introduced during this -rc cycle or which were considered inappropriate
for a backport.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZIdw7QAKCRDdBJ7gKXxA
jki4AQCygi1UoqVPq4N/NzJbv2GaNDXNmcJIoLvPpp3MYFhucAEAtQNzAYO9z6CT
iLDMosnuh+1KLTaKNGL5iak3NAxnxQw=
=mTdI
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-06-12-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"19 hotfixes. 14 are cc:stable and the remainder address issues which
were introduced during this development cycle or which were considered
inappropriate for a backport"
* tag 'mm-hotfixes-stable-2023-06-12-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
zswap: do not shrink if cgroup may not zswap
page cache: fix page_cache_next/prev_miss off by one
ocfs2: check new file size on fallocate call
mailmap: add entry for John Keeping
mm/damon/core: fix divide error in damon_nr_accesses_to_accesses_bp()
epoll: ep_autoremove_wake_function should use list_del_init_careful
mm/gup_test: fix ioctl fail for compat task
nilfs2: reject devices with insufficient block count
ocfs2: fix use-after-free when unmounting read-only filesystem
lib/test_vmalloc.c: avoid garbage in page array
nilfs2: fix possible out-of-bounds segment allocation in resize ioctl
riscv/purgatory: remove PGO flags
powerpc/purgatory: remove PGO flags
x86/purgatory: remove PGO flags
kexec: support purgatories with .text.hot sections
mm/uffd: allow vma to merge as much as possible
mm/uffd: fix vma operation where start addr cuts part of vma
radix-tree: move declarations to header
nilfs2: fix incomplete buffer cleanup in nilfs_btnode_abort_change_key()
Add error handling into igb_set_eeprom() function, in case
nvm.ops.read() fails just quit with error code asap.
Fixes: 9d5c824399 ("igb: PCI-Express 82575 Gigabit Ethernet driver")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Guarantee that when probe() is run again, PTM and PCI busmaster will be
in the same state as it was if the driver was never loaded.
Avoid an i225/i226 hardware issue that PTM requests can be made even
though PCI bus mastering is not enabled. These unexpected PTM requests
can crash some systems.
So, "force" disable PTM and busmastering before removing the driver,
so they can be re-enabled in the right order during probe(). This is
more like a workaround and should be applicable for i225 and i226, in
any platform.
Fixes: 1b5d73fb86 ("igc: Enable PCIe PTM")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Before storing a page, zswap first checks if the number of stored pages
exceeds the limit specified by memory.zswap.max, for each cgroup in the
hierarchy. If this limit is reached or exceeded, then zswap shrinking is
triggered and short-circuits the store attempt.
However, since the zswap's LRU is not memcg-aware, this can create the
following pathological behavior: the cgroup whose zswap limit is 0 will
evict pages from other cgroups continually, without lowering its own zswap
usage. This means the shrinking will continue until the need for swap
ceases or the pool becomes empty.
As a result of this, we observe a disproportionate amount of zswap
writeback and a perpetually small zswap pool in our experiments, even
though the pool limit is never hit.
More generally, a cgroup might unnecessarily evict pages from other
cgroups before we drive the memcg back below its limit.
This patch fixes the issue by rejecting zswap store attempt without
shrinking the pool when obj_cgroup_may_zswap() returns false.
[akpm@linux-foundation.org: fix return of unintialized value]
[akpm@linux-foundation.org: s/ENOSPC/ENOMEM/]
Link: https://lkml.kernel.org/r/20230530222440.2777700-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20230530232435.3097106-1-nphamcs@gmail.com
Fixes: f4840ccfca ("zswap: memcg accounting")
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ackerley Tng reported an issue with hugetlbfs fallocate here[1]. The
issue showed up after the conversion of hugetlb page cache lookup code to
use page_cache_next_miss. Code in hugetlb fallocate, userfaultfd and GUP
is now using page_cache_next_miss to determine if a page is present the
page cache. The following statement is used.
present = page_cache_next_miss(mapping, index, 1) != index;
There are two issues with page_cache_next_miss when used in this way.
1) If the passed value for index is equal to the 'wrap-around' value,
the same index will always be returned. This wrap-around value is 0,
so 0 will be returned even if page is present at index 0.
