bluetooth, netfilter and can.
Current release - regressions:
- mlxsw: spectrum_qdisc: Pass handle, not band number to find_class()
to fix modifying offloaded qdiscs
- lantiq: net: fix duplicated skb in rx descriptor ring
- rtnetlink: fix regression in bridge VLAN configuration, empty info
is not an error, bot-generated "fix" was not needed
- libbpf: s/rx/tx/ typo on umem->rx_ring_setup_done to fix
umem creation
Current release - new code bugs:
- ethtool: fix NULL pointer dereference during module EEPROM dump via
the new netlink API
- mlx5e: don't update netdev RQs with PTP-RQ, the special purpose queue
should not be visible to the stack
- mlx5e: select special PTP queue only for SKBTX_HW_TSTAMP skbs
- mlx5e: verify dev is present in get devlink port ndo, avoid a panic
Previous releases - regressions:
- neighbour: allow NUD_NOARP entries to be force GCed
- further fixes for fallout from reorg of WiFi locking
(staging: rtl8723bs, mac80211, cfg80211)
- skbuff: fix incorrect msg_zerocopy copy notifications
- mac80211: fix NULL ptr deref for injected rate info
- Revert "net/mlx5: Arm only EQs with EQEs" it may cause missed IRQs
Previous releases - always broken:
- bpf: more speculative execution fixes
- netfilter: nft_fib_ipv6: skip ipv6 packets from any to link-local
- udp: fix race between close() and udp_abort() resulting in a panic
- fix out of bounds when parsing TCP options before packets
are validated (in netfilter: synproxy, tc: sch_cake and mptcp)
- mptcp: improve operation under memory pressure, add missing wake-ups
- mptcp: fix double-lock/soft lookup in subflow_error_report()
- bridge: fix races (null pointer deref and UAF) in vlan tunnel egress
- ena: fix DMA mapping function issues in XDP
- rds: fix memory leak in rds_recvmsg
Misc:
- vrf: allow larger MTUs
- icmp: don't send out ICMP messages with a source address of 0.0.0.0
- cdc_ncm: switch to eth%d interface naming
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xxUe
-----END PGP SIGNATURE-----
Merge tag 'net-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.13-rc7, including fixes from wireless, bpf,
bluetooth, netfilter and can.
Current release - regressions:
- mlxsw: spectrum_qdisc: Pass handle, not band number to find_class()
to fix modifying offloaded qdiscs
- lantiq: net: fix duplicated skb in rx descriptor ring
- rtnetlink: fix regression in bridge VLAN configuration, empty info
is not an error, bot-generated "fix" was not needed
- libbpf: s/rx/tx/ typo on umem->rx_ring_setup_done to fix umem
creation
Current release - new code bugs:
- ethtool: fix NULL pointer dereference during module EEPROM dump via
the new netlink API
- mlx5e: don't update netdev RQs with PTP-RQ, the special purpose
queue should not be visible to the stack
- mlx5e: select special PTP queue only for SKBTX_HW_TSTAMP skbs
- mlx5e: verify dev is present in get devlink port ndo, avoid a panic
Previous releases - regressions:
- neighbour: allow NUD_NOARP entries to be force GCed
- further fixes for fallout from reorg of WiFi locking (staging:
rtl8723bs, mac80211, cfg80211)
- skbuff: fix incorrect msg_zerocopy copy notifications
- mac80211: fix NULL ptr deref for injected rate info
- Revert "net/mlx5: Arm only EQs with EQEs" it may cause missed IRQs
Previous releases - always broken:
- bpf: more speculative execution fixes
- netfilter: nft_fib_ipv6: skip ipv6 packets from any to link-local
- udp: fix race between close() and udp_abort() resulting in a panic
- fix out of bounds when parsing TCP options before packets are
validated (in netfilter: synproxy, tc: sch_cake and mptcp)
- mptcp: improve operation under memory pressure, add missing
wake-ups
- mptcp: fix double-lock/soft lookup in subflow_error_report()
- bridge: fix races (null pointer deref and UAF) in vlan tunnel
egress
- ena: fix DMA mapping function issues in XDP
- rds: fix memory leak in rds_recvmsg
Misc:
- vrf: allow larger MTUs
- icmp: don't send out ICMP messages with a source address of 0.0.0.0
- cdc_ncm: switch to eth%d interface naming"
* tag 'net-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (139 commits)
net: ethernet: fix potential use-after-free in ec_bhf_remove
selftests/net: Add icmp.sh for testing ICMP dummy address responses
icmp: don't send out ICMP messages with a source address of 0.0.0.0
net: ll_temac: Avoid ndo_start_xmit returning NETDEV_TX_BUSY
net: ll_temac: Fix TX BD buffer overwrite
net: ll_temac: Add memory-barriers for TX BD access
net: ll_temac: Make sure to free skb when it is completely used
MAINTAINERS: add Guvenc as SMC maintainer
bnxt_en: Call bnxt_ethtool_free() in bnxt_init_one() error path
bnxt_en: Fix TQM fastpath ring backing store computation
bnxt_en: Rediscover PHY capabilities after firmware reset
cxgb4: fix wrong shift.
mac80211: handle various extensible elements correctly
mac80211: reset profile_periodicity/ema_ap
cfg80211: avoid double free of PMSR request
cfg80211: make certificate generation more robust
mac80211: minstrel_ht: fix sample time check
net: qed: Fix memcpy() overflow of qed_dcbx_params()
net: cdc_eem: fix tx fixup skb leak
net: hamradio: fix memory leak in mkiss_close
...
