mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-25 05:04:09 +08:00
9f7b640f00
1024002 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Linus Torvalds
|
9f7b640f00 |
New code for 5.14:
- Refactor the buffer cache to use bulk page allocation - Convert agnumber-based AG iteration to walk per-AG structures - Clean up some unit conversions and other code warts - Reduce spinlock contention in the directio fastpath - Collapse all the inode cache walks into a single function - Remove indirect function calls from the inode cache walk code - Dramatically reduce the number of cache flushes sent when writing log buffers - Preserve inode sickness reports for longer - Rename xfs_eofblocks since it controls inode cache walks - Refactor the extended attribute code to prepare it for the addition of log intent items to make xattrs fully transactional - A few fixes to earlier large patchsets - Log recovery fixes so that we don't accidentally mark the log clean when log intent recovery fails - Fix some latent SOB errors - Clean up shutdown messages that get logged to dmesg - Fix a regression in the online shrink code - Fix a UAF in the buffer logging code if the fs goes offline - Fix uninitialized error variables - Fix a UAF in the CIL when commited log item callbacks race with a shutdown - Fix a bug where the CIL could hang trying to push part of the log ring buffer that hasn't been filled yet -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAmDXP38ACgkQ+H93GTRK tOsKzw//eHvEgeyBo7ek06GDsUph2kQVR9AJWE7MNMiBFxlmL8R9H225xJK7Qmcr YswcyEeDq8cNXbXDA249ueuMb+DxhZPY68hPK5BJ3KsbvL2RZV0lJCbk492l4cgb IvBJiG/MDo55km83tdr81AlmFYQM7rSQz5MbVogGxxsnp0ul3VpIrJZba8kPRDQ1 mZzH2fdlnE9Ozw/CfvjSgT1pySyFpxNeTRucYXUQil1hL1AGTBw7rGGNnccS090y u/EawQ4WJ131m8O3+WomUmaGyZFlWvTpHzukKxvrEvZ6AG+HpIhMcbZ5J6nkRTY4 xxhUBG2qNKIcgPmPwAGmx1cylcsOCNKQgp+fko9tAZjEkgT5cbCpqpjGgjNB0RCf pB0PY6idCFl9hmBpVgMWz2AZ9IsDmK54qufmLtzq/zN8cThzt6A95UUR0rGu5Kd8 CUmmdQTYl0GqlTTszCO2rw1+zRtcasMpBVmeYHDxy00bd1dHLUJ6o8DuXRYTTQti J/6CZVVD56jieRb+uvrOq4mhiPR2kynciiu1dXdY5kx79kKom6HMBBvtTl8b9kmh smWihfip7BTpz5vFzcwFmMxFwzW3K4LnDZl7qEGqXDEIHOL+pRWazU2yN3JZRGyd z4SQMJuER0HTTA0yO09c3/CX9onorhjUIMgQ9U25l1hdyFna0+o= =08Q9 -----END PGP SIGNATURE----- Merge tag 'xfs-5.14-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull xfs updates from Darrick Wong: "Most of the work this cycle has been on refactoring various parts of the codebase. The biggest non-cleanup changes are (1) reducing the number of cache flushes sent when writing the log; (2) a substantial number of log recovery fixes; and (3) I started accepting pull requests from contributors if the commits in their branches match what's been sent to the list. For a week or so I /had/ staged a major cleanup of the logging code from Dave Chinner, but it exposed so many lurking bugs in other parts of the logging and log recovery code that I decided to defer that patchset until we can address those latent bugs. Larger cleanups this time include walking the incore inode cache (me) and rework of the extended attribute code (Allison) to prepare it for adding logged xattr updates (and directory tree parent pointers) in future releases. Summary: - Refactor the buffer cache to use bulk page allocation - Convert agnumber-based AG iteration to walk per-AG structures - Clean up some unit conversions and other code warts - Reduce spinlock contention in the directio fastpath - Collapse all the inode cache walks into a single function - Remove indirect function calls from the inode cache walk code - Dramatically reduce the number of cache flushes sent when writing log buffers - Preserve inode sickness reports for longer - Rename xfs_eofblocks since it controls inode cache walks - Refactor the extended attribute code to prepare it for the addition of log intent items to make xattrs fully transactional - A few fixes to earlier large patchsets - Log recovery fixes so that we don't accidentally mark the log clean when log intent recovery fails - Fix some latent SOB errors - Clean up shutdown messages that get logged to dmesg - Fix a regression in the online shrink code - Fix a UAF in the buffer logging code if the fs goes offline - Fix uninitialized error variables - Fix a UAF in the CIL when commited log item callbacks race with a shutdown - Fix a bug where the CIL could hang trying to push part of the log ring buffer that hasn't been filled yet" * tag 'xfs-5.14-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (102 commits) xfs: don't wait on future iclogs when pushing the CIL xfs: Fix a CIL UAF by getting get rid of the iclog callback lock xfs: remove callback dequeue loop from xlog_state_do_iclog_callbacks xfs: don't nest icloglock inside ic_callback_lock xfs: Initialize error in xfs_attr_remove_iter xfs: fix endianness issue in xfs_ag_shrink_space xfs: remove dead stale buf unpin handling code xfs: hold buffer across unpin and potential shutdown processing xfs: force the log offline when log intent item recovery fails xfs: fix log intent recovery ENOSPC shutdowns when inactivating inodes xfs: shorten the shutdown messages to a single line xfs: print name of function causing fs shutdown instead of hex pointer xfs: fix type mismatches in the inode reclaim functions xfs: separate primary inode selection criteria in xfs_iget_cache_hit xfs: refactor the inode recycling code xfs: add iclog state trace events xfs: xfs_log_force_lsn isn't passed a LSN xfs: Fix CIL throttle hang when CIL space used going backwards xfs: journal IO cache flush reductions xfs: remove need_start_rec parameter from xlog_write() ... |
||
Linus Torvalds
|
e4aa67b023 |
JFS fixes for 5.14
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEIodevzQLVs53l6BhNqiEXrVAjGQFAmDeGXwACgkQNqiEXrVA jGTONw/+J9mdqQW4zrrIotoO49wKpPv0Ub/XJqT+cDrae91w/lrOct2g0U12aG/e zkVeGDhWF4iqsVhyAPx1U6Dh0/rg3JlCSr3l2NYk7WKGwQSOFINtrXPMUfz1P9h1 M/Cvz9XIkIzATeEd6yrGdQyw5bcSQu3uF8o71ufdKJfeNkAxlhigw690vePMXPFp YSmBgLVM1ntp2apJyJiFYVNJqfbDL2bVWG3a+ENGXjD+b/8IsShTKM6VyEXRWGKa M1RjEW7i5kvoPtmbV5tLkySete+Bumv8ZRGoAv306tgABjWRkAZN31EzdZfBe5Io 8pK5USGaSVauP9E0wXV4irfaAuYPp1uAsZqzhxbRXLtTsLKJKrZKxjq9kZON3FPd tGY1v462zBrj79oN++Z7/bDxwbcfJ+OPid2Fev6SlsYfTndTp1cseLDsef574/vo 1P6DgCHNabHWZcjeI2ubMIM+W3+pAwjWUeeLOedCa7IZ6VKTwx+8RPEDNAxMq7lO 6fs+NUtbEd/veaTmicJnllvld1HcqS+H/sPSS7tHhTtoMTVG2bdpzyvvxGzKOxq+ IQNnNOLwg6LsH3z+uenU+fhnm5Z/b+iZsMG3LgXALu6JCDaZf/ygvyQfhhJS5n5r MJfWP2ZSpEf3yYcsoKvgFafVXv6p2fnibfB/2ecmyQ6Lz54U6hc= =li00 -----END PGP SIGNATURE----- Merge tag 'jfs-5.14' of git://github.com/kleikamp/linux-shaggy Pull jfs updates from David Kleikamp: "JFS fixes for 5.14" * tag 'jfs-5.14' of git://github.com/kleikamp/linux-shaggy: jfs: Avoid field-overflowing memcpy() jfs: remove unnecessary oom message jfs: fix GPF in diFree fs/jfs: Fix missing error code in lmLogInit() jfs: Remove trailing semicolon in macros fs: Fix typo issue |
||
Linus Torvalds
|
ced4cca754 |
configfs updates for Linux 5.13
- fix a memleak in configfs_release_bin_file (Chung-Chiang Cheng) - implement the .read_iter and .write_iter (Bart Van Assche) - minor cleanups (Bart Van Assche, me) -----BEGIN PGP SIGNATURE----- iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmDfOe8LHGhjaEBsc3Qu ZGUACgkQD55TZVIEUYNbuA//dTCwt9U8+XIDeWatRJY2BFSTorNhaeayYiGDDnVo 7NVN/vw5qtt7UHo7hFBi918gh9IGSIbgyYZIZAV4/qCqnveNMnD/Zuwd8j0FHzu4 OvmjORj52cpzXiyJ87vJ+fGVjqe9/Vtrzr4IFyhJZQnz+c1L0NOgReAiLJtE+1C/ 8RvecwCvIxZVjw8SRjOZNCd/DFBx6nPbwsh0ZLkAiL6TQkV5erOUmFyoOAiXRQwB H+6fcrjGteoXXciGmvRtfIaJEO5o2yE4pXEsoYv2aDBF5dtpq/wti8CV7bWSIXiV HI90UrVDO+bK94DKC0JmYFEAxi7HmX073OWu0xBgXjpUnc1kepJ+9DJ74Y43QwwF C0eHKu4b/nP/50c/7UxqUSmS23c9YiJawkYZjxbnxklN9QhRs8v61htOO6i9CFnu KjePcLs07sn6AEa16taCV/+iwfgyul047jegrZZSTNioBPgpdMX+j2fzt2FTWioJ zfVLsiBqvKDKXEkulsTMMFmO4Un2kcX7cTX7v9DclGvpCuEoOpPUDERS5H8+DkqV q+O2HPohFdFItcWge58eCvZ0OJ43Px07Mpn6WH48VLCDLTg7H7Z/85yEO6Wg+a6V JlgwdoAlHo5BHfS2w7PtkblbaJH9MQRc6dvSuv/sE1x8AouWze7wkfVb0ZH0X1GF Xjo= =dquw -----END PGP SIGNATURE----- Merge tag 'configfs-5.13' of git://git.infradead.org/users/hch/configfs Pull configfs updates from Christoph Hellwig: - fix a memleak in configfs_release_bin_file (Chung-Chiang Cheng) - implement the .read_iter and .write_iter (Bart Van Assche) - minor cleanups (Bart Van Assche, me) * tag 'configfs-5.13' of git://git.infradead.org/users/hch/configfs: configfs: simplify configfs_release_bin_file configfs: fix memleak in configfs_release_bin_file configfs: implement the .read_iter and .write_iter methods configfs: drop pointless kerneldoc comments configfs: fix the kerneldoc comment for configfs_create_bin_file |
||
Linus Torvalds
|
e72b069609 |
dma-mapping updates for Linux 5.14
- a trivivial whitespace fix (Zhen Lei) - report -EEXIST errors in add_dma_entry (Hamza Mahfooz) -----BEGIN PGP SIGNATURE----- iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmDfOS4LHGhjaEBsc3Qu ZGUACgkQD55TZVIEUYP8sBAAq1qOMdxAsOtfdl4MrUP3/LrxL9FSN6ThMeaZy3QV jUgcIEZ8To8KAXoEAu0LzIDhI6xGfAcwzavNviCPzoyT4OPzTOZQvHK4AOotruu0 qQ/Xa9iSputWNA/eV8eMLRYKRZJv0MB0su4mqn9h/ruxRENm/iBKHj30Q1JrCERQ bhbEm1Bnw6BZqjQrhn4hEKq7UVVTUeVOITDXmj4TiYQJPLsr2RFgZa1UzOx1xbvu x1HzzRNeBRjri2yIn562eIuIPno+d6NtLDPlCXD46dqd6VUclV0hYy6irooZY0uY 0gnXo35NKB1DG45he6TIm/LTKMjUh7glGLeNY6Id1ZcZJWOTf3zCSs3Z/BiX0aXK ituMdk56FjFK2aXExioUJ3heZ2lrn2WHNMeZ9wNcZ38UPJNo/dfFXXfYbsGp+TGa XsS6QbPW2CmaVz6nktM6ra0VaUNWF/dHY2IpAatMnPfGJbrvmeYLoRQZSvkGwB64 k95Vu+Q8BAydb9cjLqs5EIZLAPGPsVT6bWZWYUPkc74I7Ke8c03r6K81IwAky9mS 5EtitaDFQPOlUFwI79RLgg4I+xPEMw3u/mmYLP6JH4WhPjHWk7SeOP1p6EBLCQHE 7OJLVJxmsrG7VLK+YW7N9q7pSokij0ghpNAeYv7CtxA+tiEPuEYx39Td7+btiP6f 0KQ= =QIFu -----END PGP SIGNATURE----- Merge tag 'dma-mapping-5.14' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - a trivivial whitespace fix (Zhen Lei) - report -EEXIST errors in add_dma_entry (Hamza Mahfooz) * tag 'dma-mapping-5.14' of git://git.infradead.org/users/hch/dma-mapping: dma-debug: report -EEXIST errors in add_dma_entry dma-mapping: remove a trailing space |
||
Linus Torvalds
|
cd3eb7efaa |
IOMMU Updates for Linux v5.14
Including: - SMMU Updates from Will Deacon: - SMMUv3: Support stalling faults for platform devices - SMMUv3: Decrease defaults sizes for the event and PRI queues - SMMUv2: Support for a new '->probe_finalize' hook, needed by Nvidia - SMMUv2: Even more Qualcomm compatible strings - SMMUv2: Avoid Adreno TTBR1 quirk for DB820C platform - Intel VT-d updates from Lu Baolu: - Convert Intel IOMMU to use sva_lib helpers in iommu core - ftrace and debugfs supports for page fault handling - Support asynchronous nested capabilities - Various misc cleanups - Support for new VIOT ACPI table to make the VirtIO IOMMU: available on x86 - Add the amd_iommu=force_enable command line option to enable the IOMMU on platforms where they are known to cause problems - Support for version 2 of the Rockchip IOMMU - Various smaller fixes, cleanups and refactorings -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAmDexqwACgkQK/BELZcB GuOy/w//cr331yKDZDF8DSkWxUHYNXitBlW12nShgYselhlREb5mB1vmpOHuWKus K++w7tWA19/qMs/p7yPoS+zCEA3xiZjO+OgyjxTzkxfaQD4GMmP7hK+ItRCXiz9E 6QZXLOqexniydpa+KEg3rewibcrJwgIpz6QHT8FBrMISiEPRUw5oLeytv6rNjPWx WyBRNA+TjNvnybFbWp9gTdgWCshygJMv1WlU7ySZcH45Mq4VKxS4Kihe1fTLp38s vBqfRuUHhYcuNmExgjBuK3y8dq7hU8XelKjSm2yvp9srGbhD0NFT1Ng7iZQj43bi Eh2Ic8O9miBvm/uJ0ug6PGcEUcdfoHf/PIMqLZMRBj79+9RKxNBzWOAkBd2RwH3A Wy98WdOsX4+3MB5EKznxnIQMMA5Rtqyy/gLDd5j4xZnL5Ha3j0oQ9WClD+2iMfpV v150GXNOKNDNNjlzXulBxNYzUOK8KKxse9OPg8YDevZPEyVNPH2yXZ6xjoe7SYCW FGhaHXdCfRxUk9lsQNtb23CNTKl7Qd6JOOJLZqAfpWzQjQu4wB4kfbnv0zEhMAvi XxVqijV/XTWyVXe3HkzByHnqQxrn7YKbC/Ql/BMmk8kbwFvpJbFIaTLvRVsBnE2r 8Edn5Cjuz4CC83YPQ3EBQn85TpAaUNMDRMc1vz5NrQTqJTzYZag= =IxNB -----END PGP SIGNATURE----- Merge tag 'iommu-updates-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - SMMU Updates from Will Deacon: - SMMUv3: - Support stalling faults for platform devices - Decrease defaults sizes for the event and PRI queues - SMMUv2: - Support for a new '->probe_finalize' hook, needed by Nvidia - Even more Qualcomm compatible strings - Avoid Adreno TTBR1 quirk for DB820C platform - Intel VT-d updates from Lu Baolu: - Convert Intel IOMMU to use sva_lib helpers in iommu core - ftrace and debugfs supports for page fault handling - Support asynchronous nested capabilities - Various misc cleanups - Support for new VIOT ACPI table to make the VirtIO IOMMU available on x86 - Add the amd_iommu=force_enable command line option to enable the IOMMU on platforms where they are known to cause problems - Support for version 2 of the Rockchip IOMMU - Various smaller fixes, cleanups and refactorings * tag 'iommu-updates-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (66 commits) iommu/virtio: Enable x86 support iommu/dma: Pass address limit rather than size to iommu_setup_dma_ops() ACPI: Add driver for the VIOT table ACPI: Move IOMMU setup code out of IORT ACPI: arm64: Move DMA setup operations out of IORT iommu/vt-d: Fix dereference of pointer info before it is null checked iommu: Update "iommu.strict" documentation iommu/arm-smmu: Check smmu->impl pointer before dereferencing iommu/arm-smmu-v3: Remove unnecessary oom message iommu/arm-smmu: Fix arm_smmu_device refcount leak in address translation iommu/arm-smmu: Fix arm_smmu_device refcount leak when arm_smmu_rpm_get fails iommu/vt-d: Fix linker error on 32-bit iommu/vt-d: No need to typecast iommu/vt-d: Define counter explicitly as unsigned int iommu/vt-d: Remove unnecessary braces iommu/vt-d: Removed unused iommu_count in dmar domain iommu/vt-d: Use bitfields for DMAR capabilities iommu/vt-d: Use DEVICE_ATTR_RO macro iommu/vt-d: Fix out-bounds-warning in intel/svm.c iommu/vt-d: Add PRQ handling latency sampling ... |
