`wake_enabled` indicates cros_ec_resume() needs to call
disable_irq_wake() to undo enable_irq_wake() in cros_ec_suspend().
Determine `wake_enabled` in cros_ec_suspend() instead of
reset-after-used in cros_ec_resume().
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Fix cros_ec_register() to unregister platform devices if
blocking_notifier_chain_register() fails.
Also use the single exit path to handle the platform device
unregistration.
Fixes: 42cd0ab476 ("platform/chrome: cros_ec: Query EC protocol version if EC transitions between RO/RW")
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
cros_ec_typec:
* platform/chrome: cros_ec_typec: Check for EC device - Fix a crash when using
the cros_ec_typec driver on older hardware not capable of typec commands.
* Make try power role optional.
* Mux configuration reorganization series from Prashant.
cros_ec_debugfs:
* Fix use after free. Thanks Tzung-bi.
sensorhub:
* cros_ec_sensorhub fixup - Split trace include file
misc:
* Add new mailing list for chrome-platform development.
chrome-platform@lists.linux.dev. Now with patchwork!
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQCtZK6p/AktxXfkOlzbaomhzOwwgUCYkZBeAAKCRBzbaomhzOw
wuUbAP9GaC3906dMf4zucME+icojYFQSeQFMJfS0kMdKBtJROAEArsEilx5aFf7Q
PlyoaaJ7aWpLO3pnUdUNwQM0hJPLGwo=
=me9M
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"cros_ec_typec:
- Check for EC device - Fix a crash when using the cros_ec_typec
driver on older hardware not capable of typec commands
- Make try power role optional
- Mux configuration reorganization series from Prashant
cros_ec_debugfs:
- Fix use after free. Thanks Tzung-bi
sensorhub:
- cros_ec_sensorhub fixup - Split trace include file
misc:
- Add new mailing list for chrome-platform development:
chrome-platform@lists.linux.dev
Now with patchwork!"
* tag 'tag-chrome-platform-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_debugfs: detach log reader wq from devm
platform: chrome: Split trace include file
platform/chrome: cros_ec_typec: Update mux flags during partner removal
platform/chrome: cros_ec_typec: Configure muxes at start of port update
platform/chrome: cros_ec_typec: Get mux state inside configure_mux
platform/chrome: cros_ec_typec: Move mux flag checks
platform/chrome: cros_ec_typec: Check for EC device
platform/chrome: cros_ec_typec: Make try power role optional
MAINTAINERS: platform-chrome: Add new chrome-platform@lists.linux.dev list
Debugfs console_log uses devm memory (e.g. debug_info in
cros_ec_console_log_poll()). However, lifecycles of device and debugfs
are independent. An use-after-free issue is observed if userland
program operates the debugfs after the memory has been freed.
The call trace:
do_raw_spin_lock
_raw_spin_lock_irqsave
remove_wait_queue
ep_unregister_pollwait
ep_remove
do_epoll_ctl
A Python example to reproduce the issue:
... import select
... p = select.epoll()
... f = open('/sys/kernel/debug/cros_scp/console_log')
... p.register(f, select.POLLIN)
... p.poll(1)
[(4, 1)] # 4=fd, 1=select.POLLIN
[ shutdown cros_scp at the point ]
... p.poll(1)
[(4, 16)] # 4=fd, 16=select.POLLHUP
... p.unregister(f)
An use-after-free issue raises here. It called epoll_ctl with
EPOLL_CTL_DEL which in turn to use the workqueue in the devm (i.e.
log_wq).
Detaches log reader's workqueue from devm to make sure it is persistent
even if the device has been removed.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Reviewed-by: Guenter Roeck <groeck@google.com>
Link: https://lore.kernel.org/r/20220209051130.386175-1-tzungbi@google.com
Signed-off-by: Benson Leung <bleung@chromium.org>
cros_ec_trace.h defined 5 tracing events, 2 for cros_ec_proto and
3 for cros_ec_sensorhub_ring.
These 2 files are in different kernel modules, the traces are defined
twice in the kernel which leads to problem enabling only some traces.
Move sensorhub traces from cros_ec_trace.h to cros_ec_sensorhub_trace.h
and enable them only in cros_ec_sensorhub kernel module.
Check we can now enable any single traces: without this patch,
we can only enable all sensorhub traces or none.
Fixes: d453ceb654 ("platform/chrome: sensorhub: Add trace events for sample")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220122001301.640337-1-gwendal@chromium.org
Signed-off-by: Benson Leung <bleung@chromium.org>
Here is the big set of char/misc and other small driver subsystem
updates for 5.18-rc1.
Included in here are merges from driver subsystems which contain:
- iio driver updates and new drivers
- fsi driver updates
- fpga driver updates
- habanalabs driver updates and support for new hardware
- soundwire driver updates and new drivers
- phy driver updates and new drivers
- coresight driver updates
- icc driver updates
Individual changes include:
- mei driver updates
- interconnect driver updates
- new PECI driver subsystem added
- vmci driver updates
- lots of tiny misc/char driver updates
There will be two merge conflicts with your tree, one in MAINTAINERS
which is obvious to fix up, and one in drivers/phy/freescale/Kconfig
which also should be easy to resolve.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYkG3fQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykNEgCfaRG8CRxewDXOO4+GSeA3NGK+AIoAnR89donC
R4bgCjfg8BWIBcVVXg3/
=WWXC
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
updates for 5.18-rc1.
Included in here are merges from driver subsystems which contain:
- iio driver updates and new drivers
- fsi driver updates
- fpga driver updates
- habanalabs driver updates and support for new hardware
- soundwire driver updates and new drivers
- phy driver updates and new drivers
- coresight driver updates
- icc driver updates
Individual changes include:
- mei driver updates
- interconnect driver updates
- new PECI driver subsystem added
- vmci driver updates
- lots of tiny misc/char driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits)
firmware: google: Properly state IOMEM dependency
kgdbts: fix return value of __setup handler
firmware: sysfb: fix platform-device leak in error path
firmware: stratix10-svc: add missing callback parameter on RSU
arm64: dts: qcom: add non-secure domain property to fastrpc nodes
misc: fastrpc: Add dma handle implementation
misc: fastrpc: Add fdlist implementation
misc: fastrpc: Add helper function to get list and page
misc: fastrpc: Add support to secure memory map
dt-bindings: misc: add fastrpc domain vmid property
misc: fastrpc: check before loading process to the DSP
misc: fastrpc: add secure domain support
dt-bindings: misc: add property to support non-secure DSP
misc: fastrpc: Add support to get DSP capabilities
misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP
misc: fastrpc: separate fastrpc device from channel context
dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells
dt-bindings: nvmem: make "reg" property optional
nvmem: brcm_nvram: parse NVRAM content into NVMEM cells
nvmem: dt-bindings: Fix the error of dt-bindings check
...