2) If there is no gap in the range passed, the last index in the range
will be returned. When passed a range of 1 as above, the passed
index value will be returned even if the page is present.
The end result is the statement above will NEVER indicate a page is
present in the cache, even if it is.
As noted by Ackerley in [1], users can see this by hugetlb fallocate
incorrectly returning EEXIST if pages are already present in the file. In
addition, hugetlb pages will not be included in core dumps if they need to
be brought in via GUP. userfaultfd UFFDIO_COPY also uses this code and
will not notice pages already present in the cache. It may try to
allocate a new page and potentially return ENOMEM as opposed to EEXIST.
Both page_cache_next_miss and page_cache_prev_miss have similar issues.
Fix by:
- Check for index equal to 'wrap-around' value and do not exit early.
- If no gap is found in range, return index outside range.
- Update function description to say 'wrap-around' value could be
returned if passed as index.
[1] https://lore.kernel.org/linux-mm/cover.1683069252.git.ackerleytng@google.com/
Link: https://lkml.kernel.org/r/20230602225747.103865-2-mike.kravetz@oracle.com
Fixes: d0ce0e47b3 ("mm/hugetlb: convert hugetlb fault paths to use alloc_hugetlb_folio()")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When changing a file size with fallocate() the new size isn't being
checked. In particular, the FSIZE ulimit isn't being checked, which makes
fstest generic/228 fail. Simply adding a call to inode_newsize_ok() fixes
this issue.
Link: https://lkml.kernel.org/r/20230529152645.32680-1-lhenriques@suse.de
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Mark Fasheh <mark@fasheh.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
autoremove_wake_function uses list_del_init_careful, so should epoll's
more aggressive variant. It only doesn't because it was copied from an
older wait.c rather than the most recent.
[bsegall@google.com: add comment]
Link: https://lkml.kernel.org/r/xm26bki0ulsr.fsf_-_@google.com
Link: https://lkml.kernel.org/r/xm26pm6hvfer.fsf@google.com
Fixes: a16ceb1396 ("epoll: autoremove wakers even more aggressively")
Signed-off-by: Ben Segall <bsegall@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When tools/testing/selftests/mm/gup_test.c is compiled as 32bit, then run
on arm64 kernel, it reports "ioctl: Inappropriate ioctl for device".
Fix it by filling compat_ioctl in gup_test_fops
Link: https://lkml.kernel.org/r/20230526022125.175728-1-haibo.li@mediatek.com
Signed-off-by: Haibo Li <haibo.li@mediatek.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The current sanity check for nilfs2 geometry information lacks checks for
the number of segments stored in superblocks, so even for device images
that have been destructively truncated or have an unusually high number of
segments, the mount operation may succeed.
This causes out-of-bounds block I/O on file system block reads or log
writes to the segments, the latter in particular causing
"a_ops->writepages" to repeatedly fail, resulting in sync_inodes_sb() to
hang.
Fix this issue by checking the number of segments stored in the superblock
and avoiding mounting devices that can cause out-of-bounds accesses. To
eliminate the possibility of overflow when calculating the number of
blocks required for the device from the number of segments, this also adds
a helper function to calculate the upper bound on the number of segments
and inserts a check using it.
Link: https://lkml.kernel.org/r/20230526021332.3431-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+7d50f1e54a12ba3aeae2@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=7d50f1e54a12ba3aeae2
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It's trivial to trigger a use-after-free bug in the ocfs2 quotas code using
fstest generic/452. After a read-only remount, quotas are suspended and
ocfs2_mem_dqinfo is freed through ->ocfs2_local_free_info(). When unmounting
the filesystem, an UAF access to the oinfo will eventually cause a crash.
BUG: KASAN: slab-use-after-free in timer_delete+0x54/0xc0
Read of size 8 at addr ffff8880389a8208 by task umount/669
...
Call Trace:
<TASK>
...
timer_delete+0x54/0xc0
try_to_grab_pending+0x31/0x230
__cancel_work_timer+0x6c/0x270
ocfs2_disable_quotas.isra.0+0x3e/0xf0 [ocfs2]
ocfs2_dismount_volume+0xdd/0x450 [ocfs2]
generic_shutdown_super+0xaa/0x280
kill_block_super+0x46/0x70
deactivate_locked_super+0x4d/0xb0
cleanup_mnt+0x135/0x1f0
...
