The board typically has 2 populated SFF interfaces. The mv88e6xxx
driver currently supports SFF modules connected to ports 9 and 10 of
the mv88e6390. Add support for sff2, which is connected to port 9.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The switch has an SFF attached to port 5. Add the SFF device, the
pinmux for its GPIOs, and list the port in the switch configuration.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
NOR and IFC controller connectivity is big-endian.
So add big-endian field in nor device tree node allowing
IFC controller to read/write data from/to the flash correctly.
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX6ULL is a lite version of i.MX6UL, its full name
is i.MX6 UltraLiteLite, NOT UlltraLite.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX6SLL has GPIO clock gates in CCM CCGR, add
clock property for GPIO driver to make sure all
GPIO banks work as expected.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signals available on both i.MX6UL and i.MX6ULL should have the same name
because it is the case of all others common signals, it avoids to make
mistakes (use the wrong ones) and it makes writing device tree files
less complicated. For example:
imx6ul-imx6ull-board.dtsi:
...
pinctrl_uart5: uart5grp {
fsl,pins = <
MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1
MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1
>;
};
imx6ul-board.dts:
#include <imx6ul.dtsi>
#include <imx6ul-imx6ull-board.dtsi>
...
imx6ull-board.dts:
#include <imx6ull.dtsi>
#include <imx6ul-imx6ull-board.dtsi>
...
Without this patch, the imx6ull-board.dtb will use
MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX instead of
MX6ULL_PAD_UART5_RX_DATA__UART5_DCE_RX and the uart5 will be
misconfigured.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Setting a stdout-path in the .dtb is convenient because then the user
gets a serial console on the RS-232 connector without any extra effort
of figuring out the relevant 'console=' boot parameter.
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The WaRP7 has one mikroBUS socket on the back to plug click boards.
This patch allows to interact with some of these
i2c modules (EEPROM, RTC and so on).
Signed-off-by: Pierre-Jean Texier <texier.pj2@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The "EDIMM STARTER KIT i.Core 1.5 MIPI Evaluation" is based on the 1.5 version
of the i.Core MX6 cpu module. The 1.5 version differs from the original one for
a few details, including the ethernet PHY interface clock provider.
With this commit, the ethernet interface works properly:
SMSC LAN8710/LAN8720 2188000.ethernet-1:00: attached PHY driver
While before using the 1.5 version, ethernet failed to startup do to un-clocked
PHY interface:
fec 2188000.ethernet eth0: could not attach to PHY
Fixes: 3fe0883577 ("ARM: dts: imx6q: Add Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit support")
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The 1.5 version of Engicam's i.Core MX6 CPU module features a different clock
provider for the ethernet's PHY interface. Adjust the FEC ptp clock to
reference CLK_ENET_REF clock source, and set SION bit of
MX6QDL_PAD_GPIO_16__ENET_REF_CLK to adjust the input path of that pin.
The newly introduced imx6ql-icore-1.5.dtsi allows to collect in a single
place differences between version '1.0' and '1.5' of the module.
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Move usdhc2 and gpmi along with pinctrl nodes on
imx6ul-isiot.dtsi from dts files and mark it as 'disabled'
and the relevant dts will enable the status as 'okay'
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Define the Messaging Unit (MU) for i.MX7 in the processor's dtsi.
The respective driver is added in the next commit.
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The i.MX7ULP B0 chip has some pin changes for USB and VIU
module, update pinfunc header file accordingly.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The MC13892 Analog-to-Digital input pins (ADIN5-7) are exposed on the
imx51-babbage board.
Pass the "fsl,mc13xxx-uses-adc" property so that the MC13892 ADC
block can work.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add "gpio-ranges" property to establish connections between GPIOs
and PINs on i.MX6SLL pinctrl driver, for details, please refer to
Documentation/devicetree/bindings/gpio/gpio.txt of "gpio-ranges"
property.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
A couple of new helper functions in preparation for some tree wide
clean-ups.
-----BEGIN PGP SIGNATURE-----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=AaKv
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"A couple of new helper functions in preparation for some tree wide
clean-ups.
