So mem-memcpy.c started out as a simple memcpy() benchmark, then it grew
memset() functionality and now I plan to add string copy benchmarks as
well.
This makes the file name a misnomer: rename it to the more generic
mem-functions.c name.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1445241870-24854-5-git-send-email-mingo@kernel.org
[ The "rename" was introducing __unused, wasn't removing the old file,
and didn't update tools/perf/bench/Build, fix it ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently libtraceevent emits warning on unsupported event formats.
However it'd be better to see them only -v option is given. To do that,
it needs to override the warning() function which is used in the
libtracevent. Thus add set_warning_routine() same as set_die_routine()
and check the verbose flag in our warning routine.
Before:
# perf test 5
5: parse events tests :
Warning: [kvmmmu:kvm_mmu_get_page] bad op token {
Warning: [kvmmmu:kvm_mmu_sync_page] bad op token {
Warning: [kvmmmu:kvm_mmu_unsync_page] bad op token {
Warning: [kvmmmu:kvm_mmu_prepare_zap_page] bad op token {
Warning: [kvmmmu:fast_page_fault] function is_writable_pte not defined
...
Ok
After:
# perf test 5
5: parse events tests : Ok
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1445268229-1601-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, when 'perf test' is run by a normal user, it'll fail to
access tracepoint events. The output becomes somewhat messy because it
tries to be nice with long error messages and hints.
IMHO this is not needed for 'perf test' by default and AFAIK 'perf test'
uses pr_debug() rather than pr_err() for such messages so that one can
use -v option to see further details on failed testcases if needed.
Before:
$ perf test
1: vmlinux symtab matches kallsyms : FAILED!
2: detect openat syscall event :Error:
No permissions to read
/sys/kernel/debug/tracing/events/syscalls/sys_enter_openat
Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug/tracing'
FAILED!
3: detect openat syscall event on all cpus :Error:
No permissions to read
/sys/kernel/debug/tracing/events/syscalls/sys_enter_openat
Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug/tracing'
FAILED!
...
After:
$ perf test
1: vmlinux symtab matches kallsyms : FAILED!
2: detect openat syscall event : FAILED!
3: detect openat syscall event on all cpus : FAILED!
...
$ perf test -v 2
2: detect openat syscall event :
--- start ---
test child forked, pid 30575
Error: No permissions to read
/sys/kernel/debug/tracing/events/syscalls/sys_enter_openat
Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug/tracing'
test child finished with -1
---- end ----
detect openat syscall event: FAILED!
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1445268229-1601-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
User visible:
- Use the alternative with the most descriptive filename containing
a vmlinux file for a given build-id, providing a better title line
for tools such as 'annotate' (Arnaldo Carvalho de Melo)
- Remove help messages about previous right and left arrow keybidings, that
were repurposed for horizontal scrolling (Arnaldo Carvalho de Melo)
- Inform how to reset the symbol filter in the hists browser (top & report)
(Arnaldo Carvalho de Melo)
- Add 'm' key for context menu display in the hists browser, that became
inacessible with the repurposing of the right arrow key for horizontal
scrolling (Namhyung Kim)
- Use debug_frame for callchains if eh_frame is unusable (Rabin Vicent)
Build fixes:
- Fix strict-aliasing breakage with gcc 4.4 in the READ_ONCE/WRITE_ONCE code
adopted from the kernel tree, that builds with -fno-strict-aliasing while
tools/perf/ uses -Wstrict-aliasing=3 (Jiri Olsa)
- Fix unw_word_t pointer casts in code using libunwind for callchains,
fixing the build in at least 32-bit MIPS systems (Rabin Vicent)
- Workaround cross compile build problems related to fixdep (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=dLXA
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Use the alternative with the most descriptive filename containing
a vmlinux file for a given build-id, providing a better title line
for tools such as 'annotate'. (Arnaldo Carvalho de Melo)
- Remove help messages about previous right and left arrow keybidings, that
were repurposed for horizontal scrolling. (Arnaldo Carvalho de Melo)
- Inform how to reset the symbol filter in the hists browser. (top & report)
(Arnaldo Carvalho de Melo)
- Add 'm' key for context menu display in the hists browser, that became
inacessible with the repurposing of the right arrow key for horizontal
scrolling. (Namhyung Kim)
- Use debug_frame for callchains if eh_frame is unusable. (Rabin Vicent)
Build fixes:
- Fix strict-aliasing breakage with gcc 4.4 in the READ_ONCE/WRITE_ONCE code
adopted from the kernel tree, that builds with -fno-strict-aliasing while
tools/perf/ uses -Wstrict-aliasing=3. (Jiri Olsa)
- Fix unw_word_t pointer casts in code using libunwind for callchains,
fixing the build in at least 32-bit MIPS systems. (Rabin Vicent)
- Work around cross compile build problems related to fixdep. (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
He Kuang the new fixdep tool breaks cross compiling. The reason is it
wouldn't get compiled under host arch, but under cross arch and failed
to run.