||
Linus Torvalds
|
35e43538af |
linux-kselftest-next-5.14-rc1
This Kselftest update for Linux 5.14-rc1 consists of fixes to existing tests and framework: -- migrate sgx test to kselftest harness -- add new test cases to sgx test -- ftrace test fix event-no-pid on 1-core machine -- splice test adjust for handler fallback removal -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmDfQGUACgkQCwJExA0N Qxw6hw/+OEBEs+eHlDbbxHb9fBEg8kWls0AJKLAD2DEJOt1eARzyVa4J1MUpS6yK jJi/k0wKvqhMbdQgEEL3oSVvr9JgmOell0OkLzK9tx4HgEou89GnuO+wVRAeG87o QGDVWOa76GZwC47rvDDt9i9io075O1fol9HPgPZIdyVFcFgu45PVmRoSK4vaKUpm m5VtEznCxcL60vD+u2XhbBO2QMUi4OoBrNdJpnkBx/U6iCv5ZQbpN3OoDgdhltXC raQChLmy9bi2uYXskklcY1xGftyUiiWwfaiz7w6a65C2DedsUoD1lwhnaLlsJmSh KTOx9r5xF5bgRsdbWefIc7yRk9nVNczVSRs+x8aGlXT3p+e9jwaSXWXvCaZowYOV M+R0nCgmpOoGl5jhgeeu+P+JyC7aRRtMhVTGOiuUzyAPZbaIur1JVjoHpRHCVZle XjkCbq+VZ7Qb6pZ5sM+ve20GIw+J8/pDc4qtpttqb+hLtwe5rJj+Ydw2GQ/yZ30c uFwfdvGQMVMHjvPaL8IQb6WE3tiBhvJiUYQaRdR83HaWFstI14fFHgm7Zed9I19b TAgoDZ4P08cROtTbopbjRX1B3cnx/sUrFjwW8cTstIkedzo3rHbdf4UvV/h96O+S BjrZfsbEQBaCLW8KNu9wO/id+sPXeYwuW4HCkE0R0H1ZJI4Fgio= =6gOE -----END PGP SIGNATURE----- Merge tag 'linux-kselftest-next-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest update from Shuah Khan: "Fixes to existing tests and framework: - migrate sgx test to kselftest harness - add new test cases to sgx test - ftrace test fix event-no-pid on 1-core machine - splice test adjust for handler fallback removal" * tag 'linux-kselftest-next-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/sgx: remove checks for file execute permissions selftests/ftrace: fix event-no-pid on 1-core machine selftests/sgx: Refine the test enclave to have storage selftests/sgx: Add EXPECT_EEXIT() macro selftests/sgx: Dump enclave memory map selftests/sgx: Migrate to kselftest harness selftests/sgx: Rename 'eenter' and 'sgx_call_vdso' selftests: timers: rtcpie: skip test if default RTC device does not exist selftests: lib.mk: Also install "config" and "settings" selftests: splice: Adjust for handler fallback removal selftests/tls: Add {} to avoid static checker warning selftests/resctrl: Fix incorrect parsing of option "-t" |
||
Linus Torvalds
|
a48ad6e7a3 |
linux-kselftest-kunit-fixes-5.14-rc1
This KUnit update for Linux 5.14-rc1 consists of fixes and features: -- add support for skipped tests -- introduce kunit_kmalloc_array/kunit_kcalloc() helpers -- add gnu_printf specifiers -- add kunit_shutdown -- add unit test for filtering suites by names -- convert lib/test_list_sort.c to use KUnit -- code organization moving default config to tools/testing/kunit -- refactor of internal parser input handling -- cleanups and updates to documentation -- code cleanup related to casts -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmDfNHgACgkQCwJExA0N QxzU5g/+ORbcbE5jhumo82xYUCGTScgIqPllNO000Vk9xydMqwx6tpY5puV0ig2z 5X7pxKEQTnype58yzY5mS1p336ryIx3q+AwEownxTW3YurXo2naQ59ZPjEvlAV+E h+DMYLzEjrxzcyJATw02uC9YLUZ3w6FPJfiXViIv93YYrtcnM0u6JpwG0yfBlI4v 4KKB2Xu4K7T90C9/ADFYFKX3mjXQl5fQwvIdtA7wS90Cgq52LKp2mvg1XEiZE5d+ 0dkTZ4Zo8TxxHt665o7vfnUjQQNmh45iGlW65wONxfAPb8BPoneGjVKWQTnN0Hor W+93ZPbMuFMSSKJuoHY9U7sP5VySKvaiIYaGdi6prnZZu0zUabKnLZ6FOy7kEdfs v09ulCBTVLslixVgNcp/kD9T+G/SXwCF5YBMAiMDQ0GNfUqlFtBkEA3gd44KwMI0 KwCcOgUSiaCkqyzOz/VeQsu/nhA5jdMO0KjiAs7Z3e7r7O/qKFs/ll7hZgDNCWSC q8eIrcBkSL0EGgXR1iZ4AtGm8op6KKd4ACBM8NdtTyoGFl1npZOgZnHoIsy35G9K 9mhc7eXSoaDGqy9dONL1Tc8Neg7qLTXQNp2radqsnAAgNPUrJuC7+8YC+DdIsjBH W7OyMjpfbwPws5rP4CS+JdwL+nQprKXZvFIhWGYhkDK44MbOngw= =5QAv -----END PGP SIGNATURE----- Merge tag 'linux-kselftest-kunit-fixes-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit update from Shuah Khan: "Fixes and features: - add support for skipped tests - introduce kunit_kmalloc_array/kunit_kcalloc() helpers - add gnu_printf specifiers - add kunit_shutdown - add unit test for filtering suites by names - convert lib/test_list_sort.c to use KUnit - code organization moving default config to tools/testing/kunit - refactor of internal parser input handling - cleanups and updates to documentation - code cleanup related to casts" * tag 'linux-kselftest-kunit-fixes-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (29 commits) kunit: add unit test for filtering suites by names kasan: test: make use of kunit_skip() kunit: test: Add example tests which are always skipped kunit: tool: Support skipped tests in kunit_tool kunit: Support skipped tests thunderbolt: test: Reinstate a few casts of bitfields kunit: tool: internal refactor of parser input handling lib/test: convert lib/test_list_sort.c to use KUnit kunit: introduce kunit_kmalloc_array/kunit_kcalloc() helpers kunit: Remove the unused all_tests.config kunit: Move default config from arch/um -> tools/testing/kunit kunit: arch/um/configs: Enable KUNIT_ALL_TESTS by default kunit: Add gnu_printf specifiers lib/cmdline_kunit: Remove a cast which are no-longer required kernel/sysctl-test: Remove some casts which are no-longer required thunderbolt: test: Remove some casts which are no longer required mmc: sdhci-of-aspeed: Remove some unnecessary casts from KUnit tests iio: Remove a cast in iio-test-format which is no longer required device property: Remove some casts in property-entry-test Documentation: kunit: Clean up some string casts in examples ... |
||
Linus Torvalds
|
019b3fd94b |
powerpc updates for 5.14
- A big series refactoring parts of our KVM code, and converting some to C. - Support for ARCH_HAS_SET_MEMORY, and ARCH_HAS_STRICT_MODULE_RWX on some CPUs. - Support for the Microwatt soft-core. - Optimisations to our interrupt return path on 64-bit. - Support for userspace access to the NX GZIP accelerator on PowerVM on Power10. - Enable KUAP and KUEP by default on 32-bit Book3S CPUs. - Other smaller features, fixes & cleanups. Thanks to: Andy Shevchenko, Aneesh Kumar K.V, Arnd Bergmann, Athira Rajeev, Baokun Li, Benjamin Herrenschmidt, Bharata B Rao, Christophe Leroy, Daniel Axtens, Daniel Henrique Barboza, Finn Thain, Geoff Levand, Haren Myneni, Jason Wang, Jiapeng Chong, Joel Stanley, Jordan Niethe, Kajol Jain, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Paul Mackerras, Russell Currey, Sathvika Vasireddy, Shaokun Zhang, Stephen Rothwell, Sudeep Holla, Suraj Jitindar Singh, Tom Rix, Vaibhav Jain, YueHaibing, Zhang Jianhua, Zhen Lei. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmDfFS4THG1wZUBlbGxl cm1hbi5pZC5hdQAKCRBR6+o8yOGlgFxHEAC88NJ+Gz87LiTQFt6QjhziBaJUd+sY uqADPRROr4P50O8PjYZbMi2qbXzOlLkZO4wJWX7jpZ1F9KmbPNqY2shD8h4ahyge F/uqzBW1FXBJfnDEKdU2MzalkeTP+dwxLZyouUamjDCGNLFjOV4x/Fft5otOdXjO k9uO6yoGyOkWYzjC+Y/irNPlIDDByB/+bD92Cb52Y2mXMDDEnx4JzbtkeJW+8udT Sjn3bWzeL+dz5GehjMKwK4+SptNiyQGOgM8FwtnKUMvgzxv04DqCGjr9YC12L2Z7 VoFZc4GzVgtf8DZg4fJ3KG5aG2nH3Tui7jc9lUckdrxixDAZw5wSG7CQ39gFb/5+ 7A4fEJk4Z3h5llibwxAZrC7wV8ZDDXn8oRFzRcOJjfxYaD+ohOOyWHIebwkdiXYx nfYI7sBcScDLXeBvHtDra2GJpbFSpVL3S/QNhhi1vKVNrFSyAgbAybcVL2xPLZ6+ 8Mh7A8xt+hf2bo9AXuYJDo9mwXWfg1093d0kT+AslcRhZioBk18c2AiZLIz0FzuL Ua/e5FPb99x9LSdcZHvaAXBoHT2iTgDyCyDa3gkIesyuRX6ggHoFcVQuvdDcbJ9d H8LK+Tahy1Y+E5b6KdtU8mDEGE+QG+CWLnwQ6YSCaL/MYgaFzNa32Jdj1fmztSBC cttP43kHZ7ljTw== =zo4d -----END PGP SIGNATURE----- Merge tag 'powerpc-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - A big series refactoring parts of our KVM code, and converting some to C. - Support for ARCH_HAS_SET_MEMORY, and ARCH_HAS_STRICT_MODULE_RWX on some CPUs. - Support for the Microwatt soft-core. - Optimisations to our interrupt return path on 64-bit. - Support for userspace access to the NX GZIP accelerator on PowerVM on Power10. - Enable KUAP and KUEP by default on 32-bit Book3S CPUs. - Other smaller features, fixes & cleanups. Thanks to: Andy Shevchenko, Aneesh Kumar K.V, Arnd Bergmann, Athira Rajeev, Baokun Li, Benjamin Herrenschmidt, Bharata B Rao, Christophe Leroy, Daniel Axtens, Daniel Henrique Barboza, Finn Thain, Geoff Levand, Haren Myneni, Jason Wang, Jiapeng Chong, Joel Stanley, Jordan Niethe, Kajol Jain, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Paul Mackerras, Russell Currey, Sathvika Vasireddy, Shaokun Zhang, Stephen Rothwell, Sudeep Holla, Suraj Jitindar Singh, Tom Rix, Vaibhav Jain, YueHaibing, Zhang Jianhua, and Zhen Lei. * tag 'powerpc-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (218 commits) powerpc: Only build restart_table.c for 64s powerpc/64s: move ret_from_fork etc above __end_soft_masked powerpc/64s/interrupt: clean up interrupt return labels powerpc/64/interrupt: add missing kprobe annotations on interrupt exit symbols powerpc/64: enable MSR[EE] in irq replay pt_regs powerpc/64s/interrupt: preserve regs->softe for NMI interrupts powerpc/64s: add a table of implicit soft-masked addresses powerpc/64e: remove implicit soft-masking and interrupt exit restart logic powerpc/64e: fix CONFIG_RELOCATABLE build warnings powerpc/64s: fix hash page fault interrupt handler powerpc/4xx: Fix setup_kuep() on SMP powerpc/32s: Fix setup_{kuap/kuep}() on SMP powerpc/interrupt: Use names in check_return_regs_valid() powerpc/interrupt: Also use exit_must_hard_disable() on PPC32 powerpc/sysfs: Replace sizeof(arr)/sizeof(arr[0]) with ARRAY_SIZE powerpc/ptrace: Refactor regs_set_return_{msr/ip} powerpc/ptrace: Move set_return_regs_changed() before regs_set_return_{msr/ip} powerpc/stacktrace: Fix spurious "stale" traces in raise_backtrace_ipi() powerpc/pseries/vas: Include irqdomain.h powerpc: mark local variables around longjmp as volatile ... |
||
Linus Torvalds
|
4cad671979 |
asm-generic/unaligned: Unify asm/unaligned.h around struct helper
