Commit Graph

211 Commits

Author SHA1 Message Date
Bjorn Helgaas
b440bde74f PCI: Add pci_ignore_hotplug() to ignore hotplug events for a device
Powering off a hot-pluggable device, e.g., with pci_set_power_state(D3cold),
normally generates a hot-remove event that unbinds the driver.

Some drivers expect to remain bound to a device even while they power it
off and back on again.  This can be dangerous, because if the device is
removed or replaced while it is powered off, the driver doesn't know that
anything changed.  But some drivers accept that risk.

Add pci_ignore_hotplug() for use by drivers that know their device cannot
be removed.  Using pci_ignore_hotplug() tells the PCI core that hot-plug
events for the device should be ignored.

The radeon and nouveau drivers use this to switch between a low-power,
integrated GPU and a higher-power, higher-performance discrete GPU.  They
power off the unused GPU, but they want to remain bound to it.

This is a reimplementation of f244d8b623 ("ACPIPHP / radeon / nouveau:
Fix VGA switcheroo problem related to hotplug") but extends it to work with
both acpiphp and pciehp.

This fixes a problem where systems with dual GPUs using the radeon drivers
become unusable, freezing every few seconds (see bugzillas below).  The
resume of the radeon device may also fail, e.g.,

This fixes problems on dual GPU systems where the radeon driver becomes
unusable because of problems while suspending the device, as in bug 79701:

    [drm] radeon: finishing device.
    radeon 0000:01:00.0: Userspace still has active objects !
    radeon 0000:01:00.0: ffff8800cb4ec288 ffff8800cb4ec000 16384 4294967297 force free
    ...
    WARNING: CPU: 0 PID: 67 at /home/apw/COD/linux/drivers/gpu/drm/radeon/radeon_gart.c:234 radeon_gart_unbind+0xd2/0xe0 [radeon]()
    trying to unbind memory from uninitialized GART !

or while resuming it, as in bug 77261:

    radeon 0000:01:00.0: ring 0 stalled for more than 10158msec
    radeon 0000:01:00.0: GPU lockup ...
    radeon 0000:01:00.0: GPU pci config reset
    pciehp 0000:00:01.0:pcie04: Card not present on Slot(1-1)
    radeon 0000:01:00.0: GPU reset succeeded, trying to resume
    *ERROR* radeon: dpm resume failed
    radeon 0000:01:00.0: Wait for MC idle timedout !

Link: https://bugzilla.kernel.org/show_bug.cgi?id=77261
Link: https://bugzilla.kernel.org/show_bug.cgi?id=79701
Reported-by: Shawn Starr <shawn.starr@rogers.com>
Reported-by: Jose P. <lbdkmjdf@sharklasers.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Rajat Jain <rajatxjain@gmail.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Dave Airlie <airlied@redhat.com>
CC: stable@vger.kernel.org	# v3.15+
2014-09-10 13:45:01 -06:00
David Herrmann
915b4d11b8 drm: add driver->set_busid() callback
One step closer to dropping all the drm_bus_* code:
Add a driver->set_busid() callback and make all drivers use the generic
helpers. Nouveau is the only driver that uses two different bus-types with
the same drm_driver. This is totally broken if both buses are available on
the same machine (unlikely, but lets be safe). Therefore, we create two
different drivers for each platform during module_init() and set the
set_busid() callback respectively.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-09-10 17:43:04 +10:00
Dave Airlie
484048db6b Merge branch 'drm-next-3.18' of git://people.freedesktop.org/~agd5f/linux into drm-next
radeon userptr support.

* 'drm-next-3.18' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: allow userptr write access under certain conditions
  drm/radeon: add userptr flag to register MMU notifier v3
  drm/radeon: add userptr flag to directly validate the BO to GTT
  drm/radeon: add userptr flag to limit it to anonymous memory v2
  drm/radeon: add userptr support v8

Conflicts:
	drivers/gpu/drm/radeon/radeon_prime.c
2014-08-26 09:05:14 +10:00
Alex Deucher
6e909f74db drm/radeon: add bapm module parameter
Add a module paramter to enable bapm on APUs.  It's disabled
by default on certain APUs due to stability issues.  This
option makes it easier to test and to enable it on systems that
are stable.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=81021

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2014-08-15 00:57:27 -04:00
Christian König
f72a113a71 drm/radeon: add userptr support v8
This patch adds an IOCTL for turning a pointer supplied by
userspace into a buffer object.

It imposes several restrictions upon the memory being mapped:

1. It must be page aligned (both start/end addresses, i.e ptr and size).

2. It must be normal system memory, not a pointer into another map of IO
space (e.g. it must not be a GTT mmapping of another object).

3. The BO is mapped into GTT, so the maximum amount of memory mapped at
all times is still the GTT limit.

4. The BO is only mapped readonly for now, so no write support.

5. List of backing pages is only acquired once, so they represent a
snapshot of the first use.

Exporting and sharing as well as mapping of buffer objects created by
this function is forbidden and results in an -EPERM.

v2: squash all previous changes into first public version
v3: fix tabs, map readonly, don't use MM callback any more
v4: set TTM_PAGE_FLAG_SG so that TTM never messes with the pages,
    pin/unpin pages on bind/unbind instead of populate/unpopulate
v5: rebased on 3.17-wip, IOCTL renamed to userptr, reject any unknown
    flags, better handle READONLY flag, improve permission check
v6: fix ptr cast warning, use set_page_dirty/mark_page_accessed on unpin
v7: add warning about it's availability in the API definition
v8: drop access_ok check, fix VM mapping bits

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v4)
Reviewed-by: Jérôme Glisse <jglisse@redhat.com> (v4)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-08-11 11:04:23 -04:00
Linus Torvalds
a7d7a143d0 Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull DRM updates from Dave Airlie:
 "Like all good pull reqs this ends with a revert, so it must mean we
  tested it,

[ Ed. That's _one_ way of looking at it ]

  This pull is missing nouveau, Ben has been stuck trying to track down
  a very longstanding bug that revealed itself due to some other
  changes.  I've asked him to send you a direct pull request for nouveau
  once he cleans things up.  I'm away until Monday so don't want to
  delay things, you can make a decision on that when he sends it, I have
  my phone so I can ack things just not really merge much.

  It has one trivial conflict with your tree in armada_drv.c, and also
  the pull request contains some component changes that are already in
  your tree, the base tree from Russell went via Greg's tree already,
  but some stuff still shows up in here that doesn't when I merge my
  tree into yours.

  Otherwise all pretty standard graphics fare, one new driver and
  changes all over the place.

  New drivers:
   - sti kms driver for STMicroelectronics chipsets stih416 and stih407.

  core:
   - lots of cleanups to the drm core
   - DP MST helper code merged
   - universal cursor planes.
   - render nodes enabled by default

  panel:
   - better panel interfaces
   - new panel support
   - non-continuous cock advertising ability

  ttm:
   - shrinker fixes

  i915:
   - hopefully ditched UMS support
   - runtime pm fixes
   - psr tracking and locking - now enabled by default
   - userptr fixes
   - backlight brightness fixes
   - MST support merged
   - runtime PM for dpms
   - primary planes locking fixes
   - gen8 hw semaphore support
   - fbc fixes
   - runtime PM on SOix sleep state hw.
   - mmio base page flipping
   - lots of vlv/chv fixes.
   - universal cursor planes

  radeon:
   - Hawaii fixes
   - display scalar support for non-fixed mode displays
   - new firmware format support
   - dpm on more asics by default
   - GPUVM improvements
   - uncached and wc GTT buffers
   - BOs > visible VRAM

  exynos:
   - i80 interface support
   - module auto-loading
   - ipp driver consolidated.

  armada:
   - irq handling in crtc layer only
   - crtc renumbering
   - add component support
   - DT interaction changes.

