Dual EMAC slave VLAN id must be got from slave node instead of cpsw node as
VLAN id for each slave will be different.
Reported-by: Mark Jackson <mpfj-list@mimc.co.uk>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mvneta_tx() was using a static tx queue number causing crashes as
soon as a little bit of traffic was sent via the interface, because
it is normally expected that the same queue should be used as in
dev_queue_xmit().
As suggested by Ben Hutchings, let's use skb_get_queue_mapping() to
get the proper Tx queue number, and use alloc_etherdev_mqs() instead
of alloc_etherdev_mq() to create the queues.
Both my Mirabox and my OpenBlocks AX3 used to crash without this patch
and don't anymore with it. The issue appeared in 3.8 but became more
visible after the fix allowing GSO to be enabled.
Original work was done by Dmitri Epshtein and Thomas Petazzoni. I
just adapted it to take care of Ben's comments.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Cc: Dmitri Epshtein <dima@marvell.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Ben Hutchings <bhutchings@solarflare.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix to return a negative error code from the error handling
case instead of 0, as returned elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Keep a STP port path cost value if it was set by a user.
Don't replace it with the link-speed based path cost
whenever the link goes down and comes back up.
Reported-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull {timer,irq,core} fixes from Thomas Gleixner:
- timer: bug fix for a cpu hotplug race.
- irq: single bugfix for a wrong return value, which prevents the
calling function to invoke the software fallback.
- core: bugfix which plugs two race confitions which can cause hotplug
per cpu threads to end up on the wrong cpu.
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimer: Don't reinitialize a cpu_base lock on CPU_UP
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: gic: fix irq_trigger return
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kthread: Prevent unpark race which puts threads on the wrong cpu
The cx25821 driver has support for one audio output channel and two video
output channels.
This is implemented in a very ugly and very evil way through a custom ioctl
that passes the filename of a file containing the video data, which is then
read by the driver itself using vfs.
There are a number of problems with this:
1) it's very ugly and very evil (I can't say that often enough).
2) V4L2 supports video output, so why not use that?
3) it's very buggy, closing the filehandle through which you passed the ioctl
will oops the kernel.
4) it's a nasty security leak since this allows you to load any file in the
system as a video or audio source, so in theory you can output /etc/passwd
to audio or video out and record & decode it on another device.
Because of all these issues we no longer register those output video nodes.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Trinity discovered that we fail to check all 64 bits of
attr.config passed by user space, resulting to out-of-bounds
access of the perf_swevent_enabled array in
sw_perf_event_destroy().
Introduced in commit b0a873ebb ("perf: Register PMU
implementations").
Signed-off-by: Tommi Rantala <tt.rantala@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: davej@redhat.com
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/1365882554-30259-1-git-send-email-tt.rantala@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A label 0 was missed in the patch a9c4e541 (powerpc/kprobe: Complete
kprobe and migrate exception frame). This will cause the kernel
branch to an undetermined address if there really has a conflict when
updating the thread flags.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Cc: stable@vger.kernel.org
Acked-By: Tiejun Chen <tiejun.chen@windriver.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
The current mainline crashes when hitting userspace with the following:
kernel BUG at kernel/auditsc.c:1769!
cpu 0x1: Vector: 700 (Program Check) at [c000000023883a60]
pc: c0000000001047a8: .__audit_syscall_entry+0x38/0x130
lr: c00000000000ed64: .do_syscall_trace_enter+0xc4/0x270
sp: c000000023883ce0
msr: 8000000000029032
current = 0xc000000023800000
paca = 0xc00000000f080380 softe: 0 irq_happened: 0x01
pid = 1629, comm = start_udev
kernel BUG at kernel/auditsc.c:1769!
enter ? for help
[c000000023883d80] c00000000000ed64 .do_syscall_trace_enter+0xc4/0x270
[c000000023883e30] c000000000009b08 syscall_dotrace+0xc/0x38
--- Exception: c00 (System Call) at 0000008010ec50dc
Bisecting found the following patch caused it:
commit 44e9309f1f
Author: Haren Myneni <haren@linux.vnet.ibm.com>
powerpc: Implement PPR save/restore
It was found this patch corrupted r9 when calling
SET_DEFAULT_THREAD_PPR()
Using r10 as a scratch register instead of r9 solved the problem.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Changing uid/gid/projid mappings doesn't change your id within the
namespace; it reconfigures the namespace. Unprivileged programs should
*not* be able to write these files. (We're also checking the privileges
on the wrong task.)
