mtk_ddp_comp_init() is called in a loop in mtk_drm_probe(), if it
fail, previous successive init component is not proccessed.
Thus uninitialize valid component and put their device if component
init failed.
Fixes: 119f517362 ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
if of_find_device_by_node() succeed, mtk_ddp_comp_init() doesn't have
a corresponding put_device(). Thus add put_device() to fix the exception
handling for this function implementation.
Fixes: d0afe37f52 ("drm/mediatek: support CMDQ interface in ddp component")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Even though cmdq client is created successfully, without the cmdq event,
cmdq could not work correctly, so use CPU when fail to get cmdq event.
Fixes: 60fa8c13ab ("drm/mediatek: Move gce event property to mutex device node")
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Remove mtk_drm_ddp.h which is included more than once
Fixes: 9aef5867c8 ("drm/mediatek: drop use of drmP.h")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
On A20R machines the interrupt pending bits in cause register need to be
updated by requesting the chipset to do it. This needs to be done to
find the interrupt cause and after interrupt service. In
commit 0b888c7f3a ("MIPS: SNI: Convert to new irq_chip functions") the
function to do after service update got lost, which caused spurious
interrupts.
Fixes: 0b888c7f3a ("MIPS: SNI: Convert to new irq_chip functions")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
- Set PERF_SAMPLE_PERIOD if attr->freq is set.
- Remove trailing commas from AMD JSON vendor event files.
- Don't clear event's period if set by a event definition term.
- Leader sampling shouldn't clear sample period in 'perf test'.
- Fix the "signal" test inline assembly when built with DEBUG=1.
- Fix memory leaks detected by ASAN, some in normal paths, some in error
paths.
- Fix 2 memory sanitizer warnings in 'perf bench'.
- Fix the ratio comments of miss-events in 'perf stat'.
- Prevent override of attr->sample_period for libpfm4 events.
- Sync kvm.h and in.h headers with the kernel sources.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test results:
The first ones are container based builds of tools/perf with and without libelf
support. Where clang is available, it is also used to build perf with/without
libelf, and building with LIBCLANGLLVM=1 (built-in clang) with gcc and clang
when clang and its devel libraries are installed.
The objtool and samples/bpf/ builds are disabled now that I'm switching from
using the sources in a local volume to fetching them from a http server to
build it inside the container, to make it easier to build in a container cluster.
Those will come back later.
Several are cross builds, the ones with -x-ARCH and the android one, and those
may not have all the features built, due to lack of multi-arch devel packages,
available and being used so far on just a few, like
debian:experimental-x-{arm64,mipsel}.
The 'perf test' one will perform a variety of tests exercising
tools/perf/util/, tools/lib/{bpf,traceevent,etc}, as well as run perf commands
with a variety of command line event specifications to then intercept the
sys_perf_event syscall to check that the perf_event_attr fields are set up as
expected, among a variety of other unit tests.
Then there is the 'make -C tools/perf build-test' ones, that build tools/perf/
with a variety of feature sets, exercising the build with an incomplete set of
features as well as with a complete one. It is planned to have it run on each
of the containers mentioned above, using some container orchestration
infrastructure. Get in contact if interested in helping having this in place.
$ grep "model name" -m1 /proc/cpuinfo
model name: AMD Ryzen 9 3900X 12-Core Processor
Wed 16 Sep 2020 11:15:24 AM -03
# export PERF_TARBALL=http://192.168.122.1/perf/perf-5.9.0-rc5.tar.xz
# dm
1 70.56 alpine:3.4 : Ok gcc (Alpine 5.3.0) 5.3.0, clang version 3.8.0 (tags/RELEASE_380/final)
2 71.39 alpine:3.5 : Ok gcc (Alpine 6.2.1) 6.2.1 20160822, clang version 3.8.1 (tags/RELEASE_381/final)
3 76.82 alpine:3.6 : Ok gcc (Alpine 6.3.0) 6.3.0, clang version 4.0.0 (tags/RELEASE_400/final)
4 83.00 alpine:3.7 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.0 (tags/RELEASE_500/final) (based on LLVM 5.0.0)
5 82.55 alpine:3.8 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.1 (tags/RELEASE_501/final) (based on LLVM 5.0.1)
6 85.51 alpine:3.9 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 5.0.1 (tags/RELEASE_502/final) (based on LLVM 5.0.1)
7 105.20 alpine:3.10 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 8.0.0 (tags/RELEASE_800/final) (based on LLVM 8.0.0)
8 120.42 alpine:3.11 : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 9.0.0 (https://git.alpinelinux.org/aports f7f0d2c2b8bcd6a5843401a9a702029556492689) (based on LLVM 9.0.0)
9 104.13 alpine:3.12 : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 10.0.0 (https://gitlab.alpinelinux.org/alpine/aports.git 7445adce501f8473efdb93b17b5eaf2f1445ed4c)
10 71.21 alt:p8 : Ok x86_64-alt-linux-gcc (GCC) 5.3.1 20151207 (ALT p8 5.3.1-alt3.M80P.1), clang version 3.8.0 (tags/RELEASE_380/final)
11 87.61 alt:p9 : Ok x86_64-alt-linux-gcc (GCC) 8.4.1 20200305 (ALT p9 8.4.1-alt0.p9.1), clang version 10.0.0
12 84.82 alt:sisyphus : Ok x86_64-alt-linux-gcc (GCC) 9.3.1 20200518 (ALT Sisyphus 9.3.1-alt1), clang version 10.0.1
13 62.90 amazonlinux:1 : Ok gcc (GCC) 7.2.1 20170915 (Red Hat 7.2.1-2), clang version 3.6.2 (tags/RELEASE_362/final)
14 100.02 amazonlinux:2 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-9), clang version 7.0.1 (Amazon Linux 2 7.0.1-1.amzn2.0.2)
15 22.01 android-ndk:r12b-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
16 21.86 android-ndk:r15c-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