We need to add support for host side tools build, meanwhile disabling
fixdep usage for cross arch builds.
Reported-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20151013124358.GB9467@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Vinson reported build breakage with gcc 4.4 due to strict-aliasing.
CC util/annotate.o
cc1: warnings being treated as errors
util/annotate.c: In function ‘disasm__purge’:
linux-next/tools/include/linux/compiler.h:66: error: dereferencing
pointer ‘res.41’ does break strict-aliasing rules
The reason is READ_ONCE/WRITE_ONCE code we took from kernel sources. They
intentionaly break aliasing rules. While this is ok for kernel because it's
built with -fno-strict-aliasing, it breaks perf which is build with
-Wstrict-aliasing=3.
Using extra __may_alias__ type to allow aliasing in this case.
Reported-and-tested-by: Vinson Lee <vlee@twopensource.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Martin Liska <mliska@suse.cz>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rabin Vincent <rabin@rab.in>
Cc: linux-next@vger.kernel.org
Link: http://lkml.kernel.org/r/20151013085214.GB2705@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With horizontal scrolling, the left/right arrow keys are used to scroll
columns and ENTER/ESC keys are used to enter/exit menu. However if
callchain is recorded, the ENTER key is used to toggle callchain
expansion so there's no way to display menu. Use 'm' key to display the
menu for this case.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444694521-8136-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
unw_word_t is uint64_t even on 32-bit MIPS. Cast it to uintptr_t before
the cast to void *p to get rid of the following errors:
util/unwind-libunwind.c: In function 'access_mem':
util/unwind-libunwind.c:464:4: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
util/unwind-libunwind.c:475:2: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
cc1: all warnings being treated as errors
make[3]: *** [util/unwind-libunwind.o] Error 1
Signed-off-by: Rabin Vincent <rabin.vincent@axis.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rabin Vincent <rabinv@axis.com>
Link: http://lkml.kernel.org/r/1443379079-29133-1-git-send-email-rabin.vincent@axis.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When NO_LIBUNWIND_DEBUG_FRAME=0, use the .debug_frame if the .eh_frame
doesn't contain the approprate unwind tables.
Signed-off-by: Rabin Vincent <rabin.vincent@axis.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rabin Vincent <rabinv@axis.com>
Link: http://lkml.kernel.org/r/1443379079-29133-3-git-send-email-rabin.vincent@axis.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When in the hists browser, i.e. in 'perf report' or in 'perf top', it is
possible to press '/' and specify a substring to filter by symbol name.
Clarify how to remove a filter by making the prompt be:
Please enter the name of symbol you want to see.
To remove the filter later, press / + ENTER
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-vbq2b0kyufwy6p0ctkfswcoe@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
They were repurposed for horizontal scrolling, so use just ENTER/ESC in
the help messages.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: c6c3c02dea ("perf hists browser: Implement horizontal scrolling")
Link: http://lkml.kernel.org/n/tip-n5ar4qg8fs12ax4vhr3rxhxj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Not as the first attempt at finding a vmlinux for the running kernel,
this way we get a more informative filename to present in tools, it will
check that the build-id is the same as the one previously loaded in the
DSO in dso->build_id, reading from /sys/kernel/notes, for instance.
