Originally, after submitting request into virtio crypto control
queue, the guest side polls the result from the virt queue. This
works like following:
CPU0 CPU1 ... CPUx CPUy
| | | |
\ \ / /
\--------spin_lock(&vcrypto->ctrl_lock)-------/
|
virtqueue add & kick
|
busy poll virtqueue
|
spin_unlock(&vcrypto->ctrl_lock)
...
There are two problems:
1, The queue depth is always 1, the performance of a virtio crypto
device gets limited. Multi user processes share a single control
queue, and hit spin lock race from control queue. Test on Intel
Platinum 8260, a single worker gets ~35K/s create/close session
operations, and 8 workers get ~40K/s operations with 800% CPU
utilization.
2, The control request is supposed to get handled immediately, but
in the current implementation of QEMU(v6.2), the vCPU thread kicks
another thread to do this work, the latency also gets unstable.
Tracking latency of virtio_crypto_alg_akcipher_close_session in 5s:
usecs : count distribution
0 -> 1 : 0 | |
2 -> 3 : 7 | |
4 -> 7 : 72 | |
8 -> 15 : 186485 |************************|
16 -> 31 : 687 | |
32 -> 63 : 5 | |
64 -> 127 : 3 | |
128 -> 255 : 1 | |
256 -> 511 : 0 | |
512 -> 1023 : 0 | |
1024 -> 2047 : 0 | |
2048 -> 4095 : 0 | |
4096 -> 8191 : 0 | |
8192 -> 16383 : 2 | |
This means that a CPU may hold vcrypto->ctrl_lock as long as 8192~16383us.
To improve the performance of control queue, a request on control queue
waits completion instead of busy polling to reduce lock racing, and gets
completed by control queue callback.
CPU0 CPU1 ... CPUx CPUy
| | | |
\ \ / /
\--------spin_lock(&vcrypto->ctrl_lock)-------/
|
virtqueue add & kick
|
---------spin_unlock(&vcrypto->ctrl_lock)------
/ / \ \
| | | |
wait wait wait wait
Test this patch, the guest side get ~200K/s operations with 300% CPU
utilization.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220506131627.180784-4-pizhenwei@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Originally, all of the control requests share a single buffer(
ctrl & input & ctrl_status fields in struct virtio_crypto), this
allows queue depth 1 only, the performance of control queue gets
limited by this design.
In this patch, each request allocates request buffer dynamically, and
free buffer after request, so the scope protected by ctrl_lock also
get optimized here.
It's possible to optimize control queue depth in the next step.
A necessary comment is already in code, still describe it again:
/*
* Note: there are padding fields in request, clear them to zero before
* sending to host to avoid to divulge any information.
* Ex, virtio_crypto_ctrl_request::ctrl::u::destroy_session::padding[48]
*/
So use kzalloc to allocate buffer of struct virtio_crypto_ctrl_request.
Potentially dereferencing uninitialized variables:
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220506131627.180784-3-pizhenwei@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use temporary variable to make code easy to read and maintain.
/* Pad cipher's parameters */
vcrypto->ctrl.u.sym_create_session.op_type =
cpu_to_le32(VIRTIO_CRYPTO_SYM_OP_CIPHER);
vcrypto->ctrl.u.sym_create_session.u.cipher.para.algo =
vcrypto->ctrl.header.algo;
vcrypto->ctrl.u.sym_create_session.u.cipher.para.keylen =
cpu_to_le32(keylen);
vcrypto->ctrl.u.sym_create_session.u.cipher.para.op =
cpu_to_le32(op);
-->
sym_create_session = &ctrl->u.sym_create_session;
sym_create_session->op_type = cpu_to_le32(VIRTIO_CRYPTO_SYM_OP_CIPHER);
sym_create_session->u.cipher.para.algo = ctrl->header.algo;
sym_create_session->u.cipher.para.keylen = cpu_to_le32(keylen);
sym_create_session->u.cipher.para.op = cpu_to_le32(op);
The new style shows more obviously:
- the variable we want to operate.
- an assignment statement in a single line.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220506131627.180784-2-pizhenwei@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- Convert to the generic mmap support (ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT).
- Add support for outline-only KASAN with 64-bit Radix MMU (P9 or later).
- Increase SIGSTKSZ and MINSIGSTKSZ and add support for AT_MINSIGSTKSZ.
- Enable the DAWR (Data Address Watchpoint) on POWER9 DD2.3 or later.
- Drop support for system call instruction emulation.
