There are still surprisingly many non-chanctx drivers, but in
mac80211 that code is a bit awkward. Simplify this by having
those drivers assign 'emulated' ops, so that the mac80211 code
can be more unified between non-chanctx/chanctx drivers. This
cuts the number of places caring about it by about 15, which
are scattered across - now they're fewer and no longer in the
channel context handling.
Link: https://msgid.link/20240129194108.6d0ead50f5cf.I60d093b2fc81ca1853925a4d0ac3a2337d5baa5b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the code we currently check for support 80+80, 160
and 320 channel widths, but really the way this should
be (and is otherwise) handled is that we compute the
highest channel bandwidth given there, and then cut it
down to what we support. This is also needed for wider
bandwidth OFDMA support.
Change the code to remove this limitation and always
parse the highest possible channel width.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240129194108.d06f85082e29.I47e68ed3d97b0a2f4ee61e5d8abfcefc8a5b9c08@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Rewrite the station-side connection handling. The connection
flags (IEEE80211_DISABLE_*) are rather confusing, and they're
not always maintained well. Additionally, for wider-bandwidth
OFDMA support we need to know the precise bandwidth of the AP,
which is currently somewhat difficult.
Rewrite this to have a 'mode' (S1G/legacy/HT/...) and a limit
on the bandwidth. This is not entirely clean because some of
those modes aren't completely sequenced (as this assumes in
some places), e.g. VHT doesn't exist on 2.4 GHz, but HE does.
However, it still simplifies things and gives us a good idea
what we're operating as, so we can parse elements accordingly
etc.
This leaves a FIXME for puncturing, this is addressed in a
later patch.
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240129194108.9451722c0110.I3e61f4cfe9da89008e1854160093c76a1e69dc2a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When parsing 6 GHz operation, don't set the bss_conf
values. We only commit to that later in association,
so move the code there. Also clear it later.
While at it, handle IEEE80211_6GHZ_CTRL_REG_VLP_AP.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240111181514.c2da4bc515e8.I219ca40e15c0fbaff0e7c3e83ca4b92ecbc1f8ae@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We only have a single flag free, and before using that for
another mactime flag, instead refactor the mactime flags
to use a 2-bit field.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231220133549.d0e664832d14.I20c8900106f9bf81316bed778b1e3ce145785274@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
While there, use struct_size() helper, instead of the open-coded
version, to calculate the size for the allocation of the whole
flexible structure including, of course, the flexible-array member.
This code was found with the help of Coccinelle, and audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/ZSQ/jcmTAf/PKHg/@work
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When this flow is invoked with the "drop" parameter as true,
we only drop the frames from the hw queues, but not from the
sw queues.
So when we call wake_queues() after hw queue purging, all the
frames from the sw queues will be TX'ed,
when what we actually want to do is to purge all queues
in order to not TX anything...
This can cause, for example, TXing data frames to the peer
after the deauth frame was sent.
Fix this by purging the sw queues in addition to the hw queues
if the drop parameter is true.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.8fc2ee23e56f.I8b3f6def9c28ea96261e2d31df8786986fb5385b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We really cannot even get into this as we can't have
a BSS with a 5/10 MHz (scan) width, and therefore all
the code handling shifted rates cannot happen. Remove
it all, since it's broken anyway, at least with MLO.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since we're now protecting everything with the wiphy mutex
(and were really using it for almost everything before),
there's no longer any real reason to have a separate wdev
mutex. It may feel better, but really has no value.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We now hold the wiphy mutex everywhere that we use or
needed the iflist_mtx, so we don't need this mutex any
more in mac80211. However, drivers may also iterate,
and in some cases (e.g. mt76) do so from high-priority
contexts. Thus, keep the mutex around but remove its
usage in mac80211 apart from those driver-visible parts
that are still needed.
Most of this change was done automatically with spatch,
with the parts that are still needed as described above
reverted manually.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We now hold the wiphy mutex everywhere that we use or
needed the local->mtx, so we don't need this mutex any
more. Remove it.
Most of this change was done automatically with spatch.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We now hold the wiphy mutex everywhere that we use or
needed the chanctx_mtx, so we don't need this mutex any
more. Remove it.
