The max5970 datasheet gives the impression that IRQ status bits must
be cleared by writing a one to set bits, as those are marked with 'R/C',
however tests showed that a zero must be written.
Fixes an IRQ storm as the interrupt handler actually clears the IRQ
status bits.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Link: https://msgid.link/r/20240130150257.3643657-1-naresh.solanki@9elements.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can't use devm_platform_ioremap_resource_byname() to remap the
interrupt register that can be shared between
regulator-abb-{ivahd,dspeve,gpu} drivers instances.
The combined helper introduce a call to devm_request_mem_region() that
creates a new busy resource region on PRM_IRQSTATUS_MPU register
(0x4ae06010). The first devm_request_mem_region() call succeeds for
regulator-abb-ivahd but fails for the two other regulator-abb-dspeve
and regulator-abb-gpu.
# cat /proc/iomem | grep -i 4ae06
4ae06010-4ae06013 : 4ae07e34.regulator-abb-ivahd int-address
4ae06014-4ae06017 : 4ae07ddc.regulator-abb-mpu int-address
regulator-abb-dspeve and regulator-abb-gpu are missing due to
devm_request_mem_region() failure (EBUSY):
[ 1.326660] ti_abb 4ae07e30.regulator-abb-dspeve: can't request region for resource [mem 0x4ae06010-0x4ae06013]
[ 1.326660] ti_abb: probe of 4ae07e30.regulator-abb-dspeve failed with error -16
[ 1.327239] ti_abb 4ae07de4.regulator-abb-gpu: can't request region for resource [mem 0x4ae06010-0x4ae06013]
[ 1.327270] ti_abb: probe of 4ae07de4.regulator-abb-gpu failed with error -16
>From arm/boot/dts/dra7.dtsi:
The abb_mpu is the only instance using its own interrupt register:
(0x4ae06014) PRM_IRQSTATUS_MPU_2, ABB_MPU_DONE_ST (bit 7)
The other tree instances (abb_ivahd, abb_dspeve, abb_gpu) share
PRM_IRQSTATUS_MPU register (0x4ae06010) but use different bits
ABB_IVA_DONE_ST (bit 30), ABB_DSPEVE_DONE_ST( bit 29) and
ABB_GPU_DONE_ST (but 28).
The commit b36c6b1887 ("regulator: ti-abb: Make use of the helper
function devm_ioremap related") overlooked the following comment
implicitly explaining why devm_ioremap() is used in this case:
/*
* We may have shared interrupt register offsets which are
* write-1-to-clear between domains ensuring exclusivity.
*/
Fixes and partially reverts commit b36c6b1887 ("regulator: ti-abb:
Make use of the helper function devm_ioremap related").
Improve the existing comment to avoid further conversion to
devm_platform_ioremap_resource_byname().
Fixes: b36c6b1887 ("regulator: ti-abb: Make use of the helper function devm_ioremap related")
Signed-off-by: Romain Naour <romain.naour@skf.com>
Reviewed-by: Yoann Congal <yoann.congal@smile.fr>
Link: https://msgid.link/r/20240123111456.739381-1-romain.naour@smile.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Odroid-C1 uses a Monolithic Power Systems MP2161 controlled via PWM for
the VDDEE voltage supply of the Meson8b SoC. Commit 6b9352f3f8 ("pwm:
meson: modify and simplify calculation in meson_pwm_get_state") results
in my Odroid-C1 crashing with memory corruption in many different places
(seemingly at random). It turns out that this is due to a currently not
supported corner case.
The VDDEE regulator can generate between 860mV (duty cycle of ~91%) and
1140mV (duty cycle of 0%). We consider it to be enabled by the bootloader
(which is why it has the regulator-boot-on flag in .dts) as well as
being always-on (which is why it has the regulator-always-on flag in
.dts) because the VDDEE voltage is generally required for the Meson8b
SoC to work. The public S805 datasheet [0] states on page 17 (where "A5"
refers to the Cortex-A5 CPU cores):
[...] So if EE domains is shut off, A5 memory is also shut off. That
does not matter. Before EE power domain is shut off, A5 should be shut
off at first.
It turns out that at least some bootloader versions are keeping the PWM
output disabled. This is not a problem due to the specific design of the
regulator: when the PWM output is disabled the output pin is pulled LOW,
effectively achieving a 0% duty cycle (which in return means that VDDEE
voltage is at 1140mV).
The problem comes when the pwm-regulator driver tries to initialize the
PWM output. To do so it reads the current state from the hardware, which
is:
period: 3666ns
duty cycle: 3333ns (= ~91%)
enabled: false
Then those values are translated using the continuous voltage range to
860mV.