- Many other small features and fixes.
Thanks to: Alexey Kardashevskiy, Alistair Popple, Andy Shevchenko, Bagas Sanjaya, Bjorn
Helgaas, Bo Liu, Chen Huang, Christophe Leroy, Colin Ian King, Daniel Axtens, Dwaipayan
Ray, Fabiano Rosas, Finn Thain, Frank Rowand, Fuqian Huang, Guilherme G. Piccoli, Hangyu
Hua, Haowen Bai, Haren Myneni, Hari Bathini, He Ying, Jason Wang, Jiapeng Chong, Jing
Yangyang, Joel Stanley, Julia Lawall, Kajol Jain, Kevin Hao, Krzysztof Kozlowski, Laurent
Dufour, Lv Ruyi, Madhavan Srinivasan, Magali Lemes, Miaoqian Lin, Minghao Chi, Nathan
Chancellor, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Oscar Salvador, Pali Rohár,
Paul Mackerras, Peng Wu, Qing Wang, Randy Dunlap, Reza Arbab, Russell Currey, Sohaib
Mohamed, Vaibhav Jain, Vasant Hegde, Wang Qing, Wang Wensheng, Xiang wangx, Xiaomeng Tong,
Xu Wang, Yang Guang, Yang Li, Ye Bin, YueHaibing, Yu Kuai, Zheng Bin, Zou Wei, Zucheng
Zheng.
-----BEGIN PGP SIGNATURE-----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=15oQ
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Convert to the generic mmap support (ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT)
- Add support for outline-only KASAN with 64-bit Radix MMU (P9 or later)
- Increase SIGSTKSZ and MINSIGSTKSZ and add support for AT_MINSIGSTKSZ
- Enable the DAWR (Data Address Watchpoint) on POWER9 DD2.3 or later
- Drop support for system call instruction emulation
- Many other small features and fixes
Thanks to Alexey Kardashevskiy, Alistair Popple, Andy Shevchenko, Bagas
Sanjaya, Bjorn Helgaas, Bo Liu, Chen Huang, Christophe Leroy, Colin Ian
King, Daniel Axtens, Dwaipayan Ray, Fabiano Rosas, Finn Thain, Frank
Rowand, Fuqian Huang, Guilherme G. Piccoli, Hangyu Hua, Haowen Bai,
Haren Myneni, Hari Bathini, He Ying, Jason Wang, Jiapeng Chong, Jing
Yangyang, Joel Stanley, Julia Lawall, Kajol Jain, Kevin Hao, Krzysztof
Kozlowski, Laurent Dufour, Lv Ruyi, Madhavan Srinivasan, Magali Lemes,
Miaoqian Lin, Minghao Chi, Nathan Chancellor, Naveen N. Rao, Nicholas
Piggin, Oliver O'Halloran, Oscar Salvador, Pali Rohár, Paul Mackerras,
Peng Wu, Qing Wang, Randy Dunlap, Reza Arbab, Russell Currey, Sohaib
Mohamed, Vaibhav Jain, Vasant Hegde, Wang Qing, Wang Wensheng, Xiang
wangx, Xiaomeng Tong, Xu Wang, Yang Guang, Yang Li, Ye Bin, YueHaibing,
Yu Kuai, Zheng Bin, Zou Wei, and Zucheng Zheng.
* tag 'powerpc-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (200 commits)
powerpc/64: Include cache.h directly in paca.h
powerpc/64s: Only set HAVE_ARCH_UNMAPPED_AREA when CONFIG_PPC_64S_HASH_MMU is set
powerpc/xics: Include missing header
powerpc/powernv/pci: Drop VF MPS fixup
powerpc/fsl_book3e: Don't set rodata RO too early
powerpc/microwatt: Add mmu bits to device tree
powerpc/powernv/flash: Check OPAL flash calls exist before using
powerpc/powermac: constify device_node in of_irq_parse_oldworld()
powerpc/powermac: add missing g5_phy_disable_cpu1() declaration
selftests/powerpc/pmu: fix spelling mistake "mis-match" -> "mismatch"
powerpc: Enable the DAWR on POWER9 DD2.3 and above
powerpc/64s: Add CPU_FTRS_POWER10 to ALWAYS mask
powerpc/64s: Add CPU_FTRS_POWER9_DD2_2 to CPU_FTRS_ALWAYS mask
powerpc: Fix all occurences of "the the"
selftests/powerpc/pmu/ebb: remove fixed_instruction.S
powerpc/platforms/83xx: Use of_device_get_match_data()
powerpc/eeh: Drop redundant spinlock initialization
powerpc/iommu: Add missing of_node_put in iommu_init_early_dart
powerpc/pseries/vas: Call misc_deregister if sysfs init fails
powerpc/papr_scm: Fix leaking nvdimm_events_map elements
...
