KVM_CAP_XSAVE2 is out of sync due to a conflict. Copy the whole
file while at it.
Reported-by: Yang Zhong <yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
amx_test's binary should be present in the .gitignore file for the git
to ignore it.
Fixes: bf70636d94 ("selftest: kvm: Add amx selftest")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Message-Id: <20220118122053.1941915-1-usama.anjum@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a VMX specific test to verify that KVM doesn't explode if userspace
attempts KVM_RUN when emulation is required with a pending exception.
KVM VMX's emulation support for !unrestricted_guest punts exceptions to
userspace instead of attempting to synthesize the exception with all the
correct state (and stack switching, etc...).
Punting is acceptable as there's never been a request to support
injecting exceptions when emulating due to invalid state, but KVM has
historically assumed that userspace will do the right thing and either
clear the exception or kill the guest. Deliberately do the opposite and
attempt to re-enter the guest with a pending exception and emulation
required to verify KVM continues to punt the combination to userspace,
e.g. doesn't explode, WARN, etc...
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211228232437.1875318-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Verify that the PMU event filter works as expected.
Note that the virtual PMU doesn't work as expected on AMD Zen CPUs (an
intercepted rdmsr is counted as a retired branch instruction), but the
PMU event filter does work.
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220115052431.447232-7-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extract the x86 model number from CPUID.01H:EAX.
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220115052431.447232-6-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move this static inline function to processor.h, so that it can be
used in individual tests, as needed.
Opportunistically replace the bare 'unsigned' with 'unsigned int.'
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220115052431.447232-5-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the one ad hoc "AuthenticAMD" CPUID vendor string comparison
with a new function, is_amd_cpu().
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220115052431.447232-4-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Refactor is_intel_cpu() to make it easier to reuse the bulk of the
code for other vendors in the future.
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220115052431.447232-3-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vm_xsave_req_perm() is currently defined and used by x86_64 only.
Make it compiled into vm_create_with_vcpus() only when on x86_64
machines. Otherwise, it would cause linkage errors, e.g. on s390x.
Fixes: 415a3c33e8 ("kvm: selftests: Add support for KVM_CAP_XSAVE2")
Reported-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Tested-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Message-Id: <20220118014817.30910-1-wei.w.wang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM forbids KVM_SET_CPUID2 after KVM_RUN was performed on a vCPU unless
the supplied CPUID data is equal to what was previously set. Test this.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220117150542.2176196-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation to reusing the existing 'get_cpuid_test' for testing
"KVM_SET_CPUID{,2} after KVM_RUN" rename it to 'cpuid_test' to avoid
the confusion.
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220117150542.2176196-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This selftest covers two aspects of AMX. The first is triggering #NM
exception and checking the MSR XFD_ERR value. The second case is
loading tile config and tile data into guest registers and trapping to
the host side for a complete save/load of the guest state. TMM0
is also checked against memory data after save/restore.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20211223145322.2914028-4-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Those changes can avoid dereferencing pointer compile issue
when amx_test.c reference state->xsave.
Move struct kvm_x86_state definition to processor.h.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20211223145322.2914028-3-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For AMX support it is recommended to load XCR0 after XFD, so
that KVM does not see XFD=0, XCR=1 for a save state that will
eventually be disabled (which would lead to premature allocation
of the space required for that save state).
It is also required to load XSAVE data after XCR0 and XFD, so
that KVM can trigger allocation of the extra space required to
store AMX state.
Adjust vcpu_load_state to obey these new requirements.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20211223145322.2914028-2-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When KVM_CAP_XSAVE2 is supported, userspace is expected to allocate
buffer for KVM_GET_XSAVE2 and KVM_SET_XSAVE using the size returned
by KVM_CHECK_EXTENSION(KVM_CAP_XSAVE2).
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Signed-off-by: Guang Zeng <guang.zeng@intel.com>
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220105123532.12586-20-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Revert "libtraceevent: Increase libtraceevent logging when verbose", breaks the build
with libtraceevent-1.3.0, i.e. when building with 'LIBTRACEEVENT_DYNAMIC=1'.
