CineS2 V7(A) and Octopus CI S2 Pro/Advanced cards support faster TS speeds
on the card's contained stv0910 demodulator when their FPGA was updated
with a recent (>= 1.7, version number applies to all mentioned cards)
vendor firmware. Enable this faster TS speed on card port 0 (contained
demod) and parallel stv0910 connections when the card firmware is at least
1.7 or later.
Note: The mentioned cards and their demods are handled via the STV0910_PR
and STV0910_P tuner types. DuoFlex modules with such demodulators are
handled via the STV0910 (without suffix) types where such TS speed
increase doesn't technically make sense.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Tested-by: Richard Scobie <rascobie@slingshot.co.nz>
Tested-by: Helmut Auer <post@helmutauer.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add a tsspeed config option to struct stv0910_cfg which can be used by
users of the driver to set the (parallel) TS speed (higher speeds enable
support for higher bitrate transponders). If tsspeed isn't set in the
config, it'll default to a sane value.
This commit also updates the two consumers of the stv0910 driver (ngene
and ddbridge) to have a default tsspeed in their stv0910_cfg templates.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Tested-by: Richard Scobie <rascobie@slingshot.co.nz>
Tested-by: Helmut Auer <post@helmutauer.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Fixes two checkpatch warnings
WARNING: function definition argument 'xxx' should also have an identifier name
in the ddb_mci_attach() prototype definition. checkpatch keeps complaining
on the "int (**fn_set_input)" as it seems to have issues with the
ptr-to-ptr, though this probably needs fixing in checkpatch.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
In stop(), an (unlikely) out-of-bounds write error can occur when setting
the demod_in_use element indexed by state->demod to zero, as state->demod
isn't checked for being in the range of the array size of demod_in_use, and
state->demod maybe carrying the magic 0xff (demod unused) value. Prevent
this by checking state->demod not exceeding the array size before setting
the element value. To make the code a bit easier to read, replace the magic
value and the number of array elements with defines, and use them at a few
more places.
Detected by CoverityScan, CID#1468550 ("Out-of-bounds write")
Thanks to Colin for reporting the problem and providing an initial patch.
Fixes: daeeb1319e ("media: ddbridge: initial support for MCI-based MaxSX8 cards")
Reported-by: Colin Ian King <colin.king@canonical.com>
Cc: Ralph Metzler <rjkm@metzlerbros.de>
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
When the driver is configured in the "memcpy" dma-mode,
it uses vb2_vmalloc_memops, which is backed by a SLAB
allocator and so shouldn't be using GFP_DMA32.
Fix it.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Remove dependencies on HAS_DMA where a Kconfig symbol depends on another
symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST".
In most cases this other symbol is an architecture or platform specific
symbol, or PCI.
Generic symbols and drivers without platform dependencies keep their
dependencies on HAS_DMA, to prevent compiling subsystems or drivers that
cannot work anyway.
This simplifies the dependencies, and allows to improve compile-testing.
Note:
- The various VIDEOBUF*DMA* symbols had to loose their dependencies on
HAS_DMA, as they are selected by several individual drivers.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This driver hasn't been tested in a long, long time. The hardware is
ancient and pretty much obsolete. This driver also needs to be converted
to newer media frameworks (vb2!) but due to the lack of time and interest
that is unlikely to happen.
So this driver is a prime candidate for removal. If someone is interested
in working on this driver to prevent its removal, then please contact the
linux-media mailinglist.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Document what these two register calls are doing.
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Include some additional useful registers in the output.
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Currently mask is read for pci_status/ts1_status/ts2_status, but
otherwise ignored. The masks are now used to determine whether
action is warranted.
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
On Ryzen systems interrupts are occasionally missed:
cx23885: cx23885_wakeup: [ffff99b384b83c00/28] wakeup reg=5406 buf=5405
cx23885: cx23885_wakeup: [ffff99b40bf79400/31] wakeup reg=9537 buf=9536
This patch loops up to five times on wakeup, marking any buffers
found done.
Since the count register is u16, but the vb2 counter is u32, some modulo
arithmetic is used to accommodate wraparound and ensure current active
buffer is the buffer expected.
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This reverts 8b0e195314, because media-tree drivers should use the
API functions to initialize variables of type ktime_t.
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jasmin Jessich <jasmin@anw.at>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
In commit 20a63349b1 a new variable ktime_t delay has been added.
We decided to use the API functions to initialize ktime_t variables
within media-tree. Thus variable delay needs to be initialized with
ktime_set() instead of setting it directly.
Signed-off-by: Jasmin Jessich <jasmin@anw.at>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This issue was reported by a user who downloaded a corrupt saa7164
firmware, then went looking for a valid xc5000 firmware to fix the
error displayed...but the device in question has no xc5000, thus after
much effort, the wild goose chase eventually led to a support call.
