commit eed3013faa upstream.
Grab a reference to KVM prior to installing VM and vCPU stats file
descriptors to ensure the underlying VM and vCPU objects are not freed
until the last reference to any and all stats fds are dropped.
Note, the stats paths manually invoke fd_install() and so don't need to
grab a reference before creating the file.
Fixes: ce55c04945 ("KVM: stats: Support binary stats retrieval for a VCPU")
Fixes: fcfe1baedd ("KVM: stats: Support binary stats retrieval for a VM")
Reported-by: Zheng Zhang <zheng.zhang@email.ucr.edu>
Closes: https://lore.kernel.org/all/CAC_GQSr3xzZaeZt85k_RCBd5kfiOve8qXo7a81Cq53LuVQ5r=Q@mail.gmail.com
Cc: stable@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Message-Id: <20230711230131.648752-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2230f9e117 upstream.
We run into guest hang in edk2 firmware when KSM is kept as running on
the host. The edk2 firmware is waiting for status 0x80 from QEMU's pflash
device (TYPE_PFLASH_CFI01) during the operation of sector erasing or
buffered write. The status is returned by reading the memory region of
the pflash device and the read request should have been forwarded to QEMU
and emulated by it. Unfortunately, the read request is covered by an
illegal stage2 mapping when the guest hang issue occurs. The read request
is completed with QEMU bypassed and wrong status is fetched. The edk2
firmware runs into an infinite loop with the wrong status.
The illegal stage2 mapping is populated due to same page sharing by KSM
at (C) even the associated memory slot has been marked as invalid at (B)
when the memory slot is requested to be deleted. It's notable that the
active and inactive memory slots can't be swapped when we're in the middle
of kvm_mmu_notifier_change_pte() because kvm->mn_active_invalidate_count
is elevated, and kvm_swap_active_memslots() will busy loop until it reaches
to zero again. Besides, the swapping from the active to the inactive memory
slots is also avoided by holding &kvm->srcu in __kvm_handle_hva_range(),
corresponding to synchronize_srcu_expedited() in kvm_swap_active_memslots().
CPU-A CPU-B
----- -----
ioctl(kvm_fd, KVM_SET_USER_MEMORY_REGION)
kvm_vm_ioctl_set_memory_region
kvm_set_memory_region
__kvm_set_memory_region
kvm_set_memslot(kvm, old, NULL, KVM_MR_DELETE)
kvm_invalidate_memslot
kvm_copy_memslot
kvm_replace_memslot
kvm_swap_active_memslots (A)
kvm_arch_flush_shadow_memslot (B)
same page sharing by KSM
kvm_mmu_notifier_invalidate_range_start
:
kvm_mmu_notifier_change_pte
kvm_handle_hva_range
__kvm_handle_hva_range
kvm_set_spte_gfn (C)
:
kvm_mmu_notifier_invalidate_range_end
Fix the issue by skipping the invalid memory slot at (C) to avoid the
illegal stage2 mapping so that the read request for the pflash's status
is forwarded to QEMU and emulated by it. In this way, the correct pflash's
status can be returned from QEMU to break the infinite loop in the edk2
firmware.
We tried a git-bisect and the first problematic commit is cd4c718352 ("
KVM: arm64: Convert to the gfn-based MMU notifier callbacks"). With this,
clean_dcache_guest_page() is called after the memory slots are iterated
in kvm_mmu_notifier_change_pte(). clean_dcache_guest_page() is called
before the iteration on the memory slots before this commit. This change
literally enlarges the racy window between kvm_mmu_notifier_change_pte()
and memory slot removal so that we're able to reproduce the issue in a
practical test case. However, the issue exists since commit d5d8184d35
("KVM: ARM: Memory virtualization setup").
Cc: stable@vger.kernel.org # v3.9+
Fixes: d5d8184d35 ("KVM: ARM: Memory virtualization setup")
Reported-by: Shuai Hu <hshuai@redhat.com>
Reported-by: Zhenyu Zhang <zhenyzha@redhat.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Message-Id: <20230615054259.14911-1-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5a2a961be2 upstream.
When alloc_cpumask_var_node() fails for a certain cpu, there might be some
allocated cpumasks for percpu cpu_kick_mask. We should free these cpumasks
or memoryleak will occur.
Fixes: baff59ccdc ("KVM: Pre-allocate cpumasks for kvm_make_all_cpus_request_except()")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Link: https://lore.kernel.org/r/20220823063414.59778-1-linmiaohe@huawei.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2b01281273 ]
Register /dev/kvm, i.e. expose KVM to userspace, only after all other
setup has completed. Once /dev/kvm is exposed, userspace can start
invoking KVM ioctls, creating VMs, etc... If userspace creates a VM
before KVM is done with its configuration, bad things may happen, e.g.
KVM will fail to properly migrate vCPU state if a VM is created before
KVM has registered preemption notifiers.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit baff59ccdc ]
Allocating cpumask dynamically in zalloc_cpumask_var() is not ideal.
