Commit 399516ab0f ("MAINTAINERS: Add a bunch of legacy (UMS) DRM drivers")
marked mga driver obsolete 7 years ago.
And the mesa UMD of this drm driver already in deprecated list
in the link: https://docs.mesa3d.org/systems.html
Matrox-->driver/gpu/drm/mga
It's time to remove this driver.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221203102502.3185-3-cai.huoqing@linux.dev
Commit 399516ab0f ("MAINTAINERS: Add a bunch of legacy (UMS) DRM drivers")
marked i810 driver obsolete 7 years ago.
And the mesa UMD of this drm driver already in deprecated list
in the link: https://docs.mesa3d.org/systems.html
Intel i810-->driver/gpu/drm/i810
It's time to remove this driver.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221203102502.3185-2-cai.huoqing@linux.dev
The documentation for struct drm_minor already states this, but that's
not always that easy to find.
Also due to historical reasons we still have the minor-centric
interfaces (like drm_debugfs_create_files), but since this is now
getting fixed we can put a few more pointers in place as to how this
should be done ideally. Note that debugfs isn't there yet for all
cases (debugfs files on kms objects like crtc/connector aren't
supported, neither debugfs files with full fops), so the debugfs side
of this is still rather aspirational and more for new users than
converting everything existing. todo.rst covers the additional work
needed already.
Motivated by some discussion with Rodrigo on irc about how drm/xe
should lay out its sysfs interfaces.
v2: Make the debugfs situation clearer in the commit message, but
don't elaborate more in the actual kerneldoc to avoid distracting from
the main message around sysfs (Jani)
Also fix some typos.
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Wambui Karuga <wambui.karugax@gmail.com>
Cc: Maíra Canal <mcanal@igalia.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Melissa Wen <mwen@igalia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230109164604.3860862-1-daniel.vetter@ffwll.ch
There is a macro for this already in the <drm/drm_mipi_dsi.h> header, use
that instead and delete the custom DSI write macro defined in the driver.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230107191822.3787147-12-javierm@redhat.com
There are macros for these already in the <drm/drm_mipi_dsi.h> header, use
that instead and delete the custom DSI write macros defined in the driver.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230107191822.3787147-3-javierm@redhat.com
Add an eDP panel entry for IVO M133NW4J.
Due to lack of documentation, use the delay_200_500_p2e100 timings like
some other IVO entries for now.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221231142721.338643-2-abel.vesa@linaro.org
The actual name is R133NW4K-R0.
Fixes: 0f9fa5f58c ("drm/panel-edp: add IVO M133NW4J-R3 panel entry")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221231142721.338643-1-abel.vesa@linaro.org
dcss_drv_platform_remove() is only called for a device after
dcss_drv_platform_probe() returned 0. In that case dev_set_drvdata() was
called with a non-NULL value and so dev_get_drvdata() won't return NULL.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221230130025.240776-1-u.kleine-koenig@pengutronix.de
The structs drm_debugfs_info and drm_debugfs_entry don't have
descriptions for their parameters, which is causing the following warnings:
include/drm/drm_debugfs.h:93: warning: Function parameter or member
'name' not described in 'drm_debugfs_info'
include/drm/drm_debugfs.h:93: warning: Function parameter or member
'show' not described in 'drm_debugfs_info'
include/drm/drm_debugfs.h:93: warning: Function parameter or member
'driver_features' not described in 'drm_debugfs_info'
include/drm/drm_debugfs.h:93: warning: Function parameter or member
'data' not described in 'drm_debugfs_info'
include/drm/drm_debugfs.h:105: warning: Function parameter or member
'dev' not described in 'drm_debugfs_entry'
include/drm/drm_debugfs.h:105: warning: Function parameter or member
'file' not described in 'drm_debugfs_entry'
include/drm/drm_debugfs.h:105: warning: Function parameter or member
'list' not described in 'drm_debugfs_entry'
Therefore, fix the warnings by adding descriptions to all struct
parameters.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230105193039.287677-2-mcanal@igalia.com
Currently, debugfs functions are using symbolic macros as permission
bits, but checkpatch reinforces permission bits in the octal form, as
they are more readable and easier to understand [1]. Moreover, using
the symbolic macro S_IFREG is redundant.
Therefore, use octal permission bits in all debugfs functions.
[1] https://docs.kernel.org/dev-tools/checkpatch.html#permissions
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230105193039.287677-1-mcanal@igalia.com
The driver is for panels based on the Himax HX8394 controller, such as the
HannStar HSD060BHW4 720x1440 TFT LCD panel that uses a MIPI-DSI interface.