  tegra:
   - load as module fixes
   - eDP bpp and sync polarity fixed
   - DSI non-continuous clock mode support
   - better support for importing buffers from nouveau

  msm:
   - mdp5/adq8084 v1.3 hw enablement
   - devicetree clk changse
   - ifc6410 board working

  tda998x:
   - component support
   - DT documentation update

  vmwgfx:
   - fix compat shader namespace"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (551 commits)
  Revert "drm: drop redundant drm_file->is_master"
  drm/panel: simple: Use devm_gpiod_get_optional()
  drm/dsi: Replace upcasting macro by function
  drm/panel: ld9040: Replace upcasting macro by function
  drm/exynos: dp: Modify driver to support drm_panel
  drm/exynos: Move DP setup into commit()
  drm/panel: simple: Add AUO B133HTN01 panel support
  drm/panel: simple: Support delays in panel functions
  drm/panel: simple: Add proper definition for prepare and unprepare
  drm/panel: s6e8aa0: Add proper definition for prepare and unprepare
  drm/panel: ld9040: Add proper definition for prepare and unprepare
  drm/tegra: Add support for panel prepare and unprepare routines
  drm/exynos: dsi: Add support for panel prepare and unprepare routines
  drm/exynos: dpi: Add support for panel prepare and unprepare routines
  drm/panel: simple: Add dummy prepare and unprepare routines
  drm/panel: s6e8aa0: Add dummy prepare and unprepare routines
  drm/panel: ld9040: Add dummy prepare and unprepare routines
  drm/panel: Provide convenience wrapper for .get_modes()
  drm/panel: add .prepare() and .unprepare() functions
  drm/panel: simple: Remove simple-panel compatible
  ...
2014-08-07 17:36:12 -07:00
Mario Kleiner
39dc5454e3 drm/radeon: Use pflip irqs for pageflip completion if possible. (v2)
Skip the "manual" pageflip completion checks via polling and
guessing in the vblank handler radeon_crtc_handle_vblank() on
asics which are known to reliably support hw pageflip completion
irqs. Those pflip irqs are a more reliable and race-free method
of handling pageflip completion detection, whereas the "classic"
polling method has some small races in combination with dpm on,
and with the reworked pageflip implementation since Linux 3.16.

On old asics without pflip irqs, the classic method is used.

On asics with known good pflip irqs, only pflip irqs are used
by default, but a new module parameter "use_pflipirqs" allows to
override this in case we encounter asics in the wild with
unreliable or faulty pflip irqs. A module parameter of 0 allows
to use the classic method only in such a case. A parameter of 1
allows to use both classic method and pflip irqs as additional
band-aid to avoid some small races which could happen with the
classic method alone. The setting 1 gives Linux 3.16 behaviour.

Hw pflip irqs are available since R600.

Tested on DCE-4, AMD Cedar - FirePro 2270.

v2:  agd5f: only enable pflip interrupts on DCE4+ as they are not
reliable on older asics.

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-08-05 08:54:00 -04:00
Christian König
dfc230f9af drm/radeon: adjust default radeon_vm_block_size v2
v2: rebase on vm_size scale change. Adjust vm_size default to 8,
    Better handle the default and smaller values.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-08-05 08:53:52 -04:00
Michel Dänzer
72a9987edc drm/radeon: Always flush the HDP cache before submitting a CS to the GPU
This ensures the GPU sees all previous CPU writes to VRAM, which makes it
safe:

* For userspace to stream data from CPU to GPU via VRAM instead of GTT
* For IBs to be stored in VRAM instead of GTT
* For ring buffers to be stored in VRAM instead of GTT, if the HPD flush
  is performed via MMIO

Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-08-05 08:53:45 -04:00
Linus Torvalds
29b88e23a9 Driver core patches for 3.17-rc1
Here's the big driver-core pull request for 3.17-rc1.
 
 Largest thing in here is the dma-buf rework and fence code, that touched
 many different subsystems so it was agreed it should go through this
 tree to handle merge issues.  There's also some firmware loading
 updates, as well as tests added, and a few other tiny changes, the
 changelog has the details.
 
 All have been in linux-next for a long time.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlPf1XcACgkQMUfUDdst+ylREACdHLXBa02yLrRzbrONJ+nARuFv
 JuQAoMN49PD8K9iMQpXqKBvZBsu+iCIY
 =w8OJ
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here's the big driver-core pull request for 3.17-rc1.

  Largest thing in here is the dma-buf rework and fence code, that
  touched many different subsystems so it was agreed it should go
  through this tree to handle merge issues.  There's also some firmware
  loading updates, as well as tests added, and a few other tiny changes,
  the changelog has the details.

  All have been in linux-next for a long time"

* tag 'driver-core-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits)
  ARM: imx: Remove references to platform_bus in mxc code
  firmware loader: Fix _request_firmware_load() return val for fw load abort
  platform: Remove most references to platform_bus device
  test: add firmware_class loader test
  doc: fix minor typos in firmware_class README
  staging: android: Cleanup style issues
  Documentation: devres: Sort managed interfaces
  Documentation: devres: Add devm_kmalloc() et al
  fs: debugfs: remove trailing whitespace
  kernfs: kernel-doc warning fix
  debugfs: Fix corrupted loop in debugfs_remove_recursive
  stable_kernel_rules: Add pointer to netdev-FAQ for network patches
  driver core: platform: add device binding path 'driver_override'
  driver core/platform: remove unused implicit padding in platform_object
  firmware loader: inform direct failure when udev loader is disabled
  firmware: replace ALIGN(PAGE_SIZE) by PAGE_ALIGN
  firmware: read firmware size using i_size_read()
  firmware loader: allow disabling of udev as firmware loader
  reservation: add suppport for read-only access using rcu
  reservation: update api and add some helpers
  ...

Conflicts:
	drivers/base/platform.c
2014-08-04 18:34:04 -07:00
Christian König
20b2656d7e drm/radeon: let's use GB for vm_size (v2)
VM sizes smaller than 1GB doesn't make much sense anyway.

v2: fix typo and grammer

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-07-21 13:17:37 -04:00
Maarten Lankhorst
3aac4502fd dma-buf: use reservation objects
This allows reservation objects to be used in dma-buf. it's required
for implementing polling support on the fences that belong to a dma-buf.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com> #drivers/media/v4l2-core/
Acked-by: Thomas Hellstrom <thellstrom@vmware.com> #drivers/gpu/drm/ttm
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> #drivers/gpu/drm/armada/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-08 13:03:20 -07:00
Alex Deucher
a624f4290a drm/radeon: add a module parameter to control deep color support
Some monitors seem to have problems with deep color enabled, even
though they claim to support it.  I'm not sure if the monitor
need a quirk or if the driver is doing something the monitor doesn't
like.  At this point lets just disable deep color by default like
we did for hdmi audio and work through the bugs so we can eventually
enable it by default.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=80531

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-07-01 11:23:03 -04:00
Alex Deucher
65fcf668ee drm/radeon: add query for number of active CUs
Query to find out how many compute units on a GPU.
Useful for OpenCL usermode drivers.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-06-09 22:06:55 -04:00
Christian König
4510fb985d drm/radeon: make vm_block_size a module parameter
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-06-09 22:06:54 -04:00
Christian König
c1c4413258 drm/radeon: make VM size a module parameter (v2)
v2: agd5f: simplify patch

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-06-09 22:06:53 -04:00
Daniel Vetter
3c8413951c drm/<drivers>: don't set driver->dev_priv_size to 0
Especially not on modesetting drivers - this is used to size
the driver private structure for legacy drm buffers.

Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-23 10:32:54 +02:00
Dave Airlie
a42892ed10 Merge branch 'drm-next-3.15-wip' of git://people.freedesktop.org/~deathsimple/linux into drm-next
Some i2c fixes over DisplayPort.

