BCM63XX (MIPS) does not use device tree, so there cannot be any
of_device_id, causing the driver to fail on probe:
[ 0.904564] bcm2835-rng: probe of bcm63xx-rng failed with error -22
Fix this by checking for match data only if we are probing from device
tree.
Fixes: 8705f24f7b ("hwrng: bcm2835 - Enable BCM2835 RNG to work on BCM63xx platforms")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace hard coded AES block size with define.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is no need to have the struct stm32_hash_dev *hdev static
since new value always be assigned before use it.
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixed Traffic Stall caused by
- Subcommands except last should have more bit set
- For esn case subcommand is required for linear skb only
- Also Optimized is_eth_imm usage
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/crypto/marvell/cipher.c: In function 'mv_cesa_skcipher_dma_req_init':
drivers/crypto/marvell/cipher.c:325:15: warning:
variable 'ivsize' set but not used [-Wunused-but-set-variable]
It's not used any more after 0c99620f0a ("crypto: marvell - Use an unique
pool to copy results of requests")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The current content of some of the driver messages and the way that they
are issued results in some confusion, especially in the area of the PSP
as it relates to SEV support. If SEV is not supported, a message is issued
that says "psp initialization failed." This makes it seem like there was
a problem, when in fact, the PSP support is just disabled if SEV is not
supported.
Update the driver to check SEV support a bit earlier and issue a debug-
level message if SEV is not supported, followed by a debug-level message
that the PSP is disabled. This way you will only see PSP messages if SEV
is supported or if debug information is desired. Also, remove the overall
"enabled" and "disabled" messages for the driver and rely on the CCP and
PSP support to issue component-specific messages.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add 1536 and 4096-byte Adiantum test vectors so that the case where
there are multiple NH hashes is tested. This is already tested by the
nhpoly1305 test vectors, but it should be tested at the Adiantum level
too. Moreover the 4096-byte case is especially important.
As with the other Adiantum test vectors, these were generated by the
reference Python implementation at https://github.com/google/adiantum
and then automatically formatted for testmgr by a script.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This is needed to test that the end of the message is zero-padded when
the length is not a multiple of 16 (NH_MESSAGE_UNIT). It's already
tested indirectly by the 31-byte Adiantum test vector, but it should be
tested directly at the nhpoly1305 level too.
As with the other nhpoly1305 test vectors, this was generated by the
reference Python implementation at https://github.com/google/adiantum
and then automatically formatted for testmgr by a script.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Make the arm ctr-aes-ce algorithm update the IV buffer to contain the
next counter after processing a partial final block, rather than leave
it as the last counter. This makes ctr-aes-ce pass the updated AES-CTR
tests. This change also makes the code match the arm64 version in
arch/arm64/crypto/aes-modes.S more closely.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Make the arm64 ctr-aes-neon and ctr-aes-ce algorithms update the IV
buffer to contain the next counter after processing a partial final
block, rather than leave it as the last counter. This makes these
algorithms pass the updated AES-CTR tests.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Test that all CTR implementations update the IV buffer to contain the
next counter block, aka the IV to continue the encryption/decryption of
a larger message. When the length processed is a multiple of the block
size, users may rely on this for chaining.
When the length processed is *not* a multiple of the block size, simple
chaining doesn't work. However, as noted in commit 88a3f582be
("crypto: arm64/aes - don't use IV buffer to return final keystream
block"), the generic CCM implementation assumes that the CTR IV is
handled in some sane way, not e.g. overwritten with part of the
keystream. Since this was gotten wrong once already, it's desirable to
test for it. And, the most straightforward way to do this is to enforce
that all CTR implementations have the same behavior as the generic
implementation, which returns the *next* counter following the final
partial block. This behavior also has the advantage that if someone
does misuse this case for chaining, then the keystream won't be
repeated. Thus, this patch makes the tests expect this behavior.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Test that all CBC implementations update the IV buffer to contain the
last ciphertext block, aka the IV to continue the encryption/decryption
of a larger message. Users may rely on this for chaining.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Allow skcipher test vectors to declare the value the IV buffer should be
updated to at the end of the encryption or decryption operation.