Allocation is somewhat slow and can (in theory and when CPUMASK_OFFSTACK)
fail. kvm_make_all_cpus_request_except() already disables preemption so
we can use pre-allocated per-cpu cpumasks instead.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210903075141.403071-8-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stable-dep-of: 2b01281273 ("KVM: Register /dev/kvm as the _very_ last thing during initialization")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae0946cd36 ]
Iterating over set bits in 'vcpu_bitmap' should be faster than going
through all vCPUs, especially when just a few bits are set.
Drop kvm_make_vcpus_request_mask() call from kvm_make_all_cpus_request_except()
to avoid handling the special case when 'vcpu_bitmap' is NULL, move the
code to kvm_make_all_cpus_request_except() itself.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210903075141.403071-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stable-dep-of: 2b01281273 ("KVM: Register /dev/kvm as the _very_ last thing during initialization")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ed51862f2f upstream.
We will introduce the first architecture specific compat vm ioctl in the
next patch. Add all necessary boilerplate to allow architectures to
override compat vm ioctls when necessary.
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20221017184541.2658-2-graf@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 683412ccf6 upstream.
Flush the CPU caches when memory is reclaimed from an SEV guest (where
reclaim also includes it being unmapped from KVM's memslots). Due to lack
of coherency for SEV encrypted memory, failure to flush results in silent
data corruption if userspace is malicious/broken and doesn't ensure SEV
guest memory is properly pinned and unpinned.
Cache coherency is not enforced across the VM boundary in SEV (AMD APM
vol.2 Section 15.34.7). Confidential cachelines, generated by confidential
VM guests have to be explicitly flushed on the host side. If a memory page
containing dirty confidential cachelines was released by VM and reallocated
to another user, the cachelines may corrupt the new user at a later time.
KVM takes a shortcut by assuming all confidential memory remain pinned
until the end of VM lifetime. Therefore, KVM does not flush cache at
mmu_notifier invalidation events. Because of this incorrect assumption and
the lack of cache flushing, malicous userspace can crash the host kernel:
creating a malicious VM and continuously allocates/releases unpinned
confidential memory pages when the VM is running.
Add cache flush operations to mmu_notifier operations to ensure that any
physical memory leaving the guest VM get flushed. In particular, hook
mmu_notifier_invalidate_range_start and mmu_notifier_release events and
flush cache accordingly. The hook after releasing the mmu lock to avoid
contention with other vCPUs.
Cc: stable@vger.kernel.org
Suggested-by: Sean Christpherson <seanjc@google.com>
Reported-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Message-Id: <20220421031407.2516575-4-mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[OP: adjusted KVM_X86_OP_OPTIONAL() -> KVM_X86_OP_NULL, applied
kvm_arch_guest_memory_reclaimed() call in kvm_set_memslot()]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 405294f29f upstream.
Unconditionally get a reference to the /dev/kvm module when creating a VM
instead of using try_get_module(), which will fail if the module is in
the process of being forcefully unloaded. The error handling when
try_get_module() fails doesn't properly unwind all that has been done,
e.g. doesn't call kvm_arch_pre_destroy_vm() and doesn't remove the VM
from the global list. Not removing VMs from the global list tends to be
fatal, e.g. leads to use-after-free explosions.
The obvious alternative would be to add proper unwinding, but the
justification for using try_get_module(), "rmmod --wait", is completely
bogus as support for "rmmod --wait", i.e. delete_module() without
O_NONBLOCK, was removed by commit 3f2b9c9cdf ("module: remove rmmod
--wait option.") nearly a decade ago.
It's still possible for try_get_module() to fail due to the module dying
(more like being killed), as the module will be tagged MODULE_STATE_GOING
by "rmmod --force", i.e. delete_module(..., O_TRUNC), but playing nice
with forced unloading is an exercise in futility and gives a falsea sense
of security. Using try_get_module() only prevents acquiring _new_
references, it doesn't magically put the references held by other VMs,
and forced unloading doesn't wait, i.e. "rmmod --force" on KVM is all but
guaranteed to cause spectacular fireworks; the window where KVM will fail
try_get_module() is tiny compared to the window where KVM is building and
running the VM with an elevated module refcount.
Addressing KVM's inability to play nice with "rmmod --force" is firmly
out-of-scope. Forcefully unloading any module taints kernel (for obvious
reasons) _and_ requires the kernel to be built with
CONFIG_MODULE_FORCE_UNLOAD=y, which is off by default and comes with the
amusing disclaimer that it's "mainly for kernel developers and desperate
users". In other words, KVM is free to scoff at bug reports due to using
"rmmod --force" while VMs may be running.
Fixes: 5f6de5cbeb ("KVM: Prevent module exit until all VMs are freed")
Cc: stable@vger.kernel.org
Cc: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220816053937.2477106-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a1040b0d42 ]
Don't set Accessed/Dirty bits for a struct page with PG_reserved set,
i.e. don't set A/D bits for the ZERO_PAGE. The ZERO_PAGE (or pages
depending on the architecture) should obviously never be written, and
similarly there's no point in marking it accessed as the page will never
be swapped out or reclaimed. The comment in page-flags.h is quite clear
that PG_reserved pages should be managed only by their owner, and
strictly following that mandate also simplifies KVM's logic.