Given the write-once nature of these files and the other security
checks, this is likely impossible to usefully exploit.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
When we require privilege for setting /proc/<pid>/uid_map or
/proc/<pid>/gid_map no longer allow an unprivileged user to
open the file and pass it to a privileged program to write
to the file.
Instead when privilege is required require both the opener and the
writer to have the necessary capabilities.
I have tested this code and verified that setting /proc/<pid>/uid_map
fails when an unprivileged user opens the file and a privielged user
attempts to set the mapping, that unprivileged users can still map
their own id, and that a privileged users can still setup an arbitrary
mapping.
Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Tomas reported the following build error:
net/built-in.o: In function `ieee80211_unregister_hw':
(.text+0x10f0e1): undefined reference to `unregister_inet6addr_notifier'
net/built-in.o: In function `ieee80211_register_hw':
(.text+0x10f610): undefined reference to `register_inet6addr_notifier'
make: *** [vmlinux] Error 1
when built IPv6 as a module.
So we have to statically link these symbols.
Reported-by: Tomas Melin <tomas.melin@iki.fi>
Cc: Tomas Melin <tomas.melin@iki.fi>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: YOSHIFUJI Hidaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull x86 fixes from Ingo Molnar:
"Misc fixes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Flush lazy MMU when DEBUG_PAGEALLOC is set
x86/mm/cpa/selftest: Fix false positive in CPA self test
x86/mm/cpa: Convert noop to functional fix
x86, mm: Patch out arch_flush_lazy_mmu_mode() when running on bare metal
x86, mm, paravirt: Fix vmalloc_fault oops during lazy MMU updates
Pull scheduler fixes from Ingo Molnar:
"Misc fixlets"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/cputime: Fix accounting on multi-threaded processes
sched/debug: Fix sd->*_idx limit range avoiding overflow
sched_clock: Prevent 64bit inatomicity on 32bit systems
sched: Convert BUG_ON()s in try_to_wake_up_local() to WARN_ON_ONCE()s
Pull drm fixes from Dave Airlie:
"One fix for a hotplug locking regressions, and one fix for an oops if
you unplug the monitor at an inopportune moment on the udl device."
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/fb-helper: Fix locking in drm_fb_helper_hotplug_event
udl: handle EDID failure properly.
Pull m68knommu fix from Greg Ungerer:
"This contains only a single compilation fix for ColdFire m68k targets
that use local non-GPIOLIB support."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: define a local gpio_request_one() function
Pull watchdog fix from Wim Van Sebroeck:
"It will fix compile errors for the at91rm9200_wdt driver"
* git://www.linux-watchdog.org/linux-watchdog:
watchdog: Revert the AT91RM9200_WATCHDOG dependency
Pull one more btrfs fix from Chris Mason:
"This has a recent fix from Josef for our tree log replay code. It
fixes problems where the inode counter for the number of bytes in the
file wasn't getting updated properly during fsync replay.
