The current PTP initialization logic does not account for firmware
reset that may cause PTP capability to change. The valid pointer
bp->ptp_cfg is used to indicate that the device is capable of PTP
and that it has been initialized. So we must clean up bp->ptp_cfg
and free it if the firmware after reset does not support PTP.
Fixes: 93cb62d98e ("bnxt_en: Enable hardware PTP support")
Cc: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The device needs to be in ifup state for PTP to function, so move
bnxt_ptp_init() to bnxt_open(). This means that the PHC will be
registered during bnxt_open().
This also makes firmware reset work correctly. PTP configurations
may change after firmware upgrade or downgrade. bnxt_open() will
be called after firmware reset, so it will work properly.
bnxt_ptp_start() is now incorporated into bnxt_ptp_init(). We now
also need to call bnxt_ptp_clear() in bnxt_close().
Fixes: 93cb62d98e ("bnxt_en: Enable hardware PTP support")
Cc: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bnxt_half_open_nic() is called during during ethtool self test and is
protected by rtnl_lock. Firmware reset can be happening at the same
time. Only critical portions of the entire firmware reset sequence
are protected by the rtnl_lock. It is possible that bnxt_half_open_nic()
can be called when the firmware reset sequence is aborting. In that
case, bnxt_half_open_nic() needs to check if the ABORT_ERR flag is set
and abort if it is. The ethtool self test will fail but the NIC will be
brought to a consistent IF_DOWN state.
Without this patch, if bnxt_half_open_nic() were to continue in this
error state, it may crash like this:
bnxt_en 0000:82:00.1 enp130s0f1np1: FW reset in progress during close, FW reset will be aborted
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
...
Process ethtool (pid: 333327, stack limit = 0x0000000046476577)
Call trace:
bnxt_alloc_mem+0x444/0xef0 [bnxt_en]
bnxt_half_open_nic+0x24/0xb8 [bnxt_en]
bnxt_self_test+0x2dc/0x390 [bnxt_en]
ethtool_self_test+0xe0/0x1f8
dev_ethtool+0x1744/0x22d0
dev_ioctl+0x190/0x3e0
sock_ioctl+0x238/0x480
do_vfs_ioctl+0xc4/0x758
ksys_ioctl+0x84/0xb8
__arm64_sys_ioctl+0x28/0x38
el0_svc_handler+0xb0/0x180
el0_svc+0x8/0xc
Fixes: a1301f08c5 ("bnxt_en: Check abort error state in bnxt_open_nic().")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Only pass supported VLAN protocol IDs for stripped VLAN tags to the
stack. The stack will hit WARN() if the protocol ID is unsupported.
Existing firmware sets up the chip to strip 0x8100, 0x88a8, 0x9100.
Only the 1st two protocols are supported by the kernel.
Fixes: a196e96bb6 ("bnxt_en: clean up VLAN feature bit handling")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When bnxt_open() fails in the firmware reset path, the driver needs to
gracefully abort, but it is executing code that should be invoked only
in the success path. Define a function to abort FW reset and
consolidate all error paths to call this new function.
Fixes: dab62e7c2d ("bnxt_en: Implement faster recovery for firmware fatal error.")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the BNXT_FW_RESET_STATE_POLL_VF state in bnxt_fw_reset_task() after all
VFs have unregistered, we need to check for BNXT_STATE_ABORT_ERR after
we acquire the rtnl_lock. If the flag is set, we need to abort.
Fixes: 230d1f0de7 ("bnxt_en: Handle firmware reset.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The capabilities can change after firmware upgrade/downgrade, so we
should get the up-to-date RoCE capabilities everytime bnxt_ulp_probe()
is called.
Fixes: 2151fe0830 ("bnxt_en: Handle RESET_NOTIFY async event from firmware.")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ETS proportions are presented to HWRM_QUEUE_COS2BW_CFG as minimum
bandwidth constraints. Thus, zero is a legal value for a given TC.
However, if all the other TCs sum up to 100%, then at least one
hardware queue will starve, resulting in guaranteed TX timeouts.
Reject such nonsensical configurations.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If device is already disabled in reset path and PCI io error is
detected before the device could be enabled, driver could
call pci_disable_device() for already disabled device. Fix this
problem by calling pci_disable_device() only if the device is already
enabled.
Fixes: 6316ea6db9 ("bnxt_en: Enable AER support.")
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The original implementation of RPM handling in probe() was mostly
correct, except it failed to call pm_runtime_get_*() to activate the
hardware. The subsequent fix, 734882a8bf ("spi: cadence: Correct
initialisation of runtime PM"), breaks the implementation further,
to the point where the system using this hard IP on ZynqMP hangs on
boot, because it accesses hardware which is gated off.
Undo 734882a8bf ("spi: cadence: Correct initialisation of runtime
PM") and instead add missing pm_runtime_get_noresume() and move the
RPM disabling all the way to the end of probe(). That makes ZynqMP
not hang on boot yet again.
Fixes: 734882a8bf ("spi: cadence: Correct initialisation of runtime PM")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210716182133.218640-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The vmbus module uses a rotational algorithm to assign target CPUs to
a device's channels. Depending on the timing of different device's channel
offers, different channels of a device may be assigned to the same CPU.
For example on a VM with 2 CPUs, if NIC A and B's channels are offered
in the following order, NIC A will have both channels on CPU0, and
NIC B will have both channels on CPU1 -- see below. This kind of
assignment causes RSS load that is spreading across different channels
to end up on the same CPU.
