The CRYPTO_TFM_RES_* flags were apparently meant as a way to make the
->setkey() functions provide more information about errors. But these
flags weren't actually being used or tested, and in many cases they
weren't being set correctly anyway. So they've now been removed.
Also, if someone ever actually needs to start better distinguishing
->setkey() errors (which is somewhat unlikely, as this has been unneeded
for a long time), we'd be much better off just defining different return
values, like -EINVAL if the key is invalid for the algorithm vs.
-EKEYREJECTED if the key was rejected by a policy like "no weak keys".
That would be much simpler, less error-prone, and easier to test.
So just remove CRYPTO_TFM_RES_MASK and all the unneeded logic that
propagates these flags around.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CRYPTO_TFM_RES_BAD_KEY_LEN flag was apparently meant as a way to
make the ->setkey() functions provide more information about errors.
However, no one actually checks for this flag, which makes it pointless.
Also, many algorithms fail to set this flag when given a bad length key.
Reviewing just the generic implementations, this is the case for
aes-fixed-time, cbcmac, echainiv, nhpoly1305, pcrypt, rfc3686, rfc4309,
rfc7539, rfc7539esp, salsa20, seqiv, and xcbc. But there are probably
many more in arch/*/crypto/ and drivers/crypto/.
Some algorithms can even set this flag when the key is the correct
length. For example, authenc and authencesn set it when the key payload
is malformed in any way (not just a bad length), the atmel-sha and ccree
drivers can set it if a memory allocation fails, and the chelsio driver
sets it for bad auth tag lengths, not just bad key lengths.
So even if someone actually wanted to start checking this flag (which
seems unlikely, since it's been unused for a long time), there would be
a lot of work needed to get it working correctly. But it would probably
be much better to go back to the drawing board and just define different
return values, like -EINVAL if the key is invalid for the algorithm vs.
-EKEYREJECTED if the key was rejected by a policy like "no weak keys".
That would be much simpler, less error-prone, and easier to test.
So just remove this flag.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes another hang case on the EIP97 caused by sending
invalidation tokens to the hardware when doing basic (3)DES ECB/CBC
operations. Invalidation tokens are an EIP197 feature and needed nor
supported by the EIP97. So they should not be sent for that device.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@rambus.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The EIP97 hardware cannot handle zero length input data and will (usually)
hang when presented with this anyway. This patch converts any zero length
input to a 1 byte dummy input to prevent this hanging.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@rambus.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Due to the additions of support for modes like AES-CCM and AES-GCM, which
require large command tokens, the size of the descriptor has grown such that
it now does not fit into the descriptor cache of a standard EIP97 anymore.
This means that the driver no longer works on the Marvell Armada 3700LP chip
(as used on e.g. Espressobin) that it has always supported.
Additionally, performance on EIP197's like Marvell A8K may also degrade
due to being able to fit less descriptors in the on-chip cache.
Putting these tokens into the descriptor was really a hack and not how the
design was supposed to be used - resource allocation did not account for it.
So what this patch does, is move the command token out of the descriptor.
To avoid having to allocate buffers on the fly for these command tokens,
they are stuffed in a "shadow ring", which is a circular buffer of fixed
size blocks that runs in lock-step with the descriptor ring. i.e. there is
one token block per descriptor. The descriptor ring itself is then pre-
populated with the pointers to these token blocks so these do not need to
be filled in when building the descriptors later.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@rambus.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes coccicheck warning:
drivers/crypto/inside-secure/safexcel_cipher.c:2534:1-3: WARNING: PTR_ERR_OR_ZERO can be used
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixed 2 copy-paste mistakes in the commit mentioned below that caused
authenc w/ (3)DES to consistently fail on Macchiatobin (but strangely
work fine on x86+FPGA??).
Now fully tested on both platforms.
Fixes: 13a1bb93f7 ("crypto: inside-secure - Fixed warnings...")
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixed mask used for CFSIZE and RFSIZE fields of HIA_OPTIONS register,
these were all 1 bit too wide. Which caused the probing of a standard
EIP97 to actually hang due to assume way too large descriptor FIFO's.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
safexcel_remove misses disabling priv->reg_clk like what is done when
probe fails.
Add the missed call to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This fixes a bunch of endianness related sparse warnings reported by the
kbuild test robot as well as Ben Dooks.
Credits for the fix to safexcel.c go to Ben Dooks.
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
safexcel_pci_remove() is only used locally in the module and not exported,
so added a static function specifier.
This fixes a sparse issue reported by Ben Dooks.
Fixes: 625f269a5a ("crypto: inside-secure - add support for...")
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Always take the zero length hash value for SM3 from the local constant
to avoid a reported build error when SM3 is configured to be a module.
Fixes: 0f2bc13181 ("crypto: inside-secure - Added support for...")
