A49.5000507@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This reverts commit 6d65ba943a.
Mika Kuoppala traced down a use-after-free crash in module unload to
this commit, because ring->last_context is leaked beyond when the
context gets destroyed. Mika submitted a quick fix to patch that up in
the context destruction code, but that's too much of a hack.
The right fix is instead for the ring to hold a full reference onto
it's last context, like we do for legacy contexts.
Since this is causing a regression in BAT it gets reverted before we
can close this.
Cc: Nick Hoath <nicholas.hoath@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Gordon <david.s.gordon@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Alex Dai <yu.dai@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93248
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
This was broken in
commit 6a8beeffed
Author: Wayne Boyer <wayne.boyer@intel.com>
Date: Wed Dec 2 13:28:14 2015 -0800
drm/i915: Clean up device info structure definitions
and I didn't spot this while reviewing. We really need that CI farm up
asap!
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Wayne Boyer <wayne.boyer@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
In commit 2e1b873072 [v4.2]
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Mon Apr 27 13:41:22 2015 +0100
drm/i915: Convert RPS tracking to a intel_rps_client struct
we converted the __i915_wait_request() to take a new intel_rps_client
struct (rather than having to pass fake drm_i915_file_private structs).
However, due to use of passing a void pointer, I didn't spot one
callsite in wait-ioctl was passing the wrong pointer.
Fwiw, the impact of this bug is zero. Along the rps path, we always
first call list_empty(rps) which when we pass in the wrong pointer
always evaluates to false and we return early and never chase the
invalid pointers.
The user visible impact is then wait-ioctl doesn't get the same
waitboosting as the other interfaces (set-domain, throttle), which is a
performance concern for the *very* few users of the wait interface.
There is also a libdrm_intel patch to use the wait-ioctl for
drm_intel_bo_wait_rendering() if anyone feels inclined to review
libdrm_intel patches.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: Add Chris' explanation for why the impact of this is pretty
close to 0.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Beginning with gen7, newer devices repetitively redefine values
for the device info structure members. This patch simplifies the
structure definitions by grouping member value definitions into the
existing GEN7_FEATURES #define and into the new GEN7_LP_FEATURES
and HSW_FEATURES #defines.
Specifically, GEN_DEFAULT_PIPEOFFSETS and IVB_CURSOR_OFFSETS are
added to GEN7_FEATURES and subsequent IVB definitions are simplified.
VLV_FEATURES is defined to differentiate and simplify the
gen7 low power (LP) devices.
HSW_FEATURES is defined and used to simplify all HSW+ devices
except for LP.
v2: Use VLV_FEATURES for the gen7 low power devices. (Jani)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Wayne Boyer <wayne.boyer@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449091694-7681-1-git-send-email-wayne.boyer@intel.com
In intel_prepare_plane_fb, if fb is backed by dma-buf, wait for exclusive
fence
v2: First commit
v3: Remove object_name_lock acquire
Move wait from intel_atomic_commit() to intel_prepare_plane_fb()
v4: Wait only on exclusive fences, interruptible with no timeout
v5: Style tweaks to more closely match rest of file
v6: Properly handle interrupted waits
v7: No change
v8: No change
Link: https://patchwork.kernel.org/patch/7704181/
Signed-off-by: Alex Goins <agoins@nvidia.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
If a buffer is backed by dmabuf, wait on its reservation object's exclusive
fence before flipping.
v2: First commit
v3: Remove object_name_lock acquire
v4: Move wait ahead of mark_page_flip_active
Use crtc->primary->fb to get GEM object instead of pending_flip_obj
use_mmio_flip() return true when exclusive fence is attached
Wait only on exclusive fences, interruptible with no timeout
v5: Move wait from do_mmio_flip to mmio_flip_work_func
Style tweaks to more closely match rest of file
v6: Change back to unintteruptible wait to match __i915_wait_request due to
inability to properly handle interrupted wait.
Warn on error code from waiting.
v7: No change
v8: Test for !reservation_object_signaled_rcu(test_all=FALSE) instead of
obj->base.dma_buf->resv->fence_excl
Link: https://patchwork.kernel.org/patch/7704181/
Signed-off-by: Alex Goins <agoins@nvidia.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Use the first retired request on a new context to unpin
the old context. This ensures that the hw context remains
bound until it has been written back to by the GPU.
Now that the context is pinned until later in the request/context
lifecycle, it no longer needs to be pinned from context_queue to
retire_requests.