Fixes: 7df003c852 ("KVM: fix overflow of zero page refcount with ksm running")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429010416.2788472-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e8bc242701 upstream.
A KVM device cleanup happens in either of two callbacks:
1) destroy() which is called when the VM is being destroyed;
2) release() which is called when a device fd is closed.
Most KVM devices use 1) but Book3s's interrupt controller KVM devices
(XICS, XIVE, XIVE-native) use 2) as they need to close and reopen during
the machine execution. The error handling in kvm_ioctl_create_device()
assumes destroy() is always defined which leads to NULL dereference as
discovered by Syzkaller.
This adds a checks for destroy!=NULL and adds a missing release().
This is not changing kvm_destroy_devices() as devices with defined
release() should have been removed from the KVM devices list by then.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5c697c367a ]
Initialize debugfs_entry to its semi-magical -ENOENT value when the VM
is created. KVM's teardown when VM creation fails is kludgy and calls
kvm_uevent_notify_change() and kvm_destroy_vm_debugfs() even if KVM never
attempted kvm_create_vm_debugfs(). Because debugfs_entry is zero
initialized, the IS_ERR() checks pass and KVM derefs a NULL pointer.
BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 1068b1067 P4D 1068b1067 PUD 1068b0067 PMD 0
Oops: 0000 [#1] SMP
CPU: 0 PID: 871 Comm: repro Not tainted 5.18.0-rc1+ #825
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:__dentry_path+0x7b/0x130
Call Trace:
<TASK>
dentry_path_raw+0x42/0x70
kvm_uevent_notify_change.part.0+0x10c/0x200 [kvm]
kvm_put_kvm+0x63/0x2b0 [kvm]
kvm_dev_ioctl+0x43a/0x920 [kvm]
__x64_sys_ioctl+0x83/0xb0
do_syscall_64+0x31/0x50
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK>
Modules linked in: kvm_intel kvm irqbypass
Fixes: a44a4cc1c9 ("KVM: Don't create VM debugfs files outside of the VM directory")
Cc: stable@vger.kernel.org
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oupton@google.com>
Reported-by: syzbot+df6fbbd2ee39f21289ef@syzkaller.appspotmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <20220415004622.2207751-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a44a4cc1c9 ]
Unfortunately, there is no guarantee that KVM was able to instantiate a
debugfs directory for a particular VM. To that end, KVM shouldn't even
attempt to create new debugfs files in this case. If the specified
parent dentry is NULL, debugfs_create_file() will instantiate files at
the root of debugfs.
For arm64, it is possible to create the vgic-state file outside of a
VM directory, the file is not cleaned up when a VM is destroyed.
Nonetheless, the corresponding struct kvm is freed when the VM is
destroyed.
Nip the problem in the bud for all possible errant debugfs file
creations by initializing kvm->debugfs_dentry to -ENOENT. In so doing,
debugfs_create_file() will fail instead of creating the file in the root
directory.
Cc: stable@kernel.org
Fixes: 929f45e324 ("kvm: no need to check return value of debugfs_create functions")
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220406235615.1447180-2-oupton@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37b2a6510a ]
Allocations whose size is related to the memslot size can be arbitrarily
large. Do not use kvzalloc/kvcalloc, as those are limited to "not crazy"
sizes that fit in 32 bits.
Cc: stable@vger.kernel.org
Fixes: 7661809d49 ("mm: don't allow oversized kvmalloc() calls")
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5593473a1e upstream.
kvm_vcpu_release() will call kvm_dirty_ring_free(), freeing
ring->dirty_gfns and setting it to NULL. Afterwards, it calls
kvm_arch_vcpu_destroy().
However, if closing the file descriptor races with KVM_RUN in such away
that vcpu->arch.st.preempted == 0, the following call stack leads to a
NULL pointer dereference in kvm_dirty_run_push():
mark_page_dirty_in_slot+0x192/0x270 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3171
kvm_steal_time_set_preempted arch/x86/kvm/x86.c:4600 [inline]
kvm_arch_vcpu_put+0x34e/0x5b0 arch/x86/kvm/x86.c:4618
vcpu_put+0x1b/0x70 arch/x86/kvm/../../../virt/kvm/kvm_main.c:211
vmx_free_vcpu+0xcb/0x130 arch/x86/kvm/vmx/vmx.c:6985
kvm_arch_vcpu_destroy+0x76/0x290 arch/x86/kvm/x86.c:11219
kvm_vcpu_destroy arch/x86/kvm/../../../virt/kvm/kvm_main.c:441 [inline]
The fix is to release the dirty page ring after kvm_arch_vcpu_destroy
has run.
Reported-by: Qiuhao Li <qiuhao@sysec.org>
Reported-by: Gaoning Pan <pgn@zju.edu.cn>
Reported-by: Yongkang Jia <kangel@zju.edu.cn>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5f6de5cbeb upstream.
Tie the lifetime the KVM module to the lifetime of each VM via
kvm.users_count. This way anything that grabs a reference to the VM via
kvm_get_kvm() cannot accidentally outlive the KVM module.