- Avoid early exit in 'perf trace' due to running SIGCHLD handler before it
makes sense to. It can happen when using a BPF source code event that have
to be first built into an object file.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYdrrXQAKCRCyPKLppCJ+
J1KLAPwKLu7Mxj5sc0EMB3WJr48PUTaAzNt9GYhfxuok3x6bBgEAvXQL5olib/0A
9sLhZrKVHqeQKApgFtkzOVT6DoNVwwg=
=0r49
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.16-2022-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Revert "libtraceevent: Increase libtraceevent logging when verbose",
breaks the build with libtraceevent-1.3.0, i.e. when building with
'LIBTRACEEVENT_DYNAMIC=1'.
- Avoid early exit in 'perf trace' due to running SIGCHLD handler
before it makes sense to. It can happen when using a BPF source code
event that have to be first built into an object file.
* tag 'perf-tools-fixes-for-v5.16-2022-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
Revert "libtraceevent: Increase libtraceevent logging when verbose"
perf trace: Avoid early exit due to running SIGCHLD handler before it makes sense to
This reverts commit 08efcb4a63.
This breaks the build as it will prefer using libbpf-devel header files,
even when not using LIBBPF_DYNAMIC=1, breaking the build.
This was detected on OpenSuSE Tumbleweed with libtraceevent-devel 1.3.0,
as described by Jiri Slaby:
=======================================================================
It breaks build with LIBTRACEEVENT_DYNAMIC and version 1.3.0:
> util/debug.c: In function ‘perf_debug_option’:
> util/debug.c:243:17: error: implicit declaration of function
‘tep_set_loglevel’ [-Werror=implicit-function-declaration]
> 243 | tep_set_loglevel(TEP_LOG_INFO);
> | ^~~~~~~~~~~~~~~~
> util/debug.c:243:34: error: ‘TEP_LOG_INFO’ undeclared (first use in this
function); did you mean ‘TEP_PRINT_INFO’?
> 243 | tep_set_loglevel(TEP_LOG_INFO);
> | ^~~~~~~~~~~~
> | TEP_PRINT_INFO
> util/debug.c:243:34: note: each undeclared identifier is reported only once
for each function it appears in
> util/debug.c:245:34: error: ‘TEP_LOG_DEBUG’ undeclared (first use in this
function)
> 245 | tep_set_loglevel(TEP_LOG_DEBUG);
> | ^~~~~~~~~~~~~
> util/debug.c:247:34: error: ‘TEP_LOG_ALL’ undeclared (first use in this
function)
> 247 | tep_set_loglevel(TEP_LOG_ALL);
> | ^~~~~~~~~~~
It is because the gcc's command line looks like:
gcc
...
-I/home/abuild/rpmbuild/BUILD/tools/lib/
...
-DLIBTRACEEVENT_VERSION=65790
...
=======================================================================
The proper way to fix this is more involved and so not suitable for this
late in the 5.16-rc stage.
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/lkml/bc2b0786-8965-1bcd-2316-9d9bb37b9c31@kernel.org
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: https://lore.kernel.org/lkml/YddGjjmlMZzxUZbN@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When running 'perf trace' with an BPF object like:
# perf trace -e openat,tools/perf/examples/bpf/hello.c
the event parsing eventually calls llvm__get_kbuild_opts() that runs a
script and that ends up with SIGCHLD delivered to the 'perf trace'
handler, which assumes the workload process is done and quits 'perf
trace'.
Move the SIGCHLD handler setup directly to trace__run(), where the event
is parsed and the object is already compiled.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Christy Lee <christyc.y.lee@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220106222030.227499-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that core kvm_util declarations have special home in
kvm_util_base.h, move ucall-related declarations out into a separate
header.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-Id: <20211210164620.11636-3-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Between helper macros and interfaces that will be introduced in
subsequent patches, much of kvm_util.h would end up being declarations
specific to ucall. Ideally these could be separated out into a separate
header since they are not strictly required for writing guest tests and
are mostly self-contained interfaces other than a reliance on a few
core declarations like struct kvm_vm. This doesn't make a big
difference as far as how tests will be compiled/written since all these
interfaces will still be packaged up into a single/common libkvm.a used
by all tests, but it is still nice to be able to compartmentalize to
improve readabilty and reduce merge conflicts in the future for common
tasks like adding new interfaces to kvm_util.h.
