The method struct pci_error_handlers.error_detected() is defined and
documented as taking an 'enum pci_channel_state' for the second argument,
but most drivers use 'pci_channel_state_t' instead.
This 'pci_channel_state_t' is not a typedef for the enum but a typedef for
a bitwise type in order to have better/stricter typechecking.
Consolidate everything by using 'pci_channel_state_t' in the method's
definition, in the related helpers and in the drivers.
Enforce use of 'pci_channel_state_t' by replacing 'enum pci_channel_state'
with an anonymous 'enum'.
Note: Currently, from a typechecking point of view this patch changes
nothing because only the constants defined by the enum are bitwise, not the
enum itself (sparse doesn't have the notion of 'bitwise enum'). This may
change in some not too far future, hence the patch.
[bhelgaas: squash in
https://lore.kernel.org/r/20200702162651.49526-3-luc.vanoostenryck@gmail.comhttps://lore.kernel.org/r/20200702162651.49526-4-luc.vanoostenryck@gmail.com]
Link: https://lore.kernel.org/r/20200702162651.49526-2-luc.vanoostenryck@gmail.com
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The pci_cfg_wait queue is used to prevent user-space config accesses to
devices while they are recovering from reset.
Previously we used these operations on pci_cfg_wait:
__add_wait_queue(&pci_cfg_wait, ...)
__remove_wait_queue(&pci_cfg_wait, ...)
wake_up_all(&pci_cfg_wait)
The wake_up acquires the wait queue lock, but the add and remove do not.
Originally these were all protected by the pci_lock, but cdcb33f982
("PCI: Avoid possible deadlock on pci_lock and p->pi_lock"), moved
wake_up_all() outside pci_lock, so it could race with add/remove
operations, which caused occasional kernel panics, e.g., during vfio-pci
hotplug/unplug testing:
Unable to handle kernel read from unreadable memory at virtual address ffff802dac469000
Resolve this by using wait_event() instead of __add_wait_queue() and
__remove_wait_queue(). The wait queue lock is held by both wait_event()
and wake_up_all(), so it provides mutual exclusion.
Fixes: cdcb33f982 ("PCI: Avoid possible deadlock on pci_lock and p->pi_lock")
Link: https://lore.kernel.org/linux-pci/79827f2f-9b43-4411-1376-b9063b67aee3@huawei.com/T/#u
Based-on: https://lore.kernel.org/linux-pci/20191210031527.40136-1-zhengxiang9@huawei.com/
Based-on-patch-by: Xiang Zheng <zhengxiang9@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Xiang Zheng <zhengxiang9@huawei.com>
Cc: Heyi Guo <guoheyi@huawei.com>
Cc: Biaoxiang Ye <yebiaoxiang@huawei.com>
Lots of define are actually already defined in pci_regs.h, directly use
the standard defines.
Link: https://lore.kernel.org/r/20200615210608.21469-13-ansuelsmth@gmail.com
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Some SoC based on ipq8064/5 needs to be limited to pci GEN1 speed due to
some hardware limitations. Add support for speed setting defined by the
max-link-speed binding. If not defined the max speed is set to GEN2 by
default.
Link: https://lore.kernel.org/r/20200615210608.21469-12-ansuelsmth@gmail.com
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Ipq8064-v2 have tx term offset set to 0. Introduce this variant to permit
different offset based on the revision.
Link: https://lore.kernel.org/r/20200615210608.21469-10-ansuelsmth@gmail.com
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Add tx term offset support to pcie qcom driver need in some revision of
the ipq806x SoC. Ipq8064 needs tx term offset set to 7.
Link: https://lore.kernel.org/r/20200615210608.21469-9-ansuelsmth@gmail.com
Fixes: 82a823833f ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: stable@vger.kernel.org # v4.5+
Set some specific value for Tx De-Emphasis, Tx Swing and Rx equalization
needed on some ipq8064 based device (Netgear R7800 for example). Without
this the system locks on kernel load.
Link: https://lore.kernel.org/r/20200615210608.21469-8-ansuelsmth@gmail.com
Fixes: 82a823833f ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: stable@vger.kernel.org # v4.5+
Rework 2.1.0 revision to use bulk clk api and fix missing assert on
reset_control_deassert error.
Link: https://lore.kernel.org/r/20200615210608.21469-7-ansuelsmth@gmail.com
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
The deinit issues reset_control_assert for PCI twice and does not contain
phy reset.
Link: https://lore.kernel.org/r/20200615210608.21469-4-ansuelsmth@gmail.com
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Aux and Ref clk are missing in PCIe qcom driver. Add support for this
optional clks for ipq8064/apq8064 SoC.
Link: https://lore.kernel.org/r/20200615210608.21469-2-ansuelsmth@gmail.com
Fixes: 82a823833f ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Most callers of config read do not check for return value. But most of the
ones that do, checks for error indication in 'val' variable.
This patch updates error handling in advk_pcie_rd_conf() function. If PIO
transfer fails then 'val' variable is set to 0xffffffff which indicates
failture.
Link: https://lore.kernel.org/r/20200528162604.GA323482@bjorn-Precision-5520
Link: https://lore.kernel.org/r/20200601130315.18895-1-pali@kernel.org
Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
When debugging an issue where I was asking the PCI machinery to enable a
set of MSI-X vectors, without falling back on MSI, I ran across a behaviour
which seems odd. The pci_alloc_irq_vectors_affinity() will always return
-ENOSPC on failure, when allocating MSI-X vectors only, whereas with MSI
fallback it will forward any error returned by __pci_enable_msi_range().
This is a confusing behaviour, so have the pci_alloc_irq_vectors_affinity()
forward the error code from __pci_enable_msix_range() when appropriate.
Link: https://lore.kernel.org/r/20200616073318.20229-1-piotr.stankiewicz@intel.com
Signed-off-by: Piotr Stankiewicz <piotr.stankiewicz@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The lkml.org, spinics.net, and gmane.org archives are not very reliable
and, in some cases, not even easily accessible. Replace links to them with
links to lore.kernel.org, the archives hosted by kernel.org.
I found the gmane items via the Wayback Machine archive at
https://web.archive.org/.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Replace http:// links with https:// links. This reduces the likelihood of
man-in-the-middle attacks when developers open these links.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
[bhelgaas: also update samsung.com links, drop sourceforge link]
Link: https://lore.kernel.org/r/20200627103050.71712-1-grandmaster@al2klimov.de
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The PCI config accessors (pci_read_config_word(), et al) return
PCIBIOS_SUCCESSFUL (zero) or positive error values like
PCIBIOS_FUNC_NOT_SUPPORTED.
The PCIe capability accessors similarly return PCIBIOS errors, but in
addition, they can return -EINVAL. This makes it harder than it should be
to check for errors.
Return PCIBIOS_BAD_REGISTER_NUMBER instead of -EINVAL in all PCIe
capability accessors.
Suggested-by: Bjorn Helgaas <bjorn@helgaas.com>
Link: https://lore.kernel.org/r/20200615073225.24061-9-refactormyself@gmail.com
Signed-off-by: Bolarinwa Olayemi Saheed <refactormyself@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The PCI config accessors (pci_read_config_word(), et al) return
PCIBIOS_SUCCESSFUL (zero) or positive error values like
PCIBIOS_FUNC_NOT_SUPPORTED.
The PCIe capability accessors (pcie_capability_read_word(), et al)
similarly return PCIBIOS errors, but some callers assume they return
generic errno values like -EINVAL.
For example, the Myri-10G probe function returns a positive PCIBIOS error
if the pcie_capability_clear_and_set_word() in pcie_set_readrq() fails:
myri10ge_probe
status = pcie_set_readrq
return pcie_capability_clear_and_set_word
if (status)
return status
A positive return from a PCI driver probe function would cause a "Driver
probe function unexpectedly returned" warning from local_pci_probe()
instead of the desired probe failure.