Later, when the regulator is being enabled (either by the regulator core
due to the always-on flag or first consumer - in this case the lima
driver for the Mali-450 GPU) the pwm-regulator driver tries to keep the
voltage (at 860mV) and just enable the PWM output. This is when things
start to go wrong as the typical voltage used for VDDEE is 1100mV.
Commit 6b9352f3f8 ("pwm: meson: modify and simplify calculation in
meson_pwm_get_state") triggers above condition as before that change
period and duty cycle were both at 0. Since the change to the pwm-meson
driver is considered correct the solution is to be found in the
pwm-regulator driver. Update the duty cycle during driver probe if the
regulator is flagged as boot-on so that a call to pwm_regulator_enable()
(by the regulator core during initialization of a regulator flagged with
boot-on) without any preceding call to pwm_regulator_set_voltage() does
not change the output voltage.
[0] https://dn.odroid.com/S805/Datasheet/S805_Datasheet%20V0.8%2020150126.pdf
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://msgid.link/r/20240113224628.377993-4-martin.blumenstingl@googlemail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If a PWM output is disabled then it's voltage has to be calculated
based on a zero duty cycle (for normal polarity) or duty cycle being
equal to the PWM period (for inverted polarity). Add support for this
to pwm_regulator_get_voltage().
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://msgid.link/r/20240113224628.377993-3-martin.blumenstingl@googlemail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Continuous regulators can be configured to operate only in a certain
duty cycle range (for example from 0..91%). Add a check to error out if
the duty cycle translates to an unsupported (or out of range) voltage.
Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://msgid.link/r/20240113224628.377993-2-martin.blumenstingl@googlemail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This contains a bunch of cleanups and simplifications across the board,
as well as a number of small fixes.
Perhaps the most notable change here is the addition of an API that
allows PWMs to be used in atomic contexts, which is useful when time-
critical operations are involved, such as using a PWM to generate IR
signals.
Finally, I have decided to step down as PWM subsystem maintainer. Due to
other responsibilities I have lately not been able to find the time that
the subsystem deserves and Uwe, who has been helping out a lot for the
past few years and has many things planned for the future, has kindly
volunteered to take over. I have no doubt that he will be a suitable
replacement.
-----BEGIN PGP SIGNATURE-----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=pIh8
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This contains a bunch of cleanups and simplifications across the
board, as well as a number of small fixes.
Perhaps the most notable change here is the addition of an API that
allows PWMs to be used in atomic contexts, which is useful when time-
critical operations are involved, such as using a PWM to generate IR
signals.
Finally, I have decided to step down as PWM subsystem maintainer. Due
to other responsibilities I have lately not been able to find the time
that the subsystem deserves and Uwe, who has been helping out a lot
for the past few years and has many things planned for the future, has
kindly volunteered to take over. I have no doubt that he will be a
suitable replacement"
* tag 'pwm/for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (44 commits)
MAINTAINERS: pwm: Thierry steps down, Uwe takes over
pwm: linux/pwm.h: fix Excess kernel-doc description warning
pwm: Add pwm_apply_state() compatibility stub
pwm: cros-ec: Drop documentation for dropped struct member
pwm: Drop two unused API functions
pwm: lpc18xx-sct: Don't modify the cached period of other PWM outputs
pwm: meson: Simplify using dev_err_probe()
pwm: stmpe: Silence duplicate error messages
pwm: Reduce number of pointer dereferences in pwm_device_request()
pwm: crc: Use consistent variable naming for driver data
pwm: omap-dmtimer: Drop locking
dt-bindings: pwm: ti,pwm-omap-dmtimer: Update binding for yaml
media: pwm-ir-tx: Trigger edges from hrtimer interrupt context
pwm: bcm2835: Allow PWM driver to be used in atomic context
pwm: Make it possible to apply PWM changes in atomic context
pwm: renesas: Remove unused include
pwm: Replace ENOTSUPP with EOPNOTSUPP
pwm: Rename pwm_apply_state() to pwm_apply_might_sleep()
pwm: Stop referencing pwm->chip
pwm: Update kernel doc for struct pwm_chip
...
Previously, the sequence number in the regulator event subsystem was
updated without atomic operations, potentially leading to race
conditions. This commit addresses the issue by making the sequence
number atomic.
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Link: https://msgid.link/r/20240104141314.3337037-1-naresh.solanki@9elements.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to introduce a pwm api which can be used from atomic context,
we will need two functions for applying pwm changes:
int pwm_apply_might_sleep(struct pwm *, struct pwm_state *);
int pwm_apply_atomic(struct pwm *, struct pwm_state *);
This commit just deals with renaming pwm_apply_state(), a following
commit will introduce the pwm_apply_atomic() function.
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Merge series from Fenglin Wu <quic_fenglinw@quicinc.com>:
There are 2 PM8010 PMICs present in sm8550-mtp/sm8550-qrd boards and
each of them exposes 7 LDOs. Add RPMH regulator support for them.