I'm sending these new helpers now for rc2 in order to simplify the
dependencies on subsequent cleanups across the tree in 4.20"
* tag 'devicetree-fixes-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: Add device_type access helper functions
of: add node name compare helper functions
of: add helper to lookup compatible child node
First batch of fixes post-merge window:
- A handful of devicetree changes for i.MX2{3,8} to change over to new
panel bindings. The platforms were moved from legacy framebuffers
to DRM and some development board panels hadn't yet been converted.
- OMAP fixes related to ti-sysc driver conversion fallout, fixing some
register offsets, no_console_suspend fixes, etc.
- Droid4 changes to fix flaky eMMC probing and vibrator DTS mismerge.
- Fixed 0755->0644 permissions on a newly added file.
- Defconfig changes to make ARM Versatile more useful with QEMU
(helps testing).
- Enable defconfig options for new TI SoC platform that was merged this
window (AM6).
-----BEGIN PGP SIGNATURE-----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=Pdac
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"First batch of fixes post-merge window:
- A handful of devicetree changes for i.MX2{3,8} to change over to
new panel bindings. The platforms were moved from legacy
framebuffers to DRM and some development board panels hadn't yet
been converted.
- OMAP fixes related to ti-sysc driver conversion fallout, fixing
some register offsets, no_console_suspend fixes, etc.
- Droid4 changes to fix flaky eMMC probing and vibrator DTS mismerge.
- Fixed 0755->0644 permissions on a newly added file.
- Defconfig changes to make ARM Versatile more useful with QEMU
(helps testing).
- Enable defconfig options for new TI SoC platform that was merged
this window (AM6)"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: defconfig: Enable TI's AM6 SoC platform
ARM: defconfig: Update the ARM Versatile defconfig
ARM: dts: omap4-droid4: Fix emmc errors seen on some devices
ARM: dts: Fix file permission for am335x-osd3358-sm-red.dts
ARM: imx_v6_v7_defconfig: Select CONFIG_DRM_PANEL_SEIKO_43WVF1G
ARM: mxs_defconfig: Select CONFIG_DRM_PANEL_SEIKO_43WVF1G
ARM: dts: imx23-evk: Convert to the new display bindings
ARM: dts: imx23-evk: Move regulators outside simple-bus
ARM: dts: imx28-evk: Convert to the new display bindings
ARM: dts: imx28-evk: Move regulators outside simple-bus
Revert "ARM: dts: imx7d: Invert legacy PCI irq mapping"
arm: dts: am4372: setup rtc as system-power-controller
ARM: dts: omap4-droid4: fix vibrations on Droid 4
bus: ti-sysc: Fix no_console_suspend handling
bus: ti-sysc: Fix module register ioremap for larger offsets
ARM: OMAP2+: Fix module address for modules using mpu_rt_idx
ARM: OMAP2+: Fix null hwmod for ti-sysc debug
Pull x86 fixes from Thomas Gleixner:
"Speculation:
- Make the microcode check more robust
- Make the L1TF memory limit depend on the internal cache physical
address space and not on the CPUID advertised physical address
space, which might be significantly smaller. This avoids disabling
L1TF on machines which utilize the full physical address space.
