Settle on three "flavors" of uprobe/uretprobe, installed on different
kinds of instruction: nop, push, and ret. All three are testing
different internal code paths emulating or single-stepping instructions,
so are interesting to compare and benchmark separately.
To ensure `push rbp` instruction we ensure that uprobe_target_push() is
not a leaf function by calling (global __weak) noop function and
returning something afterwards (if we don't do that, compiler will just
do a tail call optimization).
Also, we need to make sure that compiler isn't skipping frame pointer
generation, so let's add `-fno-omit-frame-pointers` to Makefile.
Just to give an idea of where we currently stand in terms of relative
performance of different uprobe/uretprobe cases vs a cheap syscall
(getpgid()) baseline, here are results from my local machine:
$ benchs/run_bench_uprobes.sh
base : 1.561 ± 0.020M/s
uprobe-nop : 0.947 ± 0.007M/s
uprobe-push : 0.951 ± 0.004M/s
uprobe-ret : 0.443 ± 0.007M/s
uretprobe-nop : 0.471 ± 0.013M/s
uretprobe-push : 0.483 ± 0.004M/s
uretprobe-ret : 0.306 ± 0.007M/s
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240301214551.1686095-1-andrii@kernel.org
In the function btf__load_vmlinux_btf, the debug message incorrectly
refers to 'path' instead of 'sysfs_btf_path'.
Signed-off-by: Chen Shen <peterchenshen@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240302062218.3587-1-peterchenshen@gmail.com
This patch adds a new helper userspace_pm_get_addr() in mptcp_join.sh.
In it, parse the token value from the output of 'pm_nl_ctl events', then
pass it to pm_nl_ctl get_addr command. Use this helper in userspace pm
dump tests.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The command get_addr() of pm_nl_ctl can be used like this in in-kernel PM:
pm_nl_ctl get $id
This patch adds token argument for it to support userspace PM:
pm_nl_ctl get $id token $token
If 'token $token' is passed to get_addr(), copy it into the kernel netlink.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a new helper userspace_pm_dump() to dump addresses
for the userspace PM. Use this helper to check whether an ID 0 subflow
is listed in the output of dump command after creating an ID 0 subflow
in "userspace pm create id 0 subflow" test. Dump userspace PM addresses
list in "userspace pm add & remove address" test and in "userspace pm
create destroy subflow" test.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extract the main part of check() in pm_netlink.sh into a new helper
named mptcp_lib_check_output in mptcp_lib.sh.
This helper will be used for userspace dump addresses tests.
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The command dump_addr() of pm_nl_ctl can be used like this in in-kernel PM:
pm_nl_ctl dump
This patch adds token argument for it to support userspace PM:
pm_nl_ctl dump token $token
If 'token $token' is passed to dump_addr(), copy it into the kernel
netlink.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the address flag MPTCP_PM_ADDR_FLAG_SUBFLOW in csf() in
pm_nl_ctl.c when subflow is created by a userspace PM.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When creating a lot of listener sockets, it is enough to wait only for
the last one, like we are doing before in diag.sh for other subtests.
If we do a check for each listener sockets, each time listing all
available sockets, it can take a very long time in very slow
environments, at the point we can reach some timeout.
When using the debug kconfig, the waiting time switches from more than
8 sec to 0.1 sec on my side. In slow/busy environments, and with a poll
timeout set to 30 ms, the waiting time could go up to ~100 sec because
the listener socket would timeout and stop, while the script would still
be checking one by one if all sockets are ready. The result is that
after having waited for everything to be ready, all sockets have been
stopped due to a timeout, and it is too late for the script to check how
many there were.
While at it, also removed ss options we don't need: we only need the
filtering options, to count how many listener sockets have been created.
We don't need to ask ss to display internal TCP information, and the
memory if the output is dropped by the 'wc -l' command anyway.
Fixes: b4b51d36bb ("selftests: mptcp: explicitly trigger the listener diag code-path")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/r/20240301063754.2ecefecf@kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test counter 'test_cnt' should not be returned in diag.sh, e.g. what
if only the 4th test fail? Will do 'exit 4' which is 'exit ${KSFT_SKIP}',
the whole test will be marked as skipped instead of 'failed'!
So we should do ret=${KSFT_FAIL} instead.
Fixes: df62f2ec3d ("selftests/mptcp: add diag interface tests")
Cc: stable@vger.kernel.org
Fixes: 42fb6cddec ("selftests: mptcp: more stable diag tests")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The threads data structure is an array of hashmaps, previously
rbtrees. The two levels allows for a fixed outer array where access is
guarded by rw_semaphores. Commit 91e467bc56 ("perf machine: Use
hashtable for machine threads") sized the outer table at 256 entries
to avoid future scalability problems, however, this means the threads
struct is sized at 30,720 bytes. As the hashmaps allow O(1) access for
the common find/insert/remove operations, lower the number of entries
to 8. This reduces the size overhead to 960 bytes.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-8-irogers@google.com
The rbtree provides a sorting on entries but this is unused. Switch to
using hashmap for O(1) rather than O(log n) find/insert/remove
complexity.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-7-irogers@google.com
Move threads out of machine and into its own file.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-6-irogers@google.com
Move thread_rb_node into the machine.c file. This hides the
implementation of threads from the rest of the code allowing for it to
be refactored.
Locking discipline is tightened up in this change. As the lock is now
encapsulated in threads, the findnew function requires holding it (as
it already did in machine). Rather than do conditionals with locks
based on whether the thread should be created (which could potentially
be error prone with a read lock match with a write unlock), have a
separate threads__find that won't create the thread and only holds the
read lock. This effectively duplicates the findnew logic, with the
existing findnew logic only operating under a write lock assuming
creation is necessary as a previous find failed. The creation may
still fail with the write lock due to another thread. The duplication
is removed in a later next patch that delegates the implementation to
hashtable.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-5-irogers@google.com
Avoid exposing the threads data structure by switching to the callback
machine__for_each_thread approach. machine__fprintf is only used in
tests and verbose >3 output so don't turn to list and sort. Add
machine__threads_nr to be refactored later.
Note, all existing *_fprintf routines ignore fprintf errors.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-4-irogers@google.com
Commit 91e467bc56 ("perf machine: Use hashtable for machine
threads") made the iteration of thread tids unordered. The perf trace
--summary output sorts and prints each hash bucket, rather than all
threads globally. Change this behavior by turn all threads into a
list, sort the list by number of trace events then by tids, finally
print the list. This also allows the rbtree in threads to be not
accessed outside of machine.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-3-irogers@google.com
Commit 91e467bc56 ("perf machine: Use hashtable for machine
threads") made the iteration of thread tids unordered. The perf report
--tasks output now shows child threads in an order determined by the
hashing. For example, in this snippet tid 3 appears after tid 256 even
though they have the same ppid 2:
```
$ perf report --tasks
% pid tid ppid comm
0 0 -1 |swapper
2 2 0 | kthreadd
256 256 2 | kworker/12:1H-k
693761 693761 2 | kworker/10:1-mm
13017621301762 2 | kworker/1:1-mm_
1302530 1302530 2 | kworker/u32:0-k
3 3 2 | rcu_gp
...
```
The output is easier to read if threads appear numerically
increasing. To allow for this, read all threads into a list then sort
with a comparator that orders by the child task's of the first common
parent. The list creation and deletion are created as utilities on
machine. The indentation is possible by counting the number of
parents a child has.
With this change the output for the same data file is now like:
```
$ perf report --tasks
% pid tid ppid comm
0 0 -1 |swapper
1 1 0 | systemd
823 823 1 | systemd-journal
853 853 1 | systemd-udevd
3230 3230 1 | systemd-timesyn
3236 3236 1 | auditd
3239 3239 3236 | audisp-syslog
3321 3321 1 | accounts-daemon
...
```
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-2-irogers@google.com
L3PMCx0AC and L3PMCx0AD, used in l3_xi_sampled_latency* events, have a
quirk that requires them to be programmed with SliceId set to 0x3.
Without this, the events do not count at all and affects dependent
metrics such as l3_read_miss_latency.
If ThreadMask is not specified, the amd-uncore driver internally sets
ThreadMask to 0x3, EnAllCores to 0x1 and EnAllSlices to 0x1 but does
not set SliceId. Since SliceId must also be set to 0x3 in this case,
specify all the other fields explicitly.
E.g.
$ sudo perf stat -e l3_xi_sampled_latency.all,l3_xi_sampled_latency_requests.all -a sleep 1
Before:
Performance counter stats for 'system wide':
0 l3_xi_sampled_latency.all
0 l3_xi_sampled_latency_requests.all
1.005155399 seconds time elapsed
After:
Performance counter stats for 'system wide':
921,446 l3_xi_sampled_latency.all
54,210 l3_xi_sampled_latency_requests.all
1.005664472 seconds time elapsed
Fixes: 5b2ca349c3 ("perf vendor events amd: Add Zen 4 uncore events")
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: ananth.narayan@amd.com
Cc: ravi.bangoria@amd.com
Cc: eranian@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301084431.646221-1-sandipan.das@amd.com
This is useful for scripts that work with Perf and ETM trace. Rather
than them trying to parse Perf's error output at runtime to see if it
was linked or not.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: al.grant@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301133829.346286-1-james.clark@arm.com
- Fix IOMMU table initialisation when doing kdump over SR-IOV.
- Fix incorrect RTAS function name for resetting TCE tables.
- Fix fpu_signal selftest failures since a recent change.
Thanks to: Gaurav Batra, Nathan Lynch.
-----BEGIN PGP SIGNATURE-----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=MSDF
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix IOMMU table initialisation when doing kdump over SR-IOV
- Fix incorrect RTAS function name for resetting TCE tables
- Fix fpu_signal selftest failures since a recent change
Thanks to Gaurav Batra and Nathan Lynch.
* tag 'powerpc-6.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix fpu_signal failures
powerpc/rtas: use correct function name for resetting TCE tables
powerpc/pseries/iommu: IOMMU table is not initialized for kdump over SR-IOV
There's an almost identical code sequence to specify load/store access
hints in __copy_tofrom_user_power7(), copypage_power7() and
memcpy_power7().
Move the sequence into a common macro, which is passed the registers to
use as they differ slightly.
There also needs to be a copy in the selftests, it could be shared in
future if the headers are cleaned up / refactored.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240229122521.762431-1-mpe@ellerman.id.au
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZeEKVAAKCRDbK58LschI
g7oYAQD5Jlv4fIVTvxvfZrTTZ2tU+OsPa75mc8SDKwpash3YygEA8kvESy8+t6pg
D6QmSf1DIZdFoSp/bV+pfkNWMeR8gwg=
=mTAj
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-02-29
We've added 119 non-merge commits during the last 32 day(s) which contain
a total of 150 files changed, 3589 insertions(+), 995 deletions(-).
The main changes are:
1) Extend the BPF verifier to enable static subprog calls in spin lock
critical sections, from Kumar Kartikeya Dwivedi.
2) Fix confusing and incorrect inference of PTR_TO_CTX argument type
in BPF global subprogs, from Andrii Nakryiko.
3) Larger batch of riscv BPF JIT improvements and enabling inlining
of the bpf_kptr_xchg() for RV64, from Pu Lehui.
4) Allow skeleton users to change the values of the fields in struct_ops
maps at runtime, from Kui-Feng Lee.
5) Extend the verifier's capabilities of tracking scalars when they
are spilled to stack, especially when the spill or fill is narrowing,
from Maxim Mikityanskiy & Eduard Zingerman.
6) Various BPF selftest improvements to fix errors under gcc BPF backend,
from Jose E. Marchesi.
7) Avoid module loading failure when the module trying to register
a struct_ops has its BTF section stripped, from Geliang Tang.
8) Annotate all kfuncs in .BTF_ids section which eventually allows
for automatic kfunc prototype generation from bpftool, from Daniel Xu.
9) Several updates to the instruction-set.rst IETF standardization
document, from Dave Thaler.
10) Shrink the size of struct bpf_map resp. bpf_array,
from Alexei Starovoitov.
11) Initial small subset of BPF verifier prepwork for sleepable bpf_timer,
from Benjamin Tissoires.
12) Fix bpftool to be more portable to musl libc by using POSIX's
basename(), from Arnaldo Carvalho de Melo.
13) Add libbpf support to gcc in CORE macro definitions,
from Cupertino Miranda.
14) Remove a duplicate type check in perf_event_bpf_event,
from Florian Lehner.
15) Fix bpf_spin_{un,}lock BPF helpers to actually annotate them
with notrace correctly, from Yonghong Song.
16) Replace the deprecated bpf_lpm_trie_key 0-length array with flexible
array to fix build warnings, from Kees Cook.
17) Fix resolve_btfids cross-compilation to non host-native endianness,
from Viktor Malik.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (119 commits)
selftests/bpf: Test if shadow types work correctly.
bpftool: Add an example for struct_ops map and shadow type.
bpftool: Generated shadow variables for struct_ops maps.
libbpf: Convert st_ops->data to shadow type.
libbpf: Set btf_value_type_id of struct bpf_map for struct_ops.
bpf: Replace bpf_lpm_trie_key 0-length array with flexible array
bpf, arm64: use bpf_prog_pack for memory management
arm64: patching: implement text_poke API
bpf, arm64: support exceptions
arm64: stacktrace: Implement arch_bpf_stack_walk() for the BPF JIT
bpf: add is_async_callback_calling_insn() helper
bpf: introduce in_sleepable() helper
bpf: allow more maps in sleepable bpf programs
selftests/bpf: Test case for lacking CFI stub functions.
bpf: Check cfi_stubs before registering a struct_ops type.
bpf: Clarify batch lookup/lookup_and_delete semantics
bpf, docs: specify which BPF_ABS and BPF_IND fields were zero
bpf, docs: Fix typos in instruction-set.rst
selftests/bpf: update tcp_custom_syncookie to use scalar packet offset
bpf: Shrink size of struct bpf_map/bpf_array.
...
====================
Link: https://lore.kernel.org/r/20240301001625.8800-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
My recent commit e5d00aaac6 ("selftests/powerpc: Check all FPRs in
fpu_preempt") inadvertently broke the fpu_signal test.
It needs to take into account that fpu_preempt now loads 32 FPRs, so
enlarge darray.
Also use the newly added randomise_darray() to properly randomise darray.
Finally the checking done in signal_fpu_sig() needs to skip checking
f30/f31, because they are used as scratch registers in check_all_fprs(),
called by preempt_fpu(), and so could hold other values when the signal
is taken.
Fixes: e5d00aaac6 ("selftests/powerpc: Check all FPRs in fpu_preempt")
Reported-by: Spoorthy <spoorthy@linux.ibm.com>
Depends-on: 2ba107f679 ("selftests/powerpc: Generate better bit patterns for FPU tests")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240301101035.1230024-1-mpe@ellerman.id.au
I cleared IFF_NOARP flag from netdevsim dev->flags in order to support
skb forwarding. This breaks the rtnetlink.sh selftest
kci_test_ipsec_offload() test because ipsec does not connect to peers it
cannot transmit to.
Fix the issue by adding a neigh entry manually. ipsec_offload test now
successfully pass.
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Connect two netdevsim ports in different namespaces together, then send
packets between them using socat.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Maciek Machnikowski <maciek@machnikowski.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
SCTP does not support IP_LOCAL_PORT_RANGE and we know it,
so use XFAIL instead of SKIP.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently some tests report skip for things they expect to fail
e.g. when given combination of parameters is known to be unsupported.
This is confusing because in an ideal test environment and fully
featured kernel no tests should be skipped.
Selftest summary line already includes xfail and xpass counters,
e.g.:
Totals: pass:725 fail:0 xfail:0 xpass:0 skip:0 error:0
but there's no way to use it from within the harness.
Add a new per-fixture+variant combination list of test cases
we expect to fail.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Switch to printing KTAP line for PASS / FAIL with ksft_test_result_code(),
this gives us the ability to report diagnostic messages.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to the spec we should always print a # if we add
a diagnostic message. Having the caller pass in the new line
as part of diagnostic message makes handling this a bit
counter-intuitive, so append the new line in the helper.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub points out that for parsers it's rather useful to always
have the test name on the result line. Currently if we SKIP
(or soon XFAIL or XPASS), we will print:
ok 17 # SKIP SCTP doesn't support IP_BIND_ADDRESS_NO_PORT
^
no test name
Always print the test name.
KTAP format seems to allow or even call for it, per:
https://docs.kernel.org/dev-tools/ktap.html
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/all/87jzn6lnou.fsf@cloudflare.com/
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
For generic test harness code it's more useful to deal with exit
codes directly, rather than having to switch on them and call
the right ksft_test_result_*() helper. Add such function to kselftest.h.
Note that "directive" and "diagnostic" are what ktap docs call
those parts of the message.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We always use skip in combination with exit_code being 0
(KSFT_PASS). This are basic KSFT / KTAP semantics.
Store the right KSFT_* code in exit_code directly.
This makes it easier to support tests reporting other
extended KSFT_* codes like XFAIL / XPASS.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of tracking passed = 0/1 rename the field to exit_code
and invert the values so that they match the KSFT_* exit codes.
This will allow us to fold SKIP / XFAIL into the same value.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since we added variant support generating full test case
name takes 4 string arguments. We're about to need it
in another two places. Stop the duplication and print
once into a temporary buffer.
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we no longer need low exit codes to communicate
assertion steps - use normal KSFT exit codes.