Convert PCIBIOS errors to generic errno for all callers of:
pcie_capability_read_word
pcie_capability_read_dword
pcie_capability_write_word
pcie_capability_write_dword
pcie_capability_set_word
pcie_capability_set_dword
pcie_capability_clear_word
pcie_capability_clear_dword
pcie_capability_clear_and_set_word
pcie_capability_clear_and_set_dword
that check the return code for anything other than zero.
[bhelgaas: commit log, squash together]
Suggested-by: Bjorn Helgaas <bjorn@helgaas.com>
Link: https://lore.kernel.org/r/20200615073225.24061-1-refactormyself@gmail.com
Signed-off-by: Bolarinwa Olayemi Saheed <refactormyself@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
- fix build rules in binderfs sample
- fix build errors when Kbuild recurses to the top Makefile
- covert '---help---' in Kconfig to 'help'
-----BEGIN PGP SIGNATURE-----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=1NIT
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix build rules in binderfs sample
- fix build errors when Kbuild recurses to the top Makefile
- covert '---help---' in Kconfig to 'help'
* tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
treewide: replace '---help---' in Kconfig files with 'help'
kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables
samples: binderfs: really compile this sample and fix build issues
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCXuMTgwAKCRCAXGG7T9hj
vmX0AQCR8jeUkcc3+TDDuCugfH1AsyIRWavSEP/slqnEVuPhiwEA/324aID1v28U
CEsA7Iksf4nDGLEaC5I5Exshd15gQgY=
=W5nI
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.8b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- several smaller cleanups
- a fix for a Xen guest regression with CPU offlining
- a small fix in the xen pvcalls backend driver
- an update of MAINTAINERS
* tag 'for-linus-5.8b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
MAINTAINERS: Update PARAVIRT_OPS_INTERFACE and VMWARE_HYPERVISOR_INTERFACE
xen/pci: Get rid of verbose_request and use dev_dbg() instead
xenbus: Use dev_printk() when possible
xen-pciback: Use dev_printk() when possible
xen: enable BALLOON_MEMORY_HOTPLUG by default
xen: expand BALLOON_MEMORY_HOTPLUG description
xen/pvcalls: Make pvcalls_back_global static
xen/cpuhotplug: Fix initial CPU offlining for PV(H) guests
xen-platform: Constify dev_pm_ops
xen/pvcalls-back: test for errors when calling backend_connect()
- Add support for multi-function devices in pci code.
- Enable PF-VF linking for architectures using the
pdev->no_vf_scan flag (currently just s390).
- Add reipl from NVMe support.
- Get rid of critical section cleanup in entry.S.
- Refactor PNSO CHSC (perform network subchannel operation) in cio
and qeth.
- QDIO interrupts and error handling fixes and improvements, more
refactoring changes.
- Align ioremap() with generic code.
- Accept requests without the prefetch bit set in vfio-ccw.
- Enable path handling via two new regions in vfio-ccw.
- Other small fixes and improvements all over the code.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl7eVGcACgkQjYWKoQLX
FBhweQgAkicvx31x230rdfG+jQkQkl0UqF99vvWrJHEll77SqadfjzKAGIjUB+K0
EoeHVD5Wcj7BogDGcyHeQ0bZpu4WzE+y1nmnrsvu7TEEvcBmkJH0rF2jF+y0sb/O
3qvwFkX/CB5OqaMzKC/AEeRpcCKR+ZUXkWu1irbYth7CBXaycD9EAPc4cj8CfYGZ
r5njUdYOVk77TaO4aV+t5pCYc5TCRJaWXSsWaAv/nuLcIqsFBYOy2q+L47zITGXp
utZVanIDjzx+ikpaKicOIfC3hJsRuNX9MnlZKsQFwpVEZAUZmIUm29XdhGJTWSxU
RV7m1ORINbFP1nGAqWqkOvGo/LC0ZA==
=VhXR
-----END PGP SIGNATURE-----
Merge tag 's390-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Add support for multi-function devices in pci code.
- Enable PF-VF linking for architectures using the pdev->no_vf_scan
flag (currently just s390).
- Add reipl from NVMe support.
- Get rid of critical section cleanup in entry.S.
- Refactor PNSO CHSC (perform network subchannel operation) in cio and
qeth.
- QDIO interrupts and error handling fixes and improvements, more
refactoring changes.
- Align ioremap() with generic code.
- Accept requests without the prefetch bit set in vfio-ccw.
- Enable path handling via two new regions in vfio-ccw.
- Other small fixes and improvements all over the code.
* tag 's390-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (52 commits)
vfio-ccw: make vfio_ccw_regops variables declarations static
vfio-ccw: Add trace for CRW event
vfio-ccw: Wire up the CRW irq and CRW region
vfio-ccw: Introduce a new CRW region
vfio-ccw: Refactor IRQ handlers
vfio-ccw: Introduce a new schib region
vfio-ccw: Refactor the unregister of the async regions
vfio-ccw: Register a chp_event callback for vfio-ccw
vfio-ccw: Introduce new helper functions to free/destroy regions
vfio-ccw: document possible errors
vfio-ccw: Enable transparent CCW IPL from DASD
s390/pci: Log new handle in clp_disable_fh()
s390/cio, s390/qeth: cleanup PNSO CHSC
s390/qdio: remove q->first_to_kick
s390/qdio: fix up qdio_start_irq() kerneldoc
s390: remove critical section cleanup from entry.S
s390: add machine check SIGP
s390/pci: ioremap() align with generic code
s390/ap: introduce new ap function ap_get_qdev()
Documentation/s390: Update / remove developerWorks web links
...
Including:
- A big part of this is a change in how devices get connected to
IOMMUs in the core code. It contains the change from the old
add_device()/remove_device() to the new
probe_device()/release_device() call-backs. As a result
functionality that was previously in the IOMMU drivers has
been moved to the IOMMU core code, including IOMMU group
allocation for each device.
The reason for this change was to get more robust allocation
of default domains for the iommu groups.
A couple of fixes were necessary after this was merged into
the IOMMU tree, but there are no known bugs left. The last fix
is applied on-top of the merge commit for the topic branches.
- Removal of the driver private domain handling in the Intel
VT-d driver. This was fragile code and I am glad it is gone
now.
- More Intel VT-d updates from Lu Baolu:
- Nested Shared Virtual Addressing (SVA) support to the
Intel VT-d driver
- Replacement of the Intel SVM interfaces to the common
IOMMU SVA API
- SVA Page Request draining support
- ARM-SMMU Updates from Will:
- Avoid mapping reserved MMIO space on SMMUv3, so that
it can be claimed by the PMU driver
- Use xarray to manage ASIDs on SMMUv3
- Reword confusing shutdown message
- DT compatible string updates
- Allow implementations to override the default domain
type
- A new IOMMU driver for the Allwinner Sun50i platform
- Support for ATS gets disabled for untrusted devices (like
Thunderbolt devices). This includes a PCI patch, acked by
Bjorn.
- Some cleanups to the AMD IOMMU driver to make more use of
IOMMU core features.
- Unification of some printk formats in the Intel and AMD IOMMU
drivers and in the IOVA code.
- Updates for DT bindings
- A number of smaller fixes and cleanups.
-----BEGIN PGP SIGNATURE-----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=a4z4
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"A big part of this is a change in how devices get connected to IOMMUs
in the core code. It contains the change from the old add_device() /
remove_device() to the new probe_device() / release_device()
call-backs.
As a result functionality that was previously in the IOMMU drivers has
been moved to the IOMMU core code, including IOMMU group allocation
for each device. The reason for this change was to get more robust
allocation of default domains for the iommu groups.
A couple of fixes were necessary after this was merged into the IOMMU
tree, but there are no known bugs left. The last fix is applied on-top
of the merge commit for the topic branches.
Other than that change, we have:
- Removal of the driver private domain handling in the Intel VT-d
driver. This was fragile code and I am glad it is gone now.