The get_unaligned()/put_unaligned() helpers are traditionally architecture specific, with the two main variants being the "access-ok.h" version that assumes unaligned pointer accesses always work on a particular architecture, and the "le-struct.h" version that casts the data to a byte aligned type before dereferencing, for architectures that cannot always do unaligned accesses in hardware. Based on the discussion linked below, it appears that the access-ok version is not realiable on any architecture, but the struct version probably has no downsides. This series changes the code to use the same implementation on all architectures, addressing the few exceptions separately. Link: https://lore.kernel.org/lkml/75d07691-1e4f-741f-9852-38c0b4f520bc@synopsys.com/ Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100363 Link: https://lore.kernel.org/lkml/20210507220813.365382-14-arnd@kernel.org/ Link: git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git unaligned-rework-v2 Link: https://lore.kernel.org/lkml/CAHk-=whGObOKruA_bU3aPGZfoDqZM1_9wBkwREp0H0FgR-90uQ@mail.gmail.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmDfFx4ACgkQmmx57+YA GNkqzRAAjdlIr8M+xI2CyT0/A9tswYfLMeWejmYopq3zlxI6RnvPiJJDIdY2I8US 1npIiDo55w061CnXL9rV65ocL3XmGu1mabOvgM6ATsec+8t4WaXBV9tysxTJ9ea0 ltLTa2P5DXWALvWiVMTME7hFaf1cW+8Uqt3LmXxDp2l5zasXajCHAH6YokON2PfM CsaRhwSxIu8Sbnu/IQGBI9JW5UXsBfKSyUwtM0OwP7jFOuIeZ4WBVA+j6UxONnFC wouKmAM/ThoOsaV9aP4EZLIfBx8d4/hfYQjZ958kYXurerruYkJeEqdIRbV0QqTy 2O6ZrJ6uqPlzfWz9h458me2dt98YEtALHV/3DCWUcBfHmUQtxElyJYEhG0YjVF3H 5RYtjw8Q2LS/QR5ask1Xn0JfT89rRnLi2migAtsA4Ce70JP4Us6wGobkj4SHlgDt P7+eVq2Mkhqw/kmV8N4p+ZS5lpkK0JniDN+ONDhkZqHL/zXG/HQzx9wLV69jlvo2 ASevKxITdi+bKHWs5ANungkBOnBUQZacq46mVyi4HPDwMAFyWvVYTbFumy9koagQ o9NEgX3RsZcxxi7bU1xuFPFMLMlUQT3Nb30+84B4fKe9FmvHC1hizTiCnp7q4bZr z6a6AMHke7YLqKZOqzTJGRR3lPoZZDCb775SAd70LQp6XPZXOHs= =IY5U -----END PGP SIGNATURE----- Merge tag 'asm-generic-unaligned-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm/unaligned.h unification from Arnd Bergmann: "Unify asm/unaligned.h around struct helper The get_unaligned()/put_unaligned() helpers are traditionally architecture specific, with the two main variants being the "access-ok.h" version that assumes unaligned pointer accesses always work on a particular architecture, and the "le-struct.h" version that casts the data to a byte aligned type before dereferencing, for architectures that cannot always do unaligned accesses in hardware. Based on the discussion linked below, it appears that the access-ok version is not realiable on any architecture, but the struct version probably has no downsides. This series changes the code to use the same implementation on all architectures, addressing the few exceptions separately" Link: https://lore.kernel.org/lkml/75d07691-1e4f-741f-9852-38c0b4f520bc@synopsys.com/ Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100363 Link: https://lore.kernel.org/lkml/20210507220813.365382-14-arnd@kernel.org/ Link: git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git unaligned-rework-v2 Link: https://lore.kernel.org/lkml/CAHk-=whGObOKruA_bU3aPGZfoDqZM1_9wBkwREp0H0FgR-90uQ@mail.gmail.com/ * tag 'asm-generic-unaligned-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic: simplify asm/unaligned.h asm-generic: uaccess: 1-byte access is always aligned netpoll: avoid put_unaligned() on single character mwifiex: re-fix for unaligned accesses apparmor: use get_unaligned() only for multi-byte words partitions: msdos: fix one-byte get_unaligned() asm-generic: unaligned always use struct helpers asm-generic: unaligned: remove byteshift helpers powerpc: use linux/unaligned/le_struct.h on LE power7 m68k: select CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS sh: remove unaligned access for sh4a openrisc: always use unaligned-struct header asm-generic: use asm-generic/unaligned.h for most architectures |
||
Linus Torvalds
|
406254918b |
perf tools changes for v5.14:
Tools: - Add cgroup support for 'perf top' (-G). - Add support for KVM MSRs in 'perf kvm stat' - Support probes on init functions in 'perf probe', to support the bootconfig format. - Improve error reporting in 'perf probe'. - No need to synthesize BUILD_ID records in 'perf inject' if the MMAP2 records have build ids already. - Allow toggling source code ('s' hotkey) in 'perf annotate' in all lines. - Add itrace options support to 'perf annotate'. - Support to custom DSO filters for 'perf script'. Hardware enablement: - Support the HYBRID_TOPOLOGY and HYBRID_CPU_PMU_CAPS features in the perf.data file header. - Support PMU prefix for mem-load and mem-store events, to support hybrid (BIG little) CPUs such as Intel's Alderlake. - Support hybrid CPUs in 'perf mem' and 'perf c2c'. Hardware tracing: - Intel PT now supports tracing KVM guests. - Timestamp improvements for ARM's Coresight. Build: - Add 'make -C tools/perf build-test' entries for libopencsd/CORESIGHT=1 and libbpf/LIBBPF_DYNAMIC=1. - Use bison's --file-prefix-map option to avoid storing full paths when using O= in the perf build. Tests: - Improve the 'perf test' entries for libpfm4 and BPF counters. Misc: - Sync msr-index.h, mount.h, kvm headers with the kernel originals. - Add vendor events and metrics for Intel's Icelake Server & Client. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYN5WhAAKCRCyPKLppCJ+ J3b9APwO5iDjSMvVgKT84njXo1EqURMz6nmV3kkjBkaMo0KK2wEAvXysIEgwx1cu hakfFw63ztxVQctcWShOzP7jnJOOwwg= =PpGz -----END PGP SIGNATURE----- Merge tag 'perf-tools-for-v5.14-2021-07-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tool updates from Arnaldo Carvalho de Melo: "Tools: - Add cgroup support for 'perf top' (-G). - Add support for KVM MSRs in 'perf kvm stat' - Support probes on init functions in 'perf probe', to support the bootconfig format. - Improve error reporting in 'perf probe'. - No need to synthesize BUILD_ID records in 'perf inject' if the MMAP2 records have build ids already. - Allow toggling source code ('s' hotkey) in 'perf annotate' in all lines. - Add itrace options support to 'perf annotate'. - Support to custom DSO filters for 'perf script'. Hardware enablement: - Support the HYBRID_TOPOLOGY and HYBRID_CPU_PMU_CAPS features in the perf.data file header. - Support PMU prefix for mem-load and mem-store events, to support hybrid (BIG little) CPUs such as Intel's Alderlake. - Support hybrid CPUs in 'perf mem' and 'perf c2c'. Hardware tracing: - Intel PT now supports tracing KVM guests. - Timestamp improvements for ARM's Coresight. Build: - Add 'make -C tools/perf build-test' entries for libopencsd/CORESIGHT=1 and libbpf/LIBBPF_DYNAMIC=1. - Use bison's --file-prefix-map option to avoid storing full paths when using O= in the perf build. Tests: - Improve the 'perf test' entries for libpfm4 and BPF counters. Misc: - Sync msr-index.h, mount.h, kvm headers with the kernel originals. - Add vendor events and metrics for Intel's Icelake Server & Client" * tag 'perf-tools-for-v5.14-2021-07-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (123 commits) perf session: Add missing evlist__delete when deleting a session perf annotate: Allow 's' on source code lines perf dlfilter: Add object_code() to perf_dlfilter_fns perf dlfilter: Add attr() to perf_dlfilter_fns perf dlfilter: Add srcline() to perf_dlfilter_fns perf dlfilter: Add insn() to perf_dlfilter_fns perf dlfilter: Add resolve_address() to perf_dlfilter_fns perf build: Install perf_dlfilter.h perf script: Add option to pass arguments to dlfilters perf script: Add option to list dlfilters perf script: Add dlfilter__filter_event_early() perf script: Add API for filtering via dynamically loaded shared object perf llvm: Return -ENOMEM when asprintf() fails perf cs-etm: Delay decode of non-timeless data until cs_etm__flush_events() tools headers UAPI: Synch KVM's svm.h header with the kernel tools kvm headers arm64: Update KVM headers from the kernel sources tools headers UAPI: Sync linux/kvm.h with the kernel sources tools headers cpufeatures: Sync with the kernel sources tools include UAPI: Update linux/mount.h copy tools arch x86: Sync the msr-index.h copy with the kernel sources ... |
||
Linus Torvalds
|
71bd934101 |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton: "190 patches. Subsystems affected by this patch series: mm (hugetlb, userfaultfd, vmscan, kconfig, proc, z3fold, zbud, ras, mempolicy, memblock, migration, thp, nommu, kconfig, madvise, memory-hotplug, zswap, zsmalloc, zram, cleanups, kfence, and hmm), procfs, sysctl, misc, core-kernel, lib, lz4, checkpatch, init, kprobes, nilfs2, hfs, signals, exec, kcov, selftests, compress/decompress, and ipc" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits) ipc/util.c: use binary search for max_idx ipc/sem.c: use READ_ONCE()/WRITE_ONCE() for use_global_lock ipc: use kmalloc for msg_queue and shmid_kernel ipc sem: use kvmalloc for sem_undo allocation lib/decompressors: remove set but not used variabled 'level' selftests/vm/pkeys: exercise x86 XSAVE init state selftests/vm/pkeys: refill shadow register after implicit kernel write selftests/vm/pkeys: handle negative sys_pkey_alloc() return code selftests/vm/pkeys: fix alloc_random_pkey() to make it really, really random kcov: add __no_sanitize_coverage to fix noinstr for all architectures exec: remove checks in __register_bimfmt() x86: signal: don't do sas_ss_reset() until we are certain that sigframe won't be abandoned hfsplus: report create_date to kstat.btime hfsplus: remove unnecessary oom message nilfs2: remove redundant continue statement in a while-loop kprobes: remove duplicated strong free_insn_page in x86 and s390 init: print out unknown kernel parameters checkpatch: do not complain about positive return values starting with EPOLL checkpatch: improve the indented label test checkpatch: scripts/spdxcheck.py now requires python3 ... |
||
Linus Torvalds
|
3dbdb38e28 |
Merge branch 'for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo: - cgroup.kill is added which implements atomic killing of the whole subtree. Down the line, this should be able to replace the multiple userland implementations of "keep killing till empty". - PSI can now be turned off at boot time to avoid overhead for configurations which don't care about PSI. * 'for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: make per-cgroup pressure stall tracking configurable cgroup: Fix kernel-doc cgroup: inline cgroup_task_freeze() tests/cgroup: test cgroup.kill tests/cgroup: move cg_wait_for(), cg_prepare_for_wait() tests/cgroup: use cgroup.kill in cg_killall() docs/cgroup: add entry for cgroup.kill cgroup: introduce cgroup.kill |
||
Linus Torvalds
|
e267992f9e |
Merge branch 'for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu
Pull percpu updates from Dennis Zhou: - percpu chunk depopulation - depopulate backing pages for chunks with empty pages when we exceed a global threshold without those pages. This lets us reclaim a portion of memory that would previously be lost until the full chunk would be freed (possibly never). - memcg accounting cleanup - previously separate chunks were managed for normal allocations and __GFP_ACCOUNT allocations. These are now consolidated which cleans up the code quite a bit. - a few misc clean ups for clang warnings * 'for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu: percpu: optimize locking in pcpu_balance_workfn() percpu: initialize best_upa variable percpu: rework memcg accounting mm, memcg: introduce mem_cgroup_kmem_disabled() mm, memcg: mark cgroup_memory_nosocket, nokmem and noswap as __ro_after_init percpu: make symbol 'pcpu_free_slot' static percpu: implement partial chunk depopulation percpu: use pcpu_free_slot instead of pcpu_nr_slots - 1 percpu: factor out pcpu_check_block_hint() percpu: split __pcpu_balance_workfn() percpu: fix a comment about the chunks ordering |
||
Linus Torvalds
|
19b4385922 |
- added support for OpeneEmbed SOM9331 board