Acked-by: Kees Cook <keescook@chromium.org>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace Landlock-specific TEST_F_FORK() with an improved TEST_F() which
brings four related changes:
Run TEST_F()'s tests in a grandchild process to make it possible to
drop privileges and delegate teardown to the parent.
Compared to TEST_F_FORK(), simplify handling of the test grandchild
process thanks to vfork(2), and makes it generic (e.g. no explicit
conversion between exit code and _metadata).
Compared to TEST_F_FORK(), run teardown even when tests failed with an
assert thanks to commit 63e6b2a423 ("selftests/harness: Run TEARDOWN
for ASSERT failures").
Simplify the test harness code by removing the no_print and step fields
which are not used. I added this feature just after I made
kselftest_harness.h more broadly available but this step counter
remained even though it wasn't needed after all. See commit 369130b631
("selftests: Enhance kselftest_harness.h to print which assert failed").
Replace spaces with tabs in one line of __TEST_F_IMPL().
Cc: Günther Noack <gnoack@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Will Drewry <wad@chromium.org>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This has the effect of creating a new test process for either TEST_F()
or TEST_F_FORK(), which doesn't change tests but will ease potential
backports. See next commit for the TEST_F_FORK() merge into TEST_F().
Cc: Günther Noack <gnoack@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Will Drewry <wad@chromium.org>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If SAVE and RESTORE unwind hints are in different basic blocks, and
objtool sees the RESTORE before the SAVE, it errors out with:
vmlinux.o: warning: objtool: vmw_port_hb_in+0x242: objtool isn't smart enough to handle this CFI save/restore combo
In such a case, defer following the RESTORE block until the
straight-line path gets followed later.
Fixes: 8faea26e61 ("objtool: Re-add UNWIND_HINT_{SAVE_RESTORE}")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402240702.zJFNmahW-lkp@intel.com/
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20240227073527.avcm5naavbv3cj5s@treble
Signed-off-by: Kees Cook <keescook@chromium.org>
The find will get the map, ensure puts are done on all paths.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240229062048.558799-1-irogers@google.com
Change the values of fields, including scalar types and function pointers,
and check if the struct_ops map works as expected.
The test changes the field "test_2" of "testmod_1" from the pointer to
test_2() to pointer to test_3() and the field "data" to 13. The function
test_2() and test_3() both compute a new value for "test_2_result", but in
different way. By checking the value of "test_2_result", it ensures the
struct_ops map works as expected with changes through shadow types.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240229064523.2091270-6-thinker.li@gmail.com
The example in bpftool-gen.8 explains how to use the pointer of the shadow
type to change the value of a field of a struct_ops map.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20240229064523.2091270-5-thinker.li@gmail.com
Declares and defines a pointer of the shadow type for each struct_ops map.
The code generator will create an anonymous struct type as the shadow type
for each struct_ops map. The shadow type is translated from the original
struct type of the map. The user of the skeleton use pointers of them to
access the values of struct_ops maps.
However, shadow types only supports certain types of fields, including
scalar types and function pointers. Any fields of unsupported types are
translated into an array of characters to occupy the space of the original
field. Function pointers are translated into pointers of the struct
bpf_program. Additionally, padding fields are generated to occupy the space
between two consecutive fields.
The pointers of shadow types of struct_osp maps are initialized when
*__open_opts() in skeletons are called. For a map called FOO, the user can
access it through the pointer at skel->struct_ops.FOO.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20240229064523.2091270-4-thinker.li@gmail.com
Convert st_ops->data to the shadow type of the struct_ops map. The shadow
type of a struct_ops type is a variant of the original struct type
providing a way to access/change the values in the maps of the struct_ops
type.
bpf_map__initial_value() will return st_ops->data for struct_ops types. The
skeleton is going to use it as the pointer to the shadow type of the
original struct type.
One of the main differences between the original struct type and the shadow
type is that all function pointers of the shadow type are converted to
pointers of struct bpf_program. Users can replace these bpf_program
pointers with other BPF programs. The st_ops->progs[] will be updated
before updating the value of a map to reflect the changes made by users.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240229064523.2091270-3-thinker.li@gmail.com
For a struct_ops map, btf_value_type_id is the type ID of it's struct
type. This value is required by bpftool to generate skeleton including
pointers of shadow types. The code generator gets the type ID from
bpf_map__btf_value_type_id() in order to get the type information of the
struct type of a map.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240229064523.2091270-2-thinker.li@gmail.com
Parallel testing appears to show a race between allocating and setting
evsel ids. As there is a bounds check on the xyarray it yields a segv
like:
```
AddressSanitizer:DEADLYSIGNAL
=================================================================
==484408==ERROR: AddressSanitizer: SEGV on unknown address 0x000000000010
==484408==The signal is caused by a WRITE memory access.
==484408==Hint: address points to the zero page.
#0 0x55cef5d4eff4 in perf_evlist__id_hash tools/lib/perf/evlist.c:256
#1 0x55cef5d4f132 in perf_evlist__id_add tools/lib/perf/evlist.c:274
#2 0x55cef5d4f545 in perf_evlist__id_add_fd tools/lib/perf/evlist.c:315
#3 0x55cef5a1923f in store_evsel_ids util/evsel.c:3130
#4 0x55cef5a19400 in evsel__store_ids util/evsel.c:3147
#5 0x55cef5888204 in __run_perf_stat tools/perf/builtin-stat.c:832
#6 0x55cef5888c06 in run_perf_stat tools/perf/builtin-stat.c:960
#7 0x55cef58932db in cmd_stat tools/perf/builtin-stat.c:2878
...
```
Avoid this crash by early exiting the perf_evlist__id_add_fd and
perf_evlist__id_add is the access is out-of-bounds.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240229070757.796244-1-irogers@google.com
Currently it accounts the contention using delta between timestamps in
lock:contention_begin and lock:contention_end tracepoints. But it means
the lock should see the both events during the monitoring period.
Actually there are 4 cases that happen with the monitoring:
monitoring period
/ \
| |
1: B------+-----------------------+--------E
2: B----+-------------E |
3: | B-----------+----E
4: | B-------------E |
| |
t0 t1
where B and E mean contention BEGIN and END, respectively. So it only
accounts the case 4 for now. It seems there's no way to handle the case
1. The case 2 might be handled if it saved the timestamp (t0), but it
lacks the information from the B notably the flags which shows the lock
types. Also it could be a nested lock which it currently ignores. So
I think we should ignore the case 2.
However we can handle the case 3 if we save the timestamp (t1) at the
end of the period. And then it can iterate the map entries in the
userspace and update the lock stat accordinly.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviwed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20240228053335.312776-1-namhyung@kernel.org
Replace deprecated 0-length array in struct bpf_lpm_trie_key with
flexible array. Found with GCC 13:
../kernel/bpf/lpm_trie.c:207:51: warning: array subscript i is outside array bounds of 'const __u8[0]' {aka 'const unsigned char[]'} [-Warray-bounds=]
207 | *(__be16 *)&key->data[i]);
| ^~~~~~~~~~~~~
../include/uapi/linux/swab.h:102:54: note: in definition of macro '__swab16'
102 | #define __swab16(x) (__u16)__builtin_bswap16((__u16)(x))
| ^
../include/linux/byteorder/generic.h:97:21: note: in expansion of macro '__be16_to_cpu'
97 | #define be16_to_cpu __be16_to_cpu
| ^~~~~~~~~~~~~
../kernel/bpf/lpm_trie.c:206:28: note: in expansion of macro 'be16_to_cpu'
206 | u16 diff = be16_to_cpu(*(__be16 *)&node->data[i]
^
| ^~~~~~~~~~~
In file included from ../include/linux/bpf.h:7:
../include/uapi/linux/bpf.h:82:17: note: while referencing 'data'
82 | __u8 data[0]; /* Arbitrary size */
| ^~~~
And found at run-time under CONFIG_FORTIFY_SOURCE:
UBSAN: array-index-out-of-bounds in kernel/bpf/lpm_trie.c:218:49
index 0 is out of range for type '__u8 [*]'
Changing struct bpf_lpm_trie_key is difficult since has been used by
userspace. For example, in Cilium:
struct egress_gw_policy_key {
struct bpf_lpm_trie_key lpm_key;
__u32 saddr;
__u32 daddr;
};
While direct references to the "data" member haven't been found, there
are static initializers what include the final member. For example,
the "{}" here:
struct egress_gw_policy_key in_key = {
.lpm_key = { 32 + 24, {} },
.saddr = CLIENT_IP,
.daddr = EXTERNAL_SVC_IP & 0Xffffff,
};
To avoid the build time and run time warnings seen with a 0-sized
trailing array for struct bpf_lpm_trie_key, introduce a new struct
that correctly uses a flexible array for the trailing bytes,
struct bpf_lpm_trie_key_u8. As part of this, include the "header"
portion (which is just the "prefixlen" member), so it can be used
by anything building a bpf_lpr_trie_key that has trailing members that
aren't a u8 flexible array (like the self-test[1]), which is named
struct bpf_lpm_trie_key_hdr.
Unfortunately, C++ refuses to parse the __struct_group() helper, so
it is not possible to define struct bpf_lpm_trie_key_hdr directly in
struct bpf_lpm_trie_key_u8, so we must open-code the union directly.
Adjust the kernel code to use struct bpf_lpm_trie_key_u8 through-out,
and for the selftest to use struct bpf_lpm_trie_key_hdr. Add a comment
to the UAPI header directing folks to the two new options.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Closes: https://paste.debian.net/hidden/ca500597/
Link: https://lore.kernel.org/all/202206281009.4332AA33@keescook/ [1]
Link: https://lore.kernel.org/bpf/20240222155612.it.533-kees@kernel.org
A metric may have no events, for example, the transaction metrics on
x86 are dependent on there being TSX events. Fix a segv where an evsel
of NULL is dereferenced for a metric leader value.
Fixes: a59fb796a3 ("perf metrics: Compute unmerged uncore metrics individually")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240224011420.3066322-2-irogers@google.com
The metric match function fails for cases like looking for "metric" in
the string "all;foo_metric;metric" as the "metric" in "foo_metric"
matches but isn't preceeded by a ';'. Fix this by matching the first
list item and recursively matching on failure the next item after a
semicolon.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240224011420.3066322-1-irogers@google.com
In preparation for KUnit testing and further improvements in fortify
failure reporting, split out the report and encode the function and access
failure (read or write overflow) into a single u8 argument. This mainly
ends up saving a tiny bit of space in the data segment. For a defconfig
with FORTIFY_SOURCE enabled:
$ size gcc/vmlinux.before gcc/vmlinux.after
text data bss dec hex filename
26132309 9760658 2195460 38088427 2452eeb gcc/vmlinux.before
26132386 9748382 2195460 38076228 244ff44 gcc/vmlinux.after
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
We have one outstanding issue with the stmmac driver, which may
be a LOCKDEP false positive, not a blocker.
Current release - regressions:
- netfilter: nf_tables: re-allow NFPROTO_INET in
nft_(match/target)_validate()
- eth: ionic: fix error handling in PCI reset code
Current release - new code bugs:
- eth: stmmac: complete meta data only when enabled, fix null-deref
- kunit: fix again checksum tests on big endian CPUs
Previous releases - regressions:
- veth: try harder when allocating queue memory
- Bluetooth:
- hci_bcm4377: do not mark valid bd_addr as invalid
- hci_event: fix handling of HCI_EV_IO_CAPA_REQUEST
Previous releases - always broken:
- info leak in __skb_datagram_iter() on netlink socket
- mptcp:
- map v4 address to v6 when destroying subflow
- fix potential wake-up event loss due to sndbuf auto-tuning
- fix double-free on socket dismantle
- wifi: nl80211: reject iftype change with mesh ID change
- fix small out-of-bound read when validating netlink be16/32 types
- rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
- ipv6: fix potential "struct net" ref-leak in inet6_rtm_getaddr()
- ip_tunnel: prevent perpetual headroom growth with huge number of
tunnels on top of each other
- mctp: fix skb leaks on error paths of mctp_local_output()
- eth: ice: fixes for DPLL state reporting
- dpll: rely on rcu for netdev_dpll_pin() to prevent UaF
- eth: dpaa: accept phy-interface-type = "10gbase-r" in the device tree
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=T2ty
-----END PGP SIGNATURE-----
Merge tag 'net-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, WiFi and netfilter.
We have one outstanding issue with the stmmac driver, which may be a
LOCKDEP false positive, not a blocker.
Current release - regressions:
- netfilter: nf_tables: re-allow NFPROTO_INET in
nft_(match/target)_validate()
- eth: ionic: fix error handling in PCI reset code
Current release - new code bugs:
- eth: stmmac: complete meta data only when enabled, fix null-deref
- kunit: fix again checksum tests on big endian CPUs
Previous releases - regressions:
- veth: try harder when allocating queue memory
- Bluetooth:
- hci_bcm4377: do not mark valid bd_addr as invalid
- hci_event: fix handling of HCI_EV_IO_CAPA_REQUEST
Previous releases - always broken:
- info leak in __skb_datagram_iter() on netlink socket
- mptcp:
- map v4 address to v6 when destroying subflow
- fix potential wake-up event loss due to sndbuf auto-tuning
- fix double-free on socket dismantle
- wifi: nl80211: reject iftype change with mesh ID change
- fix small out-of-bound read when validating netlink be16/32 types
- rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
- ipv6: fix potential "struct net" ref-leak in inet6_rtm_getaddr()
- ip_tunnel: prevent perpetual headroom growth with huge number of
tunnels on top of each other
- mctp: fix skb leaks on error paths of mctp_local_output()
- eth: ice: fixes for DPLL state reporting
- dpll: rely on rcu for netdev_dpll_pin() to prevent UaF
- eth: dpaa: accept phy-interface-type = '10gbase-r' in the device
tree"
* tag 'net-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
dpll: fix build failure due to rcu_dereference_check() on unknown type
kunit: Fix again checksum tests on big endian CPUs
tls: fix use-after-free on failed backlog decryption
tls: separate no-async decryption request handling from async
tls: fix peeking with sync+async decryption
tls: decrement decrypt_pending if no async completion will be called
gtp: fix use-after-free and null-ptr-deref in gtp_newlink()
net: hsr: Use correct offset for HSR TLV values in supervisory HSR frames
igb: extend PTP timestamp adjustments to i211
rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
tools: ynl: fix handling of multiple mcast groups
selftests: netfilter: add bridge conntrack + multicast test case
netfilter: bridge: confirm multicast packets before passing them up the stack
netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()
Bluetooth: qca: Fix triggering coredump implementation
Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT
Bluetooth: qca: Fix wrong event type for patch config command
Bluetooth: Enforce validation on max value of connection interval
Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
Bluetooth: mgmt: Fix limited discoverable off timeout
...
-----BEGIN PGP SIGNATURE-----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=2BRo
-----END PGP SIGNATURE-----
Merge tag 'nf-24-02-29' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
Patch #1 restores NFPROTO_INET with nft_compat, from Ignat Korchagin.
Patch #2 fixes an issue with bridge netfilter and broadcast/multicast
packets.
There is a day 0 bug in br_netfilter when used with connection tracking.
Conntrack assumes that an nf_conn structure that is not yet added to
hash table ("unconfirmed"), is only visible by the current cpu that is
processing the sk_buff.
For bridge this isn't true, sk_buff can get cloned in between, and
clones can be processed in parallel on different cpu.
This patch disables NAT and conntrack helpers for multicast packets.
Patch #3 adds a selftest to cover for the br_netfilter bug.
netfilter pull request 24-02-29
* tag 'nf-24-02-29' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: add bridge conntrack + multicast test case
netfilter: bridge: confirm multicast packets before passing them up the stack
netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()
====================
Link: https://lore.kernel.org/r/20240229000135.8780-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
vpmu_counter_access's disable_counter() carries a bug that disables
all the counters that are enabled, instead of just the requested one.
Fortunately, it's not an issue as there are no callers of it. Hence,
instead of fixing it, remove the definition entirely.
Remove enable_counter() as it's unused as well.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20231122221526.2750966-1-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Rename some test cases to avoid overlapping test names which is
problematic for the kernel test robot. No changes in the test's logic.
Suggested-by: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240227170418.491442-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend sev_smoke_test to also run a minimal SEV-ES smoke test so that it's
possible to test KVM's unique VMRUN=>#VMEXIT path for SEV-ES guests
without needing a full blown SEV-ES capable VM, which requires a rather
absurd amount of properly configured collateral.
Punt on proper GHCB and ucall support, and instead use the GHCB MSR
protocol to signal test completion. The most important thing at this
point is to have _any_ kind of testing of KVM's __svm_sev_es_vcpu_run().
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Peter Gonda <pgonda@google.com>
Cc: Carlos Bilbao <carlos.bilbao@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a basic smoke test for SEV guests to verify that KVM can launch an
SEV guest and run a few instructions without exploding. To verify that
SEV is indeed enabled, assert that SEV is reported as enabled in
MSR_AMD64_SEV, a.k.a. SEV_STATUS, which cannot be intercepted by KVM
(architecturally enforced).
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerly Tng <ackerleytng@google.com>
cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Suggested-by: Michael Roth <michael.roth@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
[sean: rename to "sev_smoke_test"]
Link: https://lore.kernel.org/r/20240223004258.3104051-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Port the existing intra-host SEV(-ES) migration test to the recently added
SEV library, which handles much of the boilerplate needed to create and
configure SEV guests.