- More Intel VT-d updates from Lu Baolu:
- Nested Shared Virtual Addressing (SVA) support to the Intel VT-d
driver
- Replacement of the Intel SVM interfaces to the common IOMMU SVA
API
- SVA Page Request draining support
- ARM-SMMU Updates from Will:
- Avoid mapping reserved MMIO space on SMMUv3, so that it can be
claimed by the PMU driver
- Use xarray to manage ASIDs on SMMUv3
- Reword confusing shutdown message
- DT compatible string updates
- Allow implementations to override the default domain type
- A new IOMMU driver for the Allwinner Sun50i platform
- Support for ATS gets disabled for untrusted devices (like
Thunderbolt devices). This includes a PCI patch, acked by Bjorn.
- Some cleanups to the AMD IOMMU driver to make more use of IOMMU
core features.
- Unification of some printk formats in the Intel and AMD IOMMU
drivers and in the IOVA code.
- Updates for DT bindings
- A number of smaller fixes and cleanups.
* tag 'iommu-updates-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (109 commits)
iommu: Check for deferred attach in iommu_group_do_dma_attach()
iommu/amd: Remove redundant devid checks
iommu/amd: Store dev_data as device iommu private data
iommu/amd: Merge private header files
iommu/amd: Remove PD_DMA_OPS_MASK
iommu/amd: Consolidate domain allocation/freeing
iommu/amd: Free page-table in protection_domain_free()
iommu/amd: Allocate page-table in protection_domain_init()
iommu/amd: Let free_pagetable() not rely on domain->pt_root
iommu/amd: Unexport get_dev_data()
iommu/vt-d: Fix compile warning
iommu/vt-d: Remove real DMA lookup in find_domain
iommu/vt-d: Allocate domain info for real DMA sub-devices
iommu/vt-d: Only clear real DMA device's context entries
iommu: Remove iommu_sva_ops::mm_exit()
uacce: Remove mm_exit() op
iommu/sun50i: Constify sun50i_iommu_ops
iommu/hyper-v: Constify hyperv_ir_domain_ops
iommu/vt-d: Use pci_ats_supported()
iommu/arm-smmu-v3: Use pci_ats_supported()
...
- Fix conflicts in pci-bridge-emul descriptions of Device Status and Slot
Control (Jon Derrick)
- Add emulation for more Device Status, Link Control, and Slot Control
bits (Jon Derrick)
- Improve emulation of reserved bits (Jon Derrick)
* remotes/lorenzo/pci/pci-bridge-emul:
PCI: pci-bridge-emul: Eliminate the 'reserved' member
PCI: pci-bridge-emul: Update for PCIe 5.0 r1.0
PCI: pci-bridge-emul: Fix Root Cap/Status comment
PCI: pci-bridge-emul: Fix PCIe bit conflicts
- Release resource in probe failure path (Wei Hu)
- Retry PCI bus D0 entry if device state is invalid (Wei Hu)
- Use struct_size() to help avoid type mistakes (Gustavo A. R. Silva)
* remotes/lorenzo/pci/hv:
PCI: hv: Use struct_size() helper
PCI: hv: Retry PCI bus D0 entry on invalid device state
PCI: hv: Fix the PCI HyperV probe failure path to release resource properly
- Constify struct pci_ecam_ops (Rob Herring)
- Support building as modules (Rob Herring)
- Eliminate wrappers for pci_host_common_probe() by using DT match table
data (Rob Herring)
* remotes/lorenzo/pci/host-generic:
PCI: host-generic: Eliminate pci_host_common_probe wrappers
PCI: host-generic: Support building as modules
PCI: Constify struct pci_ecam_ops
# Conflicts:
# drivers/pci/controller/dwc/pcie-hisi.c
- Deprecate 'cdns,max-outbound-regions' and 'cdns,no-bar-match-nbits'
bindings in favor of deriving them from 'ranges' and 'dma-ranges'
(Kishon Vijay Abraham I)
- Read Vendor and Device ID as 32 bits (not 16) from DT (Kishon Vijay
Abraham I)
* remotes/lorenzo/pci/cadence:
PCI: cadence: Fix to read 32-bit Vendor ID/Device ID property from DT
PCI: cadence: Remove "cdns,max-outbound-regions" DT property
dt-bindings: PCI: cadence: Deprecate inbound/outbound specific bindings
- Train link immediately after enabling link training to avoid issues
with Compex WLE900VX and Turris MOX devices (Pali Rohár)
- Remove ASPM config and let the PCI core do it (Pali Rohár)
- Interpret zero 'max-link-speed' value as invalid (Pali Rohár)
- Respect the 'max-link-speed' property and improve link training (Marek
Behún)
- Issue PERST via GPIO (Pali Rohár)
- Add PHY support (Marek Behún)
- Use standard PCIe capability macros (Pali Rohár)
- Document new 'max-link-speed', 'phys', and 'reset-gpios' properties
(Marek Behún)
* remotes/lorenzo/pci/aardvark:
dt-bindings: PCI: aardvark: Describe new properties
PCI: aardvark: Replace custom macros by standard linux/pci_regs.h macros
PCI: aardvark: Add PHY support
PCI: aardvark: Add FIXME comment for PCIE_CORE_CMD_STATUS_REG access
PCI: aardvark: Issue PERST via GPIO
PCI: aardvark: Improve link training
PCI: of: Zero max-link-speed value is invalid
PCI: aardvark: Don't blindly enable ASPM L0s and don't write to read-only register
PCI: aardvark: Train link immediately after enabling training
- Check .bridge_d3() hook for NULL before calling it (Bjorn Helgaas)
- Disable PME# for Pericom OHCI/UHCI USB controllers because it's
not reliably asserted on USB hotplug (Kai-Heng Feng)
- Assume ports without DLL Link Active train links in 100 ms to work
around Thunderbolt bridge defects (Mika Westerberg)
* pci/pm:
PCI/PM: Assume ports without DLL Link Active train links in 100 ms
PCI/PM: Adjust pcie_wait_for_link_delay() for caller delay
PCI: Avoid Pericom USB controller OHCI/EHCI PME# defect
serial: 8250_pci: Move Pericom IDs to pci_ids.h
PCI/PM: Call .bridge_d3() hook only if non-NULL
- Add AMD Zen Raven and Renoir Root Ports to P2PDMA whitelist (Alex
Deucher)
* pci/p2pdma:
PCI/P2PDMA: Add AMD Zen Raven and Renoir Root Ports to whitelist
- Clarify that platform_get_irq() should never return 0 (Bjorn Helgaas)
- Check for platform_get_irq() failure consistently (Bjorn Helgaas)
- Replace zero-length array with flexible-array (Gustavo A. R. Silva)
- Unify pcie_find_root_port() and pci_find_pcie_root_port() (Yicong Yang)
- Quirk Intel C620 MROMs, which have non-BARs in BAR locations (Xiaochun
Lee)
- Fix pcie_pme_resume() and pcie_pme_remove() kernel-doc (Jay Fang)
- Rename _DSM constants to align with spec (Krzysztof Wilczyński)
* pci/misc:
PCI: Rename _DSM constants to align with spec
PCI/PME: Fix kernel-doc of pcie_pme_resume() and pcie_pme_remove()
x86/PCI: Mark Intel C620 MROMs as having non-compliant BARs
PCI: Unify pcie_find_root_port() and pci_find_pcie_root_port()
PCI: Replace zero-length array with flexible-array
PCI: Check for platform_get_irq() failure consistently
driver core: platform: Clarify that IRQ 0 is invalid
- Remove unused pciehp EMI() and HP_SUPR_RM() macros (Ani Sinha)
- Use of_node_name_eq() for node name comparisons (Rob Herring)
- Convert shpchp_unconfigure_device() to void (Krzysztof Wilczynski)
* pci/hotplug:
PCI: shpchp: Make shpchp_unconfigure_device() void
PCI: Use of_node_name_eq() for node name comparisons
PCI: pciehp: Remove unused EMI() and HP_SUPR_RM() macros
- Log only ACPI_NOTIFY_DISCONNECT_RECOVER events for EDR, not all ACPI
SYSTEM-level events (Kuppuswamy Sathyanarayanan)
- Rely only on _OSC (not _OSC + HEST FIRMWARE_FIRST) to negotiate AER
Capability ownership (Alexandru Gagniuc)
- Remove HEST/FIRMWARE_FIRST parsing that was previously used to help
intuit AER Capability ownership (Kuppuswamy Sathyanarayanan)
- Remove redundant pci_is_pcie() and dev->aer_cap checks (Kuppuswamy
Sathyanarayanan)
- Print IRQ number used by DPC (Yicong Yang)
* pci/error:
PCI/DPC: Print IRQ number used by port
PCI/AER: Use "aer" variable for capability offset
PCI/AER: Remove redundant dev->aer_cap checks
PCI/AER: Remove redundant pci_is_pcie() checks
PCI/AER: Remove HEST/FIRMWARE_FIRST parsing for AER ownership
PCI/AER: Use only _OSC to determine AER ownership
PCI/EDR: Log only ACPI_NOTIFY_DISCONNECT_RECOVER events
Add driver for the Socionext UniPhier Pro5 SoC endpoint controller.