17 28.10 centos:6 : Ok gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23)
18 33.15 centos:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39)
19 113.26 centos:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5), clang version 9.0.1 (Red Hat 9.0.1-2.module_el8.2.0+309+0c7b6b03)
20 55.11 clearlinux:latest : Ok gcc (Clear Linux OS for Intel Architecture) 10.2.1 20200908 releases/gcc-10.2.0-203-g127d693955, clang version 10.0.1
21 68.80 debian:8 : Ok gcc (Debian 4.9.2-10+deb8u2) 4.9.2, Debian clang version 3.5.0-10 (tags/RELEASE_350/final) (based on LLVM 3.5.0)
22 79.02 debian:9 : Ok gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516, clang version 3.8.1-24 (tags/RELEASE_381/final)
23 75.06 debian:10 : Ok gcc (Debian 8.3.0-6) 8.3.0, clang version 7.0.1-8 (tags/RELEASE_701/final)
24 79.97 debian:experimental : Ok gcc (Debian 10.2.0-7) 10.2.0, Debian clang version 11.0.0-+rc2-5
25 32.05 debian:experimental-x-arm64 : Ok aarch64-linux-gnu-gcc (Debian 10.2.0-3) 10.2.0
26 29.14 debian:experimental-x-mips64 : Ok mips64-linux-gnuabi64-gcc (Debian 9.3.0-8) 9.3.0
27 31.20 debian:experimental-x-mipsel : Ok mipsel-linux-gnu-gcc (Debian 9.3.0-8) 9.3.0
28 32.64 fedora:20 : Ok gcc (GCC) 4.8.3 20140911 (Red Hat 4.8.3-7)
29 32.22 fedora:22 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.5.0 (tags/RELEASE_350/final)
30 72.38 fedora:23 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.7.0 (tags/RELEASE_370/final)
31 83.19 fedora:24 : Ok gcc (GCC) 6.3.1 20161221 (Red Hat 6.3.1-1), clang version 3.8.1 (tags/RELEASE_381/final)
32 26.12 fedora:24-x-ARC-uClibc : Ok arc-linux-gcc (ARCompact ISA Linux uClibc toolchain 2017.09-rc2) 7.1.1 20170710
33 83.82 fedora:25 : Ok gcc (GCC) 6.4.1 20170727 (Red Hat 6.4.1-1), clang version 3.9.1 (tags/RELEASE_391/final)
34 95.77 fedora:26 : Ok gcc (GCC) 7.3.1 20180130 (Red Hat 7.3.1-2), clang version 4.0.1 (tags/RELEASE_401/final)
35 96.57 fedora:27 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-6), clang version 5.0.2 (tags/RELEASE_502/final)
36 106.17 fedora:28 : Ok gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 6.0.1 (tags/RELEASE_601/final)
37 111.99 fedora:29 : Ok gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 7.0.1 (Fedora 7.0.1-6.fc29)
38 115.80 fedora:30 : Ok gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 8.0.0 (Fedora 8.0.0-3.fc30)
39 29.10 fedora:30-x-ARC-glibc : Ok arc-linux-gcc (ARC HS GNU/Linux glibc toolchain 2019.03-rc1) 8.3.1 20190225
40 26.39 fedora:30-x-ARC-uClibc : Ok arc-linux-gcc (ARCv2 ISA Linux uClibc toolchain 2019.03-rc1) 8.3.1 20190225
41 116.53 fedora:31 : Ok gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 9.0.1 (Fedora 9.0.1-2.fc31)
42 98.99 fedora:32 : Ok gcc (GCC) 10.2.1 20200723 (Red Hat 10.2.1-1), clang version 10.0.0 (Fedora 10.0.0-2.fc32)
43 18.48 fedora:rawhide : FAIL gcc (GCC) 10.2.1 20200826 (Red Hat 10.2.1-3), clang version 11.0.0 (Fedora 11.0.0-0.2.rc1.fc34)
util/scripting-engines/trace-event-python.c: In function 'python_start_script':
util/scripting-engines/trace-event-python.c:1595:2: error: 'visibility' attribute ignored [-Werror=attributes]
1595 | PyMODINIT_FUNC (*initfunc)(void);
| ^~~~~~~~~~~~~~
At this point I should realize nobody is looking at this... Prove me
wrong and provide a fix, this is tricky and I need your help :-)
44 34.56 gentoo-stage3-amd64:latest : Ok gcc (Gentoo 9.3.0-r1 p3) 9.3.0
45 71.64 mageia:5 : Ok gcc (GCC) 4.9.2, clang version 3.5.2 (tags/RELEASE_352/final)
46 89.60 mageia:6 : Ok gcc (Mageia 5.5.0-1.mga6) 5.5.0, clang version 3.9.1 (tags/RELEASE_391/final)
47 114.09 mageia:7 : Ok gcc (Mageia 8.4.0-1.mga7) 8.4.0, clang version 8.0.0 (Mageia 8.0.0-1.mga7)
48 93.72 manjaro:latest : Ok gcc (GCC) 10.2.0, clang version 10.0.1
49 246.86 openmandriva:cooker : Ok gcc (GCC) 10.2.0 20200723 (OpenMandriva), OpenMandriva 11.0.0-0.20200909.1 clang version 11.0.0 (/builddir/build/BUILD/llvm-project-release-11.x/clang 5cb8ffbab42358a7cdb0a67acfadb84df0779579)
50 115.76 opensuse:15.0 : Ok gcc (SUSE Linux) 7.4.1 20190905 [gcc-7-branch revision 275407], clang version 5.0.1 (tags/RELEASE_501/final 312548)
51 124.22 opensuse:15.1 : Ok gcc (SUSE Linux) 7.5.0, clang version 7.0.1 (tags/RELEASE_701/final 349238)
52 114.75 opensuse:15.2 : Ok gcc (SUSE Linux) 7.5.0, clang version 9.0.1
53 108.32 opensuse:42.3 : Ok gcc (SUSE Linux) 4.8.5, clang version 3.8.0 (tags/RELEASE_380/final 262553)
54 108.20 opensuse:tumbleweed : Ok gcc (SUSE Linux) 10.2.1 20200825 [revision c0746a1beb1ba073c7981eb09f55b3d993b32e5c], clang version 10.0.1
55 28.17 oraclelinux:6 : Ok gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23.0.1)
56 33.23 oraclelinux:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39.0.5)
57 113.78 oraclelinux:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5.0.3), clang version 9.0.1 (Red Hat 9.0.1-2.0.1.module+el8.2.0+5599+9ed9ef6d)
58 31.14 ubuntu:12.04 : Ok gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3, Ubuntu clang version 3.0-6ubuntu3 (tags/RELEASE_30/final) (based on LLVM 3.0)
59 33.05 ubuntu:14.04 : Ok gcc (Ubuntu 4.8.4-2ubuntu1~14.04.4) 4.8.4
60 81.61 ubuntu:16.04 : Ok gcc (Ubuntu 5.4.0-6ubuntu1~16.04.12) 5.4.0 20160609, clang version 3.8.0-2ubuntu4 (tags/RELEASE_380/final)
61 27.06 ubuntu:16.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
62 27.31 ubuntu:16.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
63 26.36 ubuntu:16.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
64 27.31 ubuntu:16.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
65 27.09 ubuntu:16.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
66 26.11 ubuntu:16.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
67 275.70 ubuntu:18.04 : Ok gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0, clang version 6.0.0-1ubuntu2 (tags/RELEASE_600/final)