API:
- Test in-place en/decryption with two sglists in testmgr.
- Fix process vs. softirq race in cryptd.
Algorithms:
- Add arm64 acceleration for sm4.
- Add s390 acceleration for chacha20.
Drivers:
- Add polarfire soc hwrng support in mpsf.
- Add support for TI SoC AM62x in sa2ul.
- Add support for ATSHA204 cryptochip in atmel-sha204a.
- Add support for PRNG in caam.
- Restore support for storage encryption in qat.
- Restore support for storage encryption in hisilicon/sec.
-----BEGIN PGP SIGNATURE-----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=oVRe
-----END PGP SIGNATURE-----
Merge tag 'v5.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Test in-place en/decryption with two sglists in testmgr
- Fix process vs softirq race in cryptd
Algorithms:
- Add arm64 acceleration for sm4
- Add s390 acceleration for chacha20
Drivers:
- Add polarfire soc hwrng support in mpsf
- Add support for TI SoC AM62x in sa2ul
- Add support for ATSHA204 cryptochip in atmel-sha204a
- Add support for PRNG in caam
- Restore support for storage encryption in qat
- Restore support for storage encryption in hisilicon/sec"
* tag 'v5.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits)
hwrng: omap3-rom - fix using wrong clk_disable() in omap_rom_rng_runtime_resume()
crypto: hisilicon/sec - delete the flag CRYPTO_ALG_ALLOCATES_MEMORY
crypto: qat - add support for 401xx devices
crypto: qat - re-enable registration of algorithms
crypto: qat - honor CRYPTO_TFM_REQ_MAY_SLEEP flag
crypto: qat - add param check for DH
crypto: qat - add param check for RSA
crypto: qat - remove dma_free_coherent() for DH
crypto: qat - remove dma_free_coherent() for RSA
crypto: qat - fix memory leak in RSA
crypto: qat - add backlog mechanism
crypto: qat - refactor submission logic
crypto: qat - use pre-allocated buffers in datapath
crypto: qat - set to zero DH parameters before free
crypto: s390 - add crypto library interface for ChaCha20
crypto: talitos - Uniform coding style with defined variable
crypto: octeontx2 - simplify the return expression of otx2_cpt_aead_cbc_aes_sha_setkey()
crypto: cryptd - Protect per-CPU resource by disabling BH.
crypto: sun8i-ce - do not fallback if cryptlen is less than sg length
crypto: sun8i-ce - rework debugging
...
The NXP Cryptographic Acceleration and Assurance Module (CAAM)
can be used to protect user-defined data across system reboot:
- When the system is fused and boots into secure state, the master
key is a unique never-disclosed device-specific key
- random key is encrypted by key derived from master key
- data is encrypted using the random key
- encrypted data and its encrypted random key are stored alongside
- This blob can now be safely stored in non-volatile memory
On next power-on:
- blob is loaded into CAAM
- CAAM writes decrypted data either into memory or key register
Add functions to realize encrypting and decrypting into memory alongside
the CAAM driver.
They will be used in a later commit as a source for the trusted key
seal/unseal mechanism.
Reviewed-by: David Gstir <david@sigma-star.at>
Reviewed-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Tested-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Tested-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Tested-by: Michael Walle <michael@walle.cc> # on ls1028a (non-E and E)
Tested-by: John Ernberg <john.ernberg@actia.se> # iMX8QXP
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Depending on SoC variant, a CAAM may be available, but with some futures
fused out. The LS1028A (non-E) SoC is one such SoC and while it
indicates BLOB support, BLOB operations will ultimately fail, because
there is no AES support. Add a new blob_present member to reflect
whether both BLOB support and the AES support it depends on is
available.
These will be used in a follow-up commit to allow blob driver
initialization to error out on SoCs without the necessary hardware
support instead of failing at runtime with a cryptic
caam_jr 8020000.jr: 20000b0f: CCB: desc idx 11: : Invalid CHA selected.