Prior to this commit, the lifetime of the KVM module was tied to the
lifetime of /dev/kvm file descriptors, VM file descriptors, and vCPU
file descriptors by their respective file_operations "owner" field.
This approach is insufficient because references grabbed via
kvm_get_kvm() do not prevent closing any of the aforementioned file
descriptors.
This fixes a long standing theoretical bug in KVM that at least affects
async page faults. kvm_setup_async_pf() grabs a reference via
kvm_get_kvm(), and drops it in an asynchronous work callback. Nothing
prevents the VM file descriptor from being closed and the KVM module
from being unloaded before this callback runs.
Fixes: af585b921e ("KVM: Halt vcpu if page it tries to access is swapped out")
Fixes: 3d3aab1b97 ("KVM: set owner of cpu and vm file operations")
Cc: stable@vger.kernel.org
Suggested-by: Ben Gardon <bgardon@google.com>
[ Based on a patch from Ben implemented for Google's kernel. ]
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220303183328.1499189-2-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4cb9a998b1 ]
I saw the below splatting after the host suspended and resumed.
WARNING: CPU: 0 PID: 2943 at kvm/arch/x86/kvm/../../../virt/kvm/kvm_main.c:5531 kvm_resume+0x2c/0x30 [kvm]
CPU: 0 PID: 2943 Comm: step_after_susp Tainted: G W IOE 5.17.0-rc3+ #4
RIP: 0010:kvm_resume+0x2c/0x30 [kvm]
Call Trace:
<TASK>
syscore_resume+0x90/0x340
suspend_devices_and_enter+0xaee/0xe90
pm_suspend.cold+0x36b/0x3c2
state_store+0x82/0xf0
kernfs_fop_write_iter+0x1b6/0x260
new_sync_write+0x258/0x370
vfs_write+0x33f/0x510
ksys_write+0xc9/0x160
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
lockdep_is_held() can return -1 when lockdep is disabled which triggers
this warning. Let's use lockdep_assert_not_held() which can detect
incorrect calls while holding a lock and it also avoids false negatives
when lockdep is disabled.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1644920142-81249-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f390916c4 ]
Wrap s390's halt_poll_max_steal with READ_ONCE and snapshot the result of
kvm_arch_no_poll() in kvm_vcpu_block() to avoid a mostly-theoretical,
largely benign bug on s390 where the result of kvm_arch_no_poll() could
change due to userspace modifying halt_poll_max_steal while the vCPU is
blocking. The bug is largely benign as it will either cause KVM to skip
updating halt-polling times (no_poll toggles false=>true) or to update
halt-polling times with a slightly flawed block_ns.
Note, READ_ONCE is unnecessary in the current code, add it in case the
arch hook is ever inlined, and to provide a hint that userspace can
change the param at will.
Fixes: 8b905d28ee ("KVM: s390: provide kvm_arch_no_poll function")
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 31c2558569 upstream.
Revert a completely broken check on an "invalid" RIP in SVM's workaround
for the DecodeAssists SMAP errata. kvm_vcpu_gfn_to_memslot() obviously
expects a gfn, i.e. operates in the guest physical address space, whereas
RIP is a virtual (not even linear) address. The "fix" worked for the
problematic KVM selftest because the test identity mapped RIP.
Fully revert the hack instead of trying to translate RIP to a GPA, as the
non-SEV case is now handled earlier, and KVM cannot access guest page
tables to translate RIP.
This reverts commit e72436bc3a.
Fixes: e72436bc3a ("KVM: SVM: avoid infinite loop on NPF from bad address")
Reported-by: Liam Merwick <liam.merwick@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Message-Id: <20220120010719.711476-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5f25e71e31 ]
This is not an unrecoverable situation. Users of kvm_read_guest_offset_cached
and kvm_write_guest_offset_cached must expect the read/write to fail, and
therefore it is possible to just return early with an error value.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit bda44d8447 upstream.
When modifying memslots, snapshot the "old" memslot and copy it to the
"new" memslot's arch data after (re)acquiring slots_arch_lock. x86 can
change a memslot's arch data while memslot updates are in-progress so
long as it holds slots_arch_lock, thus snapshotting a memslot without
holding the lock can result in the consumption of stale data.
Fixes: b10a038e84 ("KVM: mmu: Add slots_arch_lock for memslot arch fields")
Cc: stable@vger.kernel.org
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211104002531.1176691-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b285a5587 upstream.
Reject userspace memslots whose size exceeds the storage capacity of an
"unsigned long". KVM's uAPI takes the size as u64 to support large slots
on 64-bit hosts, but does not account for the size being truncated on
32-bit hosts in various flows. The access_ok() check on the userspace
virtual address in particular casts the size to "unsigned long" and will
check the wrong number of bytes.
KVM doesn't actually support slots whose size doesn't fit in an "unsigned
long", e.g. KVM's internal kvm_memory_slot.npages is an "unsigned long",
not a "u64", and misc arch specific code follows that behavior.