The commit did get rebased this morning, but it was only to clean up
the subject line. The code hasn't changed."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: make sure nbytes are right after log replay
doing: echo 1234 | tee -a /sys/kernel/debug/tracing/set_ftrace_pid
Luckily, this can only be done by root, but still is a nasty bug.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJRaK2+AAoJEOdOSU1xswtMw48IAJPcSNMl1+epx5cPw8pwf+y6
YYvs/Ud3BMPBL+mpNPGNFWY+dWJsAtCtAgkLi0WgdL+b9iPNZrmQqqcP5xWV4uKV
vRX2SPCQcyEn5keNnFdN3fN1R0+Gj4V8kLvxPqugzNrO9EHejx+TJFWjrONzkcSy
g90lY45jfGWW0OS4GuSwHFhKDgcx8/kgb4Whv+xrKzTuX2QkU1BhG9WPsjiHWiL5
WRYjC4LWafrWaPd4cIkzMqj1eU/hL8BkiLLQHM1Tw8yD7t8OPzgmuJMZEh6Cx1iW
/Xrm5QkNEcqQ/vSAC6aWUi22VEgRYDLg8WjngwuMgY1Qa3LE2ex8cUDyk7lJbas=
=SFA8
-----END PGP SIGNATURE-----
Merge tag 'trace-fixes-v3.9-rc-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull ftrace fixes from Steven Rostedt:
"Namhyung Kim found and fixed a bug that can crash the kernel by simply
doing: echo 1234 | tee -a /sys/kernel/debug/tracing/set_ftrace_pid
Luckily, this can only be done by root, but still is a nasty bug."
* tag 'trace-fixes-v3.9-rc-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Move ftrace_filter_lseek out of CONFIG_DYNAMIC_FTRACE section
tracing: Fix possible NULL pointer dereferences
Nothing is using it yet, but this will allow us to delay the open-time
checks to use time, without breaking the normal UNIX permission
semantics where permissions are determined by the opener (and the file
descriptor can then be passed to a different process, or the process can
drop capabilities).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Compiling the at91rm9200_wdt.c driver without at91rm9200
support was leading to several errors:
drivers/built-in.o: In function `at91_wdt_close':
at91_adc.c:(.text+0xc9fe4): undefined reference to `at91_st_base'
drivers/built-in.o: In function `at91_wdt_write':
at91_adc.c:(.text+0xca004): undefined reference to `at91_st_base'
drivers/built-in.o: In function `at91wdt_shutdown':
at91_adc.c:(.text+0xca01c): undefined reference to `at91_st_base'
drivers/built-in.o: In function `at91wdt_suspend':
at91_adc.c:(.text+0xca038): undefined reference to `at91_st_base'
drivers/built-in.o: In function `at91_wdt_open':
at91_adc.c:(.text+0xca0cc): undefined reference to `at91_st_base'
drivers/built-in.o:at91_adc.c:(.text+0xca2c8): more undefined references to
`at91_st_base' follow
So, reverting the modification of the "depends" Kconfig line
introduced by patch a6a1bcd37 (watchdog: at91rm9200: add DT support)
seems to be the good solution.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Revert commit 62a3ddef61 ("vfs: fix spinning prevention in prune_icache_sb").
This commit doesn't look right: since we are looking at the tail of the
list (sb->s_inode_lru.prev) if we want to skip an inode, we should put
it back at the head of the list instead of the tail, otherwise we will
keep spinning on it.
Discovered when investigating why prune_icache_sb came top in perf
reports of a swapping load.
Signed-off-by: Suleiman Souhlal <suleiman@google.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: stable@vger.kernel.org # v3.2+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Anatol Pomozov identified a race condition that hits module unloading
and re-loading. To quote Anatol:
"This is a race codition that exists between kset_find_obj() and
kobject_put(). kset_find_obj() might return kobject that has refcount
equal to 0 if this kobject is freeing by kobject_put() in other
thread.
Here is timeline for the crash in case if kset_find_obj() searches for
an object tht nobody holds and other thread is doing kobject_put() on
the same kobject:
THREAD A (calls kset_find_obj()) THREAD B (calls kobject_put())
splin_lock()
atomic_dec_return(kobj->kref), counter gets zero here
... starts kobject cleanup ....
spin_lock() // WAIT thread A in kobj_kset_leave()
iterate over kset->list
atomic_inc(kobj->kref) (counter becomes 1)
spin_unlock()
spin_lock() // taken
// it does not know that thread A increased counter so it
remove obj from list
spin_unlock()
vfree(module) // frees module object with containing kobj
// kobj points to freed memory area!!
kobject_put(kobj) // OOPS!!!!