This fixes an issue with GuC submission where the GPU might not
have finished writing back the context before it is unpinned. This
results in a GPU hang.
v2: Moved the new pin to cover GuC submission (Alex Dai)
Moved the new unpin to request_retire to fix coverage leak
v3: Added switch to default context if freeing a still pinned
context just in case the hw was actually still using it
v4: Unwrapped context unpin to allow calling without a request
v5: Only create a switch to idle context if the ring doesn't
already have a request pending on it (Alex Dai)
Rename unsaved to dirty to avoid double negatives (Dave Gordon)
Changed _no_req postfix to __ prefix for consistency (Dave Gordon)
Split out per engine cleanup from context_free as it
was getting unwieldy
Corrected locking (Dave Gordon)
v6: Removed some bikeshedding (Mika Kuoppala)
Added explanation of the GuC hang that this fixes (Daniel Vetter)
v7: Removed extra per request pinning from ring reset code (Alex Dai)
Added forced ring unpin/clean in error case in context free (Alex Dai)
Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Issue: VIZ-4277
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Gordon <david.s.gordon@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Alex Dai <yu.dai@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Alex Dai <yu.dai@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
For now, remove the spinlocks that protected the GuC's
statistics block and work queue; they are only accessed
by code that already holds the global struct_mutex, and
so are redundant (until the big struct_mutex rewrite!).
The specific problem that the spinlocks caused was that
if the work queue was full, the driver would try to
spinwait for one jiffy, but with interrupts disabled the
jiffy count would not advance, leading to a system hang.
The issue was found using test case igt/gem_close_race.
The new version will usleep() instead, still holding
the struct_mutex but without any spinlocks.
v4: Reorganize commit message (Dave Gordon)
v3: Remove unnecessary whitespace churn
v2: Clean up wq_lock too
v1: Clean up host2guc lock as well
Signed-off-by: Alex Dai <yu.dai@intel.com>
Reviewed-by: Dave Gordon <david.s.gordon@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449104189-27591-1-git-send-email-yu.dai@intel.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There's no need to stop and restart FBC, which is quite expensive as
we have to revalidate the CRTC state. After flushing a drawing
operation we know the CRTC state hasn't changed, so a nuke
(recompress) should be fine.
v2: Make it simpler (Chris).
v3: Rewrite the patch again due to patch order changes.
v4: Rewrite commit message (Chris).
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/
When running Cinnamon I see way too many pairs of these messages: many
per second. Get rid of them as they're just telling us FBC is working
as expected. We already have the messages for enable/disable, so we
don't really need messages for activation/deactivation.
v2: Rebase after changing the patch order.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/
Directly call intel_fbc_calculate_cfb_size() in the only place that
actually needs it, and use the proper check before removing the stolen
node. IMHO, this change makes our code easier to understand.
v2: Use drm_mm_node_allocated() (Chris).
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/
This was already on my TODO list, and was requested both by Chris and
Ville, for different reasons. The advantages are avoiding a frequent
malloc/free pair, and the locality of having the work structure
embedded in dev_priv. The maximum used memory is also smaller since
previously we could have multiple allocated intel_fbc_work structs at
the same time, and now we'll always have a single one - the one
embedded on dev_priv. Of course, we're now using a little more memory
on the cases where there's nothing scheduled.
The biggest challenge here is to keep everything synchronized the way
it was before.
Currently, when we try to activate FBC, we allocate a new
intel_fbc_work structure. Then later when we conclude we must delay
the FBC activation a little more, we allocate a new intel_fbc_work
struct, and then adjust dev_priv->fbc.fbc_work to point to the new
struct. So when the old work runs - at intel_fbc_work_fn() - it will
check that dev_priv->fbc.fbc_work points to something else, so it does
nothing. Everything is also protected by fbc.lock.
Just cancelling the old delayed work doesn't work because we might
just cancel it after the work function already started to run, but
while it is still waiting to grab fbc.lock. That's why we use the
"dev_priv->fbc.fbc_work == work" check described in the paragraph
above.
So now that we have a single work struct we have to introduce a new
way to synchronize everything. So we're making the work function a
normal work instead of a delayed work, and it will be responsible for
sleeping the appropriate amount of time itself. This way, after it
wakes up it can grab the lock, ask "were we delayed or cancelled?" and
then go back to sleep, enable FBC or give up.
v2:
- Spelling fixes.
- Rebase after changing the patch order.
- Fix ms/jiffies confusion.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/
This moves the pre-gen4 check from update() to enable(). The HAS_DDI
in the original code is not needed since only gen 2/3 have the plane
swapping code.
v2: Rebase.
v3: Extract fbc_on_plane_a_only() (Chris).
