Pull input updates from Dmitry Torokhov:
- new driver for PhoenixRC Flight Controller Adapter
- new driver for RAVE SP Power button
- fixes for autosuspend-related deadlocks in a few unput USB dirvers
- support for 2nd wheel in ATech PS/2 mouse
- fix for ALPS trackpoint detection on Thinkpad L570 and Latitude 7370
- bunch of cleanups in various in PS/2 protocols
- other assorted changes and fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (35 commits)
Input: i8042 - enable MUX on Sony VAIO VGN-CS series to fix touchpad
Input: stmfts, s6sy761 - update my e-mail
Input: stmfts - use async probe & suspend/resume to avoid 2s delay
Input: ALPS - fix TrackStick detection on Thinkpad L570 and Latitude 7370
Input: xpad - add PDP device id 0x02a4
Input: alps - report pressure of v3 and v7 trackstick
Input: pxrc - new driver for PhoenixRC Flight Controller Adapter
Input: usbtouchscreen - do not rely on input_dev->users
Input: usbtouchscreen - fix deadlock in autosuspend
Input: pegasus_notetaker - do not rely on input_dev->users
Input: pagasus_notetaker - fix deadlock in autosuspend
Input: synaptics_usb - do not rely on input_dev->users
Input: synaptics_usb - fix deadlock in autosuspend
Input: gpio-keys - add support for wakeup event action
Input: appletouch - use true and false for boolean values
Input: silead - add Chuwi Hi8 support
Input: analog - use get_cycles() on PPC
Input: stmpe-keypad - remove VLA usage
Input: i8042 - add Lenovo ThinkPad L460 to i8042 reset list
Input: add RAVE SP Powerbutton driver
...
This driver let you plug in your RC controller to the adapter and
use it as input device in various RC simulators.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Bits for M, R and L buttons are already processed in alps. Other newly
documented bits not yet.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Pull input layer updates from Dmitry Torokhov:
- evdev interface has been adjusted to extend the life of timestamps on
32 bit systems to the year of 2108
- Synaptics RMI4 driver's PS/2 guest handling ha beed updated to
improve chances of detecting trackpoints on the pass-through port
- mms114 touchcsreen controller driver has been updated to support
generic device properties and work with mms152 cntrollers
- Goodix driver now supports generic touchscreen properties
- couple of drivers for AVR32 architecture are gone as the architecture
support has been removed from the kernel
- gpio-tilt driver has been removed as there are no mainline users and
the driver itself is using legacy APIs and relies on platform data
- MODULE_LINECSE/MODULE_VERSION cleanups
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits)
Input: goodix - use generic touchscreen_properties
Input: mms114 - fix typo in definition
Input: mms114 - use BIT() macro instead of explicit shifting
Input: mms114 - replace mdelay with msleep
Input: mms114 - add support for mms152
Input: mms114 - drop platform data and use generic APIs
Input: mms114 - mark as direct input device
Input: mms114 - do not clobber interrupt trigger
Input: edt-ft5x06 - fix error handling for factory mode on non-M06
Input: stmfts - set IRQ_NOAUTOEN to the irq flag
Input: auo-pixcir-ts - delete an unnecessary return statement
Input: auo-pixcir-ts - remove custom log for a failed memory allocation
Input: da9052_tsi - remove unused mutex
Input: docs - use PROPERTY_ENTRY_U32() directly
Input: synaptics-rmi4 - log when we create a guest serio port
Input: synaptics-rmi4 - unmask F03 interrupts when port is opened
Input: synaptics-rmi4 - do not delete interrupt memory too early
Input: ad7877 - use managed resource allocations
Input: stmfts,s6sy671 - add SPDX identifier
Input: remove atmel-wm97xx touchscreen driver
...
Instead of using PROPERTY_ENTRY_INTEGER() with explicitly supplied type,
use PROPERTY_ENTRY_U32() dedicated macro.
It will help modify internals of built-in device properties API.
No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fix small typos in the Instructions and Uploading sections. Fix a typo in
the start/stop effect example usage code.
Signed-off-by: Jean-François Têtu <jean-francois.tetu@savoirfairelinux.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This driver was merged in 2011 as a tool for detecting the orientation
of a screen. The device driver assumes board file setup using the
platform data from <linux/input/gpio_tilt.h>. But no boards in the
kernel tree defines this platform data.
As I am faced with refactoring drivers to use GPIO descriptors and
pass decriptor tables from boards, or use the device tree device
drivers like these creates a serious problem: I cannot fix them and
cannot test them, not even compile-test them with a system actually
using it (no in-tree boardfile).
I suggest to delete this driver and rewrite it using device tree if
it is still in use on actively maintained systems.