Timing of channel offers:
NIC A channel 0
NIC B channel 0
NIC A channel 1
NIC B channel 1
VMBUS ID 14: Class_ID = {f8615163-df3e-46c5-913f-f2d2f965ed0e} - Synthetic network adapter
Device_ID = {cab064cd-1f31-47d5-a8b4-9d57e320cccd}
Sysfs path: /sys/bus/vmbus/devices/cab064cd-1f31-47d5-a8b4-9d57e320cccd
Rel_ID=14, target_cpu=0
Rel_ID=17, target_cpu=0
VMBUS ID 16: Class_ID = {f8615163-df3e-46c5-913f-f2d2f965ed0e} - Synthetic network adapter
Device_ID = {244225ca-743e-4020-a17d-d7baa13d6cea}
Sysfs path: /sys/bus/vmbus/devices/244225ca-743e-4020-a17d-d7baa13d6cea
Rel_ID=16, target_cpu=1
Rel_ID=18, target_cpu=1
Update the vmbus CPU assignment algorithm to avoid duplicate CPU
assignments within a device.
The new algorithm iterates num_online_cpus + 1 times.
The existing rotational algorithm to find "next NUMA & CPU" is still here.
But if the resulting CPU is already used by the same device, it will try
the next CPU.
In the last iteration, it assigns the channel to the next available CPU
like the existing algorithm. This is not normally expected, because
during device probe, we limit the number of channels of a device to
be <= number of online CPUs.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1626459673-17420-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
- Skip invalid hybrid PMU on hybrid systems when the atom (little) CPUs are offlined.
- Fix 'perf test' problems related to the recently added hybrid (BIG/little) code.
- Split ARM's coresight (hw tracing) decode by aux records to avoid fatal decoding errors.
- Fix add event failure in 'perf probe' when running 32-bit perf in a 64-bit kernel.
- Fix 'perf sched record' failure when CONFIG_SCHEDSTATS is not set.
- Fix memory and refcount leaks detected by ASAn when running 'perf test', should be
clean of warnings now.
- Remove broken definition of __LITTLE_ENDIAN from tools' linux/kconfig.h, which was
breaking the build in some systems.
- Cast PTHREAD_STACK_MIN to int as it may turn into 'long sysconf(__SC_THREAD_STACK_MIN_VALUE),
breaking the build in some systems.
- Fix libperf build error with LIBPFM4=1.
- Sync UAPI files changed by the memfd_secret new syscall.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYPR8OgAKCRCyPKLppCJ+
J9vSAQDBCAvQiZQvOC8tgvUV8CIRorB/O43HOiX1pEUCVCdPRgEA0WGIbfjH3bMj
zYOpXRpDag5iAVvn3DmpJ38laXJexQI=
=0t/C
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.14-2021-07-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Skip invalid hybrid PMU on hybrid systems when the atom (little) CPUs
are offlined.
- Fix 'perf test' problems related to the recently added hybrid
(BIG/little) code.
- Split ARM's coresight (hw tracing) decode by aux records to avoid
fatal decoding errors.
- Fix add event failure in 'perf probe' when running 32-bit perf in a
64-bit kernel.
- Fix 'perf sched record' failure when CONFIG_SCHEDSTATS is not set.
- Fix memory and refcount leaks detected by ASAn when running 'perf
test', should be clean of warnings now.
- Remove broken definition of __LITTLE_ENDIAN from tools'
linux/kconfig.h, which was breaking the build in some systems.
- Cast PTHREAD_STACK_MIN to int as it may turn into 'long
sysconf(__SC_THREAD_STACK_MIN_VALUE), breaking the build in some
systems.
- Fix libperf build error with LIBPFM4=1.
- Sync UAPI files changed by the memfd_secret new syscall.
* tag 'perf-tools-fixes-for-v5.14-2021-07-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (35 commits)
perf sched: Fix record failure when CONFIG_SCHEDSTATS is not set
perf probe: Fix add event failure when running 32-bit perf in a 64-bit kernel
perf data: Close all files in close_dir()
perf probe-file: Delete namelist in del_events() on the error path
perf test bpf: Free obj_buf
perf trace: Free strings in trace__parse_events_option()
perf trace: Free syscall tp fields in evsel->priv
perf trace: Free syscall->arg_fmt
perf trace: Free malloc'd trace fields on exit
perf lzma: Close lzma stream on exit
perf script: Fix memory 'threads' and 'cpus' leaks on exit
perf script: Release zstd data
perf session: Cleanup trace_event
perf inject: Close inject.output on exit
perf report: Free generated help strings for sort option
perf env: Fix memory leak of cpu_pmu_caps
perf test maps__merge_in: Fix memory leak of maps
perf dso: Fix memory leak in dso__new_map()
perf test event_update: Fix memory leak of unit
perf test event_update: Fix memory leak of evlist
...
* Fix shrink eligibility checking when sparse inode clusters enabled.
* Reset '..' directory entries when unlinking directories to prevent
verifier errors if fs is shrinked later.
* Don't report unusable extent size hints to FSGETXATTR.
* Don't warn when extent size hints are unusable because the sysadmin
configured them that way.
* Fix insufficient parameter validation in GROWFSRT ioctl.
