If in perf_trace_event_init(), the perf_trace_event_open() fails, then it
will call perf_trace_event_unreg() which will not only unregister the perf
trace event, but will also call the put() function of the tp_event.
The problem here is that the trace_event_try_get_ref() is called by the
caller of perf_trace_event_init() and if perf_trace_event_init() returns a
failure, it will then call trace_event_put(). But since the
perf_trace_event_unreg() already called the trace_event_put() function, it
triggers a WARN_ON().
WARNING: CPU: 1 PID: 30309 at kernel/trace/trace_dynevent.c:46 trace_event_dyn_put_ref+0x15/0x20
If perf_trace_event_reg() does not call the trace_event_try_get_ref() then
the perf_trace_event_unreg() should not be calling trace_event_put(). This
breaks symmetry and causes bugs like these.
Pull out the trace_event_put() from perf_trace_event_unreg() and call it
in the locations that perf_trace_event_unreg() is called. This not only
fixes this bug, but also brings back the proper symmetry of the reg/unreg
vs get/put logic.
Link: https://lore.kernel.org/all/cover.1660347763.git.kjlx@templeofstupid.com/
Link: https://lkml.kernel.org/r/20220816192817.43d5e17f@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes: 1d18538e6a ("tracing: Have dynamic events have a ref counter")
Reported-by: Krister Johansen <kjlx@templeofstupid.com>
Reviewed-by: Krister Johansen <kjlx@templeofstupid.com>
Tested-by: Krister Johansen <kjlx@templeofstupid.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
If the perf buffer isn't large enough, provide a hint about how large it
needs to be for whatever is running.
Link: https://lkml.kernel.org/r/20210831043723.13481-1-robbat2@gentoo.org
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
With CONFIG_DEBUG_PREEMPT we observed reports like:
BUG: using smp_processor_id() in preemptible
caller is perf_ftrace_function_call+0x6f/0x2e0
CPU: 1 PID: 680 Comm: a.out Not tainted
Call Trace:
<TASK>
dump_stack_lvl+0x8d/0xcf
check_preemption_disabled+0x104/0x110
? optimize_nops.isra.7+0x230/0x230
? text_poke_bp_batch+0x9f/0x310
perf_ftrace_function_call+0x6f/0x2e0
...
__text_poke+0x5/0x620
text_poke_bp_batch+0x9f/0x310
This telling us the CPU could be changed after task is preempted, and
the checking on CPU before preemption will be invalid.
Since now ftrace_test_recursion_trylock() will help to disable the
preemption, this patch just do the checking after trylock() to address
the issue.
Link: https://lkml.kernel.org/r/54880691-5fe2-33e7-d12f-1fa6136f5183@linux.alibaba.com
CC: Steven Rostedt <rostedt@goodmis.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Jisheng Zhang <jszhang@kernel.org>
Reported-by: Abaci <abaci@linux.alibaba.com>
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As dynamic events are not created by modules, if something is attached to
one, calling "try_module_get()" on its "mod" field, is not going to keep
the dynamic event from going away.
Since dynamic events do not need the "mod" pointer of the event structure,
make a union out of it in order to save memory (there's one structure for
each of the thousand+ events in the kernel), and have any event with the
DYNAMIC flag set to use a ref counter instead.
Link: https://lore.kernel.org/linux-trace-devel/20210813004448.51c7de69ce432d338f4d226b@kernel.org/
Link: https://lkml.kernel.org/r/20210817035027.174869074@goodmis.org
Suggested-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The state of the interrupts (irqflags) and the preemption counter are
both passed down to tracing_generic_entry_update(). Only one bit of
irqflags is actually required: The on/off state. The complete 32bit
of the preemption counter isn't needed. Just whether of the upper bits
(softirq, hardirq and NMI) are set and the preemption depth is needed.
The irqflags and the preemption counter could be evaluated early and the
information stored in an integer `trace_ctx'.
tracing_generic_entry_update() would use the upper bits as the
TRACE_FLAG_* and the lower 8bit as the disabled-preemption depth
(considering that one must be substracted from the counter in one
special cases).
The actual preemption value is not used except for the tracing record.