Highlights:
- new drivers:
- AMD Host System Management Port (HSMP)
- Intel Software Defined Silicon
- removed drivers (functionality folded into other drivers):
- intel_cht_int33fe_microb
- surface3_button
- amd-pmc:
- s2idle bug-fixes
- Support for AMD Spill to DRAM STB feature
- hp-wmi:
- Fix SW_TABLET_MODE detection method (and other fixes)
- Support omen thermal profile policy v1
- serial-multi-instantiate:
- Add SPI device support
- Add support for CS35L41 amplifiers used in new laptops
- think-lmi:
- syfs-class-firmware-attributes Certificate authentication support
- thinkpad_acpi:
- Fixes + quirks
- Add platform_profile support on AMD based ThinkPads
- x86-android-tablets
- Improve Asus ME176C / TF103C support
- Support Nextbook Ares 8, Lenovo Tab 2 830 and 1050 tablets
- Lots of various other small fixes and hardware-id additions
The following is an automated git shortlog grouped by driver:
ACPI / scan:
- Create platform device for CS35L41
ACPI / x86:
- Add support for LPS0 callback handler
ALSA:
- hda/realtek: Add support for HP Laptops
Add AMD system management interface:
- Add AMD system management interface
Add Intel Software Defined Silicon driver:
- Add Intel Software Defined Silicon driver
Documentation:
- syfs-class-firmware-attributes: Lenovo Certificate support
- Add x86/amd_hsmp driver
ISST:
- Fix possible circular locking dependency detected
Input:
- soc_button_array - add support for Microsoft Surface 3 (MSHW0028) buttons
Merge remote-tracking branch 'pdx86/platform-drivers-x86-pinctrl-pmu_clk' into review-hans-gcc12:
- Merge remote-tracking branch 'pdx86/platform-drivers-x86-pinctrl-pmu_clk' into review-hans-gcc12
Merge tag 'platform-drivers-x86-serial-multi-instantiate-1' into review-hans:
- Merge tag 'platform-drivers-x86-serial-multi-instantiate-1' into review-hans
Replace acpi_bus_get_device():
- Replace acpi_bus_get_device()
amd-pmc:
- Only report STB errors when STB enabled
- Drop CPU QoS workaround
- Output error codes in messages
- Move to later in the suspend process
- Validate entry into the deepest state on resume
- uninitialized variable in amd_pmc_s2d_init()
- Set QOS during suspend on CZN w/ timer wakeup
- Add support for AMD Spill to DRAM STB feature
- Correct usage of SMU version
- Make amd_pmc_stb_debugfs_fops static
asus-tf103c-dock:
- Make 2 global structs static
asus-wmi:
- Fix regression when probing for fan curve control
hp-wmi:
- support omen thermal profile policy v1
- Changing bios_args.data to be dynamically allocated
- Fix 0x05 error code reported by several WMI calls
- Fix SW_TABLET_MODE detection method
- Fix hp_wmi_read_int() reporting error (0x05)
huawei-wmi:
- check the return value of device_create_file()
i2c-multi-instantiate:
- Rename it for a generic serial driver name
int3472:
- Add terminator to gpiod_lookup_table
intel-uncore-freq:
- fix uncore_freq_common_init() error codes
intel_cht_int33fe:
- Move to intel directory
- Drop Lenovo Yogabook YB1-X9x code
- Switch to DMI modalias based loading
intel_crystal_cove_charger:
- Fix IRQ masking / unmasking
lg-laptop:
- Move setting of battery charge limit to common location
pinctrl:
- baytrail: Add pinconf group + function for the pmu_clk
platform/dcdbas:
- move EXPORT_SYMBOL after function
platform/surface:
- Remove Surface 3 Button driver
- surface3-wmi: Simplify resource management
- Replace acpi_bus_get_device()
- Reinstate platform dependency
platform/x86/intel-uncore-freq:
- Split common and enumeration part
platform/x86/intel/uncore-freq:
- Display uncore current frequency
- Use sysfs API to create attributes
- Move to uncore-frequency folder
selftests:
- sdsi: test sysfs setup
serial-multi-instantiate:
- Add SPI support
- Reorganize I2C functions
spi:
- Add API to count spi acpi resources
- Support selection of the index of the ACPI Spi Resource before alloc
- Create helper API to lookup ACPI info for spi device
- Make spi_alloc_device and spi_add_device public again
surface:
- surface3_power: Fix battery readings on batteries without a serial number
think-lmi:
- Certificate authentication support
thinkpad_acpi:
- consistently check fan_get_status return.
- Don't use test_bit on an integer
- Fix compiler warning about uninitialized err variable
- clean up dytc profile convert
- Add PSC mode support
- Add dual fan probe
- Add dual-fan quirk for T15g (2nd gen)
- Fix incorrect use of platform profile on AMD platforms
- Add quirk for ThinkPads without a fan
tools arch x86:
- Add Intel SDSi provisiong tool
touchscreen_dmi:
- Add info for the RWC NANOTE P8 AY07J 2-in-1
x86-android-tablets:
- Depend on EFI and SPI
- Lenovo Yoga Tablet 2 830/1050 sound support
- Workaround Lenovo Yoga Tablet 2 830/1050 poweroff hang
- Add Lenovo Yoga Tablet 2 830 / 1050 data
- Fix EBUSY error when requesting IOAPIC IRQs
- Minor charger / fuel-gauge improvements
- Add Nextbook Ares 8 data
- Add IRQ to Asus ME176C accelerometer info
- Add lid-switch gpio-keys pdev to Asus ME176C + TF103C
- Add x86_android_tablet_get_gpiod() helper
- Add Asus ME176C/TF103C charger and fuelgauge props
- Add battery swnode support
- Trivial typo fix for MODULE_AUTHOR
- Fix the buttons on CZC P10T tablet
- Constify the gpiod_lookup_tables arrays
- Add an init() callback to struct x86_dev_info
- Add support for disabling ACPI _AEI handlers
- Correct crystal_cove_charger module name
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmI8SjEUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9wYUwf/cdUMPFy5cwpHq1LuqGy+PxVCRHCe
71PFd2Ycj+HGOtrt66RxSiCC1Seb4tylr7FvudToDaqWjlBf5n6LhpDudg4ds7Qw
lCuRlaXTIrF7p3nOLIsWvJPRqacMG79KkRM62MLTS2evtRYjbnKvFzNPJPzr8827
1AhCakE92S8gkR5lUZYYHtsaz9rZ4z4TrEtjO6GdlbL2bDw0l18dNNwdMomfVpNS
bBIHIDLeufDuMJ4PxIHlE5MB3AuZAuc0HTJWihozyJX/h5FMGI6qVm0/s9RAfHgX
XdMCpADtS/JjHCmkFgLZYIzvXTxwQVZRo5VO0Wrv5Mis6gSpxJXCd0aKlA==
=1x9/
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"New drivers:
- AMD Host System Management Port (HSMP)
- Intel Software Defined Silicon
Removed drivers (functionality folded into other drivers):
- intel_cht_int33fe_microb
- surface3_button
amd-pmc:
- s2idle bug-fixes
- Support for AMD Spill to DRAM STB feature
hp-wmi:
- Fix SW_TABLET_MODE detection method (and other fixes)
- Support omen thermal profile policy v1
serial-multi-instantiate:
- Add SPI device support
- Add support for CS35L41 amplifiers used in new laptops
think-lmi:
- syfs-class-firmware-attributes Certificate authentication support
thinkpad_acpi:
- Fixes + quirks
- Add platform_profile support on AMD based ThinkPads
x86-android-tablets:
- Improve Asus ME176C / TF103C support
- Support Nextbook Ares 8, Lenovo Tab 2 830 and 1050 tablets
Lots of various other small fixes and hardware-id additions"
* tag 'platform-drivers-x86-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (60 commits)
platform/x86: think-lmi: Certificate authentication support
Documentation: syfs-class-firmware-attributes: Lenovo Certificate support
platform/x86: amd-pmc: Only report STB errors when STB enabled
platform/x86: amd-pmc: Drop CPU QoS workaround
platform/x86: amd-pmc: Output error codes in messages
platform/x86: amd-pmc: Move to later in the suspend process
ACPI / x86: Add support for LPS0 callback handler
platform/x86: thinkpad_acpi: consistently check fan_get_status return.