</TASK>
Allocated by task 632:
kasan_save_stack+0x1c/0x40
kasan_set_track+0x21/0x30
__kasan_kmalloc+0x8b/0x90
ocfs2_local_read_info+0xe3/0x9a0 [ocfs2]
dquot_load_quota_sb+0x34b/0x680
dquot_load_quota_inode+0xfe/0x1a0
ocfs2_enable_quotas+0x190/0x2f0 [ocfs2]
ocfs2_fill_super+0x14ef/0x2120 [ocfs2]
mount_bdev+0x1be/0x200
legacy_get_tree+0x6c/0xb0
vfs_get_tree+0x3e/0x110
path_mount+0xa90/0xe10
__x64_sys_mount+0x16f/0x1a0
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
Freed by task 650:
kasan_save_stack+0x1c/0x40
kasan_set_track+0x21/0x30
kasan_save_free_info+0x2a/0x50
__kasan_slab_free+0xf9/0x150
__kmem_cache_free+0x89/0x180
ocfs2_local_free_info+0x2ba/0x3f0 [ocfs2]
dquot_disable+0x35f/0xa70
ocfs2_susp_quotas.isra.0+0x159/0x1a0 [ocfs2]
ocfs2_remount+0x150/0x580 [ocfs2]
reconfigure_super+0x1a5/0x3a0
path_mount+0xc8a/0xe10
__x64_sys_mount+0x16f/0x1a0
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
Link: https://lkml.kernel.org/r/20230522102112.9031-1-lhenriques@suse.de
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Tested-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It turns out that alloc_pages_bulk_array() does not treat the page_array
parameter as an output parameter, but rather reads the array and skips any
entries that have already been allocated.
This is somewhat unexpected and breaks this test, as we allocate the pages
array uninitialised on the assumption it will be overwritten.
As a result, the test was referencing uninitialised data and causing the
PFN to not be valid and thus a WARN_ON() followed by a null pointer deref
and panic.
In addition, this is an array of pointers not of struct page objects, so we
need only allocate an array with elements of pointer size.
We solve both problems by simply using kcalloc() and referencing
sizeof(struct page *) rather than sizeof(struct page).
Link: https://lkml.kernel.org/r/20230524082424.10022-1-lstoakes@gmail.com
Fixes: 869cb29a61 ("lib/test_vmalloc.c: add vm_map_ram()/vm_unmap_ram() test case")
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Syzbot reports that in its stress test for resize ioctl, the log writing
function nilfs_segctor_do_construct hits a WARN_ON in
nilfs_segctor_truncate_segments().
It turned out that there is a problem with the current implementation of
the resize ioctl, which changes the writable range on the device (the
range of allocatable segments) at the end of the resize process.
This order is necessary for file system expansion to avoid corrupting the
superblock at trailing edge. However, in the case of a file system
shrink, if log writes occur after truncating out-of-bounds trailing
segments and before the resize is complete, segments may be allocated from
the truncated space.
The userspace resize tool was fine as it limits the range of allocatable
segments before performing the resize, but it can run into this issue if
the resize ioctl is called alone.
Fix this issue by changing nilfs_sufile_resize() to update the range of
allocatable segments immediately after successful truncation of segment
space in case of file system shrink.
Link: https://lkml.kernel.org/r/20230524094348.3784-1-konishi.ryusuke@gmail.com
Fixes: 4e33f9eab0 ("nilfs2: implement resize ioctl")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+33494cd0df2ec2931851@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/0000000000005434c405fbbafdc5@google.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If profile-guided optimization is enabled, the purgatory ends up with
multiple .text sections. This is not supported by kexec and crashes the
system.
Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-4-b05c520b7296@chromium.org
Fixes: 930457057a ("kernel/kexec_file.c: split up __kexec_load_puragory")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Cc: <stable@vger.kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If profile-guided optimization is enabled, the purgatory ends up with
multiple .text sections. This is not supported by kexec and crashes the
system.
Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-3-b05c520b7296@chromium.org
Fixes: 930457057a ("kernel/kexec_file.c: split up __kexec_load_puragory")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: <stable@vger.kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If profile-guided optimization is enabled, the purgatory ends up with
multiple .text sections. This is not supported by kexec and crashes the
system.
Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-2-b05c520b7296@chromium.org
Fixes: 930457057a ("kernel/kexec_file.c: split up __kexec_load_puragory")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Cc: <stable@vger.kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "kexec: Fix kexec_file_load for llvm16 with PGO", v7.
When upreving llvm I realised that kexec stopped working on my test
platform.
The reason seems to be that due to PGO there are multiple .text sections
on the purgatory, and kexec does not supports that.
This patch (of 4):
Clang16 links the purgatory text in two sections when PGO is in use:
[ 1] .text PROGBITS 0000000000000000 00000040
00000000000011a1 0000000000000000 AX 0 0 16
[ 2] .rela.text RELA 0000000000000000 00003498
0000000000000648 0000000000000018 I 24 1 8
...
[17] .text.hot. PROGBITS 0000000000000000 00003220
000000000000020b 0000000000000000 AX 0 0 1
[18] .rela.text.hot. RELA 0000000000000000 00004428
0000000000000078 0000000000000018 I 24 17 8
And both of them have their range [sh_addr ... sh_addr+sh_size] on the
area pointed by `e_entry`.
This causes that image->start is calculated twice, once for .text and
another time for .text.hot. The second calculation leaves image->start
in a random location.
Because of this, the system crashes immediately after:
kexec_core: Starting new kernel
Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-0-b05c520b7296@chromium.org
Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-1-b05c520b7296@chromium.org
Fixes: 930457057a ("kernel/kexec_file.c: split up __kexec_load_puragory")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Ross Zwisler <zwisler@google.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Rix <trix@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We used to not pass in the pgoff correctly when register/unregister uffd
regions, it caused incorrect behavior on vma merging and can cause
mergeable vmas being separate after ioctls return.
For example, when we have:
vma1(range 0-9, with uffd), vma2(range 10-19, no uffd)
Then someone unregisters uffd on range (5-9), it should logically become:
vma1(range 0-4, with uffd), vma2(range 5-19, no uffd)
But with current code we'll have:
vma1(range 0-4, with uffd), vma3(range 5-9, no uffd), vma2(range 10-19, no uffd)
This patch allows such merge to happen correctly before ioctl returns.
This behavior seems to have existed since the 1st day of uffd. Since
pgoff for vma_merge() is only used to identify the possibility of vma
merging, meanwhile here what we did was always passing in a pgoff smaller
than what we should, so there should have no other side effect besides not
merging it. Let's still tentatively copy stable for this, even though I
don't see anything will go wrong besides vma being split (which is mostly
not user visible).
Link: https://lkml.kernel.org/r/20230517190916.3429499-3-peterx@redhat.com
Fixes: 86039bd3b4 ("userfaultfd: add new syscall to provide memory externalization")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/uffd: Fix vma merge/split", v2.
This series contains two patches that fix vma merge/split for userfaultfd
on two separate issues.
Patch 1 fixes a regression since 6.1+ due to something we overlooked when
converting to maple tree apis. The plan is we use patch 1 to replace the
commit "2f628010799e (mm: userfaultfd: avoid passing an invalid range to
vma_merge())" in mm-hostfixes-unstable tree if possible, so as to bring
uffd vma operations back aligned with the rest code again.
Patch 2 fixes a long standing issue that vma can be left unmerged even if
we can for either uffd register or unregister.
Many thanks to Lorenzo on either noticing this issue from the assert
movement patch, looking at this problem, and also provided a reproducer on
the unmerged vma issue [1].
[1] https://gist.github.com/lorenzo-stoakes/a11a10f5f479e7a977fc456331266e0e
This patch (of 2):
It seems vma merging with uffd paths is broken with either
register/unregister, where right now we can feed wrong parameters to
vma_merge() and it's found by recent patch which moved asserts upwards in
vma_merge() by Lorenzo Stoakes:
https://lore.kernel.org/all/ZFunF7DmMdK05MoF@FVFF77S0Q05N.cambridge.arm.com/
It's possible that "start" is contained within vma but not clamped to its
start. We need to convert this into either "cannot merge" case or "can
merge" case 4 which permits subdivision of prev by assigning vma to prev.