The `irqflags' variable is mostly used only for the tracing record. An
exception here is for instance wakeup_tracer_call() or
probe_wakeup_sched_switch() which explicilty disable interrupts and use
that `irqflags' to save (and restore) the IRQ state and to record the
state.
Struct trace_event_buffer has also the `pc' and flags' members which can
be replaced with `trace_ctx' since their actual value is not used
outside of trace recording.
This will reduce tracing_generic_entry_update() to simply assign values
to struct trace_entry. The evaluation of the TRACE_FLAG_* bits is moved
to _tracing_gen_ctx_flags() which replaces preempt_count() and
local_save_flags() invocations.
As an example, ftrace_syscall_enter() may invoke:
- trace_buffer_lock_reserve() -> … -> tracing_generic_entry_update()
- event_trigger_unlock_commit()
-> ftrace_trace_stack() -> … -> tracing_generic_entry_update()
-> ftrace_trace_userstack() -> … -> tracing_generic_entry_update()
In this case the TRACE_FLAG_* bits were evaluated three times. By using
the `trace_ctx' they are evaluated once and assigned three times.
A build with all tracers enabled on x86-64 with and without the patch:
text data bss dec hex filename
21970669 17084168 7639260 46694097 2c87ed1 vmlinux.old
21970293 17084168 7639260 46693721 2c87d59 vmlinux.new
text shrank by 379 bytes, data remained constant.
Link: https://lkml.kernel.org/r/20210125194511.3924915-2-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
In preparation to have arguments of a function passed to callbacks attached
to functions as default, change the default callback prototype to receive a
struct ftrace_regs as the forth parameter instead of a pt_regs.
For callbacks that set the FL_SAVE_REGS flag in their ftrace_ops flags, they
will now need to get the pt_regs via a ftrace_get_regs() helper call. If
this is called by a callback that their ftrace_ops did not have a
FL_SAVE_REGS flag set, it that helper function will return NULL.
This will allow the ftrace_regs to hold enough just to get the parameters
and stack pointer, but without the worry that callbacks may have a pt_regs
that is not completely filled.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This adds CONFIG_FTRACE_RECORD_RECURSION that will record to a file
"recursed_functions" all the functions that caused recursion while a
callback to the function tracer was running.
Link: https://lkml.kernel.org/r/20201106023548.102375687@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Guo Ren <guoren@kernel.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-csky@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-s390@vger.kernel.org
Cc: live-patching@vger.kernel.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If a ftrace callback requires "rcu_is_watching", then it adds the
FTRACE_OPS_FL_RCU flag and it will not be called if RCU is not "watching".
But this means that it will use a trampoline when called, and this slows
down the function tracing a tad. By checking rcu_is_watching() from within
the callback, it no longer needs the RCU flag set in the ftrace_ops and it
can be safely called directly.
Link: https://lkml.kernel.org/r/20201028115613.591878956@goodmis.org
Link: https://lkml.kernel.org/r/20201106023547.711035826@goodmis.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If a ftrace callback does not supply its own recursion protection and
does not set the RECURSION_SAFE flag in its ftrace_ops, then ftrace will
make a helper trampoline to do so before calling the callback instead of
just calling the callback directly.
The default for ftrace_ops is going to change. It will expect that handlers
provide their own recursion protection, unless its ftrace_ops states
otherwise.
Link: https://lkml.kernel.org/r/20201028115613.444477858@goodmis.org
Link: https://lkml.kernel.org/r/20201106023547.466892083@goodmis.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
In current mainline, the degree of access to perf_event_open(2) system
call depends on the perf_event_paranoid sysctl. This has a number of
limitations:
1. The sysctl is only a single value. Many types of accesses are controlled
based on the single value thus making the control very limited and
coarse grained.
2. The sysctl is global, so if the sysctl is changed, then that means
all processes get access to perf_event_open(2) opening the door to
security issues.
This patch adds LSM and SELinux access checking which will be used in
Android to access perf_event_open(2) for the purposes of attaching BPF
programs to tracepoints, perf profiling and other operations from
userspace. These operations are intended for production systems.
5 new LSM hooks are added:
1. perf_event_open: This controls access during the perf_event_open(2)
syscall itself. The hook is called from all the places that the
perf_event_paranoid sysctl is checked to keep it consistent with the
systctl. The hook gets passed a 'type' argument which controls CPU,
kernel and tracepoint accesses (in this context, CPU, kernel and
tracepoint have the same semantics as the perf_event_paranoid sysctl).
