Now that io splitting is recorded prior to, or during, ->map IO
accounting can happen immediately rather than defer until after
bio splitting in dm_split_and_process_bio().
Remove the DM_IO_START_ACCT flag and also remove dm_io's map_task
member because there is no longer any need to wait for splitting to
occur before accounting.
Also move dm_io struct's 'flags' member to consolidate struct holes.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Now that bio_split() isn't used by DM's bio splitting, it is a bit
overkill to link dm_io into an hlist given there is only single dm_io
in the list.
Convert to using a single list for holding all dm_io instances
associated with this bio.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Currently each dm_io's reference counter is grabbed before calling
__map_bio(), this way isn't efficient since we can move this grabbing
to initialization time inside alloc_io().
Meantime it becomes typical async io reference counter model: one is
for submission side, the other is for completion side, and the io won't
be completed until both sides are done.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
dm_zone_map_bio() is only called from __map_bio in which the io's
reference is grabbed already, and the reference won't be released
until the bio is submitted, so not necessary to do it dm_zone_map_bio
any more.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
The current DM code (ab)uses late assignment of dm_io->orig_bio (after
__map_bio() returns and any bio splitting is complete) to indicate the
FS bio has been processed and can be accounted. This results in
awkward waiting until ->orig_bio is set in dm_submit_bio_remap().
Also the bio splitting was implemented using bio_split()+bio_chain()
-- a well-worn pattern but it requires bio cloning purely for the
benefit of more natural IO accounting. The bio_split() result was
stored in ->orig_bio to represent the mapped part of the original FS
bio.
DM has switched to the bdev based IO accounting interface. DM's IO
accounting can be implemented in terms of the original FS bio (now
stored early in ->orig_bio) via access to its sectors/bio_op. And
if/when splitting is needed, set a new DM_IO_WAS_SPLIT flag and use
new dm_io fields of .sector_offset & .sectors to allow IO accounting
for split bios _without_ needing to clone a new bio to store in
->orig_bio.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Co-developed-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
DM splits flush with data into empty flush followed by bio with data
payload, switch dm_io_acct() to use bdev_{start,end}_io_acct() to do
this accoiunting more naturally (rather than temporarily changing the
bio's bi_size).
This will allow DM to more easily account bios that are split (in
following commit).
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
All the other 4 parameters are retrieved from the 'dm_io' instance, so
it's not necessary to pass all four to dm_io_acct().
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
dm->orig_bio is always passed to __dm_start_io_acct and dm_end_io_acct,
so it isn't necessary to take one bio parameter for the two helpers.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Rename 'bi_size' to 'bio_sectors' given bi_size is being stored in
sectors. Also, use bio_sectors() rather than open-coding it.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Use jump_labels to further reduce cost of unlikely branches for zoned
block devices, dm-stats and swap_bios throttling.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
If a bio is marked REQ_NOWAIT optimize dm_submit_bio()'s dm_table RCU
usage to dm_{get,put}_live_table_fast.
DM core offers protection against blocking (via suspend) if REQ_NOWAIT.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Pull common DM_IO_ACCOUNTED check out to beginning of dm_start_io_acct.
Also, use dm_tio_is_normal (and move it to dm-core.h).
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
A bioset's per-cpu alloc cache may have broader utility in the future
but for now constrain it to being tightly coupled to QUEUE_FLAG_POLL.
Also change dm_io_complete() to use bio_clear_polled() so that it
properly clears all associated bio state on requeue.
This commit improves DM's hipri bio polling (REQ_POLLED) perf by
7 - 20% depending on the system.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Just use a non-zero max_discard_sectors as an indicator for discard
support, similar to what is done for write zeroes.
The only places where needs special attention is the RAID5 driver,
which must clear discard support for security reasons by default,
even if the default stacking rules would allow for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Jan Höppner <hoeppner@linux.ibm.com> [s390]
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-25-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The commit 92986f6b4c ("dm: use bio_clone_fast in alloc_io/alloc_tio")
removed bio_clone_fast() call from alloc_tio() when ci->io->tio is
available. In this case, ci->bio is not copied to ci->io->tio.clone.
This is fine since init_clone_info() sets same values to ci->bio and
ci->io->tio.clone.
However, when incoming bios have REQ_PREFLUSH flag, __send_empty_flush()
prepares a zero length bio on stack and set it to ci->bio. At this time,
ci->io->tio.clone still keeps non-zero length. When alloc_tio() chooses
this ci->io->tio.clone as the bio to map, it is passed to targets as
non-empty flush bio. It causes bio length check failure in dm-zoned and
unexpected operation such as dm_accept_partial_bio() call.
To avoid the non-empty flush bio, set zero length to ci->io->tio.clone
in __send_empty_flush().