As we loop, each subsequent VMA will be clamped to the start.
This patch will eliminate the report and make sure vma_merge() calls will
become legal again.
One thing to mention is that the "Fixes: 29417d292bd0" below is there only
to help explain where the warning can start to trigger, the real commit to
fix should be 69dbe6daf1. Commit 29417d292b helps us to identify the
issue, but unfortunately we may want to keep it in Fixes too just to ease
kernel backporters for easier tracking.
Link: https://lkml.kernel.org/r/20230517190916.3429499-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20230517190916.3429499-2-peterx@redhat.com
Fixes: 69dbe6daf1 ("userfaultfd: use maple tree iterator to iterate VMAs")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Closes: https://lore.kernel.org/all/ZFunF7DmMdK05MoF@FVFF77S0Q05N.cambridge.arm.com/
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The xarray.c file contains the only call to radix_tree_node_rcu_free(),
and it comes with its own extern declaration for it. This means the
function definition causes a missing-prototype warning:
lib/radix-tree.c:288:6: error: no previous prototype for 'radix_tree_node_rcu_free' [-Werror=missing-prototypes]
Instead, move the declaration for this function to a new header that can
be included by both, and do the same for the radix_tree_node_cachep
variable that has the same underlying problem but does not cause a warning
with gcc.
[zhangpeng.00@bytedance.com: fix building radix tree test suite]
Link: https://lkml.kernel.org/r/20230521095450.21332-1-zhangpeng.00@bytedance.com
Link: https://lkml.kernel.org/r/20230516194212.548910-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A syzbot fault injection test reported that nilfs_btnode_create_block, a
helper function that allocates a new node block for b-trees, causes a
kernel BUG for disk images where the file system block size is smaller
than the page size.
This was due to unexpected flags on the newly allocated buffer head, and
it turned out to be because the buffer flags were not cleared by
nilfs_btnode_abort_change_key() after an error occurred during a b-tree
update operation and the buffer was later reused in that state.
Fix this issue by using nilfs_btnode_delete() to abandon the unused
preallocated buffer in nilfs_btnode_abort_change_key().
Link: https://lkml.kernel.org/r/20230513102428.10223-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+b0a35a5c1f7e846d3b09@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/000000000000d1d6c205ebc4d512@google.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A recent commit gated the core dumping task exit logic on current->flags
remaining consistent in terms of PF_{IO,USER}_WORKER at task exit time.
This exposed a problem with the io-wq handling of that, which explicitly
clears PF_IO_WORKER before calling do_exit().
The reasons for this manual clear of PF_IO_WORKER is historical, where
io-wq used to potentially trigger a sleep on exit. As the io-wq thread
is exiting, it should not participate any further accounting. But these
days we don't need to rely on current->flags anymore, so we can safely
remove the PF_IO_WORKER clearing.
Reported-by: Zorro Lang <zlang@redhat.com>
Reported-by: Dave Chinner <david@fromorbit.com>
Link: https://lore.kernel.org/all/ZIZSPyzReZkGBEFy@dread.disaster.area/
Fixes: f9010dbdce ("fork, vhost: Use CLONE_THREAD to fix freezer/ps regression")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=ABpK
-----END PGP SIGNATURE-----
Merge tag 'for-6.4-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A more fixes and regression fixes:
- in subpage mode, fix crash when repairing metadata at the end of
a stripe
- properly enable async discard when remounting from read-only to
read-write
- scrub regression fixes:
- respect read-only scrub when attempting to do a repair
- fix reporting of found errors, the stats don't get properly
accounted after a stripe repair"
* tag 'for-6.4-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: scrub: also report errors hit during the initial read
btrfs: scrub: respect the read-only flag during repair
btrfs: properly enable async discard when switching from RO->RW
btrfs: subpage: fix a crash in metadata repair path
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
commit 03c835f498 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some of MediaTek's Filogic SoCs come with built-in gigabit Ethernet
PHYs which require calibration data from the SoC's efuse.
Despite the similar design the driver doesn't share any code with the
existing mediatek-ge.c.