Additionally, I added an 'open' type which is similar to
perf_event_paranoid sysctl == 3 patch carried in Android and several other
distros but was rejected in mainline [1] in 2016.
2. perf_event_alloc: This allocates a new security object for the event
which stores the current SID within the event. It will be useful when
the perf event's FD is passed through IPC to another process which may
try to read the FD. Appropriate security checks will limit access.
3. perf_event_free: Called when the event is closed.
4. perf_event_read: Called from the read(2) and mmap(2) syscalls for the event.
5. perf_event_write: Called from the ioctl(2) syscalls for the event.
[1] https://lwn.net/Articles/696240/
Since Peter had suggest LSM hooks in 2016 [1], I am adding his
Suggested-by tag below.
To use this patch, we set the perf_event_paranoid sysctl to -1 and then
apply selinux checking as appropriate (default deny everything, and then
add policy rules to give access to domains that need it). In the future
we can remove the perf_event_paranoid sysctl altogether.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Co-developed-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: James Morris <jmorris@namei.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: rostedt@goodmis.org
Cc: Yonghong Song <yhs@fb.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: jeffv@google.com
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: primiano@google.com
Cc: Song Liu <songliubraving@fb.com>
Cc: rsavitski@google.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Matthew Garrett <matthewgarrett@google.com>
Link: https://lkml.kernel.org/r/20191014170308.70668-1-joel@joelfernandes.org
All callers of tracing_generic_entry_update() have to initialize
entry->type, so let's just simply move it inside.
Link: http://lkml.kernel.org/r/20190525165802.25944-2-xiyou.wangcong@gmail.com
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The first version of this method was missing the check for
`ret == PATH_MAX`; then such a check was added, but it didn't call kfree()
on error, so there was still a small memory leak in the error case.
Fix it by using strndup_user() instead of open-coding it.
Link: http://lkml.kernel.org/r/20190220165443.152385-1-jannh@google.com
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 0eadcc7a7b ("perf/core: Fix perf_uprobe_init()")
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This patch enables uprobes with reference counter in fd-based uprobe.
Highest 32 bits of perf_event_attr.config is used to stored offset
of the reference count (semaphore).
Format information in /sys/bus/event_source/devices/uprobe/format/ is
updated to reflect this new feature.
Link: http://lkml.kernel.org/r/20181002053636.1896903-1-songliubraving@fb.com
Cc: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-and-tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Similarly to the uprobe PMU fix in perf_kprobe_init(), fix error
handling in perf_uprobe_init() as well.
Reported-by: 范龙飞 <long7573@126.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: e12f03d703 ("perf/core: Implement the 'perf_kprobe' PMU")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch adds perf_uprobe support with similar pattern as previous
patch (for kprobe).
Two functions, create_local_trace_uprobe() and
destroy_local_trace_uprobe(), are created so a uprobe can be created
and attached to the file descriptor created by perf_event_open().
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Yonghong Song <yhs@fb.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Cc: <daniel@iogearbox.net>
Cc: <davem@davemloft.net>
Cc: <kernel-team@fb.com>
Cc: <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171206224518.3598254-7-songliubraving@fb.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A new PMU type, perf_kprobe is added. Based on attr from perf_event_open(),
perf_kprobe creates a kprobe (or kretprobe) for the perf_event. This
kprobe is private to this perf_event, and thus not added to global
lists, and not available in tracefs.
Two functions, create_local_trace_kprobe() and
destroy_local_trace_kprobe() are added to created and destroy these
local trace_kprobe.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Yonghong Song <yhs@fb.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Cc: <daniel@iogearbox.net>
Cc: <davem@davemloft.net>
Cc: <kernel-team@fb.com>
Cc: <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171206224518.3598254-6-songliubraving@fb.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
ops->flags _should_ be 0 at this point, so setting the flag using
bitwise or is a bit daft.
Link: http://lkml.kernel.org/r/20171011080224.315585202@infradead.org
Requested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The function-trace <-> perf interface is a tad messed up. Where all
the other trace <-> perf interfaces use a single trace hook
registration and use per-cpu RCU based hlist to iterate the events,
function-trace actually needs multiple hook registrations in order to
minimize function entry patching when filters are present.