Co-developed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Michael Walle <michael@walle.cc>
Tested-by: Michael Walle <michael@walle.cc> # on ls1028a (non-E and E)
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
In init_winctx_regs(), __pa() is called on winctx->rx_fifo and this
function is called to initialize registers for receive and fault
windows. But the real address is passed in winctx->rx_fifo for
receive windows and the virtual address for fault windows which
causes errors with DEBUG_VIRTUAL enabled. Fixes this issue by
assigning only real address to rx_fifo in vas_rx_win_attr struct
for both receive and fault windows.
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/338e958c7ab8f3b266fa794a1f80f99b9671829e.camel@linux.ibm.com
Should not to uses the CRYPTO_ALG_ALLOCATES_MEMORY in SEC2. The SEC2
driver uses the pre-allocated buffers, including the src sgl pool, dst
sgl pool and other qp ctx resources. (e.g. IV buffer, mac buffer, key
buffer). The SEC2 driver doesn't allocate memory during request processing.
The driver only maps software sgl to allocated hardware sgl during I/O. So
here is fix it.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
QAT_401xx is a derivative of 4xxx. Add support for that device in the
qat_4xxx driver by including the DIDs (both PF and VF), extending the
probe and the firmware loader.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Srinivas Kerekare <srinivas.kerekare@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Re-enable the registration of algorithms after fixes to (1) use
pre-allocated buffers in the datapath and (2) support the
CRYPTO_TFM_REQ_MAY_BACKLOG flag.
This reverts commit 8893d27ffc.
Cc: stable@vger.kernel.org
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If a request has the flag CRYPTO_TFM_REQ_MAY_SLEEP set, allocate memory
using the flag GFP_KERNEL otherwise use GFP_ATOMIC.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reject requests with a source buffer that is bigger than the size of the
key. This is to prevent a possible integer underflow that might happen
when copying the source scatterlist into a linear buffer.
Cc: stable@vger.kernel.org
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reject requests with a source buffer that is bigger than the size of the
key. This is to prevent a possible integer underflow that might happen
when copying the source scatterlist into a linear buffer.
Cc: stable@vger.kernel.org
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The functions qat_dh_compute_value() allocates memory with
dma_alloc_coherent() if the source or the destination buffers are made
of multiple flat buffers or of a size that is not compatible with the
hardware.
This memory is then freed with dma_free_coherent() in the context of a
tasklet invoked to handle the response for the corresponding request.
According to Documentation/core-api/dma-api-howto.rst, the function
dma_free_coherent() cannot be called in an interrupt context.
Replace allocations with dma_alloc_coherent() in the function
qat_dh_compute_value() with kmalloc() + dma_map_single().
Cc: stable@vger.kernel.org
Fixes: c9839143eb ("crypto: qat - Add DH support")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
After commit f5ff79fddf ("dma-mapping: remove CONFIG_DMA_REMAP"), if
the algorithms are enabled, the driver crashes with a BUG_ON while
executing vunmap() in the context of a tasklet. This is due to the fact
that the function dma_free_coherent() cannot be called in an interrupt
context (see Documentation/core-api/dma-api-howto.rst).
The functions qat_rsa_enc() and qat_rsa_dec() allocate memory with
dma_alloc_coherent() if the source or the destination buffers are made
of multiple flat buffers or of a size that is not compatible with the
hardware.
This memory is then freed with dma_free_coherent() in the context of a
tasklet invoked to handle the response for the corresponding request.
Replace allocations with dma_alloc_coherent() in the functions
qat_rsa_enc() and qat_rsa_dec() with kmalloc() + dma_map_single().
Cc: stable@vger.kernel.org
Fixes: a990532023 ("crypto: qat - Add support for RSA algorithm")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When an RSA key represented in form 2 (as defined in PKCS #1 V2.1) is
used, some components of the private key persist even after the TFM is
released.
Replace the explicit calls to free the buffers in qat_rsa_exit_tfm()
with a call to qat_rsa_clear_ctx() which frees all buffers referenced in
the TFM context.
Cc: stable@vger.kernel.org
Fixes: 879f77e907 ("crypto: qat - Add RSA CRT mode")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The implementations of the crypto algorithms (aead, skcipher, etc) in
the QAT driver do not properly support requests with the
CRYPTO_TFM_REQ_MAY_BACKLOG flag set. If the HW queue is full, the driver
returns -EBUSY but does not enqueue the request. This can result in
applications like dm-crypt waiting indefinitely for the completion of a
request that was never submitted to the hardware.