platform/x86: hp-wmi: support omen thermal profile policy v1
platform/x86: hp-wmi: Changing bios_args.data to be dynamically allocated
platform/x86: hp-wmi: Fix 0x05 error code reported by several WMI calls
platform/x86: hp-wmi: Fix SW_TABLET_MODE detection method
platform/x86: hp-wmi: Fix hp_wmi_read_int() reporting error (0x05)
platform/x86: amd-pmc: Validate entry into the deepest state on resume
platform/x86: thinkpad_acpi: Don't use test_bit on an integer
platform/x86: thinkpad_acpi: Fix compiler warning about uninitialized err variable
platform/x86: thinkpad_acpi: clean up dytc profile convert
platform/x86: x86-android-tablets: Depend on EFI and SPI
platform/x86: amd-pmc: uninitialized variable in amd_pmc_s2d_init()
platform/x86: intel-uncore-freq: fix uncore_freq_common_init() error codes
...
dma-buf:
- rename dma-buf-map to iosys-map
core:
- move buddy allocator to core
- add pci/platform init macros
- improve EDID parser deep color handling
- EDID timing type 7 support
- add GPD Win Max quirk
- add yes/no helpers to string_helpers
- flatten syncobj chains
- add nomodeset support to lots of drivers
- improve fb-helper clipping support
- add default property value interface
fbdev:
- improve fbdev ops speed
ttm:
- add a backpointer from ttm bo->ttm resource
dp:
- move displayport headers
- add a dp helper module
bridge:
- anx7625 atomic support, HDCP support
panel:
- split out panel-lvds and lvds bindings
- find panels in OF subnodes
privacy:
- add chromeos privacy screen support
fb:
- hot unplug fw fb on forced removal
simpledrm:
- request region instead of marking ioresource busy
- add panel oreintation property
udmabuf:
- fix oops with 0 pages
amdgpu:
- power management code cleanup
- Enable freesync video mode by default
- RAS code cleanup
- Improve VRAM access for debug using SDMA
- SR-IOV rework special register access and fixes
- profiling power state request ioctl
- expose IP discovery via sysfs
- Cyan skillfish updates
- GC 10.3.7, SDMA 5.2.7, DCN 3.1.6 updates
- expose benchmark tests via debugfs
- add module param to disable XGMI for testing
- GPU reset debugfs register dumping support
amdkfd:
- CRIU support
- SDMA queue fixes
radeon:
- UVD suspend fix
- iMac backlight fix
i915:
- minimal parallel submission for execlists
- DG2-G12 subplatform added
- DG2 programming workarounds
- DG2 accelerated migration support
- flat CCS and CCS engine support for XeHP
- initial small BAR support
- drop fake LMEM support
- ADL-N PCH support
- bigjoiner updates
- introduce VMA resources and async unbinding
- register definitions cleanups
- multi-FBC refactoring
- DG1 OPROM over SPI support
- ADL-N platform enabling
- opregion mailbox #5 support
- DP MST ESI improvements
- drm device based logging
- async flip optimisation for DG2
- CPU arch abstraction fixes
- improve GuC ADS init to work on aarch64
- tweak TTM LRU priority hint
- GuC 69.0.3 support
- remove short term execbuf pins
nouveau:
- higher DP/eDP bitrates
- backlight fixes
msm:
- dpu + dp support for sc8180x
- dp support for sm8350
- dpu + dsi support for qcm2290
- 10nm dsi phy tuning support
- bridge support for dp encoder
- gpu support for additional 7c3 SKUs
ingenic:
- HDMI support for JZ4780
- aux channel EDID support
ast:
- AST2600 support
- add wide screen support
- create DP/DVI connectors
omapdrm:
- fix implicit dma_buf fencing
vc4:
- add CSC + full range support
- better display firmware handoff
panfrost:
- add initial dual-core GPU support
stm:
- new revision support
- fb handover support
mediatek:
- transfer display binding document to yaml format.
- add mt8195 display device binding.
- allow commands to be sent during video mode.
- add wait_for_event for crtc disable by cmdq.
tegra:
- YUV format support
rcar-du:
- LVDS support for M3-W+ (R8A77961)
exynos:
- BGR pixel format for FIMD device
-----BEGIN PGP SIGNATURE-----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=uRsT
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Lots of work all over, Intel improving DG2 support, amdkfd CRIU
support, msm new hw support, and faster fbdev support.