* 'drm-next-3.15-wip' of git://people.freedesktop.org/~deathsimple/linux:
  drm/radeon: Improve vramlimit module param documentation
  drm/radeon: fix audio pin counts for DCE6+ (v2)
  drm/radeon/dp: switch to the common i2c over aux code
  drm/dp/i2c: Update comments about common i2c over dp assumptions (v3)
  drm/dp/i2c: send bare addresses to properly reset i2c connections (v4)
  drm/radeon/dp: handle zero sized i2c over aux transactions (v2)
  drm/i915: support address only i2c-over-aux transactions
  drm/tegra: dp: Support address-only I2C-over-AUX transactions
2014-04-19 11:16:02 +10:00
Alex Deucher
90c4cde9d5 drm/radeon: fix runpm handling on APUs (v4)
Don't try and runtime suspend the APU in PX systems.  We
only want to power down the dGPU.

v2: fix harder
v3: fix stupid typo
v4: consolidate runpm enablement to a single flag

bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=75127
https://bugzilla.kernel.org/show_bug.cgi?id=72701

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2014-04-17 13:59:38 +02:00
Lauri Kasanen
8902e6f2b8 drm/radeon: Improve vramlimit module param documentation
Signed-off-by: Lauri Kasanen <cand@gmx.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2014-04-08 17:44:15 +02:00
Dave Airlie
1d8eec8ba4 drm/radeon: fix runtime suspend breaking secondary GPUs
Same fix as for nouveau, when we fail with EINVAL, subsequent
gets fail hard, causing the device not to open.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-04-03 12:35:41 +02:00
Marek Olšák
020ff54676 drm/radeon: set PIPE_CONFIG for 1D and linear tiling modes on CIK
This fixes fast color clear with 1D-tiled single-sample surfaces
and Hyper-Z corruption with 1D-tiled depth surfaces.

Even though it seems it is not needed for 1D tiling, CMASK and HTILE are
always 2D-tiled, thus the hw needs to know the actual pipe configuration
for CMASK and HTILE addressing no matter what the tiling mode of the surface
is.

Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
2014-03-25 13:13:24 +01:00
Marek Olšák
bda72d58a2 drm/radeon: add a way to get and set initial buffer domains v2
When passing buffers between processes, the receiving process needs to know
the original buffer domain, so that it doesn't accidentally move the buffer.

v2: reserve the buffer

Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
2014-03-03 10:53:01 +01:00
Dave Airlie
7c4c62a04a drm/radeon: allow geom rings to be setup on r600/r700 (v2)
the evergreen CS parser has allowed this for a while, just port
the code to the r600 one.

This is required before geom shaders can be made work.

v2: agd5f: minor cleanup and add additional 7xx reg.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-02-06 12:13:52 +10:00
Alex Deucher
9babd35ad7 drm/radeon/runpm: don't runtime suspend non-PX cards
Prevent runtime suspend of non-PX GPUs.  Runtime suspend is
not what we want in those cases.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2014-01-29 15:23:03 -05:00
Ville Syrjälä
abca9e4544 drm: Pass 'flags' from the caller to .get_scanout_position()
Preparation for moving the early vblank IRQ logic into
radeon_get_crtc_scanoutpos().

v2: Fix radeon_drv.c compile warning (Mario)

Reviewed-by: mario.kleiner.de@gmail.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2014-01-20 12:21:35 +02:00
Dave Airlie
cfd72a4c20 Merge branch 'drm-intel-next' of git://people.freedesktop.org/~danvet/drm-intel into drm-next
drm-intel-next-2014-01-10:
- final bits for runtime D3 on Haswell from Paul (now enabled fully)
- parse the backlight modulation freq information in the VBT from Jani
  (but not yet used)
- more watermark improvements from Ville for ilk-ivb and bdw
- bugfixes for fastboot from Jesse
- watermark fix for i830M (but not yet everything)
- vlv vga hotplug w/a (Imre)
- piles of other small improvements, cleanups and fixes all over

Note that the pull request includes a backmerge of the last drm-fixes
pulled into Linus' tree - things where getting a bit too messy. So the
shortlog also contains a bunch of patches from Linus tree. Please yell if
you want me to frob it for you a bit.

* 'drm-intel-next' of git://people.freedesktop.org/~danvet/drm-intel: (609 commits)
  drm/i915/bdw: make sure south port interrupts are enabled properly v2
  drm/i915: Include more information in disabled hotplug interrupt warning
  drm/i915: Only complain about a rogue hotplug IRQ after disabling
  drm/i915: Only WARN about a stuck hotplug irq ONCE
  drm/i915: s/hotplugt_status_gen4/hotplug_status_g4x/
2014-01-20 10:21:54 +10:00
Alex Deucher
363eb0b4b7 drm/radeon: add hard_reset module parameter
Enabling this parameter enables pci config reset,
aka hard reset, which is a bus level chip reset.
In some cases this works more reliably than a soft
reset.  Disabled by default.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-01-08 18:41:48 -05:00
Alex Deucher
9482d0d37b drm/radeon: Bump version for CIK DCE tiling fix
Note when CIK DCE tiling was fixed.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-23 11:31:44 -05:00
Daniel Vetter
e9f0d76f3b drm: Kill DRM_IRQ_ARGS
I've killed them a long time ago in drm/i915, let's get rid of this
remnant of shared drm core days for good.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-12-18 11:33:46 +10:00
Alex Deucher
59aebe2b32 Revert "drm/radeon: Implement radeon_pci_shutdown"
This causes a race condition between drm_dev_unregister()
and pci_driver.shutdown at shutdown or driver unload time.

We need to revisit how to properly support kexec within
the drm.

This reverts commit 846ae41ae9.
2013-12-12 12:22:06 -05:00
Michel Dänzer
32f79a8a82 drm/radeon/cik: Add macrotile mode array query
This is required to properly calculate the tiling parameters
in userspace.

Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-18 09:19:36 -05:00
Dave Airlie
91915260ea Merge tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel into drm-next
Bit a bit -fixes pull request in the merge window than usual dua to two
feauture-y things:
- Display CRCs are now enabled on all platforms, including the odd DP case
  on gm45/vlv. Since this is a testing-only feature it should ever hurt,
  but I figured it'll help with regression-testing -fixes. So I left it
  in and didn't postpone it to 3.14.
- Display power well refactoring from Imre. Would have caused major pain
  conflict with the bdw stage 1 patches if I'd postpone this to -next.
  It's only an relatively small interface rework, so shouldn't cause pain.
  It's also been in my tree since almost 3 weeks already.

That accounts for about two thirds of the pull, otherwise just bugfixes:
- vlv backlight fix from Jesse/Jani
- vlv vblank timestamp fix from Jesse
- improved edp detection through vbt from Ville (fixes a vlv issue)
- eDP vdd fix from Paulo
- fixes for dvo lvds on i830M
- a few smaller things all over

Note: This contains a backmerge of v3.12. Since the -internal branch
always applied on top of -nightly I need that unified base to merge bdw
patches. So you'll get a conflict with radeon connector props when pulling
this (and nouveau/master will also conflict a bit when Ben doesn't
rebase). The backmerge itself only had conflicts in drm/i915.

There's also a tiny conflict between Jani's backlight fix and your sysfs
lifetime fix in drm-next.

* tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel: (940 commits)
  drm/i915/vlv: use per-pipe backlight controls v2
  drm/i915: make backlight functions take a connector
  drm/i915: move opregion asle request handling to a work queue
  drm/i915/vlv: use PIPE_START_VBLANK interrupts on VLV
  drm/i915: Make intel_dp_is_edp() less specific
  drm/i915: Give names to the VBT child device type bits
  drm/i915/vlv: enable HDA display audio for Valleyview2
  drm/i915/dvo: call ->mode_set callback only when the port is running
  drm/i915: avoid unclaimed registers when capturing the error state
  drm/i915: Enable DP port CRC for the "auto" source on g4x/vlv
  drm/i915: scramble reset support for DP port CRC on vlv
  drm/i915: scramble reset support for DP port CRC on g4x
  drm/i916: add "auto" pipe CRC source
  ...