68 29.17 ubuntu:18.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
69 28.84 ubuntu:18.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
70 23.26 ubuntu:18.04-x-m68k : Ok m68k-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
71 28.13 ubuntu:18.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
72 28.87 ubuntu:18.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
73 30.32 ubuntu:18.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
74 184.84 ubuntu:18.04-x-riscv64 : Ok riscv64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
75 25.52 ubuntu:18.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
76 26.90 ubuntu:18.04-x-sh4 : Ok sh4-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
77 25.95 ubuntu:18.04-x-sparc64 : Ok sparc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
78 81.24 ubuntu:19.10 : Ok gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008, clang version 8.0.1-3build1 (tags/RELEASE_801/final)
79 86.43 ubuntu:20.04 : Ok gcc (Ubuntu 9.3.0-10ubuntu2) 9.3.0, clang version 10.0.0-4ubuntu1
80 30.55 ubuntu:20.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu 10-20200411-0ubuntu1) 10.0.1 20200411 (experimental) [master revision bb87d5cc77d:75961caccb7:f883c46b4877f637e0fa5025b4d6b5c9040ec566]
81 85.38 ubuntu:20.10 : Ok gcc (Ubuntu 10.2.0-5ubuntu2) 10.2.0, Ubuntu clang version 10.0.1-1
$
# uname -a
Linux five 5.9.0-rc3 #1 SMP Mon Aug 31 08:38:27 -03 2020 x86_64 x86_64 x86_64 GNU/Linux
# git log --oneline -1
ce9c13f31b perf stat: Fix the ratio comments of miss-events
# perf version --build-options
perf version 5.9.rc5.gce9c13f31b10
dwarf: [ on ] # HAVE_DWARF_SUPPORT
dwarf_getlocations: [ on ] # HAVE_DWARF_GETLOCATIONS_SUPPORT
glibc: [ on ] # HAVE_GLIBC_SUPPORT
gtk2: [ on ] # HAVE_GTK2_SUPPORT
syscall_table: [ on ] # HAVE_SYSCALL_TABLE_SUPPORT
libbfd: [ on ] # HAVE_LIBBFD_SUPPORT
libelf: [ on ] # HAVE_LIBELF_SUPPORT
libnuma: [ on ] # HAVE_LIBNUMA_SUPPORT
numa_num_possible_cpus: [ on ] # HAVE_LIBNUMA_SUPPORT
libperl: [ on ] # HAVE_LIBPERL_SUPPORT
libpython: [ on ] # HAVE_LIBPYTHON_SUPPORT
libslang: [ on ] # HAVE_SLANG_SUPPORT
libcrypto: [ on ] # HAVE_LIBCRYPTO_SUPPORT
libunwind: [ on ] # HAVE_LIBUNWIND_SUPPORT
libdw-dwarf-unwind: [ on ] # HAVE_DWARF_SUPPORT
zlib: [ on ] # HAVE_ZLIB_SUPPORT
lzma: [ on ] # HAVE_LZMA_SUPPORT
get_cpuid: [ on ] # HAVE_AUXTRACE_SUPPORT
bpf: [ on ] # HAVE_LIBBPF_SUPPORT
aio: [ on ] # HAVE_AIO_SUPPORT
zstd: [ on ] # HAVE_ZSTD_SUPPORT
# perf test
1: vmlinux symtab matches kallsyms : Ok
2: Detect openat syscall event : Ok
3: Detect openat syscall event on all cpus : Ok
4: Read samples using the mmap interface : Ok
5: Test data source output : Ok
6: Parse event definition strings : Ok
7: Simple expression parser : Ok
8: PERF_RECORD_* events & perf_sample fields : Ok
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
11: DSO data read : Ok
12: DSO data cache : Ok
13: DSO data reopen : Ok
14: Roundtrip evsel->name : Ok
15: Parse sched tracepoints fields : Ok
16: syscalls:sys_enter_openat event fields : Ok
17: Setup struct perf_event_attr : Ok
18: Match and link multiple hists : Ok
19: 'import perf' in python : Ok
20: Breakpoint overflow signal handler : Ok
21: Breakpoint overflow sampling : Ok
22: Breakpoint accounting : Ok
23: Watchpoint :
23.1: Read Only Watchpoint : Skip
23.2: Write Only Watchpoint : Ok
23.3: Read / Write Watchpoint : Ok
23.4: Modify Watchpoint : Ok
24: Number of exit events of a simple workload : Ok
25: Software clock events period values : Ok
26: Object code reading : Ok
27: Sample parsing : Ok
28: Use a dummy software event to keep tracking : Ok
29: Parse with no sample_id_all bit set : Ok
30: Filter hist entries : Ok
31: Lookup mmap thread : Ok
32: Share thread maps : Ok
33: Sort output of hist entries : Ok
34: Cumulate child hist entries : Ok
35: Track with sched_switch : Ok
36: Filter fds with revents mask in a fdarray : Ok
37: Add fd to a fdarray, making it autogrow : Ok
38: kmod_path__parse : Ok
39: Thread map : Ok
40: LLVM search and compile :
40.1: Basic BPF llvm compile : Ok
40.2: kbuild searching : Ok
40.3: Compile source for BPF prologue generation : Ok
40.4: Compile source for BPF relocation : Ok
41: Session topology : Ok
42: BPF filter :
42.1: Basic BPF filtering : Ok
42.2: BPF pinning : Ok
42.3: BPF prologue generation : Ok
42.4: BPF relocation checker : Ok
43: Synthesize thread map : Ok
44: Remove thread map : Ok
45: Synthesize cpu map : Ok
46: Synthesize stat config : Ok
47: Synthesize stat : Ok
48: Synthesize stat round : Ok
49: Synthesize attr update : Ok
50: Event times : Ok
51: Read backward ring buffer : Ok
52: Print cpu map : Ok
53: Merge cpu map : Ok
54: Probe SDT events : Ok
55: is_printable_array : Ok
56: Print bitmap : Ok
57: perf hooks : Ok
58: builtin clang support : Skip (not compiled in)
59: unit_number__scnprintf : Ok
60: mem2node : Ok
61: time utils : Ok
62: Test jit_write_elf : Ok
63: Test libpfm4 support : Skip (not compiled in)
64: Test api io : Ok
65: maps__merge_in : Ok
66: Demangle Java : Ok
67: Parse and process metrics : Ok
68: x86 rdpmc : Ok
69: Convert perf time to TSC : Ok
70: DWARF unwind : Ok
71: x86 instruction decoder - new instructions : Ok
72: Intel PT packet decoder : Ok
73: x86 bp modify : Ok
74: probe libc's inet_pton & backtrace it with ping : Ok
75: Use vfs_getname probe to get syscall args filenames : Ok
76: Check open filename arg using perf trace + vfs_getname: Ok
77: Zstd perf.data compression/decompression : Ok
78: Add vfs_getname probe to get syscall args filenames : Ok
#
$ cd ~acme/git/perf ; git log --oneline -1 ; time make -C tools/perf build-test
ce9c13f31b (HEAD -> perf/urgent, five/perf/urgent) perf stat: Fix the ratio comments of miss-events
make: Entering directory '/home/acme/git/perf/tools/perf'
- tarpkg: ./tests/perf-targz-src-pkg .