dma-buf:
- rename dma-buf-map to iosys-map
core:
- move buddy allocator to core
- add pci/platform init macros
- improve EDID parser deep color handling
- EDID timing type 7 support
- add GPD Win Max quirk
- add yes/no helpers to string_helpers
- flatten syncobj chains
- add nomodeset support to lots of drivers
- improve fb-helper clipping support
- add default property value interface
fbdev:
- improve fbdev ops speed
ttm:
- add a backpointer from ttm bo->ttm resource
dp:
- move displayport headers
- add a dp helper module
bridge:
- anx7625 atomic support, HDCP support
panel:
- split out panel-lvds and lvds bindings
- find panels in OF subnodes
privacy:
- add chromeos privacy screen support
fb:
- hot unplug fw fb on forced removal
simpledrm:
- request region instead of marking ioresource busy
- add panel oreintation property
udmabuf:
- fix oops with 0 pages
amdgpu:
- power management code cleanup
- Enable freesync video mode by default
- RAS code cleanup
- Improve VRAM access for debug using SDMA
- SR-IOV rework special register access and fixes
- profiling power state request ioctl
- expose IP discovery via sysfs
- Cyan skillfish updates
- GC 10.3.7, SDMA 5.2.7, DCN 3.1.6 updates
- expose benchmark tests via debugfs
- add module param to disable XGMI for testing
- GPU reset debugfs register dumping support
amdkfd:
- CRIU support
- SDMA queue fixes
radeon:
- UVD suspend fix
- iMac backlight fix
i915:
- minimal parallel submission for execlists
- DG2-G12 subplatform added
- DG2 programming workarounds
- DG2 accelerated migration support
- flat CCS and CCS engine support for XeHP
- initial small BAR support
- drop fake LMEM support
- ADL-N PCH support
- bigjoiner updates
- introduce VMA resources and async unbinding
- register definitions cleanups
- multi-FBC refactoring
- DG1 OPROM over SPI support
- ADL-N platform enabling
- opregion mailbox #5 support
- DP MST ESI improvements
- drm device based logging
- async flip optimisation for DG2
- CPU arch abstraction fixes
- improve GuC ADS init to work on aarch64
- tweak TTM LRU priority hint
- GuC 69.0.3 support
- remove short term execbuf pins
nouveau:
- higher DP/eDP bitrates
- backlight fixes
msm:
- dpu + dp support for sc8180x
- dp support for sm8350
- dpu + dsi support for qcm2290
- 10nm dsi phy tuning support
- bridge support for dp encoder
- gpu support for additional 7c3 SKUs
ingenic:
- HDMI support for JZ4780
- aux channel EDID support
ast:
- AST2600 support
- add wide screen support
- create DP/DVI connectors
omapdrm:
- fix implicit dma_buf fencing
vc4:
- add CSC + full range support
- better display firmware handoff
panfrost:
- add initial dual-core GPU support
stm:
- new revision support
- fb handover support
mediatek:
- transfer display binding document to yaml format.
- add mt8195 display device binding.
- allow commands to be sent during video mode.
- add wait_for_event for crtc disable by cmdq.
tegra:
- YUV format support
rcar-du:
- LVDS support for M3-W+ (R8A77961)
exynos:
- BGR pixel format for FIMD device"
* tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drm: (1529 commits)
drm/i915/display: Do not re-enable PSR after it was marked as not reliable
drm/i915/display: Fix HPD short pulse handling for eDP
drm/amdgpu: Use drm_mode_copy()
drm/radeon: Use drm_mode_copy()
drm/amdgpu: Use ternary operator in `vcn_v1_0_start()`
drm/amdgpu: Remove pointless on stack mode copies
drm/amd/pm: fix indenting in __smu_cmn_reg_print_error()
drm/amdgpu/dc: fix typos in comments
drm/amdgpu: fix typos in comments
drm/amd/pm: fix typos in comments
drm/amdgpu: Add stolen reserved memory for MI25 SRIOV.
drm/amdgpu: Merge get_reserved_allocation to get_vbios_allocations.
drm/amdkfd: evict svm bo worker handle error
drm/amdgpu/vcn: fix vcn ring test failure in igt reload test
drm/amdgpu: only allow secure submission on rings which support that
drm/amdgpu: fixed the warnings reported by kernel test robot
drm/amd/display: 3.2.177
drm/amd/display: [FW Promotion] Release 0.0.108.0
drm/amd/display: Add save/restore PANEL_PWRSEQ_REF_DIV2
drm/amd/display: Wait for hubp read line for Pollock
...
It's been a fairly calm development cycle. There are a few
last-minute ALSA core fixes, most notably for covering PCM ioctl
races, but the most of rest are device-specific changes.
Below are some highlights:
* ALSA core:
- Fixes for PCM ioctl races that may lead to UAF
- Fix for oversized allocations in PCM OSS layer
* ASoC:
- Start of moving SoF to support multiple IPC mechanisms
- Use of NHLT ACPI table to reduce the amount of quirking required for
Intel systems
- Preliminary works forthcoming Intel AVS driver for legacy Intel DSP
firmwares
- Support for AMD PDM, Atmel PDMC, Awinic AW8738, i.MX cards with
TLV320AIC31xx, Intel machines with CS35L41 and ESSX8336, Mediatek
MT8181 wideband bluetooth, nVidia Tegra234, Qualcomm SC7280, Renesas
RZ/V2L, Texas Instruments TAS585M
* HD-audio:
- Driver re-binding fix for HD-audio
- Updates for Intel ADL and Tegra234, various platform quirks for
Dell, HP, Lenovo, ASUS, Samsung and Clevo machines
* USB-audio:
- Quirk updates for Scarlett2, RODE, Corsair devices
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmI7AkUOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE/faBAAvPFODmyJlt16UG7bSlqwoSafWho+Bp4GSH4O
+pEm47+kULgkKOm9k2NK7sci6nOsNIabQsVhMeryCLgDlNlFqR4FQjIswbgtRWsO
lmu3TMw26I0vS2joNE+tpqCOyJuEGI/ekQru3aKAZx6JyBlXmrzuf7L4BNomVORr
fgBgpMg/tRcE9ceWjc1qHMggueAfkcjnI4ioFYxaWYXp4wyVX1mx3mVHEf6WQnff
ZXsgQLhupUKLvyBr2D1vkN6JcRyTahkBprbLEtZhKszR8hl6tFlnyILkzsiZ/B+K
oJAvtEoC6z2PW+suPSPPl2qnbyOJyX32m43iCXW8uSG1KG/K2JshZIJshMbVw3pV
rLK3XYr2zoE3VzzNUL+QyGYhLpdDPSNF+E19z7jfWU/wKwCUu8qWuejhf9uAlQgx
XtlrZuyCpnsNVyILqLM2Sgzvc1U8vJd68uYwhecchTmP0Aurld5NM2PiAagcvVpW
RtEMbTJbIBYbou3UPhxDjEdQOeT+KZUYrClEjb61pJQ9sHAbC4l0LoRyS4NEWCZH
J7Z5DNPqPf6CFU1AVpfktL4Dh+VtM7nb4DVyyyLWWZgG3NcXSVLLbUA8Uo9qoDV5
7tHnV+1MURBwEq1CUvZtb3sRC5tyNVkzXMMAJfcVWlv7JkoXs8pzwK9w685aP2zl
YDOfau8=
=5cCU
-----END PGP SIGNATURE-----
Merge tag 'sound-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It's been a fairly calm development cycle. There are a few last-minute
ALSA core fixes, most notably for covering PCM ioctl races, but the
most of rest are device-specific changes.