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
---
Changes in v2:
- Updated subject prefix in the dt-binding commit and fixed the typo.
- Separate the DTS commit with board name prefixes.
- Link to v1: https://lore.kernel.org/r/20231211-pm8010-regulator-v1-0-571e05fb4ecc@quicinc.com
---
Fenglin Wu (5):
regulator: qcom-rpmh: extend to support multiple linear voltage ranges
regulator: dt-bindings: qcom,rpmh: add compatible for pm8010
regulator: qcom-rpmh: add support for pm8010 regulators
arm64: dts: qcom: sm8550-mtp: Add pm8010 regulators
arm64: dts: qcom: sm8550-qrd: add PM8010 regulators
.../bindings/regulator/qcom,rpmh-regulator.yaml | 14 ++
arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 120 ++++++++++++++
arch/arm64/boot/dts/qcom/sm8550-qrd.dts | 120 ++++++++++++++
drivers/regulator/qcom-rpmh-regulator.c | 177 ++++++++++++++++++---
4 files changed, 405 insertions(+), 26 deletions(-)
---
base-commit: 753e4d5c43
change-id: 20231205-pm8010-regulator-0348cb19087a
Best regards,
--
Fenglin Wu <quic_fenglinw@quicinc.com>
Add RPMH regulators exposed by Qualcomm Technologies, Inc. PM8010
PMIC. It has 7 LDOs with 3 different types, LDO1 - LDO2 are L502
NMOS LDOs, LDO5 and LDO7 are L502 PMOS LDOs, LDO3/LDO4/LDO6 are
L502 PMOS LDO for low noise applications. Also, LDO3 - LDO7 don't
support LPM.
Suggested-by: David Collins <quic_collinsd@quicinc.com>
Reviewed-by: David Collins <quic_collinsd@quicinc.com>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
Link: https://msgid.link/r/20231214-pm8010-regulator-v2-3-82131df6b97b@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update rpmh_vreg_hw_data to support multiple linear voltage ranges for
potential regulators which have discrete voltage program ranges.
Suggested-by: David Collins <quic_collinsd@quicinc.com>
Reviewed-by: David Collins <quic_collinsd@quicinc.com>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
Link: https://msgid.link/r/20231214-pm8010-regulator-v2-1-82131df6b97b@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://msgid.link/r/1f7bbc545829a1cc3df40be0424fe46d7449fb72.1701778038.git.u.kleine-koenig@pengutronix.de
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://msgid.link/r/d9954f02ae51b1b0b0077c710d16bfaeafa216ec.1701778038.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://msgid.link/r/89c5f261707bf178e1508cf5dd55121f0da2dc3f.1701778038.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://msgid.link/r/ced2a73a1aeca3f33d4b194e4dbe2672ad84a50a.1701778038.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://msgid.link/r/2e96cf99c8d97b728d891a745e8f94ee39fbfee8.1701778038.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://msgid.link/r/fcaa42d7dd707031ed8dd9e8c28483891b879965.1701778038.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://msgid.link/r/639e796b36815a219ff1172cc758ba7378211d74.1701778038.git.u.kleine-koenig@pengutronix.de
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://msgid.link/r/76c7af01e2c8b3ab6585a04bc3f0d163fbb7fdf7.1701778038.git.u.kleine-koenig@pengutronix.de
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit introduces netlink event support to the regulator subsystem.
Changes:
- Introduce event.c and regnl.h for netlink event handling.
- Implement reg_generate_netlink_event to broadcast regulator events.
- Update Makefile to include the new event.c file.
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Link: https://lore.kernel.org/r/20231205105207.1262928-1-naresh.solanki@9elements.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Dang Huynh <danct12@riseup.net>:
PM8937 is a power management IC. It is used in various boards with
MSM8917, MSM8937, MSM8940 and APQ variants.
Pointer pdata is being initialized with a value that is never read. It is
being re-assigned later on with the return from a devm_kzalloc call.
Remove the redundant initialization, cleans up clang scan build warning:
drivers/regulator/palmas-regulator.c:1597:36: warning: Value stored
to 'pdata' during its initialization is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20231111195330.338324-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The use_count of a regulator should only be incremented when the
enable_count changes from 0 to 1. Similarly, the use_count should
only be decremented when the enable_count changes from 1 to 0.
In the previous implementation, use_count was sometimes decremented
to 0 when some consumer called unbalanced disable,
leading to unexpected disable even the regulator is enabled by
other consumers. With this change, the use_count accurately reflects
the number of users which the regulator is enabled.
This should make things more robust in the case where a consumer does
leak references.
Signed-off-by: Rui Zhang <zr.zhang@vivo.com>
Link: https://lore.kernel.org/r/20231103074231.8031-1-zr.zhang@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This may be useful for debugging and develompent purposes, when there are
drivers that depend on regulators to be enabled but do not request them.