I can also offer to rewrite it out of the blue using device tree if
someone promise to test it and help me iterate it.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Patchwork-Id: 10133609
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The current hid-multitouch driver only allow the report of two
orientations, vertical and horizontal. We use the Azimuth orientation
usage 0x3F under the Digitizer usage page to report orientation if the
device supports it.
Changelog:
v1 -> v2:
- Fix commit message.
- Remove resolution reporting for ABS_MT_ORIENTATION.
v2 -> v3:
- Fix commit message.
v3 -> v4:
- Fix ABS_MT_ORIENTATION ABS param range.
- Don't set ABS_MT_ORIENTATION in ABS_DG_HEIGHT when it is already
set by ABS_DG_AZIMUTH.
v4 -> v5:
- Improve multi-touch-protocol.rst documentation.
Signed-off-by: Wei-Ning Huang <wnhuang@chromium.org>
Signed-off-by: Wei-Ning Huang <wnhuang@google.com>
Reviewed-by: Dmitry Torokhov <dtor@chromium.org>
Reviewed-by: Henrik Rydberg <rydberg@bitmath.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
removal of kernel/rcu/srcu.c. Also correct a stray pointer in
memory-barriers.txt.
-----BEGIN PGP SIGNATURE-----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=JEoA
-----END PGP SIGNATURE-----
Merge tag '4.13-fixes' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"A set of fixes for various warnings, including the one caused by the
removal of kernel/rcu/srcu.c. Also correct a stray pointer in
memory-barriers.txt"
* tag '4.13-fixes' of git://git.lwn.net/linux:
kokr/memory-barriers.txt: Fix obsolete link to atomic_ops.txt
memory-barriers.txt: Fix broken link to atomic_ops.txt
docs: Turn off section numbering for the input docs
docs: Include uaccess docs from the right file
docs: Do not include from kernel/rcu/srcu.c
The input docs enable section numbering at multiple levels, leading to a
lot of bright-red "nested numbered toctree" warnings in newer Sphinx
versions. Just take that directive out for now to help alleviate the
global red-pixel shortage.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Pull input layer fixes from Dmitry Torokhov:
"Just a few fixups to a couple of drivers"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: elan_i2c - ignore signals when finishing updating firmware
Input: elan_i2c - clear INT before resetting controller
Input: atmel_mxt_ts - add T100 as a readable object
Input: edt-ft5x06 - increase allowed data range for threshold parameter
The datasheet and application note does not mention an allowed range for
the M09_REGISTER_THRESHOLD parameter. One of our customers needs to set
lower values than 20 and they seem to work just fine on EDT EP0xx0M09 with
T5x06 touch.
So, lacking a known lower limit, we increase the range for thresholds,
and set the lower limit to 0. The documentation is updated accordingly.
Signed-off-by: Schoefegger Stefan <stefan.schoefegger@ginzinger.com>
Signed-off-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com>
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The input subsystem documentation got converted into ReST.
Add it to the main documentation index and use kernel-figure
for the two svg images there.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Pull input subsystem updates from Dmitry Torokhov:
- a big update from Mauro converting input documentation to ReST format
- Synaptics PS/2 is now aware of SMBus companion devices, which means
that we can now use native RMI4 protocol to handle touchpads, instead
of relying on legacy PS/2 mode.
- we removed support from BMA180 accelerometer from input devices as it
is now handled properly by IIO
- update to TSC2007 to corretcly report pressure
- other miscellaneous driver fixes.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (152 commits)
Input: ar1021_i2c - use BIT to check for a bit
Input: twl4030-pwrbutton - use input_set_capability() helper
Input: twl4030-pwrbutton - use correct device for irq request
Input: ar1021_i2c - enable touch mode during open
Input: add uinput documentation
dt-bindings: input: add bindings document for ar1021_i2c driver
dt-bindings: input: rotary-encoder: fix typo
Input: xen-kbdfront - add module parameter for setting resolution
ARM: pxa/raumfeld: fix compile error in rotary controller resources
Input: xpad - do not suggest writing to Dominic
Input: xpad - don't use literal blocks inside footnotes
Input: xpad - note that usb/devices is now at /sys/kernel/debug/
Input: docs - freshen up introduction
Input: docs - split input docs into kernel- and user-facing
Input: docs - note that MT-A protocol is obsolete
Input: docs - update joystick documentation a bit
Input: docs - remove disclaimer/GPL notice
Input: fix "Game console" heading level in joystick documentation
Input: rotary-encoder - remove references to platform data from docs
Input: move documentation for Amiga CD32
...
Pull HID subsystem updates from Jiri Kosina:
- The need for HID_QUIRK_NO_INIT_REPORTS per-device quirk has been
growing dramatically during past years, so the time has come to
switch over the default, and perform the pro-active reading only in
cases where it's really needed (multitouch, wacom).
The only place where this behavior is (in some form) preserved is
hiddev so that we don't introduce userspace-visible change of
behavior.
From Benjamin Tissoires
- HID++ support for power_supply / baterry reporting.
