korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-12 05:24:12 +08:00
Code Issues Packages Projects Releases Wiki Activity
980,350 Commits 113 Branches 5,294 Tags 3.6 GiB
9bfaf9c729
Commit Graph

2484 Commits

Author SHA1 Message Date
Greg Kroah-Hartman
603ea288dc Merge 5.8-rc2 into usb-linus 
Felipe has based his patches on that tag, so update my usb-linus branch
to it as well so that I can pull his patches in here easier.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2020-06-26 16:51:14 +02:00
Dave Jiang
77522b2191 dmaengine: idxd: add leading / for sysfspath in ABI documentation 
Correct to standard convention. All sysfs paths seem to be missing
leading /.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/159225447176.68253.2922149693913698177.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
 2020-06-24 12:54:57 +05:30
Kranthi Kuntala
dacb12877d thunderbolt: Add support for on-board retimers 
USB4 spec specifies standard access to retimers (both on-board and
cable) through USB4 port sideband access. This makes it possible to
upgrade their firmware in the same way than we already do with the
routers.

This enumerates on-board retimers under each USB4 port when the link
comes up and adds them to the bus under the router the retimer belongs
to. Retimers are exposed in sysfs with name like <device>:<port>.<index>
where device is the router the retimer belongs to, port is the USB4 port
the retimer is connected to and index is the retimer index under that
port (starting from 1). This applies to the upstream USB4 port as well
so if there is on-board retimer between the port and the router it is
also added accordingly.

At this time we do not add cable retimers but there is no techincal
restriction to do so in the future if needed. It is not clear whether it
makes sense to upgrade their firmwares and at least Thunderbolt 3 cables
it has not been done outside of lab environments.

The sysfs interface is made to follow the router NVM upgrade to make it
easy to extend the existing userspace (fwupd) to handle these as well.

Signed-off-by: Kranthi Kuntala <kranthi.kuntala@intel.com>
Co-developed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
 2020-06-22 19:58:32 +03:00
Jason A. Donenfeld
625d344978 Revert "kernel/printk: add kmsg SEEK_CUR handling" 
This reverts commit 8ece3b3eb5.

This commit broke userspace. Bash uses ESPIPE to determine whether or
not the file should be read using "unbuffered I/O", which means reading
1 byte at a time instead of 128 bytes at a time. I used to use bash to
read through kmsg in a really quite nasty way:

    while read -t 0.1 -r line 2>/dev/null || [[ $? -ne 142 ]]; do
       echo "SARU $line"
    done < /dev/kmsg

This will show all lines that can fit into the 128 byte buffer, and skip
lines that don't. That's pretty awful, but at least it worked.

With this change, bash now tries to do 1-byte reads, which means it
skips all the lines, which is worse than before.

Now, I don't really care very much about this, and I'm already look for
a workaround. But I did just spend an hour trying to figure out why my
scripts were broken. Either way, it makes no difference to me personally
whether this is reverted, but it might be something to consider. If you
declare that "trying to read /dev/kmsg with bash is terminally stupid
anyway," I might be inclined to agree with you. But do note that bash
uses lseek(fd, 0, SEEK_CUR)==>ESPIPE to determine whether or not it's
reading from a pipe.

Cc: Bruno Meneguele <bmeneg@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-06-21 20:47:20 -07:00
Asutosh Das
f51853fc06 scsi: ufs: docs: Add WriteBooster documentation 
Adds sysfs documentation for WriteBooster entries.

Link: https://lore.kernel.org/r/1591723067-22998-1-git-send-email-asutoshd@codeaurora.org
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
 2020-06-19 23:09:15 -04:00
Fabio Estevam
3d19946b50 Documentation: ABI: usb: chipidea: Update Li Jun's e-mail 
The freescale.com e-mail domain is no longer active for quite some
time. Switch Li Jun's e-mail address to the NXP domain.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20200529104234.25136-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2020-06-18 10:40:56 +02:00
Vaibhav Jain
b791abf320 powerpc/papr_scm: Fetch nvdimm health information from PHYP 
Implement support for fetching nvdimm health information via
H_SCM_HEALTH hcall as documented in Ref[1]. The hcall returns a pair
of 64-bit bitmap, bitwise-and of which is then stored in
'struct papr_scm_priv' and subsequently partially exposed to
user-space via newly introduced dimm specific attribute
'papr/flags'. Since the hcall is costly, the health information is
cached and only re-queried, 60s after the previous successful hcall.

The patch also adds a  documentation text describing flags reported by
the the new sysfs attribute 'papr/flags' is also introduced at
Documentation/ABI/testing/sysfs-bus-papr-pmem.

[1] commit 58b278f568 ("powerpc: Provide initial documentation for
PAPR hcalls")

Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20200615124407.32596-4-vaibhav@linux.ibm.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
 2020-06-15 18:22:43 -07:00
Roman Sudarikov
bb42b3d397 perf/x86/intel/uncore: Expose an Uncore unit to IIO PMON mapping 
Current version supports a server line starting Intel® Xeon® Processor
Scalable Family and introduces mapping for IIO Uncore units only.
Other units can be added on demand.

IIO stack to PMON mapping is exposed through:
    /sys/devices/uncore_iio_<pmu_idx>/dieX
    where dieX is file which holds "Segment:Root Bus" for PCIe root port,
    which can be monitored by that IIO PMON block.

Details are explained in Documentation/ABI/testing/sysfs-devices-mapping

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Signed-off-by: Roman Sudarikov <roman.sudarikov@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lkml.kernel.org/r/20200601083543.30011-4-alexander.antonov@linux.intel.com
 2020-06-15 14:09:51 +02:00
Tomasz Duszynski
df16c33a40 iio: improve IIO_CONCENTRATION channel type description 
IIO_CONCENTRATION together with INFO_RAW specifier is used for reporting
raw concentrations of pollutants. Raw value should be meaningless
before being properly scaled. Because of that description shouldn't
mention raw value unit whatsoever.

Fix this by rephrasing existing description so it follows conventions
used throughout IIO ABI docs.

Fixes: 8ff6b3bc94 ("iio: chemical: Add IIO_CONCENTRATION channel type")
Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2020-06-14 11:49:53 +01:00
Linus Torvalds
3a2a875174 power supply and reset changes for the v5.8 series 
kobject:
  * Increase number of allowed uevent variables
 
 power-supply core:
  * Add power-supply type in uevent
  * Cleanup property handling in core
  * Make property and usb_type pointers const
  * Convert core power-supply DT binding to YAML
  * Cleanup HWMON code
  * Add new health status "calibration required"
  * Add new properties for manufacture date and
    capacity error margin
 
 battery drivers:
  * new cw2015 battery driver used by pine64 Pinebook Pro laptop
  * axp22: blacklist on Meegopad T02
  * sc27xx: support current/voltage reading
  * max17042: support time-to-empty reading
  * simple-battery: add more battery parameters
  * bq27xxx: convert DT binding document to YAML
  * sbs-battery: add TI BQ20Z65 support, fix technology property, convert
                 DT binding to YAML, add option to disable charger
 		broadcasts, add new properties: manufacture date,
 		capacity error margin, average current, charge current
 		and voltage and support calibration required health
 		status
  * misc. fixes
 
 charger drivers:
  * bq25890: cleanup, implement charge type, precharge current and input
             current limiting properties
  * bd70528: use new linear range helper library
  * bd99954: new charger driver
  * mp2629: new charger driver
  * misc. fixes
 
 reboot drivers:
  * oxnas-restart: introduce new driver
  * syscon-reboot: convert DT binding to YAML, add parent syscon device support
  * misc. fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAl7a2L0ACgkQ2O7X88g7
 +poAIg//caN2sHqOFEsukXWe1oft/X0IQeGNmlCnj55l1zGJ/x03Yn0GeKb0FZgM
 go+sfMaM/a6NNdmKhseLIsYFlhVBa2E7qW1nvaxgt66JKS+GXAHfE8LWVwazDJex
 rq0esXuegsqFdbCUth81YLk2H+0qwnhVVv/Urvv1RaE/woeFHAHL1cYfcFa+YDXm
 XRDT0W73YozslFkMnZMLBLyQzad3yVnNcnRYF3Dx0CMnUsjGfPjBlyk4RLPTcgUk
 8ChTvCcHRG7IhEtF0a1HUr3UjCy9rjwiqWIobQltnbEYImxY0LWkCVVr1EsNjeyr
 ikl3c4JfwmdlVCBCSPn294mPlGKu8DNBMLN1IgAuJHKW1GuQxd0Tcbd9OwF6VlVj
 WTFWp2GcoIjKQtOWKDeCqby+hoWhgclxTHUudo7FGTT0xBP9OWTKWDpDL18cZWd8
 dNCFMEI6MDMRtwL8+3ilLcnvSoMzyZ94TZmwii9toD3xSI7TMn7oVRuOlq1TkOEw
 ZuPS3QP6jBHm8NN9JEhLbrwradP+R8qpE/jpsnWiBDR6Jt7xx4W7W0xupq4GdHAl
 u0Lbh38/0bkTijeo9xoPe03KsSBV8HOr9Lf/QVW3zLcYcGKW17j8QTkes3a0bOs0
 DZHVCFeXuWNFa/tJxe6c+J+NsroLucTMwA3lBmlZhI/TPsG2vb8=
 =He9L
 -----END PGP SIGNATURE-----

Merge tag 'for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:
 "This time there are lots of changes. Quite a few changes to the core,
  lots of driver changes and one change to kobject core (with Ack from
  Greg).

  Summary:

  kobject:
   - Increase number of allowed uevent variables

  power-supply core:
   - Add power-supply type in uevent
   - Cleanup property handling in core
   - Make property and usb_type pointers const
   - Convert core power-supply DT binding to YAML
   - Cleanup HWMON code
   - Add new health status "calibration required"
   - Add new properties for manufacture date and capacity error margin

  battery drivers:
   - new cw2015 battery driver used by pine64 Pinebook Pro laptop
   - axp22: blacklist on Meegopad T02
   - sc27xx: support current/voltage reading
   - max17042: support time-to-empty reading
   - simple-battery: add more battery parameters
   - bq27xxx: convert DT binding document to YAML
   - sbs-battery: add TI BQ20Z65 support, fix technology property,
         convert DT binding to YAML, add option to disable charger
         broadcasts, add new properties: manufacture date, capacity
         error margin, average current, charge current and voltage and
         support calibration required health status
   - misc fixes

  charger drivers:
   - bq25890: cleanup, implement charge type, precharge current and
         input current limiting properties
   - bd70528: use new linear range helper library
   - bd99954: new charger driver
   - mp2629: new charger driver
   - misc fixes

  reboot drivers:
   - oxnas-restart: introduce new driver
   - syscon-reboot: convert DT binding to YAML, add parent syscon device
         support
   - misc fixes"

* tag 'for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (85 commits)
  power: supply: cw2015: Attach OF ID table to the driver
  power: reset: gpio-poweroff: add missing '\n' in dev_err()
  Revert "power: supply: sbs-battery: simplify read_read_string_data"
  Revert "power: supply: sbs-battery: add PEC support"
  dt-bindings: power: sbs-battery: Convert to yaml
  power: supply: sbs-battery: constify power-supply property array
  power: supply: sbs-battery: switch to i2c's probe_new
  power: supply: sbs-battery: switch from of_property_* to device_property_*
  power: supply: sbs-battery: add ability to disable charger broadcasts
  power: supply: sbs-battery: fix idle battery status
  power: supply: sbs-battery: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED support
  power: supply: sbs-battery: add MANUFACTURE_DATE support
  power: supply: sbs-battery: add POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT/VOLTAGE_MAX support
  power: supply: sbs-battery: Improve POWER_SUPPLY_PROP_TECHNOLOGY support
  power: supply: sbs-battery: add POWER_SUPPLY_PROP_CURRENT_AVG support
  power: supply: sbs-battery: add PEC support
  power: supply: sbs-battery: simplify read_read_string_data
  power: supply: sbs-battery: add POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN support
  power: supply: sbs-battery: Add TI BQ20Z65 support
  power: supply: core: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED
  ...
 2020-06-10 11:28:35 -07:00
Linus Torvalds
c90e7945e3 dmaengine updates for v5.8-rc1 
Bunch of updates to drivers like dmatest, dw-edma, ioat,
 mmp-tdma and k3-udma along with Renesas binding update to json-schema
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAl7fdVEACgkQfBQHDyUj
 g0e7PBAAhtKUb1hbx9OR9Wm4l0ZPgheip0Ai8zWjAXaM0au/OhGbYrss7ilRySYL
 ORUZqCp0/972w7oyHeHeNu2gxvbg8ouYCSTEftF4v78UPToYmoVYjUHVgxyLEeQ4
 i+B/K2sa96WYa0D64T3cDi7Vmf61ouB86Do7iIU8LZJuiS18Smyz5dfAUNCWZ7br
 rREDnJ6QPjoWMpdz/toYkYxChBWN7td8Zve1u0LUEFXt/OG6jpfv4Dg2jJ+j5E4V
 TGmV5p+7YVpuxmi1ab/MEOTWdG1rckhr85/+Fxy55V+BH8GaU5GEzeFg/5gIwypp
 it4dbPRq/fUPmuuWA+o2BYDC3ytJuFP/UQkCvxazT1OQS5xSHFHZXQYKOkRGZWln
 jNGML2CTTRe4JvRDU1rlLtQjSjlyF9Gt/5fRYkJQsJYByJhpvgp1+Fsuv8e2TFGX
 hhPH/RJJ04nhyHMjH6WBea+3BiUDHk9nxTPxeefu3tpF779vYmBXgO70thYt+J7d
 oJwegyfwJmgv7ZyItgQC+oo9AOVyByXrELuPgbFxHCnxNXjE8Xzu7lxjI3SX1zn2
 1tFX7yqJamR0s7EFwMDVBsG2SqUr/XKmruEUxt+VWIM/UjDrVvDPnqQ0koziRNV6
 dWClV/+QuOXKo349bDQUMjUp7gBub6lHCIJ2U428Y/pckgsOWac=
 =Jun4
 -----END PGP SIGNATURE-----

Merge tag 'dmaengine-5.8-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:
 "A fairly small dmaengine update which includes mostly driver updates
  (dmatest, dw-edma, ioat, mmp-tdma and k3-udma) along with Renesas
  binding update to json-schema"

* tag 'dmaengine-5.8-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (39 commits)
  dmaengine: imx-sdma: initialize all script addresses
  dmaengine: ti: k3-udma: Use proper return code in alloc_chan_resources
  dmaengine: ti: k3-udma: Remove udma_chan.in_ring_cnt
  dmaengine: ti: k3-udma: Add missing dma_sync call for rx flush descriptor
  dmaengine: at_xdmac: Replace zero-length array with flexible-array
  dmaengine: at_hdmac: Replace zero-length array with flexible-array
  dmaengine: qcom: bam_dma: Replace zero-length array with flexible-array
  dmaengine: ti: k3-udma: Use PTR_ERR_OR_ZERO() to simplify code
  dmaengine: moxart-dma: Drop pointless static qualifier in moxart_probe()
  dmaengine: sf-pdma: Simplify the error handling path in 'sf_pdma_probe()'
  dmaengine: qcom_hidma: use true,false for bool variable
  dmaengine: dw-edma: support local dma device transfer semantics
  dmaengine: Fix doc strings to satisfy validation script
  dmaengine: Include dmaengine.h into dmaengine.c
  dmaengine: dmatest: Describe members of struct dmatest_info
  dmaengine: dmatest: Describe members of struct dmatest_params
  dmaengine: dmatest: Allow negative timeout value to specify infinite wait
  Revert "dmaengine: dmatest: timeout value of -1 should specify infinite wait"
  dmaengine: stm32-dma: direct mode support through device tree
  dt-bindings: dma: add direct mode support through device tree in stm32-dma
  ...
 2020-06-10 11:03:04 -07:00
Linus Torvalds
42612e7763 f2fs-for-5.8-rc1 
In this round, we've added some knobs to enhance compression feature and harden
 testing environment. In addition, we've fixed several bugs reported from Android
 devices such as long discarding latency, device hanging during quota_sync, etc.
 
 Enhancement:
 - support lzo-rle algorithm
 - add two ioctls to release and reserve blocks for compression
 - support partial truncation/fiemap on compressed file
 - introduce sysfs entries to attach IO flags explicitly
 - add iostat trace point along with read io stat
 
 Bug fix:
 - fix long discard latency
 - flush quota data by f2fs_quota_sync correctly
 - fix to recover parent inode number for power-cut recovery
 - fix lz4/zstd output buffer budget
 - parse checkpoint mount option correctly
 - avoid inifinite loop to wait for flushing node/meta pages
 - manage discard space correctly
 
 And some refactoring and clean up patches were added.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE00UqedjCtOrGVvQiQBSofoJIUNIFAl7fojgACgkQQBSofoJI
 UNKaZQ//Rd6r7Z25SJkAoy+y/m6QDaKg4Ap1wR6+QmirR7HNxtpr3dXSVvmj4Xhu
 ZDJ3LHmerFiwR/X4zFPud+PAoBe3gJa2k7GT8q0g4YkgLy0hfX9PXt0t3I9F8vlk
 8m34j+hQaL9/3FBK4/PSG541vR/UUnwvu6t2pJMnz7rgnLej5I6yOIaoaihz7m+i
 k0ofK5ckuTNcZReAZ2tCIehQku7tDOBLdS5KxvBZBgRh0i5iSXXIa4ddvaMJdT/M
 WcjTZ6N8bFu0hCZ5hz9dyGGYo1XchQosLdLGhcEugsyxNp9Yuftyf5/Ie1wJNiEl
 ZsoRc15X7wfRPKKMMyDFljzPBPFiHr78p30uJ34bcYCu0j0CYi+gbKQztmEMZ2dy
 9M+sDG3jd5R7ACXrwS2ElSEDyLBnTaxbeSdCpErGjn/U19TLllbzhnMA9KR9elDI
 pEWgRc7DPmPbRZaStXMxIamf7pbmUSm0akAYbzGFvMHcSx4MXuQFICGK9t/mhSDm
 sO2b1Ir39yk65sVNdjFsnqDsi6jTPgrLSe3FY4eMhkn15OSiVGhcz7ddQMD7Fbuq
 WLpHFqER650I28i0EXh8bxzjkrj+aJQKhGcVbmwVS33MtKVfBdh4GfQMvS6MbeOM
 MsZ10E7Dr9ildKxqHP5SgLlggkl512lpj3+d6j0mUSSSUP2jtUw=
 =MiEC
 -----END PGP SIGNATURE-----

Merge tag 'f2fs-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs

Pull f2fs updates from Jaegeuk Kim:
 "In this round, we've added some knobs to enhance compression feature
  and harden testing environment. In addition, we've fixed several bugs
  reported from Android devices such as long discarding latency, device
  hanging during quota_sync, etc.

  Enhancements:
   - support lzo-rle algorithm
   - add two ioctls to release and reserve blocks for compression
   - support partial truncation/fiemap on compressed file
   - introduce sysfs entries to attach IO flags explicitly
   - add iostat trace point along with read io stat

  Bug fixes:
   - fix long discard latency
   - flush quota data by f2fs_quota_sync correctly
   - fix to recover parent inode number for power-cut recovery
   - fix lz4/zstd output buffer budget
   - parse checkpoint mount option correctly
   - avoid inifinite loop to wait for flushing node/meta pages
   - manage discard space correctly

  And some refactoring and clean up patches were added"

* tag 'f2fs-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (51 commits)
  f2fs: attach IO flags to the missing cases
  f2fs: add node_io_flag for bio flags likewise data_io_flag
  f2fs: remove unused parameter of f2fs_put_rpages_mapping()
  f2fs: handle readonly filesystem in f2fs_ioc_shutdown()
  f2fs: avoid utf8_strncasecmp() with unstable name
  f2fs: don't return vmalloc() memory from f2fs_kmalloc()
  f2fs: fix retry logic in f2fs_write_cache_pages()
  f2fs: fix wrong discard space
  f2fs: compress: don't compress any datas after cp stop
  f2fs: remove unneeded return value of __insert_discard_tree()
  f2fs: fix wrong value of tracepoint parameter
  f2fs: protect new segment allocation in expand_inode_data
  f2fs: code cleanup by removing ifdef macro surrounding
  f2fs: avoid inifinite loop to wait for flushing node pages at cp_error
  f2fs: flush dirty meta pages when flushing them
  f2fs: fix checkpoint=disable:%u%%
  f2fs: compress: fix zstd data corruption
  f2fs: add compressed/gc data read IO stat
  f2fs: fix potential use-after-free issue
  f2fs: compress: don't handle non-compressed data in workqueue
  ...
 2020-06-09 11:28:59 -07:00
Linus Torvalds
8b4d37db9a Merge branch 'x86/srbds' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 
Pull x86 srbds fixes from Thomas Gleixner:
 "The 9th episode of the dime novel "The performance killer" with the
  subtitle "Slow Randomizing Boosts Denial of Service".

  SRBDS is an MDS-like speculative side channel that can leak bits from
  the random number generator (RNG) across cores and threads. New
  microcode serializes the processor access during the execution of
  RDRAND and RDSEED. This ensures that the shared buffer is overwritten
  before it is released for reuse. This is equivalent to a full bus
  lock, which means that many threads running the RNG instructions in
  parallel have the same effect as the same amount of threads issuing a
  locked instruction targeting an address which requires locking of two
  cachelines at once.

  The mitigation support comes with the usual pile of unpleasant
  ingredients:

   - command line options

   - sysfs file

   - microcode checks

   - a list of vulnerable CPUs identified by model and stepping this
     time which requires stepping match support for the cpu match logic.

   - the inevitable slowdown of affected CPUs"

* branch 'x86/srbds' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/speculation: Add Ivy Bridge to affected list
  x86/speculation: Add SRBDS vulnerability and mitigation documentation
  x86/speculation: Add Special Register Buffer Data Sampling (SRBDS) mitigation
  x86/cpu: Add 'table' argument to cpu_matches()
 2020-06-09 09:30:21 -07:00
Jaegeuk Kim
32b6aba85c f2fs: add node_io_flag for bio flags likewise data_io_flag 
This patch adds another way to attach bio flags to node writes.

Description:   Give a way to attach REQ_META|FUA to node writes
               given temperature-based bits. Now the bits indicate:
               *      REQ_META     |      REQ_FUA      |
               *    5 |    4 |   3 |    2 |    1 |   0 |
               * Cold | Warm | Hot | Cold | Warm | Hot |

Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
 2020-06-08 20:37:54 -07:00
Linus Torvalds
9aa900c809 Char/Misc driver patches for 5.8-rc1 
Here is the large set of char/misc driver patches for 5.8-rc1
 
 Included in here are:
 	- habanalabs driver updates, loads
 	- mhi bus driver updates
 	- extcon driver updates
 	- clk driver updates (approved by the clock maintainer)
 	- firmware driver updates
 	- fpga driver updates
 	- gnss driver updates
 	- coresight driver updates
 	- interconnect driver updates
 	- parport driver updates (it's still alive!)
 	- nvmem driver updates
 	- soundwire driver updates
 	- visorbus driver updates
 	- w1 driver updates
 	- various misc driver updates
 
 In short, loads of different driver subsystem updates along with the
 drivers as well.
 
 All have been in linux-next for a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzkHw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yldOwCgus/DgpnI1UL4z+NdBxJrAXtkPmgAn2sgTUea
 i5RblCmcVMqvHaGtYkY+
 =tScN
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the large set of char/misc driver patches for 5.8-rc1

  Included in here are:

   - habanalabs driver updates, loads

   - mhi bus driver updates

   - extcon driver updates

   - clk driver updates (approved by the clock maintainer)

   - firmware driver updates

   - fpga driver updates

   - gnss driver updates

   - coresight driver updates

   - interconnect driver updates

   - parport driver updates (it's still alive!)

   - nvmem driver updates

   - soundwire driver updates

   - visorbus driver updates

   - w1 driver updates

   - various misc driver updates

  In short, loads of different driver subsystem updates along with the
  drivers as well.

  All have been in linux-next for a while with no reported issues"

* tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits)
  habanalabs: correctly cast u64 to void*
  habanalabs: initialize variable to default value
  extcon: arizona: Fix runtime PM imbalance on error
  extcon: max14577: Add proper dt-compatible strings
  extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()'
  extcon: remove redundant assignment to variable idx
  w1: omap-hdq: print dev_err if irq flags are not cleared
  w1: omap-hdq: fix interrupt handling which did show spurious timeouts
  w1: omap-hdq: fix return value to be -1 if there is a timeout
  w1: omap-hdq: cleanup to add missing newline for some dev_dbg
  /dev/mem: Revoke mappings when a driver claims the region
  misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages()
  misc: xilinx-sdfec: cleanup return value in xsdfec_table_write()
  misc: xilinx-sdfec: improve get_user_pages_fast() error handling
  nvmem: qfprom: remove incorrect write support
  habanalabs: handle MMU cache invalidation timeout
  habanalabs: don't allow hard reset with open processes
  habanalabs: GAUDI does not support soft-reset
  habanalabs: add print for soft reset due to event
  habanalabs: improve MMU cache invalidation code
  ...
 2020-06-07 10:59:32 -07:00
Linus Torvalds
80ef846e99 Staging/IIO driver patches for 5.8-rc1 
Here is the large set of staging and IIO driver changes for 5.8-rc1
 
 Nothing major, but a lot of new IIO drivers are included in here, along
 with other core iio cleanups and changes.
 
 On the staging driver front, again, nothing noticable.  No new deletions
 or additions, just a ton of tiny cleanups all over the tree done by a
 lot of different people.  Most coding style, but many actual real fixes
 and cleanups that are nice to see.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzoAQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ym9FwCgkW8WZJGnvHLjuuG8C01azCEh/KUAoJRji8jK
 4zCG8NxAPFsQ1QP2SZPq
 =jEyw
 -----END PGP SIGNATURE-----

Merge tag 'staging-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/IIO driver updates from Greg KH:
 "Here is the large set of staging and IIO driver changes for 5.8-rc1

  Nothing major, but a lot of new IIO drivers are included in here,
  along with other core iio cleanups and changes.

  On the staging driver front, again, nothing noticable. No new
  deletions or additions, just a ton of tiny cleanups all over the tree
  done by a lot of different people. Most coding style, but many actual
  real fixes and cleanups that are nice to see.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (618 commits)
  staging: rtl8723bs: Use common packet header constants
  staging: sm750fb: Add names to proc_setBLANK args
  staging: most: usb: init return value in default path of switch/case expression
  staging: vchiq: Get rid of VCHIQ_SERVICE_OPENEND callback reason
  staging: vchiq: move vchiq_release_message() into vchiq
  staging: vchi: Get rid of C++ guards
  staging: vchi: Get rid of not implemented function declarations
  staging: vchi: Get rid of vchiq_status_to_vchi()
  staging: vchi: Get rid of vchi_service_set_option()
  staging: vchi: Merge vchi_msg_queue() into vchi_queue_kernel_message()
  staging: vchiq: Move copy callback handling into vchiq
  staging: vchi: Get rid of vchi_queue_user_message()
  staging: vchi: Get rid of vchi_service_destroy()
  staging: most: usb: use function sysfs_streq
  staging: most: usb: add missing put_device calls
  staging: most: usb: use correct error codes
  staging: most: usb: replace code to calculate array index
  staging: most: usb: don't use error path to exit function on success
  staging: most: usb: move allocation of URB out of critical section
  staging: most: usb: return 0 instead of variable
  ...
 2020-06-07 10:45:08 -07:00
Linus Torvalds
242b233198 RDMA 5.8 merge window pull request 
A few large, long discussed works this time. The RNBD block driver has
 been posted for nearly two years now, and the removal of FMR has been a
 recurring discussion theme for a long time. The usual smattering of
 features and bug fixes.
 
 - Various small driver bugs fixes in rxe, mlx5, hfi1, and efa
 
 - Continuing driver cleanups in bnxt_re, hns
 
 - Big cleanup of mlx5 QP creation flows
 
 - More consistent use of src port and flow label when LAG is used and a
   mlx5 implementation
 
 - Additional set of cleanups for IB CM
 
 - 'RNBD' network block driver and target. This is a network block RDMA
   device specific to ionos's cloud environment. It brings strong multipath
   and resiliency capabilities.
 
 - Accelerated IPoIB for HFI1
 
 - QP/WQ/SRQ ioctl migration for uverbs, and support for multiple async fds
 
 - Support for exchanging the new IBTA defiend ECE data during RDMA CM
   exchanges
 
 - Removal of the very old and insecure FMR interface from all ULPs and
   drivers. FRWR should be preferred for at least a decade now.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAl7X/IwACgkQOG33FX4g
 mxp2uw/+MI2S/aXqEBvZfTT8yrkAwqYezS0VeTDnwH/T6UlTMDhHVN/2Ji3tbbX3
 FEKT1i2mnAL5RqUAL1lr9g4sG/bVozrpN46Ws5Lu9dTbIPLKTNPWDuLFQDUShKY7
 OyMI/bRx6anGnsOy20iiBqnrQbrrZj5TECgnmrkAl62QFdcl7aBWe/yYjy4CT11N
 ub+aBXBREN1F1pc0HIjd2tI+8gnZc+mNm1LVVDRH9Capun/pI26qDNh7e6QwGyIo
 n8ItraC8znLwv/nsUoTE7/JRcsTEe6vJI26PQmczZfNJs/4O65G7fZg0eSBseZYi
 qKf7Uwtb3qW0R7jRUMEgFY4DKXVAA0G2ph40HXBuzOSsqlT6HqYMO2wgG8pJkrTc
 qAjoSJGzfAHIsjxzxKI8wKuufCddjCm30VWWU7EKeriI6h1J0uPVqKkQMfYBTkik
 696eZSBycAVgwayOng3XaehiTxOL7qGMTjUpDjUR6UscbiPG919vP+QsbIUuBXdb
 YoddBQJdyGJiaCXv32ciJjo9bjPRRi/bII7Q5qzCNI2mi4ZVbudF4ffzyQvdHtNJ
 nGnpRXoPi7kMvUrKTMPWkFjj0R5/UsPszsA51zbxPydfgBe0Dlc2PrrIG8dlzYAp
 wbV0Lec+iJucKlt7EZtrjz1xOiOOaQt/5/cW1bWqL+wk2t6gAuY=
 =9zTe
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull rdma updates from Jason Gunthorpe:
 "A more active cycle than most of the recent past, with a few large,
  long discussed works this time.

  The RNBD block driver has been posted for nearly two years now, and
  flowing through RDMA due to it also introducing a new ULP.

  The removal of FMR has been a recurring discussion theme for a long
  time.

  And the usual smattering of features and bug fixes.

  Summary:

   - Various small driver bugs fixes in rxe, mlx5, hfi1, and efa

   - Continuing driver cleanups in bnxt_re, hns

   - Big cleanup of mlx5 QP creation flows

   - More consistent use of src port and flow label when LAG is used and
     a mlx5 implementation

   - Additional set of cleanups for IB CM

   - 'RNBD' network block driver and target. This is a network block
     RDMA device specific to ionos's cloud environment. It brings strong
     multipath and resiliency capabilities.

   - Accelerated IPoIB for HFI1

   - QP/WQ/SRQ ioctl migration for uverbs, and support for multiple
     async fds

   - Support for exchanging the new IBTA defiend ECE data during RDMA CM
     exchanges

   - Removal of the very old and insecure FMR interface from all ULPs
     and drivers. FRWR should be preferred for at least a decade now"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (247 commits)
  RDMA/cm: Spurious WARNING triggered in cm_destroy_id()
  RDMA/mlx5: Return ECE DC support
  RDMA/mlx5: Don't rely on FW to set zeros in ECE response
  RDMA/mlx5: Return an error if copy_to_user fails
  IB/hfi1: Use free_netdev() in hfi1_netdev_free()
  RDMA/hns: Uninitialized variable in modify_qp_init_to_rtr()
  RDMA/core: Move and rename trace_cm_id_create()
  IB/hfi1: Fix hfi1_netdev_rx_init() error handling
  RDMA: Remove 'max_map_per_fmr'
  RDMA: Remove 'max_fmr'
  RDMA/core: Remove FMR device ops
  RDMA/rdmavt: Remove FMR memory registration
  RDMA/mthca: Remove FMR support for memory registration
  RDMA/mlx4: Remove FMR support for memory registration
  RDMA/i40iw: Remove FMR leftovers
  RDMA/bnxt_re: Remove FMR leftovers
  RDMA/mlx5: Remove FMR leftovers
  RDMA/core: Remove FMR pool API
  RDMA/rds: Remove FMR support for memory registration
  RDMA/srp: Remove support for FMR memory registration
  ...
 2020-06-05 14:05:57 -07:00
Linus Torvalds
7ae77150d9 powerpc updates for 5.8 
- Support for userspace to send requests directly to the on-chip GZIP
    accelerator on Power9.
 
  - Rework of our lockless page table walking (__find_linux_pte()) to make it
    safe against parallel page table manipulations without relying on an IPI for
    serialisation.
 
  - A series of fixes & enhancements to make our machine check handling more
    robust.
 
  - Lots of plumbing to add support for "prefixed" (64-bit) instructions on
    Power10.
 
  - Support for using huge pages for the linear mapping on 8xx (32-bit).
 
  - Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound driver.
 
  - Removal of some obsolete 40x platforms and associated cruft.
 
  - Initial support for booting on Power10.
 
  - Lots of other small features, cleanups & fixes.
 
 Thanks to:
   Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Andrey Abramov,
   Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent Abali, Cédric Le
   Goater, Chen Zhou, Christian Zigotzky, Christophe JAILLET, Christophe Leroy,
   Dmitry Torokhov, Emmanuel Nicolet, Erhard F., Gautham R. Shenoy, Geoff Levand,
   George Spelvin, Greg Kurz, Gustavo A. R. Silva, Gustavo Walbon, Haren Myneni,
   Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Kees Cook, Leonardo
   Bras, Madhavan Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael
   Neuling, Michal Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao,
   Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram
   Pai, Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
   Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler, Wolfram
   Sang, Xiongfeng Wang.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl7aYZ8THG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgPiKD/9zNCuZLFMAFrIdbm0HlYA2RGYZFT75
 GUHsqYyei1pxA7PgM3KwJiXELVODsBv0eQbgNh1tbecKrxPRegN/cywd1KLjPZ7I
 v5/qweQP8MvR0RhzjbhvUcO0jq/f8u2LbJr5mUfVzjU6tAvrvcWo3oZqDElsekCS
 kgyOH3r1vZ2PLTMiGFhb0gWi2iqc+6BHU1AFCGPCMjB1Vu5d5+54VvZ/6lllGsOF
 yg9CBXmmVvQ+Bn6tH4zdEB78FYxnAIwBqlbmL79i5ca+HQJ0Sw6HuPRy9XYq35p6
 2EiXS4Wrgp7i7+1TN3HO362u5Onb8TSyQU7NS6yCFPoJ6JQxcJMBIw6mHhnXOPuZ
 CrjgcdwUMjx8uDoKmX1Epbfuex2w+AysW+4yBHPFiSgl3klKC3D0wi95mR485w2F
 rN8uzJtrDeFKcYZJG7IoB/cgFCCPKGf9HaXr8q0S/jBKMffx91ul3cfzlfdIXOCw
 FDNw/+ZX7UD6ddFEG12ZTO+vdL8yf1uCRT/DIZwUiDMIA0+M6F4nc7j3lfyZfoO1
 65f9UlhoLxScq7VH2fKH4UtZatO9cPID2z1CmiY4UbUIPtFDepSuYClgLF+Duf4b
 rkfxhKU0+Ja1zNH5XNc+L+Bc5/W4lFiJXz02dYIjtHoUpWkc1aToOETVwzggYFNM
 G3PXIBOI0jRgRw==
 =o0WU
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:

 - Support for userspace to send requests directly to the on-chip GZIP
   accelerator on Power9.

 - Rework of our lockless page table walking (__find_linux_pte()) to
   make it safe against parallel page table manipulations without
   relying on an IPI for serialisation.

 - A series of fixes & enhancements to make our machine check handling
   more robust.

 - Lots of plumbing to add support for "prefixed" (64-bit) instructions
   on Power10.

 - Support for using huge pages for the linear mapping on 8xx (32-bit).

 - Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound
   driver.

 - Removal of some obsolete 40x platforms and associated cruft.

 - Initial support for booting on Power10.

 - Lots of other small features, cleanups & fixes.

Thanks to: Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan,
Andrey Abramov, Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent
Abali, Cédric Le Goater, Chen Zhou, Christian Zigotzky, Christophe
JAILLET, Christophe Leroy, Dmitry Torokhov, Emmanuel Nicolet, Erhard F.,
Gautham R. Shenoy, Geoff Levand, George Spelvin, Greg Kurz, Gustavo A.
R. Silva, Gustavo Walbon, Haren Myneni, Hari Bathini, Joel Stanley,
Jordan Niethe, Kajol Jain, Kees Cook, Leonardo Bras, Madhavan
Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Michal
Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin,
Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram Pai,
Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler,
Wolfram Sang, Xiongfeng Wang.

* tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (299 commits)
  powerpc/pseries: Make vio and ibmebus initcalls pseries specific
  cxl: Remove dead Kconfig options
  powerpc: Add POWER10 architected mode
  powerpc/dt_cpu_ftrs: Add MMA feature
  powerpc/dt_cpu_ftrs: Enable Prefixed Instructions
  powerpc/dt_cpu_ftrs: Advertise support for ISA v3.1 if selected
  powerpc: Add support for ISA v3.1
  powerpc: Add new HWCAP bits
  powerpc/64s: Don't set FSCR bits in INIT_THREAD
  powerpc/64s: Save FSCR to init_task.thread.fscr after feature init
  powerpc/64s: Don't let DT CPU features set FSCR_DSCR
  powerpc/64s: Don't init FSCR_DSCR in __init_FSCR()
  powerpc/32s: Fix another build failure with CONFIG_PPC_KUAP_DEBUG
  powerpc/module_64: Use special stub for _mcount() with -mprofile-kernel
  powerpc/module_64: Simplify check for -mprofile-kernel ftrace relocations
  powerpc/module_64: Consolidate ftrace code
  powerpc/32: Disable KASAN with pages bigger than 16k
  powerpc/uaccess: Don't set KUEP by default on book3s/32
  powerpc/uaccess: Don't set KUAP by default on book3s/32
  powerpc/8xx: Reduce time spent in allow_user_access() and friends
  ...
 2020-06-05 12:39:30 -07:00
Linus Torvalds
512b7d37ee - Core Frameworks 
- Constify 'properties' attribute in core header file
 
  - New Drivers
    - Add support for Gateworks System Controller
    - Add support for MediaTek MT6358 PMIC
    - Add support for Mediatek MT6360 PMIC
    - Add support for Monolithic Power Systems MP2629 ADC and Battery charger
    - Rework Intel's SCU IPC collection
      - Eliminate near duplicate IPC functionality
      - Split out MFD related activities into a dedicated MFD driver
 
  - Fix-ups
    - Use new I2C API; htc-i2cpld
    - Remove superfluous code; sprd-sc27xx-spi
    - Improve error handling; stm32-timers
    - Device Tree additions/fixes; mt6397
    - Defer probe betterment; wm8994-core
    - Improve module handling; wm8994-core
    - Staticify; stpmic1
    - Trivial (spelling, formatting); tqmx86
 
  - Bug Fixes
    - Fix incorrect register/PCI IDs; intel-lpss-pci
    - Fix unbalanced Regulator API calls; wm8994-core
    - Fix double free(); wcd934x
    - Remove IRQ domain on failure; stmfx
    - Reset chip on resume; stmfx
    - Disable/enable IRQs on suspend/resume; stmfx
    - Do not use bulk writes on H/W which does not support them; max77620
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAl7XZXwACgkQUa+KL4f8
 d2FvCg/+M9ShYDptg1twDnCtMs9yAWpnTHVwTGeoAF4RkKapdAytlPfz2V8cr+jF
 5iiZM2iTRkkCdK9OQI+hPxRFXaRh3Ng6bgmzkp1VUGCT6VrcHCUmIpEcdOYnlzuY
 iLufFtXrcYGLSzfOn01jI25teeWfX4zuuNfeCWKESHAPHEZH2W5iep82s7GUP7c7
 a9IXOmQmvNYVIy7STswASI1qBcanc7MsDEN44fGZ5HbEONbFvogaQ26BUQJ+Ezc7
 YbV1QCvPFXYXvFD7S0oiAFhCEU0y1eWcrK8YUxVroGMt+Gx1FHWrDqUGFvJ5hE//
 itPr4ws9oiZHKn4xeItp7x8YVdxW6plor9h0j7NZkfVJV4/mjbPxQWpCvv3dHXKm
 NAbpeodEdxlrRdLI3HGiC6ZvIFjkUtrf+WFZoXS42F9BcxraSVxbK8LTaET4spja
 25VfswjIa3IUy1BB1eMl+Gd4LgcqIJ+FuSV6e4CCD7COhRQGEG3eyUOVNAC5Q/xI
 NcS9KhrDIayjPNZoNZPNHfiGxI+aWn4W71qMgx+t9wsDCMkjbN0xqcFaxoN/niti
 /GfaNZur/kjsewbg4oMjsjB1ytoG3saxFgWmL1XGGXJ3sxJaEyDa8iy8mhqVpj7m
 8C0g6uZiODveHRj4kn9hv1aR5AX1rTXADXrBJYvoxIU+43NWwhg=
 =746a
 -----END PGP SIGNATURE-----

Merge tag 'mfd-next-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Core Frameworks:
   - Constify 'properties' attribute in core header file

  New Drivers:
   - Add support for Gateworks System Controller
   - Add support for MediaTek MT6358 PMIC
   - Add support for Mediatek MT6360 PMIC
   - Add support for Monolithic Power Systems MP2629 ADC and Battery charger

  Fix-ups:
   - Use new I2C API in htc-i2cpld
   - Remove superfluous code in sprd-sc27xx-spi
   - Improve error handling in stm32-timers
   - Device Tree additions/fixes in mt6397
   - Defer probe betterment in wm8994-core
   - Improve module handling in wm8994-core
   - Staticify in stpmic1
   - Trivial (spelling, formatting) in tqmx86

  Bug Fixes:
   - Fix incorrect register/PCI IDs in intel-lpss-pci
   - Fix unbalanced Regulator API calls in wm8994-core
   - Fix double free() in wcd934x
   - Remove IRQ domain on failure in stmfx
   - Reset chip on resume in stmfx
   - Disable/enable IRQs on suspend/resume in stmfx
   - Do not use bulk writes on H/W which does not support them in max77620"

* tag 'mfd-next-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (29 commits)
  mfd: mt6360: Remove duplicate REGMAP_IRQ_REG_LINE() entry
  mfd: Add support for PMIC MT6360
  mfd: max77620: Use single-byte writes on MAX77620
  mfd: wcd934x: Drop kfree for memory allocated with devm_kzalloc
  mfd: stmfx: Disable IRQ in suspend to avoid spurious interrupt
  mfd: stmfx: Fix stmfx_irq_init error path
  mfd: stmfx: Reset chip on resume as supply was disabled
  mfd: wm8994: Silence warning about supplies during deferred probe
  mfd: wm8994: Fix unbalanced calls to regulator_bulk_disable()
  mfd: wm8994: Fix driver operation if loaded as modules
  dt-bindings: mfd: mediatek: Add MT6397 Pin Controller
  mfd: Constify properties in mfd_cell
  mfd: stm32-timers: Use dma_request_chan() instead dma_request_slave_channel()
  mfd: sprd: Remove unnecessary spi_bus_type setting
  mfd: intel-lpss: Update LPSS UART #2 PCI ID for Jasper Lake
  mfd: tqmx86: Fix a typo in MODULE_DESCRIPTION
  mfd: stpmic1: Make stpmic1_regmap_config static
  mfd: htc-i2cpld: Convert to use i2c_new_client_device()
  MAINTAINERS: Add entry for mp2629 Battery Charger driver
  power: supply: mp2629: Add impedance compensation config
  ...
 2020-06-04 10:38:42 -07:00
Linus Torvalds
a98f670e41 media updates for v5.8-rc1 
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAl7XUmwACgkQCF8+vY7k
 4RU4zg//fT32wiVAPHCCp+pDZVnWNeipXE1gnpqghd/qZXfzBPiLEC9sPS74VVkA
 jf1hhR33VZpKAKTPg/b074qhRZBywEOdHZnT/0CEE1oNB61shVOnyDYzLGSq95cO
 6V55ovbi5IOkrg0QEJbHpG5YHzt+pq5XeWOkqGNsHwla7N7iMGMVYfHepVVDWPnZ
 0wGYFF9cAJP+X/uxqkZLDVMA/K1I+QKh6vrj/qx53/eRt8VID3+i8ig3guk4PlUq
 7RLw5w/CywtNaGE5zaz7T3i2eoED71JHOTXi6RxdP1z8IDvELZ9mT95GQ+enlwqt
 AS6Ju1sV40wviHMv5prJWQjJkrrtYH3S907lIjwBpQLNGbh2+5crCd/6CwumkGgv
 1cCZ1dVmXpCe++9mU9AXmSkjsjGPStNcmHMOpc1Pwn9jUV3LQOOSDp8+RYdt1WHU
 Iw9cyM8NOpz5Mv/B1/ZPQ1gPb9lr1gE09XyUekxtAI/nl4nNHGWO8QDuX7Odfrv9
 8nfo14lk/p6XCTA8dsWJCgI5B1fgnqD4frHKWO9Uctppc/KBW41c8JpQUjBNlG/T
 MhtlGwYMVgSQxpQ6wK018JUAFoWkn1Sr0zMKRayqCnMjMLHsaMwE6kq+LgmRBqbB
 ersKV/9ZLYqCU1d6PhEVG6xUs6GsWdLcyhALlmHsddPSdpFXdf8=
 =KNAo
 -----END PGP SIGNATURE-----

Merge tag 'media/v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - Media documentation is now split into admin-guide, driver-api and
   userspace-api books (a longstanding request from Jon);

 - The media Kconfig was reorganized, in order to make easier to select
   drivers and their dependencies;

 - The testing drivers now has a separate directory;

 - added a new driver for Rockchip Video Decoder IP;

 - The atomisp staging driver was resurrected. It is meant to work with
   4 generations of cameras on Atom-based laptops, tablets and cell
   phones. So, it seems worth investing time to cleanup this driver and
   making it in good shape.

 - Added some V4L2 core ancillary routines to help with h264 codecs;

 - Added an ov2740 image sensor driver;

 - The si2157 gained support for Analog TV, which, in turn, added
   support for some cx231xx and cx23885 boards to also support analog
   standards;

 - Added some V4L2 controls (V4L2_CID_CAMERA_ORIENTATION and
   V4L2_CID_CAMERA_SENSOR_ROTATION) to help identifying where the camera
   is located at the device;

 - VIDIOC_ENUM_FMT was extended to support MC-centric devices;

 - Lots of drivers improvements and cleanups.

* tag 'media/v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (503 commits)
  media: Documentation: media: Refer to mbus format documentation from CSI-2 docs
  media: s5k5baf: Replace zero-length array with flexible-array
  media: i2c: imx219: Drop <linux/clk-provider.h> and <linux/clkdev.h>
  media: i2c: Add ov2740 image sensor driver
  media: ov8856: Implement sensor module revision identification
  media: ov8856: Add devicetree support
  media: dt-bindings: ov8856: Document YAML bindings
  media: dvb-usb: Add Cinergy S2 PCIe Dual Port support
  media: dvbdev: Fix tuner->demod media controller link
  media: dt-bindings: phy: phy-rockchip-dphy-rx0: move rockchip dphy rx0 bindings out of staging
  media: staging: dt-bindings: phy-rockchip-dphy-rx0: remove non-used reg property
  media: atomisp: unify the version for isp2401 a0 and b0 versions
  media: atomisp: update TODO with the current data
  media: atomisp: adjust some code at sh_css that could be broken
  media: atomisp: don't produce errs for ignored IRQs
  media: atomisp: print IRQ when debugging
  media: atomisp: isp_mmu: don't use kmem_cache
  media: atomisp: add a notice about possible leak resources
  media: atomisp: disable the dynamic and reserved pools
  media: atomisp: turn on camera before setting it
  ...
 2020-06-03 20:59:38 -07:00
Linus Torvalds
cb8e59cc87 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next 
Pull networking updates from David Miller:

 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
    Augusto von Dentz.

 2) Add GSO partial support to igc, from Sasha Neftin.

 3) Several cleanups and improvements to r8169 from Heiner Kallweit.

 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
    device self-test. From Andrew Lunn.

 5) Start moving away from custom driver versions, use the globally
    defined kernel version instead, from Leon Romanovsky.

 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.

 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.

 8) Add sriov and vf support to hinic, from Luo bin.

 9) Support Media Redundancy Protocol (MRP) in the bridging code, from
    Horatiu Vultur.

10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.

11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
    Dubroca. Also add ipv6 support for espintcp.

12) Lots of ReST conversions of the networking documentation, from Mauro
    Carvalho Chehab.

13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
    from Doug Berger.

14) Allow to dump cgroup id and filter by it in inet_diag code, from
    Dmitry Yakunin.

15) Add infrastructure to export netlink attribute policies to
    userspace, from Johannes Berg.

16) Several optimizations to sch_fq scheduler, from Eric Dumazet.

17) Fallback to the default qdisc if qdisc init fails because otherwise
    a packet scheduler init failure will make a device inoperative. From
    Jesper Dangaard Brouer.

18) Several RISCV bpf jit optimizations, from Luke Nelson.

19) Correct the return type of the ->ndo_start_xmit() method in several
    drivers, it's netdev_tx_t but many drivers were using
    'int'. From Yunjian Wang.

20) Add an ethtool interface for PHY master/slave config, from Oleksij
    Rempel.

21) Add BPF iterators, from Yonghang Song.

22) Add cable test infrastructure, including ethool interfaces, from
    Andrew Lunn. Marvell PHY driver is the first to support this
    facility.

23) Remove zero-length arrays all over, from Gustavo A. R. Silva.

24) Calculate and maintain an explicit frame size in XDP, from Jesper
    Dangaard Brouer.

25) Add CAP_BPF, from Alexei Starovoitov.

26) Support terse dumps in the packet scheduler, from Vlad Buslov.

27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.

28) Add devm_register_netdev(), from Bartosz Golaszewski.

29) Minimize qdisc resets, from Cong Wang.

30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
    eliminate set_fs/get_fs calls. From Christoph Hellwig.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
  selftests: net: ip_defrag: ignore EPERM
  net_failover: fixed rollback in net_failover_open()
  Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
  Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
  vmxnet3: allow rx flow hash ops only when rss is enabled
  hinic: add set_channels ethtool_ops support
  selftests/bpf: Add a default $(CXX) value
  tools/bpf: Don't use $(COMPILE.c)
  bpf, selftests: Use bpf_probe_read_kernel
  s390/bpf: Use bcr 0,%0 as tail call nop filler
  s390/bpf: Maintain 8-byte stack alignment
  selftests/bpf: Fix verifier test
  selftests/bpf: Fix sample_cnt shared between two threads
  bpf, selftests: Adapt cls_redirect to call csum_level helper
  bpf: Add csum_level helper for fixing up csum levels
  bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
  sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
  crypto/chtls: IPv6 support for inline TLS
  Crypto/chcr: Fixes a coccinile check error
  Crypto/chcr: Fixes compilations warnings
  ...
 2020-06-03 16:27:18 -07:00
Linus Torvalds
118d6e9829 ACPI updates for 5.8-rc1 
- Update the ACPICA code in the kernel to upstream revision
    20200430:
 
    * Move acpi_gbl_next_cmd_num definition (Erik Kaneda).
 
    * Ignore AE_ALREADY_EXISTS status in the disassembler when parsing
      create operators (Erik Kaneda).
 
    * Add status checks to the dispatcher (Erik Kaneda).
 
    * Fix required parameters for _NIG and _NIH (Erik Kaneda).
 
    * Make acpi_protocol_lengths static (Yue Haibing).
 
  - Fix ACPI table reference counting errors in several places, mostly
    in error code paths (Hanjun Guo).
 
  - Extend the Generic Event Device (GED) driver to support _Exx and
    _Lxx handler methods (Ard Biesheuvel).
 
  - Add new acpi_evaluate_reg() helper and modify the ACPI PCI hotplug
    code to use it (Hans de Goede).
 
  - Add new DPTF battery participant driver and make the DPFT power
    participant driver create more sysfs device attributes (Srinivas
    Pandruvada).
 
  - Improve the handling of memory failures in APEI (James Morse).
 
  - Add new blacklist entry for Acer TravelMate 5735Z to the backlight
    driver (Paul Menzel).
 
  - Add i2c address for thermal control to the PMIC driver (Mauro
    Carvalho Chehab).
 
  - Allow the ACPI processor idle driver to work on platforms with
    only one ACPI C-state present (Zhang Rui).
 
  - Fix kobject reference count leaks in error code paths in two
    places (Qiushi Wu).
 
  - Delete unused proc filename macros and make some symbols static
    (Pascal Terjan, Zheng Zengkai, Zou Wei).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl7VHb8SHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxVboQAIjYda2RhQANIlIvoEa+Qd2/FBd3HXgU
 Mv0LZ6y1xxxEZYeKne7zja1hzt5WetuZ1hZHGfg8YkXyrLqZGxfCIFbbhSA90BGG
 PGzFerGmOBNzB3I9SN6iQY7vSqoFHvQEV1PVh24d+aHWZqj2lnaRRq+GT54qbRLX
 /U3Hy5glFl8A/DCBP4cpoEjDr4IJHY68DathkDK2Ep2ybXV6B401uuqx8Su/OBd/
 MQmJTYI1UK/RYBXfdzS9TIZahnkxBbU1cnLFy08Ve2mawl5YsHPEbvm77a0yX2M6
 sOAerpgyzYNivAuOLpNIwhUZjpOY66nQuKAQaEl2cfRUkqt4nbmq7yDoH3d2MJLC
 /Ccz955rV2YyD1DtyV+PyT+HB+/EVwH/+UCZ+gsSbdHvOiwdFU6VaTc2eI1qq8K9
 4m5eEZFrAMPlvTzj/xVxr2Hfw1lbm23J5B5n7sM5HzYbT6MUWRQpvfV4zM3jTGz0
 rQd8JmcHVvZk/MV1mGrYHrN5TnGTLWpbS4Yv1lAQa6FP0N0NxzVud7KRfLKnCnJ1
 vh5yzW2fCYmVulJpuqxJDfXSqNV7n40CFrIewSp6nJRQXnWpImqHwwiA8fl51+hC
 fBL72Ey08EHGFnnNQqbebvNglsodRWJddBy43ppnMHtuLBA/2GVKYf2GihPbpEBq
 NHtX+Rd3vlWW
 =xH3i
 -----END PGP SIGNATURE-----

Merge tag 'acpi-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "These update the ACPICA code in the kernel to upstream revision
  20200430, fix several reference counting errors related to ACPI
  tables, add _Exx / _Lxx support to the GED driver, add a new
  acpi_evaluate_reg() helper, add new DPTF battery participant driver
  and extend the DPFT power participant driver, improve the handling of
  memory failures in the APEI code, add a blacklist entry to the
  backlight driver, update the PMIC driver and the processor idle
  driver, fix two kobject reference count leaks, and make a few janitory
  changes.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision 20200430:

      - Move acpi_gbl_next_cmd_num definition (Erik Kaneda).