* Fix integer overflow when adding rt volumes to filesystem.
-----BEGIN PGP SIGNATURE-----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=dKfy
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"A few fixes for issues in the new online shrink code, additional
corrections for my recent bug-hunt w.r.t. extent size hints on
realtime, and improved input checking of the GROWFSRT ioctl.
IOW, the usual 'I somehow got bored during the merge window and
resumed auditing the farther reaches of xfs':
- Fix shrink eligibility checking when sparse inode clusters enabled
- Reset '..' directory entries when unlinking directories to prevent
verifier errors if fs is shrinked later
- Don't report unusable extent size hints to FSGETXATTR
- Don't warn when extent size hints are unusable because the sysadmin
configured them that way
- Fix insufficient parameter validation in GROWFSRT ioctl
- Fix integer overflow when adding rt volumes to filesystem"
* tag 'xfs-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: detect misaligned rtinherit directory extent size hints
xfs: fix an integer overflow error in xfs_growfs_rt
xfs: improve FSGROWFSRT precondition checking
xfs: don't expose misaligned extszinherit hints to userspace
xfs: correct the narrative around misaligned rtinherit/extszinherit dirs
xfs: reset child dir '..' entry when unlinking child
xfs: check for sparse inode clusters that cross new EOAG when shrinking
* Fix KASAN warnings due to integer overflow in SEEK_DATA/SEEK_HOLE.
* Fix assertion errors when using inlinedata files on gfs2.
-----BEGIN PGP SIGNATURE-----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=Vbt9
-----END PGP SIGNATURE-----
Merge tag 'iomap-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap fixes from Darrick Wong:
"A handful of bugfixes for the iomap code.
There's nothing especially exciting here, just fixes for UBSAN (not
KASAN as I erroneously wrote in the tag message) warnings about
undefined behavior in the SEEK_DATA/SEEK_HOLE code, and some
reshuffling of per-page block state info to fix some problems with
gfs2.
- Fix KASAN warnings due to integer overflow in SEEK_DATA/SEEK_HOLE
- Fix assertion errors when using inlinedata files on gfs2"
* tag 'iomap-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: Don't create iomap_page objects in iomap_page_mkwrite_actor
iomap: Don't create iomap_page objects for inline files
iomap: Permit pages without an iop to enter writeback
iomap: remove the length variable in iomap_seek_hole
iomap: remove the length variable in iomap_seek_data
- Restore the original behavior of scripts/setlocalversion when
LOCALVERSION is set to empty.
- Show Kconfig prompts even for 'make -s'
- Fix the combination of COFNIG_LTO_CLANG=y and CONFIG_MODVERSIONS=y
for older GNU Make versions
-----BEGIN PGP SIGNATURE-----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=7eEZ
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Restore the original behavior of scripts/setlocalversion when
LOCALVERSION is set to empty.
- Show Kconfig prompts even for 'make -s'
- Fix the combination of COFNIG_LTO_CLANG=y and CONFIG_MODVERSIONS=y
for older GNU Make versions
* tag 'kbuild-fixes-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Documentation: Fix intiramfs script name
Kbuild: lto: fix module versionings mismatch in GNU make 3.X
kbuild: do not suppress Kconfig prompts for silent build
scripts/setlocalversion: fix a bug when LOCALVERSION is empty
Commit 63346650c1 ("netrom: switch to sock timer API") switched to use
sock timer API. It replaces mod_timer() by sk_reset_timer(), and
del_timer() by sk_stop_timer().
Function sk_reset_timer() will increase the refcount of sock if it is
called on an inactive timer, hence, in case the timer expires, we need to
decrease the refcount ourselves in the handler, otherwise, the sock
refcount will be unbalanced and the sock will never be freed.
Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com>
Reported-by: syzbot+10f1194569953b72f1ae@syzkaller.appspotmail.com
Fixes: 63346650c1 ("netrom: switch to sock timer API")
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit ca84bd058d ("sctp: copy the optval from user space in
sctp_setsockopt"), it does memory allocation in sctp_setsockopt with
the optlen, and it would fail the allocation and return error if the
optlen from user space is a huge value.
This breaks some sockopts, like SCTP_HMAC_IDENT, SCTP_RESET_STREAMS and
SCTP_AUTH_KEY, as when processing these sockopts before, optlen would
be trimmed to a biggest value it needs when optlen is a huge value,
instead of failing the allocation and returning error.
This patch is to fix the allocation failure when it's a huge optlen from
user space by trimming it to the biggest size sctp sockopt may need when
necessary, and this biggest size is from sctp_setsockopt_reset_streams()
for SCTP_RESET_STREAMS, which is bigger than those for SCTP_HMAC_IDENT
and SCTP_AUTH_KEY.
Fixes: ca84bd058d ("sctp: copy the optval from user space in sctp_setsockopt")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The last argument of phy_clear_bits_mmd(..., u16 val); is u16 and not
int, just inline the value into the function call arguments.
No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Syzbot reported memory leak in tcindex_set_parms(). The problem was in
non-freed perfect hash in tcindex_partial_destroy_work().
In tcindex_set_parms() new tcindex_data is allocated and some fields from
old one are copied to new one, but not the perfect hash. Since
tcindex_partial_destroy_work() is the destroy function for old
tcindex_data, we need to free perfect hash to avoid memory leak.