Conflicts:
	MAINTAINERS
	drivers/gpu/drm/i915/intel_panel.c
	drivers/gpu/drm/nouveau/core/subdev/mc/base.c
	drivers/gpu/drm/radeon/atombios_encoders.c
	drivers/gpu/drm/radeon/radeon_connectors.c
2013-11-08 16:34:39 +10:00
Mario Kleiner
d47abc585d drm/radeon: Push get_scanout_position() timestamping into kms driver.
Move the ktime_get() clock readouts and potential preempt_disable()
calls from drm core into kms driver to make it compatible with the
api changes in the drm core.

This should not introduce any change in functionality or behaviour
in radeon-kms, just a reshuffling of code.

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-11-06 11:53:42 +10:00
Daniel Vetter
7f16e5c141 Merge tag 'v3.12' into drm-intel-next
I want to merge in the new Broadwell support as a late hw enabling
pull request. But since the internal branch was based upon our
drm-intel-nightly integration branch I need to resolve all the
oustanding conflicts in drm/i915 with a backmerge to make the 60+
patches apply properly.

We'll propably have some fun because Linus will come up with a
slightly different merge solution.

Conflicts:
	drivers/gpu/drm/i915/i915_dma.c
	drivers/gpu/drm/i915/i915_drv.c
	drivers/gpu/drm/i915/intel_crt.c
	drivers/gpu/drm/i915/intel_ddi.c
	drivers/gpu/drm/i915/intel_display.c
	drivers/gpu/drm/i915/intel_dp.c
	drivers/gpu/drm/i915/intel_drv.h

All rather simple adjacent lines changed or partial backports from
-next to -fixes, with the exception of the thaw code in i915_dma.c.
That one needed a bit of shuffling to restore the intent.

Oh and the massive header file reordering in intel_drv.h is a bit
trouble. But not much.

v2: Also don't forget the fixup for the silent conflict that results
in compile fail ...

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-11-04 16:28:52 +01:00
Markus Trippelsdorf
846ae41ae9 drm/radeon: Implement radeon_pci_shutdown
Currently radeon devices are not properly shutdown during kexec. This
causes a varity of issues, e.g. dpm initialization failures.
Fix this by implementing a radeon_pci_shutdown function, that unloads
the driver cleanly.

Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01 12:43:20 -04:00
Dave Airlie
10ebc0bc09 drm/radeon: add runtime PM support (v2)
This hooks radeon up to the runtime PM system to enable
dynamic power management for secondary GPUs in switchable
and powerxpress laptops.

v2: agd5f: clean up, add module parameter

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01 12:43:14 -04:00
Dave Airlie
7473e830c4 drm/radeon: convert to pmops
This is a pre-requisite for runtime pm on powerxpress systems.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01 12:43:14 -04:00
Alex Deucher
108dc8e8b4 drm/radeon: rework audio option
In 3.12 I changed audio to be enabled by default,
but you still had to turn it on via xrandr.  This
was confusing to users so change it to minic the
previous behavior:

- audio option is set to -1 (auto) by default which is
  the current 3.12 behavior (audio is enabled but requires
  xrandr to turn it on).
- if audio = 1, the audio is enabled without needing
  to mess with xrandr (previous behavior)
- audio = 0 disables audio

It retains the new feature of allowing the user to enable
audio on the fly with xrandr, but turns audio on
automatically if radeon.audio=1 is set which is what
most users expect.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
2013-10-18 16:16:19 -04:00
David Herrmann
16eb5f4379 drm: kill ->gem_init_object() and friends
All drivers embed gem-objects into their own buffer objects. There is no
reason to keep drm_gem_object_alloc(), gem->driver_private and
->gem_init_object() anymore.

New drivers are highly encouraged to do the same. There is no benefit in
allocating gem-objects separately.

Cc: Dave Airlie <airlied@gmail.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Ben Skeggs <skeggsb@gmail.com>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-10-09 14:38:02 +10:00
Alex Deucher
8666c076df drm/radeon: add a connector property for audio
This provides a connector property to enable/disable hdmi
audio on the fly.  The default is disabled, but you can select
auto (let the driver detect an audio capable monitor and enable it)
or enabled (force audio enabled).  This also enables audio by
default so you no longer need a module parameter to enable audio.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-09-11 11:44:25 -04:00
Christian König
f33bcab9e8 drm/radeon: support render nodes
Enable support for drm render nodes for radeon by flagging the ioctls that
are safe and just needed for rendering.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-09-02 10:51:53 +10:00
Dave Airlie
9c725e5bcd Merge branch 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux into drm-next
Alex writes:
This is the radeon drm-next request.  Big changes include:
- support for dpm on CIK parts
- support for ASPM on CIK parts
- support for berlin GPUs
- major ring handling cleanup
- remove the old 3D blit code for bo moves in favor of CP DMA or sDMA
- lots of bug fixes

[airlied: fix up a bunch of conflicts from drm_order removal]

* 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux: (898 commits)
  drm/radeon/dpm: make sure dc performance level limits are valid (CI)
  drm/radeon/dpm: make sure dc performance level limits are valid (BTC-SI) (v2)
  drm/radeon: gcc fixes for extended dpm tables
  drm/radeon: gcc fixes for kb/kv dpm
  drm/radeon: gcc fixes for ci dpm
  drm/radeon: gcc fixes for si dpm
  drm/radeon: gcc fixes for ni dpm
  drm/radeon: gcc fixes for trinity dpm
  drm/radeon: gcc fixes for sumo dpm
  drm/radeonn: gcc fixes for rv7xx/eg/btc dpm
  drm/radeon: gcc fixes for rv6xx dpm
  drm/radeon: gcc fixes for radeon_atombios.c
  drm/radeon: enable UVD interrupts on CIK
  drm/radeon: fix init ordering for r600+
  drm/radeon/dpm: only need to reprogram uvd if uvd pg is enabled
  drm/radeon: check the return value of uvd_v1_0_start in uvd_v1_0_init
  drm/radeon: split out radeon_uvd_resume from uvd_v4_2_resume
  radeon kms: fix uninitialised hotplug work usage in r100_irq_process()
  drm/radeon/audio: set up the sads on DCE3.2 asics
  drm/radeon: fix handling of variable sized arrays for router objects
  ...

Conflicts:
	drivers/gpu/drm/i915/i915_dma.c
	drivers/gpu/drm/i915/i915_gem_dmabuf.c
	drivers/gpu/drm/i915/intel_pm.c
	drivers/gpu/drm/radeon/cik.c
	drivers/gpu/drm/radeon/ni.c
	drivers/gpu/drm/radeon/r600.c
2013-09-02 09:31:40 +10:00
Alex Deucher
edcd26e81f drm/radeon: default to 1024M gart size on rv770+
Newer asics have a lot of vram so it's less of an
issue to waste a little more space for the gart
page table.  This gives us some additional gart space
before having to migrate to non-gart system ram
for games, etc. where we use up most of vram.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30 16:30:00 -04:00
Daniel Vetter
281856477c drm: rip out drm_core_has_MTRR checks
The new arch_phys_wc_add/del functions do the right thing both with
and without MTRR support in the kernel. So we can drop these
additional checks.