This controller is based on the DesignWare PCIe core.
And add "host" to existing controller descriontions for the host controller
in Kconfig.
Link: https://lore.kernel.org/r/1589457801-12796-3-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAl7WhbkTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXlUnB/0R8dBVSeRfNmyJaadBWKFc/LffwKLD
CQ8PVv22ffkCaEYV2tpnhS6NmkERLNdson4Uo02tVUsjOJ4CrWHTn7aKqYWZyA+O
qv/PiD9TBXJVYMVP2kkyaJlK5KoqeAWBr2kM16tT0cxQmlhE7g0Xo2wU9vhRbU+4
i4F0jffe4lWps65TK392CsPr6UEv1HSel191Py5zLzYqChT+L8WfahmBt3chhsV5
TIUJYQvBwxecFRla7yo+4sUn37ZfcTqD1hCWSr0zs4psW0ge7d80kuaNZS+EqxND
fGm3Bp1BlUuDKsJ/D+AaHLCR47PUZ9t9iMDjZS/ovYglLFwi+h3tAV+W
=LwVR
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyper-v updates from Wei Liu:
- a series from Andrea to support channel reassignment
- a series from Vitaly to clean up Vmbus message handling
- a series from Michael to clean up and augment hyperv-tlfs.h
- patches from Andy to clean up GUID usage in Hyper-V code
- a few other misc patches
* tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (29 commits)
Drivers: hv: vmbus: Resolve more races involving init_vp_index()
Drivers: hv: vmbus: Resolve race between init_vp_index() and CPU hotplug
vmbus: Replace zero-length array with flexible-array
Driver: hv: vmbus: drop a no long applicable comment
hyper-v: Switch to use UUID types directly
hyper-v: Replace open-coded variant of %*phN specifier
hyper-v: Supply GUID pointer to printf() like functions
hyper-v: Use UUID API for exporting the GUID (part 2)
asm-generic/hyperv: Add definitions for Get/SetVpRegister hypercalls
x86/hyperv: Split hyperv-tlfs.h into arch dependent and independent files
x86/hyperv: Remove HV_PROCESSOR_POWER_STATE #defines
KVM: x86: hyperv: Remove duplicate definitions of Reference TSC Page
drivers: hv: remove redundant assignment to pointer primary_channel
scsi: storvsc: Re-init stor_chns when a channel interrupt is re-assigned
Drivers: hv: vmbus: Introduce the CHANNELMSG_MODIFYCHANNEL message type
Drivers: hv: vmbus: Synchronize init_vp_index() vs. CPU hotplug
Drivers: hv: vmbus: Remove the unused HV_LOCALIZED channel affinity logic
PCI: hv: Prepare hv_compose_msi_msg() for the VMBus-channel-interrupt-to-vCPU reassignment functionality
Drivers: hv: vmbus: Use a spin lock for synchronizing channel scheduling vs. channel removal
hv_utils: Always execute the fcopy and vss callbacks in a tasklet
...
- added support for MIPSr5 and P5600 cores
- converted Loongson PCI driver into a PCI host driver using the generic
PCI framework
- added emulation of CPUCFG command for Loogonson64 cpus
- removed of LASAT, PMC MSP71xx and NEC MARKEINS/EMMA
- ioremap cleanup
- fix for a race between two threads faulting the same page
- various cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=eAtN
-----END PGP SIGNATURE-----
Merge tag 'mips_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- added support for MIPSr5 and P5600 cores
- converted Loongson PCI driver into a PCI host driver using the
generic PCI framework
- added emulation of CPUCFG command for Loogonson64 cpus
- removed of LASAT, PMC MSP71xx and NEC MARKEINS/EMMA
- ioremap cleanup
- fix for a race between two threads faulting the same page
- various cleanups and fixes
* tag 'mips_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (143 commits)
MIPS: ralink: drop ralink_clk_init for mt7621
MIPS: ralink: bootrom: mark a function as __init to save some memory
MIPS: Loongson64: Reorder CPUCFG model match arms
MIPS: Expose Loongson CPUCFG availability via HWCAP
MIPS: Loongson64: Guard against future cores without CPUCFG
MIPS: Fix build warning about "PTR_STR" redefinition
MIPS: Loongson64: Remove not used pci.c
MIPS: Loongson64: Define PCI_IOBASE
MIPS: CPU_LOONGSON2EF need software to maintain cache consistency
MIPS: DTS: Fix build errors used with various configs
MIPS: Loongson64: select NO_EXCEPT_FILL
MIPS: Fix IRQ tracing when call handle_fpe() and handle_msa_fpe()
MIPS: mm: add page valid judgement in function pte_modify
mm/memory.c: Add memory read privilege on page fault handling
mm/memory.c: Update local TLB if PTE entry exists
MIPS: Do not flush tlb page when updating PTE entry
MIPS: ingenic: Default to a generic board
MIPS: ingenic: Add support for GCW Zero prototype
MIPS: ingenic: DTS: Add memory info of GCW Zero
MIPS: Loongson64: Switch to generic PCI driver
...
- Update the ACPICA code in the kernel to upstream revision
20200430:
* Move acpi_gbl_next_cmd_num definition (Erik Kaneda).
* Ignore AE_ALREADY_EXISTS status in the disassembler when parsing
create operators (Erik Kaneda).
* Add status checks to the dispatcher (Erik Kaneda).
* Fix required parameters for _NIG and _NIH (Erik Kaneda).
* Make acpi_protocol_lengths static (Yue Haibing).
- Fix ACPI table reference counting errors in several places, mostly
in error code paths (Hanjun Guo).
- Extend the Generic Event Device (GED) driver to support _Exx and
_Lxx handler methods (Ard Biesheuvel).
- Add new acpi_evaluate_reg() helper and modify the ACPI PCI hotplug
code to use it (Hans de Goede).
- Add new DPTF battery participant driver and make the DPFT power
participant driver create more sysfs device attributes (Srinivas
Pandruvada).
- Improve the handling of memory failures in APEI (James Morse).
- Add new blacklist entry for Acer TravelMate 5735Z to the backlight
driver (Paul Menzel).
- Add i2c address for thermal control to the PMIC driver (Mauro
Carvalho Chehab).
- Allow the ACPI processor idle driver to work on platforms with
only one ACPI C-state present (Zhang Rui).
- Fix kobject reference count leaks in error code paths in two
places (Qiushi Wu).
- Delete unused proc filename macros and make some symbols static
(Pascal Terjan, Zheng Zengkai, Zou Wei).
-----BEGIN PGP SIGNATURE-----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=xH3i
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to upstream revision
20200430, fix several reference counting errors related to ACPI
tables, add _Exx / _Lxx support to the GED driver, add a new
acpi_evaluate_reg() helper, add new DPTF battery participant driver
and extend the DPFT power participant driver, improve the handling of
memory failures in the APEI code, add a blacklist entry to the
backlight driver, update the PMIC driver and the processor idle
driver, fix two kobject reference count leaks, and make a few janitory
changes.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20200430:
- Move acpi_gbl_next_cmd_num definition (Erik Kaneda).