(This check actually used to be supported in testmgr, but it was never
used and therefore got removed except for the AES-Keywrap special case.
But it will be used by CBC and CTR now, so re-add it.)
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
3DES only has an 8-byte block size, but the 3DES-CTR test vectors use
16-byte IVs. Remove the unused 8 bytes from the ends of the IVs.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For chain mode in cipher(eg. AES-CBC/DES-CBC), the iv is continuously
updated in the operation. The new iv value should be written to device
register by software.
Reported-by: Eric Biggers <ebiggers@google.com>
Fixes: 433cd2c617 ("crypto: rockchip - add crypto driver for rk3288")
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Zhang Zhijie <zhangzj@rock-chips.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In some cases, the nents of src scatterlist is different from
dst scatterlist. So two variables are used to handle the nents
of src&dst scatterlist.
Reported-by: Eric Biggers <ebiggers@google.com>
Fixes: 433cd2c617 ("crypto: rockchip - add crypto driver for rk3288")
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Zhang Zhijie <zhangzj@rock-chips.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add missing break statement in order to prevent the code from falling
through to case S_DIN_to_DES.
This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.
Fixes: 63ee04c8b4 ("crypto: ccree - add skcipher support")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add cpu_relax() in the loop that tries to enqueue the FDs.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Avoid console being flooded with prints in case HW is too busy to accept
new enqueue requests.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Driver was relying on an older DPIO API, which provided a CPU-affine DPIO
in case it was called with preemption disabled.
Since this is no longer the case, save the CPU-affine DPIO in per-cpu
private structure during setup and further use it on the hot path.
Note that preemption is no longer disabled while trying to enqueue an
FD. Thus it might be possible to run the enqueue on a different CPU
(due to migration, when in process context), however this wouldn't be a
functionality issue.
Since we allow for all cores to enqueue, we take care of data
structures setup to handle the case when number of (Rx, Tx) queue pairs
is smaller than number of cores.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Last user of cdev_list_lock was removed in commit
6422ccc5fb ("crypto/chelsio/chtls: listen fails with multiadapt")
Cc: Atul Gupta <atul.gupta@chelsio.com>
Cc: Harsh Jain <harsh@chelsio.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Modify setkey callback for cbc des and 3des to check for weak keys.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add ecb mode support for aes, des, 3des and arc4 ciphers.
ecb(*) reuses existing skcipher implementation, updating it with support
for no IV.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some arc4 cipher algorithm defines show up in two places:
crypto/arc4.c and drivers/crypto/bcm/cipher.h.
Let's export them in a common header and update their users.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The mapped_{src,dst}_nents _returned_ from the dma_map_sg call (which
could be less than src/dst_nents) have to be used to generate the aead,
skcipher job descriptors.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch removes an unused label.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: f0fcf9ade4 ("crypto: qat - no need to check return...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The best-laid plans of mice and men often go awry.
Remove Yael C. as co-maintainer as she moved on to other endeavours.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Check that algorithms do not change the aead_request structure, as users
may rely on submitting the request again (e.g. after copying new data
into the same source buffer) without reinitializing everything.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Check that algorithms do not change the skcipher_request structure, as
users may rely on submitting the request again (e.g. after copying new
data into the same source buffer) without reinitializing everything.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert alg_test_hash() to use the new test framework, adding a list of
testvec_configs to test by default. When the extra self-tests are
enabled, randomly generated testvec_configs are tested as well.
This improves hash test coverage mainly because now all algorithms have
a variety of data layouts tested, whereas before each algorithm was
responsible for declaring its own chunked test cases which were often
missing or provided poor test coverage. The new code also tests both
the MAY_SLEEP and !MAY_SLEEP cases and buffers that cross pages.