- Fix the GDT mapping for EFI calls on 32bit PTI
- Fix the MCE nospec implementation to prevent #GP
Fixes and robustness:
- Use the proper operand order for LSL in the VDSO
- Prevent NMI uaccess race against CR3 switching
- Add a lockdep check to verify that text_mutex is held in
text_poke() functions
- Repair the fallout of giving native_restore_fl() a prototype
- Prevent kernel memory dumps based on usermode RIP
- Wipe KASAN shadow stack before rewinding the stack to prevent false
positives
- Move the AMS GOTO enforcement to the actual build stage to allow
user API header extraction without a compiler
- Fix a section mismatch introduced by the on demand VDSO mapping
change
Miscellaneous:
- Trivial typo, GCC quirk removal and CC_SET/OUT() cleanups"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pti: Fix section mismatch warning/error
x86/vdso: Fix lsl operand order
x86/mce: Fix set_mce_nospec() to avoid #GP fault
x86/efi: Load fixmap GDT in efi_call_phys_epilog()
x86/nmi: Fix NMI uaccess race against CR3 switching
x86: Allow generating user-space headers without a compiler
x86/dumpstack: Don't dump kernel memory based on usermode RIP
x86/asm: Use CC_SET()/CC_OUT() in __gen_sigismember()
x86/alternatives: Lockdep-enforce text_mutex in text_poke*()
x86/entry/64: Wipe KASAN stack shadow before rewind_stack_do_exit()
x86/irqflags: Mark native_restore_fl extern inline
x86/build: Remove jump label quirk for GCC older than 4.5.2
x86/Kconfig: Fix trivial typo
x86/speculation/l1tf: Increase l1tf memory limit for Nehalem+
x86/spectre: Add missing family 6 check to microcode check
Pull CPU hotplug fix from Thomas Gleixner:
"Remove the stale skip_onerr member from the hotplug states"
* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu/hotplug: Remove skip_onerr field from cpuhp_step structure
Pull core fixes from Thomas Gleixner:
"A small set of updates for core code:
- Prevent tracing in functions which are called from trace patching
via stop_machine() to prevent executing half patched function trace
entries.
- Remove old GCC workarounds
- Remove pointless includes of notifier.h"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Remove workaround for unreachable warnings from old GCC
notifier: Remove notifier header file wherever not used
watchdog: Mark watchdog touch functions as notrace
Fix the section mismatch warning in arch/x86/mm/pti.c:
WARNING: vmlinux.o(.text+0x6972a): Section mismatch in reference from the function pti_clone_pgtable() to the function .init.text:pti_user_pagetable_walk_pte()
The function pti_clone_pgtable() references
the function __init pti_user_pagetable_walk_pte().
This is often because pti_clone_pgtable lacks a __init
annotation or the annotation of pti_user_pagetable_walk_pte is wrong.
FATAL: modpost: Section mismatches detected.
Fixes: 85900ea515 ("x86/pti: Map the vsyscall page if needed")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/43a6d6a3-d69d-5eda-da09-0b1c88215a2a@infradead.org
These are mostly fixes related to using ti-sysc interconnect target module
driver for accessing right register offsets for sgx and cpsw and for
no_console_suspend regression.
There is also a droid4 emmc fix where emmc may not get detected for some
models, and vibrator dts mismerge fix.
And we have a file permission fix for am335x-osd3358-sm-red.dts that
just got added. And we must tag RTC as system-power-controller for
am437x for PMIC to shut down during poweroff.
-----BEGIN PGP SIGNATURE-----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=CHc2
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.19/fixes-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Fixes for omap variants against v4.19-rc1
These are mostly fixes related to using ti-sysc interconnect target module
driver for accessing right register offsets for sgx and cpsw and for
no_console_suspend regression.
There is also a droid4 emmc fix where emmc may not get detected for some
models, and vibrator dts mismerge fix.
And we have a file permission fix for am335x-osd3358-sm-red.dts that
just got added. And we must tag RTC as system-power-controller for
am437x for PMIC to shut down during poweroff.
* tag 'omap-for-v4.19/fixes-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap4-droid4: Fix emmc errors seen on some devices
ARM: dts: Fix file permission for am335x-osd3358-sm-red.dts
arm: dts: am4372: setup rtc as system-power-controller
ARM: dts: omap4-droid4: fix vibrations on Droid 4
bus: ti-sysc: Fix no_console_suspend handling
bus: ti-sysc: Fix module register ioremap for larger offsets
ARM: OMAP2+: Fix module address for modules using mpu_rt_idx
ARM: OMAP2+: Fix null hwmod for ti-sysc debug
Signed-off-by: Olof Johansson <olof@lixom.net>
In the __getcpu function, lsl is using the wrong target and destination
registers. Luckily, the compiler tends to choose %eax for both variables,
so it has been working so far.