- Ignore AE_ALREADY_EXISTS status in the disassembler when parsing
create operators (Erik Kaneda).
- Add status checks to the dispatcher (Erik Kaneda).
- Fix required parameters for _NIG and _NIH (Erik Kaneda).
- Make acpi_protocol_lengths static (Yue Haibing).
- Fix ACPI table reference counting errors in several places, mostly
in error code paths (Hanjun Guo).
- Extend the Generic Event Device (GED) driver to support _Exx and
_Lxx handler methods (Ard Biesheuvel).
- Add new acpi_evaluate_reg() helper and modify the ACPI PCI hotplug
code to use it (Hans de Goede).
- Add new DPTF battery participant driver and make the DPFT power
participant driver create more sysfs device attributes (Srinivas
Pandruvada).
- Improve the handling of memory failures in APEI (James Morse).
- Add new blacklist entry for Acer TravelMate 5735Z to the backlight
driver (Paul Menzel).
- Add i2c address for thermal control to the PMIC driver (Mauro
Carvalho Chehab).
- Allow the ACPI processor idle driver to work on platforms with only
one ACPI C-state present (Zhang Rui).
- Fix kobject reference count leaks in error code paths in two places
(Qiushi Wu).
- Delete unused proc filename macros and make some symbols static
(Pascal Terjan, Zheng Zengkai, Zou Wei)"
* tag 'acpi-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
ACPI: CPPC: Fix reference count leak in acpi_cppc_processor_probe()
ACPI: sysfs: Fix reference count leak in acpi_sysfs_add_hotplug_profile()
ACPI: GED: use correct trigger type field in _Exx / _Lxx handling
ACPI: DPTF: Add battery participant driver
ACPI: DPTF: Additional sysfs attributes for power participant driver
ACPI: video: Use native backlight on Acer TravelMate 5735Z
arm64: acpi: Make apei_claim_sea() synchronise with APEI's irq work
ACPI: APEI: Kick the memory_failure() queue for synchronous errors
mm/memory-failure: Add memory_failure_queue_kick()
ACPI / PMIC: Add i2c address for thermal control
ACPI: GED: add support for _Exx / _Lxx handler methods
ACPI: Delete unused proc filename macros
ACPI: hotplug: PCI: Use the new acpi_evaluate_reg() helper
ACPI: utils: Add acpi_evaluate_reg() helper
ACPI: debug: Make two functions static
ACPI: sleep: Put the FACS table after using it
ACPI: scan: Put SPCR and STAO table after using it
ACPI: EC: Put the ACPI table after using it
ACPI: APEI: Put the HEST table for error path
ACPI: APEI: Put the error record serialization table for error path
...
All Intel platforms guarantee that all root complex implementations must
send transactions up to IOMMU for address translations. Hence for Intel
RCiEP devices, we can assume some ACS-type isolation even without an ACS
capability.
From the Intel VT-d spec, r3.1, sec 3.16 ("Root-Complex Peer to Peer
Considerations"):
When DMA remapping is enabled, peer-to-peer requests through the
Root-Complex must be handled as follows:
- The input address in the request is translated (through first-level,
second-level or nested translation) to a host physical address (HPA).
The address decoding for peer addresses must be done only on the
translated HPA. Hardware implementations are free to further limit
peer-to-peer accesses to specific host physical address regions (or
to completely disallow peer-forwarding of translated requests).
- Since address translation changes the contents (address field) of
the PCI Express Transaction Layer Packet (TLP), for PCI Express
peer-to-peer requests with ECRC, the Root-Complex hardware must use
the new ECRC (re-computed with the translated address) if it
decides to forward the TLP as a peer request.
- Root-ports, and multi-function root-complex integrated endpoints, may
support additional peer-to-peer control features by supporting PCI
Express Access Control Services (ACS) capability. Refer to ACS
capability in PCI Express specifications for details.
Since Linux didn't give special treatment to allow this exception, certain
RCiEP MFD devices were grouped in a single IOMMU group. This doesn't permit
a single device to be assigned to a guest for instance.
In one vendor system: Device 14.x were grouped in a single IOMMU group.
/sys/kernel/iommu_groups/5/devices/0000:00:14.0
/sys/kernel/iommu_groups/5/devices/0000:00:14.2
/sys/kernel/iommu_groups/5/devices/0000:00:14.3
After this patch:
/sys/kernel/iommu_groups/5/devices/0000:00:14.0
/sys/kernel/iommu_groups/5/devices/0000:00:14.2
/sys/kernel/iommu_groups/6/devices/0000:00:14.3 <<< new group
14.0 and 14.2 are integrated devices, but legacy end points, whereas 14.3
was a PCIe-compliant RCiEP.
00:14.3 Network controller: Intel Corporation Device 9df0 (rev 30)
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
This permits assigning this device to a guest VM.
[bhelgaas: drop "Fixes" tag since this doesn't fix a bug in that commit]
Link: https://lore.kernel.org/r/1590699462-7131-1-git-send-email-ashok.raj@intel.com
Tested-by: Darrel Goeddel <dgoeddel@forcepoint.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Cc: stable@vger.kernel.org
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Mark Scott <mscott@forcepoint.com>,
Cc: Romil Sharma <rsharma@forcepoint.com>
Print IRQ number used by DPC port, like AER/PME does. It provides
convenience to track DPC interrupts counts of certain port from
/proc/interrupts.
Link: https://lore.kernel.org/r/1589018214-52752-1-git-send-email-yangyicong@hisilicon.com
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Previously we used "pos" or "aer_pos" for the offset of the AER Capability.
Use "aer" consistently and initialize it the same way everywhere. No
functional change intended.
Link: https://lore.kernel.org/r/20200529230915.GA479883@bjorn-Precision-5520
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Commit c100beb9cc ("PCI/AER: Use only _OSC to determine AER ownership")
removed the use of HEST in determining AER ownership, but the AER driver
still used HEST to verify AER ownership in some of its APIs.
Per the ACPI spec v6.3, sec 18.3.2.4, some HEST table entries contain a
FIRMWARE_FIRST bit, but that bit does not tell us anything about ownership
of the AER capability.
Remove parsing of HEST to look for FIRMWARE_FIRST.
Add pcie_aer_is_native() for the places that need to know whether the OS
owns the AER capability.
[bhelgaas: commit log, reorder patch, remove unused __aer_firmware_first]
Link: https://lore.kernel.org/r/9a37f53a4e6ff4942ff8e18dbb20b00e16c47341.1590534843.git.sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.
Also, call pm_runtime_disable() when pm_runtime_get_sync() returns
an error code.
Link: https://lore.kernel.org/r/20200521024709.2368-1-dinghao.liu@zju.edu.cn
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Versions of VMD with the Host Physical Address shadow register use this
register to calculate the bus address offset needed to do guest
passthrough of the domain. This register shadows the Host Physical
Address registers including the resource type bits. After calculating
the offset, the extra resource type bits lead to the VMD resources being
over-provisioned at the front and under-provisioned at the back.
Example:
pci 10000:80:02.0: reg 0x10: [mem 0xf801fffc-0xf803fffb 64bit]
Expected:
pci 10000:80:02.0: reg 0x10: [mem 0xf8020000-0xf803ffff 64bit]
If other devices are mapped in the over-provisioned front, it could lead
to resource conflict issues with VMD or those devices.
Link: https://lore.kernel.org/r/20200528030240.16024-3-jonathan.derrick@intel.com
Fixes: a1a3017013 ("PCI: vmd: Fix shadow offsets to reflect spec changes")
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Information printed under verbose_request is clearly used for debugging
only. Remove it and use dev_dbg() instead.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/1590719092-8578-1-git-send-email-boris.ostrovsky@oracle.com
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.