-----BEGIN PGP SIGNATURE-----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=JbJO
-----END PGP SIGNATURE-----
Merge tag 'for-5.13-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"One more fix, for a space accounting bug in zoned mode. It happens
when a block group is switched back rw->ro and unusable bytes (due to
zoned constraints) are subtracted twice.
It has user visible effects so I consider it important enough for late
-rc inclusion and backport to stable"
* tag 'for-5.13-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: fix negative space_info->bytes_readonly
-----BEGIN PGP SIGNATURE-----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=CY2S
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Clear 64-bit flag for host bridge windows below 4GB to fix a resource
allocation regression added in -rc1 (Punit Agrawal)
- Fix tegra194 MCFG quirk build regressions added in -rc1 (Jon Hunter)
- Avoid secondary bus resets on TI KeyStone C667X devices (Antti
Järvinen)
- Avoid secondary bus resets on some NVIDIA GPUs (Shanker Donthineni)
- Work around FLR erratum on Huawei Intelligent NIC VF (Chiqijun)
- Avoid broken ATS on AMD Navi14 GPU (Evan Quan)
- Trust Broadcom BCM57414 NIC to isolate functions even though it
doesn't advertise ACS support (Sriharsha Basavapatna)
- Work around AMD RS690 BIOSes that don't configure DMA above 4GB
(Mikel Rychliski)
- Fix panic during PIO transfer on Aardvark controller (Pali Rohár)
* tag 'pci-v5.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: aardvark: Fix kernel panic during PIO transfer
PCI: Add AMD RS690 quirk to enable 64-bit DMA
PCI: Add ACS quirk for Broadcom BCM57414 NIC
PCI: Mark AMD Navi14 GPU ATS as broken
PCI: Work around Huawei Intelligent NIC VF FLR erratum
PCI: Mark some NVIDIA GPUs to avoid bus reset
PCI: Mark TI C667X to avoid bus reset
PCI: tegra194: Fix MCFG quirk build regressions
PCI: of: Clear 64-bit flag for non-prefetchable memory below 4GB
If a task is killed during a page fault, it does not currently call
sb_end_pagefault(), which means that the filesystem cannot be frozen
at any time thereafter. This may be reported by lockdep like this:
====================================
WARNING: fsstress/10757 still has locks held!
5.13.0-rc4-build4+ #91 Not tainted
------------------------------------
1 lock held by fsstress/10757:
#0: ffff888104eac530
(
sb_pagefaults
as filesystem freezing is modelled as a lock.
Fix this by removing all the direct returns from within the function,
and using 'ret' to indicate whether we were interrupted or successful.
Fixes: 1cf7a1518a ("afs: Implement shared-writeable mmap")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/20210616154900.1958373-1-willy@infradead.org/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
static void ec_bhf_remove(struct pci_dev *dev)
{
...
struct ec_bhf_priv *priv = netdev_priv(net_dev);
unregister_netdev(net_dev);
free_netdev(net_dev);
pci_iounmap(dev, priv->dma_io);
pci_iounmap(dev, priv->io);
...
}
priv is netdev private data, but it is used
after free_netdev(). It can cause use-after-free when accessing priv
pointer. So, fix it by moving free_netdev() after pci_iounmap()
calls.
Fixes: 6af55ff52b ("Driver for Beckhoff CX5020 EtherCAT master module.")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* a minstrel HT sample check fix
* peer measurement could double-free on races
* certificate file generation at build time could
sometimes hang
* some parameters weren't reset between connections
in mac80211
* some extensible elements were treated as non-
extensible, possibly causuing bad connections
(or failures) if the AP adds data
-----BEGIN PGP SIGNATURE-----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=Nh7Q
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-net-2021-06-18' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
A couple of straggler fixes:
* a minstrel HT sample check fix
* peer measurement could double-free on races
* certificate file generation at build time could
sometimes hang
* some parameters weren't reset between connections
in mac80211
* some extensible elements were treated as non-
extensible, possibly causuing bad connections
(or failures) if the AP adds data
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds a new icmp.sh selftest for testing that the kernel will respond
correctly with an ICMP unreachable message with the dummy (192.0.0.8)
source address when there are no IPv4 addresses configured to use as source
addresses.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When constructing ICMP response messages, the kernel will try to pick a
suitable source address for the outgoing packet. However, if no IPv4
addresses are configured on the system at all, this will fail and we end up
producing an ICMP message with a source address of 0.0.0.0. This can happen
on a box routing IPv4 traffic via v6 nexthops, for instance.