Below are some highlights:
ALSA core:
- Fixes for PCM ioctl races that may lead to UAF
- Fix for oversized allocations in PCM OSS layer
ASoC:
- Start of moving SoF to support multiple IPC mechanisms
- Use of NHLT ACPI table to reduce the amount of quirking required
for Intel systems
- Preliminary works forthcoming Intel AVS driver for legacy Intel DSP
firmwares
- Support for AMD PDM, Atmel PDMC, Awinic AW8738, i.MX cards with
TLV320AIC31xx, Intel machines with CS35L41 and ESSX8336, Mediatek
MT8181 wideband bluetooth, nVidia Tegra234, Qualcomm SC7280,
Renesas RZ/V2L, Texas Instruments TAS585M
HD-audio:
- Driver re-binding fix for HD-audio
- Updates for Intel ADL and Tegra234, various platform quirks for
Dell, HP, Lenovo, ASUS, Samsung and Clevo machines
USB-audio:
- Quirk updates for Scarlett2, RODE, Corsair devices"
* tag 'sound-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (486 commits)
ALSA: hda/realtek: Add alc256-samsung-headphone fixup
ALSA: pci: fix reading of swapped values from pcmreg in AC97 codec
ALSA: pcm: Add stream lock during PCM reset ioctl operations
ALSA: pcm: Fix races among concurrent prealloc proc writes
ALSA: pcm: Fix races among concurrent prepare and hw_params/hw_free calls
ALSA: pcm: Fix races among concurrent read/write and buffer changes
ALSA: pcm: Fix races among concurrent hw_params and hw_free calls
ASoC: atmel: mchp-pdmc: print the correct property name
MAINTAINERS: Add Shengjiu to maintainer list of sound/soc/fsl
ASoC: SOF: Add a new dai_get_clk topology IPC op
ASoC: SOF: topology: Add ops for setting up and tearing down pipelines
ASoC: SOF: expose sof_route_setup()
ASoC: SOF: Add dai_link_fixup PCM op for IPC3
ASoC: SOF: Add trigger PCM op for IPC3
ASoC: SOF: Define hw_params PCM op for IPC3
ASoC: SOF: Introduce IPC3 PCM hw_free op
ASoC: SOF: pcm: expose the sof_pcm_setup_connected_widgets() function
ASoC: SOF: Introduce IPC-specific PCM ops
ASoC: SOF: Add bytes_ext control IPC ops for IPC3
ASoC: SOF: Add bytes_get/put control IPC ops for IPC3
...
The overwhelming bulk of this pull request is a change from Uwe
Kleine-König which changes the return type of the remove() function to
void as part of some wider work he's doing to do this for all bus types,
causing updates to most SPI device drivers. The branch with that on has
been cross merged with a couple of other trees which added new SPI
drivers this cycle, I'm not expecting any build issues resulting from
the change.
Otherwise it's been a relatively quiet release with some new device
support, a few minor features and the welcome completion of the
conversion of the subsystem to use GPIO descriptors rather than numbers:
- Change return type of remove() to void.
- Completion of the conversion of SPI controller drivers to use GPIO
descriptors rather than numbers.
- Quite a few DT schema conversions.
- Support for multiple SPI devices on a bus in ACPI systems.
- Big overhaul of the PXA2xx SPI driver.
- Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and
MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and
Sunplus SP7021.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmI4b+8ACgkQJNaLcl1U
h9AB+Qf/WhPzDSCdhK1repnSmEpRNs/J6hItmY2H6pTQaWALpfTB0+p1Nb5tAotg
fHbu6a2AsiiwWt+tDal44GFYhS0CDSOT4hqgLV8msyDDPPJqqr7A2dbu7YrCjTVI
TgNZNwxW7c2LgqBXR9GV7NPWYoxYxveoYh+L+05MSuSQxSOvPl6LUZiZPnPufQM6
dCpEh19atrtasFg3rFnslWBd2C3h8hb6YT7vUZs9gxhg3FvSgpYQwzz5SfFgHXK6
Rg07m8fDTSjf2qo1C4pc/d1Ni1xBe7aHKMtjtR3jJ4q8QqiawfCcvvOep/Iaec1+
s3qnDthohWMJoF1W6ERf3HiAgNIfhg==
=4tlR
-----END PGP SIGNATURE-----
Merge tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The overwhelming bulk of this pull request is a change from Uwe
Kleine-König which changes the return type of the remove() function to
void as part of some wider work he's doing to do this for all bus
types, causing updates to most SPI device drivers. The branch with
that on has been cross merged with a couple of other trees which added
new SPI drivers this cycle, I'm not expecting any build issues
resulting from the change.
Otherwise it's been a relatively quiet release with some new device
support, a few minor features and the welcome completion of the
conversion of the subsystem to use GPIO descriptors rather than
numbers:
- Change return type of remove() to void.
- Completion of the conversion of SPI controller drivers to use GPIO
descriptors rather than numbers.
- Quite a few DT schema conversions.
- Support for multiple SPI devices on a bus in ACPI systems.
- Big overhaul of the PXA2xx SPI driver.
- Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and
MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and
Sunplus SP7021"
[ And this is obviously where that spi change that snuck into the
regulator tree _should_ have been :^]
* tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (124 commits)
spi: fsi: Implement a timeout for polling status
spi: Fix erroneous sgs value with min_t()
spi: tegra20: Use of_device_get_match_data()
spi: mediatek: add ipm design support for MT7986
spi: Add compatible for MT7986
spi: sun4i: fix typos in comments
spi: mediatek: support tick_delay without enhance_timing
spi: Update clock-names property for arm pl022
spi: rockchip-sfc: fix platform_get_irq.cocci warning
spi: s3c64xx: Add spi port configuration for Tesla FSD SoC
spi: dt-bindings: samsung: Add fsd spi compatible
spi: topcliff-pch: Prevent usage of potentially stale DMA device
spi: tegra210-quad: combined sequence mode
spi: tegra210-quad: add acpi support
spi: npcm-fiu: Fix typo ("npxm")
spi: Fix Tegra QSPI example
spi: qup: replace spin_lock_irqsave by spin_lock in hard IRQ
spi: cadence: fix platform_get_irq.cocci warning
spi: Update NXP Flexspi maintainer details
dt-bindings: mfd: maxim,max77802: Convert to dtschema
...
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220309202327.16627-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implementation of certificate authentication feature for Lenovo
platforms. This allows for signed updates of BIOS settings.
Functionality supported:
- Cert support available check. At initialisation check if BIOS
supports certification authentication and if a certificate is
installed. Enable the sysfs nodes appropriately
- certificate and signature authentication attributes to enable
a user to install, update and delete a certificate using signed
signatures
- certificate_thumbprint to confirm installed certificate details
- support to go from certificate to password based authentication
- signature and save_signature attributes needed for setting BIOS
attributes using certificate authentication.
Tested on X1 Carbon G10 and X1 Yoga G7. This feature is not
generally available yet but will be released later this year.
Note, I also cleaned up the formating of the GUIDs when I was adding
the new defines. Hope that's OK to combine in this commit.
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20220317214008.3459-2-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently if STB is disabled but an earlier function reported an
error an incorrect error will be emitted about failing to write to
STB.
Correct this logic error by only showing errors when STB is enabled.