E.g. in the annotation TUI, going from 'perf top', for the scsi_sg_alloc
kernel function, in the first line:
Before:
scsi_sg_alloc /root/.debug/.build-id/28/2777c262e6b3c0451375163c9a81c893218ab1
After:
scsi_sg_alloc /lib/modules/4.3.0-rc1+/build/vmlinux
And:
# ls -la /root/.debug/.build-id/28/2777c262e6b3c0451375163c9a81c893218ab1
lrwxrwxrwx. 1 root root 81 Sep 22 16:11 /root/.debug/.build-id/28/2777c262e6b3c0451375163c9a81c893218ab1 -> ../../home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1
# file ~/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1
/root/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, BuildID[sha1]=282777c262e6b3c0451375163c9a81c893218ab1, not stripped
#
The same as:
# file /lib/modules/4.3.0-rc1+/build/vmlinux
/lib/modules/4.3.0-rc1+/build/vmlinux: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, BuildID[sha1]=282777c262e6b3c0451375163c9a81c893218ab1, not stripped
Furthermore:
# sha256sum /lib/modules/4.3.0-rc1+/build/vmlinux
e7a789bbdc61029ec09140c228e1dd651271f38ef0b8416c0b7d5ff727b98be2 /lib/modules/4.3.0-rc1+/build/vmlinux
# sha256sum ~/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1
e7a789bbdc61029ec09140c228e1dd651271f38ef0b8416c0b7d5ff727b98be2 /root/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1
[root@zoo new]#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-9y42ikzq3jisiddoi6f07n8z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
User visible:
- Adding a field via 'perf report -F' that already is enabled makes
the tool get stuck in a loop, fix it (Jiri Olsa)
Infrastructure:
- Support PERF_RECORD_SWITCH in the python binding (Arnaldo Carvalho de Melo)
- Fix handling read() result using a signed variable, found with Coccinelle
(Andrzej Hajda)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Iv+A
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Adding a field via 'perf report -F' that already is enabled makes
the tool get stuck in a loop, fix it. (Jiri Olsa)
Infrastructure changes:
- Support PERF_RECORD_SWITCH in the python binding. (Arnaldo Carvalho de Melo)
- Fix handling read() result using a signed variable, found with Coccinelle.
(Andrzej Hajda)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Fix build break on (at least) powerpc due to sample_reg_masks, not being
available for linking (Sukadev Bhattiprolu)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Dr5G
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fix from Arnaldo Carvalho de Melo:
- Fix build break on (at least) powerpc due to sample_reg_masks, not being
available for linking. (Sukadev Bhattiprolu)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
perf_regs.c does not get built on Powerpc as CONFIG_PERF_REGS is false.
So the weak definition for 'sample_regs_masks' doesn't get picked up.
Adding perf_regs.o to util/Build unconditionally, exposes a redefinition
error for 'perf_reg_value()' function (due to the static inline version
in util/perf_regs.h). So use #ifdef HAVE_PERF_REGS_SUPPORT' around that
function.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: linuxppc-dev@ozlabs.org
Link: http://lkml.kernel.org/r/20150930182836.GA27858@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Highlights include:
Bugfixes:
- Fix a use-after-free bug in the RPC/RDMA client
- Fix a write performance regression
- Fix up page writeback accounting
- Don't try to reclaim unused state owners
- Fix a NFSv4 nograce recovery hang
- reset states to use open_stateid when returning delegation voluntarily
- Fix a tracepoint NULL-pointer dereference
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=aoNS
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.3-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
Bugfixes:
- Fix a use-after-free bug in the RPC/RDMA client
- Fix a write performance regression
- Fix up page writeback accounting
- Don't try to reclaim unused state owners
- Fix a NFSv4 nograce recovery hang
- reset states to use open_stateid when returning delegation
voluntarily
- Fix a tracepoint NULL-pointer dereference"
* tag 'nfs-for-4.3-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Fix a tracepoint NULL-pointer dereference
nfs4: reset states to use open_stateid when returning delegation voluntarily
NFSv4: Fix a nograce recovery hang
NFSv4.1: nfs4_opendata_check_deleg needs to handle NFS4_OPEN_CLAIM_DELEG_CUR_FH
NFSv4: Don't try to reclaim unused state owners
NFS: Fix a write performance regression
NFS: Fix up page writeback accounting
xprtrdma: disconnect and flush cqs before freeing buffers
This reverts commit 998ef75ddb.