- Ingenic fixes/improvments - other fixes and cleanups -----BEGIN PGP SIGNATURE----- iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAmDdyJQaHHRzYm9nZW5k QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHBlyRAAhj5dC1EyGsc0cWyzC8ZU Nh45vzMCSxa4mxAelNjuVKdE0h7gLeRa8/sKPV+EcS3ZFcSfZQeIHEbH9Na3EDS7 KtUZmkjrHCDdRTh7kou7E7mb716HvoQEyq6d1VyZOahyqf2ZcjIsFinK+As+4wBV JcXJMcpUWemI4Ojm8cbmNWQW3V2Ty9qLNUa6BpmntbdOdYowTih9QWHv2u1YsOR7 R6LJXdyo6V1RieeqfZaWXTQtN8yyXYhBewLIy0DxBAm329f5sRHUVd9/ZD2RMByD 1weEhbs0jhmYZFSfkwZ8SjAb4GkusjNTnDiK4Rsuz6pQK0BIGNAV0Mrnedq+i5eD wrrTI1/envStDpj9XGlSNajcaQGpTza1V1uaCIm4EanOMMTBc8DTXaj7MCOlTD8j fkNE3ykfloVSSzZAWCmcpV9fBsFwQp3m+cWrtIAAnOJDK+NV5FfABUwFHKnBUpxG YOUNCed0WJFx++xrHKylt8hWILLEATLHh1h5vDsEYJi4gwt2KxCSYQBGgSYKa1At tOUa5UINTMvpe4U9GEjHh6f1VedtUNYUzXjD5g2cn62d81RCSx3hB1KkfQSKtaDw H9sR8d+rDFt4fK9T/HPZ3EyM2i9FkZNv+CulfGNd3M0vnF8+qX2xRehWrqhwBBi0 2p7V9/t5TPhziAfJySKX+Jg= =j2kH -----END PGP SIGNATURE----- Merge tag 'mips_5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - add support for OpeneEmbed SOM9331 board - Ingenic fixes/improvments - other fixes and cleanups * tag 'mips_5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (39 commits) MIPS: Fix PKMAP with 32-bit MIPS huge page support MIPS: CI20: Add second percpu timer for SMP. MIPS: CI20: Reduce clocksource to 750 kHz. MIPS: Ingenic: Add MAC syscon nodes for Ingenic SoCs. dt-bindings: clock: Add documentation for MAC PHY control bindings. MIPS: X1830: Respect cell count of common properties. MIPS: set mips32r5 for virt extensions MIPS: loongsoon64: Reserve memory below starting pfn to prevent Oops MIPS: MT extensions are not available on MIPS32r1 mips/kvm: Use BUG_ON instead of if condition followed by BUG MIPS: OCTEON: octeon-usb: Use devm_platform_get_and_ioremap_resource() MIPS: add PMD table accounting into MIPS'pmd_alloc_one MIPS: Loongson64: fix spelling of SPDX tag MIPS: ingenic: rs90: Add dedicated VRAM memory region MIPS: ingenic: gcw0: Set codec to cap-less mode for FM radio MIPS: ingenic: jz4780: Fix I2C nodes to match DT doc MIPS: ingenic: Select CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER MIPS: Kconfig: ingenic: Ensure MACH_INGENIC_GENERIC selects all SoCs MIPS: cpu-probe: Fix FPU detection on Ingenic JZ4760(B) MIPS: boot: Support specifying UART port on Ingenic SoCs ... |
||
Linus Torvalds
|
a32b344e6f |
This is the bulk of pin control changes for the v5.14 kernel:
New drivers: - Last merge window we created a driver for the Ralink RT2880. We are now moving the Ralink SoC pin control drivers out of the MIPS architecture code and into the pin control subsystem. This concerns RT288X, MT7620, RT305X, RT3883 and MT7621. - Qualcomm SM6125 SoC pin control driver. - Qualcomm spmi-gpio support for PM7325. - Qualcomm spmi-mpp also handles PMI8994 (just a compatible string) - Mediatek MT8365 SoC pin controller. - New device HID for the AMD GPIO controller. Improvements: - Pin bias config support for a slew of Renesas pin controllers. - Incremental improvements and non-urgent bug fixes to the Renesas SoC drivers. - Implement irq_set_wake on the AMD pin controller so we can wake up from external pin events. Misc: - Devicetree bindings for the Apple M1 pin controller, we will probably see a proper driver for this soon as well. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmDeTu0ACgkQQRCzN7AZ XXO2Yg/+LHbqYX8V+Ig1ZcY4p5bfbGyyC6QG6g3d/kzzCmsjHFgmDFQoZ+LoRx+p FRUSvmiR0VERMZCEepHsZgzns6ezzJfBt4Cu/388d4iYZppaETpQV47TzqY3eP7Q 4Shu2wIKwd7C3vNrCifub0JOYAAEsqdlHd75g0bqhal9hgH/MgYQSq9F22/TKAFl hteFwyw5L4OwKIDUpqDOIcG8thhHYWrQy77/Pp82/TVnmO9gamt863dKBjIg6iF9 c+pmIWI8K2mBhNO+epGG4VSroUudIBwKV88nwUjKSe+pu0VAU7lit/V0Uh1IhG0s FUHHGDeF62Ncn4SOYetlnSlKbQkhJaBDV2sDgQ3xzqvs1P3WEHRWqYIh1egq5iW6 /KtpSlRLQ/aO+k0iN66pErpAfsGNFAxkqlCSypyJG7ROnb2rADzZ0ftEKQb8RzZb nypPupOO5/bFfQHbQtFORDaNu9MUTR5PR04eTPMoApG0nv7zY+kcJ6iJuKE9spLb ahoxLstfQ/fKK27yms72E6PqwanuUEzcQv7gjhuHmFEjNrW1ARUqoa5hpdAzhZOX 20P8SZWkSeUZnqB26YQq+1U9p6wV0064Vp+jYY/wzQpV40dgX9oumiRkxCWCzpjt 6mw6x9txlrEEu+2WadW8yZd4ewKvWFLEGI+C/83pnI5NF1Dp0Go= =Ajcr -----END PGP SIGNATURE----- Merge tag 'pinctrl-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.14 kernel. Not so much going on. No core changes, just drivers. The most interesting would be that MIPS Ralink is migrating to pin control and we have some bindings but not yet code for the Apple M1 pin controller. New drivers: - Last merge window we created a driver for the Ralink RT2880. We are now moving the Ralink SoC pin control drivers out of the MIPS architecture code and into the pin control subsystem. This concerns RT288X, MT7620, RT305X, RT3883 and MT7621. - Qualcomm SM6125 SoC pin control driver. - Qualcomm spmi-gpio support for PM7325. - Qualcomm spmi-mpp also handles PMI8994 (just a compatible string) - Mediatek MT8365 SoC pin controller. - New device HID for the AMD GPIO controller. Improvements: - Pin bias config support for a slew of Renesas pin controllers. - Incremental improvements and non-urgent bug fixes to the Renesas SoC drivers. - Implement irq_set_wake on the AMD pin controller so we can wake up from external pin events. Misc: - Devicetree bindings for the Apple M1 pin controller, we will probably see a proper driver for this soon as well" * tag 'pinctrl-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (54 commits) pinctrl: ralink: rt305x: add missing include pinctrl: stm32: check for IRQ MUX validity during alloc() pinctrl: zynqmp: some code cleanups drivers: qcom: pinctrl: Add pinctrl driver for sm6125 dt-bindings: pinctrl: qcom: sm6125: Document SM6125 pinctrl driver dt-bindings: pinctrl: mcp23s08: add documentation for reset-gpios pinctrl: mcp23s08: Add optional reset GPIO pinctrl: mediatek: fix mode encoding pinctrl: mcp23s08: Fix missing unlock on error in mcp23s08_irq() pinctrl: bcm: Constify static pinmux_ops pinctrl: bcm: Constify static pinctrl_ops pinctrl: ralink: move RT288X SoC pinmux config into a new 'pinctrl-rt288x.c' file pinctrl: ralink: move MT7620 SoC pinmux config into a new 'pinctrl-mt7620.c' file pinctrl: ralink: move RT305X SoC pinmux config into a new 'pinctrl-rt305x.c' file pinctrl: ralink: move RT3883 SoC pinmux config into a new 'pinctrl-rt3883.c' file pinctrl: ralink: move MT7621 SoC pinmux config into a new 'pinctrl-mt7621.c' file pinctrl: ralink: move ralink architecture pinmux header into the driver pinctrl: single: config: enable the pin's input pinctrl: mtk: Fix mt8365 Kconfig dependency pinctrl: mcp23s08: fix race condition in irq handler ... |
||
Linus Torvalds
|
e04360a2ea |
RDMA v5.14 merge window Pull Request
This PR contains a replacement driver for Intel iWarp hardware. This new driver supports the old ethernet hardware and also newer chips that can do ROCE. Otherwise this contains the typical mix of patches: - Driver updates and cleanups for bnxt_re, cxgb4, mlx4, and mlx5 - Many static checker driven code clean ups, including a wide refcount_t conversion - Several series for the hns driver, more HIP09 HW capabilities, migration to new HW register manipulators, and code cleanups - Minor fixes and improvements in srp, rts, and cm - Improvements throughout for sysfs related code to use DEVICE_ATTR_*, make the ib_port sysfs first-class, and overall use sysfs APIs properly - Intel's new irdma driver replacing i40iw - rxe general clean ups and Memory Window support -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAmDcunQACgkQOG33FX4g mxqSBA//dsZi/UzpzgU+YqyMFmUp04wd2/iCYzOcCViNPQZCyCARbGaMXI4kMa4s 8dM5xU76OnCuNSnXHaIwvHC3CdN9GUm08j9eWY7syvAiKtXCjzv7qmCVfBw35UyK IXKfXh57toTSSAIfxw8yKc97QgaDSJ2zQ34fXkoE0AvTlfyN6pHQe9ef/Ca0ejS4 awUGYVG/oilLXrEHcSSAv5UoX6hOUje6jqqRgp5jmZTI3g7SlIPL8mWgXBkHAYmd kDX7lBd09CKo2bmR071/kF6xUzvbCg1tmeE6lZze7gE+aKlBkZcvCBe1RAh3sBzK ysLfON5GGw5qnkMaY8j5h3sgWvi3qTTEW+jCAmmVi/6z4PF47mvmVVn+/pZc3y2e PqH43cunhwS0KuoUJ5Sd48J/UvabrvdbCNZrjCGCpt45EF4VwKxYMh74Bf0ABEQS i9eKR/+wyHG6Uv1U37fIXsqa8yUttl9aV/s88s8irn4xhG8ygBLZgeVQNeGUfvdV 1W0XLEjRmKFezC1FhiPOz7CLIgL3BfSU1V+S7p0Gvb6ijZqyZTfRUaWbaD3KJpRT 1kwzE4qp6IbJMEqgQH/lq0xBzvzF48FPvBslX5kwlm0phQRrMCwMVIafutpu395q ySeStEvsTVfz/JUHL3ZaEJyTRjAvPL0lXLH80XUpgWk9GzsksOM= =wyqt -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull rdma updates from Jason Gunthorpe: "This contains a replacement driver for Intel iWarp hardware. This new driver supports the old ethernet hardware and also newer chips that can do ROCE. Other than that, this contains the typical mix of patches: - Driver updates and cleanups for bnxt_re, cxgb4, mlx4, and mlx5 - Many static checker driven code clean ups, including a wide refcount_t conversion - Several series for the hns driver, more HIP09 HW capabilities, migration to new HW register manipulators, and code cleanups - Minor fixes and improvements in srp, rts, and cm - Improvements throughout for sysfs related code to use DEVICE_ATTR_*, make the ib_port sysfs first-class, and overall use sysfs APIs properly - Intel's new irdma driver replacing i40iw - rxe general clean ups and Memory Window support" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (211 commits) RDMA/core: Always release restrack object RDMA/mlx5: Don't access NULL-cleared mpi pointer RDMA/irdma: Fix potential overflow expression in irdma_prm_get_pbles RDMA/irdma: Check contents of user-space irdma_mem_reg_req object RDMA/rxe: Missing unlock on error in get_srq_wqe() RDMA/cma: Fix rdma_resolve_route() memory leak RDMA/core/sa_query: Remove unused argument RDMA/cma: Fix incorrect Packet Lifetime calculation RDMA/cma: Protect RMW with qp_mutex RDMA/cma: Remove unnecessary INIT->INIT transition RDMA/hns: Add window selection field of congestion control RDMA/hfi1: Remove use of kmap() RDMA/irdma: Remove use of kmap() RDMA/bnxt_re: Fix uninitialized struct bit field rsvd1 IB/isert: Align target max I/O size to initiator size RDMA/hns: Fix incorrect vlan enable bit in QPC MAINTAINERS: Update Broadcom RDMA maintainers RDMA/irdma: Use the queried port attributes RDMA/rxe: Fix redundant skb_put_zero RDMA/rxe: Fix extra copy in prepare_ack_packet ... |
||
Linus Torvalds
|
514798d365 |
This round has a diffstat dominated by Qualcomm clk drivers. Honestly though
that's just a bunch of data so the diffstat reflects that. Looking beyond that there's just a bunch of updates all around in various clk drivers. Renesas and NXP (for i.MX) are two SoC vendors that have a lot of patches in here. Overall the driver changes look to be mostly enabling more clks and non-critical fixes that we could hold until the next merge window. I'm especially excited about the series from Arnd that graduates clkdev to be the only implementation of clk_get() and clk_put(). That's a good step in the right direction to migreate eveerything over to the common clk framework. Now we don't have to worry about clkdev specific details, they're just part of the clk API now. Core: - clkdev is now the only option, i.e. clk_get()/clk_put() is implemented in only one place in the kernel instead of in drivers/clk/clkdev.c and in architectures that want their own implementation New Drivers: - Texas Instruments' LMK04832 Ultra Low-Noise JESD204B Compliant Clock Jitter Cleaner With Dual Loop PLLs - Qualcomm MDM9607 GCC - Qualcomm SC8180X display clks - Qualcomm SM6125 GCC - Qualcomm SM8250 CAMCC (camera) - Renesas RZ/G2L SoC - Hisilicon hi3559A SoC Updates: - Stop using clock-output-names in ST clk drivers (yay!) - Support secure mode of STM32MP1 SoCs - Improve clock support for Actions S500 SoC - duty cycle setting support on qcom clks - Add TI am33xx spread spectrum clock support - Use determine_rate() for the Amlogic pll ops instead of round_rate() - Restrict Amlogic gp0/1 and audio plls range on g12a/sm1 - Improve Amlogic axg-audio controller error on deferral - Add NNA clocks on Amlogic g12a - Reduce memory footprint of Rockchip PLL rate tables - A fix for the newly added Rockchip rk3568 clk driver - Exported clock for the newly added Rockchip video decoder - Remove audio ipg clock from i.MX8MP - Remove deprecated legacy clock binding for i.MX SCU clock driver - Use common clk-imx8qxp for both i.MX8QXP and i.MX8QM - Add multiple clocks to clk-imx8qxp driver (enet, hdmi, lcdif, audio, parallel interface) - Add dedicated clock ops for i.MX paralel interface - Different fixes for clocks controlled by ATF on i.MX SoCs - Add A53/A72 frequency scaling support i.MX clk-scu driver - Add special case for DCSS clock on suspend for i.MX clk-scu driver - Add parent save/restore on suspend/resume to i.MX clk-scu driver - Skip runtime PM enablement for CPU clocks in i.MX clk-scu driver - Remove the sys1_pll/sys2_pll clock gates for i.MX8MQ and their