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a library/APIs for creating and interfacing with SEV guests, all of
which need some amount of common functionality, e.g. an open file handle
for the SEV driver (/dev/sev), ioctl() wrappers to pass said file handle
to KVM, tracking of the C-bit, etc.
Add an x86-specific hook to initialize address properties, a.k.a. the
location of the C-bit. An arch specific hook is rather gross, but x86
already has a dedicated #ifdef-protected kvm_get_cpu_address_width() hook,
i.e. the ugliest code already exists.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerly Tng <ackerleytng@google.com>
cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Originally-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add support for tagging and untagging guest physical address, e.g. to
allow x86's SEV and TDX guests to embed shared vs. private information in
the GPA. SEV (encryption, a.k.a. C-bit) and TDX (shared, a.k.a. S-bit)
steal bits from the guest's physical address space that is consumed by the
CPU metadata, i.e. effectively aliases the "real" GPA.
Implement generic "tagging" so that the shared vs. private metadata can be
managed by x86 without bleeding too many details into common code.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerly Tng <ackerleytng@google.com>
cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Originally-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
To stick to libmnl wrappers in the past we had to use poll()
to check if there are any outstanding notifications on the socket.
This is no longer necessary, we can use MSG_DONTWAIT.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-16-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most libmnl socket helpers can be replaced by direct calls to
the underlying libc API. We need portid, the netlink manpage
suggests we bind() address of zero.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-14-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All YNL parsing callbacks take struct ynl_parse_arg as the argument.
Make that official by using a local callback type instead of mnl_cb_t.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-12-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There's only one set of callbacks in YNL, for netlink control
messages, and most of them are trivial. So implement the message
walking directly without depending on mnl_cb_run2().
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ynl_recv_ack() is simple and it's the only user of mnl_cb_run().
Now that ynl_sock_read_msgs() exists it's actually less code
to use ynl_sock_read_msgs() instead of being special.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All callers to mnl_cb_run2() call mnl_socket_recvfrom() right before.
Wrap the two in a helper, take typed arguments (struct ynl_parse_arg),
instead of hoping that all callers remember that parser error handling
requires yarg.
In case of ynl_sock_read_family() we will no longer check for kernel
returning no data, but that would be a kernel bug, not worth complicating
the code to catch this. Calling mnl_cb_run2() on an empty buffer
is legal and results in STOP (1).
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit f2ba1e5e22 ("tools: ynl-gen: stop generating common notification handlers")
removed the last caller of the parse_cb_run() helper.
We no longer need to export ynl_cb_array.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All YNL parsing code expects a pointer to struct ynl_parse_arg AKA yarg.
For dump was pass in struct ynl_dump_state, which works fine, because
struct ynl_dump_state and struct ynl_parse_arg have identical layout
for the members that matter.. but it's a bit hacky.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create helpers for accessing payloads of struct nlmsg.
Use them instead of the libmnl ones.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Don't use mnl attr helpers, we're trying to remove the libmnl
dependency. Create both signed and unsigned helpers, libmnl
had unsigned helpers, so code generator no longer needs
the mnl_type() hack.
The new helpers are written from first principles, but are
hopefully not too buggy.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The temporary auto-int helpers are not really correct.
We can't treat signed and unsigned ints the same when
determining whether we need full 8B. I realized this
before sending the patch to add support in libmnl.
Unfortunately, that patch has not been merged,
so time to fix our local helpers. Use the mnl* name
for now, subsequent patches will address that.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We never increment the group number iterator, so all groups
get recorded into index 0 of the mcast_groups[] array.
As a result YNL can only handle using the last group.
For example using the "netdev" sample on kernel with
page pool commands results in:
$ ./samples/netdev
YNL: Multicast group 'mgmt' not found
Most families have only one multicast group, so this hasn't
been noticed. Plus perhaps developers usually test the last
group which would have worked.
Fixes: 86878f14d7 ("tools: ynl: user space helpers")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240226214019.1255242-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 7c59c9c8f2 ("tools: ynl: generate code for ovs families")
we need relatively recent OvS headers to get YNL to compile.
Add the direct include workaround to fix compilation on less
up-to-date OSes like CentOS 9.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240226225806.1301152-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add test case for multicast packet confirm race.
Without preceding patch, this should result in:
WARNING: CPU: 0 PID: 38 at net/netfilter/nf_conntrack_core.c:1198 __nf_conntrack_confirm+0x3ed/0x5f0
Workqueue: events_unbound macvlan_process_broadcast
RIP: 0010:__nf_conntrack_confirm+0x3ed/0x5f0
? __nf_conntrack_confirm+0x3ed/0x5f0
nf_confirm+0x2ad/0x2d0
nf_hook_slow+0x36/0xd0
ip_local_deliver+0xce/0x110
__netif_receive_skb_one_core+0x4f/0x70
process_backlog+0x8c/0x130
[..]
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Allocate the common ucall pool using vm_vaddr_alloc_shared() so that the
ucall structures will be placed in shared (unencrypted) memory for VMs
with support for protected (encrypted) memory, e.g. x86's SEV.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerly Tng <ackerleytng@google.com>
cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
[sean: massage changelog]
Link: https://lore.kernel.org/r/20240223004258.3104051-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Test programs may wish to allocate shared vaddrs for things like
sharing memory with the guest. Since protected vms will have their
memory encrypted by default an interface is needed to explicitly
request shared pages.
Implement this by splitting the common code out from vm_vaddr_alloc()
and introducing a new vm_vaddr_alloc_shared().
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerly Tng <ackerleytng@google.com>
cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Reviewed-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add support for differentiating between protected (a.k.a. private, a.k.a.
encrypted) memory and normal (a.k.a. shared) memory for VMs that support
protected guest memory, e.g. x86's SEV. Provide and manage a common
bitmap for tracking whether a given physical page resides in protected
memory, as support for protected memory isn't x86 specific, i.e. adding a
arch hook would be a net negative now, and in the future.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerley Tng <ackerleytng@google.com>
cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Reviewed-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Originally-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add sparsebit_for_each_set_range() to allow iterator over a range of set
bits in a range. This will be used by x86 SEV guests to process protected
physical pages (each such page needs to be encrypted _after_ being "added"
to the VM).
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Signed-off-by: Ackerley Tng <ackerleytng@google.com>
[sean: split to separate patch]
Link: https://lore.kernel.org/r/20240223004258.3104051-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Make all sparsebit struct pointers "const" where appropriate. This will
allow adding a bitmap to track protected/encrypted physical memory that
tests can access in a read-only fashion.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerley Tng <ackerleytng@google.com>
Cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
[sean: massage changelog]
Link: https://lore.kernel.org/r/20240223004258.3104051-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Carve out space in the @shape passed to the various VM creation helpers to
allow using the shape to control the subtype of VM, e.g. to identify x86's
SEV VMs (which are "regular" VMs as far as KVM is concerned).
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerley Tng <ackerleytng@google.com>
Cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use the kselftest_harness.h interface in this test to get TAP
output, so that it is easier for the user to see what the test
is doing.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20240208204844.119326-9-thuth@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use the kvm_test_harness.h interface in this test to get TAP
output, so that it is easier for the user to see what the test
is doing.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20240208204844.119326-8-thuth@redhat.com
[sean: make host_cap static]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use the kvm_test_harness.h interface in this test to get TAP
output, so that it is easier for the user to see what the test
is doing.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20240208204844.119326-7-thuth@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The sync_regs test currently does not have any output (unless one
of the TEST_ASSERT statement fails), so it's hard to say for a user
whether a certain new sub-test has been included in the binary or
not. Let's make this a little bit more user-friendly and include
some TAP output via the kselftest_harness.h / kvm_test_harness.h
interface.
To be able to use the interface, we have to break up the huge main()
function here in more fine grained parts - then we can use the new
KVM_ONE_VCPU_TEST() macro to define the individual tests. Since these
are run with a separate VM now, we have also to make sure to create
the expected state at the beginning of each test, so some parts grow
a little bit - which should be OK considering that the individual
tests are more self-contained now.
Suggested-by: David Matlack <dmatlack@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20240208204844.119326-6-thuth@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Most tests are currently not giving any proper output for the user
to see how much sub-tests have already been run, or whether new
sub-tests are part of a binary or not. So it would be good to
support TAP output in the KVM selftests. There is already a nice
framework for this in the kselftest_harness.h header which we can
use. But since we also need a vcpu in most KVM selftests, it also
makes sense to introduce our own wrapper around this which takes
care of creating a VM with one vcpu, so we don't have to repeat
this boilerplate in each and every test. Thus let's introduce
a KVM_ONE_VCPU_TEST() macro here which takes care of this.
Suggested-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/all/Y2v+B3xxYKJSM%2FfH@google.com/
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20240208204844.119326-5-thuth@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extract the code to set a vCPU's entry point out of vm_arch_vcpu_add() and
into a new API, vcpu_arch_set_entry_point(). Providing a separate API
will allow creating a KVM selftests hardness that can handle tests that
use different entry points for sub-tests, whereas *requiring* the entry
point to be specified at vCPU creation makes it difficult to create a
generic harness, e.g. the boilerplate setup/teardown can't easily create
and destroy the VM and vCPUs.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20240208204844.119326-4-thuth@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The directory itself doesn't need have path handling, since it's only to
mean where is the directory that contains modules to be built.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
By checking if KDIR is a valid directory we can safely skip the tests if
kernel-devel isn't installed (default value of KDIR), or if KDIR
variable passed doesn't exists.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402191417.XULH88Ct-lkp@intel.com/
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Ignore the binary used to test livepatching a syscall.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The prologue generation code has been modified to make the callback
program use the stack of the program marked as exception boundary where
callee-saved registers are already pushed.
As the bpf_throw function never returns, if it clobbers any callee-saved
registers, they would remain clobbered. So, the prologue of the
exception-boundary program is modified to push R23 and R24 as well,
which the callback will then recover in its epilogue.
The Procedure Call Standard for the Arm 64-bit Architecture[1] states
that registers r19 to r28 should be saved by the callee. BPF programs on
ARM64 already save all callee-saved registers except r23 and r24. This
patch adds an instruction in prologue of the program to save these
two registers and another instruction in the epilogue to recover them.
These extra instructions are only added if bpf_throw() is used. Otherwise
the emitted prologue/epilogue remains unchanged.
[1] https://github.com/ARM-software/abi-aa/blob/main/aapcs64/aapcs64.rst
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20240201125225.72796-3-puranjay12@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
As for the Qemu command, print the command used to run tests with UML.
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Gow <davidgow@google.com>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit 6151ff9c75 ("selftests: netdevsim: use suitable existing dummy
file for flash test") introduced a nice trick to the devlink flashing
test. Instead of user having to create a file under /lib/firmware
we just pick the first one that already exists.
Sadly, in AWS Linux there are no files directly under /lib/firmware,
only in subdirectories. Don't limit the search to -maxdepth 1.
We can use the %P print format to get the correct path for files
inside subdirectories:
$ find /lib/firmware -type f -printf '%P\n' | head -1
intel-ucode/06-1a-05
The full path is /lib/firmware/intel-ucode/06-1a-05
This works in GNU find, busybox doesn't have printf at all,
so we're not making it worse.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240224050658.930272-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add the SECURITY_LANDLOCK_KUNIT_TEST option to enable KUnit tests for
Landlock. The minimal required configuration is listed in the
security/landlock/.kunitconfig file.
Add an initial landlock_fs KUnit test suite with 7 test cases for
filesystem helpers. These are related to the LANDLOCK_ACCESS_FS_REFER
right.
There is one KUnit test case per:
* mutated state (e.g. test_scope_to_request_*) or,
* shared state between tests (e.g. test_is_eaccess_*).
Add macros to improve readability of tests (i.e. one per line). Test
cases are collocated with the tested functions to help maintenance and
improve documentation. This is why SECURITY_LANDLOCK_KUNIT_TEST cannot
be set as module.
This is a nice complement to Landlock's user space kselftests. We
expect new Landlock features to come with KUnit tests as well.
Thanks to UML support, we can run all KUnit tests for Landlock with:
./tools/testing/kunit/kunit.py run --kunitconfig security/landlock
[00:00:00] ======================= landlock_fs =======================
[00:00:00] [PASSED] test_no_more_access
[00:00:00] [PASSED] test_scope_to_request_with_exec_none
[00:00:00] [PASSED] test_scope_to_request_with_exec_some
[00:00:00] [PASSED] test_scope_to_request_without_access
[00:00:00] [PASSED] test_is_eacces_with_none
[00:00:00] [PASSED] test_is_eacces_with_refer
[00:00:00] [PASSED] test_is_eacces_with_write
[00:00:00] =================== [PASSED] landlock_fs ===================
[00:00:00] ============================================================
[00:00:00] Testing complete. Ran 7 tests: passed: 7
Cc: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Reviewed-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20240118113632.1948478-1-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Even if it is set to 100ms from the beginning with commit
df62f2ec3d ("selftests/mptcp: add diag interface tests"), there is
no reason not to have it to 30ms like all the other tests. "diag.sh" is
not supposed to be slower than the other ones.
To maintain consistency with other scripts, this patch changes it to 30.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-next-20240223-misc-improvements-v1-8-b6c8a10396bd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To maintain consistency with other scripts, this patch changes vars
'capture' and 'checksum' as bool vars in mptcp_join.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-next-20240223-misc-improvements-v1-7-b6c8a10396bd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The variables 'large', 'small', 'sout', 'cout', 'capout' and 'size' are
used in multiple functions, so they should be clearly defined as global
variables at the top of the file.
This patch redefines them at the beginning of simult_flows.sh.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-next-20240223-misc-improvements-v1-6-b6c8a10396bd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The variable 'ret' are defined twice in pm_netlink.sh. This patch drops
this duplicate one that has been defined from the beginning, with
commit eedbc68532 ("selftests: add PM netlink functional tests")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-next-20240223-misc-improvements-v1-5-b6c8a10396bd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is important to have a unique (sub)test name in TAP, because some CI
environments drop tests with duplicated name.
When adding a new subtest entry, an error message is printed in case of
duplicated entries. If there were duplicated entries and if all features
were expected to work, the script exits with an error at the end, after
having printed all subtests in the TAP format. Thanks to that, the MPTCP
CI will catch such issues early.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-next-20240223-misc-improvements-v1-1-b6c8a10396bd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mptcp diag interface already experienced a few locking bugs
that lockdep and appropriate coverage have detected in advance.
Let's add a test-case triggering the relevant code path, to prevent
similar issues in the future.
Be careful to cope with very slow environments.
Note that we don't need an explicit timeout on the mptcp_connect
subprocess to cope with eventual bug/hang-up as the final cleanup
terminating the child processes will take care of that.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-10-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commands 'ss -M' are used in script mptcp_join.sh to display only MPTCP
sockets. So it must be checked if ss tool supports MPTCP in this script.
Fixes: e274f71540 ("selftests: mptcp: add subflow limits test-cases")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-7-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now both a v4 address and a v4-mapped address are supported when
destroying a userspace pm subflow, this patch adds a second subflow
to "userspace pm add & remove address" test, and two subflows could
be removed two different ways, one with the v4mapped and one with v4.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/387
Fixes: 48d73f609d ("selftests: mptcp: update userspace pm addr tests")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-2-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The regs structure just accidentally contains the right values
from the previous test in the spot where we want to change rbx.
It's cleaner if we properly initialize the structure here before
using it.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20240208204844.119326-3-thuth@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
In the spots where we are expecting a successful run, we should
use vcpu_run() instead of _vcpu_run() to make sure that the run
did not fail.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20240208204844.119326-2-thuth@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Just to make things clearer, return TEST_FAIL (-1) instead of an open
coded -1.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/ZdepeMsjagbf1ufD@x1
Arm64 doesn't have Model in /proc/cpuinfo and, thus, cpu_desc doesn't get
assigned.
Running
$ perf data convert --to-json perf.data.json
ends up calling output_json_string() with NULL pointer, which causes a
segmentation fault.
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Evgeny Pistun <kotborealis@awooo.ru>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240223220458.15282-1-ilkka@os.amperecomputing.com
When building BPF skels perf will, by default, install a minimalistic
vmlinux.h file with the types needed by the BPF skels in
tools/perf/util/bpf_skel/ in its build directory.
When 29d16de26d ("perf augmented_raw_syscalls.bpf: Move 'struct
timespec64' to vmlinux.h") was added, a type used in the augmented_raw_syscalls
BPF skel, 'struct timespec64' was not found when building from a pre-existing
build directory, because the vmlinux.h there didn't contain that type,
ending up with this error, spotted in linux-next:
CLANG /tmp/build/perf-tools-next/util/bpf_skel/.tmp/augmented_raw_syscalls.bpf.o
util/bpf_skel/augmented_raw_syscalls.bpf.c:329:15: error: invalid application of 'sizeof' to an incomplete type 'struct timespec64'
329 | __u32 size = sizeof(struct timespec64);
| ^ ~~~~~~~~~~~~~~~~~~~
util/bpf_skel/augmented_raw_syscalls.bpf.c:329:29: note: forward declaration of 'struct timespec64'
329 | __u32 size = sizeof(struct timespec64);
| ^
util/bpf_skel/augmented_raw_syscalls.bpf.c:350:15: error: invalid application of 'sizeof' to an incomplete type 'struct timespec64'
350 | __u32 size = sizeof(struct timespec64);
| ^ ~~~~~~~~~~~~~~~~~~~
util/bpf_skel/augmented_raw_syscalls.bpf.c:350:29: note: forward declaration of 'struct timespec64'
350 | __u32 size = sizeof(struct timespec64);
| ^
2 errors generated.
make[2]: *** [Makefile.perf:1158: /tmp/build/perf-tools-next/util/bpf_skel/.tmp/augmented_raw_syscalls.bpf.o] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [Makefile.perf:261: sub-make] Error 2
make: *** [Makefile:113: install-bin] Error 2
make: Leaving directory '/home/acme/git/perf-tools-next/tools/perf'
So add a Makefile dependency (Namhyung's suggestion) to make sure that
the new tools/perf/util/bpf_skel/vmlinux/vmlinux.h minimal vmlinux is
updated in the build directory, providing the moved 'struct timespec64'
type.