Since 0.0.0.0 is not generally routable on the internet, there's a good
chance that such ICMP messages will never make it back to the sender of the
original packet that the ICMP message was sent in response to. This, in
turn, can create connectivity and PMTUd problems for senders. Fortunately,
RFC7600 reserves a dummy address to be used as a source for ICMP
messages (192.0.0.8/32), so let's teach the kernel to substitute that
address as a last resort if the regular source address selection procedure
fails.
Below is a quick example reproducing this issue with network namespaces:
ip netns add ns0
ip l add type veth peer netns ns0
ip l set dev veth0 up
ip a add 10.0.0.1/24 dev veth0
ip a add fc00:dead:cafe:42::1/64 dev veth0
ip r add 10.1.0.0/24 via inet6 fc00:dead:cafe:42::2
ip -n ns0 l set dev veth0 up
ip -n ns0 a add fc00:dead:cafe:42::2/64 dev veth0
ip -n ns0 r add 10.0.0.0/24 via inet6 fc00:dead:cafe:42::1
ip netns exec ns0 sysctl -w net.ipv4.icmp_ratelimit=0
ip netns exec ns0 sysctl -w net.ipv4.ip_forward=1
tcpdump -tpni veth0 -c 2 icmp &
ping -w 1 10.1.0.1 > /dev/null
tcpdump: verbose output suppressed, use -v[v]... for full protocol decode
listening on veth0, link-type EN10MB (Ethernet), snapshot length 262144 bytes
IP 10.0.0.1 > 10.1.0.1: ICMP echo request, id 29, seq 1, length 64
IP 0.0.0.0 > 10.0.0.1: ICMP net 10.1.0.1 unreachable, length 92
2 packets captured
2 packets received by filter
0 packets dropped by kernel
With this patch the above capture changes to:
IP 10.0.0.1 > 10.1.0.1: ICMP echo request, id 31127, seq 1, length 64
IP 192.0.0.8 > 10.0.0.1: ICMP net 10.1.0.1 unreachable, length 92
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Juliusz Chroboczek <jch@irif.fr>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As documented in Documentation/networking/driver.rst, the ndo_start_xmit
method must not return NETDEV_TX_BUSY under any normal circumstances, and
as recommended, we simply stop the tx queue in advance, when there is a
risk that the next xmit would cause a NETDEV_TX_BUSY return.
Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Just as the initial check, we need to ensure num_frag+1 buffers available,
as that is the number of buffers we are going to use.
This fixes a buffer overflow, which might be seen during heavy network
load. Complete lockup of TEMAC was reproducible within about 10 minutes of
a particular load.
Fixes: 84823ff80f ("net: ll_temac: Fix race condition causing TX hang")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a couple of memory-barriers to ensure correct ordering of read/write
access to TX BDs.
In xmit_done, we should ensure that reading the additional BD fields are
only done after STS_CTRL_APP0_CMPLT bit is set.
When xmit_done marks the BD as free by setting APP0=0, we need to ensure
that the other BD fields are reset first, so we avoid racing with the xmit
path, which writes to the same fields.
Finally, making sure to read APP0 of next BD after the current BD, ensures
that we see all available buffers.
Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With the skb pointer piggy-backed on the TX BD, we have a simple and
efficient way to free the skb buffer when the frame has been transmitted.
But in order to avoid freeing the skb while there are still fragments from
the skb in use, we need to piggy-back on the TX BD of the skb, not the
first.
Without this, we are doing use-after-free on the DMA side, when the first
BD of a multi TX BD packet is seen as completed in xmit_done, and the
remaining BDs are still being processed.
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan says:
====================
bnxt_en: Bug fixes
This patchset includes 3 small bug fixes to reinitialize PHY capabilities
after firmware reset, setup the chip's internal TQM fastpath ring
backing memory properly for RoCE traffic, and to free ethtool related
memory if driver probe fails.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
bnxt_ethtool_init() may have allocated some memory and we need to
call bnxt_ethtool_free() to properly unwind if bnxt_init_one()
fails.
Fixes: 7c38091814 ("bnxt_en: Refactor bnxt_init_one() and turn on TPA support on 57500 chips.")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TQM fastpath ring needs to be sized to store both the requester
and responder side of RoCE QPs in TQM for supporting bi-directional
tests. Fix bnxt_alloc_ctx_mem() to multiply the RoCE QPs by a factor of
2 when computing the number of entries for TQM fastpath ring. This
fixes an RX pipeline stall issue when running bi-directional max
RoCE QP tests.
Fixes: c7dd7ab4b2 ("bnxt_en: Improve TQM ring context memory sizing formulas.")
Signed-off-by: Rukhsana Ansari <rukhsana.ansari@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a missing bnxt_probe_phy() call in bnxt_fw_init_one() to
rediscover the PHY capabilities after a firmware reset. This can cause
some PHY related functionalities to fail after a firmware reset. For
example, in multi-host, the ability for any host to configure the PHY
settings may be lost after a firmware reset.