bindings - Tegra clk driver no longer deasserts resets on clk_enable as it gets in the way of certain power-up sequences - Fix compile testing for Tegra clk driver - One patch to fix a divider on the Allwinner v3s Audio PLL - Add support for CPU core clock boost modes on Renesas R-Car Gen3 - Add ISPCS (Image Signal Processor) clocks on Renesas R-Car V3U - Switch SH/R-Mobile and R-Car "DIV6" clocks to .determine_rate() and improve support for multiple parents - Switch Renesas RZ/N1 divider clocks to .determine_rate() - Add ZA2 (Audio Clock Generator) clock on Renesas R-Car D3 - Convert ar7 to common clk framework - Convert ralink to common clk framework -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmDbu3sRHHNib3lkQGtl cm5lbC5vcmcACgkQrQKIl8bklSV+OA/9EEV3uuauFsxVm8ySX4T8amHAzE98asEX XldxMqBuGNnlqJn3A3LeGISKKafaRMkL/7xqBnTi9ZycDy1WRi2SiAKLTDoJCmi7 ES32EBCO1O9D5uo4mYFsYgHUaxFmE+4tQbtDCttVt59yZEiiNPz0Lm8tWz5yuDzX IwCN8HrNShyL4dykTRUDuUkqrTg9sSqSvdG+XcyI24pgLtBWvJU32wIFfLN+/n9C JSyYwzHkajoeuv5kpAJ1IV/tzZgy77xQHunsatJWz1qJ1J2eFADWI2p3NVf88N21 5Mw5xvikMJZ5Xq8pdZKiyEQOFfcxN/+k7hfc6eq3SDpbkaHPti9CX2rv9Uck6rdh Bigixsx9IHbQ+1CJAXZxcAJma/GwzoWW1irqzTQoChYgwlJIyPijFqbuJxqS4P0d 9sEp0WvbdAEgnktiqs7gphki7Q04y2gUD3LKD6hz5sL0vZ+Dy1DY6olkWJefGrHo FDnEGf6gsP3vvvlJt5G2zeZQ/NzMKkfaIGLj/1hTtoLMaxpg282cmPXVUxD+ripW /GG/z14RdaHQXeMXduo+MeK5qUsO6LspnYown54IWilOOo1m/rfbun3yAFJaphG1 ZQB+JDfeH8Cv6AYbNwbEpXyXyj2Rz5fGQjA31+97fCCxykZ+suBQkWqK/lUCmTyf ofwokRnKiYY= =YnCF -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This round has a diffstat dominated by Qualcomm clk drivers. Honestly though that's just a bunch of data so the diffstat reflects that. Looking beyond that there's just a bunch of updates all around in various clk drivers. Renesas and NXP (for i.MX) are two SoC vendors that have a lot of patches in here. Overall the driver changes look to be mostly enabling more clks and non-critical fixes that we could hold until the next merge window. I'm especially excited about the series from Arnd that graduates clkdev to be the only implementation of clk_get() and clk_put(). That's a good step in the right direction to migreate eveerything over to the common clk framework. Now we don't have to worry about clkdev specific details, they're just part of the clk API now. Core: - clkdev is now the only option, i.e. clk_get()/clk_put() is implemented in only one place in the kernel instead of in drivers/clk/clkdev.c and in architectures that want their own implementation New Drivers: - Texas Instruments' LMK04832 Ultra Low-Noise JESD204B Compliant Clock Jitter Cleaner With Dual Loop PLLs - Qualcomm MDM9607 GCC - Qualcomm SC8180X display clks - Qualcomm SM6125 GCC - Qualcomm SM8250 CAMCC (camera) - Renesas RZ/G2L SoC - Hisilicon hi3559A SoC Updates: - Stop using clock-output-names in ST clk drivers (yay!) - Support secure mode of STM32MP1 SoCs - Improve clock support for Actions S500 SoC - duty cycle setting support on qcom clks - Add TI am33xx spread spectrum clock support - Use determine_rate() for the Amlogic pll ops instead of round_rate() - Restrict Amlogic gp0/1 and audio plls range on g12a/sm1 - Improve Amlogic axg-audio controller error on deferral - Add NNA clocks on Amlogic g12a - Reduce memory footprint of Rockchip PLL rate tables - A fix for the newly added Rockchip rk3568 clk driver - Exported clock for the newly added Rockchip video decoder - Remove audio ipg clock from i.MX8MP - Remove deprecated legacy clock binding for i.MX SCU clock driver - Use common clk-imx8qxp for both i.MX8QXP and i.MX8QM - Add multiple clocks to clk-imx8qxp driver (enet, hdmi, lcdif, audio, parallel interface) - Add dedicated clock ops for i.MX paralel interface - Different fixes for clocks controlled by ATF on i.MX SoCs - Add A53/A72 frequency scaling support i.MX clk-scu driver - Add special case for DCSS clock on suspend for i.MX clk-scu driver - Add parent save/restore on suspend/resume to i.MX clk-scu driver - Skip runtime PM enablement for CPU clocks in i.MX clk-scu driver - Remove the sys1_pll/sys2_pll clock gates for i.MX8MQ and their bindings - Tegra clk driver no longer deasserts resets on clk_enable as it gets in the way of certain power-up sequences - Fix compile testing for Tegra clk driver - One patch to fix a divider on the Allwinner v3s Audio PLL - Add support for CPU core clock boost modes on Renesas R-Car Gen3 - Add ISPCS (Image Signal Processor) clocks on Renesas R-Car V3U - Switch SH/R-Mobile and R-Car "DIV6" clocks to .determine_rate() and improve support for multiple parents - Switch Renesas RZ/N1 divider clocks to .determine_rate() - Add ZA2 (Audio Clock Generator) clock on Renesas R-Car D3 - Convert ar7 to common clk framework - Convert ralink to common clk framework" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (161 commits) clk: zynqmp: Handle divider specific read only flag clk: zynqmp: Use firmware specific mux clock flags clk: zynqmp: Use firmware specific divider clock flags clk: zynqmp: Use firmware specific common clock flags clk: lmk04832: Use of match table clk: lmk04832: Depend on SPI clk: stm32mp1: new compatible for secure RCC support dt-bindings: clock: stm32mp1 new compatible for secure rcc dt-bindings: reset: add MCU HOLD BOOT ID for SCMI reset domains on stm32mp15 dt-bindings: reset: add IDs for SCMI reset domains on stm32mp15 dt-bindings: clock: add IDs for SCMI clocks on stm32mp15 reset: stm32mp1: remove stm32mp1 reset clk: hisilicon: Add clock driver for hi3559A SoC dt-bindings: Document the hi3559a clock bindings clk: si5341: Add sysfs properties to allow checking/resetting device faults clk: si5341: Add silabs,iovdd-33 property clk: si5341: Add silabs,xaxb-ext-clk property clk: si5341: Allow different output VDD_SEL values clk: si5341: Update initialization magic clk: si5341: Check for input clock presence and PLL lock on startup ... |
||
Linus Torvalds
|
e058a84bfd |
drm pull for 5.14-rc1
core: - mark AGP ioctls as legacy - disable force probing for non-master clients - HDR metadata property helpers - HDMI infoframe signal colorimetry support - remove drm_device.pdev pointer - remove DRM_KMS_FB_HELPER config option - remove drm_pci_alloc/free - drm_err_*/drm_dbg_* helpers - use drm driver names for fbdev - leaked DMA handle fix - 16bpc fixed point format fourcc - add prefetching memcpy for WC - Documentation fixes aperture: - add aperture ownership helpers dp: - aux fixes - downstream 0 port handling - use extended base receiver capability DPCD - Rename DP_PSR_SELECTIVE_UPDATE to better mach eDP spec - mst: use khz as link rate during init - VCPI fixes for StarTech hub ttm: - provide tt_shrink file via debugfs - warn about freeing pinned BOs - fix swapping error handling - move page alignment into BO - cleanup ttm_agp_backend - add ttm_sys_manager - don't override vm_ops - ttm_bo_mmap removed - make ttm_resource base of all managers - remove VM_MIXEDMAP usage panel: - sysfs_emit support - simple: runtime PM support - simple: power up panel when reading EDID + caching bridge: - MHDP8546: HDCP support + DT bindings - MHDP8546: Register DP AUX channel with userspace - TI SN65DSI83 + SN65DSI84: add driver - Sil8620: Fix module dependencies - dw-hdmi: make CEC driver loading optional - Ti-sn65dsi86: refclk fixes, subdrivers, runtime pm - It66121: Add driver + DT bindings - Adv7511: Support I2S IEC958 encoding - Anx7625: fix power-on delay - Nwi-dsi: Modesetting fixes; Cleanups - lt6911: add missing MODULE_DEVICE_TABLE - cdns: fix PM reference leak hyperv: - add new DRM driver for HyperV graphics efifb: - non-PCI device handling fixes i915: - refactor IP/device versioning - XeLPD Display IP preperation work - ADL-P enablement patches - DG1 uAPI behind BROKEN - disable mmap ioctl for discerte GPUs - start enabling HuC loading for Gen12+ - major GuC backend rework for new platforms - initial TTM support for Discrete GPUs - locking rework for TTM prep - use correct max source link rate for eDP - %p4cc format printing - GLK display fixes - VLV DSI panel power fixes - PSR2 disabled for RKL and ADL-S - ACPI _DSM invalid access fixed - DMC FW path abstraction - ADL-S PCI ID update - uAPI headers converted to kerneldoc - initial LMEM support for DG1 - x86/gpu: add Jasperlake to gen11 early quirks amdgpu: - Aldebaran updates + initial SR-IOV - new GPU: Beige Goby and Yellow Carp support - more LTTPR display work - Vangogh updates - SDMA 5.x GCR fixes - PCIe ASPM support - Renoir TMZ enablement - initial multiple eDP panel support - use fdinfo to track devices/process info - pin/unpin TTM fixes - free resource on fence usage query - fix fence calculation - fix hotunplug/suspend issues - GC/MM register access macro cleanup for SR-IOV - W=1 fixes - ACPI ATCS/ATIF handling rework - 16bpc fixed point format support - Initial smartshift support - RV/PCO power tuning fixes - new INFO query for additional vbios info amdkfd: - SR-IOV aldebaran support - HMM SVM support radeon: - SMU regression fixes - Oland flickering fix vmwgfx: - enable console with fbdev emulation - fix cpu updates of coherent multisample surfaces - remove reservation semaphore - add initial SVGA3 support - support arm64 msm: - devcoredump support for display errors - dpu/dsi: yaml bindings conversion - mdp5: alpha/blend_mode/zpos support - a6xx: cached coherent buffer support - gpu iova fault improvement - a660 support rockchip: - RK3036 win1 scaling support - RK3066/3188 missing register support - RK3036/3066/3126/3188 alpha support mediatek: - MT8167 HDMI support - MT8183 DPI dual edge support tegra: - fixed YUV support/scaling on Tegra186+ ast: - use pcim_iomap - fix DP501 EDID bochs: - screen blanking support etnaviv: - export more GPU ID values to userspace - add HWDB entry for GPU on i.MX8MP - rework linear window calcs exynos: - pm runtime changes imx: - Annotate dma_fence critical section - fix PRG modifiers after drmm conversion - Add 8 pixel alignment fix for 1366x768 - fix YUV advertising - add color properties ingenic: - IPU planes fix panfrost: - Mediatek MT8183 support + DT bindings - export AFBC_FEATURES register to userspace simpledrm: - %pr for printing resources nouveau: - pin/unpin TTM fixes qxl: - unpin shadow BO virtio: - create dumb BOs as guest blob vkms: - drmm_universal_plane_alloc - add XRGB plane composition - overlay support -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmDdQzkACgkQDHTzWXnE hr7bhQ//aSYnp1To3tvPtwQ2H88RTnEbUd+nCi3C03QdLAbHC9dYHVdWuNPw2doh aiJO2JyQoqXVo95Jc39qkmpvm1lLDNQuufBweCHxbbpl8wYIUjfkIYq+fnZbWPaA aRVSOLE/4DIcgJTimsgOssAOK9klk/WYT9EV7CNIBA/b0R6f9iTUoBxCALDvMeVx Pt3Rnfsg3+u8msqBkkpkvFLZRS8lkXx6eZ0LEhUfRsfMcKo5L80cOHgvIhrh9+fN yBFv+u7jM3fOxyUYEoBeVY8UqTLfbgM+vdiP9pmiGn66yCZVJWIxCe1Mijk6K143 f4OxJy1jJAGzo/knLCuCb21qbzyImQzkold9V+h8KAvTXGeMPISjbpLbwGeo8rne lfTAisGnu8q3xvYAU9znx9DkFQULgUuWahEYY3jX0ApVCR76hiT6H7AR9EOMhvKY PD1n39Bf62p7zK5QQ+XUOiX3PGv8J6Hw/wykFy+AIg4YgT/oK+QJul820MjZiYyt 7Kt09Ibj4JO+vubxqlbJVsW3xtdg/Oz3BRMIdHs+2l/s0pSwBZa+qTcXhPGZxB5B HiyHiUgLsK8MQ0aIw9IK8+nJH8M60t6A179BbmVWxhYpGLH2Wvq0Vxgsedt9trHn 2RN3mHlpXHSaZJbIbPcvuOewBLKA6K94o2ZZ8xqZbDcCjjC60ts= =fFet -----END PGP SIGNATURE----- Merge tag 'drm-next-2021-07-01' of git://anongit.freedesktop.org/drm/drm Pull drm updates from Dave Airlie: "Highlights: - AMD enables two more GPUs, with resulting header files - i915 has started to move to TTM for discrete GPU and enable DG1 discrete GPU support (not by default yet) - new HyperV drm driver - vmwgfx adds arm64 support - TTM refactoring ongoing - 16bpc display support for AMD hw Otherwise it's just the usual insane amounts of work all over the place in lots of drivers and the core, as mostly summarised below: Core: - mark AGP ioctls as legacy - disable force probing for non-master clients - HDR metadata property helpers - HDMI infoframe signal colorimetry support - remove drm_device.pdev pointer - remove DRM_KMS_FB_HELPER config option - remove drm_pci_alloc/free - drm_err_*/drm_dbg_* helpers - use drm driver names for fbdev - leaked DMA handle fix - 16bpc fixed point format fourcc - add prefetching memcpy for WC - Documentation fixes aperture: - add aperture ownership helpers dp: - aux fixes - downstream 0 port handling - use extended base receiver capability DPCD - Rename DP_PSR_SELECTIVE_UPDATE to better mach eDP spec - mst: use khz as link rate during init - VCPI fixes for StarTech hub ttm: - provide tt_shrink file via debugfs - warn about freeing pinned BOs - fix swapping error handling - move page alignment into BO - cleanup ttm_agp_backend - add ttm_sys_manager - don't override vm_ops - ttm_bo_mmap removed - make ttm_resource base of all managers - remove VM_MIXEDMAP usage panel: - sysfs_emit support - simple: runtime PM support - simple: power up panel when reading EDID + caching bridge: - MHDP8546: HDCP support + DT bindings - MHDP8546: Register DP AUX channel with userspace - TI SN65DSI83 + SN65DSI84: add driver - Sil8620: Fix module dependencies - dw-hdmi: make CEC driver loading optional - Ti-sn65dsi86: refclk fixes, subdrivers, runtime pm - It66121: Add driver + DT bindings - Adv7511: Support I2S IEC958 encoding - Anx7625: fix power-on delay - Nwi-dsi: Modesetting fixes; Cleanups - lt6911: add missing MODULE_DEVICE_TABLE - cdns: fix PM reference leak hyperv: - add new DRM driver for HyperV graphics efifb: - non-PCI device handling fixes i915: - refactor IP/device versioning - XeLPD Display IP preperation work - ADL-P enablement patches - DG1 uAPI behind BROKEN - disable mmap ioctl for discerte GPUs - start enabling HuC loading for Gen12+ - major GuC backend rework for new platforms - initial TTM support for Discrete GPUs - locking rework for TTM prep - use correct max source link rate for eDP - %p4cc format printing - GLK display fixes - VLV DSI panel power fixes - PSR2 disabled for RKL and ADL-S - ACPI _DSM invalid access fixed - DMC FW path abstraction - ADL-S PCI ID update - uAPI headers converted to kerneldoc - initial LMEM support for DG1 - x86/gpu: add Jasperlake to gen11 early quirks amdgpu: - Aldebaran updates + initial SR-IOV - new GPU: Beige Goby and Yellow Carp support - more LTTPR display work - Vangogh updates - SDMA 5.x GCR fixes - PCIe ASPM support - Renoir TMZ enablement - initial multiple eDP panel support - use fdinfo to track devices/process info - pin/unpin TTM fixes - free resource on fence usage query - fix fence calculation - fix hotunplug/suspend issues - GC/MM register access macro cleanup for SR-IOV - W=1 fixes - ACPI ATCS/ATIF handling rework - 16bpc fixed point format support - Initial smartshift support - RV/PCO power tuning fixes - new INFO query for additional vbios info amdkfd: - SR-IOV aldebaran support - HMM SVM support radeon: - SMU regression fixes - Oland flickering fix vmwgfx: - enable console with fbdev emulation - fix cpu updates of coherent multisample surfaces - remove reservation semaphore - add initial SVGA3 support - support arm64 msm: - devcoredump support for display errors - dpu/dsi: yaml bindings conversion - mdp5: alpha/blend_mode/zpos support - a6xx: cached coherent buffer support - gpu iova fault improvement - a660 support rockchip: - RK3036 win1 scaling support - RK3066/3188 missing register support - RK3036/3066/3126/3188 alpha support mediatek: - MT8167 HDMI support - MT8183 DPI dual edge support tegra: - fixed YUV support/scaling on Tegra186+ ast: - use pcim_iomap - fix DP501 EDID bochs: - screen blanking support etnaviv: - export more GPU ID values to userspace - add HWDB entry for GPU on i.MX8MP - rework linear window calcs exynos: - pm runtime changes imx: - Annotate dma_fence critical section - fix PRG modifiers after drmm conversion - Add 8 pixel alignment fix for 1366x768 - fix YUV advertising - add color properties ingenic: - IPU planes fix panfrost: - Mediatek MT8183 support + DT bindings - export AFBC_FEATURES register to userspace simpledrm: - %pr for printing resources nouveau: - pin/unpin TTM fixes qxl: - unpin shadow BO virtio: - create dumb BOs as guest blob vkms: - drmm_universal_plane_alloc - add XRGB plane composition - overlay support" * tag 'drm-next-2021-07-01' of git://anongit.freedesktop.org/drm/drm: (1570 commits) drm/i915: Reinstate the mmap ioctl for some platforms drm/i915/dsc: abstract helpers to get bigjoiner primary/secondary crtc Revert "drm/msm/mdp5: provide dynamic bandwidth management" drm/msm/mdp5: provide dynamic bandwidth management drm/msm/mdp5: add perf blocks for holding fudge factors drm/msm/mdp5: switch to standard zpos property drm/msm/mdp5: add support for alpha/blend_mode properties drm/msm/mdp5: use drm_plane_state for pixel blend mode drm/msm/mdp5: use drm_plane_state for storing alpha value drm/msm/mdp5: use drm atomic helpers to handle base drm plane state drm/msm/dsi: do not enable PHYs when called for the slave DSI interface drm/msm: Add debugfs to trigger shrinker drm/msm/dpu: Avoid ABBA deadlock between IRQ modules drm/msm: devcoredump iommu fault support iommu/arm-smmu-qcom: Add stall support drm/msm: Improve the a6xx page fault handler iommu/arm-smmu-qcom: Add an adreno-smmu-priv callback to get pagefault info iommu/arm-smmu: Add support for driver IOMMU fault handlers drm/msm: export hangcheck_period in debugfs drm/msm/a6xx: add support for Adreno 660 GPU ... |
||
Linus Torvalds
|
c288d9cd71 |
for-5.14/io_uring-2021-06-30
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmDc0SsQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpt6BD/9ZHzfDCPVfd0ivftRYOS2GECZetR79Ar8h RdMPi4iSw1+gFbqKVpD38tBvJsvKq0/jVPap056KaxbdsU+JCG1dYfllbsK4tpVO uqDHDIX3YODmkRkqc6IkPtdxvATS3JBGdP9GOSEobgygOPs9qBXXd4tdP+2Hyzna 0DUIGnuO3VTfBa03OiHoIeC9Zo3o9sCIYHY1RG+awL/+43WeMQ8ZFX4CfYhgWTTp HyzzHdu67xAoVgsIyg5dTuV+Vo3cEtHXg8IKbDXoDQ1SAyr96Uw5pJ7JEq80mqyZ sxth6PlS0Safh6xJ5w6ZLIAaPz1fkL+2q1CeQAhkeWLuk6FImt0ZoxElbSkW+pTv LqVcXl+F65QhNQZ195OgPI+RGTSA5VQlAW0QwGnmEeket7pzqkdcLPVy1CO8ANiT t5qn8ZZmNFLMhnWGU/3zNyHQLvwKslxucpvrkS9Ol/6Yh9yKVEsAXC7yrk3F3dAF i4RAExbbUzUJKvRkm3kXpwUg2BGtJD7Achw9HD+prFKdt08XDLvffC8GnCqWd/4a zL9oSHR2OLV7RAQpDQ5cC7ZjWV20xsd2NM+pHk5rzbb9udQZWrJ2K218sqKkgFme MJzYIt/a79KvBh9+TvJBhx1adnmE4gBH4X23ZMN1hMXzoyVY5mELHbe5LwBSkibx A1DxPKv4vg== =FEZd -----END PGP SIGNATURE----- Merge tag 'for-5.14/io_uring-2021-06-30' of git://git.kernel.dk/linux-block Pull io_uring updates from Jens Axboe: - Multi-queue iopoll improvement (Fam) - Allow configurable io-wq CPU masks (me) - renameat/linkat tightening (me) - poll re-arm improvement (Olivier) - SQPOLL race fix (Olivier) - Cancelation unification (Pavel) - SQPOLL cleanups (Pavel) - Enable file backed buffers for shmem/memfd (Pavel) - A ton of cleanups and performance improvements (Pavel) - Followup and misc fixes (Colin, Fam, Hao, Olivier) * tag 'for-5.14/io_uring-2021-06-30' of git://git.kernel.dk/linux-block: (83 commits) io_uring: code clean for kiocb_done() io_uring: spin in iopoll() only when reqs are in a single queue io_uring: pre-initialise some of req fields io_uring: refactor io_submit_flush_completions io_uring: optimise hot path restricted checks io_uring: remove not needed PF_EXITING check io_uring: mainstream sqpoll task_work running io_uring: refactor io_arm_poll_handler() io_uring: reduce latency by reissueing the operation io_uring: add IOPOLL and reserved field checks to IORING_OP_UNLINKAT io_uring: add IOPOLL and reserved field checks to IORING_OP_RENAMEAT io_uring: refactor io_openat2() io_uring: simplify struct io_uring_sqe layout io_uring: update sqe layout build checks io_uring: fix code style problems io_uring: refactor io_sq_thread() io_uring: don't change sqpoll creds if not needed io_uring: Create define to modify a SQPOLL parameter io_uring: Fix race condition when sqp thread goes to sleep io_uring: improve in tctx_task_work() resubmission ... |
||
Riccardo Mancini
|
cf96b8e45a |
perf session: Add missing evlist__delete when deleting a session
ASan reports a memory leak caused by evlist not being deleted on exit in perf-report, perf-script and perf-data. The problem is caused by evlist->session not being deleted, which is allocated in perf_session__read_header, called in perf_session__new if perf_data is in read mode. In case of write mode, the session->evlist is filled by the caller. This patch solves the problem by calling evlist__delete in perf_session__delete if perf_data is in read mode. Changes in v2: - call evlist__delete from within perf_session__delete v1: https://lore.kernel.org/lkml/20210621234317.235545-1-rickyman7@gmail.com/ ASan report follows: $ ./perf script report flamegraph ================================================================= ==227640==ERROR: LeakSanitizer: detected memory leaks <SNIP unrelated> Indirect leak of 2704 byte(s) in 1 object(s) allocated from: #0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137) #1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9 #2 0x7f999e in evlist__new /home/user/linux/tools/perf/util/evlist.c:77:26 #3 0x8ad938 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3797:20 #4 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6 #5 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10 #6 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12 #7 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 #8 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 #9 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2 #10 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3 #11 0x7f5260654b74 (/lib64/libc.so.6+0x27b74) Indirect leak of 568 byte(s) in 1 object(s) allocated from: #0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137) #1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9 #2 0x80ce88 in evsel__new_idx /home/user/linux/tools/perf/util/evsel.c:268:24 #3 0x8aed93 in evsel__new /home/user/linux/tools/perf/util/evsel.h:210:9 #4 0x8ae07e in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3853:11 #5 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6 #6 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10 #7 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12 #8 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 #9 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 #10 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2 #11 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3 #12 0x7f5260654b74 (/lib64/libc.so.6+0x27b74) Indirect leak of 264 byte(s) in 1 object(s) allocated from: #0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137) #1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9 #2 0xbe3e70 in xyarray__new /home/user/linux/tools/lib/perf/xyarray.c:10:23 #3 0xbd7754 in perf_evsel__alloc_id /home/user/linux/tools/lib/perf/evsel.c:361:21 #4 0x8ae201 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3871:7 #5 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6 #6 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10 #7 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12 #8 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 #9 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 #10 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2 #11 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3 #12 0x7f5260654b74 (/lib64/libc.so.6+0x27b74) Indirect leak of 32 byte(s) in 1 object(s) allocated from: #0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137) #1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9 #2 0xbd77e0 in perf_evsel__alloc_id /home/user/linux/tools/lib/perf/evsel.c:365:14 #3 0x8ae201 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3871:7 #4 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6 #5 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10 #6 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12 #7 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 #8 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 #9 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2 #10 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3 #11 0x7f5260654b74 (/lib64/libc.so.6+0x27b74) Indirect leak of 7 byte(s) in 1 object(s) allocated from: #0 0x4b8207 in strdup (/home/user/linux/tools/perf/perf+0x4b8207) #1 0x8b4459 in evlist__set_event_name /home/user/linux/tools/perf/util/header.c:2292:16 #2 0x89d862 in process_event_desc /home/user/linux/tools/perf/util/header.c:2313:3 #3 0x8af319 in perf_file_section__process /home/user/linux/tools/perf/util/header.c:3651:9 #4 0x8aa6e9 in perf_header__process_sections /home/user/linux/tools/perf/util/header.c:3427:9 #5 0x8ae3e7 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3886:2 #6 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6 #7 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10 #8 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12 #9 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 #10 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 #11 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2 #12 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3 #13 0x7f5260654b74 (/lib64/libc.so.6+0x27b74) SUMMARY: AddressSanitizer: 3728 byte(s) leaked in 7 allocation(s). Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Acked-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210624231926.212208-1-rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Riccardo Mancini