make_no_libpython_O: make NO_LIBPYTHON=1
make_no_sdt_O: make NO_SDT=1
make_no_scripts_O: make NO_LIBPYTHON=1 NO_LIBPERL=1
make_no_libunwind_O: make NO_LIBUNWIND=1
make_no_libelf_O: make NO_LIBELF=1
make_doc_O: make doc
make_perf_o_O: make perf.o
make_no_libbpf_DEBUG_O: make NO_LIBBPF=1 DEBUG=1
make_no_libbionic_O: make NO_LIBBIONIC=1
make_no_demangle_O: make NO_DEMANGLE=1
make_no_auxtrace_O: make NO_AUXTRACE=1
make_no_libcrypto_O: make NO_LIBCRYPTO=1
make_util_map_o_O: make util/map.o
make_help_O: make help
make_no_ui_O: make NO_NEWT=1 NO_SLANG=1 NO_GTK2=1
make_install_bin_O: make install-bin
make_util_pmu_bison_o_O: make util/pmu-bison.o
make_install_prefix_O: make install prefix=/tmp/krava
make_with_babeltrace_O: make LIBBABELTRACE=1
make_no_backtrace_O: make NO_BACKTRACE=1
make_no_syscall_tbl_O: make NO_SYSCALL_TABLE=1
make_tags_O: make tags
make_no_libaudit_O: make NO_LIBAUDIT=1
make_minimal_O: make NO_LIBPERL=1 NO_LIBPYTHON=1 NO_NEWT=1 NO_GTK2=1 NO_DEMANGLE=1 NO_LIBELF=1 NO_LIBUNWIND=1 NO_BACKTRACE=1 NO_LIBNUMA=1 NO_LIBAUDIT=1 NO_LIBBIONIC=1 NO_LIBDW_DWARF_UNWIND=1 NO_AUXTRACE=1 NO_LIBBPF=1 NO_LIBCRYPTO=1 NO_SDT=1 NO_JVMTI=1 NO_LIBZSTD=1 NO_LIBCAP=1 NO_SYSCALL_TABLE=1
make_install_prefix_slash_O: make install prefix=/tmp/krava/
make_install_O: make install
make_clean_all_O: make clean all
make_cscope_O: make cscope
make_with_clangllvm_O: make LIBCLANGLLVM=1
make_no_libnuma_O: make NO_LIBNUMA=1
make_with_libpfm4_O: make LIBPFM4=1
make_debug_O: make DEBUG=1
make_no_libdw_dwarf_unwind_O: make NO_LIBDW_DWARF_UNWIND=1
make_no_gtk2_O: make NO_GTK2=1
- /home/acme/git/perf/tools/perf/BUILD_TEST_FEATURE_DUMP_STATIC: make FEATURE_DUMP_COPY=/home/acme/git/perf/tools/perf/BUILD_TEST_FEATURE_DUMP_STATIC LDFLAGS='-static' feature-dump
make FEATURE_DUMP_COPY=/home/acme/git/perf/tools/perf/BUILD_TEST_FEATURE_DUMP_STATIC LDFLAGS='-static' feature-dump
make_static_O: make LDFLAGS=-static NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 NO_JVMTI=1
make_no_libperl_O: make NO_LIBPERL=1
make_pure_O: make
make_no_newt_O: make NO_NEWT=1
make_no_libbpf_O: make NO_LIBBPF=1
make_no_slang_O: make NO_SLANG=1
OK
make: Leaving directory '/home/acme/git/perf/tools/perf'
$
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCX2JLqAAKCRCyPKLppCJ+
J9FNAQDY2ZfjpL0eppFjxnxr0Of7T9ULpgsUeEVFsGETKmkAFQEAgWGcOoQ3hWZv
AjRWqbSNjwz40/wccztY9OSO2cVlegc=
=40Lf
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.9-2020-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Set PERF_SAMPLE_PERIOD if attr->freq is set.
- Remove trailing commas from AMD JSON vendor event files.
- Don't clear event's period if set by a event definition term.
- Leader sampling shouldn't clear sample period in 'perf test'.
- Fix the "signal" test inline assembly when built with DEBUG=1.
- Fix memory leaks detected by ASAN, some in normal paths, some in
error paths.
- Fix 2 memory sanitizer warnings in 'perf bench'.
- Fix the ratio comments of miss-events in 'perf stat'.
- Prevent override of attr->sample_period for libpfm4 events.
- Sync kvm.h and in.h headers with the kernel sources.
* tag 'perf-tools-fixes-for-v5.9-2020-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf stat: Fix the ratio comments of miss-events
perf test: Free formats for perf pmu parse test
perf metric: Do not free metric when failed to resolve
perf metric: Free metric when it failed to resolve
perf metric: Release expr_parse_ctx after testing
perf test: Fix memory leaks in parse-metric test
perf parse-event: Fix memory leak in evsel->unit
perf evlist: Fix cpu/thread map leak
perf metric: Fix some memory leaks - part 2
perf metric: Fix some memory leaks
perf test: Free aliases for PMU event map aliases test
perf vendor events amd: Remove trailing commas
perf test: Leader sampling shouldn't clear sample period
perf record: Don't clear event's period if set by a term
tools headers UAPI: update linux/in.h copy
tools headers UAPI: Sync kvm.h headers with the kernel sources
perf record: Prevent override of attr->sample_period for libpfm4 events
perf record: Set PERF_RECORD_PERIOD if attr->freq is set.
perf bench: Fix 2 memory sanitizer warnings
perf test: Fix the "signal" test inline assembly
improper memory allocations sizes. Nothing as exciting as a wildfire.
-----BEGIN PGP SIGNATURE-----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=ayvd
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk driver fixes from Stephen Boyd:
"A handful of clk driver fixes. Mostly they're for error paths or
improper memory allocations sizes. Nothing as exciting as a wildfire"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: lpass: Correct goto target in lpass_core_sc7180_probe()
clk: versatile: Add of_node_put() before return statement
clk: bcm: dvp: Select the reset framework
clk: rockchip: Fix initialization of mux_pll_src_4plls_p
clk: davinci: Use the correct size when allocating memory
Max's and Shravan's usernames were changed while @mellanox.com emails
were transferred to be @nvidia.com.