      - Ignore AE_ALREADY_EXISTS status in the disassembler when parsing
        create operators (Erik Kaneda).

      - Add status checks to the dispatcher (Erik Kaneda).

      - Fix required parameters for _NIG and _NIH (Erik Kaneda).

      - Make acpi_protocol_lengths static (Yue Haibing).

   - Fix ACPI table reference counting errors in several places, mostly
     in error code paths (Hanjun Guo).

   - Extend the Generic Event Device (GED) driver to support _Exx and
     _Lxx handler methods (Ard Biesheuvel).

   - Add new acpi_evaluate_reg() helper and modify the ACPI PCI hotplug
     code to use it (Hans de Goede).

   - Add new DPTF battery participant driver and make the DPFT power
     participant driver create more sysfs device attributes (Srinivas
     Pandruvada).

   - Improve the handling of memory failures in APEI (James Morse).

   - Add new blacklist entry for Acer TravelMate 5735Z to the backlight
     driver (Paul Menzel).

   - Add i2c address for thermal control to the PMIC driver (Mauro
     Carvalho Chehab).

   - Allow the ACPI processor idle driver to work on platforms with only
     one ACPI C-state present (Zhang Rui).

   - Fix kobject reference count leaks in error code paths in two places
     (Qiushi Wu).

   - Delete unused proc filename macros and make some symbols static
     (Pascal Terjan, Zheng Zengkai, Zou Wei)"

* tag 'acpi-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
  ACPI: CPPC: Fix reference count leak in acpi_cppc_processor_probe()
  ACPI: sysfs: Fix reference count leak in acpi_sysfs_add_hotplug_profile()
  ACPI: GED: use correct trigger type field in _Exx / _Lxx handling
  ACPI: DPTF: Add battery participant driver
  ACPI: DPTF: Additional sysfs attributes for power participant driver
  ACPI: video: Use native backlight on Acer TravelMate 5735Z
  arm64: acpi: Make apei_claim_sea() synchronise with APEI's irq work
  ACPI: APEI: Kick the memory_failure() queue for synchronous errors
  mm/memory-failure: Add memory_failure_queue_kick()
  ACPI / PMIC: Add i2c address for thermal control
  ACPI: GED: add support for _Exx / _Lxx handler methods
  ACPI: Delete unused proc filename macros
  ACPI: hotplug: PCI: Use the new acpi_evaluate_reg() helper
  ACPI: utils: Add acpi_evaluate_reg() helper
  ACPI: debug: Make two functions static
  ACPI: sleep: Put the FACS table after using it
  ACPI: scan: Put SPCR and STAO table after using it
  ACPI: EC: Put the ACPI table after using it
  ACPI: APEI: Put the HEST table for error path
  ACPI: APEI: Put the error record serialization table for error path
  ...
 2020-06-02 13:25:52 -07:00
Linus Torvalds
355ba37d75 Power management updates for 5.8-rc1 
- Rework the system-wide PM driver flags to make them easier to
    understand and use and update their documentation (Rafael Wysocki,
    Alan Stern).
 
  - Allow cpuidle governors to be switched at run time regardless of
    the kernel configuration and update the related documentation
    accordingly (Hanjun Guo).
 
  - Improve the resume device handling in the user space hibernarion
    interface code (Domenico Andreoli).
 
  - Document the intel-speed-select sysfs interface (Srinivas
    Pandruvada).
 
  - Make the ACPI code handing suspend to idle print more debug
    messages to help diagnose issues with it (Rafael Wysocki).
 
  - Fix a helper routine in the cpufreq core and correct a typo in
    the struct cpufreq_driver kerneldoc comment (Rafael Wysocki, Wang
    Wenhu).
 
  - Update cpufreq drivers:
 
    * Make the intel_pstate driver start in the passive mode by
      default on systems without HWP (Rafael Wysocki).
 
    * Add i.MX7ULP support to the imx-cpufreq-dt driver and add
      i.MX7ULP to the cpufreq-dt-platdev blacklist (Peng Fan).
 
    * Convert the qoriq cpufreq driver to a platform one, make the
      platform code create a suitable device object for it and add
      platform dependencies to it (Mian Yousaf Kaukab, Geert
      Uytterhoeven).
 
    * Fix wrong compatible binding in the qcom driver (Ansuel Smith).
 
    * Build the omap driver by default for ARCH_OMAP2PLUS (Anders
      Roxell).
 
    * Add r8a7742 SoC support to the dt cpufreq driver (Lad Prabhakar).
 
  - Update cpuidle core and drivers:
 
    * Fix three reference count leaks in error code paths in the
      cpuidle core (Qiushi Wu).
 
    * Convert Qualcomm SPM to a generic cpuidle driver (Stephan
      Gerhold).
 
    * Fix up the execution order when entering a domain idle state in
      the PSCI driver (Ulf Hansson).
 
  - Fix a reference counting issue related to clock management and
    clean up two oddities in the PM-runtime framework (Rafael Wysocki,
    Andy Shevchenko).
 
  - Add ElkhartLake support to the Intel RAPL power capping driver
    and remove an unused local MSR definition from it (Jacob Pan,
    Sumeet Pawnikar).
 
  - Update devfreq core and drivers:
 
    * Replace strncpy() with strscpy() in the devfreq core and use
      lockdep asserts instead of manual checks for a locked mutex in
      it (Dmitry Osipenko, Krzysztof Kozlowski).
 
    * Add a generic imx bus scaling driver and make it register an
      interconnect device (Leonard Crestez, Gustavo A. R. Silva).
 
    * Make the cpufreq notifier in the tegra30 driver take boosting
      into account and delete an unuseful error message from that
      driver (Dmitry Osipenko, Markus Elfring).
 
  - Remove unneeded semicolon from the cpupower code (Zou Wei).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl7VGjwSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRx46gP/jGAXlddFEQswi6qUT3Cff0A9mb8CdcX
 dyKrjX4xxo/wtBIAwSN4achxrgse//ayo2dYTzWRDd31W9Azbv+5F+46XsDRz4hL
 pH29u/E66NMtFWnHCmt78NEJn0FzSa0YBC43ZzwFwKktCK9skYIpGN2z6iuXUBSX
 Q5GHqop3zvDsdKQFBGL62xvUw/AmOTPG7ohIZvqWBN2mbOqEqMcoFHT+aUF/NbLj
 +i14dvTH767eDZGRVASmXWQyljjaRWm+SIw4+m8zT1D1Y3d5IFObuMN+9RQl1Tif
 BYjkgJ2oDDMhCJLW7TBuJB+g7exiyaSQds3nMr2ZR+eZbJipICjU4eehNEKIUopU
 DM17tHQfnwZfS/7YbCx3vYQwLkNq37AJyXS9uqCAIFM+0n4xN4/mIVmgWYISLDTs
 1v9olFxtwMRNpjGGQWPJAO7ebB8Zz9qhQv7pIkSQEfwp93/SzvlVf4vvruTeFN9J
 qqG60cDumXWAm+s43eQHJNn5nOd5ocWv0FBpo/cxqKbzxFVWwdB42Cm0SY+rK2ID
 uHdnc2DJcK2c78UVbz3Cmk4272foJt2zxchqjFXXAZPLrOsFfzmti4B28VxGxjmP
 LG3MhH5sdbF4yl/1aSC1Bnrt+PV9Lus6ut/VKhjwIpw8cqiXgpwSbMoDoaBd9UMQ
 ubGz2rplGAtB
 =APdj
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These rework the system-wide PM driver flags, make runtime switching
  of cpuidle governors easier, improve the user space hibernation
  interface code, add intel-speed-select interface documentation, add
  more debug messages to the ACPI code handling suspend to idle, update
  the cpufreq core and drivers, fix a minor issue in the cpuidle core
  and update two cpuidle drivers, improve the PM-runtime framework,
  update the Intel RAPL power capping driver, update devfreq core and
  drivers, and clean up the cpupower utility.

  Specifics:

   - Rework the system-wide PM driver flags to make them easier to
     understand and use and update their documentation (Rafael Wysocki,
     Alan Stern).

   - Allow cpuidle governors to be switched at run time regardless of
     the kernel configuration and update the related documentation
     accordingly (Hanjun Guo).

   - Improve the resume device handling in the user space hibernarion
     interface code (Domenico Andreoli).

   - Document the intel-speed-select sysfs interface (Srinivas
     Pandruvada).

   - Make the ACPI code handing suspend to idle print more debug
     messages to help diagnose issues with it (Rafael Wysocki).

   - Fix a helper routine in the cpufreq core and correct a typo in the
     struct cpufreq_driver kerneldoc comment (Rafael Wysocki, Wang
     Wenhu).

   - Update cpufreq drivers:

      - Make the intel_pstate driver start in the passive mode by
        default on systems without HWP (Rafael Wysocki).

      - Add i.MX7ULP support to the imx-cpufreq-dt driver and add
        i.MX7ULP to the cpufreq-dt-platdev blacklist (Peng Fan).

      - Convert the qoriq cpufreq driver to a platform one, make the
        platform code create a suitable device object for it and add
        platform dependencies to it (Mian Yousaf Kaukab, Geert
        Uytterhoeven).

      - Fix wrong compatible binding in the qcom driver (Ansuel Smith).

      - Build the omap driver by default for ARCH_OMAP2PLUS (Anders
        Roxell).

      - Add r8a7742 SoC support to the dt cpufreq driver (Lad
        Prabhakar).

   - Update cpuidle core and drivers:

      - Fix three reference count leaks in error code paths in the
        cpuidle core (Qiushi Wu).

      - Convert Qualcomm SPM to a generic cpuidle driver (Stephan
        Gerhold).

      - Fix up the execution order when entering a domain idle state in
        the PSCI driver (Ulf Hansson).

   - Fix a reference counting issue related to clock management and
     clean up two oddities in the PM-runtime framework (Rafael Wysocki,
     Andy Shevchenko).

   - Add ElkhartLake support to the Intel RAPL power capping driver and
     remove an unused local MSR definition from it (Jacob Pan, Sumeet
     Pawnikar).

   - Update devfreq core and drivers:

      - Replace strncpy() with strscpy() in the devfreq core and use
        lockdep asserts instead of manual checks for a locked mutex in
        it (Dmitry Osipenko, Krzysztof Kozlowski).

      - Add a generic imx bus scaling driver and make it register an
        interconnect device (Leonard Crestez, Gustavo A. R. Silva).

      - Make the cpufreq notifier in the tegra30 driver take boosting
        into account and delete an unuseful error message from that
        driver (Dmitry Osipenko, Markus Elfring).

   - Remove unneeded semicolon from the cpupower code (Zou Wei)"

* tag 'pm-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (51 commits)
  cpuidle: Fix three reference count leaks
  PM: runtime: Replace pm_runtime_callbacks_present()
  PM / devfreq: Use lockdep asserts instead of manual checks for locked mutex
  PM / devfreq: imx-bus: Fix inconsistent IS_ERR and PTR_ERR
  PM / devfreq: Replace strncpy with strscpy
  PM / devfreq: imx: Register interconnect device
  PM / devfreq: Add generic imx bus scaling driver
  PM / devfreq: tegra30: Delete an error message in tegra_devfreq_probe()
  PM / devfreq: tegra30: Make CPUFreq notifier to take into account boosting
  PM: hibernate: Restrict writes to the resume device
  PM: runtime: clk: Fix clk_pm_runtime_get() error path
  cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver
  ACPI: EC: PM: s2idle: Extend GPE dispatching debug message
  ACPI: PM: s2idle: Print type of wakeup debug messages
  powercap: RAPL: remove unused local MSR define
  PM: runtime: Make clear what we do when conditions are wrong in rpm_suspend()
  Documentation: admin-guide: pm: Document intel-speed-select
  PM: hibernate: Split off snapshot dev option
  PM: hibernate: Incorporate concurrency handling
  Documentation: ABI: make current_governer_ro as a candidate for removal
  ...
 2020-06-02 13:17:23 -07:00
Linus Torvalds
a5a82e0a59 platform-drivers-x86 for v5.8-1 
* Add a support of  the media keys on the ASUS laptop UX325JA/UX425JA
 * ASUS WMI driver can now handle 2-in-1 models T100TA, T100CHI, T100HA, T200TA
 * Big refactoring of Intel SCU driver with Elkhart Lake support has been added
 * Slim Bootloarder firmware update signaling WMI driver has been added
 * Thinkpad ACPI driver can handle dual fan configuration on new P and X models
 * Touchscreen DMI driver has been extended to support
   - MP-man MPWIN895CL tablet
   - ONDA V891 v5 tablet
   - techBite Arc 11.6
   - Trekstor Twin 10.1
   - Trekstor Yourbook C11B
   - Vinga J116
 * Virtual Button driver got a few fixes to detect mode of 2-in-1 tablet models
 * Intel Speed Select tools update
 * Plenty of small cleanups here and there
 
 The following is an automated git shortlog grouped by driver:
 
 acerhdf:
  -  replace space by * in modalias
 
 New drivers:
  - Add Elkhart Lake SCU/PMC support
  - Add Slim Bootloader firmware update signaling driver
 
 asus-laptop:
  -  Drop duplicate check for led_classdev_unregister()
 
 asus-nb-wmi:
  -  Revert "Do not load on Asus T100TA and T200TA"
  -  Do not load on Asus T100TA and T200TA
 
 asus-wmi:
  -  Ignore WMI events with code 0x79
  -  Add support for SW_TABLET_MODE
  -  Move asus_wmi_input_init and _exit lower in the file
  -  Drop duplicate check for led_classdev_unregister()
  -  Reserve more space for struct bias_args
  -  remove redundant initialization of variable status
 
 dcdbas:
  -  Check SMBIOS for protected buffer address
 
 dell-laptop:
  -  don't register micmute LED if there is no token
 
 dell-wmi:
  -  Ignore keyboard attached / detached events
 
 device property:
  -  export set_secondary_fwnode() to modules
 
 eeepc-laptop:
  -  Drop duplicate check for led_classdev_unregister()
 
 hp-wmi:
  -  Introduce HPWMI_POWER_FW_OR_HW as convenient shortcut
  -  Convert simple_strtoul() to kstrtou32()
  -  Refactor postcode_store() to follow standard patterns
 
 intel_cht_int33fe:
  -  Fix spelling issues
  -  Switch to use acpi_dev_hid_uid_match()
  -  Convert to use set_secondary_fwnode()
  -  Convert software node array to group
 
 intel-hid:
  -  Add a quirk to support HP Spectre X2 (2015)
 
 intel_mid_powerbtn:
  -  Convert to use new SCU IPC API
 
 intel_pmc_core:
  -  avoid unused-function warnings
  -  Change Jasper Lake S0ix debug reg map back to ICL
 
 intel_pmc_ipc:
  -  Convert to MFD
  -  Move PCI IDs to intel_scu_pcidrv.c
  -  Drop intel_pmc_ipc_command()
  -  Start using SCU IPC
 
 intel_scu_ipc:
  -  Add managed function to register SCU IPC
  -  Introduce new SCU IPC API
  -  Move legacy SCU IPC API to a separate header
  -  Log more information if SCU IPC command fails
  -  Split out SCU IPC functionality from the SCU driver
 
 intel_scu_ipcutil:
  -  Convert to use new SCU IPC API
 
 intel-speed-select:
  -  Fix speed-select-base-freq-properties output on CLX-N
 
 intel_telemetry:
  -  Add telemetry_get_pltdata()
  -  Convert to use new SCU IPC API
 
 intel-vbtn:
  -  Only blacklist SW_TABLET_MODE on the 9 / "Laptop" chasis-type
  -  Detect switch position before registering the input-device
  -  Move detect_tablet_mode() to higher in the file
  -  Fix probe failure on devices with only switches
  -  Also handle tablet-mode switch on "Detachable" and "Portable" chassis-types
  -  Do not advertise switches to userspace if they are not there
  -  Split keymap into buttons and switches parts
  -  Use acpi_evaluate_integer()
 
 ISST:
  -  Increase timeout
 
 lg-laptop:
  -  Drop duplicate check for led_classdev_unregister()
 
 MAINTAINERS:
  -  Add me as maintainer of Intel SCU drivers
  -  Update entry for Intel Broxton PMC driver
 
 Merges of immutable branches:
  - Merge branch 'for-next'
  - Merge branch 'ib-mfd-x86-usb-watchdog-v5.7'
  - Merge branch 'ib-pdx86-properties'
 
 mfd:
  -  intel_soc_pmic_mrfld: Convert to use new SCU IPC API
  -  intel_soc_pmic_bxtwc: Convert to use new SCU IPC API
  -  intel_soc_pmic: Add SCU IPC member to struct intel_soc_pmic
 
 samsung-laptop:
  -  Drop duplicate check for led_classdev_unregister()
 
 software node:
  -  Allow register and unregister software node groups
 
 sony-laptop:
  -  Make resuming thermal profile safer
  -  SNC calls should handle BUFFER types
 
 thinkpad_acpi:
  -  Replace custom approach by kstrtoint()
  -  Use strndup_user() in dispatch_proc_write()
  -  Replace next_cmd(&buf) with strsep(&buf, ",")
  -  Drop duplicate check for led_classdev_unregister()
  -  Remove always false 'value < 0' statement
  -  Add support for dual fan control
 
 tools/power/x86/intel-speed-select:
  -  Fix invalid core mask
  -  Increase CPU count
  -  Fix json perf-profile output output
  -  Update version
  -  Enable clos for turbo-freq enable
  -  Fix CLX-N package information output
  -  Check support status before enable
  -  Change debug to error
 
 toshiba_acpi:
  -  Drop duplicate check for led_classdev_unregister()
 
 touchscreen_dmi:
  -  Update Trekstor Twin 10.1 entry
  -  Add info for the Trekstor Yourbook C11B
  -  Drop comma in terminator line
  -  add Vinga J116 touchscreen
  -  Add info for the ONDA V891 v5 tablet
  -  Add touchscreen info for techBite Arc 11.6.
  -  Add info for the MP-man MPWIN895CL tablet
 
 usb:
  -  typec: mux: Convert the Intel PMC Mux driver to use new SCU IPC API
 
 watchdog:
  -  iTCO: fix link error
  -  intel-mid_wdt: Convert to use new SCU IPC API
 
 wmi:
  -  Describe function parameters
  -  Fix indentation in some cases
  -  Replace UUID redefinitions by their originals
 
 x86/platform/intel-mid:
  -  Add empty stubs for intel_scu_devices_[create|destroy]()
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEqaflIX74DDDzMJJtb7wzTHR8rCgFAl7WCcoACgkQb7wzTHR8
 rCi+Pg//dDpMXTxCcXivHZPJHwuAxbwPeJRV9uDKKBSnKqfxyYu37oQf8AQiLTsL
 PZOAIiwlrXw0Jd+EH79zN2DyCujBg16B6mf4dx3fMK95OWhPoslofyKRwl8kOBP5
 QRZVpuwo6ayKwXV3cyFwWjXyWYJFL7+J3x+jjBmufBsoDJTn9edOCUa3oeHG0BYB
 4A91pVKwtfNqqdL/pwd+A9mEZrFJnVilyPRoxTipbpPJqvWQi9dYgb3wHKt/1NM3
 xPNd1GQHCI0Of4NGChszY0XdN4SyxFuyLmn1mogYq82r084QA4pLROb0+VFD2npd
 DQ4jxJqOwQDtC3gm789OeN6bZ0qnkO9HBwEmzVH7rwiajZxGW7U5rCgNYBahlTgr
 gY4kXIBXyOCO2/bItmrSvWDNBvVxD/THCfL4Q/cn6bNTy4TLTHAl2psQcsXIBT6/
 Z5SdmHMhxc80eDAOTtSJj0ODeDGvAgbV20n+X260FFAsefDBuXkYMHEaRBf9n2LJ
 8k9tauXZ6JdIc4K8/K+BaVl761Okl6PJPMTL7JsFqueHpyzZS7WclCYH5QQ1iN56
 10QzddSGp+4HfFFCG2cVkjXG2AnUgT3kQgEOHyLIxp6yKY1PghFXHTEmrLuheYum
 jK93qSva5tvvZzy9UejXXsIkDyg76zaIla3rmEEYAmgzPDawR9I=
 =pprB
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v5.8-1' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform driver updates from Andy Shevchenko:

 - Add a support of the media keys on the ASUS laptop UX325JA/UX425JA

 - ASUS WMI driver can now handle 2-in-1 models T100TA, T100CHI, T100HA,
   T200TA

 - Big refactoring of Intel SCU driver with Elkhart Lake support has
   been added

 - Slim Bootloarder firmware update signaling WMI driver has been added

 - Thinkpad ACPI driver can handle dual fan configuration on new P and X
   models

 - Touchscreen DMI driver has been extended to support
    - MP-man MPWIN895CL tablet
    - ONDA V891 v5 tablet
    - techBite Arc 11.6
    - Trekstor Twin 10.1
    - Trekstor Yourbook C11B
    - Vinga J116

 - Virtual Button driver got a few fixes to detect mode of 2-in-1 tablet
   models

 - Intel Speed Select tools update

 - Plenty of small cleanups here and there

* tag 'platform-drivers-x86-v5.8-1' of git://git.infradead.org/linux-platform-drivers-x86: (89 commits)
  platform/x86: dcdbas: Check SMBIOS for protected buffer address
  platform/x86: asus_wmi: Reserve more space for struct bias_args
  platform/x86: intel-vbtn: Only blacklist SW_TABLET_MODE on the 9 / "Laptop" chasis-type
  platform/x86: intel-hid: Add a quirk to support HP Spectre X2 (2015)
  platform/x86: touchscreen_dmi: Update Trekstor Twin 10.1 entry
  platform/x86: touchscreen_dmi: Add info for the Trekstor Yourbook C11B
  platform/x86: hp-wmi: Introduce HPWMI_POWER_FW_OR_HW as convenient shortcut
  platform/x86: hp-wmi: Convert simple_strtoul() to kstrtou32()
  platform/x86: hp-wmi: Refactor postcode_store() to follow standard patterns
  platform/x86: acerhdf: replace space by * in modalias
  platform/x86: ISST: Increase timeout
  tools/power/x86/intel-speed-select: Fix invalid core mask
  tools/power/x86/intel-speed-select: Increase CPU count
  tools/power/x86/intel-speed-select: Fix json perf-profile output output
  platform/x86: dell-wmi: Ignore keyboard attached / detached events
  platform/x86: dell-laptop: don't register micmute LED if there is no token
  platform/x86: thinkpad_acpi: Replace custom approach by kstrtoint()
  platform/x86: thinkpad_acpi: Use strndup_user() in dispatch_proc_write()
  platform/x86: thinkpad_acpi: Replace next_cmd(&buf) with strsep(&buf, ",")
  platform/x86: intel-vbtn: Detect switch position before registering the input-device
  ...
 2020-06-02 12:56:58 -07:00
Linus Torvalds
b23c4771ff A fair amount of stuff this time around, dominated by yet another massive 
set from Mauro toward the completion of the RST conversion.  I *really*
 hope we are getting close to the end of this.  Meanwhile, those patches
 reach pretty far afield to update document references around the tree;
 there should be no actual code changes there.  There will be, alas, more of
 the usual trivial merge conflicts.
 
 Beyond that we have more translations, improvements to the sphinx
 scripting, a number of additions to the sysctl documentation, and lots of
 fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl7VId8PHGNvcmJldEBs
 d24ubmV0AAoJEBdDWhNsDH5Yq/gH/iaDgirQZV6UZ2v9sfwQNYolNpf2sKAuOZjd
 bPFB7WJoMQbKwQEvYrAUL2+5zPOcLYuIfzyOfo1BV1py+EyKbACcKjI4AedxfJF7
 +NchmOBhlEqmEhzx2U08HRc4/8J223WG17fJRVsV3p+opJySexSFeQucfOciX5NR
 RUCxweWWyg/FgyqjkyMMTtsePqZPmcT5dWTlVXISlbWzcv5NFhuJXnSrw8Sfzcmm
 SJMzqItv3O+CabnKQ8kMLV2PozXTMfjeWH47ZUK0Y8/8PP9+cvqwFzZ0UDQJ1Xaz
 oyW/TqmunaXhfMsMFeFGSwtfgwRHvXdxkQdtwNHvo1dV4dzTvDw=
 =fDC/
 -----END PGP SIGNATURE-----

Merge tag 'docs-5.8' of git://git.lwn.net/linux

Pull documentation updates from Jonathan Corbet:
 "A fair amount of stuff this time around, dominated by yet another
  massive set from Mauro toward the completion of the RST conversion. I
  *really* hope we are getting close to the end of this. Meanwhile,
  those patches reach pretty far afield to update document references
  around the tree; there should be no actual code changes there. There
  will be, alas, more of the usual trivial merge conflicts.

  Beyond that we have more translations, improvements to the sphinx
  scripting, a number of additions to the sysctl documentation, and lots
  of fixes"

* tag 'docs-5.8' of git://git.lwn.net/linux: (130 commits)
  Documentation: fixes to the maintainer-entry-profile template
  zswap: docs/vm: Fix typo accept_threshold_percent in zswap.rst
  tracing: Fix events.rst section numbering
  docs: acpi: fix old http link and improve document format
  docs: filesystems: add info about efivars content
  Documentation: LSM: Correct the basic LSM description
  mailmap: change email for Ricardo Ribalda
  docs: sysctl/kernel: document unaligned controls
  Documentation: admin-guide: update bug-hunting.rst
  docs: sysctl/kernel: document ngroups_max
  nvdimm: fixes to maintainter-entry-profile
  Documentation/features: Correct RISC-V kprobes support entry
  Documentation/features: Refresh the arch support status files
  Revert "docs: sysctl/kernel: document ngroups_max"
  docs: move locking-specific documents to locking/
  docs: move digsig docs to the security book
  docs: move the kref doc into the core-api book
  docs: add IRQ documentation at the core-api book
  docs: debugging-via-ohci1394.txt: add it to the core-api book
  docs: fix references for ipmi.rst file
  ...
 2020-06-01 15:45:27 -07:00
Linus Torvalds
ca1f5df23f Printk changes for 5.8 
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAl7U1TIACgkQUqAMR0iA
 lPI0mQ//TcVlRJgts/iwv0M2Simje28t9tziOHgWmEeiyGwE7vwDPDzt8QFiKzBa
 IrJ5iTRMtCrEF+eapqeH4g+Ve4Npm5Cobl8/h9JEiVu3SNC48TuaiUzU3+Bfl1zV
 vcDfZtN9QD1/CdLGlyKO75xjkCOaJRCFnx5ToXnd3llshMKI2XebUCnEH4TDe6Fz
 NGTjJL4kCPwzmae++UhlMfKwkayBtNbqcLkaTb7d67Tw2DcuuIVixUER77oC9QPN
 SfxdS07s0UVc4C9bCVe3KtYZR5YU/riOjKNJNutzP3JDtQNugywrrtI0qBwEisqM
 puMJ3xLeLssTn10FJxRK9ewRlXy2zT9mmcCuaVU6LtiyGnHOuEwIU+Ewu0itiJGu
 JuFovsNqTvOiZqFP7+pkDktOjffF2hsY/a6NxHr6aof8CrdO2w9dmCAgzGvnwV1N
 /zlmmPSEigVLz47eeivIIdQrPUejrEV7g1wOYYApnIlNCmGjdkGnXKNaUrLGDehQ
 QIlpx1uvmhntjiw1hTSbOV7KOQxLGtuy6DWLYC7uHD3H3aGDQyQO8dZYXSfOY1Qu
 cvQ/K8ykW0Kq2JKEHjkwSRHKDpxhvbQg7N5JCHQA49ahdZD3O5bOfeTofw+7nFO0
 j9g2Qv6nWFjLbAIAFtqjh6wz0UtGNoTl2cqQswsS10wlDcsq8vs=
 =pUBG
 -----END PGP SIGNATURE-----

Merge tag 'printk-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux

Pull printk updates from Petr Mladek:

 - Benjamin Herrenschmidt solved a problem with non-matched console
   aliases by first checking consoles defined on the command line. It is
   a more conservative approach than the previous attempts.

 - Benjamin also made sure that the console accessible via /dev/console
   always has CON_CONSDEV flag.

 - Andy Shevchenko added the %ptT modifier for printing struct time64_t.
   It extends the existing %ptR handling for struct rtc_time.

 - Bruno Meneguele fixed /dev/kmsg error value returned by unsupported
   SEEK_CUR.

 - Tetsuo Handa removed unused pr_cont_once().

... and a few small fixes.

* tag 'printk-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  printk: Remove pr_cont_once()
  printk: handle blank console arguments passed in.
  kernel/printk: add kmsg SEEK_CUR handling
  printk: Fix a typo in comment "interator"->"iterator"
  usb: pulse8-cec: Switch to use %ptT
  ARM: bcm2835: Switch to use %ptT
  lib/vsprintf: Print time64_t in human readable format
  lib/vsprintf: update comment about simple_strto<foo>() functions
  printk: Correctly set CON_CONSDEV even when preferred console was not registered
  printk: Fix preferred console selection with multiple matches
  printk: Move console matching logic into a separate function
  printk: Convert a use of sprintf to snprintf in console_unlock
 2020-06-01 12:13:30 -07:00
Sebastian Reichel
601c2a543f power: supply: core: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED 
Some battery fuel gauges know when the battery needs to
be recalibrated before providing usable values. This
should be reported via the health property.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
 2020-05-28 19:25:31 +02:00
Sebastian Reichel
feabe49e46 power: supply: core: add manufacture date properties 
Some smart batteries store their manufacture date, which is
useful to identify the battery and/or to know about the cell
quality.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
 2020-05-28 19:25:31 +02:00
Sebastian Reichel
bac705abcf power: supply: core: add capacity error margin property 
Add a property for reporting the error margin expected
by fuel gauge chips.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
 2020-05-28 19:25:31 +02:00
Kajol Jain
15cd1d35ba Documentation/ABI: Add ABI documentation for chips and sockets 
Add documentation for the following sysfs files:
/sys/devices/hv_24x7/interface/chipspersocket,
/sys/devices/hv_24x7/interface/sockets,
/sys/devices/hv_24x7/interface/coresperchip

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200525104308.9814-5-kjain@linux.ibm.com
 2020-05-28 23:24:39 +10:00
Lee Jones
e8a6f4acae Merge branches 'ib-mfd-x86-usb-watchdog-5.8', 'ib-mfd-power-rtc-5.8', 'ib-mfd-iio-power-5.8' and 'ib-mfd-hwmon-5.8' into ibs-for-mfd-merged 2020-05-26 10:50:51 +01:00
Saravanan Sekar
fe27f04e0c power: supply: mp2629: Add impedance compensation config 
Allows the user to compensate the intrinsic resistance of the battery
to accelerate the charging cycle.

Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
 2020-05-26 10:41:58 +01:00
Srinivas Pandruvada
7b52b200cf ACPI: DPTF: Add battery participant driver 
This driver adds support for Dynamic Platform and Thermal Framework
battery participant device support.

These attributes are presented via sysfs interface under the platform
device for the battery participant:
$ls /sys/bus/platform/devices/INT3532:00/dptf_battery
	current_discharge_capbility_ma
	max_platform_power_mw
	no_load_voltage_mv
	high_freq_impedance_mohm
	max_steady_state_power_mw

Refer to the documentation at
Documentation/ABI/testing/sysfs-platform-dptf
for details.

Here the implementation reuses existing dptf-power.c as the motivation and
processing is same. It also shares one ACPI method. Here this change is
using participant type, "PTYP" method to identify and do different
processing. By using participant type, create/delete either "dptf_power"
or "dptf_battery" attribute group and send notifications.

The particpant type for for the battery participant is 0x0C.

ACPI methods description:

PMAX (Intel(R) Dynamic Tuning Platform Max Power Supplied by Battery):
This object evaluates to the maximum platform power that can be supported
by the battery in milli watts.

PBSS (Intel(R) Dynamic Tuning Power Battery Steady State):
This object returns the max sustained power for battery in milli watts.

RBHF (Intel(R) Dynamic Tuning High Frequency Impedance):
This object returns high frequency impedance value that can be obtained
from battery fuel gauge.

VBNL (Intel(R) Dynamic Tuning No-Load Voltage)
This object returns battery instantaneous no-load voltage that can be
obtained from battery fuel gauge in milli volts

CMPP (Intel(R) Dynamic Tuning Current Discharge Capability)
This object returns battery discharge current capability obtained from
battery fuel gauge milli amps.

Notifications:

0x80: PMAX change. Used to notify Intel(R)Dynamic Tuning Battery
participant driver when the PMAX has changed by 250mw.
0x83: PBSS change. Used to notify Intel(R) Dynamic Tuning Battery
participant driver when the power source has changed.
0x85: RBHF change. Used to notify Intel(R)Dynamic Tuning Battery
participant driver when the RBHF has changed over a threshold by
5mOhm.
0x86: Battery Capability change. Used to notify Intel(R)Dynamic Tuning
Battery participant driver when the battery capability has changed.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2020-05-25 12:05:26 +02:00
Srinivas Pandruvada
668ce99e4e ACPI: DPTF: Additional sysfs attributes for power participant driver 
Add two additional attributes to the existing power participant driver:
rest_of_platform_power_mw: (RO) Shows the rest of worst case platform
power in mW outside of S0C. This will help in power distribution to SoC
and rest of the system. For example on a test system, this value is 2.5W
with a 15W TDP SoC. Based on the adapter rating (adapter_rating_mw), user
space software can decide on proper power allocation to SoC to improve
short term performance via powercap/RAPL interface.

prochot_confirm: (WO) Confirm EC about a prochot notification.

Also userspace is notified via sysfs_notify(), whenever power source or
rest of the platform power is changed. So user space can use poll()
system call on those attributes.

The ACPI methods used in this patch are as follows:

PROP
This object evaluates to the rest of worst case platform power in mW.
Bits:
23:0 Worst case rest of platform power in mW.

PBOK
PBOK is a method designed to provide a mechanism for OSPM to change power
setting before EC can de-assert a PROCHOT from a device. The EC may
receive several PROCHOTs, so it has a sequence number attached to PSRC
(read via existing attribute "platform_power_source"). Once OSPM takes
action for a PSRC change notification, it can call PBOK method to confirm
with the sequence number.
Bits:
3:0 Power Delivery State Change Sequence number
30  Reserved
31  0 – Not OK to de-assert PROCHOT
    1 – OK to de-assert PROCHOT

PSRC (Platform Power Source): Not new in this patch but for
documentation for new bits
This object evaluates to an integer that represents the system power
source as well as the power delivery state change sequence number.
Bits:
3:0 The current power source as an integer for AC, DC, USB, Wireless.
0 = DC, 1 = AC, 2 = USB, 3 = Wireless Charging
7:4 Power Delivery State Change Sequence Number. Default value is 0

Notifications:
0x81: (Power State Change) Used to notify when the power source has
changed.
0x84: (PROP change) Used to notify when the platform rest of power has
changed.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Subject, minor ABI documentation edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2020-05-25 12:03:43 +02:00
Shukun Tan
988453fb2f crypto: hisilicon/qm - change debugfs file name from qm_regs to regs 
The debugfs qm_regs file is already in the qm directory, so no qm_ prefix
is required.

Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
 2020-05-23 00:08:23 +10:00
Longfang Liu
6621e6492f crypto: hisilicon/zip - add debugfs for Hisilicon ZIP 
Hisilicon ZIP engine driver uses debugfs
to provides IO operation debug information

Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
 2020-05-23 00:08:22 +10:00
Hui Tang
64a6301ebe crypto: hisilicon/hpre - add debugfs for Hisilicon HPRE 
Add debugfs to provides IO operation debug information
and add BD processing timeout count function

Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
 2020-05-23 00:08:22 +10:00
Kai Ye
8213a1a60c crypto: hisilicon/sec2 - add debugfs for Hisilicon SEC 
Hisilicon SEC engine driver uses debugfs
to provides IO operation debug information

Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
 2020-05-23 00:08:22 +10:00
Longfang Liu
0a3a396021 crypto: hisilicon/qm - add debugfs to the QM state machine 
The QM driver uses debugfs to provides the current state of
the QM state machine

Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
 2020-05-23 00:08:21 +10:00
Longfang Liu
8502652542 crypto: hisilicon/qm - add debugfs for QM 
Add DebugFS method to get the information of IRQ/Requests/QP .etc of QM
for HPRE/ZIP/SEC drivers.

Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
 2020-05-23 00:08:21 +10:00
Greg Kroah-Hartman
ddc0aef01a soundwire updates for v5.8-rc1 
This contains sdw_master_device patches and other updates done by Intel
 folks.
 
 Details:
   - sdw_master_device to represent the master instances.
   - sysfs properties for sdw_master_device and sdw_slave.
   - Documentation update for TDM modes.
   - some code cleanup patches and odd updates.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAl7Gjb0ACgkQfBQHDyUj
 g0eCxQ//VrLecOXKp/UHgUXMxGGfOC/Bcg45zsuRQA18tHC0Ldx1JwRw4V57+5W7
 tG980Z0DH94LEmt9Cuj9EvAoFTt5gH27SDvitvgc/S8BEOsD1XzsSIhwoQxdCt4O
 6a8cSb+Oopm1efqXr72LTMIoPyQPhFcz61Y9qPmfomzKedTU1t4eZeUUnzsx9Ynz
 q1OE9/C/OqIhWBC5duBaM83tL6AVXH6lXW1hi53RjlIbSMdr6T/Mo0/9AAnKJv/t
 32NvrFmJ8f+8rJsj3uRUKuSB3LxLoOM7yVhQ3NryzKZr3i2XA4Y0LaLd1KG2hzEB
 BO8zDIBeGkP/8FKFzyvIiBvF8bgxjbaaimEN984RfXbzlFXN49wfQAdgMI3I4Alu
 RjZl0s2tnJYAFicUdbw55e1JtXOuPAPtpokaugmRM2QbLta3dt00Tng9c0GVj/c6
 Tp5plgW/tkRICCmcHC4UVEAfR79SfTuhVP6tMscAaj9R0LwV15hmDQkVwSIjLR3u
 n9NCWaeHrByRuyLyMvsbpFaGw07OKuRJwy6gKxGDpc3yUsPocX5TX5ap1DSfOt+3
 96vUpTM0HI9+Rco1tlSHghJ97HaVkIbUNAQgmgaP1nF5ve4eI+NwTPyW4ax+Y+kW
 /AmkEvDoLnNcKLvAMRfq05KOxNcmP2gKhb4+XU9d0fMaJYWCgRg=
 =5MsU
 -----END PGP SIGNATURE-----

Merge tag 'soundwire-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next

Vinod writes:

soundwire updates for v5.8-rc1

This contains sdw_master_device patches and other updates done by Intel
folks.

Details:
  - sdw_master_device to represent the master instances.
  - sysfs properties for sdw_master_device and sdw_slave.
  - Documentation update for TDM modes.
  - some code cleanup patches and odd updates.

* tag 'soundwire-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  soundwire: intel: use a single module
  soundwire: fix spelling mistake
  soundwire: fix trailing line in sysfs_slave.c
  soundwire: add Slave sysfs support
  soundwire: master: add sysfs support
  soundwire: disco: s/ch/channels/
  soundwire: master: add runtime pm support
  soundwire: bus_type: add sdw_master_device support
  soundwire: bus: add unique bus id
  soundwire: bus_type: introduce sdw_slave_type and sdw_master_type
  soundwire: bus: rename sdw_bus_master_add/delete, add arguments
  soundwire: intel: (cosmetic) remove multiple superfluous "else" statements
  soundwire: (cosmetic) remove multiple superfluous "else" statements
  soundwire: qcom: Use IRQF_ONESHOT
  soundwire: bus: reduce verbosity on enumeration
  soundwire: debugfs: clarify SDPX license with GPL-2.0-only
  soundwire: slave: don't init debugfs on device registration error
  Documentation: SoundWire: clarify TDM mode support
  soundwire: qcom: fix error handling in probe
  soundwire: intel: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer
 2020-05-22 09:25:25 +02:00
Bruno Meneguele
8ece3b3eb5 kernel/printk: add kmsg SEEK_CUR handling 
Userspace libraries, e.g. glibc's dprintf(), perform a SEEK_CUR operation
over any file descriptor requested to make sure the current position isn't
pointing to junk due to previous manipulation of that same fd. And whenever
that fd doesn't have support for such operation, the userspace code expects
-ESPIPE to be returned.

However, when the fd in question references the /dev/kmsg interface, the
current kernel code state returns -EINVAL instead, causing an unexpected
behavior in userspace: in the case of glibc, when -ESPIPE is returned it
gets ignored and the call completes successfully, while returning -EINVAL
forces dprintf to fail without performing any action over that fd:

  if (_IO_SEEKOFF (fp, (off64_t)0, _IO_seek_cur, _IOS_INPUT|_IOS_OUTPUT) ==
  _IO_pos_BAD && errno != ESPIPE)
    return NULL;

With this patch we make sure to return the correct value when SEEK_CUR is
requested over kmsg and also add some kernel doc information to formalize
this behavior.

Link: https://lore.kernel.org/r/20200317103344.574277-1-bmeneg@redhat.com
Cc: linux-kernel@vger.kernel.org
Cc: rostedt@goodmis.org,
Cc: David.Laight@ACULAB.COM
Signed-off-by: Bruno Meneguele <bmeneg@redhat.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
 2020-05-21 13:32:25 +02:00
Pierre-Louis Bossart
bcac590299 soundwire: add Slave sysfs support 
Expose MIPI DisCo Slave properties in sysfs.

For Slave properties and Data Port 0, the attributes are managed with
simple devm_ support.

A Slave Device may have more than one Data Port (DPN), and each Data
Port can be sink or source. The attributes are created dynamically
using pre-canned macros, but still use devm_ with a name attribute
group to avoid creating kobjects - as requested by GregKH. In the
_show function, we use container_of() to retrieve port number and
direction required to extract the information.

Audio modes are not supported for now. Depending on the discussions
the SoundWire Device Class, we may add it later as is or follow the
new specification.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200518203551.2053-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
 2020-05-20 17:22:41 +05:30
Pierre-Louis Bossart
c5778ca49a soundwire: master: add sysfs support 
Add the master properties as attributes. The description is directly
derived from the MIPI DisCo specification.

Credits: this patch is based on an earlier internal contribution by
Vinod Koul, Sanyog Kale, Shreyas Nc and Hardik Shah.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200518203551.2053-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
 2020-05-20 17:22:36 +05:30
Hanjun Guo
a0bd8a2780 Documentation: ABI: make current_governer_ro as a candidate for removal 
Since both current_governor and current_governor_ro co-exist under
/sys/devices/system/cpu/cpuidle/ file, and it's duplicate,
make current_governer_ro as a candidate for removal.

Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Doug Smythies <dsmythies@telus.net>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2020-05-19 17:41:17 +02:00
Hanjun Guo
7395683a24 Documentation: cpuidle: update the document 
Update the document after the remove of cpuidle_sysfs_switch.

Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2020-05-19 17:41:17 +02:00
Oded Gabbay
bcaf415204 habanalabs: add hwmgr module for gaudi 
The hwmgr module is responsible for messages sent to GAUDI F/W that are
not common to all habanalabs ASICs.

In GAUDI, we provide the user a simplified mode of controlling the ASIC
clock frequency. Instead of three different clocks, we present a single
clock property that the user can configure via sysfs.

Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
 2020-05-19 14:48:41 +03:00
Oded Gabbay
ca62433f53 habanalabs: support clock gating enable/disable 
In Gaudi there is a feature of clock gating certain engines.
Therefore, add this property to the device structure.

In addition, due to a limitation of this feature, the driver needs to
dynamically enable or disable this feature during run-time. Therefore, add
ASIC interface functions to enable/disable this function from the common
code.

Moreover, this feature must be turned off when the user wishes to debug the
ASIC by reading/writing registers and/or memory through the driver's
debugfs. Therefore, add an option to enable/disable clock gating via the
debugfs interface.

Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
 2020-05-19 14:48:41 +03:00
Jack Wang
aa4d16e44f block/rnbd: a bit of documentation 
README with description of major sysfs entries, sysfs documentation
are moved to ABI dir as Bart suggested.

Link: https://lore.kernel.org/r/20200511135131.27580-25-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
 2020-05-17 18:57:17 -03:00
Jack Wang
745b6a3d4a RDMA/rtrs: a bit of documentation 
README with description of major sysfs entries, sysfs documentation has
been moved to ABI dir as suggested by Bart.

Link: https://lore.kernel.org/r/20200511135131.27580-15-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
 2020-05-17 18:57:15 -03:00
Omer Shpigelman
76cedc739d habanalabs: remove stop-on-error flag from DMA 
Stop-on-error mode in DMA is useful as it stops the transaction
immediately upon error e.g. page fault.
But it may cause the next command submission to fail as is leaves the DMA
in unstable state.
Therefore we remove the stop-on-error configuration from the DMA.
Stop-on-err is still available for debug.

Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
 2020-05-17 12:06:22 +03:00
Akira Shimahara
57c76221d5 w1_therm: adding bulk read support to trigger multiple conversion on bus 
Adding bulk read support:
Sending a 'trigger' command in the dedicated sysfs entry of bus master
device send a conversion command for all the slaves on the bus. The sysfs
entry is added as soon as at least one device supporting this feature
is detected on the bus.

The behavior of the sysfs reading temperature on the device is as follow:
 * If no bulk read pending, trigger a conversion on the device, wait for
 the conversion to be done, read the temperature in device RAM
 * If a bulk read has been trigger, access directly the device RAM
This behavior is the same on the 2 sysfs entries ('temperature' and
'w1_slave').

Reading the therm_bulk_read sysfs give the status of bulk operations:
 * '-1': conversion in progress on at least 1 sensor
 * '1': conversion complete but at least one sensor has not been read yet
 * '0': no bulk operation. Reading temperature on ecah device will trigger
a conversion

As not all devices support bulk read feature, it has been added in device
family structure.

The attribute is set at master level as soon as a supporting device is
discover. It is removed when the last supported device leave the bus.
The count of supported device is kept with the static counter
bulk_read_device_counter.

A strong pull up is apply on the line if at least one device required it.
The duration of the pull up is the max time required by a device on the
line, which depends on the resolution settings of each device. The strong
pull up could be adjust with the a module parameter.

Updating documentation in Documentation/ABI/testing/sysfs-driver-w1_therm
and Documentation/w1/slaves/w1_therm.rst accordingly.

Signed-off-by: Akira Shimahara <akira215corp@gmail.com>
Link: https://lore.kernel.org/r/20200511203820.411483-1-akira215corp@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2020-05-15 16:29:00 +02:00
Akira Shimahara
e2c94d6f57 w1_therm: adding alarm sysfs entry 
Adding device alarms settings by a dedicated sysfs entry alarms (RW):
read or write TH and TL in the device RAM. Checking devices in alarm
state could be performed using the master search command.

As alarms temperature level are store in a 8 bit register on the device
and are signed values, a safe cast shall be performed using the min and
max temperature that device are able to measure. This is done by
int_to_short inline function.

A 'write_data' field is added in the device structure, to bind the
correct writing function, as some devices may have 2 or 3 bytes RAM.

Updating Documentation/ABI/testing/sysfs-driver-w1_therm accordingly.

Signed-off-by: Akira Shimahara <akira215corp@gmail.com>
Link: https://lore.kernel.org/r/20200511203801.411253-1-akira215corp@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2020-05-15 16:29:00 +02:00
Akira Shimahara
67b392f7b8 w1_therm: optimizing temperature read timings 
Optimizing temperature reading by reducing waiting conversion time
according to device resolution settings, as per device specification.
This is device dependent as not all the devices supports resolution
setting, so it has been added in device family structures.

The process to read the temperature on the device has been adapted in a
new function 'convert_t()', which replace the former 'read_therm()', is
introduce to deal with this timing. Strong pull up is also applied during
the required time, according to device power status needs and
'strong_pullup' module parameter.

'temperature_from_RAM()' function is introduced to get the correct
temperature computation (device dependent) from device RAM data.

An new sysfs entry has been added to ouptut only temperature. The old
entry w1_slave has been kept for compatibility, without changing its
output format.

Updating Documentation/ABI/testing/sysfs-driver-w1_therm accordingly.

Signed-off-by: Akira Shimahara <akira215corp@gmail.com>
Link: https://lore.kernel.org/r/20200511203742.411039-1-akira215corp@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2020-05-15 16:28:59 +02:00
Akira Shimahara
45d457a4cf w1_therm: adding eeprom sysfs entry 
The driver implement 2 hardware functions to access device RAM:
 * copy_scratchpad
 * recall_scratchpad
They act according to device specifications.

As EEPROM operations are not device dependent (all w1_therm can perform
EEPROM read/write operation following the same protocol), it is removed
from device families structures.

Updating Documentation/ABI/testing/sysfs-driver-w1_therm accordingly.

Signed-off-by: Akira Shimahara <akira215corp@gmail.com>
Link: https://lore.kernel.org/r/20200511203725.410844-1-akira215corp@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2020-05-15 16:28:59 +02:00
Akira Shimahara
308bdb94de w1_therm: adding resolution sysfs entry 
Adding resolution sysfs entry (RW) to get or set the device resolution
Write values are managed as follow:
	* '9..12': resolution to set in bit
	* Anything else: do nothing
Read values are :
	* '9..12': device resolution in bit
	* '-xx': xx is kernel error when reading the resolution

Only supported devices will show the sysfs entry. A new family has been
created for DS18S20 devices as they do not implement resolution feature.

The resolution of each device is check when the device is
discover by the bus master, in 'w1_therm_add_slave(struct w1_slave *)'.
The status is stored in the device structure w1_therm_family_data so
that the driver always knows the resolution of each device, which could
be used later to determine the required conversion duration (resolution
dependent).

The resolution is re evaluate each time a user read or write the sysfs
entry.

To avoid looping through the w1_therm_families at run time, the pointer
'specific_functions' is set up to the correct 'w1_therm_family_converter'
when the slave is added (which mean when it is discovered by the master).
This initialization is done by a helper function
'device_family(struct w1_slave *sl)', and a dedicated macro
'SLAVE_SPECIFIC_FUNC(sl)' allow the access to the specific function of the
slave device.

'read_scratchpad' and 'write_scratchpad' are the hardware functions to
access the device RAM, as per protocol specification.

It cancel the former 'precision' functions, which was only set and never
read (so not stored in the device struct).

Updating Documentation/ABI/testing/sysfs-driver-w1_therm accordingly.

Signed-off-by: Akira Shimahara <akira215corp@gmail.com>
Link: https://lore.kernel.org/r/20200511203708.410649-1-akira215corp@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2020-05-15 16:28:59 +02:00
Akira Shimahara
b7bb6ca17a w1_therm: adding ext_power sysfs entry 
Adding ext_power sysfs entry (RO). Return the power status of the device:
 - 0: device parasite powered
 - 1: device externally powered
 - xx: xx is kernel error

The power status of each device is check when the device is
discover by the bus master, in 'w1_therm_add_slave(struct w1_slave *)'.
The status is stored in the device structure w1_therm_family_data so
that the driver always knows the power state of each device, which could
be used later to determine the required strong pull up to apply on the
line.

The power status is re evaluate each time the sysfs ext_power read by
a user.

The hardware function 'read_powermode(struct w1_slave *sl)' act just as
per device specifications, sending W1_READ_PSUPPLY command on the bus,
and issue a read time slot, reading only one bit.

A helper function 'bool bus_mutex_lock(struct mutex *lock)' is introduced.
It try to aquire the bus mutex several times (W1_THERM_MAX_TRY), waiting
W1_THERM_RETRY_DELAY between two attempt.

Updating Documentation/ABI/testing/sysfs-driver-w1_therm accordingly.

Signed-off-by: Akira Shimahara <akira215corp@gmail.com>
Link: https://lore.kernel.org/r/20200511203650.410439-1-akira215corp@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2020-05-15 16:28:59 +02:00
Akira Shimahara
daa3cfeb19 w1_therm: adding sysfs-driver-w1_therm doc 
Adding a sysfs-driver-w1_therm documentation file in
Documentation/ABI/testing. It describe the onlys sysfs entry of w1_therm
module, based on Documentation/w1/slaves/w1_therm.rst

Signed-off-by: Akira Shimahara <akira215corp@gmail.com>
Link: https://lore.kernel.org/r/20200511203631.410227-1-akira215corp@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2020-05-15 16:28:59 +02:00
Christian Gromm
b50220c136 Documentation: ABI: correct sysfs attribute description of MOST driver 
This patch fixes the ABI description file sysfs-bus-most.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Link: https://lore.kernel.org/r/1589534465-7423-8-git-send-email-christian.gromm@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2020-05-15 15:35:13 +02:00
Jithu Joseph
2d30fcdd43 platform/x86: Add Slim Bootloader firmware update signaling driver 
Slim Bootloader(SBL) is a small open-source boot firmware,
designed for running on certain Intel platforms. SBL can be
thought-of as fulfilling the role of a minimal BIOS
implementation, i.e initializing the hardware and booting
Operating System.

Since SBL is not UEFI compliant, firmware update cannot be triggered
using standard UEFI runtime services. Further considering performance
impact, SBL doesn't look for a firmware update image on every reset
and does so only when firmware update signal is asserted.