Furthermore, some of the ucall declarations will be arch-specific,
requiring various #ifdef'ery in kvm_util.h. Ideally these declarations
could live in separate arch-specific headers, e.g.
include/<arch>/ucall.h, which would handle arch-specific declarations
as well as pulling in common ucall-related declarations shared by all
archs.
One simple way to do this would be to #include ucall.h at the bottom of
kvm_util.h, after declarations it relies upon like struct kvm_vm.
This is brittle however, and doesn't scale easily to other sets of
interfaces that may be added in the future.
Instead, move all declarations currently in kvm_util.h into
kvm_util_base.h, then have kvm_util.h #include it. With this change,
non-base declarations can be selectively moved/introduced into separate
headers, which can then be included in kvm_util.h so that individual
tests don't need to be touched. Subsequent patches will then move
ucall-related declarations into a separate header to meet the above
goals.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-Id: <20211210164620.11636-2-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This adds basic support for delivering 2 level event channels to a guest.
Initially, it only supports delivery via the IRQ routing table, triggered
by an eventfd. In order to do so, it has a kvm_xen_set_evtchn_fast()
function which will use the pre-mapped shared_info page if it already
exists and is still valid, while the slow path through the irqfd_inject
workqueue will remap the shared_info page if necessary.
It sets the bits in the shared_info page but not the vcpu_info; that is
deferred to __kvm_xen_has_interrupt() which raises the vector to the
appropriate vCPU.
Add a 'verbose' mode to xen_shinfo_test while adding test cases for this.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211210163625.2886-5-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add tests to confirm mirror vms can only run correct subset of commands.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Marc Orr <marcorr@google.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Message-Id: <20211208191642.3792819-4-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TEST_ASSERT in SEV ioctl was allowing errors because it checked return
value was good OR the FW error code was OK. This TEST_ASSERT should
require both (aka. AND) values are OK. Removes the LAUNCH_START from the
mirror VM because this call correctly fails because mirror VMs cannot
call this command. Currently issues with the PSP driver functions mean
the firmware error is not always reset to SEV_RET_SUCCESS when a call is
successful. Mainly sev_platform_init() doesn't correctly set the fw
error if the platform has already been initialized.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Marc Orr <marcorr@google.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Message-Id: <20211208191642.3792819-3-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Mirrors should not be able to call LAUNCH_START. Remove the call on the
mirror to correct the test before fixing sev_ioctl() to correctly assert
on this failed ioctl.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Marc Orr <marcorr@google.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Message-Id: <20211208191642.3792819-2-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use common KVM implementation of MMU memory caches
- SBI v0.2 support for Guest
- Initial KVM selftests support
- Fix to avoid spurious virtual interrupts after clearing hideleg CSR
- Update email address for Anup and Atish
-----BEGIN PGP SIGNATURE-----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=Ao1E
-----END PGP SIGNATURE-----
Merge tag 'kvm-riscv-5.17-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv changes for 5.17, take #1
- Use common KVM implementation of MMU memory caches
- SBI v0.2 support for Guest
- Initial KVM selftests support
- Fix to avoid spurious virtual interrupts after clearing hideleg CSR
- Update email address for Anup and Atish
- Simplification of the 'vcpu first run' by integrating it into
KVM's 'pid change' flow
- Refactoring of the FP and SVE state tracking, also leading to
a simpler state and less shared data between EL1 and EL2 in
the nVHE case
- Tidy up the header file usage for the nvhe hyp object
- New HYP unsharing mechanism, finally allowing pages to be
unmapped from the Stage-1 EL2 page-tables
- Various pKVM cleanups around refcounting and sharing
- A couple of vgic fixes for bugs that would trigger once
the vcpu xarray rework is merged, but not sooner
- Add minimal support for ARMv8.7's PMU extension
- Rework kvm_pgtable initialisation ahead of the NV work
- New selftest for IRQ injection
- Teach selftests about the lack of default IPA space and
page sizes
- Expand sysreg selftest to deal with Pointer Authentication
- The usual bunch of cleanups and doc update
-----BEGIN PGP SIGNATURE-----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=HkZk
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 5.16
- Simplification of the 'vcpu first run' by integrating it into
KVM's 'pid change' flow
- Refactoring of the FP and SVE state tracking, also leading to
a simpler state and less shared data between EL1 and EL2 in
the nVHE case
- Tidy up the header file usage for the nvhe hyp object
- New HYP unsharing mechanism, finally allowing pages to be
unmapped from the Stage-1 EL2 page-tables
- Various pKVM cleanups around refcounting and sharing
- A couple of vgic fixes for bugs that would trigger once
the vcpu xarray rework is merged, but not sooner
- Add minimal support for ARMv8.7's PMU extension
- Rework kvm_pgtable initialisation ahead of the NV work
- New selftest for IRQ injection
- Teach selftests about the lack of default IPA space and
page sizes
- Expand sysreg selftest to deal with Pointer Authentication
- The usual bunch of cleanups and doc update
When a task is writing to an fd opened by a different task, the perm check
should use the cgroup namespace of the latter task. Add a test for it.