David Herrmann suggest to also kill the DRIVER_USE_MTRR flag since
it's now unused, which spurred me to do a bit a better audit of the
affected drivers. David helped a lot in that. Quoting our mail
discussion:

On Wed, Jul 10, 2013 at 5:41 PM, David Herrmann <dh.herrmann@gmail.com> wrote:
> On Wed, Jul 10, 2013 at 5:22 PM, Daniel Vetter <daniel.vetter@ffwll.ch> wrote:
>> On Wed, Jul 10, 2013 at 3:51 PM, David Herrmann <dh.herrmann@gmail.com> wrote:
>>>> -#if __OS_HAS_MTRR
>>>> -static inline int drm_core_has_MTRR(struct drm_device *dev)
>>>> -{
>>>> -       return drm_core_check_feature(dev, DRIVER_USE_MTRR);
>>>> -}
>>>> -#else
>>>> -#define drm_core_has_MTRR(dev) (0)
>>>> -#endif
>>>> -
>>>
>>> That was the last user of DRIVER_USE_MTRR (apart from drivers setting
>>> it in .driver_features). Any reason to keep it around?
>>
>> Yeah, I guess we could rip things out. Which will also force me to
>> properly audit drivers for the eventual behaviour change this could
>> entail (in case there's an x86 driver which did not ask for an mtrr,
>> but iirc there isn't).
>
> david@david-mb ~/dev/kernel/linux $ for i in drivers/gpu/drm/* ; do if
> test -d "$i" ; then if ! grep -q USE_MTRR -r $i ; then echo $i ; fi ;
> fi ; done
> drivers/gpu/drm/exynos
> drivers/gpu/drm/gma500
> drivers/gpu/drm/i2c
> drivers/gpu/drm/nouveau
> drivers/gpu/drm/omapdrm
> drivers/gpu/drm/qxl
> drivers/gpu/drm/rcar-du
> drivers/gpu/drm/shmobile
> drivers/gpu/drm/tilcdc
> drivers/gpu/drm/ttm
> drivers/gpu/drm/udl
> drivers/gpu/drm/vmwgfx
> david@david-mb ~/dev/kernel/linux $
>
> So for x86 gma500,nouveau,qxl,udl,vmwgfx don't set DRIVER_USE_MTRR.
> But I cannot tell whether they break if we call arch_phys_wc_add/del,
> anyway. At least nouveau seemed to work here, but it doesn't use AGP
> or drm_bufs, I guess.

Cool, thanks a lot for stitching together the list of drivers to look
at. So for real KMS drivers it's the drives responsibility to add an
mtrr if it needs one. nouvea, radeon, mgag200, i915 and vmwgfx do that
already. Somehow the savage driver also ends up doing that, I have no
idea why.

Note that gma500 as a pure KMS driver doesn't need MTRR setup since
the platforms that it supports all support PAT. So no MTRRs needed to
get wc iomappings.

The mtrr support in the drm core is all for legacy mappings of garts,
framebuffers and registers. All legacy drivers set the USE_MTRR flag,
so we're good there.

All in all I think we can really just ditch this

/endquote

v2: Also kill DRIVER_USE_MTRR as suggested by David Herrmann

v3: Rebase on top of David Herrmann's agp setup/cleanup changes.

Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-19 14:11:44 +10:00
Daniel Vetter
b0e898ac55 drm: remove FASYNC support
So I've stumbled over drm_fasync and wondered what it does. Digging
that up is quite a story.

First I've had to read up on what this does and ended up being rather
bewildered why peopled loved signals so much back in the days that
they've created SIGIO just for that ...

Then I wondered how this ever works, and what that strange "No-op."
comment right above it should mean. After all calling the core fasync
helper is pretty obviously not a noop. After reading through the
kernels FASYNC implementation I've noticed that signals are only sent
out to the processes attached with FASYNC by calling kill_fasync.

No merged drm driver has ever done that.

After more digging I've found out that the only driver that ever used
this is the so called GAMMA driver. I've frankly never heard of such a
gpu brand ever before. Now FASYNC seems to not have been the only bad
thing with that driver, since Dave Airlie removed it from the drm
driver with prejudice:

commit 1430163b4bbf7b00367ea1066c1c5fe85dbeefed
Author: Dave Airlie <airlied@linux.ie>
Date:   Sun Aug 29 12:04:35 2004 +0000

    Drop GAMMA DRM from a great height ...

Long story short, the drm fasync support seems to be doing absolutely
nothing. And the only user of it was never merged into the upstream
kernel. And we don't need any fops->fasync callback since the fcntl
implementation in the kernel already implements the noop case
correctly.

So stop this particular cargo-cult and rip it all out.

v2: Kill drm_fasync assignments in rcar (newly added) and imx drivers
(somehow I've missed that one in staging). Also drop the reference in
the drm DocBook. ARM compile-fail reported by Rob Clark.

v3: Move the removal of dev->buf_asnyc assignment in drm_setup to this
patch here.

v4: Actually git add ... tsk.

Cc: Dave Airlie <airlied@linux.ie>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Rob Clark <robdclark@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-19 10:05:17 +10:00
Daniel Vetter
d8ed16884a drm/radeon: kill firstopen callback for kms driver
Again, it does nothing.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-19 10:03:15 +10:00
Rob Clark
baa7094355 drm: const'ify ioctls table (v2)
Because, there is no reason for it not to be const.

v1: original
v2: fix compile break in vmwgfx, and couple related cleanups suggested
    by Ville Syrjälä

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-07 10:10:02 +10:00
Daniel Vetter
43387b37fa drm/gem: create drm_gem_dumb_destroy
All the gem based kms drivers really want the same function to
destroy a dumb framebuffer backing storage object.

So give it to them and roll it out in all drivers.

This still leaves the option open for kms drivers which don't use GEM
for backing storage, but it does decently simplify matters for gem
drivers.

Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Cc: Ben Skeggs <skeggsb@gmail.com>
Reviwed-by: Rob Clark <robdclark@gmail.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-07 09:59:24 +10:00
Daniel Vetter
81e9569760 drm/radeon: remove DRIVER_HAS_DMA/SG/PCI_DMA from the kms driver
Really, this is all old-style stuff and just copy-pasta from the
ums driver.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-07-23 19:25:11 +10:00
Daniel Vetter
5379dc0422 drm/radoen: kill radeon_dma_ioctl_kms
No need to create a dummy ioctl function to return -EINVAL, since
that's what the core already does in the absence of the dma_ioctl
callback. So we can safely remove this.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-07-23 19:20:23 +10:00
Alex Deucher
1294d4a36d drm/radeon: add a module parameter to disable aspm
Can cause hangs when enabled in certain motherboards.
Set radeon.aspm=0 to disable aspm.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-07-17 14:52:46 -04:00
Maarten Lankhorst
280cf21186 drm/radeon: implement unpin function, v2
Changes since v1:
- Fixup compiler warning in unpin function.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28 11:55:11 +10:00
Alex Deucher
da321c8a6a drm/radeon/kms: add common dpm infrastructure
This adds the common dpm (dynamic power management)
infrastructure:
- dpm callbacks
- dpm init/fini/suspend/resume
- dpm power state selection

No device specific code is enabled yet.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27 10:49:20 -04:00
Alex Deucher
39aee49028 drm/radeon: add cik tile mode array query
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27 10:49:12 -04:00
Dave Airlie
e9ced8e040 drm/radeon: restore nomodeset operation (v2)
When UMS was deprecated it removed support for nomodeset commandline
we really want this in distro land so we can debug stuff, everyone
should fallback to vesa correctly.

v2: oops -1 isn't used anymore, restore original behaviour
-1 is default, so we can boot with nomodeset on the command line,
then use radeon.modeset=1 to override it for debugging later.

Cc: stable@vger.kernel.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-05-17 11:47:07 +10:00
Jerome Glisse
64d7b8bed8 drm/radeon: add si tile mode array query v3
Allow userspace to query for the tile mode array so userspace can properly
compute surface pitch and alignment requirement depending on tiling.

v2: Make strict aliasing safer by casting to char when copying
v3: merge fix from Christian

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-04-11 09:22:06 -04:00
Christian König
902aaef6c6 drm/radeon: add ring working query
Add new ioctl option and bumb minor version number.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-04-11 09:22:05 -04:00
Samuel Li
a0a53aa8c7 drm/radeon: Use direct mapping for fast fb access on RS690
This patch allows the CPU to map the stolen vram segment
directly rather than going through the PCI BAR.  This
significantly improves performance for certain workloads with
a properly patched ddx.

Use radeon.fastfb=1 to enable it (disabled by default).
Currently only supported on RS690, but support for RS780/880
and newer APUs may be added eventually.