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220317190301.6818-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
A workaround was previously introduced as part of commit 646f429ec2de
("platform/x86: amd-pmc: Set QOS during suspend on CZN w/ timer wakeup")
to prevent CPUs from going into the deepest state during the execution
of the `noirq` stage of `amd_pmc`. As `amd_pmc` has been pushed to the
last step for suspend on AMD platforms, this workaround is no longer
necessary.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220317141445.6498-4-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The return type for the s2idle callbacks is 'void', so any errors that
occur will no longer be displayed.
Output these error codes in the messages in case of any failures.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220317141445.6498-3-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The `OS_HINT` message is supposed to indicate that everything else
that is supposed to go into the deepest state has done so.
This assumption is invalid as:
1) The CPUs will still go in and out of the deepest state
2) Other devices may still run their `noirq` suspend routines
3) The LPS0 ACPI device will still run
To more closely mirror how this works on other operating systems,
move the `amd-pmc` suspend to the very last thing before the s2idle
loop via an lps0 callback.
Fixes: 8d89835b04 ("PM: suspend: Do not pause cpuidle in the suspend-to-idle path")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220317141445.6498-2-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Clang static analysis returns this false positive
thinkpad_acpi.c:8926:19: warning: The left operand
of '!=' is a garbage value
(status != 0) ? "enabled" : "disabled", status);
~~~~~~ ^
The return of fan_get_status* is checked inconsistenly.
Sometime ret < 0 is an error, sometimes !ret.
Both fan_get_status() and fan_get_status_safe() return
0 on success and return negative otherwise. Change
the checks for error, ret < 0, into checks for
not success, !ret.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20220312145327.1398510-1-trix@redhat.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
As it turns out, these laptops have 2 thermal profile versions.
A previous patch added support for v0, this patch adds support
for v1 thermal policies that are in use on some devices.
We obtain the thermal policy version by querying the get system
design data WMI call and looking at the fourth byte it returns,
except if the system board DMI Board ID is in a specific array
that the windows command center app overrides to thermal policy
v0 for some reason.
Signed-off-by: Enver Balalic <balalic.enver@gmail.com>
Link: https://lore.kernel.org/r/20220314121453.kjszdciymtg6ctbq@omen
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The purpose of this patch is to remove 128 bytes buffer limitation
imposed in bios_args structure.
A limiting factor discovered during this investigation was the struct
bios_args.data size restriction. The data member size limits all
possible WMI commands to those requiring buffer size of 128 bytes or
less. Several WMI commands and queries require a buffer size larger
than 128 bytes hence limiting current and feature supported by the
driver. It is for this reason, struct bios_args.data changed and is
dynamically allocated. hp_wmi_perform_query function changed to
handle the memory allocation and release of any required buffer size.
All changes were validated on a HP ZBook Workstation notebook,
HP EliteBook x360, and HP EliteBook 850 G8. Additional
validation was included in the test process to ensure no other
commands were incorrectly handled.
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://lore.kernel.org/r/20220310210853.28367-5-jorge.lopez2@hp.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Several WMI queries leverage hp_wmi_read_int function to read their
data. hp_wmi_read_int function was corrected in a previous patch.
Now, this function invokes hp_wmi_perform_query with input parameter
of size zero and the output buffer of size 4.
WMI commands calling hp_wmi_perform_query with input buffer size value
of zero are listed below.
HPWMI_DISPLAY_QUERY
HPWMI_HDDTEMP_QUERY
HPWMI_ALS_QUERY
HPWMI_HARDWARE_QUERY
HPWMI_WIRELESS_QUERY
HPWMI_BIOS_QUERY
HPWMI_FEATURE_QUERY
HPWMI_HOTKEY_QUERY
HPWMI_FEATURE2_QUERY
HPWMI_WIRELESS2_QUERY
HPWMI_POSTCODEERROR_QUERY
HPWMI_THERMAL_PROFILE_QUERY
HPWMI_FAN_SPEED_MAX_GET_QUERY
Invoking those WMI commands with an input buffer size greater
than zero will cause error 0x05 to be returned.
All WMI commands executed by the driver were reviewed and changes
were made to ensure the expected input and output buffer size match
the WMI specification.
Changes were validated on a HP ZBook Workstation notebook,
HP EliteBook x360, and HP EliteBook 850 G8. Additional
validation was included in the test process to ensure no other
commands were incorrectly handled.
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://lore.kernel.org/r/20220310210853.28367-4-jorge.lopez2@hp.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The purpose of this patch is to introduce a fix and removal of the
current hack when determining tablet mode status.
Determining the tablet mode status requires reading Byte 0 bit 2 as
reported by HPWMI_HARDWARE_QUERY. The investigation identified the
failure was rooted in two areas: HPWMI_HARDWARE_QUERY failure (0x05)
and reading Byte 0, bit 2 only to determine the table mode status.
HPWMI_HARDWARE_QUERY WMI failure also rendered the dock state value
invalid.
The latest changes use SMBIOS Type 3 (chassis type) and WMI Command
0x40 (device_mode_status) information to determine if the device is
in tablet mode or not.
hp_wmi_hw_state function was split into two functions;
hp_wmi_get_dock_state and hp_wmi_get_tablet_mode. The new functions
separate how dock_state and tablet_mode is handled in a cleaner
manner.
All changes were validated on a HP ZBook Workstation notebook,
HP EliteBook x360, and HP EliteBook 850 G8.
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://lore.kernel.org/r/20220310210853.28367-3-jorge.lopez2@hp.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The purpose of this patch is to introduce a fix to hp_wmi_read_int()
and eliminate failure error (0x05). Several WMI queries leverage
hp_wmi_read_int() to read their data and were failing with error 0x05.
HPWMI_DISPLAY_QUERY
HPWMI_HDDTEMP_QUERY
HPWMI_ALS_QUERY
HPWMI_HARDWARE_QUERY
HPWMI_WIRELESS_QUERY
HPWMI_POSTCODEERROR_QUERY
The failure occurs because hp_wmi_read_int() calls
hp_wmi_perform_query() with input parameter of size greater than zero.
Invoking those WMI commands with an input buffer size greater than
zero causes the command to be rejected and error 0x05 be returned.
All changes were validated on a HP ZBook Workstation notebook,
HP EliteBook x360, and HP EliteBook 850 G8.
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://lore.kernel.org/r/20220310210853.28367-2-jorge.lopez2@hp.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently the only way to discover if a system went into the deepest sleep
state is to read from sysfs after you finished suspend.
To better illustrate to users that problems have occurred, check as part
of resume and display a warning.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220310150920.560583-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
err is always set because if we get here then dytc_profile_available
is always one of DYTC_FUNCMODE_MMC or DYTC_FUNCMODE_PSC, but the
compiler cannot now that, so initialize err to 0 to avoid a
compiler warning about err being uninitialized.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220309170532.343384-1-hdegoede@redhat.com
Minor update cleaning up the code around convert_profile_to_dytc as
identified in the previous commit.