Fixes: f6da70d99c ("MAINTAINERS: Update Mellanox and Cumulus Network addresses to new domain")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The C3 BusMaster idle code takes lock in a number of places, some deep
inside the ACPI code. Instead of wrapping it all in RCU_NONIDLE, have
the driver take over RCU-idle duty and avoid flipping RCU state back
and forth a lot.
( by marking 'C3 && bm_check' as RCU_IDLE, we _must_ call enter_bm() for
that combination, otherwise we'll loose RCU-idle, this requires
shuffling some code around )
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some drivers have to do significant work, some of which relies on RCU
still being active. Instead of using RCU_NONIDLE in the drivers and
flipping RCU back on, allow drivers to take over RCU-idle duty.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make acpi_processor_idle() use the generic TLB flushing code.
This again removes RCU usage after rcu_idle_enter().
(XXX make every C3 invalidate TLBs, not just C3-BM)
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make acpi_processor_idle use the common broadcast code, there's no
reason not to. This also removes some RCU usage after
rcu_idle_enter().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: Borislav Petkov <bp@suse.de>
Tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The __this_cpu*() accessors are (in general) IRQ-unsafe which, given
that percpu-rwsem is a blocking primitive, should be just fine.
However, file_end_write() is used from IRQ context and will cause
load-store issues on architectures where the per-cpu accessors are not
natively irq-safe.
Fix it by using the IRQ-safe this_cpu_*() for operations on
read_count. This will generate more expensive code on a number of
platforms, which might cause a performance regression for some of the
other percpu-rwsem users.
If any such is reported, we can consider alternative solutions.
Fixes: 70fe2f4815 ("aio: fix freeze protection of aio writes")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lkml.kernel.org/r/20200915140750.137881-1-houtao1@huawei.com
'perf stat' displays miss ratio of L1-dcache, L1-icache, dTLB cache,
iTLB cache and LL-cache. Take L1-dcache for example, miss ratio is
caculated as "L1-dcache-load-misses/L1-dcache-loads". So "of all
L1-dcache hits" is unsuitable to describe it, and "of all L1-dcache
accesses" seems better.
The comments of L1-icache, dTLB cache, iTLB cache and LL-cache are
fixed in the same way.
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: linuxarm@huawei.com
Link: http://lore.kernel.org/lkml/1600253331-10535-1-git-send-email-liuqi115@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
syzbot is reporting OOB read at fbcon_resize() [1], for
commit 39b3cffb8c ("fbcon: prevent user font height or width change
from causing potential out-of-bounds access") is by error using
registered_fb[con2fb_map[vc->vc_num]]->fbcon_par->p->userfont (which was
set to non-zero) instead of fb_display[vc->vc_num].userfont (which remains
zero for that display).
We could remove tricky userfont flag [2], for we can determine it by
comparing address of the font data and addresses of built-in font data.
But since that commit is failing to fix the original OOB read [3], this
patch keeps the change minimal in case we decide to revert altogether.
[1] https://syzkaller.appspot.com/bug?id=ebcbbb6576958a496500fee9cf7aa83ea00b5920
[2] https://syzkaller.appspot.com/text?tag=Patch&x=14030853900000
[3] https://syzkaller.appspot.com/bug?id=6fba8c186d97cf1011ab17660e633b1cc4e080c9
Reported-by: syzbot <syzbot+b38b1ef6edf0c74a8d97@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 39b3cffb8c ("fbcon: prevent user font height or width change from causing potential out-of-bounds access")
Cc: George Kennedy <george.kennedy@oracle.com>
Link: https://lore.kernel.org/r/f6e3e611-8704-1263-d163-f52c906a4f06@I-love.SAKURA.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simply add Lakefield model ID. No additional changes are needed.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
[ rjw: Minor subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix the port-lock initialisation regression introduced by commit
a3cb39d258 ("serial: core: Allow detach and attach serial device for
console") by making sure that the lock is again initialised during
console setup.
The console may be registered before the serial controller has been
probed in which case the port lock needs to be initialised during
console setup by a call to uart_set_options(). The console-detach
changes introduced a regression in several drivers by effectively
removing that initialisation by not initialising the lock when the port
is used as a console (which is always the case during console setup).
Add back the early lock initialisation and instead use a new
console-reinit flag to handle the case where a console is being
re-attached through sysfs.
The question whether the console-detach interface should have been added
in the first place is left for another discussion.
Note that the console-enabled check in uart_set_options() is not
redundant because of kgdboc, which can end up reinitialising an already
enabled console (see commit 42b6a1baa3 ("serial_core: Don't
re-initialize a previously initialized spinlock.")).
Fixes: a3cb39d258 ("serial: core: Allow detach and attach serial device for console")
Cc: stable <stable@vger.kernel.org> # 5.7
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200909143101.15389-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit f743061a85 ("serial: core: Initialise spin lock before use in
uart_configure_port()") tried to work around a breakage introduced by
commit a3cb39d258 ("serial: core: Allow detach and attach serial
device for console") by adding a second initialisation of the port lock
when registering the port.
As reported by the build robots [1], this doesn't really solve the
regression introduced by the console-detach changes and also adds a
second redundant initialisation of the lock for normal ports.
Start cleaning up this mess by removing the redundant initialisation and
making sure that the port lock is again initialised once-only for ports
that aren't already in use as a console.
[1] https://lore.kernel.org/r/20200802054852.GR23458@shao2-debian
Fixes: f743061a85 ("serial: core: Initialise spin lock before use in uart_configure_port()")
Fixes: a3cb39d258 ("serial: core: Allow detach and attach serial device for console")
Cc: stable <stable@vger.kernel.org> # 5.7
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200909143101.15389-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check and return if there are errors. The response bits are valid
only on no errors.
Fixes: b7404a29cd ("usb: typec: intel_pmc_mux: Definitions for response status bits")
Signed-off-by: Madhusudanarao Amara <madhusudanarao.amara@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200916091102.27118-4-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk for the BYD zhaoxin notebook.
This notebook come with usb touchpad. And we would like to disable
touchpad wakeup on this notebook by default.
Signed-off-by: Penghao <penghao@uniontech.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200907023026.28189-1-penghao@uniontech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SCSI layer can go into an ugly loop if you ignore that a device is
gone. You need to report an error in the command rather than in the
return value of the queue method.
We need to specifically check for ENODEV. The issue goes back to the
introduction of the driver.