Fix this by adding a software backlog queue: if the ring buffer is more
than eighty percent full, then the request is enqueued to a backlog
list and the error code -EBUSY is returned back to the caller.
Requests in the backlog queue are resubmitted at a later time, in the
context of the callback of a previously submitted request.
The request for which -EBUSY is returned is then marked as -EINPROGRESS
once submitted to the HW queues.
The submission loop inside the function qat_alg_send_message() has been
modified to decide which submission policy to use based on the request
flags. If the request does not have the CRYPTO_TFM_REQ_MAY_BACKLOG set,
the previous behaviour has been preserved.
Based on a patch by
Vishnu Das Ramachandran <vishnu.dasx.ramachandran@intel.com>
Cc: stable@vger.kernel.org
Fixes: d370cec321 ("crypto: qat - Intel(R) QAT crypto interface")
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Kyle Sanderson <kyle.leet@gmail.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
All the algorithms in qat_algs.c and qat_asym_algs.c use the same
pattern to submit messages to the HW queues. Move the submission loop
to a new function, qat_alg_send_message(), and share it between the
symmetric and the asymmetric algorithms.
As part of this rework, since the number of retries before returning an
error is inconsistent between the symmetric and asymmetric
implementations, set it to a value that works for both (i.e. 20, was 10
in qat_algs.c and 100 in qat_asym_algs.c)
In addition fix the return code reported when the HW queues are full.
In that case return -ENOSPC instead of -EBUSY.
Including stable in CC since (1) the error code returned if the HW queues
are full is incorrect and (2) to facilitate the backport of the next fix
"crypto: qat - add backlog mechanism".
Cc: stable@vger.kernel.org
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In order to do DMAs, the QAT device requires that the scatterlist
structures are mapped and translated into a format that the firmware can
understand. This is defined as the composition of a scatter gather list
(SGL) descriptor header, the struct qat_alg_buf_list, plus a variable
number of flat buffer descriptors, the struct qat_alg_buf.
The allocation and mapping of these data structures is done each time a
request is received from the skcipher and aead APIs.
In an OOM situation, this behaviour might lead to a dead-lock if an
allocation fails.
Based on the conversation in [1], increase the size of the aead and
skcipher request contexts to include an SGL descriptor that can handle
a maximum of 4 flat buffers.
If requests exceed 4 entries buffers, memory is allocated dynamically.
[1] https://lore.kernel.org/linux-crypto/20200722072932.GA27544@gondor.apana.org.au/
Cc: stable@vger.kernel.org
Fixes: d370cec321 ("crypto: qat - Intel(R) QAT crypto interface")
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Set to zero the context buffers containing the DH key before they are
freed.
This is a defense in depth measure that avoids keys to be recovered from
memory in case the system is compromised between the free of the buffer
and when that area of memory (containing keys) gets overwritten.
Cc: stable@vger.kernel.org
Fixes: c9839143eb ("crypto: qat - Add DH support")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Implement a crypto library interface for the s390-native ChaCha20 cipher
algorithm. This allows us to stop to select CRYPTO_CHACHA20 and instead
select CRYPTO_ARCH_HAVE_LIB_CHACHA. This allows BIG_KEYS=y not to build
a whole ChaCha20 crypto infrastructure as a built-in, but build a smaller
CRYPTO_LIB_CHACHA instead.
Make CRYPTO_CHACHA_S390 config entry to look like similar ones on other
architectures. Remove CRYPTO_ALGAPI select as anyway it is selected by
CRYPTO_SKCIPHER.
Add a new test module and a test script for ChaCha20 cipher and its
interfaces. Here are test results on an idle z15 machine:
Data | Generic crypto TFM | s390 crypto TFM | s390 lib
size | enc dec | enc dec | enc dec
-----+--------------------+------------------+----------------
512b | 1545ns 1295ns | 604ns 446ns | 430ns 407ns
4k | 9536ns 9463ns | 2329ns 2174ns | 2170ns 2154ns
64k | 149.6us 149.3us | 34.4us 34.5us | 33.9us 33.1us
6M | 23.61ms 23.11ms | 4223us 4160us | 3951us 4008us
60M | 143.9ms 143.9ms | 33.5ms 33.2ms | 32.2ms 32.1ms
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the defined variable "desc" to uniform coding style.
Signed-off-by: jianchunfu <jianchunfu@cmss.chinamobile.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The sg length could be more than remaining data on it.
So check the length requirement against the minimum between those two
values.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The "Fallback for xxx" message is annoying, remove it and store the
information in the debugfs.