The commit itself does not appear to be buggy per se, but it is exposing
a bug in ext4 (and Ted thinks ext3 too, but we solved that by getting
rid of it). It's too late in the release cycle to really worry about
this, even if Dave Hansen has a patch that may actually fix the
underlying ext4 problem. We can (and should) revisit this for the next
release.
The problem is that moving the prefaulting later now exposes a special
case with partially successful writes that isn't handled correctly. And
the prefaulting likely isn't normally even that much of a performance
issue - it looks like at least one reason Dave saw this in his
performance tests is that he also ran them on Skylake that now supports
the new SMAP code, which makes the normally very cheap user space
prefaulting noticeably more expensive.
Bisected-and-acked-by: Ted Ts'o <tytso@mit.edu>
Analyzed-and-acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Running xfstest generic/013 with the tracepoint nfs:nfs4_open_file
enabled produces a NULL-pointer dereference when calculating fileid and
filehandle of the opened file. Fix this by checking if state is NULL
before trying to use the inode pointer.
Reported-by: Olga Kornievskaia <aglo@umich.edu>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The function can return negative value, assigning it to unsigned
variable can cause memory corruption.
The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1].
[1]: http://permalink.gmane.org/gmane.linux.kernel/2038576
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-janitors@vger.kernel.org
Link: http://lkml.kernel.org/r/1444122017-16856-1-git-send-email-a.hajda@samsung.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_hpp__init currently does not respect sorting dimensions and the
setup_sorting function could endup queueing same format twice. That
screwed up the perf_hpp__list and got stuck in loop within
perf_hpp__setup_output_field function.
$ perf report -F +overhead
0x00000000004c1355 in perf_hpp__is_sort_entry (format=format@entry=0x880440 <perf_hpp.format>) at util/sort.c:1506
1506 {
#0 0x00000000004c1355 in perf_hpp__is_sort_entry (format=format@entry=0x880440 <perf_hpp.format>) at util/sort.c:1506
#1 0x00000000004c139d in perf_hpp__same_sort_entry (a=a@entry=0x880440 <perf_hpp.format>, b=b@entry=0x2bb2fe0) at util/sort.c:1380
#2 0x00000000004f8d3c in perf_hpp__setup_output_field () at ui/hist.c:554
#3 0x00000000004c1d1e in setup_sorting () at util/sort.c:1984
#4 0x000000000042efbf in cmd_report (argc=0, argv=0x7ffea5a0e790, prefix=<optimized out>) at builtin-report.c:874
#5 0x0000000000476f13 in run_builtin (p=p@entry=0x875628 <commands+168>, argc=argc@entry=3, argv=argv@entry=0x7ffea5a0e790) at perf.c:385
#6 0x000000000047710b in handle_internal_command (argc=3, argv=0x7ffea5a0e790) at perf.c:445
#7 0x0000000000477176 in run_argv (argcp=argcp@entry=0x7ffea5a0e5fc, argv=argv@entry=0x7ffea5a0e5f0) at perf.c:489
#8 0x00000000004773e7 in main (argc=3, argv=0x7ffea5a0e790) at perf.c:606
Using hpp_dimension__add_output function to register the output column.
It will also mark the dimension as taken and omit above stuck.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444134312-29136-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This function will allow to register output column from ui code and
respect taken sort/output dimensions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444134312-29136-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no need to call reset_dimensions within __setup_output_field
function. It's already called in its caller setup_sorting right before
perf_hpp__init, which will be changed in following patch to respect
taken dimension.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444134312-29136-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In multi-segment system, uncore devices may belong to buses whose segment
number is other than 0:
....