Signed-off-by: Samuel Li <samuel.li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-04-09 10:31:31 -04:00
Marek Olšák
774c389fae drm/radeon: don't check mipmap alignment if MIP_ADDRESS is FMASK
The MIP_ADDRESS state has 2 meanings. If the texture has one sample
per pixel, it's a pointer to the mipmap chain. If the texture has
multiple samples per pixel, it's a pointer to FMASK, a metadata buffer
needed for reading compressed MSAA textures. The mipmap
alignment rules do not apply to FMASK.

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-03-07 12:58:59 -05:00
Aaron Plattner
1e6d17a5df drm/radeon: use prime helpers
Simplify the Radeon prime implementation by using the default behavior provided
by drm_gem_prime_import and drm_gem_prime_export.

v2:
- Rename functions to radeon_gem_prime_get_sg_table and
  radeon_gem_prime_import_sg_table.
- Delete the now-unused vmapping_count variable.

Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-08 13:48:43 +10:00
Christian König
14adc89298 drm/radeon: Deprecate UMS support v2
KMS support is out and stable for a couple of years now and
the userspace code has deprecated or abandoned the old UMS interface.

So make the KMS interface the default and deprecate the UMS interface
in the kernel as well.

v2: rebased on alex/drm-next-3.9-wip

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-01-31 16:24:47 -05:00
Marek Olšák
c18b117049 drm/radeon: allow FP16 color clear registers on r500
Probably not a candidate for stable kernels because of conflicts
in DRM versioning.

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-01-15 09:07:12 -05:00
Greg Kroah-Hartman
56550d94cb Drivers: gpu: remove __dev* attributes.
CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, and __devexit
from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03 15:57:15 -08:00
Jerome Glisse
4613ca14b9 drm/radeon: add support for MEM_WRITE packet
To make it easier to debug some lockup from userspace add support
to MEM_WRITE packet.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-12-19 17:45:06 -05:00
Alex Deucher
8696e33f06 drm/radeon: bump version for CS ioctl support for async DMA
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-12-14 10:45:27 -05:00
Jerome Glisse
4ac0533aba drm/radeon: fix htile buffer size computation for command stream checker
Fix the size computation of the htile buffer.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-12-14 10:45:24 -05:00
Dave Airlie
1a1494def7 Merge branch 'drm-next-3.8' of git://people.freedesktop.org/~agd5f/linux into drm-next
Alex writes:
Pretty minor -next pull request.  We some additional new bits waiting
internally for release.  Hopefully Monday we can get at least some of
them out.  The others will probably take a few more weeks.

Highlights of the current request:
- ELD registers for passing audio information to the sound hardware
- Handle GPUVM page faults more gracefully
- Misc fixes

Merge radeon test
* 'drm-next-3.8' of git://people.freedesktop.org/~agd5f/linux: (483 commits)
  drm/radeon: bump driver version for new info ioctl requests
  drm/radeon: fix eDP clk and lane setup for scaled modes
  drm/radeon: add new INFO ioctl requests
  drm/radeon/dce32+: use fractional fb dividers for high clocks
  drm/radeon: use cached memory when evicting for vram on non agp
  drm/radeon: add a CS flag END_OF_FRAME
  drm/radeon: stop page faults from hanging the system (v2)
  drm/radeon/dce4/5: add registers for ELD handling
  drm/radeon/dce3.2: add registers for ELD handling
  radeon: fix pll/ctrc mapping on dce2 and dce3 hardware
  Linux 3.7-rc7
  powerpc/eeh: Do not invalidate PE properly
  Revert "drm/i915: enable rc6 on ilk again"
  ALSA: hda - Fix build without CONFIG_PM
  of/address: sparc: Declare of_iomap as an extern function for sparc again
  PM / QoS: fix wrong error-checking condition
  bnx2x: remove redundant warning log
  vxlan: fix command usage in its doc
  8139cp: revert "set ring address before enabling receiver"
  MPI: Fix compilation on MIPS with GCC 4.4 and newer
  ...

Conflicts:
	drivers/gpu/drm/exynos/exynos_drm_encoder.c
	drivers/gpu/drm/exynos/exynos_drm_fbdev.c
	drivers/gpu/drm/nouveau/core/engine/disp/nv50.c
2012-12-10 20:03:58 +10:00
Alex Deucher
71bfe916eb drm/radeon: bump driver version for new info ioctl requests
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-12-07 20:00:30 -05:00
Tommi Rantala
302381511f drm/radeon: check alloc_apertures() success in radeon_kick_out_firmware_fb()
Check for alloc_apertures() memory allocation failure, and propagate an
error code in case the allocation failed.

Signed-off-by: Tommi Rantala <tt.rantala@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-20 16:06:27 +10:00
Linus Torvalds
612a9aab56 Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm merge (part 1) from Dave Airlie:
 "So first of all my tree and uapi stuff has a conflict mess, its my
  fault as the nouveau stuff didn't hit -next as were trying to rebase
  regressions out of it before we merged.

  Highlights:
   - SH mobile modesetting driver and associated helpers
   - some DRM core documentation
   - i915 modesetting rework, haswell hdmi, haswell and vlv fixes, write
     combined pte writing, ilk rc6 support,
   - nouveau: major driver rework into a hw core driver, makes features
     like SLI a lot saner to implement,
   - psb: add eDP/DP support for Cedarview
   - radeon: 2 layer page tables, async VM pte updates, better PLL
     selection for > 2 screens, better ACPI interactions

  The rest is general grab bag of fixes.

  So why part 1? well I have the exynos pull req which came in a bit
  late but was waiting for me to do something they shouldn't have and it
  looks fairly safe, and David Howells has some more header cleanups
  he'd like me to pull, that seem like a good idea, but I'd like to get
  this merge out of the way so -next dosen't get blocked."

Tons of conflicts mostly due to silly include line changes, but mostly
mindless.  A few other small semantic conflicts too, noted from Dave's
pre-merged branch.

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (447 commits)
  drm/nv98/crypt: fix fuc build with latest envyas
  drm/nouveau/devinit: fixup various issues with subdev ctor/init ordering
  drm/nv41/vm: fix and enable use of "real" pciegart
  drm/nv44/vm: fix and enable use of "real" pciegart
  drm/nv04/dmaobj: fixup vm target handling in preparation for nv4x pcie
  drm/nouveau: store supported dma mask in vmmgr
  drm/nvc0/ibus: initial implementation of subdev
  drm/nouveau/therm: add support for fan-control modes
  drm/nouveau/hwmon: rename pwm0* to pmw1* to follow hwmon's rules
  drm/nouveau/therm: calculate the pwm divisor on nv50+
  drm/nouveau/fan: rewrite the fan tachometer driver to get more precision, faster
  drm/nouveau/therm: move thermal-related functions to the therm subdev
  drm/nouveau/bios: parse the pwm divisor from the perf table
  drm/nouveau/therm: use the EXTDEV table to detect i2c monitoring devices
  drm/nouveau/therm: rework thermal table parsing
  drm/nouveau/gpio: expose the PWM/TOGGLE parameter found in the gpio vbios table
  drm/nouveau: fix pm initialization order
  drm/nouveau/bios: check that fixed tvdac gpio data is valid before using it
  drm/nouveau: log channel debug/error messages from client object rather than drm client
  drm/nouveau: have drm debugging macros build on top of core macros
  ...
2012-10-03 23:29:23 -07:00
David Howells
760285e7e7 UAPI: (Scripted) Convert #include "..." to #include <path/...> in drivers/gpu/
Convert #include "..." to #include <path/...> in drivers/gpu/.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
2012-10-02 18:01:07 +01:00
David Howells
4126d5d61f UAPI: (Scripted) Remove redundant DRM UAPI header #inclusions from drivers/gpu/.
Remove redundant DRM UAPI header #inclusions from drivers/gpu/.

Remove redundant #inclusions of core DRM UAPI headers (drm.h, drm_mode.h and
drm_sarea.h).  They are now #included via drmP.h and drm_crtc.h via a preceding
patch.