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Antoine Tenart <antoine.tenart@ack.tf>
Acked-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a spelling mistake in a dev_err message. Fix it. Add in missing
newline.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When both PCI and OF are disabled, no drivers are registered, and
we get some unused-function warnings:
drivers/crypto/inside-secure/safexcel.c:1221:13: error: unused function 'safexcel_unregister_algorithms' [-Werror,-Wunused-function]
static void safexcel_unregister_algorithms(struct safexcel_crypto_priv *priv)
drivers/crypto/inside-secure/safexcel.c:1307:12: error: unused function 'safexcel_probe_generic' [-Werror,-Wunused-function]
static int safexcel_probe_generic(void *pdev,
drivers/crypto/inside-secure/safexcel.c:1531:13: error: unused function 'safexcel_hw_reset_rings' [-Werror,-Wunused-function]
static void safexcel_hw_reset_rings(struct safexcel_crypto_priv *priv)
It's better to make the compiler see what is going on and remove
such ifdef checks completely. In case of PCI, this is trivial since
pci_register_driver() is defined to an empty function that makes the
compiler subsequently drop all unused code silently.
The global pcireg_rc/ofreg_rc variables are not actually needed here
since the driver registration does not fail in ways that would make
it helpful.
For CONFIG_OF, an IS_ENABLED() check is still required, since platform
drivers can exist both with and without it.
A little change to linux/pci.h is needed to ensure that
pcim_enable_device() is visible to the driver. Moving the declaration
outside of ifdef would be sufficient here, but for consistency with the
rest of the file, adding an inline helper is probably best.
Fixes: 212ef6f29e ("crypto: inside-secure - Fix unused variable warning when CONFIG_PCI=n")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci.h
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A previous fixup avoided an unused variable warning but replaced
it with a slightly scarier warning:
drivers/crypto/inside-secure/safexcel.c:1100:6: error: variable 'irq' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
This is harmless as it is impossible to get into this case, but
the compiler has no way of knowing that. Add an explicit error
handling case to make it obvious to both compilers and humans
reading the source.
Fixes: 212ef6f29e ("crypto: inside-secure - Fix unused variable warning when CONFIG_PCI=n")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the EIP196, which is an EIP197 derivative
that has no classification hardware and a simplified record cache.
The patch has been tested with the eip196b-ie and eip197c-iewxkbc
configurations on the Xilinx VCU118 development board as well as on the
Macchiatobin board (Marvell A8K - EIP197b-ieswx), including the crypto
extra tests.
Note that this patchset applies on top of the earlier submitted
"Add support for eip197f_iewc" series.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The current driver assumes one dedicated ring interrupt controller per
ring. However, some existing EIP(1)97 HW has less ring AIC's than rings.
This patch allows the driver to work with such HW by detecting how many
ring AIC's are present and restricting the number of rings it *uses* by
the number of ring AIC's present. This allows it to at least function.
(optimization for the future: add ring dispatch functionality in the
interrupt service routine such that multiple rings can be supported from
one ring AIC, allowing all rings to be used)
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for large EIP197's with a 256 bit wide internal
bus, which affects the format of the result descriptor due to internal
alignment requirements.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for rfc4309(ccm(aes)) for use with IPsec ESP
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for rfc4543(gcm(aes)) - i.e. AES-GMAC - for use
with IPsec ESP
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for rfc4106(gcm(aes)) for use with IPsec ESP
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixed a corner case admin RAM probing issue witnessed on the
Xilinx VCU118 FPGA development board with an EIP197 configuration with
4096 words of admin RAM, of which only 2050 were recognised.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch corrects an error in the Transform Record Cache initialization
code that was causing intermittent stability problems on the Macchiatobin
board.
Unfortunately, due to HW platform specifics, the problem could not happen
on the main development platform, being the VCU118 Xilinx development
board. And since it was a problem with hash table access, it was very
dependent on the actual physical context record DMA buffers being used,
i.e. with some (bad) luck it could seemingly work quit stable for a while.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the authenc(hmac(sha224),cbc(des)),
authenc(hmac(sha256),cbc(des)), authenc(hmac(sha384),cbc(des))
and authenc(hmac(sha512),cbc(des)) aead's
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the authenc(hmac(sha224),cbc(des3_ede)),
authenc(hmac(sha256),cbc(des3_ede)), authenc(hmac(sha384),cbc(des3_ede))
and authenc(hmac(sha512),cbc(des3_ede)) aead's
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the authenc(hmac(sha1),cbc(des)) aead
changes since v1:
- rebased on top of DES changes made to cryptodev/master
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for hmac(sha3-224), hmac(sha3-256), hmac(sha3-384)
and hmac(sha3-512) authentication algorithms.
The patch has been tested with the eip197c_iewxkbc configuration on the
Xilinx VCU118 development board, including the testmgr extra tests.
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for sha3-224, sha3-256, sha3-384 and sha3-512
basic hashes.
The patch has been tested with the eip197c_iewxkbc configuration on the
Xilinx VCU118 development board, including the testmgr extra tests.