Fixes: 115bb1ffa5 ("USB: Add UAS driver")
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200916094026.30085-2-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sometimes the embedded controller firmware does not
terminate the list of alternate modes that the partner
supports in its response to the GET_ALTERNATE_MODES command.
Instead the firmware returns the supported alternate modes
over and over again until the driver stops requesting them.
If that happens, the number of modes for each alternate mode
will exceed the maximum 6 that is defined in the USB Power
Delivery specification. Making sure that can't happen by
adding a check for it.
This fixes NULL pointer dereference that is caused by the
overrun.
Fixes: ad74b8649b ("usb: typec: ucsi: Preliminary support for alternate modes")
Cc: stable@vger.kernel.org
Reported-by: Zwane Mwaikambo <zwanem@gmail.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200916090034.25119-3-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
UCSI specification quite clearly states that if a command
can't be completed in 10ms, the firmware must notify
about BUSY condition. Unfortunately almost none of the
platforms (the firmware on them) generate the BUSY
notification even if a command can't be completed in time.
The driver already considered that, and used a timeout
value of 5 seconds, but processing especially the alternate
mode discovery commands takes often considerable amount of
time from the firmware, much more than the 5 seconds. That
happens especially after bootup when devices are already
connected to the USB Type-C connector. For now on those
platforms the alternate mode discovery has simply failed
because of the timeout.
To improve the situation, increasing the timeout value for
the command completion to 1 minute. That should give enough
time for even the slowest firmware to process the commands.
Fixes: f56de278e8 ("usb: typec: ucsi: acpi: Move to the new API")
Cc: stable@vger.kernel.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200916090034.25119-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(NOTE: This is the minimal backportable fix, a full fix is being
developed at https://patchwork.freedesktop.org/patch/388048/)
The flags passed to the wait_entry.func are passed onwards to
try_to_wake_up(), which has a very particular interpretation for its
wake_flags. In particular, beyond the published WF_SYNC, it has a few
internal flags as well. Since we passed the fence->error down the chain
via the flags argument, these ended up in the default_wake_function
confusing the kernel/sched.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2110
Fixes: ef46884975 ("drm/i915: Propagate fence errors")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v5.4+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728152144.1100-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Joonas: Rebased and reordered into drm-intel-gt-next branch]
[Joonas: Added a note and link about more complete fix]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit f4b3c39554)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
To implement preempt-to-busy (and so efficient timeslicing and best utilization
of the hardware submission ports) we let the GPU run asynchronously in respect
to the ELSP submission queue. This created challenges in keeping and accessing
the driver state mirroring the asynchronous GPU execution.
The latest occurence of this was spotted by KCSAN:
[ 1413.563200] BUG: KCSAN: data-race in __await_execution+0x217/0x370 [i915]
[ 1413.563221]
[ 1413.563236] race at unknown origin, with read to 0xffff88885bb6c478 of 8 bytes by task 9654 on cpu 1:
[ 1413.563548] __await_execution+0x217/0x370 [i915]
[ 1413.563891] i915_request_await_dma_fence+0x4eb/0x6a0 [i915]
[ 1413.564235] i915_request_await_object+0x421/0x490 [i915]
[ 1413.564577] i915_gem_do_execbuffer+0x29b7/0x3c40 [i915]
[ 1413.564967] i915_gem_execbuffer2_ioctl+0x22f/0x5c0 [i915]
[ 1413.564998] drm_ioctl_kernel+0x156/0x1b0
[ 1413.565022] drm_ioctl+0x2ff/0x480
[ 1413.565046] __x64_sys_ioctl+0x87/0xd0
[ 1413.565069] do_syscall_64+0x4d/0x80
[ 1413.565094] entry_SYSCALL_64_after_hwframe+0x44/0xa9
To complicate matters, we have to both avoid the read tearing of *active and
avoid any write tearing as perform the pending[] -> inflight[] promotion of the
execlists.
This is because we cannot rely on the memcpy doing u64 aligned copies on all
kernels/platforms and so we opt to open-code it with explicit WRITE_ONCE
annotations to satisfy KCSAN.
v2: When in doubt, write the same comment again.
v3: Expanded commit message.
Fixes: b55230e5e8 ("drm/i915: Check for awaits on still currently executing requests")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716142207.13003-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Joonas: Rebased and reordered into drm-intel-gt-next branch]
[Joonas: Added expanded commit message from Tvrtko and Chris]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit b4d9145b01)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
As we now protect the timeline list using RCU, we can drop the
timeline->mutex for guarding the list iteration during context close, as
we are searching for an inflight request. Any new request will see the
context is banned and not be submitted. In doing so, pull the checks for
a concurrent submission of the request (notably the
i915_request_completed()) under the engine spinlock, to fully serialise
with __i915_request_submit()). That is in the case of preempt-to-busy
where the request may be completed during the __i915_request_submit(),
we need to be careful that we sample the request status after
serialising so that we don't miss the request the engine is actually
submitting.
Fixes: 4a31741521 ("drm/i915/gem: Refine occupancy test in kill_context()")
References: d22d2d073e ("drm/i915: Protect i915_request_await_start from early waits") # rcu protection of timeline->requests
References: https://gitlab.freedesktop.org/drm/intel/-/issues/1622
References: https://gitlab.freedesktop.org/drm/intel/-/issues/2158
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200806105954.7766-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit 736e785f9b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Avoid exposing a partially constructed context by deferring the
list_add() from the initial construction to the end of registration.
Otherwise, if we peek into the list of contexts from inside debugfs, we
may see the partially constructed context and chase down some dangling
incomplete pointers.
Reported-by: CQ Tang <cq.tang@intel.com>
Fixes: 3aa9945a52 ("drm/i915: Separate GEM context construction and registration to userspace")
References: f6e8aa3871 ("drm/i915: Report the number of closed vma held by each context in debugfs")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: CQ Tang <cq.tang@intel.com>
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730092856.23615-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit eb4dedae92)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Alexei Starovoitov says:
====================
pull-request: bpf 2020-09-15
The following pull-request contains BPF updates for your *net* tree.
We've added 12 non-merge commits during the last 19 day(s) which contain
a total of 10 files changed, 47 insertions(+), 38 deletions(-).
The main changes are:
1) docs/bpf fixes, from Andrii.
2) ld_abs fix, from Daniel.
3) socket casting helpers fix, from Martin.
4) hash iterator fixes, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The bpf_skc_to_* type casting helpers are available to
BPF_PROG_TYPE_TRACING. The traced PTR_TO_BTF_ID may be NULL.
For example, the skb->sk may be NULL. Thus, these casting helpers
need to check "!sk" also and this patch fixes them.