Fixes: ec5d31e3c1 ("bnxt_en: Handle firmware reset status during IF_UP.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- ARCv2 userspace ABI not populating a few registers
- Unbork CONFIG_HARDENED_USERCOPY for ARC
-----BEGIN PGP SIGNATURE-----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=F11Z
-----END PGP SIGNATURE-----
Merge tag 'arc-5.13-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- ARCv2 userspace ABI not populating a few registers
- Unbork CONFIG_HARDENED_USERCOPY for ARC
* tag 'arc-5.13-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: fix CONFIG_HARDENED_USERCOPY
ARCv2: save ABI registers across signal handling
- Have recordmcount check for valid st_shndx otherwise some archs may have
invalid references for the mcount location.
- Two fixes done for mapping pids to task names. Traces were not showing
the names of tasks when they should have.
- Fix to trace_clock_global() to prevent it from going backwards
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYMyrQBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qmMvAP4/teh5R2Z1ms0S0JlUM6sS3miNP1t/
x2QQtk2xuzbgmwD/Vn+01//7VyRPGuFm9dD82vSizQiNrns0EHXHB2cEPAQ=
=UWEU
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Have recordmcount check for valid st_shndx otherwise some archs may
have invalid references for the mcount location.
- Two fixes done for mapping pids to task names. Traces were not
showing the names of tasks when they should have.
- Fix to trace_clock_global() to prevent it from going backwards
* tag 'trace-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Do no increment trace_clock_global() by one
tracing: Do not stop recording comms if the trace file is being read
tracing: Do not stop recording cmdlines when tracing is off
recordmcount: Correct st_shndx handling
Remove recently added frequency invariance support from the CPPC
cpufreq driver, because it has turned out to be problematic and it
cannot be fixed properly on time for 5.13 (Viresh Kumar).
-----BEGIN PGP SIGNATURE-----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=tW38
-----END PGP SIGNATURE-----
Merge tag 'pm-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Remove recently added frequency invariance support from the CPPC
cpufreq driver, because it has turned out to be problematic and it
cannot be fixed properly on time for 5.13 (Viresh Kumar)"
* tag 'pm-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "cpufreq: CPPC: Add support for frequency invariance"
Here are 3 small USB fixes for reported problems for 5.13-rc7. They
include:
- disabling autosuspend for a cypress USB hub
- fixing the battery charger detection for the chipidea driver
- fixing a kernel panic in the dwc3 driver due to a previous
change in 5.13-rc1.
All have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYMx2AQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynxzwCfT3l+Po09jA4gzoM0O0A1UtnodGUAnA8ZoNLv
wNIq8x2ioaPtQT17k1W1
=/Sfd
-----END PGP SIGNATURE-----
Merge tag 'usb-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are three small USB fixes for reported problems for 5.13-rc7.
They include:
- disable autosuspend for a cypress USB hub
- fix the battery charger detection for the chipidea driver
- fix a kernel panic in the dwc3 driver due to a previous change in
5.13-rc1.
All have been in linux-next with no reported problems"
* tag 'usb-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: core: hub: Disable autosuspend for Cypress CY7C65632
usb: chipidea: imx: Fix Battery Charger 1.2 CDP detection
usb: dwc3: core: fix kernel panic when do reboot
amdgpu:
- GFX9 and 10 powergating fixes
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmDMRqkACgkQDHTzWXnE
hr7ITw/8Dm6N30vtkIdMA2HNZZ1a2fosilBvmDlP4ve9XYgBM5zO2s9Ig3a4tDm0
uruewJW8DAZadNvDe9CszXb8qPDauRe3h3BxQYZCQEndRBI57fRPqA7Mq3qhnh0D
RgnCbdBbx9B4zrCbk2hJF/oi0avW9+Pg5uir44OHDalUFraQ/6OnvPFOZqaGqfZa
A3Wh7wEkxzrFjUvKiNN1fg+JjoQ5nnDnQwPLdMXF+SYzMQtdVI/reqqI1LuJ0Ixc
9g8HRTWeZ7vs4tEHTCjnqjEWqFmp+R0Den5RZfHnQb+O/FHRDTjeduDMVkrM9Olu
DOUPSl2wJ4fW6/uI3fSkvR/fyxPEZqWuHzjxPnxnixQmpxqNw9LQ/3uCZh+TxvdH
S5Y71sBKE7vi/g8gA2m5riCZlFCX/1iU3hiaagWoINo0TwCodW1Dnsn6/WHTvFvc
pYfbol8oTwGvC99n+viLwy3als9z3Dce9vdzm2PV4H5q+8tcVtQJwuTWbzFlPr3w
JKWPZQuUORZapZiex/25QY4JQVhkXs2cx2d1ffJz1sb4y3MDCg9EPeoXROPpNnN+
utfXhD0xp4nQl9bQMMxloLDG5LLwXdevG5r4voIvd5TkD4Ott5QbvJRNitvF+gaW
HM98v5VyrTEEUYnPOXwzNeb1EY3YviQVh0WVgqL5lDAwo2MTinU=
=2F0i
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2021-06-18' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Not much happening in fixes land this week only one PR for two amdgpu
powergating fixes was waiting for me, maybe something will show up
over the weekend, maybe not.
amdgpu:
- GFX9 and 10 powergating fixes"
* tag 'drm-fixes-2021-06-18' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu/gfx10: enlarge CP_MEC_DOORBELL_RANGE_UPPER to cover full doorbell.
drm/amdgpu/gfx9: fix the doorbell missing when in CGPG issue.