SBL exposes an ACPI-WMI device which comes up in sysfs as
/sys/bus/wmi/44FADEB1xxx and this driver adds a
"firmware_update_request" device attribute. This attribute normally
has a value of 0 and userspace can signal SBL to update firmware,
on next reboot, by writing a value of 1 like:

echo 1 > /sys/bus/wmi/devices/44FADEB1xxx/firmware_update_request

This driver only implements a signaling mechanism, the actual firmware
update process and various details like firmware update image format,
firmware image location etc are defined by SBL and are not in the
scope of this driver.

DocLink: https://slimbootloader.github.io/security/firmware-update.html
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
 2020-05-05 20:27:44 +03:00
Gautham R. Shenoy
bde752c3d6 Documentation: Document sysfs interfaces purr, spurr, idle_purr, idle_spurr 
Add documentation for the following sysfs interfaces:
/sys/devices/system/cpu/cpuX/purr
/sys/devices/system/cpu/cpuX/spurr
/sys/devices/system/cpu/cpuX/idle_purr
/sys/devices/system/cpu/cpuX/idle_spurr

Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1586249263-14048-6-git-send-email-ego@linux.vnet.ibm.com
 2020-04-30 12:35:27 +10:00
Wu Hao
724142f8c4 fpga: dfl: fme: add performance reporting support 
This patch adds support for performance reporting private feature
for FPGA Management Engine (FME). Now it supports several different
performance counters, including 'basic', 'cache', 'fabric', 'vtd'
and 'vtd_sip'. It allows user to use standard linux tools to access
these performance counters.

e.g. List all events by "perf list"

  perf list | grep fme

  dfl_fme0/cache_read_hit/                     [Kernel PMU event]
  dfl_fme0/cache_read_miss/                    [Kernel PMU event]
  ...

  dfl_fme0/fab_mmio_read/                      [Kernel PMU event]
  dfl_fme0/fab_mmio_write/                     [Kernel PMU event]
  ...

  dfl_fme0/fab_port_mmio_read,portid=?/        [Kernel PMU event]
  dfl_fme0/fab_port_mmio_write,portid=?/       [Kernel PMU event]
  ...

  dfl_fme0/vtd_port_devtlb_1g_fill,portid=?/   [Kernel PMU event]
  dfl_fme0/vtd_port_devtlb_2m_fill,portid=?/   [Kernel PMU event]
  ...

  dfl_fme0/vtd_sip_iotlb_1g_hit/               [Kernel PMU event]
  dfl_fme0/vtd_sip_iotlb_1g_miss/              [Kernel PMU event]
  ...

  dfl_fme0/clock                               [Kernel PMU event]
  ...

e.g. check increased counter value after run one application using
"perf stat" command.

 perf stat -e dfl_fme0/fab_mmio_read/,dfl_fme0/fab_mmio_write/ ./test

 Performance counter stats for './test':

                 1      dfl_fme0/fab_mmio_read/
                 2      dfl_fme0/fab_mmio_write/

       1.009496520 seconds time elapsed

Please note that fabric counters support both fab_* and fab_port_*, but
actually they are sharing one set of performance counters in hardware.
If user wants to monitor overall data events on fab_* then fab_port_*
can't be supported at the same time, see example below:

perf stat -e dfl_fme0/fab_mmio_read/,dfl_fme0/fab_port_mmio_write,portid=0/

 Performance counter stats for 'system wide':

                 0      dfl_fme0/fab_mmio_read/
   <not supported>      dfl_fme0/fab_port_mmio_write,portid=0/

       2.141064085 seconds time elapsed

Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Link: https://lore.kernel.org/r/1587949583-12058-3-git-send-email-hao.wu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2020-04-28 15:49:28 +02:00
Rajan Vaja
a2cc220a9a firmware: xilinx: Add sysfs and API to set boot health status 
Add sysfs interface to set boot health status from user space.
Add API used by this interface to communicate with firmware.

If PMUFW is compiled with CHECK_HEALTHY_BOOT, it will check the
healthy bit on FPD WDT expiration. If healthy bit is set by a user
application running in Linux, PMUFW will do APU only restart. If
healthy bit is not set during FPD WDT expiration, PMUFW will do
system restart.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-26-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2020-04-28 15:46:54 +02:00
Rajan Vaja
b3ae24c448 firmware: xilinx: Add sysfs to set shutdown scope 
The Linux shutdown functionality implemented via PSCI system_off does
not include an option to set a scope, i.e. which parts of the system to
shut down.

This patch creates sysfs that allows to set the shutdown scope for the
next shutdown request. When the next shutdown is performed, the platform
specific portion of PSCI-system_off can use the chosen shutdown scope.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Stefan Krsmanovic <stefan.krsmanovic@aggios.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-25-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2020-04-28 15:46:54 +02:00
Rajan Vaja
ae5c961da6 firmware: xilinx: Add sysfs interface 
Add firmware-ggs sysfs interface which provides read/write
interface to global storage registers.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-23-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2020-04-28 15:46:54 +02:00
Mika Westerberg
25f1ca31e2 platform/x86: intel_pmc_ipc: Convert to MFD 
This driver only creates a bunch of platform devices sharing resources
belonging to the PMC device. This is pretty much what MFD subsystem is
for so move the driver there, renaming it to intel_pmc_bxt.c which
should be more clear what it is.

MFD subsystem provides nice helper APIs for subdevice creation so
convert the driver to use those. Unfortunately the ACPI device includes
separate resources for most of the subdevices so we cannot simply call
mfd_add_devices() to create all of them but instead we need to call it
separately for each device.

The new MFD driver continues to expose two sysfs attributes that allow
userspace to send IPC commands to the PMC/SCU to avoid breaking any
existing applications that may use these. Generally this is bad idea so
document this in the ABI documentation.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
 2020-04-24 11:18:44 +01:00
Greg Kroah-Hartman
4e1d96306d First set of new IIO device support, features and cleanup for the 5.8 cycle 
Usual mix of new drivers, new support in old drivers and lots of minor
 cleanup. Yaml conversions also continue to trickle in (plenty more to go!)
 
 New device support
 * ad7476
   - Add ad7091 support (ID only)
 * ad9467
   - New driver for this 200/250 MSPS adi-axi-adc and SPI attached ADC.
 * adi-axi-adc
   - New driver to support ADIs generic AXI ADC IP core, used to provide
     high speed interfaces to ADCs (JESD204B/C or parallel interfaces). Usually
     paired with a device using a slow configuration interface (spi etc)
     Includes DT bindings and some fixes for fpga headers.
 * bmg160
   - Add support for BMI088 (ID only)
 * max1241
   - New driver for this ADC.
 * st_sensors
   - Add support for LIS2HH12 accelerometer
 * sx9310
   - New driver supporting sx9310 and sx9311 proximity sensors.
 
 Yaml DT binding conversions
 * rockchip-saradc (including adding some missing parts)
 * stm32-dac
 * tsl2563
 * vcnl4000
 
 Features
 * st_lsm6dsx
   - Add LIS3MDL as a possible sensor hub device.
 * vcnl4000
   - Add new concept of near level (from DT) to provide to userspace which
     often needs to have some calibrated concept of 'near'.
 
 Cleanups, minor fixes etc.
 * core
   - Use snprintf for functions where strings are built and there is
     potential for overflow.
   - Correct docs to indicate mlock should not be used directly by drivers.
   - Fix up accidental dropping of a patch to use bitmap_zalloc.
   - Stop allowing enabling of buffers with no channels enabled.
   - Drop unused 'stufftoread' from iio_buffer.
   - Drop scan_el_attrs form iio_buffer as unused.
   - Reorder sanity checks in __iio_device_register to fail earlier.
   - Drop all the devm_ runregister / free functions from IIO as they
     were never used and encourage poor design.
 * dma-buffer
   - Tidy up includes.
 * dma-engine-buffer
   - Provide dev-managed allocator.
   - Fix an issue with printing a size_t
 * cross subsystem (kxsd9, bmg160, mpu3050, bmi160, mpu6050, bmc150)
   - Replace some unnecessary casts of error ptrs and whilst there.
     use the %pe printf parameter to print them in a more useful fashion.
 * cross subsystem
   - Drop casts in calls to regmap_bulk_read as they make no sense.
   - Use devm_platform_ioremap_resource to reduce boilerplate.
   - Fix typos in Analog Devices.
 * counters/104-quad
   - Add Syed Nayyar Waris as an additional maintainer.
 * ad7476
   - Generate CONVST signal internally rather than requiring external
     trigger.  Add sysfs read back as can now do so.
   - use devm_add_action_or_reset to tidy up error and remove handling.
 * ad7793
   - Switch to read_avail from explicit attribute. Mostly done to avoid
     confusing people with a - sign (without surounding spaces) that
     was correct but checkpatch didn't like.
 * adis library
   - Add missing newlines at end of error messages.
 * adis16400
   - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR.
 * adis16460
   - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR.
 * ad_sigma_delta
   - Move some channel definitions into individual drivers to avoid
     having to deal with complex options.
 * ak8974
   - Silence an error on deffered probe.
 * bmp280
   - Harden against IRQ before registration.
   - Convert to read_avail instead of opencoding the equivalent.
   - Explicitly mark GPIO as optional.
   - Cleanup casts.
   - Remove line breaks from strings.
 * htts221
   - Replace direct access to platform_data with dev_get_platdata().
   - Use device properties rather than device tree ones to allow ACPI
     probing.
   - Casting cleanups.
 * intel_mrfld_adc
   - Don't use unaligned accessor for aligned data.
 * isl29125
   - Reorder buer pre and post hooks to allow for coming core rework.
 * ltc2983
   - Remove comp to bool.
 * max1363
   - Stop using mlock from the iio_dev directly in favour of a local lock
     with clearly defined scope.
 * max30100
   - Use generic device properties to allow ACPI probe.
 * mpu6050
   - Convert to i2c_new_client_device.
   - Add debugfs register access.
 * st_lsm6dsx
   - Provide means of configuring full scale on slave device if supported.
   - Drop include of st_sensors header to get one value. Its not otherwise
     used by this driver.
 * st-sensors
   - Replace direct access to platform_data with dev_get_platdata().
   - Casting cleanups.
   - Avoid splitting strings.
 * st_uvis25
   - Casting cleanups.
 * tsl2563
   - Typo fix.
 * tsl2772
   - scnprintf in a non obvious string building usecase. Note also 'fixes'
     a wrong calculation of remaining space that couldn't actually cause
     any trouble as there was lots of room.
 * xilinx-xadc
   - Fix Lars-Peter spelling his own name wrong :) + additional typos.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAl6gicARHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0Foj3ig//XRAAHRSfzXFpvYxITVKDIGwP/giYdp91
 OflGw/0aOZFExr72ENLmCArXZPOT2qAZyNNoDNvuJ9SkcVDf4bT3w9gYwWtJ1sd7
 Hhh+1JpPspSo6vS85FMjm37UDfSbmYqB6wC57cZ5pKQIiJwi6W2hGsyOoOXmfLLc
 57d3mlg4g3KLl9Hl4UTU84gE1ushKQgNxVH21Y71pOTa8p+xbWWcspWjR2Jf+kVZ
 qPr2+2rP/AjeAVLu9SKfdBiczYQCNR3uFWKkOKsBE9fq3sbcN6NT5DktrSJUH+qU
 zfUGmShCEP908/9fARazXQZcTOX1tIUOnrpHG9l54GNPh3S2Qk9xGaZxvQy5sguC
 AmC4p+MaIMrMcgWMk9po+nE5INJq7HBV/0jnADG307wEhFrKrjh/2PtP4f9k/Mcv
 sHB7K1+dcJAUwFb5gccdDBfmKMnwfnGS8OFGLXZZKBIDqSvptmIs/pmavjEPgqhV
 GwGTDPyZKeyDnyhTXGafxii03Q2I62Zte5l4jcZ+q8Q4UMxQovEkX6IvUpXwA0Kk
 eoxedbgdvzxrDNiNrXa0k6CLzqSQW+aVHgJG+HEig4IXQse8zXb11HCs35zq5r4j
 JI2UjLk3zUHLiNR/Ir9fKAbPwWSWv3IWkfmFEEUWvUFjM+Xot1Hg+61vBTFKo4iK
 EIqqPZmd5Mk=
 =DyTF
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-5.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new IIO device support, features and cleanup for the 5.8 cycle

Usual mix of new drivers, new support in old drivers and lots of minor
cleanup. Yaml conversions also continue to trickle in (plenty more to go!)

New device support
* ad7476
  - Add ad7091 support (ID only)
* ad9467
  - New driver for this 200/250 MSPS adi-axi-adc and SPI attached ADC.
* adi-axi-adc
  - New driver to support ADIs generic AXI ADC IP core, used to provide
    high speed interfaces to ADCs (JESD204B/C or parallel interfaces). Usually
    paired with a device using a slow configuration interface (spi etc)
    Includes DT bindings and some fixes for fpga headers.
* bmg160
  - Add support for BMI088 (ID only)
* max1241
  - New driver for this ADC.
* st_sensors
  - Add support for LIS2HH12 accelerometer
* sx9310
  - New driver supporting sx9310 and sx9311 proximity sensors.

Yaml DT binding conversions
* rockchip-saradc (including adding some missing parts)
* stm32-dac
* tsl2563
* vcnl4000

Features
* st_lsm6dsx
  - Add LIS3MDL as a possible sensor hub device.
* vcnl4000
  - Add new concept of near level (from DT) to provide to userspace which
    often needs to have some calibrated concept of 'near'.

Cleanups, minor fixes etc.
* core
  - Use snprintf for functions where strings are built and there is
    potential for overflow.
  - Correct docs to indicate mlock should not be used directly by drivers.
  - Fix up accidental dropping of a patch to use bitmap_zalloc.
  - Stop allowing enabling of buffers with no channels enabled.
  - Drop unused 'stufftoread' from iio_buffer.
  - Drop scan_el_attrs form iio_buffer as unused.
  - Reorder sanity checks in __iio_device_register to fail earlier.
  - Drop all the devm_ runregister / free functions from IIO as they
    were never used and encourage poor design.
* dma-buffer
  - Tidy up includes.
* dma-engine-buffer
  - Provide dev-managed allocator.
  - Fix an issue with printing a size_t
* cross subsystem (kxsd9, bmg160, mpu3050, bmi160, mpu6050, bmc150)
  - Replace some unnecessary casts of error ptrs and whilst there.
    use the %pe printf parameter to print them in a more useful fashion.
* cross subsystem
  - Drop casts in calls to regmap_bulk_read as they make no sense.
  - Use devm_platform_ioremap_resource to reduce boilerplate.
  - Fix typos in Analog Devices.
* counters/104-quad
  - Add Syed Nayyar Waris as an additional maintainer.
* ad7476
  - Generate CONVST signal internally rather than requiring external
    trigger.  Add sysfs read back as can now do so.
  - use devm_add_action_or_reset to tidy up error and remove handling.
* ad7793
  - Switch to read_avail from explicit attribute. Mostly done to avoid
    confusing people with a - sign (without surounding spaces) that
    was correct but checkpatch didn't like.
* adis library
  - Add missing newlines at end of error messages.
* adis16400
  - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR.
* adis16460
  - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR.
* ad_sigma_delta
  - Move some channel definitions into individual drivers to avoid
    having to deal with complex options.
* ak8974
  - Silence an error on deffered probe.
* bmp280
  - Harden against IRQ before registration.
  - Convert to read_avail instead of opencoding the equivalent.
  - Explicitly mark GPIO as optional.
  - Cleanup casts.
  - Remove line breaks from strings.
* htts221
  - Replace direct access to platform_data with dev_get_platdata().
  - Use device properties rather than device tree ones to allow ACPI
    probing.
  - Casting cleanups.
* intel_mrfld_adc
  - Don't use unaligned accessor for aligned data.
* isl29125
  - Reorder buer pre and post hooks to allow for coming core rework.
* ltc2983
  - Remove comp to bool.
* max1363
  - Stop using mlock from the iio_dev directly in favour of a local lock
    with clearly defined scope.
* max30100
  - Use generic device properties to allow ACPI probe.
* mpu6050
  - Convert to i2c_new_client_device.
  - Add debugfs register access.
* st_lsm6dsx
  - Provide means of configuring full scale on slave device if supported.
  - Drop include of st_sensors header to get one value. Its not otherwise
    used by this driver.
* st-sensors
  - Replace direct access to platform_data with dev_get_platdata().
  - Casting cleanups.
  - Avoid splitting strings.
* st_uvis25
  - Casting cleanups.
* tsl2563
  - Typo fix.
* tsl2772
  - scnprintf in a non obvious string building usecase. Note also 'fixes'
    a wrong calculation of remaining space that couldn't actually cause
    any trouble as there was lots of room.
* xilinx-xadc
  - Fix Lars-Peter spelling his own name wrong :) + additional typos.

* tag 'iio-for-5.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (101 commits)
  iio: magnetometer: ak8974: Silence deferred-probe error
  Documentation: ABI: document IIO in_proximity_nearlevel file
  iio: vcnl4000: Export near level property for proximity sensor
  dt-bindings: iio: light: vcnl4000: Add proximity-near-level
  dt-bindings: iio: Introduce common properties for iio sensors
  dt-bindings: iio: vcnl4000: convert bindings to YAML format
  iio: Fix misspellings of "Analog Devices"
  iio: light: isl29125: fix iio_triggered_buffer_{predisable,postenable} positions
  iio: adc: fsl-imx25-gcq: Use devm_platform_ioremap_resource
  iio: adc: at91-adc: Use devm_platform_ioremap_resource
  iio: adc: sun4i-gpadc-iio: Use devm_platform_ioremap_resource
  iio:light:ltr501: Drop unnecessary cast of parameter in regmap_bulk_read
  iio:magn:mmc35240: Drop unnecessary casts of val parameter in regmap_bulk*
  iio:imu:mpu6050: Tidy up parameters to regmap_bulk functions.
  iio:chemical:bme680: Tidy up parameters to regmap_bulk_read
  iio:chemical:atlas-sensor: Drop unnecessary explicit casts in regmap_bulk_read calls
  iio:accel:mxc4005: Drop unnecessary explicit casts in regmap_bulk_read calls
  iio: imu: st_lsm6dsx: drop huge include in sensor-hub driver
  iio: buffer: drop devm_iio_kfifo_free() API call
  iio: buffer: drop devm_iio_hw_consumer_free() API call
  ...
 2020-04-23 11:06:48 +02:00
Mauro Carvalho Chehab
0c1bc6b845 docs: filesystems: fix renamed references 
Some filesystem references got broken by a previous patch
series I submitted. Address those.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: David Sterba <dsterba@suse.com> # fs/affs/Kconfig
Link: https://lore.kernel.org/r/57318c53008dbda7f6f4a5a9e5787f4d37e8565a.1586881715.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
 2020-04-20 15:45:22 -06:00
Andrew Lunn
db30a57779 net: Add testing sysfs attribute 
Similar to speed, duplex and dorment, report the testing status
in sysfs.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2020-04-20 12:43:24 -07:00
Mark Gross
7e5b3c267d x86/speculation: Add Special Register Buffer Data Sampling (SRBDS) mitigation 
SRBDS is an MDS-like speculative side channel that can leak bits from the
random number generator (RNG) across cores and threads. New microcode
serializes the processor access during the execution of RDRAND and
RDSEED. This ensures that the shared buffer is overwritten before it is
released for reuse.

While it is present on all affected CPU models, the microcode mitigation
is not needed on models that enumerate ARCH_CAPABILITIES[MDS_NO] in the
cases where TSX is not supported or has been disabled with TSX_CTRL.

The mitigation is activated by default on affected processors and it
increases latency for RDRAND and RDSEED instructions. Among other
effects this will reduce throughput from /dev/urandom.

* Enable administrator to configure the mitigation off when desired using
  either mitigations=off or srbds=off.

* Export vulnerability status via sysfs

* Rename file-scoped macros to apply for non-whitelist table initializations.

 [ bp: Massage,
   - s/VULNBL_INTEL_STEPPING/VULNBL_INTEL_STEPPINGS/g,
   - do not read arch cap MSR a second time in tsx_fused_off() - just pass it in,
   - flip check in cpu_set_bug_bits() to save an indentation level,
   - reflow comments.
   jpoimboe: s/Mitigated/Mitigation/ in user-visible strings
   tglx: Dropped the fused off magic for now
 ]

Signed-off-by: Mark Gross <mgross@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Neelima Krishnan <neelima.krishnan@intel.com>
 2020-04-20 12:19:22 +02:00
Guido Günther
aa8cb04855 Documentation: ABI: document IIO in_proximity_nearlevel file 
The vcnl4000 IIO driver introduced a new attribute
"in_proximity_nearlevel".  This adds it to the list of documented ABI
for sysfs-bus-iio.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2020-04-19 16:56:43 +01:00
Daeho Jeong
2bc4bea338 f2fs: add tracepoint for f2fs iostat 
Added a tracepoint to see iostat of f2fs. Default period of that
is 3 second. This tracepoint can be used to be monitoring
I/O statistics periodically.

Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
 2020-04-17 09:16:57 -07:00
Jaegeuk Kim
da9953b729 f2fs: introduce sysfs/data_io_flag to attach REQ_META/FUA 
This patch introduces a way to attach REQ_META/FUA explicitly
to all the data writes given temperature.

-> attach REQ_FUA to Hot Data writes

-> attach REQ_FUA to Hot|Warm Data writes

-> attach REQ_FUA to Hot|Warm|Cold Data writes

-> attach REQ_FUA to Hot|Warm|Cold Data writes as well as
          REQ_META to Hot Data writes

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
 2020-04-16 14:41:52 -07:00
Dave Jiang
c2ce6bbcfc dmaengine: idxd: export hw version through sysfs 
Some user apps would like to know the hardware version in order to
determine the variation of the hardware. Export the hardware version number
to userspace via sysfs.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/158696714008.39484.13401950732606906479.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
 2020-04-15 21:54:00 +05:30
Mauro Carvalho Chehab
54f38fcae5 media: docs: move uAPI book to userspace-api/media 
Since 2017, there is an space reserved for userspace API,
created by changeset 1d596dee38 ("docs: Create a user-space API guide").

As the media subsystem was one of the first subsystems to use
Sphinx, until this patch, we were keeping things on a separate
place.

Let's just use the new location, as having all uAPI altogether
will likely make things easier for developers.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
 2020-04-14 10:31:49 +02:00
Pali Rohár
149ed3d404 change email address for Pali Rohár 
For security reasons I stopped using gmail account and kernel address is
now up-to-date alias to my personal address.

People periodically send me emails to address which they found in source
code of drivers, so this change reflects state where people can contact
me.

[ Added .mailmap entry as per Joe Perches  - Linus ]
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joe Perches <joe@perches.com>
Link: http://lkml.kernel.org/r/20200307104237.8199-1-pali@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-04-10 15:36:22 -07:00
Linus Torvalds
f40f31cadc f2fs-for-5.7-rc1 
In this round, we've mainly focused on fixing bugs and addressing issues in
 recently introduced compression support.
 
 Enhancement:
 - add zstd support, and set LZ4 by default
 - add ioctl() to show # of compressed blocks
 - show mount time in debugfs
 - replace rwsem with spinlock
 - avoid lock contention in DIO reads
 
 Some major bug fixes wrt compression:
 - compressed block count
 - memory access and leak
 - remove obsolete fields
 - flag controls
 
 Other bug fixes and clean ups:
 - fix overflow when handling .flags in inode_info
 - fix SPO issue during resize FS flow
 - fix compression with fsverity enabled
 - potential deadlock when writing compressed pages
 - show missing mount options
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE00UqedjCtOrGVvQiQBSofoJIUNIFAl6L5f0ACgkQQBSofoJI
 UNImoQ/7BHKpwgpgH/DuydO9ess0XuUgQPQxyj+LE79l0jdBo8FxQZJVNAekx2+h
 ANTDHjsgqry6xuczOJXzFhECoOrCqZuffrkQM1p3owfzOH9Wrx6aiOomFBJyk/WB
 kXAY7LDPUwGF5uDB8tvVhM082qLXOlP0coO57f9Ip/OpaG8YOkti+KbcOKJrJ9o3
 63IAzu89D/9XJw8834rDSersiEenSJm3jLC12uOxgXMzjDb1Ul1JH0P51gEu6g6O
 3df5tiGJcFfaKVVWPHG+UEfav6mvi28+zU9f+dSmL0Wvb8dIqSgUf6ty8KCuRBYw
 kQYi+E0G1dcGi99AitCOrFxzY+oEo/A5wq2HDI6RkNlu6krD8qYNyWcMbP7dNHnU
 /5BVN+5d78iR1vKZpTo4X6dojf6B21Tn/OmABSZ5d7B6pI2fY5bjy2WgSLSY7YvP
 A6sepb9RAAGvpKvvkHI7gYwDKFMel+vfD6em1SKH5iKaDC0rJTUDUy8PTz/qMPBS
 vMn396dLx+TzTa0dZUuSF8NNk6sPZEReC3AuMNAIPSKiuD7tatRxvutHeEg5ktrr
 ggOQB67MfKjPMBKmgMIm6XMuILcCGIB1MqbPRlyKtC6rjdMPIKKOfeHJlLFmYwfF
 gqvCIFlW4DlxHpHH+LbUFKoUA3zofltL91SHUVATJjmiZIT2pqQ=
 =FVxq
 -----END PGP SIGNATURE-----

Merge tag 'f2fs-for-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs

Pull f2fs updates from Jaegeuk Kim:
 "In this round, we've mainly focused on fixing bugs and addressing
  issues in recently introduced compression support.

  Enhancement:
   - add zstd support, and set LZ4 by default
   - add ioctl() to show # of compressed blocks
   - show mount time in debugfs
   - replace rwsem with spinlock
   - avoid lock contention in DIO reads

  Some major bug fixes wrt compression:
   - compressed block count
   - memory access and leak
   - remove obsolete fields
   - flag controls

  Other bug fixes and clean ups:
   - fix overflow when handling .flags in inode_info
   - fix SPO issue during resize FS flow
   - fix compression with fsverity enabled
   - potential deadlock when writing compressed pages
   - show missing mount options"

* tag 'f2fs-for-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (66 commits)
  f2fs: keep inline_data when compression conversion
  f2fs: fix to disable compression on directory
  f2fs: add missing CONFIG_F2FS_FS_COMPRESSION
  f2fs: switch discard_policy.timeout to bool type
  f2fs: fix to verify tpage before releasing in f2fs_free_dic()
  f2fs: show compression in statx
  f2fs: clean up dic->tpages assignment
  f2fs: compress: support zstd compress algorithm
  f2fs: compress: add .{init,destroy}_decompress_ctx callback
  f2fs: compress: fix to call missing destroy_compress_ctx()
  f2fs: change default compression algorithm
  f2fs: clean up {cic,dic}.ref handling
  f2fs: fix to use f2fs_readpage_limit() in f2fs_read_multi_pages()
  f2fs: xattr.h: Make stub helpers inline
  f2fs: fix to avoid double unlock
  f2fs: fix potential .flags overflow on 32bit architecture
  f2fs: fix NULL pointer dereference in f2fs_verity_work()
  f2fs: fix to clear PG_error if fsverity failed
  f2fs: don't call fscrypt_get_encryption_info() explicitly in f2fs_tmpfile()
  f2fs: don't trigger data flush in foreground operation
  ...
 2020-04-07 13:48:26 -07:00
Linus Torvalds
d38c07afc3 powerpc updates for 5.7 
- A large series from Nick for 64-bit to further rework our exception vectors,
    and rewrite portions of the syscall entry/exit and interrupt return in C. The
    result is much easier to follow code that is also faster in general.
 
  - Cleanup of our ptrace code to split various parts out that had become badly
    intertwined with #ifdefs over the years.
 
  - Changes to our NUMA setup under the PowerVM hypervisor which should
    hopefully avoid non-sensical topologies which can lead to warnings from the
    workqueue code and other problems.
 
  - MAINTAINERS updates to remove some of our old orphan entries and update the
    status of others.
 
  - Quite a few other small changes and fixes all over the map.
 
 Thanks to:
   Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew Donnellan, Aneesh
   Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen Zhou, Christophe JAILLET,
   Christophe Leroy, Christoph Hellwig, Clement Courbet, Daniel Axtens, David
   Gibson, Douglas Miller, Fabiano Rosas, Fangrui Song, Ganesh Goudar, Gautham R.
   Shenoy, Greg Kroah-Hartman, Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie
   Halip, Jan Kara, Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger,
   Laurentiu Tudor, Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh
   Salgaonkar, Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira,
   Michael Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan
   Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers,
   Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat, Rasmus Villemoes, Ravi
   Bangoria, Roman Bolshakov, Sam Bobroff, Sandipan Das, Santosh S, Sedat Dilek,
   Segher Boessenkool, Shilpasri G Bhat, Sourabh Jain, Srikar Dronamraju, Stephen
   Rothwell, Tyrel Datwyler, Vaibhav Jain, YueHaibing.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl6JypATHG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgOTyD/0U90tXb3VXlQcc4OFIb8vWIj76k4Zn
 ZSZ7RyOuvb5pCISBZjSK79XkR9eMHT77qagX4V41q64k4yQl8nbgLeVnwL76hLLc
 IJCs23f4nsO0uqX/MhSCc5dfOOOS2i8V+OQYtsYWsH5QaG95v0cHIqVaHHMlfQxu
 507GO/W5W6KTd4x008b5unQOuE51zMKlKvqEJXkT59obQFpaa2S5Wn7OzhsnarCH
 YSRNxaC7vtgBKLA9wUnFh8UUbh0FbOwXBCaq4OhHMhgRihdteVBCzlcR/6c+IRbt
 EoZxKzfQ0hI1z5f++kJNaRXMtUbSpM8D1HdKKHgiWjpdBSD0eu2X106KQT2R2ZOF
 qhX8xPLWNzdBglA6L43AaZUu+4ayd3QrrJIkjDv/K1rCHZjfGOzSQfoZgTEBNLFA
 tC0crhEfw8m98e4EwhCtekGQxdczRdLS9YvtC/h6mU2xkpA35yNSwB1/iuVQdkYD
 XyrEqImAQ1PJla7NL0hxSy5ZxrBtMeKT4WZZ0BNgKXryemldg8Tuv3AEyach3BHz
 eU0pIwpbnPm1JAPyrpDQ1yEf7QsD77gTPfEvilEci60R9DhvIMGAY+pt0qfME3yX
 wOLp2yVBEXlRmvHk/y/+r+m4aCsmwSrikbWwmLLwAAA6JehtzFOWxTEfNpACP23V
 mZyyZznsHIIE3Q==
 =ARdm
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Slightly late as I had to rebase mid-week to insert a bug fix:

   - A large series from Nick for 64-bit to further rework our exception
     vectors, and rewrite portions of the syscall entry/exit and
     interrupt return in C. The result is much easier to follow code
     that is also faster in general.

   - Cleanup of our ptrace code to split various parts out that had
     become badly intertwined with #ifdefs over the years.

   - Changes to our NUMA setup under the PowerVM hypervisor which should
     hopefully avoid non-sensical topologies which can lead to warnings
     from the workqueue code and other problems.

   - MAINTAINERS updates to remove some of our old orphan entries and
     update the status of others.

   - Quite a few other small changes and fixes all over the map.

  Thanks to: Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew
  Donnellan, Aneesh Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen
  Zhou, Christophe JAILLET, Christophe Leroy, Christoph Hellwig, Clement
  Courbet, Daniel Axtens, David Gibson, Douglas Miller, Fabiano Rosas,
  Fangrui Song, Ganesh Goudar, Gautham R. Shenoy, Greg Kroah-Hartman,
  Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie Halip, Jan Kara,
  Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger, Laurentiu Tudor,
  Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh Salgaonkar,
  Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira, Michael
  Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan
  Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick
  Desaulniers, Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat,
  Rasmus Villemoes, Ravi Bangoria, Roman Bolshakov, Sam Bobroff,
  Sandipan Das, Santosh S, Sedat Dilek, Segher Boessenkool, Shilpasri G
  Bhat, Sourabh Jain, Srikar Dronamraju, Stephen Rothwell, Tyrel
  Datwyler, Vaibhav Jain, YueHaibing"

* tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (158 commits)
  powerpc: Make setjmp/longjmp signature standard
  powerpc/cputable: Remove unnecessary copy of cpu_spec->oprofile_type
  powerpc: Suppress .eh_frame generation
  powerpc: Drop -fno-dwarf2-cfi-asm
  powerpc/32: drop unused ISA_DMA_THRESHOLD
  powerpc/powernv: Add documentation for the opal sensor_groups sysfs interfaces
  selftests/powerpc: Fix try-run when source tree is not writable
  powerpc/vmlinux.lds: Explicitly retain .gnu.hash
  powerpc/ptrace: move ptrace_triggered() into hw_breakpoint.c
  powerpc/ptrace: create ppc_gethwdinfo()
  powerpc/ptrace: create ptrace_get_debugreg()
  powerpc/ptrace: split out ADV_DEBUG_REGS related functions.
  powerpc/ptrace: move register viewing functions out of ptrace.c
  powerpc/ptrace: split out TRANSACTIONAL_MEM related functions.
  powerpc/ptrace: split out SPE related functions.
  powerpc/ptrace: split out ALTIVEC related functions.
  powerpc/ptrace: split out VSX related functions.
  powerpc/ptrace: drop PARAMETER_SAVE_AREA_OFFSET
  powerpc/ptrace: drop unnecessary #ifdefs CONFIG_PPC64
  powerpc/ptrace: remove unused header includes
  ...
 2020-04-05 11:12:59 -07:00
Linus Torvalds
0ad5b053d4 Char/Misc driver patches for 5.7-rc1 
Here is the big set of char/misc/other driver patches for 5.7-rc1.
 
 Lots of things in here, and it's later than expected due to some reverts
 to resolve some reported issues.  All is now clean with no reported
 problems in linux-next.
 
 Included in here is:
 	- interconnect updates
 	- mei driver updates
 	- uio updates
 	- nvmem driver updates
 	- soundwire updates
 	- binderfs updates
 	- coresight updates
 	- habanalabs updates
 	- mhi new bus type and core
 	- extcon driver updates
 	- some Kconfig cleanups
 	- other small misc driver cleanups and updates
 
 As mentioned, all have been in linux-next for a while, and with the last
 two reverts, all is calm and good.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodfvA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynzCQCfROhar3E8EhYEqSOP6xq6uhX9uegAnRgGY2rs
 rN4JJpOcTddvZcVlD+vo
 =ocWk
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big set of char/misc/other driver patches for 5.7-rc1.

  Lots of things in here, and it's later than expected due to some
  reverts to resolve some reported issues. All is now clean with no
  reported problems in linux-next.

  Included in here is:
   - interconnect updates
   - mei driver updates
   - uio updates
   - nvmem driver updates
   - soundwire updates
   - binderfs updates
   - coresight updates
   - habanalabs updates
   - mhi new bus type and core
   - extcon driver updates
   - some Kconfig cleanups
   - other small misc driver cleanups and updates

  As mentioned, all have been in linux-next for a while, and with the
  last two reverts, all is calm and good"

* tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits)
  Revert "driver core: platform: Initialize dma_parms for platform devices"
  Revert "amba: Initialize dma_parms for amba devices"
  amba: Initialize dma_parms for amba devices
  driver core: platform: Initialize dma_parms for platform devices
  bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device()
  bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture
  bus: mhi: core: Add support for reading MHI info from device
  misc: rtsx: set correct pcr_ops for rts522A
  speakup: misc: Use dynamic minor numbers for speakup devices
  mei: me: add cedar fork device ids
  coresight: do not use the BIT() macro in the UAPI header
  Documentation: provide IBM contacts for embargoed hardware
  nvmem: core: remove nvmem_sysfs_get_groups()
  nvmem: core: use is_bin_visible for permissions
  nvmem: core: use device_register and device_unregister
  nvmem: core: add root_only member to nvmem device struct
  extcon: axp288: Add wakeup support
  extcon: Mark extcon_get_edev_name() function as exported symbol
  extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER
  dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format
  ...
 2020-04-03 13:22:40 -07:00
Linus Torvalds
72f35423e8 Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 
Pull crypto updates from Herbert Xu:
 "API:
   - Fix out-of-sync IVs in self-test for IPsec AEAD algorithms

  Algorithms:
   - Use formally verified implementation of x86/curve25519

  Drivers:
   - Enhance hwrng support in caam

   - Use crypto_engine for skcipher/aead/rsa/hash in caam

   - Add Xilinx AES driver

   - Add uacce driver

   - Register zip engine to uacce in hisilicon

   - Add support for OCTEON TX CPT engine in marvell"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits)
  crypto: af_alg - bool type cosmetics
  crypto: arm[64]/poly1305 - add artifact to .gitignore files
  crypto: caam - limit single JD RNG output to maximum of 16 bytes
  crypto: caam - enable prediction resistance in HRWNG
  bus: fsl-mc: add api to retrieve mc version
  crypto: caam - invalidate entropy register during RNG initialization
  crypto: caam - check if RNG job failed
  crypto: caam - simplify RNG implementation
  crypto: caam - drop global context pointer and init_done
  crypto: caam - use struct hwrng's .init for initialization
  crypto: caam - allocate RNG instantiation descriptor with GFP_DMA
  crypto: ccree - remove duplicated include from cc_aead.c
  crypto: chelsio - remove set but not used variable 'adap'
  crypto: marvell - enable OcteonTX cpt options for build
  crypto: marvell - add the Virtual Function driver for CPT
  crypto: marvell - add support for OCTEON TX CPT engine
  crypto: marvell - create common Kconfig and Makefile for Marvell
  crypto: arm/neon - memzero_explicit aes-cbc key
  crypto: bcm - Use scnprintf() for avoiding potential buffer overflow
  crypto: atmel-i2c - Fix wakeup fail
  ...
 2020-04-01 14:47:40 -07:00
Shilpasri G Bhat
32377bd2cb powerpc/powernv: Add documentation for the opal sensor_groups sysfs interfaces 
Commit bf9571550f ("powerpc/powernv: Add support to clear sensor
groups data") added a mechanism to clear sensor-group data via a sysfs
interface. However, the ABI for that interface has not been
documented.

This patch documents the ABI for the sysfs interface for sensor-groups
and clearing the sensor-groups.

This patch was originally sent by Shilpasri G Bhat on the mailing list:
https://lkml.org/lkml/2018/8/1/85

Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1574776274-22355-1-git-send-email-ego@linux.vnet.ibm.com
 2020-04-01 14:30:50 +11:00
Linus Torvalds
1f944f976d TTY/Serial patches for 5.7-rc1 
Here is the big set of TTY / Serial patches for 5.7-rc1
 
 Lots of console fixups and reworking in here, serial core tweaks
 (doesn't that ever get old, why are we still creating new serial
 devices?), serial driver updates, line-protocol driver updates, and some
 vt cleanups and fixes included in here as well.
 
 All have been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXoHT8w8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yl3CwCgj/97IKb4K49nV2rDgiV+t/ELWqUAnjBp+Zpd
 H2BEdhwCFhq/5CJHKXWH
 =JTm1
 -----END PGP SIGNATURE-----

Merge tag 'tty-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial updates from Greg KH:
 "Here is the big set of TTY / Serial patches for 5.7-rc1

  Lots of console fixups and reworking in here, serial core tweaks
  (doesn't that ever get old, why are we still creating new serial
  devices?), serial driver updates, line-protocol driver updates, and
  some vt cleanups and fixes included in here as well.

  All have been in linux-next with no reported issues"

* tag 'tty-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (161 commits)
  serial: 8250: Optimize irq enable after console write
  serial: 8250: Fix rs485 delay after console write
  vt: vt_ioctl: fix use-after-free in vt_in_use()
  vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use virtual console
  tty: serial: make SERIAL_SPRD depend on COMMON_CLK
  tty: serial: fsl_lpuart: fix return value checking
  tty: serial: fsl_lpuart: move dma_request_chan()
  ARM: dts: tango4: Make /serial compatible with ns16550a
  ARM: dts: mmp*: Make the serial ports compatible with xscale-uart
  ARM: dts: mmp*: Fix serial port names
  ARM: dts: mmp2-brownstone: Don't redeclare phandle references
  ARM: dts: pxa*: Make the serial ports compatible with xscale-uart
  ARM: dts: pxa*: Fix serial port names
  ARM: dts: pxa*: Don't redeclare phandle references
  serial: omap: drop unused dt-bindings header
  serial: 8250: 8250_omap: Add DMA support for UARTs on K3 SoCs
  serial: 8250: 8250_omap: Work around errata causing spurious IRQs with DMA
  serial: 8250: 8250_omap: Extend driver data to pass FIFO trigger info
  serial: 8250: 8250_omap: Move locking out from __dma_rx_do_complete()
  serial: 8250: 8250_omap: Account for data in flight during DMA teardown
  ...
 2020-03-31 16:18:55 -07:00
Linus Torvalds
b3aa112d57 selinux/stable-5.7 PR 20200330 
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAl6Ch6wUHHBhdWxAcGF1
 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXPdcg/9FDMS/n0Xl1HQBUyu26EwLu3aUpNE
 BdghXW1LKSTp7MrOENE60PGzZSAiC07ci1DqFd7zfLPZf2q5IwPwOBa/Avy8z95V
 oHKqcMT6WO1SPOm/PxZn16FCKyET4gZDTXvHBAyiyFsbk36R522ZY615P9T3eLu/
 ZA1NFsSjj68SqMCUlAWfeqjcbQiX63bryEpugOIg0qWy7R/+rtWxj9TjriZ+v9tq
 uC45UcjBqphpmoPG8BifA3jjyclwO3DeQb5u7E8//HPPraGeB19ntsymUg7ljoGk
 NrqCkZtv6E+FRCDTR5f0O7M1T4BWJodxw2NwngnTwKByLC25EZaGx80o+VyMt0eT
 Pog+++JZaa5zZr2OYOtdlPVMLc2ALL6p/8lHOqFU3GKfIf04hWOm6/Lb2IWoXs3f
 CG2b6vzoXYyjbF0Q7kxadb8uBY2S1Ds+CVu2HMBBsXsPdwbbtFWOT/6aRAQu61qn
 PW+f47NR8By3SO6nMzWts2SZEERZNIEdSKeXHuR7As1jFMXrHLItreb4GCSPay5h
 2bzRpxt2br5CDLh7Jv2pZnHtUqBWOSbslTix77+Z/hPKaNowvD9v3tc5hX87rDmB
 dYXROD6/KoyXFYDcMdphlvORFhqGqd5bEYuHHum/VjSIRh237+/nxFY/vZ4i4bzU
 2fvpAmUlVX1c4rw=
 =LlWA
 -----END PGP SIGNATURE-----

Merge tag 'selinux-pr-20200330' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux

Pull SELinux updates from Paul Moore:
 "We've got twenty SELinux patches for the v5.7 merge window, the
  highlights are below:

   - Deprecate setting /sys/fs/selinux/checkreqprot to 1.

     This flag was originally created to deal with legacy userspace and
     the READ_IMPLIES_EXEC personality flag. We changed the default from
     1 to 0 back in Linux v4.4 and now we are taking the next step of
     deprecating it, at some point in the future we will take the final
     step of rejecting 1.

   - Allow kernfs symlinks to inherit the SELinux label of the parent
     directory. In order to preserve backwards compatibility this is
     protected by the genfs_seclabel_symlinks SELinux policy capability.

   - Optimize how we store filename transitions in the kernel, resulting
     in some significant improvements to policy load times.

   - Do a better job calculating our internal hash table sizes which
     resulted in additional policy load improvements and likely general
     SELinux performance improvements as well.

   - Remove the unused initial SIDs (labels) and improve how we handle
     initial SIDs.

   - Enable per-file labeling for the bpf filesystem.

   - Ensure that we properly label NFS v4.2 filesystems to avoid a
     temporary unlabeled condition.

   - Add some missing XFS quota command types to the SELinux quota
     access controls.

   - Fix a problem where we were not updating the seq_file position
     index correctly in selinuxfs.

   - We consolidate some duplicated code into helper functions.

   - A number of list to array conversions.

   - Update Stephen Smalley's email address in MAINTAINERS"

* tag 'selinux-pr-20200330' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: clean up indentation issue with assignment statement
  NFS: Ensure security label is set for root inode
  MAINTAINERS: Update my email address
  selinux: avtab_init() and cond_policydb_init() return void
  selinux: clean up error path in policydb_init()
  selinux: remove unused initial SIDs and improve handling
  selinux: reduce the use of hard-coded hash sizes
  selinux: Add xfs quota command types
  selinux: optimize storage of filename transitions
  selinux: factor out loop body from filename_trans_read()
  security: selinux: allow per-file labeling for bpffs
  selinux: generalize evaluate_cond_node()
  selinux: convert cond_expr to array
  selinux: convert cond_av_list to array
  selinux: convert cond_list to array
  selinux: sel_avc_get_stat_idx should increase position index
  selinux: allow kernfs symlinks to inherit parent directory context
  selinux: simplify evaluate_cond_node()
  Documentation,selinux: deprecate setting checkreqprot to 1
  selinux: move status variables out of selinux_ss
 2020-03-31 15:07:55 -07:00
Linus Torvalds
4c6ef3b156 Staging/IIO driver patches for 5.7-rc1 
Here is the big staging and IIO driver pull request for 5.7-rc1.
 
 We again end up deleting more code than we added here, thanks to finally
 getting rid of the old and obsolete wireless USB stuff, and the exfat
 code (which is coming in again through the vfs tree in a much cleaner
 version).  But some code does come back, with the octeon drivers being
 found to actually be used in the wild, so those deletions are now
 reverted.
 
 Other than those major things, just loads and loads of tiny checkpatch
 cleanups all over the place, along with new IIO drivers and fixes.
 
 All have been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXoHJ8Q8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymG9QCfV5RuRdWIPp6QrcuNMnq1iSxoBogAn000kll0
 WOqyNH5P886tyBGAdtkS
 =lfyo
 -----END PGP SIGNATURE-----

Merge tag 'staging-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO driver updates from Greg KH:
 "Here is the big staging and IIO driver pull request for 5.7-rc1.

  We again end up deleting more code than we added here, thanks to
  finally getting rid of the old and obsolete wireless USB stuff, and
  the exfat code (which is coming in again through the vfs tree in a
  much cleaner version).

  But some code does come back, with the octeon drivers being found to
  actually be used in the wild, so those deletions are now reverted.

  Other than those major things, just loads and loads of tiny checkpatch
  cleanups all over the place, along with new IIO drivers and fixes.

  All have been in linux-next with no reported issues"

[ Stephen Rothwell points out some reported issues due to merge conflicts ]

* tag 'staging-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (415 commits)
  staging: vt6656: Use DIV_ROUND_UP macro instead of specific code
  staging: remove hp100 driver
  staging: wilc1000: Use crc7 in lib/ rather than a private copy
  Staging: rtl8192u: ieee80211: Use netdev_alert().
  Staging: rtl8192u: ieee80211: Use netdev_info() with network devices.
  Staging: rtl8192u: ieee80211: Use netdev_warn() for network devices.
  Staging: rtl8192u: ieee80211: Use netdev_dbg() for debug messages.
  staging: wlan-ng: fix use-after-free Read in hfa384x_usbin_callback
  staging: rtl8723bs: hal: Remove NULL check before kfree
  staging: rtl8723bs: hal: Correct typos in comments
  staging: rtl8723bs: os_dep: Correct typos in comments
  staging: rtl8723bs: core: Correct typos in comments
  staging: rtl8723bs: hal: Remove unnecessary cast on void pointer
  staging: rtl8188eu: cleanup long line in odm.c
  staging: rtl8723bs: hal: Compress return logic
  staging: rtl8723bs: rtw_cmd: Compress lines for immediate return
  staging: rtl8723bs: rtw_efuse: Compress lines for immediate return
  staging: wilc1000: remove label from examples in DT binding documentation
  staging: rtl8723bs: Remove blank line before '}' brace
  Staging: rtl8188eu: hal: Add space around operators
  ...
 2020-03-30 14:20:41 -07:00
Linus Torvalds
db34c5ffee USB / PHY patches for 5.7-rc1 
Here are the big set of USB and PHY driver patches for 5.7-rc1.
 
 Nothing huge here, some new PHY drivers, loads of USB gadget fixes and
 updates, xhci updates, usb-serial driver updates and new device ids, and
 other minor things.  Full details in the shortlog.
 
 All have been in linux-next for a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXoHL9w8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymz6wCcDwDTZouXj+0B37q+kwlCQQPyLukAn2CxKfrM
 d+wScRHWoZutA8IdzqaU
 =5+jn
 -----END PGP SIGNATURE-----

Merge tag 'usb-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / PHY updates from Greg KH:
 "Here are the big set of USB and PHY driver patches for 5.7-rc1.

  Nothing huge here, some new PHY drivers, loads of USB gadget fixes and
  updates, xhci updates, usb-serial driver updates and new device ids,
  and other minor things. Full details in the shortlog.

  All have been in linux-next for a while with no reported issues"

* tag 'usb-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (239 commits)
  USB: cdc-acm: restore capability check order
  usb: cdns3: make signed 1 bit bitfields unsigned
  usb: gadget: fsl: remove unused variable 'driver_desc'
  usb: gadget: f_fs: Fix use after free issue as part of queue failure
  usb: typec: Correct the documentation for typec_cable_put()
  USB: serial: io_edgeport: fix slab-out-of-bounds read in edge_interrupt_callback
  USB: serial: option: add Wistron Neweb D19Q1
  USB: serial: option: add BroadMobi BM806U
  USB: serial: option: add support for ASKEY WWHC050
  usb: core: Add ACPI support for USB interface devices
  driver core: platform: Reimplement devm_platform_ioremap_resource
  usb: dwc2: convert to devm_platform_get_and_ioremap_resource
  usb: host: hisilicon: convert to devm_platform_get_and_ioremap_resource
  usb: host: xhci-plat: convert to devm_platform_get_and_ioremap_resource
  drivers: provide devm_platform_get_and_ioremap_resource()
  phy: qcom-qusb2: Add new overriding tuning parameters in QUSB2 V2 PHY
  phy: qcom-qusb2: Add support for overriding tuning parameters in QUSB2 V2 PHY
  dt-bindings: phy: qcom-qusb2: Add support for overriding Phy tuning parameters
  phy: qcom-qusb2: Add generic QUSB2 V2 PHY support
  dt-bindings: phy: qcom,qusb2: Add compatibles for QUSB2 V2 phy and SC7180
  ...
 2020-03-30 13:54:11 -07:00
Alexander Shishkin
8622dfefb6 intel_th: msu: Make stopping the trace optional 
Some use cases prefer to keep collecting the trace data into the last
available window while the other windows are being offloaded instead of
stopping the trace. In this scenario, the window switch happens
automatically when the next window becomes available again.

Add an option to allow this and a sysfs attribute to enable it.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200319085152.52183-1-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2020-03-24 13:45:24 +01:00
Christian Gromm
4a1a3e9bf5 staging: most: Documentation: move ABI description files out of staging area 
This patch moves the ABI description fils sysfs-bus-most and
configfs-most to the kernel's documentation folder.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Link: https://lore.kernel.org/r/1583845362-26707-4-git-send-email-christian.gromm@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2020-03-24 13:42:44 +01:00
Moti Haimovski
5cce51464c habanalabs: add debugfs write64/read64 
Allow debug user to write/read 64-bit data through debugfs.
This will expedite the dump process of the (large) internal
memories of the device done during debug.

Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
 2020-03-24 10:54:16 +02:00
Mike Leach
05bd70c098 docs: sysfs: coresight: Add sysfs ABI documentation for CTI 
Add API usage document for sysfs API in CTI driver.

Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200320165303.13681-12-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2020-03-21 11:32:21 +01:00
Daniel Campello
72ad02b15d iio: Add SEMTECH SX9310/9311 sensor driver 
Add SEMTECH SX9310/9311 driver.

The device has the following entry points:

Usual frequency:
- sampling_frequency
- sampling_frequency_available

Instant reading of current values for different sensors:
- in_proximity0_raw
- in_proximity1_raw
- in_proximity2_raw
- in_proximity3_comb_raw
and associated events in events/

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enrico Granata <egranata@chromium.org>
Signed-off-by: Daniel Campello <campello@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2020-03-21 10:28:20 +00:00
Jaegeuk Kim
a7e679b533 f2fs: show mounted time 
Let's show mounted time.

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
 2020-03-19 11:41:25 -07:00
PrasannaKumar Muralidharan
49d37c6b09 Documentation: ABI: nvmem: add documentation for JZ4780 efuse ABI 
This patch brings support for the JZ4780 efuse. Currently it only exposes
a read only access to the entire 8K bits efuse memory.

Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200310132257.23358-14-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2020-03-19 07:41:03 +01:00
Andy Shevchenko
a3cb39d258 serial: core: Allow detach and attach serial device for console 
In the future we would like to disable power management on the serial devices
used as kernel consoles to avoid weird behaviour in some cases. However,
disabling PM may prevent system to go to deep sleep states, which in its turn
leads to the higher power consumption.

Tony Lindgren proposed a work around, i.e. allow user to detach such consoles
to make PM working again. In case user wants to see what's going on, it also
provides a mechanism to attach console back.

Link: https://lists.openwall.net/linux-kernel/2018/09/29/65
Suggested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200217114016.49856-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2020-03-17 15:57:59 +01:00
William Breathitt Gray
954ab5cc5f counter: 104-quad-8: Support Differential Encoder Cable Status 
The ACCES 104-QUAD-8 series provides status information about the
connection state of the differential encoder cable inputs. This patch
implements support to expose such information from these devices.

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2020-03-08 17:28:53 +00:00
William Breathitt Gray
de65d05563 counter: 104-quad-8: Support Filter Clock Prescaler 
The ACCES 104-QUAD-8 series does active filtering on the quadrature
input signals via the PC/104 bus clock (OSC 14.318 MHz). This patch
exposes the filter clock prescaler available on each channel.

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2020-03-08 17:28:52 +00:00
Alexandru Tachici
7e4d75935d Documentation: ABI: testing: ad7192: update sysfs docs 
Updated mainline documentation on ad7192 userspace sysfs.

Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2020-03-08 17:28:33 +00:00
Badhri Jagan Sridharan
75f81a7ffe usb: typec: Add sysfs node to show cc orientation 
Export Type-C orientation information when available.
- "normal": CC1 orientation
- "reverse": CC2 orientation
- "unknown": Orientation cannot be determined.

Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200226195758.150477-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2020-03-04 10:51:21 +01:00
Kenneth Lee
015d239ac0 uacce: add uacce driver 
Uacce (Unified/User-space-access-intended Accelerator Framework) targets to
provide Shared Virtual Addressing (SVA) between accelerators and processes.
So accelerator can access any data structure of the main cpu.
This differs from the data sharing between cpu and io device, which share
only data content rather than address.
Since unified address, hardware and user space of process can share the
same virtual address in the communication.

Uacce create a chrdev for every registration, the queue is allocated to
the process when the chrdev is opened. Then the process can access the
hardware resource by interact with the queue file. By mmap the queue
file space to user space, the process can directly put requests to the
hardware without syscall to the kernel space.

The IOMMU core only tracks mm<->device bonds at the moment, because it
only needs to handle IOTLB invalidation and PASID table entries. However
uacce needs a finer granularity since multiple queues from the same
device can be bound to an mm. When the mm exits, all bound queues must
be stopped so that the IOMMU can safely clear the PASID table entry and
reallocate the PASID.

An intermediate struct uacce_mm links uacce devices and queues.
Note that an mm may be bound to multiple devices but an uacce_mm
structure only ever belongs to a single device, because we don't need
anything more complex (if multiple devices are bound to one mm, then
we'll create one uacce_mm for each bond).

        uacce_device --+-- uacce_mm --+-- uacce_queue
                       |              '-- uacce_queue
                       |
                       '-- uacce_mm --+-- uacce_queue
                                      +-- uacce_queue
                                      '-- uacce_queue

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Kenneth Lee <liguozhu@hisilicon.com>
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
 2020-02-22 09:25:42 +08:00
Sourabh Jain
d8e73458f3 powerpc/fadump: sysfs for fadump memory reservation 
Add a sys interface to allow querying the memory reserved by FADump for
saving the crash dump.

Also added Documentation/ABI for the new sysfs file.

Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191211160910.21656-7-sourabhjain@linux.ibm.com
 2020-02-19 22:46:07 +11:00
Sourabh Jain
3f5f1f22ef Documentation/ABI: Mark /sys/kernel/fadump_* sysfs files deprecated 
Add a deprecation note in FADump sysfs ABI documentation files and
move them from ABI/testing to ABI/obsolete directory.

Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
[mpe: Use a proper table to fix errors from the documentation build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191211160910.21656-6-sourabhjain@linux.ibm.com
 2020-02-19 22:45:36 +11:00
Sourabh Jain
8852c07a88 powerpc/powernv: Move core and fadump_release_opalcore under new kobject 
The /sys/firmware/opal/core and /sys/kernel/fadump_release_opalcore
sysfs files are used to export and release the OPAL memory on PowerNV
platform. let's organize them into a new kobject under
/sys/firmware/opal/mpipl/ directory.

A symlink is added to maintain the backward compatibility for
/sys/firmware/opal/core sysfs file.

Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191211160910.21656-5-sourabhjain@linux.ibm.com
 2020-02-19 21:07:10 +11:00
Sourabh Jain
d418b19f34 powerpc/fadump: Reorganize /sys/kernel/fadump_* sysfs files 
As the number of FADump sysfs files increases it is hard to manage all
of them inside /sys/kernel directory. It's better to have all the
FADump related sysfs files in a dedicated directory
/sys/kernel/fadump. But in order to maintain backward compatibility a
symlink has been added for every sysfs that has moved to new location.

As the FADump sysfs files are now part of a dedicated directory there
is no need to prefix their name with fadump_, hence sysfs file names
are also updated. For example fadump_enabled sysfs file is now
referred as enabled.

Also consolidate ABI documentation for all the FADump sysfs files in a
single file Documentation/ABI/testing/sysfs-kernel-fadump.

Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Tested-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191211160910.21656-4-sourabhjain@linux.ibm.com
 2020-02-19 21:07:09 +11:00
Sourabh Jain
f52153ab38 Documentation/ABI: Add ABI documentation for /sys/kernel/fadump_* 
Add missing ABI documentation for existing FADump sysfs files.

Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191211160910.21656-2-sourabhjain@linux.ibm.com
 2020-02-19 21:07:09 +11:00
Wang Long
3b82a112ce Documentation/ABI: move sysfs-kernel-uids to removed directory 
commit 7c9414385e ("sched: Remove USER_SCHED") deleted the
USER_SCHED feature. so move the ABI doc to removed directory.

Signed-off-by: Wang Long <w@laoqinren.net>
Link: https://lore.kernel.org/r/1581082930-30441-1-git-send-email-w@laoqinren.net
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
 2020-02-13 11:39:36 -07:00
Heikki Krogerus
ae4ba35d36 usb: typec: Allow power role swapping even without USB PD 
Even though originally the USB Type-C Specification did not
describe the steps for power role swapping without USB PD
contract in place, it did not actually mean power role swap
without USB PD was not allowed. The USB Type-C Specification
did not clearly separate the data and power roles until in
the release 1.2 which is why there also were no clear steps
for the scenario where only the power role was swapped
without USB PD contract before that.

Since in the latest version of the specification the power
role swap without USB PD is now clearly mentioned as allowed
operation, removing the check that prevented power role swap
without USB PD support.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200211112531.86510-4-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2020-02-12 10:51:21 -08:00
Stephen Smalley
e9c38f9fc2 Documentation,selinux: deprecate setting checkreqprot to 1 
Deprecate setting the SELinux checkreqprot tunable to 1 via kernel
parameter or /sys/fs/selinux/checkreqprot.  Setting it to 0 is left
intact for compatibility since Android and some Linux distributions
do so for security and treat an inability to set it as a fatal error.
Eventually setting it to 0 will become a no-op and the kernel will
stop using checkreqprot's value internally altogether.

checkreqprot was originally introduced as a compatibility mechanism
for legacy userspace and the READ_IMPLIES_EXEC personality flag.
However, if set to 1, it weakens security by allowing mappings to be
made executable without authorization by policy.  The default value
for the SECURITY_SELINUX_CHECKREQPROT_VALUE config option was changed
from 1 to 0 in commit 2a35d196c1 ("selinux: change
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE default") and both Android
and Linux distributions began explicitly setting
/sys/fs/selinux/checkreqprot to 0 some time ago.

Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
 2020-02-10 10:49:01 -05:00
Linus Torvalds
d271ab2923 xen: branch for v5.6-rc1 
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCXjrKegAKCRCAXGG7T9hj
 vkAzAQDtV8yxItCMTC/0vxMZnBUk7t+KFuSg7UIoWkwHPvd2CQEAjlhWeX0u3z9D
 uxwmxdjri1nlrTJBulbvCkJuTfZDYwo=
 =8Q8T
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-5.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull xen updates from Juergen Gross:

 - fix a bug introduced in 5.5 in the Xen gntdev driver

 - fix the Xen balloon driver when running on ancient Xen versions

 - allow Xen stubdoms to control interrupt enable flags of
   passed-through PCI cards

 - release resources in Xen backends under memory pressure

* tag 'for-linus-5.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/blkback: Consistently insert one empty line between functions
  xen/blkback: Remove unnecessary static variable name prefixes
  xen/blkback: Squeeze page pools if a memory pressure is detected
  xenbus/backend: Protect xenbus callback with lock
  xenbus/backend: Add memory pressure handler callback
  xen/gntdev: Do not use mm notifiers with autotranslating guests
  xen/balloon: Support xend-based toolstack take two
  xen-pciback: optionally allow interrupt enable flag writes
 2020-02-05 17:44:14 +00:00
Linus Torvalds
eadc4e40e6 RTC for 5.6 
Subsystem:
  - the VL_READ and VL_CLR ioctls are now documented and their behavior is
    unified across all the drivers.
  - RTC_I2C_AND_SPI Kconfig option rework to avoid selecting both REGMAP_I2C and
    REGMAP_SPI unecessarily.
 
 Drivers:
  - at91rm9200: remove deprecated procfs, add sam9x60, sama5d4 and sama5d2
    compatibles.
  - cmos: solve lost interrupts issue on MS Surface 3
  - hym8563: return proper errno when time is invalid
  - rv3029: many fixes, nvram support
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEycoQi/giopmpPgB12wIijOdRNOUFAl44lxsACgkQ2wIijOdR
 NOVF3BAAlQVFDklLqkS6MJplgZ06lgv4ZIbfxCHYFJPUNt/X/gTcHS1OSTwctmor
 3qQamySGc74/GAI6lmNSSzDUz9vi2hwcwvLtR/e6+Kgdhg9EuWWvgsqKYRGAn573
 TzHWsYY8bDpZ/mN5K+qqadGlzsP58gsEaw0fzcsPkZQQdq4mNSIrB5RILvsHX8cN
 +RviYOqR+ZvAegfQrAfb/9SCwxQAstUqRDaZXodQDEeIk5CEDWyr31+U9eLDdYoN
 1FOHYp6uwUy6Vnl0ym7WU42L95tVWx9XOc/PEq8dZ1m09nfrMhqeIoQC8SUtxG9+
 FWXN87lkLSlDaLUwVE8T22QII6jP+7Lc2t6SbI4fwwJdNDoPg+5hhabGjQbM2We9
 nG1x7TsVwKjeUglfhqeVgGWYzmIhAeOEBXQhqCdtfVi13ocecVFJxOG6oolQGtlZ
 M+/t91hID6il7/nxGembcHKapMf9c41CXBPesEg0QjkvGvKj1Z8L9a5vYigzbxWW
 zb8m9cjIhY3bb8mns3aCs773PSXavsycLk1Hupw6RWrN1XnEXVMHQZDtvzCJe7EV
 8CY40LI0VN6x5HC/d0EnqyrMvQbkgTBPXjLBhj54edCZM3vAny3xkYc03oDU8cKc
 0PbLUXKpFmzFbTQB4w0sE2FgT0uZmL2SCXiFemUwxbl+/ZACkoc=
 =e1Xr
 -----END PGP SIGNATURE-----

Merge tag 'rtc-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "The VL_READ and VL_CLR ioctls have been reworked to be more useful.
  This will not break userspace as there are very few users and they are
  using the integer value as a boolean.

  Apart from that, two drivers were reworked and a few fixes here and
  there for a net reduction of number of lines.

  Summary:

  Subsystem:
   - the VL_READ and VL_CLR ioctls are now documented and their behavior
     is unified across all the drivers.
   - RTC_I2C_AND_SPI Kconfig option rework to avoid selecting both
     REGMAP_I2C and REGMAP_SPI unecessarily.

  Drivers:
   - at91rm9200: remove deprecated procfs, add sam9x60, sama5d4 and
     sama5d2 compatibles.
   - cmos: solve lost interrupts issue on MS Surface 3
   - hym8563: return proper errno when time is invalid
   - rv3029: many fixes, nvram support"

* tag 'rtc-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (63 commits)
  dt-bindings: rtc: at91rm9200: document clocks property
  rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed
  rtc: Kconfig: select REGMAP_I2C when necessary
  rtc: Kconfig: properly indent sd3078 entry
  rtc: cmos: Refactor code by using the new dmi_get_bios_year() helper
  rtc: cmos: Use predefined value for RTC IRQ on legacy x86
  rtc: cmos: Stop using shared IRQ
  rtc: tps6586x: Use IRQ_NOAUTOEN flag
  rtc: at91rm9200: use FIELD_PREP/FIELD_GET
  rtc: at91rm9200: avoid time readout in at91_rtc_setalarm
  rtc: at91rm9200: move register definitions to C file
  rtc: at91rm9200: add sama5d4 and sama5d2 compatibles
  dt-bindings: rtc: at91rm9200: convert bindings to json-schema
  rtc: at91rm9200: remove procfs information
  dt-bindings: atmel, at91rm9200-rtc: add microchip, sam9x60-rtc
  rtc: pcf8563: Use BIT
  rtc: moxart: Convert to SPDX identifier
  rtc: ds1343: Remove unused struct spi_device in struct ds1343_priv
  rtc: rx8025: Remove struct i2c_client from struct rx8025_data
  rtc: hym8563: Read the valid flag directly instead of caching it
  ...
 2020-02-04 07:03:40 +00:00
Linus Torvalds
6e135baed8 f2fs-for-5.6 
In this series, we've implemented transparent compression experimentally. It
 supports LZO and LZ4, but will add more later as we investigate in the field
 more. At this point, the feature doesn't expose compressed space to user
 directly in order to guarantee potential data updates later to the space.
 Instead, the main goal is to reduce data writes to flash disk as much as
 possible, resulting in extending disk life time as well as relaxing IO
 congestion. Alternatively, we're also considering to add ioctl() to reclaim
 compressed space and show it to user after putting the immutable bit.
 
 Enhancement:
  - add compression support
  - avoid unnecessary locks in quota ops
  - harden power-cut scenario for zoned block devices
  - use private bio_set to avoid IO congestion
  - replace GC mutex with rwsem to serialize callers
 
 Bug fix:
  - fix dentry consistency and memory corruption in rename()'s error case
  - fix wrong swap extent reports
  - fix casefolding bugs
  - change lock coverage to avoid deadlock
  - avoid GFP_KERNEL under f2fs_lock_op
 
 And, we've cleaned up sysfs entries to prepare no debugfs.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE00UqedjCtOrGVvQiQBSofoJIUNIFAl4zInwACgkQQBSofoJI
 UNL4Tg/+JBbVEFa3IUBGMdbjfgd/g0Jye++iMAYYGRWT6Ll/IGcHRV9NunITjgWU
 mBZqdhI28kXeiGCcewB1ZvivjLx22X4n6yevHk2B5A6PNe9IDCHi0HOAhJJHkjPH
 ecv2L+vX3Oj4y0+H7JNz9Fo3OIPJvMPtCQWlg1z+VQyhB85zNP7fZlvvIY4tG8yw
 ERo0YNotLqwcF1BxCwNbAhV3aJGDxar+MI//yNzpiwDX7IptVpqestfcoIYc9kKL
 4kSWRyEIGwcuIeyoM6aofGS9t4Z/Oe/gdqcxNr6l5n0Q/tMTpb4b/fJFGNr6RRx9
 X9NQo8flkQb2DEIOP0DVpO2aPebzsVtzg3LZUOLA83+wCHfwINtHai2Dy2zDJ2my
 BrVdou8fe2oxoaYihJg/Tz9cd0nA/6mZArtpYvDImAmX/xuGOvVk9zZkXNwc9nVX
 EyVzy0vW4lA6gAIJ95aG6DDhJcAtVoy0MhBRWG92Pufxhn9aW24AV63ChWUf9DRx
 /3RqpMAuQ3UC2gOxXKKnr54lsdhUIMn/y9sjROkVvQ1BvgRVxO8I4GFvMHMKv9pR
 9KXiVRdzyYERyoL4+MF7A2zTnw+RHL4RVILa85p2ALGy2jQ1UuNUQi0BN9x2u1v8
 S1ifNNX8SwOP+83ImFJhhn3HybpFQ45aLO3F7ZjKBQAnufJu+xw=
 =zeoY
 -----END PGP SIGNATURE-----

Merge tag 'f2fs-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs

Pull f2fs updates from Jaegeuk Kim:
 "In this series, we've implemented transparent compression
  experimentally. It supports LZO and LZ4, but will add more later as we
  investigate in the field more.

  At this point, the feature doesn't expose compressed space to user
  directly in order to guarantee potential data updates later to the
  space. Instead, the main goal is to reduce data writes to flash disk
  as much as possible, resulting in extending disk life time as well as
  relaxing IO congestion.

  Alternatively, we're also considering to add ioctl() to reclaim
  compressed space and show it to user after putting the immutable bit.

  Enhancements:
   - add compression support
   - avoid unnecessary locks in quota ops
   - harden power-cut scenario for zoned block devices
   - use private bio_set to avoid IO congestion
   - replace GC mutex with rwsem to serialize callers

  Bug fixes:
   - fix dentry consistency and memory corruption in rename()'s error case
   - fix wrong swap extent reports
   - fix casefolding bugs
   - change lock coverage to avoid deadlock
   - avoid GFP_KERNEL under f2fs_lock_op

  And, we've cleaned up sysfs entries to prepare no debugfs"

* tag 'f2fs-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (31 commits)
  f2fs: fix race conditions in ->d_compare() and ->d_hash()
  f2fs: fix dcache lookup of !casefolded directories
  f2fs: Add f2fs stats to sysfs
  f2fs: delete duplicate information on sysfs nodes
  f2fs: change to use rwsem for gc_mutex
  f2fs: update f2fs document regarding to fsync_mode
  f2fs: add a way to turn off ipu bio cache
  f2fs: code cleanup for f2fs_statfs_project()
  f2fs: fix miscounted block limit in f2fs_statfs_project()
  f2fs: show the CP_PAUSE reason in checkpoint traces
  f2fs: fix deadlock allocating bio_post_read_ctx from mempool
  f2fs: remove unneeded check for error allocating bio_post_read_ctx
  f2fs: convert inline_dir early before starting rename
  f2fs: fix memleak of kobject
  f2fs: fix to add swap extent correctly
  f2fs: run fsck when getting bad inode during GC
  f2fs: support data compression
  f2fs: free sysfs kobject
  f2fs: declare nested quota_sem and remove unnecessary sems
  f2fs: don't put new_page twice in f2fs_rename
  ...
 2020-01-30 15:39:24 -08:00
Linus Torvalds
4cadc60d6b power supply and reset changes for the v5.6 series 
Core:
  * Add battery internal resistance temperature table support
 
 Drivers:
  * sc27xx: Optimize the battery resistance with measuring temperature
  * max17042-battery: Add MAX17055 support
  * bq25890-charger: Add support of BQ25892 and BQ25896 chips
  * misc. fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAl4yC0MACgkQ2O7X88g7
 +prb1Q/+P+tWsL7n4vDfFlvYjefH73SBHaG5rQzIJGJrRqs8/cfwR9eufc/sFwsz
 8msvYstHhwQDFS6JbI67r2gOWM/RPdgz+xXfSXYSr1z9UNO6opaCB1U/hDxTOElF
 7STas/2qBekM5I3wq7AlSbR20pbQti10GTgioyeTp+PoP6ubXPPMPXoqfAxI7zXJ
 7R1FSxRVKqR8XXr6y/+hhD78+koke8dWU43ZPZDjaWGUyIhfF6dK4vemX7C1eJ3b
 OlgeZYkxC/Jmmp7eldMJrbD3NhQEqz+SrEGIXkEIJZtoYp/fwS+JsSXypVU8Ex0h
 s2JoTtaYQFKqfyZixldOaVFBGBQNuw98xSshFDzo9CC+adNK2C6hgkg4mva2O5cR
 VMvlPW5nPbCMrEcE2glZ0XN9bG/jsdUlFTNEKHRBF5Lat6nfSFaZRKwv/Pjl7Bu0
 MpFJz6ml3z2mSjmjl3TQkFugtILu8+gRogW45uLasAsv7s6ZyM/6l/GvIdx/bGdt
 NdLHe4ZFxa00g3ltvaX+3OdGhHtVJqUbuyitrN9sqZfSNYyy+kuEP0nrO+363l4X
 3G1DyD827zCals+SOrdNwF3mQXqFBeE94pwDjN9ECoFuQd6UxApJ5GXnlUrYAMfw
 qOqXIzkcPuAiXIxXGPIIG4QH0axD6T+H1r181UviWY1ldgQCVoc=
 =tr2N
 -----END PGP SIGNATURE-----

Merge tag 'for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:
 "Core:
   - Add battery internal resistance temperature table support

  Drivers:
   - sc27xx: Optimize the battery resistance with measuring temperature
   - max17042-battery: Add MAX17055 support
   - bq25890-charger: Add support of BQ25892 and BQ25896 chips
   - misc fixes"

* tag 'for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (44 commits)
  power: supply: ipaq_micro_battery: remove unneeded semicolon
  power: supply: bq25890_charger: fix incorrect error return when bq25890_field_read fails
  power: supply: axp20x_usb_power: Only poll while offline
  power: supply: axp20x_usb_power: Add wakeup control
  power: supply: axp20x_usb_power: Allow offlining
  power: supply: axp20x_usb_power: Use a match structure
  power: suppy: ucs1002: Make the symbol 'ucs1002_regulator_enable' static
  power: reset: at91-poweroff: use proper master clock register offset
  power: reset: at91-poweroff: introduce struct shdwc_reg_config
  power: supply: bq25890_charger: Add DT and I2C ids for all supported chips
  dt-bindings: Add new chips to bq25890 binding documentation
  power: supply: bq25890_charger: Add support of BQ25892 and BQ25896 chips
  power: supply: core: Update sysfs-class-power ABI document
  power: supply: sbs-battery: Fix a signedness bug in sbs_get_battery_capacity()
  power: supply: ltc2941-battery-gauge: fix use-after-free
  power: supply: max17040: Correct IRQ wake handling
  power: supply: axp20x_usb_power: Remove unused device_node
  power: supply: axp20x_ac_power: Add wakeup control
  power: supply: axp20x_ac_power: Allow offlining
  power: supply: axp20x_ac_power: Fix reporting online status
  ...
 2020-01-30 07:51:24 -08:00
Linus Torvalds
7ba31c3f2f Staging/IIO patches for 5.6-rc1 
Here is the big staging/iio driver patches for 5.6-rc1
 
 Included in here are:
 	- lots of new IIO drivers and updates for that subsystem
 	- the usual huge quantity of minor cleanups for staging drivers
 	- removal of the following staging drivers:
 		- isdn/avm
 		- isdn/gigaset
 		- isdn/hysdn
 		- octeon-usb
 		- octeon ethernet
 
 Overall we deleted far more lines than we added, removing over 40k of
 old and obsolete driver code.
 
 All of these changes have been in linux-next for a while with no
 reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXjFOKw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yly3wCfac6fbfrpwZ2VeUFyT5EJFr9JnKEAn1VMQTIJ
 QCgCqbQemnXfbOXiA5pZ
 =rP6a
 -----END PGP SIGNATURE-----

Merge tag 'staging-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO updates from Greg KH:
 "Here is the big staging/iio driver patches for 5.6-rc1

  Included in here are:

   - lots of new IIO drivers and updates for that subsystem

   - the usual huge quantity of minor cleanups for staging drivers

   - removal of the following staging drivers:
       - isdn/avm
       - isdn/gigaset
       - isdn/hysdn
       - octeon-usb
       - octeon ethernet

  Overall we deleted far more lines than we added, removing over 40k of
  old and obsolete driver code.

  All of these changes have been in linux-next for a while with no
  reported issues"

* tag 'staging-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (353 commits)
  staging: most: usb: check for NULL device
  staging: next: configfs: fix release link
  staging: most: core: fix logging messages
  staging: most: core: remove container struct
  staging: most: remove struct device core driver
  staging: most: core: drop device reference
  staging: most: remove device from interface structure
  staging: comedi: drivers: fix spelling mistake "to" -> "too"
  staging: exfat: remove fs_func struct.
  staging: wilc1000: avoid mutex unlock without lock in wilc_wlan_handle_txq()
  staging: wilc1000: return zero on success and non-zero on function failure
  staging: axis-fifo: replace spinlock with mutex
  staging: wilc1000: remove unused code prior to throughput enhancement in SPI
  staging: wilc1000: added 'wilc_' prefix for 'struct assoc_resp' name
  staging: wilc1000: move firmware API struct's to separate header file
  staging: wilc1000: remove use of infinite loop conditions
  staging: kpc2000: rename variables with kpc namespace
  staging: vt6656: Remove memory buffer from vnt_download_firmware.
  staging: vt6656: Just check NEWRSR_DECRYPTOK for RX_FLAG_DECRYPTED.
  staging: vt6656: Use vnt_rx_tail struct for tail variables.
  ...
 2020-01-29 10:15:11 -08:00
Linus Torvalds
aac9662671 USB/Thunderbolt/PHY driver updates for 5.6-rc1 
Here is the big USB and Thunderbolt and PHY driver updates for 5.6-rc1.
 
 With the advent of USB4, "Thunderbolt" has really become USB4, so the
 renaming of the Kconfig option and starting to share subsystem code has
 begun, hence both subsystems coming in through the same tree here.
 
 PHY driver updates also touched USB drivers, so that is coming in
 through here as well.
 
 Major stuff included in here are:
 	- USB 4 initial support added (i.e. Thunderbolt)
 	- musb driver updates
 	- USB gadget driver updates
 	- PHY driver updates
 	- USB PHY driver updates
 	- lots of USB serial stuff fixed up
 	- USB typec updates
 	- USB-IP fixes
 	- lots of other smaller USB driver updates
 
 All of these have been in linux-next for a while now (the usb-serial
 tree is already tested in linux-next on its own before merged into
 here), with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXjFTNw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynpKQCgrh2FoobS2x0oFg/OUHdjokQV/BYAoJGWLOmt
 8S5cnsCuLq3w5qpCcBva
 =PMGd
 -----END PGP SIGNATURE-----

Merge tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/Thunderbolt/PHY driver updates from Greg KH:
 "Here is the big USB and Thunderbolt and PHY driver updates for
  5.6-rc1.

  With the advent of USB4, "Thunderbolt" has really become USB4, so the
  renaming of the Kconfig option and starting to share subsystem code
  has begun, hence both subsystems coming in through the same tree here.

  PHY driver updates also touched USB drivers, so that is coming in
  through here as well.

  Major stuff included in here are:
   - USB 4 initial support added (i.e. Thunderbolt)
   - musb driver updates
   - USB gadget driver updates
   - PHY driver updates
   - USB PHY driver updates
   - lots of USB serial stuff fixed up
   - USB typec updates
   - USB-IP fixes
   - lots of other smaller USB driver updates

  All of these have been in linux-next for a while now (the usb-serial
  tree is already tested in linux-next on its own before merged into
  here), with no reported issues"

[ Removed an incorrect compile test enablement for PHY_EXYNOS5250_SATA
  that causes configuration warnings    - Linus ]

* tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits)
  Doc: ABI: add usb charger uevent
  usb: phy: show USB charger type for user
  usb: cdns3: fix spelling mistake and rework grammar in text
  usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors
  USB: serial: cyberjack: fix spelling mistake "To" -> "Too"
  USB: serial: ir-usb: simplify endpoint check
  USB: serial: ir-usb: make set_termios synchronous
  USB: serial: ir-usb: fix IrLAP framing
  USB: serial: ir-usb: fix link-speed handling
  USB: serial: ir-usb: add missing endpoint sanity check
  usb: typec: fusb302: fix "op-sink-microwatt" default that was in mW
  usb: typec: wcove: fix "op-sink-microwatt" default that was in mW
  usb: dwc3: pci: add ID for the Intel Comet Lake -V variant
  usb: typec: tcpci: mask event interrupts when remove driver
  usb: host: xhci-tegra: set MODULE_FIRMWARE for tegra186
  usb: chipidea: add inline for ci_hdrc_host_driver_init if host is not defined
  usb: chipidea: handle single role for usb role class
  usb: musb: fix spelling mistake: "periperal" -> "peripheral"
  phy: ti: j721e-wiz: Fix build error without CONFIG_OF_ADDRESS
  USB: usbfs: Always unlink URBs in reverse order
  ...
 2020-01-29 10:09:44 -08:00
SeongJae Park
cb9369bdbb xen/blkback: Squeeze page pools if a memory pressure is detected 
Each `blkif` has a free pages pool for the grant mapping.  The size of
the pool starts from zero and is increased on demand while processing
the I/O requests.  If current I/O requests handling is finished or 100
milliseconds has passed since last I/O requests handling, it checks and
shrinks the pool to not exceed the size limit, `max_buffer_pages`.

Therefore, host administrators can cause memory pressure in blkback by
attaching a large number of block devices and inducing I/O.  Such
problematic situations can be avoided by limiting the maximum number of
devices that can be attached, but finding the optimal limit is not so
easy.  Improper set of the limit can results in memory pressure or a
resource underutilization.  This commit avoids such problematic
situations by squeezing the pools (returns every free page in the pool
to the system) for a while (users can set this duration via a module
parameter) if memory pressure is detected.

Discussions
===========

The `blkback`'s original shrinking mechanism returns only pages in the
pool which are not currently be used by `blkback` to the system.  In
other words, the pages that are not mapped with granted pages.  Because
this commit is changing only the shrink limit but still uses the same
freeing mechanism it does not touch pages which are currently mapping
grants.

Once memory pressure is detected, this commit keeps the squeezing limit
for a user-specified time duration.  The duration should be neither too
long nor too short.  If it is too long, the squeezing incurring overhead
can reduce the I/O performance.  If it is too short, `blkback` will not
free enough pages to reduce the memory pressure.  This commit sets the
value as `10 milliseconds` by default because it is a short time in
terms of I/O while it is a long time in terms of memory operations.
Also, as the original shrinking mechanism works for at least every 100
milliseconds, this could be a somewhat reasonable choice.  I also tested
other durations (refer to the below section for more details) and
confirmed that 10 milliseconds is the one that works best with the test.
That said, the proper duration depends on actual configurations and
workloads.  That's why this commit allows users to set the duration as a
module parameter.

Memory Pressure Test
====================

To show how this commit fixes the memory pressure situation well, I
configured a test environment on a xen-running virtualization system.
On the `blkfront` running guest instances, I attach a large number of
network-backed volume devices and induce I/O to those.  Meanwhile, I
measure the number of pages that swapped in (pswpin) and out (pswpout)
on the `blkback` running guest.  The test ran twice, once for the
`blkback` before this commit and once for that after this commit.  As
shown below, this commit has dramatically reduced the memory pressure:

                pswpin  pswpout
    before      76,672  185,799
    after          867    3,967

Optimal Aggressive Shrinking Duration
-------------------------------------

To find a best squeezing duration, I repeated the test with three
different durations (1ms, 10ms, and 100ms).  The results are as below:

    duration    pswpin  pswpout
    1           707     5,095
    10          867     3,967
    100         362     3,348

As expected, the memory pressure decreases as the duration increases,
but the reduction become slow from the `10ms`.  Based on this results, I
chose the default duration as 10ms.

Performance Overhead Test
=========================

This commit could incur I/O performance degradation under severe memory
pressure because the squeezing will require more page allocations per
I/O.  To show the overhead, I artificially made a worst-case squeezing
situation and measured the I/O performance of a `blkfront` running
guest.

For the artificial squeezing, I set the `blkback.max_buffer_pages` using
the `/sys/module/xen_blkback/parameters/max_buffer_pages` file.  In this
test, I set the value to `1024` and `0`.  The `1024` is the default
value.  Setting the value as `0` is same to a situation doing the
squeezing always (worst-case).

If the underlying block device is slow enough, the squeezing overhead
could be hidden.  For the reason, I use a fast block device, namely the
rbd[1]:

    # xl block-attach guest phy:/dev/ram0 xvdb w

For the I/O performance measurement, I run a simple `dd` command 5 times
directly to the device as below and collect the 'MB/s' results.

    $ for i in {1..5}; do dd if=/dev/zero of=/dev/xvdb \
                             bs=4k count=$((256*512)); sync; done

The results are as below.  'max_pgs' represents the value of the
`blkback.max_buffer_pages` parameter.

    max_pgs   Min       Max       Median     Avg    Stddev
    0         417       423       420        419.4  2.5099801
    1024      414       425       416        417.8  4.4384682
    No difference proven at 95.0% confidence

In short, even worst case squeezing on ramdisk based fast block device
makes no visible performance degradation.  Please note that this is just
a very simple and minimal test.  On systems using super-fast block
devices and a special I/O workload, the results might be different.  If
you have any doubt, test on your machine with your workload to find the
optimal squeezing duration for you.

[1] https://www.kernel.org/doc/html/latest/admin-guide/blockdev/ramdisk.html

Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
 2020-01-29 07:35:49 -06:00
Linus Torvalds
73a0bff205 Merge branch 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity 
Pull IMA updates from Mimi Zohar:
 "Two new features - measuring certificates and querying IMA for a file
  hash - and three bug fixes:

   - Measuring certificates is like the rest of IMA, based on policy,
     but requires loading a custom policy. Certificates loaded onto a
     keyring, for example during early boot, before a custom policy has
     been loaded, are queued and only processed after loading the custom
     policy.

   - IMA calculates and caches files hashes. Other kernel subsystems,
     and possibly kernel modules, are interested in accessing these
     cached file hashes.

  The bug fixes prevent classifying a file short read (e.g. shutdown) as
  an invalid file signature, add a missing blank when displaying the
  securityfs policy rules containing LSM labels, and, lastly, fix the
  handling of the IMA policy information for unknown LSM labels"

* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  IMA: Defined delayed workqueue to free the queued keys
  IMA: Call workqueue functions to measure queued keys
  IMA: Define workqueue for early boot key measurements
  IMA: pre-allocate buffer to hold keyrings string
  ima: ima/lsm policy rule loading logic bug fixes
  ima: add the ability to query the cached hash of a given file
  ima: Add a space after printing LSM rules for readability
  IMA: fix measuring asymmetric keys Kconfig
  IMA: Read keyrings= option from the IMA policy
  IMA: Add support to limit measuring keys
  KEYS: Call the IMA hook to measure keys
  IMA: Define an IMA hook to measure keys
  IMA: Add KEY_CHECK func to measure keys
  IMA: Check IMA policy flag
  ima: avoid appraise error for hash calc interrupt
 2020-01-28 18:52:09 -08:00
Linus Torvalds
bd2463ac7d Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next 
Pull networking updates from David Miller:

 1) Add WireGuard

 2) Add HE and TWT support to ath11k driver, from John Crispin.

 3) Add ESP in TCP encapsulation support, from Sabrina Dubroca.

 4) Add variable window congestion control to TIPC, from Jon Maloy.

 5) Add BCM84881 PHY driver, from Russell King.

 6) Start adding netlink support for ethtool operations, from Michal
    Kubecek.

 7) Add XDP drop and TX action support to ena driver, from Sameeh
    Jubran.

 8) Add new ipv4 route notifications so that mlxsw driver does not have
    to handle identical routes itself. From Ido Schimmel.

 9) Add BPF dynamic program extensions, from Alexei Starovoitov.

10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes.

11) Add support for macsec HW offloading, from Antoine Tenart.

12) Add initial support for MPTCP protocol, from Christoph Paasch,
    Matthieu Baerts, Florian Westphal, Peter Krystad, and many others.

13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu
    Cherian, and others.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits)
  net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC
  udp: segment looped gso packets correctly
  netem: change mailing list
  qed: FW 8.42.2.0 debug features
  qed: rt init valid initialization changed
  qed: Debug feature: ilt and mdump
  qed: FW 8.42.2.0 Add fw overlay feature
  qed: FW 8.42.2.0 HSI changes
  qed: FW 8.42.2.0 iscsi/fcoe changes
  qed: Add abstraction for different hsi values per chip
  qed: FW 8.42.2.0 Additional ll2 type
  qed: Use dmae to write to widebus registers in fw_funcs
  qed: FW 8.42.2.0 Parser offsets modified
  qed: FW 8.42.2.0 Queue Manager changes
  qed: FW 8.42.2.0 Expose new registers and change windows
  qed: FW 8.42.2.0 Internal ram offsets modifications
  MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver
  Documentation: net: octeontx2: Add RVU HW and drivers overview
  octeontx2-pf: ethtool RSS config support
  octeontx2-pf: Add basic ethtool support
  ...
 2020-01-28 16:02:33 -08:00
Linus Torvalds
b1dba24731 selinux/stable-5.6 PR 20200127 
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAl4vRu8UHHBhdWxAcGF1
 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXPE1BAA0yg0npafRIrjIMU5IkpDh8TvywWF
 DDcarqBXNSIXJtl3EWr7LynvKKqBs4jN7R0ZRMYc5e/6LrSUBvds4GTPm7dOOW4C
 cIlAjXTlek2LvHf1/6aNE2SdlkNBYOYo//ifVH+zAn6VOQHGZXBd31oxwPLNW5mP
 vVS7OIGhWPcviUebxD7mNmgS/ODoZS/ZL434RK07FhMnN/jEdfuNnu87uz7WAK1p
 MWmqzB2tkwrj5uN5wRU6+9R82xYGbo6Xq5uEsFidMrlrn+cguuf+xPrrejT1qVnU
 8r72MKKRjfObMRj1fQt3VC0feFt2WyC0qAk3XwKljmllGXZIzV1IPmrui9pLD5Ti
 IhLgIEBtMpJgrYhFwl3yMe1EUwdQ/WAlbf8GnoIWyzm0oOo0kaN5BfrvlYtYYmN3
 i2xpDOcQ0J4I3tA7zXMpD5tWzDzePxxadZ367qtwRp/AhbL4bnqbvP7vaPtZczz2
 pTEGFYIbeqfLCwy2PWHZOVYj83bidmC0lQ3PTFsC26Upui750MdFa7toQV70Hiqo
 EdpOzxUHbn6pPuGy7Rey26ybOiZPkL1q1Czoa6jbNyutv8ts2eZNyuCL25QKKzvE
 42AvSzA0lt8taDbSbNu+FiexR619oEt15hSrHrRslunecumYfNjJyk85ZCloh+XL
 dnD1bPytgl1G4i8=
 =2jFm
 -----END PGP SIGNATURE-----

Merge tag 'selinux-pr-20200127' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux

Pull SELinux update from Paul Moore:
 "This is one of the bigger SELinux pull requests in recent years with
  28 patches. Everything is passing our test suite and the highlights
  are below:

   - Mark CONFIG_SECURITY_SELINUX_DISABLE as deprecated. We're some time
     away from actually attempting to remove this in the kernel, but the
     only distro we know that still uses it (Fedora) is working on
     moving away from this so we want to at least let people know we are
     planning to remove it.

   - Reorder the SELinux hooks to help prevent bad things when SELinux
     is disabled at runtime. The proper fix is to remove the
     CONFIG_SECURITY_SELINUX_DISABLE functionality (see above) and just
     take care of it at boot time (e.g. "selinux=0").

   - Add SELinux controls for the kernel lockdown functionality,
     introducing a new SELinux class/permissions: "lockdown { integrity
     confidentiality }".

   - Add a SELinux control for move_mount(2) that reuses the "file {
     mounton }" permission.

   - Improvements to the SELinux security label data store lookup
     functions to speed up translations between our internal label
     representations and the visible string labels (both directions).

   - Revisit a previous fix related to SELinux inode auditing and
     permission caching and do it correctly this time.

   - Fix the SELinux access decision cache to cleanup properly on error.
     In some extreme cases this could limit the cache size and result in
     a decrease in performance.

   - Enable SELinux per-file labeling for binderfs.

   - The SELinux initialized and disabled flags were wrapped with
     accessors to ensure they are accessed correctly.

   - Mark several key SELinux structures with __randomize_layout.

   - Changes to the LSM build configuration to only build
     security/lsm_audit.c when needed.

   - Changes to the SELinux build configuration to only build the IB
     object cache when CONFIG_SECURITY_INFINIBAND is enabled.

   - Move a number of single-caller functions into their callers.

   - Documentation fixes (/selinux -> /sys/fs/selinux).

   - A handful of cleanup patches that aren't worth mentioning on their
     own, the individual descriptions have plenty of detail"

* tag 'selinux-pr-20200127' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: (28 commits)
  selinux: fix regression introduced by move_mount(2) syscall
  selinux: do not allocate ancillary buffer on first load
  selinux: remove redundant allocation and helper functions
  selinux: remove redundant selinux_nlmsg_perm
  selinux: fix wrong buffer types in policydb.c
  selinux: reorder hooks to make runtime disable less broken
  selinux: treat atomic flags more carefully
  selinux: make default_noexec read-only after init
  selinux: move ibpkeys code under CONFIG_SECURITY_INFINIBAND.
  selinux: remove redundant msg_msg_alloc_security
  Documentation,selinux: fix references to old selinuxfs mount point
  selinux: deprecate disabling SELinux and runtime
  selinux: allow per-file labelling for binderfs
  selinuxfs: use scnprintf to get real length for inode
  selinux: remove set but not used variable 'sidtab'
  selinux: ensure the policy has been loaded before reading the sidtab stats
  selinux: ensure we cleanup the internal AVC counters on error in avc_update()
  selinux: randomize layout of key structures
  selinux: clean up selinux_enabled/disabled/enforcing_boot
  selinux: remove unnecessary selinux cred request
  ...
 2020-01-27 15:38:15 -08:00
Linus Torvalds
6d277aca48 Power management updates for 5.6-rc1 
- Update the ACPI processor driver in order to export
    acpi_processor_evaluate_cst() to the code outside of it, add
    ACPI support to the intel_idle driver based on that and clean
    up that driver somewhat (Rafael Wysocki).
 
  - Add an admin guide document for the intel_idle driver (Rafael
    Wysocki).
 
  - Clean up cpuidle core and drivers, enable compilation testing
    for some of them (Benjamin Gaignard, Krzysztof Kozlowski, Rafael
    Wysocki, Yangtao Li).
 
  - Fix reference counting of OPP (operating performance points) table
    structures (Viresh Kumar).
 
  - Add support for CPR (Core Power Reduction) to the AVS (Adaptive
    Voltage Scaling) subsystem (Niklas Cassel, Colin Ian King,
    YueHaibing).
 
  - Add support for TigerLake Mobile and JasperLake to the Intel RAPL
    power capping driver (Zhang Rui).
 
  - Update cpufreq drivers:
 
    * Add i.MX8MP support to imx-cpufreq-dt (Anson Huang).
 
    * Fix usage of a macro in loongson2_cpufreq (Alexandre Oliva).
 
    * Fix cpufreq policy reference counting issues in s3c and
      brcmstb-avs (chenqiwu).
 
    * Fix ACPI table reference counting issue and HiSilicon quirk
      handling in the CPPC driver (Hanjun Guo).
 
    * Clean up spelling mistake in intel_pstate (Harry Pan).
 
    * Convert the kirkwood and tegra186 drivers to using
      devm_platform_ioremap_resource() (Yangtao Li).
 
  - Update devfreq core:
 
    * Add 'name' sysfs attribute for devfreq devices (Chanwoo Choi).
 
    * Clean up the handing of transition statistics and allow them
      to be reset by writing 0 to the 'trans_stat' devfreq device
      attribute in sysfs (Kamil Konieczny).
 
    * Add 'devfreq_summary' to debugfs (Chanwoo Choi).
 
    * Clean up kerneldoc comments and Kconfig indentation (Krzysztof
      Kozlowski, Randy Dunlap).
 
  - Update devfreq drivers:
 
    * Add dynamic scaling for the imx8m DDR controller and clean up
      imx8m-ddrc (Leonard Crestez, YueHaibing).
 
    * Fix DT node reference counting and nitialization error code path
      in rk3399_dmc and add COMPILE_TEST and HAVE_ARM_SMCCC dependency
      for it (Chanwoo Choi, Yangtao Li).
 
    * Fix DT node reference counting in rockchip-dfi and make it use
      devm_platform_ioremap_resource() (Yangtao Li).
 
    * Fix excessive stack usage in exynos-ppmu (Arnd Bergmann).
 
    * Fix initialization error code paths in exynos-bus (Yangtao Li).
 
    * Clean up exynos-bus and exynos somewhat (Artur Świgoń, Krzysztof
      Kozlowski).
 
  - Add tracepoints for tracking usage_count updates unrelated to
    status changes in PM-runtime (Michał Mirosław).
 
  - Add sysfs attribute to control the "sync on suspend" behavior
    during system-wide suspend (Jonas Meurer).
 
  - Switch system-wide suspend tests over to 64-bit time (Alexandre
    Belloni).
 
  - Make wakeup sources statistics in debugfs cover deleted ones which
    used to be the case some time ago (zhuguangqing).
 
  - Clean up computations carried out during hibernation, update
    messages related to hibernation and fix a spelling mistake in one
    of them (Wen Yang, Luigi Semenzato, Colin Ian King).
 
  - Add mailmap entry for maintainer e-mail address that has not been
    functional for several years (Rafael Wysocki).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl4u2fESHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxvlkP/j5vDzyNUNJjnD6+897c8W+z5dwdiQfU
 QNtoopFXgw/fpOhGXRdj2mA4e6RtpU9aCCiHR6/qdh3/1qSnR5Y9R/51/gmdkwhY
 YakSxmgpgGrOJru94ApI1o/35eWwN/GxjajbfNY5ScrPQl/L0DF3iJWRsAOR5534
 p9e2gQqKecoE+MEn5JcGAXApA5xBLXuUmtWPUn5UGyhaz+jdmsf1zkDEOEvxREay
 hLGH1y6BY8HS/jytyNzISs9iDeBvg2fHmG8SskDiXVMke5sHBTU9MilgpnCFfQ0l
 OF/eNnTXTU7mAJhlnjBUt2rIe5peGSuhgg+Ur7s86xYqbj2SfsVM4UHjU0A6t9Jm
 sauWQh/Nbzw6XaCNzYKxP+dREAg0g/aq7xFqQi3bWx7YvzLk/hvNWi2+bv3adzx7
 Z3fvOki4xMXzLLrh0f1ipC8BKTsdioDZPAy06B80a0luv6ROdr6bPL7did14mWt2
 eCuPuZyXKhdV+PkjZHF+c4XT7N9NfGtE0WUQf54Q4VT00hDagGDliwXpm4ht1pjJ
 iO7uUJevXKSxMaV2xPZ+nWZaOeCVrMMTA1Ec1ELgC1n8WROZJ+SfhehgMQGp7BHS
 Hz4QO1HjTsCDnT+OU7JFeCRrkyXIlh75MOndWOOH6eTEXCAI9PihstB+UGXeNsK0
 BesNQz1sYY1O
 =g48u
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These add ACPI support to the intel_idle driver along with an admin
  guide document for it, add support for CPR (Core Power Reduction) to
  the AVS (Adaptive Voltage Scaling) subsystem, add new hardware support
  in a few places, add some new sysfs attributes, debugfs files and
  tracepoints, fix bugs and clean up a bunch of things all over.

  Specifics:

   - Update the ACPI processor driver in order to export
     acpi_processor_evaluate_cst() to the code outside of it, add ACPI
     support to the intel_idle driver based on that and clean up that
     driver somewhat (Rafael Wysocki).

   - Add an admin guide document for the intel_idle driver (Rafael
     Wysocki).

   - Clean up cpuidle core and drivers, enable compilation testing for
     some of them (Benjamin Gaignard, Krzysztof Kozlowski, Rafael
     Wysocki, Yangtao Li).

   - Fix reference counting of OPP (operating performance points) table
     structures (Viresh Kumar).

   - Add support for CPR (Core Power Reduction) to the AVS (Adaptive
     Voltage Scaling) subsystem (Niklas Cassel, Colin Ian King,
     YueHaibing).

   - Add support for TigerLake Mobile and JasperLake to the Intel RAPL
     power capping driver (Zhang Rui).

   - Update cpufreq drivers:
      - Add i.MX8MP support to imx-cpufreq-dt (Anson Huang).
      - Fix usage of a macro in loongson2_cpufreq (Alexandre Oliva).
      - Fix cpufreq policy reference counting issues in s3c and
        brcmstb-avs (chenqiwu).
      - Fix ACPI table reference counting issue and HiSilicon quirk
        handling in the CPPC driver (Hanjun Guo).
      - Clean up spelling mistake in intel_pstate (Harry Pan).
      - Convert the kirkwood and tegra186 drivers to using
        devm_platform_ioremap_resource() (Yangtao Li).

   - Update devfreq core:
      - Add 'name' sysfs attribute for devfreq devices (Chanwoo Choi).
      - Clean up the handing of transition statistics and allow them to
        be reset by writing 0 to the 'trans_stat' devfreq device
        attribute in sysfs (Kamil Konieczny).
      - Add 'devfreq_summary' to debugfs (Chanwoo Choi).
      - Clean up kerneldoc comments and Kconfig indentation (Krzysztof
        Kozlowski, Randy Dunlap).

   - Update devfreq drivers:
      - Add dynamic scaling for the imx8m DDR controller and clean up
        imx8m-ddrc (Leonard Crestez, YueHaibing).
      - Fix DT node reference counting and nitialization error code path
        in rk3399_dmc and add COMPILE_TEST and HAVE_ARM_SMCCC dependency
        for it (Chanwoo Choi, Yangtao Li).
      - Fix DT node reference counting in rockchip-dfi and make it use
        devm_platform_ioremap_resource() (Yangtao Li).
      - Fix excessive stack usage in exynos-ppmu (Arnd Bergmann).
      - Fix initialization error code paths in exynos-bus (Yangtao Li).
      - Clean up exynos-bus and exynos somewhat (Artur Świgoń, Krzysztof
        Kozlowski).

   - Add tracepoints for tracking usage_count updates unrelated to
     status changes in PM-runtime (Michał Mirosław).

   - Add sysfs attribute to control the "sync on suspend" behavior
     during system-wide suspend (Jonas Meurer).

   - Switch system-wide suspend tests over to 64-bit time (Alexandre
     Belloni).

   - Make wakeup sources statistics in debugfs cover deleted ones which
     used to be the case some time ago (zhuguangqing).

   - Clean up computations carried out during hibernation, update
     messages related to hibernation and fix a spelling mistake in one
     of them (Wen Yang, Luigi Semenzato, Colin Ian King).

   - Add mailmap entry for maintainer e-mail address that has not been
     functional for several years (Rafael Wysocki)"

* tag 'pm-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (83 commits)
  cpufreq: loongson2_cpufreq: adjust cpufreq uses of LOONGSON_CHIPCFG
  intel_idle: Clean up irtl_2_usec()
  intel_idle: Move 3 functions closer to their callers
  intel_idle: Annotate initialization code and data structures
  intel_idle: Move and clean up intel_idle_cpuidle_devices_uninit()
  intel_idle: Rearrange intel_idle_cpuidle_driver_init()
  intel_idle: Clean up NULL pointer check in intel_idle_init()
  intel_idle: Fold intel_idle_probe() into intel_idle_init()
  intel_idle: Eliminate __setup_broadcast_timer()
  cpuidle: fix cpuidle_find_deepest_state() kerneldoc warnings
  cpuidle: sysfs: fix warnings when compiling with W=1
  cpuidle: coupled: fix warnings when compiling with W=1
  cpufreq: brcmstb-avs: fix imbalance of cpufreq policy refcount
  PM: suspend: Add sysfs attribute to control the "sync on suspend" behavior
  PM / devfreq: Add debugfs support with devfreq_summary file
  Documentation: admin-guide: PM: Add intel_idle document
  cpuidle: arm: Enable compile testing for some of drivers
  PM-runtime: add tracepoints for usage_count changes
  cpufreq: intel_pstate: fix spelling mistake: "Whethet" -> "Whether"
  PM: hibernate: fix spelling mistake "shapshot" -> "snapshot"
  ...
 2020-01-27 11:23:54 -08:00
Linus Torvalds
a5b871c91d dmaengine updates for v5.6-rc1 
- Core:
    - Support for dynamic channels
    - Removal of various slave wrappers
    - Make few slave request APIs as private to dmaengine
    - Symlinks between channels and slaves
    - Support for hotplug of controllers
    - Support for metadata_ops for dma_async_tx_descriptor
    - Reporting DMA cached data amount
    - Virtual dma channel locking updates
 
  - New drivers/device/feature support support:
    - Driver for Intel data accelerators
    - Driver for TI K3 UDMA
    - Driver for PLX DMA engine
    - Driver for hisilicon Kunpeng DMA engine
    - Support for eDMA support for QorIQ LS1028A in fsl edma driver
    - Support for cyclic dma in sun4i driver
    - Support for X1830 in JZ4780 driver
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAl4u+QkACgkQfBQHDyUj
 g0cCcg//awBruofTHIrBOwHmCX1a09mw5WmkFG48N7tYp4fvaI1aOgs3hH9PZiBG
 fFZUktodwYpEKg6JJOfm1RnLBuKm0+3zmaKGPdK1RcbaDURh8G9qhW65f4mfImvB
 GXlgw59WKtgPAM9zWW9UxjugAk4DBte5xVKYJUsI0t4P7k9TM4i0Fv0VmMUhhDuo
 buPD1cM/GWFHbE7OYJ51aGRtrOHV1nPgQaHBkWaT7EotzGsZ3gtWYzteI3BRXRV/
 IkSgxOefMkIgu1j3KIxFZ1CJDHCZSnx2B+AEMCcp63osyeHBOYoL7KQxo6tBjaRV
 fbCasbkTkvvJUjyZdtOdU2wqf7ZqoDkD+n5nkpENf4G1M8J5RiHmrFq96m3HRonE
 V1bmMslXhsJlvtoT6ec2iJFchiq0nx1XHyST6faUOK+0cd1lzbogWwztydQH4fwd
 TxfEd+eYlFFu3lGDfRp14Tz7fAcFNPZ2bJQhZkF6RpwUW3y3L0cJc3Y0AcWmNkvJ
 oStvTlbbUvgRgO7rvEyAmdPb31lE6PLaA0WCahcvf4zQxxNMyYyaWP73MegvqJGO
 pfJXBOWBTTKwu0fDR5UHJd3tEDABvcZnwBaCSYrpI5f9bJ4NRI3f4DIMwLBnw9IK
 aH6pzwo4gTAMuvxzq8KeTp3hU7kszyUN8q8hiTZlgVozMLKXhQY=
 =mv1v
 -----END PGP SIGNATURE-----

Merge tag 'dmaengine-5.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:
 "This time we have a bunch of core changes to support dynamic channels,
  hotplug of controllers, new apis for metadata ops etc along with new
  drivers for Intel data accelerators, TI K3 UDMA, PLX DMA engine and
  hisilicon Kunpeng DMA engine. Also usual assorted updates to drivers.