Fixes: 29d16de26d ("perf augmented_raw_syscalls.bpf: Move 'struct timespec64' to vmlinux.h")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Ian Rogers <irogers@google.com>
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/ZdoPrWg-qYFpBJbz@x1
The EDID firmware loading mechanism introduced a few built-in EDIDs that
could be forced on any connector, bypassing the EDIDs it exposes.
While convenient, this limited set of EDIDs doesn't take into account
the connector type, and we can end up with an EDID that is completely
invalid for a given connector.
For example, the edid/800x600.bin file matches the following EDID:
edid-decode (hex):
00 ff ff ff ff ff ff 00 31 d8 00 00 00 00 00 00
05 16 01 03 6d 1b 14 78 ea 5e c0 a4 59 4a 98 25
20 50 54 01 00 00 45 40 01 01 01 01 01 01 01 01
01 01 01 01 01 01 a0 0f 20 00 31 58 1c 20 28 80
14 00 15 d0 10 00 00 1e 00 00 00 ff 00 4c 69 6e
75 78 20 23 30 0a 20 20 20 20 00 00 00 fd 00 3b
3d 24 26 05 00 0a 20 20 20 20 20 20 00 00 00 fc
00 4c 69 6e 75 78 20 53 56 47 41 0a 20 20 00 c2
----------------
Block 0, Base EDID:
EDID Structure Version & Revision: 1.3
Vendor & Product Identification:
Manufacturer: LNX
Model: 0
Made in: week 5 of 2012
Basic Display Parameters & Features:
Analog display
Signal Level Standard: 0.700 : 0.000 : 0.700 V p-p
Blank level equals black level
Sync: Separate Composite Serration
Maximum image size: 27 cm x 20 cm
Gamma: 2.20
DPMS levels: Standby Suspend Off
RGB color display
First detailed timing is the preferred timing
Color Characteristics:
Red : 0.6416, 0.3486
Green: 0.2919, 0.5957
Blue : 0.1474, 0.1250
White: 0.3125, 0.3281
Established Timings I & II:
DMT 0x09: 800x600 60.316541 Hz 4:3 37.879 kHz 40.000000 MHz
Standard Timings:
DMT 0x09: 800x600 60.316541 Hz 4:3 37.879 kHz 40.000000 MHz
Detailed Timing Descriptors:
DTD 1: 800x600 60.316541 Hz 4:3 37.879 kHz 40.000000 MHz (277 mm x 208 mm)
Hfront 40 Hsync 128 Hback 88 Hpol P
Vfront 1 Vsync 4 Vback 23 Vpol P
Display Product Serial Number: 'Linux #0'
Display Range Limits:
Monitor ranges (GTF): 59-61 Hz V, 36-38 kHz H, max dotclock 50 MHz
Display Product Name: 'Linux SVGA'
Checksum: 0xc2
So, an analog monitor EDID. However, if the connector was an HDMI
monitor for example, it breaks the HDMI specification that requires,
among other things, a digital display, the VIC 1 mode and an HDMI Forum
Vendor Specific Data Block in an CTA-861 extension.
We thus end up with a completely invalid EDID, which thus might confuse
HDMI-related code that could parse it.
After some discussions on IRC, we identified mainly two ways to fix
this:
- We can either create more EDIDs for each connector type to provide
a built-in EDID that matches the resolution passed in the name, and
still be a sensible EDID for that connector type;
- Or we can just prevent the EDID to be exposed to userspace if it's
built-in.
Or possibly both.
However, the conclusion was that maybe we just don't need the built-in
EDIDs at all and we should just get rid of them. So here we are.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240221092636.691701-1-mripard@kernel.org
Test that we keep GRO flag in sync when XDP is disabled while
the device is closed.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need it here for the USB fixes, and it resolves a merge conflict as
reported in linux-next in drivers/usb/roles/class.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Borrow the cpu_relax() definitions from kernel's
arch/riscv/include/asm/vdso/processor.h to tools/ for riscv.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Borrow the csr definitions and operations from kernel's
arch/riscv/include/asm/csr.h to tools/ for riscv.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Since only 64bit KVM selftests were supported on all architectures,
add the CONFIG_64BIT definition in kvm/Makefile to ensure only 64bit
definitions were available in the corresponding included files.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Split the arch-neutral test code out of aarch64/arch_timer.c
and put them into a common arch_timer.c. This is a preparation
to share timer test codes in riscv.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
There are intermittent failures occurred when stressing the
arch-timer test in a Qemu VM:
Guest assert failed, vcpu 0; stage; 4; iter: 3
==== Test Assertion Failure ====
aarch64/arch_timer.c:196: config_iter + 1 == irq_iter
pid=4048 tid=4049 errno=4 - Interrupted system call
1 0x000000000040253b: test_vcpu_run at arch_timer.c:248
2 0x0000ffffb60dd5c7: ?? ??:0
3 0x0000ffffb6145d1b: ?? ??:0
0x3 != 0x2 (config_iter + 1 != irq_iter)e
Further test and debug show that the timeout for an interrupt
to arrive do have random high fluctuation, espectially when
testing in an virtual environment.
To alleviate this issue, just expose the timeout value as user
configurable and print some hint message to increase the value
when hitting the failure..
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
Change signed type to unsigned in test_args struct which
only make sense for unsigned value.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
The introduction of $(SPLIT_TESTS) also introduced a warning when
building selftests on architectures that include get-reg-lists:
make: Entering directory '/root/kvm/tools/testing/selftests/kvm'
Makefile:272: warning: overriding recipe for target '/root/kvm/tools/testing/selftests/kvm/get-reg-list'
Makefile:267: warning: ignoring old recipe for target '/root/kvm/tools/testing/selftests/kvm/get-reg-list'
make: Leaving directory '/root/kvm/tools/testing/selftests/kvm'
In addition, the rule for $(SPLIT_TESTS_TARGETS) includes _all_
the $(SPLIT_TESTS_OBJS), which only works because there is just one.
So fix both by adjusting the rules:
- remove $(SPLIT_TESTS_TARGETS) from the $(TEST_GEN_PROGS) rules,
and rename it to $(SPLIT_TEST_GEN_PROGS)
- fix $(SPLIT_TESTS_OBJS) so that it plays well with $(OUTPUT),
rename it to $(SPLIT_TEST_GEN_OBJ), and list the object file
explicitly in the $(SPLIT_TEST_GEN_PROGS) link rule
Fixes: 17da79e009 ("KVM: arm64: selftests: Split get-reg-list test code", 2023-08-09)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
IIO Backend support
===================
New approach from Nuno Sa to the problem of reuse of drivers with
IIO devices that are actually the combination of a highspeed chip
and an FPGA core handling the data capture and flows. It will hopefully
also apply to some other split designs. The ad9467 and axi-adi drivers
are converted over to this framework.
New device support
==================
adi,admfm2000
- New driver for this dual microwave down converter.
ams,as73211
- Add support for as7331 UV sensor.
richtek,rtq6056
- Add support for related parts RTQ6053 and RTQ6059
st,lsm6dsx
- Add ASM330LHHXG1 accelerometer and gyro support (mainly IDs)
ti,ads1298
- New driver for this medical ADC.
Features
========
tests
- Unit tests for the gain-time-scale helper library.
bosch,bmi088
- I2C support.
bosh,bmi160
- Add 10EC5280 ACPI ID. Used in a number of devices that won't get fixed.
The ID is actually a PCI ID belonging to realtech. No response was received
to earlier attempts to notify them of this.
The manufacturers of some devices have replied to say they will not fix
this incorrect ID. Add the ID and hope it isn't a problem.
bosch,bmi323
- Add BOSC0200 ACPI ID. Note this is a duplicate of one in the bmc150
driver (it appears these parts share a windows driver).
Both drivers perform an ID check that is safe on the other part before
successfully probing.
hid-sensors-als
- Add color temperature and chromaticity support. Note this is a replacement
for the series reverted in 6.8 that correctly handles all the potential
channel combinations.
honeywell,hsc030pa
- Triggered buffer support (after driver cleanup).
honeywell,mprls00025pa
- Improved error handling.
- New DT binding to allow use of part number triplet as provided in data sheet
to specify equivalent of most of the binding more efficiently.
- SPI support.
memsic,mxc4005
- ACPI ID MDA6655 as seen in the Chuwi Minibook X 2023
ti,hdc3020
- Add threshold event support (after some driver cleanup)
veml,vcnl4000
- Switch to high resolution proximity measurement.
Cleanup
=======
Various minor typo fixes and better use of defines etc.
Treewide
- Stop using ACPI_PTR(). The savings in space are small and not worth
the complexity of __maybe_unused of ifdef guards. To avoid use in
new IIO drivers based on copy and paste, clean it out.
- cleanup.h based handling of iio_device_claim_direct_mode()/
iio_device_release_direct_mode() using scope_cond_guard().
In many drivers this is combined with other automated cleanup
to give maximum simplifications.
An initial set of drivers are converted over to this infrastructure.
Tools
- Use rewinddir() instead of seekdir() to return to start of file.
core
- Make iio_bus_type constant.
adi,ad16475
- Use irq_get_trigger_type() instead of opencoding.
adi,ad16480
- Use irq_get_trigger_type() instead of opencoding.
adi,ad-sigma-delta
- Avoid overwriting IRQ flags if provided by firmware.
ams,as73211
- Use IIO_VAL_FRACTIONAL for scales to simplify the code and potentially
improve accuracy.
gts-library
- Use a div64_u64() instead of a loop to do a division.
honeywell,mprls00025pa
- Clean up dt-binding doc.
- Drop defaults when DT binding not providing values. Very unlikely
these were useful given they were wrong for vast majority of supported
devices.
- Whitespace cleanup
miramems,da280
- Use i2c_get_match_data() to replace hand rolled ACPI matching code.
semtech,sx9324
- Avoid unnecessary copying of property strings.
st,lsm6dsx
- Improve docs, particularly wrt to making addition of new device
support less noisy.
st,lsm9ds0
- Use dev_err_probe() in all probe() error handling.
- Improved header includes.
- Tidy up termination of ID tables.
ti,ads1014
- Correct upper bound on PGA (wrong value had no actual impact)
ti,afe4403/4404
- devm_ useage to simplify error handling in probe() and allow() remove to
be dropped.
voltage-divider
- Add dt-binding for io-channel-cells to allow such a device to be both
an IIO consumer and IIO producer at the same time.
-----BEGIN PGP SIGNATURE-----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=xkgf
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.9a' of http://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: 1st set of new device support, features and cleanup for 6.9
IIO Backend support
===================
New approach from Nuno Sa to the problem of reuse of drivers with
IIO devices that are actually the combination of a highspeed chip
and an FPGA core handling the data capture and flows. It will hopefully
also apply to some other split designs. The ad9467 and axi-adi drivers
are converted over to this framework.
New device support
==================
adi,admfm2000
- New driver for this dual microwave down converter.
ams,as73211
- Add support for as7331 UV sensor.
richtek,rtq6056
- Add support for related parts RTQ6053 and RTQ6059
st,lsm6dsx
- Add ASM330LHHXG1 accelerometer and gyro support (mainly IDs)
ti,ads1298
- New driver for this medical ADC.
Features
========
tests
- Unit tests for the gain-time-scale helper library.
bosch,bmi088
- I2C support.
bosh,bmi160
- Add 10EC5280 ACPI ID. Used in a number of devices that won't get fixed.
The ID is actually a PCI ID belonging to realtech. No response was received
to earlier attempts to notify them of this.
The manufacturers of some devices have replied to say they will not fix
this incorrect ID. Add the ID and hope it isn't a problem.
bosch,bmi323
- Add BOSC0200 ACPI ID. Note this is a duplicate of one in the bmc150
driver (it appears these parts share a windows driver).
Both drivers perform an ID check that is safe on the other part before
successfully probing.
hid-sensors-als
- Add color temperature and chromaticity support. Note this is a replacement
for the series reverted in 6.8 that correctly handles all the potential
channel combinations.
honeywell,hsc030pa
- Triggered buffer support (after driver cleanup).
honeywell,mprls00025pa
- Improved error handling.
- New DT binding to allow use of part number triplet as provided in data sheet
to specify equivalent of most of the binding more efficiently.
- SPI support.
memsic,mxc4005
- ACPI ID MDA6655 as seen in the Chuwi Minibook X 2023
ti,hdc3020
- Add threshold event support (after some driver cleanup)
veml,vcnl4000
- Switch to high resolution proximity measurement.
Cleanup
=======
Various minor typo fixes and better use of defines etc.
Treewide
- Stop using ACPI_PTR(). The savings in space are small and not worth
the complexity of __maybe_unused of ifdef guards. To avoid use in
new IIO drivers based on copy and paste, clean it out.
- cleanup.h based handling of iio_device_claim_direct_mode()/
iio_device_release_direct_mode() using scope_cond_guard().
In many drivers this is combined with other automated cleanup
to give maximum simplifications.
An initial set of drivers are converted over to this infrastructure.
Tools
- Use rewinddir() instead of seekdir() to return to start of file.
core
- Make iio_bus_type constant.
adi,ad16475
- Use irq_get_trigger_type() instead of opencoding.
adi,ad16480
- Use irq_get_trigger_type() instead of opencoding.
adi,ad-sigma-delta
- Avoid overwriting IRQ flags if provided by firmware.
ams,as73211
- Use IIO_VAL_FRACTIONAL for scales to simplify the code and potentially
improve accuracy.
gts-library
- Use a div64_u64() instead of a loop to do a division.
honeywell,mprls00025pa
- Clean up dt-binding doc.
- Drop defaults when DT binding not providing values. Very unlikely
these were useful given they were wrong for vast majority of supported
devices.
- Whitespace cleanup
miramems,da280
- Use i2c_get_match_data() to replace hand rolled ACPI matching code.
semtech,sx9324
- Avoid unnecessary copying of property strings.
st,lsm6dsx
- Improve docs, particularly wrt to making addition of new device
support less noisy.
st,lsm9ds0
- Use dev_err_probe() in all probe() error handling.
- Improved header includes.
- Tidy up termination of ID tables.
ti,ads1014
- Correct upper bound on PGA (wrong value had no actual impact)
ti,afe4403/4404
- devm_ useage to simplify error handling in probe() and allow() remove to
be dropped.
voltage-divider
- Add dt-binding for io-channel-cells to allow such a device to be both
an IIO consumer and IIO producer at the same time.
* tag 'iio-for-6.9a' of http://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (106 commits)
iio: imu: bmi323: Add ACPI Match Table
iio: accel: bmc150: Document duplicate ACPI entries with bmi323 driver
iio: adc: ti-ads1298: Add driver
dt-bindings: iio: adc: ti-ads1298: Add bindings
iio: pressure: hsc030pa add triggered buffer
iio: pressure: hsc030pa add mandatory delay
iio: pressure: hsc030pa: update datasheet URLs
iio: pressure: hsc030pa: include cleanup
iio: pressure: hsc030pa: use signed type to hold div_64() result
dt-bindings: iio: pressure: honeywell,hsc030pa.yaml add spi props
iio: st_sensors: lsm9ds0: Use common style for terminator in ID tables
iio: st_sensors: lsm9ds0: Don't use "proxy" headers
iio: st_sensors: lsm9ds0: Use dev_err_probe() everywhere
iio: adc: adi-axi-adc: move to backend framework
iio: adc: ad9467: convert to backend framework
iio: add the IIO backend framework
iio: buffer-dmaengine: export buffer alloc and free functions
of: property: add device link support for io-backends
dt-bindings: adc: axi-adc: update bindings for backend framework
dt-bindings: adc: ad9467: add new io-backend property
...
- Fix NUMA initialization from ACPI CEDT.CFMWS
- Fix region assembly failures due to async init order
- Fix / simplify export of qos_class information
- Fix cxl_acpi initialization vs single-window-init failures
- Fix handling of repeated 'pci_channel_io_frozen' notifications
- Workaround platforms that violate host-physical-address ==
system-physical address assumptions
- Defer CXL CPER notification handling to v6.9
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCZdpH9gAKCRDfioYZHlFs
ZwZlAQDE+PxTJnjCXDVnDylVF4yeJF2G/wSkH1CFVFVxa0OjhAD/ZFScS/nz/76l
1IYYiiLqmVO5DdmJtfKtq16m7e1cZwc=
=PuPF
-----END PGP SIGNATURE-----
Merge tag 'cxl-fixes-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dan Williams:
"A collection of significant fixes for the CXL subsystem.
The largest change in this set, that bordered on "new development", is
the fix for the fact that the location of the new qos_class attribute
did not match the Documentation. The fix ends up deleting more code
than it added, and it has a new unit test to backstop basic errors in
this interface going forward. So the "red-diff" and unit test saved
the "rip it out and try again" response.