The end result is that we iterate events both on the trace hook and on
the hlist, which results in reporting events multiple times.
Since function-trace cannot use the regular scheme, fix it the other
way around, use singleton hlists.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Revert commit:
75e8387685 ("perf/ftrace: Fix double traces of perf on ftrace:function")
The reason I instantly stumbled on that patch is that it only addresses the
ftrace situation and doesn't mention the other _5_ places that use this
interface. It doesn't explain why those don't have the problem and if not, why
their solution doesn't work for ftrace.
It doesn't, but this is just putting more duct tape on.
Link: http://lkml.kernel.org/r/20171011080224.200565770@infradead.org
Cc: Zhou Chengming <zhouchengming1@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When running perf on the ftrace:function tracepoint, there is a bug
which can be reproduced by:
perf record -e ftrace:function -a sleep 20 &
perf record -e ftrace:function ls
perf script
ls 10304 [005] 171.853235: ftrace:function:
perf_output_begin
ls 10304 [005] 171.853237: ftrace:function:
perf_output_begin
ls 10304 [005] 171.853239: ftrace:function:
task_tgid_nr_ns
ls 10304 [005] 171.853240: ftrace:function:
task_tgid_nr_ns
ls 10304 [005] 171.853242: ftrace:function:
__task_pid_nr_ns
ls 10304 [005] 171.853244: ftrace:function:
__task_pid_nr_ns
We can see that all the function traces are doubled.
The problem is caused by the inconsistency of the register
function perf_ftrace_event_register() with the probe function
perf_ftrace_function_call(). The former registers one probe
for every perf_event. And the latter handles all perf_events
on the current cpu. So when two perf_events on the current cpu,
the traces of them will be doubled.
So this patch adds an extra parameter "event" for perf_tp_event,
only send sample data to this event when it's not NULL.
Signed-off-by: Zhou Chengming <zhouchengming1@huawei.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: alexander.shishkin@linux.intel.com
Cc: huawei.libin@huawei.com
Link: http://lkml.kernel.org/r/1503668977-12526-1-git-send-email-zhouchengming1@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull networking updates from David Miller:
"Highlights:
1) Support SPI based w5100 devices, from Akinobu Mita.
2) Partial Segmentation Offload, from Alexander Duyck.
3) Add GMAC4 support to stmmac driver, from Alexandre TORGUE.
4) Allow cls_flower stats offload, from Amir Vadai.
5) Implement bpf blinding, from Daniel Borkmann.
6) Optimize _ASYNC_ bit twiddling on sockets, unless the socket is
actually using FASYNC these atomics are superfluous. From Eric
Dumazet.
7) Run TCP more preemptibly, also from Eric Dumazet.
8) Support LED blinking, EEPROM dumps, and rxvlan offloading in mlx5e
driver, from Gal Pressman.
9) Allow creating ppp devices via rtnetlink, from Guillaume Nault.
10) Improve BPF usage documentation, from Jesper Dangaard Brouer.
11) Support tunneling offloads in qed, from Manish Chopra.
12) aRFS offloading in mlx5e, from Maor Gottlieb.
13) Add RFS and RPS support to SCTP protocol, from Marcelo Ricardo
Leitner.
14) Add MSG_EOR support to TCP, this allows controlling packet
coalescing on application record boundaries for more accurate
socket timestamp sampling. From Martin KaFai Lau.
15) Fix alignment of 64-bit netlink attributes across the board, from
Nicolas Dichtel.
16) Per-vlan stats in bridging, from Nikolay Aleksandrov.
17) Several conversions of drivers to ethtool ksettings, from Philippe
Reynes.
18) Checksum neutral ILA in ipv6, from Tom Herbert.