  Core:
   - Support for dynamic channels
   - Removal of various slave wrappers
   - Make few slave request APIs as private to dmaengine
   - Symlinks between channels and slaves
   - Support for hotplug of controllers
   - Support for metadata_ops for dma_async_tx_descriptor
   - Reporting DMA cached data amount
   - Virtual dma channel locking updates

  New drivers/device/feature support support:
   - Driver for Intel data accelerators
   - Driver for TI K3 UDMA
   - Driver for PLX DMA engine
   - Driver for hisilicon Kunpeng DMA engine
   - Support for eDMA support for QorIQ LS1028A in fsl edma driver
   - Support for cyclic dma in sun4i driver
   - Support for X1830 in JZ4780 driver"

* tag 'dmaengine-5.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (62 commits)
  dmaengine: Create symlinks between DMA channels and slaves
  dmaengine: hisilicon: Add Kunpeng DMA engine support
  dmaengine: idxd: add char driver to expose submission portal to userland
  dmaengine: idxd: connect idxd to dmaengine subsystem
  dmaengine: idxd: add descriptor manipulation routines
  dmaengine: idxd: add sysfs ABI for idxd driver
  dmaengine: idxd: add configuration component of driver
  dmaengine: idxd: Init and probe for Intel data accelerators
  dmaengine: add support to dynamic register/unregister of channels
  dmaengine: break out channel registration
  x86/asm: add iosubmit_cmds512() based on MOVDIR64B CPU instruction
  dmaengine: ti: k3-udma: fix spelling mistake "limted" -> "limited"
  dmaengine: s3c24xx-dma: fix spelling mistake "to" -> "too"
  dmaengine: Move dma_get_{,any_}slave_channel() to private dmaengine.h
  dmaengine: Remove dma_request_slave_channel_compat() wrapper
  dmaengine: Remove dma_device_satisfies_mask() wrapper
  dt-bindings: fsl-imx-sdma: Add i.MX8MM/i.MX8MN/i.MX8MP compatible string
  dmaengine: zynqmp_dma: fix burst length configuration
  dmaengine: sun4i: Add support for cyclic requests with dedicated DMA
  dmaengine: fsl-qdma: fix duplicated argument to &&
  ...
 2020-01-27 10:55:50 -08:00
Linus Torvalds
08c49dc135 platform-drivers-x86 for v5.6-1 
* Enable thermal policy for ASUS TUF FX705DY/FX505DY
 * Support left round button on ASUS N56VB
 * Support new Mellanox platforms of basic class VMOD0009 and VMOD0010
 * Intel Comet Lake, Tiger Lake and Elkhart Lake support in the PMC driver
 * Big clean up to Intel PMC core, PMC IPC and SCU IPC drivers
 * Touchscreen support for the PiPO W11 tablet
 
 The following is an automated git shortlog grouped by driver:
 
 asus-nb-wmi:
  -  Support left round button on N56VB
 
 asus-wmi:
  -  Fix keyboard brightness cannot be set to 0
  -  Set throttle thermal policy to default
  -  Support throttle thermal policy
 
 Documentation/ABI:
  -  Add new attribute for mlxreg-io sysfs interfaces
  -  Style changes
  -  Add missed attribute for mlxreg-io sysfs interfaces
  -  Fix documentation inconsistency for mlxreg-io sysfs interfaces
 
 GPD pocket fan:
  -  Allow somewhat lower/higher temperature limits
  -  Use default values when wrong modparams are given
 
 intel_atomisp2_pm:
  -  Spelling fixes
  -  Refactor timeout loop
 
 intel_mid_powerbtn:
  -  Take a copy of ddata
 
 intel_pmc_core:
  -  update Comet Lake platform driver
  -  Fix spelling of MHz unit
  -  Fix indentation in function definitions
  -  Put more stuff under #ifdef DEBUG_FS
  -  Respect error code of kstrtou32_from_user()
  -  Add Intel Elkhart Lake support
  -  Add Intel Tiger Lake support
  -  Make debugfs entry for pch_ip_power_gating_status conditional
  -  Create platform dependent bitmap structs
  -  Remove unnecessary assignments
  -  Clean up: Remove comma after the termination line
 
 intel_pmc_ipc:
  -  Switch to use driver->dev_groups
  -  Propagate error from kstrtoul()
  -  Use octal permissions in sysfs attributes
  -  Get rid of unnecessary includes
  -  Drop ipc_data_readb()
  -  Drop intel_pmc_gcr_read() and intel_pmc_gcr_write()
  -  Make intel_pmc_ipc_raw_cmd() static
  -  Make intel_pmc_ipc_simple_command() static
  -  Make intel_pmc_gcr_update() static
 
 intel_scu_ipc:
  -  Reformat kernel-doc comments of exported functions
  -  Drop intel_scu_ipc_raw_command()
  -  Drop intel_scu_ipc_io[read|write][8|16]()
  -  Drop unused macros
  -  Drop unused prototype intel_scu_ipc_fw_update()
  -  Sleeping is fine when polling
  -  Drop intel_scu_ipc_i2c_cntrl()
  -  Remove Lincroft support
  -  Add constants for register offsets
  -  Fix interrupt support
 
 intel_scu_ipcutil:
  -  Remove default y from Kconfig
 
 intel_telemetry_debugfs:
  -  Respect error code of kstrtou32_from_user()
 
 intel_telemetry_pltdrv:
  -  use devm_platform_ioremap_resource()
 
 mlx-platform:
  -  Add support for next generation systems
  -  Add support for new capability register
  -  Add support for new system type
  -  Set system mux configuration based on system type
  -  Add more definitions for system attributes
  -  Cosmetic changes
 
 platform/mellanox:
  -  mlxreg-hotplug: Add support for new capability register
  -  fix potential deadlock in the tmfifo driver
 
 tools/power/x86/intel-speed-select:
  -  Update version
  -  Change the order for clos disable
  -  Fix result display for turbo-freq auto mode
  -  Add support for core-power discovery
  -  Allow additional core-power mailbox commands
  -  Update MAINTAINERS for the intel uncore frequency control
  -  Add support for Uncore frequency control
 
 touchscreen_dmi:
  -  Fix indentation in several places
  -  Add info for the PiPO W11 tablet
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEqaflIX74DDDzMJJtb7wzTHR8rCgFAl4uxRcACgkQb7wzTHR8
 rCjV3xAArz8e4FmFRe77LF83BHduBYkMjnobDFqWa+BhUicapezU4121K/k1cSBi
 MRhYOK3+lZvMqFTbjFatgkCapjma34+6xMJztrT/drCgmxHzsLQgJsmJ3pXWqnYM
 t4CcPOjvjmZbNJT0NdKjeNyCwFGG6Lupf82fVfIXIshtaKE3xw51242+PJEI978i
 2VL3Ck0NL1stgUkKf/ppHkqsjLb0s6IBtgWv052s/0SlHT7RlFAonsCBxIktVa5L
 divCtnWJKRhbalCPnKOJ1Q6/kpR/BSNq6OddcgaACKH9i0d5KwtdNDdQ66FkEidN
 4rKK3gYMLRpgpLjApH91n7jWMQUaJawVN/3WuRfdnwQOcJ/PVY5vosv2yHKMy3yB
 mFLG0G2v3cXEmvRNEyeKBpSkOrAnsoylFt8zLN6/OP3cQ/jdrnq+UpurxRnBEGkm
 ZDbs5FYqjAPMyjL+/ldhndIdIqvusVgrl2V93BuAzN080UvkQ2FKjLnk0Dkc/xmZ
 XbXUAn+BCUpmABstLa7NJGruV3O9IdiSLHW5Cr0NZC74h4nHqDS57At7LkQbphkC
 Pt/+7tirpaEvSbgQZsVI0WfOwDjJf79FT4dYtCY1GkmSvmvF+OUgKicfEZsfuDan
 hLez0resoJkHLeJtcrF1lW3l3kyMaokBmkUhB1skOYlLUvcsOwg=
 =rMop
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v5.6-1' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform driver updates from Andy Shevchenko:

 - Enable thermal policy for ASUS TUF FX705DY/FX505DY

 - Support left round button on ASUS N56VB

 - Support new Mellanox platforms of basic class VMOD0009 and VMOD0010

 - Intel Comet Lake, Tiger Lake and Elkhart Lake support in the PMC
   driver

 - Big clean-up to Intel PMC core, PMC IPC and SCU IPC drivers

 - Touchscreen support for the PiPO W11 tablet

* tag 'platform-drivers-x86-v5.6-1' of git://git.infradead.org/linux-platform-drivers-x86: (64 commits)
  platform/x86: intel_pmc_ipc: Switch to use driver->dev_groups
  platform/x86: intel_pmc_ipc: Propagate error from kstrtoul()
  platform/x86: intel_pmc_ipc: Use octal permissions in sysfs attributes
  platform/x86: intel_pmc_ipc: Get rid of unnecessary includes
  platform/x86: intel_pmc_ipc: Drop ipc_data_readb()
  platform/x86: intel_pmc_ipc: Drop intel_pmc_gcr_read() and intel_pmc_gcr_write()
  platform/x86: intel_pmc_ipc: Make intel_pmc_ipc_raw_cmd() static
  platform/x86: intel_pmc_ipc: Make intel_pmc_ipc_simple_command() static
  platform/x86: intel_pmc_ipc: Make intel_pmc_gcr_update() static
  platform/x86: intel_scu_ipc: Reformat kernel-doc comments of exported functions
  platform/x86: intel_scu_ipc: Drop intel_scu_ipc_raw_command()
  platform/x86: intel_scu_ipc: Drop intel_scu_ipc_io[read|write][8|16]()
  platform/x86: intel_scu_ipc: Drop unused macros
  platform/x86: intel_scu_ipc: Drop unused prototype intel_scu_ipc_fw_update()
  platform/x86: intel_scu_ipc: Sleeping is fine when polling
  platform/x86: intel_scu_ipc: Drop intel_scu_ipc_i2c_cntrl()
  platform/x86: intel_scu_ipc: Remove Lincroft support
  platform/x86: intel_scu_ipc: Add constants for register offsets
  platform/x86: intel_scu_ipc: Fix interrupt support
  platform/x86: intel_scu_ipcutil: Remove default y from Kconfig
  ...
 2020-01-27 10:42:35 -08:00
Rafael J. Wysocki
c102671af0 Merge branch 'pm-devfreq' 
* pm-devfreq: (24 commits)
  PM / devfreq: Add debugfs support with devfreq_summary file
  PM / devfreq: exynos: Rename Exynos to lowercase
  PM / devfreq: imx8m-ddrc: Fix inconsistent IS_ERR and PTR_ERR
  PM / devfreq: exynos-bus: Add error log when fail to get devfreq-event
  PM / devfreq: exynos-bus: Disable devfreq-event device when fails
  PM / devfreq: rk3399_dmc: Disable devfreq-event device when fails
  PM / devfreq: imx8m-ddrc: Remove unused defines
  PM / devfreq: exynos-bus: Reduce goto statements and remove unused headers
  PM / devfreq: rk3399_dmc: Add COMPILE_TEST and HAVE_ARM_SMCCC dependency
  PM / devfreq: rockchip-dfi: Convert to devm_platform_ioremap_resource
  PM / devfreq: rk3399_dmc: Add missing of_node_put()
  PM / devfreq: rockchip-dfi: Add missing of_node_put()
  PM / devfreq: Fix multiple kernel-doc warnings
  PM / devfreq: exynos-bus: Extract exynos_bus_profile_init_passive()
  PM / devfreq: exynos-bus: Extract exynos_bus_profile_init()
  PM / devfreq: Move declaration of DEVICE_ATTR_RW(min_freq)
  PM / devfreq: Move statistics to separate struct devfreq_stats
  PM / devfreq: Add clearing transitions stats
  PM / devfreq: Change time stats to 64-bit
  PM / devfreq: Add new name attribute for sysfs
  ...
 2020-01-27 11:30:38 +01:00
Rafael J. Wysocki
245224d1cb Merge branches 'pm-cpufreq' and 'pm-sleep' 
* pm-cpufreq:
  cpufreq: loongson2_cpufreq: adjust cpufreq uses of LOONGSON_CHIPCFG
  cpufreq: brcmstb-avs: fix imbalance of cpufreq policy refcount
  cpufreq: intel_pstate: fix spelling mistake: "Whethet" -> "Whether"
  cpufreq: s3c: fix unbalances of cpufreq policy refcount
  cpufreq: imx-cpufreq-dt: Add i.MX8MP support
  cpufreq: Use imx-cpufreq-dt for i.MX8MP's speed grading
  cpufreq: tegra186: convert to devm_platform_ioremap_resource
  cpufreq: kirkwood: convert to devm_platform_ioremap_resource
  cpufreq: CPPC: put ACPI table after using it
  cpufreq : CPPC: Break out if HiSilicon CPPC workaround is matched

* pm-sleep:
  PM: suspend: Add sysfs attribute to control the "sync on suspend" behavior
  PM: hibernate: fix spelling mistake "shapshot" -> "snapshot"
  PM: hibernate: Add more logging on hibernation failure
  PM: hibernate: improve arithmetic division in preallocate_highmem_fraction()
  PM: wakeup: Show statistics for deleted wakeup sources again
  PM: sleep: Switch to rtc_time64_to_tm()/rtc_tm_to_time64()
 2020-01-27 11:29:09 +01:00
Rafael J. Wysocki
5b82ba70de Merge branch 'pm-cpuidle' 
* pm-cpuidle: (27 commits)
  intel_idle: Clean up irtl_2_usec()
  intel_idle: Move 3 functions closer to their callers
  intel_idle: Annotate initialization code and data structures
  intel_idle: Move and clean up intel_idle_cpuidle_devices_uninit()
  intel_idle: Rearrange intel_idle_cpuidle_driver_init()
  intel_idle: Clean up NULL pointer check in intel_idle_init()
  intel_idle: Fold intel_idle_probe() into intel_idle_init()
  intel_idle: Eliminate __setup_broadcast_timer()
  cpuidle: fix cpuidle_find_deepest_state() kerneldoc warnings
  cpuidle: sysfs: fix warnings when compiling with W=1
  cpuidle: coupled: fix warnings when compiling with W=1
  Documentation: admin-guide: PM: Add intel_idle document
  cpuidle: arm: Enable compile testing for some of drivers
  cpuidle: Drop unused cpuidle_driver_ref/unref() functions
  intel_idle: Use ACPI _CST on server systems
  intel_idle: Add module parameter to prevent ACPI _CST from being used
  intel_idle: Allow ACPI _CST to be used for selected known processors
  cpuidle: Allow idle states to be disabled by default
  intel_idle: Use ACPI _CST for processor models without C-state tables
  intel_idle: Refactor intel_idle_cpuidle_driver_init()
  ...
 2020-01-27 11:28:57 +01:00
Peter Chen
880082666c Doc: ABI: add usb charger uevent 
When the USB charger is inserted or removed, the users could get
USB charger state and type through the uevent.

Signed-off-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/1579145333-1657-2-git-send-email-peter.chen@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2020-01-24 09:41:27 +01:00
Jing Lin
b131ad5938 dmaengine: idxd: add sysfs ABI for idxd driver 
Add the sysfs ABI information for idxd driver in
Documentation/ABI/stable directory.

Signed-off-by: Jing Lin <jing.lin@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/157965025170.73301.13428570530450446901.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
 2020-01-24 11:18:45 +05:30
Hridya Valsaraju
fc7100ea2a f2fs: Add f2fs stats to sysfs 
Currently f2fs stats are only available from /d/f2fs/status. This patch
adds some of the f2fs stats to sysfs so that they are accessible even
when debugfs is not mounted.

The following sysfs nodes are added:
-/sys/fs/f2fs/<disk>/free_segments
-/sys/fs/f2fs/<disk>/cp_foreground_calls
-/sys/fs/f2fs/<disk>/cp_background_calls
-/sys/fs/f2fs/<disk>/gc_foreground_calls
-/sys/fs/f2fs/<disk>/gc_background_calls
-/sys/fs/f2fs/<disk>/moved_blocks_foreground
-/sys/fs/f2fs/<disk>/moved_blocks_background
-/sys/fs/f2fs/<disk>/avg_vblocks

Signed-off-by: Hridya Valsaraju <hridya@google.com>
[Jaegeuk Kim: allow STAT_FS without DEBUG_FS]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
 2020-01-23 09:24:25 -08:00
Rafael J. Wysocki
322e929d19 Merge back new material related to system-wide PM for v5.6. 2020-01-23 16:00:56 +01:00
Hridya Valsaraju
f5fa7c8bb6 f2fs: delete duplicate information on sysfs nodes 
This patch merges the sysfs node documentation present in
Documentation/filesystems/f2fs.txt and
Documentation/ABI/testing/sysfs-fs-f2fs
and deletes the duplicate information from
Documentation/filesystems/f2fs.txt. This is to prevent having to update
both files when a new sysfs node is added for f2fs.
The patch also makes minor formatting changes to
Documentation/ABI/testing/sysfs-fs-f2fs.

Signed-off-by: Hridya Valsaraju <hridya@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
 2020-01-22 17:14:14 -08:00
Rafael J. Wysocki
e6cf623ba3 Merge branch 'intel_idle+acpi' 
Merge changes updating the ACPI processor driver in order to export
acpi_processor_evaluate_cst() to the code outside of it and adding
ACPI support to the intel_idle driver based on that.

* intel_idle+acpi:
  Documentation: admin-guide: PM: Add intel_idle document
  intel_idle: Use ACPI _CST on server systems
  intel_idle: Add module parameter to prevent ACPI _CST from being used
  intel_idle: Allow ACPI _CST to be used for selected known processors
  cpuidle: Allow idle states to be disabled by default
  intel_idle: Use ACPI _CST for processor models without C-state tables
  intel_idle: Refactor intel_idle_cpuidle_driver_init()
  ACPI: processor: Export acpi_processor_evaluate_cst()
  ACPI: processor: Make ACPI_PROCESSOR_CSTATE depend on ACPI_PROCESSOR
  ACPI: processor: Clean up acpi_processor_evaluate_cst()
  ACPI: processor: Introduce acpi_processor_evaluate_cst()
  ACPI: processor: Export function to claim _CST control
 2020-01-23 00:35:50 +01:00
Jerry Snitselaar
7084eddf6b tpm: Add tpm_version_major sysfs file 
Easily determining what TCG version a tpm device implements
has been a pain point for userspace for a long time, so
add a sysfs file to report the TCG major version of a tpm device.

Also add an entry to Documentation/ABI/stable/sysfs-class-tpm
describing the new file.

Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-integrity@vger.kernel.org
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
 2020-01-22 10:46:51 +02:00
Jerry Snitselaar
c269e876c5 tpm: Update mailing list contact information in sysfs-class-tpm 
All of the entries in Documentation/ABI/stable/sysfs-class-tpm
point to the old tpmdd-devel mailing list. This patch
updates the entries to point to linux-intergrity.

Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-integrity@vger.kernel.org
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
 2020-01-22 10:33:02 +02:00
Greg Kroah-Hartman
c318f074d9 Merge 5.5-rc7 into staging-next 
We want the staging fixes in here as well

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2020-01-22 09:05:34 +01:00
Greg Kroah-Hartman
dd7d99dc68 Merge 5.5-rc7 into usb-next 
We need the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2020-01-21 19:36:59 +01:00
David S. Miller
b3f7e3f23a Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/net 2020-01-19 22:10:04 +01:00
Florian Fainelli
080bb352fa net: phy: Maintain MDIO device and bus statistics 
We maintain global statistics for an entire MDIO bus, as well as broken
down, per MDIO bus address statistics. Given that it is possible for
MDIO devices such as switches to access MDIO bus addresses for which
there is not a mdio_device instance created (therefore not a a
corresponding device directory in sysfs either), we also maintain
per-address statistics under the statistics folder. The layout looks
like this:

/sys/class/mdio_bus/../statistics/
	transfers
	errrors
	writes
	reads
	transfers_<addr>
	errors_<addr>
	writes_<addr>
	reads_<addr>

When a mdio_device instance is registered, a statistics/ folder is
created with the tranfers, errors, writes and reads attributes which
point to the appropriate MDIO bus statistics structure.

Statistics are 64-bit unsigned quantities and maintained through the
u64_stats_sync.h helper functions.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2020-01-17 11:12:44 +01:00
Jonas Meurer
c052bf82c6 PM: suspend: Add sysfs attribute to control the "sync on suspend" behavior 
The sysfs attribute `/sys/power/sync_on_suspend` controls, whether or not
filesystems are synced by the kernel before system suspend.

Congruously, the behaviour of build-time switch CONFIG_SUSPEND_SKIP_SYNC
is slightly changed: It now defines the run-tim default for the new sysfs
attribute `/sys/power/sync_on_suspend`.

The run-time attribute is added because the existing corresponding
build-time Kconfig flag for (`CONFIG_SUSPEND_SKIP_SYNC`) is not flexible
enough. E.g. Linux distributions that provide pre-compiled kernels
usually want to stick with the default (sync filesystems before suspend)
but under special conditions this needs to be changed.

One example for such a special condition is user-space handling of
suspending block devices (e.g. using `cryptsetup luksSuspend` or `dmsetup
suspend`) before system suspend. The Kernel trying to sync filesystems
after the underlying block device already got suspended obviously leads
to dead-locks. Be aware that you have to take care of the filesystem sync
yourself before suspending the system in those scenarios.

Signed-off-by: Jonas Meurer <jonas@freesources.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2020-01-16 21:47:03 +01:00
Marek Marczykowski-Górecki
476878e4b2 xen-pciback: optionally allow interrupt enable flag writes 
QEMU running in a stubdom needs to be able to set INTX_DISABLE, and the
MSI(-X) enable flags in the PCI config space. This adds an attribute
'allow_interrupt_control' which when set for a PCI device allows writes
to this flag(s). The toolstack will need to set this for stubdoms.
When enabled, guest (stubdomain) will be allowed to set relevant enable
flags, but only one at a time - i.e. it refuses to enable more than one
of INTx, MSI, MSI-X at a time.

This functionality is needed only for config space access done by device
model (stubdomain) serving a HVM with the actual PCI device. It is not
necessary and unsafe to enable direct access to those bits for PV domain
with the device attached. For PV domains, there are separate protocol
messages (XEN_PCI_OP_{enable,disable}_{msi,msix}) for this purpose.
Those ops in addition to setting enable bits, also configure MSI(-X) in
dom0 kernel - which is undesirable for PCI passthrough to HVM guests.

This should not introduce any new security issues since a malicious
guest (or stubdom) can already generate MSIs through other ways, see
[1] page 8. Additionally, when qemu runs in dom0, it already have direct
access to those bits.

This is the second iteration of this feature. First was proposed as a
direct Xen interface through a new hypercall, but ultimately it was
rejected by the maintainer, because of mixing pciback and hypercalls for
PCI config space access isn't a good design. Full discussion at [2].

[1]: https://invisiblethingslab.com/resources/2011/Software%20Attacks%20on%20Intel%20VT-d.pdf
[2]: https://xen.markmail.org/thread/smpgpws4umdzizze

[part of the commit message and sysfs handling]
Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com>
[the rest]
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
[boris: A few small changes suggested by Roger, some formatting changes]
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
 2020-01-15 16:50:13 -06:00
Thinh Nguyen
a02497033e usb: gadget: configfs: Add max_speed setting 
Some functions support speeds other than SuperSpeed. Add max_speed
attribute to configfs gadget allowing user to specify the maximum speed
the composite driver supports. The valid input speed names are
super-speed-plus, super-speed, high-speed, full-speed, and low-speed.

Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2020-01-15 10:39:21 +01:00
Dan Murphy
333853be56 power: supply: core: Update sysfs-class-power ABI document 
Add the "Over Current" string to /sys/class/power_supply/<supply_name>/health
description.

Fixes: e3e83cc601 ("power: supply: core: Add POWER_SUPPLY_HEALTH_OVERCURRENT constant")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
 2020-01-14 22:45:46 +01:00
Vadim Pasternak
f3efc406d6 Documentation/ABI: Add missed attribute for mlxreg-io sysfs interfaces 
Add missed "cpld4_version" attribute.

Fixes: 52675da1d0 ("Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
 2020-01-13 21:04:33 +02:00
Vadim Pasternak
f409482677 Documentation/ABI: Fix documentation inconsistency for mlxreg-io sysfs interfaces 
Fix attribute name from "jtag_enable", which described twice to
"cpld3_version", which is expected to be instead of second appearance
of "jtag_enable".

Fixes: 2752e34442 ("Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
 2020-01-13 21:04:33 +02:00
Vadim Pasternak
435d7e10c4 Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces 
Add documentation for the new attributes for:
- Exposing reset causes types asserted by: platform reset, SoC reset,
  AC power failure, software power off request.
- Setting and removing system VPD (EEPROM) hardware write protection.
- Voltage regulator devices configuration update status and firmware
  version.
- Setting PCIe ASIC reset to disable or enable state during PCIe root
  complex reset.
- System static topology identification, like system's static I2C
  topology, number and type of FPGA devices within the system and so on.

Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
 2020-01-13 21:02:46 +02:00
Vadim Pasternak
5358c1114d Documentation/ABI: Style changes 
Remove blank lines between "What" and "Date" keywords.
Start each section with "What" keyword.

Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
 2020-01-13 21:02:46 +02:00
Vadim Pasternak
74e56f5fde Documentation/ABI: Add missed attribute for mlxreg-io sysfs interfaces 
Add missed "cpld4_version" attribute.

Fixes: 52675da1d0 ("Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
 2020-01-13 21:02:46 +02:00
Vadim Pasternak
eea97b258f Documentation/ABI: Fix documentation inconsistency for mlxreg-io sysfs interfaces 
Fix attribute name from "jtag_enable", which described twice to
"cpld3_version", which is expected to be instead of second appearance
of "jtag_enable".

Fixes: 2752e34442 ("Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
 2020-01-13 21:02:45 +02:00
Leonid Maksymchuk
2daa86e78c platform/x86: asus_wmi: Support throttle thermal policy 
Throttle thermal policy ACPI device is used to control CPU cooling and
throttling. This patch adds sysfs entry for setting current mode and
Fn+F5 hotkey that switches to next.

Policy modes:
* 0x00 - default
* 0x01 - overboost
* 0x02 - silent

Signed-off-by: Leonid Maksymchuk <leonmaxx@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
 2020-01-10 11:57:22 +02:00
Greg Kroah-Hartman
821f7ce79f First set of new device support, features and cleanups for IIO in the 5.6 cycle 
New device support
 
 * ad7091r5 ADC
   - New driver with follow up patch adding scale and vref support.
   - DT bindings
 * ad7923
   - Support for ad7908, ad7918 and ad7928 added to driver.
 * bma180
   - Support the BMA254 accelerometer. Required fairly substantial rework
     to allow for small differences between this an existing parts.
 * bma400 accelerometer
   - New driver with follow up patch for regulator support.
   - DT bindings.
 * asc dlhl60d
   - New driver support this range of pressure and temperature sensors.
   - DT bindings.
 * ltc2496 ADC
   - New driver to support this ADC.
   - Split the existing LTC2497 driver generic component out and reuse.
   - DT bindings.
 * parallax ping
   - New driver supporting ultrasonic and laser tof distance sensors.
   - Bindings for these sensors.
 
 New features
 
 * core
   - New char type for read_raw returns, used for thermocouple types.
   - Rename read_first_n callback to read.   The reasons behind the original
     naming are lost to the mists of time.
 * ad799x
   - Allow pm_ops to disable device completely allowing regulator power down.
 * bma180
   - Enable basic regulator support.
 * dmaengine buffer
   - Report platform data alignment requirements via new ABI.
 * max31856
   - Add option to set mains filter rejection frequency and document
     new in_temp_filter_notch_center_frequency ABI.
   - Add support for configuring HW averaging (oversampling ratio)
   - Add runtime configuration of thermocouple type and document new ABI.
 * maxim-thermocouple
   - Add read only access to thermocouple type using new ABI, includes
     adding more specific compatibles to reflect which variant of the
     chip is being used.
 * mpu6050
   - Provide option to support the PMU9150 in package magnetometer directly
     rather than via auxiliary bus.
 * stm32_adc
   - Add overrun interrupt checks to detect if this happens.
 * st_lsm6dsx
   - Enable the sensor-hub support for lsm6dsm. Includes various reworks to
     allow this.
 
 Cleanups and minor fixes
 
 * Subsystem wide
   - Tidy up indentation in Kconfig and fix alphabetical order of AD7091R5.
   - Drop linux/gpio.h and linux/of_gpio.h from drivers that don't use them.
 * ad7266
   - Convert to GPIO descriptors.
 * ad7303
   - Avoid a dance with checking if the regulator is supplied by just
     using the optional request interface.
 * ad7887
   - Simplify channel specification assignment to enable adding more devices.
 * ad7923
   - Drop some unused and largely pointless defines of BOB_N==N variety.
   - Tidy up checkpatch warnings.
   - Add missing of_device_id table.
 * adf4350
   - Convert to GPIO descriptors.
 * ak8975
   - Convert to GPIO descriptors.
 * ADIS library and drivers
   - Expand scope of txrx_lock to cover all state and rename as state_lock
   - Add unlocked read / write to allow grouping of consecutive calls under
     single lock / unlock.
   - Add unlocked check_status, reset to allow grouping under single
     lock / unlock.
   - Remove remaining uses of core mlock for local state protection.
     mlock should never be used directly as it protects tightly defined
     core IIO device management state.
 * adis16240
   - Enforce only supported SPI mode on driver load + add DT binding doc.
 * atlas-ph-sensor
   - Rename to atlas-sensor given it now covers things beyond ph sensors.
 * bma180
   - Use local dev variable to tidy up code.
   - Use c99 style explicity .member assignment to make driver more readable.
 * bmp280
   - Drop ACPI support. No evidence this was used and appropriate ID is not
     registered.
   - Allow ACPI to bind device via PRP0001
 * dmaengine buffer
   - Use dma_request_chan instead of dma_request_slave_channel_reason as that
     ABI is going away.
   - Add module info to avoid tainting the kernel.
 * hts221
   - Avoid magic number defines when only used to fill structure elements
     that are self describing.
 * lm3533
   - Drop a stray semicolon.
 * max9611
   - Cleanup enum handling to be more resilient to future changes.
 * mpu6050
   - Delete MPU9150 from supported SPI devices as doesn't provide SPI.
   - Select I2C_MUX again after kbuild issue fixed elsewhere.
 * stm32-timer
   - Drop an unnecessary register update.
 * ssp_sensors
   - Convert to GPIO descriptors.
 * st_sensors
   - drop !CONFIG_ACPI defines as ACPI_PTR() will stop them being used
     anyway.
   - Make default platform data structures __maybe_unsued.
   - Fill in some missing kernel-doc function parameters.
 * st_lsm6dsx
   - white space fixes.
   - Mark some constants that aren't always used as __maybe_unused.
   - Drop of ID table guards as they just pervent use under ACPI.
   - Switch to device properties to allow ACPI usage.
 * st_uvis25
   - Drop acpi.h include as no ACPI APIs used.
 * ti-ads1015
   - Drop legacy platform data as no one seems to be using it.
   - Use the device property API instead of OF specific.
 * ti-ads7950
   - typo fix in error message.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAl4R2mwRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0Fogfow//Rfsrd2oiAwy4ypm70ZWGnr84C3O/Vpic
 Agwdd2/lHiCA2Gjg+n7ZT6XkKQmKiojuBMT05PuskEm5onJVQuSAKMVppXwU6UDP
 uOUS5MAbo87GLogzXJnAR/eCrx/VkC4UqFRBSi7IUIj+lTpjiOhmoqm78VTMxkgT
 hvp5PVN/mLNxNV3eVrR9uILjZLpbBjKjWil00IS2zj0o78sGtd2QtMIdTbn3iBLp
 m0ngCDww1KDH+idwbOIn8YX8GSK8mTjNV5q4r9+xnjoAk8RPk+H317idyRHCKfCM
 wWFSFB6u/oqtHXRgQVi3ndRrZnPLTycA/R20f3ezzhVYZzf3RpH8Upcx0lqqCmrB
 +ZTbYW1L7KL6zCSR4ZYIEmw2TeQngfCGy0yDoEDXm9V8/B2nGWFc3Iknq+fK415V
 7OgJCWAw6ybF2LZfJHpcuJTb0EPxCKnInHbRsaxCsSAPRyERSdAz8RLn3lpH/k2D
 X32Q9hz/6sXKzIAD1Y0jv8ll28D5S7d2FgaWufy1tpB+CMb0Mp0RQn+Ho8lNMh70
 Zh9SF8RvknAiCT9iHeVIdbJxoYEtMuCaDwScliukVcg12gVViY5VzXMbSV/4jCnZ
 bAVZDpcM3LVLxCGbWqCNxjQ9wle99LsVHRld/KDpOfI6VIYDb8Y900Nf6efkQkAs
 a6z6rhpVdDg=
 =8FmM
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new device support, features and cleanups for IIO in the 5.6 cycle

New device support

* ad7091r5 ADC
  - New driver with follow up patch adding scale and vref support.
  - DT bindings
* ad7923
  - Support for ad7908, ad7918 and ad7928 added to driver.
* bma180
  - Support the BMA254 accelerometer. Required fairly substantial rework
    to allow for small differences between this an existing parts.
* bma400 accelerometer
  - New driver with follow up patch for regulator support.
  - DT bindings.
* asc dlhl60d
  - New driver support this range of pressure and temperature sensors.
  - DT bindings.
* ltc2496 ADC
  - New driver to support this ADC.
  - Split the existing LTC2497 driver generic component out and reuse.
  - DT bindings.
* parallax ping
  - New driver supporting ultrasonic and laser tof distance sensors.
  - Bindings for these sensors.

New features

* core
  - New char type for read_raw returns, used for thermocouple types.
  - Rename read_first_n callback to read.   The reasons behind the original
    naming are lost to the mists of time.
* ad799x
  - Allow pm_ops to disable device completely allowing regulator power down.
* bma180
  - Enable basic regulator support.
* dmaengine buffer
  - Report platform data alignment requirements via new ABI.
* max31856
  - Add option to set mains filter rejection frequency and document
    new in_temp_filter_notch_center_frequency ABI.
  - Add support for configuring HW averaging (oversampling ratio)
  - Add runtime configuration of thermocouple type and document new ABI.
* maxim-thermocouple
  - Add read only access to thermocouple type using new ABI, includes
    adding more specific compatibles to reflect which variant of the
    chip is being used.
* mpu6050
  - Provide option to support the PMU9150 in package magnetometer directly
    rather than via auxiliary bus.
* stm32_adc
  - Add overrun interrupt checks to detect if this happens.
* st_lsm6dsx
  - Enable the sensor-hub support for lsm6dsm. Includes various reworks to
    allow this.

Cleanups and minor fixes

* Subsystem wide
  - Tidy up indentation in Kconfig and fix alphabetical order of AD7091R5.
  - Drop linux/gpio.h and linux/of_gpio.h from drivers that don't use them.
* ad7266
  - Convert to GPIO descriptors.
* ad7303
  - Avoid a dance with checking if the regulator is supplied by just
    using the optional request interface.
* ad7887
  - Simplify channel specification assignment to enable adding more devices.
* ad7923
  - Drop some unused and largely pointless defines of BOB_N==N variety.
  - Tidy up checkpatch warnings.
  - Add missing of_device_id table.
* adf4350
  - Convert to GPIO descriptors.
* ak8975
  - Convert to GPIO descriptors.
* ADIS library and drivers
  - Expand scope of txrx_lock to cover all state and rename as state_lock
  - Add unlocked read / write to allow grouping of consecutive calls under
    single lock / unlock.
  - Add unlocked check_status, reset to allow grouping under single
    lock / unlock.
  - Remove remaining uses of core mlock for local state protection.
    mlock should never be used directly as it protects tightly defined
    core IIO device management state.
* adis16240
  - Enforce only supported SPI mode on driver load + add DT binding doc.
* atlas-ph-sensor
  - Rename to atlas-sensor given it now covers things beyond ph sensors.
* bma180
  - Use local dev variable to tidy up code.
  - Use c99 style explicity .member assignment to make driver more readable.
* bmp280
  - Drop ACPI support. No evidence this was used and appropriate ID is not
    registered.
  - Allow ACPI to bind device via PRP0001
* dmaengine buffer
  - Use dma_request_chan instead of dma_request_slave_channel_reason as that
    ABI is going away.
  - Add module info to avoid tainting the kernel.
* hts221
  - Avoid magic number defines when only used to fill structure elements
    that are self describing.
* lm3533
  - Drop a stray semicolon.
* max9611
  - Cleanup enum handling to be more resilient to future changes.
* mpu6050
  - Delete MPU9150 from supported SPI devices as doesn't provide SPI.
  - Select I2C_MUX again after kbuild issue fixed elsewhere.
* stm32-timer
  - Drop an unnecessary register update.
* ssp_sensors
  - Convert to GPIO descriptors.
* st_sensors
  - drop !CONFIG_ACPI defines as ACPI_PTR() will stop them being used
    anyway.
  - Make default platform data structures __maybe_unsued.
  - Fill in some missing kernel-doc function parameters.
* st_lsm6dsx
  - white space fixes.
  - Mark some constants that aren't always used as __maybe_unused.
  - Drop of ID table guards as they just pervent use under ACPI.
  - Switch to device properties to allow ACPI usage.
* st_uvis25
  - Drop acpi.h include as no ACPI APIs used.
* ti-ads1015
  - Drop legacy platform data as no one seems to be using it.
  - Use the device property API instead of OF specific.
* ti-ads7950
  - typo fix in error message.

* tag 'iio-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (99 commits)
  iio: accel: bma180: BMA254 support
  iio: pressure: bmp280: Allow device to be enumerated from ACPI
  iio: pressure: bmp280: Drop ACPI support
  dt-bindings: iio: adc: convert sd modulator to json-schema
  iio: buffer: rename 'read_first_n' callback to 'read'
  iio: buffer-dmaengine: Report buffer length requirements
  bindings: iio: pressure: Add documentation for dlh driver
  dt-bindings: Add asc vendor
  iio: pressure: Add driver for DLH pressure sensors
  iio: buffer-dmaengine: Add module information
  iio: accel: bma180: Use explicit member assignment
  iio: accel: bma180: Basic regulator support
  iio: accel: bma180: Add dev helper variable
  iio: imu: st_lsm6dsx: enable sensor-hub support for lsm6dsm
  iio: imu: st_lsm6dsx: rename st_lsm6dsx_shub_read_reg in st_lsm6dsx_shub_read_output
  iio: imu: st_lsm6dsx: check if shub_output reg is located in primary page
  iio: imu: st_lsm6dsx: check if pull_up is located in primary page
  iio: imu: st_lsm6dsx: check if master_enable is located in primary page
  iio: imu: st_lsm6dsx: export max num of slave devices in st_lsm6dsx_shub_settings
  iio: light: remove unneeded semicolon
  ...
 2020-01-10 10:44:00 +01:00
Paul Moore
89b223bfb8 selinux: deprecate disabling SELinux and runtime 
Deprecate the CONFIG_SECURITY_SELINUX_DISABLE functionality.  The
code was originally developed to make it easier for Linux
distributions to support architectures where adding parameters to the
kernel command line was difficult.  Unfortunately, supporting runtime
disable meant we had to make some security trade-offs when it came to
the LSM hooks, as documented in the Kconfig help text:

  NOTE: selecting this option will disable the '__ro_after_init'
  kernel hardening feature for security hooks.   Please consider
  using the selinux=0 boot parameter instead of enabling this
  option.

Fortunately it looks as if that the original motivation for the
runtime disable functionality is gone, and Fedora/RHEL appears to be
the only major distribution enabling this capability at build time
so we are now taking steps to remove it entirely from the kernel.
The first step is to mark the functionality as deprecated and print
an error when it is used (what this patch is doing).  As Fedora/RHEL
makes progress in transitioning the distribution away from runtime
disable, we will introduce follow-up patches over several kernel
releases which will block for increasing periods of time when the
runtime disable is used.  Finally we will remove the option entirely
once we believe all users have moved to the kernel cmdline approach.

Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
 2020-01-07 10:19:43 -05:00
Kamil Konieczny
14a3439681 PM / devfreq: Add clearing transitions stats 
Add clearing transition table and time in states devfreq statistics
by writing 0 (zero) to trans_stat file in devfreq sysfs. An example use
is like following:

echo 0 > /sys/class/devfreq/devfreqX/trans_stat

Signed-off-by: Kamil Konieczny <k.konieczny@samsung.com>
[cw00.choi: Edit return value if entering the wrong value for reset
 and use arrary3_size() to get the size of 3-dimensional array]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
 2019-12-30 09:59:05 +09:00
Chanwoo Choi
2fee1a7cc6 PM / devfreq: Add new name attribute for sysfs 
The commit 4585fbcb53 ("PM / devfreq: Modify the device name as devfreq(X) for
sysfs") changed the node name to devfreq(x). After this commit, it is not
possible to get the device name through /sys/class/devfreq/devfreq(X)/*.

Add new name attribute in order to get device name.

Cc: stable@vger.kernel.org
Fixes: 4585fbcb53 ("PM / devfreq: Modify the device name as devfreq(X) for sysfs")
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
 2019-12-30 09:59:05 +09:00
Lars-Peter Clausen
4538c18568 iio: buffer-dmaengine: Report buffer length requirements 
The dmaengine buffer has some length alignment requirements that can differ
from platform to platform. If the length alignment requirements are not met
unexpected behavior like dropping of samples can occur.

Currently these requirements are not reported and applications need to know
the requirements of the platform by some out-of-band means.

Add a new buffer attribute that reports the length alignment requirements
called `length_align_bytes`. The reported length alignment is in bytes that
means the buffer length alignment in sample sets depends on the number of
enabled channels and the bytes per channel. Applications using this
attribute to determine the buffer size requirements need to consider this.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2019-12-29 15:20:09 +00:00
Rafael J. Wysocki
75a8026741 cpuidle: Allow idle states to be disabled by default 
In certain situations it may be useful to prevent some idle states
from being used by default while allowing user space to enable them
later on.

For this purpose, introduce a new state flag, CPUIDLE_FLAG_OFF, to
mark idle states that should be disabled by default, make the core
set CPUIDLE_STATE_DISABLED_BY_USER for those states at the
initialization time and add a new state attribute in sysfs,
"default_status", to inform user space of the initial status of
the given idle state ("disabled" if CPUIDLE_FLAG_OFF is set for it,
"enabled" otherwise).

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2019-12-27 11:02:08 +01:00
Liming Sun
77dcc95e20 platform/mellanox: fix the mlx-bootctl sysfs 
This is a follow-up commit for the sysfs attributes to change
from DRIVER_ATTR to DEVICE_ATTR according to some initial comments.
In such case, it's better to point the sysfs path to the device
itself instead of the driver. The ABI document is also updated.

Fixes: 79e29cb8fb ("platform/mellanox: Add bootctl driver for Mellanox BlueField Soc")
Signed-off-by: Liming Sun <lsun@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
 2019-12-20 19:00:50 +02:00
Alexandre Belloni
790a19f18a rtc: Document RTC_VL_READ and RTC_VL_CLR ioctls 
RTC_VL_READ and RTC_VL_CLR have been introduced in 2012 with commit
0f20b767e2 ("drivers/rtc/rtc-pcf8563.c: add RTC_VL_READ/RTC_VL_CLR ioctl
feature")

Document them now that they have been unified.

Link: https://lore.kernel.org/r/20191214220259.621996-3-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
 2019-12-18 10:37:20 +01:00
Lakshmi Ramasubramanian
e9085e0ad3 IMA: Add support to limit measuring keys 
Limit measuring keys to those keys being loaded onto a given set of
keyrings only and when the user id (uid) matches if uid is specified
in the policy.

This patch defines a new IMA policy option namely "keyrings=" that
can be used to specify a set of keyrings. If this option is specified
in the policy for "measure func=KEY_CHECK" then only the keys
loaded onto a keyring given in the "keyrings=" option are measured.

If uid is specified in the policy then the key is measured only if
the current user id matches the one specified in the policy.

Added a new parameter namely "keyring" (name of the keyring) to
process_buffer_measurement(). The keyring name is passed to
ima_get_action() to determine the required action.
ima_match_rules() is updated to check keyring in the policy, if
specified, for KEY_CHECK function.

Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
 2019-12-12 08:53:50 -05:00
Lakshmi Ramasubramanian
5808611ccc IMA: Add KEY_CHECK func to measure keys 
Measure keys loaded onto any keyring.

This patch defines a new IMA policy func namely KEY_CHECK to
measure keys. Updated ima_match_rules() to check for KEY_CHECK
and ima_parse_rule() to handle KEY_CHECK.

Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
 2019-12-12 08:53:50 -05:00
Linus Torvalds
63de37476e chrome platform changes for v5.5 
* CrOS EC / MFD / IIO
  - Contains tag-ib-chrome-mfd-iio-input-5.5, which is the first part of a
    series from Gwendal to refactor sensor code between MFD, CrOS EC, iio
    and input in order to add a new sensorhub driver and FIFO processing
 
 * Wilco EC:
  - Add support for Dell's USB PowerShare policy control, keyboard
    backlight LED driver, and a new test_event file.
  - Fixes use after free in wilco_ec's telemetry driver.
 
 * Misc:
  - bugfix in cros_usbpd_logger (missing destroy workqueue).
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQQCtZK6p/AktxXfkOlzbaomhzOwwgUCXeaqtwAKCRBzbaomhzOw
 wilIAQCQ3/dpAwg2skKYYf3RBLDJeDLA1id7rNSgMOXc2aKyTAD/fCQtNhwj+Hal
 W//04WWngTCQF5fkE9OCJrDwbm5eRwc=
 =uOGe
 -----END PGP SIGNATURE-----

Merge tag 'tag-chrome-platform-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform changes from Benson Leung:
 "CrOS EC / MFD / IIO:

   - Contains tag-ib-chrome-mfd-iio-input-5.5, which is the first part
     of a series from Gwendal to refactor sensor code between MFD, CrOS
     EC, iio and input in order to add a new sensorhub driver and FIFO
     processing

  Wilco EC:

   - Add support for Dell's USB PowerShare policy control, keyboard
     backlight LED driver, and a new test_event file.

   - Fixes use after free in wilco_ec's telemetry driver.

  Misc:

   - bugfix in cros_usbpd_logger (missing destroy workqueue)"

* tag 'tag-chrome-platform-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  platform/chrome: wilco_ec: fix use after free issue
  platform/chrome: cros_ec: Add Kconfig default for cros-ec-sensorhub
  Revert "Input: cros_ec_keyb: mask out extra flags in event_type"
  Revert "Input: cros_ec_keyb - add back missing mask for event_type"
  platform/chrome: cros_ec: handle MKBP more events flag
  platform/chrome: cros_ec: Do not attempt to register a non-positive IRQ number
  platform/chrome: cros-ec: Record event timestamp in the hard irq
  mfd / platform / iio: cros_ec: Register sensor through sensorhub
  iio / platform: cros_ec: Add cros-ec-sensorhub driver
  mfd / platform: cros_ec: Add sensor_count and make check_features public
  platform/chrome: cros_ec: Put docs with the code
  platform/chrome: cros_usbpd_logger: add missed destroy_workqueue in remove
  platform/chrome: cros_ec: Fix Kconfig indentation
  platform/chrome: wilco_ec: Add keyboard backlight LED support
  platform/chrome: wilco_ec: Add charging config driver
  platform/chrome: wilco_ec: Add Dell's USB PowerShare Policy control
  platform/chrome: wilco_ec: Add debugfs test_event file
 2019-12-03 14:37:12 -08:00
Linus Torvalds
537bd0a159 TTY/Serial patches for 5.5-rc1 
Here is the "big" tty and serial driver patches for 5.5-rc1.  It's a bit
 later in the merge window than normal as I wanted to make sure some
 last-minute patches applied to it were all sane.  They seem to be :)
 
 There's a lot of little stuff in here, for the tty core, and for lots of
 serial drivers:
 	- reverts of uartlite serial driver patches that were wrong
 	- msm-serial driver fixes
 	- serial core updates and fixes
 	- tty core fixes
 	- serial driver dma mapping api changes
 	- lots of other tiny fixes and updates for serial drivers
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXebFIQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ylnmACgjfMcfQWa7uC9Q6m2DaQaRMaW6QoAnjg+TgBB
 eW9EhvyXL2VbrsuUl+iH
 =Am9O
 -----END PGP SIGNATURE-----

Merge tag 'tty-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial updates from Greg KH:
 "Here is the "big" tty and serial driver patches for 5.5-rc1.