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the authenc(hmac(sha1),cbc(sm4)),
authenc(hmac(sm3),cbc(sm4)), authenc(hmac(sha1),rfc3686(ctr(sm4))),
and authenc(hmac(sm3),rfc3686(ctr(sm4))) aead ciphersuites.
These are necessary to support IPsec according to the Chinese standard
GM/T 022-1014 - IPsec VPN specification.
Note that there are no testvectors present in testmgr for these
ciphersuites. However, considering all building blocks have already been
verified elsewhere, it is fair to assume the generic implementation to be
correct-by-construction.
The hardware implementation has been fuzzed against this generic
implementation by means of a locally modified testmgr. The intention is
to upstream these testmgr changes but this is pending other testmgr changes
being made by Eric Biggers.
The patch has been tested with the eip197c_iewxkbc configuration on the
Xilinx VCU118 development board, using the abovementioned modified testmgr
This patch applies on top of "Add support for SM4 ciphers" and needs to
be applied before "Add (HMAC) SHA3 support".
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for SM4 in (32 bit) CTR mode, i.e. skcipher
rfc3686(ctr(sm4)).
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for SM4 in CFB mode, i.e. skcipher cfb(sm4).
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for SM4 in OFB mode, i.e. skcipher ofb(sm4).
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for SM4 in CBC mode, i.e. skcipher cbc(sm4).
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for SM4 in ECB mode, i.e. skcipher ecb(sm4).
changes since v1:
- make SAFEXCEL_SM4 case entry explit, using the proper SM4_BLOCK_SIZE
instead of "borrowing" the AES code which "coincidentally" works
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Added support for the hmac(sm3) ahash authentication algorithm
changes since v1:
- added Acked-by tag below, no changes to the source
changes since v2:
- nothing
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Added support for the SM3 ahash algorithm
changes since v1:
- moved definition of CONTEXT_CONTROL_CRYPTO_ALG_SM3 (0x7) up above 0xf
changes since v2:
- allow compilation if CONFIG_CRYPTO_SM3 is not set
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the Chacha20-Poly1305 cipher suite.
It adds both the basic rfc7539(chacha20,poly1305) as well as the
rfc7539esp(chacha20,poly1305) variant for IPsec ESP acceleration.
changes since v1:
- rebased on top of DES library changes done on cryptodev/master
- fixed crypto/Kconfig so that generic fallback is compiled as well
changes since v2:
- nothing
changes since v3:
- Fixed a problem where the tcrypt performance test would run fully on the
fallback cipher instead of the HW due to using an AAD length of 8 for
rfc7539esp. While this is not actually legal ESP (which includes SPI and
sequence number in the AAD as well), it is both inconvenient and not
necessary to run these vectors on the fallback cipher.
- Due to above, also realised that for plain (non-ESP) rfc7539, you
probably want to be able to run vectors with less than 8 bytes of AAD
on the HW, and this is actually possible as long as cryptlen is large
enough, so made that possible as well.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Added support for the CHACHA20 skcipher algorithm.
Tested on an eip197c-iesb configuration in the Xilinx VCU118 devboard,
passes all testmgr vectors plus the extra fuzzing tests.
changes since v1:
- rebased on top of DES library changes done on cryptodev/master
- fixed crypto/Kconfig so that generic fallback is compiled as well
changes since v2:
- made switch entry SAFEXCEL_AES explit and added empty default, as
requested by Antoine Tenart. Also needed to make SM4 patches apply.
changes since v3:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the AES-CMAC authentication algorithm.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the AES XCBC authentication algorithm
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the AES-CBCMAC authentication algorithm.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the CRC32 "hash" algorithm
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes an unused variable warning from the compiler when the
driver is being compiled without PCI support in the kernel.
Fixes: 625f269a5a ("crypto: inside-secure - add support for...")
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch actually probes the transform record cache data and
administration RAM sizes, instead of making assumptions, and then
configures the TRC based on the actually probed values.
This allows the driver to work with EIP197 HW that has TRC RAM
sizes different from those of the Marvell EIP197B/D variants.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch derives the result descriptor fetch count from the actual
FIFO size advertised by the hardware. Fetching result descriptors
one at a time is a performance bottleneck for small blocks, especially
on hardware with multiple pipes. Even moreso if the HW has few rings.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch derives the command descriptor fetch count from the actual
FIFO size advertised by the hardware. Fetching command descriptors
one at a time is a performance bottleneck for small blocks, especially
on hardware with multiple pipes. Even moreso if the HW has few rings.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch enables algorithms that did not fit the original 32 bit
FUNCTION_EN register anymore via the FUNCTION2_EN extension reg.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch corrects the configuration of the EIP197_PE_EIP96_TOKEN_CTRL
register. Previous value was wrong and potentially dangerous.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds automatic EIP97/EIP197 detection, so it does not need to
rely on any static value from the device table anymore. In particular,
the static value from the table won't work for PCI devboards that cannot
be further identified save from this direct hardware probing.
The patch also adds automatic host xs endianness detection & correction.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