Tested-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When a task is writing to an fd opened by a different task, the perm check
should use the credentials of the latter task. Add a test for it.
Tested-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
0644 is an odd perm to create a cgroup which is a directory. Use the regular
0755 instead. This is necessary for euid switching test case.
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
We add initial support for RISC-V 64-bit in KVM selftests using
which we can cross-compile and run arch independent tests such as:
demand_paging_test
dirty_log_test
kvm_create_max_vcpus,
kvm_page_table_test
set_memory_region_test
kvm_binary_stats_test
All VM guest modes defined in kvm_util.h require at least 48-bit
guest virtual address so to use KVM RISC-V selftests hardware
need to support at least Sv48 MMU for guest (i.e. VS-mode).
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-and-tested-by: Atish Patra <atishp@rivosinc.com>
We add EXTRA_CFLAGS to the common CFLAGS of top-level Makefile which will
allow users to pass additional compile-time flags such as "-static".
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-and-tested-by: Atish Patra <atishp@rivosinc.com>
Reviewed-and-tested-by: Sean Christopherson <seanjc@google.com>
Current release - regressions:
- Revert "xsk: Do not sleep in poll() when need_wakeup set",
made the problem worse
- Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in
__fixed_phy_register", broke EPROBE_DEFER handling
- Revert "net: usb: r8152: Add MAC pass-through support for more
Lenovo Docks", broke setups without a Lenovo dock
Current release - new code bugs:
- selftests: set amt.sh executable
Previous releases - regressions:
- batman-adv: mcast: don't send link-local multicast to mcast routers
Previous releases - always broken:
- ipv4/ipv6: check attribute length for RTA_FLOW / RTA_GATEWAY
- sctp: hold endpoint before calling cb in
sctp_transport_lookup_process
- mac80211: mesh: embed mesh_paths and mpp_paths into
ieee80211_if_mesh to avoid complicated handling of sub-object
allocation failures
- seg6: fix traceroute in the presence of SRv6
- tipc: fix a kernel-infoleak in __tipc_sendmsg()
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xIOF
-----END PGP SIGNATURE-----
Merge tag 'net-5.16-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski"
"Networking fixes, including fixes from bpf, and WiFi. One last pull
request, turns out some of the recent fixes did more harm than good.