  It's a bit later in the merge window than normal as I wanted to make
  sure some last-minute patches applied to it were all sane. They seem
  to be :)

  There's a lot of little stuff in here, for the tty core, and for lots
  of serial drivers:

   - reverts of uartlite serial driver patches that were wrong

   - msm-serial driver fixes

   - serial core updates and fixes

   - tty core fixes

   - serial driver dma mapping api changes

   - lots of other tiny fixes and updates for serial drivers

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (58 commits)
  Revert "serial/8250: Add support for NI-Serial PXI/PXIe+485 devices"
  vcs: prevent write access to vcsu devices
  tty: vt: keyboard: reject invalid keycodes
  tty: don't crash in tty_init_dev when missing tty_port
  serial: stm32: fix clearing interrupt error flags
  tty: Fix Kconfig indentation, continued
  serial: serial_core: Perform NULL checks for break_ctl ops
  tty: remove unused argument from tty_open_by_driver()
  tty: Fix Kconfig indentation
  {tty: serial, nand: onenand}: samsung: rename to fix build warning
  serial: ifx6x60: add missed pm_runtime_disable
  serial: pl011: Fix DMA ->flush_buffer()
  Revert "serial-uartlite: Move the uart register"
  Revert "serial-uartlite: Add get serial id if not provided"
  Revert "serial-uartlite: Do not use static struct uart_driver out of probe()"
  Revert "serial-uartlite: Add runtime support"
  Revert "serial-uartlite: Change logic how console_port is setup"
  Revert "serial-uartlite: Use allocated structure instead of static ones"
  tty: serial: msm_serial: Use dma_request_chan() directly for channel request
  tty: serial: tegra: Use dma_request_chan() directly for channel request
  ...
 2019-12-03 14:09:14 -08:00
Linus Torvalds
c3bed3b20e pci-v5.5-changes 
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAl3leXUUHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vyY3g/9FAVVdPEaadNtAhQ/zIxcjozDovKq
 0q7yOA3aTBTUoNEinm88an6p0dcC4gNKtGukXmzVH2Hhxm9kLRdtpZGYY00tpLUB
 9rI7XsgwwHa+hLwsHbIs507sKGFGy5FLr0ChTTGLDEMppnEvjA2hZooYmcB/OgrC
 LlFcwbNKGOk/Si9u2bF2nLO0JDoVHnwzpF99saew/nqc7Lfj9e9IPZFom+VjPBUh
 AOvRp2H7uBN+WQlpLeFeMDDoeXh34lX0kYqIV/cVkXVnknDGYKV2CBTg2aeX7jd0
 QiPHZh6zlW8zNQgaCZRiBAbatVEOnRMRJ++yiqB8hBYp1LMXm6kJ01YSQpXkugoY
 Vp9dtzzTARWV/XkKwD4brw9ZEmIDnO+Ed2x2VbUkPJVcXAvzSQWAx82IU0Iuqmcb
 9qr6U2Zf/Xk5aFlGPYVH8QOG+QqzIbZNRQ7NlhDlITyW4P6QPu0mw374yYP2wDGL
 sP5YSS3YGa0sQcEgDtVnd4z+WTZI4AwXLPaeaLkDhdfHp2FsERUY4TrPs33J99xw
 og4EyokVFzjYzlnBPU6WWn7LL+jj5ccXkL3MA4DR4FJOnNGHh7NXfQUH56rrgsq7
 F9/8shL5DuTbQkde1uSyUG9Iq/RigVLlV5DQavFm3dSXvZi0E16t5alC5URNTzk7
 at8Bogn53QhlmYc=
 =uUXw
 -----END PGP SIGNATURE-----

Merge tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Warn if a host bridge has no NUMA info (Yunsheng Lin)

   - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis
     Efremov)

  Resource management:

   - Fix boot-time Embedded Controller GPE storm caused by incorrect
     resource assignment after ACPI Bus Check Notification (Mika
     Westerberg)

   - Protect pci_reassign_bridge_resources() against concurrent
     addition/removal (Benjamin Herrenschmidt)

   - Fix bridge dma_ranges resource list cleanup (Rob Herring)

   - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control
     the MMIO and prefetchable MMIO window sizes of hotplug bridges
     independently (Nicholas Johnson)

   - Fix MMIO/MMIO_PREF window assignment that assigned more space than
     desired (Nicholas Johnson)

   - Only enforce bus numbers from bridge EA if the bridge has EA
     devices downstream (Subbaraya Sundeep)

   - Consolidate DT "dma-ranges" parsing and convert all host drivers to
     use shared parsing (Rob Herring)

  Error reporting:

   - Restore AER capability after resume (Mayurkumar Patel)

   - Add PoisonTLPBlocked AER counter (Rajat Jain)

   - Use for_each_set_bit() to simplify AER code (Andy Shevchenko)

   - Fix AER kernel-doc (Andy Shevchenko)

   - Add "pcie_ports=dpc-native" parameter to allow native use of DPC
     even if platform didn't grant control over AER (Olof Johansson)

  Hotplug:

   - Avoid returning prematurely from sysfs requests to enable or
     disable a PCIe hotplug slot (Lukas Wunner)

   - Don't disable interrupts twice when suspending hotplug ports (Mika
     Westerberg)

   - Fix deadlocks when PCIe ports are hot-removed while suspended (Mika
     Westerberg)

  Power management:

   - Remove unnecessary ASPM locking (Bjorn Helgaas)

   - Add support for disabling L1 PM Substates (Heiner Kallweit)

   - Allow re-enabling Clock PM after it has been disabled (Heiner
     Kallweit)

   - Add sysfs attributes for controlling ASPM link states (Heiner
     Kallweit)

   - Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl"
     sysfs files (Heiner Kallweit)

   - Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on
     USB 2.0 or 1.1 connect events (Kai-Heng Feng)

   - Move power state check out of pci_msi_supported() (Bjorn Helgaas)

   - Fix incorrect MSI-X masking on resume and revert related nvme quirk
     for Kingston NVME SSD running FW E8FK11.T (Jian-Hong Pan)

   - Always return devices to D0 when thawing to fix hibernation with
     drivers like mlx4 that used legacy power management (previously we
     only did it for drivers with new power management ops) (Dexuan Cui)

   - Clear PCIe PME Status even for legacy power management (Bjorn
     Helgaas)

   - Fix PCI PM documentation errors (Bjorn Helgaas)

   - Use dev_printk() for more power management messages (Bjorn Helgaas)

   - Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas)

   - Convert xen-platform from legacy to generic power management (Bjorn
     Helgaas)

   - Removed unused .resume_early() and .suspend_late() legacy power
     management hooks (Bjorn Helgaas)

   - Rearrange power management code for clarity (Rafael J. Wysocki)

   - Decode power states more clearly ("4" or "D4" really refers to
     "D3cold") (Bjorn Helgaas)

   - Notice when reading PM Control register returns an error (~0)
     instead of interpreting it as being in D3hot (Bjorn Helgaas)

   - Add missing link delays required by the PCIe spec (Mika Westerberg)

  Virtualization:

   - Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn
     Helgaas)

   - Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code
     previously didn't recognize that) (Kuppuswamy Sathyanarayanan)

   - Allow VFs to use PASID (the PF PASID capability is shared by the
     VFs, but the code previously didn't recognize that) (Kuppuswamy
     Sathyanarayanan)

   - Disconnect PF and VF ATS enablement, since ATS in PFs and
     associated VFs can be enabled independently (Kuppuswamy
     Sathyanarayanan)

   - Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan)

   - Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas)

   - Consolidate ATS declarations in linux/pci-ats.h (Krzysztof
     Wilczynski)

   - Remove unused PRI and PASID stubs (Bjorn Helgaas)

   - Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID
     interfaces that are only used by built-in IOMMU drivers (Bjorn
     Helgaas)

   - Hide PRI and PASID state restoration functions used only inside the
     PCI core (Bjorn Helgaas)

   - Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski)

   - Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut)

   - Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George
     Cherian)

   - Fix the UPDCR register address in the Intel ACS quirk (Steffen
     Liebergeld)

   - Unify ACS quirk implementations (Bjorn Helgaas)

  Amlogic Meson host bridge driver:

   - Fix meson PERST# GPIO polarity problem (Remi Pommarel)

   - Add DT bindings for Amlogic Meson G12A (Neil Armstrong)

   - Fix meson clock names to match DT bindings (Neil Armstrong)

   - Add meson support for Amlogic G12A SoC with separate shared PHY
     (Neil Armstrong)

   - Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe
     combo PHY (Neil Armstrong)

   - Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong)

   - Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT
     (Neil Armstrong)

  Broadcom iProc host bridge driver:

   - Invalidate iProc PAXB address mapping before programming it
     (Abhishek Shah)

   - Fix iproc-msi and mvebu __iomem annotations (Ben Dooks)

  Cadence host bridge driver:

   - Refactor Cadence PCIe host controller to use as a library for both
     host and endpoint (Tom Joseph)

  Freescale Layerscape host bridge driver:

   - Add layerscape LS1028a support (Xiaowei Bao)

  Intel VMD host bridge driver:

   - Add VMD bus 224-255 restriction decode (Jon Derrick)

   - Add VMD 8086:9A0B device ID (Jon Derrick)

   - Remove Keith from VMD maintainer list (Keith Busch)

  Marvell ARMADA 3700 / Aardvark host bridge driver:

   - Use LTSSM state to build link training flag since Aardvark doesn't
     implement the Link Training bit (Remi Pommarel)

   - Delay before training Aardvark link in case PERST# was asserted
     before the driver probe (Remi Pommarel)

   - Fix Aardvark issues with Root Control reads and writes (Remi
     Pommarel)

   - Don't rely on jiffies in Aardvark config access path since
     interrupts may be disabled (Remi Pommarel)

   - Fix Aardvark big-endian support (Grzegorz Jaszczyk)

  Marvell ARMADA 370 / XP host bridge driver:

   - Make mvebu_pci_bridge_emul_ops static (Ben Dooks)

  Microsoft Hyper-V host bridge driver:

   - Add hibernation support for Hyper-V virtual PCI devices (Dexuan
     Cui)

   - Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan
     Cui)

   - Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui)

  Mobiveil host bridge driver:

   - Change mobiveil csr_read()/write() function names that conflict
     with riscv arch functions (Kefeng Wang)

  NVIDIA Tegra host bridge driver:

   - Fix Tegra CLKREQ dependency programming (Vidya Sagar)

  Renesas R-Car host bridge driver:

   - Remove unnecessary header include from rcar (Andrew Murray)

   - Tighten register index checking for rcar inbound range programming
     (Marek Vasut)

   - Fix rcar inbound range alignment calculation to improve packing of
     multiple entries (Marek Vasut)

   - Update rcar MACCTLR setting to match documentation (Yoshihiro
     Shimoda)

   - Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual
     (Yoshihiro Shimoda)

   - Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon
     Horman)

  Rockchip host bridge driver:

   - Make rockchip 0V9 and 1V8 power regulators non-optional (Robin
     Murphy)

  Socionext UniPhier host bridge driver:

   - Set uniphier to host (RC) mode always (Kunihiko Hayashi)

  Endpoint drivers:

   - Fix endpoint driver sign extension problem when shifting page
     number to phys_addr_t (Alan Mikhak)

  Misc:

   - Add NumaChip SPDX header (Krzysztof Wilczynski)

   - Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski)

   - Remove unused includes (Krzysztof Wilczynski)

   - Removed unused sysfs attribute groups (Ben Dooks)

   - Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas)

   - Add PCIe Link Control 2 register field definitions to replace magic
     numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas)

   - Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and
     Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas)

   - Use pcie_capability_read_word() instead of pci_read_config_word()
     in AMDGPU and Radeon CIK/SI (Frederick Lawler)

   - Remove unused pci_irq_get_node() Greg Kroah-Hartman)

   - Make asm/msi.h mandatory and simplify PCI_MSI_IRQ_DOMAIN Kconfig
     (Palmer Dabbelt, Michal Simek)

   - Read all 64 bits of Switchtec part_event_bitmap (Logan Gunthorpe)

   - Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn
     Helgaas)

   - Fix bridge emulation big-endian support (Grzegorz Jaszczyk)

   - Fix dwc find_next_bit() usage (Niklas Cassel)

   - Fix pcitest.c fd leak (Hewenliang)

   - Fix typos and comments (Bjorn Helgaas)

   - Fix Kconfig whitespace errors (Krzysztof Kozlowski)"

* tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (160 commits)
  PCI: Remove PCI_MSI_IRQ_DOMAIN architecture whitelist
  asm-generic: Make msi.h a mandatory include/asm header
  Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T"
  PCI/MSI: Fix incorrect MSI-X masking on resume
  PCI/MSI: Move power state check out of pci_msi_supported()
  PCI/MSI: Remove unused pci_irq_get_node()
  PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer
  PCI: hv: Change pci_protocol_version to per-hbus
  PCI: hv: Add hibernation support
  PCI: hv: Reorganize the code in preparation of hibernation
  MAINTAINERS: Remove Keith from VMD maintainer
  PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code
  PCI/ASPM: Add sysfs attributes for controlling ASPM link states
  PCI: Fix indentation
  drm/radeon: Prefer pcie_capability_read_word()
  drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions
  drm/radeon: Correct Transmit Margin masks
  drm/amdgpu: Prefer pcie_capability_read_word()
  PCI: uniphier: Set mode register to host mode
  drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions
  ...
 2019-12-03 13:58:22 -08:00
Linus Torvalds
937d6eefc7 Here's the main documentation changes for 5.5: 
- Various kerneldoc script enhancements.
 
  - More RST conversions; those are slowing down as we run out of things to
    convert, but we're a ways from done still.
 
  - Dan's "maintainer profile entry" work landed at last.  Now we just need
    to get maintainers to fill in the profiles...
 
  - A reworking of the parallel build setup to work better with a variety of
    systems (and to not take over huge systems entirely in particular).
 
  - The MAINTAINERS file is now converted to RST during the build.
    Hopefully nobody ever tries to print this thing, or they will need to
    load a lot of paper.
 
  - A script and documentation making it easy for maintainers to add Link:
    tags at commit time.
 
 Also included is the removal of a bunch of spurious CR characters.
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl3j5B0PHGNvcmJldEBs
 d24ubmV0AAoJEBdDWhNsDH5YtBcH/jIN2cO8/0YW2rjVT+1G6ytSdFUKx5WJ/lpf
 5uBeCvuCeYhtCB6+BgnXvjykJ7jDW11/NJNjWqz/gsvD5l5FJK1rXarI/oz2Klyi
 kcPtDmBF/ki4wz9qXzEpa0vg8LXdjeys50S1vE75qCzxZoPP7YjuRbPnLrlIJukv
 JbDVi4p9kxgeHfRB4+BHOe5rFwA3mMmaxKNIX34Y+UUO2KZ0g/yUi1bAaQwQAdt+
 PsORmkVQ8Puh3K9xRIr7dYlcWBlBiPqzYdvDgTVxSjrxdK6wjYjSgVk2VjC5MBUN
 mTSTWgyfsIcD/76/s8tq7ZRl2fw+SkCSkFo79Rb/hJwDTb7Vnng=
 =LPBr
 -----END PGP SIGNATURE-----

Merge tag 'docs-5.5a' of git://git.lwn.net/linux

Pull Documentation updates from Jonathan Corbet:
 "Here are the main documentation changes for 5.5:

   - Various kerneldoc script enhancements.

   - More RST conversions; those are slowing down as we run out of
     things to convert, but we're a ways from done still.

   - Dan's "maintainer profile entry" work landed at last. Now we just
     need to get maintainers to fill in the profiles...

   - A reworking of the parallel build setup to work better with a
     variety of systems (and to not take over huge systems entirely in
     particular).

   - The MAINTAINERS file is now converted to RST during the build.
     Hopefully nobody ever tries to print this thing, or they will need
     to load a lot of paper.

   - A script and documentation making it easy for maintainers to add
     Link: tags at commit time.

  Also included is the removal of a bunch of spurious CR characters"

* tag 'docs-5.5a' of git://git.lwn.net/linux: (91 commits)
  docs: remove a bunch of stray CRs
  docs: fix up the maintainer profile document
  libnvdimm, MAINTAINERS: Maintainer Entry Profile
  Maintainer Handbook: Maintainer Entry Profile
  MAINTAINERS: Reclaim the P: tag for Maintainer Entry Profile
  docs, parallelism: Rearrange how jobserver reservations are made
  docs, parallelism: Do not leak blocking mode to other readers
  docs, parallelism: Fix failure path and add comment
  Documentation: Remove bootmem_debug from kernel-parameters.txt
  Documentation: security: core.rst: fix warnings
  Documentation/process/howto/kokr: Update for 4.x -> 5.x versioning
  Documentation/translation: Use Korean for Korean translation title
  docs/memory-barriers.txt: Remove remaining references to mmiowb()
  docs/memory-barriers.txt/kokr: Update I/O section to be clearer about CPU vs thread
  docs/memory-barriers.txt/kokr: Fix style, spacing and grammar in I/O section
  Documentation/kokr: Kill all references to mmiowb()
  docs/memory-barriers.txt/kokr: Rewrite "KERNEL I/O BARRIER EFFECTS" section
  docs: Add initial documentation for devfreq
  Documentation: Document how to get links with git am
  docs: Add request_irq() documentation
  ...
 2019-12-02 11:51:02 -08:00
Linus Torvalds
67b8ed29e0 platform-drivers-x86 for v5.5-1 
* New bootctl driver for Mellanox BlueField SoC.
 
 * New driver to support System76 laptops.
 
 * Temperature monitoring and fan control on Acer Aspire 7551
   is now supported.
 
 * Previously the Huawei driver handled only hotkeys.
   After the conversion to WMI it has been expanded
   to support newer laptop models.
 
 * Big refactoring of intel-speed-select tools allows to
   use it on Intel CascadeLake-N systems.
 
 * Touchscreen support for ezpad 6 m4 and
   Schneider SCT101CTM tablets
 
 * Miscellaneous clean ups and fixes here and there.
 
 The following is an automated git shortlog grouped by driver:
 
 acerhdf:
  -  Add support for Acer Aspire 7551
  -  Rename Peter Feuerer to Peter Kaestle
 
 Add System76 ACPI driver:
  - Add System76 ACPI driver
 
 asus-laptop:
  -  switch to using polled mode of input devices
 
 classmate-laptop:
  -  remove unused variable
 
 dell-laptop:
  -  disable kbd backlight on Inspiron 10xx
 
 hdaps:
  -  switch to using polled mode of input devices
 
 hp-wmi:
  -  Fix ACPI errors caused by passing 0 as input size
  -  Fix ACPI errors caused by too small buffer
 
 huawei-wmi:
  -  Remove unnecessary battery mutex
  -  No need to check for battery name
  -  Stricter battery thresholds set
  -  Fix a precision vs width printf bug
  -  Avoid use of global variable when possible
  -  No need to keep pointer to platform device
  -  Don't leak memory on the exit
  -  huawei_wmi can be static
  -  Add debugfs support
  -  Add fn-lock support
  -  Add battery charging thresholds
  -  Implement huawei wmi management
  -  Add quirks and module parameters
  -  Move to platform driver
 
 i2c-multi-instantiate:
  -  Fail the probe if no IRQ provided
 
 intel_cht_int33fe:
  -  Split code to Micro-B and Type-C
 
 intel_int0002_vgpio:
  -  Pass irqchip when adding gpiochip
 
 intel_pmc_core:
  -  Add Comet Lake (CML) platform support to intel_pmc_core driver
  -  Fix the SoC naming inconsistency
 
 intel_punit_ipc:
  -  Drop useless label
  -  use devm_platform_ioremap_resource() to simplify code
  -  Avoid error message when retrieving IRQ
 
 peaq-wmi:
  -  switch to using polled mode of input devices
 
 platform/mellanox:
  -  Fix Kconfig indentation
  -  Add bootctl driver for Mellanox BlueField Soc
 
 tools/power/x86/intel-speed-select:
  -  Display TRL buckets for just base config level
  -  Ignore missing config level
  -  Increment version
  -  Use core count for base-freq mask
  -  Support platform with limited Intel(R) Speed Select
  -  Use Frequency weight for CLOS
  -  Make CLOS frequency in MHz
  -  Use mailbox for CLOS_PM_QOS_CONFIG
  -  Auto mode for CLX
  -  Correct CLX-N frequency units
  -  Change display of "avx" to "avx2"
  -  Extend command set for perf-profile
  -  Implement base-freq commands on CascadeLake-N
  -  Implement 'perf-profile info' on CascadeLake-N
  -  Implement CascadeLake-N help and command functions structures
  -  Add check for CascadeLake-N models
  -  Make process_command generic
  -  Add int argument to command functions
  -  Refuse to disable core-power when getting used
  -  Turbo-freq feature auto mode
  -  Base-freq feature auto mode
  -  Remove warning for unused result
 
 toshiba_acpi:
  -  do not select INPUT_POLLDEV
 
 touchscreen_dmi:
  -  Add info for the ezpad 6 m4 tablet
  -  Add touchscreen platform data for the Schneider SCT101CTM tablet
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEqaflIX74DDDzMJJtb7wzTHR8rCgFAl3f20sACgkQb7wzTHR8
 rChciA//cvV45JxTLdbadW55L3nCDqa0poqCVqoCWOl3HvpEYw0uDakzD7AaxayL
 E4Vow+5puH2O0qqhkJSY3ZXMzKVB+h7lbe/97HfBOKJbXENgI9uVSX7TRcJJ1Bfj
 lelcA2GYtEm2Ig+YhsPCVVGU1NEF7+qvtDFR8WCExVfz7KLAQFQpm3bKqsOzBE4/
 atMjZmdU3gFW8e6AVyGP28N8lSGKZeY5i9mGv/tRG2aRS6y1gZjRPFi81awk/Ptb
 ujl+KmyQX/h31hU9Nxr1jEaAVjSEKyie9lLMKobmZldfzrpqE8sA3xe6BCfZfrdL
 WV4Db/92KI78LJljdoUlTg4JNZMn+Mi/N7jgs7ufbaXP9z7nrICZ6DKSYGW4MPXg
 j6A7iejXCohhUwvEtK0Zk0FlVhUreh5JHFyDKFlVR/A0sG0o9KrzyqUcmsySLIqX
 0p9abBFBgzplyUm8unryg1gKIrH1Mw0/41qzsJ8Tt7TPQBY6EKNtc28TGKtdIihe
 QNArtJwOorE5V7Hlp0Kbvn7cOeMa/w+gyQ7Fm4i2m8EpXICukYDCER85hnhc+JLs
 hGxIrdEZlN6jYhbMzQ7ue7m19wsbVgiB4zjy9tCRQUwg+/Y5QtKQ3nLWXrP22cR2
 Kw0BsE0hByzJ5hFJl/RLo3G0vBDYdh5s+lNVGDatkj0Y6b9dqSw=
 =KkPQ
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v5.5-1' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform driver updates from Andy Shevchenko:

 - New bootctl driver for Mellanox BlueField SoC.

 - New driver to support System76 laptops.

 - Temperature monitoring and fan control on Acer Aspire 7551 is now
   supported.

 - Previously the Huawei driver handled only hotkeys. After the
   conversion to WMI it has been expanded to support newer laptop
   models.

 - Big refactoring of intel-speed-select tools allows to use it on Intel
   CascadeLake-N systems.

 - Touchscreen support for ezpad 6 m4 and Schneider SCT101CTM tablets

 - Miscellaneous clean ups and fixes here and there.

* tag 'platform-drivers-x86-v5.5-1' of git://git.infradead.org/linux-platform-drivers-x86: (59 commits)
  platform/x86: hp-wmi: Fix ACPI errors caused by passing 0 as input size
  platform/x86: hp-wmi: Fix ACPI errors caused by too small buffer
  platform/x86: intel_pmc_core: Add Comet Lake (CML) platform support to intel_pmc_core driver
  platform/x86: intel_pmc_core: Fix the SoC naming inconsistency
  platform/mellanox: Fix Kconfig indentation
  tools/power/x86/intel-speed-select: Display TRL buckets for just base config level
  tools/power/x86/intel-speed-select: Ignore missing config level
  platform/x86: touchscreen_dmi: Add info for the ezpad 6 m4 tablet
  tools/power/x86/intel-speed-select: Increment version
  tools/power/x86/intel-speed-select: Use core count for base-freq mask
  tools/power/x86/intel-speed-select: Support platform with limited Intel(R) Speed Select
  tools/power/x86/intel-speed-select: Use Frequency weight for CLOS
  tools/power/x86/intel-speed-select: Make CLOS frequency in MHz
  tools/power/x86/intel-speed-select: Use mailbox for CLOS_PM_QOS_CONFIG
  tools/power/x86/intel-speed-select: Auto mode for CLX
  tools/power/x86/intel-speed-select: Correct CLX-N frequency units
  tools/power/x86/intel-speed-select: Change display of "avx" to "avx2"
  tools/power/x86/intel-speed-select: Extend command set for perf-profile
  Add touchscreen platform data for the Schneider SCT101CTM tablet
  platform/x86: intel_int0002_vgpio: Pass irqchip when adding gpiochip
  ...
 2019-12-01 18:24:25 -08:00
Linus Torvalds
4a08fe5792 linux-watchdog 5.5-rc1 tag 
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iEYEABECAAYFAl3hODMACgkQ+iyteGJfRsoyYgCcDMibAAvqUQ2OqbEAwPMp5E5z
 4GgAnRU4PolSaZjAP1lvqeqjM8biwbRg
 =Z1pz
 -----END PGP SIGNATURE-----

Merge tag 'linux-watchdog-5.5-rc1' of git://www.linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:

 - support for NCT6116D

 - several small fixes and improvements

* tag 'linux-watchdog-5.5-rc1' of git://www.linux-watchdog.org/linux-watchdog: (24 commits)
  watchdog: jz4740: Drop dependency on MACH_JZ47xx
  watchdog: jz4740: Use regmap provided by TCU driver
  watchdog: jz4740: Use WDT clock provided by TCU driver
  dt-bindings: watchdog: sama5d4_wdt: add microchip,sam9x60-wdt compatible
  watchdog: sama5d4_wdt: cleanup the bit definitions
  watchdog: sprd: Fix the incorrect pointer getting from driver data
  watchdog: aspeed: Fix clock behaviour for ast2600
  watchdog: imx7ulp: Fix reboot hang
  watchdog: make nowayout sysfs file writable
  watchdog: prevent deferral of watchdogd wakeup on RT
  watchdog: imx7ulp: Use definitions instead of magic values
  watchdog: imx7ulp: Remove inline annotations
  watchdog: imx7ulp: Remove unused structure member
  watchdog: imx7ulp: Pass the wdog instance inimx7ulp_wdt_enable()
  watchdog: wdat_wdt: Spelling s/configrable/configurable/
  watchdog: bd70528: Trivial function documentation fix
  watchdog: cadence: Do not show error in case of deferred probe
  watchdog: Fix the race between the release of watchdog_core_data and cdev
  watchdog: sbc7240_wdt: Fix yet another -Wimplicit-fallthrough warning
  watchdog: intel-mid_wdt: Add WATCHDOG_NOWAYOUT support
  ...
 2019-12-01 18:01:03 -08:00
Linus Torvalds
304220b56e Merge tag 'leds-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds 
Pull LED updates from Pavel Machek:
 "This contains usual small updates to drivers, and removal of PAGE_SIZE
  limits on /sys/class/leds/<led>/trigger.

  We should not be really having that many triggers; but with cpu
  activity triggers we do, and we'll eventually need to fix it, but...
  remove the limit for now"

* tag 'leds-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: (26 commits)
  leds: trigger: netdev: fix handling on interface rename
  leds: an30259a: add a check for devm_regmap_init_i2c
  leds: mlxreg: Fix possible buffer overflow
  leds: pca953x: Use of_device_get_match_data()
  leds: core: Fix leds.h structure documentation
  leds: core: Fix devm_classdev_match to reference correct structure
  leds: core: Remove extern from header
  leds: lm3601x: Convert class registration to device managed
  leds: flash: Add devm_* functions to the flash class
  leds: flash: Remove extern from the header file
  leds: flash: Convert non extended registration to inline
  leds: Kconfig: Be consistent with the usage of "LED"
  leds: remove PAGE_SIZE limit of /sys/class/leds/<led>/trigger
  leds: tlc591xx: update the maximum brightness
  leds: lm3692x: Use flags from LM3692X_BRT_CTRL
  leds: lm3692x: Use flags from LM3692X_BOOST_CTRL
  leds: lm3692x: Handle failure to probe the regulator
  leds: lm3692x: Don't overwrite return value in error path
  leds: lm3692x: Print error value on dev_err
  leds: tlc591xx: use devm_led_classdev_register_ext()
  ...
 2019-12-01 16:09:28 -08:00
Linus Torvalds
0dd0c8f7db - Support for new VMBus protocols (Andrea Parri). 
- Hibernation support (Dexuan Cui).
 - Latency testing framework (Branden Bonaby).
 - Decoupling Hyper-V page size from guest page size (Himadri Pandya).
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE4n5dijQDou9mhzu83qZv95d3LNwFAl3f5YIACgkQ3qZv95d3
 LNzBww/8Cpv/BnOs2cp56OhC+2++3YlWfmxGnvQb9h52weElgr1AZF33lAynp8BZ
 YssOcDnS/G2iAkNDffbQA7s3WTwIjP1weJibOeKbtcXp4SuhNR3gnJafufNddNDv
 bw8ZReLQV7hy3sHb3OUx0aJk5Mssp0N9ZpxRilyIpLELPfVp63gFebq6s1MQYljk
 BAiNO4SKqsGQGZApt2F4Cc3hX2wU2ZfiDm6SifXiLYITGnvilIn7XFIht+2jJBWS
 CdzRoGXcwhQhlj68XWlc89SOzJb7vVUMO1sr84psfbQ2LbhJU8lfJKRJ4b4lR07Z
 Uv5FYxjr14S65fv7DkzCfWU+uPN/sObG4pPXihlfqcTraOvYLQ6/x8cw+9tGZg4H
 aTtnF40hnO81aKsvPAeIsSzVkoyPaSrt7KKhk+Bw/5EUDTTNp6EbIuL4xwnKt6Rt
 2UpA5HM9guQqNb6OZrjlpZfJgd9bNP4CZLBTfOukmnZpONKr2Wv3wubcwQJ8ibQc
 1WZ5SfN2Wmg999Ski7j9qzHk0tWJxa6SX+2NLEHRKxy2nJSJ1zlAr//bznMyMgH/
 yKPDaSkOFoy0aqiTKV2WzuOY6FGXTrSo5vq8YAgYRgp3xB+5+7zLeqlj3ipXhLYE
 HH/eqB27eSnvi0jpub4TbszGJG0o4Z1aYx3aHYYqrOfWX/A5Vls=
 =oJGE
 -----END PGP SIGNATURE-----

Merge tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull Hyper-V updates from Sasha Levin:

 - support for new VMBus protocols (Andrea Parri)

 - hibernation support (Dexuan Cui)

 - latency testing framework (Branden Bonaby)

 - decoupling Hyper-V page size from guest page size (Himadri Pandya)

* tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (22 commits)
  Drivers: hv: vmbus: Fix crash handler reset of Hyper-V synic
  drivers/hv: Replace binary semaphore with mutex
  drivers: iommu: hyperv: Make HYPERV_IOMMU only available on x86
  HID: hyperv: Add the support of hibernation
  hv_balloon: Add the support of hibernation
  x86/hyperv: Implement hv_is_hibernation_supported()
  Drivers: hv: balloon: Remove dependencies on guest page size
  Drivers: hv: vmbus: Remove dependencies on guest page size
  x86: hv: Add function to allocate zeroed page for Hyper-V
  Drivers: hv: util: Specify ring buffer size using Hyper-V page size
  Drivers: hv: Specify receive buffer size using Hyper-V page size
  tools: hv: add vmbus testing tool
  drivers: hv: vmbus: Introduce latency testing
  video: hyperv: hyperv_fb: Support deferred IO for Hyper-V frame buffer driver
  video: hyperv: hyperv_fb: Obtain screen resolution from Hyper-V host
  hv_netvsc: Add the support of hibernation
  hv_sock: Add the support of hibernation
  video: hyperv_fb: Add the support of hibernation
  scsi: storvsc: Add the support of hibernation
  Drivers: hv: vmbus: Add module parameter to cap the VMBus version
  ...
 2019-11-30 14:50:51 -08:00
Linus Torvalds
7794b1d418 powerpc updates for 5.5 
Highlights:
 
  - Infrastructure for secure boot on some bare metal Power9 machines. The
    firmware support is still in development, so the code here won't actually
    activate secure boot on any existing systems.
 
  - A change to xmon (our crash handler / pseudo-debugger) to restrict it to
    read-only mode when the kernel is lockdown'ed, otherwise it's trivial to drop
    into xmon and modify kernel data, such as the lockdown state.
 
  - Support for KASLR on 32-bit BookE machines (Freescale / NXP).
 
  - Fixes for our flush_icache_range() and __kernel_sync_dicache() (VDSO) to work
    with memory ranges >4GB.
 
  - Some reworks of the pseries CMM (Cooperative Memory Management) driver to
    make it behave more like other balloon drivers and enable some cleanups of
    generic mm code.
 
  - A series of fixes to our hardware breakpoint support to properly handle
    unaligned watchpoint addresses.
 
 Plus a bunch of other smaller improvements, fixes and cleanups.
 
 Thanks to:
   Alastair D'Silva, Andrew Donnellan, Aneesh Kumar K.V, Anthony Steinhauser,
   Cédric Le Goater, Chris Packham, Chris Smart, Christophe Leroy, Christopher M.
   Riedl, Christoph Hellwig, Claudio Carvalho, Daniel Axtens, David Hildenbrand,
   Deb McLemore, Diana Craciun, Eric Richter, Geert Uytterhoeven, Greg
   Kroah-Hartman, Greg Kurz, Gustavo L. F. Walbon, Hari Bathini, Harish, Jason
   Yan, Krzysztof Kozlowski, Leonardo Bras, Mathieu Malaterre, Mauro S. M.
   Rodrigues, Michal Suchanek, Mimi Zohar, Nathan Chancellor, Nathan Lynch, Nayna
   Jain, Nick Desaulniers, Oliver O'Halloran, Qian Cai, Rasmus Villemoes, Ravi
   Bangoria, Sam Bobroff, Santosh Sivaraj, Scott Wood, Thomas Huth, Tyrel
   Datwyler, Vaibhav Jain, Valentin Longchamp, YueHaibing.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl3hBycTHG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgApBEACk91MEQDYJ9MF9I6uN+85qb5p4pMsp
 rGzqnpt+XFidbDAc3eP63pYfIDSo3jtkQ2YL7shAnDOTvkO0md+Vqkl9Aq/G6FIf
 lDBlwbgkXMSxS/O2Lpvfn4NZAoK6dKmiV55LSgfliM62X3e2Saeg6TR55wBTgJ6/
 SlYPDwZfcVHOAiFS3UmfB+hkiIZk+AI5Zr5VAZvT2ZmeH36yAWkq4JgJI1uAk6m1
 /7iCnlfUjx/nl/BhnA3kjjmAgGCJ5s/WuVgwFMz47XpMBWGBhLWpMh/NqDTFb8ca
 kpiVQoVPQe2xyO3pL/kOwBy6sii26ftfHDhLKMy1hJdEhVQzS5LerPIMeh1qsU8Q
 hV/Cj+jfsrS/vBDOehj3jwx93t+861PmTOqgLnpYQ6Ltrt+2B/74+fufGMHE1kI3
 Ffo7xvNw4sw6bSziDxDFqUx2P1dFN5D5EJsJsYM98ekkVAAkzNqCDRvfD2QI8Pif
 VXWPYXqtNJTrVPJA0D7Yfo9FDNwhANd0f1zi7r/U5mVXBFUyKOlGqTQSkXgMrVeK
 3I7wHPOVGgdA5UUkfcd3pcuqsY081U9E//o5PUfj8ybO5JCwly8NoatbG+xHmKia
 a72uJT8MjCo9mGCHKDrwi9l/kqms6ZSv8RP+yMhGuB52YoiGc6PpVyab5jXIUd1N
 yTtBlC0YGW1JYw==
 =JHzg
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Highlights:

   - Infrastructure for secure boot on some bare metal Power9 machines.
     The firmware support is still in development, so the code here
     won't actually activate secure boot on any existing systems.

   - A change to xmon (our crash handler / pseudo-debugger) to restrict
     it to read-only mode when the kernel is lockdown'ed, otherwise it's
     trivial to drop into xmon and modify kernel data, such as the
     lockdown state.

   - Support for KASLR on 32-bit BookE machines (Freescale / NXP).

   - Fixes for our flush_icache_range() and __kernel_sync_dicache()
     (VDSO) to work with memory ranges >4GB.

   - Some reworks of the pseries CMM (Cooperative Memory Management)
     driver to make it behave more like other balloon drivers and enable
     some cleanups of generic mm code.

   - A series of fixes to our hardware breakpoint support to properly
     handle unaligned watchpoint addresses.

  Plus a bunch of other smaller improvements, fixes and cleanups.

  Thanks to: Alastair D'Silva, Andrew Donnellan, Aneesh Kumar K.V,
  Anthony Steinhauser, Cédric Le Goater, Chris Packham, Chris Smart,
  Christophe Leroy, Christopher M. Riedl, Christoph Hellwig, Claudio
  Carvalho, Daniel Axtens, David Hildenbrand, Deb McLemore, Diana
  Craciun, Eric Richter, Geert Uytterhoeven, Greg Kroah-Hartman, Greg
  Kurz, Gustavo L. F. Walbon, Hari Bathini, Harish, Jason Yan, Krzysztof
  Kozlowski, Leonardo Bras, Mathieu Malaterre, Mauro S. M. Rodrigues,
  Michal Suchanek, Mimi Zohar, Nathan Chancellor, Nathan Lynch, Nayna
  Jain, Nick Desaulniers, Oliver O'Halloran, Qian Cai, Rasmus Villemoes,
  Ravi Bangoria, Sam Bobroff, Santosh Sivaraj, Scott Wood, Thomas Huth,
  Tyrel Datwyler, Vaibhav Jain, Valentin Longchamp, YueHaibing"

* tag 'powerpc-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (144 commits)
  powerpc/fixmap: fix crash with HIGHMEM
  x86/efi: remove unused variables
  powerpc: Define arch_is_kernel_initmem_freed() for lockdep
  powerpc/prom_init: Use -ffreestanding to avoid a reference to bcmp
  powerpc: Avoid clang warnings around setjmp and longjmp
  powerpc: Don't add -mabi= flags when building with Clang
  powerpc: Fix Kconfig indentation
  powerpc/fixmap: don't clear fixmap area in paging_init()
  selftests/powerpc: spectre_v2 test must be built 64-bit
  powerpc/powernv: Disable native PCIe port management
  powerpc/kexec: Move kexec files into a dedicated subdir.
  powerpc/32: Split kexec low level code out of misc_32.S
  powerpc/sysdev: drop simple gpio
  powerpc/83xx: map IMMR with a BAT.
  powerpc/32s: automatically allocate BAT in setbat()
  powerpc/ioremap: warn on early use of ioremap()
  powerpc: Add support for GENERIC_EARLY_IOREMAP
  powerpc/fixmap: Use __fix_to_virt() instead of fix_to_virt()
  powerpc/8xx: use the fixmapped IMMR in cpm_reset()
  powerpc/8xx: add __init to cpm1 init functions
  ...
 2019-11-30 14:35:43 -08:00
Linus Torvalds
8f45533e9d f2fs-for-5.5-rc1 
In this round, we've introduced fairly small number of patches as below.
 
 Enhancement:
  - improve the in-place-update IO flow
  - allocate segment to guarantee no GC for pinned files
 
 Bug fix:
  - fix updatetime in lazytime mode
  - potential memory leak in f2fs_listxattr
  - record parent inode number in rename2 correctly
  - fix deadlock in f2fs_gc along with atomic writes
  - avoid needless data migration in GC
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE00UqedjCtOrGVvQiQBSofoJIUNIFAl3e1XkACgkQQBSofoJI
 UNJ0GhAAhVIX4J91CLnVSh0ik1XCaI6h/dFeS6kbDd8oxzQm/qt64b59aZqgy7Rk
 iblGWfj8uPP5yO60pqb5uN4a0hybptVZSEldbhF0Xv0zUeVoT7C1ksTMrdUd1p7d
 YkO8G+V4QBBrtpKG1KKKEncrvcdx4n9QHxGsRh4z5vXZH7sEmH7+N8OE88MaPjdZ
 UWqYk0S0GoZBhPe7c8pQuD/PM+WJJH4Lewgw5kK21eAjOKI+yZKb+bY2tGjo5dA1
 nzYO72CRMV4VEKsnxTZ/LCB2kCXeexaGuiVPyHjCmgAh990cLjsCWIbJ8EJu7uAa
 vAo6/EMfgfPkPt5Y7uWGR4EeNT7AFhUoMuoQ9zdXzecY48D4Gz58o87Q+OFY3ipZ
 W2OSf92pEJyfumE5o8wN435gaRYUjjCo1SMoIQABNav411XrBVoRwjvkV3DyA6af
 Bs1bafz2hR/E1q0uoZvLWC5waiHy9605OkKMs/y8IRsn6yhRep/tv3KLk2Dz3fOO
 LxenhuVO9bQDCheEcH15qIljxTuyfTyUOa9UrFXOwn4mK61J8A/Gs+SiqW0y28oA
 feSw7cLPxK0OlYQgql24JfJN/Xt523WmCSfXfe7TCUDTDkBpmsdhFwHYZyCLzqt+
 FyBhf2DF/BGzKMT28oc7StO43mIvOc1Wk+jfJFW+hld5ncAJxCE=
 =qyrd
 -----END PGP SIGNATURE-----

Merge tag 'f2fs-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs

Pull f2fs updates from Jaegeuk Kim:
 "In this round, we've introduced fairly small number of patches as below.

  Enhancements:
   - improve the in-place-update IO flow
   - allocate segment to guarantee no GC for pinned files

  Bug fixes:
   - fix updatetime in lazytime mode
   - potential memory leak in f2fs_listxattr
   - record parent inode number in rename2 correctly
   - fix deadlock in f2fs_gc along with atomic writes
   - avoid needless data migration in GC"

* tag 'f2fs-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
  f2fs: stop GC when the victim becomes fully valid
  f2fs: expose main_blkaddr in sysfs
  f2fs: choose hardlimit when softlimit is larger than hardlimit in f2fs_statfs_project()
  f2fs: Fix deadlock in f2fs_gc() context during atomic files handling
  f2fs: show f2fs instance in printk_ratelimited
  f2fs: fix potential overflow
  f2fs: fix to update dir's i_pino during cross_rename
  f2fs: support aligned pinned file
  f2fs: avoid kernel panic on corruption test
  f2fs: fix wrong description in document
  f2fs: cache global IPU bio
  f2fs: fix to avoid memory leakage in f2fs_listxattr
  f2fs: check total_segments from devices in raw_super
  f2fs: update multi-dev metadata in resize_fs
  f2fs: mark recovery flag correctly in read_raw_super_block()
  f2fs: fix to update time in lazytime mode
 2019-11-30 11:02:30 -08:00
Linus Torvalds
0dd09bc02c Staging / IIO patches for 5.5-rc1 
Here is the big staging and iio set of patches for the 5.5-rc1 release.
 
 It's the usual huge collection of cleanup patches all over the
 drivers/staging/ area, along with a new staging driver, and a bunch of
 new IIO drivers as well.
 
 Full details are in the shortlog, but all of these have been in
 linux-next for a long time with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXd6lVQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ylFnwCgyvZ62uUyQTRey0zvNTe3I4fY9L4AnAnrz3ZC
 U6ZA2+Uj3O6qhAr5frRu
 =uv8S
 -----END PGP SIGNATURE-----

Merge tag 'staging-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging / iio updates from Greg KH:
 "Here is the big staging and iio set of patches for the 5.5-rc1
  release.

  It's the usual huge collection of cleanup patches all over the
  drivers/staging/ area, along with a new staging driver, and a bunch of
  new IIO drivers as well.

  Full details are in the shortlog, but all of these have been in
  linux-next for a long time with no reported issues"

* tag 'staging-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (548 commits)
  staging: vchiq: Have vchiq_dump_* functions return an error code
  staging: vchiq: Refactor indentation in vchiq_dump_* functions
  staging: fwserial: Fix Kconfig indentation (seven spaces)
  staging: vchiq_dump: Replace min with min_t
  staging: vchiq: Fix block comment format in vchiq_dump()
  staging: octeon: indent with tabs instead of spaces
  staging: comedi: usbduxfast: usbduxfast_ai_cmdtest rounding error
  staging: most: core: remove sysfs attr remove_link
  staging: vc04: Fix Kconfig indentation
  staging: pi433: Fix Kconfig indentation
  staging: nvec: Fix Kconfig indentation
  staging: most: Fix Kconfig indentation
  staging: fwserial: Fix Kconfig indentation
  staging: fbtft: Fix Kconfig indentation
  fbtft: Drop OF dependency
  fbtft: Make use of device property API
  fbtft: Drop useless #ifdef CONFIG_OF and dead code
  fbtft: Describe function parameters in kernel-doc
  fbtft: Make sure string is NULL terminated
  staging: rtl8723bs: remove set but not used variable 'change', 'pos'
  ...
 2019-11-27 10:57:52 -08:00
Linus Torvalds
8f56e4ebe0 Char/Misc driver patches for 5.5-rc1 
Here is the big set of char/misc and other driver patches for 5.5-rc1
 
 Loads of different things in here, this feels like the catch-all of
 driver subsystems these days.  Full details are in the shortlog, but
 nothing major overall, just lots of driver updates and additions.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXd6ewA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymNXACfebVkDrFOH9EqDgFArPvZ1i9EmZ4AoLbE1Wki
 ftJApk+Ov1BT2TvClOza
 =cXqg
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big set of char/misc and other driver patches for 5.5-rc1

  Loads of different things in here, this feels like the catch-all of
  driver subsystems these days. Full details are in the shortlog, but
  nothing major overall, just lots of driver updates and additions.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (198 commits)
  char: Fix Kconfig indentation, continued
  habanalabs: add more protection of device during reset
  habanalabs: flush EQ workers in hard reset
  habanalabs: make the reset code more consistent
  habanalabs: expose reset counters via existing INFO IOCTL
  habanalabs: make code more concise
  habanalabs: use defines for F/W files
  habanalabs: remove prints on successful device initialization
  habanalabs: remove unnecessary checks
  habanalabs: invalidate MMU cache only once
  habanalabs: skip VA block list update in reset flow
  habanalabs: optimize MMU unmap
  habanalabs: prevent read/write from/to the device during hard reset
  habanalabs: split MMU properties to PCI/DRAM
  habanalabs: re-factor MMU masks and documentation
  habanalabs: type specific MMU cache invalidation
  habanalabs: re-factor memory module code
  habanalabs: export uapi defines to user-space
  habanalabs: don't print error when queues are full
  habanalabs: increase max jobs number to 512
  ...
 2019-11-27 10:53:50 -08:00
Linus Torvalds
d768869728 RDMA subsystem updates for 5.5 
Mainly a collection of smaller of driver updates this cycle.
 
 - Various driver updates and bug fixes for siw, bnxt_re, hns, qedr,
   iw_cxgb4, vmw_pvrdma, mlx5
 
 - Improvements in SRPT from working with iWarp
 
 - SRIOV VF support for bnxt_re
 
 - Skeleton kernel-doc files for drivers/infiniband
 
 - User visible counters for events related to ODP
 
 - Common code for tracking of mmap lifetimes so that drivers can link HW
   object liftime to a VMA
 
 - ODP bug fixes and rework
 
 - RDMA READ support for efa
 
 - Removal of the very old cxgb3 driver
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAl3dwFYACgkQOG33FX4g
 mxohHRAAnkUr0SKh1uV7vuhA8sUlejkwAaw2V2Sm3E1y4GiPpfRAak/FcbEu9F8l
 E7Q7VI04DRKTTpTRmREVyKYjlKr5QOA4mSryNMfBZobjkp+t++U1GC9YKL3zh65U
 odyJedtv3zKCLzV9RBwX06C8Vi1PQNQp7RbQ42xH/IyKXJIZPHeCUeKv7PsfTWVo
 vhuXFc9pPwqHDfRVTbj6s1g+OwVuRHc+SWep6eTKLGYvt8CqdN9WEpA0sJrlwPet
 NLTZTrFDpuC12RPc4Lo5c7R5MeAzHgojZCeSFaL2DhJLOx3kfmU30wG+rV94Lvsq
 Y2yt6BwKeLleKzpR5ApkuIVHQt2KECPrJbmVLDFqi+rT7yvzsd2AB+uiCS50+LPG
 h2UpWJdKWtrnSzTqbJQieXd+oT253Dk+ciy7zbdPSGPwz1dc/Cna9TTn26X2SezR
 bmRhHOykrh7LCNrv/7jiSq/zWApGTlR9YZ86x9Li+lJ3kkG+7d2DBEofDU+oKE5F
 p0+1Cer1td5IkN3N8oDpvyXAbCIv7qdWwXB2Cm7dSfUETIpAKnXiBxFCHyvmsuus
 7gGyKZh2490N3SoIL1muu12dIvhPC2Obg9ckCNU3ldw9+uPJkCzrs+n+JtkIW0mi
 i1fMjRQ6FumVT6/KdavYgeCsHmItVqv03SGdFsHF3SGwvWo6y8Y=
 =UV2u
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull rdma updates from Jason Gunthorpe:
 "Again another fairly quiet cycle with few notable core code changes
  and the usual variety of driver bug fixes and small improvements.

   - Various driver updates and bug fixes for siw, bnxt_re, hns, qedr,
     iw_cxgb4, vmw_pvrdma, mlx5

   - Improvements in SRPT from working with iWarp

   - SRIOV VF support for bnxt_re

   - Skeleton kernel-doc files for drivers/infiniband

   - User visible counters for events related to ODP

   - Common code for tracking of mmap lifetimes so that drivers can link
     HW object liftime to a VMA

   - ODP bug fixes and rework

   - RDMA READ support for efa

   - Removal of the very old cxgb3 driver"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (168 commits)
  RDMA/hns: Delete unnecessary callback functions for cq
  RDMA/hns: Rename the functions used inside creating cq
  RDMA/hns: Redefine the member of hns_roce_cq struct
  RDMA/hns: Redefine interfaces used in creating cq
  RDMA/efa: Expose RDMA read related attributes
  RDMA/efa: Support remote read access in MR registration
  RDMA/efa: Store network attributes in device attributes
  IB/hfi1: remove redundant assignment to variable ret
  RDMA/bnxt_re: Fix missing le16_to_cpu
  RDMA/bnxt_re: Fix stat push into dma buffer on gen p5 devices
  RDMA/bnxt_re: Fix chip number validation Broadcom's Gen P5 series
  RDMA/bnxt_re: Fix Kconfig indentation
  IB/mlx5: Implement callbacks for getting VFs GUID attributes
  IB/ipoib: Add ndo operation for getting VFs GUID attributes
  IB/core: Add interfaces to get VF node and port GUIDs
  net/core: Add support for getting VF GUIDs
  RDMA/qedr: Fix null-pointer dereference when calling rdma_user_mmap_get_offset
  RDMA/cm: Use refcount_t type for refcount variable
  IB/mlx5: Support extended number of strides for Striding RQ
  IB/mlx4: Update HW GID table while adding vlan GID
  ...
 2019-11-27 10:17:28 -08:00
Linus Torvalds
386403a115 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next 
Pull networking updates from David Miller:
 "Another merge window, another pull full of stuff:

   1) Support alternative names for network devices, from Jiri Pirko.

   2) Introduce per-netns netdev notifiers, also from Jiri Pirko.

   3) Support MSG_PEEK in vsock/virtio, from Matias Ezequiel Vara
      Larsen.

   4) Allow compiling out the TLS TOE code, from Jakub Kicinski.

   5) Add several new tracepoints to the kTLS code, also from Jakub.

   6) Support set channels ethtool callback in ena driver, from Sameeh
      Jubran.

   7) New SCTP events SCTP_ADDR_ADDED, SCTP_ADDR_REMOVED,
      SCTP_ADDR_MADE_PRIM, and SCTP_SEND_FAILED_EVENT. From Xin Long.

   8) Add XDP support to mvneta driver, from Lorenzo Bianconi.

   9) Lots of netfilter hw offload fixes, cleanups and enhancements,
      from Pablo Neira Ayuso.

  10) PTP support for aquantia chips, from Egor Pomozov.

  11) Add UDP segmentation offload support to igb, ixgbe, and i40e. From
      Josh Hunt.

  12) Add smart nagle to tipc, from Jon Maloy.

  13) Support L2 field rewrite by TC offloads in bnxt_en, from Venkat
      Duvvuru.

  14) Add a flow mask cache to OVS, from Tonghao Zhang.

  15) Add XDP support to ice driver, from Maciej Fijalkowski.

  16) Add AF_XDP support to ice driver, from Krzysztof Kazimierczak.

  17) Support UDP GSO offload in atlantic driver, from Igor Russkikh.

  18) Support it in stmmac driver too, from Jose Abreu.

  19) Support TIPC encryption and auth, from Tuong Lien.

  20) Introduce BPF trampolines, from Alexei Starovoitov.

  21) Make page_pool API more numa friendly, from Saeed Mahameed.

  22) Introduce route hints to ipv4 and ipv6, from Paolo Abeni.

  23) Add UDP segmentation offload to cxgb4, Rahul Lakkireddy"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1857 commits)
  libbpf: Fix usage of u32 in userspace code
  mm: Implement no-MMU variant of vmalloc_user_node_flags
  slip: Fix use-after-free Read in slip_open
  net: dsa: sja1105: fix sja1105_parse_rgmii_delays()
  macvlan: schedule bc_work even if error
  enetc: add support Credit Based Shaper(CBS) for hardware offload
  net: phy: add helpers phy_(un)lock_mdio_bus
  mdio_bus: don't use managed reset-controller
  ax88179_178a: add ethtool_op_get_ts_info()
  mlxsw: spectrum_router: Fix use of uninitialized adjacency index
  mlxsw: spectrum_router: After underlay moves, demote conflicting tunnels
  bpf: Simplify __bpf_arch_text_poke poke type handling
  bpf: Introduce BPF_TRACE_x helper for the tracing tests
  bpf: Add bpf_jit_blinding_enabled for !CONFIG_BPF_JIT
  bpf, testing: Add various tail call test cases
  bpf, x86: Emit patchable direct jump as tail call
  bpf: Constant map key tracking for prog array pokes
  bpf: Add poke dependency tracking for prog array maps
  bpf: Add initial poke descriptor table for jit images
  bpf: Move owner type, jited info into array auxiliary data
  ...
 2019-11-25 20:02:57 -08:00
Linus Torvalds
642356cb5f Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 
Pull crypto updates from Herbert Xu:
 "API:
   - Add library interfaces of certain crypto algorithms for WireGuard
   - Remove the obsolete ablkcipher and blkcipher interfaces
   - Move add_early_randomness() out of rng_mutex

  Algorithms:
   - Add blake2b shash algorithm
   - Add blake2s shash algorithm
   - Add curve25519 kpp algorithm
   - Implement 4 way interleave in arm64/gcm-ce
   - Implement ciphertext stealing in powerpc/spe-xts
   - Add Eric Biggers's scalar accelerated ChaCha code for ARM
   - Add accelerated 32r2 code from Zinc for MIPS
   - Add OpenSSL/CRYPTOGRAMS poly1305 implementation for ARM and MIPS

  Drivers:
   - Fix entropy reading failures in ks-sa
   - Add support for sam9x60 in atmel
   - Add crypto accelerator for amlogic GXL
   - Add sun8i-ce Crypto Engine
   - Add sun8i-ss cryptographic offloader
   - Add a host of algorithms to inside-secure
   - Add NPCM RNG driver
   - add HiSilicon HPRE accelerator
   - Add HiSilicon TRNG driver"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (285 commits)
  crypto: vmx - Avoid weird build failures
  crypto: lib/chacha20poly1305 - use chacha20_crypt()
  crypto: x86/chacha - only unregister algorithms if registered
  crypto: chacha_generic - remove unnecessary setkey() functions
  crypto: amlogic - enable working on big endian kernel
  crypto: sun8i-ce - enable working on big endian
  crypto: mips/chacha - select CRYPTO_SKCIPHER, not CRYPTO_BLKCIPHER
  hwrng: ks-sa - Enable COMPILE_TEST
  crypto: essiv - remove redundant null pointer check before kfree
  crypto: atmel-aes - Change data type for "lastc" buffer
  crypto: atmel-tdes - Set the IV after {en,de}crypt
  crypto: sun4i-ss - fix big endian issues
  crypto: sun4i-ss - hide the Invalid keylen message
  crypto: sun4i-ss - use crypto_ahash_digestsize
  crypto: sun4i-ss - remove dependency on not 64BIT
  crypto: sun4i-ss - Fix 64-bit size_t warnings on sun4i-ss-hash.c
  MAINTAINERS: Add maintainer for HiSilicon SEC V2 driver
  crypto: hisilicon - add DebugFS for HiSilicon SEC
  Documentation: add DebugFS doc for HiSilicon SEC
  crypto: hisilicon - add SRIOV for HiSilicon SEC
  ...
 2019-11-25 19:49:58 -08:00
Linus Torvalds
ff6814b078 for-5.5/block-20191121 
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl3WxrEQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpuH5D/9qQKfIIuQDUNO4Xx+dIHimTDCrfiEOeO9e
 CRaMuSj+yMxLDMwfX8RnDmR17H3ZVoiIY1CT24U9ZkA5iDjeAH4xmzkH30US7LR7
 /64YVZTxB0OrWppRK8RiIhaJJZDQ6+HPUQsn6PRaLVuFHi2unMoTQnj/ZQKz03QA
 Pl8Xx7qBtH1JwYCzQ21f/uryAcNg9eWabRLN2f1uiOXLmvRxOfh6Z/iaezlaZlmL
 qeJdcdLjjvOgOPwEOfNjfS6pd+XBz3gdEhn0l+11nHITxWZmVBwsWTKyUQlCmKnl
 yuCWDVyx5d6zCnlrLYG0l2Fn2lr9SwAkdkq3YAKV03hA/6s6P9q9bm31VvOf828x
 7gmr4YVz68y7H9bM0QAHCvDpjll0aIEUw6XFzSOCDtZ9B6/pppYQWzMU71J05eyF
 8DOKv2M2EVNLUjf6u0RDyolnWGU0kIjt5ryWE3OsGcezAVa2wYstgUJTKbrn1YgT
 j+4KTpaI+sg8GKDFauvxcSa6gwoRp6jweFNW+7vC090/shXmrGmVLOnQZKRuHho/
 O4W8y/1/deM8CCIAETpiNxA8RV5U/EZygrFGDFc7yzTtVDGHY356M/B4Bmm2qkVu
 K3WgeZp8Fc0lH0QF6Pp9ZlBkZEpGNCAPVsPkXIsxQXbctftkn3KY//uIubfpFEB1
 PpHSicvkww==
 =HYYq
 -----END PGP SIGNATURE-----

Merge tag 'for-5.5/block-20191121' of git://git.kernel.dk/linux-block

Pull core block updates from Jens Axboe:
 "Due to more granular branches, this one is small and will be followed
  with other core branches that add specific features. I meant to just
  have a core and drivers branch, but external dependencies we ended up
  adding a few more that are also core.