Add support for such PHYs by introducing a new driver with basic
support for MediaTek SoCs MT7981 and MT7988 built-in 1GE PHYs.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
1) Embedded CPU Virtual Functions
2) Lightweight local SFs
Daniel Jurgens says:
====================
Embedded CPU Virtual Functions
This series enables the creation of virtual functions on Bluefield (the
embedded CPU platform). Embedded CPU virtual functions (EC VFs). EC VF
creation, deletion and management interfaces are the same as those for
virtual functions in a server with a Connect-X NIC.
When using EC VFs on the ARM the creation of virtual functions on the
host system is still supported. Host VFs eswitch vports occupy a range
of 1..max_vfs, the EC VF vport range is max_vfs+1..max_ec_vfs.
Every function (PF, ECPF, VF, EC VF, and subfunction) has a function ID
associated with it. Prior to this series the function ID and the eswitch
vport were the same. That is no longer the case, the EC VF function ID
range is 1..max_ec_vfs. When querying or setting the capabilities of an
EC VF function an new bit must be set in the query/set HCA cap
structure.
This is a high level overview of the changes made:
- Allocate vports for EC VFs if they are enabled.
- Create representors and devlink ports for the EC VF vports.
- When querying/setting HCA caps by vport break the assumption
that function ID is the same a vport number and adjust
accordingly.
- Create a new type of page, so that when SRIOV on the ARM is
disabled, but remains enabled on the host, the driver can
wait for the correct pages.
- Update SRIOV code to support EC VF creation/deletion.
===================
Lightweight local SFs:
Last 3 patches form Shay Drory:
SFs are heavy weight and by default they come with the full package of
ConnectX features. Usually users want specialized SFs for one specific
purpose and using devlink users will almost always override the set of
advertises features of an SF and reload it.
Shay Drory says:
================
In order to avoid the wasted time and resources on the reload, local SFs
will probe without any auxiliary sub-device, so that the SFs can be
configured prior to its full probe.
The defaults of the enable_* devlink params of these SFs are set to
false.
Usage example:
Create SF:
$ devlink port add pci/0000:08:00.0 flavour pcisf pfnum 0 sfnum 11
$ devlink port function set pci/0000:08:00.0/32768 \
hw_addr 00:00:00:00:00:11 state active
Enable ETH auxiliary device:
$ devlink dev param set auxiliary/mlx5_core.sf.1 \
name enable_eth value true cmode driverinit
Now, in order to fully probe the SF, use devlink reload:
$ devlink dev reload auxiliary/mlx5_core.sf.1
At this point the user have SF devlink instance with auxiliary device
for the Ethernet functionality only.
================
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmSD1KUACgkQSD+KveBX
+j5JMwf/SGo0DwXm0GTu+RlUmoUpCYG40QjJwNwJ9WUNIB/zMpnGrx59dtdhuVUb
3gD8T9MVT08NXjQIzQReAZu9hm9MvM6jvTnUG++fFyjjlHuI/9hXWBgz1aSPcQOC
ZR2ZHuFZsTTRWNe3JU5v9tuHOE0c6xZBAzPdDU3Lib0LvhIbZGK2eiSb11RIGU3V
FTUskLUPMo5ObUNS55lgcTFquK90Qy41LUv0DX3MpbOY/YnDBiycikopwDoYtYQ6
9/kOM+VOprW+BgalLyGHJ77BDg7O/k1ZxnL6J7mGn7tAhOkKX5+06xGfZnEifI2F
nTuXYI5O8TDBdZYpmO+sBOh+SVyUrg==
=H9kD
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2023-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
mlx5-updates-2023-06-09
1) Embedded CPU Virtual Functions
2) Lightweight local SFs
Daniel Jurgens says:
====================
Embedded CPU Virtual Functions
This series enables the creation of virtual functions on Bluefield (the
embedded CPU platform). Embedded CPU virtual functions (EC VFs). EC VF
creation, deletion and management interfaces are the same as those for
virtual functions in a server with a Connect-X NIC.
When using EC VFs on the ARM the creation of virtual functions on the
host system is still supported. Host VFs eswitch vports occupy a range
of 1..max_vfs, the EC VF vport range is max_vfs+1..max_ec_vfs.