0000:ff:10.5 System peripheral: Intel Corporation Xeon E5 v3/Core i7 Scratchpad & Semaphore Registers (rev 03)
...
0001:7f:10.5 System peripheral: Intel Corporation Xeon E5 v3/Core i7 Scratchpad & Semaphore Registers (rev 03)
...
0001:bf:10.5 System peripheral: Intel Corporation Xeon E5 v3/Core i7 Scratchpad & Semaphore Registers (rev 03)
...
0001:ff:10.5 System peripheral: Intel Corporation Xeon E5 v3/Core i7 Scratchpad & Semaphore Registers (rev 03
...
In that case, relation of bus number and physical id may be broken
because "uncore_pcibus_to_physid" doesn't take account of PCI segment.
For example, bus 0000:ff and 0001:ff uses the same entry of
"uncore_pcibus_to_physid" array.
This patch fixes this problem by introducing the segment-aware pci2phy_map instead.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: hpa@zytor.com
Link: http://lkml.kernel.org/r/1443096621-4119-1-git-send-email-izumi.taku@jp.fujitsu.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch adds new PMUs to support cstate related free running
(read-only) counters. These counters may be used simultaneously by other
tools, such as turbostat. However, it still make sense to implement them
in perf. Because we can conveniently collect them together with other
events, and allow to use them from tools without special MSR access
code.
These counters include CORE_C*_RESIDENCY and PKG_C*_RESIDENCY.
According to counters' scope and category, two PMUs are registered with
the perf_event core subsystem.
- 'cstate_core': The counter is available for each physical core. The
counters include CORE_C*_RESIDENCY.
- 'cstate_pkg': The counter is available for each physical package. The
counters include PKG_C*_RESIDENCY.
The events are exposed in sysfs for use by perf stat and other tools.
The files are:
/sys/devices/cstate_core/events/c*-residency
/sys/devices/cstate_pkg/events/c*-residency
These events only support system-wide mode counting.
The /sys/devices/cstate_*/cpumask file can be used by tools to figure
out which CPUs to monitor by default.
The PMU type (attr->type) is dynamically allocated and is available from
/sys/devices/core_misc/type and /sys/device/cstate_*/type.
Sampling is not supported.
Here is an example.
- To caculate the fraction of time when the core is running in C6 state
CORE_C6_time% = CORE_C6_RESIDENCY / TSC
# perf stat -x, -e"cstate_core/c6-residency/,msr/tsc/" -C0 -- taskset -c 0 sleep 5
11838820015,,cstate_core/c6-residency/,5175919658,100.00
11877130740,,msr/tsc/,5175922010,100.00
For sleep, 99.7% of time we ran in C6 state.
# perf stat -x, -e"cstate_core/c6-residency/,msr/tsc/" -C0 -- taskset -c 0 busyloop
1253316,,cstate_core/c6-residency/,4360969154,100.00
10012635248,,msr/tsc/,4360972366,100.00
For busyloop, 0.01% of time we ran in C6 state.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1443443404-8581-1-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Fix VM save performance regression with x86 PV guests.
- Make kexec work in x86 PVHVM guests (if Xen has the soft-reset ABI).
- Other minor fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWE8wQAAoJEFxbo/MsZsTRVTMH/0eqSg2M78wv4sBl234Y3FE9
AN8KFUdlkK7VN9v0uuLMDSKIWNUuFJIvo/2rElWGRiX2Q+/pfnQg3ZSFhub9S8uL
T4LCvmG9viRFb2oUz792ewqncSw3X98Jpto4smA820gJRjndBSWm5HUKUtPAkv1M
l5DFMEgOeHbu+wCbKD/ZPEt5K9GsIaNviSNoWtYHirZwrd00oLmNbWp+g8lIGQiT
3vLW0SaZzjL6akKxihb/p3WZ9eNmyz8yk0V7dItUEVUB9qoaDDLJ5qIRSHHWTWQD
Jza/GE32VallZLuEXGG5/D86MsnyVYHC+lZtwo2IptOGm8v7WuZRv094wI1ev5c=
=aiDw
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.3b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen bug fixes from David Vrabel:
- Fix VM save performance regression with x86 PV guests
- Make kexec work in x86 PVHVM guests (if Xen has the soft-reset ABI)
- Other minor fixes.