Most of this change was done automatically with spatch.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We now hold the wiphy mutex everywhere that we use or
needed the key_mtx, so we don't need this mutex any
more. Remove it.
Most of this change was done automatically with spatch.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We now hold the wiphy mutex everywhere that we use or
needed the sta_mtx, so we don't need this mutex any
more. Remove it.
Most of this change was done automatically with spatch.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This again is intended for future cleanups that are
possible when mac80211 and drivers can assume the
wiphy is locked.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Move the scan work to wiphy work, which also simplifies
the way we handle the work vs. the scan configuration.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Move the radar detect work to wiphy work in order
to lock the wiphy for it without doing it manually.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Move the DFS CAC work over to hold the wiphy lock
there without worry about work cancellation.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Before converting more works to wiphy work, add
flushing in mac80211 where we also flush the
mac80211 workqueue. Not needed in suspend since
cfg80211 will have taken care of it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For extended elements, we currently only calculate the CRC
for some of them, but really we should do it also for the
rest that we care about, such as EHT operation and multi-
link.
Also, while at it, it seems we should do it even if they
aren't well-formed, so we notice if that changes.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230619161906.93235d5c8651.I6615cb3c1244bc9618066baa2bdad7982e9abd1f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Include the Multi-Link elements found in beacon frames
in the CRC calculation, as these elements are intended
to reflect changes in the AP MLD state.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214435.ae8246b93d85.Ia64b45198de90ff7f70abcc997841157f148ea40@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As a preparation to support Reconfiguration Multi Link
element, rename 'multi_link' and 'multi_link_len' fields
in 'struct ieee802_11_elems' to 'ml_basic' and 'ml_basic_len'.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094949.b11370d3066a.I34280ae3728597056a6a2f313063962206c0d581@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In mesh mode, ieee80211_chandef_he_6ghz_oper() is called by
mesh_matches_local() for every received mesh beacon.
On a 6 GHz mesh of a HE-only phy, this spams that the hardware does not
have EHT capabilities, even if the received mesh beacon does not have an
EHT element.
Unlike HE, not supporting EHT in the 6 GHz band is not an error so do
not print anything in this case.
Fixes: 5dca295dd7 ("mac80211: Add initial support for EHT and 320 MHz channels")
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230614132648.28995-1-nicolas.cavallari@green-communications.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are some locking changes that will later otherwise
cause conflicts, so merge wireless into wireless-next to
avoid those.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As a preparation to support disabled/dormant links, add the
following function:
- ieee80211_vif_usable_links(): returns the bitmap of the links
that can be activated. Use this function in all the places that
the bitmap of the usable links is needed.
- ieee80211_vif_is_mld(): returns true iff the vif is an MLD.
Use this function in all the places where an indication that the
connection is a MLD is needed.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230608163202.86e3351da1fc.If6fe3a339fda2019f13f57ff768ecffb711b710a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's quite a bit of code accessing sband iftype data
(HE, HE 6 GHz, EHT) and we always need to remember to use
the ieee80211_vif_type_p2p() helper. Add new helpers to
directly get it from the sband/vif rather than having to
call ieee80211_vif_type_p2p().
Convert most code with the following spatch:
@@
expression vif, sband;
@@
-ieee80211_get_he_iftype_cap(sband, ieee80211_vif_type_p2p(vif))
+ieee80211_get_he_iftype_cap_vif(sband, vif)
@@
expression vif, sband;
@@
-ieee80211_get_eht_iftype_cap(sband, ieee80211_vif_type_p2p(vif))
+ieee80211_get_eht_iftype_cap_vif(sband, vif)
@@
expression vif, sband;
@@
-ieee80211_get_he_6ghz_capa(sband, ieee80211_vif_type_p2p(vif))
+ieee80211_get_he_6ghz_capa_vif(sband, vif)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230604120651.db099f49e764.Ie892966c49e22c7b7ee1073bc684f142debfdc84@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When fragmenting the ML per STA profile, the element ID should be
IEEE80211_MLE_SUBELEM_PER_STA_PROFILE rather than WLAN_EID_FRAGMENT.