Without this patch and the patch to make include the UAPI headers from the core
headers, after the UAPI split, the DRM C sources cannot find these UAPI headers
because the DRM code relies on specific -I flags to make #include "..."  work
on headers in include/drm/ - but that does not work after the UAPI split without
adding more -I flags.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
2012-10-02 18:01:05 +01:00
Marek Olšák
61051afd35 drm/radeon: allow MIP_ADDRESS=0 for MSAA textures on Evergreen
MIP_ADDRESS should point to the resolved FMASK for an MSAA texture.
Setting MIP_ADDRESS to 0 means the FMASK pointer is invalid (the GPU
won't read the memory then).

The userspace has to set MIP_ADDRESS to 0 and *not* emit any relocation
for it.

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2012-09-27 10:22:45 -04:00
Marek Olšák
46fc8781bf drm/radeon/kms: allow STRMOUT_BASE_UPDATE on RS780 and RS880
This is required to make streamout work there.

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2012-09-27 10:22:44 -04:00
Marek Olšák
523885dec1 drm/radeon: add proper checking of RESOLVE_BOX command for r600-r700
Checking of the second colorbuffer was skipped on r700, because
CB_TARGET_MASK was 0xf. With r600, CB_TARGET_MASK is changed to 0xff,
so we must set the number of samples of the second colorbuffer to 1 in order
to pass the CS checker.
The DRM version is bumped, because RESOLVE_BOX is always rejected without this
fix on r600.

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-29 12:11:00 -04:00
Marek Olšák
c116cc9496 drm/radeon: allow CMASK and FMASK in the CS checker on r600-r700
MSAA is impossible without them.

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
2012-08-20 11:09:49 -04:00
Marek Olšák
6759a0a7a0 drm/radeon/kms: implement timestamp userspace query (v2)
Returns a snapshot of the GPU clock counter.  Needed
for certain OpenGL extensions.

v2: agd5f
- address Jerome's comments
- add function documentation

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13 10:50:56 -04:00
Marek Olšák
b51ad12a36 drm/radeon/kms: add MSAA texture support for r600-evergreen
Most of the checking seems to be in place already. As you can see,
log2(number of samples) resides in LAST_LEVEL.

This is required for MSAA support (namely for depth-stencil resolve and
blitting between MSAA resources).

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13 10:50:56 -04:00
Marek Olšák
0f457e488c drm/radeon/kms: allow "invalid" DB formats as a means to disable DB
Signed-off-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-09 09:53:13 +10:00
Daniel Vetter
b0071efe82 drm: kill reclaim_buffers callback
All leftover users either haven't set DRIVER_HAVE_DMA, in which
case this will never be called, or use the drm_core implementation.

Call that directly in the only callsite.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-07-19 22:50:28 -04:00
Dave Airlie
197bbb3d46 drm/radeon/kms: auto detect pcie link speed from root port
This check the root ports supported link speeds and enables
GEN2 mode if the 5.0 GT link speed is available.

The first 3.0 cards are SI so they will probably need more investigation.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-07-19 22:30:32 -04:00
Alex Deucher
7c77bf2a1a drm/radeon: add support for STRMOUT_BASE_UPDATE on 7xx
Required for streamout.  Bump drm minor.

Marek v2: fix pkt->count check

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-16 14:30:56 +01:00
Jerome Glisse
d26098759c drm/radeon: fix tiling and command stream checking on evergreen v3
Fix regresson since the introduction of command stream checking on
evergreen (thread referenced below). Issue is cause by ddx allocating
bo with formula width*height*bpp while programming the GPU command
stream with ALIGN(height, 8). In some case (where page alignment does
not hide the extra size bo should be according to height alignment)
the kernel will reject the command stream.

This patch reprogram the command stream to slice - 1 (slice is
a derivative value from height) which avoid rejecting the command
stream while keeping the value of command stream checking from a
security point of view.

This patch also fix wrong computation of layer size for 2D tiled
surface. Which should fix issue when 2D color tiling is enabled.
This dump the radeon KMS_DRIVER_MINOR so userspace can know if
they are on a fixed kernel or not.

https://lkml.org/lkml/2012/6/3/80
https://bugs.freedesktop.org/show_bug.cgi?id=50892
https://bugs.freedesktop.org/show_bug.cgi?id=50857

!!! STABLE need a custom version of this patch for 3.4 !!!

v2: actually bump the minor version and add comment about stable
v3: do compute the height the ddx was trying to use

[airlied: drop left over debug]

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-10 17:41:46 +01:00
Alex Deucher
40f5cf9969 drm/radeon: add PRIME support (v2)
This adds prime->fd and fd->prime support to radeon.
It passes the sg object to ttm and then populates
the gart entries using it.

Compile tested only.

v2: stub kmap + use new helpers + add reimporting

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-23 10:47:11 +01:00
Christian König
3368ff0cf4 drm/radeon: make lockup timeout a module param
Don't hard code the 10 seconds timeout. Compute jobs
can run much longer.

Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-03 09:16:35 +01:00
Tom Stellard
609c1e15a4 drm/radeon/kms: add info query for max pipes
The maximum number of pipes is needed by the user space compute
driver to calculate the number of wavefronts per thread group.

Signed-off-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-21 06:55:49 +00:00
Jerome Glisse
285484e2d5 drm/radeon: add support for evergreen/ni tiling informations v11
evergreen and northern island gpu needs more informations for 2D tiling
than previous r6xx/r7xx. Add field to tiling ioctl to allow userspace
to provide those.

The v8 cs checking change to track color view on r6xx/r7xx doesn't
affect old userspace as old userspace always emited 0 for this register.

v2 fix r6xx/r7xx 2D tiling computation
v3 fix r6xx/r7xx height align for untiled surface & add support for
   tile split on evergreen and newer
v4 improve tiling debugging output
v5 fix tile split code for evergreen and newer
v6 set proper tile split for crtc register
v7 fix tile split limit value
v8 add COLOR_VIEW checking to r6xx/r7xx checker, add evergreen cs
   checking, update safe reg for r600, evergreen and cayman.
   Evergreen checking need some work around for stencil alignment
   issues
v9 fix tile split value range, fix compressed texture handling and
   mipmap calculation, allow evergreen check to be silencious in
   front of current broken userspace (depth/stencil alignment issue)
v10 fix eg 3d texture and compressed texture, fix r600 depth array,
    fix r600 color view computation, add support for evergreen stencil
    split
v11 more verbose debugging in some case

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-13 12:28:13 +00:00
Marek Olšák
dd220a00e8 drm/radeon/kms: add support for streamout v7
v2: agd5f: add strmout CS checking, copy_dw register checking

v3: agd5f: don't use cs_check_reg() for copy_dw checking as it
will incorrectly patch the command stream for certain regs.

v4: agd5f: add warning if safe reg check fails for copy_dw

v5: agd5f: add stricter checking for 6xx/7xx

v6: agd5f: add range checking for copy_dw on eg+,
add sx_surface_sync to safe reg list for 7xx.

v7: agd5f: add stricter checking for eg+

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-13 12:09:11 +00:00
Jean Delvare
27d4d05220 drm/radeon/kms: Fix module parameter description format
Module parameter descriptions don't take a trailing \n, otherwise it
breaks formatting of modinfo's output. Also add missing space after
comma.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: David Airlie <airlied@linux.ie>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-13 09:00:51 +00:00
Jerome Glisse
721604a15b drm/radeon: GPU virtual memory support v22
Virtual address space are per drm client (opener of /dev/drm).
Client are in charge of virtual address space, they need to
map bo into it by calling DRM_RADEON_GEM_VA ioctl.

First 16M of virtual address space is reserved by the kernel.

Once using 2 level page table we should be able to have a small
vram memory footprint for each pt (there would be one pt for all
gart, one for all vram and then one first level for each virtual
address space).