Fixes: 92986f6b4c ("dm: use bio_clone_fast in alloc_io/alloc_tio")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
The intent behind commit e6fc9f62ce ("dm: flag clones created by
__send_duplicate_bios") was to formally disallow the use of
dm_accept_partial_bio() where it simply isn't possible -- due to
constraint that multiple bios cannot meaningfully update a shared
tio->len_ptr.
But that commit went too far and disallowed the case where "abormal"
IO (e.g. WRITE_ZEROES) is only using a single bio. Fix this by
not marking a dm_io with a single dm_target_io (and bio), that happens
to be created by __send_duplicate_bios, as DM_TIO_IS_DUPLICATE_BIO.
Also remove 'unsigned *len' parameter from alloc_multiple_bios().
This commit fixes a dm_accept_partial_bio() BUG_ON() with dm-zoned
when a WRITE_ZEROES bio is issued.
Fixes: 655f3aad7a ("dm: switch dm_target_io booleans over to proper flags")
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Expanded testing of DM's bio polling support (using more fio threads
to dm-linear ontop of null_blk) exposed the possibility for polled
bios to hang (repeatedly polling in io_uring) when null_blk responds
with BLK_STS_AGAIN (due to lack of resources):
1) io_complete_rw_iopoll() is called from blkdev_bio_end_io_async() to
notify kiocb is done, that is the completion interface between block
layer and io_uring
2) io_complete_rw_iopoll() is called from io_do_iopoll()
3) dm returns BLK_STS_AGAIN for one bio (on behalf of underlying
driver), then io_complete_rw_iopoll is called, but io_do_iopoll()
doesn't handle -EAGAIN at all (due to logic in io_rw_should_reissue)
4) reason for dm's BLK_STS_AGAIN is underlying null_blk driver ran out
of requests (easier to reproduce by setting low hw_queue_depth).
5) dm should handle BLK_STS_AGAIN for POLLED underlying IO, and may
retry in dm layer.
This fix adds REQ_POLLED specific BLK_STS_AGAIN handling to
dm_io_complete() that clears REQ_POLLED and requeues the bio to DM
using queue_io().
Fixes: b99fdcdc36 ("dm: support bio polling")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
[snitzer: revised header, reused dm_io_complete's REQ_POLLED case]
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
This series consists of the usual driver updates (qla2xxx, pm8001,
libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates
and bug fixes. The high blast radius core update is the removal of
write same, which affects block and several non-SCSI devices. The
other big change, which is more local, is the removal of the SCSI
pointer.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYjzDQyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQMYAQDEWUGV
6U0+736AHVtOfiMNfiRN79B1HfXVoHvemnPcTwD/UlndwFfy/3GGOtoZmqEpc73J
Ec1HDuUCE18H1H2QAh0=
=/Ty9
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (qla2xxx, pm8001,
libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates
and bug fixes.
The high blast radius core update is the removal of write same, which
affects block and several non-SCSI devices. The other big change,
which is more local, is the removal of the SCSI pointer"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (281 commits)
scsi: scsi_ioctl: Drop needless assignment in sg_io()
scsi: bsg: Drop needless assignment in scsi_bsg_sg_io_fn()
scsi: lpfc: Copyright updates for 14.2.0.0 patches
scsi: lpfc: Update lpfc version to 14.2.0.0
scsi: lpfc: SLI path split: Refactor BSG paths
scsi: lpfc: SLI path split: Refactor Abort paths
scsi: lpfc: SLI path split: Refactor SCSI paths
scsi: lpfc: SLI path split: Refactor CT paths
scsi: lpfc: SLI path split: Refactor misc ELS paths
scsi: lpfc: SLI path split: Refactor VMID paths
scsi: lpfc: SLI path split: Refactor FDISC paths
scsi: lpfc: SLI path split: Refactor LS_RJT paths
scsi: lpfc: SLI path split: Refactor LS_ACC paths
scsi: lpfc: SLI path split: Refactor the RSCN/SCR/RDF/EDC/FARPR paths
scsi: lpfc: SLI path split: Refactor PLOGI/PRLI/ADISC/LOGO paths
scsi: lpfc: SLI path split: Refactor base ELS paths and the FLOGI path
scsi: lpfc: SLI path split: Introduce lpfc_prep_wqe
scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4
scsi: lpfc: SLI path split: Refactor lpfc_iocbq
scsi: lpfc: Use kcalloc()
...
accounting with focus on fixing wildly inaccurate IO stats for
dm-crypt (and other DM targets that defer bio submission in their
own workqueues). End result is proper IO accounting, made possible
by targets being updated to use the new dm_submit_bio_remap()
interface.
- Add hipri bio polling support (REQ_POLLED) to bio-based DM.