|
6de249d66d |
perf annotate: Allow 's' on source code lines
In perf annotate, when 's' is pressed on a line containing source code, it shows the message "Only available for assembly lines". This patch gets rid of the error, moving the cursr to the next available asm line (or the closest previous one if no asm line is found moving forwards), before hiding source code lines. Changes in v2: - handle case of no asm line found in annotate_browser__find_next_asm_line by returning NULL and handling error in caller. Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin Liška <mliska@suse.cz> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210624223423.189550-1-rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Adrian Hunter
|
ec4c00fedb |
perf dlfilter: Add object_code() to perf_dlfilter_fns
Add a function, for use by dlfilters, to read object code. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20210627131818.810-11-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Adrian Hunter
|
6495e76252 |
perf dlfilter: Add attr() to perf_dlfilter_fns
Add a function, for use by dlfilters, to return the perf_event_attr structure. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20210627131818.810-10-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Adrian Hunter
|
244afc0c93 |
perf dlfilter: Add srcline() to perf_dlfilter_fns
Add a function, for use by dlfilters, to return source code file name and line number. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20210627131818.810-9-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Adrian Hunter
|
e35995effd |
perf dlfilter: Add insn() to perf_dlfilter_fns
Add a function, for use by dlfilters, to return instruction bytes. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20210627131818.810-8-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Adrian Hunter
|
f645744c50 |
perf dlfilter: Add resolve_address() to perf_dlfilter_fns
Add a function, for use by dlfilters, to resolve addresses from branch stacks or callchains. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20210627131818.810-7-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Adrian Hunter
|
0beb218315 |
perf build: Install perf_dlfilter.h
Users of the --dlfilter option need to include perf_dlfilter.h in their filters. Install it to the include path. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20210627131818.810-6-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Adrian Hunter
|
3d032a2516 |
perf script: Add option to pass arguments to dlfilters
Add option --dlarg to pass arguments to dlfilters. The --dlarg option can be repeated to pass more than 1 argument. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20210627131818.810-5-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Adrian Hunter
|
638e2b9984 |
perf script: Add option to list dlfilters
Add option --list-dlfilters to list dlfilters in the current directory or the exec-path e.g. ~/libexec/perf-core/dlfilters. Use with option -v (must come before option --list-dlfilters) to show long descriptions. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20210627131818.810-4-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Adrian Hunter
|
9bde93a79a |
perf script: Add dlfilter__filter_event_early()
filter_event_early() can be more than 30% faster than filter_event() because it is called before internal filtering. In other respects it is the same as filter_event(), except that it will be passed events that have yet to be filtered out. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20210627131818.810-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Adrian Hunter
|
291961fc3c |
perf script: Add API for filtering via dynamically loaded shared object
In some cases, users want to filter very large amounts of data (e.g. from AUX area tracing like Intel PT) looking for something specific. While scripting such as Python can be used, Python is 10 to 20 times slower than C. So define a C API so that custom filters can be written and loaded. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20210627131818.810-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
c435c166dc |
perf llvm: Return -ENOMEM when asprintf() fails
Zhihao sent a patch but it made llvm__compile_bpf() return what asprintf() returns on error, which is just -1, but since this function returns -errno, fix it by returning -ENOMEM for this case instead. Fixes: |
||
James Clark
|
0323dea318 |
perf cs-etm: Delay decode of non-timeless data until cs_etm__flush_events()
Currently, timeless mode starts the decode on PERF_RECORD_EXIT, and non-timeless mode starts decoding on the fist PERF_RECORD_AUX record. This can cause the "data has no samples!" error if the first PERF_RECORD_AUX record comes before the first (or any relevant) PERF_RECORD_MMAP2 record because the mmaps are required by the decoder to access the binary data. This change pushes the start of non-timeless decoding to the very end of parsing the file. The PERF_RECORD_EXIT event can't be used because it might not exist in system-wide or snapshot modes. I have not been able to find the exact cause for the events to be intermittently in the wrong order in the basic scenario: perf record -e cs_etm/@tmc_etr0/u top But it can be made to happen every time with the --delay option. This is because "enable_on_exec" is disabled, which causes tracing to start before the process to be launched is exec'd. For example: perf record -e cs_etm/@tmc_etr0/u --delay=1 top perf report -D | grep 'AUX\|MAP' 0 16714475632740 0x520 [0x40]: PERF_RECORD_AUX offset: 0 size: 0x30 flags: 0 [] 0 16714476494960 0x5d0 [0x40]: PERF_RECORD_AUX offset: 0x30 size: 0x30 flags: 0 [] 0 16714478208900 0x660 [0x40]: PERF_RECORD_AUX offset: 0x60 size: 0x30 flags: 0 [] 4294967295 16714478293340 0x700 [0x70]: PERF_RECORD_MMAP2 8712/8712: [0x557a460000(0x54000) @ 0 00:17 5329258 0]: r-xp /usr/bin/top 4294967295 16714478353020 0x770 [0x88]: PERF_RECORD_MMAP2 8712/8712: [0x7f86f72000(0x34000) @ 0 00:17 5214354 0]: r-xp /usr/lib/aarch64-linux-gnu/ld-2.31.so Another scenario in which decoding from the first aux record fails is a workload that forks. Although the aux record comes after 'bash', it comes before 'top', which is what we are interested in. For example: perf record -e cs_etm/@tmc_etr0/u -- bash -c top perf report -D | grep 'AUX\|MAP' 4294967295 16853946421300 0x510 [0x70]: PERF_RECORD_MMAP2 8723/8723: [0x558f280000(0x142000) @ 0 00:17 5213953 0]: r-xp /usr/bin/bash 4294967295 16853946543560 0x580 [0x88]: PERF_RECORD_MMAP2 8723/8723: [0x7fbba6e000(0x34000) @ 0 00:17 5214354 0]: r-xp /usr/lib/aarch64-linux-gnu/ld-2.31.so 4294967295 16853946628420 0x608 [0x68]: PERF_RECORD_MMAP2 8723/8723: [0x7fbba9e000(0x1000) @ 0 00:00 0 0]: r-xp [vdso] 0 16853947067300 0x690 [0x40]: PERF_RECORD_AUX offset: 0 size: 0x3a60 flags: 0 [] ... 0 16853966602580 0x1758 [0x40]: PERF_RECORD_AUX offset: 0xc2470 size: 0x30 flags: 0 [] 4294967295 16853967119860 0x1818 [0x70]: PERF_RECORD_MMAP2 8723/8723: [0x5559e70000(0x54000) @ 0 00:17 5329258 0]: r-xp /usr/bin/top 4294967295 16853967181620 0x1888 [0x88]: PERF_RECORD_MMAP2 8723/8723: [0x7f9ed06000(0x34000) @ 0 00:17 5214354 0]: r-xp /usr/lib/aarch64-linux-gnu/ld-2.31.so 4294967295 16853967237180 0x1910 [0x68]: PERF_RECORD_MMAP2 8723/8723: [0x7f9ed36000(0x1000) @ 0 00:00 0 0]: r-xp [vdso] A third scenario is when the majority of time is spent in a shared library that is not loaded at startup. For example a dynamically loaded plugin. Testing ======= Testing was done by checking if any samples that are present in the old output are missing from the new output. Timestamps must be stripped out with awk because now they are set to the last AUX sample, rather than the first: ./perf script $4 | awk '!($4="")' > new.script ./perf-default script $4 | awk '!($4="")' > default.script comm -13 <(sort -u new.script) <(sort -u default.script) Testing showed that the new output is a superset of the old. When lines appear in the comm output, it is not because they are missing but because [unknown] is now resolved to sensible locations. For example last putp branch here now resolves to libtinfo, so it's not missing from the output, but is actually improved: Old: top 305 [001] 1 branches:uH: 402830 _init+0x30 (/usr/bin/top.procps) => 404a1c [unknown] (/usr/bin/top.procps) top 305 [001] 1 branches:uH: 404a20 [unknown] (/usr/bin/top.procps) => 402970 putp@plt+0x0 (/usr/bin/top.procps) top 305 [001] 1 branches:uH: 40297c putp@plt+0xc (/usr/bin/top.procps) => 0 [unknown] ([unknown]) New: top 305 [001] 1 branches:uH: 402830 _init+0x30 (/usr/bin/top.procps) => 404a1c [unknown] (/usr/bin/top.procps) top 305 [001] 1 branches:uH: 404a20 [unknown] (/usr/bin/top.procps) => 402970 putp@plt+0x0 (/usr/bin/top.procps) top 305 [001] 1 branches:uH: 40297c putp@plt+0xc (/usr/bin/top.procps) => 7f8ab39208 putp+0x0 (/lib/libtinfo.so.5.9) In the following two modes, decoding now works and the "data has no samples!" error is not displayed any more: perf record -e cs_etm/@tmc_etr0/u -- bash -c top perf record -e cs_etm/@tmc_etr0/u --delay=1 top In snapshot mode, there is also an improvement to decoding. Previously samples for the 'kill' process that was used to send SIGUSR2 were completely missing, because the process hadn't started yet. But now there are additional samples present: perf record -e cs_etm/@tmc_etr0/u --snapshot -a perf script stress 19380 [003] 161627.938153: 1000000 instructions:uH: aaaabb612fb4 [unknown] (/usr/bin/stress) kill 19644 [000] 161627.938153: 1000000 instructions:uH: ffffae0ef210 [unknown] (/lib/aarch64-linux-gnu/ld-2.27.so) stress 19380 [003] 161627.938153: 1000000 instructions:uH: ffff9e754d40 random_r+0x20 (/lib/aarch64-linux-gnu/libc-2.27.so) Also tested was the round trip of 'perf inject' followed by 'perf report' which has the same differences and improvements. Signed-off-by: James Clark <james.clark@arm.com> Reviewed-by: Leo Yan <leo.yan@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Al Grant <al.grant@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Branislav Rankov <branislav.rankov@arm.com> Cc: Denis Nikitin <denik@chromium.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lore.kernel.org/lkml/20210609130421.13934-1-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
f88bb1cb3e |
tools headers UAPI: Synch KVM's svm.h header with the kernel
To pick up the changes from:
|
||
Arnaldo Carvalho de Melo
|
795c4ab87e |
tools kvm headers arm64: Update KVM headers from the kernel sources
To pick the changes from:
|
||
Arnaldo Carvalho de Melo
|
e48f62aece |
tools headers UAPI: Sync linux/kvm.h with the kernel sources