Current release - regressions:
- Revert "xsk: Do not sleep in poll() when need_wakeup set", made the
problem worse
- Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in
__fixed_phy_register", broke EPROBE_DEFER handling
- Revert "net: usb: r8152: Add MAC pass-through support for more
Lenovo Docks", broke setups without a Lenovo dock
Current release - new code bugs:
- selftests: set amt.sh executable
Previous releases - regressions:
- batman-adv: mcast: don't send link-local multicast to mcast routers
Previous releases - always broken:
- ipv4/ipv6: check attribute length for RTA_FLOW / RTA_GATEWAY
- sctp: hold endpoint before calling cb in
sctp_transport_lookup_process
- mac80211: mesh: embed mesh_paths and mpp_paths into
ieee80211_if_mesh to avoid complicated handling of sub-object
allocation failures
- seg6: fix traceroute in the presence of SRv6
- tipc: fix a kernel-infoleak in __tipc_sendmsg()"
* tag 'net-5.16-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits)
selftests: set amt.sh executable
Revert "net: usb: r8152: Add MAC passthrough support for more Lenovo Docks"
sfc: The RX page_ring is optional
iavf: Fix limit of total number of queues to active queues of VF
i40e: Fix incorrect netdev's real number of RX/TX queues
i40e: Fix for displaying message regarding NVM version
i40e: fix use-after-free in i40e_sync_filters_subtask()
i40e: Fix to not show opcode msg on unsuccessful VF MAC change
ieee802154: atusb: fix uninit value in atusb_set_extended_addr
mac80211: mesh: embedd mesh_paths and mpp_paths into ieee80211_if_mesh
mac80211: initialize variable have_higher_than_11mbit
sch_qfq: prevent shift-out-of-bounds in qfq_init_qdisc
netrom: fix copying in user data in nr_setsockopt
udp6: Use Segment Routing Header for dest address if present
icmp: ICMPV6: Examine invoking packet for Segment Route Headers.
seg6: export get_srh() for ICMP handling
Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register"
ipv6: Do cleanup if attribute validation fails in multipath route
ipv6: Continue processing multipath route even if gateway attribute is invalid
net/fsl: Remove leftover definition in xgmac_mdio
...
amt.sh test script will not work because it doesn't have execution
permission. So, it adds execution permission.
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Fixes: c08e8baea7 ("selftests: add amt interface selftest script")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20220105144436.13415-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* kvm-arm64/selftest/irq-injection:
: .
: New tests from Ricardo Koller:
: "This series adds a new test, aarch64/vgic-irq, that validates the injection of
: different types of IRQs from userspace using various methods and configurations"
: .
KVM: selftests: aarch64: Add test for restoring active IRQs
KVM: selftests: aarch64: Add ISPENDR write tests in vgic_irq
KVM: selftests: aarch64: Add tests for IRQFD in vgic_irq
KVM: selftests: Add IRQ GSI routing library functions
KVM: selftests: aarch64: Add test_inject_fail to vgic_irq
KVM: selftests: aarch64: Add tests for LEVEL_INFO in vgic_irq
KVM: selftests: aarch64: Level-sensitive interrupts tests in vgic_irq
KVM: selftests: aarch64: Add preemption tests in vgic_irq
KVM: selftests: aarch64: Cmdline arg to set EOI mode in vgic_irq
KVM: selftests: aarch64: Cmdline arg to set number of IRQs in vgic_irq test
KVM: selftests: aarch64: Abstract the injection functions in vgic_irq
KVM: selftests: aarch64: Add vgic_irq to test userspace IRQ injection
KVM: selftests: aarch64: Add vGIC library functions to deal with vIRQ state
KVM: selftests: Add kvm_irq_line library function
KVM: selftests: aarch64: Add GICv3 register accessor library functions
KVM: selftests: aarch64: Add function for accessing GICv3 dist and redist registers
KVM: selftests: aarch64: Move gic_v3.h to shared headers
Signed-off-by: Marc Zyngier <maz@kernel.org>
The get-reg-list test ignores the Pointer Authentication features,
which is a shame now that we have relatively common HW with this feature.
Define two new configurations (with and without PMU) that exercise the
KVM capabilities.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Link: https://lore.kernel.org/r/20211228121414.1013250-1-maz@kernel.org
- Fix TUI exit screen refresh race condition in 'perf top'.
- Fix parsing of Intel PT VM time correlation arguments.
- Honour CPU filtering command line request of a script's switch events in
'perf script'.
- Fix printing of switch events in Intel PT python script.
- Fix duplicate alias events list printing in 'perf list', noticed on
heterogeneous arm64 systems.
- Fix return value of ids__new(), users expect NULL for failure, not
ERR_PTR(-ENOMEM).