Fixes: fa3d315a4c ("KVM: Validate userspace_addr of memslot when registered")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <20211104002531.1176691-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no user of tlbs_dirty.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210918005636.3675-4-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check for a NULL cpumask_var_t when kicking multiple vCPUs via
cpumask_available(), which performs a !NULL check if and only if cpumasks
are configured to be allocated off-stack. This is a meaningless
optimization, e.g. avoids a TEST+Jcc and TEST+CMOV on x86, but more
importantly helps document that the NULL check is necessary even though
all callers pass in a local variable.
No functional change intended.
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210827092516.1027264-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix a benign data race reported by syzbot+KCSAN[*] by ensuring vcpu->cpu
is read exactly once, and by ensuring the vCPU is booted from guest mode
if kvm_arch_vcpu_should_kick() returns true. Fix a similar race in
kvm_make_vcpus_request_mask() by ensuring the vCPU is interrupted if
kvm_request_needs_ipi() returns true.
Reading vcpu->cpu before vcpu->mode (via kvm_arch_vcpu_should_kick() or
kvm_request_needs_ipi()) means the target vCPU could get migrated (change
vcpu->cpu) and enter !OUTSIDE_GUEST_MODE between reading vcpu->cpud and
reading vcpu->mode. If that happens, the kick/IPI will be sent to the
old pCPU, not the new pCPU that is now running the vCPU or reading SPTEs.
Although failing to kick the vCPU is not exactly ideal, practically
speaking it cannot cause a functional issue unless there is also a bug in
the caller, and any such bug would exist regardless of kvm_vcpu_kick()'s
behavior.
The purpose of sending an IPI is purely to get a vCPU into the host (or
out of reading SPTEs) so that the vCPU can recognize a change in state,
e.g. a KVM_REQ_* request. If vCPU's handling of the state change is
required for correctness, KVM must ensure either the vCPU sees the change
before entering the guest, or that the sender sees the vCPU as running in
guest mode. All architectures handle this by (a) sending the request
before calling kvm_vcpu_kick() and (b) checking for requests _after_
setting vcpu->mode.
x86's READING_SHADOW_PAGE_TABLES has similar requirements; KVM needs to
ensure it kicks and waits for vCPUs that started reading SPTEs _before_
MMU changes were finalized, but any vCPU that starts reading after MMU
changes were finalized will see the new state and can continue on
uninterrupted.
For uses of kvm_vcpu_kick() that are not paired with a KVM_REQ_*, e.g.
x86's kvm_arch_sync_dirty_log(), the order of the kick must not be relied
upon for functional correctness, e.g. in the dirty log case, userspace
cannot assume it has a 100% complete log if vCPUs are still running.
All that said, eliminate the benign race since the cost of doing so is an
"extra" atomic cmpxchg() in the case where the target vCPU is loaded by
the current pCPU or is not loaded at all. I.e. the kick will be skipped
due to kvm_vcpu_exiting_guest_mode() seeing a compatible vcpu->mode as
opposed to the kick being skipped because of the cpu checks.
Keep the "cpu != me" checks even though they appear useless/impossible at
first glance. x86 processes guest IPI writes in a fast path that runs in
IN_GUEST_MODE, i.e. can call kvm_vcpu_kick() from IN_GUEST_MODE. And
calling kvm_vm_bugged()->kvm_make_vcpus_request_mask() from IN_GUEST or
READING_SHADOW_PAGE_TABLES is perfectly reasonable.
Note, a race with the cpu_online() check in kvm_vcpu_kick() likely
persists, e.g. the vCPU could exit guest mode and get offlined between
the cpu_online() check and the sending of smp_send_reschedule(). But,
the online check appears to exist only to avoid a WARN in x86's
native_smp_send_reschedule() that fires if the target CPU is not online.
The reschedule WARN exists because CPU offlining takes the CPU out of the
scheduling pool, i.e. the WARN is intended to detect the case where the
kernel attempts to schedule a task on an offline CPU. The actual sending
of the IPI is a non-issue as at worst it will simpy be dropped on the
floor. In other words, KVM's usurping of the reschedule IPI could
theoretically trigger a WARN if the stars align, but there will be no
loss of functionality.
[*] https://syzkaller.appspot.com/bug?extid=cd4154e502f43f10808a
Cc: Venkatesh Srinivas <venkateshs@google.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Fixes: 97222cc831 ("KVM: Emulate local APIC in kernel")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210827092516.1027264-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
grow_halt_poll_ns() ignores values between 0 and
halt_poll_ns_grow_start (10000 by default). However,
when we shrink halt_poll_ns we may fall way below
halt_poll_ns_grow_start and endup with halt_poll_ns
values that don't make a lot of sense: like 1 or 9,
or 19.