In contrast, the new notification path for firmware reported CXL
errors (CXL CPER notifications) has a locking context bug that can not
be fixed with a red-diff. Given where the release cycle stands, it is
not comfortable to squeeze in that fix in these waning days. So, that
receives the "back it out and try again later" treatment.
There is a regression fix in the code that establishes memory NUMA
nodes for platform CXL regions. That has an ack from x86 folks. There
are a couple more fixups for Linux to understand (reassemble) CXL
regions instantiated by platform firmware. The policy around platforms
that do not match host-physical-address with system-physical-address
(i.e. systems that have an address translation mechanism between the
address range reported in the ACPI CEDT.CFMWS and endpoint decoders)
has been softened to abort driver load rather than teardown the memory
range (can cause system hangs). Lastly, there is a robustness /
regression fix for cases where the driver would previously continue in
the face of error, and a fixup for PCI error notification handling.
Summary:
- Fix NUMA initialization from ACPI CEDT.CFMWS
- Fix region assembly failures due to async init order
- Fix / simplify export of qos_class information
- Fix cxl_acpi initialization vs single-window-init failures
- Fix handling of repeated 'pci_channel_io_frozen' notifications
- Workaround platforms that violate host-physical-address ==
system-physical address assumptions
- Defer CXL CPER notification handling to v6.9"
* tag 'cxl-fixes-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/acpi: Fix load failures due to single window creation failure
acpi/ghes: Remove CXL CPER notifications
cxl/pci: Fix disabling memory if DVSEC CXL Range does not match a CFMWS window
cxl/test: Add support for qos_class checking
cxl: Fix sysfs export of qos_class for memdev
cxl: Remove unnecessary type cast in cxl_qos_class_verify()
cxl: Change 'struct cxl_memdev_state' *_perf_list to single 'struct cxl_dpa_perf'
cxl/region: Allow out of order assembly of autodiscovered regions
cxl/region: Handle endpoint decoders in cxl_region_find_decoder()
x86/numa: Fix the sort compare func used in numa_fill_memblks()
x86/numa: Fix the address overlap check in numa_fill_memblks()
cxl/pci: Skip to handle RAS errors if CXL.mem device is detached
devlink and ethtool have a trailing _ in the header guard. I must have
copy/pasted it into new guards, assuming it's a headers_install artifact.
This fixes build if system headers are old.
Fixes: 8f109e91b8 ("tools: ynl: include dpll and mptcp_pm in C codegen")
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240222234831.179181-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During decoding of messages coming from kernel, attribute values are
converted to enum names in case the attribute type is enum of bitfield32.
However, when user constructs json message, he has to pass plain scalar
values. See "state" "selector" and "value" attributes in following
examples:
$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml --do pin-set --json '{"id": 0, "parent-device": {"parent-id": 0, "state": 1}}'
$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/devlink.yaml --do port-set --json '{"bus-name": "pci", "dev-name": "0000:08:00.1", "port-index": 98304, "port-function": {"caps": {"selector": 1, "value": 1 }}}'
Allow user to pass strings containing enum names, convert them to scalar
values to be encoded into Netlink message:
$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml --do pin-set --json '{"id": 0, "parent-device": {"parent-id": 0, "state": "connected"}}'
$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/devlink.yaml --do port-set --json '{"bus-name": "pci", "dev-name": "0000:08:00.1", "port-index": 98304, "port-function": {"caps": {"selector": ["roce-bit"], "value": ["roce-bit"] }}}'
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240222134351.224704-4-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As a preparation to handle enums for scalar values, unify the processing
of all scalar types in a single elif statement.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240222134351.224704-3-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The flag attr presence in Netlink message indicates value "true",
if it is missing in the message it means "false".
Allow user to specify attrname with value "true"/"false"
in json for flag attrs, treat "false" value properly.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240222134351.224704-2-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Until authenticated the platform enforces a state machine. Adjust
unit tests with this in mind.
Correct the return codes for all the states the unit tests ends up
hitting:
* Set Param / Get Param: DBC_ERROR_BAD_STATE
* Set UID: DBC_ERROR_SIGNATURE_INVALID
* Authencitated Nonce: DBC_ERROR_BAD_PARAMETERS
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add tests for both L2 and L3 CAT to verify the return values
generated by writing non-contiguous CBMs don't contradict the
reported non-contiguous support information.
Use a logical XOR to confirm return value of write_schemata() and
non-contiguous CBMs support information match.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Feature checking done by resctrl_mon_feature_exists() covers features
represented by the feature name presence inside the 'mon_features' file
in /sys/fs/resctrl/info/L3_MON directory. There exists a different way
to represent feature support and that is by the presence of 0 or 1 in a
single file in the info/resource directory. In this case the filename
represents what feature support is being indicated.
Add a generic function to check file presence in the
/sys/fs/resctrl/info/<RESOURCE> directory.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
validate_resctrl_feature_request() is used to test both if a resource is
present in the info directory, and if a passed monitoring feature is
present in the mon_features file.
Refactor validate_resctrl_feature_request() into two smaller functions
that each accomplish one check to give feature checking more
granularity:
- Resource directory presence in the /sys/fs/resctrl/info directory.
- Feature name presence in the /sys/fs/resctrl/info/<RESOURCE>/mon_features
file.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The CAT non-contiguous selftests have to read the file responsible for
reporting support of non-contiguous CBMs in kernel (resctrl). Then the
test compares if that information matches what is reported by CPUID
output.
Add a generic helper function to read an unsigned number from
/sys/fs/resctrl/info/<RESOURCE>/<FILE>.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In Makefiles, $(error ), $(warning ), and $(info ) expand to the empty
string, as explained in the GNU Make manual [1]:
"The result of the expansion of this function is the empty string."
Therefore, they are no-op except for logging purposes.
$(shell ...) expands to the output of the command. It expands to the
empty string when the command does not print anything to stdout.
Hence, $(shell mkdir ...) is no-op except for creating the directory.
Remove meaningless assignments.
[1]: https://www.gnu.org/software/make/manual/make.html#Make-Control-Functions
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20240221134201.2656908-1-masahiroy@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-kbuild@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
To select test to run -t parameter can be used. However, -t cat
currently maps to L3 CAT test which will be confusing after more CAT
related tests will be added.
Allow selecting tests as groups and call L3 CAT test "L3_CAT", "CAT"
group will enable all CAT related tests.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently the perf tool doesn't detect support for extended event types
on Apple M1/M2 systems, and will not auto-expand plain PERF_EVENT_TYPE
hardware events into per-PMU events. This is due to the detection of
extended event types not handling mandatory filters required by the
M1/M2 PMU driver.
PMU drivers and the core perf_events code can require that
perf_event_attr::exclude_* filters are configured in a specific way and
may reject certain configurations of filters, for example:
(a) Many PMUs lack support for any event filtering, and require all
perf_event_attr::exclude_* bits to be clear. This includes Alpha's
CPU PMU, and ARM CPU PMUs prior to the introduction of PMUv2 in
ARMv7,
(b) When /proc/sys/kernel/perf_event_paranoid >= 2, the perf core
requires that perf_event_attr::exclude_kernel is set.
(c) The Apple M1/M2 PMU requires that perf_event_attr::exclude_guest is
set as the hardware PMU does not count while a guest is running (but
might be extended in future to do so).
In is_event_supported(), we try to account for cases (a) and (b), first
attempting to open an event without any filters, and if this fails,
retrying with perf_event_attr::exclude_kernel set. We do not account for
case (c), or any other filters that drivers could theoretically require
to be set.
Thus is_event_supported() will fail to detect support for any events
targeting an Apple M1/M2 PMU, even where events would be supported with
perf_event_attr:::exclude_guest set.
Since commit:
82fe2e45cd ("perf pmus: Check if we can encode the PMU number in perf_event_attr.type")
... we use is_event_supported() to detect support for extended types,
with the PMU ID encoded into the perf_event_attr::type. As above, on an
Apple M1/M2 system this will always fail to detect that the event is
supported, and consequently we fail to detect support for extended types
even when these are supported, as they have been since commit:
5c81672865 ("arm_pmu: Add PERF_PMU_CAP_EXTENDED_HW_TYPE capability")
Due to this, the perf tool will not automatically expand plain
PERF_TYPE_HARDWARE events into per-PMU events, even when all the
necessary kernel support is present.
This patch updates is_event_supported() to additionally try opening
events with perf_event_attr::exclude_guest set, allowing support for
events to be detected on Apple M1/M2 systems. I believe that this is
sufficient for all contemporary CPU PMU drivers, though in future it may
be necessary to check for other combinations of filter bits.
I've deliberately changed the check to not expect a specific error code
for missing filters, as today ;the kernel may return a number of
different error codes for missing filters (e.g. -EACCESS, -EINVAL, or
-EOPNOTSUPP) depending on why and where the filter configuration is
rejected, and retrying for any error is more robust.
Note that this does not remove the need for commit:
a24d9d9dc0 ("perf parse-events: Make legacy events lower priority than sysfs/JSON")
... which is still necessary so that named-pmu/event/ events work on
kernels without extended type support, even if the event name happens to
be the same as a PERF_EVENT_TYPE_HARDWARE event (e.g. as is the case for
the M1/M2 PMU's 'cycles' and 'instructions' events).
Fixes: 82fe2e45cd ("perf pmus: Check if we can encode the PMU number in perf_event_attr.type")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@arm.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Cc: Hector Martin <marcan@marcan.st>
Cc: James Clark <james.clark@arm.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240126145605.1005472-1-mark.rutland@arm.com
or aren't considered appropriate for backporting.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZdfSoQAKCRDdBJ7gKXxA
jtdcAQCEMwrTnSVOfP0WxixL11HK8a1bJdezHBLWFUDscm4BXgD9EV4mgQ2yPDA6
ka+Lf9MucZSpJ2QYZA4GoDqP4wefawA=
=zI6b
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-02-22-15-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"A batch of MM (and one non-MM) hotfixes.
Ten are cc:stable and the remainder address post-6.7 issues or aren't
considered appropriate for backporting"
* tag 'mm-hotfixes-stable-2024-02-22-15-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
kasan: guard release_free_meta() shadow access with kasan_arch_is_ready()
mm/damon/lru_sort: fix quota status loss due to online tunings
mm/damon/reclaim: fix quota stauts loss due to online tunings
MAINTAINERS: mailmap: update Shakeel's email address
mm/damon/sysfs-schemes: handle schemes sysfs dir removal before commit_schemes_quota_goals
mm: memcontrol: clarify swapaccount=0 deprecation warning
mm/memblock: add MEMBLOCK_RSRV_NOINIT into flagname[] array
mm/zswap: invalidate duplicate entry when !zswap_enabled
lib/Kconfig.debug: TEST_IOV_ITER depends on MMU
mm/swap: fix race when skipping swapcache
mm/swap_state: update zswap LRU's protection range with the folio locked
selftests/mm: uffd-unit-test check if huge page size is 0
mm/damon/core: check apply interval in damon_do_apply_schemes()
mm: zswap: fix missing folio cleanup in writeback race path
If an integer's type has x bits, shifting the integer left by x or more
is undefined behavior.
This can happen in the rotate function when attempting to do a rotation
of the whole value by 0.
Fixes: 0dd714bfd2 ("KVM: s390: selftest: memop: Add cmpxchg tests")
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Link: https://lore.kernel.org/r/20240111094805.363047-1-nsg@linux.ibm.com
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20240111094805.363047-1-nsg@linux.ibm.com>
Extend set_memory_region_test's invalid flags subtest to verify that
GUEST_MEMFD is incompatible with READONLY. GUEST_MEMFD doesn't currently
support writes from userspace and KVM doesn't support emulated MMIO on
private accesses, and so KVM is supposed to reject the GUEST_MEMFD+READONLY
in order to avoid configuration that KVM can't support.
Link: https://lore.kernel.org/r/20240222190612.2942589-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Actually create a GUEST_MEMFD instance and pass it to KVM when doing
negative tests for KVM_SET_USER_MEMORY_REGION2 + KVM_MEM_GUEST_MEMFD.
Without a valid GUEST_MEMFD file descriptor, KVM_SET_USER_MEMORY_REGION2
will always fail with -EINVAL, resulting in false passes for any and all
tests of illegal combinations of KVM_MEM_GUEST_MEMFD and other flags.
Fixes: 5d74316466 ("KVM: selftests: Add a memory region subtest to validate invalid flags")
Link: https://lore.kernel.org/r/20240222190612.2942589-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Since commit 3570ee046c ("s390/smp: keep the original lowcore for
CPU 0"), there is no longer any architecture that needs to override
arch_call_rest_init().
Remove the weak wrapper around rest_init(), call rest_init() directly, and
make rest_init() static.
Link: https://lkml.kernel.org/r/aa10868bfb176eef4abb8bb4a710b85330792694.1706106183.git.geert@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add missing tests to run_vmtests.sh. The mm kselftests are run through
run_vmtests.sh. If a test isn't present in this script, it'll not run
with run_tests or `make -C tools/testing/selftests/mm run_tests`.
[usama.anjum@collabora.com: use correct flag in the code]
Link: https://lkml.kernel.org/r/20240201130538.1404897-2-usama.anjum@collabora.com
Link: https://lkml.kernel.org/r/20240125154608.720072-6-usama.anjum@collabora.com
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Save and restore nr_hugepages before changing it during the test. A test
should not change system wide settings.
Link: https://lkml.kernel.org/r/20240125154608.720072-5-usama.anjum@collabora.com
Fixes: 5f23f6d082 ("x86/pkeys: Add self-tests")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Save and restore nr_hugepages before changing it during the test. A test
should not change system wide settings.
Link: https://lkml.kernel.org/r/20240125154608.720072-4-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests/mm: Improve run_vmtests.sh", v3.
In this series, I'm trying to add 3 missing tests to vm_runtests.sh which
is used to run all the tests in mm suite. These tests weren't running by
CIs. While enabling them and through review feedback, I've fixed some
problems in tests as well. I've found more flakiness in more tests which
I'll be fixing with future patches.
hugetlb-read-hwpoison test is being added where it can only run with newly
added "-d" (destructive) flag only. Not sure why it is failing again. So
once it become stable, we can think of moving it to default set of tests
if it doesn't have any side-effect to them.
This patch (of 5):
Do not unmount the cgroup if it wasn't mounted by the test. The earlier
patch had fixed this for charge_reserved_hugetlb, but not for this test.
I'm adding fixes tag to that earlier patch.
Link: https://lkml.kernel.org/r/20240125154608.720072-1-usama.anjum@collabora.com
Link: https://lkml.kernel.org/r/20240125154608.720072-2-usama.anjum@collabora.com
Fixes: 209376ed2a ("selftests/vm: make charge_reserved_hugetlb.sh work with existing cgroup setting")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This adds the promised selftest for eventfd. It will verify the flags of
eventfd2, including EFD_CLOEXEC, EFD_NONBLOCK and EFD_SEMAPHORE.
Link: https://lkml.kernel.org/r/tencent_3C9A298878D22B5D8F79DC2FEE99BB4A8F05@qq.com
Signed-off-by: Wen Yang <wenyang.linux@foxmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Pengfei Xu <pengfei.xu@intel.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Andrei Vagin <avagin@google.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a selftest to cover the zswapin code path, allocating more memory than
the cgroup limit to trigger swapout/zswapout, then reading the pages back
in memory several times. This is inspired by a recently encountered
kernel crash on the zswapin path in our internal kernel, which went
undetected because of a lack of test coverage for this path.
Add a selftest to verify that when memory.zswap.max = 0, no pages can go
to the zswap pool for the cgroup.
[nphamcs@gmail.com: remove redundant comment, add success checks]
Link: https://lkml.kernel.org/r/20240222043132.616320-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20240205225608.3083251-4-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Suggested-by: Rik van Riel <riel@surriel.com>
Suggested-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ensure struct_ops rejects the registration of struct_ops types without
proper CFI stub functions.
bpf_test_no_cfi.ko is a module that attempts to register a struct_ops type
called "bpf_test_no_cfi_ops" with cfi_stubs of NULL and non-NULL value.
The NULL one should fail, and the non-NULL one should succeed. The module
can only be loaded successfully if these registrations yield the expected
results.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240222021105.1180475-3-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
- Fix dirty tracking bitmap collection when using reporting bitmaps that
are not neatly aligned to u64's or match the IO page table radix tree
layout.
- Add self tests to cover the cases that were found to be broken.
- Add missing enforcement of invalidation type in the uapi.
- Fix selftest config generation
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZddJHAAKCRCFwuHvBreF
YaRyAQCuywXMOQsPcTXZk+bepQ0EacRZKfyPrIcKMaHC1QLwKgEA9ApiVSbai0Q+
5IFX+rWrLUB4jiH5D12kmfhxgydFDAk=
=CCxs
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
- Fix dirty tracking bitmap collection when using reporting bitmaps
that are not neatly aligned to u64's or match the IO page table radix
tree layout.
- Add self tests to cover the cases that were found to be broken.
- Add missing enforcement of invalidation type in the uapi.