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20220307183041.4467-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The recently added support for Lenovo Yoga Tablet 2 tablets uses
symbols from EFI and SPI add "depends on EFI && SPI" to the
X86_ANDROID_TABLETS Kconfig entry.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220308152942.262130-1-hdegoede@redhat.com
The "size" variable can be uninitialized if amd_pmc_send_cmd() fails.
Fixes: 3d7d407dfb ("platform/x86: amd-pmc: Add support for AMD Spill to DRAM STB feature")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220307141832.GA19660@kili
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently the uncore_freq_common_init() return one on success and
zero on failure. There is only one caller and it has a "forgot to set
the error code" bug. Change uncore_freq_common_init() to return
negative error codes which makes the code simpler and avoids this kind
of bug in the future.
Fixes: dbce412a77 ("platform/x86/intel-uncore-freq: Split common and enumeration part")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20220304131925.GG28739@kili
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The function device_create_file() in huawei_wmi_battery_add() can fail,
so its return value should be checked.
Fixes: 355a070b09 ("platform/x86: huawei-wmi: Add battery charging thresholds")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Link: https://lore.kernel.org/r/20220303022421.313-1-baijiaju1990@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The Lenovo AMD platforms use PSC mode for providing platform
profile support.
Detect if PSC mode is available and add support for setting the
different profile modes appropriately.
Note - if both MMC mode and PSC mode are available then MMC mode
will be used in preference.
Tested on T14 G1 AMD and T14s G2 AMD.
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20220225182505.7234-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The Surface 3 buttons are now handled by the generic soc_button_array
driver. As part of adding support to soc_button_array the ACPI code
now instantiates a platform_device rather then an i2c_client so there
no longer is an i2c_client for this driver to bind to.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220224110241.9613-3-hdegoede@redhat.com
The ACPI tables for the codec setup on the Lenovo Yoga Tablet 2 830/1050
miss 2 things compared to their Windows (Lenovo Yoga Tablet 2 1051)
counterparts:
1. There is no CLKE ACPI method to enable output of the 32KHz PMU clock on
pin 6 of the SUS GPIO controller
2. The GPIOs used by the codec are not listed in the fwnode for the codec
Add pinctrl code to set the SUS6 pin mux manually and a gpio-lookup table
for the GPIOs to work around both issues.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220223133153.730337-6-hdegoede@redhat.com
These tablets' DSDT does not set acpi_gbl_reduced_hardware, so
acpi_power_off gets used as pm_power_off handler. Not setting
acpi_gbl_reduced_hardware may very well be correct for these tablets,
but acpi_power_off is broken on them.
Using acpi_power_off causes "poweroff" to hang hard. Requiring pressing
the powerbutton for 30 seconds *twice* followed by a normal 3 second
press to recover.
Avoid this by overriding the global pm_power_off handler to do
an EFI poweroff, which does work, instead.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220223133153.730337-5-hdegoede@redhat.com
The Lenovo Yoga Tablet 2 series comes in 4 versions: 830F, 830L, 1050F and
1050L. The F postfix indicates a wifi only version and the L postfix
indicates a LTE version. The 830 models are 8" and the 1050 models are 10".
Despite there being 8" and 10" versions all models use the same mainboard,
with an identical BIOS and thus identical DMI strings, so support for all
4 models is added through a single DMI table entry.
As all devices dealt with in the x86-android-tablets modules, these are
x86 ACPI tablets which ships with Android x86 as factory OS.
The mainboard's DSDT contain a bunch of I2C devices which are not actually
there, causing various resource conflicts. Enumeration of these is skipped
through the acpi_quirk_skip_i2c_client_enumeration().
Add support for manually instantiating the I2C devices which are
actually present on this tablet by adding the necessary device info to
the x86-android-tablets module.
This has been tested on a 830F and a 1050L tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220223133153.730337-4-hdegoede@redhat.com
Sometimes IRQs used by GPIOs in direct-IRQ mode are already registered
because they are used as ACPI "Interrupt () {}" resource for one of the
many bogus I2C devices present in the broken DSDTs of Android x86 tablets.
This is an issue if the existing (bogus) ACPI resource uses different
trigger settings then what is being requested, leading to an -EBUSY
error return of acpi_register_gsi().
Fix this by calling acpi_unregister_gsi() first, so that
the acpi_register_gsi() is allowed to change the trigger settings.
In cases where the GSI has not been registered yet
the acpi_unregister_gsi() is a no-op.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220223133153.730337-3-hdegoede@redhat.com
Instead of having quirks for systems that have a second fan it would
be nice to detect this setup.
Unfortunately, confirmed by the Lenovo FW team, there is no way to
retrieve this information from the EC or BIOS. Recommendation was to
attempt to read the fan and if successful then assume a 2nd fan is
present.
The fans are also supposed to spin up on boot for some time, so in
theory we could check for a speed > 0. In testing this seems to hold
true but as I couldn't test on all platforms I've avoided implementing
this. It also breaks for the corner case where you load the module
once the fans are idle.
Tested on P1G4, P1G3, X1C9 and T14 (no fans) and it works correctly.
For the platforms with dual fans where it was confirmed to work I have
removed the quirks. Potentially this could be done for all platforms
but I've left untested platforms in for now. On these platforms the
fans will be enabled and then detected - so no impact.
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20220222185137.4325-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Recent Fam19h EPYC server line of processors from AMD support system
management functionality via HSMP (Host System Management Port) interface.
The Host System Management Port (HSMP) is an interface to provide
OS-level software with access to system management functions via a
set of mailbox registers.
More details on the interface can be found in chapter
"7 Host System Management Port (HSMP)" of the following PPR
https://www.amd.com/system/files/TechDocs/55898_B1_pub_0.50.zip
This patch adds new amd_hsmp module under the drivers/platforms/x86/
which creates miscdevice with an IOCTL interface to the user space.
/dev/hsmp is for running the hsmp mailbox commands.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Reviewed-by: Carlos Bilbao <carlos.bilbao@amd.com>
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Nathan Fontenot <nathan.fontenot@amd.com>
Link: https://lore.kernel.org/r/20220222050501.18789-1-nchatrad@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The battery on the 2nd hand Surface 3 which I recently bought appears to
not have a serial number programmed in. This results in any I2C reads from
the registers containing the serial number failing with an I2C NACK.
This was causing mshw0011_bix() to fail causing the battery readings to
not work at all.
Ignore EREMOTEIO (I2C NACK) errors when retrieving the serial number and
continue with an empty serial number to fix this.
Fixes: b1f81b496b ("platform/x86: surface3_power: MSHW0011 rev-eng implementation")
BugLink: https://github.com/linux-surface/linux-surface/issues/608
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220224101848.7219-1-hdegoede@redhat.com
commit 59348401eb ("platform/x86: amd-pmc: Add special handling for
timer based S0i3 wakeup") adds support for using another platform timer
in lieu of the RTC which doesn't work properly on some systems. This path
was validated and worked well before submission. During the 5.16-rc1 merge
window other patches were merged that caused this to stop working properly.