The race above happens because module.c tries to use kset_find_obj()
when somebody unloads module. The module.c code was introduced in
commit 6494a93d55fa"
Anatol supplied a patch specific for module.c that worked around the
problem by simply not using kset_find_obj() at all, but rather than make
a local band-aid, this just fixes kset_find_obj() to be thread-safe
using the proper model of refusing the get a new reference if the
refcount has already dropped to zero.
See examples of this proper refcount handling not only in the kref
documentation, but in various other equivalent uses of this pattern by
grepping for atomic_inc_not_zero().
[ Side note: the module race does indicate that module loading and
unloading is not properly serialized wrt sysfs information using the
module mutex. That may require further thought, but this is the
correct fix at the kobject layer regardless. ]
Reported-analyzed-and-tested-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The mvmdio driver uses the phylib API, so it should select the PHYLIB
symbol, otherwise, a build with mvmdio (but without mvneta) fails to
build with undefined symbols such as mdiobus_unregister, mdiobus_free,
etc.
The mvneta driver does not use the phylib API directly, so it does not
need to select PHYLIB. It already selects the mvmdio driver anyway.
Historically, this problem is due to the fact that the PHY handling
was originally part of mvneta, and was later moved to a separate
driver, without updating the Kconfig select statements
accordingly. And since there was no functional reason to use mvmdio
without mvneta, this case was not tested.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While trying to track down a tree log replay bug I noticed that fsck was always
complaining about nbytes not being right for our fsynced file. That is because
the new fsync stuff doesn't wait for ordered extents to complete, so the inodes
nbytes are not necessarily updated properly when we log it. So to fix this we
need to set nbytes to whatever it is on the inode that is on disk, so when we
replay the extents we can just add the bytes that are being added as we replay
the extent. This makes it work for the case that we have the wrong nbytes or
the case that we logged everything and nbytes is actually correct. With this
I'm no longer getting nbytes errors out of btrfsck.
Cc: stable@vger.kernel.org
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
This patch attempts to fix:
https://bugzilla.kernel.org/show_bug.cgi?id=56461
The symptom is a crash and messages like this:
chrome: Corrupted page table at address 34a03000
*pdpt = 0000000000000000 *pde = 0000000000000000
Bad pagetable: 000f [#1] PREEMPT SMP
Ingo guesses this got introduced by commit 611ae8e3f5 ("x86/tlb:
enable tlb flush range support for x86") since that code started to free
unused pagetables.
On x86-32 PAE kernels, that new code has the potential to free an entire
PMD page and will clear one of the four page-directory-pointer-table
(aka pgd_t entries).
The hardware aggressively "caches" these top-level entries and invlpg
does not actually affect the CPU's copy. If we clear one we *HAVE* to
do a full TLB flush, otherwise we might continue using a freed pmd page.
(note, we do this properly on the population side in pud_populate()).
This patch tracks whenever we clear one of these entries in the 'struct
mmu_gather', and ensures that we follow up with a full tlb flush.
BTW, I disassembled and checked that:
if (tlb->fullmm == 0)
and
if (!tlb->fullmm && !tlb->need_flush_all)
generate essentially the same code, so there should be zero impact there
to the !PAE case.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Artem S Tashkinov <t.artem@mailcity.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull SCSI target fixes from Nicholas Bellinger:
"Here are remaining target-pending items for v3.9-rc7 code.
The tcm_vhost patches are more than I'd usually include in a -rc7
pull, but are changes required for v3.9 to work correctly with the
pending vhost-scsi-pci QEMU upstream series merge. (Paolo CC'ed)
Plus Asias's conversion to use vhost_virtqueue->private_data + RCU for
managing vhost-scsi endpoints has gotten alot of review + testing over
the past weeks, and MST has ACKed the full series.