  The changes are:

   - Fixes and improvements for the zoned device support (Ajay, Damien)

   - sed-opal table writing and datastore UID (Revanth)

   - blk-cgroup (and bfq) blk-cgroup stat fixes (Tejun)

   - Improvements to the block stats tracking (Pavel)

   - Fix for overruning sysfs buffer for large number of CPUs (Ming)

   - Optimization for small IO (Ming, Christoph)

   - Fix typo in RWH lifetime hint (Eugene)

   - Dead code removal and documentation (Bart)

   - Reduction in memory usage for queue and tag set (Bart)

   - Kerneldoc header documentation (André)

   - Device/partition revalidation fixes (Jan)

   - Stats tracking for flush requests (Konstantin)

   - Various other little fixes here and there (et al)"

* tag 'for-5.5/block-20191121' of git://git.kernel.dk/linux-block: (48 commits)
  Revert "block: split bio if the only bvec's length is > SZ_4K"
  block: add iostat counters for flush requests
  block,bfq: Skip tracing hooks if possible
  block: sed-opal: Introduce SUM_SET_LIST parameter and append it using 'add_token_u64'
  blk-cgroup: cgroup_rstat_updated() shouldn't be called on cgroup1
  block: Don't disable interrupts in trigger_softirq()
  sbitmap: Delete sbitmap_any_bit_clear()
  blk-mq: Delete blk_mq_has_free_tags() and blk_mq_can_queue()
  block: split bio if the only bvec's length is > SZ_4K
  block: still try to split bio if the bvec crosses pages
  blk-cgroup: separate out blkg_rwstat under CONFIG_BLK_CGROUP_RWSTAT
  blk-cgroup: reimplement basic IO stats using cgroup rstat
  blk-cgroup: remove now unused blkg_print_stat_{bytes|ios}_recursive()
  blk-throtl: stop using blkg->stat_bytes and ->stat_ios
  bfq-iosched: stop using blkg->stat_bytes and ->stat_ios
  bfq-iosched: relocate bfqg_*rwstat*() helpers
  block: add zone open, close and finish ioctl support
  block: add zone open, close and finish operations
  block: Simplify REQ_OP_ZONE_RESET_ALL handling
  block: Remove REQ_OP_ZONE_RESET plugging
  ...
 2019-11-25 10:59:41 -08:00
Jaegeuk Kim
a4db59ac90 f2fs: expose main_blkaddr in sysfs 
Expose in /sys/fs/f2fs/<blockdev>/main_blkaddr the block address where the
main area starts. This allows user mode programs to determine:

- That pinned files that are made exclusively of fully allocated 2MB
  segments will never be unpinned by the file system.

- Where the main area starts. This is required by programs that want to
  verify if a file is made exclusively of 2MB f2fs segments, the alignment
  boundary for segments starts at this address. Testing for 2MB alignment
  relative to the start of the device is incorrect, because for some
  filesystems main_blkaddr is not at a 2MB boundary relative to the start
  of the device.

The entry will be used when validating reliable pinning file feature proposed
by "f2fs: support aligned pinned file".

Signed-off-by: Ramon Pantin <pantin@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
 2019-11-25 10:01:27 -08:00
Andrea Merello
83b9af6f28 Documentation: ABI: document IIO thermocouple_type file 
IIO core layer gained a new sysfs standard attribute "thermocouple_type".
This patch adds it to the list of documented ABI for sysfs-bus-iio

Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Patrick Havelange <patrick.havelange@essensium.com>
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Cc: Matt Ranostay <matt.ranostay@konsulko.com>
Cc: Chuhong Yuan <hslester96@gmail.com>
Cc: Daniel Gomez <dagmcr@gmail.com>
Cc: linux-iio@vger.kernel.org
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2019-11-23 12:37:25 +00:00
Andrea Merello
3f6bba1907 Documentation: ABI: document IIO in_temp_filter_notch_center_frequency file 
max31856 IIO driver introduced a new attribute
"in_temp_filter_notch_center_frequency".
This patch adds it to the list of documented ABI for sysfs-bus-iio

Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Patrick Havelange <patrick.havelange@essensium.com>
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Cc: Matt Ranostay <matt.ranostay@konsulko.com>
Cc: Chuhong Yuan <hslester96@gmail.com>
Cc: Daniel Gomez <dagmcr@gmail.com>
Cc: linux-iio@vger.kernel.org
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2019-11-23 12:30:59 +00:00
Longfang Liu
cbfe56e693 Documentation: add DebugFS doc for HiSilicon SEC 
This Documentation is for HiSilicon SEC DebugFS.

Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Kai Ye <yekai13@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
 2019-11-22 18:48:36 +08:00
Branden Bonaby
af9ca6f9bb drivers: hv: vmbus: Introduce latency testing 
Introduce user specified latency in the packet reception path
By exposing the test parameters as part of the debugfs channel
attributes. We will control the testing state via these attributes.

Signed-off-by: Branden Bonaby <brandonbonaby94@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
 2019-11-21 20:10:44 -05:00
Heiner Kallweit
72ea91afbf PCI/ASPM: Add sysfs attributes for controlling ASPM link states 
Add sysfs attributes to Endpoints and other Upstream Ports to control ASPM,
Clock PM, and L1 PM Substates.  The new attributes are:

  /sys/devices/pci*/.../link/clkpm
  /sys/devices/pci*/.../link/l0s_aspm
  /sys/devices/pci*/.../link/l1_aspm
  /sys/devices/pci*/.../link/l1_1_aspm
  /sys/devices/pci*/.../link/l1_2_aspm
  /sys/devices/pci*/.../link/l1_1_pcipm
  /sys/devices/pci*/.../link/l1_2_pcipm

An attribute is only visible if both ends of the Link leading to the device
support the state.  Writing y/1/on to the file enables the state; n/0/off
disables it.

These attributes can be used to tune the power/performance tradeoff for
individual devices.

[bhelgaas: commit log, rename directory to "link"]
Link: https://lore.kernel.org/r/b1c83f8a-9bf6-eac5-82d0-cf5b90128fbf@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
 2019-11-21 17:30:24 -06:00
Konstantin Khlebnikov
b686631865 block: add iostat counters for flush requests 
Requests that triggers flushing volatile writeback cache to disk (barriers)
have significant effect to overall performance.

Block layer has sophisticated engine for combining several flush requests
into one. But there is no statistics for actual flushes executed by disk.
Requests which trigger flushes usually are barriers - zero-size writes.

This patch adds two iostat counters into /sys/class/block/$dev/stat and
/proc/diskstats - count of completed flush requests and their total time.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
 2019-11-21 09:06:47 -07:00
Rasmus Villemoes
bc44fa734c watchdog: make nowayout sysfs file writable 
It can be useful to delay setting the nowayout feature for a watchdog
device. Moreover, not every driver (notably gpio_wdt) implements a
nowayout module parameter/otherwise respects CONFIG_WATCHDOG_NOWAYOUT,
and modifying those drivers carries a risk of causing a regression for
someone who has two watchdog devices, sets CONFIG_WATCHDOG_NOWAYOUT
and somehow relies on the gpio_wdt driver being ignorant of
that (i.e., allowing one to gracefully close a gpio_wdt but not the
other watchdog in the system).

So instead, simply make the nowayout sysfs file writable. Obviously,
setting nowayout is a one-way street.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191105205118.11359-1-linux@rasmusvillemoes.dk
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
 2019-11-18 19:53:43 +01:00
David S. Miller
19b7e21c55 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 
Lots of overlapping changes and parallel additions, stuff
like that.

Signed-off-by: David S. Miller <davem@davemloft.net>
 2019-11-16 21:51:42 -08:00
Alexander Usyskin
64498695dd mei: bus: add more client attributes to sysfs 
Export more client attributes via sysfs that are usually obtained
upon connection. In some cases, for example a monitoring application
may wish to know the attributes without actually performing the connection.
Added attributes:
max number of connections, fixed address, max message length.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20191116142136.17535-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2019-11-16 12:58:54 +01:00
Nayna Jain
bd5d9c743d powerpc: expose secure variables to userspace via sysfs 
PowerNV secure variables, which store the keys used for OS kernel
verification, are managed by the firmware. These secure variables need to
be accessed by the userspace for addition/deletion of the certificates.

This patch adds the sysfs interface to expose secure variables for PowerNV
secureboot. The users shall use this interface for manipulating
the keys stored in the secure variables.

Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Eric Richter <erichte@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1573441836-3632-3-git-send-email-nayna@linux.ibm.com
 2019-11-13 00:33:22 +11:00
Nayna Jain
273df864cf ima: Check against blacklisted hashes for files with modsig 
Asymmetric private keys are used to sign multiple files. The kernel
currently supports checking against blacklisted keys. However, if the
public key is blacklisted, any file signed by the blacklisted key will
automatically fail signature verification. Blacklisting the public key
is not fine enough granularity, as we might want to only blacklist a
particular file.

This patch adds support for checking against the blacklisted hash of
the file, without the appended signature, based on the IMA policy. It
defines a new policy option "appraise_flag=check_blacklist".

In addition to the blacklisted binary hashes stored in the firmware
"dbx" variable, the Linux kernel may be configured to load blacklisted
binary hashes onto the .blacklist keyring as well. The following
example shows how to blacklist a specific kernel module hash.

  $ sha256sum kernel/kheaders.ko
  77fa889b35a05338ec52e51591c1b89d4c8d1c99a21251d7c22b1a8642a6bad3
  kernel/kheaders.ko

  $ grep BLACKLIST .config
  CONFIG_SYSTEM_BLACKLIST_KEYRING=y
  CONFIG_SYSTEM_BLACKLIST_HASH_LIST="blacklist-hash-list"

  $ cat certs/blacklist-hash-list
  "bin:77fa889b35a05338ec52e51591c1b89d4c8d1c99a21251d7c22b1a8642a6bad3"

Update the IMA custom measurement and appraisal policy
rules (/etc/ima-policy):

  measure func=MODULE_CHECK template=ima-modsig
  appraise func=MODULE_CHECK appraise_flag=check_blacklist
  appraise_type=imasig|modsig

After building, installing, and rebooting the kernel:

   545660333 ---lswrv      0     0   \_ blacklist:
  bin:77fa889b35a05338ec52e51591c1b89d4c8d1c99a21251d7c22b1a8642a6bad3

  measure func=MODULE_CHECK template=ima-modsig
  appraise func=MODULE_CHECK appraise_flag=check_blacklist
  appraise_type=imasig|modsig

  modprobe: ERROR: could not insert 'kheaders': Permission denied

  10 0c9834db5a0182c1fb0cdc5d3adcf11a11fd83dd ima-sig
  sha256:3bc6ed4f0b4d6e31bc1dbc9ef844605abc7afdc6d81a57d77a1ec9407997c40
  2 /usr/lib/modules/5.4.0-rc3+/kernel/kernel/kheaders.ko

  10 82aad2bcc3fa8ed94762356b5c14838f3bcfa6a0 ima-modsig
  sha256:3bc6ed4f0b4d6e31bc1dbc9ef844605abc7afdc6d81a57d77a1ec9407997c40
  2 /usr/lib/modules/5.4.0rc3+/kernel/kernel/kheaders.ko  sha256:77fa889b3
  5a05338ec52e51591c1b89d4c8d1c99a21251d7c22b1a8642a6bad3
  3082029a06092a864886f70d010702a082028b30820287020101310d300b0609608648
  016503040201300b06092a864886f70d01070131820264....

  10 25b72217cc1152b44b134ce2cd68f12dfb71acb3 ima-buf
  sha256:8b58427fedcf8f4b20bc8dc007f2e232bf7285d7b93a66476321f9c2a3aa132
  b blacklisted-hash
  77fa889b35a05338ec52e51591c1b89d4c8d1c99a21251d7c22b1a8642a6bad3

Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
[zohar@linux.ibm.com: updated patch description]
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1572492694-6520-8-git-send-email-zohar@linux.ibm.com
 2019-11-12 12:25:50 +11:00
Rishi Gupta
56a8e68328 iio: documentation: light: Add veml6030 sysfs documentation 
The driver for veml6030 light sensor provides sysfs
entries like configuring cutoff for interrupt. This
commit document them.

Signed-off-by: Rishi Gupta <gupt21@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2019-11-10 11:36:13 +00:00
Greg Kroah-Hartman
bce92136c2 Here is the first set of FPGA changes for 5.5 
The first patch from Stephen is a trivial cleanup patch.
 
 The following three patches add hwmon support to DFL FPGAs.
 
 All of this patches have been reviewed and been in the last couple
 of linux-next releases without issues.
 
 Signed-off-by: Moritz Fischer <mdf@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQS/ea/a56fFi9QbQeJ+E8eWOj6VqQUCXcWTQgAKCRB+E8eWOj6V
 qYnWAQC5CoGbiwH3xcGCXd4XEsr/DHyeZlblb0iLE9ObGit4qAD/Tzx2nw8VIGJ8
 QJlYbV6t8M/B5JoXCaWbd41A3065tA0=
 =X9Sr
 -----END PGP SIGNATURE-----

Merge tag 'fpga-dfl-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-next

Moritz writes:

Here is the first set of FPGA changes for 5.5

The first patch from Stephen is a trivial cleanup patch.

The following three patches add hwmon support to DFL FPGAs.

All of this patches have been reviewed and been in the last couple
of linux-next releases without issues.

Signed-off-by: Moritz Fischer <mdf@kernel.org>

* tag 'fpga-dfl-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
  fpga: dfl: fme: add power management support
  fpga: dfl: fme: add thermal management support
  Documentation: fpga: dfl: add descriptions for thermal/power management interfaces
  fpga: Remove dev_err() usage after platform_get_irq()
 2019-11-08 18:48:40 +01:00
Joel Stanley
2fc95e0413 ABI: Update FSI path documentation 
The paths added back in 4.13 weren't quite correct. The in reality the
files documented lived under

  /sys/devices/../fsi0/rescan
  /sys/devices/../fsi0/break
  /sys/devices/../fsi0/slave@00:00/term
  /sys/devices/../fsi0/slave@00:00/raw

In 5.5 with the addition of the FSI class they move to

  /sys/devices/../fsi-master/fsi0/rescan
  /sys/devices/../fsi-master/fsi0/break
  /sys/devices/../fsi-master/fsi0/slave@00:00/term
  /sys/devices/../fsi-master/fsi0/slave@00:00/raw

This is closer to how the (incorrect) documentation described them.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20191108051945.7109-4-joel@jms.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2019-11-08 11:23:18 +01:00
Mike Leach
b3ef0df181 coresight: etm4x: docs: Update ABI doc for new sysfs etm4 attributes 
This updates the ABI document to reflect recent additions to the ETM4.X
driver sysfs interface.

Signed-off-by: Mike Leach <mike.leach@linaro.org>
[Updated Date and KernelVersion fields]
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
 2019-11-07 13:17:25 -07:00
Mike Leach
5c8fac10c8 coresight: etm4x: docs: Update ABI doc for new sysfs name scheme. 
Recent updates to CoreSight drivers have changed the component naming
schema used in sysfs.

This updates the ABI document to reflect the new naming schema.

Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
 2019-11-07 13:17:25 -07:00
Greg Kroah-Hartman
4180468e16 thunderbolt: Changes for v5.5 merge window 
This adds Thunderbolt 3 support for the software connection manager. It
 is currently only used in Apple systems. Previously the driver started
 the firmware connection manager on those but it is not necessary anymore
 with these patches (we still leave user an option to start the firmware
 in case there are problems with the software connection manager).
 
 This includes:
 
   - Expose 'generation' attribute under each device in sysfs
   - Converting register names to follow the USB4 spec.
   - Lane bonding support
   - Expose link speed and width in sysfs
   - Display Port handshake needed for Titan Ridge devices
   - Display Port pairing and resource management
   - Display Port bandwidth management
 -----BEGIN PGP SIGNATURE-----
 
 iQJUBAABCgA+FiEEVTdhRGBbNzLrSUBaAP2fSd+ZWKAFAl3ED00gHG1pa2Eud2Vz
 dGVyYmVyZ0BsaW51eC5pbnRlbC5jb20ACgkQAP2fSd+ZWKChGw//UJdZcc1uJWhw
 nXoCzJzgseBXCigwE/B44q6P//aqh3Ku9gexApeQC4KMuRWHx2OGzhI8Xji/wBV0
 z9miqRNYseUMwAkiYIvHmZFICJZfBkawenItaoI8sDzRD7vKz39puHDx1icfa4jL
 INAe0GiMtaJtqbVIq4FPz77kuGhmMhEdJcbPbLqTm58gqtXW66K2L1XwDHi5bQSa
 rnw/uUPr9jdek2KfT0nbGwIgP+7+26Igm/JuZcTTFpG9kymy6faukdMHQXiKThM0
 E5azC9BDz80HKiFcCqBjCH165iTxmhrvwOPi9SnTBBi59Xd6P4/NewsT84mtAVCA
 p4SgXzbfCLdojhiBbGTQYan91kBSaBPkjsnhy5hthWtPFKj2ELTqv+WX32kUSHyc
 LFgrC4eu4028Iv8xngMAOzle3+0prc6Gr5248te4yUx3OXPxMiN8AbDw41aUt5dK
 JnKeedNw+ZhvUzN0nOs29gBURSmr4qRpj7T/ZmZRPpe0qx+pSVMa17rBTo3Qk45/
 lZCLVmVwC42DXUmWOZdYvAijWwF/z0L3Rsk38xGs+7DjbFepN1XaUi5cuoMmaqZp
 PJ9ogn19GtazS8Anwawy99ry/2EjqeGiSrW42Zzk2w8hktW6IiSrWQppMcZGmhvW
 c6Lz04I42ZtW3UjnmSe4WIXZtLvMz/8=
 =LiDm
 -----END PGP SIGNATURE-----

Merge tag 'thunderbolt-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into char-misc-next

Mika writes:

thunderbolt: Changes for v5.5 merge window

This adds Thunderbolt 3 support for the software connection manager. It
is currently only used in Apple systems. Previously the driver started
the firmware connection manager on those but it is not necessary anymore
with these patches (we still leave user an option to start the firmware
in case there are problems with the software connection manager).

This includes:

  - Expose 'generation' attribute under each device in sysfs
  - Converting register names to follow the USB4 spec.
  - Lane bonding support
  - Expose link speed and width in sysfs
  - Display Port handshake needed for Titan Ridge devices
  - Display Port pairing and resource management
  - Display Port bandwidth management

* tag 'thunderbolt-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (21 commits)
  thunderbolt: Do not start firmware unless asked by the user
  thunderbolt: Add bandwidth management for Display Port tunnels
  thunderbolt: Add Display Port adapter pairing and resource management
  thunderbolt: Add Display Port CM handshake for Titan Ridge devices
  thunderbolt: Add downstream PCIe port mappings for Alpine and Titan Ridge
  thunderbolt: Expand controller name in tb_switch_is_xy()
  thunderbolt: Add default linking between lane adapters if not provided by DROM
  thunderbolt: Add support for lane bonding
  thunderbolt: Refactor add_switch() into two functions
  thunderbolt: Add helper macro to iterate over switch ports
  thunderbolt: Make tb_sw_write() take const parameter
  thunderbolt: Convert DP adapter register names to follow the USB4 spec
  thunderbolt: Convert PCIe adapter register names to follow the USB4 spec
  thunderbolt: Convert basic adapter register names to follow the USB4 spec
  thunderbolt: Log error if adding switch fails
  thunderbolt: Log switch route string on config read/write timeout
  thunderbolt: Introduce tb_switch_is_icm()
  thunderbolt: Add 'generation' attribute for devices
  thunderbolt: Drop unnecessary read when writing LC command in Ice Lake
  thunderbolt: Fix lockdep circular locking depedency warning
  ...
 2019-11-07 15:24:16 +01:00
Alexander Usyskin
52f6efdf80 mei: add trc detection register to sysfs 
The glitch detection HW (TRC) save it status information into
TRC status register.
Make it available to user-space via read-only sysfs file.
The TRC register is availab for PCH15 gen and newer, for older
platforms reading the sysfs file will fail with EOPNOTSUPP.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20191107104445.19101-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2019-11-07 09:37:27 +01:00
Vineela Tummalapalli
db4d30fbb7 x86/bugs: Add ITLB_MULTIHIT bug infrastructure 
Some processors may incur a machine check error possibly resulting in an
unrecoverable CPU lockup when an instruction fetch encounters a TLB
multi-hit in the instruction TLB. This can occur when the page size is
changed along with either the physical address or cache type. The relevant
erratum can be found here:

   https://bugzilla.kernel.org/show_bug.cgi?id=205195

There are other processors affected for which the erratum does not fully
disclose the impact.

This issue affects both bare-metal x86 page tables and EPT.

It can be mitigated by either eliminating the use of large pages or by
using careful TLB invalidations when changing the page size in the page
tables.

Just like Spectre, Meltdown, L1TF and MDS, a new bit has been allocated in
MSR_IA32_ARCH_CAPABILITIES (PSCHANGE_MC_NO) and will be set on CPUs which
are mitigated against this issue.

Signed-off-by: Vineela Tummalapalli <vineela.tummalapalli@intel.com>
Co-developed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
 2019-11-04 12:22:01 +01:00
Oleh Kravchenko
fc19967bcb leds: add LED driver for EL15203000 board 
This patch adds a LED class driver for the LEDs found on
the Crane Merchandising System EL15203000 LEDs board
(aka RED LEDs board).

Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua>
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
 2019-11-03 17:37:06 +01:00
Mika Westerberg
91c0c12080 thunderbolt: Add support for lane bonding 
Lane bonding allows aggregating two 10/20 Gb/s (depending on the
generation) lanes into a single 20/40 Gb/s bonded link. This allows
sharing the full bandwidth more efficiently. In order to establish lane
bonding we need to check that lane bonding is possible through link
controller and that both ends of the link actually supports 2x widths.
This also means that all the paths should be established through the
primary port so update tb_path_alloc() to handle this as well.

Lane bonding is supported starting from Falcon Ridge (2nd generation)
controllers.

We also expose the current speed and number of lanes under each device
except the host router following similar attribute naming than USB bus.
Expose speed and number of lanes for both directions to allow possibility
of asymmetric link in the future.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
 2019-11-02 12:13:31 +03:00
Julian Wiedmann
e528afb72a Documentation: net-sysfs: describe missing statistics 
Sync the ABI description with the interface statistics that are currently
available through sysfs.

CC: Jarod Wilson <jarod@redhat.com>
CC: Jonathan Corbet <corbet@lwn.net>
CC: linux-doc@vger.kernel.org
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2019-10-29 17:38:39 -07:00
Pawan Gupta
a7a248c593 x86/speculation/taa: Add documentation for TSX Async Abort 
Add the documenation for TSX Async Abort. Include the description of
the issue, how to check the mitigation state, control the mitigation,
guidance for system administrators.

 [ bp: Add proper SPDX tags, touch ups by Josh and me. ]

Co-developed-by: Antonio Gomez Iglesias <antonio.gomez.iglesias@intel.com>

Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Antonio Gomez Iglesias <antonio.gomez.iglesias@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Mark Gross <mgross@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
 2019-10-28 08:37:00 +01:00
Wu Hao
fddc9fcbe6 fpga: dfl: fme: add power management support 
This patch adds support for power management private feature under
FPGA Management Engine (FME). This private feature driver registers
a hwmon for power (power1_input), thresholds information, e.g.
(power1_max / crit / max_alarm / crit_alarm) and also read-only sysfs
interfaces for other power management information. For configuration,
user could write threshold values via above power1_max / crit sysfs
interface under hwmon too.

Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
 2019-10-16 19:18:27 -07:00
Wu Hao
4284c65a9f fpga: dfl: fme: add thermal management support 
This patch adds support to thermal management private feature for DFL
FPGA Management Engine (FME). This private feature driver registers
a hwmon for thermal/temperature monitoring (hwmon temp1_input).
If hardware automatic throttling is supported by this hardware, then
driver also exposes sysfs interfaces under hwmon for thresholds
(temp1_max/ crit/ emergency), threshold alarms (temp1_max_alarm/
temp1_crit_alarm) and throttling policy (temp1_max_policy).

Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
 2019-10-16 19:18:27 -07:00
Liming Sun
79e29cb8fb platform/mellanox: Add bootctl driver for Mellanox BlueField Soc 
This commit adds the bootctl platform driver for Mellanox BlueField
Soc, which queries secure state and controls the eMMC boot partition
swapping by sending SMC calls to ATF running at EL3.

Below are the sequences of typical use case.

  1. User requests boot partition swapping, which could be on-demand or
     during boot-image upgrade via UEFI capsule;

  2. This bootctl driver handles the request and sends SMC call
     to ATF. ATF programs register BREADCRUMB0 which has value
     preserved during warm reset. It also programs eMMC to swap
     the boot partition;

  3. After software reset (rebooting), ATF BL1 (BootRom) checks
     register BREADCRUMB0 and enable watchdog if configured;

  4. If booting fails, the watchdog timer will trigger rebooting.
     In such case, ATF Boot ROM will switch the boot partition
     back to the previous one. This is a robust feature and used
     to prevent failure during boot partition upgrade.

Reviewed-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Liming Sun <lsun@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
 2019-10-15 10:55:10 +03:00
Greg Kroah-Hartman
9dc86c234e First set of IIO new device support, cleanups and features for the 5.5 cycle 
Third version with the adis rework set dropped as better to just have
 a fresh version of that at some future date.
 
 The usual mixed backs of new device support being added to drivers,
 long term reworks continuing and little per driver cleanups and
 features.
 
 Also a few trivial counter subsystem tidy ups on behalf of William.
 
 Core new feature
 * Device label support.  A long requested feature no one got around to
   implementing before.  Allows DT based provision of a 'label' that
   identifies a device uniquely within a system.  This differs from existing
   'name' which is meant to be the part number.
 New device support
 * ingenic-adc
   - Support for the JZ4770 SoC ADC including bindings.
 * inv_mpu6050
   - Add support for magnetometer in MPU925x parts.
     Fiddly to do as this is actually a separate device sitting inside the
     package, but with the master device being able to schedule reads etc.
     Will only run if the auxiliary bus is not in use for any other devices.
 
 Features
 * ad7192
   - Userspace calibration controls to do zero and full scale.
 * st_lsm6dsx
   - Enable latched interrupts by default for sensors events with related clear.
   - Motion events and related wakeup source.  This needed quite a bit of
     refactoring as well.
 
 Cleanups and minor features
 * ad7192
   - sysfs ABI docs
 * ad7949
   - Remove code to readback configuration word as driver never actually enabled
     it.
   - Fix incorrect xfer length.  Not actually known to cause problems other
     than wasted bus usage.
 * adis16080
   - Replace core mlock usage with local lock with more appropriate scope.
 * adis16130
   - Remove pointless mlock usage.
 * adis16240
   - Remove include of gpio.h as no gpio usage.
 * atlas-ph-sensor
   - Improve logical ordering of buffer predisable / postenable functions.
     This is part of a longer term rework Alexandru is driving towards.
 * bh1750
   - Fix up a static compiler warning and make the code more readable.
   - yaml conversion of binding + MAINTAINERS entry.
 * bmp280
   - Drop a stray newline.
 * cm36651
   - Drop a redundant assignment
 * itg3200
   - Alignment cleanup.
 * max31856
   - Add missing of_node and parent references, useful to identify the device.
 * sc27xx_adc
   - Use devm_hwspin_lock_request_specific rather than local rolled version.
 * stm32-lptimer counter
   - kernel-doc warning.
 * stm32-timer counter
   - kernel-doc warning.
   - Alignment cleanup.
 * sx9500
   - Improve logical ordering of buffer predisable / postenable functions.
     This is part of a longer term rework Alexandru is driving towards.
 * tcs3414
   - Improve logical ordering of buffer predisable / postenable functions.
     This is part of a longer term rework Alexandru is driving towards.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAl2i3GIRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FohHeRAAlZ0gHdNKJ/30vtX2GZQiSE0IrQlbTYVz
 5t0Zvm1RWpuHdbMpANtsjPYI5oDUEO34O8520Kl6g/AwIQ6qfqpbaToTZA76fu8M
 B7eHO6a+UHL5kKFV5YQS2cDqtDpuPo1SR/0cCe7dDcjwvAm8jeehKtlCUFTVImU5
 sMEuaD41Sr8Y5IuTpQIqFaGc4BS0s4NUJ7+fkq6ud3Qlw6CVWdLz0pz/kjnnLJcP
 jdr+VRqD6x+gXrujX+1iaeFu+r2dF+a9z3aPgr8vJj/6asnY0uihs82YTuL2v4Wb
 tBM3MKooTQt1zgrCEO7n/+GzC02pXbQ8mRPI2H1eOl4jaJhyttkSNztEo9k4EQ3N
 wYbAvc97yWNVthHd/2z7rDYf3SntN8nqjCkeuvn83P/6uhQS9EzSiVV2hkUda0K0
 y1ZKOTDH0W+jCFITCtrDR1GLdV6GLPiv1AlG5l9AXyUfRBFBRWg9duLFYeVsVouu
 g3yxzO0PbsNKMbPqjwT+YzNCd4/QKpuU7/+WTBSNUVo428i/p3lpnXQyhJiQrWIE
 3TH+pj6Es8WYNmuRw3h9bMTjxca9Esk/e6MZ8vnOFUKrHB1T1iQB+rSsascZQM9a
 +uv+d2x27KVUqotP8DLat1FYHDIbaIScKJioAWsLepscpBucJ3ayHq5yOFGXXp9i
 KKqT9ObTUfw=
 =nIWU
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-5.5a-take3' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of IIO new device support, cleanups and features for the 5.5 cycle

Third version with the adis rework set dropped as better to just have
a fresh version of that at some future date.

The usual mixed backs of new device support being added to drivers,
long term reworks continuing and little per driver cleanups and
features.

Also a few trivial counter subsystem tidy ups on behalf of William.

Core new feature
* Device label support.  A long requested feature no one got around to
  implementing before.  Allows DT based provision of a 'label' that
  identifies a device uniquely within a system.  This differs from existing
  'name' which is meant to be the part number.
New device support
* ingenic-adc
  - Support for the JZ4770 SoC ADC including bindings.
* inv_mpu6050
  - Add support for magnetometer in MPU925x parts.
    Fiddly to do as this is actually a separate device sitting inside the
    package, but with the master device being able to schedule reads etc.
    Will only run if the auxiliary bus is not in use for any other devices.

Features
* ad7192
  - Userspace calibration controls to do zero and full scale.
* st_lsm6dsx
  - Enable latched interrupts by default for sensors events with related clear.
  - Motion events and related wakeup source.  This needed quite a bit of
    refactoring as well.

Cleanups and minor features
* ad7192
  - sysfs ABI docs
* ad7949
  - Remove code to readback configuration word as driver never actually enabled
    it.
  - Fix incorrect xfer length.  Not actually known to cause problems other
    than wasted bus usage.
* adis16080
  - Replace core mlock usage with local lock with more appropriate scope.
* adis16130
  - Remove pointless mlock usage.
* adis16240
  - Remove include of gpio.h as no gpio usage.
* atlas-ph-sensor
  - Improve logical ordering of buffer predisable / postenable functions.
    This is part of a longer term rework Alexandru is driving towards.
* bh1750
  - Fix up a static compiler warning and make the code more readable.
  - yaml conversion of binding + MAINTAINERS entry.
* bmp280
  - Drop a stray newline.
* cm36651
  - Drop a redundant assignment
* itg3200
  - Alignment cleanup.
* max31856
  - Add missing of_node and parent references, useful to identify the device.
* sc27xx_adc
  - Use devm_hwspin_lock_request_specific rather than local rolled version.
* stm32-lptimer counter
  - kernel-doc warning.
* stm32-timer counter
  - kernel-doc warning.
  - Alignment cleanup.
* sx9500
  - Improve logical ordering of buffer predisable / postenable functions.
    This is part of a longer term rework Alexandru is driving towards.
* tcs3414
  - Improve logical ordering of buffer predisable / postenable functions.
    This is part of a longer term rework Alexandru is driving towards.

* tag 'iio-for-5.5a-take3' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (41 commits)
  iio: pressure: bmp280: remove stray newline
  iio: adc: sc27xx: Use devm_hwspin_lock_request_specific() to simplify code
  iio: chemical: atlas-ph-sensor: fix iio_triggered_buffer_predisable() position
  iio: gyro: clean up indentation issue
  counter: stm32: clean up indentation issue
  iio: proximity: sx9500: fix iio_triggered_buffer_{predisable,postenable} positions
  iio: core: Add optional symbolic label to device attributes
  dt-binding: iio: Add optional label property
  iio: gyro: adis16080: replace mlock with own lock
  counter: stm32-lptimer-cnt: fix a kernel-doc warning
  counter: stm32-timer-cnt: fix a kernel-doc warning
  iio: gyro: adis16130: remove mlock usage
  MAINTAINERS: add entry for ROHM BH1750 driver
  dt-bindings: iio: light: bh1750: convert bindings to yaml
  iio: imu: st_lsm6dsx: add motion report function and call from interrupt
  iio: imu: st_lsm6dsx: always enter interrupt thread
  iio: imu: st_lsm6dsx: add wakeup-source option
  iio: imu: st_lsm6dsx: add motion events
  iio: imu: st_lsm6dsx: move interrupt thread to core
  iio: imu: inv_mpu6050: add fifo support for magnetometer data
  ...
 2019-10-13 10:59:05 +02:00
Daniel Campello
fdf0fe2df3 platform/chrome: wilco_ec: Add Dell's USB PowerShare Policy control 
USB PowerShare is a policy which affects charging via the special
USB PowerShare port (marked with a small lightning bolt or battery icon)
when in low power states:
- In S0, the port will always provide power.
- In S0ix, if usb_charge is enabled, then power will be supplied to
  the port when on AC or if battery is > 50%. Else no power is supplied.
- In S5, if usb_charge is enabled, then power will be supplied to
  the port when on AC. Else no power is supplied.

Signed-off-by: Daniel Campello <campello@chromium.org>
Signed-off-by: Nick Crews <ncrews@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
 2019-10-11 12:12:04 +02:00
Zaibo Xu
b492f82fce Documentation: Add debugfs doc for hisi_hpre 
Add debugfs descriptions for HiSilicon HPRE driver.

Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
 2019-10-10 23:36:32 +11:00
Christian Kellner
b406357c57 thunderbolt: Add 'generation' attribute for devices 
The Thunderbolt standard went through several major iterations, here
called generation. USB4, which will be based on Thunderbolt, will be
generation 4. Let userspace know the generation of the controller in
the devices in order to distinguish between Thunderbolt and USB4, so
it can be shown in various user interfaces.

Signed-off-by: Christian Kellner <christian@kellner.me>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
 2019-10-09 13:03:25 +03:00
Honggang Li
547ed331bb RDMA/srp: Add parse function for maximum initiator to target IU size 
According to SRP specifications 'srp-r16a' and 'srp2r06',
IOControllerProfile attributes for SRP target port include the maximum
initiator to target IU size.

SRP connection daemons, such as srp_daemon, can get the value from the
subnet manager. The SRP connection daemon can pass this value to kernel.

This patch adds a parse function for it.

Upstream commit [1] enables the kernel parameter, 'use_imm_data', by
default. [1] also use (8 * 1024) as the default value for kernel parameter
'max_imm_data'. With those default values, the maximum initiator to target
IU size will be 8260.

In case the SRPT modules, which include the in-tree 'ib_srpt.ko' module,
do not support SRP-2 'immediate data' feature, the default maximum
initiator to target IU size is significantly smaller than 8260. For
'ib_srpt.ko' module, which built from source before [2], the default
maximum initiator to target IU is 2116.

[1] introduces a regression issue for old srp targets with default kernel
parameters, as the connection will be rejected because of a too large
maximum initiator to target IU size.

[1] commit 882981f4a4 ("RDMA/srp: Add support for immediate data")
[2] commit 5dabcd0456 ("RDMA/srpt: Add support for immediate data")

Link: https://lore.kernel.org/r/20190927174352.7800-1-honli@redhat.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Honggang Li <honli@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
 2019-10-08 15:17:32 -03:00
Alexander Usyskin
7366830921 mei: fix modalias documentation 
mei client bus added the client protocol version to the device alias,
but ABI documentation was not updated.

Fixes: b26864cad1 (mei: bus: add client protocol version to the device alias)
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20191008005735.12707-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2019-10-08 09:46:01 +02:00
Potnuri Bharat Teja
30e0f6cf5a RDMA/iw_cxgb3: Remove the iw_cxgb3 module from kernel 
Remove iw_cxgb3 module from kernel as the corresponding HW Chelsio T3 has
reached EOL.

Link: https://lore.kernel.org/r/20190930074252.20133-1-bharat@chelsio.com
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
 2019-10-04 15:08:59 -03:00
Oskar Senft
8d310c9107 drivers/tty/serial/8250: Make Aspeed VUART SIRQ polarity configurable 
Make the SIRQ polarity for Aspeed AST24xx/25xx VUART configurable via
sysfs. This setting need to be changed on specific host platforms
depending on the selected host interface (LPC / eSPI).

The setting is configurable via sysfs rather than device-tree to stay in
line with other related configurable settings.

On AST2500 the VUART SIRQ polarity can be auto-configured by reading a
bit from a configuration register, e.g. the LPC/eSPI interface
configuration bit.

Tested: Verified on TYAN S7106 mainboard.
Signed-off-by: Oskar Senft <osk@google.com>
Link: https://lore.kernel.org/r/20190905144130.220713-1-osk@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2019-10-04 15:05:20 +02:00
Linus Torvalds
f1f2f614d5 Merge branch 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity 
Pull integrity updates from Mimi Zohar:
 "The major feature in this time is IMA support for measuring and
  appraising appended file signatures. In addition are a couple of bug
  fixes and code cleanup to use struct_size().

  In addition to the PE/COFF and IMA xattr signatures, the kexec kernel
  image may be signed with an appended signature, using the same
  scripts/sign-file tool that is used to sign kernel modules.

  Similarly, the initramfs may contain an appended signature.

  This contained a lot of refactoring of the existing appended signature
  verification code, so that IMA could retain the existing framework of
  calculating the file hash once, storing it in the IMA measurement list
  and extending the TPM, verifying the file's integrity based on a file
  hash or signature (eg. xattrs), and adding an audit record containing
  the file hash, all based on policy. (The IMA support for appended
  signatures patch set was posted and reviewed 11 times.)

  The support for appended signature paves the way for adding other
  signature verification methods, such as fs-verity, based on a single
  system-wide policy. The file hash used for verifying the signature and
  the signature, itself, can be included in the IMA measurement list"

* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  ima: ima_api: Use struct_size() in kzalloc()
  ima: use struct_size() in kzalloc()
  sefltest/ima: support appended signatures (modsig)
  ima: Fix use after free in ima_read_modsig()
  MODSIGN: make new include file self contained
  ima: fix freeing ongoing ahash_request
  ima: always return negative code for error
  ima: Store the measurement again when appraising a modsig
  ima: Define ima-modsig template
  ima: Collect modsig
  ima: Implement support for module-style appended signatures
  ima: Factor xattr_verify() out of ima_appraise_measurement()
  ima: Add modsig appraise_type option for module-style appended signatures
  integrity: Select CONFIG_KEYS instead of depending on it
  PKCS#7: Introduce pkcs7_get_digest()
  PKCS#7: Refactor verify_pkcs7_signature()
  MODSIGN: Export module signature definitions
  ima: initialize the "template" field with the default template
 2019-09-27 19:37:27 -07:00
Linus Torvalds
7bccb9f10c linux-watchdog 5.4-rc1 tag 
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iEYEABECAAYFAl2NtDQACgkQ+iyteGJfRsoHgQCdGLeQMm4IR3jsDdFQk/eTIGfR
 eNIAoN8AY1UTFvWJTxEOhucdAzEAVnHs
 =TdeQ
 -----END PGP SIGNATURE-----

Merge tag 'linux-watchdog-5.4-rc1' of git://www.linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:

 - addition of AST2600, i.MX7ULP and F81803 watchdog support

 - removal of the w90x900 and ks8695 drivers

 - ziirave_wdt improvements

 - small fixes and improvements

* tag 'linux-watchdog-5.4-rc1' of git://www.linux-watchdog.org/linux-watchdog: (51 commits)
  watchdog: f71808e_wdt: Add F81803 support
  watchdog: qcom: remove unnecessary variable from private storage
  watchdog: qcom: support pre-timeout when the bark irq is available
  watchdog: imx_sc: this patch just fixes whitespaces
  watchdog: apseed: Add access_cs0 option for alt-boot
  watchdog: aspeed: add support for dual boot
  watchdog: orion_wdt: use timer1 as a pretimeout
  watchdog: Add i.MX7ULP watchdog support
  dt-bindings: watchdog: Add i.MX7ULP bindings
  dt-bindings: watchdog: sun4i: Add the watchdog clock
  dt-bindings: watchdog: sun4i: Add the watchdog interrupts
  dt-bindings: watchdog: Convert Allwinner watchdog to a schema
  dt-bindings: watchdog: Add YAML schemas for the generic watchdog bindings
  watchdog: aspeed: Add support for AST2600
  dt-bindings: watchdog: Add ast2600 compatible
  watchdog: ziirave_wdt: Update checked I2C functionality mask
  watchdog: ziirave_wdt: Drop ziirave_firm_write_block_data()
  watchdog: ziirave_wdt: Fix DOWNLOAD_START payload
  watchdog: ziirave_wdt: Drop status polling code
  watchdog: ziirave_wdt: Fix RESET_PROCESSOR payload
  ...
 2019-09-27 11:17:38 -07:00
Linus Torvalds
9c9fa97a8e Merge branch 'akpm' (patches from Andrew) 
Merge updates from Andrew Morton:

 - a few hot fixes

 - ocfs2 updates

 - almost all of -mm (slab-generic, slab, slub, kmemleak, kasan,
   cleanups, debug, pagecache, memcg, gup, pagemap, memory-hotplug,
   sparsemem, vmalloc, initialization, z3fold, compaction, mempolicy,
   oom-kill, hugetlb, migration, thp, mmap, madvise, shmem, zswap,
   zsmalloc)

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (132 commits)
  mm/zsmalloc.c: fix a -Wunused-function warning
  zswap: do not map same object twice
  zswap: use movable memory if zpool support allocate movable memory
  zpool: add malloc_support_movable to zpool_driver
  shmem: fix obsolete comment in shmem_getpage_gfp()
  mm/madvise: reduce code duplication in error handling paths
  mm: mmap: increase sockets maximum memory size pgoff for 32bits
  mm/mmap.c: refine find_vma_prev() with rb_last()
  riscv: make mmap allocation top-down by default
  mips: use generic mmap top-down layout and brk randomization
  mips: replace arch specific way to determine 32bit task with generic version
  mips: adjust brk randomization offset to fit generic version
  mips: use STACK_TOP when computing mmap base address
  mips: properly account for stack randomization and stack guard gap
  arm: use generic mmap top-down layout and brk randomization
  arm: use STACK_TOP when computing mmap base address
  arm: properly account for stack randomization and stack guard gap
  arm64, mm: make randomization selected by generic topdown mmap layout
  arm64, mm: move generic mmap layout functions to mm
  arm64: consider stack randomization for mmap base only when necessary
  ...
 2019-09-24 16:10:23 -07:00
Waiman Long
04f768a39d mm, slab: extend slab/shrink to shrink all memcg caches 
Currently, a value of '1" is written to /sys/kernel/slab/<slab>/shrink
file to shrink the slab by flushing out all the per-cpu slabs and free
slabs in partial lists.  This can be useful to squeeze out a bit more
memory under extreme condition as well as making the active object counts
in /proc/slabinfo more accurate.

This usually applies only to the root caches, as the SLUB_MEMCG_SYSFS_ON
option is usually not enabled and "slub_memcg_sysfs=1" not set.  Even if
memcg sysfs is turned on, it is too cumbersome and impractical to manage
all those per-memcg sysfs files in a real production system.

So there is no practical way to shrink memcg caches.  Fix this by enabling
a proper write to the shrink sysfs file of the root cache to scan all the
available memcg caches and shrink them as well.  For a non-root memcg
cache (when SLUB_MEMCG_SYSFS_ON or slub_memcg_sysfs is on), only that
cache will be shrunk when written.

On a 2-socket 64-core 256-thread arm64 system with 64k page after
a parallel kernel build, the the amount of memory occupied by slabs
before shrinking slabs were:

 # grep task_struct /proc/slabinfo
 task_struct        53137  53192   4288   61    4 : tunables    0    0
 0 : slabdata    872    872      0
 # grep "^S[lRU]" /proc/meminfo
 Slab:            3936832 kB
 SReclaimable:     399104 kB
 SUnreclaim:      3537728 kB

After shrinking slabs (by echoing "1" to all shrink files):

 # grep "^S[lRU]" /proc/meminfo
 Slab:            1356288 kB
 SReclaimable:     263296 kB
 SUnreclaim:      1092992 kB
 # grep task_struct /proc/slabinfo
 task_struct         2764   6832   4288   61    4 : tunables    0    0
 0 : slabdata    112    112      0

Link: http://lkml.kernel.org/r/20190723151445.7385-1-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2019-09-24 15:54:07 -07:00
Linus Torvalds
d0b3cfee33 - Core Frameworks 
- Obtain scale type through sysfs
 
  - New Functionality
    - Provide Device Tree functionality; rave-sp-backlight
    - Calculate if scale type is (non-)linear; pwm_bl
 
  - Fix-ups
    - Simplify code; lm3630a_bl
    - Trivial rename/whitespace/typo fixes; lms283gf05
    - Remove superfluous NULL check; tosa_lcd
    - Fix power state initialisation; gpio_backlight
    - List supported file; MAINTAINERS
 
  - Bug Fixes
    - Kconfig - default to not building unless requested; {LED,BACKLIGHT}_CLASS_DEVICE
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAl2JTwMACgkQUa+KL4f8
 d2EC7g/+Pliuvx8dgW+MPX8K6cnap+m7xV8Z9OyyEYHroz+MX7TsBGmJeChoOz9K
 RoFCap5VCtEEyiobDbe8HKpxivY88CdweegYxxBx+Uo9qJRogDv93kqVz3BmHxBm
 v2ShTY+8r2nf6YNN30FXZJSM4WkFqAg2MvM6LXP3R4rPSQ/u2Xp6L5VnzVETl23b
 /ZsP71axvwDNpi437ekUSoraUl9GZnHaINc7/0R/SnRPvZ2aakko7IRNYU0z+NQ+
 unImiBpFjuC1UXDaebd2Bt9ayrM47QkBGLu6LgOTUSg9tFlosvF6Z3TDLo3L2ptD
 Td5SWuTXALFaOv1xmMaylcsA/36D/KRhwnmQMVn/Ld5c/M+l4vOm4YDNgS1G8JY4
 i7KzoD7Z2yhyI3OHYoBGXI8+fmj2qQs+VGThtdhb96LlaHVUibfSlA0i5OjeMKO+
 ddiTy9ksiH+pBcn0YPvHJRNOI0uVmqBMSPkJ1Bdwz6HS58QcL3LvBzHtMVNoGkCK
 iWPPn90hveZmbXAxFIb8a2KRjFz531sReSZh+9dIZ/zOOF5OdyOotMk1zacWCUrt
 Jre1paR4W1VPXf4cE3IcpE6dJeA9DN9niz+9bsMgbr6cYG6xhB7xELrTUCXZn5CR
 C9tNMWuiqUlv0NZHb7CsifQW1bwzw8hTPhDk9VpBb0cFCucLYV0=
 =DSnC
 -----END PGP SIGNATURE-----

Merge tag 'backlight-next-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight

Pull backlight updates from Lee Jones:
 "Core Frameworks
   - Obtain scale type through sysfs

  New Functionality:
   - Provide Device Tree functionality in rave-sp-backlight
   - Calculate if scale type is (non-)linear in pwm_bl

  Fix-ups:
   - Simplify code in lm3630a_bl
   - Trivial rename/whitespace/typo fixes in lms283gf05
   - Remove superfluous NULL check in tosa_lcd
   - Fix power state initialisation in gpio_backlight
   - List supported file in MAINTAINERS

  Bug Fixes:
   - Kconfig - default to not building unless requested in
     {LED,BACKLIGHT}_CLASS_DEVICE"

* tag 'backlight-next-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: pwm_bl: Set scale type for brightness curves specified in the DT
  backlight: pwm_bl: Set scale type for CIE 1931 curves
  backlight: Expose brightness curve type through sysfs
  MAINTAINERS: Add entry for stable backlight sysfs ABI documentation
  backlight: gpio-backlight: Correct initial power state handling
  video: backlight: tosa_lcd: drop check because i2c_unregister_device() is NULL safe
  video: backlight: Drop default m for {LCD,BACKLIGHT_CLASS_DEVICE}
  backlight: lms283gf05: Fix a typo in the description passed to 'devm_gpio_request_one()'
  backlight: lm3630a: Switch to use fwnode_property_count_uXX()
  backlight: rave-sp: Leave initial state and register with correct device
 2019-09-23 19:33:56 -07:00
Linus Torvalds
28de978ba3 remoteproc updates for v5.4 
This exposes the remoteproc's name in sysfs, allows stm32 to enter
 platform standby and provides bug fixes for stm32 and Qualcomm's modem
 remoteproc drivers. Finally it updates MAINTAINERS to reflect the move
 to kernel.org.
 -----BEGIN PGP SIGNATURE-----
 
 iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAl2GUe4bHGJqb3JuLmFu
 ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3Ff4EP/jxQNa8tPTdtmLA5Itdh
 w5nL7XiEmIRlsPBWbmJgu9Ai6ZgQZDMesvzaqraOTXRaaSSeW/H1uKOiE45dZ2eo
 FS2z43knk/zTuWmO6hsto0uFeL2VwIzg/nYqtC//F+S4kRKGn8TLNj6RPCW9XwE1
 UYteRkKth8qapQSL3Y6mF7sLpxsegK7XVurrvguRGIZSZST9zQHsF/Eb8EbdHTZA
 9AibwhDJKQpKnbTPumybV5X3PzHLPMiV+y2RSS7vg/G7fyJuvbvTNQrTvfhfqstQ
 vkTtc1xA0oqPfyU4ii4Dc3Wo15V4TdgcHraScgnBlU+e0D/Pane7F1lDFraQ7FAU
 NMnpjG4oYPzpWNePM+13sFBEvqieAoydQp+oQ9UB9S0CT91VShwhJ8ehxYcg3umC
 ZVVsdRslNtj90iHINKjR1oCbGuetlQCKHpwtTT4ghdehqZeihJRup4P6SX6J9xY0
 nnYQV0JkOnbyaVpbYE53hqcpn+baU6qWoQg1XWnQ+EQbcvuSyDbD5FKSTply1Idj
 G1iREkjIlfUwSRKUiriX1SG+VcEa4BoE9pJL4+VvWgxi0U+kVOoUJSCj9b/U8LXT
 5F3NgUBgjB373RdVLGPhhGcs1DGyNDfOrRSu89BD48NrorwnDAgelED0ALWUDqlS
 k4NvkGoIZdIhTdfVsY2VK/vu
 =T/PI
 -----END PGP SIGNATURE-----

Merge tag 'rproc-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc

Pull remoteproc updates from Bjorn Andersson:
 "This exposes the remoteproc's name in sysfs, allows stm32 to enter
  platform standby and provides bug fixes for stm32 and Qualcomm's modem
  remoteproc drivers. Finally it updates MAINTAINERS to reflect the move
  to kernel.org"

* tag 'rproc-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
  MAINTAINERS: remoteproc: update git tree location
  remoteproc: Remove dev_err() usage after platform_get_irq()
  remoteproc: stm32: manage the get_irq probe defer case
  remoteproc: stm32: clear MCU PDDS at firmware start
  remoteproc: qcom: q6v5-mss: fixup q6v5_pds_enable error handling
  remoteproc: Add a sysfs interface for name
  remoteproc: qcom: Move glink_ssr notification after stop
 2019-09-22 10:55:08 -07:00
Linus Torvalds
fbc246a12a f2fs-for-5.4-rc1 
In this round, we introduced casefolding support in f2fs, and fixed various bugs
 in individual features such as IO alignment, checkpoint=disable, quota, and
 swapfile.
 
 Enhancement:
  - support casefolding w/ enhancement in ext4
  - support fiemap for directory
  - support FS_IO_GET|SET_FSLABEL
 
 Bug fix:
  - fix IO stuck during checkpoint=disable
  - avoid infinite GC loop
  - fix panic/overflow related to IO alignment feature
  - fix livelock in swap file
  - fix discard command leak
  - disallow dio for atomic_write
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE00UqedjCtOrGVvQiQBSofoJIUNIFAl2FL1wACgkQQBSofoJI
 UNIRdg/+M6QNiAazIbqzPXyUUkyZQYR5YKhu2abd49o/g38xjTq1afH0PZpQyDrA
 9RncR4xsW8F241vPLVoCSanfaa+MxN6xHi3TrD8zYtZWxOcPF6v1ETHeUXGTHuJ2
 gqlk+mm+CnY02M6rxW7XwixuXwttT3bF9+cf1YBWRpNoVrR+SjNqgeJS7FmJwXKd
 nGKb+94OxuygL1NUop+LDUo3qRQjc0Sxv/7qj/K4lhqgTjhAxMYT2KvUP/1MZ7U0
 Kh9WIayDXnpoioxMPnt4VEb+JgXfLLFELvQzNjwulk15GIweuJzwVYCBXcRoX0cK
 eRBRmRy/kRp/e0R1gvl3kYrXQC2AC5QTlBVH/0ESwnaukFiUBKB509vH4aqE/vpB
 Krldjfg+uMHkc7XiNBf1boDp713vJ76iRKUDWoVb6H/sPbdJ+jtrnUNeBP8CVpWh
 u31SY1MppnmKhhsoCHQRbhbXO/Z29imBQgF9Tm3IFWImyLY3IU40vFj2fR15gJkL
 X3x/HWxQynSqyqEOwAZrvhCRTvBAIGIVy5292Di1RkqIoh8saxcqiaywgLz1+eVE
 0DCOoh8R6sSbfN/EEh+yZqTxmjo0VGVTw30XVI6QEo4cY5Vfc9u6dN6SRWVRvbjb
 kPb3dKcMrttgbn3fcXU8Jbw1AOor9N6afHaqs0swQJyci2RwJyc=
 =oonf
 -----END PGP SIGNATURE-----

Merge tag 'f2fs-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs

Pull f2fs updates from Jaegeuk Kim:
 "In this round, we introduced casefolding support in f2fs, and fixed
  various bugs in individual features such as IO alignment,
  checkpoint=disable, quota, and swapfile.