19) Factorize all of the various marvell dsa drivers into one, from
Vivien Didelot
20) Add VF support to qed driver, from Yuval Mintz"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1649 commits)
Revert "phy dp83867: Fix compilation with CONFIG_OF_MDIO=m"
Revert "phy dp83867: Make rgmii parameters optional"
r8169: default to 64-bit DMA on recent PCIe chips
phy dp83867: Make rgmii parameters optional
phy dp83867: Fix compilation with CONFIG_OF_MDIO=m
bpf: arm64: remove callee-save registers use for tmp registers
asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions
switchdev: pass pointer to fib_info instead of copy
net_sched: close another race condition in tcf_mirred_release()
tipc: fix nametable publication field in nl compat
drivers: net: Don't print unpopulated net_device name
qed: add support for dcbx.
ravb: Add missing free_irq() calls to ravb_close()
qed: Remove a stray tab
net: ethernet: fec-mpc52xx: use phy_ethtool_{get|set}_link_ksettings
net: ethernet: fec-mpc52xx: use phydev from struct net_device
bpf, doc: fix typo on bpf_asm descriptions
stmmac: hardware TX COE doesn't work when force_thresh_dma_mode is set
net: ethernet: fs-enet: use phy_ethtool_{get|set}_link_ksettings
net: ethernet: fs-enet: use phydev from struct net_device
...
split allows to move expensive update of 'struct trace_entry' to later phase.
Repurpose unused 1st argument of perf_tp_event() to indicate event type.
While splitting use temp variable 'rctx' instead of '*rctx' to avoid
unnecessary loads done by the compiler due to -fno-strict-aliasing
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
avoid memset in perf_fetch_caller_regs, since it's the critical path of all tracepoints.
It's called from perf_sw_event_sched, perf_event_task_sched_in and all of perf_trace_##call
with this_cpu_ptr(&__perf_regs[..]) which are zero initialized by perpcu init logic and
subsequent call to perf_arch_fetch_caller_regs initializes the same fields on all archs,
so we can safely drop memset from all of the above cases and move it into
perf_ftrace_function_call that calls it with stack allocated pt_regs.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we check sample type for ftrace:function events
even if it's not created as a sampling event. That prevents
creating ftrace_function event in counting mode.
Make sure we check sample types only for sampling events.
Before:
$ sudo perf stat -e ftrace:function ls
...
Performance counter stats for 'ls':
<not supported> ftrace:function
0.001983662 seconds time elapsed
After:
$ sudo perf stat -e ftrace:function ls
...
Performance counter stats for 'ls':
44,498 ftrace:function
0.037534722 seconds time elapsed
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1458138873-1553-2-git-send-email-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
minor fixes.
Here's what else is new:
o A new TRACE_EVENT_FN_COND macro, combining both _FN and _COND for
those that want both.
o New selftest to test the instance create and delete
o Better debug output when ftrace fails
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWlU8tAAoJEKKk/i67LK/8JckH/2XIhjwMunm35uCg1308sDqy
d44G3+p0pm8ztjBf8iD8wH2nP3m7z+nC8JBmSPIUgAHsKOYHWsBy2A/36OVWv5lK
1hVXvBwOuZXnyWXr7bC2RO9S9f9acSFaabZXWDi1BCJRJSgEcknz32V7ZAL4jOCO
SfBWBNrWJfUsURbfbElfVxPLArvyUg9Bb5dW5B+QFf6PuoJaORYzNLYXHlbsq++T
WlrlnD+mFZ/DKFZ/gl3FMSGMPaGimw09/3eqMzv/tLQobp6PbCWlJTwjUoxJ/9dO
XOY4sWUrUUZilU8qCk0i0ZSEumWmE+SWS3eq+Ef18B/5haIj/LkoM4UQD3h2Rc4=
=FDR+
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"Not much new with tracing for this release. Mostly just clean ups and
minor fixes.
Here's what else is new:
- A new TRACE_EVENT_FN_COND macro, combining both _FN and _COND for
those that want both.