This already found bugs in the hash walk code and in the arm32 and arm64
implementations of crct10dif.
I removed the hash chunked test vectors that were the same as
non-chunked ones, but left the ones that were unique.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert alg_test_aead() to use the new test framework, using the same
list of testvec_configs that skcipher testing uses.
This significantly improves AEAD test coverage mainly because previously
there was only very limited test coverage of the possible data layouts.
Now the data layouts to test are listed in one place for all algorithms
and optionally are also randomly generated. In fact, only one AEAD
algorithm (AES-GCM) even had a chunked test case before.
This already found bugs in all the AEGIS and MORUS implementations, the
x86 AES-GCM implementation, and the arm64 AES-CCM implementation.
I removed the AEAD chunked test vectors that were the same as
non-chunked ones, but left the ones that were unique.
Note: the rewritten test code allocates an aead_request just once per
algorithm rather than once per encryption/decryption, but some AEAD
algorithms incorrectly change the tfm pointer in the request. It's
nontrivial to fix these, so to move forward I'm temporarily working
around it by resetting the tfm pointer. But they'll need to be fixed.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert alg_test_skcipher() to use the new test framework, adding a list
of testvec_configs to test by default. When the extra self-tests are
enabled, randomly generated testvec_configs are tested as well.
This improves skcipher test coverage mainly because now all algorithms
have a variety of data layouts tested, whereas before each algorithm was
responsible for declaring its own chunked test cases which were often
missing or provided poor test coverage. The new code also tests both
the MAY_SLEEP and !MAY_SLEEP cases, different IV alignments, and buffers
that cross pages.
This has already found a bug in the arm64 ctr-aes-neonbs algorithm.
It would have easily found many past bugs.
I removed the skcipher chunked test vectors that were the same as
non-chunked ones, but left the ones that were unique.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add functions that generate a random testvec_config, in preparation for
using it for randomized fuzz tests.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
To achieve more comprehensive crypto test coverage, I'd like to add fuzz
tests that use random data layouts and request flags.
To be most effective these tests should be part of testmgr, so they
automatically run on every algorithm registered with the crypto API.
However, they will take much longer to run than the current tests and
therefore will only really be intended to be run by developers, whereas
the current tests have a wider audience.
Therefore, add a new kconfig option CONFIG_CRYPTO_MANAGER_EXTRA_TESTS
that can be set by developers to enable these extra, expensive tests.
Similar to the regular tests, also add a module parameter
cryptomgr.noextratests to support disabling the tests.
Finally, another module parameter cryptomgr.fuzz_iterations is added to
control how many iterations the fuzz tests do. Note: for now setting
this to 0 will be equivalent to cryptomgr.noextratests=1. But I opted
for separate parameters to provide more flexibility to add other types
of tests under the "extra tests" category in the future.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Crypto algorithms must produce the same output for the same input
regardless of data layout, i.e. how the src and dst scatterlists are
divided into chunks and how each chunk is aligned. Request flags such
as CRYPTO_TFM_REQ_MAY_SLEEP must not affect the result either.
However, testing of this currently has many gaps. For example,
individual algorithms are responsible for providing their own chunked
test vectors. But many don't bother to do this or test only one or two
cases, providing poor test coverage. Also, other things such as
misaligned IVs and CRYPTO_TFM_REQ_MAY_SLEEP are never tested at all.
Test code is also duplicated between the chunked and non-chunked cases,
making it difficult to make other improvements.
To improve the situation, this patch series basically moves the chunk
descriptions into the testmgr itself so that they are shared by all
algorithms. However, it's done in an extensible way via a new struct
'testvec_config', which describes not just the scaled chunk lengths but
also all other aspects of the crypto operation besides the data itself
such as the buffer alignments, the request flags, whether the operation
is in-place or not, the IV alignment, and for hash algorithms when to
do each update() and when to use finup() vs. final() vs. digest().