Also, there is a target patch to fix a long-standing bug within
control CDB handling with Standby/Offline/Transition ALUA port access
states, that had been incorrectly rejecting the control CDBs required
for LUN scan to work during these port group states. CC'ing to
stable."
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
target: Fix incorrect fallthrough of ALUA Standby/Offline/Transition CDBs
tcm_vhost: Send bad target to guest when cmd fails
tcm_vhost: Add vhost_scsi_send_bad_target() helper
tcm_vhost: Fix tv_cmd leak in vhost_scsi_handle_vq
tcm_vhost: Remove double check of response
tcm_vhost: Initialize vq->last_used_idx when set endpoint
tcm_vhost: Use vq->private_data to indicate if the endpoint is setup
tcm_vhost: Use ACCESS_ONCE for vs->vs_tpg[target] access
This is a set of ten bug fixes (and two consisting of copyright year update
and version number change) pretty much all of which involve either a crash or
a hang except the removal of the random sleep from the qla2xxx driver (which
is a coding error so bad, we want it gone before anyone has a chance to copy
it).
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iQEcBAABAgAGBQJRaE+2AAoJEDeqqVYsXL0MeuoH/2kwVhnqMrlzu+5ROY+0+MsY
7rqSJImGvEWYAU/MawV1ujV0rMpxupZ1qMJvRtcZapyiMtz/Ms9lVm4YIqdPWnIr
HCxSIviC5RtAkRObFX6vQoYXhRL73TyyndV/1lM363sDyLgIKfb6F3F7jsPV04DI
28AqIzi7tVfhgLhI4whcbVGxocqldbwmJehZPVqzNskPbj/7l2S21IVezc9jwIhz
LjP6kYr9l9NtSDI2XvjiQ0TMTpJs+F+9rR1cPuT8CcEIzOBSql2Vpi186qO97rdI
owzzLKrm/jo7bjMkIuaf7FbGw+l5TjteR71KVRTaYgqotRRd7W1UT6A7xjqM4EI=
=6vuV
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a set of ten bug fixes (and two consisting of copyright year
update and version number change) pretty much all of which involve
either a crash or a hang except the removal of the random sleep from
the qla2xxx driver (which is a coding error so bad, we want it gone
before anyone has a chance to copy it)."
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
[SCSI] lpfc: fix potential NULL pointer dereference in lpfc_sli4_rq_put()
[SCSI] libsas: fix handling vacant phy in sas_set_ex_phy()
[SCSI] ibmvscsi: Fix slave_configure deadlock
[SCSI] qla2xxx: Update the driver version to 8.04.00.13-k.
[SCSI] qla2xxx: Remove debug code that msleeps for random duration.
[SCSI] qla2xxx: Update copyright dates information in LICENSE.qla2xxx file.
[SCSI] qla2xxx: Fix crash during firmware dump procedure.
[SCSI] Revert "qla2xxx: Add setting of driver version string for vendor application."
[SCSI] ipr: dlpar failed when adding an adapter back
[SCSI] ipr: fix addition of abort command to HRRQ free queue
[SCSI] st: Take additional queue ref in st_probe
[SCSI] libsas: use right function to alloc smp response
[SCSI] ipr: ipr_test_msi() fails when running with msi-x enabled adapter
Pull CIFS fix from Steve French:
"Fixes a regression in cifs in which a password which begins with a
comma is parsed incorrectly as a blank password"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Allow passwords which begin with a delimitor
As ftrace_filter_lseek is now used with ftrace_pid_fops, it needs to
be moved out of the #ifdef CONFIG_DYNAMIC_FTRACE section as the
ftrace_pid_fops is defined when DYNAMIC_FTRACE is not.