* tag 'for-linus-4.3b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen/p2m: hint at the last populated P2M entry
x86/xen: Do not clip xen_e820_map to xen_e820_map_entries when sanitizing map
x86/xen: Support kexec/kdump in HVM guests by doing a soft reset
xen/x86: Don't try to write syscall-related MSRs for PV guests
xen: use correct type for HYPERVISOR_memory_op()
Pull s390 fixes from Martin Schwidefsky:
"Three bug fixes and an update to the default configuration"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/defconfig: set SCSI_DH=y
s390/vtime: correct scaled cputime of partially idle CPUs
s390/boot/decompression: disable floating point in decompressor
s390/numa: use correct type for node_to_cpumask_map
Pull CIFS fixes from Steve French:
"Two fixes for problems pointed out by automated tools.
Thanks PaX/grsecurity team and Dan Carpenter (and the Smatch tool)"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
[CIFS] Update cifs version number
[SMB3] Do not fall back to SMBWriteX in set_file_size error cases
[SMB3] Missing null tcon check
With commit 633d6f17cd (x86/xen: prepare
p2m list for memory hotplug) the P2M may be sized to accomdate a much
larger amount of memory than the domain currently has.
When saving a domain, the toolstack must scan all the P2M looking for
populated pages. This results in a performance regression due to the
unnecessary scanning.
Instead of reporting (via shared_info) the maximum possible size of
the P2M, hint at the last PFN which might be populated. This hint is
increased as new leaves are added to the P2M (in the expectation that
they will be used for populated entries).
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Cc: <stable@vger.kernel.org> # 4.0+
User visible:
- Switch the default callchain output mode to 'graph,0.5,caller', to make it
look like the default for other tools, reducing the learning curve for
people used to 'caller' based viewing (Arnaldo Carvalho de Melo)
- Implement column based horizontal scrolling in the hists browser (top, report),
making it possible to use the TUI for things like 'perf mem report' where
there are many more columns than can fit in a terminal (Arnaldo Carvalho de Melo)
- Support sorting by symbol_iaddr with perf.data files produced by
'perf mem record' (Don Zickus)
- Display DATA_SRC sample type bit, i.e. when running 'perf evlist -v' the
"DATA_SRC" wasn't appearing when set, fix it to look like: (Jiri Olsa)
cpu/mem-loads/pp: ...SNIP... sample_type: IP|TID|TIME|ADDR|CPU|PERIOD|DATA_SRC
- Introduce 'P' event modified, meaning 'max precision level, please', i.e.:
$ perf record -e cycles:P usleep 1
Is now similar to:
$ perf record usleep 1
Useful, for instance, when specifying multiple events (Jiri Olsa)
- Make 'perf -v' and 'perf -h' work (Jiri Olsa)
- Fail properly when pattern matching fails to find a tracepoint, i.e.