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYdHBrgAKCRCyPKLppCJ+
J8C0AQDT9JKQlNPMETD5F2leq0YB5O3wGKwMvgff0hyblArU7QD/Yq7d1XgMkshF
lb2dEJfGIyClnrgtTo9nikraESM5JwE=
=RTLi
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.16-2022-01-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix TUI exit screen refresh race condition in 'perf top'.
- Fix parsing of Intel PT VM time correlation arguments.
- Honour CPU filtering command line request of a script's switch events
in 'perf script'.
- Fix printing of switch events in Intel PT python script.
- Fix duplicate alias events list printing in 'perf list', noticed on
heterogeneous arm64 systems.
- Fix return value of ids__new(), users expect NULL for failure, not
ERR_PTR(-ENOMEM).
* tag 'perf-tools-fixes-for-v5.16-2022-01-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf top: Fix TUI exit screen refresh race condition
perf pmu: Fix alias events list
perf scripts python: intel-pt-events.py: Fix printing of switch events
perf script: Fix CPU filtering of a script's switch events
perf intel-pt: Fix parsing of VM time correlation arguments
perf expr: Fix return value of ids__new()
When the following command is executed several times, a coredump file is
generated.
$ timeout -k 9 5 perf top -e task-clock
*******
*******
*******
0.01% [kernel] [k] __do_softirq
0.01% libpthread-2.28.so [.] __pthread_mutex_lock
0.01% [kernel] [k] __ll_sc_atomic64_sub_return
double free or corruption (!prev) perf top --sort comm,dso
timeout: the monitored command dumped core
When we terminate "perf top" using sending signal method,
SLsmg_reset_smg() called. SLsmg_reset_smg() resets the SLsmg screen
management routines by freeing all memory allocated while it was active.
However SLsmg_reinit_smg() maybe be called by another thread.
SLsmg_reinit_smg() will free the same memory accessed by
SLsmg_reset_smg(), thus it results in a double free.
SLsmg_reinit_smg() is called already protected by ui__lock, so we fix
the problem by adding pthread_mutex_trylock of ui__lock when calling
SLsmg_reset_smg().
Signed-off-by: Wenyu Liu <liuwenyu7@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: wuxu.wu@huawei.com
Link: http://lore.kernel.org/lkml/a91e3943-7ddc-f5c0-a7f5-360f073c20e6@huawei.com
Signed-off-by: Hewenliang <hewenliang4@huawei.com>
Signed-off-by: yaowenbin <yaowenbin1@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 0e0ae87422 ("perf list: Display hybrid PMU events with cpu
type") changes the event list for uncore PMUs or arm64 heterogeneous CPU
systems, such that duplicate aliases are incorrectly listed per PMU
(which they should not be), like:
# perf list
...
unc_cbo_cache_lookup.any_es
[Unit: uncore_cbox L3 Lookup any request that access cache and found
line in E or S-state]
unc_cbo_cache_lookup.any_es
[Unit: uncore_cbox L3 Lookup any request that access cache and found
line in E or S-state]
unc_cbo_cache_lookup.any_i
[Unit: uncore_cbox L3 Lookup any request that access cache and found
line in I-state]
unc_cbo_cache_lookup.any_i
[Unit: uncore_cbox L3 Lookup any request that access cache and found
line in I-state]
...
Notice how the events are listed twice.
The named commit changed how we remove duplicate events, in that events
for different PMUs are not treated as duplicates. I suppose this is to
handle how "Each hybrid pmu event has been assigned with a pmu name".
Fix PMU alias listing by restoring behaviour to remove duplicates for
non-hybrid PMUs.
Fixes: 0e0ae87422 ("perf list: Display hybrid PMU events with cpu type")
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/1640103090-140490-1-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As Paolo pointed out, the result of ping IPv6 address depends on
the running distro. So explicitly checking the available ping feature,
as e.g. do the bareudp.sh self-tests.
Fixes: 8b3170e075 ("selftests: net: using ping6 for IPv6 in udpgro_fwd.sh")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Link: https://lore.kernel.org/r/825ee22b-4245-dbf7-d2f7-a230770d6e21@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2021-12-31
We've added 2 non-merge commits during the last 14 day(s) which contain
a total of 2 files changed, 3 insertions(+), 3 deletions(-).