Fixes: 0d4fad3e57 ("bpf: Add bpf_skc_to_udp6_sock() helper")
Fixes: 478cfbdf5f ("bpf: Add bpf_skc_to_{tcp, tcp_timewait, tcp_request}_sock() helpers")
Fixes: af7ec13833 ("bpf: Add bpf_skc_to_tcp6_sock() helper")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200915182959.241101-1-kafai@fb.com
Just one fix in libsas for a resource leak in an error path.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX2FC6yYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishY6fAPwKubOj
52FQ48CXqFeLHbyGdKJR+ka5go9Am5Fd9PWS6gD/Tu+3xk553jSBJ1Adblhnltjc
nMf7l2jyjblSVBc4nXo=
=FBSu
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"Just one fix in libsas for a resource leak in an error path"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: libsas: Fix error path in sas_notify_lldd_dev_found()
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAl9grKITHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXu7gB/4+uML5b8rd06pJ3+NC53Mh5ooePvL5
CdZsLJP+reK8WeG4s3sXSs4kgzwZQcDFEC6k4STvM7B6fOEhvpi2Y7kuhayy75X4
6mZ7qoAnVvy83RZxAxDdgr0PuPRpL8m3cq1C+2hgOe2JaShhLVOC35IZqcBFKxrL
pp6blm7BFC2ST93JKQ3rLT0dhuT2CyLVkXheXbUK+36UnR1OxmgZLVp3PuPXVjdm
1zEkSjWCPAV/I78U7GOoLFx+sUgJwuG+owRQ1o8ZldMO/yj2gfCzfsSDivnjgB10
Q8ihUYZS2jBxg3L5y1pSYwgkOE/Q0iBRG91PueSq0c06mSuKp8COI0xG
=VCYI
-----END PGP SIGNATURE-----
Merge tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
"Two patches from Michael and Dexuan to fix vmbus hanging issues"
* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: vmbus: Add timeout to vmbus_wait_for_unload
Drivers: hv: vmbus: hibernation: do not hang forever in vmbus_bus_resume()
Kfir reported that pmtu exceptions are not created properly for
deployments where multipath routes use the same device.
After some digging I see 2 compounding problems:
1. ip_route_output_key_hash_rcu is updating the flowi4_oif *after*
the route lookup. This is the second use case where this has
been a problem (the first is related to use of vti devices with
VRF). I can not find any reason for the oif to be changed after the
lookup; the code goes back to the start of git. It does not seem
logical so remove it.
2. fib_lookups for exceptions do not call fib_select_path to handle
multipath route selection based on the hash.
The end result is that the fib_lookup used to add the exception
always creates it based using the first leg of the route.
An example topology showing the problem:
| host1
+------+
| eth0 | .209
+------+
|
+------+
switch | br0 |
+------+
|
+---------+---------+
| host2 | host3
+------+ +------+
| eth0 | .250 | eth0 | 192.168.252.252
+------+ +------+
+-----+ +-----+
| vti | .2 | vti | 192.168.247.3
+-----+ +-----+
\ /
=================================
tunnels
192.168.247.1/24
for h in host1 host2 host3; do
ip netns add ${h}
ip -netns ${h} link set lo up
ip netns exec ${h} sysctl -wq net.ipv4.ip_forward=1
done
ip netns add switch
ip -netns switch li set lo up
ip -netns switch link add br0 type bridge stp 0
ip -netns switch link set br0 up
for n in 1 2 3; do
ip -netns switch link add eth-sw type veth peer name eth-h${n}
ip -netns switch li set eth-h${n} master br0 up
ip -netns switch li set eth-sw netns host${n} name eth0
done
ip -netns host1 addr add 192.168.252.209/24 dev eth0
ip -netns host1 link set dev eth0 up
ip -netns host1 route add 192.168.247.0/24 \
nexthop via 192.168.252.250 dev eth0 nexthop via 192.168.252.252 dev eth0
ip -netns host2 addr add 192.168.252.250/24 dev eth0
ip -netns host2 link set dev eth0 up
ip -netns host2 addr add 192.168.252.252/24 dev eth0
ip -netns host3 link set dev eth0 up
ip netns add tunnel
ip -netns tunnel li set lo up
ip -netns tunnel li add br0 type bridge
ip -netns tunnel li set br0 up
for n in $(seq 11 20); do
ip -netns tunnel addr add dev br0 192.168.247.${n}/24
done
for n in 2 3
do
ip -netns tunnel link add vti${n} type veth peer name eth${n}
ip -netns tunnel link set eth${n} mtu 1360 master br0 up
ip -netns tunnel link set vti${n} netns host${n} mtu 1360 up
ip -netns host${n} addr add dev vti${n} 192.168.247.${n}/24
done
ip -netns tunnel ro add default nexthop via 192.168.247.2 nexthop via 192.168.247.3
ip netns exec host1 ping -M do -s 1400 -c3 -I 192.168.252.209 192.168.247.11
ip netns exec host1 ping -M do -s 1400 -c3 -I 192.168.252.209 192.168.247.15
ip -netns host1 ro ls cache
Before this patch the cache always shows exceptions against the first
leg in the multipath route; 192.168.252.250 per this example. Since the
hash has an initial random seed, you may need to vary the final octet
more than what is listed. In my tests, using addresses between 11 and 19
usually found 1 that used both legs.
With this patch, the cache will have exceptions for both legs.
Fixes: 4895c771c7 ("ipv4: Add FIB nexthop exceptions")
Reported-by: Kfir Itzhak <mastertheknife@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't check drm_crtc_state::active for this either, per its
documentation in include/drm/drm_crtc.h:
* Hence drivers must not consult @active in their various
* &drm_mode_config_funcs.atomic_check callback to reject an atomic
* commit.
atomic_remove_fb disables the CRTC as needed for disabling the primary
plane.
This prevents at least the following problems if the primary plane gets
disabled (e.g. due to destroying the FB assigned to the primary plane,
as happens e.g. with mutter in Wayland mode):
* The legacy cursor ioctl returned EINVAL for a non-0 cursor FB ID
(which enables the cursor plane).
* If the cursor plane was enabled, changing the legacy DPMS property
value from off to on returned EINVAL.
v2:
* Minor changes to code comment and commit log, per review feedback.
GitLab: https://gitlab.gnome.org/GNOME/mutter/-/issues/1108
GitLab: https://gitlab.gnome.org/GNOME/mutter/-/issues/1165
GitLab: https://gitlab.gnome.org/GNOME/mutter/-/issues/1344
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Turns out this breaks a lot of different hardware.
This reverts commit fc8c70526b.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create sysfs interface also for sienna_cichlid.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Recent characterization shows increased stutter latencies on some SKUs,
leading to underflow.
[how]
Update SOC params to account for this worst case latency.