- Fix selftest config generation
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
selftests/iommu: fix the config fragment
iommufd: Reject non-zero data_type if no data_len is provided
iommufd/iova_bitmap: Consider page offset for the pages to be pinned
iommufd/selftest: Add mock IO hugepages tests
iommufd/selftest: Hugepage mock domain support
iommufd/selftest: Refactor mock_domain_read_and_clear_dirty()
iommufd/selftest: Refactor dirty bitmap tests
iommufd/iova_bitmap: Handle recording beyond the mapped pages
iommufd/selftest: Test u64 unaligned bitmaps
iommufd/iova_bitmap: Switch iova_bitmap::bitmap to an u8 array
iommufd/iova_bitmap: Bounds check mapped::pages access
In function get_pkg_num() if fopen_or_die() succeeds it returns a file
pointer to be used. But fclose() is never called before returning from
the function.
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Every test result report in the compaction test prints a distinct log
messae, and some of the reports print a name that varies at runtime. This
causes problems for automation since a lot of automation software uses the
printed string as the name of the test, if the name varies from run to run
and from pass to fail then the automation software can't identify that a
test changed result or that the same tests are being run.
Refactor the logging to use a consistent name when printing the result of
the test, printing the existing messages as diagnostic information instead
so they are still available for people trying to interpret the results.
Link: https://lkml.kernel.org/r/20240209-kselftest-mm-cleanup-v1-2-a3c0386496b5@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests/mm: Output cleanups for the compaction test".
A couple of small updates for the check_compaction selftest which make
it play more nicely with test automation systems.
This patch (of 2):
When the compaction test is run it checks to make sure that prerequistives
the test requires are available and skips the tests if not. When this
happens we log the test as a pass rather than a skip, log as a skip so
that the distinction is clear and automation can see unexpected skips.
Link: https://lkml.kernel.org/r/20240209-kselftest-mm-cleanup-v1-0-a3c0386496b5@kernel.org
Link: https://lkml.kernel.org/r/20240209-kselftest-mm-cleanup-v1-1-a3c0386496b5@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON debugfs selftests dependency checker assumes debugfs would be
mounted at /sys/kernel/debug. That would be ok for many cases, but some
systems might mounted the file system on some different places. Parse the
real mount point using /proc/mounts file.
Link: https://lkml.kernel.org/r/20240207203134.69976-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit ebb3f994dd ("mm/damon/dbgfs: fix 'struct pid' leaks in
'dbgfs_target_ids_write()'") fixes a pid leak bug in DAMON debugfs
interface, namely dbgfs_target_ids_write() function. Add a selftest for
the issue to prevent the problem from mistakenly recurring.
Link: https://lkml.kernel.org/r/20240207203134.69976-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
commit 3479641796 ("mm/damon/dbgfs: protect targets destructions with
kdamond_lock") fixed a race of DAMON debugfs interface. Specifically, the
race was happening between target_ids_read() and dbgfs_before_terminate().
Add a test for the issue to prevent the problem from accidentally
recurring.
Link: https://lkml.kernel.org/r/20240207203134.69976-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a selftest for DAMOS apply intervals. It runs two schemes having
different apply interval agains an artificial memory access workload, and
check if the scheme with smaller apply interval was applied more
frequently.
Link: https://lkml.kernel.org/r/20240207203134.69976-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a selftest for verifying the DAMOS quota feature. The test is very
similar to sysfs_update_schemes_tried_regions_wss_estimation.py. It
starts an artificial workload of 20 MiB working set, run DAMON to find the
working set size, but with 1 MiB/100 ms size quota. Then, it collect the
DAMON-found working set size every 100 ms and check if the quota was
always applied as expected. For the confirmation, the tests shows the
stat-applied region size and the qt_exceeds stat.
Link: https://lkml.kernel.org/r/20240207203134.69976-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Update the test-purpose DAMON sysfs control Python module to support DAMOS
apply interval.
Link: https://lkml.kernel.org/r/20240207203134.69976-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Update the test-purpose DAMON sysfs control Python module to support DAMOS
stats.
Link: https://lkml.kernel.org/r/20240207203134.69976-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests/damon: add more tests for core functionalities and
corner cases".
Continue DAMON selftests' test coverage improvement works with a trivial
improvement of the test code itself. The sequence of the patches in
patchset is as follows.
The first five patches add two DAMON core functionalities tests. Those
begins with three patches (patches 1-3) that update the test-purpose DAMON
sysfs interface wrapper to support DAMOS quota, stats, and apply interval
features, respectively. The fourth patch implements and adds a selftest
for DAMOS quota feature, using the DAMON sysfs interface wrapper's newly
added support of the quota and the stats feature. The fifth patch further
implements and adds a selftest for DAMOS apply interval using the DAMON
sysfs interface wrapper's newly added support of the apply interval and
the stats feature.
Two patches (patches 6 and 7) for implementing and adding two corner cases
handling selftests follow. Those try to avoid two previously fixed bugs
from recurring.
Finally, a patch for making DAMON debugfs selftests dependency checker to
use /proc/mounts instead of the hard-coded mount point assumption follows.
This patch (of 8):
Update the test-purpose DAMON sysfs control Python module to support DAMOS
quota.
Link: https://lkml.kernel.org/r/20240207203134.69976-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240207203134.69976-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
hugetlb_madv_vs_map selftest was not part of the mm test-suite since we
didn't have a fix for the problem it found.
Now that the problem is already fixed (see previous commit), let's enable
this selftest in the default test-suite.
Link: https://lkml.kernel.org/r/20240205191843.4009640-3-leitao@debian.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The usage of run_vmtests.sh does not include hugetlb, which is a valid
test category.
Add the 'hugetlb' to the usage of run_vmtests.sh.
Link: https://lkml.kernel.org/r/20240129115246.1234253-1-leitao@debian.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Joel Savitz <jsavitz@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Link: https://lkml.kernel.org/r/20240202113119.2047740-13-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Link: https://lkml.kernel.org/r/20240202113119.2047740-12-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Also remove unneeded logging which isn't enabled. Skip a hugepage size if
it has less free pages to avoid unnecessary failures. For examples, some
systems may not have 1GB hugepage free. So skip 1GB for testing in this
test instead of failing the entire test.
Link: https://lkml.kernel.org/r/20240202113119.2047740-11-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Link: https://lkml.kernel.org/r/20240202113119.2047740-9-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Link: https://lkml.kernel.org/r/20240202113119.2047740-8-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Link: https://lkml.kernel.org/r/20240202113119.2047740-7-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
I've done some cleanups as well.
Link: https://lkml.kernel.org/r/20240202113119.2047740-6-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Link: https://lkml.kernel.org/r/20240202113119.2047740-5-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Minor cleanups have also been included.
Link: https://lkml.kernel.org/r/20240202113119.2047740-4-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Link: https://lkml.kernel.org/r/20240202113119.2047740-3-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Following change will rename 'monitor_on' DAMON debugfs file to
'monitor_on_DEPRECATED', to make the deprecation unignorable in runtime.
Since it could make DAMON selftests fail and disturb future bisects,
update DAMON selftests to support the change.
Link: https://lkml.kernel.org/r/20240130013549.89538-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Alex Shi <alexs@kernel.org>
Cc: Hu Haowen <2023002089@link.tyut.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This test stresses the race between of madvise(DONTNEED), a page fault
and a parallel huge page mmap, which should fail due to lack of
available page available for mapping.
This test case must run on a system with one and only one huge page
available.
# echo 1 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
During setup, the test allocates the only available page, and starts
three threads:
- thread 1:
* madvise(MADV_DONTNEED) on the allocated huge page
- thread 2:
* Write to the allocated huge page
- thread 3:
* Tries to allocated (steal) an extra huge page (which is not
available)
thread 3 should never succeed in the allocation, since the only huge
page was never unmapped, and should be reserved.
Touching the old page after thread3 allocation will raise a SIGBUS.
Link: https://lkml.kernel.org/r/20240105155419.1939484-2-leitao@debian.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When running with CATEGORY= (thp | hugetlb) we see a large numbers of
tests failing. These failures are due to not being able to allocate a
hugepage and normally occur on memory contrainted systems or when using
large page sizes.
drop_cache and compact_memory before the tests for a higher chance at a
successful hugepage allocation.
Link: https://lkml.kernel.org/r/20240117180037.15734-1-npache@redhat.com
Signed-off-by: Nico Pache <npache@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The batch lookup and lookup_and_delete APIs have two parameters,
in_batch and out_batch, to facilitate iterative
lookup/lookup_and_deletion operations for supported maps. Except NULL
for in_batch at the start of these two batch operations, both parameters
need to point to memory equal or larger than the respective map key
size, except for various hashmaps (hash, percpu_hash, lru_hash,
lru_percpu_hash) where the in_batch/out_batch memory size should be
at least 4 bytes.
Document these semantics to clarify the API.
Signed-off-by: Martin Kelly <martin.kelly@crowdstrike.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240221211838.1241578-1-martin.kelly@crowdstrike.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
With the proliferation of large folios for file-backed memory, and more
recently the introduction of multi-size THP for anonymous memory, it is
becoming useful to be able to see exactly how large folios are mapped into
processes. For some architectures (e.g. arm64), if most memory is mapped
using contpte-sized and -aligned blocks, TLB usage can be optimized so
it's useful to see where these requirements are and are not being met.
thpmaps is a Python utility that reads /proc/<pid>/smaps,
/proc/<pid>/pagemap and /proc/kpageflags to print information about how
transparent huge pages (both file and anon) are mapped to a specified
process or cgroup. It aims to help users debug and optimize their
workloads. In future we may wish to introduce stats directly into the
kernel (e.g. smaps or similar), but for now this provides a short term
solution without the need to introduce any new ABI.
Run with help option for a full listing of the arguments:
# ./thpmaps --help
--8<--
usage: thpmaps [-h] [--pid pid | --cgroup path] [--rollup]
[--cont size[KMG]] [--inc-smaps] [--inc-empty]
[--periodic sleep_ms]
Prints information about how transparent huge pages are mapped, either
system-wide, or for a specified process or cgroup.
When run with --pid, the user explicitly specifies the set of pids to
scan. e.g. "--pid 10 [--pid 134 ...]". When run with --cgroup, the user
passes either a v1 or v2 cgroup and all pids that belong to the cgroup
subtree are scanned. When run with neither --pid nor --cgroup, the full
set of pids on the system is gathered from /proc and scanned as if the
user had provided "--pid 1 --pid 2 ...".
A default set of statistics is always generated for THP mappings.
However, it is also possible to generate additional statistics for
"contiguous block mappings" where the block size is user-defined.
Statistics are maintained independently for anonymous and file-backed
(pagecache) memory and are shown both in kB and as a percentage of either
total anonymous or total file-backed memory as appropriate.
THP Statistics
--------------
Statistics are always generated for fully- and contiguously-mapped THPs
whose mapping address is aligned to their size, for each <size> supported
by the system. Separate counters describe THPs mapped by PTE vs those
mapped by PMD. (Although note a THP can only be mapped by PMD if it is
PMD-sized):
- anon-thp-pte-aligned-<size>kB
- file-thp-pte-aligned-<size>kB
- anon-thp-pmd-aligned-<size>kB
- file-thp-pmd-aligned-<size>kB
Similarly, statistics are always generated for fully- and contiguously-
mapped THPs whose mapping address is *not* aligned to their size, for each
<size> supported by the system. Due to the unaligned mapping, it is
impossible to map by PMD, so there are only PTE counters for this case:
- anon-thp-pte-unaligned-<size>kB
- file-thp-pte-unaligned-<size>kB
Statistics are also always generated for mapped pages that belong to a THP
but where the is THP is *not* fully- and contiguously- mapped. These
"partial" mappings are all counted in the same counter regardless of the
size of the THP that is partially mapped:
- anon-thp-pte-partial
- file-thp-pte-partial
Contiguous Block Statistics
---------------------------
An optional, additional set of statistics is generated for every
contiguous block size specified with `--cont <size>`. These statistics
show how much memory is mapped in contiguous blocks of <size> and also
aligned to <size>. A given contiguous block must all belong to the same
THP, but there is no requirement for it to be the *whole* THP. Separate
counters describe contiguous blocks mapped by PTE vs those mapped by PMD:
- anon-cont-pte-aligned-<size>kB
- file-cont-pte-aligned-<size>kB
- anon-cont-pmd-aligned-<size>kB
- file-cont-pmd-aligned-<size>kB
As an example, if monitoring 64K contiguous blocks (--cont 64K), there are
a number of sources that could provide such blocks: a fully- and
contiguously-mapped 64K THP that is aligned to a 64K boundary would
provide 1 block. A fully- and contiguously-mapped 128K THP that is
aligned to at least a 64K boundary would provide 2 blocks. Or a 128K THP
that maps its first 100K, but contiguously and starting at a 64K boundary
would provide 1 block. A fully- and contiguously-mapped 2M THP would
provide 32 blocks. There are many other possible permutations.
options:
-h, --help show this help message and exit
--pid pid Process id of the target process. Maybe issued
multiple times to scan multiple processes. --pid
and --cgroup are mutually exclusive. If neither
are provided, all processes are scanned to
provide system-wide information.
--cgroup path Path to the target cgroup in sysfs. Iterates
over every pid in the cgroup and its children.
--pid and --cgroup are mutually exclusive. If
neither are provided, all processes are scanned
to provide system-wide information.
--rollup Sum the per-vma statistics to provide a summary
over the whole system, process or cgroup.
--cont size[KMG] Adds stats for memory that is mapped in
contiguous blocks of <size> and also aligned to
<size>. May be issued multiple times to track
multiple sized blocks. Useful to infer e.g.
arm64 contpte and hpa mappings. Size must be a
power-of-2 number of pages.
--inc-smaps Include all numerical, additive
/proc/<pid>/smaps stats in the output.
--inc-empty Show all statistics including those whose value
is 0.
--periodic sleep_ms Run in a loop, polling every sleep_ms
milliseconds.
Requires root privilege to access pagemap and kpageflags.
--8<--
Example command to summarise fully and partially mapped THPs and 64K
contiguous blocks over all VMAs in all processes in the system
(--inc-empty forces printing stats that are 0):
# ./thpmaps --cont 64K --rollup --inc-empty
--8<--
anon-thp-pmd-aligned-2048kB: 139264 kB ( 6%)
file-thp-pmd-aligned-2048kB: 0 kB ( 0%)
anon-thp-pte-aligned-16kB: 0 kB ( 0%)
anon-thp-pte-aligned-32kB: 0 kB ( 0%)
anon-thp-pte-aligned-64kB: 72256 kB ( 3%)
anon-thp-pte-aligned-128kB: 0 kB ( 0%)
anon-thp-pte-aligned-256kB: 0 kB ( 0%)
anon-thp-pte-aligned-512kB: 0 kB ( 0%)
anon-thp-pte-aligned-1024kB: 0 kB ( 0%)
anon-thp-pte-aligned-2048kB: 0 kB ( 0%)
anon-thp-pte-unaligned-16kB: 0 kB ( 0%)
anon-thp-pte-unaligned-32kB: 0 kB ( 0%)
anon-thp-pte-unaligned-64kB: 0 kB ( 0%)
anon-thp-pte-unaligned-128kB: 0 kB ( 0%)
anon-thp-pte-unaligned-256kB: 0 kB ( 0%)
anon-thp-pte-unaligned-512kB: 0 kB ( 0%)
anon-thp-pte-unaligned-1024kB: 0 kB ( 0%)
anon-thp-pte-unaligned-2048kB: 0 kB ( 0%)
anon-thp-pte-partial: 63232 kB ( 3%)
file-thp-pte-aligned-16kB: 809024 kB (47%)
file-thp-pte-aligned-32kB: 43168 kB ( 3%)
file-thp-pte-aligned-64kB: 98496 kB ( 6%)
file-thp-pte-aligned-128kB: 17536 kB ( 1%)
file-thp-pte-aligned-256kB: 0 kB ( 0%)
file-thp-pte-aligned-512kB: 0 kB ( 0%)
file-thp-pte-aligned-1024kB: 0 kB ( 0%)
file-thp-pte-aligned-2048kB: 0 kB ( 0%)
file-thp-pte-unaligned-16kB: 21712 kB ( 1%)
file-thp-pte-unaligned-32kB: 704 kB ( 0%)
file-thp-pte-unaligned-64kB: 896 kB ( 0%)
file-thp-pte-unaligned-128kB: 44928 kB ( 3%)
file-thp-pte-unaligned-256kB: 0 kB ( 0%)
file-thp-pte-unaligned-512kB: 0 kB ( 0%)
file-thp-pte-unaligned-1024kB: 0 kB ( 0%)
file-thp-pte-unaligned-2048kB: 0 kB ( 0%)
file-thp-pte-partial: 9252 kB ( 1%)
anon-cont-pmd-aligned-64kB: 139264 kB ( 6%)
file-cont-pmd-aligned-64kB: 0 kB ( 0%)
anon-cont-pte-aligned-64kB: 100672 kB ( 4%)
file-cont-pte-aligned-64kB: 161856 kB ( 9%)
--8<--
Link: https://lkml.kernel.org/r/20240116141235.960842-1-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Barry Song <v-songbaohua@oppo.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Zenghui Yu <yuzenghui@huawei.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Current release - regressions:
- af_unix: fix another unix GC hangup
Previous releases - regressions:
- core: fix a possible AF_UNIX deadlock
- bpf: fix NULL pointer dereference in sk_psock_verdict_data_ready()
- netfilter: nft_flow_offload: release dst in case direct xmit path is used
- bridge: switchdev: ensure MDB events are delivered exactly once
- l2tp: pass correct message length to ip6_append_data
- dccp/tcp: unhash sk from ehash for tb2 alloc failure after check_estalblished()
- tls: fixes for record type handling with PEEK
- devlink: fix possible use-after-free and memory leaks in devlink_init()
Previous releases - always broken:
- bpf: fix an oops when attempting to read the vsyscall
page through bpf_probe_read_kernel
- sched: act_mirred: use the backlog for mirred ingress
- netfilter: nft_flow_offload: fix dst refcount underflow
- ipv6: sr: fix possible use-after-free and null-ptr-deref
- mptcp: fix several data races
- phonet: take correct lock to peek at the RX queue
Misc:
- handful of fixes and reliability improvements for selftests
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=eUOc
-----END PGP SIGNATURE-----
Merge tag 'net-6.8.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf and netfilter.