'-e non:existent' was being correctly handled, with a proper error message
about that not being a valid event, but '-e non:existent*' wasn't,
fix it (Jiri Olsa)
Infrastructure:
- Separate arch specific entries in 'perf test' and add an 'Intel CQM' one
to be fun on x86 only (Matt Fleming)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Tq8M
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Switch the default callchain output mode to 'graph,0.5,caller', to make it
look like the default for other tools, reducing the learning curve for
people used to 'caller' based viewing. (Arnaldo Carvalho de Melo)
- Implement column based horizontal scrolling in the hists browser (top, report),
making it possible to use the TUI for things like 'perf mem report' where
there are many more columns than can fit in a terminal. (Arnaldo Carvalho de Melo)
- Support sorting by symbol_iaddr with perf.data files produced by
'perf mem record'. (Don Zickus)
- Display DATA_SRC sample type bit, i.e. when running 'perf evlist -v' the
"DATA_SRC" wasn't appearing when set, fix it to look like: (Jiri Olsa)
cpu/mem-loads/pp: ...SNIP... sample_type: IP|TID|TIME|ADDR|CPU|PERIOD|DATA_SRC
- Introduce the 'P' event modifier, meaning 'max precision level, please', i.e.:
$ perf record -e cycles:P usleep 1
Is now similar to:
$ perf record usleep 1
Useful, for instance, when specifying multiple events. (Jiri Olsa)
- Make 'perf -v' and 'perf -h' work. (Jiri Olsa)
- Fail properly when pattern matching fails to find a tracepoint, i.e.
'-e non:existent' was being correctly handled, with a proper error message
about that not being a valid event, but '-e non:existent*' wasn't,
fix it. (Jiri Olsa)
Infrastructure changes:
- Separate arch specific entries in 'perf test' and add an 'Intel CQM' one
to be fun on x86 only. (Matt Fleming)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently we dont fail properly when pattern matching fails to find any
tracepoint.
Current behaviour:
$ perf record -e 'sched:krava*' sleep 1
WARNING: event parser found nothinginvalid or unsupported event: 'sched:krava*'
Run 'perf list' for a list of valid events
usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
This patch change:
$ perf record -e 'sched:krava*' sleep 1
event syntax error: 'sched:krava*'
\___ unknown tracepoint
Error: File /sys/kernel/debug/tracing/events/sched/krava* not found.
Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?.
Run 'perf list' for a list of valid events
usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
Reported-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444073477-3181-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Do it using the recently introduced ui_brower scrolling mode, setting
ui_browser.columns to the number of sort columns and then, when
rendering each line, skipping as many initial columns as the user
pressed the right arrow.
As the user presses the left arrow, the ui_browser code will remove the
scrolling counter and the left scrolling takes place.
The right arrow key was an alias for ENTER, so people used to press it
may get a bit annoyed at first, sorry! Ditto for ESC and the left key.
Callchains can be left as is or we can, when rendering the Symbol
column, store the at what position on the screen it is and then
using ui_browser__gotorc() to print it from there, i.e. the callchain
would move around with the symbol.
Leaving it as is, i.e. at a fixed position, close to the left, saves
precious screen real state for it, so I'm inclined to leave it as is
now.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ccqq9sabgfge5dwbqjwh71ij@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the classes derived from ui_browser want to do some sort of
horizontal scrolling, they have just to set ui_browser->columns to
the number of columns available.
Those columns can be the number of characters on the screen, if what is
desired is to scroll character by character, or the number of columns in
a spreadsheet like table.
This is what the hist_browser will do, skipping ui_browser->horiz_scroll
columns when rendering each of its lines.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-q6a22bpmpgcr1awgzrmd4jrs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Which is the most common default found in other similar tools.
Requested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://www.youtube.com/watch?v=nXaxk27zwlk
Link: http://lkml.kernel.org/n/tip-v8lq36aispvdwgxdmt9p9jd9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Peter reports that it's possible to trigger a WARN_ON_ONCE() in the
Intel CQM code by combining a hardware event and an Intel CQM
(software) event into a group. Unfortunately, the perf tools are not
able to create this bundle and we need to manually construct a test
case.
For posterity, record Peter's proof of concept test case in tools/perf
so that it presents a model for how we can perform architecture
specific tests, or "arch tests", in perf in the future.
The particular issue triggered in the test case is that when the
counter for the hardware event overflows and triggers a PMI we'll read
both the hardware event and the software event counters.
Unfortunately, for CQM that involves performing an IPI to read the CQM
event counters on all sockets, which in NMI context triggers the
WARN_ON_ONCE().