Reported-and-tested-by: syzbot+f0bbb2287b8993d4fa74@syzkaller.appspotmail.com
Fixes: 331b72922c ("net: sched: RCU cls_tcindex")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In some cases skb head could be locked and entire header
data is pulled from skb. When skb_zerocopy() called in such cases,
following BUG is triggered. This patch fixes it by copying entire
skb in such cases.
This could be optimized incase this is performance bottleneck.
---8<---
kernel BUG at net/core/skbuff.c:2961!
invalid opcode: 0000 [#1] SMP PTI
CPU: 2 PID: 0 Comm: swapper/2 Tainted: G OE 5.4.0-77-generic #86-Ubuntu
Hardware name: OpenStack Foundation OpenStack Nova, BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:skb_zerocopy+0x37a/0x3a0
RSP: 0018:ffffbcc70013ca38 EFLAGS: 00010246
Call Trace:
<IRQ>
queue_userspace_packet+0x2af/0x5e0 [openvswitch]
ovs_dp_upcall+0x3d/0x60 [openvswitch]
ovs_dp_process_packet+0x125/0x150 [openvswitch]
ovs_vport_receive+0x77/0xd0 [openvswitch]
netdev_port_receive+0x87/0x130 [openvswitch]
netdev_frame_hook+0x4b/0x60 [openvswitch]
__netif_receive_skb_core+0x2b4/0xc90
__netif_receive_skb_one_core+0x3f/0xa0
__netif_receive_skb+0x18/0x60
process_backlog+0xa9/0x160
net_rx_action+0x142/0x390
__do_softirq+0xe1/0x2d6
irq_exit+0xae/0xb0
do_IRQ+0x5a/0xf0
common_interrupt+0xf/0xf
Code that triggered BUG:
int
skb_zerocopy(struct sk_buff *to, struct sk_buff *from, int len, int hlen)
{
int i, j = 0;
int plen = 0; /* length of skb->head fragment */
int ret;
struct page *page;
unsigned int offset;
BUG_ON(!from->head_frag && !hlen);
Signed-off-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Documentation was not changed when renaming the script in commit
80e715a06c ("initramfs: rename gen_initramfs_list.sh to
gen_initramfs.sh"). Fixing this.
Basically does:
$ sed -i -e s/gen_initramfs_list.sh/gen_initramfs.sh/g $(git grep -l gen_initramfs_list.sh)
Fixes: 80e715a06c ("initramfs: rename gen_initramfs_list.sh to gen_initramfs.sh")
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When building modules(CONFIG_...=m), I found some of module versions
are incorrect and set to 0.
This can be found in build log for first clean build which shows
WARNING: EXPORT symbol "XXXX" [drivers/XXX/XXX.ko] version generation failed,
symbol will not be versioned.
But in second build(incremental build), the WARNING disappeared and the
module version becomes valid CRC and make someone who want to change
modules without updating kernel image can't insert their modules.
The problematic code is
+ $(foreach n, $(filter-out FORCE,$^), \
+ $(if $(wildcard $(n).symversions), \
+ ; cat $(n).symversions >> $@.symversions))
For example:
rm -f fs/notify/built-in.a.symversions ; rm -f fs/notify/built-in.a; \
llvm-ar cDPrST fs/notify/built-in.a fs/notify/fsnotify.o \
fs/notify/notification.o fs/notify/group.o ...
`foreach n` shows nothing to `cat` into $(n).symversions because
`if $(wildcard $(n).symversions)` return nothing, but actually
they do exist during this line was executed.
-rw-r--r-- 1 root root 168580 Jun 13 19:10 fs/notify/fsnotify.o
-rw-r--r-- 1 root root 111 Jun 13 19:10 fs/notify/fsnotify.o.symversions
The reason is the $(n).symversions are generated at runtime, but
Makefile wildcard function expends and checks the file exist or not
during parsing the Makefile.
Thus fix this by use `test` shell command to check the file
existence in runtime.
Rebase from both:
1. [https://lore.kernel.org/lkml/20210616080252.32046-1-lecopzer.chen@mediatek.com/]
2. [https://lore.kernel.org/lkml/20210702032943.7865-1-lecopzer.chen@mediatek.com/]
Fixes: 38e8918490 ("kbuild: lto: fix module versioning")
Co-developed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When a new CONFIG option is available, Kbuild shows a prompt to get
the user input.
$ make
[ snip ]
Core Scheduling for SMT (SCHED_CORE) [N/y/?] (NEW)
This is the only interactive place in the build process.
Commit 174a1dcc96 ("kbuild: sink stdout from cmd for silent build")
suppressed Kconfig prompts as well because syncconfig is invoked by
the 'cmd' macro. You cannot notice the fact that Kconfig is waiting
for the user input.
Use 'kecho' to show the equivalent short log without suppressing stdout
from sub-make.
Fixes: 174a1dcc96 ("kbuild: sink stdout from cmd for silent build")
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
The commit 042da426f8 ("scripts/setlocalversion: simplify the short
version part") reduces indentation. Unfortunately, it also changes behavior
in a subtle way - if the user has empty "LOCALVERSION" variable, the plus
sign is appended to the kernel version. It wasn't appended before.
This patch reverts to the old behavior - we append the plus sign only if
the LOCALVERSION variable is not set.
Fixes: 042da426f8 ("scripts/setlocalversion: simplify the short version part")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The tracepoints trace_sched_stat_{wait, sleep, iowait} are not exposed to user
if CONFIG_SCHEDSTATS is not set, "perf sched record" records the three events.