Every function (PF, ECPF, VF, EC VF, and subfunction) has a function ID
associated with it. Prior to this series the function ID and the eswitch
vport were the same. That is no longer the case, the EC VF function ID
range is 1..max_ec_vfs. When querying or setting the capabilities of an
EC VF function an new bit must be set in the query/set HCA cap
structure.
This is a high level overview of the changes made:
- Allocate vports for EC VFs if they are enabled.
- Create representors and devlink ports for the EC VF vports.
- When querying/setting HCA caps by vport break the assumption
that function ID is the same a vport number and adjust
accordingly.
- Create a new type of page, so that when SRIOV on the ARM is
disabled, but remains enabled on the host, the driver can
wait for the correct pages.
- Update SRIOV code to support EC VF creation/deletion.
===================
Lightweight local SFs:
Last 3 patches form Shay Drory:
SFs are heavy weight and by default they come with the full package of
ConnectX features. Usually users want specialized SFs for one specific
purpose and using devlink users will almost always override the set of
advertises features of an SF and reload it.
Shay Drory says:
================
In order to avoid the wasted time and resources on the reload, local SFs
will probe without any auxiliary sub-device, so that the SFs can be
configured prior to its full probe.
The defaults of the enable_* devlink params of these SFs are set to
false.
Usage example:
Create SF:
$ devlink port add pci/0000:08:00.0 flavour pcisf pfnum 0 sfnum 11
$ devlink port function set pci/0000:08:00.0/32768 \
hw_addr 00:00:00:00:00:11 state active
Enable ETH auxiliary device:
$ devlink dev param set auxiliary/mlx5_core.sf.1 \
name enable_eth value true cmode driverinit
Now, in order to fully probe the SF, use devlink reload:
$ devlink dev reload auxiliary/mlx5_core.sf.1
At this point the user have SF devlink instance with auxiliary device
for the Ethernet functionality only.
================
Eric Dumazet says:
====================
tcp: tx path fully headless
This series completes transition of TCP stack tx path
to headless packets : All payload now reside in page frags,
never in skb->head.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Now all tcp_stream_alloc_skb() callers pass @size == 0, we can
remove this parameter.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now all skbs in write queue do not contain any payload in skb->head,
we can remove some dead code.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_send_syn_data() is the last component in TCP transmit
path to put payload in skb->head.
Switch it to use page frags, so that we can remove dead
code later.
This allows to put more payload than previous implementation.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski says:
====================
net: support extack in dump and simplify ethtool uAPI
Ethtool currently requires header nest to be always present even if
it doesn't have to carry any attr for a given request. This inflicts
unnecessary pain on the users.
What makes it worse is that extack was not working in dump's ->start()
callback. Address both of those issues.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ethtool currently requires a header nest (which is used to carry
the common family options) in all requests including dumps.
$ cli.py --spec netlink/specs/ethtool.yaml --dump channels-get
lib.ynl.NlError: Netlink error: Invalid argument
nl_len = 64 (48) nl_flags = 0x300 nl_type = 2
error: -22 extack: {'msg': 'request header missing'}
$ cli.py --spec netlink/specs/ethtool.yaml --dump channels-get \
--json '{"header":{}}'; )
[{'combined-count': 1,
'combined-max': 1,
'header': {'dev-index': 2, 'dev-name': 'enp1s0'}}]
Requiring the header nest to always be there may seem nice
from the consistency perspective, but it's not serving any
practical purpose. We shouldn't burden the user like this.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 4a19edb60d ("netlink: Pass extack to dump handlers")
added extack support to netlink dumps. It was focused on rtnl
and since rtnl does not use ->start(), ->done() callbacks
it ignored those. Genetlink on the other hand uses ->start()
extensively, for parsing and input validation.
Pass the extact in via struct netlink_dump_control and link
it to cb for the time of ->start(). Both struct netlink_dump_control
and extack itself live on the stack so we can't keep the same
extack for the duration of the dump. This means that the extack
visible in ->start() and each ->dump() callbacks will be different.
Corner cases like reporting a warning message in DONE across dump
calls are still not supported.
We could put the extack (for dumps) in the socket struct,
but layering makes it slightly awkward (extack pointer is decided
before the DO / DUMP split).