- New selftest to test the instance create and delete
- Better debug output when ftrace fails"
* tag 'trace-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (24 commits)
ftrace: Fix the race between ftrace and insmod
ftrace: Add infrastructure for delayed enabling of module functions
x86: ftrace: Fix the comments for ftrace_modify_code_direct()
tracing: Fix comment to use tracing_on over tracing_enable
metag: ftrace: Fix the comments for ftrace_modify_code
sh: ftrace: Fix the comments for ftrace_modify_code()
ia64: ftrace: Fix the comments for ftrace_modify_code()
ftrace: Clean up ftrace_module_init() code
ftrace: Join functions ftrace_module_init() and ftrace_init_module()
tracing: Introduce TRACE_EVENT_FN_COND macro
tracing: Use seq_buf_used() in seq_buf_to_user() instead of len
bpf: Constify bpf_verifier_ops structure
ftrace: Have ftrace_ops_get_func() handle RCU and PER_CPU flags too
ftrace: Remove use of control list and ops
ftrace: Fix output of enabled_functions for showing tramp
ftrace: Fix a typo in comment
ftrace: Show all tramps registered to a record on ftrace_bug()
ftrace: Add variable ftrace_expected for archs to show expected code
ftrace: Add new type to distinguish what kind of ftrace_bug()
tracing: Update cond flag when enabling or disabling a trigger
...
Currently perf has its own list function within the ftrace infrastructure
that seems to be used only to allow for it to have per-cpu disabling as well
as a check to make sure that it's not called while RCU is not watching. It
uses something called the "control_ops" which is used to iterate over ops
under it with the control_list_func().
The problem is that this control_ops and control_list_func unnecessarily
complicates the code. By replacing FTRACE_OPS_FL_CONTROL with two new flags
(FTRACE_OPS_FL_RCU and FTRACE_OPS_FL_PER_CPU) we can remove all the code
that is special with the control ops and add the needed checks within the
generic ftrace_list_func().
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There were still a number of references to my old Red Hat email
address in the kernel source. Remove these while keeping the
Red Hat copyright notices intact.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The name "ftrace" really refers to the function hook infrastructure. It
is not about the trace_events. The structures ftrace_event_call and
ftrace_event_class have nothing to do with the function hooks, and are
really trace_event structures. Rename ftrace_event_* to trace_event_*.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Both Linus (most recent) and Steve (a while ago) reported that perf
related callbacks have massive stack bloat.
The problem is that software events need a pt_regs in order to
properly report the event location and unwind stack. And because we
could not assume one was present we allocated one on stack and filled
it with minimal bits required for operation.
Now, pt_regs is quite large, so this is undesirable. Furthermore it
turns out that most sites actually have a pt_regs pointer available,
making this even more onerous, as the stack space is pointless waste.
This patch addresses the problem by observing that software events
have well defined nesting semantics, therefore we can use static
per-cpu storage instead of on-stack.
Linus made the further observation that all but the scheduler callers
of perf_sw_event() have a pt_regs available, so we change the regular
perf_sw_event() to require a valid pt_regs (where it used to be
optional) and add perf_sw_event_sched() for the scheduler.
We have a scheduler specific call instead of a more generic _noregs()
like construct because we can assume non-recursion from the scheduler
and thereby simplify the code further (_noregs would have to put the
recursion context call inline in order to assertain which __perf_regs
element to use).
One last note on the implementation of perf_trace_buf_prepare(); we
allow .regs = NULL for those cases where we already have a pt_regs
pointer available and do not need another.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Javi Merino <javi.merino@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Link: http://lkml.kernel.org/r/20141216115041.GW3337@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There's no need to check cloned event's permission once the
parent was already checked.
Also the code is checking 'current' process permissions, which
is not owner process for cloned events, thus could end up with
wrong permission check result.
Reported-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Tested-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1405079782-8139-1-git-send-email-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use NOKPROBE_SYMBOL macro to protect functions from
kprobes instead of __kprobes annotation in ftrace.
This applies nokprobe_inline annotation for some cases,
because NOKPROBE_SYMBOL() will inhibit inlining by
referring the symbol address.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20140417081828.26341.55152.stgit@ltc230.yrl.intra.hitachi.co.jp
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Recent issues with user space callchains processing within
page fault handler tracing showed as Peter said 'there's
just too much fail surface'.
The user space stack dump is just another source of the this issue.
Related list discussions:
http://marc.info/?t=139302086500001&r=1&w=2http://marc.info/?t=139301437300003&r=1&w=2
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1393775800-13524-3-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Recent issues with user space callchains processing within
page fault handler tracing showed as Peter said 'there's
just too much fail surface'.
Related list discussions:
http://marc.info/?t=139302086500001&r=1&w=2http://marc.info/?t=139301437300003&r=1&w=2
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1393775800-13524-2-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The 64-bit attr.config value for perf trace events was being copied into
an "int" before doing a comparison, meaning the top 32 bits were
being truncated.