As a result, the command fails.
Before:
#perf sched record sleep 1
event syntax error: 'sched:sched_stat_wait'
\___ unknown tracepoint
Error: File /sys/kernel/tracing/events/sched/sched_stat_wait not found.
Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?.
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
Solution:
Check whether schedstat tracepoints are exposed. If no, these events are not recorded.
After:
# perf sched record sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.163 MB perf.data (1091 samples) ]
# perf sched report
run measurement overhead: 4736 nsecs
sleep measurement overhead: 9059979 nsecs
the run test took 999854 nsecs
the sleep test took 8945271 nsecs
nr_run_events: 716
nr_sleep_events: 785
nr_wakeup_events: 0
...
------------------------------------------------------------
Fixes: 2a09b5de23 ("sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Yafang Shao <laoar.shao@gmail.com>
Link: http://lore.kernel.org/lkml/20210713112358.194693-1-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The "address" member of "struct probe_trace_point" uses long data type.
If kernel is 64-bit and perf program is 32-bit, size of "address"
variable is 32 bits.
As a result, upper 32 bits of address read from kernel are truncated, an
error occurs during address comparison in kprobe_warn_out_range().
Before:
# perf probe -a schedule
schedule is out of .text, skip it.
Error: Failed to add events.
Solution:
Change data type of "address" variable to u64 and change corresponding
address printing and value assignment.
After:
# perf.new.new probe -a schedule
Added new event:
probe:schedule (on schedule)
You can now use it in all perf tools, such as:
perf record -e probe:schedule -aR sleep 1
# perf probe -l
probe:schedule (on schedule@kernel/sched/core.c)
# perf record -e probe:schedule -aR sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.156 MB perf.data (1366 samples) ]
# perf report --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 1K of event 'probe:schedule'
# Event count (approx.): 1366
#
# Overhead Command Shared Object Symbol
# ........ ............... ................. ............
#
6.22% migration/0 [kernel.kallsyms] [k] schedule
6.22% migration/1 [kernel.kallsyms] [k] schedule
6.22% migration/2 [kernel.kallsyms] [k] schedule
6.22% migration/3 [kernel.kallsyms] [k] schedule
6.15% migration/10 [kernel.kallsyms] [k] schedule
6.15% migration/11 [kernel.kallsyms] [k] schedule
6.15% migration/12 [kernel.kallsyms] [k] schedule
6.15% migration/13 [kernel.kallsyms] [k] schedule
6.15% migration/14 [kernel.kallsyms] [k] schedule
6.15% migration/15 [kernel.kallsyms] [k] schedule
6.15% migration/4 [kernel.kallsyms] [k] schedule
6.15% migration/5 [kernel.kallsyms] [k] schedule
6.15% migration/6 [kernel.kallsyms] [k] schedule
6.15% migration/7 [kernel.kallsyms] [k] schedule
6.15% migration/8 [kernel.kallsyms] [k] schedule
6.15% migration/9 [kernel.kallsyms] [k] schedule
0.22% rcu_sched [kernel.kallsyms] [k] schedule
...
#
# (Cannot load tips.txt file, please install perf!)
#
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jianlin Lv <jianlin.lv@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lore.kernel.org/lkml/20210715063723.11926-1-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When using 'perf report' in directory mode, the first file is not closed
on exit, causing a memory leak.
The problem is caused by the iterating variable never reaching 0.
Fixes: 1455206311 ("perf data: Add perf_data__(create_dir|close_dir) functions")
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Link: http://lore.kernel.org/lkml/20210716141122.858082-1-rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
ASan reports some memory leaks when running:
# perf test "42: BPF filter"
This second leak is caused by a strlist not being dellocated on error
inside probe_file__del_events.
This patch adds a goto label before the deallocation and makes the error
path jump to it.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Fixes: e7895e422e ("perf probe: Split del_perf_probe_events()")
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/174963c587ae77fa108af794669998e4ae558338.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Here are the patches for this week that came as the fallout of
the merge window:
- Two fixes for the NVidia memory controller driver
- multiple defconfig files get patched to turn CONFIG_FB back on
after that is no longer selected by CONFIG_DRM
- ffa and scmpi firmware drivers fixes, mostly addressing compiler
and documentation warnings
- Platform specific fixes for device tree files on ASpeed,
Renesas and NVidia SoC, mostly for recent regressions.
- A workaround for a regression on the USB PHY with devlink when
the usb-nop-xceiv driver is not available until the rootfs is
mounted.
- Device tree compiler warnings in Arm Versatile-AB
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=1qJg
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Here are the patches for this week that came as the fallout of the
merge window:
- Two fixes for the NVidia memory controller driver
- multiple defconfig files get patched to turn CONFIG_FB back on
after that is no longer selected by CONFIG_DRM
- ffa and scmpi firmware drivers fixes, mostly addressing compiler
and documentation warnings
- Platform specific fixes for device tree files on ASpeed, Renesas
and NVidia SoC, mostly for recent regressions.
- A workaround for a regression on the USB PHY with devlink when the
usb-nop-xceiv driver is not available until the rootfs is mounted.