The genetlink dump error extacks are now surfaced:
$ cli.py --spec netlink/specs/ethtool.yaml --dump channels-get
lib.ynl.NlError: Netlink error: Invalid argument
nl_len = 64 (48) nl_flags = 0x300 nl_type = 2
error: -22 extack: {'msg': 'request header missing'}
Previously extack was missing:
$ cli.py --spec netlink/specs/ethtool.yaml --dump channels-get
lib.ynl.NlError: Netlink error: Invalid argument
nl_len = 36 (20) nl_flags = 0x100 nl_type = 2
error: -22
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski says:
====================
tools: ynl: generate code for the ethtool family
And finally ethtool support. Thanks to Stan's work the ethtool family
spec is quite complete, so there is a lot of operations to support.
I chickened out of stats-get support, they require at the very least
type-value support on a u64 scalar. Type-value is an arrangement where
a u16 attribute is encoded directly in attribute type. Code gen can
support this if the inside is a nest, we just throw in an extra
field into that nest to carry the attr type. But a little more coding
is needed to for a scalar, because first we need to turn the scalar
into a struct with one member, then we can add the attr type.
Other than that ethtool required event support (notification which
does not share contents with any GET), but the previous series
already added that to the codegen.
I haven't tested all the ops here, and a few I tried seem to work.
====================
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Configuring / reading ring sizes and counts is a fairly common
operation for ethtool netlink. Present a sample doing that with
YNL:
$ ./ethtool
Channels:
enp1s0: combined 1
eni1np1: combined 1
eni2np1: combined 1
Rings:
enp1s0: rx 256 tx 256
eni1np1: rx 0 tx 0
eni2np1: rx 0 tx 0
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Generate the protocol code for ethtool. Skip the stats
for now, they are the only outlier in terms of complexity.
Stats are a sort-of semi-polymorphic (attr space of a nest
depends on value of another attr) or a type-value-scalar,
depending on how one wants to look at it...
A challenge for another time.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pad is a separate type. Even though in practice they can
only be a u32 the value should be discarded.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Code gen for stats is a bit of a challenge, but from looking
at the attrs I think that the format isn't quite right.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
UDP tunnel and cable test messages have a lot of nests,
which do not match the names of the enum entries in C uAPI.
Some of the structure / nesting also looks wrong.
Untangle this a little bit based on the names, comments and
educated guesses, I haven't actually tested the results.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
C does not allow defining structures and enums with the same name.
Since enum ethtool_stringset exists in the uAPI we need to include
at least a stub of it in the spec. This will trigger name collision
avoidance in the code gen.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ethtool has an attribute set called stringset, from which
we'll generate struct ethtool_stringset. Unfortunately,
the old ethtool header declares enum ethtool_stringset
(the same name), to which compilers object.
This seems unavoidable. Check struct names against known
constants and append an underscore if conflict is detected.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If attr set or enum has empty enum name we need to use u32 or int
as function arguments and struct members.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most of the C enum names are guessed correctly, but there
is a handful of corner cases we need to name explicitly.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ethtool's PSE PoDL has a attr nest with different prefixes:
/* Power Sourcing Equipment */
enum {
ETHTOOL_A_PSE_UNSPEC,
ETHTOOL_A_PSE_HEADER, /* nest - _A_HEADER_* */
ETHTOOL_A_PODL_PSE_ADMIN_STATE, /* u32 */
ETHTOOL_A_PODL_PSE_ADMIN_CONTROL, /* u32 */
ETHTOOL_A_PODL_PSE_PW_D_STATUS, /* u32 */
Header has a prefix of ETHTOOL_A_PSE_ and other attrs prefix of
ETHTOOL_A_PODL_PSE_ we can't cover them uniformly.
If PODL was after PSE life would be easy.
Now we either need to add prefixes to attr names which is yucky
or support setting prefix name per attr.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
ynl-regen needs to know the arguments used to generate a file.
Record excluded ops and, while at it, user headers.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ethtool family has a small handful of quite tricky ops
and a lot of simple very useful ops. Teach ynl-gen to skip
ops so that we can bypass the tricky ones.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the recently added of_property_read_reg() helper to get the
untranslated "reg" address value.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