  Enhancement:
   - support casefolding w/ enhancement in ext4
   - support fiemap for directory
   - support FS_IO_GET|SET_FSLABEL

  Bug fix:
   - fix IO stuck during checkpoint=disable
   - avoid infinite GC loop
   - fix panic/overflow related to IO alignment feature
   - fix livelock in swap file
   - fix discard command leak
   - disallow dio for atomic_write"

* tag 'f2fs-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (51 commits)
  f2fs: add a condition to detect overflow in f2fs_ioc_gc_range()
  f2fs: fix to add missing F2FS_IO_ALIGNED() condition
  f2fs: fix to fallback to buffered IO in IO aligned mode
  f2fs: fix to handle error path correctly in f2fs_map_blocks
  f2fs: fix extent corrupotion during directIO in LFS mode
  f2fs: check all the data segments against all node ones
  f2fs: Add a small clarification to CONFIG_FS_F2FS_FS_SECURITY
  f2fs: fix inode rwsem regression
  f2fs: fix to avoid accessing uninitialized field of inode page in is_alive()
  f2fs: avoid infinite GC loop due to stale atomic files
  f2fs: Fix indefinite loop in f2fs_gc()
  f2fs: convert inline_data in prior to i_size_write
  f2fs: fix error path of f2fs_convert_inline_page()
  f2fs: add missing documents of reserve_root/resuid/resgid
  f2fs: fix flushing node pages when checkpoint is disabled
  f2fs: enhance f2fs_is_checkpoint_ready()'s readability
  f2fs: clean up __bio_alloc()'s parameter
  f2fs: fix wrong error injection path in inc_valid_block_count()
  f2fs: fix to writeout dirty inode during node flush
  f2fs: optimize case-insensitive lookups
  ...
 2019-09-21 14:26:33 -07:00
Linus Torvalds
56c1e83434 Printk changes for 5.4 
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAl1/akAACgkQUqAMR0iA
 lPLK+Q//fDKalQodEQU2qwP2eLaVwCn5lKu0ab29JwQgA21i5f1AUibPBLvQoHYX
 CyclUSzylz0AO37V1nSWwmDs80TY0nhbgQUURglKQQpkOyZiU/7FtQnVLm2qUUgp
 Jd6hjbFEGQUdfaY21MXzCY5XgYWIPQ7I0exFBd17cbj4ad9mjs28SSLwtK+ogSxL
 S9pfZdB9DWJBeA+d0N9cA6Q4V+u2w4JPcaoYcsPcxbyf3oxxQJZF6FCkaJjXRG+d
 NDzRKfB5+vBJqLFs8/wjiokuGl7YSJwBEe+q02JrSMEBfJb/9+9Uh8NUy6yIFCdL
 DmZaK6zasb9IW6vGmpfVO2fHoSwXYF1Le8YtEzD37+HZRYFnv6+AvpsOgr7hGPpR
 7Ci6U6yEckMxwtKxiPyf+isUV9R8fPWpWnCdz/jVIVTlSP/o3tA8RG8S+cOd66pK
 /TF2DZoMXdwcpB+MgCeCusM/f8jNkAYQPh74SHZQGcY8gdxu/hkv0URU1IVEkdku
 o/+Y2HvgPh2Pd3fqOQU1QKSUCQ0OcVyAt4fg59YpOQTDr6TMZ6xy/TEuFRzzAe8e
 LNLxsGrN1Kqn3JGTOAZgPnbFc5N1eP9/GoGh8+nQaNJe202QjbTUIKEOioOXu5VR
 aFGPvD5aEdlXj+Ms/Igv8qc5/ogXAg4afkqC8Hkk8XaUXHqt3ZI=
 =Ui4A
 -----END PGP SIGNATURE-----

Merge tag 'printk-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk

Pull printk updates from Petr Mladek:

 - Fix off-by-one error when calculating messages that might fit into
   kmsg buffer. It causes occasional omitting of the last message.

 - Add missing pointer check in %pD format modifier handling.

 - Some clean up

* tag 'printk-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
  ABI: Update dev-kmsg documentation to match current kernel behaviour
  printk: Replace strncmp() with str_has_prefix()
  lib/test_printf: Remove obvious comments from %pd and %pD tests
  lib/test_printf: Add test of null/invalid pointer dereference for dentry
  vsprintf: Prevent crash when dereferencing invalid pointers for %pD
  printk: Do not lose last line in kmsg buffer dump
 2019-09-21 09:34:29 -07:00
Linus Torvalds
45824fc0da powerpc updates for 5.4 
- Initial support for running on a system with an Ultravisor, which is software
    that runs below the hypervisor and protects guests against some attacks by
    the hypervisor.
 
  - Support for building the kernel to run as a "Secure Virtual Machine", ie. as
    a guest capable of running on a system with an Ultravisor.
 
  - Some changes to our DMA code on bare metal, to allow devices with medium
    sized DMA masks (> 32 && < 59 bits) to use more than 2GB of DMA space.
 
  - Support for firmware assisted crash dumps on bare metal (powernv).
 
  - Two series fixing bugs in and refactoring our PCI EEH code.
 
  - A large series refactoring our exception entry code to use gas macros, both
    to make it more readable and also enable some future optimisations.
 
 As well as many cleanups and other minor features & fixups.
 
 Thanks to:
   Adam Zerella, Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Aneesh
   Kumar K.V, Anju T Sudhakar, Anshuman Khandual, Balbir Singh, Benjamin
   Herrenschmidt, Cédric Le Goater, Christophe JAILLET, Christophe Leroy,
   Christopher M. Riedl, Christoph Hellwig, Claudio Carvalho, Daniel Axtens,
   David Gibson, David Hildenbrand, Desnes A. Nunes do Rosario, Ganesh Goudar,
   Gautham R. Shenoy, Greg Kurz, Guerney Hunt, Gustavo Romero, Halil Pasic, Hari
   Bathini, Joakim Tjernlund, Jonathan Neuschafer, Jordan Niethe, Leonardo Bras,
   Lianbo Jiang, Madhavan Srinivasan, Mahesh Salgaonkar, Mahesh Salgaonkar,
   Masahiro Yamada, Maxiwell S. Garcia, Michael Anderson, Nathan Chancellor,
   Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Qian Cai, Ram
   Pai, Ravi Bangoria, Reza Arbab, Ryan Grimm, Sam Bobroff, Santosh Sivaraj,
   Segher Boessenkool, Sukadev Bhattiprolu, Thiago Bauermann, Thiago Jung
   Bauermann, Thomas Gleixner, Tom Lendacky, Vasant Hegde.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl2EtEcTHG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgPfsD/9uXyBXn3anI/H08+mk74k5gCsmMQpn
 D442CD/ByogZcccp23yBTlhawtCE03hcHnCLygn0Xgd8a4YvHts/RGHUe3fPHqlG
 bEyZ7jsLVz5ebNZQP7r4eGs2pSzCajwJy2N9HJ/C1ojf15rrfRxoVJtnyhE2wXpm
 DL+6o2K+nUCB3gTQ1Inr3DnWzoGOOUfNTOea2u+J+yfHwGRqOBYpevwqiwy5eelK
 aRjUJCqMTvrzra49MeFwjo0Nt3/Y8UNcwA+JlGdeR8bRuWhFrYmyBRiZEKPaujNO
 5EAfghBBlB0KQCqvF/tRM/c0OftHqK59AMobP9T7u9oOaBXeF/FpZX/iXjzNDPsN
 j9Oo2tKLTu/YVEXqBFuREGP+znANr1Wo4CFyOG8SbvYz0HFjR6XbtRJsS+0e8GWl
 kqX5/ZhYz3lBnKSNe9jgWOrh/J0KCSFigBTEWJT3xsn4YE8x8kK2l9KPqAIldWEP
 sKb2UjGS7v0NKq+NvShH88Q9AeQUEIjTcg/9aDDQDe6FaRQ7KiF8bUxSdwSPi+Fn
 j0lnF6i+1ATWZKuCr85veVi7C5qoe/+MqalnmP7MxULyzgXLLxUgN0SzEYO6QofK
 LQK/VaH2XVr5+M5YAb7K4/NX5gbM3s1bKrCiUy4EyHNvgG7gricYdbz6HgAjKpR7
 oP0rHfgmVYvF1g==
 =WlW+
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "This is a bit late, partly due to me travelling, and partly due to a
  power outage knocking out some of my test systems *while* I was
  travelling.

   - Initial support for running on a system with an Ultravisor, which
     is software that runs below the hypervisor and protects guests
     against some attacks by the hypervisor.

   - Support for building the kernel to run as a "Secure Virtual
     Machine", ie. as a guest capable of running on a system with an
     Ultravisor.

   - Some changes to our DMA code on bare metal, to allow devices with
     medium sized DMA masks (> 32 && < 59 bits) to use more than 2GB of
     DMA space.

   - Support for firmware assisted crash dumps on bare metal (powernv).

   - Two series fixing bugs in and refactoring our PCI EEH code.

   - A large series refactoring our exception entry code to use gas
     macros, both to make it more readable and also enable some future
     optimisations.

  As well as many cleanups and other minor features & fixups.

  Thanks to: Adam Zerella, Alexey Kardashevskiy, Alistair Popple, Andrew
  Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anshuman Khandual,
  Balbir Singh, Benjamin Herrenschmidt, Cédric Le Goater, Christophe
  JAILLET, Christophe Leroy, Christopher M. Riedl, Christoph Hellwig,
  Claudio Carvalho, Daniel Axtens, David Gibson, David Hildenbrand,
  Desnes A. Nunes do Rosario, Ganesh Goudar, Gautham R. Shenoy, Greg
  Kurz, Guerney Hunt, Gustavo Romero, Halil Pasic, Hari Bathini, Joakim
  Tjernlund, Jonathan Neuschafer, Jordan Niethe, Leonardo Bras, Lianbo
  Jiang, Madhavan Srinivasan, Mahesh Salgaonkar, Mahesh Salgaonkar,
  Masahiro Yamada, Maxiwell S. Garcia, Michael Anderson, Nathan
  Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver
  O'Halloran, Qian Cai, Ram Pai, Ravi Bangoria, Reza Arbab, Ryan Grimm,
  Sam Bobroff, Santosh Sivaraj, Segher Boessenkool, Sukadev Bhattiprolu,
  Thiago Bauermann, Thiago Jung Bauermann, Thomas Gleixner, Tom
  Lendacky, Vasant Hegde"

* tag 'powerpc-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (264 commits)
  powerpc/mm/mce: Keep irqs disabled during lockless page table walk
  powerpc: Use ftrace_graph_ret_addr() when unwinding
  powerpc/ftrace: Enable HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
  ftrace: Look up the address of return_to_handler() using helpers
  powerpc: dump kernel log before carrying out fadump or kdump
  docs: powerpc: Add missing documentation reference
  powerpc/xmon: Fix output of XIVE IPI
  powerpc/xmon: Improve output of XIVE interrupts
  powerpc/mm/radix: remove useless kernel messages
  powerpc/fadump: support holes in kernel boot memory area
  powerpc/fadump: remove RMA_START and RMA_END macros
  powerpc/fadump: update documentation about option to release opalcore
  powerpc/fadump: consider f/w load area
  powerpc/opalcore: provide an option to invalidate /sys/firmware/opal/core file
  powerpc/opalcore: export /sys/firmware/opal/core for analysing opal crashes
  powerpc/fadump: update documentation about CONFIG_PRESERVE_FA_DUMP
  powerpc/fadump: add support to preserve crash data on FADUMP disabled kernel
  powerpc/fadump: improve how crashed kernel's memory is reserved
  powerpc/fadump: consider reserved ranges while releasing memory
  powerpc/fadump: make crash memory ranges array allocation generic
  ...
 2019-09-20 11:48:06 -07:00
Linus Torvalds
81160dda9a Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next 
Pull networking updates from David Miller:

 1) Support IPV6 RA Captive Portal Identifier, from Maciej Żenczykowski.

 2) Use bio_vec in the networking instead of custom skb_frag_t, from
    Matthew Wilcox.

 3) Make use of xmit_more in r8169 driver, from Heiner Kallweit.

 4) Add devmap_hash to xdp, from Toke Høiland-Jørgensen.

 5) Support all variants of 5750X bnxt_en chips, from Michael Chan.

 6) More RTNL avoidance work in the core and mlx5 driver, from Vlad
    Buslov.

 7) Add TCP syn cookies bpf helper, from Petar Penkov.

 8) Add 'nettest' to selftests and use it, from David Ahern.

 9) Add extack support to drop_monitor, add packet alert mode and
    support for HW drops, from Ido Schimmel.

10) Add VLAN offload to stmmac, from Jose Abreu.

11) Lots of devm_platform_ioremap_resource() conversions, from
    YueHaibing.

12) Add IONIC driver, from Shannon Nelson.

13) Several kTLS cleanups, from Jakub Kicinski.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1930 commits)
  mlxsw: spectrum_buffers: Add the ability to query the CPU port's shared buffer
  mlxsw: spectrum: Register CPU port with devlink
  mlxsw: spectrum_buffers: Prevent changing CPU port's configuration
  net: ena: fix incorrect update of intr_delay_resolution
  net: ena: fix retrieval of nonadaptive interrupt moderation intervals
  net: ena: fix update of interrupt moderation register
  net: ena: remove all old adaptive rx interrupt moderation code from ena_com
  net: ena: remove ena_restore_ethtool_params() and relevant fields
  net: ena: remove old adaptive interrupt moderation code from ena_netdev
  net: ena: remove code duplication in ena_com_update_nonadaptive_moderation_interval _*()
  net: ena: enable the interrupt_moderation in driver_supported_features
  net: ena: reimplement set/get_coalesce()
  net: ena: switch to dim algorithm for rx adaptive interrupt moderation
  net: ena: add intr_moder_rx_interval to struct ena_com_dev and use it
  net: phy: adin: implement Energy Detect Powerdown mode via phy-tunable
  ethtool: implement Energy Detect Powerdown support via phy-tunable
  xen-netfront: do not assume sk_buff_head list is empty in error handling
  s390/ctcm: Delete unnecessary checks before the macro call “dev_kfree_skb”
  net: ena: don't wake up tx queue when down
  drop_monitor: Better sanitize notified packets
  ...
 2019-09-18 12:34:53 -07:00
Linus Torvalds
8b53c76533 Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 
Pull crypto updates from Herbert Xu:
 "API:
   - Add the ability to abort a skcipher walk.

  Algorithms:
   - Fix XTS to actually do the stealing.
   - Add library helpers for AES and DES for single-block users.
   - Add library helpers for SHA256.
   - Add new DES key verification helper.
   - Add surrounding bits for ESSIV generator.
   - Add accelerations for aegis128.
   - Add test vectors for lzo-rle.

  Drivers:
   - Add i.MX8MQ support to caam.
   - Add gcm/ccm/cfb/ofb aes support in inside-secure.
   - Add ofb/cfb aes support in media-tek.
   - Add HiSilicon ZIP accelerator support.

  Others:
   - Fix potential race condition in padata.
   - Use unbound workqueues in padata"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (311 commits)
  crypto: caam - Cast to long first before pointer conversion
  crypto: ccree - enable CTS support in AES-XTS
  crypto: inside-secure - Probe transform record cache RAM sizes
  crypto: inside-secure - Base RD fetchcount on actual RD FIFO size
  crypto: inside-secure - Base CD fetchcount on actual CD FIFO size
  crypto: inside-secure - Enable extended algorithms on newer HW
  crypto: inside-secure: Corrected configuration of EIP96_TOKEN_CTRL
  crypto: inside-secure - Add EIP97/EIP197 and endianness detection
  padata: remove cpu_index from the parallel_queue
  padata: unbind parallel jobs from specific CPUs
  padata: use separate workqueues for parallel and serial work
  padata, pcrypt: take CPU hotplug lock internally in padata_alloc_possible
  crypto: pcrypt - remove padata cpumask notifier
  padata: make padata_do_parallel find alternate callback CPU
  workqueue: require CPU hotplug read exclusion for apply_workqueue_attrs
  workqueue: unconfine alloc/apply/free_workqueue_attrs()
  padata: allocate workqueue internally
  arm64: dts: imx8mq: Add CAAM node
  random: Use wait_event_freezable() in add_hwgenerator_randomness()
  crypto: ux500 - Fix COMPILE_TEST warnings
  ...
 2019-09-18 12:11:14 -07:00
Linus Torvalds
6cfae0c26b Char/Misc driver patches for 5.4-rc1 
Here is the big char/misc driver pull request for 5.4-rc1.
 
 As has been happening in previous releases, more and more individual
 driver subsystem trees are ending up in here.  Now if that is good or
 bad I can't tell, but hopefully it makes your life easier as it's more
 of an aggregation of trees together to one merge point for you.
 
 Anyway, lots of stuff in here:
 	- habanalabs driver updates
 	- thunderbolt driver updates
 	- misc driver updates
 	- coresight and intel_th hwtracing driver updates
 	- fpga driver updates
 	- extcon driver updates
 	- some dma driver updates
 	- char driver updates
 	- android binder driver updates
 	- nvmem driver updates
 	- phy driver updates
 	- parport driver fixes
 	- pcmcia driver fix
 	- uio driver updates
 	- w1 driver updates
 	- configfs fixes
 	- other assorted driver updates
 
 All of these have been in linux-next for a long time with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXYIT1g8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ym9lwCgrHZlMMvfYNVm6GQ5ge58JJsVTL4AoNatTcL4
 hfVMA6pCHWBjV65xVSf6
 =Tijw
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big char/misc driver pull request for 5.4-rc1.

  As has been happening in previous releases, more and more individual
  driver subsystem trees are ending up in here. Now if that is good or
  bad I can't tell, but hopefully it makes your life easier as it's more
  of an aggregation of trees together to one merge point for you.

  Anyway, lots of stuff in here:
     - habanalabs driver updates
     - thunderbolt driver updates
     - misc driver updates
     - coresight and intel_th hwtracing driver updates
     - fpga driver updates
     - extcon driver updates
     - some dma driver updates
     - char driver updates
     - android binder driver updates
     - nvmem driver updates
     - phy driver updates
     - parport driver fixes
     - pcmcia driver fix
     - uio driver updates
     - w1 driver updates
     - configfs fixes
     - other assorted driver updates

  All of these have been in linux-next for a long time with no reported
  issues"

* tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (200 commits)
  misc: mic: Use PTR_ERR_OR_ZERO rather than its implementation
  habanalabs: correctly cast variable to __le32
  habanalabs: show correct id in error print
  habanalabs: stop using the acronym KMD
  habanalabs: display card name as sensors header
  habanalabs: add uapi to retrieve aggregate H/W events
  habanalabs: add uapi to retrieve device utilization
  habanalabs: Make the Coresight timestamp perpetual
  habanalabs: explicitly set the queue-id enumerated numbers
  habanalabs: print to kernel log when reset is finished
  habanalabs: replace __le32_to_cpu with le32_to_cpu
  habanalabs: replace __cpu_to_le32/64 with cpu_to_le32/64
  habanalabs: Handle HW_IP_INFO if device disabled or in reset
  habanalabs: Expose devices after initialization is done
  habanalabs: improve security in Debug IOCTL
  habanalabs: use default structure for user input in Debug IOCTL
  habanalabs: Add descriptive name to PSOC app status register
  habanalabs: Add descriptive names to PSOC scratch-pad registers
  habanalabs: create two char devices per ASIC
  habanalabs: change device_setup_cdev() to be more generic
  ...
 2019-09-18 11:14:31 -07:00
Linus Torvalds
e6874fc294 Staging/IIO driver patches for 5.4-rc1 
Here is the big staging/iio driver update for 5.4-rc1.
 
 Lots of churn here, with a few driver/filesystems moving out of staging
 finally:
 	- erofs moved out of staging
 	- greybus core code moved out of staging
 
 Along with that, a new filesytem has been added:
 	- extfat
 to provide support for those devices requiring that filesystem (i.e.
 transfer devices to/from windows systems or printers.)
 
 Other than that, there a number of new IIO drivers, and lots and lots
 and lots of staging driver cleanups and minor fixes as people continue
 to dig into those for easy changes.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXYIW0g8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynJgwCgt22YQdsWRrOuJnZp3xpFq/ZSMWAAn0dAgFf5
 SlSTI2nQhbW7jjdShrPR
 =Ra09
 -----END PGP SIGNATURE-----

Merge tag 'staging-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO driver updates from Greg KH:
 "Here is the big staging/iio driver update for 5.4-rc1.

  Lots of churn here, with a few driver/filesystems moving out of
  staging finally:

     - erofs moved out of staging

     - greybus core code moved out of staging

  Along with that, a new filesytem has been added:

     - extfat

  to provide support for those devices requiring that filesystem (i.e.
  transfer devices to/from windows systems or printers)

  Other than that, there a number of new IIO drivers, and lots and lots
  and lots of staging driver cleanups and minor fixes as people continue
  to dig into those for easy changes.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (453 commits)
  Staging: gasket: Use temporaries to reduce line length.
  Staging: octeon: Avoid several usecases of strcpy
  staging: vhciq_core: replace snprintf with scnprintf
  staging: wilc1000: avoid twice IRQ handler execution for each single interrupt
  staging: wilc1000: remove unused interrupt status handling code
  staging: fbtft: make several arrays static const, makes object smaller
  staging: rtl8188eu: make two arrays static const, makes object smaller
  staging: rtl8723bs: core: Remove Macro "IS_MAC_ADDRESS_BROADCAST"
  dt-bindings: anybus-controller: move to staging/ tree
  staging: emxx_udc: remove local TRUE/FALSE definition
  staging: wilc1000: look for rtc_clk clock
  staging: dt-bindings: wilc1000: add optional rtc_clk property
  staging: nvec: make use of devm_platform_ioremap_resource
  staging: exfat: drop unused function parameter
  Staging: exfat: Avoid use of strcpy
  staging: exfat: use integer constants
  staging: exfat: cleanup spacing for casts
  staging: exfat: cleanup spacing for operators
  staging: rtl8723bs: hal: remove redundant variable n
  staging: pi433: Fix typo in documentation
  ...
 2019-09-18 11:05:34 -07:00
Linus Torvalds
77dcfe2b9e Power management updates for 5.4-rc1 
- Rework the main suspend-to-idle control flow to avoid repeating
    "noirq" device resume and suspend operations in case of spurious
    wakeups from the ACPI EC and decouple the ACPI EC wakeups support
    from the LPS0 _DSM support (Rafael Wysocki).
 
  - Extend the wakeup sources framework to expose wakeup sources as
    device objects in sysfs (Tri Vo, Stephen Boyd).
 
  - Expose system suspend statistics in sysfs (Kalesh Singh).
 
  - Introduce a new haltpoll cpuidle driver and a new matching
    governor for virtualized guests wanting to do guest-side polling
    in the idle loop (Marcelo Tosatti, Joao Martins, Wanpeng Li,
    Stephen Rothwell).
 
  - Fix the menu and teo cpuidle governors to allow the scheduler tick
    to be stopped if PM QoS is used to limit the CPU idle state exit
    latency in some cases (Rafael Wysocki).
 
  - Increase the resolution of the play_idle() argument to microseconds
    for more fine-grained injection of CPU idle cycles (Daniel Lezcano).
 
  - Switch over some users of cpuidle notifiers to the new QoS-based
    frequency limits and drop the CPUFREQ_ADJUST and CPUFREQ_NOTIFY
    policy notifier events (Viresh Kumar).
 
  - Add new cpufreq driver based on nvmem for sun50i (Yangtao Li).
 
  - Add support for MT8183 and MT8516 to the mediatek cpufreq driver
    (Andrew-sh.Cheng, Fabien Parent).
 
  - Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson
    Huang).
 
  - Add qcs404 to cpufreq-dt-platdev blacklist (Jorge Ramirez-Ortiz).
 
  - Update the qcom cpufreq driver (among other things, to make it
    easier to extend and to use kryo cpufreq for other nvmem-based
    SoCs) and add qcs404 support to it  (Niklas Cassel, Douglas
    RAILLARD, Sibi Sankar, Sricharan R).
 
  - Fix assorted issues and make assorted minor improvements in the
    cpufreq code (Colin Ian King, Douglas RAILLARD, Florian Fainelli,
    Gustavo Silva, Hariprasad Kelam).
 
  - Add new devfreq driver for NVidia Tegra20 (Dmitry Osipenko, Arnd
    Bergmann).
 
  - Add new Exynos PPMU events to devfreq events and extend that
    mechanism (Lukasz Luba).
 
  - Fix and clean up the exynos-bus devfreq driver (Kamil Konieczny).
 
  - Improve devfreq documentation and governor code, fix spelling
    typos in devfreq (Ezequiel Garcia, Krzysztof Kozlowski, Leonard
    Crestez, MyungJoo Ham, Gaël PORTAY).
 
  - Add regulators enable and disable to the OPP (operating performance
    points) framework (Kamil Konieczny).
 
  - Update the OPP framework to support multiple opp-suspend properties
    (Anson Huang).
 
  - Fix assorted issues and make assorted minor improvements in the OPP
    code (Niklas Cassel, Viresh Kumar, Yue Hu).
 
  - Clean up the generic power domains (genpd) framework (Ulf Hansson).
 
  - Clean up assorted pieces of power management code and documentation
    (Akinobu Mita, Amit Kucheria, Chuhong Yuan).
 
  - Update the pm-graph tool to version 5.5 including multiple fixes
    and improvements (Todd Brandt).
 
  - Update the cpupower utility (Benjamin Weis, Geert Uytterhoeven,
    Sébastien Szymanski).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl2ArZ4SHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxgfYQAK80hs43vWQDmp7XKrN4pQe8+qYULAGO
 fBfrFl+NG9y/cnuqnt3NtA8MoyNsMMkMLkpkEDMfSbYqqH5ehEzX5+uGJWiWx8+Y
 oH5KU8MH7Tj/utYaalGzDt0AHfHZDIGC0NCUNQJVtE/4mOANFabwsCwscp4MrD5Q
 WjFN8U4BrsmWgJdZ/U9QIWcDZ0I+1etCF+rZG2yxSv31FMq2Zk/Qm4YyobqCvQFl
 TR9rxl08wqUmIYIz5cDjt/3AKH7NLLDqOTstbCL7cmufM5XPFc1yox69xc89UrIa
 4AMgmDp7SMwFG/gdUPof0WQNmx7qxmiRAPleAOYBOZW/8jPNZk2y+RhM5NeF72m7
 AFqYiuxqatkSb4IsT8fLzH9IUZOdYr8uSmoMQECw+MHdApaKFjFV8Lb/qx5+AwkD
 y7pwys8dZSamAjAf62eUzJDWcEwkNrujIisGrIXrVHb7ISbweskMOmdAYn9p4KgP
 dfRzpJBJ45IaMIdbaVXNpg3rP7Apfs7X1X+/ZhG6f+zHH3zYwr8Y81WPqX8WaZJ4
 qoVCyxiVWzMYjY2/1lzjaAdqWojPWHQ3or3eBaK52DouyG3jY6hCDTLwU7iuqcCX
 jzAtrnqrNIKufvaObEmqcmYlIIOFT7QaJCtGUSRFQLfSon8fsVSR7LLeXoAMUJKT
 JWQenuNaJngK
 =TBDQ
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These include a rework of the main suspend-to-idle code flow (related
  to the handling of spurious wakeups), a switch over of several users
  of cpufreq notifiers to QoS-based limits, a new devfreq driver for
  Tegra20, a new cpuidle driver and governor for virtualized guests, an
  extension of the wakeup sources framework to expose wakeup sources as
  device objects in sysfs, and more.

  Specifics:

   - Rework the main suspend-to-idle control flow to avoid repeating
     "noirq" device resume and suspend operations in case of spurious
     wakeups from the ACPI EC and decouple the ACPI EC wakeups support
     from the LPS0 _DSM support (Rafael Wysocki).

   - Extend the wakeup sources framework to expose wakeup sources as
     device objects in sysfs (Tri Vo, Stephen Boyd).

   - Expose system suspend statistics in sysfs (Kalesh Singh).

   - Introduce a new haltpoll cpuidle driver and a new matching governor
     for virtualized guests wanting to do guest-side polling in the idle
     loop (Marcelo Tosatti, Joao Martins, Wanpeng Li, Stephen Rothwell).

   - Fix the menu and teo cpuidle governors to allow the scheduler tick
     to be stopped if PM QoS is used to limit the CPU idle state exit
     latency in some cases (Rafael Wysocki).

   - Increase the resolution of the play_idle() argument to microseconds
     for more fine-grained injection of CPU idle cycles (Daniel
     Lezcano).

   - Switch over some users of cpuidle notifiers to the new QoS-based
     frequency limits and drop the CPUFREQ_ADJUST and CPUFREQ_NOTIFY
     policy notifier events (Viresh Kumar).

   - Add new cpufreq driver based on nvmem for sun50i (Yangtao Li).

   - Add support for MT8183 and MT8516 to the mediatek cpufreq driver
     (Andrew-sh.Cheng, Fabien Parent).

   - Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson
     Huang).

   - Add qcs404 to cpufreq-dt-platdev blacklist (Jorge Ramirez-Ortiz).

   - Update the qcom cpufreq driver (among other things, to make it
     easier to extend and to use kryo cpufreq for other nvmem-based
     SoCs) and add qcs404 support to it (Niklas Cassel, Douglas
     RAILLARD, Sibi Sankar, Sricharan R).

   - Fix assorted issues and make assorted minor improvements in the
     cpufreq code (Colin Ian King, Douglas RAILLARD, Florian Fainelli,
     Gustavo Silva, Hariprasad Kelam).

   - Add new devfreq driver for NVidia Tegra20 (Dmitry Osipenko, Arnd
     Bergmann).

   - Add new Exynos PPMU events to devfreq events and extend that
     mechanism (Lukasz Luba).

   - Fix and clean up the exynos-bus devfreq driver (Kamil Konieczny).

   - Improve devfreq documentation and governor code, fix spelling typos
     in devfreq (Ezequiel Garcia, Krzysztof Kozlowski, Leonard Crestez,
     MyungJoo Ham, Gaël PORTAY).

   - Add regulators enable and disable to the OPP (operating performance
     points) framework (Kamil Konieczny).

   - Update the OPP framework to support multiple opp-suspend properties
     (Anson Huang).

   - Fix assorted issues and make assorted minor improvements in the OPP
     code (Niklas Cassel, Viresh Kumar, Yue Hu).

   - Clean up the generic power domains (genpd) framework (Ulf Hansson).

   - Clean up assorted pieces of power management code and documentation
     (Akinobu Mita, Amit Kucheria, Chuhong Yuan).

   - Update the pm-graph tool to version 5.5 including multiple fixes
     and improvements (Todd Brandt).

   - Update the cpupower utility (Benjamin Weis, Geert Uytterhoeven,
     Sébastien Szymanski)"

* tag 'pm-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (126 commits)
  cpuidle-haltpoll: Enable kvm guest polling when dedicated physical CPUs are available
  cpuidle-haltpoll: do not set an owner to allow modunload
  cpuidle-haltpoll: return -ENODEV on modinit failure
  cpuidle-haltpoll: set haltpoll as preferred governor
  cpuidle: allow governor switch on cpuidle_register_driver()
  PM: runtime: Documentation: add runtime_status ABI document
  pm-graph: make setVal unbuffered again for python2 and python3
  powercap: idle_inject: Use higher resolution for idle injection
  cpuidle: play_idle: Increase the resolution to usec
  cpuidle-haltpoll: vcpu hotplug support
  cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist
  cpufreq: qcom: Add support for qcs404 on nvmem driver
  cpufreq: qcom: Refactor the driver to make it easier to extend
  cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs
  dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR
  dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain
  Documentation: cpufreq: Update policy notifier documentation
  cpufreq: Remove CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events
  PM / Domains: Verify PM domain type in dev_pm_genpd_set_performance_state()
  PM / Domains: Simplify genpd_lookup_dev()
  ...
 2019-09-17 19:15:14 -07:00
Linus Torvalds
7c672abc12 It's a somewhat calmer cycle for docs this time, as the churn of the mass 
RST conversion is happily mostly behind us.
 
  - A new document on reproducible builds.
 
  - We finally got around to zapping the documentation for hardware support
    that was removed in 2004; one doesn't want to rush these things.
 
  - The usual assortment of fixes, typo corrections, etc.
 
 You'll still find a handful of annoying conflicts against other trees,
 mostly tied to the last RST conversions; resolutions are straightforward
 and the linux-next ones are good.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl1/J4IACgkQF0NaE2wM
 flhYogf9EgYozCe8RocSq+JjJpZOSFjIGDQv+GwTjOBIdqgO9tSIaY/p0wSkYKil
 jYXyMDF+Xwr8podsUep2F7akBM7j9XJ+XBGJcfOna0ypC9xoejMgWt9fU3YvaWge
 dQJxIQ/iwkDlKNx6uOYgKysLUWFS0EP/nzPhqBo4bZZzhugvrR46D/nQqFNmGihd
 l9yLalJtP5mC0XRUv3hpdAFFFKxdC0R3BGOel2V+slSClp0LEgpdMAuMaKydEDI3
 Ch9ZpIp8fB8kqONCs9/X6083WRsDOMe28KgeGrGHo4Jla6u51QBLQjSVKttFv7xk
 051yNJwDWMxgl+A4gyNLDPXM7Gd7HQ==
 =v4dp
 -----END PGP SIGNATURE-----

Merge tag 'docs-5.4' of git://git.lwn.net/linux

Pull documentation updates from Jonathan Corbet:
 "It's a somewhat calmer cycle for docs this time, as the churn of the
  mass RST conversion is happily mostly behind us.

   - A new document on reproducible builds.

   - We finally got around to zapping the documentation for hardware
     support that was removed in 2004; one doesn't want to rush these
     things.

   - The usual assortment of fixes, typo corrections, etc"

* tag 'docs-5.4' of git://git.lwn.net/linux: (67 commits)
  Documentation: kbuild: Add document about reproducible builds
  docs: printk-formats: Stop encouraging use of unnecessary %h[xudi] and %hh[xudi]
  Documentation: Add "earlycon=sbi" to the admin guide
  doc🔒 remove reference to clever use of read-write lock
  devices.txt: improve entry for comedi (char major 98)
  docs: mtd: Update spi nor reference driver
  doc: arm64: fix grammar dtb placed in no attributes region
  Documentation: sysrq: don't recommend 'S' 'U' before 'B'
  mailmap: Update email address for Quentin Perret
  docs: ftrace: clarify when tracing is disabled by the trace file
  docs: process: fix broken link
  Documentation/arm/samsung-s3c24xx: Remove stray U+FEFF character to fix title
  Documentation/arm/sa1100/assabet: Fix 'make assabet_defconfig' command
  Documentation/arm/sa1100: Remove some obsolete documentation
  docs/zh_CN: update Chinese howto.rst for latexdocs making
  Documentation: virt: Fix broken reference to virt tree's index
  docs: Fix typo on pull requests guide
  kernel-doc: Allow anonymous enum
  Documentation: sphinx: Don't parse socket() as identifier reference
  Documentation: sphinx: Add missing comma to list of strings
  ...
 2019-09-17 16:22:26 -07:00
Rafael J. Wysocki
d281706369 Merge branch 'pm-sleep' 
* pm-sleep: (29 commits)
  ACPI: PM: s2idle: Always set up EC GPE for system wakeup
  ACPI: PM: s2idle: Avoid rearming SCI for wakeup unnecessarily
  PM / wakeup: Unexport wakeup_source_sysfs_{add,remove}()
  PM / wakeup: Register wakeup class kobj after device is added
  PM / wakeup: Fix sysfs registration error path
  PM / wakeup: Show wakeup sources stats in sysfs
  PM / wakeup: Use wakeup_source_register() in wakelock.c
  PM / wakeup: Drop wakeup_source_init(), wakeup_source_prepare()
  PM: sleep: Replace strncmp() with str_has_prefix()
  PM: suspend: Fix platform_suspend_prepare_noirq()
  intel-hid: Disable button array during suspend-to-idle
  intel-hid: intel-vbtn: Avoid leaking wakeup_mode set
  ACPI: PM: s2idle: Execute LPS0 _DSM functions with suspended devices
  ACPI: EC: PM: Make acpi_ec_dispatch_gpe() print debug message
  ACPI: EC: PM: Consolidate some code depending on PM_SLEEP
  ACPI: PM: s2idle: Eliminate acpi_sleep_no_ec_events()
  ACPI: PM: s2idle: Switch EC over to polling during "noirq" suspend
  ACPI: PM: s2idle: Add acpi.sleep_no_lps0 module parameter
  ACPI: PM: s2idle: Rearrange lps0_device_attach()
  PM/sleep: Expose suspend stats in sysfs
  ...
 2019-09-17 09:36:34 +02:00
Ivan Mikhaylov
ebdc0f5817 watchdog: apseed: Add access_cs0 option for alt-boot 
The option for the ast2400/2500 to get access to CS0 at runtime.

Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20190828102402.13155-5-i.mikhaylov@yadro.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
 2019-09-17 08:59:13 +02:00
Linus Torvalds
cc9b499a1f Merge branch 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 
Pull EFI updates from Ingo Molnar:

 - refactor the EFI config table handling across architectures

 - add support for the Dell EMC OEM config table

 - include AER diagnostic output to CPER handling of fatal PCIe errors

* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: cper: print AER info of PCIe fatal error
  efi: Export Runtime Configuration Interface table to sysfs
  efi: ia64: move SAL systab handling out of generic EFI code
  efi/x86: move UV_SYSTAB handling into arch/x86
  efi: x86: move efi_is_table_address() into arch/x86
 2019-09-16 16:47:38 -07:00
Arnd Bergmann
3dc8dcb02f Qualcomm ARM Based Driver Updates for v5.4 
* Add AOSS QMP support
 * Various fixups for Qualcomm SCM
 * Add socinfo driver
 * Add SoC serial number attribute and associated APIs
 * Add SM8150 and SC7180 support in Qualcomm SCM
 * Fixup max processor count in SMEM
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJdZpm4AAoJEFKiBbHx2RXV6UEP/1S0B3yKF+/HBylghMBgYI21
 P0qWH0cGSYioCLYEPn1qZjftBGSg9K3e31IoFk/mSDy0rt4wbg53ribkL6tE7M+c
 ZLZfOs06stGLg6Nf/oLz2SbN2bQsIZBGJoVgp58N/z4Qymspvf7Vg4y9VCy/dzqe
 R5bQZhYNWJNzv2q2vju06ACCkQgkRVfIuQSI+69t3bbeWJrHatVrPRHP8Xi8kaTh
 /nI7hkO9ouMC6Uda8/aeGoo5V/xaC+rankp9ttdFeHNVXMgk6c3v5rD4fSYw+CVY
 Icw7MCKGF1QPjHkLofTZsqpADHabUwu/NmDV1D5c1A/qu0gBocPSI1o1XbChlceS
 E/3oO9DJQoNxJOKPxMzZwtVRAeGGrk7/PflkBY+/55XNXO4zasD0Kbi3/ReUokBJ
 G5zyN/Lm/gsSfsyiJBFMN02mxbKixlSd/XDp/gClLf7f1QXV+IFyeiDkyMxWH00b
 gM4c8hJalWJ2jKi9JDA7GVJD9N+8Q76+Z4HmGiyJJZXtLrVB+ehQFrSOxt97qvBE
 4KeZUTfSON++8LpWeP3zVSB1Kox6+cCGQEK0VmwhEHOjE4gg8iV/YIKznwx7clTn
 XepzT4K49xO5NQ9h9g2rXNdzvuXvVrKA/CuCtv6/24aSifHHpFroCIewcKZa++/m
 Pv3LzPbX4a8d5Hq/qP0o
 =MsUS
 -----END PGP SIGNATURE-----

Merge tag 'qcom-drivers-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers

Qualcomm ARM Based Driver Updates for v5.4

* Add AOSS QMP support
* Various fixups for Qualcomm SCM
* Add socinfo driver
* Add SoC serial number attribute and associated APIs
* Add SM8150 and SC7180 support in Qualcomm SCM
* Fixup max processor count in SMEM

* tag 'qcom-drivers-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  soc: qcom: aoss: Add AOSS QMP support
  dt-bindings: soc: qcom: aoss: Add SM8150 and SC7180 support
  dt-bindings: firmware: scm: Add SM8150 and SC7180 support
  dt-bindings: firmware: scm: re-order compatible list
  soc: qcom: smem: Update max processor count
  soc: qcom: socinfo: Annotate switch cases with fall through
  soc: qcom: Extend AOSS QMP driver to support resources that are used to wake up the SoC.
  soc: qcom: socinfo: Expose image information
  soc: qcom: socinfo: Expose custom attributes
  soc: qcom: Add socinfo driver
  base: soc: Export soc_device_register/unregister APIs
  base: soc: Add serial_number attribute to soc
  firmware: qcom_scm: Cleanup code in qcom_scm_assign_mem()
  firmware: qcom_scm: Fix some typos in docs and printks
  firmware: qcom_scm: Use proper types for dma mappings
 2019-09-12 13:46:20 +02:00
Mircea Caprioru
42776c14c6 staging: iio: adc: ad7192: Add system calibration support 
This patch will add a system calibration attribute for each channel. Using
this option the user will have the ability to calibrate each channel for
zero scale and full scale. It uses the iio_chan_spec_ext_info and IIO_ENUM
to implement the functionality.

Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2019-09-08 10:35:56 +01:00
Mircea Caprioru
b73b93a2af iio: adc: ad7192: Add sysfs ABI documentation 
Add initial ABI documentation for ad7192 adc sysfs interfaces.

Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2019-09-08 10:34:49 +01:00
James Byrne
085a3a8fdf ABI: Update dev-kmsg documentation to match current kernel behaviour 
Commit 5aa068ea40 ("printk: remove games with previous record flags")
abolished the practice of setting the log flag to 'c' for the first
continuation line and '+' for subsequent lines. Now all continuation
lines are flagged with 'c' and '+' is never used.

Update the 'dev-kmsg' documentation to remove the reference to the
obsolete '+' flag. In addition, state explicitly that only 8 bits of the
<N> syslog prefix are used for the facility number when writing to
/dev/kmsg.

Link: http://lkml.kernel.org/r/0102016cf1b26630-8e9b337b-da49-43c6-b028-4250c2fac3ef-000000@eu-west-1.amazonses.com
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
 2019-09-06 16:26:36 +02:00
Akinobu Mita
0760bb9ac9 PM: runtime: Documentation: add runtime_status ABI document 
/sys/devices/.../power/runtime_status is introduced by commit c92445fadb
("PM / Runtime: Add sysfs debug files").  Then commit 0fcb4eef82 ("PM /
Runtime: Make runtime_status attribute not debug-only (v. 2)") made the
runtime_status attribute available without CONFIG_PM_ADVANCED_DEBUG.

This adds missing runtime_status ABI document.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2019-09-06 14:11:13 +02:00
Oded Gabbay
209257feab habanalabs: power management through sysfs is only for GOYA 
The ability of setting power management properties by the system
administrator (through sysfs properties) is only relevant for the GOYA
ASIC. Therefore, move the relevant sysfs properties to the GOYA sysfs
specific file, to make the properties appear in sysfs only for GOYA cards.

Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
 2019-09-05 14:55:26 +03:00
Oded Gabbay
68b8819daf habanalabs: remove write_open_cnt property 
This property has attempted to show the number of open file descriptors on
the device. This was a stupid and futile attempt so remove this property
completely.

Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
 2019-09-05 14:55:25 +03:00
Marek Behún
7db93df1c8 firmware: turris-mox-rwtm: Add sysfs documentation 
Add sysfs ABI documentation for the sysfs files created by the
turris-mox-rwtm driver.

Link: https://lore.kernel.org/r/20190822014318.19478-4-marek.behun@nic.cz
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2019-09-04 17:32:28 +02:00
Richard Gong
feef87e911 firmware: rsu: document sysfs interface 
Describe Intel Stratix10 Remote System Update (RSU) device attributes

Signed-off-by: Richard Gong <richard.gong@intel.com>
Reviewed-by: Alan Tull <atull@kernel.org>
Link: https://lore.kernel.org/r/1567516701-26026-4-git-send-email-richard.gong@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2019-09-04 13:31:28 +02:00
Wu Hao
cb3c2c47e3 fpga: dfl: fme: add global error reporting support 
This patch adds support for global error reporting for FPGA
Management Engine (FME), it introduces sysfs interfaces to
report different error detected by the hardware, and allow
user to clear errors or inject error for testing purpose.

Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Ananda Ravuri <ananda.ravuri@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Acked-by: Alan Tull <atull@kernel.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
 2019-09-03 19:35:41 -07:00
Wu Hao
44d247534f fpga: dfl: afu: add error reporting support. 
Error reporting is one important private feature, it reports error
detected on port and accelerated function unit (AFU). It introduces
several sysfs interfaces to allow userspace to check and clear
errors detected by hardware.

Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Acked-by: Alan Tull <atull@kernel.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
 2019-09-03 19:35:41 -07:00
Wu Hao
f09991adfb fpga: dfl: afu: add userclock sysfs interfaces. 
This patch introduces userclock sysfs interfaces for AFU, user
could use these interfaces for clock setting to AFU.

Please note that, this is only working for port header feature
with revision 0, for later revisions, userclock setting is moved
to a separated private feature, so one revision sysfs interface
is exposed to userspace application for this purpose too.

Signed-off-by: Ananda Ravuri <ananda.ravuri@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Acked-by: Alan Tull <atull@kernel.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
 2019-09-03 19:35:41 -07:00
Matthias Kaehlcke
d55c028f8b backlight: Expose brightness curve type through sysfs 
Backlight brightness curves can have different shapes. The two main
types are linear and non-linear curves. The human eye doesn't
perceive linearly increasing/decreasing brightness as linear (see
also 88ba95bedb "backlight: pwm_bl: Compute brightness of LED
linearly to human eye"), hence many backlights use non-linear (often
logarithmic) brightness curves. The type of curve currently is opaque
to userspace, so userspace often uses more or less reliable heuristics
(like the number of brightness levels) to decide whether to treat a
backlight device as linear or non-linear.

Export the type of the brightness curve via the new sysfs attribute
'scale'. The value of the attribute can be 'linear', 'non-linear' or
'unknown'. For devices that don't provide information about the scale
of their brightness curve the value of the 'scale' attribute is 'unknown'.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
 2019-09-02 15:55:03 +01:00
Ryan Grimm
734560ac39 powerpc/pseries/svm: Export guest SVM status to user space via sysfs 
User space might want to know it's running in a secure VM.  It can't do
a mfmsr because mfmsr is a privileged instruction.

The solution here is to create a cpu attribute:

/sys/devices/system/cpu/svm

which will read 0 or 1 based on the S bit of the current CPU.

Signed-off-by: Ryan Grimm <grimm@linux.vnet.ibm.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190820021326.6884-12-bauerman@linux.ibm.com
 2019-08-30 09:55:41 +10:00
Suman Anna
6ed756aa01 remoteproc: Add a sysfs interface for name 
This patch adds a sysfs interface that provides the name of the
remote processor to userspace. This allows the userspace to identify
a remote processor as the remoteproc devices themselves are created
based on probe order and can change from one boot to another or
at runtime.

The name is made available in debugfs originally, and is being
retained for now. This can be cleaned up after couple of releases
once users get familiar with the new interface.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
 2019-08-26 14:50:16 -07:00
Daniel Rosenberg
5aba54302a f2fs: include charset encoding information in the superblock 
Add charset encoding to f2fs to support casefolding. It is modeled after
the same feature introduced in commit c83ad55eaa ("ext4: include charset
encoding information in the superblock")

Currently this is not compatible with encryption, similar to the current
ext4 imlpementation. This will change in the future.

>From the ext4 patch:
"""
The s_encoding field stores a magic number indicating the encoding
format and version used globally by file and directory names in the
filesystem.  The s_encoding_flags defines policies for using the charset
encoding, like how to handle invalid sequences.  The magic number is
mapped to the exact charset table, but the mapping is specific to ext4.
Since we don't have any commitment to support old encodings, the only
encoding I am supporting right now is utf8-12.1.0.

The current implementation prevents the user from enabling encoding and
per-directory encryption on the same filesystem at the same time.  The
incompatibility between these features lies in how we do efficient
directory searches when we cannot be sure the encryption of the user
provided fname will match the actual hash stored in the disk without
decrypting every directory entry, because of normalization cases.  My
quickest solution is to simply block the concurrent use of these
features for now, and enable it later, once we have a better solution.
"""

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
 2019-08-23 07:57:13 -07:00
Tri Vo
c8377adfa7 PM / wakeup: Show wakeup sources stats in sysfs 
Add an ID and a device pointer to 'struct wakeup_source'. Use them to to
expose wakeup sources statistics in sysfs under
/sys/class/wakeup/wakeup<ID>/*.

Co-developed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Co-developed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Tri Vo <trong@android.com>
Tested-by: Kalesh Singh <kaleshsingh@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2019-08-21 00:20:40 +02:00
Marek Behún
2091b417aa bus: moxtet: Add sysfs and debugfs documentation 
Add sysfs ABI documentation for the attribute files module_id and
module_name

Add debugfs ABI documentation for reading input from the shift registers
and reading last written output or write output to the shift registers.

Link: https://lore.kernel.org/r/20190812161118.21476-4-marek.behun@nic.cz
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2019-08-14 15:30:49 +02:00
Andrii Nakryiko
7fd785685e btf: rename /sys/kernel/btf/kernel into /sys/kernel/btf/vmlinux 
Expose kernel's BTF under the name vmlinux to be more uniform with using
kernel module names as file names in the future.

Fixes: 341dfcf8d7 ("btf: expose BTF info through sysfs")
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
 2019-08-13 23:19:42 +02:00
Andrii Nakryiko
341dfcf8d7 btf: expose BTF info through sysfs 
Make .BTF section allocated and expose its contents through sysfs.

/sys/kernel/btf directory is created to contain all the BTFs present
inside kernel. Currently there is only kernel's main BTF, represented as
/sys/kernel/btf/kernel file. Once kernel modules' BTFs are supported,
each module will expose its BTF as /sys/kernel/btf/<module-name> file.

Current approach relies on a few pieces coming together:
1. pahole is used to take almost final vmlinux image (modulo .BTF and
   kallsyms) and generate .BTF section by converting DWARF info into
   BTF. This section is not allocated and not mapped to any segment,
   though, so is not yet accessible from inside kernel at runtime.
2. objcopy dumps .BTF contents into binary file and subsequently
   convert binary file into linkable object file with automatically
   generated symbols _binary__btf_kernel_bin_start and
   _binary__btf_kernel_bin_end, pointing to start and end, respectively,
   of BTF raw data.
3. final vmlinux image is generated by linking this object file (and
   kallsyms, if necessary). sysfs_btf.c then creates
   /sys/kernel/btf/kernel file and exposes embedded BTF contents through
   it. This allows, e.g., libbpf and bpftool access BTF info at
   well-known location, without resorting to searching for vmlinux image
   on disk (location of which is not standardized and vmlinux image
   might not be even available in some scenarios, e.g., inside qemu
   during testing).

Alternative approach using .incbin assembler directive to embed BTF
contents directly was attempted but didn't work, because sysfs_proc.o is
not re-compiled during link-vmlinux.sh stage. This is required, though,
to update embedded BTF data (initially empty data is embedded, then
pahole generates BTF info and we need to regenerate sysfs_btf.o with
updated contents, but it's too late at that point).

If BTF couldn't be generated due to missing or too old pahole,
sysfs_btf.c handles that gracefully by detecting that
_binary__btf_kernel_bin_start (weak symbol) is 0 and not creating
/sys/kernel/btf at all.

v2->v3:
- added Documentation/ABI/testing/sysfs-kernel-btf (Greg K-H);
- created proper kobject (btf_kobj) for btf directory (Greg K-H);
- undo v2 change of reusing vmlinux, as it causes extra kallsyms pass
  due to initially missing  __binary__btf_kernel_bin_{start/end} symbols;

v1->v2:
- allow kallsyms stage to re-use vmlinux generated by gen_btf();

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
 2019-08-13 16:14:15 +02:00
Zhou Wang
8201fdf49f Documentation: Add debugfs doc for hisi_zip 
Add debugfs descriptions for HiSilicon ZIP and QM driver.

Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
 2019-08-09 15:11:56 +10:00
Narendra K
1c5fecb612 efi: Export Runtime Configuration Interface table to sysfs 
System firmware advertises the address of the 'Runtime
Configuration Interface table version 2 (RCI2)' via
an EFI Configuration Table entry. This code retrieves the RCI2
table from the address and exports it to sysfs as a binary
attribute 'rci2' under /sys/firmware/efi/tables directory.
The approach adopted is similar to the attribute 'DMI' under
/sys/firmware/dmi/tables.

RCI2 table contains BIOS HII in XML format and is used to populate
BIOS setup page in Dell EMC OpenManage Server Administrator tool.
The BIOS setup page contains BIOS tokens which can be configured.

Signed-off-by: Narendra K <Narendra.K@dell.com>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
 2019-08-08 11:10:25 +03:00
Thiago Jung Bauermann
9044d627fd ima: Add modsig appraise_type option for module-style appended signatures 
Introduce the modsig keyword to the IMA policy syntax to specify that
a given hook should expect the file to have the IMA signature appended
to it. Here is how it can be used in a rule:

appraise func=KEXEC_KERNEL_CHECK appraise_type=imasig|modsig

With this rule, IMA will accept either a signature stored in the extended
attribute or an appended signature.

For now, the rule above will behave exactly the same as if
appraise_type=imasig was specified. The actual modsig implementation
will be introduced separately.

Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
 2019-08-05 18:40:21 -04:00
Bjorn Andersson
9aebf4de22 base: soc: Add serial_number attribute to soc 
Add new attribute named "serial_number" as a standard interface for
user space to acquire the serial number of the device.

For ST-Ericsson SoCs this is exposed by the cryptically named "soc_id"
attribute, but this provides a human readable standardized name for this
property.

Tested-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vaishali Thakkar <vaishali.thakkar@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
 2019-08-05 14:56:30 -07:00
Wu Hao
52eb6d31a1 fpga: dfl: fme: add capability sysfs interfaces 
This patch adds 3 read-only sysfs interfaces for FPGA Management Engine
(FME) block for capabilities including cache_size, fabric_version and
socket_id.

Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Acked-by: Alan Tull <atull@kernel.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/1564914022-3710-11-git-send-email-hao.wu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2019-08-05 18:03:20 +02:00
Wu Hao
d2ad5ac1cd fpga: dfl: afu: add AFU state related sysfs interfaces 
This patch introduces more sysfs interfaces for Accelerated
Function Unit (AFU). These interfaces allow users to read
current AFU Power State (APx), read / clear AFU Power (APx)
events which are sticky to identify transient APx state,
and manage AFU's LTR (latency tolerance reporting).

Signed-off-by: Ananda Ravuri <ananda.ravuri@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Acked-by: Alan Tull <atull@kernel.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/1564914022-3710-4-git-send-email-hao.wu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2019-08-05 17:56:47 +02:00