Current release - regressions:
- af_unix: fix another unix GC hangup
Previous releases - regressions:
- core: fix a possible AF_UNIX deadlock
- bpf: fix NULL pointer dereference in sk_psock_verdict_data_ready()
- netfilter: nft_flow_offload: release dst in case direct xmit path
is used
- bridge: switchdev: ensure MDB events are delivered exactly once
- l2tp: pass correct message length to ip6_append_data
- dccp/tcp: unhash sk from ehash for tb2 alloc failure after
check_estalblished()
- tls: fixes for record type handling with PEEK
- devlink: fix possible use-after-free and memory leaks in
devlink_init()
Previous releases - always broken:
- bpf: fix an oops when attempting to read the vsyscall page through
bpf_probe_read_kernel
- sched: act_mirred: use the backlog for mirred ingress
- netfilter: nft_flow_offload: fix dst refcount underflow
- ipv6: sr: fix possible use-after-free and null-ptr-deref
- mptcp: fix several data races
- phonet: take correct lock to peek at the RX queue
Misc:
- handful of fixes and reliability improvements for selftests"
* tag 'net-6.8.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
l2tp: pass correct message length to ip6_append_data
net: phy: realtek: Fix rtl8211f_config_init() for RTL8211F(D)(I)-VD-CG PHY
selftests: ioam: refactoring to align with the fix
Fix write to cloned skb in ipv6_hop_ioam()
phonet/pep: fix racy skb_queue_empty() use
phonet: take correct lock to peek at the RX queue
net: sparx5: Add spinlock for frame transmission from CPU
net/sched: flower: Add lock protection when remove filter handle
devlink: fix port dump cmd type
net: stmmac: Fix EST offset for dwmac 5.10
tools: ynl: don't leak mcast_groups on init error
tools: ynl: make sure we always pass yarg to mnl_cb_run
net: mctp: put sock on tag allocation failure
netfilter: nf_tables: use kzalloc for hook allocation
netfilter: nf_tables: register hooks last when adding new chain/flowtable
netfilter: nft_flow_offload: release dst in case direct xmit path is used
netfilter: nft_flow_offload: reset dst in route object after setting up flow
netfilter: nf_tables: set dormant flag on hook register failure
selftests: tls: add test for peeking past a record of a different type
selftests: tls: add test for merging of same-type control messages
...
By default tests are forked, add an option (-p or --parallel) so that
the forked tests are all started in parallel and then their output
gathered serially. This is opt-in as running in parallel can cause
test flakes.
Rather than fork within the code, the start_command/finish_command
from libsubcmd are used. This changes how stderr and stdout are
handled. The child stderr and stdout are always read to avoid the
child blocking. If verbose is 1 (-v) then if the test fails the child
stdout and stderr are displayed. If the verbose is >1 (e.g. -vv) then
the stdout and stderr from the child are immediately displayed.
An unscientific test on my laptop shows the wall clock time for perf
test without parallel being 5 minutes 21 seconds and with parallel
(-p) being 1 minute 50 seconds.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221034155.1500118-9-irogers@google.com
Rather than special shell test logic, do a single pass to create an
array of test suites. Hold the shell test file name in the test suite
priv field. This makes the special shell test logic in builtin-test.c
redundant so remove it.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221034155.1500118-8-irogers@google.com
Avoid filename appending buffers by using openat, faccessat and
scandirat more widely. Turn the script's path back to a file name
using readlink from /proc/<pid>/fd/<fd>.
Read the script's description using api/io.h to avoid fdopen
conversions. Whilst reading perform additional sanity checks on the
script's contents.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221034155.1500118-7-irogers@google.com
builtin-test-list is primarily concerned with shell script
tests. Rename the file to better reflect this and add a missed header
guard.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221034155.1500118-6-irogers@google.com
Tools like perf fork tests in case they crash, but they don't want to
exec a full binary. Add an option to call a function rather than do an
exec. The child process exits with the result of the function call and
is passed the struct of the run_command, things like container_of can
then allow the child process function to determine additional
arguments.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221034155.1500118-5-irogers@google.com
perf test -vv Symbols is used to indentify symbols within the perf
binary. Add the -F flag so that the test command doesn't fork the test
before running. This removes a little overhead.
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221034155.1500118-4-irogers@google.com
scandirat is used during the printing of tracepoint events but may be
missing from certain libcs. Add a compatibility implementation that
uses the symlink of an fd in /proc as a path for the reliably present
scandir.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221034155.1500118-3-irogers@google.com
Scanning /proc is inherently racy. Scanning /proc/pid/task within that
is also racy as the pid can terminate. Rather than failing in
__thread_map__new_all_cpus, skip pids for such failures.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221034155.1500118-2-irogers@google.com
Correct the short description of the following events:
DCW_REQ, DCW_REQ_CHIP_HIT, DCW_REQ_DRAWER_HIT, DCW_REQ_IV,
DCW_ON_CHIP, DCW_ON_CHIP_IV, DCW_ON_CHIP_CHIP_HIT,
DCW_ON_CHIP_DRAWER_HIT, CW_ON_MODULE, DCW_ON_DRAWER,
DCW_OFF_DRAWER, IDCW_ON_MODULE_IV, IDCW_ON_MODULE_CHIP_HIT,
IDCW_ON_MODULE_DRAWER_HIT, IDCW_ON_DRAWER_IV, IDCW_ON_DRAWER_CHIP_HIT,
IDCW_ON_DRAWER_DRAWER_HIT, IDCW_OFF_DRAWER_IV, IDCW_OFF_DRAWER_CHIP_HIT,
IDCW_OFF_DRAWER_DRAWER_HIT, ICW_REQ, ICW_REQ_IV, CW_REQ_CHIP_HIT,
ICW_REQ_DRAWER_HIT, ICW_ON_CHIP, ICW_ON_CHIP_IV, ICW_ON_CHIP_CHIP_HIT,
ICW_ON_CHIP_DRAWER_HIT, ICW_ON_MODULE and ICW_OFF_DRAWER.
The second Cache should be L2-Cache.
Output before (display diff of the first four events)
# perf list -d
DCW_REQ
[Directory Write Level 1 Data Cache from Cache. Unit: cpum_cf]
DCW_REQ_CHIP_HIT
[Directory Write Level 1 Data Cache from Cache with Chip HP \
Hit. Unit: cpum_cf]
DCW_REQ_DRAWER_HIT
[Directory Write Level 1 Data Cache from Cache with Drawer \
HP Hit. Unit: cpum_cf]
DCW_REQ_IV
[Directory Write Level 1 Data Cache from Cache with Intervention. \
Unit: cpum_cf]
Output after:
# perf list -d
DCW_REQ
[Directory Write Level 1 Data Cache from L2-Cache. Unit: cpum_cf]
DCW_REQ_CHIP_HIT
[Directory Write Level 1 Data Cache from L2-Cache with Chip HP \
Hit. Unit: cpum_cf]
DCW_REQ_DRAWER_HIT
[Directory Write Level 1 Data Cache from L2-Cache with Drawer \
HP Hit. Unit: cpum_cf]
DCW_REQ_IV
[Directory Write Level 1 Data Cache from L2-Cache with \
Intervention. Unit: cpum_cf]
Fixes: 7f76b31130 ("perf list: Add IBM z16 event description for s390")
Reported-by: Andreas Krebbel <krebbel@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Andreas Krebbel <krebbel@linux.ibm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Cc: sumanthk@linux.ibm.com
Cc: svens@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221091908.1759083-1-tmricht@linux.ibm.com
Pass metric_expr and evsel rather than specific variables from the
struct, thereby reducing the number of arguments. This will enable
later fixes.
To reduce the size of the diff, local variables are added to match the
previous parameter names. This isn't done in the case of "name" as
evsel->name is more intention revealing. A whitespace issue is also
addressed.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Kaige Ye <ye@kaige.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221070754.4163916-1-irogers@google.com
This commit updates tcp_custom_syncookie.c:tcp_parse_option() to use
explicit packet offset (ctx->off) for packet access instead of ever
moving pointer (ctx->ptr), this reduces verification complexity:
- the tcp_parse_option() is passed as a callback to bpf_loop();
- suppose a checkpoint is created each time at function entry;
- the ctx->ptr is tracked by verifier as PTR_TO_PACKET;
- the ctx->ptr is incremented in tcp_parse_option(),
thus umax_value field tracked for it is incremented as well;
- on each next iteration of tcp_parse_option()
checkpoint from a previous iteration can't be reused
for state pruning, because PTR_TO_PACKET registers are
considered equivalent only if old->umax_value >= cur->umax_value;
- on the other hand, the ctx->off is a SCALAR,
subject to widen_imprecise_scalars();
- it's exact bounds are eventually forgotten and it is tracked as
unknown scalar at entry to tcp_parse_option();
- hence checkpoints created at the start of the function eventually
converge.
The change is similar to one applied in [0] to xdp_synproxy_kern.c.
Comparing before and after with veristat yields following results:
File Insns (A) Insns (B) Insns (DIFF)
------------------------------- --------- --------- -----------------
test_tcp_custom_syncookie.bpf.o 466657 12423 -454234 (-97.34%)
[0] commit 977bc146d4 ("selftests/bpf: track tcp payload offset as scalar in xdp_synproxy")
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240222150300.14909-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There is a selftest that checks for an (expected) error when an
invalid AR is specified, but not one that exercises the AR path.
Add a simple test that mirrors the vanilla write/read test while
providing an AR. An AR that contains zero will direct the CPU to
use the primary address space normally used anyway. AR[1] is
selected for this test because the host AR[1] is usually non-zero,
and KVM needs to correctly swap those values.
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20240220211211.3102609-3-farman@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
If the relevant capability (KVM_XEN_HVM_CONFIG_SHARED_INFO_HVA) is present
then re-map vcpu_info using the HVA part way through the tests to make sure
then there is no functional change.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20240215152916.1158-16-paul@xen.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Using the HVA of the shared_info page is more efficient, so if the
capability (KVM_XEN_HVM_CONFIG_SHARED_INFO_HVA) is present use that method
to do the mapping.
NOTE: Have the juggle_shinfo_state() thread map and unmap using both
GFN and HVA, to make sure the older mechanism is not broken.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20240215152916.1158-15-paul@xen.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
The config fragment doesn't follow the correct format to enable those
config options which make the config options getting missed while
merging with other configs.
➜ merge_config.sh -m .config tools/testing/selftests/iommu/config
Using .config as base
Merging tools/testing/selftests/iommu/config
➜ make olddefconfig
.config:5295:warning: unexpected data: CONFIG_IOMMUFD
.config:5296:warning: unexpected data: CONFIG_IOMMUFD_TEST
While at it, add CONFIG_FAULT_INJECTION as well which is needed for
CONFIG_IOMMUFD_TEST. If CONFIG_FAULT_INJECTION isn't present in base
config (such as x86 defconfig), CONFIG_IOMMUFD_TEST doesn't get enabled.
Fixes: 57f0988706 ("iommufd: Add a selftest")
Link: https://lore.kernel.org/r/20240222074934.71380-1-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When CONFIG_MCTP_FLOWS is enabled, outgoing skbs should have their
SKB_EXT_MCTP extension set for drivers to consume.
Add two tests for local-to-output routing that check for the flow
extensions: one for the simple single-packet case, and one for
fragmentation.
We now make MCTP_TEST select MCTP_FLOWS, so we always get coverage of
these flow tests. The tests are skippable if MCTP_FLOWS is (otherwise)
disabled, but that would need manual config tweaking.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
No point in checking again as this was already done by the caller.
Signed-off-by: Nikolay Borisov <nik.borisov@suse.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240222111636.2214523-3-nik.borisov@suse.com
It's pointless checking if a particular part of an instruction is
decoded before calling the routine responsible for decoding it as this
check is duplicated in the routines itself. Streamline the code by
removing the superfluous checks. No functional difference.
Signed-off-by: Nikolay Borisov <nik.borisov@suse.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240222111636.2214523-2-nik.borisov@suse.com
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZdaBCwAKCRDbK58LschI
g3EhAP0d+S18mNabiEGz8efnE2yz3XcFchJgjiRS8WjOv75GvQEA6/sWncFjbc8k
EqxPHmeJa19rWhQlFrmlyNQfLYGe4gY=
=VkOs
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-02-22
The following pull-request contains BPF updates for your *net* tree.
We've added 11 non-merge commits during the last 24 day(s) which contain
a total of 15 files changed, 217 insertions(+), 17 deletions(-).
The main changes are:
1) Fix a syzkaller-triggered oops when attempting to read the vsyscall
page through bpf_probe_read_kernel and friends, from Hou Tao.
2) Fix a kernel panic due to uninitialized iter position pointer in
bpf_iter_task, from Yafang Shao.
3) Fix a race between bpf_timer_cancel_and_free and bpf_timer_cancel,
from Martin KaFai Lau.
4) Fix a xsk warning in skb_add_rx_frag() (under CONFIG_DEBUG_NET)
due to incorrect truesize accounting, from Sebastian Andrzej Siewior.
5) Fix a NULL pointer dereference in sk_psock_verdict_data_ready,
from Shigeru Yoshida.
6) Fix a resolve_btfids warning when bpf_cpumask symbol cannot be
resolved, from Hari Bathini.
bpf-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: Fix NULL pointer dereference in sk_psock_verdict_data_ready()
selftests/bpf: Add negtive test cases for task iter
bpf: Fix an issue due to uninitialized bpf_iter_task
selftests/bpf: Test racing between bpf_timer_cancel_and_free and bpf_timer_cancel
bpf: Fix racing between bpf_timer_cancel_and_free and bpf_timer_cancel
selftest/bpf: Test the read of vsyscall page under x86-64
x86/mm: Disallow vsyscall page read for copy_from_kernel_nofault()
x86/mm: Move is_vsyscall_vaddr() into asm/vsyscall.h
bpf, scripts: Correct GPL license name
xsk: Add truesize to skb_add_rx_frag().
bpf: Fix warning for bpf_cpumask in verifier
====================
Link: https://lore.kernel.org/r/20240221231826.1404-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ioam6_parser uses a packet socket. After the fix to prevent writing to
cloned skb's, the receiver does not see its IOAM data anymore, which
makes input/forward ioam-selftests to fail. As a workaround,
ioam6_parser now uses an IPv6 raw socket and leverages ancillary data to
get hop-by-hop options. As a consequence, the hook is "after" the IOAM
data insertion by the receiver and all tests are working again.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Make sure to free the already-parsed mcast_groups if
we don't get an ack from the kernel when reading family info.
This is part of the ynl_sock_create() error path, so we won't
get a call to ynl_sock_destroy() to free them later.
Fixes: 86878f14d7 ("tools: ynl: user space helpers")
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240220161112.2735195-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is one common error handler in ynl - ynl_cb_error().
It expects priv to be a pointer to struct ynl_parse_arg AKA yarg.
To avoid potential crashes if we encounter a stray NLMSG_ERROR
always pass yarg as priv (or a struct which has it as the first
member).
ynl_cb_null() has a similar problem directly - it expects yarg
but priv passed by the caller is ys.
Found by code inspection.
Fixes: 86878f14d7 ("tools: ynl: user space helpers")
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240220161112.2735195-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace some goto statements with return statements so that unmap() is not
called on an undefined address. This change is made so that unmap() can
only be reached after mmap() is called (and the address mentioned is
defined). Returning MAP_FAILED seems acceptable since client code checks
for this value.
Link: https://lkml.kernel.org/r/20240105202401.28851-1-inwardvessel@gmail.com
Fixes: 42096aa24b ("selftest/mm: ksm_functional_tests: test in mmap_and_merge_range() if anything got merged")
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The test of linking process creates several intermediate files.
Remove them once the build is over.
This reduces the number of files in selftests/bpf/ directory
from ~4400 to ~2600.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240220231102.49090-1-alexei.starovoitov@gmail.com
While we have test coverage for the ptrace interface in our selftests
the current programs have a number of gaps. The testing is done per
regset so does not cover interactions and at no point do any of the
tests actually run the traced processes meaning that there is no
validation that anything we read or write corresponds to register values
the process actually sees. Let's add a new program which attempts to cover
these gaps.
Each test we do performs a single ptrace write. For each test we generate
some random initial register data in memory and then fork() and trace a
child. The child will load the generated data into the registers then
trigger a breakpoint. The parent waits for the breakpoint then reads the
entire child register state via ptrace, verifying that the values expected
were actually loaded by the child. It then does the write being tested
and resumes the child. Once resumed the child saves the register state
it sees to memory and executes another breakpoint. The parent uses
process_vm_readv() to get these values from the child and verifies that
the values were as expected before cleaning up the child.