Trying to start a new PIO transfer by writing value 0 in PIO_START register
when previous transfer has not yet completed (which is indicated by value 1
in PIO_START) causes an External Abort on CPU, which results in kernel
panic:
SError Interrupt on CPU0, code 0xbf000002 -- SError
Kernel panic - not syncing: Asynchronous SError Interrupt
To prevent kernel panic, it is required to reject a new PIO transfer when
previous one has not finished yet.
If previous PIO transfer is not finished yet, the kernel may issue a new
PIO request only if the previous PIO transfer timed out.
In the past the root cause of this issue was incorrectly identified (as it
often happens during link retraining or after link down event) and special
hack was implemented in Trusted Firmware to catch all SError events in EL3,
to ignore errors with code 0xbf000002 and not forwarding any other errors
to kernel and instead throw panic from EL3 Trusted Firmware handler.
Links to discussion and patches about this issue:
https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=3c7dcdac5c50https://lore.kernel.org/linux-pci/20190316161243.29517-1-repk@triplefau.lt/https://lore.kernel.org/linux-pci/971be151d24312cc533989a64bd454b4@www.loen.fr/https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/1541
But the real cause was the fact that during link retraining or after link
down event the PIO transfer may take longer time, up to the 1.44s until it
times out. This increased probability that a new PIO transfer would be
issued by kernel while previous one has not finished yet.
After applying this change into the kernel, it is possible to revert the
mentioned TF-A hack and SError events do not have to be caught in TF-A EL3.
Link: https://lore.kernel.org/r/20210608203655.31228-1-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Cc: stable@vger.kernel.org # 7fbcb5da81 ("PCI: aardvark: Don't rely on jiffies while holding spinlock")
Although the AMD RS690 chipset has 64-bit DMA support, BIOS implementations
sometimes fail to configure the memory limit registers correctly.
The Acer F690GVM mainboard uses this chipset and a Marvell 88E8056 NIC. The
sky2 driver programs the NIC to use 64-bit DMA, which will not work:
sky2 0000:02:00.0: error interrupt status=0x8
sky2 0000:02:00.0 eth0: tx timeout
sky2 0000:02:00.0 eth0: transmit ring 0 .. 22 report=0 done=0
Other drivers required by this mainboard either don't support 64-bit DMA,
or have it disabled using driver specific quirks. For example, the ahci
driver has quirks to enable or disable 64-bit DMA depending on the BIOS
version (see ahci_sb600_enable_64bit() in ahci.c). This ahci quirk matches
against the SB600 SATA controller, but the real issue is almost certainly
with the RS690 PCI host that it was commonly attached to.
To avoid this issue in all drivers with 64-bit DMA support, fix the
configuration of the PCI host. If the kernel is aware of physical memory
above 4GB, but the BIOS never configured the PCI host with this
information, update the registers with our values.
[bhelgaas: drop PCI_DEVICE_ID_ATI_RS690 definition]
Link: https://lore.kernel.org/r/20210611214823.4898-1-mikel@mikelr.com
Signed-off-by: Mikel Rychliski <mikel@mikelr.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The Broadcom BCM57414 NIC may be a multi-function device. While it does
not advertise an ACS capability, peer-to-peer transactions are not possible
between the individual functions, so it is safe to treat them as fully
isolated.
Add an ACS quirk for this device so the functions can be in independent
IOMMU groups and attached individually to userspace applications using
VFIO.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/1621645997-16251-1-git-send-email-michael.chan@broadcom.com
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Observed unexpected GPU hang during runpm stress test on 0x7341 rev 0x00.
Further debugging shows broken ATS is related.
Disable ATS on this part. Similar issues on other devices:
a2da5d8cc0 ("PCI: Mark AMD Raven iGPU ATS as broken in some platforms")
45beb31d3a ("PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken")
5e89cd303e ("PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as broken")
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20210602021255.939090-1-evan.quan@amd.com
Signed-off-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
Cc: stable@vger.kernel.org
pcie_flr() starts a Function Level Reset (FLR), waits 100ms (the maximum
time allowed for FLR completion by PCIe r5.0, sec 6.6.2), and waits for the
FLR to complete. It assumes the FLR is complete when a config read returns
valid data.
When we do an FLR on several Huawei Intelligent NIC VFs at the same time,
firmware on the NIC processes them serially. The VF may respond to config
reads before the firmware has completed its reset processing. If we bind a
driver to the VF (e.g., by assigning the VF to a virtual machine) in the
interval between the successful config read and completion of the firmware
reset processing, the NIC VF driver may fail to load.
Prevent this driver failure by waiting for the NIC firmware to complete its
reset processing. Not all NIC firmware supports this feature.