Fixes: a582c540ac ("x86/vdso: Use RDPID in preference to LSL when available")
Signed-off-by: Samuel Neves <sneves@dei.uc.pt>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180901201452.27828-1-sneves@dei.uc.pt
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iEYEABECAAYFAluKTH8ACgkQ+iyteGJfRspLOgCgybxs7ktaE4RFal8KM7X8g5sB
wVEAoMQ1IlQFkuxhJmHt8YemhRL3JqWC
=cMKd
-----END PGP SIGNATURE-----
Merge tag 'linux-watchdog-4.19-rc2' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog fixlet from Wim Van Sebroeck:
"Document support for r8a774a1"
* tag 'linux-watchdog-4.19-rc2' of git://www.linux-watchdog.org/linux-watchdog:
dt-bindings: watchdog: renesas-wdt: Document r8a774a1 support
frequency and the other to fix a bad allocation in the Nuvoton NPCM7XX
driver.
-----BEGIN PGP SIGNATURE-----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=b74w
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Two small fixes, one for the x86 Stoney SoC to get a more accurate clk
frequency and the other to fix a bad allocation in the Nuvoton NPCM7XX
driver"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: x86: Set default parent to 48Mhz
clk: npcm7xx: fix memory allocation
The trick with flipping bit 63 to avoid loading the address of the 1:1
mapping of the poisoned page while the 1:1 map is updated used to work when
unmapping the page. But it falls down horribly when attempting to directly
set the page as uncacheable.
The problem is that when the cache mode is changed to uncachable, the pages
needs to be flushed from the cache first. But the decoy address is
non-canonical due to bit 63 flipped, and the CLFLUSH instruction throws a
#GP fault.
Add code to change_page_attr_set_clr() to fix the address before calling
flush.
Fixes: 284ce4011b ("x86/memory_failure: Introduce {set, clear}_mce_nospec()")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Link: https://lkml.kernel.org/r/20180831165506.GA9605@agluck-desk
- Fix typos in SVE documentation
- Fix type-checking and implicit truncation for SMCCC calls
- Force CONFIG_HOLES_IN_ZONE=y so that SLAB doesn't fall over NOMAP regions
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCgAGBQJbiSyOAAoJELescNyEwWM0Jc4IAMV6UIPNnARqKESMMGI8CPW3
+b75RKJvOz06wIsd/ko+at+4SU4om/qr5k1Yx6F2s9t1y7+1RokkP1ZXOivsOegp
KBtbDEzvwYWuePdMtZmXMMLOIOVzLC2UlqVGqdEBLNxYqfdS6H7IwgPlaXpu1GIu
n4F0d6oEKY3hTmFrmH9FN68ZrTpx8S2MZYIApokhBrNIaSyr7x8bUj8/v9OoaJsO
TwlG0y7W252alGni97WnX6gw0eM0HQ6yg8h+zNVmwksjUY+ZCS3w4ib3H8sS2FBH
vzr3XkgEPeWR1oSYO7P7Vv7erMQUCnS+q7UjQ09TVvHTcXGb3A+iqP+w3rXMbyo=
=gy5J
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"A few arm64 fixes came in this week, specifically fixing some nasty
truncation of return values from firmware calls and resolving a
VM_BUG_ON due to accessing uninitialised struct pages corresponding to
NOMAP pages.
Summary:
- Fix typos in SVE documentation
- Fix type-checking and implicit truncation for SMCCC calls
- Force CONFIG_HOLES_IN_ZONE=y so that SLAB doesn't fall over NOMAP
regions"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: always enable CONFIG_HOLES_IN_ZONE
arm/arm64: smccc-1.1: Handle function result as parameters
arm/arm64: smccc-1.1: Make return values unsigned long
Documentation/arm64/sve: Couple of improvements and typos
When PTI is enabled on x86-32 the kernel uses the GDT mapped in the fixmap
for the simple reason that this address is also mapped for user-space.
The efi_call_phys_prolog()/efi_call_phys_epilog() wrappers change the GDT
to call EFI runtime services and switch back to the kernel GDT when they
return. But the switch-back uses the writable GDT, not the fixmap GDT.
When that happened and and the CPU returns to user-space it switches to the
user %cr3 and tries to restore user segment registers. This fails because
the writable GDT is not mapped in the user page-table, and without a GDT
the fault handlers also can't be launched. The result is a triple fault and
reboot of the machine.
Fix that by restoring the GDT back to the fixmap GDT which is also mapped
in the user page-table.