The main changes are:
1) Revert of an earlier attempt to fix xsk's poll() behavior where it
turned out that the fix for a rare problem made it much worse in
general, from Magnus Karlsson. (Fyi, Magnus mentioned that a proper
fix is coming early next year, so the revert is mainly to avoid
slipping the behavior into 5.16.)
2) Minor misc spell fix in BPF selftests, from Colin Ian King.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, selftests: Fix spelling mistake "tained" -> "tainted"
Revert "xsk: Do not sleep in poll() when need_wakeup set"
====================
Link: https://lore.kernel.org/r/20211231160050.16105-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, userfaultfd selftest for hugetlb as run from run_vmtests.sh
or any environment where there are 'just enough' hugetlb pages will
always fail with:
testing events (fork, remap, remove):
ERROR: UFFDIO_COPY error: -12 (errno=12, line=616)
The ENOMEM error code implies there are not enough hugetlb pages.
However, there are free hugetlb pages but they are all reserved. There
is a basic problem with the way the test allocates hugetlb pages which
has existed since the test was originally written.
Due to the way 'cleanup' was done between different phases of the test,
this issue was masked until recently. The issue was uncovered by commit
8ba6e86408 ("userfaultfd/selftests: reinitialize test context in each
test").
For the hugetlb test, src and dst areas are allocated as PRIVATE
mappings of a hugetlb file. This means that at mmap time, pages are
reserved for the src and dst areas. At the start of event testing (and
other tests) the src area is populated which results in allocation of
huge pages to fill the area and consumption of reserves associated with
the area. Then, a child is forked to fault in the dst area. Note that
the dst area was allocated in the parent and hence the parent owns the
reserves associated with the mapping. The child has normal access to
the dst area, but can not use the reserves created/owned by the parent.
Thus, if there are no other huge pages available allocation of a page
for the dst by the child will fail.
Fix by not creating reserves for the dst area. In this way the child
can use free (non-reserved) pages.
Also, MAP_PRIVATE of a file only makes sense if you are interested in
the contents of the file before making a COW copy. The test does not do
this. So, just use MAP_ANONYMOUS | MAP_HUGETLB to create an anonymous
hugetlb mapping. There is no need to create a hugetlb file in the
non-shared case.
Link: https://lkml.kernel.org/r/20211217172919.7861-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
udpgro_fwd.sh output following message:
ping: 2001:db8:1:💯 Address family for hostname not supported
Using ping6 when pinging IPv6 addresses.
Fixes: a062260a9d ("selftests: net: add UDP GRO forwarding self-tests")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
udpgso_bench_tx call setup_sockaddr() for dest address before
parsing all arguments, if we specify "-p ${dst_port}" after "-D ${dst_ip}",
then ${dst_port} will be ignored, and using default cfg_port 8000.
This will cause test case "multiple GRO socks" failed in udpgro.sh.
Setup sockaddr after parsing all arguments.
Fixes: 3a687bef14 ("selftests: udp gso benchmark")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/ff620d9f-5b52-06ab-5286-44b945453002@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The intel-pt-events.py script displays only the last of consecutive switch
statements but that may not be the last switch event for the CPU. Fix by
keeping a dictionary of last context switch keyed by CPU, and make it
possible to see all switch events by adding option --all-switch-events.
Fixes: a92bf335fd ("perf scripts python: intel-pt-events.py: Add branches to script")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211215080636.149562-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
CPU filtering was not being applied to a script's switch events.
Fixes: 5bf83c29a0 ("perf script: Add scripting operation process_switch()")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211215080636.149562-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Parser did not take ':' into account.
Example:
Before:
$ perf record -e intel_pt//u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.026 MB perf.data ]
$ perf inject -i perf.data --vm-time-correlation="dry-run 123"
$ perf inject -i perf.data --vm-time-correlation="dry-run 123:456"
Failed to parse VM Time Correlation options
0x620 [0x98]: failed to process type: 70 [Invalid argument]
$
After:
$ perf inject -i perf.data --vm-time-correlation="dry-run 123:456"
$
Fixes: e3ff42bdeb ("perf intel-pt: Parse VM Time Correlation options and set up decoding")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211215080636.149562-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