[bhelgaas: commit log]
Link: https://support.huawei.com/enterprise/en/doc/EDOC1100063073/87950645/vm-oss-occasionally-fail-to-load-the-in200-driver-when-the-vf-performs-flr
Link: https://lore.kernel.org/r/20210414132301.1793-1-chiqijun@huawei.com
Signed-off-by: Chiqijun <chiqijun@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Cc: stable@vger.kernel.org
Some NVIDIA GPU devices do not work with SBR. Triggering SBR leaves the
device inoperable for the current system boot. It requires a system
hard-reboot to get the GPU device back to normal operating condition
post-SBR. For the affected devices, enable NO_BUS_RESET quirk to avoid the
issue.
This issue will be fixed in the next generation of hardware.
Link: https://lore.kernel.org/r/20210608054857.18963-8-ameynarkhede03@gmail.com
Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
Cc: stable@vger.kernel.org
Some TI KeyStone C667X devices do not support bus/hot reset. The PCIESS
automatically disables LTSSM when Secondary Bus Reset is received and
device stops working. Prevent bus reset for these devices. With this
change, the device can be assigned to VMs with VFIO, but it will leak state
between VMs.
Reference: https://e2e.ti.com/support/processors/f/791/t/954382
Link: https://lore.kernel.org/r/20210315102606.17153-1-antti.jarvinen@gmail.com
Signed-off-by: Antti Järvinen <antti.jarvinen@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Cc: stable@vger.kernel.org
7f10074474 ("PCI: tegra: Add Tegra194 MCFG quirks for ECAM errata")
caused a few build regressions:
- 7f10074474 removed the Makefile rule for CONFIG_PCIE_TEGRA194, so
pcie-tegra.c can no longer be built as a module. Restore that rule.
- 7f10074474 added "#ifdef CONFIG_PCIE_TEGRA194" around the native
driver, but that's only set when the driver is built-in (for a module,
CONFIG_PCIE_TEGRA194_MODULE is defined).
The ACPI quirk is completely independent of the rest of the native
driver, so move the quirk to its own file and remove the #ifdef in the
native driver.
- 7f10074474 added symbols that are always defined but used only when
CONFIG_PCIEASPM, which causes warnings when CONFIG_PCIEASPM is not set:
drivers/pci/controller/dwc/pcie-tegra194.c:259:18: warning: ‘event_cntr_data_offset’ defined but not used [-Wunused-const-variable=]
drivers/pci/controller/dwc/pcie-tegra194.c:250:18: warning: ‘event_cntr_ctrl_offset’ defined but not used [-Wunused-const-variable=]
drivers/pci/controller/dwc/pcie-tegra194.c:243:27: warning: ‘pcie_gen_freq’ defined but not used [-Wunused-const-variable=]
Fixes: 7f10074474 ("PCI: tegra: Add Tegra194 MCFG quirks for ECAM errata")
Link: https://lore.kernel.org/r/20210610064134.336781-1-jonathanh@nvidia.com
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Alexandru and Qu reported this resource allocation failure on ROCKPro64 v2
and ROCK Pi 4B, both based on the RK3399:
pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff 64bit]
pci 0000:00:00.0: PCI bridge to [bus 01]
pci 0000:00:00.0: BAR 14: no space for [mem size 0x00100000]
pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
"BAR 14" is the PCI bridge's 32-bit non-prefetchable window, and our PCI
allocation code isn't smart enough to allocate it in a host bridge window
marked as 64-bit, even though this should work fine.
A DT host bridge description includes the windows from the CPU address
space to the PCI bus space. On a few architectures (microblaze, powerpc,
sparc), the DT may also describe PCI devices themselves, including their
BARs.
Before 9d57e61bf7 ("of/pci: Add IORESOURCE_MEM_64 to resource flags for
64-bit memory addresses"), of_bus_pci_get_flags() ignored the fact that
some DT addresses described 64-bit windows and BARs. That was a problem
because the virtio virtual NIC has a 32-bit BAR and a 64-bit BAR, and the
driver couldn't distinguish them.
9d57e61bf7 set IORESOURCE_MEM_64 for those 64-bit DT ranges, which fixed
the virtio driver. But it also set IORESOURCE_MEM_64 for host bridge
windows, which exposed the fact that the PCI allocator isn't smart enough
to put 32-bit resources in those 64-bit windows.
Clear IORESOURCE_MEM_64 from host bridge windows since we don't need that
information.
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Fixes: 9d57e61bf7 ("of/pci: Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addresses")
Link: https://lore.kernel.org/r/20210614230457.752811-1-punitagrawal@gmail.com
Reported-at: https://lore.kernel.org/lkml/7a1e2ebc-f7d8-8431-d844-41a9c36a8911@arm.com/
Reported-at: https://lore.kernel.org/lkml/YMyTUv7Jsd89PGci@m4/T/#u
Reported-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reported-by: Qu Wenruo <wqu@suse.com>
Tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
Tested-by: Domenico Andreoli <domenico.andreoli@linux.com>
Signed-off-by: Punit Agrawal <punitagrawal@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
The trace_clock_global() tries to make sure the events between CPUs is
somewhat in order. A global value is used and updated by the latest read
of a clock. If one CPU is ahead by a little, and is read by another CPU, a
lock is taken, and if the timestamp of the other CPU is behind, it will
simply use the other CPUs timestamp.