- Reduce dm_io and dm_target_io structs so that a single dm_io (which
contains dm_target_io and first clone bio) weighs in at 256 bytes.
For reference the bio struct is 128 bytes.
- Various other small cleanups, fixes or improvements in DM core and
targets.
- Update MAINTAINERS with my kernel.org email address to allow
distinction between my "upstream" and "Red" Hats.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmI7ghIACgkQxSPxCi2d
A1q04wgAzaRu186WjfCO8MK0uyv3S52Rw1EsgYealAqoPwQJ9KkW2icvjtwRL+fJ
1+w6qE/Da6QdwXj9lGtp1XIXJFipNJSw3PSaE/tV2cXiBemZlzJ5vR6F6dfeYKmV
/sGas46H2l+aD4Xr7unUmcN/AYrNIFtnucClY3+DlJFPesXQQc9a/XmL9RX9MrN4
MS9wLkh/5QSG3zReEct/4GVmNSJAjFfLkkeFHtLN82jvvDmnszRT5+aJ06WkXeOz
OZmQfOPnJv5MnFUz9DOaRb/fTCoyxzxLnNM5Lt3jyFPk9Jf8Qz9TJ2rgskxsE83u
UsCD/Y/QAdDcrRVB5SS6+yx4AS6uSA==
=cinj
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Significant refactoring and fixing of how DM core does bio-based IO
accounting with focus on fixing wildly inaccurate IO stats for
dm-crypt (and other DM targets that defer bio submission in their own
workqueues). End result is proper IO accounting, made possible by
targets being updated to use the new dm_submit_bio_remap() interface.
- Add hipri bio polling support (REQ_POLLED) to bio-based DM.
- Reduce dm_io and dm_target_io structs so that a single dm_io (which
contains dm_target_io and first clone bio) weighs in at 256 bytes.
For reference the bio struct is 128 bytes.
- Various other small cleanups, fixes or improvements in DM core and
targets.
- Update MAINTAINERS with my kernel.org email address to allow
distinction between my "upstream" and "Red" Hats.
* tag 'for-5.18/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (46 commits)
dm: consolidate spinlocks in dm_io struct
dm: reduce size of dm_io and dm_target_io structs
dm: switch dm_target_io booleans over to proper flags
dm: switch dm_io booleans over to proper flags
dm: update email address in MAINTAINERS
dm: return void from __send_empty_flush
dm: factor out dm_io_complete
dm cache: use dm_submit_bio_remap
dm: simplify dm_sumbit_bio_remap interface
dm thin: use dm_submit_bio_remap
dm: add WARN_ON_ONCE to dm_submit_bio_remap
dm: support bio polling
block: add ->poll_bio to block_device_operations
dm mpath: use DMINFO instead of printk with KERN_INFO
dm: stop using bdevname
dm-zoned: remove the ->name field in struct dmz_dev
dm: remove unnecessary local variables in __bind
dm: requeue IO if mapping table not yet available
dm io: remove stale comment block for dm_io()
dm thin metadata: remove unused dm_thin_remove_block and __remove
...
No reason to have separate startio_lock and endio_lock given endio_lock
could be used during submission anyway.
This change leaves the dm_io struct weighing in at 256 bytes (down
from 272 bytes, so saves a cacheline).
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Remove the from_wq argument from dm_sumbit_bio_remap(). Eliminates the
need for dm_sumbit_bio_remap() callers to know whether they are
calling for a workqueue or from the original dm_submit_bio().
Add map_task to dm_io struct, record the map_task in alloc_io and
clear it after all target ->map() calls have completed. Update
dm_sumbit_bio_remap to check if 'current' matches io->map_task rather
than rely on passed 'from_rq' argument.
This change really simplifies the chore of porting each DM target to
using dm_sumbit_bio_remap() because there is no longer the risk of
programming error by not completely knowing all the different contexts
a particular method that calls dm_sumbit_bio_remap() might be used in.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If a target uses dm_submit_bio_remap() it should set
ti->accounts_remapped_io.
Also, switch dm_start_io_acct() WARN_ON to WARN_ON_ONCE.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Support bio polling (REQ_POLLED) in the following approach:
1) only support io polling on normal READ/WRITE, and other abnormal IOs
still fallback to IRQ mode, so the target io (and DM's clone bio) is
exactly inside the dm io.
2) hold one refcnt on io->io_count after submitting this dm bio with
REQ_POLLED
3) support dm native bio splitting, any dm io instance associated with
current bio will be added into one list which head is bio->bi_private
which will be recovered before ending this bio
4) implement .poll_bio() callback, call bio_poll() on the single target
bio inside the dm io which is retrieved via bio->bi_bio_drv_data; call
dm_io_dec_pending() after the target io is done in .poll_bio()
5) enable QUEUE_FLAG_POLL if all underlying queues enable QUEUE_FLAG_POLL,
which is based on Jeffle's previous patch.