The xc5000 has nothing to do with saa7164 (as far as I can tell),
so replace the string with saa7164 as well as give a meaningful
hint on the firmware mismatch.
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Kconfig Help statements are two-spaced after a single tab.
The incorrect spacing breaks menuconfig on older kernels.
Signed-off-by: Brad Love <brad@nextdimension.cc>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Replace the manual validity checks for the GPIO with the
gpio_is_valid().
In vip_gpio_reserve(), Error checking for gpio pin is not correct.
If pwr_pin = -1, It will return 0. This should be return an error.
In sta2x11_vip_init_one(), Error checking for gpio 'reset_pin'
is unnecessary. Because vip_gpio_reserve() is also checking for
valid gpio pin. So removed extra error checking for gpio 'reset_pin'.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Interrupt behavior shows that some time the frame end and frame start of
next frame is unstable and can range from several to hundreds of
micro-sec. In the case of ~10us, isr may not clear next sof interrupt
status in single handling, which prevents new interrupts from coming.
Fix this by handling all pending IRQs before exiting isr, so any abnormal
behavior results from very short interrupt status changes is protected.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Andy Yeh <andy.yeh@intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This driver depends on sony-laptop driver, but this is available
only for x86. So, add a stub function, in order to allow building
it on non-x86 too.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This was left over from the conversion to VB2, where the call was
getting invoked both in buffer_queue and start_streaming, which
was intermittently causing invalid opcodes on the VBI RISC queue.
This change effectively mirrors the exact same change Hans Verkuil
made in cx88-video.c in commit 389208e117 ("[media] cx88:
remove leftover start_video_dma() call").
Thanks to Daniel Glöckner for spotting the actual bug after I spent
several days trying to chase down the issue.
Fixes: 389208e117 ("[media] cx88: remove leftover start_video_dma() call")
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Thanks-to: Daniel Glöckner <daniel-gl@gmx.net>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The method dvb_frontend_ops::get_frontend_algo() is defined as
returning an 'enum dvbfe_algo', but the implementation in this
driver returns an 'int'.
Fix this by returning 'enum dvbfe_algo' on drivers.
[mchehab+samsung@kernel.org: merge similar patches and patch
ddbridge-mci.c the same way]
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Commit ee93340e98 ("media: ngene: deduplicate I2C adapter evaluation")
added a helper to evaluate the I2C adapter to be used for demod/tuner
attachment based on the given ngene_channel, and that helper is used in
many attach functions to initialise the i2c_adapter variable. However,
for some reason in tuner_attach_stv6110() and demod_attach_stv0900(), the
adapter evaluation wasn't removed as in all other functions. Fix (or
finalize, even) the helper use by cleaning up the superfluous I2C adapter
evaluation leftover in these two functions.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
As pointed by ktest:
>> drivers/media//pci/pt1/pt1.c:1433:5: warning: "CONFIG_PM_SLEEP" is not defined, evaluates to 0 [-Wundef]
#if CONFIG_PM_SLEEP
^~~~~~~~~~~~~~~
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
As warned by smatch:
drivers/media/pci/pt1/pt1.c:213 config_demod() error: strncmp() '"tc90522sat"' too small (11 vs 20)
Use the same strncmp() syntax as pt1_init_frontends() does.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
As described in Document/timers/timers-howto.txt,
hrtimer-based delay should be used for small sleeps.
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Without this patch, re-loading of the module was required after resume.
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
earth-pt1 was a monolithic module and included demod/tuner drivers.
This patch removes those FE parts and attach demod/tuner i2c drivers.
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
When capturing at yuv410p, sg_next was called too many times when chroma is
false, eventually returning NULL. This patch does fix this for my hardware.
Signed-off-by: Samuel Williams <sam8641@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Such check is already there at the routine. So, no need to
repeat it outside.
Cc: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Three really tiny minors in this single commit which all on their own
would just clutter up the commit history unnecessarily:
* ddbridge-regs.h is lacking an include guard. Add it.
* Fix an unnecessary NULL initialisation in ddbridge-ci. The declaration
of the ci struct ptr is immediately followed by kzalloc().
* Clarify that the CXD2099AR is a Sony device in the cxd2099 driver at a
few places including Kconfig.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Acked-by: Jasmin Jessich <jasmin@anw.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Convert the driver to allow its usage with the new I2C
binding way.
Please notice that this patch doesn't convert the
callers to bind to it using the new way.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Set DDBRIDGE_VERSION in ddbridge.h to 0.9.33-integrated to reflect the
updated driver.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add needed logic into dvb_input_attach(), ddb_port_probe() and
ddb_ports_init() to initialize and support these new cards.