Cc: stable@vger.kernel.org
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
(Adapted from a very similar change to net/802/garp.c by Cong Wang.)
mrp_pdu_queue() should ways be called with the applicant spin lock.
mrp_uninit_applicant() only holds the rtnl lock which is not enough;
a race is possible because mrp_rcv() is called in BH context:
mrp_rcv()
|->mrp_pdu_parse_msg()
|->mrp_pdu_parse_vecattr()
|->mrp_pdu_parse_vecattr_event()
|-> mrp_attr_event()
|-> mrp_pdu_append_vecattr_event()
|-> mrp_pdu_queue()
Cc: Cong Wang <amwang@redhat.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Acked-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix to return a negative error code from the error handling
case instead of 0, as returned elsewhere in this function.
[ Bug added in linux-3.8 , commit 4008e97f86
("tuntap: fix ambigious multiqueue API") ]
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver should use return value of __vlan_put_tag with appropriate
NULL-check instead of old skb pointer.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently set_ftrace_pid and set_graph_function files use seq_lseek
for their fops. However seq_open() is called only for FMODE_READ in
the fops->open() so that if an user tries to seek one of those file
when she open it for writing, it sees NULL seq_file and then panic.
It can be easily reproduced with following command:
$ cd /sys/kernel/debug/tracing
$ echo 1234 | sudo tee -a set_ftrace_pid
In this example, GNU coreutils' tee opens the file with fopen(, "a")
and then the fopen() internally calls lseek().
Link: http://lkml.kernel.org/r/1365663302-2170-1-git-send-email-namhyung@kernel.org
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: stable@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Marc Kleine-Budde says:
====================
here's another fix for the v3.9 release cycle, if not too late:
Christoph Fritz fixed the device tree property handling on little endian
systems in the sja1000 device tree driver. It was Mylene Josserand who noticed
that the mcp251x spi CAN driver cannot request its interrupt anymore, as the
driver is using a threaded interrupt handler without a primary one and without
specifying IRQF_ONESHOT (which is needed since v3.5). A patch by me fixes this
problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
The following patchset contains late netfilter fixes for your net
tree, they are:
* Don't drop segmented TCP packets in the SIP helper, we've got reports
from users that this was breaking communications when the SIP phone
messages are larger than the MTU, from Patrick McHardy.
* Fix refcount leak in the ipset list set, from Jozsef Kadlecsik.
* On hash set resizing, the nomatch flag was lost, thus entirely inverting
the logic of the set matching, from Jozsef Kadlecsik.
* Fix crash on NAT modules removal. Timer expiration may race with the
module cleanup exit path while deleting conntracks, from Florian
Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The hardware parsing of Control Wrapper Frames needs to be disabled, as
it has been causing spurious decryption error reports. The initvals for
other chips have been updated to disable it, but AR9580 was left out for
some reason.
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This contains a few small ASoC fixes (wm8903, wm5102, samsung-i2s,
tegra, and soc-compress) and an endian fix for NI USB-audio devices,
update for Mark's e-mail address.
No scary changes, AFAIS.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=JKpk
-----END PGP SIGNATURE-----
Merge tag 'sound-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This contains a few small ASoC fixes (wm8903, wm5102, samsung-i2s,
tegra, and soc-compress) and an endian fix for NI USB-audio devices,
update for Mark's e-mail address.
No scary changes, AFAIS."
* tag 'sound-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
MAINTAINERS: Update e-mail address
ASoC: wm5102: Correct lookup of arizona struct in SYSCLK event
ASoC: wm8903: Fix the bypass to HP/LINEOUT when no DAC or ADC is running
ALSA: usb-audio: fix endianness bug in snd_nativeinstruments_*
ASoC: tegra: Don't claim to support PCM pause and resume
ASoC: Samsung: set drvdata before adding secondary device
ASoC: Samsung: return error if drvdata is not set
ASoC: compress: Cancel delayed power down if needed
ASoC: core: Fix to check return value of snd_soc_update_bits_locked()
The smpboot threads rely on the park/unpark mechanism which binds per
cpu threads on a particular core. Though the functionality is racy:
CPU0 CPU1 CPU2
unpark(T) wake_up_process(T)
clear(SHOULD_PARK) T runs
leave parkme() due to !SHOULD_PARK
bind_to(CPU2) BUG_ON(wrong CPU)
We cannot let the tasks move themself to the target CPU as one of
those tasks is actually the migration thread itself, which requires
that it starts running on the target cpu right away.