From Benjamin Tissoires and Bastien Nocera
- Vast improvements / rework of DS3 and DS4 in Sony driver.
From Roderick Colenbrander
- Improvment (in terms of getting closer to the Microsoft's
interpretation of slightly ambiguous specification) of logical range
interpretation in case null-state is set in the rdesc.
From Valtteri Heikkilä and Tomasz Kramkowski
- A lot of newly supported device IDs and small assorted fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (71 commits)
HID: usbhid: Add HID_QUIRK_NOGET for Aten CS-1758 KVM switch
HID: asus: support backlight on USB keyboards
HID: wacom: Move wacom_remote_irq and wacom_remote_status_irq
HID: wacom: generic: sync pad events only for actual packets
HID: sony: remove redundant check for -ve err
HID: sony: Make sure to unregister sensors on failure
HID: sony: Make DS4 bt poll interval adjustable
HID: sony: Set proper bit flags on DS4 output report
HID: sony: DS4 use brighter LED colors
HID: sony: Improve navigation controller axis/button mapping
HID: sony: Use DS3 MAC address as unique identifier on USB
HID: logitech-hidpp: add a sysfs file to tell we support power_supply
HID: logitech-hidpp: enable HID++ 1.0 battery reporting
HID: logitech-hidpp: add support for battery status for the K750
HID: logitech-hidpp: battery: provide CAPACITY_LEVEL
HID: logitech-hidpp: rename battery level into capacity
HID: logitech-hidpp: battery: provide ONLINE property
HID: logitech-hidpp: notify battery on connect
HID: logitech-hidpp: return an error if the queried feature is not present
HID: logitech-hidpp: create the battery for all types of HID++ devices
...
Add description of uinput module with a few examples.
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Do not recommend people write to Dominic, rather everyone should be using
linux-input mailing list.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Unfortunately, Sphinx (or LaTeX) can't handle literal blocks inside
footnotes. So, just use normal text for the two literal code-blocks that
documents the output of /sys/kernel/debug/usb/devices for xpad devices.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The /proc/bus/usb/devices got moved to sysfs. It is now sitting at:
/sys/kernel/debug/usb/devices
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Stop saying that API is experimental and that only USB is supported,
acknowledge that evdev is the preferred interface, and remove paragraph
encouraging people sending snail mail to Vojtech :) along with his email.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Split input documentation into several groups: kernel- and user-facing, and
notes about individual device drivers. Move device drivers docs into a
separate subdirectory.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Consolidate use instructions and userspace API notes into the same chapter;
remove completely obsolete references, move into a separate subdirectory.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver has been converted to use generic device properties, so
stop referring to platform data.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Now that the images got converted to svg, add them at the
ff.rst file.
NOTE: After merging upstream, the "figure" tag should be
replaced by the new "kernel-figure" tag, in order for the
SVG images to be included at the PDF files.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We're using svg as the standard format for vectorial images.
Convert it to .svg, in a way that it is easily editable.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We're using svg as the standard format for vectorial images.
Convert shape.fig to .svg, in a way that it is easily editable.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Now that all files under Documentation/input follows the ReST markup
language, rename them to *.rst and create a book for the Linux Input
subsystem.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This file require minimum adjustments to be a valid ReST file.
Do it, in order to be able to parse it with Sphinx.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This file require minimum adjustments to be a valid ReST file.
Do it, in order to be able to parse it with Sphinx.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This file require minimum adjustments to be a valid ReST file.
Do it, in order to be able to parse it with Sphinx.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This file require minimum adjustments to be a valid ReST file.
Do it, in order to be able to parse it with Sphinx.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This file has its own particular format that doesn't match any
markup one.
Manually change it to get something that would be readable
using ReST markup language.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This file require minimum adjustments to be a valid ReST file.
Do it, in order to be able to parse it with Sphinx.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This file require minimum adjustments to be a valid ReST file.
Do it, in order to be able to parse it with Sphinx.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This file require minimum adjustments to be a valid ReST file.
Do it, in order to be able to parse it with Sphinx.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This file require minimum adjustments to be a valid ReST file.
Do it, in order to be able to parse it with Sphinx
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This file require minimum adjustments to be a valid ReST file.
Do it, in order to be able to parse it with Sphinx.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This file require minimum adjustments to be a valid ReST file.
Do it, in order to be able to parse it with Sphinx.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This file require some adjustments to be a valid ReST file.
Do it, in order to be able to parse it with Sphinx.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This file require minimum adjustments to be a valid ReST file.
Do it, in order to be able to parse it with Sphinx.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This file seems to be using some other markup language, (maybe mediawiki?).
Manually convert it to ReST markup, with is the one we're using along the
Kernel documentaiton.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This file require minimum adjustments to be a valid ReST file.
Do it, in order to be able to parse it with Sphinx.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