Plan include using the sub allocator for a common vm page table
area and using memcpy to copy vm page table in & out. Or use
a gart object and copy things in & out using dma.

v2: agd5f fixes:
- Add vram base offset for vram pages.  The GPU physical address of a
vram page is FB_OFFSET + page offset.  FB_OFFSET is 0 on discrete
cards and the physical bus address of the stolen memory on
integrated chips.
- VM_CONTEXT1_PROTECTION_FAULT_DEFAULT_ADDR covers all vmid's >= 1

v3: agd5f:
- integrate with the semaphore/multi-ring stuff

v4:
- rebase on top ttm dma & multi-ring stuff
- userspace is now in charge of the address space
- no more specific cs vm ioctl, instead cs ioctl has a new
  chunk

v5:
- properly handle mem == NULL case from move_notify callback
- fix the vm cleanup path

v6:
- fix update of page table to only happen on valid mem placement

v7:
- add tlb flush for each vm context
- add flags to define mapping property (readable, writeable, snooped)
- make ring id implicit from ib->fence->ring, up to each asic callback
  to then do ring specific scheduling if vm ib scheduling function

v8:
- add query for ib limit and kernel reserved virtual space
- rename vm->size to max_pfn (maximum number of page)
- update gem_va ioctl to also allow unmap operation
- bump kernel version to allow userspace to query for vm support

v9:
- rebuild page table only when bind and incrementaly depending
  on bo referenced by cs and that have been moved
- allow virtual address space to grow
- use sa allocator for vram page table
- return invalid when querying vm limit on non cayman GPU
- dump vm fault register on lockup

v10: agd5f:
- Move the vm schedule_ib callback to a standalone function, remove
  the callback and use the existing ib_execute callback for VM IBs.

v11:
- rebase on top of lastest Linus

v12: agd5f:
- remove spurious backslash
- set IB vm_id to 0 in radeon_ib_get()

v13: agd5f:
- fix handling of RADEON_CHUNK_ID_FLAGS

v14:
- fix va destruction
- fix suspend resume
- forbid bo to have several different va in same vm

v15:
- rebase

v16:
- cleanup left over of vm init/fini

v17: agd5f:
- cs checker

v18: agd5f:
- reworks the CS ioctl to better support multiple rings and
VM.  Rather than adding a new chunk id for VM, just re-use the
IB chunk id and add a new flags for VM mode.  Also define additional
dwords for the flags chunk id to define the what ring we want to use
(gfx, compute, uvd, etc.) and the priority.

v19:
- fix cs fini in weird case of no ib
- semi working flush fix for ni
- rebase on top of sa allocator changes

v20: agd5f:
- further CS ioctl cleanups from Christian's comments

v21: agd5f:
- integrate CS checker improvements

v22: agd5f:
- final cleanups for release, only allow VM CS on cayman

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-06 09:15:42 +00:00
Dave Airlie
1fbe6f625f Merge tag 'v3.2-rc6' of /home/airlied/devel/kernel/linux-2.6 into drm-core-next
Merge in the upstream tree to bring in the mainline fixes.

Conflicts:
	drivers/gpu/drm/exynos/exynos_drm_fbdev.c
	drivers/gpu/drm/nouveau/nouveau_sgdma.c
2011-12-20 14:43:53 +00:00
Marek Olšák
e70f224c19 drm/radeon/kms: add a CS ioctl flag not to rewrite tiling flags in the CS
This adds a new optional chunk to the CS ioctl that specifies optional flags
to the CS parser. Why this is useful is explained below. Note that some regs
no longer need the NOP relocation packet if this feature is enabled.
Tested on r300g and r600g with this flag disabled and enabled.

Assume there are two contexts sharing the same mipmapped tiled texture.
One context wants to render into the first mipmap and the other one
wants to render into the last mipmap. As you probably know, the hardware
has a MACRO_SWITCH feature, which turns off macro tiling for small mipmaps,
but that only applies to samplers.
(at least on r300-r500, though later hardware likely behaves the same)

So we want to just re-set the tiling flags before rendering (writing
packets), right? ... No. The contexts run in parallel, so they may
set the tiling flags simultaneously and then fire their command streams
also simultaneously. The last one setting the flags wins, the other one
loses.

Another problem is when one context wants to render into the first and
the last mipmap in one CS. Impossible. It must flush before changing
tiling flags and do the rendering into the smaller mipmaps in another CS.

Yet another problem is that writing copy_blit in userspace would be a mess
involving re-setting tiling flags to please the kernel, and causing races
with other contexts at the same time.

The only way out of this is to send tiling flags with each CS, ideally
with each relocation. But we already do that through the registers.
So let's just use what we have in the registers.

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-20 07:53:13 +00:00
Arjan van de Ven
e08e96de98 drm: Make the per-driver file_operations struct const
From fdf1fdebaa00f81de18c227f32f8074c8b352d50 Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Sun, 30 Oct 2011 19:06:07 -0700
Subject: [PATCH] drm: Make the per-driver file_operations struct const

The DRM layer keeps a copy of struct file_operations inside its
big driver struct... which prevents it from being consistent and static.
For consistency (and the general security objective of having such things
static), it's desirable to get this fixed.

This patch splits out the file_operations field to its own struct,
which is then "static const", and just stick a pointer to this into
the driver struct, making it more consistent with how the rest of the
kernel does this.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-11 11:14:47 +00:00
Linus Torvalds
83dbb15e9c Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (40 commits)
  vmwgfx: Snoop DMA transfers with non-covering sizes
  vmwgfx: Move the prefered mode first in the list
  vmwgfx: Unreference surface on cursor error path
  vmwgfx: Free prefered mode on error path
  vmwgfx: Use pointer return error codes
  vmwgfx: Fix hw cursor position
  vmwgfx: Infrastructure for explicit placement
  vmwgfx: Make the preferred autofit mode have a 60Hz vrefresh
  vmwgfx: Remove screen object active list
  vmwgfx: Screen object cleanups
  drm/radeon/kms: consolidate GART code, fix segfault after GPU lockup V2
  drm/radeon/kms: don't poll forever if MC GDDR link training fails
  drm/radeon/kms: fix DP setup on TRAVIS bridges
  drm/radeon/kms: set HPD polarity in hpd_init()
  drm/radeon/kms: add MSI module parameter
  drm/radeon/kms: Add MSI quirk for Dell RS690
  drm/radeon/kms: Add MSI quirk for HP RS690
  drm/radeon/kms: split MSI check into a separate function
  vmwgfx: Reinstate the update_layout ioctl
  drm/radeon/kms: always do extended edid probe
  ...
2011-11-07 10:01:56 -08:00
Alex Deucher
a18cee15ed drm/radeon/kms: add MSI module parameter
Allow the user to override whether MSIs are enabled
or not on supported ASICs.  MSIs are disabled by default
on IGP chips as they tend not to work.  However certain
IGP chips only seem to work with MSIs enabled.

I suspect this is a chipset or bios issue, but I'm not sure
what the proper fix is.  This will at least make diagnosing
and working around the problem much easier.

See:
https://bugs.freedesktop.org/show_bug.cgi?id=37679

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-03 17:53:14 +00:00
Paul Gortmaker
e0cd360813 gpu: add module.h to drivers/gpu files as required.
So that we don't get build failures once the implicit module.h
presence is removed.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:32:03 -04:00
Alex Deucher
b8709894f2 drm/radeon/kms: fix version comment due to merge timing
Compute cs support was actually added in 2.11.0 rather than
2.10.0, but the patch was written prior.  Update comment
to match.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-04 14:22:08 +01:00
Alex Deucher
e55b9422e1 drm/radeon/kms: add info query for backend map
The 3D driver need to get the pipe to backend
map to certain things.  Add a query to get the
info.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-18 08:13:08 +01:00
Alex Deucher
033b565001 drm/radeon/kms: add initial CS checker support for compute
- Add some new compute regs
- Add new dispatch packets for evergreen/cayman

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-21 12:36:39 +10:00