The solution to this problem is to prevent wakeups in park mode which
are not from unpark(). That way we can guarantee that the association
of the task to the target cpu is working correctly.
Add a new task state (TASK_PARKED) which prevents other wakeups and
use this state explicitly for the unpark wakeup.
Peter noticed: Also, since the task state is visible to userspace and
all the parked tasks are still in the PID space, its a good hint in ps
and friends that these tasks aren't really there for the moment.
The migration thread has another related issue.
CPU0 CPU1
Bring up CPU2
create_thread(T)
park(T)
wait_for_completion()
parkme()
complete()
sched_set_stop_task()
schedule(TASK_PARKED)
The sched_set_stop_task() call is issued while the task is on the
runqueue of CPU1 and that confuses the hell out of the stop_task class
on that cpu. So we need the same synchronizaion before
sched_set_stop_task().
Reported-by: Dave Jones <davej@redhat.com>
Reported-and-tested-by: Dave Hansen <dave@sr71.net>
Reported-and-tested-by: Borislav Petkov <bp@alien8.de>
Acked-by: Peter Ziljstra <peterz@infradead.org>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: dhillf@gmail.com
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1304091635430.21884@ionos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Update the e-mail address I use for subsystems.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=qSGU
-----END PGP SIGNATURE-----
Merge tag 'asoc-maintainers-v3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
MAINTAINERS: Update e-mail address
Update the e-mail address I use for subsystems.
To get correct endianes on little endian cpus (like arm) while reading device
tree properties, this patch replaces of_get_property() with
of_property_read_u32(). While there use of_property_read_bool() for the
handling of the boolean "nxp,no-comparator-bypass" property.
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Since commit:
1c6c695 genirq: Reject bogus threaded irq requests
threaded irqs must provide a primary handler or set the IRQF_ONESHOT flag.
Since the mcp251x driver doesn't make use of a primary handler set the
IRQF_ONESHOT flag.
Cc: linux-stable <stable@vger.kernel.org> # >= v3.5
Reported-by: Mylene Josserand <Mylene.Josserand@navocap.com>
Tested-by: Mylene Josserand <Mylene.Josserand@navocap.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
following oops was reported:
RIP: 0010:[<ffffffffa03227f2>] [<ffffffffa03227f2>] nf_nat_cleanup_conntrack+0x42/0x70 [nf_nat]
RSP: 0018:ffff880202c63d40 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8801ac7bec28 RCX: ffff8801d0eedbe0
RDX: dead000000200200 RSI: 0000000000000011 RDI: ffffffffa03265b8
[..]
Call Trace:
[..]
[<ffffffffa02febed>] destroy_conntrack+0xbd/0x110 [nf_conntrack]
Happens when a conntrack timeout expires right after first part
of the nat cleanup has completed (bysrc hash removal), but before
part 2 has completed (re-initialization of nat area).
[ destroy callback tries to delete bysrc again ]
Patrick suggested to just remove the affected conntracks -- the
connections won't work properly anyway without nat transformation.
So, lets do that.
Reported-by: CAI Qian <caiqian@redhat.com>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
A few updates, more than I'd like, fixing some relatively small issues
but mostly driver specific ones. Nothing wildly exciting so if it
doesn't make v3.9 it won't be the end of the world but it'd be nice.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=W1XN
-----END PGP SIGNATURE-----
Merge tag 'asoc-v3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v3.9
A few updates, more than I'd like, fixing some relatively small issues
but mostly driver specific ones. Nothing wildly exciting so if it
doesn't make v3.9 it won't be the end of the world but it'd be nice.