The lock is also only taken with a "trylock" due to tracing, and strange
recursions can happen. The lock is not taken at all in NMI context.
In the case where the lock is not able to be taken, the non synced
timestamp is returned. But it will not be less than the saved global
timestamp.
The problem arises because when the time goes "backwards" the time
returned is the saved timestamp plus 1. If the lock is not taken, and the
plus one to the timestamp is returned, there's a small race that can cause
the time to go backwards!
CPU0 CPU1
---- ----
trace_clock_global() {
ts = clock() [ 1000 ]
trylock(clock_lock) [ success ]
global_ts = ts; [ 1000 ]
<interrupted by NMI>
trace_clock_global() {
ts = clock() [ 999 ]
if (ts < global_ts)
ts = global_ts + 1 [ 1001 ]
trylock(clock_lock) [ fail ]
return ts [ 1001]
}
unlock(clock_lock);
return ts; [ 1000 ]
}
trace_clock_global() {
ts = clock() [ 1000 ]
if (ts < global_ts) [ false 1000 == 1000 ]
trylock(clock_lock) [ success ]
global_ts = ts; [ 1000 ]
unlock(clock_lock)
return ts; [ 1000 ]
}
The above case shows to reads of trace_clock_global() on the same CPU, but
the second read returns one less than the first read. That is, time when
backwards, and this is not what is allowed by trace_clock_global().
This was triggered by heavy tracing and the ring buffer checker that tests
for the clock going backwards:
Ring buffer clock went backwards: 20613921464 -> 20613921463
------------[ cut here ]------------
WARNING: CPU: 2 PID: 0 at kernel/trace/ring_buffer.c:3412 check_buffer+0x1b9/0x1c0
Modules linked in:
[..]
[CPU: 2]TIME DOES NOT MATCH expected:20620711698 actual:20620711697 delta:6790234 before:20613921463 after:20613921463
[20613915818] PAGE TIME STAMP
[20613915818] delta:0
[20613915819] delta:1
[20613916035] delta:216
[20613916465] delta:430
[20613916575] delta:110
[20613916749] delta:174
[20613917248] delta:499
[20613917333] delta:85
[20613917775] delta:442
[20613917921] delta:146
[20613918321] delta:400
[20613918568] delta:247
[20613918768] delta:200
[20613919306] delta:538
[20613919353] delta:47
[20613919980] delta:627
[20613920296] delta:316
[20613920571] delta:275
[20613920862] delta:291
[20613921152] delta:290
[20613921464] delta:312
[20613921464] delta:0 TIME EXTEND
[20613921464] delta:0
This happened more than once, and always for an off by one result. It also
started happening after commit aafe104aa9 was added.
Cc: stable@vger.kernel.org
Fixes: aafe104aa9 ("tracing: Restructure trace_clock_global() to never block")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
A while ago, when the "trace" file was opened, tracing was stopped, and
code was added to stop recording the comms to saved_cmdlines, for mapping
of the pids to the task name.
Code has been added that only records the comm if a trace event occurred,
and there's no reason to not trace it if the trace file is opened.
Cc: stable@vger.kernel.org
Fixes: 7ffbd48d5c ("tracing: Cache comms only after an event occurred")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The saved_cmdlines is used to map pids to the task name, such that the
output of the tracing does not just show pids, but also gives a human
readable name for the task.
If the name is not mapped, the output looks like this:
<...>-1316 [005] ...2 132.044039: ...
Instead of this:
gnome-shell-1316 [005] ...2 132.044039: ...
The names are updated when tracing is running, but are skipped if tracing
is stopped. Unfortunately, this stops the recording of the names if the
top level tracer is stopped, and not if there's other tracers active.
The recording of a name only happens when a new event is written into a
ring buffer, so there is no need to test if tracing is on or not. If
tracing is off, then no event is written and no need to test if tracing is
off or not.
Remove the check, as it hides the names of tasks for events in the
instance buffers.
Cc: stable@vger.kernel.org
Fixes: 7ffbd48d5c ("tracing: Cache comms only after an event occurred")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
One should only use st_shndx when >SHN_UNDEF and <SHN_LORESERVE. When
SHN_XINDEX, then use .symtab_shndx. Otherwise use 0.
This handles the case: st_shndx >= SHN_LORESERVE && st_shndx != SHN_XINDEX.
Link: https://lore.kernel.org/lkml/20210607023839.26387-1-mark-pk.tsai@mediatek.com/
Link: https://lkml.kernel.org/r/20210616154126.2794-1-mark-pk.tsai@mediatek.com
Reported-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
[handle endianness of sym->st_shndx]
Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Various elements are parsed with a requirement to have an
exact size, when really we should only check that they have
the minimum size that we need. Check only that and therefore
ignore any additional data that they might carry.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.cd101f8040a4.Iadf0e9b37b100c6c6e79c7b298cc657c2be9151a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If cfg80211_pmsr_process_abort() moves all the PMSR requests that
need to be freed into a local list before aborting and freeing them.