Let's add more precise fallback stats and display it better.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When testing with some large SG list, the sun8i-ce drivers always
fallback even if it can handle it.
So use sg_nents_for_len() which permits to see less SGs than needed.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move all padding work to a dedicated function.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The sg length could be more than remaining data on it.
So check the length requirement against the minimum between those two
values.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Even if sun8i-ss does not handle hmac(sha1) directly, we can provide one
which use the already supported acceleration of sha1.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move all padding work to a dedicated function.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The "Fallback for xxx" message is annoying, remove it and store the
information in the debugfs.
In the same time, reports more fallback statistics.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The current sun8i-ss handle only requests with all SG length being
modulo 64.
But the last SG could be always handled by copying it on the pad buffer.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of memset all pad buffer, it is faster to only put 0 where
needed.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of allocate memory on each requests, it is easier to
pre-allocate buffers.
This made error path easier.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When testing with some large SG list, the sun8i-ss drivers always
fallback even if it can handle it.
So use sg_nents_for_len() which permits to see less SGs than needed.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The first thing we should do after dma_map_single() is to test the
result.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some fallback tests were redundant with what sun8i_ss_hash_need_fallback() already do.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
sun8i-ss does not handle well the possible zero sized sg.
Fixes: d9b45418a9 ("crypto: sun8i-ss - support hash algorithms")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
sun8i-ss fail handling IVs when doing decryption of multiple SGs in-place.
It should backup the last block of each SG source for using it later as
IVs.
In the same time remove allocation on requests path for storing all
IVs.
Fixes: f08fcced6d ("crypto: allwinner - Add sun8i-ss cryptographic offloader")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of allocate memory on each requests, it is easier to
pre-allocate buffer for backup IV.
This made error path easier.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of allocate memory on each requests, it is easier to
pre-allocate buffer for IV.
This made error path easier.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The commit referenced in the Fixes tag removed the 'break' from the else
branch in qcom_rng_read(), causing an infinite loop whenever 'max' is
not a multiple of WORD_SZ. This can be reproduced e.g. by running:
kcapi-rng -b 67 >/dev/null
There are many ways to fix this without adding back the 'break', but
they all seem more awkward than simply adding it back, so do just that.
Tested on a machine with Qualcomm Amberwing processor.
Fixes: a680b1832c ("crypto: qcom-rng - ensure buffer for generate is completely filled")
Cc: stable@vger.kernel.org
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When I refactored this Makefile, I accidentally changed the CONFIG
option.
Fixes: b52455a73d ("crypto: vmx - Align the short log with Makefile cleanups")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
I notieced the log is not properly aligned:
PERL drivers/crypto/vmx/aesp8-ppc.S
CC [M] fs/xfs/xfs_reflink.o
PERL drivers/crypto/vmx/ghashp8-ppc.S
CC [M] drivers/crypto/vmx/aes.o
Add some spaces after 'PERL'.
While I was here, I cleaned up the Makefile:
- Merge the two similar rules
- Remove redundant 'clean-files' (Having 'targets' is enough)
- Move the flavour into the build command
This still avoids the build failures fixed by commit 4ee812f614
("crypto: vmx - Avoid weird build failures").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Flushing system-wide workqueues is dangerous and will be forbidden.
Replace system_wq with local atmel_wq.
If CONFIG_CRYPTO_DEV_ATMEL_{I2C,ECC,SHA204A}=y, the ordering in Makefile
guarantees that module_init() for atmel-i2c runs before module_init()
for atmel-ecc and atmel-sha204a runs.
Link: https://lkml.kernel.org/r/49925af7-78a8-a3dd-bce6-cfc02e1a9236@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is no semantical change introduced by this change.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for random number generation using PRNG
mode of CAAM and expose the interface through crypto API.
According to the RM, the HW implementation of the DRBG follows
NIST SP 800-90A specification for DRBG_Hash SHA-256 function
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Horia Geant <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Returning an error value in an i2c remove callback results in an error
message being emitted by the i2c core, but otherwise it doesn't make a
difference. The device goes away anyhow and the devm cleanups are
called.
As atmel_sha204a_remove already emits an error message ant the additional
error message by the i2c core doesn't add any useful information, change
the return value to zero to suppress this error message.
Note that after atmel_sha204a_remove() returns *i2c_priv is freed, so there
is trouble ahead because atmel_sha204a_rng_done() might be called after
that freeing. So make the error message a bit more frightening.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