These changes are good for a 30-35% IOPS improvement for polled IO.
For detailed test results please see (Jens, thanks for testing!):
https://listman.redhat.com/archives/dm-devel/2022-March/049868.html
or https://marc.info/?l=linux-block&m=164684246214700&w=2
Tested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
There are no more end-users of REQ_OP_WRITE_SAME left, so we can start
deleting it.
Link: https://lore.kernel.org/r/20220209082828.2629273-7-hch@lst.de
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update both bio-based and request-based DM to requeue IO if the
mapping table not available.
This race of IO being submitted before the DM device ready is so
narrow, yet possible for initial table load given that the DM device's
request_queue is created prior, that it best to requeue IO to handle
this unlikely case.
Reported-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Where possible, switch from early bio-based IO accounting (at the time
DM clones each incoming bio) to late IO accounting just before each
remapped bio is issued to underlying device via submit_bio_noacct().
Allows more precise bio-based IO accounting for DM targets that use
their own workqueues to perform additional processing of each bio in
conjunction with their DM_MAPIO_SUBMITTED return from their map
function. When a target is updated to use dm_submit_bio_remap() they
must also set ti->accounts_remapped_io to true.
Use xchg() in start_io_acct(), as suggested by Mikulas, to ensure each
IO is only started once. The xchg race only happens if
__send_duplicate_bios() sends multiple bios -- that case is reflected
via tio->is_duplicate_bio. Given the niche nature of this race, it is
best to avoid any xchg performance penalty for normal IO.
For IO that was never submitted with dm_bio_submit_remap(), but the
target completes the clone with bio_endio, accounting is started then
ended and pending_io counter decremented.
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Formally disallow dm_accept_partial_bio() on clones created by
__send_duplicate_bios() because their len_ptr points to a shared
unsigned int. __send_duplicate_bios() is only used for flush bios
and other "abnormal" bios (discards, writezeroes, etc). And
dm_accept_partial_bio() already didn't support flush bios.
Also refactor __send_changing_extent_only() to reflect it cannot fail.
As such __send_changing_extent_only() can update the clone_info before
__send_duplicate_bios() is called to fan-out __map_bio() calls.
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Prep for being able to defer trace_block_bio_remap() until when the
bio is remapped and submitted by the DM target.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Commit 8615cb65bd ("dm: remove useless loop in
__split_and_process_bio") showcased that we no longer loop.
Remove the bio_advance() in __split_and_process_bio() that was only
needed when looping was possible.
Similarly there is no need to advance the bio, using ci->sector
cursor, in __send_duplicate_bios().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The flush_bio in question was just initialized to be empty, so there
is no way bio_has_data() will return true. So remove stale BUG_ON().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Remove needless branching and indentation. Leaves code to catch
malformed op_is_zone_mgmt bios (they shouldn't have a payload).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Fold __clone_and_map_data_bio into its only caller.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Rename __split_and_process_bio to dm_split_and_process_bio.
Rename __split_and_process_non_flush to __split_and_process_bio.
Also fix a stale comment and whitespace.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
There is no need for dm_io_dec_pending() to copy dm_io fields
anymore now that DM provides its own pending_io counters again.
The race documented in commit d208b89401 ("dm: fix mempool NULL
pointer race when completing IO") no longer exists now that block
core's in_flight counters aren't used to signal all dm_io is
complete.
Also, rename {start,end}_io_acct to dm_{start,end}_io_acct.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
dm_stats_account_io()'s STAT_PRECISE_TIMESTAMPS support doesn't handle
the fact that with commit b879f915bc ("dm: properly fix redundant
bio-based IO accounting") io->start_time _may_ be in the past (meaning
the start_io_acct() was deferred until later).
Add a new dm_stats_recalc_precise_timestamps() helper that will
set/clear a new 'precise_timestamps' flag in the dm_stats struct based
on whether any configured stats enable STAT_PRECISE_TIMESTAMPS.
And update DM core's alloc_io() to use dm_stats_record_start() to set
stats_aux.duration_ns if stats->precise_timestamps is true.
Also, remove unused 'last_sector' and 'last_rw' members from the
dm_stats struct.
Fixes: b879f915bc ("dm: properly fix redundant bio-based IO accounting")
Cc: stable@vger.kernel.org
Co-developed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
DM handles a flush with data by first issuing an empty flush and then
once it completes the REQ_PREFLUSH flag is removed and the payload is
issued. The problem fixed by this commit is that both the empty flush
bio and the data payload will account the full extent of the data
payload.
Fix this by factoring out dm_io_acct() and having it wrap all IO
accounting to set the size of bio with REQ_PREFLUSH to 0, account the
IO, and then restore the original size.
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