Then, this patch series makes skcipher, aead, and hash algorithms be
tested against a list of default testvec_configs, replacing the current
test code. This improves overall test coverage, without reducing test
performance too much. Note that the test vectors themselves are not
changed, except for removing the chunk lists.
This series also adds randomized fuzz tests, enabled by a new kconfig
option intended for developer use only, where skcipher, aead, and hash
algorithms are tested against many randomly generated testvec_configs.
This provides much more comprehensive test coverage.
These improved tests have already exposed many bugs.
To start it off, this initial patch adds the testvec_config and various
helper functions that will be used by the skcipher, aead, and hash test
code that will be converted to use the new testvec_config framework.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The arm64 NEON bit-sliced implementation of AES-CTR fails the improved
skcipher tests because it sometimes produces the wrong ciphertext. The
bug is that the final keystream block isn't returned from the assembly
code when the number of non-final blocks is zero. This can happen if
the input data ends a few bytes after a page boundary. In this case the
last bytes get "encrypted" by XOR'ing them with uninitialized memory.
Fix the assembly code to return the final keystream block when needed.
Fixes: 88a3f582be ("crypto: arm64/aes - don't use IV buffer to return final keystream block")
Cc: <stable@vger.kernel.org> # v4.11+
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Hash algorithms with an alignmask set, e.g. "xcbc(aes-aesni)" and
"michael_mic", fail the improved hash tests because they sometimes
produce the wrong digest. The bug is that in the case where a
scatterlist element crosses pages, not all the data is actually hashed
because the scatterlist walk terminates too early. This happens because
the 'nbytes' variable in crypto_hash_walk_done() is assigned the number
of bytes remaining in the page, then later interpreted as the number of
bytes remaining in the scatterlist element. Fix it.
Fixes: 900a081f69 ("crypto: ahash - Fix early termination in hash walk")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
gcmaes_crypt_by_sg() dereferences the NULL pointer returned by
scatterwalk_ffwd() when encrypting an empty plaintext and the source
scatterlist ends immediately after the associated data.
Fix it by only fast-forwarding to the src/dst data scatterlists if the
data length is nonzero.
This bug is reproduced by the "rfc4543(gcm(aes))" test vectors when run
with the new AEAD test manager.
Fixes: e845520707 ("crypto: aesni - Update aesni-intel_glue to use scatter/gather")
Cc: <stable@vger.kernel.org> # v4.17+
Cc: Dave Watson <davejwatson@fb.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The x86 MORUS implementations all fail the improved AEAD tests because
they produce the wrong result with some data layouts. The issue is that
they assume that if the skcipher_walk API gives 'nbytes' not aligned to
the walksize (a.k.a. walk.stride), then it is the end of the data. In
fact, this can happen before the end.
Also, when the CRYPTO_TFM_REQ_MAY_SLEEP flag is given, they can
incorrectly sleep in the skcipher_walk_*() functions while preemption
has been disabled by kernel_fpu_begin().
Fix these bugs.
Fixes: 56e8e57fc3 ("crypto: morus - Add common SIMD glue code for MORUS")
Cc: <stable@vger.kernel.org> # v4.18+
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The x86 AEGIS implementations all fail the improved AEAD tests because
they produce the wrong result with some data layouts. The issue is that
they assume that if the skcipher_walk API gives 'nbytes' not aligned to
the walksize (a.k.a. walk.stride), then it is the end of the data. In
fact, this can happen before the end.
Also, when the CRYPTO_TFM_REQ_MAY_SLEEP flag is given, they can
incorrectly sleep in the skcipher_walk_*() functions while preemption
has been disabled by kernel_fpu_begin().
Fix these bugs.