Fixes: 7757d607c6 x86/pti: ('Allow CONFIG_PAGE_TABLE_ISOLATION for x86_32')
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: hpa@zytor.com
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/1535702738-10971-1-git-send-email-joro@8bytes.org
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCW4lM6AAKCRCAXGG7T9hj
vs8AAQDysFccg97UdopW3B7yklIaRqkfEIAsxe65f191MXsH2AEAp5SKxZqRPqBP
a9WHDj8ShB3BhZ/IxpdO9Y59U3Jo4wA=
=Gt4c
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.19b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- minor cleanup avoiding a warning when building with new gcc
- a patch to add a new sysfs node for Xen frontend/backend drivers to
make it easier to obtain the state of a pv device
- two fixes for 32-bit pv-guests to avoid intermediate L1TF vulnerable
PTEs
* tag 'for-linus-4.19b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: remove redundant variable save_pud
xen: export device state to sysfs
x86/pae: use 64 bit atomic xchg function in native_ptep_get_and_clear
x86/xen: don't write ptes directly in 32-bit PV guests
- Fix wrong date and time on PMU-based Macs.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCW4lCFhUcZ2VlcnRAbGlu
dXgtbTY4ay5vcmcACgkQisJQ/WRJ8XButAD/Z+zyKOaFZQ28cYfAmhUMgi4LvICF
THHND3O321KT5WEA/1E1/SxqvH5juQCoaF7GdJGVIQ6E0w6WYgt8LC1WFWML
=J7Db
-----END PGP SIGNATURE-----
Merge tag 'm68k-for-v4.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k fix from Geert Uytterhoeven:
"Just a single fix for a bug introduced during the merge window: fix
wrong date and time on PMU-based Macs"
* tag 'm68k-for-v4.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k/mac: Use correct PMU response format
Pull i2c fixes from Wolfram Sang:
- regression fixes for i801 and designware
- better API and leak fix for releasing DMA safe buffers
- better greppable strings for the bitbang algorithm
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: sh_mobile: fix leak when using DMA bounce buffer
i2c: sh_mobile: define start_ch() void as it only returns 0 anyhow
i2c: refactor function to release a DMA safe buffer
i2c: algos: bit: make the error messages grepable
i2c: designware: Re-init controllers with pm_disabled set on resume
i2c: i801: Allow ACPI AML access I/O ports not reserved for SMBus
A NMI can hit in the middle of context switching or in the middle of
switch_mm_irqs_off(). In either case, CR3 might not match current->mm,
which could cause copy_from_user_nmi() and friends to read the wrong
memory.
Fix it by adding a new nmi_uaccess_okay() helper and checking it in
copy_from_user_nmi() and in __copy_from_user_nmi()'s callers.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Rik van Riel <riel@surriel.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/dd956eba16646fd0b15c3c0741269dfd84452dac.1535557289.git.luto@kernel.org
When bootstrapping an architecture, it's usual to generate the kernel's
user-space headers (make headers_install) before building a compiler. Move
the compiler check (for asm goto support) to the archprepare target so that
it is only done when building code for the target.
Fixes: e501ce957a ("x86: Force asm-goto")
Reported-by: Helmut Grohne <helmutg@debian.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180829194317.GA4765@decadent.org.uk
show_opcodes() is used both for dumping kernel instructions and for dumping
user instructions. If userspace causes #PF by jumping to a kernel address,
show_opcodes() can be reached with regs->ip controlled by the user,
pointing to kernel code. Make sure that userspace can't trick us into
dumping kernel memory into dmesg.
Fixes: 7cccf0725c ("x86/dumpstack: Add a show_ip() function")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: security@kernel.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180828154901.112726-1-jannh@google.com
In preparation to remove direct access to device_node.type, add
of_node_is_type() and of_node_get_device_type() helpers to check and
retrieve the device type.
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
When notifiers were there, `skip_onerr` was used to avoid calling
particular step startup/teardown callbacks in the CPU up/down rollback
path, which made the hotplug asymmetric.
As notifiers are gone now after the full state machine conversion, the
`skip_onerr` field is no longer required.
Remove it from the structure and its usage.
Signed-off-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1535439294-31426-1-git-send-email-mojha@codeaurora.org