VCPU1 trace (halt_poll_ns_shrink equals 2):
VCPU1 grow 10000
VCPU1 shrink 5000
VCPU1 shrink 2500
VCPU1 shrink 1250
VCPU1 shrink 625
VCPU1 shrink 312
VCPU1 shrink 156
VCPU1 shrink 78
VCPU1 shrink 39
VCPU1 shrink 19
VCPU1 shrink 9
VCPU1 shrink 4
Mirror what grow_halt_poll_ns() does and set halt_poll_ns
to 0 as soon as new shrink-ed halt_poll_ns value falls
below halt_poll_ns_grow_start.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210902031100.252080-1-senozhatsky@chromium.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the unused function as reported by test bot.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210901230904.15164-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Page ownership tracking between host EL1 and EL2
- Rely on userspace page tables to create large stage-2 mappings
- Fix incompatibility between pKVM and kmemleak
- Fix the PMU reset state, and improve the performance of the virtual PMU
- Move over to the generic KVM entry code
- Address PSCI reset issues w.r.t. save/restore
- Preliminary rework for the upcoming pKVM fixed feature
- A bunch of MM cleanups
- a vGIC fix for timer spurious interrupts
- Various cleanups
-----BEGIN PGP SIGNATURE-----
iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAmEnfogPHG1hekBrZXJu
ZWwub3JnAAoJECPQ0LrRPXpDF9oQAINWHN1n30gsxcErMV8gH+XAyhDq2vTjkExQ
Qz5ddo4R5zeVkj0nkunFSK+W3xYz+W97X3I+IaiiHvk5D6dUatj37IyYlazX5iFT
7mbjTAqY7GRxfd6um7uK+CTRCApXY49GGkCVLGA5f+6mQ0JMVXaK9AKlsXKWUQLZ
JvLasUgKkseN6IEJWmPDNBdIeiKBTZloeZMdlM2vSm34HsuirSS5LmshdzJQzSk8
QSEqwXZX50afzJLNlB9Qa6V1tokjZVoYIBk0vAPO83tTh9HIyGL/PFAqBeq2rnWT
M19fFFbx5vizap4ICbpviLmZ5AOywCoBmbPBT79eMAJ53rOqHUJhU1y/3DoiVzxu
LJZI4wmGBQZVivOWOqyEZcNtTAagPLhyrLhMzYulBLwAjfFJmUHdSOxYtx+2Ysvr
SDIPN31FKWrvifTXTqJHDmaaXusi2CNZUOPzVSe2I14SbX+ZX2ny9DltlbRgPNuc
hGJagI5cZc0ngd4mAIzjjNmgBS2B+dSc8dOo71dRNJRLtQLiNHcAyQNJyFme+4xI
NpvpkvzxBAs8rG2X0YIR/Cz3W3yZoCYuQNcoPk7+F/bUTK47VocQCS+gLucHVLbT
H4286EV5n4nZ7E01oJ6uWnDnslPvrx9Sz2fxsrWYkBDR+xrz0EprrGsftFaILprz
Ic43uXfd
=LuHM
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 5.15
- Page ownership tracking between host EL1 and EL2
- Rely on userspace page tables to create large stage-2 mappings
- Fix incompatibility between pKVM and kmemleak
- Fix the PMU reset state, and improve the performance of the virtual PMU
- Move over to the generic KVM entry code
- Address PSCI reset issues w.r.t. save/restore
- Preliminary rework for the upcoming pKVM fixed feature
- A bunch of MM cleanups
- a vGIC fix for timer spurious interrupts
- Various cleanups
Add a new stat that counts the number of times a remote TLB flush is
requested, regardless of whether it kicks vCPUs out of guest mode. This
allows us to look at how often flushes are initiated.
Unlike remote_tlb_flush, this one applies to ARM's instruction-set-based
TLB flush implementation, so apply it there too.
Original-by: David Matlack <dmatlack@google.com>
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Message-Id: <20210817002639.3856694-1-jingzhangos@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't export KVM's MMU notifier count helpers, under no circumstance
should any downstream module, including x86's vendor code, have a
legitimate reason to piggyback KVM's MMU notifier logic. E.g in the x86
case, only KVM's MMU should be elevating the notifier count, and that
code is always built into the core kvm.ko module.
Fixes: edb298c663 ("KVM: x86/mmu: bump mmu notifier count in kvm_zap_gfn_range")
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210902175951.1387989-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add three log histogram stats to record the distribution of time spent
on successful polling, failed polling and VCPU wait.
halt_poll_success_hist: Distribution of spent time for a successful poll.
halt_poll_fail_hist: Distribution of spent time for a failed poll.
halt_wait_hist: Distribution of time a VCPU has spent on waiting.
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Message-Id: <20210802165633.1866976-6-jingzhangos@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add simple stats halt_wait_ns to record the time a VCPU has spent on
waiting for all architectures (not just powerpc).
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Message-Id: <20210802165633.1866976-5-jingzhangos@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This together with previous patch, ensures that
kvm_zap_gfn_range doesn't race with page fault
running on another vcpu, and will make this page fault code
retry instead.
This is based on a patch suggested by Sean Christopherson:
https://lkml.org/lkml/2021/7/22/1025
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210810205251.424103-5-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow archs to create arch-specific nodes under kvm->debugfs_dentry directory
besides the stats fields. The new interface kvm_arch_create_vm_debugfs() is
defined but not yet used. It's called after kvm->debugfs_dentry is created, so
it can be referenced directly in kvm_arch_create_vm_debugfs(). Arch should
define their own versions when they want to create extra debugfs nodes.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210730220455.26054-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These stores are copied and pasted from the "if" statements above.