Signed-off-by: Jun Lei <jun.lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previously we were only calling add_topology when hdcp was being enabled.
Now we call add_topology by default so the ERROR messages are printed if
the firmware is not loaded.
This error message is not relevant for normal display functionality so
no need to print a ERROR message.
[How]
Change DRM_ERROR to DRM_INFO
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This avoids smu issue when enabling runtime pptable update for
sienna_cichlid and so on. Runtime pptable udpate is needed for test
and debug purpose.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the resume stage of GPU recovery, start_cpsch will call pm_init
which set pm->allocated as false, cause the next pm_release_ib has
no chance to release ib memory.
Add pm_release_ib in stop_cpsch which will be called in the suspend
stage of GPU recovery.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix parameter description of tipc_link_bc_create()
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 16ad3f4022 ("tipc: introduce variable window congestion control")
Signed-off-by: Lu Wei <luwei32@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update supporters for IBM Power SRIOV Virtual NIC Device Driver.
Thomas Falcon is moving on to other works. Dany Madden, Lijun Pan
and Sukadev Bhattiprolu are the current supporters.
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Branden reports that commit
f88814cc25 ("efi/efivars: Expose RT service availability via efivars abstraction")
regresses UEFI platforms that implement GetVariable but not SetVariable
when booting kernels that have EFIBC (bootloader control) enabled.
The reason is that EFIBC is a user of the efivars abstraction, which was
updated to permit users that rely only on the read capability, but not on
the write capability. EFIBC is in the latter category, so it has to check
explicitly whether efivars supports writes.
Fixes: f88814cc25 ("efi/efivars: Expose RT service availability via efivars abstraction")
Tested-by: Branden Sherrell <sherrellbc@gmail.com>
Link: https://lore.kernel.org/linux-efi/AE217103-C96F-4AFC-8417-83EC11962004@gmail.com/
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The following leaks were detected by ASAN:
Indirect leak of 360 byte(s) in 9 object(s) allocated from:
#0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e)
#1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333
#2 0x560578f752fc in perf_pmu_parse util/pmu.y:59
#3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73
#4 0x560578e07045 in test__pmu tests/pmu.c:155
#5 0x560578de109b in run_test tests/builtin-test.c:410
#6 0x560578de109b in test_and_print tests/builtin-test.c:440
#7 0x560578de401a in __cmd_test tests/builtin-test.c:661
#8 0x560578de401a in cmd_test tests/builtin-test.c:807
#9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
#10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
#11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
#12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
#13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308
Fixes: cff7f956ec ("perf tests: Move pmu tests into separate object")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-12-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's dangerous to free the original metric when it's called from
resolve_metric() as it's already in the metric_list and might have other
resources too. Instead, it'd better let them bail out and be released
properly at the later stage.
So add a check when it's called from metricgroup__add_metric() and
release it. Also make sure that mp is set properly.
Fixes: 83de0b7d53 ("perf metric: Collect referenced metrics in struct metric_ref_node")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-10-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The metricgroup__add_metric() can find multiple match for a metric group
and it's possible to fail. Also it can fail in the middle like in
resolve_metric() even for single metric.
In those cases, the intermediate list and ids will be leaked like:
Direct leak of 3 byte(s) in 1 object(s) allocated from:
#0 0x7f4c938f40b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5)
#1 0x55f7e71c1bef in __add_metric util/metricgroup.c:683
#2 0x55f7e71c31d0 in add_metric util/metricgroup.c:906
#3 0x55f7e71c3844 in metricgroup__add_metric util/metricgroup.c:940
#4 0x55f7e71c488d in metricgroup__add_metric_list util/metricgroup.c:993
#5 0x55f7e71c488d in parse_groups util/metricgroup.c:1045
#6 0x55f7e71c60a4 in metricgroup__parse_groups_test util/metricgroup.c:1087
#7 0x55f7e71235ae in __compute_metric tests/parse-metric.c:164
#8 0x55f7e7124650 in compute_metric tests/parse-metric.c:196
#9 0x55f7e7124650 in test_recursion_fail tests/parse-metric.c:318
#10 0x55f7e7124650 in test__parse_metric tests/parse-metric.c:356
#11 0x55f7e70be09b in run_test tests/builtin-test.c:410
#12 0x55f7e70be09b in test_and_print tests/builtin-test.c:440
#13 0x55f7e70c101a in __cmd_test tests/builtin-test.c:661
#14 0x55f7e70c101a in cmd_test tests/builtin-test.c:807
#15 0x55f7e7126214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
#16 0x55f7e6fc41a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
#17 0x55f7e6fc41a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
#18 0x55f7e6fc41a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
#19 0x7f4c93492cc9 in __libc_start_main ../csu/libc-start.c:308
Fixes: 83de0b7d53 ("perf metric: Collect referenced metrics in struct metric_ref_node")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-9-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The test_generic_metric() missed to release entries in the pctx. Asan
reported following leak (and more):
Direct leak of 128 byte(s) in 1 object(s) allocated from:
#0 0x7f4c9396980e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e)
#1 0x55f7e748cc14 in hashmap_grow (/home/namhyung/project/linux/tools/perf/perf+0x90cc14)
#2 0x55f7e748d497 in hashmap__insert (/home/namhyung/project/linux/tools/perf/perf+0x90d497)
#3 0x55f7e7341667 in hashmap__set /home/namhyung/project/linux/tools/perf/util/hashmap.h:111
#4 0x55f7e7341667 in expr__add_ref util/expr.c:120
#5 0x55f7e7292436 in prepare_metric util/stat-shadow.c:783
#6 0x55f7e729556d in test_generic_metric util/stat-shadow.c:858
#7 0x55f7e712390b in compute_single tests/parse-metric.c:128
#8 0x55f7e712390b in __compute_metric tests/parse-metric.c:180
#9 0x55f7e712446d in compute_metric tests/parse-metric.c:196
#10 0x55f7e712446d in test_dcache_l2 tests/parse-metric.c:295
#11 0x55f7e712446d in test__parse_metric tests/parse-metric.c:355
#12 0x55f7e70be09b in run_test tests/builtin-test.c:410
#13 0x55f7e70be09b in test_and_print tests/builtin-test.c:440
#14 0x55f7e70c101a in __cmd_test tests/builtin-test.c:661
#15 0x55f7e70c101a in cmd_test tests/builtin-test.c:807
#16 0x55f7e7126214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
#17 0x55f7e6fc41a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
#18 0x55f7e6fc41a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
#19 0x55f7e6fc41a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
#20 0x7f4c93492cc9 in __libc_start_main ../csu/libc-start.c:308
Fixes: 6d432c4c8a ("perf tools: Add test_generic_metric function")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-8-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