As far as I can tell this didn't cause any errors, but it did mean
it was possible to create valid aliases for all the tracepoint ids
which I don't think was intended. (For example, 0xffffffff00000018
and 0x18 both enable the same tracepoint).
Signed-off-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1311151236100.11932@vincent-weaver-1.um.maine.edu
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Vince's perf-trinity fuzzer found yet another 'interesting' problem.
When we sample the irq_work_exit tracepoint with period==1 (or
PERF_SAMPLE_PERIOD) and we add an fasync SIGNAL handler we create an
infinite event generation loop:
,-> <IPI>
| irq_work_exit() ->
| trace_irq_work_exit() ->
| ...
| __perf_event_overflow() -> (due to fasync)
| irq_work_queue() -> (irq_work_list must be empty)
'--------- arch_irq_work_raise()
Similar things can happen due to regular poll() wakeups if we exceed
the ring-buffer wakeup watermark, or have an event_limit.
To avoid this, dis-allow sampling this particular tracepoint.
In order to achieve this, create a special perf_perm function pointer
for each event and call this (when set) on trying to create a
tracepoint perf event.
[ roasted: use expr... to allow for ',' in your expression ]
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Dave Jones <davej@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20131114152304.GC5364@laptop.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The current default perf paranoid level is "1" which has
"perf_paranoid_kernel()" return false, and giving any operations that
use it, access to normal users. Unfortunately, this includes function
tracing and normal users should not be allowed to enable function
tracing by default.
The proper level is defined at "-1" (full perf access), which
"perf_paranoid_tracepoint_raw()" will only give access to. Use that
check instead for enabling function tracing.
Reported-by: Dave Jones <davej@redhat.com>
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: stable@vger.kernel.org # 3.4+
CVE: CVE-2013-2930
Fixes: ced39002f5 ("ftrace, perf: Add support to use function tracepoint in perf")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Every perf_trace_buf_prepare() caller does
WARN_ONCE(size > PERF_MAX_TRACE_SIZE, message) and "message" is
almost the same.
Shift this WARN_ONCE() into perf_trace_buf_prepare(). This changes
the meaning of _ONCE, but I think this is fine.
- 4947014 2932448 10104832 17984294 1126b26 vmlinux
+ 4948422 2932448 10104832 17985702 11270a6 vmlinux
on my build.
Link: http://lkml.kernel.org/r/20130617170211.GA19813@redhat.com
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
perf_trace_buf_prepare() + perf_trace_buf_submit(head, task => NULL)
make no sense if hlist_empty(head). Change perf_ftrace_function_call()
to check event_function.perf_events beforehand.
Link: http://lkml.kernel.org/r/20130617170204.GA19803@redhat.com
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
. Fix include order for bison/flex-generated C files, from Ben Hutchings
. Build fixes and documentation corrections from David Ahern
. Group parsing support, from Jiri Olsa
. UI/gtk refactorings and improvements from Namhyung Kim
. NULL deref fix for perf script, from Namhyung Kim
. Assorted cleanups from Robert Richter
. Let O= makes handle relative paths, from Steven Rostedt
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=0a2X
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
* Fix include order for bison/flex-generated C files, from Ben Hutchings
* Build fixes and documentation corrections from David Ahern
* Group parsing support, from Jiri Olsa
* UI/gtk refactorings and improvements from Namhyung Kim
* NULL deref fix for perf script, from Namhyung Kim
* Assorted cleanups from Robert Richter
* Let O= makes handle relative paths, from Steven Rostedt
* perf script python fixes, from Feng Tang.
* Improve 'perf lock' error message when the needed tracepoints
are not present, from David Ahern.
* Initial bash completion support, from Frederic Weisbecker
* Allow building without libelf, from Namhyung Kim.
* Support DWARF CFI based unwind to have callchains when %bp
based unwinding is not possible, from Jiri Olsa.
* Symbol resolution fixes, while fixing support PPC64 files with an .opt ELF
section was the end goal, several fixes for code that handles all
architectures and cleanups are included, from Cody Schafer.
* Add a description for the JIT interface, from Andi Kleen.