Signed-off-by: Kamil Trzciński <ayufan@ayufan.eu>
Co-developed-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Co-developed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Tom Fitzhenry <tom@tom-fitzhenry.me.uk>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230102230733.3506624-3-javierm@redhat.com
Add device tree bindings for panels based on the Himax HX8394 controller,
such as the HannStar HSD060BHW4 720x1440 TFT LCD panel that is connected
through a MIPI-DSI video interface.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230102230733.3506624-2-javierm@redhat.com
The code 'b' is used for dma-buf IOCTLs.
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Christian König <christian.koenig@amd.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221128133853.355645-1-contact@emersion.fr
The listed address doesn't work any more:
puck.chen@hisilicon.com
host mx5.hisilicon.com [124.71.93.234]
SMTP error from remote mail server after RCPT TO:<puck.chen@hisilicon.com>:
551 5.1.1 <puck.chen@hisilicon.com>: Recipient address rejected:
Failed recipient validation check.: host 127.0.0.1[127.0.0.1] said:
554 5.7.1 recipient verify from ldap failed (in reply to RCPT TO command)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219085307.1403247-1-u.kleine-koenig@pengutronix.de
While working on a drm driver that doesn't need the i2c algobit stuff I
noticed that DRM selects this code even though only 8 drivers actually use
it. While also only some drivers use i2c, keep the select for I2C for the
next cleanup patch. Still prepare this already by also selecting I2C for
the individual drivers.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219083627.1401627-1-u.kleine-koenig@pengutronix.de
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118224540.619276-44-uwe@kleine-koenig.org
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118224540.619276-43-uwe@kleine-koenig.org
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118224540.619276-42-uwe@kleine-koenig.org
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118224540.619276-41-uwe@kleine-koenig.org
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118224540.619276-40-uwe@kleine-koenig.org
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118224540.619276-39-uwe@kleine-koenig.org
Ignoring errors from devm_clk_get() is wrong. To handle not all platforms
having an axi clk use devm_clk_get_optional() instead and do proper error
handling.
Also the clk API handles NULL as a dummy clk (which is also returned by
devm_clk_get_optional() if there is no clk) so there is no need to check
for NULL before calling clk_prepare_enable() or its counter part.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200720153254.18071-1-u.kleine-koenig@pengutronix.de
devm_regulator_get_enable_optional() function returns 0 on success, so
use it for the check if function succeeded instead of the -ENODEV value.
Fixes: 429e870636 ("drm/meson: dw-hdmi: Use devm_regulator_*get_enable*()")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
[narmstrong: s/succeeded/succeeded/ in commit message]
Link: https://patchwork.freedesktop.org/patch/msgid/20230109220033.31202-1-m.szyprowski@samsung.com
Add support for the 1080x2400 Visionox VTDR6130 AMOLED DSI panel
found on the Qualcomm SM8550 MTP board.
By default the the panel is configured to work with DSI compressed
streams, but can work in uncompressed video mode since 1080x2400 in
RGB888 fits in the 4 DSI lanes bandwidth.
While display compression is preferred for performance and power
reasons, let's start with the uncompressed video mode support and
add the DSC support later on.
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
[narmstrong: moved drm/display/ include file before drm/drm_]
Link: https://patchwork.freedesktop.org/patch/msgid/20230103-topic-sm8550-upstream-vtdr6130-panel-v2-2-dd6200f47a76@linaro.org
The back porch timings were correct, only the sync offset was wrong.
Correct timing is now reported for 1080i and 576i, but the h offset is
incorrect for 480i for non-obvious reasons.
Fixes: fb10dc451c ("drm/vc4: hdmi: Correct HDMI timing registers for interlaced modes")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-14-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
This commit fixes vertical timings of the VEC (composite output) modes
to accurately represent the 525-line ("NTSC") and 625-line ("PAL") ITU-R
standards.
Previous timings were actually defined as 502 and 601 lines, resulting
in non-standard 62.69 Hz and 52 Hz signals being generated,
respectively.
Changes to vc4_crtc.c have also been made, to make the PixelValve
vertical timings accurately correspond to the DRM modeline in interlaced
modes. The resulting VERTA/VERTB register values have been verified
against the reference values set by the Raspberry Pi firmware.
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-13-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The hardware supports the 332 8bpp and 4:4:4:4 16bpp formats,
but the table of supported formats didn't include them.
Add them in.
In theory they are supported for T-format as well as linear,
but without a way to test them just add them as linear for now.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-11-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
pixel_order is used for the earlier versions of the HVS, so is
redundant on the 10:10:10:2 and 10bit YUV formats that are only
supported on HVS5.
Remove the assignment from the table to avoid confusion.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-10-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