Link: https://lore.kernel.org/r/20200521031355.7022-1-dinghao.liu@zju.edu.cn
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Vidya Sagar <vidyas@nvidia.com>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct hv_dr_state {
...
struct hv_pcidev_description func[];
};
struct pci_bus_relations {
...
struct pci_function_description func[];
} __packed;
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
So, replace the following forms:
offsetof(struct hv_dr_state, func) +
(sizeof(struct hv_pcidev_description) *
(relations->device_count))
offsetof(struct pci_bus_relations, func) +
(sizeof(struct pci_function_description) *
(bus_rel->device_count))
with:
struct_size(dr, func, relations->device_count)
and
struct_size(bus_rel, func, bus_rel->device_count)
respectively.
Link: https://lore.kernel.org/r/20200525164319.GA13596@embeddedor
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Rename PCI-related _DSM constants to align them with the PCI Firmware Spec,
r3.2, sec 4.6. No functional change intended.
Link: https://lore.kernel.org/r/20200526213905.2479381-1-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The AMD Starship USB 3.0 host controller advertises Function Level Reset
support, but it apparently doesn't work. Add a quirk to prevent use of FLR
on this device.
Without this quirk, when attempting to assign (pass through) an AMD
Starship USB 3.0 host controller to a guest OS, the system becomes
increasingly unresponsive over the course of several minutes, eventually
requiring a hard reset. Shortly after attempting to start the guest, I see
these messages:
vfio-pci 0000:05:00.3: not ready 1023ms after FLR; waiting
vfio-pci 0000:05:00.3: not ready 2047ms after FLR; waiting
vfio-pci 0000:05:00.3: not ready 4095ms after FLR; waiting
vfio-pci 0000:05:00.3: not ready 8191ms after FLR; waiting
And then eventually:
vfio-pci 0000:05:00.3: not ready 65535ms after FLR; giving up
INFO: NMI handler (perf_event_nmi_handler) took too long to run: 0.000 msecs
perf: interrupt took too long (642744 > 2500), lowering kernel.perf_event_max_sample_rate to 1000
INFO: NMI handler (perf_event_nmi_handler) took too long to run: 82.270 msecs
INFO: NMI handler (perf_event_nmi_handler) took too long to run: 680.608 msecs
INFO: NMI handler (perf_event_nmi_handler) took too long to run: 100.952 msecs
...
watchdog: BUG: soft lockup - CPU#3 stuck for 22s! [qemu-system-x86:7487]
Tested on a Micro-Star International Co., Ltd. MS-7C59/Creator TRX40
motherboard with an AMD Ryzen Threadripper 3970X.
Link: https://lore.kernel.org/r/20200524003529.598434ff@f31-4.lan
Signed-off-by: Kevin Buettner <kevinb@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The AMD Matisse HD Audio & USB 3.0 devices advertise Function Level Reset
support, but hang when an FLR is triggered.
To reproduce the problem, attach the device to a VM, then detach and try to
attach again.
Rename the existing quirk_intel_no_flr(), which was not Intel-specific, to
quirk_no_flr(), and apply it to prevent the use of FLR on these AMD
devices.
Link: https://lore.kernel.org/r/CAAri2DpkcuQZYbT6XsALhx2e6vRqPHwtbjHYeiH7MNp4zmt1RA@mail.gmail.com
Signed-off-by: Marcos Scriven <marcos@scriven.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add pci_ats_supported(), which checks whether a device has an ATS
capability, and whether it is trusted. A device is untrusted if it is
plugged into an external-facing port such as Thunderbolt and could be
spoofing an existing device to exploit weaknesses in the IOMMU
configuration. PCIe ATS is one such weaknesses since it allows
endpoints to cache IOMMU translations and emit transactions with
'Translated' Address Type (10b) that partially bypass the IOMMU
translation.
The SMMUv3 and VT-d IOMMU drivers already disallow ATS and transactions
with 'Translated' Address Type for untrusted devices. Add the check to
pci_enable_ats() to let other drivers (AMD IOMMU for now) benefit from
it.
By checking ats_cap, the pci_ats_supported() helper also returns whether
ATS was globally disabled with pci=noats, and could later include more
things, for example whether the whole PCIe hierarchy down to the
endpoint supports ATS.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20200520152201.3309416-2-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This controller can be found on Loongson-2K SoC, Loongson-3
systems with RS780E/LS7A PCH.
The RS780E part of code was previously located at
arch/mips/pci/ops-loongson3.c and now it can use generic PCI
driver implementation.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Don't disable MEM/IO decoding when a device have both non_compliant_bars
and mmio_always_on.
That would allow us quirk devices with junk in BARs but can't disable
their decoding.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Acked-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
No functional change. Get "struct pcie_port *" from private data
pointer of "struct irq_domain" in dw_pcie_irq_domain_free() to make
it look similar to how "struct pcie_port *" is obtained in
dw_pcie_irq_domain_alloc()
Link: https://lore.kernel.org/r/20191220100550.777-1-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
The vim3l board does not work with a standard PCIe switch (ASM1184e),
spitting all kind of errors - hinting at HW misconfiguration (no link,
port enumeration issues, etc).
According to the the Synopsys DWC PCIe Reference Manual, in the section
dedicated to the PLCR register, bit 7 is described (FAST_LINK_MODE) as:
"Sets all internal timers to fast mode for simulation purposes."
it is sound to set this bit from a simulation perspective, but on actual
silicon, which expects timers to have a nominal value, it is not.
Make sure the FAST_LINK_MODE bit is cleared when configuring the RC
to solve this problem.
Link: https://lore.kernel.org/r/20200429164230.309922-1-maz@kernel.org
Fixes: 9c0ef6d34f ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver")
Signed-off-by: Marc Zyngier <maz@kernel.org>
[lorenzo.pieralisi@arm.com: commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
On a system that uses the internal DWC MSI widget, I get this
warning from debugfs when CONFIG_GENERIC_IRQ_DEBUGFS is selected:
debugfs: File ':soc:pcie@fc000000' in directory 'domains' already present!
This is due to the fact that the DWC MSI code tries to register two
IRQ domains for the same firmware node, without telling the low
level code how to distinguish them (by setting a bus token). This
further confuses debugfs which tries to create corresponding
files for each domain.
Fix it by tagging the inner domain as DOMAIN_BUS_NEXUS, which is
the closest thing we have as to "generic MSI".
Link: https://lore.kernel.org/r/20200501113921.366597-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
platform_get_resource() may fail and return NULL, so we had better
check its return value to avoid a NULL pointer dereference a bit later
in the code. Fix it to use devm_platform_ioremap_resource_byname()
instead of calling platform_get_resource_byname() and devm_ioremap().
Link: https://lore.kernel.org/r/20200429015027.134485-1-weiyongjun1@huawei.com
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
[lorenzo.pieralisi@arm.com: commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Fix the following sparse warning:
drivers/pci/controller/dwc/pcie-intel-gw.c:456:5: warning: symbol
'intel_pcie_cpu_addr' was not declared. Should it be static?
Link: https://lore.kernel.org/r/20200415084953.6533-1-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Function dw_pcie_prog_outbound_atu_unroll() does not program the upper
32-bit ATU limit register. Since ATU programming functions limit the
size of the translated region to 4GB by using a u32 size parameter,
these issues may combine into undefined behavior for resource sizes
with non-zero upper 32-bits.
For example, a 128GB address space starting at physical CPU address of
0x2000000000 with size of 0x2000000000 needs the following values
programmed into the lower and upper 32-bit limit registers:
0x3fffffff in the upper 32-bit limit register
0xffffffff in the lower 32-bit limit register
Currently, only the lower 32-bit limit register is programmed with a
value of 0xffffffff but the upper 32-bit limit register is not being
programmed. As a result, the upper 32-bit limit register remains at its
default value after reset of 0x0.
These issues may combine to produce undefined behavior since the ATU
limit address may be lower than the ATU base address. Programming the
upper ATU limit address register prevents such undefined behavior despite
the region size getting truncated due to the 32-bit size limit.