* Assorted fixes for Documentation and build in 32 bit, from Robert Richter
* Add support for non-tracepoint events in perf script python, from Feng Tang
* Cache the libtraceevent event_format associated to each evsel early, so that we
avoid relookups, i.e. calling pevent_find_event repeatedly when processing
tracepoint events.
[ This is to reduce the surface contact with libtraceevents and make clear what
is that the perf tools needs from that lib: so far parsing the common and per
event fields. ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A few events are interesting not only for a current task.
For example, sched_stat_* events are interesting for a task
which wakes up. For this reason, it will be good if such
events will be delivered to a target task too.
Now a target task can be set by using __perf_task().
The original idea and a draft patch belongs to Peter Zijlstra.
I need these events for profiling sleep times. sched_switch is used for
getting callchains and sched_stat_* is used for getting time periods.
These events are combined in user space, then it can be analyzed by
perf tools.
Inspired-by: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arun Sharma <asharma@fb.com>
Signed-off-by: Andrew Vagin <avagin@openvz.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1342016098-213063-1-git-send-email-avagin@openvz.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Return as the 4th paramater to the function tracer callback the pt_regs.
Later patches that implement regs passing for the architectures will require
having the ftrace_ops set the SAVE_REGS flag, which will tell the arch
to take the time to pass a full set of pt_regs to the ftrace_ops callback
function. If the arch does not support it then it should pass NULL.
If an arch can pass full regs, then it should define:
ARCH_SUPPORTS_FTRACE_SAVE_REGS to 1
Link: http://lkml.kernel.org/r/20120702201821.019966811@goodmis.org
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently the function trace callback receives only the ip and parent_ip
of the function that it traced. It would be more powerful to also return
the ops that registered the function as well. This allows the same function
to act differently depending on what ftrace_ops registered it.
Link: http://lkml.kernel.org/r/20120612225424.267254552@goodmis.org
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Adding support to filter function trace event via perf
interface. It is now possible to use filter interface
in the perf tool like:
perf record -e ftrace:function --filter="(ip == mm_*)" ls
The filter syntax is restricted to the the 'ip' field only,
and following operators are accepted '==' '!=' '||', ending
up with the filter strings like:
ip == f1[, ]f2 ... || ip != f3[, ]f4 ...
with comma ',' or space ' ' as a function separator. If the
space ' ' is used as a separator, the right side of the
assignment needs to be enclosed in double quotes '"', e.g.:
perf record -e ftrace:function --filter '(ip == do_execve,sys_*,ext*)' ls
perf record -e ftrace:function --filter '(ip == "do_execve,sys_*,ext*")' ls
perf record -e ftrace:function --filter '(ip == "do_execve sys_* ext*")' ls
The '==' operator adds trace filter with same effect as would
be added via set_ftrace_filter file.
The '!=' operator adds trace filter with same effect as would
be added via set_ftrace_notrace file.
The right side of the '!=', '==' operators is list of functions
or regexp. to be added to filter separated by space.
The '||' operator is used for connecting multiple filter definitions
together. It is possible to have more than one '==' and '!='
operators within one filter string.
Link: http://lkml.kernel.org/r/1329317514-8131-8-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Adding perf registration support for the ftrace function event,
so it is now possible to register it via perf interface.
The perf_event struct statically contains ftrace_ops as a handle
for function tracer. The function tracer is registered/unregistered
in open/close actions.
To be efficient, we enable/disable ftrace_ops each time the traced
process is scheduled in/out (via TRACE_REG_PERF_(ADD|DELL) handlers).
This way tracing is enabled only when the process is running.
Intentionally using this way instead of the event's hw state
PERF_HES_STOPPED, which would not disable the ftrace_ops.
It is now possible to use function trace within perf commands
like:
perf record -e ftrace:function ls
perf stat -e ftrace:function ls
Allowed only for root.
Link: http://lkml.kernel.org/r/1329317514-8131-6-git-send-email-jolsa@redhat.com
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Adding TRACE_REG_PERF_ADD and TRACE_REG_PERF_DEL to handle
perf event schedule in/out actions.
The add action is invoked for when the perf event is scheduled in,
while the del action is invoked when the event is scheduled out.
Link: http://lkml.kernel.org/r/1329317514-8131-4-git-send-email-jolsa@redhat.com
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