Change the helper function to take the to be used element ID and pass
the appropriate value for each of the fragmentation levels.
Fixes: 81151ce462 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230611121219.9b5c793d904b.I7dad952bea8e555e2f3139fbd415d0cd2b3a08c3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We'll need this later to convert other works that might
be cancelled from here, so convert this one first.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are a number of upcoming things in both the stack and
drivers that would otherwise conflict, so merge wireless to
wireless-next to be able to avoid those conflicts.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we have a reconfig failure in the driver, then we need
to shut down the network interface(s) at the network stack
level through cfg80211, which can result in a lot of those
"Failed check-sdata-in-driver check, ..." warnings, since
interfaces are considered to not be in the driver when the
reconfiguration fails, but we still need to go through all
the shutdown flow.
Avoid many of these warnings by storing the fact that the
stack experienced a reconfiguration failure and not doing
the warning in that case.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230604120651.3750c4ae6e76.I9e80d6026f59263c008a1a68f6cd6891ca0b93b0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The size of enum ieee80211_bss_change is bigger that 32,
so we need u64 to be used in a flag. Also pass u64
instead of u32 to ieee80211_reconfig_ap_links() for the same
reason.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230604120651.d53b7018a4eb.I1adaa041de51d50d84a11226573e81ceac0fe90d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Previously, I didn't implement restarting here at all if the
interface is an MLD, so it only worked for non-MLO. Add the
needed code to restart an AP MLD correctly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230504134511.828474-12-gregory.greenman@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Implement proper reconfiguration for interfaces that are
doing MLO, in order to be able to recover from HW restart
correctly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230504134511.828474-6-gregory.greenman@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When a chanctx is reserved for a new vif and we recalculate
the minimal definition for it, we need to consider the new
interface it's being reserved for before we assign it, so it
can be used directly with the correct min channel width.
Fix the code to - optionally - consider that, and use that
option just before doing the reassignment.
Also, when considering channel context reservations, we
should only consider the one link we're currently working with.
Change the boolean argument to a link pointer to do that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230504134511.828474-4-gregory.greenman@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Similar to AP beacon, this enables the basic mesh EHT mode, including
EHT operation IE and the fixed field of EHT operation information IE.
As for the optional part (i.e. preamble puncturing bitmap) will be
added in future patch.
Tested-by: Lian Chen <lian.chen@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Link: https://lore.kernel.org/r/1e0ddb9001312451c3e99c4eed2072caf8075f61.1679935259.git.ryder.lee@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are a few merge conflicts due to overlapping
fixes and changes, merge wireless/main to fix them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_handle_wake_tx_queue must not run concurrent multiple times.
It calls ieee80211_txq_schedule_start() and the drivers migrated to iTXQ
do not expect overlapping drv_tx() calls.
This fixes 'c850e31f79f0 ("wifi: mac80211: add internal handler for
wake_tx_queue")', which introduced ieee80211_handle_wake_tx_queue.
Drivers started to use it with 'a790cc3a4fad ("wifi: mac80211: add
wake_tx_queue callback to drivers")'.
But only after fixing an independent bug with
'4444bc2116ae ("wifi: mac80211: Proper mark iTXQs for resumption")'
problematic concurrent calls really happened and exposed the initial
issue.
Fixes: c850e31f79 ("wifi: mac80211: add internal handler for wake_tx_queue")
Reported-by: Thomas Mann <rauchwolke@gmx.net>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217119
Link: https://lore.kernel.org/r/b8efebc6-4399-d0b8-b2a0-66843314616b@leemhuis.info/
Link: https://lore.kernel.org/r/b7445607128a6b9ed7c17fcdcf3679bfaf4aaea.camel@sipsolutions.net>
CC: <stable@vger.kernel.org>
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Link: https://lore.kernel.org/r/20230314211122.111688-1-alexander@wetzel-home.de
[add missing spin_lock_init() noticed by Felix]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add minimal support for RX EHT rate reporting, not yet
adding (modifying) any radiotap headers, just statistics
for cfg80211.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