- Device tree compiler warnings in Arm Versatile-AB"
* tag 'soc-fixes-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits)
ARM: dts: versatile: Fix up interrupt controller node names
ARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-in
ARM: configs: Update u8500_defconfig
ARM: configs: Update Vexpress defconfig
ARM: configs: Update Versatile defconfig
ARM: configs: Update RealView defconfig
ARM: configs: Update Integrator defconfig
arm: Typo s/PCI_IXP4XX_LEGACY/IXP4XX_PCI_LEGACY/
firmware: arm_scmi: Fix range check for the maximum number of pending messages
firmware: arm_scmi: Avoid padding in sensor message structure
firmware: arm_scmi: Fix kernel doc warnings about return values
firmware: arm_scpi: Fix kernel doc warnings
firmware: arm_scmi: Fix kernel doc warnings
ARM: shmobile: defconfig: Restore graphical consoles
firmware: arm_ffa: Fix a possible ffa_linux_errmap buffer overflow
firmware: arm_ffa: Fix the comment style
firmware: arm_ffa: Simplify probe function
firmware: arm_ffa: Ensure drivers provide a probe function
firmware: arm_scmi: Fix possible scmi_linux_errmap buffer overflow
firmware: arm_scmi: Ensure drivers provide a probe function
...
This reverts commit 788691464c.
It's not clear why, but it causes unexplained problems in entirely
unrelated xfs code. The most likely explanation is some slab
corruption, possibly triggered due to CONFIG_SLUB_DEBUG_ON. See [1].
It ends up having a few other problems too, like build errors on
arch/arc, and Geert reporting it using much more memory on m68k [3] (it
probably does so elsewhere too, but it is probably just more noticeable
on m68k).
The architecture issues (both build and memory use) are likely just
because this change effectively force-enabled STACKDEPOT (along with a
very bad default value for the stackdepot hash size). But together with
the xfs issue, this all smells like "this commit was not ready" to me.
Link: https://lore.kernel.org/linux-xfs/YPE3l82acwgI2OiV@infradead.org/ [1]
Link: https://lore.kernel.org/lkml/202107150600.LkGNb4Vb-lkp@intel.com/ [2]
Link: https://lore.kernel.org/lkml/CAMuHMdW=eoVzM1Re5FVoEN87nKfiLmM2+Ah7eNu2KXEhCvbZyA@mail.gmail.com/ [3]
Reported-by: Christoph Hellwig <hch@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1 core fix for an oops which can occur if the error handling thread
fails to start for some reason and the driver is removed. The other
fixes are all minor ones in drivers.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYPJ61SYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pisheXKAP4hU81f
XTBkU9PoZhnsBhrpEb6Cpba46SioTZtd7dLe3wEAwU7j1jeiBkME5QgVwp69XoNT
s+4vUARc5+L0bTJ8aSA=
=uCk/
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"One core fix for an oops which can occur if the error handling thread
fails to start for some reason and the driver is removed.
The other fixes are all minor ones in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Add missing host_lock in ufshcd_vops_setup_xfer_req()
scsi: mpi3mr: Fix W=1 compilation warnings
scsi: pm8001: Clean up kernel-doc and comments
scsi: zfcp: Report port fc_security as unknown early during remote cable pull
scsi: core: Fix bad pointer dereference when ehandler kthread is invalid
scsi: fas216: Fix a build error
scsi: core: Fix the documentation of the scsi_execute() time parameter
-----BEGIN PGP SIGNATURE-----
iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmDxrnAACgkQiiy9cAdy
T1HlzQv/eGdv+jV5z6iMtrtcoOFOdcOvnj2ZUooGcZ5hETuoNDK5cKSsAOeAYACe
vWxhBpRSgCDDJS6TyV0bJyQ154ygoH8ycze/PYNgEhVVdEbJ9lN0/7w+oNyvCy8l
e8QWUriW+3kcF1fppT+5pdK471Tw3pKDqOwiivWq4Z0ca3Iod2Fo3RcsqX/gFhJu
bRl9dFNQqmW4AMmlU18n0qDstBB5/v4Ak4040+nACEVVInBMZadj13wNcj26ek16
D2l/+3MN1eY7ewLBSNh367/ufxlDLbHwsb6W9k21iilxo/cdMYqHGgLEahTwLDXd
6QWukYlsJFHo71l+WswW8Zz3z+VVc6xVb7HxCNtPGoc+ksthqvvmq9wfw+ONYQ0w
0h+r/7THw5HLQwAwLrTcHEvb9ECpOExItPTsfSR71logRORW4xe1snfoj7xRfCSE
BEWsVDOo/SagrTEMDpmSaNY+ePcUiPaeNM0GRbiB7BBnwKQDenswrCa7QS97YItc
piX2ile0
=aa4P
-----END PGP SIGNATURE-----
Merge tag '5.14-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Eight cifs/smb3 fixes, including three for stable.
Three are DFS related fixes, and two to fix problems pointed out by
static checkers"
* tag '5.14-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: do not share tcp sessions of dfs connections
SMB3.1.1: fix mount failure to some servers when compression enabled
cifs: added WARN_ON for all the count decrements
cifs: fix missing null session check in mount
cifs: handle reconnect of tcon when there is no cached dfs referral
cifs: fix the out of range assignment to bit fields in parse_server_interfaces
cifs: Do not use the original cruid when following DFS links for multiuser mounts
cifs: use the expiry output of dns_query to schedule next resolution
This KUnit fixes update for Linux 5.14-rc2 consists of fixes to kunit
tool and documentation:
-- asserts on older python versions.