We generate configurations with combinations of vector lengths and SVCR
values and then try every ptrace write which will implement the
transition we generated. In order to control execution time (especially
in emulation) we only cover the minimum and maximum VL for each of SVE
and SME, this will ensure we generate both increasing and decreasing
changes in vector length. In order to provide a baseline test we also
check the case where we resume the child without doing a ptrace write.
In order to simplify the generation of the test count for kselftest we
will report but skip a substantial number of tests that can't actually
be expressed via a single ptrace write, several times more than we
actually run. This is noisy and will add some overhead but is very much
simpler so is probably worth the tradeoff.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240122-arm64-test-ptrace-regs-v1-1-0897f822d73e@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Although the fixed counter 3 and its exclusive pseudo slots event are
not supported by KVM yet, the architectural slots event is supported by
KVM and can be programmed on any GP counter. Thus add validation for this
architectural slots event.
Top-down slots event "counts the total number of available slots for an
unhalted logical processor, and increments by machine-width of the
narrowest pipeline as employed by the Top-down Microarchitecture
Analysis method."
As for the slot, it's an abstract concept which indicates how many
uops (decoded from instructions) can be processed simultaneously
(per cycle) on HW. In Top-down Microarchitecture Analysis (TMA) method,
the processor is divided into two parts, frond-end and back-end. Assume
there is a processor with classic 5-stage pipeline, fetch, decode,
execute, memory access and register writeback. The former 2 stages
(fetch/decode) are classified to frond-end and the latter 3 stages are
classified to back-end.
In modern Intel processors, a complicated instruction would be decoded
into several uops (micro-operations) and so these uops can be processed
simultaneously and then improve the performance. Thus, assume a
processor can decode and dispatch 4 uops in front-end and execute 4 uops
in back-end simultaneously (per-cycle), so the machine-width of this
processor is 4 and this processor has 4 topdown slots per-cycle.
If a slot is spare and can be used to process a new upcoming uop, then
the slot is available, but if a uop occupies a slot for several cycles
and can't be retired (maybe blocked by memory access), then this slot is
stall and unavailable.
Considering the testing instruction sequence can't be macro-fused on x86
platforms, the measured slots count should not be less than
NUM_INSNS_RETIRED. Thus assert the slots count against NUM_INSNS_RETIRED.
pmu_counters_test passed with this patch on Intel Sapphire Rapids.
About the more information about TMA method, please refer the below link.
https://www.intel.com/content/www/us/en/docs/vtune-profiler/cookbook/2023-0/top-down-microarchitecture-analysis-method.html
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240218043003.2424683-1-dapeng1.mi@linux.intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The second "new features" pull request for v6.9. Lots of iwlwifi and
stack changes this time. And naturally smaller changes to other drivers.
We also twice merged wireless into wireless-next to avoid conflicts
between the trees.
Major changes:
stack
* mac80211: negotiated TTLM request support
* SPP A-MSDU support
* mac80211: wider bandwidth OFDMA config support
iwlwifi
* kunit tests
* bump FW API to 89 for AX/BZ/SC devices
* enable SPP A-MSDUs
* support for new devices
ath12k
* refactoring in preparation for Multi-Link Operation (MLO) support
* 1024 Block Ack window size support
* provide firmware wmi logs via a trace event
ath11k
* 36 bit DMA mask support
* support 6 GHz station power modes: Low Power Indoor (LPI), Standard
Power) SP and Very Low Power (VLP)
rtl8xxxu
* TP-Link TL-WN823N V2 support
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmXU2PgRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuzZAf+NsvOkkhIoMG3rYmqli9ELEgupBIEoTwo
2favVGBbLOPIlvUJab3ZZ8Bsntpk3deRmISN27whNm5B3+36c7DKn3aYauVwUNs2
Qb99f3HXkGZQJ8DdKLZMviXXMgKfXzpVISwzD7HdV/GhkVX4LZ/MFzv1zrvLAC/J
LN5K6xKUqbgRJ1kAWbEoJpRCzNtKwx9GHAsO1vhL69yjBAqKkHivV9LE+BNjoXEz
g/LD0z05JqWDyxJ7yud3+DiBlZtvpmK9oa9gpWnuF8sdvkywyBdP/ipfDDLgbCzY
vKF1IUy5GNJSt5+AQS+zO0a8HrwzHR+XG8w5sCEKpjh3Nj0cxtFJ5w==
=Bnyy
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.9
The second "new features" pull request for v6.9. Lots of iwlwifi and
stack changes this time. And naturally smaller changes to other drivers.
We also twice merged wireless into wireless-next to avoid conflicts
between the trees.
Major changes:
stack
* mac80211: negotiated TTLM request support
* SPP A-MSDU support
* mac80211: wider bandwidth OFDMA config support
iwlwifi
* kunit tests
* bump FW API to 89 for AX/BZ/SC devices
* enable SPP A-MSDUs
* support for new devices
ath12k
* refactoring in preparation for Multi-Link Operation (MLO) support
* 1024 Block Ack window size support
* provide firmware wmi logs via a trace event
ath11k
* 36 bit DMA mask support
* support 6 GHz station power modes: Low Power Indoor (LPI), Standard
Power) SP and Very Low Power (VLP)
rtl8xxxu
* TP-Link TL-WN823N V2 support
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
On a 8-socket server the TSC is wrongly marked as 'unstable' and disabled
during boot time on about one out of 120 boot attempts:
clocksource: timekeeping watchdog on CPU227: wd-tsc-wd excessive read-back delay of 153560ns vs. limit of 125000ns,
wd-wd read-back delay only 11440ns, attempt 3, marking tsc unstable
tsc: Marking TSC unstable due to clocksource watchdog
TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
sched_clock: Marking unstable (119294969739, 159204297)<-(125446229205, -5992055152)
clocksource: Checking clocksource tsc synchronization from CPU 319 to CPUs 0,99,136,180,210,542,601,896.
clocksource: Switched to clocksource hpet
The reason is that for platform with a large number of CPUs, there are
sporadic big or huge read latencies while reading the watchog/clocksource
during boot or when system is under stress work load, and the frequency and
maximum value of the latency goes up with the number of online CPUs.
The cCurrent code already has logic to detect and filter such high latency
case by reading the watchdog twice and checking the two deltas. Due to the
randomness of the latency, there is a low probabilty that the first delta
(latency) is big, but the second delta is small and looks valid. The
watchdog code retries the readouts by default twice, which is not
necessarily sufficient for systems with a large number of CPUs.
There is a command line parameter 'max_cswd_read_retries' which allows to
increase the number of retries, but that's not user friendly as it needs to
be tweaked per system. As the number of required retries is proportional to
the number of online CPUs, this parameter can be calculated at runtime.
Scale and enlarge the number of retries according to the number of online
CPUs and remove the command line parameter completely.
[ tglx: Massaged change log and comments ]
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jin Wang <jin1.wang@intel.com>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20240221060859.1027450-1-feng.tang@intel.com
Now perf can show assembly instructions with libcapstone for x86, and the
capstone is better in general.
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: changbin.du@gmail.com
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240217074046.4100789-6-changbin.du@huawei.com
Currently, the instructions of samples are shown as raw hex strings
which are hard to read. x86 has a special option '--xed' to disassemble
the hex string via intel XED tool.
Here we use capstone as our disassembler engine to give more friendly
instructions. We select libcapstone because capstone can provide more
insn details. Perf will fallback to raw instructions if libcapstone is
not available.
The advantages compared to XED tool:
* Support arm, arm64, x86-32, x86_64 (more could be supported),
xed only for x86_64.
* Immediate address operands are shown as symbol+offs.
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: changbin.du@gmail.com
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240217074046.4100789-3-changbin.du@huawei.com
Later we will use libcapstone to disassemble instructions of samples.
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: changbin.du@gmail.com
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240217074046.4100789-2-changbin.du@huawei.com
There is a spelling mistake in a printed message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
While mq_perf_tests runs with the default kselftest timeout limit, which
is 45 seconds, the test takes about 60 seconds to complete on i3.metal
AWS instances. Hence, the test always times out. Increase the timeout
to 180 seconds.
Fixes: 852c8cbf34 ("selftests/kselftest/runner.sh: Add 45 second timeout per test")
Cc: <stable@vger.kernel.org> # 5.4.x
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a test to exercize cpu hotplug with the function tracer active to
ensure that sensitive functions in idle path are excluded from being
traced. This helps catch issues such as the one fixed by commit
4b3338aaa7 ("powerpc/ftrace: Fix stack teardown in ftrace_no_trace").
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Resolves a spelling error in the test log, preventing potential
confusion.
Signed-off-by: Vincenzo Mezzela <vincenzo.mezzela@gmail.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The 'workload_hint_test' test generates an object with the same name,
but there is no .gitignore file in the directory to add the object as
stated in the selftest documentation.
Add the missing .gitignore file and include 'workload_hint_test'.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The 'power_floor' test generates an object with the same name,
but there is no .gitignore file in the directory to add the object as
stated in the selftest documentation.
Add the missing .gitignore file and include 'power_floor'.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The 'uevent_filtering' test generates an object with the same name,
but there is no .gitignore file in the directory to add the object
as stated in the selftest documentation.
Add the missing .gitignore file and include 'uevent_filtering'.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a kselftest that verifies power supply properties from sysfs and
uevent. It checks whether they are present, readable and return valid
values.
This initial set of properties is not comprehensive, but rather the ones
that I was able to validate locally.
Co-developed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Similar to the C counterpart, keep track of the number of test cases in
the test plan and add a helper function to be called at the end of the
test to print the results and exit with the corresponding exit code.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Similar to the C counterpart, add a helper function to abort the
remainder of the test.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Similar to the C counterpart, add a helper function that runs a command
and passes or fails the test based on the result.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Similar to the C counterpart, add a helper to print a diagnostic
message.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Move bash helpers for outputting in KTAP format to the common selftests
folder. This allows kselftests other than the dt one to source the file
and make use of the helper functions.
Define pass, fail and skip codes in the same file too.
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
If HUGETLBFS is not enabled then the default_huge_page_size function will
return 0 and cause a divide by 0 error. Add a check to see if the huge page
size is 0 and skip the hugetlb tests if it is.
Link: https://lkml.kernel.org/r/20240205145055.3545806-2-terry.tritton@linaro.org
Fixes: 16a45b57cb ("selftests/mm: add framework for uffd-unit-test")
Signed-off-by: Terry Tritton <terry.tritton@linaro.org>
Cc: Peter Griffin <peter.griffin@linaro.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The typo in the description shows up in test logs and output.
This patch submission is part of my application to the Linux Foundation
mentorship program: Linux kernel Bug Fixing Spring Unpaid 2024.
Signed-off-by: Ali Zahraee <ahzahraee@gmail.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fix a typo in ftracetest script which is run when running the kselftests
for ftrace.
s/faii/fail
Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The futex_requeue_pi test program is run a number of times with different
options to provide multiple test cases. Currently every time it runs it
reports the result with a consistent string, meaning that automated systems
parsing the TAP output from a test run have difficulty in distinguishing
which test is which.
The parameters used for the test are already logged as part of the test
output, let's use the same format to roll them into the test name that we
use with KTAP so that automated systems can follow the results of the
individual cases that get run.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Incorporate a test case to assess the handling of invalid flags or
task__nullable parameters passed to bpf_iter_task_new(). Prior to the
preceding commit, this scenario could potentially trigger a kernel panic.
However, with the previous commit, this test case is expected to function
correctly.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240217114152.1623-3-laoar.shao@gmail.com
This selftest is based on a Alexei's test adopted from an internal
user to troubleshoot another bug. During this exercise, a separate
racing bug was discovered between bpf_timer_cancel_and_free
and bpf_timer_cancel. The details can be found in the previous
patch.
This patch is to add a selftest that can trigger the bug.
I can trigger the UAF everytime in my qemu setup with KASAN. The idea
is to have multiple user space threads running in a tight loop to exercise
both bpf_map_update_elem (which calls into bpf_timer_cancel_and_free)
and bpf_timer_cancel.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20240215211218.990808-2-martin.lau@linux.dev
If message contains unknown attribute and user passes
"--process-unknown" command line option, _decode() gets called with space
arg set to None. In that case, attr_space variable is not initialized
used which leads to following trace:
Traceback (most recent call last):
File "./tools/net/ynl/cli.py", line 77, in <module>
main()
File "./tools/net/ynl/cli.py", line 68, in main
reply = ynl.dump(args.dump, attrs)
^^^^^^^^^^^^^^^^^^^^^^^^^^
File "tools/net/ynl/lib/ynl.py", line 909, in dump
return self._op(method, vals, [], dump=True)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "tools/net/ynl/lib/ynl.py", line 894, in _op
rsp_msg = self._decode(decoded.raw_attrs, op.attr_set.name)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "tools/net/ynl/lib/ynl.py", line 639, in _decode
self._rsp_add(rsp, attr_name, None, self._decode_unknown(attr))
^^^^^^^^^^^^^^^^^^^^^^^^^^
File "tools/net/ynl/lib/ynl.py", line 569, in _decode_unknown
return self._decode(NlAttrs(attr.raw), None)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "tools/net/ynl/lib/ynl.py", line 630, in _decode
search_attrs = SpaceAttrs(attr_space, rsp, outer_attrs)
^^^^^^^^^^
UnboundLocalError: cannot access local variable 'attr_space' where it is not associated with a value
Fix this by moving search_attrs assignment under the if statement
above it to make sure attr_space is initialized.
Fixes: bf8b832374 ("tools/net/ynl: Support sub-messages in nested attribute spaces")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In bond priority testing, we set the primary interface to eth1 and add
eth0,1,2 to bond in serial. This is OK in normal times. But when in
debug kernel, the bridge port that eth0,1,2 connected would start
slowly (enter blocking, forwarding state), which caused the primary
interface down for a while after enslaving and active slave changed.
Here is a test log from Jakub's debug test[1].
[ 400.399070][ T50] br0: port 1(s0) entered disabled state
[ 400.400168][ T50] br0: port 4(s2) entered disabled state
[ 400.941504][ T2791] bond0: (slave eth0): making interface the new active one
[ 400.942603][ T2791] bond0: (slave eth0): Enslaving as an active interface with an up link
[ 400.943633][ T2766] br0: port 1(s0) entered blocking state
[ 400.944119][ T2766] br0: port 1(s0) entered forwarding state
[ 401.128792][ T2792] bond0: (slave eth1): making interface the new active one
[ 401.130771][ T2792] bond0: (slave eth1): Enslaving as an active interface with an up link
[ 401.131643][ T69] br0: port 2(s1) entered blocking state
[ 401.132067][ T69] br0: port 2(s1) entered forwarding state
[ 401.346201][ T2793] bond0: (slave eth2): Enslaving as a backup interface with an up link
[ 401.348414][ T50] br0: port 4(s2) entered blocking state
[ 401.348857][ T50] br0: port 4(s2) entered forwarding state
[ 401.519669][ T250] bond0: (slave eth0): link status definitely down, disabling slave
[ 401.526522][ T250] bond0: (slave eth1): link status definitely down, disabling slave
[ 401.526986][ T250] bond0: (slave eth2): making interface the new active one
[ 401.629470][ T250] bond0: (slave eth0): link status definitely up
[ 401.630089][ T250] bond0: (slave eth1): link status definitely up
[...]
# TEST: prio (active-backup ns_ip6_target primary_reselect 1) [FAIL]
# Current active slave is eth2 but not eth1
Fix it by setting active slave to primary slave specifically before
testing.
[1] https://netdev-3.bots.linux.dev/vmksft-bonding-dbg/results/464301/1-bond-options-sh/stdout
Fixes: 481b56e039 ("selftests: bonding: re-format bond option tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is important to have a unique (sub)test name in TAP, because some CI
environments drop tests with duplicated name.
Some 'cestab' subtests from the diag selftest had the same names, e.g.:
....chk 0 cestab
Now the previous value is taken, to have different names, e.g.:
....chk 2->0 cestab after flush
While at it, the 'after flush' info is added, similar to what is done
with the 'in use' subtests. Also inspired by these 'in use' subtests,
'many' is displayed instead of a large number:
many msk socket present [ ok ]
....chk many msk in use [ ok ]
....chk many cestab [ ok ]
....chk many->0 msk in use after flush [ ok ]
....chk many->0 cestab after flush [ ok ]
Fixes: 81ab772819 ("selftests: mptcp: diag: check CURRESTAB counters")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is important to have a unique (sub)test name in TAP, because some CI
environments drop tests with duplicated name.
Some 'in use' subtests from the diag selftest had the same names, e.g.:
chk 0 msk in use after flush
Now the previous value is taken, to have different names, e.g.:
chk 2->0 msk in use after flush
While at it, avoid repeating the full message, declare it once in the
helper.
Fixes: ce99025736 ("selftests: mptcp: diag: format subtests results in TAP")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is important to have a unique (sub)test name in TAP, because some CI
environments drop tests with duplicated names.
Some subtests from the userspace_pm selftest had the same names. That's
because different subflows are created (and deleted) between the same
pair of IP addresses.
Simply adding the destination port in the name is then enough to have
different names, because the destination port is always different.
Note that adding such info takes a bit more space, so we need to
increase a bit the width to print the name, simply to keep all the
'[ OK ]' aligned as before.
Fixes: f589234e1a ("selftests: mptcp: userspace_pm: format subtests results in TAP")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