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kanaka Juvva <kanaka.d.juvva@intel.com>
Cc: Vikas Shivappa <vikas.shivappa@intel.com>
Cc: Vince Weaver <vince@deater.net>
Link: http://lkml.kernel.org/r/1437490509-15373-1-git-send-email-matt@codeblueprint.co.uk
Link: http://lkml.kernel.org/n/tip-3p4ra0u8vzm7m289a1m799kf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move out the x86-specific tests into tools/perf/arch/x86/tests and
define an 'arch_tests' array, which is the list of tests that only apply
to the build architecture.
We can also now begin to get rid of some of the #ifdef code that is
present in the generic perf tests.
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kanaka Juvva <kanaka.d.juvva@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vikas Shivappa <vikas.shivappa@intel.com>
Cc: Vince Weaver <vince@deater.net>
Link: http://lkml.kernel.org/n/tip-9s68h4ptg06ah0lgnjz55mqn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tests that only make sense for some architectures currently live in
the same place as the generic tests. Move out the x86-specific tests
into tools/perf/arch/x86/tests and define an 'arch_tests' array, which
is the list of tests that only apply to the build architecture.
The main idea is to encourage developers to add arch tests to build
out perf's test coverage, without dumping everything in
tools/perf/tests.
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kanaka Juvva <kanaka.d.juvva@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vikas Shivappa <vikas.shivappa@intel.com>
Cc: Vince Weaver <vince@deater.net>
Link: http://lkml.kernel.org/n/tip-p4uc1c15ssbj8xj7ku5slpa6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding handling for '-h' and '-v' options to invoke help and version
command respectively.
Current behaviour is:
$ perf -v
Unknown option: -v
Usage: perf [--version] [--help] [OPTIONS] COMMAND [ARGS]
$ perf -h
Unknown option: -h
Usage: perf [--version] [--help] [OPTIONS] COMMAND [ARGS]
New behaviour:
$ perf -h
usage: perf [--version] [--help] [OPTIONS] COMMAND [ARGS]
The most commonly used perf commands are:
annotate Read perf.data (created by perf record) and display annotated code
archive Create archive with object files with build-ids found in perf.data file
bench General framework for benchmark suites
...
$ perf -v
perf version 4.3.rc3.gc99e32
Updated man page.
Requested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444068369-20978-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to properly initialize column width for symbol_iaddr field, so
all symbols could fit in the column.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444068369-20978-9-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sorting on 'symbol' gives to broad a resolution as it can cover a range
of IP address. Use the iaddr instead to get proper sorting on IP
addresses. Need to use the 'mem_sort' feature of perf record.
New sort option is: symbol_iaddr, header label is 'Code Symbol'.
$ perf mem report --stdio -F +symbol_iaddr
# Overhead Samples Code Symbol Local Weight
# ........ ............ ........................ ............
#
54.08% 1 [k] nmi_handle 192
4.51% 1 [k] finish_task_switch 16
3.66% 1 [.] malloc 13
3.10% 1 [.] __strcoll_l 11
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444068369-20978-8-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We cant test 'P' modifier gets properly parsed, the functionality test
itself is beyond this suite.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444068369-20978-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'P' will cause the event to get maximum possible detected precise
level.
Following record:
$ perf record -e cycles:P ...
will detect maximum precise level for 'cycles' event and use it.
Commiter note:
Testing it:
$ perf record -e cycles:P usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data (9 samples) ]
$ perf evlist
cycles:P
$ perf evlist -v
cycles:P: size: 112, { sample_period, sample_freq }: 4000, sample_type:
IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1,
enable_on_exec: 1, task: 1, precise_ip: 2, sample_id_all: 1, mmap2: 1,
comm_exec: 1
$
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444068369-20978-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It'll be used in following patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444068369-20978-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The annotated_source::sizeof_sym_hist could easily overflow int size,
resulting in crash in __symbol__inc_addr_samples.
Changing its type int size_t as was probably intended from beginning
based on the initialization code in symbol__alloc_hist.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444068369-20978-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Because there's no point, PATH_MAX is big enough.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444068369-20978-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