-- fixes to misleading error messages when TAP header format is
incorrect or when file is missing.
-- fixes documentation dropping obsolete information about uml_abort
coverage.
-- removing unnecessary annotations
-----BEGIN PGP SIGNATURE-----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=p0Nt
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit fixes from Shuah Khan:
"Fixes to kunit tool and documentation:
- fix asserts on older python versions
- fixes to misleading error messages when TAP header format is
incorrect or when file is missing
- documentation fix: drop obsolete information about uml_abort
coverage
- remove unnecessary annotations"
* tag 'linux-kselftest-kunit-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: Assert the version requirement
kunit: tool: remove unnecessary "annotations" import
Documentation: kunit: drop obsolete note about uml_abort for coverage
kunit: tool: Fix error messages for cases of no tests and wrong TAP header
This Kselftest fixes update for Linux 5.14-rc2 consists of fix
to memory-hotplug hot-remove test to stop spamming logs with
dump_page() entries and slowing the system down to a crawl.
-----BEGIN PGP SIGNATURE-----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=zpTx
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"A fix to memory-hotplug hot-remove test to stop spamming logs with
dump_page() entries and slowing the system down to a crawl"
* tag 'linux-kselftest-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: memory-hotplug: avoid spamming logs with dump_page(), ratio limit hot-remove error test
Working on the histogram code, I found that if you dereference a char
pointer in a trace event that happens to point to user space, it can crash
the kernel, as it does no checks of that pointer. I have code coming that
will do this better, so just remove this ability to treat character
pointers in trace events as stings in the histogram.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYPH9FRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qsyhAQDKiQzVJtjfsNbIWliDQOaUwJMO9tNl
Qu5TUDmPbAA4fwD+MgYsnITPL+o/YcKQ+aMdj/wLLMKfIjhNkFY8wqdLvwg=
=CN97
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix the histogram logic from possibly crashing the kernel
Working on the histogram code, I found that if you dereference a char
pointer in a trace event that happens to point to user space, it can
crash the kernel, as it does no checks of that pointer. I have code
coming that will do this better, so just remove this ability to treat
character pointers in trace events as stings in the histogram"
* tag 'trace-v5.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Do not reference char * as a string in histograms
- Drop 'resets' as required on renesas,du
- Moving of fixed string patterns for 'properties' instead of
'patternProperties'
- Drop more redundant minItems/maxItems that we merged in the merge
window
- Indentation warning fix for sja1105
-----BEGIN PGP SIGNATURE-----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=EiRx
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Drop 'resets' as required on renesas,du
- Moving of fixed string patterns for 'properties' instead of
'patternProperties'
- Drop more redundant minItems/maxItems that we merged in the merge
window
- Indentation warning fix for sja1105
* tag 'devicetree-fixes-for-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: display: renesas,du: Make resets optional on R-Car H1
dt-bindings: Move fixed string 'patternProperties' to 'properties'
dt-bindings: More dropping redundant minItems/maxItems
dt-bindings: net: dsa: sja1105: Fix indentation warnings
- Fix instrumentation annotations for entry code
- Ensure kernel MTE state is restored correctly on resume from suspend
- Fix MTE fault from new strlen() routine
- Fallback to byte-wise accesses on initial uaccess fault
- Bump Clang requirement for BTI
- Revert ARCH_DMA_MINALIGN back to 128 bytes (shakes fist at Qualcomm)
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmDxWmcQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjND/yCACldN5Vq22ukGC+XP1XEk5XgYlepr47nwZG
x52B24Id9WHWf8Hw9C7N0TaaxJCSQ/mJ265g8GqudZ9y5BrQLjfM/YXBCt4G1y1a
5jKrAO1XUqldiO2raniitrLL7aXehjXgC6eJwKtswcWA5FDPghCH6bZmitCQC9bQ
7GD5wxoeTF6m00ykNznqxXLFAjWnAY6nHHpFZ1Af/qMqwgOifJ+FXN11C7Un6r1G
it/XHHounn736EsIDQzyHFdl1j52dlKtstmQ39TUUeHGum7PR8AyKc/J0MS92qB7
njYuRedc5adK1RRzG/MrB1HJqY5qpWzpVbpeAVuWmMTh6Kmt37sz
=+zaG
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The bulk of the diffstat consists of changes to our uaccess routines
so that they fall back to bytewise copying prior to reporting complete
failure when the initial (multi-byte) access faults.
However, the most disappointing change here is that we've had to bump
ARCH_DMA_MINALIGN back to 128 bytes thanks to Qualcomm's "Kryo" CPU,
which ended up in the MSM8996 mobile SoC. Still, at least we're now
aware of this design and one of the hardware designers confirmed the
L2 cacheline size for us.