To pick the changes in: |
||
Arnaldo Carvalho de Melo
|
cc200a7de9 |
tools headers cpufeatures: Sync with the kernel sources
To pick the changes from: |
||
Arnaldo Carvalho de Melo
|
14c6ef2b55 |
tools include UAPI: Update linux/mount.h copy
To pick the changes from:
|
||
Arnaldo Carvalho de Melo
|
04df0dc118 |
tools arch x86: Sync the msr-index.h copy with the kernel sources
To pick up the changes from these csets:
|
||
Leo Yan
|
8941ba502f |
perf arm-spe: Don't wait for PERF_RECORD_EXIT event
When decode Arm SPE trace, it waits for PERF_RECORD_EXIT event (the last perf event) for processing trace data, which is needless and even might cause logic error, e.g. it might fail to correlate perf events with Arm SPE events correctly. So this patch removes the condition checking for PERF_RECORD_EXIT event. Signed-off-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: James Clark <james.clark@arm.com> Tested-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Al Grant <Al.Grant@arm.com> Cc: Dave Martin <Dave.Martin@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210519071939.1598923-6-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Leo Yan
|
afb5e9e47f |
perf arm-spe: Bail out if the trace is later than perf event
It's possible that record in Arm SPE trace is later than perf event and vice versa. This asks to correlate the perf events and Arm SPE synthesized events to be processed in the manner of correct timing. To achieve the time ordering, this patch reverses the flow, it firstly calls arm_spe_sample() and then calls arm_spe_decode(). By comparing the timestamp value and detect the perf event is coming earlier than Arm SPE trace data, it bails out from the decoding loop, the last record is pushed into auxtrace stack and is deferred to generate sample. To track the timestamp, everytime it updates timestamp for the latest record. Signed-off-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: James Clark <james.clark@arm.com> Tested-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Al Grant <Al.Grant@arm.com> Cc: Dave Martin <Dave.Martin@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20210519071939.1598923-5-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Leo Yan
|
85498f756f |
perf arm-spe: Assign kernel time to synthesized event
In current code, it assigns the arch timer counter to the synthesized samples Arm SPE trace, thus the samples don't contain the kernel time but only contain the raw counter value. To fix the issue, this patch converts the timer counter to kernel time and assigns it to sample timestamp. Signed-off-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: James Clark <james.clark@arm.com> Tested-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Al Grant <Al.Grant@arm.com> Cc: Dave Martin <Dave.Martin@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20210519071939.1598923-4-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Leo Yan
|
630519014c |
perf arm-spe: Convert event kernel time to counter value
When handle a perf event, Arm SPE decoder needs to decide if this perf event is earlier or later than the samples from Arm SPE trace data; to do comparision, it needs to use the same unit for the time. This patch converts the event kernel time to arch timer's counter value, thus it can be used to compare with counter value contained in Arm SPE Timestamp packet. Signed-off-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: James Clark <james.clark@arm.com> Tested-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Al Grant <Al.Grant@arm.com> Cc: Dave Martin <Dave.Martin@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20210519071939.1598923-3-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Leo Yan
|
c210c30696 |
perf arm-spe: Save clock parameters from TIME_CONV event
During the recording phase, "perf record" tool synthesizes event PERF_RECORD_TIME_CONV for the hardware clock parameters and saves the event into the data file. Afterwards, when processing the data file, the event TIME_CONV will be processed at the very early time and is stored into session context. This patch extracts these parameters from the session context and saves into the structure "spe->tc" with the type perf_tsc_conversion, so that the parameters are ready for conversion between clock counter and time stamp. Signed-off-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: James Clark <james.clark@arm.com> Tested-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Al Grant <Al.Grant@arm.com> Cc: Dave Martin <Dave.Martin@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20210519071939.1598923-2-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Leo Yan
|
2f01c200d4 |
perf cs-etm: Remove callback cs_etm_find_snapshot()
The callback cs_etm_find_snapshot() is invoked for snapshot mode, its main purpose is to find the correct AUX trace data and returns "head" and "old" (we can call "old" as "old head") to the caller, the caller __auxtrace_mmap__read() uses these two pointers to decide the AUX trace data size. This patch removes cs_etm_find_snapshot() with below reasons: - The first thing in cs_etm_find_snapshot() is to check if the head has wrapped around, if it is not, directly bails out. The checking is pointless, this is because the "head" and "old" pointers both are monotonical increasing so they never wrap around. - cs_etm_find_snapshot() adjusts the "head" and "old" pointers and assumes the AUX ring buffer is fully filled with the hardware trace data, so it always subtracts the difference "mm->len" from "head" to get "old". Let's imagine the snapshot is taken in very short interval, the tracers only fill a small chunk of the trace data into the AUX ring buffer, in this case, it's wrongly to copy the whole the AUX ring buffer to perf file. - As the "head" and "old" pointers are monotonically increased, the function __auxtrace_mmap__read() handles these two pointers properly. It calculates the reminders for these two pointers, and the size is clamped to be never more than "snapshot_size". We can simply reply on the function __auxtrace_mmap__read() to calculate the correct result for data copying, it's not necessary to add Arm CoreSight specific callback. Signed-off-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: James Clark <james.clark@arm.com> Tested-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Daniel Kiss <daniel.kiss@arm.com> Cc: Denis Nikitin <denik@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: coresight@lists.linaro.org Link: http://lore.kernel.org/lkml/20210701093537.90759-3-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Namhyung Kim
|
d6a735ef32 |
perf bpf_counter: Move common functions to bpf_counter.h
Some helper functions will be used for cgroup counting too. Move them to a header file for sharing. Committer notes: Fix the build on older systems with: - struct bpf_map_info map_info = {0}; + struct bpf_map_info map_info = { .id = 0, }; This wasn't breaking the build in such systems as bpf_counter.c isn't built due to: tools/perf/util/Build: perf-$(CONFIG_PERF_BPF_SKEL) += bpf_counter.o The bpf_counter.h file on the other hand is included from places that are built everywhere. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20210625071826.608504-4-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Linus Torvalds
|
911a2997a5 |
\n
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmDcl7AACgkQnJ2qBz9k QNnsBQf+LBAPsfykQ/f8EdHErO1lfbVTmwf2g/JzTkjrIVZTZ6Ic47aCIiFxgHU2 Js9ufaPxpsbbopzpn2PAoCUzxNsZDqgXtnC03MOUAqoSFbAvgLHz2sQwjqeYJUGQ P6n7VipEA/qBVpQI5zeCUhHYcahoNrRjSLzaFnE2Z8CrQYQ6Ry9gVEhduvu2OTru 62cWlAWlTJfx/FcR1Y0F/ZznnNSKMiAHcEe3F6Beztplg2ooq+z6FclJYrkmnxMq SXSOsqTCdi1/oFx36NpvLkykrIS9I7N/iqCnKwbm6X+nyZZKyAwYZhWVqkbozPPu +u1Ppq8o0IuWwEA6/UAmxgAO3m/Gkw== =tn0h -----END PGP SIGNATURE----- Merge tag 'fs_for_v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull misc fs updates from Jan Kara: "The new quotactl_fd() syscall (remake of quotactl_path() syscall that got introduced & disabled in 5.13 cycle), and couple of udf, reiserfs, isofs, and writeback fixes and cleanups" * tag 'fs_for_v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: writeback: fix obtain a reference to a freeing memcg css quota: remove unnecessary oom message isofs: remove redundant continue statement quota: Wire up quotactl_fd syscall quota: Change quotactl_path() systcall to an fd-based one reiserfs: Remove unneed check in reiserfs_write_full_page() udf: Fix NULL pointer dereference in udf_symlink function reiserfs: add check for invalid 1st journal block |
||
Manfred Spraul
|
b869d5be0a |
ipc/util.c: use binary search for max_idx
If semctl(), msgctl() and shmctl() are called with IPC_INFO, SEM_INFO, MSG_INFO or SHM_INFO, then the return value is the index of the highest used index in the kernel's internal array recording information about all SysV objects of the requested type for the current namespace. (This information can be used with repeated ..._STAT or ..._STAT_ANY operations to obtain information about all SysV objects on the system.) There is a cache for this value. But when the cache needs up be updated, then the highest used index is determined by looping over all possible values. With the introduction of IPCMNI_EXTEND_SHIFT, this could be a loop over 16 million entries. And due to /proc/sys/kernel/*next_id, the index values do not need to be consecutive. With <write 16000000 to msg_next_id>, msgget(), msgctl(,IPC_RMID) in a loop, I have observed a performance increase of around factor 13000. As there is no get_last() function for idr structures: Implement a "get_last()" using a binary search. As far as I see, ipc is the only user that needs get_last(), thus implement it in ipc/util.c and not in a central location. [akpm@linux-foundation.org: tweak comment, fix typo] Link: https://lkml.kernel.org/r/20210425075208.11777-2-manfred@colorfullife.com Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Acked-by: Davidlohr Bueso <dbueso@suse.de> Cc: <1vier1@web.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Manfred Spraul
|
17d056e0bd |
ipc/sem.c: use READ_ONCE()/WRITE_ONCE() for use_global_lock
The patch solves three weaknesses in ipc/sem.c: 1) The initial read of use_global_lock in sem_lock() is an intentional race. KCSAN detects these accesses and prints a warning. 2) The code assumes that plain C read/writes are not mangled by the CPU or the compiler. 3) The comment it sysvipc_sem_proc_show() was hard to understand: The rest of the comments in ipc/sem.c speaks about sem_perm.lock, and suddenly this function speaks about ipc_lock_object(). To solve 1) and 2), use READ_ONCE()/WRITE_ONCE(). Plain C reads are used in code that owns sma->sem_perm.lock. The comment is updated to solve 3) [manfred@colorfullife.com: use READ_ONCE()/WRITE_ONCE() for use_global_lock] Link: https://lkml.kernel.org/r/20210627161919.3196-3-manfred@colorfullife.com Link: https://lkml.kernel.org/r/20210514175319.12195-1-manfred@colorfullife.com Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Reviewed-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Davidlohr Bueso <dbueso@suse.de> Cc: <1vier1@web.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Vasily Averin
|
bc8136a543 |
ipc: use kmalloc for msg_queue and shmid_kernel
msg_queue and shmid_kernel are quite small objects, no need to use kvmalloc for them. mhocko@: "Both of them are 256B on most 64b systems." Previously these objects was allocated via ipc_alloc/ipc_rcu_alloc(), common function for several ipc objects. It had kvmalloc call inside(). Later, this function went away and was finally replaced by direct kvmalloc call, and now we can use more suitable kmalloc/kfree for them. Link: https://lkml.kernel.org/r/0d0b6c9b-8af3-29d8-34e2-a565c53780f3@virtuozzo.com Reported-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Roman Gushchin <guro@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |