Supported ECE options are returned from FW in the create_qp phase and zero
means that field is not valid. Such default value allows us to reuse
reserved field without worries about comp_mask.
Update create QP API to return ECE options.
Link: https://lore.kernel.org/r/20200526115440.205922-3-leon@kernel.org
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
IBTA declares "vendor option not supported" reject reason in REJ messages
if passive side doesn't want to accept proposed ECE options.
Due to the fact that ECE is managed by userspace, there is a need to let
users to provide such rejected reason.
Link: https://lore.kernel.org/r/20200526103304.196371-7-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The rdma_accept() is called by both passive and active sides of CMID
connection to mark readiness to start data transfer. For passive side,
this is called explicitly, for active side, it is called implicitly while
receiving REP message.
Provide ECE data to rdma_accept function needed for passive side to send
that REP message.
Link: https://lore.kernel.org/r/20200526103304.196371-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ECE parameters are exchanged through REQ->REP/SIDR_REP messages, this
patch adds the data to provide to other side of CMID communication
channel.
Link: https://lore.kernel.org/r/20200526103304.196371-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Passive side of CMID connection receives ECE request through REQ message
and needs to respond with relevant REP message which will be forwarded to
active side.
The UCMA events interface is responsible for such communication with the
user space (librdmacm). Extend it to provide ECE wire data.
Link: https://lore.kernel.org/r/20200526103304.196371-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Active side of CMID initiates connection through librdmacm's
rdma_connect() and kernel's ucma_connect(). Extend UCMA interface to
handle those new parameters.
Link: https://lore.kernel.org/r/20200526103304.196371-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
From the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Required for dependencies in following patches
* branch 'mellanox/mlx5-next':
net/mlx5: Add ability to read and write ECE options
net/mlx5: Add support for RDMA TX FT headers modifying
net/mlx5: Move iseg access helper routines close to mlx5_core driver
net/mlx5: Cleanup mlx5_ifc_fte_match_set_misc2_bits
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The commit citied in the Fixes line wasn't complete and solved
only part of the problems. Update the mlx5_ib to properly support
MLX5_CMD_OP_INIT2INIT_QP command in the DEVX, that is required when
modify the QP tx_port_affinity.
Fixes: 819f7427ba ("RDMA/mlx5: Add init2init as a modify command")
Link: https://lore.kernel.org/r/20200527135703.482501-1-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Make use of the sizeof_field() helper instead of an open-coded version.
Link: https://lore.kernel.org/r/20200527144152.GA22605@embeddedor
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
can_sleep is always 0 when iboib_mcast_alloc() is called, so remove it and
use GFP_ATOMIC instead of GFP_KERNEL.
Link: https://lore.kernel.org/r/20200525130305.171509-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove device specific debugfs entries immediately if LLD detaches a
particular ULD device in case of fatal PCI errors.
Link: https://lore.kernel.org/r/20200524190814.17599-1-bharat@chelsio.com
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In function pvrdma_pci_probe(), pdev was not disabled in one error
path. Thus replace the jump target “err_free_device” by
"err_disable_pdev".
Fixes: 29c8d9eba5 ("IB: Add vmw_pvrdma driver")
Link: https://lore.kernel.org/r/20200523030457.16160-1-wu000273@umn.edu
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Instead of i with the sge number of wr will make the comparision more
clear, that is, when the sge number in wr is small than the maximum
supported sge number in the queue, then a stop sge needed to be filled at
the end of sges in wr.
Link: https://lore.kernel.org/r/1590152579-32364-5-git-send-email-liweihang@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The redundant parameters "hr_dev" need to be removed from
free_kernel_wrid() and free_srq_wrid().
Link: https://lore.kernel.org/r/1590152579-32364-3-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no need to do a type cast on genernal pointers, they could be
assigned to any type of variables. In addition, optimize initialization of
some variables and adjust order of them.
Link: https://lore.kernel.org/r/1590152579-32364-2-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently, the MTR region is configed before hns_roce_mtr_map() is
invoked, but in some scenarios, the region is configed at MTR creation,
the caller need to store this config and call hns_roce_mtr_map() later. So
optimize the usage by wrapping the MTR region config into MTR.
Link: https://lore.kernel.org/r/1589982799-28728-10-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Split the code related to WQE buffer configure from the QPC filling
process into two functions: config_qp_sq_buf() and config_qp_rq_buf(),
this will make the code more readable.
Link: https://lore.kernel.org/r/1589982799-28728-9-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
It's easier to understand and maintain enable flags of cq using a single
field in type of u32 than defining a field for every flags in the
structure hns_roce_cq, and we can add new flags for features more
conveniently in the future.
Link: https://lore.kernel.org/r/1589982799-28728-3-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The hardware can truncate PI/CI when posting or polling, the driver does
not need to do truncation. Therefore keep the software's PI/CI consistent
with it in the hardware.
Link: https://lore.kernel.org/r/1589982799-28728-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The macros do_each_path/while_each_path lead to a smatch warning:
drivers/infiniband/ulp/rtrs/rtrs-clt.c:1196 rtrs_clt_failover_req() warn: inconsistent indenting
drivers/infiniband/ulp/rtrs/rtrs-clt.c:2890 rtrs_clt_request() warn: inconsistent indenting
Also checkpatch complains:
ERROR: Macros with multiple statements should be enclosed in a do - while loop
The macros are used only in two places: for a normal IO path and for the
failover path triggered after errors.
Get rid of the macros and just use a for loop iterating over the list of
paths in both places. It is easier to read and also less lines of code.
Fixes: 6a98d71dae ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20200522053924.528980-1-danil.kipnis@cloud.ionos.com
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The rtrs_sess structure has already been extracted above from the
rtrs_srv_sess structure. Use that to avoid redundant dereferencing.
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20200522082833.1480551-1-haris.phnx@gmail.com
Signed-off-by: Md Haris Iqbal <haris.phnx@gmail.com>
Acked-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The allocated ports structure in never freed. The free function should be
called by release_cma_ports_group, but the group is never released since
we don't remove its default group.
Remove default groups when device group is deleted.
Fixes: 045959db65 ("IB/cma: Add configfs for rdma_cm")
Link: https://lore.kernel.org/r/20200521072650.567908-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce create/destroy QP commands over the ioctl interface to let it
be extended to get an asynchronous event FD.
Link: https://lore.kernel.org/r/20200519072711.257271-8-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce create/destroy WQ commands over the ioctl interface to let it
be extended to get an asynchronous event FD.
Link: https://lore.kernel.org/r/20200519072711.257271-7-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce create/destroy SRQ commands over the ioctl interface to let it
be extended to get an asynchronous event FD.
Link: https://lore.kernel.org/r/20200519072711.257271-6-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Extend CQ to get its own asynchronous event FD.
The event FD is an optional attribute, in case wasn't given the ufile
event FD will be used.
Link: https://lore.kernel.org/r/20200519072711.257271-4-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Refactor related objects to use their own asynchronous event FD.
The ufile event FD will be the default in case an object won't have its own
event FD.
Link: https://lore.kernel.org/r/20200519072711.257271-3-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
While creating a uobject every create reaches a point where the uobject is
fully initialized. For ioctls that go on to copy_to_user this means they
need to open code the destruction of a fully created uobject - ie the
RDMA_REMOVE_DESTROY sort of flow.
Open coding this creates bugs, eg the CQ does not properly flush the
events list when it does its error unwind.
Provide a uverbs_finalize_uobj_create() function which indicates that the
uobject is fully initialized and that abort should call to destroy_hw to
destroy the uobj->object and related.
Methods can call this function if they go on to have error cases after
setting uobj->object. Once done those error cases can simply do return,
without an error unwind.
Link: https://lore.kernel.org/r/20200519072711.257271-2-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl7BzV8eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGg8EH/A2pXMTxtc96RI4S
sttEsUQqbakFS0Z/2tQPpMGr/qW2e5eHgsTX/a3SiUeZiIXk6f4lMFkMuctzBf7p
X77cNEDwGOEdbtCXTsMcmKSde7sP2zCXsPB8xTWLyE6rnaFRgikwwkeqgkIKhp1h
bvOQV0t9HNGvxGAM0iZeOvQAvFl4vd7nS123/MYbir9cugfQUSJRueQ4BiCiJqVE
6cNA7/vFzDJuFGszzIrJ7HXn/IdQMMWHkvTDjgBw0GZw1mDbGFbfbZwOeTz1ojCt
smUQ4tIFxBa/VA5zx7dOy2P2keHbSVf4VLkZRPcceT7OqVS65ETmFDp+qt5NdWM5
vZ8+7/0=
=CyYH
-----END PGP SIGNATURE-----
Merge tag 'v5.7-rc6' into rdma.git for-next
Linux 5.7-rc6
Conflict in drivers/net/ethernet/mellanox/mlx5/core/steering/dr_send.c
resolved by deleting dr_cq_event, matching how netdev resolved it.
Required for dependencies in the following patches.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch hooks the transmit side of the datagram netdev with
ipoib by setting the rdma_netdev_get_params function for the
hfi1 ib_device_ops structue. It also enables the receiving side
by adding the AIP capability into the default capabilities.
Link: https://lore.kernel.org/r/20200511160712.173205.65700.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Piotr Stankiewicz <piotr.stankiewicz@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This is the prerequisite modification to the ipoib ulp to allow a
rdma netdev to obtain the default ndo ops for init/uninit/open/close.
This is accomplished by setting the netdev ops field within the
callback function passed to the netdev allocation routine which
in turn was passed into the rdma netdev allocation routine.
This allows the rdma netdev to call back into the ulp to create the
resources required for connected mode operation.
Additionally as the ulp is not re-entrant, when switching modes,
the number of real tx queues is set to 1 for the connected mode.
For datagram mode the number of real tx queues is set to the
actual number of tx queues specified at the netdev's allocation.
For the internal ulp netdev the number of tx queues defaults to 1.
It is up to the rdma netdev to specify the actual number it can support.
When the driver does not support a rdma netdev for acceleration,
(-ENOTSUPPORTED return code or the verbs function for allocation is
NULL) the ipoib ulp functions are unaffected by using the internal
netdev allocated by the ipoib ulp.
Link: https://lore.kernel.org/r/20200511160706.173205.19086.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Gary Leshner <Gary.S.Leshner@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add a simple trace event taking context number and building simple
histogram to print packets distribution between contexts.
Link: https://lore.kernel.org/r/20200511160700.173205.84270.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When in connected mode ipoib sent broadcast pings which exceeded the mtu
size for broadcast addresses.
Add an mtu attribute to the rdma_netdev structure which ipoib sets to its
mcast mtu size.
The RDMA netdev uses this value to determine if the skb length is too long
for the mtu specified and if it is, drops the packet and logs an error
about the errant packet.
Link: https://lore.kernel.org/r/20200511160655.173205.14546.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Gary Leshner <Gary.S.Leshner@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
As described in earlier patches, ipoib netdev will share receive
contexts with existing VNIC netdev through a dummy netdev. The
following changes are made to achieve that:
- Set up netdev receive contexts after user contexts. A function is
added to count the available netdev receive contexts.
- Add functions to set/get receive map table free index.
- Rename NUM_VNIC_MAP_ENTRIES as NUM_NETDEV_MAP_ENTRIES.
- Let the dummy netdev own the receive contexts instead of VNIC.
- Allocate the dummy netdev when the hfi1 device is added and free it
when the device is removed.
- Initialize AIP RSM rules when the IpoIb rxq is initialized and
remove the rules when it is de-initialized.
- Convert VNIC to use the dummy netdev.
Link: https://lore.kernel.org/r/20200511160649.173205.4626.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds the rx functions for the dummy netdev:
- Functions to allocate/free the dummy netdev.
- Functions to allocate/free receiving contexts for the netdev.
- Functions to initialize/de-initialize the receive queue.
- Functions to enable/disable the receive queue.
Link: https://lore.kernel.org/r/20200511160643.173205.75087.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds the interrupt handler function, the NAPI poll
function, and its associated helper functions for receiving
accelerated ipoib packets. While we are here, fix the formats
of two error printouts.
Link: https://lore.kernel.org/r/20200511160637.173205.64890.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Ipoib netdev will share receive contexts with existing VNIC netdev.
To achieve that, a dummy netdev is allocated with hfi1_devdata to
own the receive contexts, and ipoib and VNIC netdevs will be put
on top of it. Each receive context is associated with a single
NAPI object.
This patch adds the functions to receive incoming packets for
accelerated ipoib.
Link: https://lore.kernel.org/r/20200511160631.173205.54184.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Rename num_vnic_contexts as num_ndetdev_contexts since VNIC and ipoib
will share the same set of receive contexts.
Link: https://lore.kernel.org/r/20200511160625.173205.53306.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently the ipoib UD mtu is restricted to 4K bytes. Remove this
limitation so that the IPOIB module can potentially use an MTU (in UD
mode) that is bounded by the MTU of the underlying device. A field is
added to the ib_port_attr structure to indicate the maximum physical
MTU the underlying device supports.
Link: https://lore.kernel.org/r/20200511160618.173205.23053.stgit@awfm-01.aw.intel.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This is implementation of RSM rule for AIP packets.
AIP rule will use rule RSM2 and will match standard
Infiniband packet containg BTH (LNH==BTH) and
having Dest QPN prefixed with value 0x81. Spread between
receive contexts will be done using source QPN bits.
VNIC and AIP will share receive contexts, so their rules
will point to the same RMT entries and their shared
code is moved to separate functions.
If any of the rules is active RMT mapping will be skipped
for latter.
Changed function hfi1_vnic_is_rsm_full to be more general
and moved it from main header to chip.c.
Changed the order of RSM rules because AIP rule as
more specific one is needed to be placed before more
general QOS rule. Rules are occupying two last RSM
registers.
Link: https://lore.kernel.org/r/20200511160612.173205.73002.stgit@awfm-01.aw.intel.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Adds capability to create a qpn to be recognized as an accelerated
UD QP for ipoib.
This is accomplished by reserving 0x81 in byte[0] of the qpn as the
prefix for these qp types and reserving qpns between 0x810000 and
0x81ffff.
The hfi1 capability mask already contained a flag for the VNIC netdev.
This has been renamed and extended to include both VNIC and ipoib.
The rvt code to allocate qps now recognizes this flag and sets 0x81
into byte[0] of the qpn.
The code to allocate qpns is modified to reset the qpn numbering when it
is detected that a value is located in byte[0] for a UD QP and it is a
qpn being requested for net dev use. If it is a regular UD QP then it is
allowable to have bits set in byte[0] of the qpn and provide the
previously normal behavior.
The code to free the qpn now checks for the AIP prefix value of 0x81 and
removes it from the qpn before being freed so that the lower 16 bit
number can be reused.
This patch requires minor changes in the IB core and ipoib to facilitate
the creation of accelerated UP QPs.
Link: https://lore.kernel.org/r/20200511160607.173205.11757.stgit@awfm-01.aw.intel.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Gary Leshner <Gary.S.Leshner@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The module parameter for KDETH qpns is being removed in favor
of always using the default value of 0x80 as the qpn prefix.
Defines have been added for various KDETH values including
the prefix of 0x80.
The reserved range now starts at the base value for KDETH
qpns (0x80) and extends up to and including the last qpn for
other reserved QP prefixed types.
Adjust other QP prefixed define names to match KDETH defined
names.
Link: https://lore.kernel.org/r/20200511160600.173205.27508.stgit@awfm-01.aw.intel.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Gary Leshner <Gary.S.Leshner@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This implements the transmit side of the multiple transmit queue RDMA
netdev used to accelerate ipoib. The receive side remains the ipoib
internal implementation.
The init/unint/open/stop netdev operations are saved off and called by the
versions within the hfi1 netdev in order to initialize the connected mode
resources present in ipoib thus allowing us to switch modes between
datagram and connected.
The datagram queue pair instantiated by the ipoib ulp is used by this
implementation for its queue pair number and to register with multicast.
The above queue pair is not used on transmit other than its qpn as the
verbs layer is skipped and packets are directly submitted to the sdma
engines.
Link: https://lore.kernel.org/r/20200511160554.173205.1369.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Gary Leshner <Gary.S.Leshner@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch implements the mechanism to accelerate the transmit side of
a multiple transmit queue RDMA netdev by submitting the packets to
the SDMA engine directly instead of sending through the verbs layer.
This patch also changes the UD/SEND_ONLY op to output the entropy value
in byte 0 of deth[1]. UD/SEND_ONLY_WITH_IMMEDIATE uses the previous
behavior with no entropy value being output.
The code in the ipoib rdma netdev which submits tx requests upon
successful submission will call trace_sdma_output_ibhdr to output
the ibhdr to the trace buffer.
Link: https://lore.kernel.org/r/20200511160548.173205.45616.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Gary Leshner <Gary.S.Leshner@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The accelerated IP capability bit is added to allow users to control
which feature is enabled and disabled.
Link: https://lore.kernel.org/r/20200511160541.173205.96870.stgit@awfm-01.aw.intel.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The host info feature allows the driver to infrom the EFA device
firmware with system configuration for debugging and troubleshooting
purposes.
The host info buffer is passed as an admin command DMA mapped control
buffer, and is unmapped and freed once the command CQE is consumed.
Currently, the setting of host info is done for each device on its
probe. Failing to set the host info for the device shall not disturb the
probe flow, any errors will be discarded.
Link: https://lore.kernel.org/r/20200512152204.93091-3-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When using a control buffer the ctrl_data bit should be set in order to
indicate the control buffer address is valid, not ctrl_data_indirect
which is used when the control buffer itself is indirect.
Fixes: e9c6c53730 ("RDMA/efa: Add common command handlers")
Link: https://lore.kernel.org/r/20200512152204.93091-2-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Missing INIT2INIT entry in the list of modify commands caused DEVX
applications to be unable to modify_qp for this transition state. Add the
MLX5_CMD_OP_INIT2INIT_QP opcode to the list of allowed DEVX opcodes.
Fixes: e662e14d80 ("IB/mlx5: Add DEVX support for modify and query commands")
Link: https://lore.kernel.org/r/20200513095550.211345-1-leon@kernel.org
Signed-off-by: Aharon Landau <aharonl@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When kobject_init_and_add() returns an error in the function
qib_create_port_files(), the function kobject_put() is not called for the
corresponding kobject, which potentially leads to memory leak.
This patch fixes the issue by calling kobject_put() even if
kobject_init_and_add() fails. In addition, the ppd->diagc_kobj is released
along with other kobjects when the sysfs is unregistered.
Fixes: f931551baf ("IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters")
Link: https://lore.kernel.org/r/20200512031328.189865.48627.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org>
Suggested-by: Lin Yi <teroincn@gmail.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When rq/srq sge length is smaller than sq sge length, it will produce a
local length error and may cause the bus to hang. Therefore, for rq wqe
and srq wqe, one reserved sge pointing to a reserved mr is used to avoid
this error.
Link: https://lore.kernel.org/r/1588931159-56875-10-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
srq_context is a local variables and is only used to get some fields from
buffer of mailbox. It's meaningless to copy mailbox's buffer's contents
back to it.
Link: https://lore.kernel.org/r/1588931159-56875-8-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The length information should be stored in the struct ib_mr object,
otherwise the length value of a valid mr object would always be 0.
Link: https://lore.kernel.org/r/1588931159-56875-7-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
For ilog2(x), if x is 0 and not a constant variable, it will return
-1. And there will be an error as below:
hns3 0000:7d:00.0 hns_0: Local work queue 0x8 catast error, sub_event type is: 2
So modify to_hr_hem_entries_shift() to return 0 if conut is 0.
Fixes: 54d6638765 ("RDMA/hns: Optimize WQE buffer size calculating process")
Link: https://lore.kernel.org/r/1588931159-56875-6-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When allocating eq buffer, the size of base address page should be defined
by eqe_ba_pg_sz instead of srqwqe_ba_pg_sz.
Fixes: 477a0a3870 ("RDMA/hns: Optimize 0 hop addressing for EQE buffer")
Link: https://lore.kernel.org/r/1588931159-56875-4-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The firmware has reduced the number of descriptions of command
HNS_ROCE_OPC_QUERY_PF_TIMER_RES to 1. The driver needs to adapt, otherwise
the hardware will report error 4(CMD_NEXT_ERR).
Fixes: 0e40dc2f70 ("RDMA/hns: Add timer allocation support for hip08")
Link: https://lore.kernel.org/r/1588931159-56875-3-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The qkey queried through the query ud qp verb is a fixed value and it
should be read from qp context.
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1588931159-56875-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The current codebase makes use of one-element arrays in the following
form:
struct something {
int length;
u8 data[1];
};
struct something *instance;
instance = kmalloc(sizeof(*instance) + size, GFP_KERNEL);
instance->length = size;
memcpy(instance->data, source, size);
but the preferred mechanism to declare variable-length types such as
these ones is a flexible array member[1][2], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on. So, replace
the one-element array with a flexible-array member.
Also, make use of the new struct_size() helper to properly calculate the
size of struct siw_pbl.
This issue was found with the help of Coccinelle and, audited and fixed
_manually_.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Link: https://lore.kernel.org/r/20200519233018.GA6105@embeddedor
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When Block Device Layer is disabled, BLK_MAX_SEGMENT_SIZE is undefined.
The rtrs is a transport library and should compile independently of the
block layer. The desired max segment size should be passed down by the
user.
Introduce max_segment_size parameter for the rtrs_clt_open() call.
Fixes: f7a7a5c228 ("block/rnbd: client: main functionality")
Fixes: 6a98d71dae ("RDMA/rtrs: client: main functionality")
Fixes: cb80329c94 ("RDMA/rtrs: client: private header with client structs and functions")
Fixes: b5c27cdb09 ("RDMA/rtrs: public interface header to establish RDMA connections")
Link: https://lore.kernel.org/r/20200519111419.924170-1-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fix to return negative error code -ENOMEM from the some error handling
cases instead of 0, as done elsewhere in this function.
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Fixes: 91b11610af ("RDMA/rtrs: server: sysfs interface functions")
Link: https://lore.kernel.org/r/20200519091912.134358-1-weiyongjun1@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove the if-statement and return the value contained in _err_,
unconditionally.
Link: https://lore.kernel.org/r/20200519163612.GA6043@embeddedor
Addresses-Coverity-ID: 1493753 ("Identical code for different branches")
Fixes: 6a98d71dae ("RDMA/rtrs: client: main functionality")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
These > comparisons should be >= to prevent accessing one element beyond
the end of the buffer.
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20200519154525.GA66801@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The problem is that "req->sg_cnt" is an unsigned int so if "nr" is
negative, it gets type promoted to a high positive value and the condition
is false. This patch fixes it by handling negatives separately.
Fixes: 6a98d71dae ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20200519133223.GN2078@kadam
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Support adding header modifying actions to the RDMA TX flow table.
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Avoid disabling device management for devices that don't support
Management datagrams (MADs) by checking if the "mad_agent" pointer is
initialized before calling ib_modify_port, also fix the error flow in
srpt_refresh_port() to disable device management if
ib_register_mad_agent() fail.
Fixes: 09f8a1486d ("RDMA/srpt: Fix handling of SR-IOV and iWARP ports")
Link: https://lore.kernel.org/r/20200514114720.141139-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Current description doesn't include new devices, change it by updating to
have more generic description and remove DRIVER_NAME and DRIVER_VERSION
defines.
Link: https://lore.kernel.org/r/20200513095304.210240-1-leon@kernel.org
Signed-off-by: Shay Drory <shayd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When I cat module parameter 'srpt_service_guid', it displays as follows.
It is better to add a newline for easy reading.
[root@hulk-202 ~]# cat /sys/module/ib_srpt/parameters/srpt_service_guid
0x0205cdfffe8346b9[root@hulk-202 ~]#
Link: https://lore.kernel.org/r/1589182629-27743-1-git-send-email-wangxiongfeng2@huawei.com
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The uverbs layer largely duplicate the code in ib_create_srq(), with the
slight difference that it passes in a udata. Move all the code together
into ib_create_srq_user() and provide an inline for kernel users, similar
to other create calls.
Link: https://lore.kernel.org/r/20200506082444.14502-6-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fix create WQ to use the given user handle, in addition dropped some
duplicated code from this flow.
Fixes: fd3c7904db ("IB/core: Change idr objects to use the new schema")
Fixes: f213c05272 ("IB/uverbs: Add WQ support")
Link: https://lore.kernel.org/r/20200506082444.14502-9-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Both wq_context and srq_context are some leftover from the past in uverbs
layer, they are not really in use, drop them.
Link: https://lore.kernel.org/r/20200506082444.14502-5-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add rtrs Makefile, Kconfig and also corresponding lines into upper layer
infiniband/ulp files.
Link: https://lore.kernel.org/r/20200511135131.27580-14-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This is the sysfs interface to rtrs sessions on server side:
/sys/class/rtrs-server/<SESS-NAME>/
*** rtrs session accepted from a client peer
|
|- paths/<SRC@DST>/
*** established paths from a client in a session
|
|- disconnect
| *** disconnect path
|
|- hca_name
| *** HCA name
|
|- hca_port
| *** HCA port
|
|- stats/
*** current path statistics
|
|- rdma
Link: https://lore.kernel.org/r/20200511135131.27580-13-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This introduces set of functions used on server side to account statistics
of RDMA data sent/received.
Link: https://lore.kernel.org/r/20200511135131.27580-12-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This is main functionality of rtrs-server module, which accepts set of
RDMA connections (so called rtrs session), creates/destroys sysfs entries
associated with rtrs session and notifies upper layer
(user of RTRS API) about RDMA requests or link events.
Link: https://lore.kernel.org/r/20200511135131.27580-11-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This header describes main structs and functions used by rtrs-server
module, mainly for accepting rtrs sessions, creating/destroying sysfs
entries, accounting statistics on server side.
Link: https://lore.kernel.org/r/20200511135131.27580-10-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This is the sysfs interface to rtrs sessions on client side:
/sys/class/rtrs-client/<SESS-NAME>/
*** rtrs session created by rtrs_clt_open() API call
|
|- max_reconnect_attempts
| *** number of reconnect attempts for session
|
|- add_path
| *** adds another connection path into rtrs session
|
|- paths/<SRC@DST>/
*** established paths to server in a session
|
|- disconnect
| *** disconnect path
|
|- reconnect
| *** reconnect path
|
|- remove_path
| *** remove current path
|
|- state
| *** retrieve current path state
|
|- hca_port
| *** HCA port number
|
|- hca_name
| *** HCA name
|
|- stats/
*** current path statistics
|
|- cpu_migration
|- rdma
|- reconnects
|- reset_all
Link: https://lore.kernel.org/r/20200511135131.27580-9-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This introduces set of functions used on client side to account statistics
of RDMA data sent/received, amount of IOs inflight, latency, cpu
migrations, etc. Almost all statistics are collected using percpu
variables.
Link: https://lore.kernel.org/r/20200511135131.27580-8-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This is main functionality of rtrs-client module, which manages set of
RDMA connections for each rtrs session, does multipathing, load balancing
and failover of RDMA requests.
Link: https://lore.kernel.org/r/20200511135131.27580-7-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This header describes main structs and functions used by rtrs-client
module, mainly for managing rtrs sessions, creating/destroying sysfs
entries, accounting statistics on client side.
Link: https://lore.kernel.org/r/20200511135131.27580-6-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This is a set of library functions existing as a rtrs-core module, used by
client and server modules.
Mainly these functions wrap IB and RDMA calls and provide a bit higher
abstraction for implementing of RTRS protocol on client or server sides.
Link: https://lore.kernel.org/r/20200511135131.27580-5-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
These are common private headers with rtrs protocol structures, logging,
sysfs and other helper functions, which are used on both client and server
sides.
Link: https://lore.kernel.org/r/20200511135131.27580-4-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce public header which provides set of API functions to establish
RDMA connections from client to server machine using RTRS protocol, which
manages RDMA connections for each session, does multipathing and load
balancing.
Main functions for client (active) side:
rtrs_clt_open() - Creates set of RDMA connections incapsulated
in IBTRS session and returns pointer on RTRS
session object.
rtrs_clt_close() - Closes RDMA connections associated with RTRS
session.
rtrs_clt_request() - Requests zero-copy RDMA transfer to/from
server.
Main functions for server (passive) side:
rtrs_srv_open() - Starts listening for RTRS clients on specified
port and invokes RTRS callbacks for incoming
RDMA requests or link events.
rtrs_srv_close() - Closes RTRS server context.
Link: https://lore.kernel.org/r/20200511135131.27580-3-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Move the bpf verifier trace check into the new switch statement in
HEAD.
Resolve the overlapping changes in hinic, where bug fixes overlap
the addition of VF support.
Signed-off-by: David S. Miller <davem@davemloft.net>
The output buffer used in mlx5_cmd_exec_inout() was wrongly changed from
pre-allocated srq_out pointer to an input "out" point. That leads to
unpredictable results in the get_srqc() call later.
Fixes: 31578defe4 ("RDMA/mlx5: Update mlx5_ib to use new cmd interface")
Link: https://lore.kernel.org/r/20200513100809.246315-1-leon@kernel.org
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When drop action is used the matching packet will stop processing in
steering and will be dropped. This functionality will allow users to drop
matching packets.
Link: https://lore.kernel.org/r/20200504054227.271486-1-leon@kernel.org
Signed-off-by: Daria Velikovsky <daria@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
User can configure default miss rule in order to skip matching in the user
domain and forward the packet to the kernel steering domain. When user
requests a default miss rule, we add steering rule to forward the traffic
to the next namespace.
Link: https://lore.kernel.org/r/20200504053012.270689-5-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Move part of the code that get the destinations into function so the code
will be more readable. In addition change the variables definition to be
in reversed christmas tree.
Link: https://lore.kernel.org/r/20200504053012.270689-4-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
From the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Required for dependencies in following patches
* branch 'mellanox/mlx5-next':
net/mlx5: Add support in forward to namespace
{IB/net}/mlx5: Simplify don't trap code
net/mlx5: Replace zero-length array with flexible-array
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The fs_core already supports creation of rules with multiple
actions/destinations. Refactor fs_core to handle the case
when don't trap rule is created with destination. Adapt the
calling code in the driver.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
All callers need the 'get', so do it in a central place before returning
the pointer.
Link: https://lore.kernel.org/r/20200506074701.9775-11-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