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/
One of the problems with the current code is that it frees the CFB and
releases its drm_mm node as soon as we flip FBC's enable bit. This is
bad because after we disable FBC the hardware may still use the CFB
for the rest of the frame, so in theory we should only release the
drm_mm node one frame after we disable FBC. Otherwise, a stolen memory
allocation done right after an FBC disable may result in either
corrupted memory for the new owner of that memory region or corrupted
screen/underruns in case the new owner changes it while the hardware
is still reading it. This case is not exactly easy to reproduce since
we currently don't do a lot of stolen memory allocations, but I see
patches on the mailing list trying to expose stolen memory to user
space, so races will be possible.
I thought about three different approaches to solve this, and they all
have downsides.
The first approach would be to simply use multiple drm_mm nodes and
freeing the unused ones only after a frame has passed. The problem
with this approach is that since stolen memory is rather small,
there's a risk we just won't be able to allocate a new CFB from stolen
if the previous one was not freed yet. This could happen in case we
quickly disable FBC from pipe A and decide to enable it on pipe B, or
just if we change pipe A's fb stride while FBC is enabled.
The second approach would be similar to the first one, but maintaining
a single drm_mm node and keeping track of when it can be reused. This
would remove the disadvantage of not having enough space for two
nodes, but would create the new problem where we may not be able to
enable FBC at the point intel_fbc_update() is called, so we would have
to add more code to retry updating FBC after the time has passed. And
that can quickly get too complex since we can get invalidate, flush,
disable and other calls in the middle of the wait.
Both solutions above - and also the current code - have the problem
that we unnecessarily free+realloc FBC during invalidate+flush
operations even if the CFB size doesn't change.
The third option would be to move the allocation/deallocation to
enable/disable. This makes sure that the pipe is always disabled when
we allocate/deallocate the CFB, so there's no risk that the FBC
hardware may read or write to the memory right after it is freed from
drm_mm. The downside is that it is possible for user space to change
the buffer stride without triggering a disable/enable - only
deactivate/activate -, so we'll have to handle this case somehow - see
igt's kms_frontbuffer_tracking test, fbc-stridechange subtest. It
could be possible to implement a way to free+alloc the CFB during said
stride change, but it would involve a lot of book-keeping - exactly as
mentioned above - just for on case, so for now I'll keep it simple and
just deactivate FBC. Besides, we may not even need to disable FBC
since we do CFB over-allocation.
Note from Chris: "Starting a fullscreen client that covers a single
monitor in a multi-monitor setup will trigger a change in stride on
one of the CRTCs (the monitors will be flipped independently).". It
shouldn't be a huge problem if we lose FBC on multi-monitor setups
since these setups already have problems reaching deep PC states
anyway.
v2: Rebase after changing the patch order.
v3:
- Remove references to the stride change case being "uncommon" and
paste Chris' example.
- Rebase after a change in a previous patch.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/
The goal is to call FBC enable/disable only once per modeset, while
activate/deactivate/update will be called multiple times.
The enable() function will be responsible for deciding if a CRTC will
have FBC on it and then it will "lock" FBC on this CRTC: it won't be
possible to change FBC's CRTC until disable(). With this, all checks
and resource acquisition that only need to be done once per modeset
can be moved from update() to enable(). And then the update(),
activate() and deactivate() code will also get simpler since they
won't need to worry about the CRTC being changed.
The disable() function will do the reverse operation of enable(). One
of its features is that it should only be called while the pipe is
already off. This guarantees that FBC is stopped and nothing is
using the CFB.
With this, the activate() and deactivate() functions just start and
temporarily stop FBC. They are the ones touching the hardware enable
bit, so HW state reflects dev_priv->crtc.active.
The last function remaining is update(). A lot of times I thought
about renaming update() to activate() or try_to_activate() since it's
called when we want to activate FBC. The thing is that update() may
not only decide to activate FBC, but also deactivate or keep it on the
same state, so I'll leave this name for now.
Moving code to enable() and disable() will also help in case we decide
to move FBC to pipe_config or something else later.
The current patch only puts the very basic code on enable() and
disable(). The next commits will take care of moving more stuff from
update() to the new functions.
v2:
- Rebase.
- Improve commit message (Chris).
v3: Rebase after changing the patch order.
v4: Rebase again after upstream changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/
The long term goal is to have enable/disable as the higher level
functions and activate/deactivate as the lower level functions, just
like we do for PSR and for the CRTC. This way, we'll run enable and
disable once per modeset, while update, activate and deactivate will
be run many times. With this, we can move the checks and code that
need to run only once per modeset to enable(), making the code simpler
and possibly a little faster.
This patch is just the first step on the conversion: it starts by
converting the current low level functions from enable/disable to
activate/deactivate. This patch by itself has no benefits other than
making review and rebase easier. Please see the next patches for more
details on the conversion.
v2:
- Rebase.
- Improve commit message (Chris).
v3: Rebase after changing the patch order.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/
There's no need to reevaluate the status of every single crtc when a
single crtc changes its state.
With this, we're cutting the case where due to a change in pipe B,
intel_fbc_update() is called, then intel_fbc_find_crtc() concludes FBC
should be enabled on pipe A, then it completely rechecks the state of
pipe A only to conclude FBC should remain enabled on pipe A. If any
change on pipe A triggers a need to recompute whether FBC is valid on
pipe A, then at some point someone is going to call
intel_fbc_update(PIPE_A).
The addition of intel_fbc_deactivate() is necessary so we keep track
of the previously selected CRTC when we do invalidate/flush. We're
also going to continue the enable/disable/activate/deactivate concept
in the next patches.
v2: Rebase.
v3: Rebase after changing the patch order.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/
This thing where we need to get the crtc either from the work
structure or the fbc structure itself is confusing and unnecessary.
Set fbc.crtc right when scheduling the enable work so we can always
use it.
The problem is not what gets passed and how to retrieve it. The
problem is that when we're in the other parts of the code we always
have to keep in mind that if FBC is already enabled we have to get the
CRTC from place A, if FBC is scheduled we have to get the CRTC from
place B, and if it's disabled there's no CRTC. Having a single place
to retrieve the CRTC from allows us to treat the "is enabled" and "is
scheduled" cases as the same case, reducing the mistake surface. I
guess I should add this to the commit message.
Besides the immediate advantages, this is also going to make one of
the next commits much simpler. And even later, when we introduce
enable/disable + activate/deactivate, this will be even simpler as
we'll set the CRTC at enable time. So all the
activate/deactivate/update code can just look at the single CRTC
variable regardless of the current state.
v2: Improve commit message (Chris).
v3: Rebase after changing the patch order.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/
In function find_compression_threshold() we try to over-allocate CFB
space in order to reduce reallocations and fragmentation, and we're
not considering that at the CFB size check. Consider it.
There is also a longer-term plan to kill
dev_priv->fbc.uncompressed_size, but this will come later.
v2: Use drm_mm_node_allocated() (Chris).
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/
Choose between i2c bit banging and gmbus in a new higher level function,
and let the i2c core retry the first time we fall back to bit banging.
The i2c core imposes a timeout on -EAGAIN, but it defaults to 1 second,
and shouldn't be a problem for us.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1448980166-23055-2-git-send-email-jani.nikula@intel.com
Unfortunatey there appear to quite a few HSW/BDW machines (eg.
NUCs, Brix Pro) in the wild with LPT/WPT-H that have no physical
CRT connector and non-working FDI. FDI training fails every
single time on these machines. Dunno, maybe they just didn't
bother wiring it up or something?
Unfortunately all the fuse bits and whatnot are telling us that
the CRT connector is present. And so what we get from this is tons
of false positives from the CI systems due to VGA connector forcing.
I've not found any way to detect this purely from hardware, so we
have to resort to looking at the VBT int_crt_support bit. We used
to check this bit on all platforms, but that broke all the old
machines, so the check was then restricted to VLV only in
commit 84b4e042c4 ("drm/i915: only apply crt_present check on VLV")
Considering HSW and VLV VBT probably got defined around the same time,
it should be reasonably safe to assume that the bits is sane for
HSW/BDW as well. At least I have one copy of some VBT spec here that
says it's meant for both VLV and HSW, and it knows about the bit
(lists it being valid from version 155 onwards). Also I have two
desktop machines with actual CRT ports and both have
int_crt_support==1 in their VBTs.
Also we already trust VBT >= 155 to tell us various details about
the DDI ports, so trusting it a bit more seems reasonable.
As far as VLV goes, the added VBT version check should be fine. Even
if someone has some weird VLV machine with a very old VBT version,
it just means they'll end up with a shadow CRT connector. IIRC the
reason for eliminating the shadow CRT connector on VLV was to speed
up display probing rather than fixing something more serious.
v2: Move the platform checks into the VBT parsing code
Also check that the VBT version is at least 155
v3: Improve commit message (Paulo)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449005493-15487-1-git-send-email-ville.syrjala@linux.intel.com