They are dead and while they are not really a bug, they can be
confusing to anyone reading the code as well. Remove them.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The memslot for a given gfn is looked up multiple times during page
fault handling. Avoid binary searching for it multiple times by caching
the most recently used slot. There is an existing VM-wide last_used_slot
but that does not work well for cases where vCPUs are accessing memory
in different slots (see performance data below).
Another benefit of caching the most recently use slot (versus looking
up the slot once and passing around a pointer) is speeding up memslot
lookups *across* faults and during spte prefetching.
To measure the performance of this change I ran dirty_log_perf_test with
64 vCPUs and 64 memslots and measured "Populate memory time" and
"Iteration 2 dirty memory time". Tests were ran with eptad=N to force
dirty logging to use fast_page_fault so its performance could be
measured.
Config | Metric | Before | After
---------- | ----------------------------- | ------ | ------
tdp_mmu=Y | Populate memory time | 6.76s | 5.47s
tdp_mmu=Y | Iteration 2 dirty memory time | 2.83s | 0.31s
tdp_mmu=N | Populate memory time | 20.4s | 18.7s
tdp_mmu=N | Iteration 2 dirty memory time | 2.65s | 0.30s
The "Iteration 2 dirty memory time" results are especially compelling
because they are equivalent to running the same test with a single
memslot. In other words, fast_page_fault performance no longer scales
with the number of memslots.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210804222844.1419481-4-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
lru_slot is used to keep track of the index of the most-recently used
memslot. The correct acronym would be "mru" but that is not a common
acronym. So call it last_used_slot which is a bit more obvious.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210804222844.1419481-2-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM creates a debugfs directory for each VM in order to store statistics
about the virtual machine. The directory name is built from the process
pid and a VM fd. While generally unique, it is possible to keep a
file descriptor alive in a way that causes duplicate directories, which
manifests as these messages:
[ 471.846235] debugfs: Directory '20245-4' with parent 'kvm' already present!
Even though this should not happen in practice, it is more or less
expected in the case of KVM for testcases that call KVM_CREATE_VM and
close the resulting file descriptor repeatedly and in parallel.
When this happens, debugfs_create_dir() returns an error but
kvm_create_vm_debugfs() goes on to allocate stat data structs which are
later leaked. The slow memory leak was spotted by syzkaller, where it
caused OOM reports.
Since the issue only affects debugfs, do a lookup before calling
debugfs_create_dir, so that the message is downgraded and rate-limited.
While at it, ensure kvm->debugfs_dentry is NULL rather than an error
if it is not created. This fixes kvm_destroy_vm_debugfs, which was not
checking IS_ERR_OR_NULL correctly.
Cc: stable@vger.kernel.org
Fixes: 536a6f88c4 ("KVM: Create debugfs dir and stat files for each VM")
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Avoid taking mmu_lock for .invalidate_range_{start,end}() notifications
that are unrelated to KVM. This is possible now that memslot updates are
blocked from range_start() to range_end(); that ensures that lock elision
happens in both or none, and therefore that mmu_notifier_count updates
(which must occur while holding mmu_lock for write) are always paired
across start->end.
Based on patches originally written by Ben Gardon.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We would like to avoid taking mmu_lock for .invalidate_range_{start,end}()
notifications that are unrelated to KVM. Because mmu_notifier_count
must be modified while holding mmu_lock for write, and must always
be paired across start->end to stay balanced, lock elision must
happen in both or none. Therefore, in preparation for this change,
this patch prevents memslot updates across range_start() and range_end().
Note, technically flag-only memslot updates could be allowed in parallel,
but stalling a memslot update for a relatively short amount of time is
not a scalability issue, and this is all more than complex enough.
A long note on the locking: a previous version of the patch used an rwsem
to block the memslot update while the MMU notifier run, but this resulted
in the following deadlock involving the pseudo-lock tagged as
"mmu_notifier_invalidate_range_start".
======================================================
WARNING: possible circular locking dependency detected
5.12.0-rc3+ #6 Tainted: G OE
------------------------------------------------------
qemu-system-x86/3069 is trying to acquire lock:
ffffffff9c775ca0 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}, at: __mmu_notifier_invalidate_range_end+0x5/0x190
but task is already holding lock:
ffffaff7410a9160 (&kvm->mmu_notifier_slots_lock){.+.+}-{3:3}, at: kvm_mmu_notifier_invalidate_range_start+0x36d/0x4f0 [kvm]
which lock already depends on the new lock.
This corresponds to the following MMU notifier logic:
invalidate_range_start
take pseudo lock
down_read() (*)
release pseudo lock
invalidate_range_end
take pseudo lock (**)
up_read()
release pseudo lock
At point (*) we take the mmu_notifiers_slots_lock inside the pseudo lock;
at point (**) we take the pseudo lock inside the mmu_notifiers_slots_lock.
This could cause a deadlock (ignoring for a second that the pseudo lock
is not a lock):
- invalidate_range_start waits on down_read(), because the rwsem is
held by install_new_memslots
- install_new_memslots waits on down_write(), because the rwsem is
held till (another) invalidate_range_end finishes
- invalidate_range_end sits waits on the pseudo lock, held by
invalidate_range_start.