When this feature was used with 5.16-rc1 or later some OEM laptops with the
matching firmware requirements from that commit would shutdown instead of
program a timer based wakeup.
This was bisected to commit 8d89835b04 ("PM: suspend: Do not pause
cpuidle in the suspend-to-idle path"). This wasn't supposed to cause any
negative impacts and also tested well on both Intel and ARM platforms.
However this changed the semantics of when CPUs are allowed to be in the
deepest state. For the AMD systems in question it appears this causes a
firmware crash for timer based wakeup.
It's hypothesized to be caused by the `amd-pmc` driver sending `OS_HINT`
and all the CPUs going into a deep state while the timer is still being
programmed. It's likely a firmware bug, but to avoid it don't allow setting
CPUs into the deepest state while using CZN timer wakeup path.
If later it's discovered that this also occurs from "regular" suspends
without a timer as well or on other silicon, this may be later expanded to
run in the suspend path for more scenarios.
Cc: stable@vger.kernel.org # 5.16+
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/linux-acpi/BL1PR12MB51570F5BD05980A0DCA1F3F4E23A9@BL1PR12MB5157.namprd12.prod.outlook.com/T/#mee35f39c41a04b624700ab2621c795367f19c90e
Fixes: 8d89835b04 ("PM: suspend: Do not pause cpuidle in the suspend-to-idle path")
Fixes: 23f62d7ab2 ("PM: sleep: Pause cpuidle later and resume it earlier during system transitions")
Fixes: 59348401eb ("platform/x86: amd-pmc: Add special handling for timer based S0i3 wakeup")
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220223175237.6209-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmIb/PEeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGugMH/R8icwG5gOjAuxBr
fuz9032ECVFS36Cy3ps9Eqgf5EdS4G6yz3joM4aNtp4B7e5FzI9lzBaHS8OAguNL
y7puFtBr9CywsnniJumZzciB9pEHmF/yyEKfMlRZA3JsRfLDacFstETp+duJnXoA
+s49IWsy1ot5zoherhDXcFLqDoFhLVU4hYwE1xpLpW/cllqmSnW8SDZMtWW1Ui/B
Of7zqINR4zBMmRjP4ymGq/ZrPWlFyWLdtOo0xxVoAQkeMgm33kfaaeGzfyK25FqR
JDGUZ7lkKvwz3PYh2hqJ7dc5K+vhJ18I+F1UmOiL6QAAUF/k8jq7i3Qaf6MKqh2Z
2v+A5k0=
=Hiar
-----END PGP SIGNATURE-----
Backmerge tag 'v5.17-rc6' into drm-next
This backmerges v5.17-rc6 so I can merge some amdgpu and some tegra changes on top.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The battery on the 2nd hand Surface 3 which I recently bought appears to
not have a serial number programmed in. This results in any I2C reads from
the registers containing the serial number failing with an I2C NACK.
This was causing mshw0011_bix() to fail causing the battery readings to
not work at all.
Ignore EREMOTEIO (I2C NACK) errors when retrieving the serial number and
continue with an empty serial number to fix this.
Fixes: b1f81b496b ("platform/x86: surface3_power: MSHW0011 rev-eng implementation")
BugLink: https://github.com/linux-surface/linux-surface/issues/608
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220224101848.7219-1-hdegoede@redhat.com
commit 59348401eb ("platform/x86: amd-pmc: Add special handling for
timer based S0i3 wakeup") adds support for using another platform timer
in lieu of the RTC which doesn't work properly on some systems. This path
was validated and worked well before submission. During the 5.16-rc1 merge
window other patches were merged that caused this to stop working properly.
When this feature was used with 5.16-rc1 or later some OEM laptops with the
matching firmware requirements from that commit would shutdown instead of
program a timer based wakeup.
This was bisected to commit 8d89835b04 ("PM: suspend: Do not pause
cpuidle in the suspend-to-idle path"). This wasn't supposed to cause any
negative impacts and also tested well on both Intel and ARM platforms.
However this changed the semantics of when CPUs are allowed to be in the
deepest state. For the AMD systems in question it appears this causes a
firmware crash for timer based wakeup.
It's hypothesized to be caused by the `amd-pmc` driver sending `OS_HINT`
and all the CPUs going into a deep state while the timer is still being
programmed. It's likely a firmware bug, but to avoid it don't allow setting
CPUs into the deepest state while using CZN timer wakeup path.
If later it's discovered that this also occurs from "regular" suspends
without a timer as well or on other silicon, this may be later expanded to
run in the suspend path for more scenarios.
Cc: stable@vger.kernel.org # 5.16+
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/linux-acpi/BL1PR12MB51570F5BD05980A0DCA1F3F4E23A9@BL1PR12MB5157.namprd12.prod.outlook.com/T/#mee35f39c41a04b624700ab2621c795367f19c90e
Fixes: 8d89835b04 ("PM: suspend: Do not pause cpuidle in the suspend-to-idle path")
Fixes: 23f62d7ab2 ("PM: sleep: Pause cpuidle later and resume it earlier during system transitions")
Fixes: 59348401eb ("platform/x86: amd-pmc: Add special handling for timer based S0i3 wakeup"
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220223175237.6209-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Without the terminator, if a con_id is passed to gpio_find() that
does not exist in the lookup table the function will not stop looping
correctly, and eventually cause an oops.
Fixes: 19d8d6e36b ("platform/x86: int3472: Pass tps68470_regulator_platform_data to the tps68470-regulator MFD-cell")
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20220216225304.53911-5-djrscally@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Without the terminator, if a con_id is passed to gpio_find() that
does not exist in the lookup table the function will not stop looping
correctly, and eventually cause an oops.
Fixes: 19d8d6e36b ("platform/x86: int3472: Pass tps68470_regulator_platform_data to the tps68470-regulator MFD-cell")
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20220216225304.53911-5-djrscally@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The declaration
EXPORT_SYMBOL(dcdbas_smi_request);
was placed after smi_request_store(), which made a false impression that
dcdbas_smi_request() was not exported.
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Cc: Stuart Hayes <stuart.w.hayes@gmail.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Link: https://lore.kernel.org/r/20220212125908.357588-1-mat.jonczyk@o2.pl
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Spill to DRAM functionality is a feature that allows STB (Smart Trace
Buffer) to spill data from SRAM into DRAM on some future AMD ASICs. The
size allocated for STB is more than the earlier SoC's which helps to
collect more tracing and telemetry data.
Co-developed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220204122527.3873552-1-Sanket.Goswami@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Split the current driver in two parts:
- Common part: All the commom function other than enumeration function.
- Enumeration/HW specific part: The current enumeration using CPU model
is left in the old module. This uses service of common driver to register
sysfs objects. Also provide callbacks for MSR access related to uncore.
- Add MODULE_DEVICE_TABLE to uncore-frequency.c
No functional changes are expected.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220204000306.2517447-5-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