Fixes: 1d373d4e8e ("crypto: x86 - Add optimized AEGIS implementations")
Cc: <stable@vger.kernel.org> # v4.18+
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The generic MORUS implementations all fail the improved AEAD tests
because they produce the wrong result with some data layouts. The issue
is that they assume that if the skcipher_walk API gives 'nbytes' not
aligned to the walksize (a.k.a. walk.stride), then it is the end of the
data. In fact, this can happen before the end. Fix them.
Fixes: 396be41f16 ("crypto: morus - Add generic MORUS AEAD implementations")
Cc: <stable@vger.kernel.org> # v4.18+
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The generic AEGIS implementations all fail the improved AEAD tests
because they produce the wrong result with some data layouts. The issue
is that they assume that if the skcipher_walk API gives 'nbytes' not
aligned to the walksize (a.k.a. walk.stride), then it is the end of the
data. In fact, this can happen before the end. Fix them.
Fixes: f606a88e58 ("crypto: aegis - Add generic AEGIS AEAD implementations")
Cc: <stable@vger.kernel.org> # v4.18+
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
when the source sg contains more than 1 fragment and
destination sg contains 1 fragment, the caam driver
mishandle the buffers to be sent to caam.
Fixes: f2147b88b2 ("crypto: caam - Convert GCM to new AEAD interface")
Cc: <stable@vger.kernel.org> # 4.2+
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Arun Pathak <arun.pathak@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The x86, arm, and arm64 asm implementations of crct10dif are very
difficult to understand partly because many of the comments, labels, and
macros are named incorrectly: the lengths mentioned are usually off by a
factor of two from the actual code. Many other things are unnecessarily
convoluted as well, e.g. there are many more fold constants than
actually needed and some aren't fully reduced.
This series therefore cleans up all these implementations to be much
more maintainable. I also made some small optimizations where I saw
opportunities, resulting in slightly better performance.
This patch cleans up the arm64 version.
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The x86, arm, and arm64 asm implementations of crct10dif are very
difficult to understand partly because many of the comments, labels, and
macros are named incorrectly: the lengths mentioned are usually off by a
factor of two from the actual code. Many other things are unnecessarily
convoluted as well, e.g. there are many more fold constants than
actually needed and some aren't fully reduced.
This series therefore cleans up all these implementations to be much
more maintainable. I also made some small optimizations where I saw
opportunities, resulting in slightly better performance.
This patch cleans up the arm version.
(Also moved the constants to .rodata as suggested by Ard Biesheuvel.)
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The x86, arm, and arm64 asm implementations of crct10dif are very
difficult to understand partly because many of the comments, labels, and
macros are named incorrectly: the lengths mentioned are usually off by a
factor of two from the actual code. Many other things are unnecessarily
convoluted as well, e.g. there are many more fold constants than
actually needed and some aren't fully reduced.
This series therefore cleans up all these implementations to be much
more maintainable. I also made some small optimizations where I saw
opportunities, resulting in slightly better performance.
This patch cleans up the x86 version.
As part of this, I removed support for len < 16 from the x86 assembly;
now the glue code falls back to the generic table-based implementation
in this case. Due to the overhead of kernel_fpu_begin(), this actually
significantly improves performance on these lengths. (And even if
kernel_fpu_begin() were free, the generic code is still faster for about
len < 11.) This removal also eliminates error-prone special cases and
makes the x86, arm32, and arm64 ports of the code match more closely.
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A kexec reboot may leave the firmware in INIT or WORKING state.
Currently, we issue PLATFORM_INIT command during the probe without
checking the current state. The PLATFORM_INIT command fails if the
FW is already in INIT state. Lets check the current state, if FW
is not in UNINIT state then transition it to UNINIT before
initializing or upgrading the FW.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gary Hook <gary.hook@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The arm64 CRC-T10DIF implementation either uses 8-bit or 64-bit
polynomial multiplication instructions, since the latter are
faster but not mandatory in the architecture.
Since that prevents us from testing both implementations on the
same system, let's expose both implementations to the crypto API,
with the priorities reflecting that the P64 version is the
preferred one if available.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