Removing the fairness of the rwsem breaks the cycle (in lockdep terms,
it would change the *shared* rwsem readers into *shared recursive*
readers), so open-code the wait using a readers count and a
spinlock. This also allows handling blockable and non-blockable
critical section in the same way.
Losing the rwsem fairness does theoretically allow MMU notifiers to
block install_new_memslots forever. Note that mm/mmu_notifier.c's own
retry scheme in mmu_interval_read_begin also uses wait/wake_up
and is likewise not fair.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce this safe version of kvm_get_kvm() so that it can be called even
during vm destruction. Use it in kvm_debugfs_open() and remove the verbose
comment. Prepare to be used elsewhere.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210625153214.43106-3-peterx@redhat.com>
[Preserve the comment in kvm_debugfs_open. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that arm64 has stopped using kvm_is_transparent_hugepage(),
we can remove it, as well as PageTransCompoundMap() which was
only used by the former.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210726153552.1535838-5-maz@kernel.org
The arguments to the KVM_CLEAR_DIRTY_LOG ioctl include a pointer,
therefore it needs a compat ioctl implementation. Otherwise,
32-bit userspace fails to invoke it on 64-bit kernels; for x86
it might work fine by chance if the padding is zero, but not
on big-endian architectures.
Reported-by: Thomas Sattler
Cc: stable@vger.kernel.org
Fixes: 2a31b9db15 ("kvm: introduce manual dirty log reprotect")
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SMT siblings share caches and other hardware, and busy halt polling
will degrade its sibling performance if its sibling is working
Sean Christopherson suggested as below:
"Rather than disallowing halt-polling entirely, on x86 it should be
sufficient to simply have the hardware thread yield to its sibling(s)
via PAUSE. It probably won't get back all performance, but I would
expect it to be close.
This compiles on all KVM architectures, and AFAICT the intended usage
of cpu_relax() is identical for all architectures."
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Message-Id: <20210727111247.55510-1-lirongqing@baidu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Fixes for host SMIs on AMD
* Fixes for guest SMIs on AMD
* Fixes for selftests on s390 and ARM
* Fix memory leak
* Enforce no-instrumentation area on vmentry when hardware
breakpoints are in use.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmDwRi4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOt4AgAl6xEkMwDC74d/QFIOA7s2GD3ugfa
z5XqGN1qz/nmEMnuIg6/tjTXDPmn/dfLMqy8RGZfyUv6xbgPcv/7JuFMRILvwGTb
SbOVrGnR/QOhMdlfWH34qDkXeEsthTXSgQgVm/iiED0TttvQYVcZ/E9mgzaWQXor
T1yTug2uAUXJ1EBxY0ZBo2kbh+BvvdmhEF0pksZOuwqZdH3zn3QCXwAwkL/OtUYE
M6nNn3j1LU38C4OK1niXOZZVOuMIdk/l7LyFpjUQTFlIqitQAPtBE5MD+K+A9oC2
Yocxyj2tId1e6o8bLic/oN8/LpdORTvA/wDMj5M1DcMzvxQuQIpGYkcVGg==
=gjVA
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- Allow again loading KVM on 32-bit non-PAE builds
- Fixes for host SMIs on AMD
- Fixes for guest SMIs on AMD
- Fixes for selftests on s390 and ARM
- Fix memory leak
- Enforce no-instrumentation area on vmentry when hardware breakpoints
are in use.
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
KVM: selftests: smm_test: Test SMM enter from L2
KVM: nSVM: Restore nested control upon leaving SMM
KVM: nSVM: Fix L1 state corruption upon return from SMM
KVM: nSVM: Introduce svm_copy_vmrun_state()
KVM: nSVM: Check that VM_HSAVE_PA MSR was set before VMRUN
KVM: nSVM: Check the value written to MSR_VM_HSAVE_PA
KVM: SVM: Fix sev_pin_memory() error checks in SEV migration utilities
KVM: SVM: Return -EFAULT if copy_to_user() for SEV mig packet header fails
KVM: SVM: add module param to control the #SMI interception
KVM: SVM: remove INIT intercept handler
KVM: SVM: #SMI interception must not skip the instruction
KVM: VMX: Remove vmx_msr_index from vmx.h
KVM: X86: Disable hardware breakpoints unconditionally before kvm_x86->run()
KVM: selftests: Address extra memslot parameters in vm_vaddr_alloc
kvm: debugfs: fix memory leak in kvm_create_vm_debugfs
KVM: x86/pmu: Clear anythread deprecated bit when 0xa leaf is unsupported on the SVM
KVM: mmio: Fix use-after-free Read in kvm_vm_ioctl_unregister_coalesced_mmio
KVM: SVM: Revert clearing of C-bit on GPA in #NPF handler
KVM: x86/mmu: Do not apply HPA (memory encryption) mask to GPAs
KVM: x86: Use kernel's x86_phys_bits to handle reduced MAXPHYADDR
...