Picked up from the upstream dddvb-0.9.33 release.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add PCI IDs and ddb_info for the new MCI-based MaxSX8 cards. Also add
needed defines so the cards can be hooked up into ddbridge's probe and
attach handling.
Picked up from the upstream dddvb-0.9.33 release.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Implement frontend attachment as ddb_fe_attach_mci() into the
ddbridge-max module. The MaxSX8 MCI cards are part of the Max card series
and make use of the LNB controller driven by the already existing lnb
functionality, so here's where this code belongs to.
Picked up from the upstream dddvb-0.9.33 release.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This adds initial support for the new MCI-based (micro-code interface)
DD cards, with the first one being the MaxSX8 eight-tuner DVB-S/S2/S2X
PCIe card. The MCI is basically a generalized interface implemented in
the card's FPGA firmware and usable for all kind of cards, without the
need to implement any demod/tuner drivers as this interface "hides" any
I2C interface to the actual ICs, in other words any required driver is
implemented in the card firmware.
At this stage, the MCI interface is quite rudimentary with things like
signal statistics reporting missing, but is already working to serve
DVB streams to DVB applications. Missing functionality will be enabled
over time.
This implements only the ddbridge-mci sub-object and hooks it up to the
Makefile so the object gets build. The upcoming commits hook this module
into all other ddbridge parts where required, including device IDs etc.
Picked up from the upstream dddvb-0.9.33 release.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The Octopus V3 and Octopus Mini devices support set up of a dummy tuner
mode on port 0 that will deliver a continuous data stream of 125MBytes
per second while raising IRQs and filling the DMA buffers, which comes
handy for some stress, PCIe link and IRQ handling testing. The dummy
frontend is registered using dvb_dummy_fe's QAM dummy frontend. Set
ddbridge.dummy_tuner to 1 to enable this on the supported cards.
Picked up from the upstream dddvb-0.9.33 release.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Make the number of DMA buffers and their size configurable using module
parameters. Being able to set these to a higher number might help on
busy systems when handling overall high data rates without having to
edit the driver sources and recompile things.
Picked up from the upstream dddvb-0.9.33 release.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Currently, /sys/class/ddbridgeX/devid always reports 0 due to devid not
being set at all. Set the devid field alongside while storing all other
hardware ID data.
Picked up from the upstream dddvb-0.9.33 release.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
A 188 byte gap has to be left between the writer and the consumer. This
requires 2*188 bytes available to be able to write to the output buffers.
So, change ddb_output_free() to report free bytes according to this rule.
Picked up from the upstream dddvb-0.9.33 release.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Make sure to save IRQ states before taking the dma lock, as already done
in it's input_work() counterpart.
Picked up from the upstream dddvb-0.9.33 release.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Improve IRQ handling in the separated MSG/I2C and IO/TSDATA handlers by
applying a mask for recognized bits immediately upon reading the IRQ mask
from the hardware, so only the bits/IRQs that actually were set will be
acked.
Picked up from the upstream dddvb-0.9.33 release.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Currently, each IRQ requires one IRQ_HANDLE() line to call each IRQ
handler that was set up. Add a IRQ_HANDLE_NIBBLE() and IRQ_HANDLE_BYTE()
macro to call all handlers in blocks of four (_NIBBLE) or eight (_BYTE)
handlers at a time, to make this construct more compact.
Picked up from the upstream dddvb-0.9.33 release.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Introduce the ddb_irq_set() helper function (along with a matching
prototype in ddbridge.h) to improve the set up of the IRQ handlers
and handler_data, and rework storing this data into the ddb_link
using a new ddb_irq struct. This also does the necessary rework
of affected variables. And while at it, always do queue_work in
input_handler() as there's not much of a difference to directly
calling input_work if there's no ptr at input->redi, or queueing
this call.
Picked up from the upstream dddvb-0.9.33 release.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Instead of trying to manage IRQ numbers on itself, utilise the
pci_irq_vector() function to do this, which will take care of correct IRQ
numbering for MSI and non-MSI IRQs. While at it, request and enable MSI-X
interrupts for hardware (boards and cards) that support this.
Picked up from the upstream dddvb-0.9.33 release.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Introduce the ddb_msi_exit() helper to be used for cleaning up previously
allocated MSI IRQ vectors. Deduplicates code and makes things look
cleaner as for all cleanup work the CONFIG_PCI_MSI ifdeffery is only
needed in the helper now. Also, replace the call to the deprecated
pci_disable_msi() function with pci_free_irq_vectors().
Picked up from the upstream dddvb-0.9.33 release.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