Link: https://lore.kernel.org/r/1585785493-23210-1-git-send-email-alan.mikhak@sifive.com
Signed-off-by: Alan Mikhak <alan.mikhak@sifive.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Per PCIe 5.0 r1.0, Terms and Acronyms, Page 80:
Reserved register fields must be read only and must return 0 (all 0's
for multi-bit fields) when read. Reserved encodings for register and
packet fields must not be used. Any implementation dependence on a
Reserved field value or encoding will result in an implementation that
is not PCI Express-compliant.
This patch ensures reads will return 0 for any bit not in the Read-Only,
Read-Write, or Write-1-to-Clear bitmasks.
Link: https://lore.kernel.org/r/20200511162117.6674-5-jonathan.derrick@intel.com
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Add missing bits from PCIe 4.0 and updates for PCIe 5.0 r1.0.
PCIe 4.0:
Device Status bit 6 - W1C - Emergency Power Reduction Detected
Link Control bits 15:14 - RW - DRS Signaling Control
Slot Control bit 13 - RW - Auto Slow Power Limit Disable
PCIe 5.0:
Slot Control bit 14 - RW - In-Band PD Disable
Link: https://lore.kernel.org/r/20200511162117.6674-4-jonathan.derrick@intel.com
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
The upper 16-bits of Root Control contain the Root Capabilities
register. The code instead describes the Root Status register in the
upper 16-bits, although it uses the correct bit definition for Root
Capabilities, and for Root Status in the next definition.
Fix this comment and add a comment describing the Root Status register.
Link: https://lore.kernel.org/r/20200511162117.6674-3-jonathan.derrick@intel.com
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
This patch fixes two bit conflicts in the pci-bridge-emul driver:
1. Bit 3 of Device Status (19 of Device Control) is marked as both
Write-1-to-Clear and Read-Only. It should be Write-1-to-Clear.
The Read-Only and Reserved bitmasks are shifted by 1 bit due to this
error.
2. Bit 12 of Slot Control is marked as both Read-Write and Reserved.
It should be Read-Write.
Link: https://lore.kernel.org/r/20200511162117.6674-2-jonathan.derrick@intel.com
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
R-Car PCIe controller has support to map multiple memory regions for
mapping the outbound memory in local system also the controller limits
single allocation for each region (that is, once a chunk is used from the
region it cannot be used to allocate a new one). This features inspires to
add support for handling multiple memory bases in endpoint framework.
With this patch pci_epc_mem_init() initializes address space for endpoint
controller which support single window and pci_epc_multi_mem_init()
initializes multiple windows supported by endpoint controller.
Link: https://lore.kernel.org/r/1588854799-13710-6-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Use bridge resource definitions instead of using the PCI_BRIDGE_RESOURCES
constant with an integer offeset.
Link: https://lore.kernel.org/r/20200520183411.1534621-2-kw@linux.com
Signed-off-by: Krzysztof Wilczynski <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Except for Endpoints, we enable PTM at enumeration-time. Previously we did
not account for the fact that Switch Downstream Ports are not permitted to
have a PTM capability; their PTM behavior is controlled by the Upstream
Port (PCIe r5.0, sec 7.9.16). Since Downstream Ports don't have a PTM
capability, we did not mark them as "ptm_enabled", which meant that
pci_enable_ptm() on an Endpoint failed because there was no PTM path to it.
Mark Downstream Ports as "ptm_enabled" if their Upstream Port has PTM
enabled.
Fixes: eec097d431 ("PCI: Add pci_enable_ptm() for drivers to enable PTM on endpoints")
Reported-by: Aditya Paluri <Venkata.AdityaPaluri@synopsys.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
shpchp_unconfigure_device() always returned 0, so there's no reason for a
return value. In addition, remove_board() checked the return value for
possible error which is unnecessary.
Convert shpchp_unconfigure_device() to a void function and remove the
return value check. This addresses the following Coccinelle warning:
drivers/pci/hotplug/shpchp_pci.c:66:5-7: Unneeded variable: "rc". Return "0" on line 86
Link: https://lore.kernel.org/r/20200521190457.1066600-1-kw@linux.com
Signed-off-by: Krzysztof Wilczynski <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Use "true" instead of 1 to initialize "bool use_dma_mrpc". This resolves
the following Coccinelle warning:
drivers/pci/switch/switchtec.c:28:12-24: WARNING: Assignment of 0/1 to bool variable
Link: https://lore.kernel.org/r/20200521200439.1076672-1-kw@linux.com
Signed-off-by: Krzysztof Wilczynski <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Fix kernel-doc of the "srv" parameter to pcie_pme_resume() and
pcie_pme_remove(). Building with W=1 produced these warnings:
drivers/pci/pcie/pme.c:414: warning: Function parameter or member 'srv' not described in 'pcie_pme_resume'
drivers/pci/pcie/pme.c:437: warning: Function parameter or member 'srv' not described in 'pcie_pme_remove'
Link: https://lore.kernel.org/r/1589612414-61682-1-git-send-email-f.fangjian@huawei.com
Signed-off-by: Jay Fang <f.fangjian@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
On s390 PCI Virtual Functions (VFs) are scanned by firmware and are made
available to Linux via the hot-plug interface. As such the common code
path of doing the scan directly using the parent Physical Function (PF)
is not used and fenced off with the no_vf_scan attribute.
Even if the partition created the VFs itself e.g. using the sriov_numvfs
attribute of a PF, the PF/VF links thus need to be established after the
fact. To do this when a VF is plugged we scan through all functions on
the same zbus and test whether they are the parent PF in which case we
establish the necessary links.
With these links established there is now no more need to fence off
pci_iov_remove_virtfn() for pdev->no_vf_scan as the common code now
works fine.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Link: https://lore.kernel.org/r/20200506154139.90609-3-schnelle@linux.ibm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Currently pci_iov_add_virtfn() scans the SR-IOV BARs, adds the VF to the
bus and also creates the sysfs links between the newly added VF and its
parent PF.
With pdev->no_vf_scan fencing off the entire pci_iov_add_virtfn() call
s390 as the sole pdev->no_vf_scan user thus ends up missing these sysfs
links which are required for example by QEMU/libvirt.
Instead of duplicating the code refactor pci_iov_add_virtfn() to make
sysfs link creation callable separately.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Link: https://lore.kernel.org/r/20200506154139.90609-1-schnelle@linux.ibm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The PCI Bus Binding specification (IEEE Std 1275-1994 Revision 2.1 [1])
defines both Vendor ID and Device ID to be 32-bits. Fix
pcie-cadence-host.c driver to read 32-bit Vendor ID and Device ID
properties from device tree.
[1] -> https://www.devicetree.org/open-firmware/bindings/pci/pci2_1.pdf
Link: https://lore.kernel.org/r/20200508130646.23939-4-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Tom Joseph <tjoseph@cadence.com>
"cdns,max-outbound-regions" device tree property provides the
maximum number of outbound regions supported by the Host PCIe
controller. However the outbound regions are configured based
on what is populated in the "ranges" DT property.
Avoid using two properties for configuring outbound regions and
use only "ranges" property instead.
Link: https://lore.kernel.org/r/20200508130646.23939-3-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Tom Joseph <tjoseph@cadence.com>
PCI-E capability macros are already defined in linux/pci_regs.h.
Remove their reimplementation in pcie-aardvark.
Link: https://lore.kernel.org/r/20200430080625.26070-9-pali@kernel.org
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With recent proposed changes for U-Boot it is possible that bootloader
won't initialize the PHY for this controller (currently the PHY is
initialized regardless whether PCI is used in U-Boot, but with these
proposed changes the PHY is initialized only on request).
Since the mvebu-a3700-comphy driver by Miquèl Raynal supports enabling
PCIe PHY, and since Linux' functionality should be independent on what
bootloader did, add code for enabling generic PHY if found in device OF
node.