As a result, it is possible that cfg80211_pmsr_complete() will run in
parallel and free the same PMSR request.
Fix it by freeing the request in cfg80211_pmsr_complete() only if it
is still in the original pmsr list.
Cc: stable@vger.kernel.org
Fixes: 9bb7e0f24e ("cfg80211: add peer measurement with FTM initiator API")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.1fbef57e269a.I00294bebdb0680b892f8d1d5c871fd9dbe785a5e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We need to skip sampling if the next sample time is after jiffies, not before.
This patch fixes an issue where in some cases only very little sampling (or none
at all) is performed, leading to really bad data rates
Fixes: 80d55154b2 ("mac80211: minstrel_ht: significantly redesign the rate probing strategy")
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210617103854.61875-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
reported by syzkaller ("KVM: x86: Immediately reset the MMU context when the SMM
flag is cleared").
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmDLldwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPTOgf/XpAehLdWlx2877ulcBD0Kjt0tLvH
OFHRD1Ir0d1Ay3DX8qmxLquXHB4CoDGZBwi1d7AI165kUP/XLmV0bY6TZ74inI/P
CaD8Bsbm8+iBl5jrovEPc+223bK+3OFOvo2pk6M/MlsO/ExRikaPDtHOnkfousbl
nLX8v2qd7ihWyJOdLJMU9pV8E2iczQoCuH9yWBHdCrxRxWtPzkEekPWb0sujByiF
4tD7sqiEA3ugbF1Wm5keQV63NLplfxx+Zun0FV+tbpjjxQWAGl81dP+zmqok0sM/
qQCyZevt6jLLkL+Fn6hI6PP9OTeYreX2fgwhWXs71d2js33yNg5Veqx5Bw==
=Gs/y
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Miscellaneous bugfixes.
The main interesting one is a NULL pointer dereference reported by
syzkaller ("KVM: x86: Immediately reset the MMU context when the SMM
flag is cleared")"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: Fix kvm_check_cap() assertion
KVM: x86/mmu: Calculate and check "full" mmu_role for nested MMU
KVM: X86: Fix x86_emulator slab cache leak
KVM: SVM: Call SEV Guest Decommission if ASID binding fails
KVM: x86: Immediately reset the MMU context when the SMM flag is cleared
KVM: x86: Fix fall-through warnings for Clang
KVM: SVM: fix doc warnings
KVM: selftests: Fix compiling errors when initializing the static structure
kvm: LAPIC: Restore guard to prevent illegal APIC register access
The source (&dcbx_info->operational.params) and dest
(&p_hwfn->p_dcbx_info->set.config.params) are both struct qed_dcbx_params
(560 bytes), not struct qed_dcbx_admin_params (564 bytes), which is used
as the memcpy() size.
However it seems that struct qed_dcbx_operational_params
(dcbx_info->operational)'s layout matches struct qed_dcbx_admin_params
(p_hwfn->p_dcbx_info->set.config)'s 4 byte difference (3 padding, 1 byte
for "valid").
On the assumption that the size is wrong (rather than the source structure
type), adjust the memcpy() size argument to be 4 bytes smaller and add
a BUILD_BUG_ON() to validate any changes to the structure sizes.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
when usbnet transmit a skb, eem fixup it in eem_tx_fixup(),
if skb_copy_expand() failed, it return NULL,
usbnet_start_xmit() will have no chance to free original skb.
fix it by free orginal skb in eem_tx_fixup() first,
then check skb clone status, if failed, return NULL to usbnet.
Fixes: 9f722c0978 ("usbnet: CDC EEM support (v5)")
Signed-off-by: Linyu Yuan <linyyuan@codeaurora.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmDKfQMACgkQSD+KveBX
+j7uBAgAuwValxUKIGqJBoIVkj910r2AAyFoPrKNOyIX9d6saGHigMDHgrovIFlz
epZ1i4FLYFJTB96YDFh/P+gE6vh8d13vc0GQgpuyymDRn6aKuF01bwZupASxnH9L
TkiSq1MsLB5Nilfue/MfM20uBqRRRvwTLTeW5jWr3YqmaB1o/1sZzk47S0np7H/P
kNcLwZH49ujn99EHpoDDvHPJqW31qKfKwrnNiT2U7069vHspvSV9OWNwI/gz2TOY
geADSSieLo//zebjn88SFGWR0cPW8VQSWmU7BqcKAb+9piWfM3h25xDNpSsxhhcD
C0+d8i48il20ySuR2DuciZJ91iQQeg==
=4kRA
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2021-06-16' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2021-06-16
This series introduces some fixes to mlx5 driver.
Please pull and let me know if there is any problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.
Fixes: d6b6d98778 ("be2net: use PCIe AER capability")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
KVM_CHECK_EXTENSION ioctl can return any negative value on error,
and not necessarily -1. Change the assertion to reflect that.
Signed-off-by: Fuad Tabba <tabba@google.com>
Message-Id: <20210615150443.1183365-1-tabba@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