It is inspired from the clk_ignore_unused and pd_ignore_unused parameters,
that are used to keep firmware-enabled clocks and power domains on even if
these are not used by drivers.
The parameter is not expected to be used in normal cases and should not be
needed on a platform with proper driver support.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231107190926.1185326-1-javierm@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add 'uv_survival_time' field to regulation_constraints for specifying
survival time post critical under-voltage event. Update the regulator
notifier call chain and Device Tree property parsing to use this new
field, allowing a configurable timeout before emergency shutdown.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20231026144824.4065145-6-o.rempel@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Handle under-voltage events for crucial regulators to maintain system
stability and avoid issues during power drops.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20231026144824.4065145-3-o.rempel@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The PM8937 is found on boards with MSM8917, MSM8937, MSM8940 SoCs and
APQ variants.
It provides 6 SMPS (two are controlled by SPMI) and 23 LDO regulators.
Signed-off-by: Dang Huynh <danct12@riseup.net>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231106-pm8937-v1-5-ec51d9eeec53@riseup.net
Signed-off-by: Mark Brown <broonie@kernel.org>
The PM8937 has 4 HFSMPS, 2 FTSMPS2.5 (for controlling APC voltage)
and 23 LDO regulators.
Add the configuration for this chip.
Signed-off-by: Dang Huynh <danct12@riseup.net>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231106-pm8937-v1-3-ec51d9eeec53@riseup.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Utilize the integrated 10-bit ADC in Max5970/Max5978 to enable voltage
and current monitoring. This feature is seamlessly integrated through
the hwmon subsystem.
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231027152830.1269895-1-naresh.solanki@9elements.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The type of the smps4 regulator from pm8550ve is actually FTSMPS525
medium voltage. So fix it accordingly.
Fixes: e6e3776d68 ("regulator: qcom-rpmh: Add support for PM8550 regulators")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20231024134626.2364426-1-abel.vesa@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support from RPMH regulators found in PMC8380 for SC8380XP platform.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231025135550.13162-3-quic_sibis@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add interrupt support for under-voltage notification. This functionality
can be used on systems capable to detect under-voltage state and having
enough capacity to let the SoC do some emergency preparation.
This change enforce default policy to shutdown system as soon as
interrupt is triggered.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20231025084614.3092295-6-o.rempel@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231017203442.2699322-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use preferred i2c_get_match_data() instead of of_match_device() to get
the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231017203429.2699039-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
If probe is reached, we've already matched the device and in the case of
DT matching, the struct device_node pointer will be set. Therefore, there
is no need to call of_match_device() in probe.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231017203507.2699826-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct da9063_regulators.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Support Opensource <support.opensource@diasemi.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230922175207.work.576-kees@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct da9062_regulators.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Support Opensource <support.opensource@diasemi.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230922175330.work.066-kees@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The DT bindings for MT6366 regulator defines the supply names for the
PMIC.
Add support for them by adding .supply_name field settings for each
regulator. The buck regulators each have their own supply whose name
can be derived from the regulator name. The LDOs have shared supplies.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230928085537.3246669-12-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When support for the MT6366 PMIC regulators was added, it was assumed
that it had the same functionality as MT6358. In reality there are
differences. A few regulators have different ranges, or were renamed
and repurposed, or removed altogether.
Add the 3 regulators that were missing from the original submission.
These are added for completeness. VSRAM_CORE is not used in existing
projects. VM18 and VMDDR feed DRAM related consumers, and are not used
in-kernel.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230928085537.3246669-11-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The VCN18 regulator on the MT6366 (only) actually has a wide
configurable range of voltages, even though its name suggests a fixed
output voltage.
Convert it from a fixed LDO to a configurable LDO. Its range of settings
is the same as the VM18 regulator, which is missing and will be added in
a subsequent patch.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230928085537.3246669-10-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The new MT6366 binding does away with the type prefix ("buck_", "ldo_")
in the regulator node names. This better matches the PMIC pin names.
Remaining underscores in names are also replaced with hyphens.
Drop the type prefixes and replace remaining underscores to match the
MT6366 binding.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230928085537.3246669-9-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The DT bindings for MT6358 regulator now defines the supply names for the
PMIC.
Add support for them by adding .supply_name field settings for each
regulator.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230928085537.3246669-8-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The (undocumented) possible values for the buck operating modes on the
MT6358 are the same as those on the MT6397, both for the device tree
bindings and the actual hardware register values.
Reuse the macros for the MT6397 PMIC in the MT6358 regulator driver by
including the mt6397-regulator.h binding header and replacing the
existing macros. This aligns it with other PMIC.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230928085537.3246669-7-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