Summary:
- Fix instrumentation annotations for entry code
- Ensure kernel MTE state is restored correctly on resume from suspend
- Fix MTE fault from new strlen() routine
- Fallback to byte-wise accesses on initial uaccess fault
- Bump Clang requirement for BTI
- Revert ARCH_DMA_MINALIGN back to 128 bytes (shakes fist at Qualcomm)"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: entry: fix KCOV suppression
arm64: entry: add missing noinstr
arm64: mte: fix restoration of GCR_EL1 from suspend
arm64: Avoid premature usercopy failure
arm64: Restrict ARM64_BTI_KERNEL to clang 12.0.0 and newer
Revert "arm64: cache: Lower ARCH_DMA_MINALIGN to 64 (L1_CACHE_BYTES)"
arm64: Add missing header <asm/smp.h> in two files
arm64: fix strlen() with CONFIG_KASAN_HW_TAGS
Ronak Doshi says:
====================
vmxnet3: upgrade to version 6
vmxnet3 emulation has recently added several new features which includes
increase in queues supported, remove power of 2 limitation on queues,
add RSS for ESP IPv6, etc. This patch series extends the vmxnet3 driver
to leverage these new features.
Compatibility is maintained using existing vmxnet3 versioning mechanism as
follows:
- new features added to vmxnet3 emulation are associated with new vmxnet3
version viz. vmxnet3 version 6.
- emulation advertises all the versions it supports to the driver.
- during initialization, vmxnet3 driver picks the highest version number
supported by both the emulation and the driver and configures emulation
to run at that version.
In particular, following changes are introduced:
Patch 1:
This patch introduces utility macros for vmxnet3 version 6 comparison
and updates Copyright information.
Patch 2:
This patch adds support to increase maximum Tx/Rx queues from 8 to 32.
Patch 3:
This patch removes the limitation of power of 2 on the queues.
Patch 4:
Uses existing get_rss_hash_opts and set_rss_hash_opts methods to add
support for ESP IPv6 RSS.
Patch 5:
This patch reports correct RSS hash type based on the type of RSS
performed.
Patch 6:
This patch updates maximum configurable mtu to 9190.
Patch 7:
With all vmxnet3 version 6 changes incorporated in the vmxnet3 driver,
with this patch, the driver can configure emulation to run at vmxnet3
version 6.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
With all vmxnet3 version 6 changes incorporated in the vmxnet3 driver,
the driver can configure emulation to run at vmxnet3 version 6, provided
the emulation advertises support for version 6.
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Acked-by: Guolin Yang <gyang@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch increases the maximum configurable mtu to 9190
to accommodate jumbo packets of overlay traffic.
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Acked-by: Guolin Yang <gyang@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As vmxnet3 supports IP/TCP/UDP RSS, this patch sets appropriate
hash type based on the type of RSS performed.
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Acked-by: Guolin Yang <gyang@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vmxnet3 version 4 added support for ESP RSS. However, only IPv4 was
supported. With vmxnet3 version 6, this patch enables RSS for ESP
IPv6 packets as well.
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Acked-by: Guolin Yang <gyang@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With version 6, vmxnet3 relaxes the restriction on queues to
be power of two. This is helpful in cases (Edge VM) where
vcpus are less than 8 and device requires more than 4 queues.
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Acked-by: Guolin Yang <gyang@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, vmxnet3 supports maximum of 8 Tx/Rx queues. With increase
in number of vcpus on a VM, to achieve better performance and utilize
idle vcpus, we need to increase the max number of queues supported.
This patch enhances vmxnet3 to support maximum of 32 Tx/Rx queues.
Increasing the Rx queues also increases the probability of distrubuting
the traffic from different flows to different queues with RSS.
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Acked-by: Guolin Yang <gyang@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
vmxnet3 is currently at version 4 and this patch initiates the
preparation to accommodate changes for upto version 6. Introduced
utility macros for vmxnet3 version 6 comparison and update Copyright
information.
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Acked-by: Guolin Yang <gyang@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, when userspace reads a datagram with a buffer that is
smaller than this datagram, the data will be truncated and only
part of it can be received by users. It doesn't seem right that
users don't know the datagram size and have to use a huge buffer
to read it to avoid the truncation.
This patch to fix it by keeping the skb in rcv queue until the
whole data is read by users. Only the last msg of the datagram
will be marked with MSG_EOR, just as TCP/SCTP does.
Note that this will work as above only when MSG_EOR is set in the
flags parameter of recvmsg(), so that it won't break any old user
applications.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
nguy/next-queue
Tony Nguyen says:
====================
1GbE Intel Wired LAN Driver Updates 2021-07-16
Vinicius Costa Gomes says:
Add support for steering traffic to specific RX queues using Flex Filters.
As the name implies, Flex Filters are more flexible than using
Layer-2, VLAN or MAC address filters, one of the reasons is that they
allow "AND" operations more easily, e.g. when the user wants to steer
some traffic based on the source MAC address and the packet ethertype.
Future work include adding support for offloading tc-u32 filters to
the hardware.
The series is divided as follows:
Patch 1/5, add the low level primitives for configuring Flex filters.
Patch 2/5 and 3/5, allow ethtool to manage Flex filters.
Patch 4/5, when specifying filters that have multiple predicates, use
Flex filters.
Patch 5/5, Adds support for exposing the i225 LEDs using the LED subsystem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The commit 9a5605505d (" bonding: Add struct bond_ipesc to manage SA") is causing
following build error when XFRM is not selected in kernel config.
lld: error: undefined symbol: xfrm_dev_state_flush
>>> referenced by bond_main.c:3453 (drivers/net/bonding/bond_main.c:3453)
>>> net/bonding/bond_main.o:(bond_netdev_event) in archive drivers/built-in.a
Fixes: 9a5605505d (" bonding: Add struct bond_ipesc to manage SA")
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
CC: Taehee Yoo <ap420073@gmail.com>
CC: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