The mvebu-a3700-comphy driver does PHY powering via SMC calls to ARM
Trusted Firmware. The corresponding code in ARM Trusted Firmware skips
one register write which U-Boot does not: step 7 ("Enable TX"), see [1].
Instead ARM Trusted Firmware expects PCIe driver to do this step,
probably because the register is in PCIe controller address space,
instead of PHY address space. We therefore add this step into the
advk_pcie_setup_hw function.
[1] https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/tree/drivers/marvell/comphy/phy-comphy-3700.c?h=v2.3-rc2#n836
Link: https://lore.kernel.org/r/20200430080625.26070-8-pali@kernel.org
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Miquèl Raynal <miquel.raynal@bootlin.com>
This register is applicable only when the controller is configured for
Endpoint mode, which is not the case for the current version of this
driver.
Attempting to remove this code though caused some ath10k cards to stop
working, so for some unknown reason it is needed here.
This should be investigated and a comment explaining this should be put
before the code, so we add a FIXME comment for now.
Link: https://lore.kernel.org/r/20200430080625.26070-7-pali@kernel.org
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for issuing PERST via GPIO specified in 'reset-gpios'
property (as described in PCI device tree bindings).
Some buggy cards (e.g. Compex WLE900VX or WLE1216) are not detected
after reboot when PERST is not issued during driver initialization.
If bootloader already enabled link training then issuing PERST has no
effect for some buggy cards (e.g. Compex WLE900VX) and these cards are
not detected. We therefore clear the LINK_TRAINING_EN register before.
It was observed that Compex WLE900VX card needs to be in PERST reset
for at least 10ms if bootloader enabled link training.
Tested on Turris MOX.
Link: https://lore.kernel.org/r/20200430080625.26070-6-pali@kernel.org
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently the aardvark driver trains link in PCIe gen2 mode. This may
cause some buggy gen1 cards (such as Compex WLE900VX) to be unstable or
even not detected. Moreover when ASPM code tries to retrain link second
time, these cards may stop responding and link goes down. If gen1 is
used this does not happen.
Unconditionally forcing gen1 is not a good solution since it may have
performance impact on gen2 cards.
To overcome this, read 'max-link-speed' property (as defined in PCI
device tree bindings) and use this as max gen mode. Then iteratively try
link training at this mode or lower until successful. After successful
link training choose final controller gen based on Negotiated Link Speed
from Link Status register, which should match card speed.
Link: https://lore.kernel.org/r/20200430080625.26070-5-pali@kernel.org
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Interpret zero value of max-link-speed property as invalid,
as the device tree bindings documentation specifies.
Link: https://lore.kernel.org/r/20200430080625.26070-4-pali@kernel.org
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Trying to change Link Status register does not have any effect as this
is a read-only register. Trying to overwrite bits for Negotiated Link
Width does not make sense.
In future proper change of link width can be done via Lane Count Select
bits in PCIe Control 0 register.
Trying to unconditionally enable ASPM L0s via ASPM Control bits in Link
Control register is wrong. There should be at least some detection if
endpoint supports L0s as isn't mandatory.
Moreover ASPM Control bits in Link Control register are controlled by
pcie/aspm.c code which sets it according to system ASPM settings,
immediately after aardvark driver probes. So setting these bits by
aardvark driver has no long running effect.
Remove code which touches ASPM L0s bits from this driver and let
kernel's ASPM implementation to set ASPM state properly.
Some users are reporting issues that this code is problematic for some
Intel wifi cards and removing it fixes them, see e.g.:
https://bugzilla.kernel.org/show_bug.cgi?id=196339
If problems with Intel wifi cards occur even after this commit, then
pcie/aspm.c code could be modified / hooked to not enable ASPM L0s state
for affected problematic cards.
Link: https://lore.kernel.org/r/20200430080625.26070-3-pali@kernel.org
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adding even 100ms (PCI_PM_D3COLD_WAIT) delay between enabling link
training and starting link training causes detection issues with some
buggy cards (such as Compex WLE900VX).
Move the code which enables link training immediately before the one
which starts link traning.
This fixes detection issues of Compex WLE900VX card on Turris MOX after
cold boot.
Link: https://lore.kernel.org/r/20200430080625.26070-2-pali@kernel.org
Fixes: f4c7d053d7 ("PCI: aardvark: Wait for endpoint to be ready...")
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Kai-Heng Feng reported that it takes a long time (> 1 s) to resume
Thunderbolt-connected devices from both runtime suspend and system sleep
(s2idle).
This was because some Downstream Ports that support > 5 GT/s do not also
support Data Link Layer Link Active reporting. Per PCIe r5.0 sec 6.6.1:
With a Downstream Port that supports Link speeds greater than 5.0 GT/s,
software must wait a minimum of 100 ms after Link training completes
before sending a Configuration Request to the device immediately below
that Port. Software can determine when Link training completes by polling
the Data Link Layer Link Active bit or by setting up an associated
interrupt (see Section 6.7.3.3).
Sec 7.5.3.6 requires such Ports to support DLL Link Active reporting, but
at least the Intel JHL6240 Thunderbolt 3 Bridge [8086:15c0] and the Intel
JHL7540 Thunderbolt 3 Bridge [8086:15ea] do not.
Previously we tried to wait for Link training to complete, but since there
was no DLL Link Active reporting, all we could do was wait the worst-case
1000 ms, then another 100 ms.
Instead of using the supported speeds to determine whether to wait for Link
training, check whether the port supports DLL Link Active reporting. The
Ports in question do not, so we'll wait only the 100 ms required for Ports
that support Link speeds <= 5 GT/s.
This of course assumes these Ports always train the Link within 100 ms even
if they are operating at > 5 GT/s, which is not required by the spec.
[bhelgaas: commit log, comment]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206837
Link: https://lore.kernel.org/r/20200514133043.27429-1-mika.westerberg@linux.intel.com
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The caller of pcie_wait_for_link_delay() specifies the time to wait after
the link becomes active. When the downstream port doesn't support link
active reporting, obviously we can't tell when the link becomes active, so
we waited the worst-case time (1000 ms) plus 100 ms, ignoring the delay
from the caller.
Instead, wait for 1000 ms + the delay from the caller.
Fixes: 4827d63891 ("PCI/PM: Add pcie_wait_for_link_delay()")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Root Complex Integrated Endpoints (RCiEPs) do not have an upstream bridge,
so pci_configure_mps() previously ignored them, which may result in reduced
performance.
Instead, program the Max_Payload_Size of RCiEPs to the maximum supported
value (unless it is limited for the PCIE_BUS_PEER2PEER case). This also
affects the subsequent programming of Max_Read_Request_Size because Linux
programs MRRS based on the MPS value.
Fixes: 9dae3a9729 ("PCI: Move MPS configuration check to pci_configure_device()")
Link: https://lore.kernel.org/r/1585343775-4019-1-git-send-email-ashok.raj@intel.com
Tested-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
The PCI code has several paths where the struct pci_host_bridge is freed
directly. This is wrong because it contains a struct device which is
refcounted and should be freed using put_device(). This can result in
use-after-free errors. I think this problem has existed since 2012 with
commit 7b54366358 ("PCI: add generic device into pci_host_bridge
struct"). It generally hasn't mattered as most host bridge drivers are
still built-in and can't unbind.
The problem is a struct device should never be freed directly once
device_initialize() is called and a ref is held, but that doesn't happen
until pci_register_host_bridge(). There's then a window between allocating
the host bridge and pci_register_host_bridge() where kfree should be used.
This is fragile and requires callers to do the right thing. To fix this, we
need to split device_register() into device_initialize() and device_add()
calls, so that the host bridge struct is always freed by using a
put_device().
devm_pci_alloc_host_bridge() is using devm_kzalloc() to allocate struct
pci_host_bridge which will be freed directly. Instead, we can use a custom
devres action to call put_device().
Link: https://lore.kernel.org/r/20200513223859.11295-2-robh@kernel.org
Reported-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
